Digital Stereo CD
Clock Radio
(with remote control)
29000
OPERATING INSTRUCTIONS
Illustration
1
2
3
4
5
6
33
7
8
32
31
30
9
29
28
27
10
11
12
26
25
13
14
15
24
23
22
21
19 18 17
16
20
1
2
3
4
5
6
7
8
9
Led clock display
Snooze/Snooze set button
Repeat indicator
Random indicator
FM Stereo Indicator
CD open button
Remote sensor
Alarm 2 indicator
CD Stop button
1 8 Volume control
1 9 Function selector switch
2 0 Battery compartment
2 1 Time set button
2 2 Alarm 1 selector switch
2 3 Wake up track set button
2 4 Sleep button
2 5 Mono/stereo selector switch
2 6 Alarm 1 set button
2 7 Band selector switch
2 8 Alarm 2 set button
2 9 Power on button
3 0 Power off button
3 1 Dial scale
1 0 CD Play/Pause button
1 1 Tuning control
1 2 Skip/search forward button
1 3 Skip/search reverse button
1 4 CD Repeat button
1 5 CD Random button
1 6 Alarm 2 selector switch
1 7 Phone jack
3 2 Alarm 1 indicator
3 3 PM indicator
2
Illustration remote control
38
39
34
35
40
41
36
37
Location of remote controls for CD functions
To use, point the remote control at the remote sensor (7).
34 Stop button
35 Skip search reverse button
36 Repeat button
37 Sleep set button (Use the skip/search forward or skip/search reverse
button with the sleep button to set the sleep time).
38 Play/pause button
39 Skip search forward button
40 Random button
41 Power on button
Batteries for remote control
1
2
3
Slide the battery compartment cover off.
Insert 2 x AA batteries. (Ensure batteries are inserted correctly).
Replace the battery compartment cover.
3
Electrical requirements
Check the voltage on the rating plate of your CD player corresponds with
your house electricity supply which must be A.C. (Alternating current).
For CD players with a fitted plug
If the socket outlets in your home are not suitable for the plug supplied with
this appliance the plug should be removed and the appropriate one fitted.
IMP0RTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED,
MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.
Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse
must be fitted.
If in doubt, consult a qualified electrician.
Battery back-up facility (will operate without a battery fitted)
Your CD player is equipped with a battery back-up facility.
1
2
3
Remove the battery compartment cover (20) (located underneath the
unit) by sliding in the direction of the arrow.
Insert a battery size 9 volts PP3/6LR61 (Ensure the battery is inserted
correctly)
Replace the battery compartment cover.
Should a power interruption occur the clock will continue to run, however, time
keeping will not be accurate. The display will be extinguished to conserve
battery life but the memory will retain details of the clock time and alarm
settings.
Battery back-up is designed to operate for a short period only.
If the unit is not to be used for a prolonged period, remove the battery to
avoid battery leakage.
In the interests of environmental safety:dispose of batteries safely.
4
Switching on, and setting the clock time
Before any alarm functions can be used on your CD alarm clock radio you must
first set the clock to the correct time.
1
Place the unit on a flat surface. Plug the mains plug into the wall socket
and switch on the wall socket.
The LED clock display (1) will flash.
Press and hold the TIME SET button (21) and simultaneously hold down
the SKIP SEARCH FORWARD button (12). The LED clock display (1)
will advance the minutes and hour segments. Release all buttons when the
correct time is set.
2
3
4
5
Press and hold the TIME SET button (21) and simultaneously hold down
the SKIP SEARCH REVERSE button (13) will adjust the clock time in the
reverse direction.
The PM indicator (33) will illuminate to indicate 12.00 midday has been
reached.
Power On/Off
The unit must be switched on before the radio or CD functions can operate.
1
2
Switch the unit on by pressing the power ON button (29).
Switch the unit off by pressing the power OFF button (30).
Setting the clock alarm time
The alarm function can be set to operate on the following functions:
wake to radio, wake to buzzer alarm or wake to any CD programmed track.
1
2
Press and hold the ALARM 1 SET button (26) and simultaneously hold
down the SKIP SEARCH FORWARD button (12). The clock display (1) will
advance the minutes and hour segments. Release all buttons when the
correct alarm time is reached.
Press and hold the ALARM 1 SET button (26) and simultaneously hold
down the SKIP SEARCH REVERSE button (13) alarm time will adjust in the
reverse direction.
To set alarm 2 follow the above procedure using the ALARM 2 set button.
5
3
4
Slide the Alarm 1 selector switch (22) or Alarm 2 selector switch (16) to
select your wake up mode:
-To MUSIC position for Radio or CD alarm mode.
-To BUZZ position for alarm buzzer sound.
-To OFF position to turn alarm function off.
Once the Alarm switch has been activated the ALARM indicator
(32) or (8) will illuminate.
Setting the alarm to wake to radio
1
Set the required alarm time by pressing and holding the ALARM 1 SET
button (26) or ALARM 2 SET button (28) and simultaneously the SKIP
SEARCH FORWARD button (12) to fast forward or the SKIP SEARCH
REVERSE button (13) to reverse.
2
3
Slide the function selector switch (19) to the RADIO position.
Select the required waveband by sliding the BAND selector switch
(27) to either FM or MW and turning the TUNING control (11) to the
station you wish to use for the alarm.
4
5
Set the VOLUME control (18) to the desired level.
Slide the ALARM selector switch (22) or (16) to the MUSIC position. (The
ALARM indicator (32) or (8) will illuminate.
To stop listening to the radio press the power OFF button (30).
6
Ensure the radio station will be transmitting at the preset alarm time.
Setting the alarm to wake to buzzer
1
Set the alarm time as described (1) above.
At the desired wake up time the buzzer can be set to operate. If you do not
switch off the buzzer it will sound for a set period and then automatically switch
off. If you press the power OFF button (30) the alarm will operate again 24
hours later.
2
Set ALARM 1 selector switch (22) or the ALARM 2 selector switch (16) to
the buzz position. Alarm indicator (32) or (8) will illuminate.
Alarm buzz will operate at the preset alarm time.
6
Setting the alarm to wake to CD
1
Push the CD OPEN button down and place a CD into the compartment.
Ensure the CD is pressed firmly into position then close the door correctly.
Set the required alarm time as per setting alarm procedure.
Switch the function selector switch (19) to CD.
Slide the ALARM selector switch (22) or (16) to the MUSIC position.
(ALARM indicator (32) or (8) will illuminate).
2
3
4
5
Using the wake up track system below you may set the CD track of your
choice.
At the wake up time, the CD will play until the end of the disc unless the
REPEAT function is activated, then it will play continuously for approximately 2
hours.
6
Press the STOP button (9) or the power Off button (30) if you wish to
stop the CD playing at any time.
If you fail to insert a CD into the CD player the alarm will automatically default
to the buzzer alarm.
To wake up to your favourite cd track
The unit may be set to play any preselected CD track of your choice.
1
2
Press and hold the wake up track set button (23) and simultaneously hold
down the SKIP SEARCH FOWARD button (12) to select the track number.
The display will indicate the selected track.
Press and hold the wake up track set button (23) and simultaneously hold
down the SKIP SEARCH REVERSE button (13) will adjust the tracks in
the reverse direction.
It is only possible to set the same track for both alarm settings.
7
Cancelling the alarm
The alarm is programmed to run for 1 hour and 59 minutes.
1
2
To cancel the alarm press the power OFF button (30).
(The alarm will automatically activate 24 hours later).
If the alarm is no longer required slide the alarm selector switch (22) or
(16) to the OFF position. (The alarm indicator will switch off).
Snooze function
You can press the SNOOZE/SNOOZE SET button (2) after the alarm has
sounded which allows 9 minutes of snooze time. After 9 minutes the alarm will
sound again. The snooze time can be varied between 1-30 minutes if required.
1
2
When the alarm, buzzer or CD sounds press the SNOOZE/SNOOZE SET
button (2). (The snooze default is set for 9 minutes.)
To set your own snooze time, press the SNOOZE/SNOOZE SET button (2)
together with the SKIP SEARCH FORWARD (12) button to advance the
minutes.
Press and hold the SNOOZE/SNOOZE SET button (2) and simultaneously
hold the SKIP SEARCH REVERSE button (13) to adjust the minutes in the
reverse direction.
3
Release the buttons when the required snooze time is reached.
The snooze function will cease to operate after a set period.
Sleep function
The sleep function sets the unit to play the radio or CD whilst you go to sleep
and will switch off after a set time.
1
2
Slide the function selector switch (19) to CD or RADIO.
To use the sleep facility press the SLEEP button (24).
(The sleep default is set for 59 minutes after which the unit will
automatically switch off).
8
3
4
The sleep time can be varied between 1 minute to 1 hour 59 minutes.
To set your own sleep time, press the SLEEP button (24) together with the
SKIP SEARCH FORWARD (12) button to advance the minute and hour
segments. Press and hold the SLEEP button (24) and simultaneously hold
down the SKIP SEARCH REVERSE button (13) will adjust the minute and
hour segments in the reverse direction.
5
6
Release the buttons when the required sleep time is reached.
If you want to turn off the music before the end of the programme press
the power OFF button (30) or the SNOOZE/SNOOZE SET button (2).
If the CD play time is shorter than the selected sleep time, the music will stop
unless the repeat button has been pressed.
When the sleep time has expired the radio or CD will switch off.
Listening to CD
1
2
Push the CD OPEN button (6) downwards and Insert the CD.
Set the function selector switch (19) to the CD position and press the
power ON button (29). (The LED display (1) will show ‘cd’.
Press the PLAY/PAUSE button (10) and the unit will play the first track.
(The LED display (1) will show the number of the CD track for a few
seconds and then will revert to the clock setting.)
3
If a CD has not been placed into the player the LED display (1) will show ‘nd’.
4
Pressing the PLAY/PAUSE button (10) will pause the CD, the track number
will show on the LED display (1).
5
6
Pressing the PLAY/PAUSE button (10) again will resume play.
Press the STOP button (9) and the CD will stop playing.
9
CD functions
SKIP SEARCH FORWARD button (12)
1
2
To search to the next CD track press the SKIP/SEARCH FORWARD
button or press repeatedly to skip forwards several tracks.
To fast forward through the current track press and hold the SKIP/SEARCH
SET button.
SKIP/SEARCH SET REVERSE button (13)
1
2
To return to the beginning of the playing track press the SKIP SEARCH
REVERSE button or press repeatedly to skip backwards several tracks.
To search backwards through the current track press and hold the SKIP
SEARCH REVERSE button.
REPEAT button (14)
1
2
Press the repeat button to repeat the whole CD.
The CD repeat indicator (3) will illuminate. (The unit will continuously
repeat the whole CD)
3
Press the repeat button again to switch off the repeat function.
‘nd’ showing on the Display
‘nd’ on the LED display indicates that the disc compartment is empty or that the
disc has been loaded incorrectly or that the disc is damaged and cannot be
read by the CD player.
RANDOM button (15)
1
2
3
Press the RANDOM button (15) the indicator (4) will light.
The cd player will select tracks at random to be played.
To deselect press the RANDOM button.
10
Listening to the radio
1
2
Press the power ON button (29).
Slide the function selector switch (19) to the RADIO position, switch
the BAND selector switch (27) and switch to mono or stereo using the
selector switch (25).
3
4
Turn the tuning control (11) and tune to the desired station.
Adjust the volume control (18) to the desired level.
(If the FM station is being received in stereo the STEREO indicator (5) will
light).
5
Press the power OFF button (30) to turn the radio off.
To obtain the maximum reception fully extend the wire FM aerial (which is
located at the rear of the unit)and alter the direction of the wire for best
results.
The aerial for the MW waveband is located inside the unit. To obtain, the
maximum MW reception rotate your CD clock radio.
11
Maintenance
Do not expose your CD alarm clock radio to extremes of temperature. The
product should be kept in a warm environment free from dust and damp. For
external cleaning use only a soft, clean, damp cloth. Use of detergents may
damage the finish.
Notes regarding Compact Disc Players
If there is a scratch, dirt or finger prints on the CD, it may cause tracking
errors.
Before playing, clean the CD with a clean cloth. Wipe the CD from the centre
outwards.
After playing, store the disc in its CD case.
Technical specification
Power supply
:
:
230v
50Hz
Battery back-up
Radio
9V DC type 6LR61/PP3
:
:
FM 88Mhz - 108Mhz
MW 540Khz - 1600Khz
Earphones
Stereo earphone jack socket.
Caution
This unit uses a laser beam. To prevent an accident occuring the unit should
only be opened by a qualified engineer.
If the door interlocks become defective the laser may cause invisible radiation.
Avoid exposure to the beam.
12
Guarantee
Morphy Richards products are manufactured to internationally accepted quality
standards. In addition to your statutory rights, Morphy Richards guarantee
your product to be free from manufacturing and component defects for a
period of TWO YEARS from date of purchase.
If your product proves to be defective within 28 days of purchase, your
Morphy Richards dealer from whom the product was purchased will be pleased
to replace it free of charge.
Should your product develop a defect within the guarantee period but after
the replacement period, please return the product to the following address,
together with the proof of purchase, brief details of the symptoms and your
own name and address.
Morphy Richards Limited
Talbot Road
Mexborough
South Yorkshire
S64 8AJ
Your post office will provide a certificate of posting. The product will be
repaired and returned to you promptly.
If you need any further advice, please call our Helpline
(UK local rate) on: 08450 777700 (Mon-Fri)
13
Warning labels
ATTENTION: To reduce the risk of electric shock, do not
remove the cover. There are no user serviceable parts
inside the unit. Refer any servicing to qualified personnel.
The lightning flash with arrowhead symbol within the triangle is a
warning sign alerting the user of ‘dangerous voltage’ inside the unit.
The exclamation point within the triangle is a warning sign alerting
the user of important instructions accompanying the product.
CAUTION: Invisible laser radiation when open and interlocks
defective. Avoid exposure to the beam.
WARNING: to reduce the risk of electric shock, do not expose this
appliance to rain or moisture.
14
446/8001/50 Rev OI
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
|