QUICK REFERENCE GUIDE
Mitel® 5610 IP DECT Cordless Handset
Turn Handset On or Off
Signal Range
Press and hold
key.
The cordless handset has an indoor
signal range of up to 150 feet (50
meters) from the IP DECT stand. This
range can be limited by concrete or
metal barriers. If you go out of range
and then return back into range, the
handset will display MISSED CALL.
The Mitel 5610 Cordless Handset and IP DECT (Digital Enhanced Cordless
Telecommunications) Stand provides Mitel 5000 SIP call processing features on a
cordless handset. The IP DECT stand also provides conferencing, call transfer, and
other basic features between handsets.
Handset - Side View
Handset - Front View
#
Front View - Description
Color display
1
2
Press ꢀꢁꢂꢃto navigate menus
and services
Press
to make or answer calls
3
4
5
Use the keypad to enter numbers and
letters
Use
in the name editor to capitalize
letters, type numbers, and enter the star
symbol
Earpiece
6
7
Press
to enter main menu and
select and confirm options
Softkeys used for various functions
8
9
To hang up, exit a menu, and turn the
handset on or off, press
.
Pound key
ꢀ
Microphone
#
Side View - Description
Loudspeaker for speakerphone
1
2
Speakerphone activate and deactivate
key
Headset jack connector (2.5 mm)
3
4
5
Volume Up key
Volume Down key
Part Number 57011425
Mitel is a registered trademark of Mitel Networks Corporation. © 2010, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
1
QUICK REFERENCE GUIDE
Call Swap
Listen to Voice Mail Message
Call swap lets you alternate between two calls. Each call is private; neither person
can overhear your conversation with the other.
If a message is left in your voice mailbox, MISSED CALL and then NEW
VOICEMAIL appears in the handset display. A small envelope icon is displayed at
the top of the main display.
1. While on a call, press HOLD.
1. Press
to enter main menu.
2. Enter the number of the second party that you want to call and press
.
2. Select MESSAGES, and then select VOICEMAIL.
3. After speaking with the second party, press OPTIONS and select SWAP
CALLS to switch between the two parties.
3. Select your voice mail account.
4. Press PLAY. You are connected with the voice mail auto attendant. The auto
Form a Conference
attendant prompts you for your passcode.
To form a Conference when a two-party call is already in place:
1. Press HOLD. The current call is placed on hold.
5. Enter your passcode. If necessary, contact your System Administrator to obtain
your passcode.
6. Follow the prompts to access your message(s).
2. Enter the number of the second party, and then press
.
3. After the second party answers, press OPTIONS and then select
Change Handset Language
CONFERENCE.
1. Press
to enter main menu.
4. Press END CONF to remain connected with the second party only.
2. Select SETTINGS.
5. Press OPTIONS and then select SWAP CALLS switch between the two parties.
3. Select SYSTEM SETTINGS.
Change the Ringer Melody
4. Enter your PIN code (default is 0000) and press
System Administrator to obtain your PIN code.
. If necessary, contact your
1. Press
to enter the main menu.
5. Select LANGUAGE.
2. Select SETTINGS, and then AUDIO SETTINGS.
3. Select RINGER MELODY, and then select VoIP.
4. Select ALL LINES.
6. Select the desired language and press
.
Transfer a Call - Unsupervised
5. Select a melody from the list and press
6. Press PLAY to listen to the melody and then press STOP.
7. Press to select the desired melody.
.
1. While on a call, select press HOLD. The current call is placed on hold.
2. Press OPTIONS, and then select TRANSFER.
3. Dial the extension of the transfer destination.
4. Press
or
.
Transfer a Call - Supervised
1. While on a call, press HOLD. The current call is placed on hold.
2. Dial the extension of the transfer destination.
3. Press
or
.
4. Wait until the called party answers, and then announce the transfer.
5. Press OPTIONS, and then select TRANSFER.
3
QUICK REFERENCE GUIDE
Check Call Log
Remove Belt Clip Cover
1. From idle mode, press CALL LOG.
2. Select the type of calls: Missed, Incoming, Outgoing, or All Calls.
3. Select the call.
Use the belt clip removal tool. Insert the tool between the belt clip cover and the
phone.Then, using your thumb, press down and slide the clip up and off the back of
the phone.
4. Press
.
About Feature Access Codes
You can dial feature access codes for Emergency Calls (911 U.S. or 999/112
Europe) and Outgoing Calls (8). You do not have to press
before entering a code.
Your system may be programmed with different codes. Contact your System
Administrator to obtain the codes assigned for your system.
Call Handoff
If your handset is twinned to your desktop phone using the Dynamic Extension
Express (DEE) feature, you can use the DEE Handoff feature. This feature allows
you to “push” an active call from your desktop phone to your 5610 handset. You can
activate call handoff by pressing a DEE Handoff feature key (fc 388) on your
desktop phone. To program a DEE Handoff feature key, refer to your phone’s user
guide for instructions.
To push a call to your 5610 handset:
1. While on a call at your desktop phone, press the DEE Handoff key. The call is
transferred to your 5610 handset.
Attach Belt Clip
2. Press
to continue the call on your handset.
Insert the clip belt into the back of the handset. Slide the clip down with your thumb
to snap the side tabs into place.
4
QUICK REFERENCE GUIDE
Troubleshooting
Symptom
Possible Cause
Corrective Action
Unable to remove belt You are not inserting the removal Insert the removal tool as shown
clip cover using removal tool far enough into the opening in the graphic on the previous
tool.
between the handset and clip
cover.
page.
Handset display is
black.
Handset is in power saving
mode.
Press any key.
Battery is drained.
Put handset in charging cradle to
recharge battery.
Handset does not
charge.
Power to handset charging
cradle is not connected.
Ensure that power cable is
inserted in handset charging
cradle.
Battery is not inserted correctly. Check that the battery is inserted
correctly. Refer to Installation
Guide for details.
Battery life is exceeded and no Obtain replacement battery from
longer accepts charge.
your System Administrator and
replace.
Cannot enable features Feature is not enabled for your Contact your System
using Feature Access
Codes.
handset.
Administrator and ask to have the
feature enabled for your handset.
System does not use default
Feature Access Codes.
Contact your System
Administrator for a list of the
supported Feature Access Codes
for your system.
5
|