Miele COFFEE SYSTEM WITH CONVERTIBLE WATER CONNECTION CVA 4066 User Manual

Operating and Installation

Instructions

Coffee System

with convertible water connection

CVA 4066

en - US, CA

To prevent accidents

and appliance damage

read these instructions

before

installation or use.

M.-Nr. 07 818 660

Contents

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Tone options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Showroom program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Restoring factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Setting the serving sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

User profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Selecting a user profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Quick Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Descaling the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Adjusting the door hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances basic safety precautions should always be

followed, including the following:

Read all instructions before installation or use of the coffee system.

Proper use

Please read these instructions

This coffee system is for household

carefully to prevent accidents and

use only (up to 20 cups per day), for

machine damage.

the preparation of coffee beverages

such as espresso, cappuccino, latte

This appliance complies with current

macchiato, etc.

safety requirements. Improper use

Do not use this machine other than for

of the appliance can cause personal

its intended use. Any other use could

injury and material damage.

be hazardous.

This coffee system is not suitable for

Read this safety information carefully

before operating the appliance.

They contain important information

on the safe installation, operation,

and care of your coffee system. To

avoid the risk of personal injury or

damage to the coffee system, it is

important that you carefully read the

instructions.

outdoor use.

Persons which lack physical,

sensory or mental abilities or

experience with the machine should not

use it without supervision or instruction

by a responsible person.

Children

Keep them in a safe place and pass

them on to any future user.

Close supervision is necessary

when any appliance is used by or near

children. They could easily be scalded

or burned.

Never let children play with the

coffee system.

Install the appliance in an area

where it will not be accessible to

children.

IMPORTANT SAFETY INSTRUCTIONS

Technical safety

Before service or maintenance

disconnect the power supply by either

removing the fuse, "tripping" the circuit

breaker or unplugging the unit.

Before installing the appliance,

check for externally visible damage.

Do not operate a damaged appliance.

This appliance is not designed for

maritime use or for use in mobile

Before connecting the appliance to

the electrical supply make sure that the

voltage and frequency listed on the

data plate correspond with the

installations such as recreational

vehicles or aircraft. However, under

certain conditions it may be possible for

installation in these applications. Please

contact the Miele Technical Service

Department with specific requirements.

household electrical supply. If in doubt,

consult a qualified technician.

Be certain your appliance is

properly installed and grounded by a

qualified technician. To guarantee the

electrical safety of this appliance,

continuity must exist between the

appliance and an effective grounding

system. It is imperative that this basic

safety requirement be met. If there is

any doubt, have the electrical system of

the house checked by a qualified

electrician.

The unit is designed for a cold water

connection. Do not connect it to hot

water, it will get damaged.

The water supply must be

accessible after installation.

Do not damage or kink the cover of

the water intake hose.

The waterproof system will only work if:

–

it is installed correctly.

The appliance must be properly

–

it is damaged, the machine

repaired or faulty parts replaced.

the water supply is shut off when

not using the coffee system for an

extended period of time,

installed before operation to ensure that

no electrical components are

accessible. Ensure that power is not

supplied to the appliance while

installation work, repairs or

–

e.g. vacationing.

maintenance is performed.

Installation work and repairs must

Do not use an extension cord to

only be performed by a trained

technician in accordance with national

and local safety regulations. Repairs

and other work by unauthorized

persons could be dangerous and may

void the warranty.

connect the appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance

(danger of overheating and open

ground circuit).

If the appliance is installed behind a

door front, use the appliance only when

the door front is open. Do not close the

door front when the appliance is in

operation.

IMPORTANT SAFETY INSTRUCTIONS

While the appliance is under

Use

warranty repairs should only be

performed by an authorized service

technician. Otherwise the warranty is

void.

Caution! Do not look directly or with

an optical instrument into the

lighting - laser radiation.

Defective components should be

replaced by Miele original spare parts

only. Only with these parts can the

manufacturer guarantee the safety of

the appliance.

Caution! Risk of burns when

dispensing hot beverages, they are

extremely hot.

Before the first use, flush the supply

To protect against fire, electric

lines for water and milk and thoroughly

clean the coffee system and

shock and injury to persons do not

submerge the cord or plugs in water or

other liquids.

stainless-steel milk container.

Only fill the water tank with cold,

Do not let the cord hang over the

edge of a table or counter, or touch hot

fresh tap water. Warm or hot water, or

any other liquids may damage the

machine. The water should be changed

daily to prevent bacteria or mold

growth.

surfaces.

Do not operate any appliance with a

damaged cord or plug, or after the

appliance malfunctions or has been

damaged in any manner. Contact

Miele.

Do not use deionized or mineral

water. They may lead to heavy calcium

built-up in the machine that can

damage the unit.

Always attach the cord to the

appliance first, then plug it into the wall

outlet. To disconnect, turn the machine

off, then remove the plug from the wall

outlet.

Do not put anything but coffee

beans into the beans container. Do not

put ground coffee in the beans

container, it will damage the grinding

unit.

Never open the outer casing of the

appliance. Tampering with electrical

connections or components and

mechanical parts is dangerous and

may cause machine damage.

Do not fill anything but ground

coffee or a cleaning tablet (for the brew

unit) in the funnel for ground coffee,

otherwise it will get damaged.

If installed in combination with

Only use plain milk. Flavored milk

products contain substances that can

another appliance, a protective base

must be installed between the coffee

system and the appliance.

clog the coffee system.

Install or locate this appliance only

in accordance with the provided

installation instructions.

IMPORTANT SAFETY INSTRUCTIONS

Sugar can damage the appliance!

The appliance must be descaled

Caramelized or otherwise pre-treated

coffee beans or other sugar containing

beverages must not be put in the

machine.

regularly with the supplied descaling

tablets. In areas with very hard water

the machine may need to be descaled

more often.

Never place a cup with an

alcohol-coffee mixture underneath the

Only use the descaling tablets

provided by Miele. Take care to use the

main dispenser. Plastic parts of the unit correct mixture of water and descaler,

could catch fire!

otherwise it may cause damage.

The hot water and steam dispensed

could cause scalding. These functions

Depending on the oil content of the

coffee, the brew unit may clog. Clean

must be used carefully. Never hold any the brew unit every 200 cups with a

parts of the body under the steam

nozzle or the hot water dispenser. The

machine must never be used to clean

objects.

cleaning tablet. The display shows a

reminder message.

Dispose of the coffee waste in a

trash can, not in the sink. The sink

Never use a steam cleaner to clean

could get clogged.

the appliance. Pressurized steam could

damage electrical components and

cause a short circuit.

Do not hang, lean, sit or place heavy

items on the door. The machine could

be damaged.

Clean the coffee system daily to

The use of accessory attachments

prevent bacterial growth. All parts of

the coffee system are dishwasher-safe

except for the brew unit, bean

not recommended by the appliance

manufacturer may result in fire, electric

shock or injury to persons.

container, stainless-steel milk container

and lid, and main dispenser cover.

Failure to properly maintain machine

may cause health issues.

The appliance is designed for use in

room temperatures between 59 °F and

140 °F (15 °C and 60 °C). Do not use

the appliance outside of this range of

temperatures.

Be aware of how long milk in stored

in the milk container. If milk is not

continually cooled it can readily spoil

causing illness. Be sure the milk

container and pipework are properly

cleaned and maintained. See "Cleaning

and Care" for more information.

SAVE THESE INSTRUCTIONS

AND REVIEW THEM

PERIODICALLY

To avoid injuries allow the coffee

system to cool before cleaning or

putting on and taking off parts. Turn the

machine off at the main switch when

not in use and before cleaning.

Guide to the coffee system

Front view

aOn/Off s touch control

bDisplay

cLeft arrow <, to scroll through program options

dOK touch control, to confirm selected program options and save settings

eRight arrow >, to scroll through program options

fHot water - touch control

gDoor grip

hHot water dispenser

iLighting

jDrip tray

kMain dispenser, height-adjustable

lStainless-steel milk container

Guide to the coffee system

Interior view

aMain switch

bStorage drawer

cGround coffee chute

dGrind control slide

eCoffee bean container

fDrip tray with no-spill grid for transport

gWater tank

hBrew unit

iWaste unit

jMain dispenser connector (connects the brew unit to the main dispenser)

kStainless-steel milk container

lMain dispenser connector cap

Guide to the coffee system

Included accessories

Cleaning agent

Stainless steel milk container

For daily cleaning of the milk pipework

Cleaning tablets

To hold and insulate milk, with

lid/handle and additional cover for

storing milk in the refrigerator (not

dishwasher-safe)

To clean the brew unit

Descaling tablets

Cleaning containers

To descale the coffee system

Large and small, for rinsing and

cleaning the milk pipework

Additional accessories are available.

Contact Miele or visit the Miele

website for more information

Coffee spoon

To measure ground coffee

First steps to use

Touch controls

Before the first use

Select a touch control with your

fingertip to use the machine.

The appliance must be correctly

installed and connected before the

first use. See "Electrical connection",

"Plumbing" and "Installation

instructions".

Display

Espresso

Clean the appliance and remove

any protective film before the first

use. See "Cleaning and Care".

The main menu in the display shows

the following symbols:

Espresso

Coffee

Turning on

^ Select On/Off s to turn the machine

on.

Cappuccino

Latte macchiato

Hot milk

The first few times the machine is

turned on with the main switch, a

welcome screen will appear briefly on

the display, followed by additional

messages. The welcome screen is

displayed each time the machine is

turned on until 5 drinks have been

prepared:

Milk froth

User profile for up to nine

different users

G Maintenance programs

C Settings: to customize

your coffee system

Míele

Welcome

^ Use the arrow buttons to select a

program item from the display. Once

highlighted, confirm with OK.

During the very first use, you will be

prompted to select a language.

^ Tap < or > until the desired language

appears in the display.

^ Confirm with OK.

The language is now set.

First steps to use

You will then be prompted to set the

If everything has been entered

correctly, Set up successful will

appear in the display.

Time format.

^ Tap < or > until the time format you

wish to select (12-hour or 24-hour) is

highlighted, confirm with OK.

^ Confirm the message with OK.

Turning off

^ Enter the Time of day: First set the

hours using < or >, confirm with OK.

Repeat to set the minutes.

^ Tap the On/Off button s to turn the

machine off.

^ Now specify when the time of day

If the automatic rinse feature is

enabled, the machine will start the

rinse cycle as soon as a coffee or

milk-based drink has been

should be displayed:

– On: The time will be displayed even

when the machine is turned off.

dispensed. It will not shut off until

after the rinse cycle is complete.

– On for 60 seconds: The time will be

displayed for 60 seconds after

the machine has been turned off.

– Do not display: The display will go

dark as soon as the machine is

turned off.

Preparing your appliance for

an extended vacaion

^ Confirm with OK.

If you elect to turn off the water to your

home for an extended period of time,

please note that this may not be

^ Select OK to confirm the message

indicating that your coffee system is

communication enabled.

enough to reduce the risk of a leak.

To be completely safe, you must

turn off the water supply to each

individual appliance. This means

under the sink for a dishwasher, at

the laundry bib for your washer, etc.

Filling water, beans or ground coffee

Clean the appliance thoroughly

before loading the water tank and

bean container (see "Cleaning and

care").

Be sure to enter the water

hardness (see "Settings - Water

hardness").

^ Pull the water tank out.

Filling the water tank

^ Fill the container with fresh, cold tap

The beans and the water quality is

important for a good espresso or

coffee. The water tank must be washed

and filled with fresh cold drinking water

before each day of use. The unit

water to the "Max." mark.

The valve on the water tank ensures

that water cannot leak out.

^ Close the lid and push the water tank

displays a reminder when turned on.

into the unit until it clicks into place.

Never add hot water or any other

liquids except cold water to the

water tank.

The water tank must be positioned

correctly or the valve will leak. If the

water tank has not clicked into

place, pull the tank out, check and

clean the niche.

Do not use deionized or mineral

water. They may lead to heavy

calcium built-up in the machine that

can damage the unit.

^ Open the appliance door.

Filling water, beans or ground coffee

Filling the bean container

Filling ground coffee

A funnel for ground coffee is provided

in case you would like to prepare a

different coffee type, e.g. decaffeinated

coffee.

Only fill espresso or coffee beans in

the beans container. Anything else -

including ground coffee - will

damage the grinding unit.

Caramelized, flavored or otherwise

pre-treated beans or sugar

containing beverages must not be

filled into the appliance. It will

damage the coffee system.

^ Pull the bean container out.

^ Pull the storage drawer out of the

appliance and lift the funnel lid, a.

^ Place one spoonful of ground coffee

into the funnel, b, (using the

supplied spoon) and close the lid.

^ Push the drawer back into the

appliance and close the door.

^ Push the lid back and fill the

See "Preparing drinks - Espresso and

coffee made from ground coffee".

container with roasted coffee beans.

^ Push the lid back into place and put

the beans container back into the

appliance.

^ Close the door.

Preparing drinks

Clean the coffee system daily to

prevent bacterial growth. All parts of

the coffee system are

Rinsing

dishwasher-safe except for the brew

unit, bean container, stainless-steel

milk container and lid, and main

dispenser cover. Failure to properly

maintain machine may cause health

issues. See "Cleaning and Care".

Water will now flow from the main

dispenser and into the drip tray.

The machine will notify you when the

drip tray is full, but the tray should be

emptied daily.

The main menu then appears in the

display:

The lines should be rinsed daily

before the first use. This will happen

automatically if the rinsing feature is

set to "On" (see "Settings - Rinse

Automatic") and the machine is cold.

After heating, hot water runs out of

the two spouts into the drip tray. If

the rinse feature was set to "Off",

select "Rinsing" to rinse the lines.

See "Cleaning and Care - Rinsing

the system".

Espresso

Pre-warming cups

All beverages should be made in a

warm cup, to develop the aroma. The

smaller the amount of coffee or

espresso and the thicker the cups, the

more important it is to pre-warm the

cups.

Turning on

^ Select On/Off s.

^ Place an empty cup under the hot

water spout.

The following message appears in the

display:

^ Select hot water -.

^ Hot water is dispensed. Select OK to

Heating phase

stop the flow.

^ Let the hot water sit for a moment to

pre-warm the cup, then empty the

cup and prepare the beverage.

If the automatic rinse feature is set to

"on" (factory default), the following

message is displayed after the heating

phase:

Preparing drinks

Adjusting main dispenser

height

Espresso

The height of the main dispenser can

be adjusted, to keep the shortest

distance to the cup and retain heat,

and maintain a better crema and froth.

^ Use the arrow buttons to select the

desired beverage, confirm by

tapping OK once.

The machine grinds the beans and

pre-brews the coffee (if "On" is selected

under "Pre-brewing"). The selected

beverage is dispensed.

Do not open the appliance door

during the brewing process. The

appliance will be damaged.

Discard the very first two coffees

dispensed once you have started to

using the appliance, this will ensure

that any coffee residue from factory

testing is eliminated from the brew

unit.

^ Slowly pull the main dispenser up or

down as desired.

Coffee and espresso prepared

from coffee beans

Espresso, coffee, double espresso, and

double coffee are all prepared in the

same way:

^ Place a cup under the main

dispenser.

The beverage is dispensed through

both dispensers at the same time.

Preparing drinks

Double portion

Coffee and espresso prepared

from ground coffee

If you would like a double portion of

coffee or espresso, or to prepare two

portions at the same time,

After filling the funnel with ground

coffee (see "Filling water, beans or

ground coffee - Filling ground coffee"),

the display shows:

^ tap the OK button a second time,

while the display reads "2 portions?".

Make the coffee?

The two portions are always prepared

Yes

one after the other.

^ Tap < or > until "Yes" is highlighted.

Select "No" if no ground coffee is filled

in the funnel. Otherwise the coffee

system assumes that ground coffee is

in the machine and dispenses only

water the next time coffee is made.

The display reverts to the main menu,

and you can select the desired

beverage type.

^ To fill two cups at the same time,

place one cup under each spout.

Be sure to wait for 2 dispensing

cycles to be completed before

removing the cups.

Interrupting preparation

^ Tap OK when you see "Stop" in the

display.

Preparation will immediately stop.

Preparing drinks

Prepare beverages

Beverages with milk

^ Place a cup under the main spout.

^ Tap the OK button.

Stainless steel milk container

The stainless steel milk container is

vacuum insulated, to keep milk cold for

a period of time. With an ambient

temperature of about 68°F (20°C), milk

at 43°F (6°C) can be stored for 11-12

hours and remain under 55°F (13°C).

(Milk that is warmer than 55°F (13°C)

should not be used because it will not

make good milk froth.)

The appliance brews the espresso or

coffee, and the selected beverage is

dispensed from the main spout.

Do not open the appliance door

during the brewing process. The

appliance will be damaged.

After dispensing, the appliance

automatically reverts to bean

operation.

Milk cannot be stored as long if there is

a warming drawer underneath the

coffee machine.

Interrupt preparation

Do not fill the container to the rim,

leave a gap of approx. 1" - 1 ½"

(2 - 3 cm) from the top.

^ During preparation, tap the OK

button when "Stop" appears in the

display.

Preparation will immediately stop.

Make sure to keep the top and seals

of the container clean. Soiling can

cause affect the functioning of the

milk container.

If you use ground coffee, only one

serving is prepared at a time. The

appliance always uses the entire

portion of ground coffee loaded into

the funnel, for one beverage.

Cold milk is best for creating froth.

Always pre-warm the cup with hot

water, before you prepare a beverage.

Preparing drinks

To prepare beverages with milk,

Cappuccino, latte macchiato, hot

milk, froth

^ Place a suitable cup or glass under

both dispensers.

For best results when preparing a

latte macchiato, place the glass

under the spout in such a way that

the espresso flows into the middle of

the froth.

^ place the lid on the stainless steel

milk container and turn the lid to the

left, so that it clicks into place.

Cappuccino

^ Tap the right arrow button until the

beverage symbol is highlighted, tap

OK once.

^ To interrupt preparation, tap OK

again.

To set the proportions for beverages

(coffee, espresso, froth, hot milk),

see "Setting serving sizes").

^ Open the appliance door and hang

the milk container in the appliance

(as shown).

After preparing the first drink with

milk the reminder "Clean the milk

pipework" will appear in the display.

^ Close the appliance door.

^ Tap OK to return to the main menu.

This reminder will not appear after each

additional drink.

Preparing drinks

User profile beverages

After use

The user profile function is used to

prepare beverages to suit your taste,

by adjusting the amounts of water, milk,

and ground coffee, as well as

Before turning the machine off, or at

the end of the day, flush the water

lines, the brew unit, the spouts and

the milk pipework in order to prevent

the machine from clogging (see

"Cleaning and care").

temperature and pre-brewing (see

"Creating a user profile").

If you have already created a user

profile, first select it then prepare the

beverage.

User profile

^ Tap < or > until "User profile" is

highlighted, confirm with OK.

^ Tap < or > to select "Select", confirm

with OK.

^ Use < or > to select the desired user

profile, confirm with OK.

A large user profile n symbol will

appear in the display to show that a

profile has been selected.

You can now operate the appliance

as you would for a "standard" profile.

Adjusting the coffee grinder

The finer the coffee beans are ground

determines the strength of the coffee

and the quality of the crema.

To adjust the grinder setting

To prevent machine damage adjust

the coffee grinder one level at a

time and let the beans grind before

adjusting another notch. Otherwise

the machine will be damaged.

^ Push the slide control to the left for a

finer grind or to the right for a coarser

grind.

You should be able to feel the notches

when moving the slide control.

The grinder should be adjusted:

– If the espresso flows too quickly into

the cup, the pressure cannot be built

up because the beans have been

ground too coarsely. The grinder

should be adjusted to a finer setting.

If the slide control will not move:

^ Close the machine and dispense a

cup of coffee.

Then try to move the slide control

again.

– If the espresso only trickles into the

cup, the beans have been ground

too fine and the coffee will be bitter.

The grinder should be adjusted to a

coarser setting.

– If the crema is evenly colored but

pale, the ground coffee is too

coarse.

– If the crema is very dark brown on

one side, graduating almost to white

on the other, the ground coffee is too

fine.

Settings

The coffee system can be customized

to suit individual preferences.

Language

You can select the language for all text

and messages displayed on your

machine.

Settings menu

^ Select "Settings F" and confirm with

OK.

Settings F

Settings

Language F

Time

^ Tap < or > until Settings C is

highlighted. Confirm with OK.

^ Tap OK.

^ Tap < or > until the desired option is

highlighted and confirm with OK.

^ Tap < or > until the language you

wish to select is highlighted.

The current setting(s) will be marked

with a check.

^ Confirm with OK.

To return to the previous options in the

This setting is automatically saved, and

the display returns to the previous

screen.

manu, select "Back A".

The possible setting options are

described in detail on the following

pages.

All display text will now appear in the

language selected.

If you select the wrong language

accidently, follow the flag icon F to

find the "Language" option.

Settings

Time of day

Clock format

^ Select "Settings F", confirm with OK.

^ Use < or > to select "Clock format".

^ Tap < or > to select a 24-hour or

Settings

Time of day

Timer

12-hour display.

^ While the desired options is

highlighted, confirm with OK.

^ Tap < or > until "Time of day" is

highlighted, confirm with OK.

The clock format is now saved.

Three options are now available:

Setting the time of day

Display

^ Use < or > to select "Set".

The time display can be turned on or

off.

^ Tap < or > to set the hours. Confirm

with OK. Repeat to set the minutes.

^ Use < or > to select "Display".

The time of day is now saved.

You can now choose from among three

settings:

You can also set the time of day and

change the display options when the

coffee machine is turned off.

– "On": The time will be displayed

even when the machine is turned off.

– "On for 60 seconds": The time will

be displayed for 60 seconds after

the machine has been turned off.

While the machine is off:

^ Select the OK button.

^ Select the "Time of day" and confirm

– "Do not display": The display will go

dark as soon as the machine is

turned off.

with OK.

You can now select "Display" or

"Settings" and set or change as

desired.

^ Once a display format has been

selected, confirm the setting with OK.

^ Confirm with the OK button to save

the setting.

Settings

Timer

Switch off after

^ Select "Settings F", confirm with OK

The machine will turn off automatically

to save energy after a programmed

period of time (ranging from 15 minutes

to 9 hours after the last use). When the

"Switch off after" option is set, the

Settings

Timer

Coffee jug

machine will turn off automatically after

the programmed amount of time.

^ Select < or > until "Timer" is

highlighted, confirm with OK.

^ Use < or > to select "Switch off after",

^ Use < or > to select "Set", confirm

confirm with OK.

with OK.

A display of 1:00, for example,

indicates that the machine will turn off

after one hour.

Three options are now available:

Switch on at

^ Tap < or > to set the hours. Confirm

You can program your machine to turn

on automatically at a certain time, for

example, at breakfast time.

with OK. Repeat to set the minutes.

The machine will now turn off after the

programmed amount of time.

^ Tap < or > to select "Switch on at",

confirm with OK.

If the automatic rinse feature is

turned on, and the machine has

been used to prepare a beverage, it

will always run a brief rinse cycle

before turning off.

^ Tap < or > to set the hours. Confirm

with OK. Repeat to set the minutes.

The machine will turn on each day at

the specified time once you have

activated the timer (see "Activate").

If the machine is turned on

automatically three times and no

beverages were dispensed, the

machine will no longer turn on

automatically. The programmed

times stay saved and will be

activated again when the machine is

manually turned on the next time.

This safety measure is designed so

that the machine does not turn on

every day if the setting was not

canceled before a longer time of

absence, e.g. vacationing.

Settings

Switch off at

Coffee jug (dispensing several

servings, one directly after

another)

A specific time of day can be set to turn

the coffee system off.

With this function, you can dispense up

to eight servings of coffee one

^ Use < or > to select "Switch off at",

confirm with OK.

immediately after another (max. 1 qt /

1 l). The brewing process will run

automatically for all servings.

^ Tap < or > to set the hours. Confirm

with OK. Repeat to set the minutes.

The machine will turn on each day at

the specified time one you have

activated the timer (see "Activate").

^ From the main menu, select

"Settings F" then tap ok.

Settings

If the automatic rinse feature is

turned on, and the machine has

been used to prepare a beverage, it

will always run a brief rinse cycle

before turning off.

Coffee jug

Prog. the amount

^ Tap the right arrow button until

“Coffee jug” is highlighted and then

tap the OK button

^ Using the arrow button, select the

number of servings you wish to be

dispensed (3 to 8) and confirm with

OK.

Activate

^ Use < or > to select "Activate",

confirm with OK.

The program items "Switch on at" and

"Switch off at" are displayed.

^ Place the desired container under the

main dispenser and follow the

instructions on the display.

Activate

Each cup of coffee will be individually

ground, brewed and poured.

8 Switch on at

Switch off at

Meanwhile, the display reports on the

process while it is going on. You can

interrupt the process at any time by

tapping the OK button ("Stop").

^ Use < or > to select the program

item(s) you wish to activate.

Tap OK to activate (select the check

box) or deactivate (clear the check

box) the desired option.

^ When the display shows the process

is complete, confirm with OK.

^ Use < or > to select "Accept", confirm

with OK.

^ Use < or > to select "Back A",

confirm with OK.

Settings

Amount of coffee

Pre-brewing

The amount of coffee will determine

During the pre-brew step, the freshly

both the strength and the crema of your ground coffee is first moistened with hot

brewed coffee.

water. After a short steeping period, the

remaining water is then forced through

the moistened coffee at high pressure.

This process produces a much more

intense coffee aroma.

Depending on the type of coffee, the

ideal amount ranges from

approximately 0.2 ounces and 0.5

ounces (6 g to 14 g per) cup. The

higher the value, the stronger the

prepared espresso, coffee, latte

macchiato, or cappuccino will be.

If the function is turned off, the hot

water will be immediately pushed at a

high pressure through the ground

coffee.

The crema is also influenced by the

amount of coffee.

You can program normal or long

pre-brew or turn the pre-brew function

off. The default factory setting for the

pre-brew function of your machine is

Off (= without).

– If the crema has an even but

white/yellow coloring, the ground

amount might be too little.

– If the crema is dark brown to black in

color on the one side and almost

white on the other side, the amount

of coffee might be too much.

^ Select "Settings F", and confirm with

OK.

Settings

Pre-brewing

Temperature

^ Using < or > select Settings F, and

confirm with OK.

^ Tap < or > until "Pre-brewing" is

Settings

highlighted, confirm with OK.

Amount of coffee

Pre-brewing

^ Tap < or > until the desired pre-brew

setting is highlighted.

^ Tap < or > until "Amount of coffee" is

highlighted, confirm with OK.

Tap OK to save the setting.

^ Use < or > to select a beverage,

confirm with OK.

^ Using < or > adjust the amount of

coffee to "more" or "less".

^ To save the setting, tap OK.

Settings

Temperature

Automatic rinsing

Five temperature settings are available

for each coffee selection and three

settings for hot water.

It is important to flush out any residual

coffee from the lines when starting to

use the machine for the day. If the

automatic rinse function is activated

and the machine is cold, the rinse cycle

will begin automatically as soon as the

machine is turned on. This will also

pre-heat the lines with the hot water

used during the rinse cycle. This is

indicated by a message in the display.

If a beverage has already been made,

the machine will also automatically run

a rinse cycle just before turning off.

Not every coffee type allows high

temperatures. Some types react so

sensitively that the crema cannot be

properly built.

^ Select "Settings F", and confirm with

OK.

Settings

Temperature

Automatic rinsing

The factory default setting for the

^ Tap < or > until "Temperature" is

automatic rinse function is On.

highlighted, confirm with OK.

If you do not want the rinse water to

collect in the drip tray, always place an

empty cup or the small cleaning

container underneath the main

dispenser.

^ Tap < or > until the beverage is

highlighted in which you wish to set

the temperature for. Confirm with OK.

^ Tap < or > until the desired

temperature is highlighted.

^ Select "Settings F", confirm with OK.

^ Tap OK to save the setting.

Settings

Automatic rinsing

Steam system

^ Tap < or > until "Automatic rinsing" is

highlighted, confirm with OK.

^ Tap < or > to select "On" or "Off",

confirm with OK.

It is recommended that you set this

program option to "On" to ensure

that the rinse cycle will not be

forgotten.

Settings

Steam system

Lighting: Adjusting the

brightness

This appliance has two heating

systems, making it possible for you to

prepare milk froth/hot milk and

The brightness of the machine lighting

can be adjusted.

coffee/espresso, one right after the

other. If you seldom need milk froth or

hot milk, you can turn the steam heating

system off to save energy.

^ Select "Settings F", confirm with OK.

Settings

Lighting

Info

If you select milk froth or hot milk

with the steam heating system

turned off, it will take a little longer,

as the heater is only turned on once

a milk option is selected.

^ Tap < or > until "Lighting" is

highlighted, confirm with OK.

^ Select "Brightness", confirm with OK.

^ Use < or > to select a lighter or

The steam heating system will

remain On until the machine has

been turned off completely.

darker setting.

^ Confirm with OK to save the setting.

To turn the lighting off:

^ Select "Settings F", confirm with OK.

^ Tap < until the small white bars are

Settings

no longer visible.

Steam system

Lighting

^ Tap < or > until "Steam system" is

highlighted, confirm with OK.

^ Tap < or > to select "On" or "Off".

^ Tap OK to save the setting.

Settings

Lighting: Setting the switch-off ^ Select "Lighting", confirm with OK.

time

^ Select "Brightness", confirm with OK.

Whenever the machine is On, the

machine lighting is also On. The

^ To turn the lights off, tap < until the

small white bars are no longer visible.

lighting turns off automatically when the

machine has been idle for 15 minutes.

^ Select "Back A" symbol twice to exit

the menu.

When the machine is turned off, you

can program the lighting to remain On

and to shut off automatically after a

Info (displaying No. of drinks)

certain amount of time if the machine is The "Info" option allows you to display

not used

the number of beverages that have

been dispensed from the machine and

the number of beverages the machine

can still make before descaling is

necessary.

You can choose a duration from 15

minutes to 6 hours.

^ Turn the machine off.

^ With the machine turned off, confirm

^ Select "Settings F", confirm with OK.

with OK.

Settings

Info

^ Select "Lighting", confirm with OK.

^ Select "Switch off after", confirm with

Safety

OK.

^ Tap < or > until "Info" is highlighted,

^ Use < or > to select a switch-off time,

confirm with OK.

^ Use < or > to select "No. of drinks" or

"Portions until descaling", confirm

with OK.

^ Select "Brightness" and tap OK

^ Tap the arrow button to increase or

decrease the brightness, then tap OK

to save the setting (Factory Default:

Off).

Under "No. of drinks", you can display

"Total number of coffees" or a

breakdown according to each

individual coffee beverage, milk froth,

milk, and hot water.

^ Select "Back" symbol twice to exit the

menu.

^ Tap OK to go back to previous menu.

The machine will now automatically turn

the lighting off after the programmed

amount of time.

When the machine requires

descaling, you will be notified

automatically. It is not necessary to

check these messages regularly.

If you do not want the coffee machine

lighting on after the machine is turned

off (default setting):

^ With the machine turned off, tap OK.

Settings

System lock

Water hardness

The coffee system can be locked so

that it cannot be used by children or

those not familiar with the operating

instructions.

The hardness of the water used in the

coffee system must be determined and

programmed into the appliance. The

water hardness will determine how

frequently the unit must be descaled to

maintain the coffee system properly.

The machine monitors the volume of

water used (including the amount

required for producing steam), and will

then let you know when a descaling

cycle is necessary.

When the machine is locked, the timer

setting "Switch on at" will not work.

Activating/Deactivating the System

lock

^ Select "Settings F", confirm with OK.

To measure the hardness of your water,

use the test strip that is included in your

installation kit.

Settings

Safety

Water hardness

^ Use < or > to select "Safety", confirm

with OK.

^ Tap < or > until "System lock" is

highlighted, confirm with OK.

^ Use < or > to select "On", confirm

with OK.

As soon as the machine is turned off, it

will lock and cannot be turned back on.

A closed padlock X and a message

will appear in the display, whenever a

button is touched.

^ Place the test strip under your

kitchen tap for a second and shake

off any remaining water. The result is

visible in about 1 minute.

To deactivate the system lock, follow

the same procedure as above, but

select "Off".

If the water hardness is greater than

40 gr/gal (40°D), the water must be

descaled more often than displayed.

Calcium will build up faster than at a

lower water hardness and may

damage the machine.

Overriding the system lock

^ Press and hold OK for approx.

3 seconds.

The machine is now temporarily

unlocked and can be used to prepare

beverages. It will lock again as soon

as it is turned off.

Settings

You can program four hardness levels

on the machine:

Display

The display contrast and brightness

can be adjusted.

– Level 1 (soft):

0 - 3 gr/gal (0 - 3 °d)

^ Select "Settings F" , confirm with OK.

– Level 2 (moderately hard):

Settings

Display

4 - 7 gr/gal (4 - 7 °d)

– Level 3 (hard):

Volume

7 - 15 gr/gal (7 - 14 °d)

^ Tap < or > until "Display" is

– Level 4 (very hard):

highlighted, confirm with OK.

15 - 22 gr/gal (14 - 21 °d)

^ Tap < or > to select "Contrast" or

^ Select "Settings F", confirm with OK.

"Brightness", confirm with OK.

^ Tap < or > to adjust the contrast

lower or higher or make the display

brighter or darker.

Settings

Water hardness

Display

^ Tap < or > until "Water hardness" is

^ Tap OK to save the setting.

highlighted, confirm with OK.

^ Tap < or > to program the water

hardness level, confirm with OK.

The selected water hardness level is

now saved.

Settings

Tone options

Water supply

A tone can be selected to confirm the

This machine is designed for use with

selection of a touch control. The volume or without a plumbed water connection.

of the tone can also be adjusted.

If the "Plumbed water supply" option is

set to "On", water is automatically taken

into the water container. If the option is

set to "Off", the water tank will need to

be filled manually.

^ Select "Settings F", confirm with OK.

Settings

Volume

Plumbed water supply

^ Select "Settings F", confirm with OK.

^ Tap < or > until "Volume" is

Settings

highlighted, confirm with OK.

Plumbed water supply

Showroom prog.

^ Tap < or > to select "Buzzer tones" or

"Keypad tone", confirm with OK.

^ Tap < or > until "Plumbed water

^ Tap < or > to increase or decrease

supply" is highlighted, confirm with OK.

the volume.

^ Use < or > to select "On" or "Off",

If you continue to tap < all the way to

the left until you can no longer see the

small white bars, the sound will turn

off.

confirm with OK.

^ Tap OK to save the setting.

Settings

Showroom program

Factory default settings

The showroom program is used to

– Amount of coffee (medium)

demonstrate the machine at exhibits. In

this demo mode, the machine lighting is

On, but the machine does not heat up.

– Temperatures for coffee beverages

and hot water (medium for both)

– Pre-brewing (without)

Restoring factory default

settings

– Automatic rinse and steam system

(both On)

The "Factory default" setting can be

used to reset different settings back to

their original default status.

– Showroom program (Off)

– Time display (On for 60 seconds),

Time format (24 h),

You can select whether to reset all

Timer - Switch on at (12:00),

Timer - Switch off after (1:00),

Timer - Switch off at (12:00),

("Switch on at" and "Switch off at"

both deactivated)

settings or delete any user profiles.

^ Select "Settings F", confirm with OK.

Settings

Factory default

Back #

– Coffee jug (3 cups)

– Lighting: Brightness (medium)

– Safety: System lock (Off)

– Water hardness (very hard 4)

^ Tap < or > until "Factory default" is

highlighted, confirm with OK.

Two options are now available:

– Display: Contrast (medium),

Brightness (maximum)

User profiles

Selecting "User profiles" deletes all user

profiles that you have entered, leaving

only the default (standard) profile.

– Volume: Buzzer tones and keypad

tone (both at maximum setting)

– User profile: Revert (when machine is

turned on)

^ Under "User profiles", select "Reset",

confirm with OK.

– Plumbed water supply (On)

The user profiles are deleted.

All settings

If "Reset" is selected by accident,

turn the machine off before pressing

OK, the settings will not be reset.

Selecting "All settings" restores all

settings back to the factory default.

^ Under "All settings", select "Reset",

confirm with OK.

All settings are now reset to the default.

Setting the serving sizes

The flavor of a coffee beverage

depends not only on the type of coffee,

but also on the quantity of water used.

Not every espresso or cappuccino cup

is the same size. Use this feature to set

the volume of water to suit your taste

and cup sizes.

Setting serving sizes of

espresso, coffee, hot milk and

milk froth using OK

^ Place the desired cup under the main

dispensers.

^ Select the beverage type.

For beverages with milk the

proportions of espresso, milk, and froth

have an important impact on flavor. You

can set the appliance to suit your

preferences for cappuccino and latte

macchiato.

^ Press and hold OK until the display

reads "Prog. the amount".

^ Tap OK again once the cup is filled

to your desire. "Save" appears in the

display.

The programmed volume of water or

milk will now be dispensed each time

that particular drink is selected.

To program serving sizes, you can

either press and hold the OK button, or

via the "Settings" option.

Once the maximum water or milk

volume is reached, the appliance

automatically stops the water

When a user profile is activated, the

serving size is set for that particular

profile only.

supply. The maximum fill amount for

each beverage is then stored.

If you want to set the serving size for

all profiles, select the "Standard"

user profile.

If the water tank or milk container

becomes empty during portion

programming, the process is

canceled and the size is not stored.

Setting the serving sizes

Setting serving sizes for

cappuccino and latte

macchiato using OK

The appliance now begins preparing a

cappuccino or latte macchiato.

As soon as the component (which you

have checked) is being dispensed, the

display will read "Program the amount".

^ Place the cappuccino cup or latte

macchiato glass you will be using to

set the portion size under the main

dispensers.

^ Once the cup is full to your liking with

that component and "Save" appears

in the display, tap OK to save the

amount.

^ Select cappuccino or latte

macchiato.

^ Repeat this process for the other

components you have chosen for this

type of coffee.

^ Press and hold OK until the display

shows the options for Cappuccino

(Milk froth, Espresso) or Latte

Macchiato (Hot milk, Milk froth,

Espresso).

Each time the drink is prepared it will

contain the programmed amount of

coffee, milk, etc.

Latte Macchiato

8 Hot milk

8 Milk froth

^ Use < or > to reach the option you

wish to program to a certain serving

size.

^ Tap OK to place a check mark next

to the desired component to show

that you would like to program this

component.

^ Repeat this process until all

components you wish to program the

serving size for are marked with a

check.

^ Use < or > to select "Start", confirm

with OK.

Setting the serving sizes

Setting the serving size for hot Setting serving sizes via

water

"Settings"

^ Place the desired cup under the hot

^ Select "Settings F", confirm with OK.

water dispenser.

Settings

^ Tap - until the display reads "Prog.

the amount".

Prog. the amount

Amount of coffee

^ Tap - again once the cup is filled as

desired and "Save" appears in the

display.

^ Tap < or > until "Prog. the amount" is

highlighted, confirm with OK.

^ Use < or > to select the beverage

Each time the hot water is prepared the

programmed amount will be dispensed.

you wish to set a serving size for.

^ Select "Start", confirm with OK.

Proceed as you would for programming

using OK or - .

User profiles

If the appliance is used by several

people with different preferences, you

can save up to 9 individual user

profiles.

The following options appear only if you

have already created a user profile:

– Change user profile to change a

user profile.

The following settings can be

programmed for each user profile:

– Delete user profile to delete a user

profile.

– Serving size for coffee beverages

and hot water

– Revert: The appliance can be set so

that it automatically reverts to the

Standard user profile or continues to

use the most recently selected user

profile set.

– Serving size of milk for beverages

with milk

– Amount of coffee

– Water temperature

– Pre-brew

Selecting a user profile

^ Use < or > to select the user profile

See "Setting the serving sizes" and

"Settings".

you wish to use, confirm with OK.

Espresso

John

User profile

To show that a user has been selected,

the upper display line shows a large

user n symbol.

^ Tap < or > until "User profile" is

highlighted, confirm with OK.

You can now either:

– Select user profile from the profiles

already set.

– Create user profile to enter a new

user profile.

User profiles

Creating a user profile

Saving an entry

^ Tap < or > until "Create" is

^ Once you have completed an entry,

use < or > to select "OK", confirm

with OK.

highlighted, confirm with OK.

Up to 9 user profiles can be created.

If you try to create more than 9 user

profiles, the message "Memory full"

will appear, you will need to delete a

profile to create space.

The display will briefly show the User

profile welcome screen, followed by the

main menu.

Canceling an entry

Letters and numbers will now appear in

the display. Use < or > to select the

desired letters or numbers.

^ If you do not wish to save an entry

you have made, use < or > to select

"back A", confirm with OK.

A new word will always be capitalized,

the appliance will then switch to

lower-case letters.

Changing a user profile

^ Select "Change user profile", confirm

with OK.

^ Use < or > to select the desired

characters.

^ Select the user profile you wish to

change, confirm with OK.

^ Tap OK to confirm a character.

Continue as you would for "Creating a

user profile".

You will see the selected characters in

the top line of the display.

If you misspelled a word, use the

arrow buttons to select the trash can

symbol, confirm with OK. The last

character entered will be deleted.

User profiles

Deleting a user profile

Revert

^ Select "Delete user profile", confirm

The appliance can be set so that it

automatically reverts to the standard

user profile or continues to use the

most recently selected user profile set.

with OK.

^ Use < or > to select the user profile

you wish to delete, confirm with OK.

^ Use < or > to select "Revert".

A check mark appears after the user

profile, and it will be erased shortly.

You can now choose between:

Manually

The appliance retains the selected user

profile until another profile is selected.

^ Use < or > to select "Manually",

confirm with OK.

After dispensing

After each drink prepared, the

appliance automatically reverts back to

the standard user profile.

^ Use < or > to select "After each use",

confirm with OK.

When switched on

Each time the appliance is turned on,

the standard user profile will

automatically be selected, no matter

which user profile was set before it was

last turned off.

^ Use < or > to select "When switched

on", confirm with OK.

Cleaning and care

Quick Guide

The coffee machine must be cleaned regularly to prevent bacteria.

Recommended frequency

What needs to be done?

Every time milk is prepared, if there Rinse the milk pipework

is more than one hour between

uses

Rinse the system (intake lines)

Clean the milk lines (with cleaning powder)

Every day

Clean the stainless steel milk container and lid

Clean the main dispenser

Clean the water tank

(at least at the end of the day,

before you switch off the

appliance)

Clean the waste unit

Clean the drip tray and no spill grid

Clean the main dispenser connector

Clean the interior

Once a week

(more often if there is a heavy

soiling)

Clean the inside door tray

Clean the brew unit

Clean the front of the appliance (especially right after

descaling)

Once a month

Lubricate the cap on the main spout connection

Clean the brew unit (use the cleaning tablets)

Descale the appliance

Approx. every 200 portions

Depending on the water hardness

When necessary

Clean clogged milk pipework

Clean the bean container

Cleaning and care

Rinsing the system

Allow the coffee system to cool

before cleaning. Danger of burns!

Before switching your machine off for

an extended period of time, you should

clean the supply lines, the brew unit,

and the main dispenser.

Do not clean the unit with a steam

cleaner.

If you have turned off the automatic

rinse feature (see "Settings - Automatic

rinsing"), the lines will need to be rinsed

manually. When performing a manual

rinse cycle, it is recommended that you

place the small cleaning container

under the main dispenser.

Never use cleaners containing

chlorides, sand, baking soda or

scouring agents. These will damage

the surface.

To avoid mold, growth and odors it is

important to clean the machine

regularly.

Maintenance

All removable parts are

dishwasher-safe, except the following:

^ Tap < or > until "Maintenance m" is

highlighted, confirm with OK.

– Brew unit

^ Select "Rinse the system", confirm

– Bean container

with OK.

– Stainless-steel milk container and lid

– Main dispenser cover

^ Select "Start", confirm with OK.

When the main menu reappears in the

display, the lines have been rinsed. The

appliance can now be turned off.

When the parts are cleaned in the

dishwasher they might get discolored

by food residues such as tomatoes or

their surface coating may become

damaged.

Cleaning and care

Milk pipework

Cleaning the milk pipework

To prevent milk residue from spoiling or

drying in the machine and pipework, it

should be cleaned at the end of each

day milk was used to make a

beverage.

Rinsing the milk pipework

To prevent the milk residue from

spoiling or drying in the machine and

pipework, you should rinse these lines

after use. In addition to rinsing after

use, the lines need to be cleaned at

the end of the day.

^ If the milk pipework in the lid is

clogged, clean under running water

using the cleaning brush.

Insert the cleaning brush into the

pipework, and push it in and out.

Maintenance

^ Tap < or > until "Maintenance m" is

highlighted, confirm with OK.

^ Select "Rinse milk pipework", confirm

^ Tap < or > until "Maintenance m" is

highlighted, confirm with OK.

with OK.

^ Select "Start", confirm with OK.

^ Select "Clean milk pipework", confirm

with OK.

^ Follow the instructions in the display.

^ Select "Start", confirm with OK.

^ Follow the instructions in the display.

To rinse the pipework in the lid of the

stainless-steel milk container, fill the

large cleaning container to the

"max." mark with cold water.

Fit the lid of the stainless-steel milk

container into place on the large

cleaning container.

Place the cleaning container in the

appliance where the milk container

would normally sit.

Cleaning and care

Cleaning clogged milk pipework

If no milk, just steam, comes out of the

main dispenser, the milk pipework in

the appliance door may be clogged.

^ Take the lid off the main dispenser.

Pull out the nozzles of the main

dispenser (see "Main dispenser").

To rinse the pipework in the lid of the

stainless-steel milk container, fill the

large cleaning container to the

"max." mark with lukewarm water to

dissolve the cleaning agent.

^ Open the appliance door.

^ Remove the stainless steel milk

container and clean it, particularly the

lid (see "Stainless steel milk

container").

Fit the lid of the stainless-steel milk

container into place on the large

cleaning container.

Place the cleaning container in the

appliance where the milk container

would normally sit.

Use only Miele cleaning agent,

which was developed especially for

this coffee system. You can obtain

this cleaning agent from your Miele

dealer or the Miele.com website.

^ Unlock the cover for the milk

pipework by pressing in the two

brackets on the left and right.

The cleaning process has now begun.

When Prog. finished appears on the

display, the lines are clean, and you

can turn the machine off.

Cleaning and care

^ Insert the brush into the milk hoses

one after the other from below. Push

the brush back and forth to the end

until there is no more no milk residue

in the hoses.

^ Remove the cover with the milk

pipework. Clean the whole part in the

dishwasher without taking it apart.

If there are milk residues in the milk

pipework you can clean them with the

cleaning brush provided. To do this,

take the cover and the milk pipework

apart as follows:

Reassemble the milk pipework as

follows:

^ Push the retainer with the plug onto

the cover as shown. Make sure that

the retainer is sitting properly on the

cover.

Do not pull the milk hoses off the

retainers. This may cause the milk

pipework to leak.

^ Press the small recess on the

dispenser retainer a and pull the

retainer out towards the front b. Take

the milk hoses off the guide rail.

^ Grasp the second retainer by the

stud c and pull it up and off.

Now you can clean the hoses with the

brush under running water.

Cleaning and care

Stainless-steel milk container

The stainless-steel milk container

and lid must be cleaned by hand

with hot water.

Make sure to keep the top and seals of

the container clean. Soiling can cause

affect the functioning of the milk

container.

^ Then press the milk hoses into the

guide rail a and push the dispenser

retainer b on until it clicks into place.

^ Clean the stainless-steel container

with hot water.

^ Rinse the handle under running water

and then clean it thoroughly with a

damp cloth to remove all milk

residue.

^ Put the cover with the milk pipework

back into the rear of the appliance

door.

Reattach the main dispenser (see "Main

dispenser").

^ If the milk pipework in the lid is

clogged, clean under running water

using the cleaning brush.

Insert the cleaning brush into the line,

and push it in and out.

Cleaning and care

Main dispenser

^ Pull both rubber stoppers a out and

clean the stoppers and nozzles

thoroughly.

^ Pull the main dispenser all the way

down a and pull the cover forward to

remove b.

^ Pull the air intake pipe b out if

necessary. You can knead or blow

through the pipe to remove any

potential blockages.

Never use a sharp object to remove

blockages, this could damage the

parts.

^ Put the rubber stoppers back into

place.

^ Turn the cover around, slide the

insert upward and out, and clean

both parts thoroughly.

^ After cleaning the nozzles of the main

dispenser, slide them back into the

machine firmly upward to ensure they

are securely in place.

^ Slide the insert back into the cover

until it clicks into place.

^ Replace the cover and slide the main

^ Pull the nozzles of the main

dispenser up.

dispenser out.

Cleaning and care

Water tank

Waste unit

Empty the water tank daily and refill

before preparing the first drink with

fresh, cold tap water.

The display shows a message to empty

the waste unit. Clean the waste unit

daily. Coffee waste can mold if there is

water in the waste unit from the rinse

process.

Check if the valve is clean. If the

valve has residues on it, the water

tank will not connect properly and

might leak.

There may be water in the waste

container from the rinsing process. This

is normal.

Line the waste unit with a paper towel

to make for easier cleaning.

^ Pull the waste unit out.

^ Wash the waste container in the

dishwasher or by hand with hot water

and liquid dish soap.

Dry with a soft cloth.

^ Thoroughly clean the niche of the

waste unit in the machine.

^ For cleaning, remove the plastic

^ Push the waste unit completely into

spout from the lid of the water tank.

the machine.

^ Wash the water tank and the plastic

spout in the dishwasher or by hand

with hot water and liquid dish soap.

Dry with a soft cloth.

^ Clean the niche of the water tank.

Cleaning and care

Drip tray

^ Wash the drip tray and grid in the

dishwasher or by hand with hot water

and liquid dish soap, then dry with a

soft cloth.

The trip tray contains a sensor which

causes the display to show when the

tray is full and needs to be emptied.

Clean the drip tray daily.

Take care that the metal contacts at

the back of the drip tray are clean

and dry. If the contacts are soiled or

wet the unit cannot detect when the

drip tray is full and needs to be

emptied.

Remove the drip tray after the final

rinse when no more water runs from

the lines.

Carefully remove the drip tray from

the machine; the water may be very

hot and could cause scalding.

^ Open the door and pull the drip tray

out.

The drip tray contains a grid to avoid

spilling during transport.

^ Push the drip tray with grid along the

right edge all way in the machine.

^ Close the door.

Drip tray cover

^ Remove the drip tray cover and wash

it.

Cleaning and care

Bean container

Interior and door

^ Once all movable parts are removed

clean the interior with a solution of hot

water and liquid dish soap.

The bean container must be cleaned

by hand with hot water and liquid

dish soap. Do not use a

dishwasher.

Dry ground coffee can be vacuumed.

^ Pull the bean container out and push

the lid back.

^ Wash the bean container by hand

with hot water and liquid dish soap,

then dry with a soft cloth.

^ Push the lid back and reinsert the

bean container into the machine.

^ The lower part of the inner door has a

Main dispenser connector

drip tray. Clean the drip tray.

A connecting piece between the brew

unit and the main dispenser is located

on the inside of the door.

^ Clean this connector regularly with a

damp cloth without removing the

lubricant for the cap.

^ Lubricate the cap once a month with

the supplied food grade silicone

lubricant.

Cleaning and care

Brew unit

Manually clean the brew unit weekly.

The movable parts are lubricated

and the gaskets will get damaged in

the dishwasher. Do not use a

dishwasher this will cause damage.

^ Take out the water tank, waste unit

and the storage drawer.

^ Rub off any coffee residue from the

filters with a sponge. One filter is in

the funnel, a, the second is to the

left of the funnel, b.

^ Dry the funnel, a, to prevent ground

coffee from sticking.

^ Clean the interior and remove coffee

residues.

Dry coffee grounds can be vacuumed.

^ Press the light colored button on the

brew unit handle, a, and turn the

handle to the left, b.

^ Push the brew unit in the track

straight into the appliance.

^ Press the brew unit catch, c,

downwards and carefully pull the

brew unit out.

The brew unit is not in the correct

position if it is hard to pull out. See

"Frequently asked questions".

^ Clean the brew unit under running

warm water. Do not use soap.

^ Press the light colored button on the

brew unit handle, a, and turn the

handle to the right, b, to lock it into

place.

Leave the handle in position or the

brew unit cannot be inserted

properly.

Cleaning and care

Cleaning the brew unit

When the display prompts you to

Please drop the cleaning tablet in the

Depending on the oil content of the

coffee, the brew unit can clog. Clean

the brew unit approx. every 200 cups

with the enclosed detergent tablets.

They are specially developed for the

coffee maker to optimize the

ground coffee funnel.

degreasing. The cleaning tablets can

be purchased from Miele.

As a reminder the display shows

"Please run cleaning program" after

200 cups and then until the machine

is cleaned.

^ Remove the storage drawer and

open the funnel lid.

The cleaning process takes about 6

minutes.

^ Drop a cleaning tablet into the funnel.

^ Close the lid, replace the drawer, and

close the machine door.

Maintenance

^ Follow the instructions in the display.

^ When the display shows Prog.

^ Tap < or > until "Maintenance m" is

highlighted, confirm with OK.

finished, tap OK.

The brew unit is now degreased, and

the machine is ready for use.

^ Select "Clean brew unit", confirm with

OK.

^ Select "Start", confirm with OK.

^ Follow the instructions in the display.

To avoid having to empty the drip

tray too frequently, place the small

cleaning container beneath the main

dispenser.

The inside of the machine is also

rinsed, therefore you will still have to

empty the drip tray when prompted

during the cleaning process.

Cleaning and care

Exterior

To better maintain your appliance

avoid the following:

To avoid scratches or discoloration,

immediately remove any soiling from

the machine front.

– cleaners containing soda, ammonia,

thinners, or chlorides

– cleaners containing descaling

agents or lime removers,

^ Turn off the machine using the On/Off

button.

– abrasive cleaners,

^ The front of the appliance can be

cleaned with a sponge and a solution

of warm water and non abrasive

– stainless steel cleaners,

– caustic (oven) cleaners,

liquid dish soap. Dry with a soft cloth.

– scouring pads, steel wool, hard

brushes,

Only use a slightly damp sponge

when cleaning the controls. Water

could penetrate into the electronics

and cause damage.

– eraser sponges,

– metal scrapers.

Wipe any spills from descaling

immediately!

The external surfaces of the coffee

machine are susceptible to scratching.

Scratches on the glass surface could

also weaken the glass making it more

susceptible to breakages.

Glass cleaners may be used to

clean the exterior. However do not

allow them to sit or "puddle", this can

cause damage to the surface.

Remove the cleaner promptly.

Descaling the appliance

The coffee system must be descaled

regularly. The appliance will display a

reminder message to descale and will

eventually lock if not descaled.

Only use the enclosed descaling

tablets for descaling. They are

specially developed for the coffee

system to optimize the descaling.

The descaling tablets can be

purchased from Miele.

The display will show "Please descale

the coffee system. Remaining number

of servings: 50". This message will now

appear after each preparation.

Other agents may damage the

machine and affect the taste of

coffee and hot water.

^ Tap OK to acknowledge this

message.

The machine could also be

damaged.

If the counter has elapsed to 0, the

appliance will be locked, and the

display reads: Please descale.

Use the correct proportion of

descaling agent in solution to

prevent damage to the machine.

^ Tap OK to start the descaling cycle

immediately.

Use the supplied cleaning

containers to protect the appliance

front from the descaling agent.

Clean up any descaling spills

immediately to avoid damage to the

appliance front.

Descaling takes about 20 minutes. If

you want to continue at a later point in

time, turn the unit off. The appliance

can only be used again once descaling

is performed.

Thoroughly clean the water tank and

the drip tray of descaling residues.

The machine will automatically

switch to water container operation

for the descaling program.

Descaling the appliance

Descaling

^ Add 2 descaling tablets to the water

and allow them to dissolve

completely before closing the water

tank and placing it back into the

machine.

Maintenance

^ Tap < or > until "Maintenance m" is

highlighted, confirm with OK.

During the descaling cycle, the

descaling agent-water solution will run

out of the hot water spout and the main

dispenser. This will be followed by a

pause to allow the solution to dissolve

the internal mineral buildup, after which

more descaling solution with be

released from the spouts. This process

will repeat itself until the cycle is

finished.

^ Select "Descale" and confirm with OK

or, when the appliance is switched

off, tap the OK button.

^ Select "Start", tap OK to begin the

descaling process.

The display prompts the user through

the single steps of the descaling

process. Follow the prompts.

^ When the display prompts you to

Add fresh water to tank, rinse the

tank thoroughly with clear water (all

traces of descaling residue must be

removed) and fill it with clean

If the descaling is started while the

machine is still hot, the appliance

will cool down for 10 minutes before

the descaling begins.

drinking water up to the k mark.

During rinsing, water will run out of the

dispensing spouts. Because the inside

of the machine is also rinsed out, you

must empty the drip tray in the final

step.

The descaling process cannot be

canceled once "OK" is selected. The

process now needs to be

completed. This is a safety feature to

ensure the process will be

completed. It is important for best

results and the longevity of the

machine.

^ When the display shows Prog.

finished, tap OK.

The appliance is now fully descaled

and ready for use.

To dissolve the descaling tablets:

^ Remove the water tank and fill it up to

the k mark with lukewarm water.

(Do not under-fill the water tank,

because this will cause the descaling

cycle to end prematurely, before

completion.)

If the appliance was set to the

plumbed water supply before

descaling, once the descaling

process is complete it will return to

that setting.

Frequently asked questions

,^{Repairs to electrical appliances should only be carried out by a suitably}

qualified person in accordance with local and national safety regulations.

Repairs and other work by unqualified persons could be dangerous.

The light does not illuminate when the appliance is turned on.

Possible fault

Solution

Is the lighting turned off?

– See "Settings - Lighting".

If not, the lighting is defective.

Contact Miele.

The display remains dark.

Possible fault

Solution

– The main switch is turned to "0".

– Turn the main switch to "I".

– Plug the machine in.

– The plug is not inserted into the

socket correctly.

– The fuse has blown or is defective.

– If the fuse has blown contact Miele's

Technical Service Department.

The unit suddenly turns off.

Possible fault

Solution

– Is the machine programmed to

switch off after a programmed time?

– The machine goes into standby

mode when not used for a

programmed time. See "Settings -

Timer - Switching off after".

– There could be pebbles within the

coffee beans. The unit shuts off after

20 secs. to avoid damage.

– Contact Miele's Technical Service

Department.

– Is the machine plugged in?

– Plug in the machine.

The light turns off suddenly.

The light turns off automatically when the machine has not been used for

15 minutes. See "Settings - Lighting".

Frequently asked questions

What if the machine does not switch on, even though the "Switch on at"

timer setting is activated?

Possible fault

Solution

The System Lock is activated.

See "Settings - System Lock".

The display messages are difficult to read.

Possible fault

Solution

The contrast or brightness of the

displays are too low / high.

Adjust the display contrast / brightness.

See "Settings - Display".

Little or no coffee or espresso is dispensed from the main dispenser.

Possible fault

Solution

The main dispenser connector cap is

Lubricate the cap with the supplied

not positioned correctly, see "Guide to silicone grease.

the machine - Interior view).

No milk or milk froth comes out of the main dispenser.

Possible fault

Solution

The dispenser is clogged.

See "Cleaning and Care".

The consistency of the milk froth is not unsatisfactory.

Possible fault

Solution

– The air intake tube is clogged.

– Clean the air intake tube, see

"Cleaning and Care". Any blockages

can be removed by kneading or

blowing through the pipe to remove

any potential blockages.

Never use a sharp object to remove

blockages, this could damage the

parts.

– The air intake tube is faulty.

– Remove the air intake tube and

replace it with the supplied spare

part.

Frequently asked questions

The display prompts me to fill or insert the stainless steel milk container

even though the container has already been filled and inserted

Possible fault

Solution

The container needs to be cleaned.

The grinding sounds louder than usual.

Possible fault

See "Cleaning and Care".

Solution

There could be pebbles within the

coffee beans.

– Turn off the unit immediately.

– Contact the Miele's Tech. Service if

the bean container is not empty.

Otherwise fill the container with fresh

beans.

The coffee/espresso flows too fast into the cup.

Possible fault

Solution

The grind control is set too coarse.

Set the grind control slide to a finer

grind.

The coffee/espresso flows too slow into the cup.

Possible fault

Solution

The grind control is set too fine.

Set the grind control slide to a coarser

grind.

Frequently asked questions

The coffee/espresso is not hot enough.

Possible fault

Solution

– Were the supply lines and cup

pre-heated?

– The smaller the cup, the more

important it is to pre-heat.

– The temperature is set too low.

– Check on what temperature range the

coffee type is set.

– Check if the brew unit is clogged.

– Clean the brew unit.

No drink is prepared although the beans were grinded and enough water is

in the container.

Possible fault

Solution

– The grind control is set to the finest – Adjust the grind control slide to a

or the amount of coffee is set to the

maximum.

different position, or the amount of

coffee more or less.

– The process is timed, the process

might need so long, there is no time

for brewing any more.

The door cannot be closed.

Possible fault

Solution

– Check if all containers are properly

inserted.

– The door hinges need to be

adjusted.

See "Installation Instructions".

The steam heating system is turned off but steam can still dispensed.

Steam can be dispensed as long as the steam heating system is heated. Once it

has cooled, steam can only be dispensed once the steam system has heated.

Frequently asked questions

The coffee dispensing is interrupted.

Possible fault

Solution

The water tank is empty.

– If the unit is plumbed, check the

water line and plumbing.

– If the unit is used with the water tank,

refill the water tank with fresh cold

tap water.

– You will be asked whether you would

like the coffee dispensing to continue

after the water tank has been filled. If

you do not confirm with "OK" within 5

minutes the coffee preparation will

be canceled.

Instead of coffee only water is dispensed.

Possible fault

Solution

– The beans may have gotten stuck.

– Pull the bean container out and push

it back in.

– The ground coffee funnel cover was

opened and closed and a

preparation with ground coffee was

selected but no ground coffee was

inserted.

The coffee system switches

automatically back to bean use after

preparation.

The drip tray is empty but a message to empty it is displayed.

Possible fault Solution

– The metal contacts are soiled or wet. – Clean and dry the contacts.

– Check if the drip tray is inserted

correctly.

– Insert the drip tray as described in

"Cleaning and Care - Drip tray".

– Turn the machine off and on again

with the main switch.

– If the message still appears contact

Technical Service.

Frequently asked questions

The machine does not rinse when turned on although the automatic rinse

feature is set to "On".

When the machine is still at a temperature of about 140°F (60°C). The machine

will not rinse when it is too hot.

The water (or milk) dispensing stops when programming the serving size.

Possible fault

Solution

– There was not enough water in the

tank or milk in the milk container. The

dispensed amount will not be saved.

– Fill the water tank or milk container

before programming the serving

size.

– If the maximum amount is

dispensed, the flow stops

automatically. The maximum amount

is saved.

Water is in the waste unit.

Possible fault

Solution

This is not a fault.

This is residual water from the cleaning

process.

"Coffee water" is in the waste unit.

Possible fault

Solution

– If the grind setting is too coarse, this – Adjust the grind setting and/or

can result in too much coffee water

in the waste unit.

amount of coffee.

– The main dispenser cap is not

positioned correctly.

– Lubricate the cap with the supplied

silicone grease.

– If the cap is faulty, replace it with the

spare part supplied.

The descaling process was started accidently.

The descaling process cannot be canceled once it is started. The process

needs now to be completed. This is a safety feature to ensure the process will be

completed. It is important for best results and the longevity of the machine.

See "Descaling".

The machine makes loud noises during descaling

During a descaling cycle, the machine is relatively loud because water is being

forced through the lines at high pressure. This is not a fault.

Frequently asked questions

The preheating time is increased, the water flow amount is not correct and

the unit performs less?

Possible fault

Solution

The machine needs to be descaled.

– See "Descaling the appliance".

If the "Descale" reminder did not

appear retest the water hardness to

ensure that the machine is set

correctly.

No water flows from the main dispenser.

Possible fault

Solution

The filters in the brew unit are clogged. Rub any residue off the filters with a

sponge. See "Cleaning and Care".

The brew unit or waste unit could not be pulled from the machine.

Possible fault

Solution

– The brew unit is not in the correct

position.

– Close the door. The brew unit

automatically gets into the correct

position.

– The door was opened during

grinding or brewing.

No crema has formed or it is "different".

Possible fault

Solution

– Check if the grind setting is too

coarse or too fine.

– Adjust the grind setting.

– Check what temperature range the

coffee type is set. If the temperature

is too high, there are black areas in

the crema.

– Lower the temperature and amount

of ground coffee. See "Settings".

– Some coffee types produce too

much crema when the coffee /

espresso temperature is set to the

maximum and the amount of ground

coffee is too much.

– The coffee is not fresh enough.

– The coffee is unsuitable for use in

this machine.

– The coffee dispensers are set too

high.

Frequently asked questions

The message "Insert water tank until it engages" appears

Possible fault

Solution

No water is dispensed.

– The water tank is not inserted properly.

Take it out and reinsert correctly.

– The water tank was not filled correctly

during the descaling process. Fill the

water tank up to the correct mark.

– If the message still appears contact

Technical Service.

The message "Check water inlet" appears

Possible fault Solution

The plumbed water intake is faulty. – Check for kinks in the water intake hose

and open the water supply all the way.

– Slide the water tank back in to the

appliance.

– If the fault is displayed again, call

Technical Service.

The gasket of the coffee dispenser connector is damaged and leaking.

Possible fault

Solution

– The gasket is worn.

– Change the gasket with a new one

(supplied).

– Check the door. Is the alignment – Adjust the door hinges. See "Installation -

off from damage to the gasket? Adjusting the door hinges".

Too much crema has formed and is above the coffee dispensers.

Possible fault

Solution

Some coffee types produce too

much crema when the coffee /

espresso temperature is set to the

maximum and the amount of

ground coffee is too much.

Lower the temperature and amount of

coffee.

Frequently asked questions

The main dispenser cap is faulty (see, "Guide to the machine - Interior

view").

Possible fault

Solution

Replace the cap with the spare part

supplied.

Lubricate the cap of the main

dispenser with the supplied silicone

grease.

The grind control slide will not move.

Close the unit and prepare a coffee/espresso. The grind grade can now be

reset.

The storage drawer cannot be pushed in properly.

Close the lid of the ground coffee funnel.

The door is hard to open and close.

– Adjust the door with the door hinges. See "Installation - Adjusting the door

hinges".

– Lubricate the cap of the connecting piece with the supplied silicone grease.

You hear water gurgle or rushing.

The water tank has automatically filled.

Frequently asked questions

The message "Check brew unit" appears on the display?

Possible fault

Solution

The brew unit is clogged.

– Follow the display prompts.

– Clean the brew unit (see "Cleaning and

care" - "Brew unit").

– Set the amount of ground coffee and

the grinder setting to the medium

settings, also adjust these settings in

the user profiles. See the respective

chapters in this manual.

The message "Fault - 28" appears on the display?

Possible fault

Solution

If too much ground coffee passes

through the coffee chute the machine

is unable to process it.

– Tap the button next to OK.

The machine is again ready for use.

One of the messages "Fault - 1" to "Fault - 4" or "Fault - 80" to "Fault - 83"

appears in the display.

Possible fault

Solution

Switch off the machine using the

On/Off button and wait about one

hour before switching it on again.

If the fault message appears in the

display again, call Customer Service.

The message "Fault - 74" or "Fault - 77" appears in the display.

Possible fault

Solution

Turn the machine off and then on

again after a short period of time.

If the fault message appears in the

display again call Customer Service.

Frequently asked questions

The message "Fault - 73" appears in the display.

Possible fault

Solution

The brew unit cannot reset to the

correct position.

– Take out and clean the brew unit.

See "Cleaning and Care - Brew unit".

– Push the coffee ejector of the brew

unit into the correct position.

– Set the brew unit aside and insert the

waste unit and the water tank.

– Close the door.

The brew unit motor will

automatically move to the correct

position.

– When the message "Fit the brew unit"

appears, open the door and insert all

parts into the machine.

– Close the door.

If the message still shows contact Miele

Technical Service.

After sales service

In the event of a fault which you cannot MieleCare

easily fix yourself, please contact the

(USA only)

Miele Technical Service Department at

the contact information on the back of

this booklet.

MieleCare, our Extended Service

Contract program, gives you the

assurance of knowing that your

When contacting the Technical Service

Department, please quote the model

and serial number of your appliance

given on the data plate inside the

appliance.

appliance investment is covered by

5 years of worry free ownership.

MieleCare is the only Extended Service

Contract in the industry that guarantees

repairs by a Miele Authorized Service

Provider using genuine Miele parts.

Only genuine Miele parts installed by

factory trained professionals can

guarantee the safety, reliability, and

longevity of your Miele appliance.

Please note that unless expressly

approved in writing by Miele’s Service

department, Extended Service

Contracts offered by other providers for

Miele products will not be recognized

by Miele. Our goal is to prevent

unauthorized (and untrained) service

personnel from working on your Miele

products, possibly doing further

damage to them, you and/or your

home.

To learn more about MieleCare

Extended Service Contracts, please

contact your appliance dealer or visit

us online at:

http://mieleusa.com/mielecare

Installation instructions

Information is subject to change. Please refer to our website to obtain the most

current product specification, technical & warranty information.

Caring for the environment

Disposal of packing material

Disposal of an old appliance

The cardboard box and packing

materials protect the appliance during

shipping. They have been designed to

be biodegradable and recyclable.

Please recycle.

Old appliances may contain materials

that can be recycled. Please contact

your local recycling authority about the

possibility of recycling these materials.

Ensure that the appliance presents no

danger to children while being stored

for disposal. Before discarding an old

appliance, unplug it from the outlet, cut

off its power cord and remove any

doors to prevent hazards.

Ensure that any plastic wrappings,

bags, etc. are disposed of safely and

kept out of the reach of children.

Danger of suffocation!

Plumbing

Connection to the water

The machine must be connected to

the water supply in accordance with

local and national regulations.

The water being used should have

the drinking water standards of the

respective country where the

machine is used.

supply

^ Disconnect the machine from the

electrical supply.

^ Remove the water connection cover

at the lower rear side of the coffee

machine.

– All units and systems used to deliver

the water to the coffee system must

conform with the requirements of the

respective country.

– Only connect the machine to the

cold water supply.

– The machine can be connected

without a non-return valve.

^ Screw the supplied brass

– The on-site water line must have a

water valve to turn the water off if

needed. If not present, have a water

valve installed by a licensed

plumber.

compression fitting, with the ¾" end,

tightly onto the water connector of the

coffee machine. (Tighten the

compression fitting by hand, do not

use a tool.) The fitting includes an

opening for standard ¼" piping.

– The water faucet must be accessible

after installation.

^ Connect the compression fitting to

the water supply.

– Water pressure on-site:

Minimum: 14.5 psi

^ Check for leaks.

Maximum: 145 psi, if higher, install a

pressure reduction valve.

– Suitable 1/4" tubing or copper piping

must be supplied for plumbing.

– To ensure the best coffee quality, the

maximum length of the tubing or

copper pipe should not exceed

4 ft. 11" (1.5 m). If too much water

remains in the tubing the coffee

quality could be affected.

Electrical connection

WARNING:

Make sure that the power to the

machine is OFF before installing or

performing maintenance or repairs.

THIS APPLIANCE MUST BE

GROUNDED

Important

All electrical work should be

performed by a qualified electrician

in strict accordance with national

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous.

The coffee system comes equipped

with a 6 ft (1.8 m) power cord with a

NEMA 5-15P molded plug for

connection to a 120 V, 15 A, 60 Hz

power supply.

Verify that the voltage, load and circuit

rating information found on the data

plate match the household electrical

supply before installing the coffee

system.

Do not connect the appliance to a

power inverter or directly to power

produced outside of the normal

electrical grid (i.e. direct solar or wind

power source).

Direct connection to such power

sources can cause power surges and

tripped breakers when the appliance is

turned on, and could damage the

appliance.

Do not connect the appliance to energy

saving plugs or outlets. The reduction

of power to the appliance caused by

these devices will cause the appliance

to run hot and may damage it and/or

shorten its usable life.

If there is any question concerning the

electrical connection of this appliance

to your power supply, please consult a

licensed electrician or contact Miele’s

Technical Service Department. See

back page for contact information.

Installation

Installation options

The coffee system is designed to be built into cabinetry.

Miele appliances can be installed flush or proud. Discuss your installation

requirements with your architect, designer and installer.

A combination with other Miele built in appliances is possible. If the machine is

installed in combination with other appliances, it should be installed with a

protective base between the appliance and the unit (exception: installation with a

built-in plate warmer).

A special display cabinet is also available from your dealer or Miele, as an

installation option.

Installation

Make sure power is not supplied to

the appliance while installation or

maintenance work is performed.

Disconnect the power supply to the

work area by unplugging the unit,

tripping the circuit breaker or

removing the fuse. The coffee

system must be installed into

cabinetry before being used.

This unit should only be used in

room temperatures ranging between

59 °F and 140 °F. Do not use the

appliance outside of this range of

temperatures

^ Unscrew the height adjustable feet

on the underside of the machine

about 1/16" (2 mm).

^ Push the appliance all the way back

into the cabinet and center it. If

necessary level the unit with the four

height adjustable feet.

To align the appliance door flush with

the kitchen cabinetry, there must be a

sealing strip around the installation

recess; otherwise, a sealing strip must

be put in place around the appliance.

The feet can be turned out up to 3/8"

(10 mm).

^ Plug the appliance into the electrical

outlet.

^ If there is no sealing strip around the

installation recess, stick the Miele

sealing strip onto the appliance from

the back before putting it into the

recess. Sealing strips are available

from Miele.

Installation

Adjusting the door hinges

The door hinges can be adjusted if the

door cannot be opened easily.

^ Push the appliance into the niche.

^ Open the door and partially tighten

^ To adjust the door sideways, a, turn

screw a.

the screws.

^ Carefully turn the lower screws, a, to

center the machine.

^ To adjust the door to the front or

back, b, turn screw b.

^ To secure the appliance in the

cabinet, tighten the upper screws, b,

by hand. Do not use an electric

screwdriver.

Alteration rights reserved / 0711

M.-Nr. 07 818 660 / 01

INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST

CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.

Nokia 3587i User Manual
MTD 240 650 000 User Manual
LG Electronics Apex User Manual
Kenwood KDC 119S User Manual
Kenwood CD Player User Manual
JOBO Digital Storage Device User Manual
Hitachi Deskstar HDS721025DLE630 User Manual
Fujitsu ETERNUS DX80 User Manual
Barracuda Networks Computer Drive User Manual
ALCATEL Mobile Phones 585D User Manual