AM/FM STEREO RADIO
PROGRAMMABLE CD PLAYER
MODEL CD-625
OPERATING INSTRUCTIONS
BUILT-IN AM/FM RADIO RECEIVER
•
PLAYS MUSIC COMPACT DISCS
•
6 DIGIT LCD VISUAL DISPLAY
•
TRACK REPEAT & DISC REPEAT
•
BASS BOOST SYSTEM
•
DELUXE STEREO HEADPHONES INCLUDED
•
USES 2 SIZE “AA” BATTERIES (NOT INCLUDED)
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD625(CDR92C-0L8)-WM-E-121803
POWER SOURCES
Power this player by connecting an optional (not included) AC ADAPTOR or by inserting
2 size “AA” fresh alkaline batteries.
NOTE: Before you buy an AC Adaptor, please note the only AC ADAPTOR suitable for
this player is DC 4.5V 600mA, with polarity
, others may damage the
player. Please check voltage & current (mA) before buying an AC ADAPTOR.
Using with Batteries
Insert two size “AA” alkaline batteries
according to the + and - markings on
the bottom of the set.
TIPS ON BATTERY USE
Reversing polarities will damage the batteries and possibly this set. Be sure to
follow polarity ( + and - ) as indicated.
•
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.),
or old batteries with new ones.
•
When not in use for an extended period of time, or while internal batteries will not
be used, remove them to prevent possible acid leakage or corrosion resulting in
damage to this player.
•
When the batteries have become discharged, they must be disposed of in a safe
manner that complies with all applicable laws.
•
Installation of batteries should only be done by an adult (for safety).
•
ALKALINE BATTERY LIFE
Bear in mind that battery life expectancy is based upon volume and bass listening
levels.
Maximum battery power consumption happens at maximum settings. Typical life
for 2 size “AA” fresh alkaline batteries is above 8 hours of continuous use for CD
play and 5 hours longer for radio use.
WHEN
SHOWS OR FLASHES IN THE DISPLAY
While CD playing, if the alkaline batteries are weak and discharged, this symbol
” shows or flashes in the display, then the power automatically turns off. If this
“
occurs, replace the alkaline batteries (also if the display does not show anything,
the batteries are dead).
NOTE 1: The display is blank when you listen to the radio, so when the display
does not show anything, please check if the CD/OFF/RADIO FUNCTION
switch is moved to the CD position.
NOTE 2: The radio may work normally for about 5 hours when “
” shows or
flashes in the display indicating batteries are weak for CD play, but still
OK for the radio.
NOTE 3: You may use rechargeable batteries on this set. However, because
rechargeable batteries generally have lower voltage (1.2 volts instead of
1.5 volts). Your playing time will be much less than normal fresh alkaline
batteries.
2
IB-CD625(CDR92C-0L8)-WM-E-121803
DISC PLAYING
1 Slide the CD/OFF/RADIO
FUNCTION switch to CD
position.
CD/OFF/RADIO
FUNCTION
SWITCH
2 Load the disc.
Push
here
Disc
SLIDE TO OPEN
LABEL SIDE UP
3 Connect the headphones.
STEREO
HEADPHONES
TO PHONES JACK
4 Press the PLAY/PAUSE button (
indicator will light up.
), the POWER ON
PLAY/PAUSE
BUTTON
POWER ON
INDICATOR
TRACK NUMBER
CURRENTLY
PLAYING
ELAPSED PLAYING
TIME OF THE
CURRENT TRACK
5 Adjust the volume.
VOLUME
MAXIMUM
MINIMUM
VOLUME CONTROL
3
IB-CD625(CDR92C-0L8)-WM-E-121803
OTHER OPERATIONS
Operation
Display window shows
Press
To pause play
PLAY/PAUSE button
TRACK NUMBER
CURRENTLY
PLAYING
ELAPSED TIME
FLASHES
To release pause and
resume play
PLAY/PAUSE button
STOP button
TRACK NUMBER
CURRENTLY
PLAYING
PLAYING TIME
ADVANCES
To stop play
TOTAL TRACKS
TOTAL PLAYING
TIME
Slide the CD/OFF/RADIO FUNCTION switch to
OFF position, or press the STOP button quickly
twice.
To turn off the power
To skip to the next
track(s)
once (or repeatedly)
To skip to the previous
track(s)
once (or repeatedly)
Keep
depressed and release it when the
desired music section of the disc is found.
If you press and hold the SKIP button (
)
•
To go ahead at high
speed (search forward)
while the last track is playing, and the end of the
track is reached, the music stops and the display
will show the total tracks and total playing time of
the CD, then power will shut itself off after 30
seconds.
To go back at high
speed (search back-
ward)
Keep
depressed and release it when the
desired music section of the disc is found.
Get into Stop Mode
Press the PLAY/PAUSE button
, the set
begins to play, then press the STOP button
,
the display will show six digits similar to the
example on the right.
TOTAL TRACKS
TOTAL PLAYING
TIME
Auto power off function
The power turns off automatically 30 seconds after all tracks on the disc have been
played or after the STOP button is pressed to stop play.
To shut off the power immediately, press the STOP button twice or slide the CD/OFF/
RADIO FUNCTION switch to OFF position.
4
IB-CD625(CDR92C-0L8)-WM-E-121803
REPEAT, INTRO AND RANDOM PLAY
You may have repeat, intro or random play using the REPEAT button. Press the REPEAT
button several times, and the display will show the followings in turn:
REPEAT ONE
REPEAT ALL
INTRO
RANDOM
NORMAL PLAY
SINGLE TRACK REPEAT
Plays one song over and over till you press STOP.
/
SKIP SEARCH
/
SKIP SEARCH
During play, select the song you want to repeat with
either of the SKIP/SEARCH buttons (
or
),
then press the REPEAT button once, the symbol
REPEAT ONE appears in the display.
The song currently playing will repeat over and over,
until you press STOP.
REPEAT ONE
ALL TRACKS REPEAT (DISC REPEAT)
Repeats all songs in order till you press STOP.
During play, press the REPEAT button twice, the
symbol REPEAT ALL will show in the display.
All songs will keep playing in sequence 1, 2, 3, etc.
and when finished, will start all over again until you
press the STOP.
REPEAT
ALL
INTRO PLAY
This plays the first 10 seconds of songs in sequential
order.
1. During play, press the REPEAT button three times,
the word INTRO will flash in the display.
2. Press the PLAY/PAUSE button, the word INTRO
will stop flashing and the first 10 seconds of each
song on the CD will play in sequential order.
3. When you find a song you like, press the PLAY/
PAUSE button, normal play will be resumed, that
song (and the following songs) will play normally.
INTRO
RANDOM PLAY
This plays the songs on the disc in a random order.
1. During play, press the REPEAT button four times,
the word RANDOM will flash.
2. Press the PLAY/PAUSE button, this will play all of
the songs in random order selected by the CD
player. The RANDOM will stop flashing.
RANDOM
3. Press the SKIP/SEARCH button
to skip to the
next random song.
5
IB-CD625(CDR92C-0L8)-WM-E-121803
PROGRAMMED PLAY
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example
Program Number
etc.
etc.
1
3
4
1
7
1
2
5
3
8
6
4
5
2
8
1
Track Number (song number)
During programming, the word PROGRAM flashes in the display. To program
songs to play in your preferred order, follow steps below:
1. Press the PROGRAM button once.
3. Press the PROGRAM button to confirm.
The track 3 is now programmed.
X 1
X 1
PROGRAM
PROGRAM
Program #2 will now show in the
display, ready for your next selection of
The word “PROGRAM” and “
in the display.
” will flash
track.
PROGRAM
PROGRAM
4. Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5. After programming is finished, press
PLAY/PAUSE to begin programmed play.
The word PROGRAM show in the display
or
and music begins.
Program number
2.Press the SKIP/SEARCH button (
) to select track number 3 (example).
the “PROGRAM” and “ ” will flash in the
display.
PROGRAM
NOTE:
/
SKIP SEARCH
/
SKIP SEARCH
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button once. Then you may press
PLAY button to re-start normal play.
PROGRAM
Your programmed memory will be lost:
When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
•
Track number
When the power is off, or the CD DOOR
is opened.
•
6
IB-CD625(CDR92C-0L8)-WM-E-121803
RADIO OPERATION
1 Slide
the
CD/OFF/RADIO
FUNCTION switch to RADIO
position, the POWER ON
indicator will be turned on.
CD/OFF/
RADIO
FUNCTION
SWITCH
POWER ON
INDICATOR
2 Select AM, FM or FM STEREO
with the AM/FM/FM STEREO AM/FM/FM STEREO
BAND switch.
BAND SWITCH
3 Rotate the TUNING CONTROL
to select your favorite radio
station.
AM/FM
DIAL LENS
NOTE: If you tune into an FM
stereo station, the
FM STEREO indicator
will be turned on.
FM STEREO
INDICATOR
TUNING
CONTROL
4 Adjust the volume.
VOLUME
VOLUME
CONTROL
MAXIMUM
MINIMUM
5 If you prefer more bass, slide
the BASS BOOST switch to
ON position.
NOTE:The BASS BOOST
switch is on the
bottom of the set.
6 To turn off the radio, slide the
CD/OFF/RADIO FUNCTION switch
to the OFF or CD position.
7
IB-CD625(CDR92C-0L8)-WM-E-121803
MAINTENANCE
Handling Compact Discs
Cleaning the lens
Dirty, scratched or warped discs may
•
A dirty lens will cause sound skipping. If
the lens is very dirty, the player may not
work. We suggest using a special cleaning
disk (not included) available in most music
and Hi-Fi stores. However, if you do not
have one, you may use the instructions
below.
cause skipping or noise.
Handle the disc only by the edges. To
keep clean, do not touch its surface.
•
Discs should be stored in their cases
after use to avoid scratches.
•
Do not expose discs to direct sunlight,
•
Use a cotton swab very slightly dampened
with alcohol to clean the lens.
high humidity, high temperatures, or
dust, etc. Prolonged exposure to
extreme temperatures can warp the disc
(such as leaving the discs in your car
during summertime).
Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is
very dirty, dampen (not dripping wet) the
cloth with a weak solution of soapy water,
and then wipe clean.
Do not stick or write anything on either
•
side of disc. Sharp writing instruments,
or the inks used in some felt-tipped pens,
may damage its surface.
Cleaning the Discs
To remove the Disc
Fingerprints should be carefully wiped
•
Open the CD DOOR by sliding the CD
DOOR OPEN button, hold the disc by the
edge while slightly pressing on the center
spindle as illustrated, then lift it from the
edge to release and remove.
from the surface of disc with a soft cloth.
Unlike conventional records, compact
discs have no grooves to collect dust
and microscopic dirt, so gently wiping
them with a soft cloth should remove
most particles. Wipe in a straight
motion from the center to the edge.
NOTE:
Always press STOP button and wait for
the disc to stop rotating before sliding the
CD DOOR OPEN button to remove the
disc.
Never use thinner, benzine, record
•
cleaner or antistatic spray on a compact
disc. Such chemicals can damage its
plastic surface.
8
IB-CD625(CDR92C-0L8)-WM-E-121803
SAFETY PRECAUTIONS
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer
servicing to qualified service personnel only.
Do not insert pins or coins, clips, or any objects inside the set.
This set is equipped with a safety device which automatically turns the laser beam off
when the disc door is opened.
Do not drop the set or subject it to strong shocks. Doing so could result in damage.
Do not place the set in locations where the temperature is high, or in humid or dusty
locations, or locations with long heavy vibrations, or tilted surfaces.
The set’s cabinet may warp or the set may otherwise be damaged if it is placed in direct
sunlight, near heaters (where the temperature is 1400F/600C or higher) or in cars with
the windows closed. In the summer, the temperature may get as high as 2120F/1000C
or more.
Use the set within a temperature range of 410F/50C to 950F/350C.
Use ONLY the DC 4.5V 600mA AC Adaptor with polarity
, others may damage
this set. Disconnect the Adaptor from the wall outlet when the set is not to be used for
an extended period of time (3 days or more).
When cleaning this set, use a soft dry cloth. Do not use solvents or commercially
available cleaners, as they may damage or discolor the finish.
Do not wear headphones while operating a motor vehicle. This could create a traffic
hazard and is illegal in many areas. Do not use this set when bicycling or running.
The headphones supplied with this set provide superb stereo listening while allowing
you to hear some outside sounds when listening at normally low volume levels. Listening
at extremely high volume levels minimizes the intrusion of outside noise/sounds. In the
interest of safety, it is strongly advised against the use while engaging in activities
where the exclusion of external sounds (whistles, horns, sirens, traffic, etc.) could be
hazardous. Also loud volume can hurt your ears. If you notice that the sound has
become weak or distorted or if tracks do not change, this is an indication that the
batteries are low. Replace both batteries at the same time (see BATTERY OPERATION).
This CD-625 is identified by a serial number located in the BATTERY COMPARTMENT.
Record this number in the space provided below.
Model CD-625 Serial No.
Date Purchased:
This Instruction Manual contains detailed information on its safety and use. Please
read it carefully so that you may take full advantage of its many features, and ensure
a safe reliable operation. Keep this Instruction Manual for future reference.
CONDENSATION
If cold water is poured into a glass, water droplets form on the outside of the glass.
This is called condensation. Condensation may occur on internal operating parts of the
lens.
Condensation occurs:
When the set is brought from the cold outdoors into a warm room, or if it is in a cold
room to a room which is heated, or in the summer, if the set is moved from an air-
conditioned room or car to a hot or humid location.
Should condensation occur, the set may not operate properly. Open the CD DOOR
and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding
temperature) before using the set.
9
IB-CD625(CDR92C-0L8)-WM-E-121803
IMPORTANT INFORMATION REQUIRED BY THE FCC
Since the CD circuitry may cause interference to other radios nearby, switch this
set off when not in use or move it away from the affected radios.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
•
•
•
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
SAFETY CERTIFICATION
This AM/FM Compact Disc Player is made and tested to meet safety standards of the
FCC requirements and compliance with safety performance of the U.S. Department of
Health and Human Services, and also with FDA Radiation Performance Standards 21
CFR Subchapter J.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•
LASER SAFETY
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM,
DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE.
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN
EYES. THIS IS A CLASS-1 LASER PRODUCT. USE OF ADJUSTMENTS OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM
EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER
MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD
PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS
COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.
10
IB-CD625(CDR92C-0L8)-WM-E-121803
TROUBLE SHOOTING GUIDE
Symptoms
Causes
Solutions
Replace both batteries with fresh
alkaline batteries. Battery life with
fresh batteries is above 8 hours for
continuous CD play and 5 hours longer
for radio use (rechargeable batteries
have 1/2 of that life).
Tracks do not
change or set
does not play
normally.
Batteries are weak (they
may test OK on tester but
they are weak for CD
operation).
Replace both batteries with fresh
ones.
Dead or weak batteries.
CD Player will not
turn on.
Check the optional AC ADAPTOR
connection at AC outlet and the rear
of the set.
The optional AC ADAPTOR
not connected properly.
Re-insert disc with label side facing
up.
Disc inserted incorrectly.
Defective compact disc.
CD DOOR not closed.
Try another compact disc.
Close the door securely.
Disc will not play.
Take out the CD disc and leave the
CD Door open for about 20 minutes
to dry the moisture condensation.
Moisture has formed inside
the CD deck.
VOLUME control set to
minimum.
Increase the volume.
No sound from
headphones.
Replace with fresh batteries or use
the optional AC ADAPTOR.
Weak batteries.
Defective compact disc.
Try another compact disc.
Sound is skipping
or sound stops.
The compact disc or lens
is dirty or CD is scratched.
Clean or replace the compact disc
or clean the lens.
Music is too loud.
Lower the VOLUME control.
Slide BASS BOOST switch to OFF.
BASS BOOST is ON.
Replace both batteries or use the
optional AC ADAPTOR.
Sound is distorted.
Weak batteries.
Remove batteries and the optional
AC ADAPTOR. Wait 15 seconds
and re-insert. Make sure batteries
are fresh or the optional ADAPTOR
has power.
Electronic or static error
caused circuitry to lock.
Buttons do not
work.
FUNCTION switch is in the
CD or OFF position.
Radio does not
work.
Slide the FUNCTION switch to the
RADIO position.
The FM Antenna is built-into Straighten the headphone wire, or bring
FM reception is
weak.
the headphone wire.
the set closer to a window.
The built-in AM Antenna is Rotate the set or bring the set near a
AM reception is
weak.
directional.
window.
11
IB-CD625(CDR92C-0L8)-WM-E-121803
TECHNICAL SPECIFICATIONS
CD Player Section
Frequency response ..............................
Sampling frequency ................................
D/A converter .........................................
Error correction method ..........................
Pickup ...................................................
50Hz - 15kHz +1/-2dB
44.1kHz
1-bit
CIRC
Optical 3-beam semiconductor laser
(780 nm wavelength)
Laser diode material GaAIAs
Laser output less than 44.6µW
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CDRW encoded discs.
Radio Section
Frequency Range .................................
AM: 530 - 1700 kHz
FM: 88 - 108 MHz
General
Maximum output (stereo headphones) .....
Power Supply
20mW + 20mW
AC Adaptor Input....................................
DC .........................................................
120V/60Hz - 4.5V DC Output (not included)
3V: Using 2 size “AA” alkaline batteries
Set Dimensions (approximate)
Width ................................................
Depth ...............................................
Height ..............................................
Weight (approximate) .............................
5 1/2"
6"
1"
9.5oz. (270g) (set only)
12
IB-CD625(CDR92C-0L8)-WM-E-121803
LIMITED WARRANTY
We warrant this product to be free from defects in material and workmanship under
normal use for a period of 90 days after purchase and we will repair it free of charge or
replace it at no charge, should it become defective under this warranty, providing you
submit proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will service or exchange, at no
charge, the set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day
period expires, and for a period of 12 months from original purchase, we will repair the unit
covering any part(s) that need to be replaced at no charge, but will charge for the cost of
labor, return postage paid by Lenoxx.
This warranty does not apply to any products which have been subject to misuse,
neglect or accident. This warranty does not cover broken headphones or cabinet.
UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitations
or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state. The following charges apply to repairs beyond the
warranty period: $15.00. Be sure to pack carefully and return postage paid insured
together with your money order (personal checks will not be accepted) and sales receipt to:
LENOXX ELECTRONICS CORP. 2 GERMAK DRIVE, CARTERET N.J. 07008
For customer service
Dial 1-800-315-5885
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Visit Our Website: http://www.lenoxx.com
© 2004 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
13
IB-CD625(CDR92C-0L8)-WM-E-121803
|