b y
T S A
V A Í C R E J A S N E M A R A P O N F O L É E T
G u í a d e l U s u a r i o
User Guide
V CAST MESSAG ING PHONE
by
Important Safety Precautions
Read these simple guidelines. Breaking the rules may be dangerous
or illegal. Further detailed information is given in this user guide.
Violation of the instructions may cause serious injury or death.
G
Never use an unapproved battery since this could
damage the phone and/or the battery and could
cause the battery to explode.
G
Never place your phone in a microwave oven as it will
cause the battery to explode.
G
Never store your phone in temperatures lower than
-4°F or higher than 122°F.
G
Do not dispose of your battery near fire or with
hazardous or flammable materials.
G
When riding in a car, do not leave your phone or set
up the hands-free kit near the air bag. If wireless
equipment is improperly installed and the air bag is
deployed, you may be seriously injured.
G
Do not use a hand-held phone while driving.
G
Do not use the phone in areas where its use is
prohibited. (For example: aircraft)
1
Important Safety Precautions
G
G
Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as
a bathroom.
Do not use harsh chemicals (such as alcohol,
benzene, thinner, etc.) or detergent to clean your
phone. This could cause a fire.
G
G
G
Do not drop, strike, or shake your phone severely. It
may harm the internal circuit boards of the phone.
Do not use your phone in highly explosive areas as
the phone may generate sparks.
Do not damage the power cord by bending, twisting,
pulling, or heating. Do not use the plug if it is loose as
it may cause electric shock or fire.
G
G
G
Do not place any heavy items on the power cord. Do
not allow the power cord to be crimped as it may
cause electric shock or fire.
Do not handle the phone with wet hands while it is
being charged. It may cause an electric shock or
seriously damage your phone.
Do not disassemble the phone.
2
G
Do not place or answer calls while charging the
phone as it may short-circuit the phone and/or cause
electric shock or fire.
G
G
Do not hold or let the antenna come in contact with
your body during a call.
Make sure that no sharp-edged items, such as
animal’s teeth or nails, come into contact with the
battery. This could cause a fire.
G
G
Store the battery out of reach of children.
Be careful that children do not swallow any parts
(such as earphone, connection parts of the phone,
etc). This could cause asphyxiation or suffocation
resulting in serious injury or death.
G
G
Unplug the power cord and charger during lightning
storms to avoid electric shock or fire.
Only use the batteries and chargers provided by LG.
The warranty will not be applied to products provided
by other suppliers.
G
G
Only authorized personnel should service the phone
and its accessories. Faulty installation or service may
result in accidents and consequently invalidate the
warranty.
Your service provider programs one or more
emergency phone numbers, such as 911, that you can
call under any circumstance, even when your phone
is locked. Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be placed due
to network, environmental, or interference issues.
3
Table of Contents
®
From the Internal Qwerty
4
5
Table of Contents
6
7
Welcome
2
G
\Thank you for choosing the enV
Any key answer, auto answer
with hands-free accessories,
auto retry, one-touch and speed
dialing with 999 memory
locations.
cellular phone designed to operate
with the latest digital mobile
communication technology, Code
Division Multiple Access (CDMA).
Along with the many advanced
features of the CDMA system, such
as greatly enhanced voice clarity,
this compact phone offers:
G
G
Bilingual (English and Spanish)
capability.
®
Bluetooth wireless technology.
®
SM
NOTE The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by LG
Electronics is under license. Other
trademarks and trade names are
those of their respective owners.
G
V CAST Music and Video
capability.
G
Mobile IM.
G
VZ Navigator.
G
Mobile Email.
TIP
G
52-key internal keypad.
View the interactive user guide on the web for
your convenience. You can freely surf and
interactively learn how to use your phone
step-by-step.
Go to http//:www.verizonwireless.com ¡
Support ¡ Phones & Devices ¡ Choose
Equipment Guide ¡ Select your phone model.
G
19-key external keypad and
screen with auto screen lock.
G
Customizable display themes and
screensavers.
G
Built-in 2.0 Megapixel digital
camera.
G
Large, easy-to-read, 8-line
backlit LCD with status icons.
G
Paging, messaging, voicemail,
and caller ID.
G
Mobile Web 2.0.
G
Media Center.
G
Long battery standby and talk
2
time.
*enV ™ is a trademark of Verizon
Wireless.
8
Technical Details
reduce call interruptions.
Important Information
The Cellular and PCS CDMA
networks consist of MSO (Mobile
Switching Office), BSC (Base
Station Controller), BTS (Base
Station Transmission System), and
MS (Mobile Station).
This user’s guide provides important
information on the use and
operation of your phone. Please
read this guide carefully prior to
using the phone to be able to use
your phone to its greatest
1xRTT system receives twice as
many subscribers in the wireless
section as IS-95. Its battery life is
twice as long as IS-95. High-speed
data transmission is also possible.
EV-DO system is optimized for data
service and is much faster than
1xRTT system in applicable area.
advantage and to prevent any
accidental damage or misuse. Any
unapproved changes or
modifications will void your
warranty.
Technical Details
2
The enV is an all digital phone that
operates on both Code Division
Multiple Access (CDMA)
frequencies: cellular services at 800
MHz and Personal Communication
Services (PCS) at 1.9 GHz.
The following table lists some major
CDMA standards.
CDMA technology uses a feature
called DSSS (Direct Sequence
Spread Spectrum) that enables the
phone to keep communication from
being crossed and to use one
frequency channel by multiple
users in the same specific area.
This results in a 10-fold capacity
increase when compared with
analog mode. In addition, features
such as soft/softer handoff, hard
handoff, and dynamic RF power
control technologies combine to
9
Technical Details
CDMA
Standard
Designator
Description
CDMA Dual-Mode Air Interface
TIA/EIA-95A
TSB-74
14.4kbps Radio Link Protocol and
Inter-Band Operations
Basic Air
Interface
ANSI J-STD-008
TIA/EIA-IS2000
IS-95 Adapted for PCS Frequency Band
CDMA2000 1xRTT Air Interface
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-124
MAS-BS
PCSC-RS
Network
Service
Intersystem Operations
Non-Signaling Data Communications.
Speech CODEC
TIA/EIA/IS-96-B
Short Message Service
TIA/EIA/IS-637
TIA/EIA/IS-657
Packet Data
IS-801
Position Determination Service (gpsOne)
High Speed Packet Data
TIA/EIA/IS-707-A
CDMA2000 High Rate Packet Data Air Interface
TIA/EIA/IS-856
TIA/EIA/IS-878
TIA/EIA/IS-866
TIA/EIA/IS-890
1x EV-DO Inter-Operability Specification for HRPD
Access Network Interfaces
1x EV-DO
Related
Recommended Minimum Performance Standards for
HRPD High Rate Packet Data Access Terminal
Interface
Test Application Specification (TAS) for High Rate
Packet Data Air Interface
FCC RF Exposure Information
Frequency (RF) electromagnetic
energy emitted by FCC regulated
transmitters. Those guidelines are
consistent with the safety standard
previously set by both U.S. and
WARNING! Read this information
before operating the phone.
In August 1996, the Federal
Communications Commission (FCC)
of the United States, with its action
in Report and Order FCC 96-326,
adopted an updated safety standard
for human exposure to Radio
international standards bodies. The
design of this phone complies with
the FCC guidelines and these
international standards.
10
Bodily Contact During Operation
FCC Notice and Cautions
This device was tested for typical
use with the back of the phone kept
0.79 inches (2.0 cm) from the body.
To comply with FCC RF exposure
requirements, a minimum
This device and its accessories comply
with part 15 of FCC rules. Operation is
subject to the following two conditions:
(1) This device and its accessories may
not cause harmful interference, and (2)
this device and its accessories must
accept any interference received,
including interference that causes
undesired operation.
Any changes or modifications not
expressly approved in this user guide
could void your warranty for this
equipment. Use only the supplied
antenna. Use of unauthorized antennas
(or modifications to the antenna) could
impair call quality, damage the phone,
void your warranty and/or violate FCC
regulations.
separation distance of 0.79 inches
(2.0 cm) must be maintained
between the user’s body and the
back of the phone, including the
antenna, whether extended or
retracted. Third-party belt-clips,
holsters, and similar accessories
containing metallic components
should not be used. Avoid the use
of accessories that cannot maintain
0.79 inches (2.0 cm) distance
between the user’s body and the
back of the phone and have not
been tested for compliance with
FCC RF exposure limits.
Don't use the phone with a damaged
antenna. A damaged antenna could
cause a minor skin burn. Contact your
local dealer for a replacement antenna.
Vehicle-Mounted External Antenna
(Optional, if available.)
To satisfy FCC RF exposure
requirements, keep 8 inches (20 cm)
between the user / bystander and
vehicle-mounted external antenna.
For more information about RF
exposure, visit the FCC website at
www.fcc.gov.
11
Phone Overview
15. Camera Lens
1. Earpiece
14. External LCD
Screen
2. MUSIC Key
13. Headset Jack
3. Camera Key
12. CLR Key/ Voice
Commands Key
11. PWR/END Key
10. OK Key
4. Side Volume
Keys
9. microSD™ Slot
5. SEND Key
8. Vibrate Mode Key
6. Accessory
Charger Port
7. Alphanumeric keypad
1. Earpiece Lets you hear the caller.
12. CLR Key / Voice Commands Key Deletes
single spaces or characters with a quick
touch, but press and hold to delete entire
words. Also backs out of menus, one level at
a time. In standby mode*, simply press the
key to start Voice Commands or press and
hold to start recording a new sound.
2. MUSIC Key Use for instant access to your
music.
3. Camera Key Use for quick access to Camera
function. Press and hold the camera key to
record Video.
4. Side Volume Keys Use to adjust the Master
Volume in standby mode* and the Earpiece
Volume during a call.
13. Headset Jack Allows you to plug in an
optional headset for convenient, hands-free
conversations. Plug headset into the 2.5mm jack
located at the top right corner of the device.
5. SEND Key Use to make and answer calls.
6. Accessory Charger Port Connects the phone to
the battery charger, or other compatible
accessory.
14. External LCD Screen Allows you to show
incoming calls, messages and icons
indicators as well as a wide variety of content
you select for viewing.
15. Camera Lens Used for taking pictures and
recording video. Keep is clean for optimal
photo quality.
7. Alphanumeric keypad Use to enter numbers
and characters and select menu items
8. Vibrate Mode Key From standby mode*, press
and hold for about 3 seconds to activate
Vibrate Mode.
* Standby mode is when the phone is waiting for input from you.
No menu is displayed and the phone isn’t performing any
action. It’s the starting point for all of the instruction steps.
9. microSD™ Slot Accommodates optional
microSD™ card up to 8GB.
10. OK Key Use to unlock the screen, access the
Menu, and accept entered or highlighted
information.
11. PWR/END Key Use to turn the power on/off
and to end a call. Also returns to standby
mode.*
Note: This User Manual gives navigation instructions according to
the default "Grid" Menu Layout in the Display Settings menu. If
other themes or menus are set, navigating the phone's menus
may be different.
12
17. Speakers
1. Left Soft Key
2. Fn Key
(Shortcut Key in
standby mode)
16. LCD Screen
15. Right Soft Key
14. SEND Key
13. END/PWR Key
12. OK Key
3. Shift Key
4. Sym Key
11. Directional Keys
10. Speakerphone Key
9. CLR Key
5. Game Directional
Keys
7. Space / Voice
Commands Key
8. Return Key
6. Alphanumeric
Keypad
1. Left Soft Key Use to access Message menu or
other function displayed at the bottom left of
the LCD.
10. Speakerphone Key Use to activate
Speakerphone Mode.
11. Directional Keys Use for quick, convenient
navigation. From standby mode, access
Mobile Web, My Account, Calendar, and My
Shortcuts (you can change any of these to
other menus in the Settings menu). In menus
use to scroll to choices and settings.
2. Fn Key (Shortcut Key in standby mode) Use for
quick access to assigned menus. See page 14.
3. Shift Key Use to change letter case when
typing.
4. Sym Key Use to insert symbols (displayed at
the top of designated keys) into your text.
12. OK Key Use to activate a selected screen
item.
5. Game Directional Keys Use for game
navigation.
13. END/PWR Key Use to turn the power on/off
and to end a call. Use to return to standby
mode.
6. Alphanumeric Keypad Use to enter numbers
and characters and select menu items.
14. SEND Key Use to make or answer calls.
7. Space Key Use to enter a space while editing.
TTS (Text to Speech) function is available with
in Messaging Inbox, Notepad and
15. Right Soft Key Use to access the Contact List,
or select the option displayed at the bottom
right of the LCD.
Email screen. Use to activate Voice Commands
in standby mode.
16. LCD Screen Displays incoming calls,
messages and indicator icons as well as a
wide variety of content you select to view.
8. Return Key Moves cursor to the next line.
17. Speakers Lets you hear the caller's voice in
speakerphone mode.
9. CLR Key Press to delete a single space or
character, or press and hold to delete a
specific word plus its space. Press once in a
menu to go back one level.
13
Entering and Editing Information
®
From the Internal Qwerty Keypad
When creating a Text, Picture or Video message using the inside LCD, use the
Qwerty keypad.
Use the arrow keys to go to next field such as
recipient address, text, picture and video
depending on the message types. Use the OK
Key to send a message when finished.
Press this key first and then any
key with a symbol on it to insert
that symbol in your message.
Use to enter numbers.
Use to delete a letter,
Use to enter
letters.
Use to go to next line
editing your message.
Use to insert a space
between a letter,
words and sentences.
words or sentences. Also
use it to exit the menu and
go back to standby mode.
Fn Key Shortcut Menu
The function key Shortcut Menu allows
quick access to ten menus.
1. With the flip open, press the
Key.
2. Press the number keys to go to the
menu, or use Directional Keys to select
the menu you want and press
GO.
To reassign a shortcut, highlight the shortcut you wish to
change, then press the Left Soft Key Reassign.
Select the application you wish to assign to that location
by pressing
.
14
Menu Tree on the Internal Screen
5. In Case of
Emergency
6. My Name Card
My Ringtones
Messaging
VZ Navigator
Media Center
Mobile IM
1. Music & Tones
1. V CAST Music
2. Get New
Ringtones
3. My Ringtones
4. My Music
5. My Sounds
6. Sync Music
2. Picture & Video
1. V CAST Videos
2. Get New
1. New Message
2. Inbox
3. Sent
4. Drafts
Settings & Tools
5. Voicemail
6. Mobile IM
7. Email
1. My Account
2. Tools
1. Voice
8. Chat
Commands
2. Calculator
3. Ez Tip
Calculator
Pictures
Recent Calls
4. Calendar
5. Alarm Clock
1. Alarm 1
3. My Pictures
4. My Videos
5. Take Picture
6. Record Video
7. Online Album
3. Games
1. Missed
2. Received
3. Dialed
4. All
5. View Timers
2. Alarm 2
3. Alarm 3
6. Stopwatch
7. World Clock
8. Notepad
9. USB Mass
Storage
3. Bluetooth Menu
1. Add New
Device
4. Mobile Web
5. Browse &
Download
6. Extras
Contacts
1. New Contact
2. Contact List
3. Groups
4. Sounds Settings
1. Master Volume
2. Call Sounds
1. Call
4. Speed Dials
Email
Ringtone
15
Menu Tree on the Internal Screen
2. Call Vibrate
3. Alert Sounds
1. TXT
5. Display
Themes
6. Main Menu
Settings
6. Voice Privacy
7. DTMF Tones
8. USB Auto
Detection
Message
2. Pic/Video/
Voice
7. Font Size On
Internal
9. Memory
1. Save Options
2. Phone
Message
Display
3. Voicemail
4. Emergency
Tone
4. Keypad
Volume
5. Service Alerts
1. ERI
8. Clock Format
6. Phone Settings
1. Standalone
Mode
2. Set Shortcuts
3. Voice
Memory
3. Card Memory
0. Phone Info
1. My Number
2. SW/HW
Version
Commands
4. Language
5. Location
6. Security
1. Edit Codes
2. Restrictions
3. Phone Lock
4. Lock Phone
Now
3. Icon Glossary
4. Software
Update
2. Minute Beep
3. Call Connect
4. Charge
Complete
NOTE Keyguard Settings
is available on the
6. Power On/Off
1. Power On
2. Power Off
7. Voice Clarity
5. Display Settings
1. Banner
outside display.
5. Reset
Default
1. Personal
Banner
6. Restore
Phone
2. ERI Banner
2. Backlight
1. Display
7. System Select
8. NAM Select
9. Auto NAM
7. Call Settings
1. Answer
2. Keypad
3. Wallpaper
1. Internal
Wallpaper
2. External
Wallpaper
4. Charging
Screen
Options
2. End Call
Options
3. Auto Retry
4. TTY Mode
5. One Touch Dial
16
Getting Started with Your Phone
The Battery
Charging the Battery
To use the charger provided with
your phone:
NOTE It is important to fully charge the
battery before initial use of the phone.
The phone comes with a
NOTICE
rechargeable battery. Keep the
battery charged while not in use in
order to maximize talk and standby
time. The battery charge level is
shown at the top of the LCD screen.
Please use only an approved charging
accessory to charge your LG phone.
Improper handling of the charging port, as well
as the use of an incompatible charger, may
cause damage to your phone and void the
warranty.
1. Plug the end of the AC adapter
into the phone’s charger port and
the other end into an electrical
outlet.
Installing the Battery
To install the battery, insert the top
edge (opposite the battery terminals)
of the battery into the opening on the
back of the phone. Push the battery
down until it clicks into place.
Removing the Battery
Turn power off. Slide the battery
release latch away from the edge of
the battery, then lift the edge of the
battery to remove it.
NOTICE
Please make sure that the LG logo faces
down before inserting a charger or data cable
into the charger port of your phone.
2. The charge time varies
depending upon the battery level.
Charging with USB
You can use your computer to
charge your phone. Connect one
end of a USB cable (sold separately)
to the charging accessory port on
17
Getting Started with Your Phone
your phone and the other end to a highpower USB port on your PC
(commonly located on the front panel of the computer).
NOTE Lower USB port is not supported, such as the USB port on your keyboard or bus-powered
USB hub.
How to Install Your microSD™ Card
1. Locate the microSD™ slot on the right
side of the phone and gently uncover
the slot opening (microSD™ slot cover
stays attached to the phone so you
don't lose it).
2. Insert the microSD™ card in the
correct direction until it clicks into the
slot. If you insert the card in the wrong
direction, it may damage your phone or
your card.
How to Remove Your microSD™ Card
1. Gently press and release the exposed edge of the microSD™ card
to eject it.
2. Remove the microSD™ card from the slot and replace the cover.
NOTE Do not attempt to remove the microSD™ card while reading or writing to the card.
18
Using the External Power Key
Battery Temperature Protection
1. Install a charged battery or
connect the phone to external
power source.
If the battery gets overheated, the
phone will automatically turn off.
When you turn the phone back on, a
message pops up alerting you that
the phone was powered off for your
safety.
2. Press
for a few seconds
until the LCD screen lights up.
Turning the Phone Off
Battery Charge Level
You can find the battery charge level
at the top right of the LCD screen.
When the charge level becomes
low, the battery sensor sounds a
warning tone, blinks the battery icon,
and displays a warning message. As
the charge level approaches empty,
the phone automatically switches off
without saving.
Using the Internal Keypad
1. Press and hold
display turns off.
until the
Using the External Power Key
1. Unlock the Screen by pressing
twice.
2. Press and hold
display turns off.
until the
Turning the Phone On and Off
Turning the Phone On
Using the Internal Keypad
1. Install a charged battery or
connect the phone to external
power source.
2. Open the flip and press
a few seconds until the LCD
screen lights up.
for
19
Getting Started with Your Phone
Signal Strength
Making Calls
Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon: the more bars,
the stronger the signal. If you’re
having problems with signal quality,
move to an open area or, when
inside a building, try moving towards
a nearby window.
NOTE To activate the speakerphone during a
call, simply open the flip.
Using the External Keypad
1. Unlock the screen by pressing
twice.
2. Enter the phone number (include
the area code, if needed).
3. Press the
key.
4. Press the
call.
key to end the
Screen Icons
When the phone is on, the top line
of the LCD screen displays phone
status icons.
Using the Internal Keypad
1. Make sure the phone is turned
on. If not, press and hold the
key for about three
seconds. If necessary, enter the
lock code.
Using the Internal Keypad
To see the icon glossary, go to
MENU SETTINGS & TOOLS
Phone Info Icon Glossary on your
phone.
2. Enter the phone number (include
the area code, if needed).
3. Press the
key.
4. Press the
call.
key to end the
20
G
G
Correcting Dialing Mistakes
Any Key: Press the
any other key except the
key or
If you make a mistake while dialing
key
.
a number, press
once to erase
Auto with Handsfree: The call
automatically connects when
connected to a handsfree device.
the last digit entered, or hold down
for at least 2 seconds to delete
all digits. When using external
NOTE If you press the Left Soft Key
[Quiet] while the phone is ringing, the
ringing or vibration is muted for that call.
keypad, use
.
Redialing Calls
Press and hold the external
key or the internal
redial the last number you dialed,
received or missed in call history.
The last 270 numbers are stored in
the call history list and you can
select any of these to redial.
NOTE If you press the Right Soft Key
[Ignore] while the phone is ringing and
unlocked, the call will end or go to
voicemail.
key to
Receiving Calls
Using the External Keypad
1. When the phone rings or vibrates,
press the
key.
2. Press the
call.
key to end the
Using the Internal Keypad
1. When the phone rings or
vibrates, there are several ways
of answering a call, depending
on the phone setting:
G
Flip Open: Open the flip (default
setting).
21
Quick Access to Convenient Features
Vibrate Mode
Volume Quick Adjustment
Sets the phone to vibrate instead of
ring ( is displayed). To set
Vibrate Mode, press and hold
the internal keypad, or on the
external keypad (after unlocking the
Quickly adjust ringer and earpiece
volumes by pressing the upper side
key to increase and the lower side
key to decrease.
on
NOTE The earpiece volume can only be
adjusted during a call and Keypad
volume can only be adjusted through
the Menu.
phone by pressing
locked).
twice, if
To return to Normal Mode, press and
hold again on the internal
Call Waiting
During a call, one beep indicates that
you have another incoming call.
keypad, or
Key again on the
external keypad.
Ignoring a Call Waiting
If you don't want to answer the
incoming call, press the Right Soft
Mute Function
The Mute Function prevents the
transmission of your voice to the
caller. To quickly activate Mute press
Key
[Ignore] when the flip is
open. The Call Waiting beep stops
and the call goes to your voicemail, if
available.
the Left Soft Key
[Mute] above
the internal keypad then to unmute
press the Left Soft Key
[Unmute] again.
Answering a Call Waiting
1. Press the internal
external key whether the
flip is open or closed to
key / the
NOTE When the phone is closed, press
[OPTIONS], then press
to
[Mute]. To unmute, press
[OPTIONS], then press
[Unmute].
to
automatically put the first call on
hold and answer the new call.
2. Press the internal
key / the
external key again to put
the second call on hold and
return to the first call.
22
Voice Commands
Voice Commands allow you to do
things by verbal command (e.g., make
calls, confirm Voicemail, etc.).
1. Access the Voice Commands
feature:
G
With the flip open, press
.
G
With the flip closed and the
screen unlocked, give the
a quick press (an extended press
activates the Voice Recorder
feature instead).
2. Follow the prompts to use your
voice command(s).
NOTE Voice Commands can also be started
with the designated key on your
®
Bluetooth device. Please check the
®
manual of the Bluetooth device for
further instructions.
23
Contacts in Your Phone’s Memory
Storing Basics
Customizing Individual
Entries
Using the Internal Keypad
Using the Internal Keypad
1. Enter a number (max. 32 digits),
then press the Left Soft Key
1. Press the Right Soft Key
[Contacts], then use the Directional
[Save]
.
Key
to scroll to an entry.
2. Use the Directional Key
scroll to Add New Contact/
Update Existing, then press
to
2. Press the Left Soft Key
[Edit].
.
3. Use the Directional Key
scroll to the information to
customize.
to
3. Use the Directional Key
scroll to Mobile 1/ Home/ Work/
Mobile 2/ Fax, then press
to
.
4. Change the entry as you want, then
press to save your changes.
4. Enter a name (max. 32 characters),
then press to Save.
5. Press to exit,
or the Right Soft Key
[Options] for other options.
to call,
Speed Dial
Allows you to set up your Speed Dials.
Using the Internal Keypad
Using the External Keypad
1. Press the Right Soft Key
[Contacts], then use the Directional
1. Unlock the Screen by pressing
twice.
Key
2. Press the Left Soft Key
[Edit]
3. Use the Directional Key
scroll to a phone number, then press
to scroll to an entry.
2. Enter a number (max. 48 digits),
then press
3. Press
4. Use the Directional Key
scroll to Mobile 1/ Home/ Work
then press
5. Enter a name (max. 32 characters),
then press to Save.
[OPTIONS].
.
to save.
to
to
,
the Right Soft Key
[Options].
.
4. Use the Directional Key
to
scroll to Set Speed Dial, then
press
.
5. Enter a Speed Dial digit.
24
Using the Internal Keypad
G
G
Use the keypad, then press
to set.
1. Enter a number, then press the
Right Soft Key
[Options]
.
Use the Directional Key
to
2. Use the Directional Key
to
scroll to the Speed Dial digit,
scroll to 2-Sec Pause or Wait
,
then press
to set.
then press
.
6. Screen prompt appears Add
Contact to Speed Dial? Press
to select Yes, then press
select Save.
3. Enter additional number(s) (e.g., pin
number, credit card number, etc.).
to
4. Press the Left Soft Key
[Save]
.
Storing a Number with
Pauses
5. Complete the Contact entry as
necessary.
Pauses allow you to enter additional
series of numbers to access
Using the External Keypad
1. Unlock the Screen by pressing
twice.
automated systems such as Voicemail
or credit billing numbers. Pause types
are: Wait (W) The phone stops dialing
until you press the Left Soft Key
[Release] to advance to the next
number. 2-Sec Pause (P) The phone
waits two seconds before sending the
next string of digits.
2. Enter a number, then press
[OPTIONS].
3. Use the Directional Key
scroll to 2-Sec Pause or Wait
then press
to
,
.
4. Enter additional number(s) (e.g., pin
number, credit card number, etc.).
5. Press
[OPTIONS] and select
Save.
6. Complete the Contact entry as
necessary.
25
Contacts in Your Phone’s Memory
Changing Saved Information Using
the Internal Keypad
Adding Additional Phone
Number(s) to Existing
Contact
1. Press the Right Soft Key
[Contacts].
From Standby Mode Using the
Internal Keypad
2. Use the Directional Key
scroll to a Contact entry, then
press the Left Soft Key
to
to
1. Enter a phone number, then press
the Left Soft Key
[Save]
.
[Edit]
.
2. Use the Directional Key
to
3. Use the Directional Key
scroll to the field you want to
change.
scroll to Update Existing, then
press
.
3. Use the Directional Key
scroll to an existing entry, then
press
to
4. Make the changes, then press
to save.
.
4. Use the Directional Key
scroll to Mobile 1/ Home/ Work/
Mobile 2/ Fax, then press
save.
to
Changing the Default
Number
The Default Number is the phone
number you entered when you
to
From the Contact List Screen Using
the Internal Keypad
created the Contact. Another number
can be saved as the Default Number.
Using the Internal Keypad
1. Press the Right Soft Key
[Contacts].
1. Press the Right Soft Key
[Contacts].
2. Use the Directional Key
scroll to an entry, then press the
Left Soft Key [Edit]
to
2. Use the Directional Key
scroll to an entry.
to
to
.
3. Use the Directional Key
scroll to the phone number field to
add, then enter the number and
to
3. Press the Left Soft Key
[Edit]
.
4. Use the Directional Key
press
to save.
highlight a phone number, then
26
press the Right Soft Key
[Options].
Deleting a Contact Entry Using the
Internal Keypad
5. Use the Directional Key
highlight Set As Default, then
to
1. Press the Right Soft Key
[Contacts].
press
.
2. Use the Directional Key
scroll to an entry.
to
6. Press
to set the new number
as the default. A confirmation
message is displayed.
3. Press the Right Soft Key
[Options], then press
Erase.
7. Press
again to save.
4. Press
[Yes].
Deleting
Deleting a Speed Dial
Using the Internal Keypad
Deleting a Phone Number Using
the Internal Keypad
1. Press the Right Soft Key
[Contacts].
1. Press the Right Soft Key
[Contacts].
2. Use the Directional Key
to
highlight a Contact entry to edit
and press [VIEW]
2. Use the Directional Key
scroll to an entry.
to
.
3. Select the phone number with the
3. Press the Left Soft Key
Speed Dial, then press
[EDIT].
[Edit]
.
4. Press the Right Soft Key
[Options].
4. Use the Directional Key
scroll to a phone number.
to
5. Press
6. Press
7. Press
Remove Speed Dial
.
5. Press and hold
6. Press
to delete it.
[Yes]
.
.
to save.
NOTE This will only work when you have
more than one number listed per
contact.
27
Contacts in Your Phone’s Memory
Speed Dials 97, 98, and 99
Speed Dialing
Speed Dials 97, 98, and 99 are
preset to access certain phone
account information: 97 (#BAL), 98
(#MIN), and 99 (#PMT). Unlike
Speed Dial 1, these can be changed
if you want.
Allows you to make phone calls
quickly and easily to numbers stored
in Contacts. You need to set Speed
Dials in your Contacts before using
this feature.
NOTE Speed Dial 1 is for Voicemail.
Single Digit Speed Dials
Press and hold the Speed Dial digit.
Your phone recalls the phone
number from your Contacts,
displays it, and dials it for you.
Multiple Digit Speed Dials
When you press and hold a number
key, it signals the phone to attempt
a Speed Dial transmission. To dial
Speed Dials with multiple digits,
press the first digit(s) as necessary,
then press and hold the last digit.
For example, to Speed Dial 25,
press
.
, then press and hold
NOTE You can also enter the Speed Dial
digit(s), then press the internal
key / external
key.
28
MY RINGTONES
Get New Applications
MY RINGGTONES
Allows you to select a desired
ringtone, or download a new
ringtone.
Allows you to download new
ringtones through applications.
1. Open the flip and press
[MENU].
1. Open the flip and press
[MENU].
2. Press
My Ringtones.
3. Press
Applications to connect and
download ringtone.
Get New
2. Press
3. Use
and press the Left Soft Key
My Ringtones.
to scroll to a ringtone
[Set As].
G
G
Ringtone
Contact ID: Scroll and select
the Contact to be identified by the
ringtone you selected.
G
Alert Sounds: Press the
corresponding number key to set
the ringtone for one of the
following:
All Messages/ TXT Message/
Pic/Video/Voice Message/
Voicemail
29
MESSAGING
1. New Message
MESSAAGING
SHORTCUT
Allows you to send messages (Text,
Picture, Video, and Voice). Each
message has a destination (Address)
and information (Message). These are
dependent upon the type of message
you want to send.
From standby mode with the flip open, pressing
the Left Soft Key
MESSAGING.
is a hot key to your
G
Check various types of messages
by pressing the Left Soft Key
1.1 TXT Message
[Message]
.
G
You can call the person that sent
you a message by simply pressing
The Basics of Sending a Message
Using the Internal Keypad
the internal Send key
external Send key
or the
when the
1. Open the flip and press
[MENU].
message is highlighted.
2. Press
3. Press
4. Press
Messaging.
The phone can store over 690
New Message.
TXT Message.
messages. The information stored in the
message is determined by phone model
and service capability. Other limits to
available characters per message may
exist. Please check with your service
provider for system features and
capabilities.
5. Enter the phone number of the
recipient or the email address for
an email message. You can enter
up to 10 addresses for a single
message.
6. Press
7. Type your message (text or email).
8. Press [SEND]
A sending screen is displayed.
.
New Message Alert
Your phone will alert you when you
have new messages.
.
1. The phone displays a message on
the screen.
2. The message icon ( ) is
displayed on the display screen. In
the case of a high priority
message, the icon flashes and a
warning message is displayed.
30
Customizing the Message Using
Options
High/ Normal
Callback # Inserts a pre-
programmed callback number with
your message.
1. Create a new Text Message.
G
Editing the To: field
On/Off/Edit
Save Quick Text Allows you to
save your message as a Quick
Text for future use.
Cancel Message Cancels
message editing and goes to
Message menu.
2. With the flip open, press the Right
Soft Key
[Add].
3. Select the option(s) to customize.
From Contacts/ From Recent
Calls/ Groups/ To Contacts
G
Editing Text
4. Complete and send by pressing
, or save the message.
2. With the flip open, press the Right
Soft Key
[Options].
Using the External Keypad
3. Select the option(s) to customize.
1. Unlock the Screen by pressing
twice.
Save As Draft Saves the message
into the Drafts folder.
2. Press
[MENU].
Add Allows you to add Graphic,
Animation, Sound, Quick Text,
Signature, Name Card, or Address
From Contacts.
3. Use the Directional Key
to
scroll to Messaging, then press
.
Copy Text Allows you to copy
text you highlight to paste it into
a text field.
Paste Allows you to paste the
text you last copied into a text
field.
4. Press
New Message.
5. Enter the phone number of the
recipient or the email address for
an email message. You can enter
up to 10 addresses for a single
message.
Format Text Allows you to change
the look of the text.
6. Press
.
Alignment/ Font Size/ Font Style/
Text Color/ Background
7. Type your message (text or email).
8. Press
Send.
[OPTIONS] and select
Priority Level Gives priority to the
message.
A sending screen is displayed.
31
MESSAGING
10.Use the Directional Key
highlight Subject and enter the
subject.
to
1.2 Picture Message
The Basics of Sending a Message
Using the Internal Keypad
11.Press
[SEND].
1. Press the Left Soft Key
A confirmation message is
displayed.
[Message]
2. Press New Message
3. Press Picture Message
.
.
Customizing the Message Using
Options
.
4. Enter the cellular phone number or
email address of the recipient.
1. Create a new Picture Message.
G
5. Press
6. Type your message (text or email).
7. Use the Directional Key to
highlight Picture and press the
.
Editing the To: field
2. With the flip open and the To: field
highlighted, press the Right Soft Key
[Add] .
3. Select the option(s) to customize.
From Contacts/ From Recent
Calls/ Groups/ To Online Album/
To Contacts
Left Soft Key
the Directional Key
to the image you want to send,
then press
[My Pics]. Use
to scroll
.
G
Editing Text or Subject
8. Use the Directional Key
to
highlight Sound, then press the
2. With the flip open and the Text:
field highlighted, press the Right
Left Soft Key
[Sounds]. Use
the Directional Key
to scroll
Soft Key
[Options].
to the audio file you want to send
then press
3. Select the option(s) to customize.
.
Preview Displays the Picture
message as it would be seen by
the recipient.
9. Use the Directional Key
highlight Name Card, then press
the Left Soft Key [Contacts].
to
to
Save As Draft Saves the message
into the Drafts folder.
Use the Directional Key
choose My Name Card/ From
Contacts, and press
.
Copy Text Allows you to copy
32
text you highlight to paste it into
a text field.
* Adding Slides to Your Picture
Message
Paste Allows you to paste the
text you last copied into a text
field.
When you want to send multiple
pictures, use the Add Slide option.
This allows you to create one
picture message with multiple
pictures attached to it.
Add Quick Text Inserts predefined
phrases.
Using the Internal Screen
Add Slide Insert multiple pictures
into a picture message.
1. Create a picture message.
Priority Level Gives priority to the
message.
High/ Normal
2. Add a picture to your message.
3. Press the Right Soft Key
[Options].
Cancel Message Cancels
message editing and goes to
Message menu.
4. Press
Add Slide (numbers
at the top right of the screen
change from 1/1 to 2/2 to indicate
second of two slides).
G
Editing Picture, Sounds, and
Name Card
5. Enter text (if necessary), then
arrow down to Picture and add
another picture file.
2. With the flip open and the
Picture, Sounds or Name Card:
field highlighted, press the Right
6. Continue adding slides and text
as desired. Use the Directional
Soft Key
[Options].
3. Select the options to customize.
Key
to scroll through the
attached slides.
Preview/ Save As Draft/ Add
Slide*/ Priority Level/ Cancel
Message
7. Complete and send by pressing
, or save the message.
4. Complete and send by pressing
, or save the message.
33
MESSAGING
Customizing the Message Using
Options
1.3 Video Message
The Basics of Sending a Message
Using the Internal Keypad
1. Create a new video message.
1. Press the Left Soft Key
[Message].
G
Editing the To: field
2. With the flip open and the To: field
highlighted, press the Right Soft
2. Press
3. Press
New Message.
Key
[Add].
Video Message.
3. Select the option(s) to customize.
4. Enter the cellular phone number or
email address of the recipient.
From Contacts/ From Recent
Calls/ Groups/ To Online Album/
To Contacts
5. Press the Directional Key
downward.
G
Editing Text
6. Type your message (text or email).
2. With the flip open and the Text:
field highlighted, press the Right
7. Use the Directional Key
highlight Video and press the Left
Soft Key [Videos]
Use the Directional Key
scroll to the video file you want to
send, then press
to
Soft Key
[Options].
.
to
3. Select the option(s) to customize.
Preview Displays the Video
message as it would be seen by
the recipient.
Save As Draft Saves the message
into the Drafts folder.
Copy Text Allows you to copy
text you highlight to paste it into
a text field.
.
8. Use the Directional Key
highlight Name Card and press
the Left Soft Key [Contacts].
to
to
Use the Directional Key
choose My Name Card/ From
Contacts, and press
.
Paste Allows you to paste the
text you last copied into a text
field.
9. Use the Directional Key
highlight Subject and enter the
subject.
to
Add Quick Text Inserts predefined
phrases.
10. Press
[SEND].
A confirmation message is
displayed.
34
Priority Level Gives priority to the
message.
4. Complete and send by pressing
, or save the message.
High/ Normal
1.4 Voice Message
Cancel Message Cancels
message editing and goes to
Message menu.
The Basics of Sending a Message
Using the Internal Keypad
G
1. Press the Left Soft Key
Editing Video
[Message].
2. With the flip open and the Video:
field highlighted, press the Right
2. Press
3. Press
4. Press
New Message.
Voice Message.
to start recording.
Soft Key
[Options].
3. Select the option(s) to customize.
Preview/ Save As Draft/ Priority
Level/ Remove Video/ Cancel
Message
5. Record your voice message.
6. Press to end recording.
G
Editing Name Card
7. Enter the cellular phone number or
email address of the recipient.
2. With the flip open and the Name
Card: field highlighted, press the
8. Press the Directional Key
Right Soft Key
[Options].
downward
Text field.
, and highlight the
3. Select the option(s) to customize.
Preview/ Save As Draft/ Priority
Level/ Remove Name Card/
Cancel Message
9. Type your message (text or email).
10.Use the Directional Key to
highlight Name Card, then press
the Left Soft Key [Contacts].
G
Editing Subject
Use the Directional Key
choose My Name Card/ From
Contacts, and press
to
2. With the flip open and the Subject:
field highlighted, press the Right
.
Soft Key
[Options].
11.Use the Directional Key
highlight Subject and enter the
subject.
to
3. Select the option(s) to customize.
Preview/ Save As Draft/ Copy
Text/ Paste/ Add Quick Text/
Priority Level/ Cancel Message
35
MESSAGING
G
G
12.Press
A confirmation message is
displayed.
[SEND]
.
Press
message.
[OPEN] to open the
Press the Right Soft Key
[Options]
.
2. Inbox
Your phone will alert you when you
have new messages.
Reply Replies to the message
sender.
Reply With Copy Replies to the
message sender with a copy of
their message included.
G
By displaying a notification
message on the screen.
G
By sounding an alert tone or
Forward Forwards a received
message to other destination
address(es).
vibrating, depending on your
personal settings.
G
By displaying
on the screen
Add To Contacts Stores the
callback number, email address,
and numbers from the address of
the received message into your
Contacts.
(it blinks if it's a high priority
message).
NOTE If you receive the same message
twice, your phone deletes the older
one and the new one is stored as a
DUPLICATE.
Extract Addresses Allows the
address(es) included in the
message to be extracted for
viewing.
Viewing Your Inbox
Using the Internal Keypad
1. Open the flip and press
[MENU].
Sort By Sender (Sort By Time)
Allows you to sort your messages
by sender name or by time
received.
2. Press
3. Press
Messaging.
Inbox
.
Manage Inbox Allows you to
erase, mark, unmark, lock, or
unlock your Inbox messages.
4. Use the Directional Key
scroll to a message entry.
to
5. Options from here:
Message Info Displays
information about the selected
Inbox message.
G
Press the Left Soft Key
[Erase].
36
Message Icon Reference
New/Unread TXT Messages
Forward Forwards a sent message
to other destination address(es).
Send Allows you to retransmit the
selected message. For multimedia
messages, ‘Resend’ is displayed.
Opened/Read TXT Messages
Priority High
Locked
Add To Contacts Stores the
callback number, email address,
and numbers from the address of
the received message into your
Contacts.
New/Unread Picture/Video
Messages
Open/Read Picture/Video
Messages
Sort By Recipient (Sort By Time)
Allows you to sort your messages
by recipient name or by time sent.
3. Sent
Up to 150 sent messages can be
stored. View message contents and
use Options to verify transmission
information.
Manage Sent Allows you to
erase, mark, unmark, lock, or
unlock your Sent messages.
Message Info Displays
information about the selected
Sent message.
Using the Internal Keypad
1. Open the flip and press
[MENU].
NOTE Options may vary depending on the
type of message.
2. Press
3. Press
Messaging.
Sent
.
Message Icon Reference
4. Use the Directional Key
scroll to a message entry.
to
Text/Picture/Video
Messages sent
5. Options from here:
Message delivered
G
Press the Left Soft Key
Text/Picture/Video
Messages failed
[Erase]
.
G
G
Press
[OPEN].
Press the Right Soft Key
Message pending
[Options].
37
MESSAGING
Multiple Messages sent
Multiple Messages delivered
Multiple Messages failed
Add To Contacts Stores the
callback number, email address,
and numbers from the address
included in the Draft message
into your Contacts.
Multiple Messages
incomplete
Manage Drafts Allows you to
erase, mark, unmark, lock, or
unlock your Draft messages.
Priority High
Locked
Message Icon Reference
Draft Text
4. Drafts
Draft Picture/Video
Displays messages started, but not
yet sent.
5. Voicemail
Using the Internal Keypad
Allows you to view the number of
new voice messages recorded in
the Voicemail box. Once you
exceed the storage limit, old
messages are overwritten. When
you have a new voice message,
your phone will alert you.
1. Open the flip and press
[MENU].
2. Press
3. Press
Messaging.
Drafts.
4. Use the Directional Key
scroll to a message entry.
to
Checking Your Voicemail Box
Using the Internal Keypad
5. Options from here:
1. Open the flip and press
[MENU].
G
Press the Left Soft Key
[Erase].
2. Press
3. Press
Messaging.
Voicemail
G
Press
[EDIT].
.
G
Press the Right Soft Key
4. Options from here:
[Options].
G
Press the Left Soft Key
[Clear] to delete information, and
Send Sends the selected
message to the recipient.
then press
[Yes].
38
G
Press
or
[CALL] to
7. Email
Allows you to send and receive
emails at any time.
listen to the message(s).
OR
Using the Internal Keypad
1. Dial *86 (*VM) then press
from your phone or dial your
wireless phone number from any
touch-tone phone.
1. Open the flip and press
[MENU].
2. Press
3. Press
Messaging.
Email
2. When the recorded announcement
.
begins, press
applicable).
to interrupt (if
4. Select Mobile Email or Mobile
Web Email, then press
.
3. An easy-to-follow setup tutorial will
begin. Follow the instructions to
set up your new password and
record a greeting.
5. Use the Directional Key
highlight your email service
provider, then press
to
.
6. Mobile IM
8. Chat
Allows you to send and receive
Instant Messages at any time.
Allows you to chat with Internet
Messenger users.
Using the Internal Keypad
Using the Internal Keypad
1. Open the flip and press
1. Open the flip and press
[MENU].
[MENU].
2. Press
3. Press
Messaging.
Mobile IM
2. Press
3. Press
Messaging.
Chat
.
.
4. Use the Directional Key
highlight your IM service provider,
then press
to
4. Use the Directional Key to
highlight your Chat service
.
provider, then press
.
39
MESSAGING
4. Font Size on Internal Display
Message Settings
Allows you to set the size of the
screen characters to Normal or
Large.
Allows you to configure settings for
your messages.
Using the Internal Keypad
1. Open the flip and press
[MENU].
5. TXT Auto View (On/On+Readout/
Off)
2. Press
3. Press the Left Soft Key
[Settings]
4. Use the Directional Key
scroll to one of the settings and
press to select it.
Messaging.
Allows received message content to
be automatically displayed on the
screen and even read aloud, or
require the message to be opened to
view message content.
.
to
6. TXT Auto Play (On/Off)
Allows the display to automatically
scroll down while viewing messages.
Message Settings Sub-Menu
Descriptions
7. Pic-Video Auto Receive (On/Off)
1. Entry Mode (Word/Abc/ABC/123)
Allows you to automatically
download the content when receiving
a Picture/ Video message.
Allows you to select the default input
method.
2. Auto Save (On/Off/Prompt)
8. Quick Text
Allows you to automatically save your
transmitted messages in the Sent
folder.
Allows you to display, edit, and add
text phrases. These text strings allow
you to reduce manual text input into
messages.
3. Auto Erase (On/Off)
Allows read messages to be deleted
automatically when you exceed the
storage limit.
40
9. Voicemail #
G
Press
Erase Inbox to erase
All (read and unread) Messages
or Only read Messages in the
Inbox.
Allows you to manually enter the
access number for Voicemail Service.
This number should be only used
when a VMS (Voicemail Service)
access number is not provided from
the network.
G
G
G
Press
Erase Sent to erase
all unlocked messages stored
in the Sent folder.
Press
Erase Drafts to
0. Callback # (On/Off)
erase all unlocked messages
stored in the Drafts folder.
Allows you to automatically send a
designated callback number when
you send a message.
Press
Erase All to erase
all messages from the Inbox,
Sent, and Drafts folders (except
locked messages). You can
choose whether or not unread
messages will be erased.
*. Signature (None/Custom)
Allows you make/edit a signature to
automatically send with your
messages.
4. Select Yes to erase the messages
selected.
Erasing Messages
A confirmation message is
displayed.
Allows you to erase messages stored
in your Inbox, Sent, or Drafts folders.
You can also erase all messages at
the same time.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press the Right Soft Key
[Options]
Messaging.
.
41
RECENT CALLS
G
Press the Left Soft Key
[Message] to select:
TXT Message/ Picture
Message/ Video Message/
Voice Message
RECENTT CALLS
The Recent Calls Menu is a list of
the last phone numbers or Contact
entries for calls you placed,
accepted, or missed. It's continually
updated as new numbers are
added to the beginning of the list
and the oldest entries are removed
from the bottom of the list.
2. Received
Allows you to view the list of
incoming calls; up to 90 entries.
Using the Internal Keypad
1. Missed
1. Open the flip and press
Allows you to view the list of
missed calls; up to 90 entries.
[MENU].
2. Press
3. Press
Recent Calls.
Using the Internal Keypad
Received.
1. Open the flip and press
[MENU].
4. Use the Directional Key
scroll to an entry, then
to
2. Press
3. Press
Recent Calls.
G
Press
to view the entry.
Missed.
G
G
Press
the number.
to place a call to
4. Use the Directional Key
scroll to an entry, then
to
Press the Right Soft Key
[Options] to select:
G
Press
to view the entry.
Save To Contacts (Details)/
Erase/ Lock(Unlock)/ Erase
All/ View Timers
G
G
Press
the number.
to place a call to
Press the Right Soft Key
[Options] to select:
Save To Contacts (Details)/
Erase/ Lock(Unlock)/ Erase
All/ View Timers
G
Press the Left Soft Key
[Message] to select:
TXT Message/ Picture
Message/ Video Message/
Voice Message
42
3. Dialed
4. All
Allows you to view the list of
outgoing calls; up to 90 entries.
Allows you to view the list of all
calls; up to 270 entries.
Using the Internal Keypad
Using the Internal Keypad
1. Open the flip and press
1. Open the flip and press
[MENU].
[MENU].
2. Press
3. Press
Recent Calls.
2. Press
3. Press
Recent Calls.
Dialed.
All.
4. Use the Directional Key
scroll to an entry, then
to
4. Use the Directional Key
scroll to an entry, then
to
G
G
Press
to view the entry.
Press
to view the entry.
G
G
G
G
Press
the number.
to place a call to
Press
the number.
to place a call to
Press the Right Soft Key
[Options] to select:
Press the Right Soft Key
[Options] to select:
Save To Contacts (Details)/
Erase/ Lock(Unlock)/ Erase
All/ View Timers
Save To Contacts (Details)/
Erase/ Lock(Unlock)/ Erase
All/ View Timers
G
G
Press the Left Soft Key
[Message] to select:
TXT Message/ Picture
Message/ Video Message/
Voice Message
Press the Left Soft Key
[Message] to select:
TXT Message/ Picture
Message/ Video Message/
Voice Message
SHORTCUT
To view a quick list of all your recent
calls, press the internal
key or the
external key from standby mode.
43
RECENT CALLS
5. View Timers
Allows you to view the duration of
selected calls.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
Recent Calls.
View Timers.
4. Use the Directional Key
scroll to a call list.
to
Last Call/ All Calls/ Received
Calls/ Dialed Calls/ Roaming
Calls/ Transmit Data/ Received
Data/ Total Data/ Last Reset/
Lifetime Calls/ Lifetime Data
Counter
5. Reset the selected call list timer
by pressing the Left Soft Key
[Reset], or reset all the
timers by pressing the Right Soft
Key
[Reset All] if you want
to reset all the timers at once.
NOTE Last Call, Lifetime Calls, and
Lifetime Data Counter cannot be
reset.
44
CONTACTS
2. Contact List
Allows you to view your Contact
List.
CONTACTS
The Contacts Menu allows you to
store names, phone numbers and
other information in your phone’s
memory.
Using the Internal Keypad
1. Open the flip and press
[MENU].
SHORTCUT
With the flip open, the Right Soft Key
hot key to the Contact List.
is a
2. Press
3. Press
Contacts.
Contact List
.
1. New Contact
Allows you to add a new number to
your Contact List.
4. Press the Directional Key
to scroll through your Contacts
alphabetically.
G
Press the Right Soft Key
[Options] to select one of the
following:
NOTE Using this submenu, the number is
saved as a new Contact. To save the
number into an existing Contact, edit
the Contact entry.
New Contact/ Erase/ New TXT
Message/ New Picture
Message/ New Video
Message/ New Voice
Message/ Set As ICE Contact/
Call/ Erase All/ Send Name
Card
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
Contacts.
New Contact
.
G
Press the Left Soft Key
[Edit] to edit.
4. Enter the name and press the
Directional Key
downward.
G
Press
entry.
[VIEW] to view the
5. Use the Directional Key
scroll to the phone number type.
to
6. Enter the number and press
save.
to
NOTE For more detailed information, see
page 24.
45
CONTACTS
3. Groups
4. Speed Dials
Allows you to view your grouped
Contacts, add a new group, change
the name of a group, delete a
group, or send a message to
Allows you to view your list of
Speed Dials or designate Speed
Dials for numbers entered in your
Contacts.
everyone in the selected group.
Using the Internal Keypad
Using the Internal Keypad
1. Open the flip and press
1. Open the flip and press
[MENU].
[MENU].
2. Press
3. Press
Contacts.
2. Press
3. Press
Contacts.
Speed Dials.
Groups.
4. Use the Directional Key
to
4. Use the Directional Key
highlight a group.
to
scroll to a Speed Dial position, or
enter the Speed Dial digit and
press
[SET].
G
Press the Left Soft Key
[New] to add a new group to
5. Use the Directional Key
to
the list.
scroll to a Contact entry, then
press
.
G
Press the Right Soft Key
[Options] to select one of the
following:
New TXT Message/ New
Picture Message/ New Video
Message/ New Voice
Message/ Rename/ Erase /
Add / Send Name Card
6. Press
A confirmation message is
displayed.
[Yes].
G
Press
[VIEW] to view the
Group information.
46
6. The generic Contact label
changes to the specified name.
5. In Case of Emergency (ICE)
This menu allows you to store
names, phone numbers and other
information, which could be very
helpful in an emergency situation. It
also allows you to read, add, edit,
and erase notes that provide
important information about yourself
in case an emergency situation
arises.
Entering Your ICE Personal Info
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
Contacts.
In Case of Emergency.
4. Scroll to Personal Info, then
press
Using the Internal Keypad
.
1. Open the flip and press
[MENU].
5. Scroll to one of the Note entries,
then press
.
2. Press
3. Press
Contacts.
6. Enter information that would be
helpful in an emergency (e.g.,
your medical record number),
In Case of
Emergency.
4. Use the Directional Key
scroll to Contact 1, 2, or 3, then
then press
.
to
TIP
press
[ADD].
When you've assigned ICE Contacts and your
phone is locked for security, the Left Soft Key
appears as [ICE] allowing the emergency
information to be viewed without unlocking the
phone.
5. Press
your Contact List.
to add a Contact from
Scroll to the Contact, then press
.
ICE Contact Assigned is
displayed.
OR
Press
to enter information
not stored in your Contact List.
47
CONTACTS
6. My Name Card
Allows you to view all of your own
Contact information including name,
phone numbers, and email address.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Contacts.
My Name Card.
[EDIT].
5. Use the Directional Key
to
scroll to information fields, enter
your information as necessary,
then press
[SAVE].
TIP
You may send your name card using the Right
Soft Key
[Options].
48
1. Music & Tones
MEDIA CCENTER
Personalize your phone with
ringtones. A wide variety of choices
are available, such as current hits,
pop, hip-hop, and more.
Media Center allows you to do more
than just talk on your phone. Media
Center is a technology and service
that allows you to download and use
applications on your phone.
Access and Options
With Media Center, it's quick and
easy to personalize your phone to suit
your lifestyle and tastes. Just
download the applications that
appeal to you. With a wide range of
software available, from ringtones
and wallpapers, to games and
productivity tools, you can be assured
that you will find something useful,
practical, or entertaining.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
Media Center.
Music & Tones.
4. Use the Directional Key
to
highlight an option and press
, or press the corresponding
number key.
NOTE Do not insert or remove the microSD
card while playing, deleting or
downloading Pictures/ Videos/ Music/
Sounds.
TIP
Music Only Mode allows you to listen
exclusively to your music using your Bluetooth
headset (as you do with MP3 players). Set
Music Only Mode to On by pressing the left Soft
Key [Mode], then scroll to On and press
With this feature turned on, your listening
enjoyment won't be interrupted by calls.
Anything Unclear?
From the Media Center menu, press the
.
Right Soft Key
[Info] to see your
memory status, activity log, help text,
and Media Center status. Use the Help
option to view information from buying
new applications to expired
applications.
49
MEDIA CENTER
3. Press
4. Press
5. Press
Applications to shop for
ringtones.
Music & Tones.
Get New Ringtones.
Get New
1.1 V CAST Music
Transform your wireless device into
a portable music player. Download
new songs from the Media Center
music catalog right onto your
wireless device or a PC. Then you
can sync your music between your
PC and phone.
1.3 My Ringtones
Allows you to set a ringtone as your
phone's ringer or alert sound, and
download new ringtones.
Using the Internal Keypad
1. Open the flip and press
[MENU].
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Media Center.
Music & Tones.
V CAST Music.
2. Press
3. Press
4. Press
5. Use
Media Center.
Music & Tones.
My Ringtones.
NOTE Additional charges for music may
apply. V CAST Music service is not
available in all areas. Check
to scroll to a ringtone
and press
[PLAY] to preview
www.verizonwireless.com/getitnow
website for details.
the ringtone. Press the Left Soft
Key [Set As] to set the ringtone
as one of the following:
1.2 Get New Ringtones
Allows you to connect to Media
Center and download various
ringtones.
G
G
G
Ringtone: Sets the selected
ringtone as your phone's default
ringtone.
Using the Internal Keypad
Contact ID: Scroll and select
the Contact to be identified by the
ringtone you selected.
1. Open the flip and press
[MENU].
Alert Sounds: Press the
corresponding number key to set
2. Press
Media Center.
50
the ringtone for one of the
following:
All Messages/ TXT Message/
Pic/Video/Voice Message/
Voicemail
Playing Your Music
It’s easy to find and play the music
you’ve stored in your phone.
Access My Music
Using the External Keypad
1.4 My Music
1. Unlock the exterior screen by
Allows you to store and to listen to
music right from your phone.
Connect to V CAST to download a
variety of music, transfer music
between your phone and your PC,
manage and organize your music
files, and more.
pressing
Music Key
and then press the
.
2. Press the Directional Key
to select Play All/ Shuffle/
Playlists(Songs) and press
.
Use the Directional Key
to
SHORTCUT
scroll through the songs and
Unlock the exterior screen by pressing
then press the Music Key
press
to play a song.
.
While playing music
NOTE File storage varies according to the
size of each file as well as memory
allocation of other applications.
Press Up on the Directional Key
to skip to the next song or
press and hold the Directional
Key Up
Press Down on the Directional
Key to go back to previous
to fast forward.
Using the Internal Keypad
1. Open the flip and press
[MENU].
songs or press and hold the
Directional Key Down
rewind.
to
2. Press
3. Press
4. Press
Media Center.
Music & Tones.
My Music.
3. Press
to pause the song.
Using the Internal Keypad
5. Use the Directional Key
scroll to a category, then press
.
to
1. Open the flip and press
[MENU].
51
MEDIA CENTER
G
2. Press
3. Press
4. Press
Media Center.
Play the next song.
Music & Tones.
1.5 My Sounds
Allows you to select a desired
sound or record a new sound.
My Music.
5. Scroll to one of the following
options, then press
Genres/ Artists/ Albums/ Songs/
.
Using the Internal Keypad
1. Open the flip and press
Playlists/ Inbox/ Play All/ Shuffle
[MENU].
6. Scroll to a song and press
start the Music Player.
to
2. Press
3. Press
4. Press
5. Press
Media Center.
Music & Tones.
My Sounds.
Controlling the Music Player
If you keep the flip open while
listening to your music, use the
following to control the Music
Player:
Record New or scroll
and select a sound using the
Directional Key
.
Options with a sound file
highlighted:
G
Left Soft Key
Repeats the song.
[Repeat]
G
Press the Left Soft Key
G
Right Soft Key
[Options]
[Erase].
Allows you to choose:
Play All / Shuffle / My Music /
Shop / Listeners also liked /
Help
G
Press
[PLAY].
G
Press the Right Soft Key
[Options] to scroll to:
Send/ To Online Album/
Rename/ Lock(Unlock)/ Erase
All/ File Info
G
G
: Adjust the volume.
/
Scroll through the
song list.
G
G
Play / Pause the current
song.
Play the previous song.
52
NOTES
1.6 Sync Music
®
G
V CAST Music will only work with Windows
Allows you to synchronize your
music between your PC and your
phone. Transfer music files from
your PC to your phone's memory or
microSD memory card (sold
separately) and vice versa. Transfer
music you purchased from the
online V CAST Music Store to your
PC.
TM
XP and Windows Vista operating systems,
with Windows Media Player 10 or higher.
Mac OS is not supported.
®
Sync your music from your PC to
your V CAST Music wireless
device
1. Open Music Manager. Don’t
have music manager? Download
it for free at
www.verizonwireless.com/music
manager.
Download music to your PC
1. Open Music Manager. Don’t
have music manager? Download
it for free at
www.verizonwireless.com/music
manager.
2. Use the USB cable (sold
separately) to connect the cable
to your PC and phone.
3. Music Manager software will
automatically detect the phone,
and activate the “sync” mode.
2. Select the Buy Music tab.
3. Log in.
4. Go to My Purchases.
4. In V CAST Music Manager,
select songs you want to sync
from the Music On My PC tab
and drag them to the “Sync List”
box.
5. Songs that you’ve purchased but
have not yet downloaded are
indicated by an icon in the “d/l”
column on the right-hand side of
the list of songs.
5. In V CAST Music Manager,
select either the phone’s internal
memory or removable storage
card.
6. Check the box(es) of songs you
wish to download.
7. Select “Download.”
6. Select Sync Now in V CAST
Music Manager.
8. To play the song, you can find it
by selecting the Music On My PC
tab.
7. When complete, exit Sync Music
53
MEDIA CENTER
and disconnect the cable from
your phone.
2. Picture & Video
View, take, and trade your digital
pictures and videos right from your
wireless phone.
8. Under the Music & Tones menu,
open My Music to view and play
your music.
Access and Options
Using the Internal Keypad
NOTE A compatible USB cable (sold
separately) is required for syncing.
1. Open the flip and press
[MENU].
2. Press
3. Press
Media Center.
Picture & Video.
4. Use the Directional Key
highlight an option and press
to
, or press the corresponding
number key.
2.1 V CAST Videos
V CAST brings the world to your
mobile phone with full-motion video
and sound. Catch up with what’s
happening with video clips from
Music, Showcase, Comedy, News,
Sports, Net's Best, TV & Film,
Latino, Kids, and Lifestyle (Must be
in V CAST coverage area.
Additional fees may apply).
Using the Internal Keypad
1. Open the flip and press
[MENU].
54
2. Press
3. Press
4. Press
Media Center.
Picture & Video.
V CAST Videos.
To view a Streaming Video
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Media Center.
5. Press the Directional Key
view video clip categories and
to
Picture & Video.
press
6. Select the video clip you want to
view by pressing
to select a category.
V CAST Videos to
open Video Clips Catalog.
.
5. Use the Directional Key
navigate through the sub-
categories to find the video you
want.
to
Browsing, Selecting, and Playing
Video Clips
1. Open the flip and press
6. Read the description of the video
[MENU].
clip, and press
7. Select Yes to accept charges,
press and the Video Clip will
to view.
2. Press
3. Press
4. Press
Media Center.
Picture & Video.
V CAST Videos to
initiate transfer.
open Video Clips Catalog.
8. The video clip will begin playback
shortly after being selected.
5. Press the Directional Key
view Video Clip categories
including Music, Showcase,
Comedy, News, Sports, Net's Best,
TV & Film, Latino, Kids, and
Lifestyle.
to
To download a Video Clip
Using the Internal Keypad
1. Open the flip and press
[MENU].
6. Select content provider, then press
.
2. Press
3. Press
4. Press
Media Center.
Picture & Video.
7. Select the clip you want to view
(depending on the clips available,
you may need to select a sub-
V CAST Videos
.
5. Navigate thru the sub-categories
and find a video you can
download.
category first), then press
.
55
MEDIA CENTER
6. Use the Directional Key to find the
Deleting Video Clips
video clip you want, then read the
description of the video clip and
press the Right Soft Key
Using the Internal Keypad
1. Open the flip and press
[MENU].
[Options]
.
2. Press
3. Press
4. Press
Media Center.
7. Press
Save Video, and press
.
Picture & Video.
8. Select Yes to accept charges,
press and the video clip will
begin downloading.
V CAST Videos
.
5. Press the Left Soft Key
Videos]
[My
.
9. Once the video is finished
downloading, a message will
appear on your phone.
6. Select the video to delete using the
Directional Key.
7. Press the Right Soft Key
10. Select Yes and press
to view
[Options] and press
Erase.
video.
8. Press [Yes] to erase the video.
11. The video clip will be automatically
saved in My Videos.
Configure Alerts for New Video
Clips Using the Internal Keypad
NOTE Not all videos are downloadable. Only
videos that have the option to save
can be downloaded. Additional
charges for each video clip viewed
may apply. Video Clips service is not
available in all areas. Check
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Media Center.
www.verizonwireless.com/getitnow
website for details.
Picture & Video.
V CAST Videos
.
5. From Video Clips Catalog, select a
category.
6. Select Content Provider.
56
7. Press the Right Soft Key
[Options].
2. Press
3. Press
4. Press
Media Center.
Picture & Video.
8. Select Alerts and press
.
My Pictures
.
9. Select Configure Alerts and press
5. Use the Directional Key
highlight a picture and press the
[Erase] to
to
.
10. Select content for alerts desired
Left Soft Key
erase the selected picture. Press
[VIEW] to view the selected
picture. Press the Right Soft Key
[Options] to access
and press
to save.
2.2 Get New Picture
Allows you to connect to Media
Center and download a variety of
images for My Pictures.
additional options.
6. Select the option(s) to customize.
Send Picture Message
/
To
Using the Internal Keypad
Online Album Via Bluetooth
/
1. Open the flip and press
[MENU].
Set As Wallpaper/ Picture ID
Take Picture Turns on the camera
function.
2. Press
3. Press
4. Press
5. Press
Media Center.
Picture & Video.
Get New Pictures Download new
pictures.
Get New Pictures
.
Get New Applications.
Manage My Pics Allows you to
mark pictures and access
additional options.
2.3 My Pictures
Allows you to view and manage the
pictures stored in your phone. You
can also take new photos and
download new pictures.
Rotate/Zoom/Crop Allows you to
edit the picture.
Rename Allows you to rename the
selected picture.
Using the Internal Keypad
Print Print via Bluetooth/
Print Preferences
1. Open the flip and press
[MENU].
File Info Name/ Date/ Time/
Resolution/ Size/ Type
57
MEDIA CENTER
NOTE The option 'Via Bluetooth' is not
V CAST Videos Accesses V CAST
Videos feature.
displayed when you select pictures
protected by DRM (Digital Rights
Management). Also, the option is
available only when you select a
Bluetooth device that supports
receiving pictures.
Manage My Videos Allows you to
mark videos and access additional
options.
Set As Wallpaper Displays the
selected video file as the
background for your phone.
2.4 My Videos
Allows you to view and manage the
videos stored in your phone. You
can also record and download new
videos.
Rename Allows you to rename the
selected video.
File Info Name/ Date/ Time/
Duration/ Size
Using the Internal Keypad
6. Press
to play.
1. Open the flip and press
[MENU].
NOTE File storage varies according to the
size of each file as well as memory
allocation of other applications.
2. Press
3. Press
4. Press
Media Center.
G
: Adjust the volume.
Picture & Video.
G
Left Soft Key
Unmute.
: Mute/
My Videos
.
5. Select a video with the Directional
G
G
: Pause/ Play.
Key
Key
and press the Right Soft
[Options]
.
Up Directional Key
:
Shows the full screen.
Select one of the following options
(Options are dependent on file
types):
G
Down Directional Key
: Stop
* For WMV files, the key
ends playing
the clip and goes back to My Videos menu.
Send Send a video message.
G
G
Right Directional Key
Left Directional Key
: FF
Record Video Turns on the video
camera function.
: Rewind
To Online Album Accesses the
Online Album.
58
5. Hold the phone horizontally to take
pictures.
2.5 Take Picture
Take
pictures
straight
from your
phone.
6. Set the brightness by pressing the
Directional Key
, zoom by
pressing the Directional Key
and press the Right Soft Key
,
[Options] to change other settings.
G
Select the option(s) to customize.
RESOLUTION 1600X1200/
1280X960/ 640X480/ 320X240
Camera Lens
Camera Key
SELF TIMER Off/ 3 Seconds/
5 Seconds/ 10 Seconds
TIPS
G
To take a clear picture, use the Up/Down
Directional Keys to set the proper brightness
level before taking the picture.
WHITE BALANCE Auto/ Sunny/
Cloudy/ Fluorescent/ Glow
G
To set the zoom level, before taking a picture
open the flip completely to reveal the side
keys (Volume Keys) and use them to zoom.
Keep in mind that Zoom is not available when
the camera is set to the highest resolution.
You can also use the Left/Right Directional
Key to zoom.
SHUTTER SOUND Shutter/ No
Sound /Say “Cheese”/ Ready! 1 2 3
COLOR EFFECTS Normal/
Negative/ Aqua/ Sepia/
Black&White
G
G
Avoid jolting the camera.
Wipe the camera lens with a soft cloth.
NIGHT MODE On/ Off
G
Do not cover the lens with your finger.
SAVE OPTION Internal/ External
PHOTOMETRY Average/ Spot
EXTERNAL DISPLAY On/ Off
CAPTURE MODE Camera/ Video
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Media Center.
7. Take a picture by pressing
or located above the Right
Picture & Video.
Soft Key
.
Take Picture
.
59
MEDIA CENTER
G
8. Save, send, or erase the picture.
Select the option(s) to customize.
G
G
G
Press the Left Soft Key
[Save] to store it in My Pictures.
RECORDING TIME For Send/
For Save
RESOLUTION 320X240/ 176X144
SAVE OPTION Internal/ External
COLOR EFFECTS Normal/
Negative/ Aqua/ Sepia/
Black&White
Press
[SEND] to send a
picture message.
Press the Right Soft Key
[Erase] to delete it.
WHITE BALANCE Auto/ Sunny/
Cloudy/ Fluorescent/ Glow
CAPTURE Camera/ Video
2.6 Record Video
Lets you
record a
video
7. Press
[REC] to begin
message
with sound.
recording, and again to stop.
8. Save, send, or erase the video.
Using the Internal Keypad
G
Press the Left Soft Key
1. Open the flip and press
[Save] to store it in My Videos.
[MENU].
G
Press
[SEND] to send a video
2. Press
3. Press
4. Press
Media Center.
message.
G
Picture & Video.
Press the Right Soft Key
[Erase] to delete it.
Record Video
.
5. Hold the phone horizontally to
record videos.
2.7 Online Album
You can access your Online Album,
and upload your pictures and videos.
6. Set the brightness by pressing the
Directional Key
pressing the Directional Key
or press the Right Soft Key
, zoom by
Using the Internal Keypad
1. Open the flip and press
[MENU].
[Options] to change other settings.
2. Press
Media Center.
60
SHORTCUTS
3. Press
4. Press
Picture & Video.
Pressing the Directional Key
shortcut to accessing Browser when the flip is
open.
UP is the
Online Album.
3. Games
Launching the Browser
Using the Internal Keypad
Allows you to download games and
applications from the Media Center
server. Choose the software you
want from the list displayed on the
screen.
1. Open the flip and press
[MENU].
2. Press
3. Press
Media Center.
Mobile Web
.
Using the Internal Keypad
1. Open the flip and press
[MENU].
Ending a Browser Session
End a Browser session by pressing
.
2. Press
3. Press
4. Press
Media Center.
Games.
Navigating Through the Browser
[Get New
On-screen items may be presented
in one of the following ways:
Applications].
G
Numbered options
4. Mobile Web
Allows you to access news, sports,
weather, and email from your
Verizon Wireless device.
Accessibility and selections within
this feature are dependent upon
your service provider. For specific
information on Mobile Web access
through your phone, contact your
service provider.
You can use your numeric
keypad or you can select the
items by moving the cursor and
pressing the appropriate Soft
Keys.
G
Links embedded in content
You can act on the options or the
links by using the Soft Keys just
below the display screen.
61
MEDIA CENTER
G
Text or numbers
highlighted item.
You can select the items by
moving the cursor and pressing
the appropriate Soft Keys.
Left Soft Key
Left Soft Key
is used primarily
for first options or selecting an item,
but its function may change,
depending on the content
displayed.
Scrolling
Use
to scroll through the
content if the current page does not
fit on the screen. Currently selected
item is indicated by the cursor on
the screen.
Right Soft Key
Right Soft Key
primarily for the Browser menu.
is used
Scrolling by Page
Entering Text, Numbers, or Symbols
Press the Side Volume Keys to
move up and down a page. Make
sure that the flip is all the way open.
When prompted to enter text, the
current text entry method appears
above the Right Soft Key
as
Word, Abc, ABC, 123 or Symbols.
Home Page
To change the input mode, press
To go to the Home Page, press and
the Right Soft Key
. To input
hold
or
.
Symbols, press the Sym key
View Browser Menu
then press the key that has the
desired symbol on it. To create an
upper case character, use the Shift
Press the Right Soft Key
use the Browser menu. Make sure
that the flip is all the way open.
to
key
.
Soft Keys
Deleting Text/Number Entered
To navigate to different screens or
select special functions, use the
Soft Keys. The function associated
with the Soft Keys can change for
each page and depends on each
When entering text or numbers,
press
number, letter, or symbol. Press and
hold to clear the input field
completely.
to clear the last
62
SM
Initiating a Phone Call from the
Browser
VZ Navigator
SM
VZ Navigator is an application
downloadable from the Browse &
Download menu. Now you can find
the address of a great restaurant or
the nearest ATM. Check movie
times. Discover the latest hot spots.
And know exactly how to get to
You can make a phone call from the
Browser if the site you are using
supports the feature (the phone
number may be highlighted and the
Left Soft Key
appears as
Select). The browser connection is
terminated when you initiate the
call. After you end the call, your
phone returns to the screen from
which you initiated the call.
SM
where you’re going. VZ Navigator
puts all the advanced features of
the latest GPS devices and systems
on your wireless device — at a
fraction of the price.
5. Browse & Download
NOTES
SM
•
To use VZ Navigator , you must turn location
on. (See page 87)
Allows you to access Browse &
Download to use Mobile Email, VZ
SM
•
Download and subscription required for use
only in National Enhanced Service Coverage
Area: accuracy and completeness of
information is not guaranteed; information
about location of device will be used to deliver
service. Additional fees may apply.
Navigator , and other applications
you choose.
Using the Internal Keypad
1. Open the flip and press
[MENU].
See brochure for details or visit
www.verizonwireless.com.
2. Press
3. Press
4. Press
Media Center.
Browse & Download
.
Get New
Applications.
5. Select from various Browse &
Download menu choices.
63
MEDIA CENTER
Mobile Email
6. Extras
Mobile Email is an application
downloadable from the Browse &
Download Menu. Don't miss an
important email. Thanks to Mobile
Email, you can get your emails on
your phone, while you're on the go.
Mobile Email works with many
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Media Center.
Extras
[Get New Applications].
.
®
®
providers, including Yahoo! , AOL ,
and Verizon.net. Get alerts from
2
your enV when new email has
arrived.
Additional fees may apply.
See brochure for details or visit
www.verizonwireless.com.
NOTE Several Email providers are available
®
including Yahoo! Mail, WindowsLiveMail,
®
AOL , AIM, Verizon.net, and others.
64
EMAIL / VZ NAVIGATOR
EMAIL
VZ NAVIIGATOR
The VZ Navigator Menu allows you
to get directions to locations when
you're out and about.
The Email Menu allows you to set
up your email account and
conveniently exchange emails
wirelessly with your device. To use
this feature, download appropriate
applications first; read the
G
Voice-prompted turn-by-turn
directions with auto-rerouting if
you miss a turn
instructions on your device and
follow them.
G
View detailed color maps that
can be panned and zoomed
1. Open the flip and press
[MENU].
G
Find points of interest
1. Open the flip and press
[MENU].
2. Press
Email.
2. Press
VZ Navigator.
65
SETTINGS & TOOLS
Access and Options
Using the Internal Keypad
SETTINGGS & TOOLS
1. My Account
1. Open the flip and press
Check your subscription
information, ranging from your
payment plan to other available
services.
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Tools
Voice Commands
.
.
.
Using the Internal Keypad
5. Press the Right Soft Key
[Settings].
1. Open the flip and press
[MENU].
Digit Dial Readout On/Off
2. Press
3. Press
Settings & Tools
.
Choice List Automatic/Always Off
My Account
.
Sensitivity Adjust the sensitivity as
Reject More/Automatic/Reject Less.
2. Tools
Train Voice If the phone asks you to
repeat your voice command too often,
train the phone to recognize your
voice patterns. Train Words/Train
Digits
Your phone tools include Voice
Commands, Calculator, Ez Tip
Calculator, Calendar, Alarm Clock,
Stopwatch, World Clock, Notepad,
and USB Mass Storage.
Prompts Mode/Audio
Playback/Timeout
2.1 Voice Commands
For Mode, set Prompts/Readout +
Alerts/Readout/Tones Only.
For Audio Playback,
This feature provides you with the
following options equipped with AVR
(Advanced Voice Recognition)
technology. Each option has its detailed
information on the phone and you can
check it out by pressing the Left Soft
set Speakerphone or Earpiece.
For Timeout, set 5 seconds or
10 seconds.
Key
[Info].
Call Alert Ring Only/Caller ID +
Ring/Name Repeat
67
SETTINGS & TOOLS
2.1.1 Call <Name or Number>
options will be provided.
Say "Call" and then call someone
simply by saying the phone number or
name. Please speak clearly and
exactly as in your Contacts list. When
you have more than one contact
number, you can state the name and
the number type of the contact (for
example, 'Call John Work').
2.1.4 Check <Item>
The "Check" command allows you to
check out a wide range of items from
the battery level, service mode, signal
strength, GPS location, network
status, volume, number of missed
calls, voicemail, messages, to time
and date.
2.1.2 Send Msg to <Name or
Number>
2.1.5 Contacts <Name>
You can look up names in your
Contacts (for example, 'Contacts
John'):
Say 'Send Message' and the voice
command will prompt you for the type
of message. After choosing the
message type, system will ask you for
the contact name, number or group. It
will automatically start a message. If
you say a full-sentence command,
such as 'Send Message to Bob', it
would automatically start a text
message without asking for the
message type. When using 'Send
Message' command, speak clearly
and say the number, group name, or
name exactly as it is entered in your
Contacts list.
Read out/Create New/Erase/Modify
2.1.6 My Account
The "My Account" command provides
you with direct access to your
Verizon Wireless account
information.
2.1.7 Help
Provides a general guideline to using
Voice Commands.
NOTE When saying phone numbers in a
Voice Command, say the numbers
continuously (e.g., avoid hesitating
between numbers).
2.1.3 Go to <Menu>
The 'Go to' command allows you to
access a menu within the phone (for
example, 'Go to Calendar').
If no menu option is stated, a list of
68
2.2 Calculator
2.3 Ez Tip Calculator
Allows you to perform simple
Allows you to quickly and easily
calculate bill amount(s) using the bill
total, tip % and number of people as
variables.
mathematical calculations. You can
enter numbers up to eight digits and
the sixth decimal place. decimal
place. Calculations can be made with
up to 4 lines of input at one time.
Using the Internal Keypad
1. Open the flip and press
[MENU].
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools.
Tools.
2. Press
3. Press
4. Press
Settings & Tools.
Ez Tip Calculator.
Tools.
5. Enter values for all variable fields
(Total bill, Tip (%), Split) and the
corresponding calculation fields
(tip and total for each person) are
updated automatically.
Calculator.
5. Enter numbers and appropriate
operation key(s) to perform
desired calculations. To cancel a
calculation, press the Left Soft Key
[Reset].
6. Press the Left Soft Key
[Reset] for another calculation.
6. Press the Right Soft Key
[Options] to add parenthesis or
power for exponential numbers.
69
SETTINGS & TOOLS
7. Enter Subject, then scroll down
to set other remaining settings.
2.4 Calendar
Allows you to keep your agenda
convenient and easy to access.
Simply store your appointments, and
your phone will alert you with
reminders.
8. Scroll to a Calendar setting field,
then press the Left Soft Key
[Set]. For each Calendar event
you can set:
G
G
G
G
G
G
G
Start Time
Repeat
Alerts
End Time
Until
Tones
Using the Internal Keypad
SHORTCUT
With the flip open, the Directional Key
the hot key to Calendar in standby mode by
default.
is
Vibrate
9. Use the Directional Key
choose a setting, then press
to
.
1. Open the flip and press
[MENU].
10. Press
[SAVE] when Calendar
information is complete.
2. Press
3. Press
4. Press
Settings & Tools.
Tools.
2.5 Alarm Clock
Calendar.
Allows you to set up to three alarms.
At the alarm time, Alarm 1 (or 2 or 3)
will be displayed on the LCD screen
and the alarm will sound.
5. Use the Directional Key
scroll to the scheduled day.
to
Left
previous day.
Moves cursor to the
Using the Internal Keypad
1. Open the flip and press
[MENU].
Right
next day.
Moves cursor to the
Moves to the previous
Moves to the next
Up
week.
2. Press
3. Press
4. Press
Settings & Tools.
Tools.
Down
week.
Alarm Clock.
6. Press the Left Soft Key
[Add].
70
5. Use the Directional Key
scroll to an Alarm (1, 2, or 3), then
press
to
2.6 Stopwatch
Allows you to use your phone as a
typical stopwatch.
.
6. Enter the alarm information
including:
Using the Internal Keypad
1. Open the flip and press
[MENU].
G
G
Turn On/Off
Repeat
Set Time
Ringtone
G
G
2. Press
3. Press
4. Press
5. Press
Settings & Tools.
7. Use the Directional Key
scroll to the information you want
to set, then press the Left Soft
to
Tools.
Stopwatch.
Key
[Set] to view your
[START], then options
setting choices.
from here:
8. Press [SAVE] after setting all
G
Press the Left Soft Key
of the Alarm fields as necessary.
When the alarm goes off, you
can choose to "snooze" or
[Lap].
G
Press
[STOP] to stop.
"dismiss" the alarm. To turn it off,
6. Press the Right Soft Key
[Reset] to reset the stopwatch.
press
, the side keys, any of
the alphanumeric keys, or the
vibrate mode key.
2.7 World Clock
Allows you to determine the current
time in another time zone or country
by navigating with the left or right
Directional Key.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
Settings & Tools
.
Tools.
71
SETTINGS & TOOLS
4. Press
World Clock.
2.9 USB Mass Storage
This menu allows you to transfer
content from your phone to your PC
(or vice versa) when your phone is
connected to your PC with a
compatible USB cable. You can only
access this menu when a microSD
card is inserted in your phone (see
page 18 to insert it).
5. Press the Right Soft Key
[Cities] to choose from a list of
available cities.
6. Select a city from the list, then
press
. The display shows the
position of the city on a global map.
7. Press
again to zoom in on the
city and view its date and time
infomation.
NOTE Do not insert or remove the microSD
while playing, deleting or downloading
Pictures/Videos/Music/Sounds.
NOTE With the Left Soft Key
[Set
DST] set to daylight saving time.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2.8 Notepad
Allows you to add, read, edit, and
erase notes to yourself.
2. Press
3. Press
4. Press
Settings & Tools
Tools
USB Mass Storage
.
.
Using the Internal Keypad
.
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Tools
Notepad
.
.
.
5. Press the Left Soft Key
to write a new note.
[Add]
6. After filling in the note, press
to save it.
72
2
®
enV provides you with the ability to use the
3. Bluetooth Menu
integrated music player (and optional
Bluetooth stereo headset) to listen to WMA,
2
The enV is compatible with devices
that support the Bluetooth Headset,
®
®
MP3, AAC, AAC+, etc. music providing you
with lots of listening enjoyment.
Object Push Profile allows you to transfer a
contact entry (vCard) and/or transfer a
calendar event (vCal) to another OPP-enabled
Handsfree, Dial Up Networking,
Stereo, Phonebook Access, Basic
Printing, Object Push, File Transfer,
Basic Imaging and Human Interface
profiles.
You may create and store 20
pairings within the enV and
connect to one device at a time.
The approximate communication
range for Bluetooth wireless
G
®
Bluetooth device.
G
Image transfer of user generated content is
available via the Basic Imaging Profile.
This profile allows sending of non-protected
images to a compatible device for storing and
printing.
Phonebook Access Profile allows your car kit
and your phone to share information. By
pairing the devices and connecting with this
profile, you can access and use your phone
book data while in your vehicle.
File Transfer allows sending or receiving non-
protected data files to a compatible Bluetooth
device.
Basic Print Profile is a profile to transfer user-
generated images to a printer and print them
out.
The steps are: Open the flip and press
[MENU] press
2
®
G
technology is up to 30 feet (10 meters).
Bluetooth QD ID B013583
NOTE Read the user guide of each
®
Bluetooth accessory that you are
G
G
®
trying to pair with your phone because
the instructions may be different.
®
NOTE Your phone is based on the Bluetooth
specification, but it is not guaranteed to
work with all devices enabled with
®
Bluetooth wireless technology.
Phone does not support ALL
MEDIA CENTER menu
®
Bluetooth OBEX Profiles.
press Picture & Video press
* For vehicle/accessory compatibility
go to www.verizonwireless.com/
bluetoothchart.
My Pictures highlight the picture you want to
print and press the Right Soft Key [Options]
use the Directional Key
and press Print via Bluetooth to select a
Bluetooth device and print the selected file.
to scroll to Print
TIPS
G
®
The Human Interface Design (HID) profile is
supported only from keyboard input and
available when the flip is open or closed.
G
Headset and handsfree profiles support voice
®
calls with a compatible Bluetooth headset or
®
car kit. Bluetooth Stereo profiles supported by
73
SETTINGS & TOOLS
3.1 Add New Device
and press
.
Pairing is the process that allows a
handset to locate, establish, and
register 1-to-1 connection with a
target device.
9. Once pairing is successful, select
either Always Ask or Always
Connect (except audio devices)
and press
.
®
To Pair with a New Bluetooth
10. Once connected, you will see
the device listed in the
Device Using the Internal Keypad
®
®
Bluetooth Menu and the
1. Follow the Bluetooth accessory
®
Bluetooth device connected
instructions to set the device to
pairing mode.
icon
will show up on your
enunciator when connected to
2. Press
3. Press
4. Press
5. Press
[MENU].
®
the Bluetooth device.
Settings & Tools
Bluetooth Menu.
Add New Device.
.
Icon Reference in Adding New
Device
®
When the Bluetooth wireless
connection is built and paired devices
are found, the following icons are
displayed. (See Next Page)
Set the desired device to pairing.
®
6. If Bluetooth power is set to off,
you will be prompted to turn
power on. Select Yes and press
then press
again.
7. The device will appear in Add
New Device menu once it has
been located. Highlight the
device and press
.
8. The handset will prompt you for
the passkey in BT. Consult the
®
Bluetooth accessory
instructions for the appropriate
passkey in BT (typically “0000” -
4 zeroes). Enter the passkey in BT
74
G
G
Icon References When a
Bluetooth Wireless Connection
Icon References When
Successfully Connected
®
is Searched (neither connected
When an only mono
nor paired).
headset is connected with
2
your enV device
When an audio device is
2
searched by your enV
When an only stereo
device
headset is connected with
2
your enV device
When a PC is searched by
your enV device
2
When stereo headsets and
mono headsets are all
connected with your enV
device
When a PDA is searched
by your enV device
2
2
When another phone
When Car kit or Handsfree
device is connected with
device is searched by your
2
enV device
2
your enV device
When a printer is found by
2
your enV device
My Phone Name
When other undefined
Allows you to edit the name of the
Bluetooth device when Add New
Device menu is highlighted.
devices are found by your
®
2
enV device
When a keyboard is found
2
by your enV device
Using the Internal Keypad
When Car kit or Handsfree
device is searched by your
1. Press
2. Press
3. Press
[MENU].
2
enV device
Settings & Tools
.
Bluetooth Menu.
4. Press the Right Soft Key
[Options].
5. Press
My Phone Name.
to clear the existing
6. Press
name or edit it.
75
SETTINGS & TOOLS
7. Use the keypad to enter a new
custom name.
3. Press
Bluetooth Menu.
4. Press the Right Soft Key
8. Press to save and exit.
[Options].
TIP
5. Press
Discovery Mode.
®
Bluetooth wireless connection is dependent on
your Blueooth stereo device. Even though you
want to connect with a headset that supports
both HFP and A2DP, you may only be able to
connect with one.
6. Use the Directional Key
scroll to a setting, then press
On/Off.
to
®
NOTE If you choose On for Discovery Mode,
your device is able to be searched by
other in-range Bluetooth devices.
Turn On
®
Allows you to set the phone's
Bluetooth power On/Off.
®
Supported Profiles
Allows you to see profiles that your
enV phone can support.
Using the Internal Keypad
2
1. Open the flip and press
[MENU].
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
Settings & Tools
.
Bluetooth Menu.
2. Press
3. Press
Settings & Tools
.
4. Press the Left Soft Key
[Turn On].
Bluetooth Menu
.
4. Press the Right Soft Key
[Options].
®
NOTE By default, your device’s Bluetooth
functionality is turned off.
5. Press
Supported Profiles.
Discovery Mode
Allows you to set whether your device
is able to be searched by other
Bluetooth devices in the area.
Last Search
Allows you to view the information of
the devices you have at least once
tried to search.
®
Using the Internal Keypad
1. Press
2. Press
[MENU].
Settings & Tools
.
76
5. Device Info: Shows the device
information.
Auto Pair Handsfree
If you attempt to pair a device that is
part of the handsfree/headset profile,
6. Send Name Card: You can transfer
Contacts list to other devices,
except audio devices.
the “PAIR”/
is selected. Your
device will automatically attempt to
pair using a “0000” passkey in BT.
7. Get Name Card: You can get My
Name Card info from the paired
phone.
Transferring Audio
®
When a Bluetooth audio device is
8. Exchange Name Card: You can
exchange My Name Card info with
the paired phone.
connected, Audio to Phone/Audio to
Device is displayed in the Options
menu only during a call.
9. Send Calendar Event: You can
transfer Calendar events to other
devices, except audio devices.
Audio To Phone Sound comes from
the handset.
Audio To Device Sound comes from
®
10. Send Image: You can transfer
images to a device that supports
Basic Imaging Profile (BIP) profiles.
the Bluetooth audio device.
You have the following options in the
paired device.
G
G
For headset devices:
For devices that support OBEX
profiles:
1. Remove Device: You can remove
the device from the pairing list.
1. Remove Device: You can remove
the device from the pairing list.
2. Rename Device: You can rename
the name of the paired device.
2. Rename Device: You can rename
the name of the paired device.
3. Service Discovery: Allows you to
search for the services that the
selected device supports.
3. Incoming Security: Allows you to
set permission before connecting
an incoming device.
4. Device Info: Shows the device
information.
4. Service Discovery: Allows you to
search for the services that the
selected device supports.
77
SETTINGS & TOOLS
NOTES
G
You can try playing ringtone sound
at each master volume level with
•
•
•
When the flip is open while viewing the pairing
list, you can disconnect the connected device
with the arrow signal by pressing
can turn it on by pressing again.
When an audio device is connected, then you
select another device and press , the
the Left Soft Key
[Play].
. You
4.2 Call Sounds
Allows you to set how the phone
alerts you for various types of
incoming calls.
The Call Sounds menu has a Call
Ringtone submenu and a Call Vibrate
submenu that are set independently.
connection is transferred from the audio
device to the other one.
Print Picture allows you to print to devices that
support BPP profiles.
4. Sounds Settings
Provides options to customize the
phone’s sounds.
4.2.1 Call Ringtone
Using the Internal Keypad
4.1 Master Volume
Allows you to set volume settings.
1. Open the flip and press
[MENU].
Using the Internal Keypad
2. Press
3. Press
4. Press
5. Press
Settings & Tools
Sounds Settings
Call Sounds
Call Ringtone
.
1. Open the flip and press
[MENU].
.
.
2. Press
3. Press
4. Press
Settings & Tools
Sounds Settings
Master Volume
.
.
.
6. Use the Directional Key
scroll to a ringtone then press
to save the sound.
to
.
5. Adjust the volume with the
Directional Key then press
to save the setting.
4.2.2 Call Vibrate
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
Settings & Tools.
78
3. Press
4. Press
5. Press
Sounds Settings
Call Sounds
Call Vibrate
.
4.4 Keypad Volume
Allows you to set the keypad
volume.
.
.
6. Use the Directional Key
to
Using the Internal Keypad
1. Open the flip and press
[MENU].
scroll to a setting, then press
On/Off
.
2. Press
3. Press
4. Press
Settings & Tools
Sounds Settings
Keypad Volume
.
4.3 Alert Sounds
Allows you to select the alert type for
a new message.
.
.
5. Adjust the volume with the
Directional Key then press
to save the setting.
Using the Internal Keypad
1. Open the flip and press
[MENU].
4.5 Service Alerts
Allows you to set any of the four
Alert options to either On or Off.
2. Press
3. Press
4. Press
Settings & Tools
Sounds Settings
Alert Sounds
.
.
.
Using the Internal Keypad
1. Open the flip and press
[MENU].
5. Select TXT Message/
Pic/Video/Voice Message/
Voicemail/Emergency Tone.
2. Press
3. Press
4. Press
Settings & Tools
Sounds Settings
Service Alerts
.
6. Set how you want to be alerted.
For TXT Message, Pic/Video/Voice
Message, and Voicemail choose:
.
.
5. Select an alert option.
Tone / Vibrate / Reminder
For Emergency Tone choose:
Alert / Vibrate / Off
ERI Alerts you for the current status
of cellular service.
(ERI: Enhanced Roaming Indicator)
79
SETTINGS & TOOLS
Minute Beep Alerts you at every
minute during a call.
4.7 Voice Clarity
Allows you to set the voice clarity.
Call Connect Alerts you when the
call is connected.
Using the Internal Keypad
Charge Complete Alerts you when
the battery is completely charged.
1. Open the flip and press
[MENU].
6. Use the Directional Key
scroll to a setting, then press
to
2. Press
3. Press
4. Press
Settings & Tools
Sounds Settings
Voice Clarity
.
.
On/Off
.
.
4.6 Power On/Off
5. Use the Directional Key
scroll to a setting, then press
On/Off
to
Allows you to set the phone to sound
a tone when the phone is powered
on/off.
.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Sounds Settings
Power On/Off
.
.
.
5. Select Power On/Power Off
.
6. Use the Directional Key
scroll to a setting, then press
to
On/Off
.
80
3. Press
4. Press
5. Press
Display Settings
Banner
ERI Banner
.
5. Display Settings
Provides options to customize the
phone’s display screen.
.
.
5.1 Banner
Allows you to enter text to display on
the inner LCD and outside LCD.
6. Use the Directional Key
scroll to a setting, then press
On/Off
to
.
5.2 Backlight
5.1.1 Personal Banner
Allows you to set the duration for
illuminating the backlight. Screens
and Keypad are set separately.
Using the Internal Keypad
1. Open the flip and press
[MENU].
Using the Internal Keypad
2. Press
3. Press
4. Press
5. Press
Settings & Tools
Display Settings
Banner
Personal Banner
.
1. Open the flip and press
[MENU].
.
2. Press
3. Press
4. Press
Settings & Tools
Display Settings
Backlight
.
.
.
.
.
6. Enter up to 23 characters for the
banner text you want to display on
the inside LCD, then press
save it.
5. Choose a Backlight submenu and
to
press
Display/Keypad.
1. Display
5.1.2 ERI Banner
G
Internal Backlight: 7 Seconds/15
Seconds/30 Seconds/Always
On/Always Off
If you use ERI Service, ERI Text is
shown on the sub banner.
G
External Backlight: 7 Seconds/
15 Seconds/30 Seconds
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
Settings & Tools.
81
SETTINGS & TOOLS
2. Keypad: 7 Seconds/15 Seconds/30
Seconds/Always On/Always Off
7. Select from available screens
then press
.
TIP
5.4 Charging Screen
When the phone's internal backlight is set to
Always On, the battery may deplete more quickly
and shorten battery life because it deactivates
power save mode.
Allows you to set the screen
displayed when you are charging the
battery.
5.3 Wallpaper
Using the Internal Keypad
Allows you to choose the type of
background wallpaper for the
display of the phone. The
1. Open the flip and press
[MENU].
possibilities are endless; Fun
Animations, in particular, provides
you with flash screens for your
background wallpaper, and Slide
Show allows you to select several
images to be displayed as a slide
show on the wallpaper.
2. Press
3. Press
4. Press
Settings & Tools
Display Settings
Charging Screen
.
.
.
5. Scroll to a setting and press
.
Off/Desk Clock/Calendar/Slide
Show
Using the Internal Keypad
NOTE Press the Left Soft Key
[Preview] to view the options before
setting it.
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools.
6. Select from available choices, then
press
.
Display Settings.
Wallpaper.
5. Select Internal Wallpaper/
External Wallpaper.
6. Choose a submenu and press
.
My Pictures/My Videos/Fun
Animations/Slide Show
82
5. Use the Directional Key
to
5.5 Display Themes
Allows you to choose the color and
style of the background screen.
scroll to a setting, then press
.
Tab/List/Grid
Using the Internal Keypad
1. Open the flip and press
NOTE Press the Left Soft Key
[MENU].
[Preview] to preview the selected
menu layout setting. If you change
your Main Menu Settings, the
2. Press
3. Press
4. Press
Settings & Tools.
instructions in the manual may vary.
Display Settings.
Display Themes.
5.7 Font Size On Internal
Display
Allows you to set the font size. This
5. Use the Directional Key
scroll to a setting, then press
to
.
setting is helpful for those who need
the text to display a little bit larger.
Classic/Slick Black/Wall/Wave
NOTE Press the Left Soft Key
[Preview] to preview the selected
display theme.
Using the Internal Keypad
1. Open the flip and press
[MENU].
5.6 Main Menu Settings
Allows you to set the main menu
layout.
2. Press
3. Press
4. Press
Settings & Tools.
Display Settings.
Using the Internal Keypad
Font Size On Internal
1. Open the flip and press
[MENU].
Display.
5. Use the Directional Key
scroll to Dial Digits/Menu &
Lists/Message.
to
2. Press
3. Press
4. Press
Settings & Tools.
Display Settings.
6. Press the Left Soft Key
[Set].
Main Menu Settings.
83
SETTINGS & TOOLS
7. Use the Directional Key
scroll to a setting, then press
to
6. Phone Settings
The Phone Settings Menu allows
you to designate specific settings to
customize how you use your phone.
.
Dial Digits: Small/Large
Menu & Lists: Small/Normal
Message: Normal/Large
6.1 Standalone Mode
(Airplane Mode)
5.8 Clock Format
Allows you to use the menu
functions except making calls,
Bluetooth feature, and web
Allows you to choose the kind of
clock to be displayed on the LCD
screen.
®
accessing, when radio transmission
is restricted. Activating Standalone
Mode will disable all wireless
communications. When in
Standalone Mode, services
supporting Location On functionality
(such as Chaperone) will be
suspended.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
5. Press
Settings & Tools.
Display Settings.
Clock Format.
Internal Clock or
Using the Internal Keypad
External Clock.
1. Open the flip and press
[MENU].
6. Use the Directional Key
scroll to a setting, then press
to
.
2. Press
3. Press
4. Press
Settings & Tools.
Internal Clock : Normal/Analog/
Digital/Dual(Set City in World
Clock)/Off
Phone Settings.
Standalone Mode.
External Clock : Digital 1/Digital
2/Normal/Off
5. Use the Directional Key
scroll to a setting, then press
On/Off.
to
NOTE Press the Left Soft Key
[Preview] to preview the selected
clock format.
84
6.2.2 Set Internal Directional Keys
6.2 Set Shortcuts
To access and use these shortcuts,
from Standby mode press the
Directional Key in the designated
direction.
Allows you to set a shortcut to
phone menus using the down, up,
left and right Directional Keys.
6.2.1 Set My Shortcuts
1. Open the flip and press
[MENU].
To access and use My Shortcuts,
from Standby mode press the
2. Press
3. Press
4. Press
5. Press
Settings & Tools.
Directional Key
.
Phone Settings.
Set Shortcuts.
Set Internal
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
5. Press
Settings & Tools.
Directional Keys.
Phone Settings.
6. Use the Directional Key
scroll to a shortcut key you want
to set.
to
Set Shortcuts.
Set My Shortcuts.
6. Use the Directional Key
scroll to a shortcut key you want
to set and press
to
Up Directional key/Left
Directional key/Down
Directional key
.
Shortcut 1/Shortcut 2/Shortcut
3/Shortcut 4
7. Set the menu you want to be
accessed by the selected
Directional Key.
7. Use the Directional Key
to
scroll to the new shortcut, then
press
.
85
SETTINGS & TOOLS
®
6.2.3 Set Qwerty Shortcut
10 seconds.
Call Alert Ring Only/Caller ID +
Ring/Name Repeat
Allows you to begin typing and the
phone goes right to text messaging
mode or notepad mode.
6.4 Language
Allows you to set the language
mode (English or Spanish)
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
5. Press
Settings & Tools.
according to your preference.
Phone Settings.
Set Shortcuts.
Using the Internal Keypad
1. Open the flip and press
[MENU].
Set Qwerty Shortcut.
6. Use the Directional Key
scroll to one of the following and
press
to
2. Press
3. Press
4. Press
Settings & Tools.
:
Phone Settings.
Off/TXT Message/Notepad
Language.
5. Use the Directional Key
scroll to a setting, then press
to
6.3 Voice Commands
.
Using the Internal Keypad
English/Español
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools.
Phone Settings.
Voice Commands.
Prompts Mode/Audio Playback/
Timeout
For Mode, set Prompts/Readout +
Alerts/ Readout/Tones Only.
For Audio Playback, set
Speakerphone or Earpiece.
For Timeout, set 5 seconds or
86
6.5 Location
6.6 Security
Allows you to set GPS (Global
Positioning System: Satellite
assisted location information
system) mode.
The Security menu allows you to
secure the phone electronically.
Using the Internal Keypad
Using the Internal Keypad
1. Open the flip and press
[MENU].
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Security
.
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Location
.
.
.
.
.
5. Enter the four-digit lock code.
The lock code is the last 4 digits of
your mobile phone number if it is
set. The lock code is the last 4
digits of your MEID if your mobile
phone number is not set.
5. Use the Directional Key
scroll to a setting, then press
to
.
Location On/E911 Only
NOTES
•
GPS satellite signals are not always received
by the phone under bad atmospheric and
environmental conditions, indoors, etc.
When a location lock mode is activated in the
Security Menu, the lock code is required to
access the location menu. The lock code is
the same 4 digits you use as your device lock
code; initially the last 4 digits of your phone
number.
6.6.1 Edit Codes
Allows you to enter a new four-digit
lock code.
•
Using the Internal Keypad
1. Open the flip and press
[MENU].
•
When in Standalone Mode, services supporting
Location On functionality (such as Chaperone)
will be suspended.
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Security
.
.
.
5. Enter the four-digit lock code.
87
SETTINGS & TOOLS
6. Press
Edit Codes
.
9. Use the Directional Key
set the restriction then press
Location Setting Lock Setting/
Unlock Setting
Calls Incoming Calls/Outgoing
Calls
to
.
7. Select Phone Only or Calls &
Services.
8. Enter your new lock code, then
enter it again to confirm.
Messages Incoming Messages/
Outgoing Messages
Dial-up Modem Allow All/
Block All
6.6.2 Restrictions
Allows you to set separate restrictions
for Location Setting, Calls, Messages,
and Dial-up Modem.
6.6.3 Phone Lock
Using the Internal Keypad
Keeps your phone from unauthorized
use. Once the phone is locked, it's in
restricted mode until the lock code is
entered. You can receive phone calls
and still make emergency calls. You
can modify the lock code using the Edit
Codes submenu within the Security
menu.
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Security
.
.
.
5. Enter the four-digit lock code.
6. Press Restrictions
.
Using the Internal Keypad
7. Enter the four-digit PIN code.
1. Open the flip and press
[MENU].
8. Scroll to a Restrictions submenu
then press
.
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Security
.
Location Setting/Calls/
Messages/Dial-up Modem
.
.
5. Enter the four-digit lock code.
6. Press Phone Lock
.
88
7. Scroll to an option then press
.
7. Press
after reading the
warning message.
Unlocked The phone is not locked
(Lock mode can be used).
On Power Up The phone locks
when it is turned on.
8. Press
to select Revert.
A confirmation message is
displayed briefly before the phone
resets itself.
6.6.4 Lock Phone Now
6.6.6 Restore Phone
Using the Internal Keypad
Allows you to erase all user data and
Contact information you've entered in
the phone's memory so it's as if it just
left the factory.
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Security
.
.
Using the Internal Keypad
.
1. Open the flip and press
[MENU].
5. Enter the four-digit lock code.
6. Press Lock Phone Now
.
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Security
.
.
6.6.5 Reset Default
Allows you to reset your phone to the
factory default settings.
.
5. Enter the four-digit lock code.
Using the Internal Keypad
6. Press
Restore Phone
.
1. Open the flip and press
[MENU].
7. Press
warning message.
8. Enter the four-digit lock code.
after reading the
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Security
.
.
.
5. Enter the four-digit lock code.
6. Press
.
89
SETTINGS & TOOLS
5. Use the Directional Key
scroll to a setting, then press
to
6.7 System Select
.
Allows you to set up the phone
management environment. Leave
this setting as the default unless you
want to alter system selection as
instructed by your service provider.
NAM1/NAM2
6.9 Auto NAM
Allows the phone to automatically
switch between programmed
telephone numbers corresponding to
the service provider area.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
System Select
.
Using the Internal Keypad
.
1. Open the flip and press
[MENU].
.
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
Auto NAM
.
5. Use the Directional Key
scroll to a setting, then press
to
.
.
Home Only/Automatic
.
5. Use the Directional Key
scroll to a setting, then press
On/Off
to
6.8 NAM Select
Allows you to select the phone’s NAM
(Number Assignment Module) if the
phone is registered with multiple
service providers.
.
Using the Internal Keypad
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Phone Settings
NAM Select
.
.
.
90
7.2 End Call Options
7. Call Settings
The Call Settings Menu allows you
to designate how the phone handles
both incoming and outgoing calls.
Allows you to determine how the
phone will disconnect a call.
Using the Internal Keypad
7.1 Answer Options
Allows you to determine how the
phone will answer an incoming call.
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Call Settings
End Call Options.
.
.
Using the Internal Keypad
1. Open the flip and press
[MENU].
5. Use the Directional Key
scroll to a setting, then press
to
.
2. Press
3. Press
4. Press
Settings & Tools
Call Settings
Answer Options
.
Flip Close/End Key Only
.
.
7.3 Auto Retry
Allows you to set the length of time
the phone waits before automatically
redialing a number when the
attempted call fails.
5. Use the Directional Key
scroll to a setting, then press
to place a checkmark next to each
setting you want to activate
to
(choose as many as you want).
Using the Internal Keypad
Flip Open/Any Key/Auto with
Handsfree
1. Open the flip and press
[MENU].
NOTE Auto with Handsfree is available only
when an external device is connected
to your phone.
2. Press
3. Press
4. Press
Settings & Tools
Call Settings
Auto Retry
.
.
.
91
SETTINGS & TOOLS
5. Use the Directional Key
scroll to a setting, then press
to
2. Press
3. Press
4. Press
Settings & Tools
Call Settings
TTY Mode
.
.
.
Off/Every 10 Seconds/Every 30
Seconds/Every 60 Seconds
.
An explanation message is
displayed.
7.4 TTY Mode
Allows you to attach a TTY device
enabling you to communicate with
parties also using a TTY device. A
phone with TTY support is able to
translate typed characters to
voice. Voice can also be translated
into characters and then displayed
on the TTY.
5. Press
to continue.
6. Use the Directional Key
scroll to a setting, then press
to
.
TTY Full/TTY + Talk/TTY + Hear/
TTY Off
TTY Full:
- Users who cannot talk and hear
send and receive a text message
through TTY equipment.
Using the Internal Keypad
1. Open the flip and press
[MENU].
TTY Mode (Tele Type writer)
When making
communications with a
normal terminal
Transmission/
Receiving Mode
Menu
User
Feature
For hearing-/
verbally-
impaired
text message transmission,
text message receiving
Operator
required
TTY Full
TTY +
Talk
For hearing-
impaired
voice transmission,
text message receiving
Operator
required
able to talk
audible
TTY +
Hear
For verbally-
impaired
text message transmission,
voice receiving
Operator
required
voice transmission,
voice receiving
For regular users
TTY Off
92
a text message or send voice.
TTY + Talk:
- Users who can talk but cannot
hear receive a text message and
send voice through TTY
equipment.
7. The voice or text message from the
receiver displays on the TTY
equipment display.
7.5 One Touch Dial
TTY + Hear:
- Users who can hear but cannot
talk send a text message and
receive voice through TTY
equipment.
Allows you to initiate a speed dial
call by pressing and holding the
speed dial digit. If set to Off,
designated Speed Dial numbers will
not function.
TTY Off:
- Normal users send and receive
voice without TTY equipment.
Using the Internal Keypad
1. Open the flip and press
[MENU].
Connecting TTY Equipment to a
Terminal
2. Press
3. Press
4. Press
Settings & Tools.
1. Connect a TTY cable to TTY
connection on the terminal (TTY
connection location is the same as
a headset jack).
Call Settings.
One Touch Dial.
5. Use the Directional Key
scroll to a setting, then press
On/Off.
to
2. Enter the phone menu and set the
desired TTY mode.
3. After setting a TTY mode, check
the LCD screen of the phone for
the TTY icon.
7.6 Voice Privacy
Allows you to set the voice privacy
feature for CDMA calls. CDMA
offers inherent voice privacy. Check
with your service provider for
availability.
4. Connect the TTY equipment to the
power source and turn it on.
5. Make a phone connection to the
desired number.
6. When connection is made, use the
TTY equipment to type in and send
93
SETTINGS & TOOLS
Using the Internal Keypad
8. USB Auto Detection
Your phone automatically detects a
USB device when it is connected to
your phone for Sync Music or Sync
Data operation. If the option is set to
Ask On Plug, you are asked to confirm
whenever the connection is made.
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools.
Call Settings.
Voice Privacy.
Using the Internal Keypad
5. Use the Directional Key
scroll to a setting, then press
On/Off.
to
1. Open the flip and press
[MENU].
2. Press
3. Press
Settings & Tools
.
7.7 DTMF Tones
Allows you to set the DTMF tone
length.
USB Auto Detection
.
4. Use the Directional Key
scroll to a setting, then press
to
.
Using the Internal Keypad
Sync Music/Sync Data/Ask On
Plug
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools.
9. Memory
2
Allows you to check your enV internal
phone memory as well as the
Call Settings.
DTMF Tones.
TM
microSD external memory.
2
5. Use the Directional Key
scroll to a setting, then press
Normal/Long.
to
The enV can access the following file
types stored on the removable
TM
microSD card.
My Pictures: png, jpg, bmp, gif
My Sounds: mid, qcp (used for MMS,
cannot be set as ringtones)
My Videos: 3gp, 3g2
My Music: wma, mp3, wav, m4a
94
Using the Internal Keypad
9.1 Save Options
Allows you to select which memory
(phone or memory card) to use to
save your files.
1. Open the flip and press
[MENU].
2. Press
3. Press
4. Press
Settings & Tools
Memory
Phone Memory
.
Using the Internal Keypad
.
1. Open the flip and press
[MENU].
.
5. Scroll to Memory Usage/My
Pictures/My Videos/My Music/
2. Press
3. Press
4. Press
Settings & Tools
Memory
Save Options
.
.
My Sounds then press
.
.
9.3 Card Memory
Shows the memory information saved
in the card.
5. Scroll to Pictures/Videos/Sounds
then press
.
6. Scroll to Phone Memory/Card
Memory then press
Using the Internal Keypad
.
1. Open the flip and press
[MENU].
9.2 Phone Memory
Shows the memory information saved
in your phone.
2. Press
3. Press
Settings & Tools
.
Memory
.
Store on
microSD Card
Transfer Phone to Transfer PC to
2
Store on enV
PC via Card
Phone via Card
V CAST Music/WMA Songs
W
W
W
W
Ringtones
W
Sound
W
W
W
W
V CAST Video Clips
W
Downloaded Picture/Video
W
Picture/Video
(User-generated or received
W
W
W
W
via MMS)
95
SETTINGS & TOOLS
4. Press
Card Memory.
0.2 SW/HW Version
Allows you to view the versions of
various applications such as SW, PRL,
ERI, Browser, Media Center, AVR,
MMS, Bluetooth , MSUI, HW, MEID
Version, and Warranty Date Code.
5. Scroll to Memory Usage/My
Pictures/My Videos/My Music/
My Sounds then press
.
®
NOTE The option Card Memory Usage
shows the total used memory and
memory space remaining.
Using the Internal Keypad
1. Open the flip and press
[MENU].
0. Phone Info
Allows you to view the information
specific to your phone and
software.
2. Press
3. Press
4. Press
Settings & Tools
Phone Info
SW/HW Version
.
.
.
Using the Internal Keypad
1. Open the flip and press
[MENU].
0.3 Icon Glossary
Allows you to view all the icons and
their meanings.
2. Press
3. Press
Settings & Tools
.
Phone Info
.
Using the Internal Keypad
1. Open the flip and press
[MENU].
0.1 My Number
Allows you to view your phone
number.
2. Press
3. Press
4. Press
Settings & Tools
Phone Info
Icon Glossary
.
.
1. Open the flip and press
[MENU].
.
2. Press
3. Press
4. Press
Settings & Tools
Phone Info
My Number
.
.
.
96
Manual Update
0.4 Software Update
1. Open the flip and press
[MENU].
This feature gives your phone the
ability to upgrade to the latest
software and keeps your phone
operating with the latest features
without visiting a Verizon Wireless
Communications Store for the
upgrade. You can either be notified
automatically that there is an
updated version of software
available for your phone, or you can
manually check to see if there are
any updates available for you to
download.
2. Press
3. Press
4. Press
Settings & Tools
Phone Info
Software Update
.
.
.
The two options shown will be
Status and Check New.
Press
Status to see the status
of a download or update and see
information on the last successful
update. If updates have not yet
been performed, status information
will be unavailable.
Automatic Update
Your phone will receive a
Or press
Check New to check
notification that there is an updated
version of software available to be
downloaded. You can press
when notified that a download is
available or it can happen
automatically. Once the download is
complete you may, depending on
the nature of the update, have three
options available: Accept the
update, Defer the update, or Reject
the update.
if any new software updates are
available to download. If a newer
software version is available, it will
automatically begin downloading
after 30 seconds or you can begin
the download immediately by
pressing
. To stop the software
download press the right soft key
Quit.
NOTE During the update you cannot make or
receive phone calls, including 911
calls, or text messages.
97
Safety
Those standards were based on
comprehensive and periodic
evaluations of the relevant
TIA Saafety
Informmation
scientific literature. For example,
over 120 scientists, engineers, and
physicians from universities,
government health agencies, and
industry reviewed the available
body of research to develop the
ANSI Standard (C95.1).
The design of your phone
complies with the FCC
guidelines (and those
standards).
The following is the complete TIA
Safety Information for wireless
handheld phones.
Exposure to Radio Frequency
Signal
Your wireless handheld portable
phone is a low power radio
transmitter and receiver. When ON,
it receives and sends out Radio
Frequency (RF) signals.
In August, 1996, the Federal
Communications Commissions
(FCC) adopted RF exposure
guidelines with safety levels for
handheld wireless phones. Those
guidelines are consistent with the
safety standards previously set by
both U.S. and international
Antenna Care
Use only the supplied or an
approved replacement antenna.
Unauthorized antennas,
modifications, or attachments could
damage the phone and may violate
FCC regulations.
standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
* American National Standards
Institute; National Council on
Radiation Protection and
Phone Operation
NORMAL POSITION: Hold the
phone as you would any other
telephone with the antenna pointed
up and over your shoulder.
Measurements; International
Commission on Non-Ionizing
Radiation Protection
98
Tips on Efficient Operation
against the RF signals from your
wireless phone.
For your phone to operate most
efficiently:
Don’t touch the antenna
Pacemakers
The Health Industry Manufacturers
Association recommends that a
minimum separation of six (6)
inches be maintained between a
handheld wireless phone and a
pacemaker to avoid potential
unnecessarily when the phone is in
use. Contact with the antenna
affects call quality and may cause
the phone to operate at a higher
power level than otherwise needed.
Driving
interference with the pacemaker.
These recommendations are
consistent with the independent
research by and recommendations
of Wireless Technology Research.
Check the laws and regulations on
the use of wireless phones in the
areas where you drive and always
obey them. Also, if using your
phone while driving, please observe
the following:
Persons with pacemakers:
G
Should ALWAYS keep the phone
G
more than six (6) inches from
their pacemaker when the phone
is turned ON;
Give full attention to driving --
driving safely is your first
responsibility;
G
G
Should not carry the phone in a
breast pocket;
Use hands-free operation, if
available;
G
G
Should use the ear opposite the
Pull off the road and park before
pacemaker to minimize the
potential for interference;
making or answering a call if
driving conditions or the law
require it.
G
Should turn the phone OFF
immediately if there is any
reason to suspect that
Electronic Devices
interference is taking place.
Most modern electronic equipment
is shielded from RF signals.
However, certain electronic
equipment may not be shielded
99
Safety
Hearing Aids
also consult the manufacturer of
any equipment that has been added
to your vehicle.
Some digital wireless phones may
interfere with some hearing aids. In
the event of such interference, you
may want to consult your service
provider (or call the customer
Aircraft
FCC regulations prohibit using your
phone while in the air. Switch OFF
your phone before boarding an
aircraft.
service line to discuss alternatives).
Other Medical Devices and Health
Care Facilities
Blasting Areas
If you use any other personal
medical device, consult the
manufacturer of your device to
determine if it is adequately
shielded from the external RF
energy. Your physician may be able
to assist you in obtaining this
information.
Turn your phone OFF in health care
facilities when any regulations
posted in these areas instruct you
to do so. Hospitals or health care
facilities may use equipment that
could be sensitive to the external
RF energy.
To avoid interfering with blasting
operations, turn your phone OFF
when in a “blasting area” or in
areas posted: “Turn off two-way
radio”. Obey all signs and
instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any
area with a potentially explosive
atmosphere and obey all signs and
instructions. Sparks in such areas
could cause an explosion or fire
resulting in bodily injury or even
death.
Areas with a potentially explosive
atmosphere are often, but not
always marked clearly. Potential
areas may include: fueling areas
(such as gasoline stations); below
deck on boats; fuel or chemical
transfer or storage facilities;
Vehicles
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor
vehicles. Check with the
manufacturer or its representative
regarding your vehicle. You should
100
vehicles using liquefied petroleum
gas (such as propane or butane);
areas where the air contains
chemicals or particles (such as
grain, dust, or metal powders); and
any other area where you would
normally be advised to turn off your
vehicle engine.
Safetty Infformation
Please read and observe the
following information for safe and
proper use of your phone and to
prevent damage. Also, keep the
user guide in an accessible place at
all times after reading it.
Violation of the
instructions may
cause minor or serious damage to
the product.
For Vehicles Equipped with an Air
Bag
An air bag inflates with great force.
DO NOT place objects, including
either installed or portable wireless
equipment, in the area over the air
bag or in the air bag deployment
area. If in-vehicle wireless
equipment is improperly installed
and the air bag inflates, serious
injury could result.
G
Do not disassemble or open
crush, bend or deform, puncture
or shred.
G
Do not modify or remanufacture,
attempt to insert foreign objects
into the battery, immerse or
expose to water or other liquids,
expose to fire, explosion or other
hazard.
G
Only use the battery for the
system for which it is specified.
G
Only use the battery with a
charging system that has been
qualified with the system per
IEEE-Std-1725-2006. Use of an
unqualified battery or charger
may present a risk of fire,
explosion, leakage, or other
hazard.
101
Safety
G
Do not short circuit a battery or
allow metallic conductive objects
to contact battery terminals.
Battery Information and Care
G
Please dispose of your battery
properly or take it to your local
wireless carrier for recycling.
G
G
Battery usage by children should
be supervised.
G
The battery doesn’t need to be
Avoid dropping the phone or
battery. If the phone or battery is
dropped, especially on a hard
surface, and the user suspects
damage, take it to a service
center for inspection.
empty before recharging.
G
Use only LG-approved chargers
specific to your phone model
since they are designed to
maximize battery life.
G
Do not disassemble or short-
G
Improper battery use may result
in a fire, explosion or other
hazard.
circuit the battery.
G
Keep the battery’s metal contacts
clean.
Charger and Adapter Safety
G
Replace the battery when it no
longer provides acceptable
performance. The battery can be
recharged several hundred times
before replacement.
G
The charger and adapter are
intended for indoor use only.
G
Insert the battery pack charger
vertically into the wall power
socket.
G
Recharge the battery after long
periods of non-use to maximize
battery life.
G
Only use the approved battery
charger. Otherwise, you may
cause serious damage to your
phone.
G
Battery life will vary due to usage
patterns and environmental
conditions.
G
Use the correct adapter for your
phone when using the battery
pack charger abroad.
G
Use of extended backlighting,
Browser, and data connectivity
kits affect battery life and talk/
standby times.
G
The self-protection function of
the battery cuts the power of the
102
phone when its operation is in an
abnormal state. In this case,
remove the battery from the
phone, reinstall it, and turn the
phone on.
(metal strips on the battery) upon
moving. Short-circuit of the
terminal may damage the battery
and cause an explosion.
General Notice
Explosion, Shock, and Fire Hazards
G
Using a damaged battery or
placing a battery in your mouth
may cause serious injury.
G
Do not put your phone in a place
subject to excessive dust and
keep the minimum required
distance between the power
cord and heat sources.
G
Do not place items containing
magnetic components such as a
credit card, phone card, bank
book, or subway ticket near your
phone. The magnetism of the
phone may damage the data
stored in the magnetic strip.
G
Unplug the power cord prior to
cleaning your phone, and clean
the power plug pin when it’s dirty.
G
When using the power plug,
G
ensure that it’s firmly connected.
If not, it may cause excessive
heat or fire.
Talking on your phone for a long
period of time may reduce call
quality due to heat generated
during use.
G
If you put your phone in a pocket
G
or bag without covering the
receptacle of the phone (power
plug pin), metallic articles (such
as a coin, paperclip or pen) may
short-circuit the phone. Always
cover the receptacle when not in
use.
When the phone is not used for a
long period time, store it in a safe
place with the power cord
unplugged.
G
Using the phone in proximity to
receiving equipment (i.e., TV or
radio) may cause interference to
the phone.
G
Don’t short-circuit the battery.
Metallic articles such as a coin,
paperclip or pen in your pocket
or bag may short-circuit the +
and – terminals of the battery
G
Do not use the phone if the
antenna is damaged. If a
damaged antenna contacts skin,
it may cause a slight burn. Please
103
Safety
contact an LG Authorized
Service Center to replace the
damaged antenna.
Caution:
Avoid pootential
hearinng loss.
G
Do not immerse your phone in
water. If this happens, turn it off
immediately and remove the
battery. If the phone does not
work, take it to an LG Authorized
Service Center.
Prolonged exposure to loud sounds
(including music) is the most
common cause of preventable
hearing loss. Some scientific
research suggests that using
portable audio devices, such as
portable music players and cellular
telephones, at high volume settings
for long durations may lead to
permanent noise induced hearing
loss. This includes the use of
headphones (including headsets,
earbuds and Bluetooth or other
wireless devices). Exposure to very
loud sound has also been
associated in some studies with
tinnitus (a ringing in the ear),
hypersensitivity to sound and
distorted hearing. Individual
susceptibility to noise-induced
hearing loss and other potential
hearing problems varies.
The amount of sound produced by
a portable audio device varies
depending on the nature of the
sound, the device, the device
settings and the headphones. You
should follow some commonsense
recommendations when using any
G
G
Do not paint your phone.
The data saved in your phone
might be deleted due to careless
use, repair of the phone, or
upgrade of the software. Please
backup your important phone
numbers. (Ringtones, text
messages, voice messages,
pictures, and videos could also
be deleted.) The manufacturer is
not liable for damage due to the
loss of data.
®
G
When you use the phone in
public places, set the ringtone to
vibration so you don't disturb
others.
G
G
Do not turn your phone on or off
when putting it to your ear.
Use accessories, such as
earphones and headsets, with
caution. Ensure that cables are
tucked away safely and do not
touch the antenna unnecessarily.
104
G
portable audio device:
Do not listen at any volume that
causes you discomfort. If you
experience ringing in your ears,
hear muffled speech or
experience any temporary
hearing difficulty after listening
to your portable audio device,
discontinue use and consult your
doctor.
G
Set the volume in a quiet
environment and select the
lowest volume at which you can
hear adequately.
G
When using headphones, turn
the volume down if you cannot
hear the people speaking near
you or if the person sitting next
to you can hear what you are
listening to.
You can obtain additional
information on this subject from the
following sources:
G
Do not turn the volume up to
block out noisy surroundings. If
you choose to listen to your
portable device in a noisy
environment, use noise-
cancelling headphones to block
out background environmental
noise.
American Academy of Audiology
11730 Plaza American Drive, Suite
300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: www.audiology.org
National Institute on Deafness and
Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD USA 20892-2320
Voice: (301) 496-7243
G
Limit the amount of time you
listen. As the volume increases,
less time is required before your
hearing could be affected.
G
Avoid using headphones after
exposure to extremely loud
noises, such as rock concerts,
that might cause temporary
hearing loss. Temporary hearing
loss might cause unsafe volumes
to sound normal.
Email: [email protected]
Internet:
http://www.nidcd.nih.gov/health/he
aring
105
Safety
National Institute for Occupational
Safety and Health
FDA Connsumer
Update
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-
4674)
The U.S. Food and Drug
Administration’s Center
for Devices and
Radiological Health Consumer
Update on Mobile Phones:
Internet:
1. Do wireless phones pose a
health hazard?
http://www.cdc.gov/niosh/topics/no
ise/default.html
The available scientific evidence
does not show that any health
problems are associated with using
wireless phones. There is no proof,
however, that wireless phones are
absolutely safe. Wireless phones
emit low levels of Radio Frequency
(RF) energy in the microwave range
while being used. They also emit
very low levels of RF when in
standby mode. Whereas high levels
of RF can produce health effects
(by heating tissue), exposure to low
level RF that does not produce
heating effects causes no known
adverse health effects. Many
studies of low level RF exposures
have not found any biological
effects. Some studies have
suggested that some biological
effects may occur, but such
findings have not been confirmed
by additional research. In some
106
G
G
cases, other researchers have had
difficulty in reproducing those
studies, or in determining the
reasons for inconsistent results.
Design wireless phones in a way
that minimizes any RF exposure
to the user that is not necessary
for device function; and
2. What is the FDA's role
concerning the safety of wireless
phones?
Cooperate in providing users of
wireless phones with the best
possible information on possible
effects of wireless phone use on
human health.
Under the law, the FDA does not
review the safety of radiation-
emitting consumer products such
as wireless phones before they can
be sold, as it does with new drugs
or medical devices. However, the
agency has authority to take action
if wireless phones are shown to
emit Radio Frequency (RF) energy
at a level that is hazardous to the
user. In such a case, the FDA could
require the manufacturers of
wireless phones to notify users of
the health hazard and to repair,
replace, or recall the phones so
that the hazard no longer exists.
Although the existing scientific data
does not justify FDA regulatory
actions, the FDA has urged the
wireless phone industry to take a
number of steps, including the
following:
The FDA belongs to an interagency
working group of the federal
agencies that have responsibility
for different aspects of RF safety to
ensure coordinated efforts at the
federal level. The following
agencies belong to this working
group:
G
National Institute for
Occupational Safety and Health
G
Environmental Protection
Agency
G
Occupational Safety and Health
Administration
G
National Telecommunications
and Information Administration
The National Institutes of Health
participates in some interagency
working group activities, as well.
The FDA shares regulatory
responsibilities for wireless phones
with the Federal Communications
Commission (FCC). All phones that
G
Support needed research into
possible biological effects of RF
of the type emitted by wireless
phones;
107
Safety
are sold in the United States must
comply with FCC safety guidelines
that limit RF exposure. The FCC
relies on the FDA and other health
agencies for safety questions about
wireless phones.
The FCC also regulates the base
stations that the wireless phone
networks rely upon. While these
base stations operate at higher
power than do the wireless phones
themselves, the RF exposures that
people get from these base stations
are typically thousands of times
lower than those they can get from
wireless phones. Base stations are
thus not the subject of the safety
questions discussed in this
developed with the advice of the
FDA and other federal health and
safety agencies. When the phone is
located at greater distances from
the user, the exposure to RF is
drastically lower because a
person's RF exposure decreases
rapidly with increasing distance
from the source. The so-called
“cordless phones,” which have a
base unit connected to the
telephone wiring in a house,
typically operate at far lower power
levels, and thus produce RF
exposures far below the FCC safety
limits.
4. What are the results of the
research done already?
document.
The research done thus far has
produced conflicting results, and
many studies have suffered from
flaws in their research methods.
Animal experiments investigating
the effects of Radio Frequency (RF)
energy exposures characteristic of
wireless phones have yielded
conflicting results that often cannot
be repeated in other laboratories. A
few animal studies, however, have
suggested that low levels of RF
could accelerate the development
of cancer in laboratory animals.
However, many of the studies that
3. What kinds of phones are the
subject of this update?
The term “wireless phone” refers
here to handheld wireless phones
with built-in antennas, often called
“cell”, “mobile”, or “PCS” phones.
These types of wireless phones can
expose the user to measurable
Radio Frequency (RF) energy
because of the short distance
between the phone and the user’s
head.
These RF exposures are limited by
FCC safety guidelines that were
108
showed increased tumor
5. What research is needed to
decide whether RF exposure from
wireless phones poses a health
risk?
development used animals that had
been genetically engineered or
treated with cancer-causing
chemicals so as to be pre-disposed
to develop cancer in the absence of
RF exposure. Other studies exposed
the animals to RF for up to 22 hours
per day. These conditions are not
similar to the conditions under
which people use wireless phones,
so we do not know with certainty
what the results of such studies
mean for human health. Three large
epidemiology studies have been
published since December 2000.
Between them, the studies
A combination of laboratory studies
and epidemiological studies of
people actually using wireless
phones would provide some of the
data that are needed. Lifetime
animal exposure studies could be
completed in a few years. However,
very large numbers of animals
would be needed to provide reliable
proof of a cancer promoting effect,
if one exists. Epidemiological
studies can provide data that is
directly applicable to human
investigated any possible
populations, but ten or more years
follow-up may be needed to provide
answers about some health effects,
such as cancer. This is because the
interval between the time of
exposure to a cancer-causing
agent and the time tumors develop
— if they do — may be many, many
years. The interpretation of
association between the use of
wireless phones and primary brain
cancer, glioma, meningioma, or
acoustic neuroma, tumors of the
brain or salivary gland, leukemia, or
other cancers. None of the studies
demonstrated the existence of any
harmful health effects from
wireless phone RF exposures.
However, none of the studies can
answer questions about long-term
exposures, since the average
period of phone use in these
epidemiological studies is
hampered by difficulties in
measuring actual RF exposure
during day-to-day use of wireless
phones. Many factors affect this
measurement, such as the angle at
which the phone is held, or which
model of phone is used.
studies was around three years.
109
Safety
6. What is the FDA doing to find out
more about the possible health
effects of wireless phone RF?
from experts in government,
industry, and academic
organizations. CTIA-funded
research is conducted through
contracts with independent
investigators. The initial research
will include both laboratory studies
and studies of wireless phone
users. The CRADA will also include
a broad assessment of additional
research needs in the context of
the latest research developments
around the world.
The FDA is working with the U.S.
National Toxicology Program and
with groups of investigators around
the world to ensure that high
priority animal studies are
conducted to address important
questions about the effects of
exposure to Radio Frequency (RF)
energy.
The FDA has been a leading
participant in the World Health
Organization International Electro
Magnetic Fields (EMF) Project
since its inception in 1996. An
influential result of this work has
been the development of a detailed
agenda of research needs that has
driven the establishment of new
research programs around the
world. The project has also helped
develop a series of public
information documents on EMF
issues.
The FDA and the Cellular
Telecommunications & Internet
Association (CTIA) have a formal
Cooperative Research And
Development Agreement (CRADA)
to do research on wireless phone
safety. The FDA provides the
scientific oversight, obtaining input
7. How can I find out how much
Radio Frequency energy exposure I
can get by using my wireless
phone?
All phones sold in the United States
must comply with Federal
Communications Commission (FCC)
guidelines that limit Radio
Frequency (RF) energy exposures.
The FCC established these
guidelines in consultation with the
FDA and the other federal health
and safety agencies. The FCC limit
for RF exposure from wireless
phones is set at a Specific
Absorption Rate (SAR) of 1.6 watts
per kilogram (1.6 W/kg). The FCC
limit is consistent with the safety
standards developed by the
Institute of Electrical and Electronic
110
Engineering (IEEE) and the National
Council on Radiation Protection and
Measurement. The exposure limit
takes into consideration the body’s
ability to remove heat from the
tissues that absorb energy from the
wireless phone and is set well
below levels known to have effects.
Manufacturers of wireless phones
must report the RF exposure level
for each model of phone to the FCC.
The FCC website
(http://www.fcc.gov/oet/rfsafety)
gives directions for locating the FCC
identification number on your
phone so you can find your phone’s
RF exposure level in the online
listing.
Specific Absorption Rate (SAR) in
the Human Body Due to Wireless
Communications Devices:
Experimental Techniques”, sets
forth the first consistent test
methodology for measuring the rate
at which RF is deposited in the
heads of wireless phone users. The
test method uses a tissue-
simulating model of the human
head. Standardized SAR test
methodology is expected to greatly
improve the consistency of
measurements made at different
laboratories on the same phone.
SAR is the measurement of the
amount of energy absorbed in
tissue, either by the whole body or
a small part of the body. It is
measured in watts/kg (or
8. What has the FDA done to
measure the Radio Frequency
energy coming from wireless
phones?
milliwatts/g) of matter. This
measurement is used to determine
whether a wireless phone complies
with safety guidelines.
The Institute of Electrical and
Electronic Engineers (IEEE) is
developing a technical standard for
measuring the Radio Frequency
(RF) energy exposure from wireless
phones and other wireless
9. What steps can I take to reduce
my exposure to Radio Frequency
energy from my wireless phone?
If there is a risk from these
handsets with the participation and
leadership of FDA scientists and
engineers. The standard,
“Recommended Practice for
Determining the Spatial-Peak
products — and at this point we do
not know that there is — it is
probably very small. But if you are
concerned about avoiding even
potential risks, you can take a few
111
Safety
simple steps to minimize your
Frequency (RF) energy, the
exposure to Radio Frequency (RF)
energy. Since time is a key factor in
how much exposure a person
receives, reducing the amount of
time spent using a wireless phone
will reduce RF exposure. If you
must conduct extended
measures described above would
apply to children and teenagers
using wireless phones. Reducing
the time of wireless phone use and
increasing the distance between
the user and the RF source will
reduce RF exposure.
conversations by wireless phone
every day, you could place more
distance between your body and
the source of the RF, since the
exposure level drops off
Some groups sponsored by other
national governments have advised
that children be discouraged from
using wireless phones at all. For
example, the government in the
United Kingdom distributed leaflets
containing such a recommendation
in December 2000. They noted that
no evidence exists that using a
wireless phone causes brain
tumors or other ill effects. Their
recommendation to limit wireless
phone use by children was strictly
precautionary; it was not based on
scientific evidence that any health
hazard exists.
dramatically with distance. For
example, you could use a headset
and carry the wireless phone away
from your body or use a wireless
phone connected to a remote
antenna. Again, the scientific data
does not demonstrate that wireless
phones are harmful. But if you are
concerned about the RF exposure
from these products, you can use
measures like those described
above to reduce your RF exposure
from wireless phone use.
11. What about wireless phone
interference with medical
equipment?
10. What about children using
wireless phones?
Radio Frequency (RF) energy from
wireless phones can interact with
some electronic devices. For this
reason, the FDA helped develop a
detailed test method to measure
Electro Magnetic Interference
The scientific evidence does not
show a danger to users of wireless
phones, including children and
teenagers. If you want to take steps
to lower exposure to Radio
112
(EMI) of implanted cardiac
interference be found to occur, the
FDA will conduct testing to assess
the interference and work to
resolve the problem.
pacemakers and defibrillators from
wireless telephones. This test
method is now part of a standard
sponsored by the Association for
the Advancement of Medical
Instrumentation (AAMI). The final
draft, a joint effort by the FDA,
medical device manufacturers, and
many other groups, was completed
in late 2000. This standard will allow
manufacturers to ensure that
cardiac pacemakers and
defibrillators are safe from wireless
phone EMI.
The FDA has tested hearing aids for
interference from handheld
wireless phones and helped
develop a voluntary standard
sponsored by the Institute of
Electrical and Electronic Engineers
(IEEE). This standard specifies test
methods and performance
12. Where can I find additional
information?
For additional information, please
refer to the following resources:
FDA web page on wireless phones
(http://www.fda.gov/cellphones/)
Federal Communications
Commission (FCC) RF Safety
Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-
lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO)
International EMF Project
(http://www.who.int/emf)
requirements for hearing aids and
wireless phones so that no
National Radiological Protection
Board (UK)
interference occurs when a person
uses a “compatible” phone and a
“compatible” hearing aid at the
same time. This standard was
approved by the IEEE in 2000.
The FDA continues to monitor the
use of wireless phones for possible
interactions with other medical
devices. Should harmful
(http://www.nrpb.org.uk/)
113
Safety
mounted device for your
wireless phone or a speaker
phone accessory, take
advantage of these devices if
available to you.
10 Driver SSafettyy Tips
Your wireless phone gives you the
powerful ability to communicate by
voice almost anywhere, anytime.
An important responsibility
accompanies the benefits of
wireless phones, one that every
user must uphold.
When operating a car, driving is
your first responsibility. When using
your wireless phone behind the
wheel of a car, practice good
common sense and remember the
following tips:
3. Make sure you place your
wireless phone within easy
reach and where you can reach
it without removing your eyes
from the road. If you get an
incoming call at an inconvenient
time, if possible, let your
voicemail answer it for you.
4. Suspend conversations during
hazardous driving conditions or
situations. Let the person you are
speaking with know you are
driving; if necessary, suspend
the call in heavy traffic or
1. Get to know your wireless phone
and its features such as speed
dial and redial. Carefully read
your instruction manual and
learn to take advantage of
hazardous weather conditions.
Rain, sleet, snow, and ice can be
hazardous, but so is heavy
traffic. As a driver, your first
responsibility is to pay attention
to the road.
valuable features most phones
offer, including automatic redial
and memory. Also, work to
memorize the phone keypad so
you can use the speed dial
function without taking your
attention off the road.
5. Don’t take notes or look up
phone numbers while driving. If
you are reading an address book
or business card, or writing a
“to-do” list while driving a car,
you are not watching where you
2. When available, use a hands-
free device. A number of hands-
free wireless phone accessories
are readily available today.
Whether you choose an installed
114
are going. It is common sense.
Do not get caught in a
dangerous situation because you
are reading or writing and not
paying attention to the road or
nearby vehicles.
8. Use your wireless phone to call
for help. Your wireless phone is
one of the greatest tools you can
own to protect yourself and your
family in dangerous situations --
with your phone at your side,
help is only three numbers away.
Dial 911 or other local
emergency number in the case
of fire, traffic accident, road
hazard, or medical emergency.
Remember, it’s a free call on your
wireless phone!
6. Dial sensibly and assess the
traffic; if possible, place calls
when you are not moving or
before pulling into traffic. Try to
plan your calls before you begin
your trip or attempt to coincide
your calls with times you may be
stopped at a stop sign, red light,
or otherwise stationary. But if
you need to dial while driving,
follow this simple tip -- dial only a
few numbers, check the road
and your mirrors, then continue.
9. Use your wireless phone to help
others in emergencies. Your
wireless phone provides you a
perfect opportunity to be a
“Good Samaritan” in your
community. If you see an auto
accident, crime in progress or
other serious emergency where
lives are in danger, call 911 or
other local emergency number,
as you would want others to do
for you.
7. Do not engage in stressful or
emotional conversations that
may be distracting. Stressful or
emotional conversations and
driving do not mix; they are
distracting and even dangerous
when you are behind the wheel
of a car. Make people you are
talking with aware you are
driving and if necessary,
10. Call roadside assistance or a
special wireless non-emergency
assistance number when
necessary. Certain situations you
encounter while driving may
require attention, but are not
suspend conversations which
have the potential to divert your
attention from the road.
115
Safety
urgent enough to merit a call for
emergency services. But you
can still use your wireless
phone to lend a hand. If you see
a broken-down vehicle posing
no serious hazard, a broken
traffic signal, a minor traffic
accident where no one appears
injured or a vehicle you know to
be stolen, call roadside
Consumer
Informattion oon SAR
(Specific Absorption Rate)
This Model Phone Meets the
Government’s Requirements for
Exposure to Radio Waves. Your
wireless phone is a radio
transmitter and receiver. It is
designed and manufactured not to
exceed the emission limits for
exposure to radiofrequency (RF)
energy set by the Federal
assistance or other special non-
emergency wireless number.
Communications Commission (FCC)
of the U.S. Government. These FCC
exposure limits are derived from the
recommendations of two expert
organizations, the National Counsel
on Radiation Protection and
The above tips are meant as
general guidelines. Before deciding
to use your mobile device while
operating a vehicle, it is
recommended that you consult
your applicable jurisdiction’s local
laws or other regulations regarding
such use. Such laws or other
regulations may prohibit or
Measurement (NCRP) and the
Institute of Electrical and
Electronics Engineers (IEEE). In
both cases, the recommendations
were developed by scientific and
engineering experts drawn from
industry, government, and
otherwise restrict the manner in
which a driver may use his or her
phone while operating a vehicle.
academia after extensive reviews
of the scientific literature related to
the biological effects of RF energy.
The exposure limit for wireless
mobile phones employs a unit of
measurement known as the
Specific Absorption Rate, or SAR.
The SAR is a measure of the rate of
116
absorption of RF energy by the
human body expressed in units of
watts per kilogram (W/kg). The FCC
requires wireless phones to comply
with a safety limit of 1.6 watts per
kilogram (1.6 W/kg). The FCC
exposure limit incorporates a
substantial margin of safety to give
additional protection to the public
and to account for any variations in
measurements.
exposure. The tests are performed
in positions and locations (e.g., at
the ear and worn on the body) as
required by the FCC for each model.
This device was tested for typical
body-worn operations with the
back of the phone kept 0.79 inches
(2.0 cm) between the user’s body
and the back of the phone. To
comply with FCC RF exposure
requirements, a minimum
Tests for SAR are conducted using
standard operating positions
separation distance of 0.79 inches
(2.0 cm) must be maintained
specified by the FCC with the phone
transmitting at its highest certified
power level in all tested frequency
bands. Although SAR is determined
at the highest certified power level,
the actual SAR level of the phone
while operating can be well below
the maximum value. Because the
phone is designed to operate at
multiple power levels to use only
the power required to reach the
network, in general, the closer you
are to a wireless base station
antenna, the lower the power
output.
between the user s body and the
back of the phone. Third-party belt-
clips, holsters, and similar
accessories containing metallic
components should not be used.
Body-worn accessories that cannot
maintain 0.79 inches (2.0 cm)
separation distance between the
user's body and the back of the
phone, and have not been tested
for typical body-worn operations
may not comply with FCC RF
exposure limits and should be
avoided.
The FCC has granted an Equipment
Authorization for this model phone
with all reported SAR levels
Before a phone model is available
for sale to the public, it must be
tested and certified to the FCC that
it does not exceed the limit
evaluated as in compliance with the
FCC RF emission guidelines.
established by the government-
adopted requirement for safe
The highest SAR value for this
model phone when tested for use at
117
Safety
the ear is 1.34 W/kg and when worn
on the body, as described in this
user’s manual, is 1.27 W/kg. While
there may be differences between
SAR levels of various phones and at
various positions, they all meet the
government requirement for safe
exposure.
SAR information on this model
phone is on file with the FCC and
can be found under the Display
Grant section of
*In the United States and Canada,
the SAR limit for mobile phones
used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of
tissue. The standard incorporates a
substantial margin of safety to give
additional protection for the public
and to account for any variations in
measurements.
FCC Hearring-Aid
Compatibiilityy ((HAC)
Regulattions for
http://www.fcc.gov/oet/fccid after
searching on FCC ID.
To find information that pertains to a
particular model phone, this site
uses the phone FCC ID number
which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to
remove the battery pack to find the
number. Once you have the FCC ID
number for a particular phone,
follow the instructions on the
website and it should provide
values for typical or maximum SAR
for a particular phone.
Wirelesss Devices
On July 10, 2003, the U.S. Federal
Communications Commission (FCC)
Report and Order in WT Docket 01-
309 modified the exception of
wireless phones under the Hearing
Aid Compatibility Act of 1988 (HAC
Act) to require digital wireless
phones be compatible with hearing-
aids. The intent of the HAC Act is to
ensure reasonable access to
telecommunications services for
persons with hearing disabilities.
While some wireless phones are
used near some hearing devices
(hearing aids and cochlear
Additional information on Specific
Absorption Rates (SAR) can be
found on the Cellular
Telecommunications Industry
Association (CTIA) website at
http://www.ctia.org/
implants), users may detect a
buzzing, humming, or whining noise.
Some hearing devices are more
118
immune than others to this
device is relatively immune to
interference noise. The hearing aid
and wireless phone rating values
are then added together. A sum of 5
is considered acceptable for
normal use. A sum of 6 is
interference noise, and phones also
vary in the amount of interference
they generate.
The wireless telephone industry
has developed a rating system for
wireless phones, to assist hearing
device users to find phones that
may be compatible with their
hearing devices. Not all phones
have been rated. Phones that are
rated have the rating on their box or
a label located on the box.
considered for best use.
The ratings are not guarantees.
Results will vary depending on the
user's hearing device and hearing
loss. If your hearing device
In the above example, if a hearing
aid meets the M2 level rating and
the wireless phone meets the M3
level rating, the sum of the two
values equal M5. This should
provide the hearing aid user with
“normal usage” while using their
hearing aid with the particular
wireless phone. “Normal usage” in
this context is defined as a signal
quality that’s acceptable for normal
operation.
happens to be vulnerable to
interference, you may not be able to
use a rated phone successfully.
Trying out the phone with your
hearing device is the best way to
evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4
meet FCC requirements and are
likely to generate less interference
to hearing devices than phones that
are not labeled. M4 is the
better/higher of the two ratings.
Hearing devices may also be rated.
Your hearing device manufacturer
or hearing health professional may
help you find this rating. Higher
ratings mean that the hearing
The M mark is intended to be
synonymous with the U mark. The T
mark is intended to be synonymous
with the UT mark. The M and T
marks are recommended by the
Alliance for Telecommunications
119
Safety
Industries Solutions (ATIS). The U
and UT marks are referenced in
Section 20.19 of the FCC Rules. The
HAC rating and measurement
procedure are described in the
American National Standards
Institute (ANSI) C63.19 standard.
When you're talking over the cell
phone, it's recommended you'd turn
the BT (Bluetooth) mode off for
HAC.
For information about hearing aids
and digital wireless phones
FCC Hearing Aid Compatibility and
Volume Control
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC
http://tap.gallaudet.edu/DigWireless.KS/
DigWireless.htm
HLAA (Hearing Loss Association of
America)
http://www.hearingloss.org/learn/cellph
onetech.asp
The Hearing Aid Compatibility FCC
Order
http://hraunfoss.fcc.gov/edocs_public/at
tachmatch/FCC-03-168A1.pdf
120
Accessories
There are a variety of accessories available for your phone and three easy
ways to purchase them: shop online anytime at www.verizonwireless.com,
call us at 1866 VZ GOT IT (894 6848) or visit one of our Verizon Wireless
Communication Stores.
Chargers
Batteries
USB Cable
Holster
Sync CD
121
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY
COVERS:
and, therefore, shall not be
covered under these limited
warranty terms.
LG offers you a limited warranty
that the enclosed subscriber unit
and its enclosed accessories will
be free from defects in material and
workmanship, according to the
following terms and conditions:
(5)Upon request from LG, the
consumer must provide
information to reasonably prove
the date of purchase.
(6)The customer shall bear the cost
of shipping the product to the
Customer Service Department of
LG. LG shall bear the cost of
shipping the product back to the
consumer after the completion of
service under this limited
(1)The limited warranty for the
product extends for TWELVE (12)
MONTHS beginning on the date
of purchase of the product with
valid proof of purchase, or
absent valid proof of purchase,
FIFTEEN (15) MONTHS from date
of manufacture as determined by
the unit's manufacture date
code.
warranty.
2. WHAT THIS WARRANTY DOES
NOT COVER:
(2)The limited warranty extends
only to the original purchaser of
the product and is not assignable
or transferable to any
(1)Defects or damages resulting
from use of the product in other
than its normal and customary
manner.
subsequent purchaser/end user.
(2)Defects or damages from
abnormal use, abnormal
conditions, improper storage,
exposure to moisture or
(3)This warranty is good only to the
original purchaser of the product
during the warranty period as
long as it is in the U.S., including
Alaska, Hawaii, U.S. Territories
and Canada.
dampness, unauthorized
modifications, unauthorized
connections, unauthorized
repair, misuse, neglect, abuse,
accident, alteration, improper
installation, or other acts which
(4)The external housing and
cosmetic parts shall be free of
defects at the time of shipment
122
are not the fault of LG, including
damage caused by shipping,
blown fuses, spills of food or
liquid.
(9) Products operated outside
published maximum ratings.
(10) Products used or obtained in a
rental program.
(3)Breakage or damage to
antennas unless caused directly
by defects in material or
workmanship.
(11) Consumables (such as fuses).
3. WHAT LG WILL DO:
LG will, at its sole option, either
repair, replace or refund the
purchase price of any unit that does
not conform to this limited warranty.
LG may choose at its option to use
functionally equivalent re-
conditioned, refurbished or new
units or parts or any units. In
addition, LG will not re-install or
back-up any data, applications or
software that you have added to
your phone. It is therefore
(4)That the Customer Service
Department at LG was not
notified by consumer of the
alleged defect or malfunction of
the product during the applicable
limited warranty period.
(5)Products which have had the
serial number removed or made
illegible.
(6)This limited warranty is in lieu of
all other warranties, express or
implied either in fact or by
operations of law, statutory or
otherwise, including, but not
limited to any implied warranty of
marketability or fitness for a
particular use.
recommended that you back-up
any such data or information prior
to sending the unit to LG to avoid
the permanent loss of such
information.
4. STATE LAW RIGHTS:
(7)Damage resulting from use of
non LG approved accessories.
No other express warranty is
applicable to this product. THE
DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE
IMPLIED WARRANTY OF
(8)All plastic surfaces and all other
externally exposed parts that are
scratched or damaged due to
normal customer use.
MARKETABILITY, IS LIMITED TO
123
LIMITED WARRANTY STATEMENT
THE DURATION OF THE EXPRESS
Or visit http://us.lgservice.com.
Correspondence may also be
mailed to:
LG Electronics Service- Mobile
Handsets, P.O. Box 240007,
Huntsville, AL 35824
WARRANTY HEREIN. LG SHALL
NOT BE LIABLE FOR THE LOSS OF
THE USE OF THE PRODUCT,
INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR
CONSEQUENTIAL, ARISING OUT
OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY
BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING
THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO
THIS PRODUCT.
DO NOT RETURN YOUR PRODUCT
TO THE ABOVE ADDRESS. Please
call or write for the location of the
LG authorized service center
nearest you and for the procedures
for obtaining warranty claims.
Some states do not allow the
exclusive limitation of incidental or
consequential damages or
limitations on how long an implied
warranty lasts; so these limitations
or exclusions may not apply to you.
This warranty gives you specific
legal rights and you may also have
other rights which vary from state
to state.
5. HOW TO GET WARRANTY
SERVICE:
To obtain warranty service, please
call or fax to the following
telephone numbers from anywhere
in the continental United States:
Tel. 1-800-793-8896 or Fax. 1-800-
448-4026
124
Glossary
SM
V CAST
Terminnology
Feature that is the next generation in
wireless technology which transforms
your wireless phone into a portable
music player and delivers an amazing
streaming mobile video experience.
V CAST uses technology that
Ez Tip Calculator
Feature for easy bill calculation using the
total cost, tip, and number of people as
variables.
significantly increases download
capabilities to deliver better graphics,
sound and depth and uses the power of
broadband so that you can download the
hottest entertainment, sports highlights,
news and breaking weather to your
Verizon Wireless V CAST phone. The
new V CAST phones provide better
imaging capabilities, mega pixel
Advanced Voice Recognition
Feature that allows you to perform a
wide range of verbal commands by
training the phone to recognize your
individual speech patterns.
®
Bluetooth wireless technology
Technology used to allow mobile phones,
computers, and other personal devices
to be easily coordinated and
cameras and video cameras, improved
audio and expandable memory storage.
interconnected using a short-range
wireless connection.
Acronyyms and
Abbreviiations
Media Center
DTMF
Feature that accesses the Internet to
provide the ability to access and even
download a wide variety of software,
information, music, video, and more right
on your LG Verizon wireless phone.
Dual-Tone Multi Frequency (or “touch-
tone”) is a method used to communicate
keys pressed on the phone. Pressing a
key generates two simultaneous tones,
one for the row and one for the column
to determine which key was pressed.
TM
microSD
Additional external memory for your
mobile phone.
125
Glossary
ERI
NAM
Enhanced Roaming Indicator is a
Number Assignment Module is how the
phone stores the phone number and its
electronic serial number.
feature to indicate whether a mobile
phone is on its home system, a partner
network, or a roaming network. Many
phones indicate home vs. roaming as an
icon, but ERI capable phones can clearly
indicate third “partner network” status.
SSL
Secure Sockets Layer Protocol used to
encrypt data sent over the air.
EVDO
TTY
Evolution Data Only or Evolution Data
Optimized (abbreviated as EVDO, EV-DO,
EvDO, 1xEV-DO or 1xEvDO) provides fast
wireless broadband access (3G)
anywhere, without needing a WiFi
hotspot.
Teletypewriter. An electromechanical
typewriter that either transmits or
receives messages coded in electrical
signals. A phone with TTY support is able
to translate typed characters to voice or
translate voice into characters to display
on the TTY.
GPS
Global Positioning System is a system of
satellites, computers, and receivers able
to determine the latitude and longitude of
a specific receiver on Earth. Position is
calculated using time and distance.
IS 2000
Type of digital signaling. It's the second
generation of CDMA digital cellular, an
extension of IS-95. Differences between
signaling types have to do with pilot
signal and links to provide more traffic
channels, and control protocols.
126
Index
10 Driver Safety Tips 114
D
K
Keypad Volume 79
A
L
LIMITED WARRANTY
STATEMENT 122
E
M
Master Volume 78
B
Ez Tip Calculator 69
F
Battery Temperature
FCC Hearing-Aid
Compatibility (HAC)
Regulations for Wireless
Menu Tree on the Internal
Font Size On Internal
Mobile Web 61
C
G
Call Waiting 22
My Name Card 48
My Pictures 57
I
Important Safety
In Case of Emergency (ICE)
Consumer Information on
My Videos 58
N
CONTACTS 45
Inbox 36
127
MEMO
MEMO
|