Kyocera VM1450 User Manual

TABLE OF CONTENTS  
CHAPTER 1. GETTING STARTED  
INSTALLING THE BATTERY...............................................................................................................................8  
REMOVING THE BATTERY ...............................................................................................................................9  
CHARGING THE BATTERY..............................................................................................................................10  
POWER CONNECTION........................................................................................................................................................10  
BLOCKING ANTENNA WHILE MAKING A CALL .............................................................................................11  
CORRECT/INCORRECT FINGER POSITION ..........................................................................................................................11  
ACTIVATING YOUR VIRGIN MOBILE ACCOUNT.............................................................................................12  
FINDING YOUR PHONE’S SERIAL NUMBER...................................................................................................13  
PROGRAMMING YOUR PHONE.....................................................................................................................14  
GETTING TO KNOW YOUR PHONE ................................................................................................................15  
TURNING THE PHONE ON ..................................................................................................................................................19  
TURNING THE PHONE OFF .................................................................................................................................................19  
MY PHONE NUMBER .........................................................................................................................................................20  
TTY.....................................................................................................................................................................................20  
PHONE INFO ......................................................................................................................................................................21  
NAVIGATING THROUGH MENUS...................................................................................................................23  
CHAPTER 2. MY ACCOUNT  
MY ACCOUNT ...............................................................................................................................................28  
TOP-UP WITH A TOP-UP CARD ...........................................................................................................................................28  
TOP-UP WITH A DEBIT CARD, CREDIT CARD, OR PAYPAL ACCOUNT ..................................................................................29  
CHAPTER 3. MAKING AND RECEIVING CALLS  
MAKING AND RECEIVING CALLS..................................................................................................................32  
MAKING A CALL ................................................................................................................................................................32  
ANSWERING CALLS............................................................................................................................................................32  
SPEAKERPHONE.................................................................................................................................................................33  
HARD/ 2 SECOND PAUSE FEATURE....................................................................................................................................33  
CALLER ID FUNCTION........................................................................................................................................................33  
CALL WAITING FUNCTION.................................................................................................................................................34  
ADJUSTING VOLUME..........................................................................................................................................................34  
SPEED DIALING..................................................................................................................................................................34  
RECENT CALLS LIST-RECENT CALLS...................................................................................................................................35  
RECENT CALLS LIST-INCOMING CALLS..............................................................................................................................36  
1
TABLE OF CONTENTS  
VIRGIN ALERTS...................................................................................................................................................................61  
SENT ..................................................................................................................................................................................62  
SAVED................................................................................................................................................................................62  
VOICEMAIL.........................................................................................................................................................................63  
ERASE MSGS......................................................................................................................................................................63  
MSG SETTINGS ..................................................................................................................................................................64  
CHAPTER 7. MY STUFF  
MY STUFF .....................................................................................................................................................70  
MY RINGTONES .................................................................................................................................................................70  
MY GRAPHICS....................................................................................................................................................................70  
MY GAMES ........................................................................................................................................................................71  
MY OTHER STUFF...............................................................................................................................................................72  
MY SOUNDS ......................................................................................................................................................................72  
CHAPTER 8. VIRGINXL  
VIRGINXL......................................................................................................................................................74  
CHAPTER 9. PICTURES  
PICTURES......................................................................................................................................................76  
TAKE A PICTURE.................................................................................................................................................................76  
SEND A PICTURE MESSAGE ...............................................................................................................................................77  
MY PICTURES.....................................................................................................................................................................77  
CAMERA SETTINGS............................................................................................................................................................78  
HELP ..................................................................................................................................................................................79  
CHAPTER 10. CUSTOMIZING YOUR PHONE  
CUSTOMIZING YOUR PHONE........................................................................................................................82  
SOUND...............................................................................................................................................................................82  
DISPLAY .............................................................................................................................................................................93  
MESSAGING.......................................................................................................................................................................97  
BLUETOOTH .....................................................................................................................................................................100  
SECURITY.........................................................................................................................................................................103  
LOCATION........................................................................................................................................................................108  
CALL SETTINGS................................................................................................................................................................109  
OTHERS............................................................................................................................................................................110  
3
TABLE OF CONTENTS  
CHAPTER 11. USING TOOLS  
USING TOOLS..............................................................................................................................................116  
VOICE...............................................................................................................................................................................116  
TIP CALCULATOR..............................................................................................................................................................117  
CALCULATOR ...................................................................................................................................................................118  
ALARM CLOCK.................................................................................................................................................................118  
SCHEDULER .....................................................................................................................................................................119  
MEMO PAD......................................................................................................................................................................120  
STOPWATCH ....................................................................................................................................................................120  
WORLD CLOCK.................................................................................................................................................................121  
MEMORY MANAGER .......................................................................................................................................................121  
CHAPTER 12. WARRANTY  
WARRANTY.................................................................................................................................................124  
MANUFACTURER’S WARRANTY.......................................................................................................................................124  
CHAPTER 13. SAFETY  
SAFETY........................................................................................................................................................128  
SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES...........................................................................................128  
SAFETY INFORMATION FOR FCC RF EXPOSURE ..............................................................................................................130  
SAR INFORMATION..........................................................................................................................................................131  
FDA CONSUMER UPDATE ................................................................................................................................................132  
EMERGENCY CALLS....................................................................................................................................................... 138  
COMPLIANCE WITH OTHER FCC REGULATIONS...............................................................................................................139  
GENERAL SAFETY ............................................................................................................................................................140  
ANTENNA.........................................................................................................................................................................140  
BATTERY ..........................................................................................................................................................................141  
ADAPTER/CHARGER.........................................................................................................................................................142  
RECYCLE YOUR CELL PHONE!..........................................................................................................................................143  
FCC HEARING-AID COMPATIBILITY (HAC) REGULATIONS FOR WIRELESS DEVICES.........................................................144  
FCC COMPLIANCE INFORMATION...................................................................................................................................146  
4
NAVIGATING THROUGH CHAPTER  
CHAPTER  
INFORMATION  
1. GETTING STARTED  
This chapter provides important information about using your phone including:  
Installing the Battery  
Charging the Battery  
Activating Your Virgin Mobile Account  
Finding your Serial Number  
Programming Your Phone  
Getting to Know Your Phone  
Navigating through Menus  
Caring for the Battery  
2. MY ACCOUNT  
Manage your Virgin Mobile account directly from your phone.  
3. MAKING AND  
RECEIVING CALLS  
Phone's basic functions including menus, volume levels, and call features.  
Making and Receiving Calls  
During a Call  
4. ENTERING LETTERS,  
NUMBERS, SYMBOLS  
This chapter provides entering letters, numbers, symbols.  
5. STORING CONTACTS  
Numerous functions including saving phone numbers to the internal  
phonebook.  
6. MESSAGING  
7. MY STUFF  
8. VIRGINXL  
9. PICTURES  
Checking voice mail messages, as well as sending and receiving message.  
Access ringtones, games, graphics and sounds.  
Download games, ringtones, graphics and applications.  
Take a picture and send picture message.  
10. CUSTOMIZING YOUR  
PHONE  
Customizes your cellular telephone and optimizes performance through a  
variety of settings.  
11. USING TOOLS  
This section shows you how to use features that can help you keep up with your  
contacts, schedules and appointments.  
5
NAVIGATING THROUGH CHAPTER  
12. WARRANTY  
13. SAFETY  
This chapter contains the terms and conditions of services and the warranty for  
your cellular telephone.  
Read this important safety information before using your phone.  
6
CHAPTER 1 GETTING STARTED  
CHAPTER 1  
GETTING STARTED  
This chapter provides important information about  
using your phone including:  
Installing the Battery  
Remove the Battery  
Charging the Battery  
Activating Your Virgin Mobile Account  
Finding your Serial Number  
Programming Your Phone  
Getting to Know Your Phone  
Navigating through Menus  
Caring for the Battery  
7
INSTALLING THE BATTERY  
1. Place the battery (label side up) on the back of the phone so the metal contacts match up on  
the battery and in the battery cavity.  
2. Push the battery down into the battery cavity until it locks into place.  
3. Place the battery cover over the battery and snap it into place.  
8
REMOVING THE BATTERY  
1. Make sure your phone is turned off.  
2. Hold the phone face down.  
3. Push up on the latch on the back of the phone and pull the back cover off.  
4. If necessary, remove the battery by pulling up on the bottom edge of the battery.  
Battery  
Talk Time  
Standby Time  
900 mAh Lithium Ion  
Up to 270 min  
Up to 230 hours  
9
CHARGING THE BATTERY  
POWER CONNECTION  
1. Plug the AC Charger into a standard outlet.  
2. Plug the other end of the AC Charger into your phone. Make sure the battery is securely in  
place.  
• When you charge the battery with the phone power off, you will see a charging status screen.  
You cannot operate the phone until it is powered on.  
• The battery is not charged at the time of purchase.  
Tip  
• Fully charge the battery before use.  
• It is more efficient to charge the battery with the handset powered off.  
• The battery must be connected to the phone in order to charge it.  
• Battery operating time gradually decreases over time.  
• If the battery fails to perform normally, you may need to replace the battery.  
10  
BLOCKING ANTENNA WHILE MAKING A CALL  
CORRECT/INCORRECT FINGER POSITION  
INCORRECT FINGER POSITION  
CORRECT FINGER POSITION  
11  
ACTIVATING YOUR VIRGIN MOBILE ACCOUNT  
Before you can start talking, messaging, or downloading, you need to activate service with Virgin  
Mobile. You need your phone’s serial number to activate your Virgin Mobile account. (Please see  
next page on how to find your serial #) Activate your account online by going to  
www.virginmobileusa.com and clicking on Activate. Or call Virgin Mobile at 1-888-322-1122.  
12  
FINDING YOUR PHONE’S SERIAL NUMBER  
1. Press  
[Menu], then press  
"Settings". Press  
"Handset info".  
2. Press  
"My mobile number".  
3. The serial number is under the letters MEID. It has 18 digits.  
13  
PROGRAMMING YOUR PHONE  
Once your account is active, you’ll receive your Virgin Mobile phone number. When you are ready,  
follow these steps to program it into your phone:  
1. Turn on your phone and wait for it to power up.  
2. Dial ##VIRGIN# (that’s #-#-8-4-7-4-4-6-#)  
3. You are now in the Programming menu. Scroll down to Activate Phone” and hit “OK".  
4. Your screen will say, “Do you want to activate your phone now ?” Select “Yes”.  
5. Your phone will connect to the network, and then the screen will say "Hi. Press Start to  
continue the activation process". Scroll down to "Start" and hit "OK".  
6. Your phone will say "We're getting your phone number for you," then your phone will display  
your new Virgin Mobile phone number. Write it down.  
7. Scroll down to "Finish" and hit "OK" to complete the activation process. Your phone will turn  
off and back on by itself.  
• That’s it – It might take a couple of hours to get you set up on our network, but we’ll send a text  
message to your phone to let you know you can start talking. Also, it may take up to 4  
hours for VirginXL, voicemail, and Top-Up features to come online. But we bet you’ll find  
us worth the wait. Enjoy!  
14  
GETTING TO KNOW YOUR PHONE  
Your Super Slice phone weighs 2.5 ounces. The dimensions are 4.4” X 1.9” X .4”.  
Earpiece  
Color Display  
Right Option Button  
Left Option Button  
SEND Key  
Back Key  
Navigation and OK Key  
END/POWER Key  
Microphone  
Camera  
Charging port  
Earjack  
Volume Keys  
15  
GETTING TO KNOW YOUR PHONE  
NAVIGATION KEY  
In Idle Mode : Press  
for My Account,  
for Send Text Msg,  
for Recent Calls and  
for Virgin XL.  
Within a Menu : Within a menu, use to scroll through menu options, or to select a function displayed on the  
screen.  
On a Call : Press  
to activate speakerphone mode.  
Send Key  
Press to make or receive a call or in idle mode, press to access the Recent Calls list.  
End Key  
Press to terminate a call or to return to idle mode. Press and hold to turn the phone on/off.  
Left Option Button  
Press to access the menu or function displayed at the bottom left of the screen.  
Right Option Button  
Press to access the menu or function displayed at the bottom right of the screen.  
BACK Key  
Press to clear a digit or press and hold to clear all digits from the display. Press to return to the previous page.  
Shift Key  
Enters the asterisk [ ] character for calling features. Press and hold to enter Keyguard mode.  
*
Space Key  
In text entry mode, press to accept the word and add a space.  
0 Key  
In T9 Mode, press to see other word choices.  
1 Key  
Press and hold to access voicemail.  
OK Key  
Press to access the Menu.  
Side Volume Key  
Allows you to adjust the ringtone volume in standby mode or adjust the voice volume during a call.  
The volume key can also be used to scroll up or down to navigate through the different menu options.  
Press to ignore an incoming call and mute the ringtone.  
16  
GETTING TO KNOW YOUR PHONE  
The idle mode display appears when you are not on a call or using the menu. You must be in the  
idle mode display to dial a phone number.  
Display Indicators  
Display various icons.  
Text & Graphic area  
Option Button Indicators  
Shows the functions currently assigned to each Option Button and displays some icons.  
Signal Strength  
Current signal strength: the more lines, the stronger the signal.  
Emergency Call  
Blinks when an emergency call is in progress.  
Download  
Downloading is in progress.  
GPS Icon  
Indicates the Location Service of your phone is disabled/enabled.  
No Service  
Indicates the phone cannot receive a signal from the system.  
TTY  
Indicates your phone is in TTY mode.  
Battery  
Battery charging level — the more bars, the fuller the charge.  
Alarm  
Appears when either a calendar or an alarm is set.  
17  
GETTING TO KNOW YOUR PHONE  
Off  
Indicates the ringtone volume is set to off.  
Vibrate+Bell Mode  
Phone will vibrate and ring to notify you of an incoming call.  
Vibrate Only  
Phone will vibrate to notify you of an incoming call.  
Silence All  
All sounds, including ringtone volume, are set to off.  
Voicemail  
Indicates you have voicemail messages.  
New Text Messages  
Indicates you have text messages.  
New Voice Messages  
Indicates you have both text and voicemail messages.  
Lock  
Phone is locked.  
Charging  
Your battery is charging.  
18  
GETTING TO KNOW YOUR PHONE  
TURNING THE PHONE ON  
1. Press and hold  
until the phone powers on.  
• If “Password” appears on the display enter your 4-digit password to unlock your phone.  
• The default password is the last 4 digits of your phone number.  
Tip  
TURNING THE PHONE OFF  
1. Press and hold  
until the phone powers off.  
• Immediately change or recharge the battery when “LOW BATTERY!! PHONE IS TURNING OFF!”  
appears on thedisplay. Memory may possibly be damaged if the phone turns offdue to the  
Tip  
battery completely draining.  
• Turn the phone off before removing or replacing the battery. If the phone is on, unsaved data  
may be lost.  
Each function can be accessed by scrolling with  
with the menu item.  
or by pressing the number that corresponds  
1. To access the menu in the idle mode, press  
[Menu].  
2. Press  
3. To return to the previous page, press  
To exit the current menu and return to the idle mode, press  
to enter a function when its main page is displayed or press its assigned number to  
have direct access to the function.  
/
/
/
to scroll through the 8 menu items.  
.
.
4. Press  
19  
GETTING TO KNOW YOUR PHONE  
My Account  
Send Text Msg  
VirginXL  
Recent Calls  
MY PHONE NUMBER  
Displays your phone number.  
1. Press  
[Menu], then press  
"Contacts".  
2. Press  
"My phone number". Your phone number will be displayed.  
TTY  
Your phone is able to operate with a TTY(Teletypewriter) device. This feature is system dependent  
and may not be available in all areas.  
1. Press  
[Menu], then press  
“Others”, then press  
"Settings".  
"TTY".  
Press  
• Enabling TTY may impair headset use and non- TTY accessory performance.  
2. Press  
[Next]. Select “On” or “Off.”, then press  
[Select] to save the setting.  
20  
GETTING TO KNOW YOUR PHONE  
PHONE INFO  
Displays your phone’s information:  
MY MOBILE NUMBER  
Displays your phone number and MEID(Serial Number).  
1. Press  
[Menu], then press  
“Handset info”, then press  
"Settings".  
Press  
“My mobile number”.  
2. Your phone number and MEID(Serial Number) is displayed.  
VERSION  
Displays your phone's software versions.  
1. Press  
[Menu], then press  
“Handset info”, then press  
"Settings".  
"Version".  
Press  
2. Your phone's software version are displayed.  
ICON GLOSSARY  
Displays some of the indicator icons of your phone.  
1. Press  
[Menu], then press  
“Handset info”, then press  
"Settings".  
"Icon glossary".  
Press  
2. Your phone's indicator icons are displayed.  
21  
GETTING TO KNOW YOUR PHONE  
ADVANCED  
Displays your phone's SID, Channel, Technology and Frequency information.  
1. Press  
[Menu], then press  
“Handset info”, then press  
"Settings".  
"Advanced".  
Press  
2. Your phone's SID, Channel, Technology and Frequency information is displayed.  
22  
NAVIGATING THROUGH MENUS  
3. Send email msg  
4. Send im  
5. Inbox  
6. Virgin alerts  
7. Voicemail  
8. Saved  
MY STUFF  
1. My ringtones  
2. My graphics  
3. My games  
4. My other stuff  
5. My sounds  
9. Sent  
10. Erase msgs  
MYACCOUNT  
10.1. inbox  
10.2. sent  
10.3. saved  
PICTURES  
1. Take a picture  
2. Send pic msg  
3. My pictures  
4. Settings  
11. Msg settings  
11.1. Sound  
11.1.1. Text message  
11.1.2. Picture message  
11.1.3. Voicemail  
11.2. Reminder  
11.3. Auto text  
11.4. Text entry  
11.5. Group  
11.6. Signature  
11.7. Save to sent folder  
11.8. Auto erase  
11.9. Notification  
4.1. Resolution  
4.2. Quality  
4.3. Shutter sound  
5. Help  
5.1. Resolution  
5.2. Quality  
5.3. Picture message  
CONTACTS  
1. Find name  
2. Add new  
3. Group settings  
4. Speed dial  
5. My Phone number  
TOOLS  
1. Voice  
1.1. Voice memo  
1.2. Voice command  
2. Tip Calculator  
3. Calculator  
4. Alarm clock  
VirginXL  
MESSAGING  
1. Send Text msg  
2. Send Pic msg  
23  
NAVIGATING THROUGH MENUS  
5. Scheduler  
6. Memo pad  
7. Stopwatch  
8. World clock  
9. Memory manager  
1.3.3. Service tone  
1.3.4. Fade tone  
1.4. Tone length  
2.Display  
2.1. Graphics  
2.1.1. Wallpaper  
2.1.1.1. My graphics  
RECENT CALLS  
1. Recent calls  
2. Incoming calls  
3. Outgoing calls  
4. Missed calls  
5. Call timer  
2.1.1.2. My pictures  
2.1.2. Clock and calendar  
2.1.3. Screensaver  
2.2. Incoming calls  
2.2.1. My graphics  
2.2.2. My pictures  
2.3. Menu style  
2.4. Greeting  
2.5. Backlight  
SETTINGS  
1. Sound  
1.1. Ringer type  
1.1.1. With caller id  
1.1.2. No caller id  
1.2. Volume  
2.5.1. Display  
2.5.2. Keypad  
3. Messaging  
3.1. Sound  
1.2.1. Ringer  
1.2.2. Receiver  
1.2.3. Speakerphone  
1.2.4. Headset  
1.2.5. Key tone  
1.2.6. Applications  
1.2.7. Others  
3.1.1. Text messaging  
3.1.2. Picture messaging  
3.1.3. Voicemail  
3.2. Reminder  
3.3. Auto text  
3.4. Text entry  
3.5. Group  
3.6. Signature  
3.7. Save to sent folder  
3.8. Auto erase  
3.9. Notification  
1.2.7.1. Messaging  
1.2.7.2. Voicemail  
1.2.7.3. Alarms & scheduler  
1.2.7.4 Power on/off  
1.3. Alerts  
1.3.1. Minute minder  
1.3.2. Connect tone  
4. Bluetooth  
24  
NAVIGATING THROUGH MENUS  
4.1. My device  
4.2. Settings  
4.3. Support service  
4.4. Information  
9. Handset info  
9.1. My mobile number  
9.2. Version  
9.3. Icon glossary  
9.4. Advanced  
5. Security  
5.1. Handset lock  
5.2. Key lock  
5.3. Special number  
5.4. Change lock code  
5.5. Erase data  
5.6. Reset browser  
5.7. Default settings  
5.8. Reset handset  
6. Location  
7. Call settings  
7.1. Answer mode  
7.2. Auto answer  
8. Others  
8.1. TTY  
8.2. Abbrev. dial  
8.3. Contacts match  
8.4. Typing mode  
8.4.1. Auto-capital  
8.4.2. Auto-space  
8.4.3. My words  
8.4.4. T9 settings  
8.4.5. Help  
8.5. Voice Commands  
8.5.1. Voice recognition results  
8.5.2. Voice Calibration  
8.5.3. Prompts  
8.5.4. Number format  
25  
MEMO  
26  
CHAPTER 2 MY ACCOUNT  
CHAPTER 2  
MY ACCOUNT  
27  
MY ACCOUNT  
When you balance is low, you can Top-Up your account from your phone:  
TOP-UP WITH A TOP-UP CARD  
1. Press  
2. From the idle screen, press the Up navigation key or from the main menu, scroll to My Account  
and press  
[Menu] to select “Menu”.  
.
3. Scroll down and select the “Top-Up” link and press  
.
• You can tell it’s selected because it’s highlighted.  
4. Top-Up Card is highlighted so press  
5. Enter your account PIN (vKey) and press  
6. Scroll down to select “Login” and press  
.
.
.
7. Enter your Top-Up card’s PIN number and press  
.
8. Scroll down to select “Top-Up Now” and press  
.
9. At the confirmation screen, select “Yes” by pressing  
10. At the Approved” screen scroll to OK and press the  
.
.
11. Press  
to exit.  
28  
MY ACCOUNT  
TOP-UP WITH A DEBIT CARD, CREDIT CARD, OR PAYPAL  
ACCOUNT  
Before you can Top-Up from your phone with a debit card, credit card, or Paypal account, you need  
to register the card or Paypal account at www.virginmobileusa.com.  
1. Press  
2. From the idle screen, press the Up navigation key or from the main menu, scroll to My Account  
and press  
[Menu] to select “Menu”.  
.
3. Scroll down and select the “Top-Up” link and press  
.
• You can tell it’s selected because it’s highlighted.  
4. Scroll down and select “Credit Card” and press  
.
5. Enter your account PIN (vKey) and press  
6. Scroll down to select “Login” and press  
7. Enter the amount for Top-Up and press  
.
.
.
8. Scroll down to select “Top-Up Now” and press  
9. Your handset will validate the amount you want to Top-Up. Scroll down to select “Yes” and  
press  
10. That’s it. Your phone will announce that “You’re Topped-Up.” Press  
to exit.  
.
.
.
11. Press  
29  
MEMO  
30  
CHAPTER 3 MAKING AND RECEIVING CALLS  
CHAPTER 3  
MAKING AND  
RECEIVING CALLS  
MAKING AND RECEIVING CALLS  
DURING A CALL  
31  
MAKING AND RECEIVING CALLS  
MAKING A CALL  
1. Enter a phone number.  
To modify the phone number you have entered :  
• To erase one digit at a time, press  
Tip  
.
• To erase the entire number, press and hold  
.
2. Press  
.
• If “CALL FAILED” appears on the display or the line is busy, press  
• If you activate the AUTO RETRY function, the phone will automatically retry for the number  
of times you have selected.  
• If “Enter lock code” appears on the display enter your 4-digit password to unlock your phone.  
or  
.
Tip  
"
"
3. To end a call, press  
.
ANSWERING CALLS  
1. When your phone rings or vibrates, press  
to answer the incoming call. (Depending on  
your phone’s settings, you may also answer incoming calls by pressing any number key.)  
• To ignore incoming calls, press  
[Ignore].  
2. To end a call, press  
.
32  
MAKING AND RECEIVING CALLS  
SPEAKERPHONE  
The speakerphone feature lets you hear audio through the speaker and talk without holding the  
phone.  
1. To activate the speakerphone while on a call, press  
.
2. The phone returns to normal (Speakerphone Off) after ending a call or when the phone is  
turned off and back on.  
HARD/ 2 SECOND PAUSE FEATURE  
Pauses are used for automated systems (i.e., voicemail, calling cards). Insert a pause after a phone  
number then enter another group of numbers. The second set of numbers is dialed automatically  
after the pause. This feature is useful for dialing into systems that require a code.  
1. To insert a Hard Pause/2-second Pause, enter a phone number then press  
Select either a P Hard pause ("P" appears) or a T 2-second pause ("T" appears).  
to dial or press [options] and select “Save” to save phone number.  
[Options].  
2. Press  
CALLER ID FUNCTION  
Identifies caller by displaying their phone number. If the caller’s name and number are already  
stored in your phone book, caller’s name with the number will appear.  
33  
MAKING AND RECEIVING CALLS  
CALL WAITING FUNCTION  
Notifies you of an incoming call when you are already on a call by playing a beep tone and  
displaying the caller’s phone number.  
1. To answer another call while on the phone, press  
.
This places the first call on hold. To switch back to the first caller, press  
again.  
• Call waiting is a system dependent feature. Please contact your service provider for details.  
Tip  
ADJUSTING VOLUME  
To adjust the ringtone volume:  
1. In idle mode, press up or down. Choose from Silence All, Vibrate All, Ringer off, or Level  
1~5. You can also choose to have the phone vibrate as well when the phone rings.  
Press  
to check the box on/off for Vibrate.  
2. Press  
[Save] to save the setting.  
SPEED DIALING  
Ideal for frequently dialed numbers, this feature allows entries in your contact list to be dialed via  
the keypad with only one or two key presses.  
ONE DIGIT SPEED DIALING  
2-9 : Press and hold the corresponding memory number for more than 1 second.  
34  
MAKING AND RECEIVING CALLS  
TWO DIGIT SPEED DIALING  
10-99 : Press and release the first digit, then press and hold the second digit for more than 1 second.  
• Location 1 is reserved for voicemail. Locations 2-99 are unassigned. To assign a speed dial  
location, please see page 53.  
Tip  
RECENT CALLS LIST-RECENT CALLS  
Displays information about the 75 most recent incoming, outgoing or missed calls.  
1. To access the “Recent Calls List,” press the  
Select “Recent Calls”.  
2. To view call details, press  
or press  
[Menu], then “Recent Calls”.  
.
• Call details include date, time, and phone number.  
Tip  
3. Press  
[Options] to access “Send txt msg”, “Save”, “Prepend”, “Erase”, or “Erase all”.  
[Send msg] to send a text message.  
Or, press  
• After 75 incoming, outgoing or missed calls, the oldest call will automatically be erased from  
the history.  
Tip  
• Send txt msg: Send a text message to the contact.  
• Save: Save the phone number in your phonebook.  
• Prepend: Adds numbers to the beginning of the phone number.  
• Erase: To erase the call entry.  
• Erase All: To erase all entire all calls list.  
35  
MAKING AND RECEIVING CALLS  
RECENT CALLS LIST-INCOMING CALLS  
Displays information about the last 25 entries in the Incoming Call list. Place a call to a selected  
number by pressing  
1. To access the “Recent Calls List,” press the  
Select “Incoming Calls”.  
2. To view incoming call details, press  
[Options] to access 'Save”, “Prepend”, “Erase”, or “Erase all”. Select  
.
or press  
[Menu], then “Recent Calls”.  
.
3. Press  
[Send msg] to send a text msg or picture msg.  
• Save: Save the phone number in your phonebook.  
• Prepend: Adds numbers to the beginning of the phone number.  
• Erase: To erase an incoming call entry.  
• Erase all: To erase all entire Incoming Calls.  
36  
MAKING AND RECEIVING CALLS  
RECENT CALLS LIST-OUTGOING CALLS  
Displays information about the last 25 entries in the Outgoing Calls list. Place a call to a selected  
number by pressing  
1. To access the “Recent Calls List,” press the  
Select “Outgoing Calls”.  
2. To view outgoing call details, press  
.
or press  
[Menu], then “Recent Calls”.  
.
• Call details include date, time and phone number.  
Tip  
3. Press  
[Options] to access 'Save”, “Prepend”, “Erase”, or “Erase all”. Select  
[Send msg] to send a text msg or picture msg.  
• Save: Save the phone number in your phonebook.  
• Prepend: Adds numbers to the beginning of the phone number.  
• Erase: To erase the Outgoing Call entry.  
• Erase all: To erase all the entire Outgoing Call list.  
37  
MAKING AND RECEIVING CALLS  
RECENT CALLS LIST-MISSED CALLS  
Displays information about the last 25 entries in the Missed Cal list. Place a call to a selected  
number by pressing  
1. To access the “Recent Calls List,” press the  
Select “Missed Calls”.  
2. To view missed call details, press  
[Options] to access 'Save”, “Prepend”, “Erase”, or “Erase all”. Select  
.
or press  
[Menu], then “Recent Calls”.  
.
3. Press  
[Send msg] to send a text msg or picture msg.  
• Save: Save the phone number in your phonebook.  
• Prepend: Adds numbers to the beginning of the phone number.  
• Erase: To erase a Missed Call entry.  
• Erase all: To erase all the entire Missed Calls list.  
CALL TIMER  
Check the talk time and manages your calls within the limit you set. The four call timers include:  
Last call, All calls, Incoming calls, and Outgoing calls.  
1. To access the “Recent Calls List,” press the  
or press  
[Menu], then “Recent Calls”.  
Select  
“Call Timer”.  
2. Press  
/
to view the different timers.  
[Reset All] to Reset all call timers.  
Press  
3. To return to the previous page, press  
.
38  
MAKING AND RECEIVING CALLS  
911 FEATURE  
The 911 feature puts the phone in the Emergency Call Mode when you dial the preprogrammed  
emergency number, 911. It also operates in the Lock Mode and out of the service area.  
911 IN LOCK MODE  
The 911 call service is available even in the Lock Mode.  
1. Enter "911", then press  
.
2. The call connects.  
3. When the call ends, the phone returns to Lock Mode.  
• The 911 call is not recorded in the Recent Call list.  
Tip  
911 USING ANY AVAILABLE SYSTEM  
1. Enter "911", then press  
.
2. The call connects.  
3. The phone maintains the Emergency Mode and the phone can receive an incoming call from  
any available system. However, it can’t make a call.  
39  
DURING A CALL  
MUTE  
The caller cannot hear you or any sounds from your side but you can still hear him/her.  
1. Press  
[Mute].  
• To deactivate, press  
[Unmute].  
• The phone will automatically unmute in Emergency Call or Callback mode.  
CALL HISTORY  
Displays call information:  
1. Press  
[Options], then press  
.
FIND NAME  
To select the phone number in your internal Contact List:  
1. Press  
[Options], then press  
.
MESSAGING  
To send a text message during a call:  
1. Press  
[Options], then press  
.
40  
DURING A CALL  
BLUETOOTH  
Connect to a Bluetooth-enabled device, such as a wireless headset (sold separately):  
[Options], then press  
1. Press  
.
41  
MEMO  
42  
CHAPTER 4 ENTERING LETTERS, NUMBERS, SYMBOLS  
CHAPTER 4  
ENTERING  
LETTERS,  
NUMBERS,  
SYMBOLS  
43  
ENTERING LETTERS, NUMBERS, SYMBOLS  
You can enter letters, numbers, and symbols using several entry modes: Alphabet, Number, T9,  
Symbol, Auto Text, and Emoticon. Not all options are available for every text entry screen.  
An indicator for the current entry mode will appear in the middle of the bottom row on the display  
when you are entering letters and numbers. To select an entry mode, press the  
choose from the list on screen.  
[Options], then  
ALPHABET INPUT MODE  
Use the number keys to enter letters, numbers and symbols. Select Alphabet mode by pressing  
[Options], then select Alphabet. The Alphabet mode icon [ABC] will appear in the middle of the  
bottom of your screen.  
1. Find the key that corresponds to the letter you want to enter. Press it as many times as needed  
for the letter to appear on the screen.  
2. To enter a space, press  
3. To delete one digit, press  
. The cursor will automatically move to the next column.  
. To delete all letters, press and hold  
.
Select Alphabet mode by pressing  
[Options], then select "Alphabet".  
Tip  
When you select this mode, the Alphabet icon [Abc] appears as a visual confirmation.  
- Find the key that corresponds to the letter you want to enter.  
- Press it as many times as needed for the letter to appear on the screen.  
- To enter the name "John" in Alphabet mode:  
Press [  
Press [  
Press [  
Press [  
]
J
,
,
,
,
]
]
]
o
h
n
44  
ENTERING LETTERS, NUMBERS, SYMBOLS  
T9 INPUT MODE  
T9 mode uses a built-in dictionary to select a word based on the letters you've entered. A word can  
be entered more quickly by pressing each key once per character. Instead of typing out the entire  
word, scroll through the list of words provided and select the one you want.  
1. To select T9 mode, press  
[Options], then select T9 Words from the list.  
The T9 icon [T9w] will appear in the middle of the bottom of your screen.  
2. For each letter of the word you want, press the corresponding number key once. For example,  
to enter the word "any", press  
->  
->  
.
3. If the word doesn't match what you want, press  
to look at other word matches.  
4. When you see the word you want, press  
to accept the word and enter a space.  
To enter a compound word:  
• Enter the first part of the word then press  
Tip  
to accept it without adding a space after it.  
to accept the word.  
• Enter the last part of the word then press  
Tip  
To enter  
- Press  
- Press  
- Press  
- Press  
"
Sweetcakes  
[Options] to select T9 Word mode.  
and you will see the word "Sweet".  
to keep Sweet selected and to complete the compound word entry.  
and you will see "baker". Press  
"
in T9 mode:  
,
,
,
,
,
,
,
,
until you see  
"cakes".  
45  
ENTERING LETTERS, NUMBERS, SYMBOLS  
NUMBER MODE  
Number mode allows you to enter numbers.  
1. To select Number mode, press  
[Options] then select Number from the list.  
2. To enter a number, press the corresponding number key.  
SYMBOL MODE  
Symbol mode allows you to enter emoticon faces. (i.e smiley face, sad face)  
1. To select Symbols mode, press  
[Options] then select Symbols from the list.  
2. Select the symbol you want to enter by pressing  
/
/
/
. Then press  
.
SMILEYS  
Smileys mode allows you to enter expressions using symbols already put together.(i.e. :), :( ).  
1. To select a smiley, press  
[Options] then select Smileys.  
2. Select the smiley from the list by pressing  
/
/
/
. Then press  
.
EMOTICON  
Emoticon mode allows you to enter Smileys.  
1. To select an emoticon, press  
[Options] then select Emoticon.  
2. Select the emoticon from the list by pressing  
/
/
/
. Then press  
.
46  
ENTERING LETTERS, NUMBERS, SYMBOLS  
AUTO TEXT  
Preset Msg. allows you to use preloaded messages.  
1. To select an Preset message, press  
[Options] then select Preset Msg.  
2. Highlight a message from the list and press  
[Select].  
47  
MEMO  
48  
CHAPTER 5 STORING CONTACTS  
CHAPTER 5  
STORING  
CONTACTS  
49  
STORING CONTACTS  
1. Enter phone number, press  
[Save].  
2. Highlight "New Entry" or "Existing Entry". Press  
If "Existing Entry" is selected, your contact list is displayed. Choose the entry to add the  
number to, then press [Next]. You will then see the phone number listed above the  
number type list. Select the type then press  
to select.  
.
• You can have up to 5 numbers of the same type for one contact entry.  
3. If "New Entry" is selected, the list of phone number types will be shown appear.  
Press  
/
to choose the type of number you are adding. Press  
to select. Enter a  
name. To change the input mode, press  
[Options]. Press  
to enter information in other  
fields for the contact. Fields include “Name”, “Mobile 1”, “Mobile 2”, “E-mail”, "IM", “URL,  
“Group”, “Ringtone”, "Vibration", "Msg Alert", “Photo”, "Secret", “Memo”.  
Group: To set a group for the contact, highlight the Group Name.(Unassigned, Personal, Family,  
Business)  
Ringtone: To set a ringtone for the contact, highlight a Ringtone.  
Vibration: To set a vibration for the contact, highlight the Vibration.(Use Phone Vib, Vibration 1~6)  
Msg Alert: To set a msg alert for the contact, highlight the Msg Alert.  
Photo: To add a Photo for a contact, highlight the Photo field and press  
appear. Highlight a photo and press [Select].  
. The Photo screen will  
Secret: To set the contact to Secret, highlight Secret.(Lock, Unlock)  
Memo: To add a memo for a contact, highlight the memo field and press  
. The Memo screen will  
appear. Enter your Memo and press  
[Done].  
4. To store the entry in your contact list, press  
[Save].  
50  
STORING CONTACTS  
ADD NEW  
Adds a new entry to your phone's contact list.  
1. Press  
2. Press  
[Menu], then press  
"Add new".  
"Contacts".  
3. Fill in the fields as they are selected.  
Press to highlight a field, then press  
/
to select it.  
Phone book fields: Name/Mobile/Email/IM/URL/Group/Ringtone/Vibration/Msg Alert/Photo/Secret/  
Memo  
4. To save the entry, press  
[Save]. To return to the previous page, press  
.
51  
STORING CONTACTS  
FIND NAME  
Retrieves an entry by name and calls the primary number by simply pressing  
.
1. Press  
2. Press  
[Menu], then press  
"Find Name".  
"Contacts".  
3. The list of names in your contacts is displayed alphabetically.  
4. Enter a name or scroll through the list. If more than one contact is listed, highlight the contact  
you want.  
5. To select the contact, highlight it and press  
. The contact information is displayed.  
6. To edit the contact information, press  
[Edit]. The Edit Contact screen will appear with the  
selected contact information shown. See page 48 for Storing a Phone Number.  
7. To save the entry, press  
[Save]. To return to the previous page, press  
.
8. Highlight a field in the contact and press  
[Options] for various functions for the fields.  
9. To call the selected number, press  
.
52  
STORING CONTACTS  
GROUP SETTINGS  
Organize your contact list into groups for better management, like "Family", "Business", etc.  
ADD GROUP  
1. Press  
2. Press  
3. Press  
[Menu], then press  
"Group Settings".  
[Add].  
"Contacts".  
4. Input a new group name.  
5. Press  
[Save] to save the setting.  
CHANGE GROUP NAME  
1. Press  
2. Press  
[Menu], then press  
"Group Settings".  
"Contacts".  
3. Scroll to Group 1, Group 2, Group 3 or Group 4 through the list. Press  
[Options], then  
select “Rename” from the list.  
4. Input a new group name.  
5. Press  
[Save] to save the setting.  
53  
STORING CONTACTS  
RINGER  
1. Press  
2. Press  
[Menu], then press  
"Group Settings".  
"Contacts".  
3. Select an existing group name.  
4. Press [Options], then select “Ringtone” from the list.  
5. Select ringtone and press  
[Select].  
ERASE GROUP  
1. Press  
2. Press  
[Menu], then press  
"Group Setting".  
"Contacts".  
3. Select Group 1, Group 2, Group 3 or Group 4 a group.  
4. Press [Options], then select “Erase” from the list.  
5. “Erase?” will be displayed. Select “Yes” and press  
to erase the group.  
54  
STORING CONTACTS  
SPEED DIAL  
In idle mode, calls can be placed to numbers stored in speed dial by pressing & holding the location  
number on the key pad. For a 2-digit location number, press the first number, then press and hold  
the second number.  
1. Press  
2. Press  
[Menu], then press  
"Speed dial".  
"Contacts".  
3. To assign a phone number to a location, select the location then press  
[Assign].  
"Empty" appears if the location is available.  
Tip  
4. Highlight a name from your contact list. If the contact has more than 1 number saved, press  
/
until the correct number for the speed dial location is shown.  
5. Press  
[Done] to save the number to the speed dial location. You will see the contact name  
next to the speed dial location number in the speed dial list.  
55  
MEMO  
56  
CHAPTER 6 MESSAGING  
CHAPTER 6  
MESSAGING  
Charges apply for the use of these features.  
See www.virginmobileusa.com for pricing.  
57  
MESSAGING  
SEND A TEXT MESSAGE  
To send a new text message:  
1. Press  
[Menu], then press  
"Messaging". Press  
"Send text msg".  
[Next].  
2. Under "Send to", input the phone number or e-mail then press  
Press  
[Options] to choose from:  
• Contacts: Look up a phone number from your contact list.  
• Recent List: Look up a number from your recent message list.  
• Group: Look up a phone number from your group list.  
3. Under "Enter Msg", input your message, press  
[Options] to edit. For instructions on  
how to enter text, please see page 42.  
4. To send the message, press  
[Send].  
58  
MESSAGING  
SEND A PICTURE MESSAGE  
To send a new picture message:  
1. Press  
2. Select a picture in My pictures.  
3. Under "Send to", input the phone number or e-mail then press  
[Menu], then press  
"Messaging". Press  
"Send Pic msg".  
[Next].  
[OK].  
4. Under "Subject", press  
, input the subject then press  
5. Under "Message", press  
, input the subject your message then press  
[OK].  
Press  
to choose from:  
• Insert/Delete Picture: To insert/delete a picture in a picture message.  
• Insert/Delete Sound: To insert/delete a sound in a picture message.  
6. To send the message, press  
[Send].  
59  
MESSAGING  
SEND AN E-MAIL MESSAGE  
To send a new e-mail message:  
1. Press  
[Menu], then press  
"Messaging". Press  
"Send email msg".  
2. Select an email provider.  
If you have not downloaded an email client, you will see the message onscreen “The IM/Email Client  
must be installed before feature can be used.” Press  
desired client.  
“Install Now” to choose and download the  
3. Use your keypad to enter the required sign-in information for the selected provider, such as  
user name, email address, and password, and select Sign In.  
4. Follow the on screen instructions to read, reply to, compose, send, and manage emails in your  
account.  
SEND AN IM  
To send a new instant message:  
1. Press  
[Menu], then press  
"Messaging". Press  
"Send IM".  
2. Select an IM provider.  
If you have not downloaded an IM client, you will see the message onscreen “The IM/Email Client must  
be installed before feature can be used.” Press  
client.  
“Install Now” to choose and download the desired  
3. Use your keypad to enter the required sign-in information for the selected provider, such as  
user name and password, and select Sign In. (Your IM screen for the selected provider will be  
displayed appear.)  
60  
MESSAGING  
INBOX  
Messages you’ve received will be stored in the Inbox.  
1. Press  
2. Select a message, then press  
3. Press  
[Menu], then press  
"Messaging". Press  
"Inbox".  
. The message is displayed.  
[Option], then select one of the following options:  
Call: Place a call to the number the message was sent to.  
Forward: Send the message to another person.  
Save: Saves the message in the Saved folder.  
Save contact: Save the phone number in Contacts.  
Erase: Delete the message.  
Cancel: Cancel the message.  
VIRGIN ALERTS  
Review the Virgin Alerts you’ve received.  
[Menu], then press  
2. To select "GoTo", press  
1. Press  
"Messaging". Press  
"Virgin Alerts".  
.
61  
MESSAGING  
SENT  
The Sent folder manages sent messages.  
1. Press  
2. Select a message, then press  
3. Press  
[Menu], then press  
"Messaging". Press  
"Sent".  
. The message is displayed.  
[Option], then select one of the following options:  
Forward: Send the message to another person.  
Call: Place a call to the number the message was sent to.  
Lock/Unlock: Lock/Unlock the message.  
Compose New: Compose new message.  
Erase: Delete the message.  
Erase All: Delete the all Sent messages.  
SAVED  
Messages you’ve saved will be stored in the Saved folder.  
1. Press  
[Menu], then press  
"Messaging". Press  
"Saved".  
2. Select a message, press  
[Erase] then select “Yes.” Press  
to delete the messages from  
the saved folder.  
3. Select a message, then press  
. The message is displayed.  
4. Press  
[Options], then select one of the following options:  
Call: Place a call to the number the message was sent to.  
Forward: Send the message to another person.  
Save contact: Save the phone number in the contacts.  
Erase: Delete the message.  
62  
MESSAGING  
VOICEMAIL  
1. Press  
[Menu], then press  
"Messaging". Press  
"Voicemail".  
Call Voicemail: Place a call to the number the voicemail was sent to.  
Last Voicemail Detail: View last voicemail information.  
Clear Voicemail icon: Delete the voicemail icon.  
ERASE MSGS  
This feature allows you to erase text and picture messages.  
1. Press  
[Menu], then press  
"Messaging". Press  
"Erase msgs".  
2. Select:  
1. Inbox  
2. Sent  
3. Saved  
3. Select “Yes” and then press  
to delete the messages from the selected folder.  
63  
MESSAGING  
MSG SETTINGS  
This feature enables you to manage your messaging settings.  
SOUND  
1. Press  
2. Press  
[Menu], then press  
"Sound".  
"Messaging". Select “Msg settings” from the list.  
3. Select "Text messaging", "Picture messaging" or "Voicemail".  
4. Select "My ringtones" or "Vibration".  
My ringtones: Highlight a ringtone from the list  
.
Vibration: Highlight a vibration from the list. (Vibration 1~6)  
5. Press  
[Select] to save the setting.  
REMINDER  
1. Press  
2. Press  
[Menu], then press  
"Reminder".  
"Messaging". Select “Msg settings” from the list.  
3. Select "On" or "Off".  
64  
MESSAGING  
AUTO TEXT  
To edit the Auto text message you have saved:  
1. Press  
2. Press  
[Menu], then press  
"Auto text".  
"Messaging". Select “Msg settings” from the list.  
3. Highlight a message from the list. To add a new Quick Text message, press  
"Add new".  
to delete any  
To edit the Quick Text message you have selected, press  
characters you don't want then enter your text. Press  
to the Auto Text list.  
. Press  
[Save] to save the text and return  
4. From the Auto Text list, press  
[Options] to select one of the following:  
Send text msg  
Send pic msg  
Erase  
Erase all  
TEXT ENTRY  
Sets an Entry Mode as a default:  
1. Press  
2. Press  
[Menu], then press  
"Text entry".  
"Messaging". Select “Msg settings” from the list.  
3. Highlight "T9 Word" or "Alphabet" then press  
[Select] to save the setting.  
65  
MESSAGING  
GROUP  
To create and edit the Group:  
1. Press  
[Menu], then press  
"Messaging". Select “Msg settings" from the list.  
2. Press  
"Group". For instructions on how to create a group, please see page 51.  
SIGNATURE  
Create a signature that can be automatically inserted at the end of a text message.  
1. Press  
2. Press  
[Menu], then press  
"Signature".  
"Messaging". Select “Msg settings" from the list.  
3. Highlight “On” or “Off” then press  
[Select] to save the setting.  
SAVE TO SENT FOLDER  
Select if you want to automatically save a message after sending it.  
1. Press  
[Menu], then press  
"Messaging". Select “Msg settings" from the list.  
2. Press  
"Save to sent folder".  
3. Highlight Auto”, "Off" or “User confirmation” then press  
[Select] to save the setting.  
If you don't want to automatically save a message after sending it, select "Off".  
66  
MESSAGING  
AUTO ERASE  
Automatically erases inbox messages when new messages arrives.  
1. Press  
2. Press  
[Menu], then press  
"Auto erase".  
"Messaging". Select “Msg settings" from the list.  
3. Highlight “Yes” or “No” then press  
[Select] to save the setting. Automatically erases  
oldest inbox messages when new messages arrive.  
NOTIFICATION  
Sets a notification:  
1. Press  
2. Press  
[Menu], then press  
"Notification".  
"Messaging". Select “Msg settings" from the list.  
3. Highlight “Icon & Message” or “Icon Only” then press  
[Select] to save the setting.  
67  
MEMO  
68  
CHAPTER 7 MY STUFF  
CHAPTER 7  
MY STUFF  
69  
MY STUFF  
Anything you download from Web - games, ringtones, graphics and applications - will be stored in  
the My Stuff folder. You can access these files from My Stuff.  
MY RINGTONES  
You can download the latest ringtones right to your phone. Charges apply.  
Visit www.virginmobileusa.com for details.  
1. Press  
2. Press  
[Menu], then press  
"My ringtones".  
"My stuff".  
3. Your list of ringtones is shown. Select “1. Get more ringtones” to download any additional  
ringtones to your phone. Web will launch and you will be taken to the download menu.  
4. Download your ringtones. From the information page select "Buy".  
5. A confirmation page will notify you that the ringtone has been purchased.  
To download the ringtone, select “Download”.  
MY GRAPHICS  
You can download new graphics to your phone. Charges apply.  
Visit www.virginmobileusa.com for details.  
1. Press  
2. Press  
[Menu], then press  
"My graphics".  
"My stuff".  
3. Your graphics list will be shown. Select "1. Get more graphics" to download additional  
wallpapers & screensavers to your phone. Web will launch and you will be taken to the  
download menu.  
70  
MY STUFF  
4. Download your graphic. From the information page select "Buy".  
5. A confirmation page will notify you that the graphic has been purchased.  
To download the graphic, select “Download”.  
MY GAMES  
You can download the latest games and play them right on your phone. Charges apply.  
Visit www.virginmobileusa.com for details.  
1. Press  
2. Press  
[Menu], then press  
"My games".  
"My stuff".  
3. Your games list will be shown. Select “1. Get more games” to download additional games to  
your phone. Web will launch and you will be taken to the download menu.  
4. Download your game. From the information page select "Buy".  
5. A confirmation page will notify you that the game has been purchased.  
To download the game, select "Download".  
71  
MY STUFF  
MY OTHER STUFF  
You can download other stuff - such as applications, etc. to your phone. Charges apply.  
Visit www.virginmobileusa.com for details.  
1. Press  
2. Press  
[Menu], then press  
"My other stuff".  
"My stuff".  
3. Select “1. Get more other stuff” to download additional screensaver to your phone. Web will  
launch and you will be taken to the download menu.  
4. Download your other stuff. From the information page select "Buy".  
5. A confirmation page will notify you that the application has been purchased.  
To download the application, select "Download".  
MY SOUNDS  
You can download new sounds to your phone.  
1. Press  
2. Press  
[Menu], then press  
"My sounds".  
"My stuff".  
3. Your list of sounds will be shown.  
72  
CHAPTER 8 VIRGINXL  
CHAPTER 8  
VIRGINXL  
73  
VIRGINXL  
VirginXL is a fun collection of features which you can access directly from your phone - download  
ringtones, games, graphics, and more. Charges apply. Visit www.virginmobileusa.com for details.  
1. To access VirginXL, press  
2. To scroll down the page or through the menus, press  
3. To return to the previous page, press  
4. To exit VirginXL, press  
.
/
.
.
.
• When you select VirginXL, a session is initiated.  
• You cannot receive incoming calls when a VirginXL session is in progress.  
All incoming calls will be automatically forwarded to voicemail.  
Tip  
74  
CHAPTER 9 PICTURES  
CHAPTER 9  
PICTURES  
75  
PICTURES  
TAKE A PICTURE  
Taking pictures with your phone ’s built-in camera is as simple as choosing a subject,pointing the  
lens,and pressing a button.  
1. Press  
[Menu], then press  
"Pictures". Press  
"Take a picture".  
Camera can also be launched by holding the  
[OK] from the idle Screen.  
2. Using the phone ’s Main LCD as a viewfinder, aim the camera lens at your subject.  
Press  
• Self Timer: To select self timer 0ff, 5sec or 10 sec.  
• Fun Frame: Highlight a fun frame from the list  
[Options] to choose from:  
.
• Image Effect: To adjust the image effect from Normal, Gray, Negative, Sepia, Emboss, Sketch.  
• Mirror: Select a mirror type to use for take picture from Vertical or Horizontal.  
• Resolution: To adjust the photo size from 640x480, 320x240, 160x120 or Wallpaper.  
• Quality: To adjust the photo quality from Economy, Normal or Fine.  
• Shutter Sound: Select a sound to use for shutter.  
3. Press  
until the shutter sounds. Press  
To return to camera mode without saving the picture,press  
[My Pics] to send a picture message.  
.
Press  
[Options] to choose from:  
• Assign: To display the picture for picture caller ID,screensaver, incoming calls, wallpapers.  
• Upload to My Pix: To upload the picture you just took to the picture messaging Web site.  
• Take a Picture  
• Edit title: To edit the selected picture’s title.  
• Erase: To delete the picture you just took.  
• Erase Multi-pics: To multi delete the pictures.  
76  
PICTURES  
• Erase All: To delete the all pictures you just took.  
• Picture Info: View picture information. (File Name, Time/Data, Resolution, Picture Size, Quality,  
Assigned, Uploads.)  
SEND A PICTURE MESSAGE  
To send a picture message:  
1. Press  
2. Highlight a picture from the list then press  
3. Under "Send to", input the phone number or e-mail then press  
[Menu], then press  
"Pictures". Press  
"Send pic msg".  
[Select].  
[Next].  
4. Under "Subject", press  
5. Under "Message", press  
6. Under "Picture", press  
7. Under "Audio", press  
8. To send the message, press  
, input the subject then press  
[OK].  
, input the subject then press  
[OK].  
, select picture in My pictures then press  
[Select].  
, select Voice memo then press  
[Send].  
[Select].  
MY PICTURES  
1. Press  
2. In Review Mode, you can view all the pictures you have taken and stored.  
3. Select photo image with the Navigation Key then press to view picture.  
[Menu], then press  
"Pictures". Press  
"My Pictures".  
77  
PICTURES  
CAMERA SETTINGS  
RESOLUTION  
To adjust the size using resolution settings:  
1. Press  
2. Press  
[Menu], then press  
"Resolution".  
"Pictures". Press  
"Settings".  
3. Select “640x480”, “320x240”, “160x120” or “Wallpaper” then press  
[Select] to save  
setting.  
QUALITY  
To select the quality of the picture:  
1. Press  
2. Press  
[Menu], then press  
"Quality".  
"Pictures". Press  
"Settings".  
3. Select “Economy”, “Normal” or “Fine” then press  
[Select] to save setting.  
SHUTTER SOUND  
To select shutter sound:  
1. Press  
2. Press  
[Menu], then press  
"Shutter sound".  
"Pictures". Press  
"Settings".  
3. Select “Default”, “Shutter 1” or “Shutter 2” then press  
[Select] to save setting.  
78  
PICTURES  
HELP  
View Resolution, Quality, Picture message informations.  
RESOLUTION  
1. Press  
2. Press  
[Menu], then press  
"Resolution".  
"Pictures". Press  
.
"Help".  
"Help".  
3. To return to the previous page, press  
QUALITY  
1. Press  
2. Press  
[Menu], then press  
"Quality".  
"Pictures". Press  
3. To return to the previous page, press  
.
PICTURE MESSAGE  
1. Press  
2. Press  
[Menu], then press  
"Picture message".  
"Pictures". Press  
.
"Help".  
3. To return to the previous page, press  
79  
MEMO  
80  
CHAPTER 10 CUSTOMIZING YOUR PHONE  
CHAPTER 10  
CUSTOMIZING  
YOUR PHONE  
81  
CUSTOMIZING YOUR PHONE  
Customizes your phone and optimizes performance through a variety of settings.  
SOUND  
RINGER TYPE  
To select a ringer type for:  
Voice Calls  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Ringer type".  
Press  
2. Press  
"Voice calls".  
3. Select "With Caller ID" or "No Caller ID" then press  
.
With Caller ID: Any call from a number whose phone number is not restricted or blocked.  
No Caller ID: From restricted or blocked numbers.  
4. Select your desired ringers from the list by pressing  
highlighted, press [Play].  
/
. To hear a ringtone that is  
5. To save the selected ringtone, press  
[Select] to save the setting.  
82  
CUSTOMIZING YOUR PHONE  
VOLUME  
Control the volume for Ringtone, Speakerphone, Headset, and Advanced settings.  
Ringer  
To set ringer volume and incoming call alert options:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
"Ringer".  
3. Press  
/
to adjust the volume level. Press  
to select Vibrate when High as the volume  
level.  
The available volume settings are:  
Silence All: All sounds are off.  
Vibrate All: Phone will vibrate to alert you of incoming call or message.  
Ringtone mode: 1~5.  
• You can also adjust the ringtone volume with the side keys.  
Tip  
4. Press  
[Save] to save the setting.  
83  
CUSTOMIZING YOUR PHONE  
Receiver  
To adjust the receiver volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
"Receiver".  
3. Adjust the Receiver volume by pressing  
/
. Press  
[Save] to save the setting.  
The volume settings available are:  
Ringtone mode: 1~5.  
Speakerphone  
To adjust the speakerphone volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
"Speakerphone".  
3. Adjust the Speakerphone volume by pressing  
/
. Press  
[Save] to save the setting.  
The volume settings available are:  
Ringtone mode: 1~5.  
84  
CUSTOMIZING YOUR PHONE  
Headset  
To adjust the headset volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
"Headset".  
3. Adjust the Headset volume by pressing  
/
. Press  
[Save] to save the setting.  
The volume settings available are:  
Ringtone mode: 1~5.  
Key Tone  
To adjust the Key Tone volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
"Key tone".  
3. Adjust the Key Beep volume by pressing  
/
. Press  
[Save] to save the setting.  
The volume settings available are:  
Ringtone mode: 1~5.  
85  
CUSTOMIZING YOUR PHONE  
Applications  
To adjust the Applications volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
"Applications".  
3. Highlight "Use ringer" or "Separate" and press  
to select. If Separate is selected, press  
to highlight the volume level. Press to adjust the volume level.  
/
This setting controls the volume of the applications.  
Use ringtone vol.: Plays the application at the same volume as the voice ringtone and allows the  
side volume keys to change the application volume at the same time as the voice  
ringtone.  
Use separate vol.: Plays the application at the selected volume level. Alerts will always play at this  
level unless the ringtone volume is set to “Silence all” or “Vibrate”.  
4. Press  
[Save] to save the setting.  
5. Press  
[Help] for additional information  
86  
CUSTOMIZING YOUR PHONE  
Others  
Messaging  
To adjust the message alert volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
“Messaging”.  
Press  
2. Press  
“Others”, then press  
3. Highlight "Use ringer" or "Separate" and press  
to select. If Separate is selected, press  
to adjust the volume level.  
to highlight the volume level. Press  
/
This setting controls the volume of new text message alerts.  
Use ringer vol.: Plays the text message alerts at the same volume as the voice ringtone and allows  
the side volume keys to change the text message alert volume at the same time as  
the voice ringtone.  
Separate vol.: Plays the text message alerts at the selected volume level. Alerts will always play at  
this level unless the ringtone volume is set to “Silence all” or “Vibrate”.  
Always vibrate: Select to this causes the application to add vibration to any sound. Only works with  
when “Separate” is selected.  
4. Press  
5. Press  
[Save] to save the setting.  
[Help] for additional information.  
87  
CUSTOMIZING YOUR PHONE  
Voicemail  
To adjust the voicemail alert volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
“Others”, then press  
“Voicemail”.  
3. Highlight "Use ringer" or "Separate" and press  
to select. If Separate is selected, press  
to highlight the volume level. Press to adjust the volume level.  
/
This setting controls the volume of new voicemail alerts.  
Use ringtone vol.: Plays the voicemail alerts at the same volume as the voice ringtone and allows  
the side volume keys to change the voicemail alert volume at the same time as  
the voice ringtone.  
Use separate vol.: Plays the voicemail alerts at the selected volume level. Alerts will always play at  
this level unless the ringtone volume is set to “Silence all” or “Vibrate”.  
Always vibrate: Selecting this causes the application Select to add vibration to any sound. Only  
works with when “Separate” is selected.  
4. Press  
[Save] to save the setting.  
5. Press  
[Help] for additional information.  
88  
CUSTOMIZING YOUR PHONE  
Alarm & Scheduler  
To adjust the Alarm & Scheduler volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
“Others”, then press  
Alarm & Scheduler”.  
to select. If Separate is selected, press  
to adjust the volume level.  
3. Highlight "Use ringer" or "Separate" and press  
to highlight the volume level. Press  
/
This setting controls the volume of the alarm & scheduler.  
Use ringtone vol.: Plays the Alarm & Scheduler at the same volume as the voice ringtone and allows  
the side volume keys to change the alarm volume at the same time as the voice  
ringtone.  
Use separate vol.: Plays the Alarm & Scheduler at the selected volume level. Alerts will always play  
at this level unless the ringtone volume is set to “Silence all” or “Vibrate”.  
Always vibrate: Selecting this causes the application to add vibration to any sound.  
Only works with when “Separate” is selected.  
4. Press  
5. Press  
[Save] to save the setting.  
[Help] for additional information.  
89  
CUSTOMIZING YOUR PHONE  
Power On/Off  
To adjust the Power On/Off volume:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
“Volume".  
Press  
2. Press  
“Others”, then press  
“Power On/Off”.  
3. Highlight "Use ringer" or "Separate" and press  
to select. If Separate is selected, press  
to highlight the volume level. Press to adjust the volume level.  
/
This setting controls the volume of the sound when turning the phone on and off.  
Use ringtone vol.: Plays the power on/off alert at the same volume as the voice ringtone and allows  
the side volume keys to change the power on/off alert volume at the same time  
as the voice ringtone.  
Use separate vol.: Plays the power on/off alert at the selected volume level. Alerts will always play  
at this level unless the ringtone volume is set to “Silence all” or “Vibrate”.  
Always vibrate: Selecting this causes the application Select to add vibration to any sound.  
Only works with when “Separate” is selected.  
4. Press  
[Save] to save the setting.  
5. Press  
[Help] for additional information.  
90  
CUSTOMIZING YOUR PHONE  
ALERTS  
This feature allows you to set additional phone alerts.  
Minute Minder  
This alert notifies you with a beep tone every minute you are on a call.  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
"Alerts".  
Press  
2. Press  
"Minute Minder".  
3. Highlight “On” or “Off” then press  
[Select] to save the setting.  
Connect Tone  
This alert notifies you with a beep tone the a call has been successfully placed.  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
"Alerts".  
Press  
2. Press  
"Connect tone".  
3. Highlight “On” or “Off” then press  
[Select] to save the setting.  
Service Tone  
This alert notifies you with a beep tone that service is available for your phone.  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
"Alerts".  
Press  
2. Press  
"Service tone".  
3. Highlight “On” or “Off” then press  
[Select] to save the setting.  
91  
CUSTOMIZING YOUR PHONE  
Fade Tone  
This alert notifies you with a beep tone when the signal for your service is low.  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
"Alerts".  
Press  
2. Press  
"Fade tone".  
3. Highlight “On” or “Off” then press  
[Select] to save the setting.  
TONE LENGTH  
To adjust key pad tone length:  
1. Press  
[Menu], then press  
"Sound", then press  
"Settings".  
"Tone length".  
[Save] to save the setting.  
Press  
3. Highlight “Normal” or “Long” then press  
92  
CUSTOMIZING YOUR PHONE  
DISPLAY  
This set of features allows you to customize your display.  
GRAPHICS  
Select an image for your idle display.  
Graphics  
1. Press  
[Menu], then press  
"Display", then press  
"Settings".  
"Graphics".  
Press  
2. Press  
"Graphics".  
3. Select "My graphics" or "My pictures".  
4. Press  
/
to scroll through the images.  
5. Press  
[View], then press  
[Select] to save the setting.  
Clock and calendar  
1. Press  
[Menu], then press  
"Display", then press  
"Settings".  
"Graphics".  
Press  
2. Press  
"Clock and calendar".  
Clock types:  
Digital Clock: Shows displays date and time in written format.  
Calendar: Shows displays the current month's calendar.  
Dual clock: Shows Digital displays at top of display and selected city with its Digital date and time at  
bottom of display. Press  
[City] to select a city.  
Analog Clock: Shows displays time in a standard clock format.  
93  
CUSTOMIZING YOUR PHONE  
3. Press  
[Save] to save the setting.  
Screensaver  
1. Press  
[Menu], then press  
"Display", then press  
"Settings".  
"Graphics".  
Press  
2. Press  
"Screensaver".  
Time: Select 5, 10, 15, 20 secs or Screensaver off.  
My Graphics: Press  
/
to scroll through the images in My graphics.  
My Pictures: Press  
/
to scroll through the images in My pictures.  
3. Press  
[Select] to save the setting.  
INCOMING CALLS  
To select an image for Incoming Calls:  
1. Press  
[Menu], then press  
"Display", then press  
"Settings".  
"Incoming calls".  
to scroll through the images.  
Press  
2. Select My graphics or My pictures, then press  
3. Press [Select] to save the setting.  
/
MENU STYLE  
Select how the phone menu will display.  
1. Press  
[Menu], then press  
"Display", then press  
"Settings".  
"Menu style".  
Press  
2. Highlight “Grid style” or “List style” then press  
[Select] to save the setting.  
94  
CUSTOMIZING YOUR PHONE  
GREETING  
The greeting is your personal label for your phone. It appears on the main screen along the bottom  
of the display.  
1. Press  
[Menu], then press  
"Display", then press  
"Settings".  
"Greeting".  
Press  
2. Select "On" or "Off".  
3. If you select "On", the current greeting text is displayed. Press  
then enter your new greeting. Press [Options] to change the input mode.  
[Save] to save the greeting.  
to delete the greeting,  
4. Press  
BACKLIGHT  
Turn on the backlight on the display and keypad for easy viewing in dark places.  
Display  
Backlight the display:  
1. Press  
[Menu], then press  
"Display", then press  
"Settings".  
"Backlight".  
Press  
2. Press  
"Main display".  
3. Highlight one of the following options by pressing  
/
.
• 5 seconds, 10 seconds, 20 seconds, Always On, Always Dim.  
4. Press  
[Select] to save the setting.  
95  
CUSTOMIZING YOUR PHONE  
Keypad  
Backlight the Keypad:  
1. Press  
[Menu], then press  
"Display", then press  
"Settings".  
"Backlight".  
Press  
2. Press  
"Keypad".  
3. Highlight one of the following options by pressing  
/
.
• 5 seconds, 10 seconds, 20 seconds, Always Off.  
4. Press  
[Select] to save the setting.  
96  
CUSTOMIZING YOUR PHONE  
MESSAGING  
This feature enables you to manage your message settings.  
SOUND  
1. Press  
2. Press  
[Menu], then press  
"Sound".  
"Settings". Press  
"Messaging".  
3. Select "Text messaging", "Picture messaging" or "Voicemail".  
• My ringtones: Select a ringtone.  
• Vibration: Select Vibration 1~6.  
4. Press  
[Select] to save the setting.  
REMINDER  
When Reminder is on, your phone periodically alerts the user until all the received messages are  
checked by the user.  
1. Press  
2. Press  
[Menu], then press  
"Reminder".  
"Settings". Press  
"Messaging".  
3. Highlight "On" or “Off”, then press  
[Select] to save the setting.  
97  
CUSTOMIZING YOUR PHONE  
AUTO TEXT  
To edit the Auto Text message you have saved:  
1. Press  
2. Press  
[Menu], then press  
"Auto Text".  
"Settings". Press  
"Messaging".  
3. Highlight a message from the list. To add a new Quick Text message, press  
[Add New].  
4. To edit the Quick Text message you have selected, press  
characters you don't want then enter your text. Press  
the Auto Text list.  
. Press  
to delete any  
[Save] to save the text and return to  
TEXT ENTRY  
Sets an Entry Mode as a default:  
1. Press  
2. Press  
[Menu], then press  
"Text entry".  
"Settings". Press  
"Messaging".  
3. Highlight "T9 Word" or "Alphabet" then press  
[Select] to save the setting.  
GROUP  
To edit the Group:  
1. Press  
2. Press  
[Menu], then press  
"Group".  
"Settings". Press  
"Messaging".  
3. To add a new Group, press  
[Add].  
4. Press  
[Save] to save the new group  
98  
CUSTOMIZING YOUR PHONE  
SIGNATURE  
Create a signature that can be automatically inserted at the end of a text message.  
1. Press  
2. Press  
[Menu], then press  
"Signature".  
"Settings". Press  
"Messaging".  
3. Highlight "On" or "Off" then press  
[Select] to save the setting.  
SAVE TO SENT FOLDER  
Select if you want to automatically save a message after sending it.  
1. Press  
[Menu], then press  
"Settings". Press  
"Messaging".  
2. Press  
"Save to Sent folder".  
3. Highlight "Auto", "Off" or "User confirmation" then press  
[Select] to save the setting.  
AUTO ERASE  
Automatically erases messages when new messages arrive.  
1. Press  
2. Press  
[Menu], then press  
"Auto Erase".  
"Settings". Press  
"Messaging".  
3. Highlight "Yes" or "No" then press  
[Select] to save the setting.  
NOTIFICATION  
Sets an Notification:  
1. Press  
2. Press  
[Menu], then press  
"Notification".  
"Settings". Press  
"Messaging".  
3. Highlight “Icon & Message” or “Icon Only” then press  
[Select] to save the setting.  
99  
CUSTOMIZING YOUR PHONE  
BLUETOOTH  
Bluetooth allows you to connect your phone to compatible, Bluetooth-enabled devices, such as a  
wireless headset (sold separately). Since devices with Bluetooth connectivity communicate using  
radio waves, your phone and the other device do not need to be in direct line-of-sight. The two  
devices only need to be within 10 meters (30 feet) of each other. However, the connection may  
sometimes suffer interference from obstructions such as walls or other electronic devices.  
The Super Slice is compatible with devices that support the Bluetooth® Headset (HSP), Hands-Free  
(HFP) Profiles. Your phone is based on the Bluetooth® specification, but it is not guaranteed to  
work with all devices enabled with Bluetooth® wireless technology.  
PAIRING YOUR PHONE  
You can manage your Bluetooth connections through the My Device menu.  
1. Press  
2. Press  
[Menu], then press  
"My device".  
"Settings". Press  
"Bluetooth".  
Press  
[Options] to choose from:  
• Add New: Searches for Bluetooth devices in possible range.  
• Assign Short Name: To assign short a name to a device.  
• Device Info: Displays information about a Bluetooth device.  
• Erase: To erase a selected Bluetooth device.  
• Erase All: To erase all Bluetooth devices.  
3. Your phone will display the names of Bluetooth devices it has previously discovered. If none  
have been detected, “No matches found” will be displayed.  
4. For a new device, press  
[Options], then  
Add new”.  
100  
CUSTOMIZING YOUR PHONE  
If Bluetooth is disabled in your phone, you will get the message “Bluetooth is disabled. Enable?”.  
Press to enable Bluetooth.  
5. Your phone will search for a Bluetooth device within range. Once detected, the name will be  
displayed.  
6. Press  
[Pair] to pair the devices. Add [device name] to my device?” will be displayed.  
for “Yes”.  
Press  
7. Enter your passcode then press  
[OK]. Consult your Bluetooth device manual for the code.  
Typically the default passcode is 0000.  
8. Once your new Bluetooth device is paired with your phone, you will see a confirmation screen.  
Press  
to connect the device to your phone.  
SETTINGS  
Customizes your phone and optimizes performance through a variety of settings:  
1. Press  
2. Press  
[Menu], then press  
"Settings".  
"Settings". Press  
"Bluetooth".  
Set Bluetooth: Turn Bluetooth on or off.  
Handset’s visibility: Select “Hidden” or “Shown to all”.  
Handset’s Name: Edit the name of the device.  
3. Press  
[Save] to save the settings.  
101  
CUSTOMIZING YOUR PHONE  
SUPPORT SERVICE  
Displays the following list of options:  
1. Press  
2. Press  
[Menu], then press  
"Support service".  
"Settings". Press  
"Bluetooth".  
Hand Free Service: This is used to allows car hands-free kits to communicate with mobile phones in the  
car. In the car, the stereo is used for the phone audio and a microphone is installed in  
the car for sending outgoing audio.  
Headset Service: This is provides support for the popular Bluetooth headsets to be used with mobile  
phones. When connected and configured, the headset can act as the remote device a  
audio input and output interface.  
INFORMATION  
View Name, Address informations:  
1. Press  
2. Press  
[Menu], then press  
"Information".  
"Settings". Press  
"Bluetooth".  
3. View information (Name, Address). To return preview page, press  
[Close].  
102  
CUSTOMIZING YOUR PHONE  
SECURITY  
Use these settings to prevent unauthorized use of your phone.  
HANDSET LOCK  
Turn on the lock to prevent the phone from being used without entering the password first.  
IMPORTANT: Be sure to write down your lock code if you change it. Virgin Mobile cannot unlock  
your phone for you if you forget your lock code.  
1. Press  
[Menu], then press  
Enter your password.  
"Settings". Press  
"Security".  
• The default password is the last 4 digits of your phone number.  
"Handset lock".  
2. Press  
3. Highlight “Off”, “When switch on”, or “Immediately” then press  
[Select] to save the  
setting.  
Off: Do not lock the handset.  
When switch on: Lock the phone when switch on.  
Immediately : Lock the phone now.  
103  
CUSTOMIZING YOUR PHONE  
KEY LOCK  
Set Key Lock:  
1. Press  
[Menu], then press  
Enter your password.  
"Settings". Press  
"Security".  
• The default password is the last 4 digits of your phone number.  
"Key lock".  
2. Press  
3. Highlight “Off”, “20sec”, "30sec" "1min" or “3min” then press  
[Select] to save the  
setting.  
SPECIAL NUMBER  
This features allows you to set 3 phone numbers that can be called even when the phone is locked.  
1. Press  
[Menu], then press  
Enter your password.  
"Settings". Press  
"Security".  
• The default password is the last 4 digits of your phone number.  
2. Press  
"Special number".  
3. Select a location and press  
[Add].  
4. Enter the phone number and press  
[Save] to save it to that location.  
104  
CUSTOMIZING YOUR PHONE  
CHANGE LOCK CODE  
You can change the 4-digit password to lock and unlock your phone.  
IMPORTANT: Be sure to write down your lock code if you change it. Virgin Mobile cannot unlock  
your phone for you if you forget your lock code.  
1. Press  
[Menu], then press  
Enter your password.  
"Settings". Press  
"Security".  
• The default password is the last 4 digits of your phone number.  
"Change lock code".  
2. Press  
3. Enter your lock code then enter your new lock code. Enter your new lock code again.  
ERASE DATA  
Erase all data in your phone.  
1. Press  
[Menu], then press  
Enter your password.  
"Settings". Press  
"Security".  
• The default password is the last 4 digits of your phone number.  
"Erase Data".  
2. Press  
3. Select “Erase Contacts”, “Erase downloads”, “Erase voice memo”, “Erase pictures”, or “Erase  
message”.  
4. A warning message displayed.  
5. Select "Yes" then press  
to erase data in your phone.  
105  
CUSTOMIZING YOUR PHONE  
RESET BROWSER  
Reset browser setting.  
1. Press  
[Menu], then press  
Enter your password.  
"Settings". Press  
"Security".  
• The default password is the last 4 digits of your phone number.  
2. Press  
3. Select "Yes" then press  
"Reset Browser".  
to reset browser setting.  
DEFAULT SETTINGS  
Reset all settings.  
1. Press  
[Menu], then press  
Enter your password.  
"Settings". Press  
"Security".  
• The default password is the last 4 digits of your phone number.  
2. Press  
"Default Settings".  
3. A warning message displayed.  
4. Select "Yes" then press  
to reset all settings.  
106  
CUSTOMIZING YOUR PHONE  
RESET HANDSET  
Delete all data from your device.  
1. Press  
[Menu], then press  
Enter your password.  
"Settings". Press  
"Security".  
• The default password is the last 4 digits of your phone number.  
2. Press  
"Reset handset".  
3. A warning message displayed.  
4. Select "Yes" then press  
to erase all data in your phone.  
107  
CUSTOMIZING YOUR PHONE  
LOCATION  
Your telephone is equipped with a Location feature for use in connection with location-based  
services that may be available in the future. The Location Feature allows the network to detect your  
position. Turning Location Off will hide your location from everyone except 911.  
1. Press  
[Menu], then press  
"Settings". Press  
"Location".  
• Turning location on will allow the network to detect your position using GPS technology, making some  
Virgin Mobile applications and services easier to use. Turning location off will disable the GPS location  
function for all purposes except 911, but will not hide your general location based on the cell site  
serving your call. No application or services may use your location without your express permission.  
GPS enhanced 911 is not available in all areas.  
2. Press  
[Next]. Highlight “Enable” or “Disable”, then press  
[Select] to select it.  
Enable: Turning location “Enable” lets the network detect your whereabouts using GPS.  
Disable: Turning location "Disable" disables GPS- except for 911- but cell tower technology may still used  
to detect your whereabouts for some features and basic telephone service.  
108  
CUSTOMIZING YOUR PHONE  
CALL SETTINGS  
ANSWER MODE  
This feature allows you to select the answer mode.  
1. Press  
[Menu], then press  
"Call Settings", then press  
"Settings".  
"Answer mode".  
[Select] to save the setting.  
Press  
2. Highlight “Talk key only” or Any key”, then press  
Talk key only: Press only  
to answer a call.  
Any key: Press any key to answer an incoming call.  
AUTO ANSWER  
This features allows you to set the phone to answer automatically when you're using a hands-free  
headset.  
1. Press  
[Menu], then press  
"Call Settings", then press  
"Settings".  
"Auto answer".  
Press  
2. Highlight “Off”, “5 sec”, “10 sec”, or “20 sec” then press  
[Select] to save the setting.  
109  
CUSTOMIZING YOUR PHONE  
OTHERS  
TTY  
Your phone is able to operate with a TTY(Teletypewriter) device. This feature is system dependent  
and may not be available in all areas.  
1. Press  
[Menu], then press  
• Enabling TTY may impair headset use and non- TTY accessory performance.  
[Next]. Select “On” or “Off.”, then press [Select] to save the setting.  
"Settings". Press  
“Others”, then press  
"TTY".  
2. Press  
ABBREV. DIAL  
This function allows you to dial just the last 4 digits of phone number, instead of all the digits. If  
you have several phone numbers that start with the same digits, you can enter the beginning  
numbers here so when you dial the phone, all you enter is the last 4 digits.  
1. Press  
[Menu], then press  
"Others", then press  
"Settings".  
"Abbrev. Dial".  
[Select] to save the setting.  
3. If On is selected, a blank screen will appear. Enter the digits that are common to several phone  
numbers you dial and press  
Press  
2. Select “On” or “Off”, then press  
.
• You have 5 numbers you dial often that all begin with (516) 123. In the blank screen that appears when you select  
"Enable", type in 516123.  
• When you need to dial (516) 123-6652, simply press 6652  
(516) 123-6652.  
. Your phone will show it is dialing  
110  
CUSTOMIZING YOUR PHONE  
CONTACTS MATCH  
This function will match your abbreviated dialed number with an entry from your phone's contact  
list. So when you dial the 4 digits, your phone will show the name of the contact you are dialing as  
well as the phone number.  
1. Press  
[Menu], then press  
"Others", then press  
"Settings".  
"Contacts Match".  
Press  
2. Select “On” or “Off”, then press  
[Select] to save the setting.  
TYPING MODE  
1. Press  
[Menu], then press  
"Others", then press  
"Settings".  
"Typing mode".  
Press  
• Auto-capital: Select "On" or "Off".  
• Auto-space: Select "On" or "Off".  
• My words: To add my words, press  
• T9 settings:  
[Add].  
-Prediction length: Select "3+letter words", "4+letter words", "5+letter words" or  
"6+letter words".  
-Next word prediction: Select "On" or "Off".  
-Word completion: Select "On" or "Off".  
-Word choice list: Select "On" or "Off".  
• Help  
111  
CUSTOMIZING YOUR PHONE  
VOICE COMMANDS  
Optimizes performance through a Voice Recognition Settings.  
Voice Recognition Results  
The “Voice Recognition Results” option will allow you to choose if the Command System prompts  
you with a list of potential matches.  
1. Press  
[Menu], then press  
"Others", then press  
"Settings".  
"Voice Commands".  
Press  
2. Press  
"Voice Recognition Results".  
3. Select “One” or “Three Best”, then press  
. Press  
[Close] to save the setting.  
Voice Calibration  
Voice Calibration is the process of optimizing the voice recognition software to your voice.  
Train Voice requires that you make recordings of your voice, which are then used to customize the  
voice recognition system. This will take a few minutes and you should be in a quiet environment  
for optimum training.  
1. Press  
[Menu], then press  
"Others", then press  
"Settings".  
"Voice Commands".  
Press  
2. Press  
“Voice Calibration”.  
3. Select “Train Words” or “Train Digits”. You will be prompted to speak the words listed on the  
screen. Say each word as you are prompted.  
112  
CUSTOMIZING YOUR PHONE  
Prompts  
The prompts settings, “Mode” or “Timeout", will allow you to set how you are notified by the voice  
command system and the duration in which you can respond. To access “Prompts:”  
1. Press  
[Menu], then press  
"Others", then press  
"Settings".  
"Voice Commands".  
Press  
2. Press  
"Prompts".  
3. Select “Mode“ or “Timeout”.  
Mode: Select "Prompt" or “Tones Only”.  
Timeout: Select “5 sec” or “10 sec”.  
4. Press  
, then press  
[Close] to save the setting.  
Number Format  
1. Press  
[Menu], then press  
"Others", then press  
"Settings".  
"Voice Commands".  
Press  
2. Press  
"Number Format".  
3. Select Accept Any“ or “North America”.  
4. Press , then press [Close] to save the setting.  
113  
MEMO  
114  
CHAPTER 11 USING TOOLS  
CHAPTER 11  
USING TOOLS  
This section shows you how to use features that can  
help you keep up with your contacts, schedules and  
appointments.  
115  
USING TOOLS  
VOICE  
VOICE MEMO  
Voice Memo allows you to record a reminder message that can be up to 4 minutes.  
To record a memo:  
1. Press  
[Menu], then press  
"Voice". Press  
"Tools".  
"Voice Memo ".  
Press  
2. To record a voice memo, select press  
[Record].  
3. To stop recording a voice memo, press  
[Stop]. Stopping the recording will automatically  
save the entry. The list is sorted by dates of the voice memo list.  
4. Press  
[Options] to select one of the following options:  
Play: To play voice memo.  
Rename: To edit voice memo name.  
Erase: To delete a voice memo.  
Erase All: To delete all voice memo.  
VOICE COMMAND  
To activate voice recognition:  
1. Press  
[Menu], then press  
"Voice". Press  
"Tools".  
"Voice Command ".  
Press  
2. When prompted,say one of the following commands:  
• Call, Digit Dial, Voicemail, My Phone #, Status, Help.  
116  
USING TOOLS  
• When it recognizes one of these commands,the phone launches the associated application. You may be  
asked to repeat a command if the command is not recognized by voice recognition.  
Tip  
3. To return to the previous page,press  
.
TIP CALCULATOR  
Your phone comes with two calculators: a standard calculator and a tip calculator.  
1. Press  
[Menu], then press  
"Tip calculator".  
"Tools".  
Press  
2. Input numbers using your keypad, then press  
.
3. Input Rate numbers using your keypad. Press  
for a decimal point.  
4. Press  
[Clear] for clear tip calculator.  
to calculate the result.  
Press  
117  
USING TOOLS  
CALCULATOR  
Your phone comes with two calculators: a standard calculator and a tip calculator.  
1. Press  
[Menu], then press  
"Calculator".  
"Tools".  
Press  
2. Enter numbers using your keypad, and use the following keys to enter mathematical functions:  
• Press  
• Press  
• Press  
for Multiplication (x). Press  
for Addition (+). Press  
to change a number from positive (+) to negative (-).  
for Division (÷). Press  
for a decimal point. Press  
for Subtraction (-).  
[Clear] to clear all numbers.  
3. Press  
to calculate the result.  
ALARM CLOCK  
1. Press  
[Menu], then press  
"Tools".  
Press  
"Alarm Clock".  
2. Select Alarm 1, 2 or 3 to set a new alarm.  
3. The setting field will be highlighted. Press  
to select alarm options.  
Set: Press  
/
to select alarm on or off.  
Time: Use the keypad to set a time for the alarm and  
to select AM” or “PM”.  
to select Daily/Once/Mon to Fri/Sat to Sun.  
to select 5Min/10Min/15Min/20Min.  
Repeat: Press  
Snooze: Press  
/
/
Ring type: Press navigation keys to select a ringtone for the alarm sound.  
4. To save an alarm setting press  
[Save].  
118  
USING TOOLS  
SCHEDULER  
ADD NEW EVENT  
1. Press  
[Menu], then press  
to choose a date in the calendar.  
[Add] to add an event to the calendar.  
"Tools". Press  
"Scheduler".  
2. Press  
Press  
3. The Schedule screen will be displayed. When the Title field is highlighted, enter the event title.  
Then press  
pressing  
Press  
[Save]. Press  
to the number and press the digit key you want.  
to move to the next field. Edit the start time by pressing  
press the digit key you want. Press for AM” or “PM”.  
Press to move to the next field. Edit the end date by pressing  
press the digit key you want.  
to move to the next fields. Edit the start date by  
/
/
to the number and  
to the number and  
to the number and  
/
/
Press  
to move to the next field. Edit the end time by pressing  
press the digit key you want. Press  
for AM” or “PM”.  
Press  
to move to the next field. In the Contents field, enter any notes or message for the  
event, then press  
next field. In the Notice field, press  
Before 1 hour or Before one day. Press  
[Save] to go back to the Scheduler screen. Press  
to move to the  
to select On Time, Before 10 min, Before 20min,  
to move to the next field. In the Snooze field,  
/
press  
/
to select 5Min, 10Min, 15Min, or 20Min. Press  
to move to the next fields.  
[Select].  
In the Ring Type field, highlight the ringtone you want and press  
4. Press  
[Save] to save the event.  
5. The date of the event will be marked on your calendar.  
119  
USING TOOLS  
MEMO PAD  
Your phone includes an internal memo pad that can be used to compose and store reminders and  
notes.  
1. Press  
[Menu], then press  
"Memo Pad".  
"Tools".  
Press  
2. To input a memo, select press  
[Add].  
3. Press  
[Save] to save the memo.  
STOPWATCH  
You can simultaneously time up to 10 different events.  
1. Press  
[Menu], then press  
"Stopwatch".  
"Tools".  
Press  
2. To measure a time period:  
• To start, press  
• To stop the timing, press  
• Press  
• To reset it, press  
[Start].  
[Stop]. To continue timing, press  
[Cont.].  
[Lap] to save the time at one instance. You can show up to 10 times.  
[Reset].  
120  
USING TOOLS  
WORLD CLOCK  
To display the time and date in pre-programmed cities:  
1. Press  
[Menu], then press  
"World Clock".  
"Tools".  
Press  
2. Press  
/
to scroll through the different cities.  
• DST: Specifies whether the current time of the selected place is adjusted to daylight saving time.  
• Dual: Show ahead dual clock.  
MEMORY MANAGER  
1. Press  
[Menu], then press  
"Tools".  
Press  
"Memory manager".  
2. View total, used, free memory information.  
121  
MEMO  
122  
CHAPTER 12 WARRANTY  
CHAPTER 12  
WARRANTY  
123  
WARRANTY  
MANUFACTURER’S WARRANTY  
12 MONTH LIMITED WARRANTY  
UTStarcom Personal Communications (the Company) warrants to the original retail purchaser of this UTStarcom  
handheld portable cellular telephone, that should this product or any part thereof during normal consumer  
usage and conditions, be proven defective in material or workmanship that results in product failure within the  
first twelve (12) month period from the date of purchase, such defect(s) will be repaired or replaced (with new  
or rebuilt parts) at the Company’s option, without charge for parts or labor directly related to the defect(s).  
The antenna, keypad, display, rechargeable battery and battery charger, if included, are similarly warranted for  
twelve (12) months from date of purchase.  
This Warranty extends only to consumers who purchase the product in the United States or Canada and it is not  
transferable or assignable.  
This Warranty does not apply to:  
(a) Product subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration,  
misuse, improper installation or repair or improper storage;  
(b) Product whose mechanical serial number or electronic serial number has been removed, altered or defaced.  
(c) Damage from exposure to moisture, humidity, excessive temperatures or extreme environmental conditions;  
(d) Damage resulting from connection to, or use of any accessory or other product not approved or authorized  
by the Company;  
(e) Defects in appearance, cosmetic, decorative or structural items such as framing and non-operative parts;  
(f) Product damaged from external causes such as fire, flooding, dirt, sand, weather conditions, battery leakage,  
blown fuse, theft or improper usage of any electrical source.  
The Company disclaims liability for removal or reinstallation of the product, for geographic coverage, for  
inadequate signal reception by the antenna or for communications range or operation of the cellular system as  
a whole.  
124  
WARRANTY  
When sending your wireless device to UTStarcom Personal Communications for repair or service, please note  
that any personal data or software stored on the device may be inadvertently erased or altered. Therefore,  
we strongly recommend you make a back up copy of all data and software contained on your device before  
submitting it for repair or service. This includes all contact lists, downloads (i.e. third-party software applications,  
ringtones, games and graphics) and any other data added to your device. In addition, if your wireless device  
utilizes a SIM or Multimedia card, please remove the card before submitting the device and store for later  
use when your device is returned, UTStarcom Personal Communications is not responsible for and does not  
guarantee restoration of any third-party software, personal information or memory data contained in, stored  
on, or integrated with any wireless device, whether under warranty or not, returned to UTStarcom Personal  
Communications for repair or service.  
To obtain repairs or replacement within the terms of this Warranty, the product should be delivered with proof of  
Warranty coverage (e.g. dated bill of sale), the consumer’s return address, daytime phone number and/or fax  
number and complete description of the problem, transportation prepaid, to the Company at the address shown  
below or to the place of purchase for repair or replacement processing.  
In addition, for reference to an authorized Warranty station in your area, you may telephone in the United States  
(800) 229-1235, and in Canada (800) 465-9672 (in Ontario call 416-695-3060).  
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR  
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LAIBILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR  
BREACH OF ANY WARRANTY MUST BE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL  
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR AN SPECIAL CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. THE  
COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS WARRANTY OR LOSS OF  
USE DURING THE TIME THE PRODUCT IS BEING REPAIRED OR REPLACED.  
125  
WARRANTY  
No person or representative is authorized to assume for the Company any liability other than expressed herein  
in connection with the sale of this product.  
Some states or provinces do not allow limitations on how long an implied warranty lasts or the exclusion or  
limitation of incidental or consequential damage so the above limitation or exclusions may not apply to you.  
This Warranty gives you specific legal rights, and you may also have other rights, which vary from state to state  
or province to province.  
IN USA:  
UTStarcom Personal Communications 555 Wireless Blvd.  
Hauppauge, NY 11788  
(800) 229-1235  
IN CANADA:  
UTStarcom Canada Company  
5535 Eglinton Avenue West  
Suite# 234  
Toronto, ON M9C 5K5  
(800) 465-9672  
126  
CHAPTER 13 SAFETY  
CHAPTER 13  
SAFETY  
Read this important safety information before using  
your phone.  
127  
SAFETY  
SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES  
Read This Information Before Using Your Handheld Portable Cellular Telephone  
DRIVING SAFETY  
Talking on the phone while driving is extremely dangerous and is illegal in some states. Remember, safety  
comes first. Check the laws and regulations on the use of phones in the areas where you drive. Always obey  
them. If you must use your phone while driving, please:  
Give full attention to driving. Driving safely is your first responsibility.  
Use hands-free operation and/or one-touch, speed dialing, and auto answer modes.  
Pull off the road and park before making or answering a call.  
An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless  
equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is  
improperly installed and the air bag inflates, serious injury could result.  
WARNING!: Failure to follow these instructions could lead to serious personal injury and possible property  
damage.  
ELECTRONIC DEVICES  
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it  
receives and also sends out radio frequency (RF) signals.  
Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment may not  
be shielded against the RF signals from your wireless phone. Therefore, use of your phone must be restricted in  
certain situations.  
PACEMAKERS  
The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be  
maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the  
pacemaker. These recommendations are consistent with the independent research by and recommendations of  
Wireless Technology Research.  
128  
SAFETY  
Never come closer than six (6) inches to a person with a heart pacemaker implant when using your phone.  
Doing so could result in interference with the function of the pacemaker.  
Persons with pacemakers :  
ALWAYS keep the phone more than six inches from your pacemaker when the phone is turned on.  
Do not carry the phone in a breast pocket.  
Use the ear opposite the pacemaker to minimize the potential for interference.  
If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.  
HEARING AIDS  
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may  
want to consult your service provider (or call the customer service line to discuss alternatives).  
OTHER MEDICAL DEVICES  
If you use any other personal medical device, consult the manufacturer of your device to determine if they  
are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this  
information.  
HOSPITALS AND HEALTH CARE FACILITIES  
Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so.  
Hospitals or healthcare facilities may be using equipment that could be sensitive to external RF energy.  
VEHICLES  
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check  
with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of  
any equipment that has been added to your vehicle.  
POSTED FACILITIES  
Turn your phone OFF where posted notices so require.  
129  
SAFETY  
AIRCRAFT  
FCC regulations prohibit using your phone while in the air. Turn your phone OFF before boarding an aircraft.  
Always request and obtain prior consent and approval of an authorized airline representative before using your  
phone aboard an aircraft. Always follow the instructions of the airline representative whenever using your  
phone aboard an aircraft, to prevent any possible interference with airborne electronic equipment.  
BLASTING AREAS  
To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted  
“Turn off two-way radio”. Obey all signs and instructions.  
POTENTIALLY EXPLOSIVE ATMOSPHERES  
Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and  
instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.  
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling  
areas such as gas stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using  
liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such  
as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your  
vehicle’s engine.  
SAFETY INFORMATION FOR FCC RF EXPOSURE  
Warning! Read this information before using your phone.  
In August 1996 the Federal Communications Commission (FCC) of the United States with its action in  
Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency  
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety  
standard previously set by both U.S. and international standards bodies. The design of this phone complies with  
the FCC guidelines and these international standards.  
BODY-WORN OPERATION  
This device was tested for typical body-worn operations with the back of the phone kept 15 mm from the body.  
130  
SAFETY  
To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories  
that maintain a 15 mm separation distance between the user’s body and the back of the phone, including the  
antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its  
assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure  
requirements, and should be avoided.  
For more information about RF exposure, please visit the FCC website at www.fcc.gov.  
SAR INFORMATION  
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO  
RADIO WAVES.  
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the  
emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of  
the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF  
energy for the general population. The guidelines are based on standards that were developed by independent  
scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a  
substantial safety margin designed to assure the safety of all persons, regardless of age and health.  
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific  
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the phone  
*
transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined  
at the highest certified power level, the actual SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the  
power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower  
the power output. Before a phone model is available for sale to the public, it must be tested and certified to the  
FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The  
tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for  
each model.  
The highest SAR value for this model phone when tested for use at the ear is 1.47 W/kg PCS CDMA Head SAR  
and when worn on the body, as described in this user guide, is 0.809 W/kg PCS CDMA Body SAR. (Body-worn  
131  
SAFETY  
measurements differ among phone models, depending upon available accessories and FCC requirements).  
While there may be differences between the SAR levels of various phones and at various positions, they all meet  
the government requirement for safe exposure.  
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated  
as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the  
FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on O6Y-  
PCS1450.  
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications &  
Internet Association (CTIA) web-site at http://www.phonefacts.net.  
In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg)  
averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional  
protection for the public and to account for any variations in measurements.  
*
FDA CONSUMER UPDATE  
U.S. Food and Drug Administration Cell Phone Facts  
Consumer Information on Wireless Phones  
1. What kinds of phones are the subject of this update?  
The term “wireless phone” refers here to handheld wireless phones with built-in antennas, often called “cell,”  
“mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radiofrequency  
energy (RF) because of the short distance between the phone and the user’s head. These RF exposures are  
limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA  
and other federal health and safety agencies. When the phone is located at greater distances from the user, the  
exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance  
from the source. The so-called "cordless phones," which have a base unit connected to the telephone wiring  
in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's  
compliance limits.  
132  
SAFETY  
2. Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems are associated with using wireless  
phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels  
of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF  
when in the standby mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure  
to low level RF that does not produce heating effects causes no known adverse health effects. Many studies  
of low level RF exposures have not found any biological effects. Some studies have suggested that some  
biological effects may occur, but such findings have not been confirmed by additional research. In some cases,  
other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent  
results.  
3 . What is FDA's role concerning the safety of wireless phones?  
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones  
before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to  
take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the  
user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard  
and to repair, replace or recall the phones so that the hazard no longer exists.  
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone  
industry to take a number of steps, including the following:  
• Support needed research into possible biological effects of RF of the type emitted by wireless phones;  
• Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device  
function; and  
• Cooperate in providing users of wireless phones with the best possible information on possible effects of  
wireless phone use on human health  
FDA belongs to an interagency working group of the federal agencies that have responsibility for different  
aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this  
working group:  
• National Institute for Occupational Safety and Health  
• Environmental Protection Agency  
133  
SAFETY  
• Federal Communications Commission  
• Occupational Safety and Health Administration  
• National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency working group activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC).  
All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure.  
FCC relies on FDA and other health agencies for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations  
operate at higher power than do the wireless phones themselves, the RF exposures that people get from these  
base stations are typically thousands of times lower than those they can get from wireless phones. Base  
stations are thus not the primary subject of the safety questions discussed in this document.  
4. What are the results of the research done already?  
The research done thus far has produced conflicting results, and many studies have suffered from flaws  
in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF)  
exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in  
other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However, many of the studies that showed increased tumor  
development used animals that had been genetically engineered or treated with cancer-causing chemicals so  
as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF  
for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless  
phones, so we don’t know with certainty what the results of such studies mean for human health.  
Three large epidemiology studies have been published since December 2000. Between them, the studies  
investigated any possible association between the use of wireless phones and primary brain cancer, glioma,  
meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the  
studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However,  
none of the studies can answer questions about long-term exposures, since the average period of phone use in  
these studies was around three years.  
134  
SAFETY  
5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of people actually using wireless phones would  
provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years.  
However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect  
if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10  
or more years’ follow-up may be needed to provide answers about some health effects, such as cancer. This is  
because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if  
they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in  
measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement,  
such as the angle at which the phone is held, or which model of phone is used.  
6. What is FDA doing to find out more about the possible health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world  
to ensure that high priority animal studies are conducted to address important questions about the effects of  
exposure to radiofrequency energy (RF).  
FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF)  
Project since its inception in 1996. An influential result of this work has been the development of a detailed  
agenda of research needs that has driven the establishment of new research programs around the world. The  
Project has also helped develop a series of public information documents on EMF issues.  
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and  
Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight,  
obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is  
conducted through contracts to independent investigators. The initial research will include both laboratory  
studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional  
research needs in the context of the latest research developments around the world.  
7. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?  
If there is a risk from these products--and at this point we do not know that there is--it is probably very small.  
But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your  
exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives,  
135  
SAFETY  
reducing the amount of time spent using a wireless phone will reduce RF exposure.  
• If you must conduct extended conversations by wireless phone every day, you could place more distance  
between your body and the source of the RF, since the exposure level drops off dramatically with distance. For  
example, you could use a headset and carry the wireless phone away from your body or use a wireless phone  
connected to a remote antenna  
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about  
the RF exposure from these products, you can use measures like those described above to reduce your RF  
exposure from wireless phone use.  
8. What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If  
you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would  
apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing  
the distance between the user and the RF source will reduce RF exposure.  
Some groups sponsored by other national governments have advised that children be discouraged from using  
wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such  
a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes  
brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly  
precautionary; it was not based on scientific evidence that any health hazard exists.  
9. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to  
believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and  
comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source  
of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against  
the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless  
phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used  
against the head or against the body. Either configuration should result in compliance with the safety limit.  
10. Do wireless phone accessories that claim to shield the head from RF radiation work?  
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to  
136  
SAFETY  
believe that accessories that claim to shield the head from those emissions reduce risks. Some products that  
claim to shield the user from RF absorption use special phone cases, while others involve nothing more than  
a metallic accessory attached to the phone. Studies have shown that these products generally do not work as  
advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone.  
The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February  
2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect  
wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these  
defendants lacked a reasonable basis to substantiate their claim.  
11. What about wireless phone interference with medical equipment?  
Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason,  
FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac  
pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored  
by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by  
FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.  
FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary  
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test  
methods and performance requirements for hearing aids and wireless phones so that that no interference occurs  
when a person uses a “compatible” phone and a “compatible” hearing aid at the same time. This standard was  
approved by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should  
harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve  
the problem.  
Updated July 29, 2003  
For more information, please visit the FDA website at http://www.fda.gov/cellphones.  
137  
SAFETY  
EMERGENCY CALLS  
Never rely solely upon your wireless phone for essential communications (e.g., medical emergencies), if it can  
be avoided, since a wireless phone requires a complex combination of radio signals, relay stations and landline  
networks for its operation. Consequently, emergency calls may not always be possible under all conditions  
on all wireless phone systems. Your wireless phone, however, may sometimes be the only available means of  
communication at the scene of an accident. When making an emergency call, always give the recipient all  
necessary information as accurately as possible. Never terminate an emergency call until you have received  
clearance to do so.  
FCC ENHANCED 911 (E911) RULES  
Background  
The Federal Communications Commission (FCC) requires wireless carriers to transmit specific latitude and  
longitude location (Automatic Location Identification = ALI) information as well as “911” calls to Public Safety  
Answering Points (PSAPs) to identify the location of the caller in case of emergency.  
Generally, the rules require that carriers identify an E911 caller’s location within 50 meters of the actual location  
for 67 percent of calls and within 150 meters of the actual location for 95 percent of calls.  
Super Slice’s ALI Capability.  
The Super Slice is an ALI-capable phone equipped with a GPS (Global Positioning System) receiver supporting a  
satellite-based GPS ALI-capable network to comply with the FCC’s ALI requirements.  
The network compliance with the above FCC requirements is dependent on: (a) the use of digital technology  
by the wireless network; (b) GPS satellite signals being able to reach the handset (such transmissions do not  
always work indoors, for example) ; and (c) handset signals reaching wireless “base stations” (atmospheric and  
environmental conditions may cause variations in handset receiving signal strength).  
Also the transmission of the ALI information is subject, in part, to system constraints within the wireless  
network to which the E911 signal is transmitted and over which UTStarcom has no control.  
Finally, customers are advised that the Super Slice ALI capability is to be used for E911 purposes only.  
This feature allows you to place an emergency call even if your phone is in “Phone Lock” or “Restrict” mode  
138  
SAFETY  
when you dial the preprogrammed emergency number, 911, #911, or *911. It also operates in out-of-service  
areas.  
The phone maintains emergency mode until you press  
after disconnecting an emergency call. In  
emergency call mode, the phone can receive an incoming call from any available system.  
To call "911" in "Phone Lock" or "Restrict" mode.  
1. Enter  
2. Press  
,
,
.
. "911” and "Emergency" will appear on the screen.  
COMPLIANCE WITH OTHER FCC REGULATIONS  
OPERATING PROCEDURES  
Never violate any of the following Rules and Regulations of the FCC when using your Cellular Phone. Such  
violations are punishable by fine, imprisonment or both.  
• Never use your Cellular Phone to send false distress calls.  
• Never wiretap or otherwise intercept a phone call, unless you have first obtained the consent of the parties  
participating in the call.  
• Never make any anonymous calls to annoy, harass, or molest other people.  
• Never charge another account without authorization, to avoid payment for service.  
• Never willfully or maliciously interfere with any other radio communications.  
• Never refuse to yield the line when informed that it is needed for an Emergency Call. Also, never take over a  
line by stating falsely that it is needed for an emergency.  
139  
SAFETY  
GENERAL SAFETY  
PRECAUTIONS  
Your Handheld Portable Telephone is a high quality piece of equipment. Before operating, read all instructions  
and cautionary markings on the product, battery and adapter/charger.  
Failure to follow the directions below could result in serious bodily injury and/or property damage due to battery  
liquid leakage, fire or rupture.  
DO NOT use or store this equipment in a place where it will be exposed to high temperatures, such as near an  
open flame or heat-emitting equipment.  
DO NOT drop your device or subject it to severe shock. When not using, lay down the unit to avoid possible  
damage due to instability.  
DO NOT expose this equipment to rain or spilled beverages.  
DO NOT use unauthorized accessories.  
DO NOT disassemble the phone or its accessories. If service or repair is required, return unit to an authorized  
UT Starcom cellular service center. If unit is disassembled, the risk of electric shock or fire may result.  
ANTENNA  
ANTENNA SAFETY  
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or  
attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Please  
contact your local dealer for replacement antenna.  
Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a  
minor burn may result. Please contact your local dealer for replacement antenna.  
140  
SAFETY  
BATTERY  
BATTERY SAFETY  
Your device uses a removable and rechargeable lithium ion battery. Please contact customer service for  
assistance should you need a replacement battery.  
DOs  
• Only use the battery and charger approved by the manufacturer.  
• Only use the battery for its original purpose.  
• Try to keep batteries in a temperature between 41°F (5°C) and 95°F (35°C).  
• If the battery is stored in temperatures above or below the recommended range, give it time to warm up or  
cool down before using.  
• Completely drain the battery before recharging. It may take one to four days to completely drain.  
• Store the discharged battery in a cool, dark, and dry place.  
• Purchase a new battery when its operating time gradually decreases after fully charging.  
• Properly dispose of the battery according to local regulations.  
DON’Ts  
• Don’t attempt to disassemble the battery – it is a sealed unit with no serviceable parts.  
• Don’t expose the battery terminals to any other metal object (e.g., by carrying it in your pocket or purse with  
other metallic objects such as coins, clips and pens). This can short circuit and critically damage the battery.  
• Don’t leave the battery in hot or cold temps. Otherwise, it could significantly reduce the capacity and lifetime  
of the battery.  
• Don’t dispose of the battery into a fire.  
141  
SAFETY  
Lithium ion batteries are recyclable. When you replace your built-in battery, please request the repair center to  
recycle the battery in accordance with RBRC standards. When disposing of the battery by yourself, please call  
RBRC at (800) 822-8837 for proper disposal tips.  
Never touch any fluid that might leak from the built-in battery. Such liquid when in contact with the eyes or  
skin, could cause injury to the skin or eyes. Should the liquid come into contact with the eyes, irrigate the eyes  
thoroughly with clean water and immediately seek medical attention. In the event the liquid comes into contact  
with the skin or clothing, wash it away immediately with clean water.  
ADAPTER/CHARGER  
CHARGER  
The charger designed by UTStarcom for this unit requires the use of a standard 120 V AC power source for its  
operation.  
Never attempt to disassemble or repair a charger.  
Never use a charger if it has a damaged or worn power cord or plug. Always contact a UTStarcom authorized  
service center, if repair or replacement is required.  
Never alter the AC cord or plug on your charger. If the plug will not fit into the available outlet, have a proper  
outlet installed by a qualified electrician.  
Never allow any liquids or water to spill on the charger when it is connected to an AC power source. Always  
use the authorized UTStarcom charger to avoid any risk of bodily injury or damage to your cellular phone or  
battery.  
Never attempt to connect or disconnect the charger with wet hands. Always unplug the charger from the  
power source before attempting any cleaning. Always use a soft cloth dampened with water to clean the  
equipment, after it has been unplugged.  
Handling the cord on this product or cords associated with accessories sold with this product, will expose you to  
142  
SAFETY  
lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands  
after handling. Always disconnect the charger from the power source when it is not in use.  
RECYCLE YOUR CELL PHONE!  
Carriers marketing this cell phone have an in-store phone take-back program. Consumers can drop off their  
used wireless devices to specified carrier retail outlets for recycling purposes. For a list of carrier members and  
collection sites, visit the cellular industry’s recycling website www.recyclewirelessphones.com.  
To mail in your old wireless device to UTStarcom Personal Communications for recycling purposes, simply  
package your old wireless device and any accessories (including discharged batteries) in appropriate shipping  
materials and mail to:  
For Recycling UTStarcom Personal Communications LLC 555 Wireless Blvd. Hauppauge, NY 11788  
®
®
Wireless phones also can be donated to the Wireless Foundation’s DONATE A PHONE CALL TO PROTECT  
campaign. This charitable cause collects wireless phones to benefit victims of domestic violence. All donated  
phones are tax deductible. You may mail the phone to:  
CALL TO PROTECT2555 Bishop Circle WestDexter, MI 48130 -OR-  
Drop the phone off at a local collection center. For a list of collection centers, visit www.wirelessfoundation.  
org/CalltoProtect/dropoff.cfm  
© 2007 UTStarcom Personal Communications LLC. All rights reserved. UTStarcom is a registered trademark and the UTStarcom  
logo is a trademark of UTStarcom, Inc. and its subsidiaries.  
VIRGIN and the Virgin Signature logo are registered trademarks of Virgin Enterprises Limited and are used under license.  
Bluetooth is a trademark of Bluetooth SIG, Inc. Trademarks are owned by Bluetooth SIG, Inc. All other trademarks are the  
property of their respective owners.  
143  
SAFETY  
FCC HEARING-AID COMPATIBILITY (HAC) REGULATIONS  
FOR WIRELESS DEVICES  
THIS PHONE HAS A HAC RATING OF M3  
On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309  
modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require  
digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable  
access to telecommunications services for persons with hearing disabilities.  
While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users  
may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this  
interference noise, and phones also vary in the amount of interference they generate.  
The wireless telephone industry has developed a rating system for wireless phones to assist hearing device  
users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones  
that are rated have the rating on their box or a label located on the box.  
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your  
hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully.  
Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to  
hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.  
Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help  
you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. The  
hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for  
normal use. A sum of 6 is considered for best use.  
144  
SAFETY  
In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level  
rating, the sum of the two values equal M5. This should provide the hearing aid user with “normal usage” while  
using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a signal  
quality that is acceptable for normal operation.  
The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the  
UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions  
(ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement  
procedure are described in the American National Standards Institute (ANSI) C63.19 standard.  
For information about hearing aids and digital wireless phones  
Fcc Hearing Aid Compatibility and Volume Control  
http://www.fcc.gov/cgb/dro/hearing.html  
Gallaudet University, RERC  
http://tap.gallaudet.edu/DigWireless.KS/DigWireless.html  
Self Help for Hard of Hearing People Inc. [SHHH]  
ww.hearingloss.org/hat/TipsWirelessPhones.htm  
The Hearing Aid Compatibility FCC Order  
http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-168A1.pdf  
145  
SAFETY  
FCC COMPLIANCE INFORMATION  
This device complies with Part 15 of FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received.  
Including interference that may cause undesired operation.  
INFORMATION TO USER  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
- Consult the dealer or an experienced radio/ tv technician for help.  
CAUTION: The user who makes changes or modifications to the unit without the express approval by the  
manufacturer will void user authority to operate the equipment.  
146  
MEMO  
147  
MEMO  
148  

Maxtor RPM 4200 User Manual
Kenwood NB 77 User Manual
Kalorik Team International Group Coffeemaker USK CM 17442 User Manual
JVC KD LX30R User Manual
IBM 48X User Manual
DeLonghi Coffeemaker ESAM6900 User Manual
Cuisinart DCC 450CN User Manual
Craftsman 770 5875B User Manual
Blackberry Pearl 8100 User Manual
Aluratek Hurricane ACBS350500F User Manual