THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Before a phone model is available for sale to the
public, it must be tested and certified by the FCC that
it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required
by the FCC for each model.
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the U.S.
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements. While there may be
differences between the SAR levels of various phones
and at various positions, they all meet the
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based
on standards that were developed by independent
scientific organizations through periodic and
thorough evaluation of scientific studies. The
standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is
on file with the FCC and can be found under the
Display Grant section www.fcc.gov/oet/ea after
searching on the FCC ID: OVFKWC-K3801 (dual
band) or OVFKWC-K3802 (tri-band).
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power level
in all tested frequency bands.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a wireless base station
antenna, the lower the power output.
User Guide
3
Bluetooth® Certification
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
If you have any reason to suspect that
interference is taking place, turn off your
phone immediately.
For information about E1100Bluetooth Certification,
visit the Bluetooth Qualification Program Web site at
qualweb.bluetooth.org.
Caution
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to
discuss alternatives.
The user is cautioned that changes or modifications
not expressly approved by the party responsible for
compliance could void the warranty and user’s
authority to operate the equipment.
Optimize your phone’s performance
Other medical devices—If you use any other
personal medical device, consult the manufacturer of
the device to determine if it is adequately shielded
from external RF energy. Your physician may be able
to help you obtain this information.
Use the guidelines in this user guide to learn how
to optimize the performance and life of your
phone and battery.
Air Bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over the
air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals and
health care facilities may be using equipment that is
sensitive to external RF energy.
Potentially unsafe areas
Medical devices
Posted facilities—Turn your phone off in any
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The phone
should be kept at least six (6) inches away from the
pacemaker to reduce risk.
facility when posted notices require you to do so.
Vehicles—RF signals may affect improperly installed
or inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer of the device
to determine if it is adequately shielded from external
RF energy.
The Health Industry Manufacturers Association and
the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
Blasting areas—Turn off your phone where blasting
is in progress. Observe restrictions, and follow any
regulations or rules.
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
4
Accessories
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Radio Frequency (RF) energy
They include:
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
•
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or chemicals
vehicles using liquefied petroleum gas, such as
propane or butane
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure guidelines
with safety levels for hand-held wireless phones.
These guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies in the
•
any other area where you would normally be
advised to turn off your vehicle engine
Use with care
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on the phone.
following reports:
Avoid magnetic environments
•
•
•
ANSI C95.1 (American National Standards
Institute, 1992)
NCRP Report 86 (National Council on Radiation
Protection and Measurements, 1986)
ICNIRP (International Commission on
Non-Ionizing Radiation Protection, 1996)
Keep the phone away from magnets which can cause
improper functioning of the phone.
Keep phone dry
Keep phone dry. Damage can result if the phone gets
wet. Water damage is not covered under warranty.
Resetting the phone
Your phone complies with the standards set by these
reports and the FCC guidelines.
If the screen seems frozen and the keypad does not
respond to keypress, reset the phone by completing
the following steps:
1. Remove the battery door.
2. Remove and replace the battery.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
If the problem persists, return the phone to the
dealer for service.
User Guide
5
Hearing Aid Compatibility (HAC) with
Mobile Phones
Hearing devices may also be measured for immunity
to this type of interference. Your hearing device
manufacturer or hearing health professional may
help you choose the proper rating for your mobile
phone. The more immune your hearing aid is, the
less likely you are to experience interference noise
from mobile phones.
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user.
Some hearing devices are more immune than others
to this interference noise, and phones also vary in the
amount of interference they generate.
For more information about hearing aid
compatibility, visit the FCC's Consumer &
Governmental Affairs Bureau Web site at
www.fcc.gov/cgb/dro.
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all
phones have been rated.
Kyocera Wireless Corp.
www.kyocera-wireless.com
Phones that are rated have the rating on their box or
a label on the box. The ratings are not guarantees
and results will vary depending on the user’s hearing
device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may
not be able to use a rated phone successfully. Trying
out the phone with your hearing device is the best
way to evaluate it for your personal needs.
To purchase accessories, visit
M-Ratings—Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two
ratings.
T-Ratings—Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all
hearing devices have telecoils in them.)
6
Table of Contents
6
7
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Messaging . . . . . . . . . . . . . . . . . . . . . . . . 34
8
9
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . 46
4
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 25
User Guide
7
8
1
Get Started
Charge the Battery
You must have at least a partial charge in the
battery to make or receive calls.
Phone Battery
Install the Battery
To install the battery:
1. Hold the phone face
To charge the battery:
1. Connect the AC adapter
to the micro USB jack
on the side of the
phone.
down.
2. Find notch directly
above the back cover. It
is square. Use the notch
to slide the cover down.
Lift the cover from the
bottom to remove.
2. Plug the adapter into a
wall outlet.
The battery icon in the
upper-right corner of the screen tells you whether
the phone is:
3. Place the battery in the
battery casing with the
metal contacts facing
toward the bottom of
the phone. The metal
contacts of the battery
must make contact with
the metal contacts of
the battery casing.
–
–
–
Charging (the icon is animated)
Partially charged
Fully charged
You can safely recharge the battery at any time,
even if it has a partial charge.
Warning: The battery will not charge if you use
the phone while it is connected to an AC adapter.
4. Replace the battery
door by sliding the
Note: Before removing the battery, make sure the
phone is powered off.
notches into the openings on each side of the
battery casing.
5. Snap the cover into place.
User Guide
9
•
•
Replace the battery only with another qualified
battery. Use of an unqualified battery may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a replacement battery is compatible, contact
customer support.
Promptly dispose of used batteries in
accordance with local regulations and
recycle if possible. Do not dispose as
household waste.
Battery Safety Guidelines
•
Do not disassemble or open the battery.
•
Do not crush, bend, deform, puncture, or
shred the battery.
•
•
Do not attempt to insert foreign objects into
the battery.
Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
•
•
Supervise all battery usage by children.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.
•
Always keep the battery between 15 °C and 25
°C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a cooking
surface, iron, or radiator.
•
•
•
Never use any damaged battery.
Only use the battery for its intended phone.
•
Improper battery use may result in a fire,
explosion, or other hazard.
Only use the battery with a qualified charger.
Use of an unqualified battery charger may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about
whether a charger is qualified, contact
customer support.
Common Causes of Battery Drain
•
•
•
•
Playing games or using the Web.
Taking pictures with the flash on.
Keeping backlighting on.
Operating in digital mode when far away from
a base station or cell site.
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
•
Do not short-circuit the battery or allow
metallic conductive objects—such as
keys, coins, or jewelry—to contact the
battery’s terminals.
•
•
•
•
High earpiece and ringer volume settings.
Repeating sound, vibration, or lighted alerts.
10
Phone Battery
Attach the Lanyard
To attach the lanyard:
1. Hold the phone face down.
2. Find the notch directly above the back
cover. It is square. Use the notch to slide
the cover down. Lift the cover from the
bottom to remove.
3. Remove the battery.
Use the notch
directly below the
battery casing. It is a
half circle.
4. Thread the lanyard
through the upper
square notch’s hole.
5. Make sure the lanyard
catches on the hook
inside the hole.
6. Insert the battery.
7. Replace the battery door cover and snap
it into place.
User Guide
11
Phone Overview
Get to Know Your Phone
The phone is shown here in the open position.
1. Home screen.
2. Left softkey selects items that appear on the lower left of the
display. At the home screen, you can select Menu.
3. Navigation key scrolls through lists and text entry fields and
accesses the following shortcuts from the home screen.
–
–
–
–
Scroll left to launch Browser.
Scroll right to go to Tools > Voice Memo.
Scroll up to create a custom menu shortcut.
Scroll down to go to Recent Calls > All.
4. Send key starts or answers a call. Press once to activate
voice command, twice to display the All Calls list, and three
times to redial the last number dialed. Press and hold to
activate voice commands.
5. Speakerphone key activates the speakerphone and answers
incoming calls.
6. Keypad for entering numbers, letters, or symbols.
7. * Shift key changes the text mode in text entry.
8. 0 Next key cycles through word choices during text entry.
9. Right softkey selects items that appear on the lower right of
the display. At the home screen, you can select Contacts.
10. OK key selects a menu item or option. At the home screen,
you go to the main menu when you press the OK key.
11. End key turns the phone on and off, ends a call or browser
session, and returns you to the home screen.
12. Back key erases characters in text entry and returns you to the previous screen when navigating
through menus.
13. # Space key enters a space during text entry. Press and hold to activate or deactivate Silent mode.
12
Phone Overview
The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent
accidental key presses.
1. Camera lens.
2. Volume key raises or lowers ringer volume.
3. Camera key activates Camera mode. To activate camera mode,
press and hold the Camera key.
4. External screen displays time, caller ID, signal, and battery strength.
5. Lightpipe LED.
6. Jack for micro USB cable (sold separately).
7. Jack for a hands-free headset (sold separately).
Warning: Inserting an accessory into the incorrect jack will
damage the phone.
Lightpipe LED Behavior
Your phone’s light pipe LED displays different patterns depending upon the alert. You can disable the light
pipe LED, see “Set Light Pipe Behavior” on page 54.
New message
Incoming call
Missed call
In call
One flash. If you do not respond, your phone will flash again to remind you.
Heartbeat pulse. It will continue until you answer the phone or miss the call.
One flash. If you do not respond, your phone will flash again to remind you.
Wave pulse. It will continue until the call ends.
Alarm
Three flashes. It will continue until you respond to the alert.
Three flashes. It will continue until you respond to the alert.
One flash. It will continue until you respond to Bluetooth request.
One flash. It will continue until you charge the phone.
Scheduler
Bluetooth
Low battery
Charging
Wave pulse. Displays when the phone is being charged.
Note: Incoming emergency calls always activate the LED, even if you have disabled it.
User Guide
13
Screen Icons
These icons may appear on your phone’s screen.
The phone is operating in IS95 digital mode.
New text message.
New voice message.
New voice and text message.
New photo message.
The phone is operating in IS2000 (1X) digital
mode.
The phone is receiving a signal. You can make
and receive calls. Fewer bars indicate a weaker
signal.
New photo and voice message.
A call is in progress.
New photo and text message.
The phone has a high speed data connection.
New photo, voice and text message.
The phone is set to light up instead of ring.
The phone has a standard speed data
connection.
The phone is not receiving a signal. You cannot
make or receive calls.
The phone is set to vibrate or to vibrate and
then ring.
Content is DRM protected.
The speaker phone is turned on.
Position location is set to your service provider
and to emergency services.
Data service is available and active on your
phone. Check with your service provider for
availability.
Position location is set to emergency services
only.
(blinking) The phone is sending high-speed
data.
The phone is in camera mode.
The phone is set to auto answer.
(blinking) The phone is receiving high-speed
data.
The phone is in privacy mode or is accessing a
secure Web site.
Data service is available, but the phone is
dormant.
The alarm clock is set.
Bluetooth wireless technology is enabled (On).
The battery is fully charged. The more black
bars, the greater the charge.
Bluetooth wireless technology is disabled (Off).
The phone is roaming outside of its home
service area.
The phone is in airplane mode.
14
Phone Overview
Main Menu
The contents of the main menu are as follows:
Browser
Launches the Browser
Messaging
New Text Msg
New Pic Msg
Voicemail
Inbox
Browser Alerts
Sent Msgs
Outbox
Saved Msgs
Drafts
Msg Settings
Message Groups
Erase Msg
Settings
Bluetooth
Sounds
BREW Apps
Mobileshop
Settings
Contacts
View All
Add New
Groups
Speed Dial List
Voice Dial List
Erase Contacts
Contacts Count
Display
Help
Convenience
Voice Features
Accessories
Network
Security
Phone Info
Media Gallery
Images
Sounds
Delete All
Tools
Camera
Launches the Camera
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Stopwatch
Memopad
World Clock
Recent Calls
All
Incoming
Outgoing
Missed
Data
Erase Call List
Call Timer
Kilobyte Counter
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
User Guide
15
Guide Conventions
In this guide, the following conventions are used
when describing phone features.
Select means to press the Left softkey, Right
softkey or OK key to select an item seen on the
display. For example, “Select Menu” tells you to
physically press the left softkey to choose Menu
from the display.
Press means to press a phone key. For
example, “Press the Send key to make a phone
call” tells you to physically press the Send key
on your phone.
Scroll means to use the Navigation key to move
though a list on the display. For example, “Scroll
through your Contacts list to choose a contact”
means to physically press the Navigation key up
or down to scroll through the list on the display.
> (greater than symbol) tells you to select an
option from a menu or list. For example,
“Menu > Settings” means to:
1. Press the left softkey to select Menu.
2. Scroll to the Settings option.
3. Press the OK key to select Settings.
16
Guide Conventions
2
Call Features
This section describes call features such as
volume, holding calls, speed dialing and
other features.
Call Using a Contact
1. Select Menu > Contacts > View All to open
your contacts list.
2. Highlight a contact and press the Sendkey.
Power Phone Up
•
To turn your phone on, press the End key and
wait until the phone display lights up.
To turn your phone off, press and hold the
End key until the phone plays a musical chime
and turns off.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
•
Redial a Number
1. Press the Send key twice to open your
Make Phone Calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
call history.
2. Highlight a phone number or contact and
press the Send key.
Note: To redial the last number called, received
or missed, press the Send key three times.
When the phone has been idle for a time, it
changes to power save mode. When you see
“Power Save” on your phone’s screen, press
any key to return to normal operating mode.
Answer Phone Calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact’s
name appears. There are several ways you can
answer a phone call.
There are several ways you can make a
phone call.
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Answer Using Earpiece
Press the Send key.
User Guide
17
Answer Using Speakerphone
Use the Speakerphone
Press the Speakerphone key.
Your phone has a built-in speakerphone.
•
To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
To turn off the speakerphone, press the
Speakerphone key again.
Answer Using Flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data calls. For more
information, see “Enable Open to Answer” on
page 57.
•
Note: If you press the Speakerphone key during
an incoming call, you will answer the call.
End Phone Calls
To end a phone call press the End key.
Silence an Incoming Call
•
To silence the phone without answering the
call select Silence, press the Back key, or
press the Volume key.
To silence the phone and answer the call,
select Silence and then press the Send key.
Activate Voice Dialing
1. Press and hold the Send key.
2. Follow the prompts.
•
For more information, see “Voice Commands” on
Note: In the absence of voicemail, this feature
drops the call.
Volume Control
Use Speed Dialing
There are several ways to control the volume of
your phone.
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can use
speed dialing you must save a phone number as a
contact and assign a speed dial location to it. See
“Customize a Number” on page 27.
Adjust Volume during a Call
To adjust the earpiece volume during a call, press
the Volume key up or down.
To call a contact that has a speed dial location.
1. Enter the one- or two-digit speed
dial location.
2. Press the Send key.
18
End Phone Calls
Emergency Services
Call Emergency Service
You can call an emergency code, even if your
phone is locked or your account is restricted.
When you call, your phone enters Emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
To place dial an emergency code:
1. Enter your 3-digit emergency code.
2. Press the Send key.
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described.
Exit Emergency Services
When you have completed the emergency call:
1. Select Exit.
2. Select Exit again to confirm your choice.
Note: To determine who has access to
your location, see “Set Location Information” on
page 62.
User Guide
19
3
Text Entry
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in Numbers Only mode.
When entering a name for a contact, you’re in
Normal Alpha mode.
Text Entry Modes
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
The text entry screen has the following features:
Enter Numbers
•
To enter a number while in Numbers Only
mode, press a number key once.
1. Characters
remaining that you
can type. Allowed
length of messages
can vary depending
on your service.
•
To enter a number while in Normal Alpha or
Rapid Entry mode, press and hold a number
key until the number appears on the screen.
Enter Words Letter by Letter
2. Text entry fields.
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, French, or Portuguese,
accented letters are available.
3. Current capitalization setting.
4. Current text entry mode.
There are five text entry modes:
2. Wait for the cursor to move right and enter
Case Change
Numbers Only
Normal Alpha
Rapid Entry
Add Symbol
the next letter.
Note: To enter a space, press # Space key.
20
Text Entry Modes
Enter Words Quickly
Change Modes
When you press a series of keys using Rapid Entry
mode, your phone checks its dictionary of
common words and guesses at the word you are
trying to spell.
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in Normal Alpha mode, you must change to
numbers only mode, enter the numbers, and then
change back to Normal Alpha mode to complete
the address.
1. For each letter of the word you want, press
the key once. For example, to enter the word
“any” press the 2 > 6 > 9 keys.
To change text entry modes:
•
Press and hold * Shift key until the icon
for the mode you want appears at the top
of the screen.
2. If the word doesn’t match what you
want, press 0 Next key to look at other
word matches.
•
You can also select Options then select
a different mode.
3. When you see the word you want, press the
# Space key.
Note: You can change the default text entry mode
when creating a text message. For more
information, see “Set Default Text” on page 44.
Enter Symbols
While entering text in Normal Alpha mode, you
can enter symbols by pressing the 1 key until you
see the symbol you want. Using this method, you
have access to the following symbols:.
Change Capitalization
You can change capitalization at any time while
entering text.
.
@
?
!
-
,
&
:
‘
]
Press the * Shift key to choose upper or lower
case while in Normal Alpha mode.
To access the full set of symbols:
1. From the text entry screen select Options >
Add Symbol.
2. Scroll up or down to view the list of symbols.
3. Press the number key corresponding to the
symbol to enter it.
User Guide
21
Text Entry Quick Reference
This table gives instructions for entering letters, numbers, and symbols. For more information, see “Text
To..
Do this..
Enter a letter
Use Normal Alpha mode and press a key until you see the letter your
want.
Enter a number
Enter a symbol
Use Normal Only mode and press a key.
Use Normal Alpha mode and press the 1 key until you see the symbol
your want.
Enter a space
Press the # Spacekey.
Erase a character
Press the Backkey.
Erase all characters
Move the cursor right or left
Move the cursor up or down
Change text entry modes
Capitalize any letter
Lowercase any letter
Initial caps
Press and hold the Back key.
Scroll left or right.
Scroll up or down.
Press and hold the * Shift key.
In Normal Alpha mode, press the * Shift key. Choose uppercase.
In Normal Alpha mode, press the * Shift key. Choose lowercase.
In Normal Alpha mode, press the * Shift key. Choose sentence case.
Press the appropriate left or right softkey.
Select soft options on screen
22
Text Entry Quick Reference
4
Browser
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
5. When you have finished using the browser,
press the End key to exit.
Use Browser Options
You can configure your browser.
Note: You cannot receive incoming calls while
you are using the browser.
During an active browser session, select Options
and one of the following:
Launch Browser
•
•
•
Display Mode selects how the Web page is
displayed. Normal Screen configures the
content to fit on the screen. Wide Screen does
not fit the content to the screen.
Zoom Levels allows you to zoom into
a specific area of the page. This option
only appears when the Wide Screen mode
is active.
Map On shrinks the Web page to display the
full page on the screen. This allows you to
choose certain areas of the page to zoom into.
This option only appears when the Wide
Screen mode is active.
1. Select Browser. A message about airtime
fees appears every time you start the
browser. For more information about
how airtime is charged, contact your
service provider.
2. Select OK to continue. If this is the first time
you have connected to the Internet, a
message informs you that security is not yet
enabled for your browser.
3. Select Yes to enable security. When you are
connected, a browser home page appears. It
has a list of bookmarks and some browser
menu options at the bottom of the screen.
The lock icon appears in a secure session.
An underline and an arrow indicate that
there is more text. Scroll down to view more
text. Press the Back key to return to the
previous screen.
•
•
Forward moves to next page in your
navigation trail.
Back moves to previous page in your
navigation trail.
•
•
Home returns to the browser home page.
Add to Bookmarks saves the current page as
a bookmark for easy access.
4. To choose a site, scroll to the link and press
the OK key.
•
Bookmarks opens a list of your saved
bookmarks.
User Guide
23
•
•
Search opens the browser search page.
Send URL sends the URL of the current page
with a text message.
Go to URL...allows you to enter the URL of a
new page and go there.
Refresh reloads the current page.
History displays the pages you have visited.
Quit exits the browser.
More... > Show URL displays the entire URL
of the current page.
More... > Restart Browser relaunches
the browser.
More... > Clear IDs and Passwords
clears the browser cache of user names
and passwords.
Use a Bookmark
1. Select Menu > Browser.
2. Select OK to accept browser fees.
•
3. From your Web home page, select
Options > Bookmarks. A list of
bookmarks appears.
•
•
•
•
4. Select a bookmark.
Check Browser Alerts
Alerts received from a Web site are sent to
your Browser Alerts folder. To check them, do
the following:
•
•
1. Select Menu > Messaging >
Browser Alerts. This action launches
the browser inbox.
•
•
More... > Certificates displays certificates
used in the current browser session.
2. Select OK to accept browser fees.
3. Select an alert and follow the prompts.
More... > Save Items on the Page allows
you to save content from the current page to
your phone.
More... > Preferences allows you to change
the home page and other browser settings.
More... > About displays information about
your browser session.
Set Web Prompt
You can set a prompt to confirm the start or exit
of the browser. See “Set Web Alerts” on page 62.
•
•
Search for a Web Site
How you search for a Web site depends on your
service provider. For more information, contact
your service provider.
24
Search for a Web Site
5
Contacts
Use your phone’s contacts directory to store
information about a person or company. Each
contact entry can have up to six phone numbers,
two email addresses, two Web addresses, two
street addresses, and a space for notes.
–
–
Select Options > Send as vCard to send
contact as a vCard.
Select Options > Send All to send all
contacts to a Bluetooth device or a
connected printer.
–
Select Options > Contacts Menu to
access the Contacts menu.
View Contacts Directory
To view existing contacts in your phone:
Add Contacts
1. Select Menu > Contacts > View All.
Your contacts are listed alphabetically.
Add Contact from Home Screen
To add a contact to your Contacts directory:
2. Highlight a contact and do one of
the following:
1. From the home screen, enter a phone
–
–
Press the Send key to call the contact.
Press the OK key view the
number to save (include the area code).
2. Select Save > Save New Contact.
contact’s details.
3. Enter a name for the contact.
–
–
–
Select New to create a new contact.
Select Options > Call to call the contact.
Select Options > Send Text Msg to send
a text message.
Select Options > Send Pict Msg to send
a picture message.
Select Options > View Contact to view
the contact’s details.
Select Options > Edit Contact to edit
the contact.
4. Enter additional phone numbers, email
addresses, Web addresses and note, if
needed. Scroll up or down to move through
the contact fields.
–
–
–
–
5. When you are done entering information,
select Save.
Select Options > Erase Contact to call
the contact.
User Guide
25
Add Contact from Contacts Menu
To add a contact to your Contacts directory:
1. Select Menu > Contacts > Add New.
Customize Contacts
Edit Contact Details
To edit details of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, select Edit.
2. Enter a name for the contact. When you are
done scroll down to the next field.
3. Enter a primary number for the contact.
4. Enter additional phone numbers, email
addresses, Web addresses and note, if
needed. Scroll up or down to move through
the contact fields.
4. Edit or add phone numbers, email
addresses, Web addresses and notes.
Scroll up or down to move through the
contact fields.
5. When you are done entering information,
5. When you are done entering information,
select Save.
select Save.
Add Code or Extension
Customize a Name
When you save the phone number of an
automated service, you may include a pause to
stop dialing. For example, a pause where you
would wait to dial an extension.
To customize the name of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to
1. From the home screen, enter a
the name.
phone number.
4. Select Options and one of the following.
2. Select Options and a type of pause:
–
–
–
–
–
Ringer assigns a specific ringer to
the contact.
Msg Tone assigns a specific message
tone to the contact.
Picture assigns a specific picture to
–
Time Pause causes the phone to stop
dialing for two seconds.
–
Hard Pause causes the phone to
stop until you select Release while
making the call.
the contact.
3. Enter the remaining numbers and
Erase Contact deletes the contact. This
will erase the entire contact.
Send as vCard sends the contact as
a vCard.
select Save > Save New Contact.
4. Complete the contact and select Save.
26
Customize Contacts
Customize a Number
Customize an Email Address
To customize the email address of an
existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to an
email address.
To customize the number of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll
to a number.
4. Select Options and one of the following.
4. Select Options and one of the following.
–
–
–
Call calls the contact.
Send Text Msg sends a text message.
Send Pict Msg sends a
–
–
Send Text Msg sends a text message.
Send Pict Msg sends a
multimedia message.
multimedia message.
–
–
–
–
View Address displays the
email address.
–
Prepend displays the contact details
screen for you to change the number
(adding an area code) or other data
of the contact.
Add To Group adds the email address to
the business, personal or custom group.
Erase Address deletes email address
from the contact.
Secret / Not Secret makes the email
address secret. It will not appear on the
screen until the lock code is entered.
Send as vCard sends the contact as
a vCard.
–
Add Speed Dial adds the number to your
speed dial list.
–
–
View Number displays the number.
Erase Number deletes number from
the contact.
–
–
Secret / Not Secret makes the
number secret. It will not appear
on the screen until the lock code is
entered. Secret numbers can be
called without a lock code.
Customize an IM Address
To customize the IM address of an
existing contact.
–
–
–
Primary Number makes this number the
primary number for the contact.
Send as vCard sends the contact
as a vCard.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to an
Add To Group adds the number to the
IM address.
business, personal or custom group.
User Guide
27
4. Select Options and one of the following.
–
–
–
View Address displays the
street address.
Erase Address deletes street address
from the contact.
Send as vCard sends the contact
as a vCard.
–
–
View IM displays the IM address.
Erase IM deletes IM address from
the contact.
Customize a Web Address
To customize the Web address of an
existing contact.
Customize a Note
To customize the note of an existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a note.
4. Select Options and one of the following.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a
Web address.
4. Select Options and one of the following.
–
–
View Note displays the note.
Erase Note deletes note from
the contact.
–
Launch Web launches the Web browser
and goes to Web address.
Send Pict Msg sends a
–
–
–
Secret / Not Secret makes the note
secret. It will not appear on the screen
until the lock code is entered.
Send as vCard sends the contact as
a vCard.
multimedia message.
–
–
View Web displays the Web address.
Erase Web deletes Web address from
the contact.
–
Send as vCard sends the contact as
a vCard.
Assign Ringer to a Contact
To assign a ringer to a contact.
Customize a Street Address
To customize the street address of an
existing contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to a
street address.
3. At the contact details screen, scroll
to the name.
4. Select Options > Ringer > Assign Ringer
and a ringer from the list. Scroll to play
the ringers.
4. Select Options and one of the following.
28
Customize Contacts
Assign Picture to a Contact
To assign a picture to a contact.
Send a vCard
To send contact information as a message:
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to the
3. At the contact details screen, scroll to the
name and do one of the following:
contact name.
–
Select Options > Picture >
4. Select Options > Send as vCard >
Via Picture Msg, Via Bluetooth, or
To Printer.
Assign Picture > Camera Pictures.
Scroll to an image and select Select.
Select Options > Picture >
–
5. Complete the appropriate task to send
Take Picture Nowto take a new picture.
contact information.
Assign Number Type
Contact Groups
When you assign a number type, an icon is placed
in front of the contact number to specify the type
of number it is.
You can assign your contacts to groups. Your
phone comes with default groups. You can also
create your own groups.
1. Select Menu > Contacts > View All.
2. At the contacts directory, select a contact.
3. At the contact details screen, select Edit.
Create a Group
1. Select Menu > Contacts > Groups.
2. Select New.
4. Press down twice to scroll to the number
type dropdown and press the OK key.
3. Enter a name for the group, then select Next.
5. Select General, Work , Home,
Mobile, Pager or Fax. The appropriate
icon will appear next to the number in
your phone lists.
4. Select contacts from the list provided. A
check mark appears next to each
selection you make. You can also
remove checkmarks.
6. Select Save.
5. When you have chosen your contacts,
select Done.
Your new group appears the next time you
view your groups
User Guide
29
Use a Group
Contacts Directory
1. Select Menu > Contacts > Groups.
2. At the groups list, scroll to a group.
3. Select Options and one of the following:
To search your contacts directory:
Select Menu > Contacts and one of the following:
•
•
•
View All lists the entire contacts directory.
Groups lists existing groups.
Speed Dial List or Voice Dial List shows
contacts on the specified list.
–
–
–
–
–
View displays the group details.
Edit adds or removes group members.
Erase deletes the group.
Send Text Msg sends a text message.
Send Pict Msg sends a
To quickly get down the list, enter the first
letter of the contact. You will skip to that letter
of the alphabet.
multimedia message.
–
–
Send as vCard sends the group
as a vCard.
Create Msg Group creates a
message group.
Frequent List
With Frequent List enabled, you can see 15 of
your most frequently called contacts. See “Enable
Frequent List” on page 57.
Customize a Group
Fast Find
1. Select Menu > Contacts > Groups.
2. At the groups list, select a group.
3. Select Options and one of the following:
With Fast Find enabled, you can press one or two
keys to view close matches of the number. See
“Enable Fast Find” on page 57.
–
–
Ringer assigns a ringer to the group.
Msg Tone assigns a message tone
to the group.
Picture assigns a picture to the group.
Erase deletes the group.
Voice Search
You can use voice commands to find a contact in
your voice dial list. For more information, see
“Find Contacts” on page 80.
–
–
–
Edit adds or removes group members.
Search Contacts
To find a phone number or contact, you can
search the contacts directory, check the
Frequent List, or use Fast Find.
30
Search Contacts
Erase All Contacts
You can delete all your contacts.
Select Menu > Contacts > Erase Contacts and
one of the following:
•
Contacts Only deletes all contacts from
the phone.
•
Groups Only deletes groups you have
created from the phone. This does not
delete the contacts.
•
Erase All deletes both contacts and
groups from the phone.
Note: Deleted information can not be recovered.
Count Contacts
Check how many contacts you have stored.
Select Menu > Contacts > Contacts Count.
User Guide
31
6
Camera
Your phone comes with a camera. Before using
your phone’s camera, here are some tips:
The picture is saved to your camera
pictures folder.
•
You cannot activate the camera while on
an active call or while browsing files in the
media gallery.
4. Select Send to create a multimedia
message or Erase to delete the picture
from your phone.
•
•
•
Once the camera is active, the home screen
acts as the viewfinder.
You can also send the picture to a Bluetooth
device or a printer.
5. Press the End key to exit camera mode.
If you get a “Low memory” error, check your
resolution and quality compression settings.
If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
Change Camera Options
While in camera mode you can select one
of the following:
•
Menu settings and options can only be
accessed when the camera is active.
•
Options > Settings displays the
following settings you may set up prior
to taking a picture:
Take a Picture
To take a picture:
1. Activate the camera one of the
following ways:
–
–
Resolution adjusts the resolution.
Self Timer sets a self timer. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when Multishot mode is activated.
Date/Timeplaces a time stamp on
the picture.
Multishot allows you to take up to six
multiple pictures while the camera key is
pressed and held. A tone will play each
time a picture is taken.
–
Press and hold the Camera key.
–
Select Menu > Camera.
–
–
2. Focus on the image using the phone’s display
as a viewfinder. Scroll up or down to zoom in
and out.
3. Take a picture one of the following ways:
–
–
–
Press the OK key.
Press the Camera key.
Select Capture.
–
Shutter Sound sets the sound used when
the camera takes a picture.
32
Take a Picture
–
–
–
White Balance adjusts for
different lighting.
Color Tone sets the color tone of
Camera Indicators and Icons
The following information indicators and icons
may display on the screen when you are operating
the camera.
the picture.
Picture Quality sets the picture
compression. The higher the
compression, the better the detail of the
picture (higher pixel rate). When set
higher, the picture file size is larger, using
more memory.
Numbers in the top right corner indicate
the number of snapshots remaining.
Numbers in the bottom left corner
indicate the resolution setting for
pictures.
•
•
•
•
Options > Brightness adjusts the brightness
of the image in the home screen LCD.
Options > Camera Pictures displays all
pictures taken and stored.
Options > Last Picture displays the most
recently taken picture.
Options > Frames adds a frame or a stamp to
your picture. A frame or stamp cannot be
removed once it has been used in a picture.
The picture resolution may change while
taking pictures with frames. The resolution
returns to the original setting once Frames
is disabled.
Camera is in camera mode.
Multishot feature is on.
Self timer feature is on.
Date/Time stamp is on.
Note: The following settings will revert to
the default setting each time you exit the
camera application: Self Timer, Multishot and
Color Tone.
User Guide
33
7
Messaging
This chapter describes how to send, receive, and
erase messages from your phone.
Attach QuickText and other Extras
During text entry, you can attach items such as
prewritten text (QuickText) or symbols.
Note: The features and menus described in this
chapter may vary depending on services available
in your area. Check with your service provider for
details and possible usage charges.
1. From the text entry screen, select Options
and one of the following:
–
–
–
Insert QuickText inserts prewritten text
from a list.
Insert Note inserts memo created with
your memopad.
Add Symbol inserts a symbol. Press the
corresponding number to select a
symbol.
Text Messages
You can only send text messages to phones that
are capable of receiving them or to email
addresses.
Create a Text Message
1. Select Menu > Messaging > New Text Msg.
If you have enhanced messaging, you also
have the following options.
2. Enter a recipient’s phone number or email
–
–
–
Insert Picture inserts a picture.
Insert Sound inserts a sound.
Insert Contacts inserts a contact.
address:
–
Select Options > Recent List, Recent
Calls, Contacts, or Message Groups to
access your stored contacts.
2. Complete your message.
–
Enter a new address manually.
3. Select Send.
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses. If you select stored contacts, this
is done automatically. Scroll down to move
to the next field when done.
3. Enter the message.
4. Select Send.
34
Text Messages
Use Text Message Options
Retrieve a Text Message
When you create a text message, you have several
options to help you.
When a text message is received, your phone
displays a notification and the message icon
appears at the top of your screen. The message
icon flashes if the message is urgent. Urgent
messages are also marked in the Inbox.
1. From the message entry screen, select
Options and one of the following:
–
–
–
–
–
Add Address allows you to add
another recipient.
Save Address saves a recipient’s address
to your phone if it is new.
Save Message saves the messages in your
Message Notifications
If you see a message notification, select Inboxto
view messages and do one of the following:
•
•
Scroll to a message and select View to open it.
Select Ignore clear the message notification.
Drafts folder.
Save QuickText saves the message you
composed as a prewritten message.
Msg Settings > Msg Receipt alerts
you when a recipient has received
your message.
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. The older message is
in the Inbox.
–
–
Msg Settings > Set Priority labels the
message as urgent.
Msg Settings > Callback Number
includes a callback number with
the message.
Msg Settings > Send Later schedules a
time to send the message.
Msg Settings > Validity Periodsets
a defined expiration time limit for
a message.
Message Icons
1. If you see the message icon, select
Menu > Messaging > Inbox.
2. Scroll to a message and select View
to open it.
–
–
View a Text Message
The options available when viewing a text message
may vary. Check with your service provider.
1. Select Menu > Messaging > Inbox.
2. After setting options, select Close
your message.
2. Select a message to view. If the message is
long, scroll down to view entire message.
3. Complete your message.
4. Select Send.
User Guide
35
3. Select Reply to create a response message or
Multimedia Messages
Options and one of the following.
You can only send multimedia messages to
phones that are capable of receiving them or to
email addresses. Multimedia messages have a
predetermined character and file size limit. When
you reach the character and file size limit for a
single multimedia message, you must edit the
message to meet the size limitation.
–
–
–
Erase deletes the message.
Forward forwards the message.
Reply with Copy replies to the message
with a copy of the original attached.
Save Message saves the message to the
Saved Messages folder.
Save as QuickText saves the message
text as QuickText, which can be
inserted into other messages.
–
–
Note: Multimedia messaging is not available on
all phones. Check with your service provider.
Create a Multimedia Message
Graphics are not saved.
1. Select Menu > Messaging > New Pic Msg.
–
–
Sender displays the sender information.
Lock Msg / Unlock Msg protects the
2. Enter a recipient’s phone number or
message from being accidentally deleted.
email address:
–
If you have received an enhanced
message, you also have the following
options:
–
Select Options > Recent List,
Recent Calls, Contacts, or
Message Groups to access your
stored contacts.
Select Options > Online Album to send
a file to a Web location.
–
–
–
–
Play / Stop plays or stops a sound.
Save Object saves an image or sound.
Save Contact saves a contact.
–
–
Enter a new address manually. Scroll
down to move to the next field when
done. Repeat the procedure for the CC
and BCC fields. You can message up to
ten recipients at once. Use comma or
spaces to separate addresses. If you
select stored contacts, this is done
automatically.
Launch Browser launches the browser.
Note: If a graphic is too large or incorrectly
formatted and is not received with the message,
an icon appears.
3. Enter a subject. Scroll down to move to the
next field when done.
36
Multimedia Messages
4. Enter a message. Scroll down to move to the
–
–
Insert Contacts adds a contact to
the message.
Insert QuickText adds prewritten text to
next field when done.
5. Attach an image file:
the message.
–
Select Options > Take a Picture to take
–
–
Preview Message plays the message.
Save as QuickText saves the message
text as QuickText, which can be
inserted into other messages.
Graphics are not saved.
Save Message saves the message to your
Drafts folder.
Add Address adds additional recipients
to the message.
Save Address saves a recipient’s address
to your phone if it is new.
Msg Settings > Msg Receipt alerts
you when a recipient has received
your message.
a photo and attach it.
–
Select Options > Media Gallery to
attach an existing file.
Scroll down to move to the next field
when done.
–
–
–
–
6. Attach a sound file:
–
Select Options > Record Sound to
record a sound and attach it.
Select Options > Media Gallery to
attach an existing file.
–
7. Select Send.
Use Multimedia Message Options
When you create a multimedia message, you have
several options to help you.
–
–
–
Msg Settings > Set Priority labels the
message as urgent.
Msg Settings > Send Later schedules a
time to send the message.
Msg Settings > Slide Interval sets
how fast the message moves from slide
to slide.
1. From the message entry screen, select
Options and one of the following:
–
–
–
Remove Image removes file from
the message.
Remove Sound removes file from
the message.
Add New Slide adds a new slide to the
message.
2. After setting an option, press the Backkey to
return to the message window if necessary.
3. Complete your message.
–
–
–
Previous Slide edits the previous slide.
Next Slide edits the next slide.
Erase Slide erases the current slide.
4. Select Send.
User Guide
37
Note: If a multimedia message is received during
a call, the phone displays a notification after the
call ends.
Retrieve a Multimedia Message
There are two modes for receiving a multimedia
message on your phone: Auto retrieve (default)
and Prompt. To control this setting, see “Enable
Auto Retrieve” on page 43.
View a Multimedia Message
When a multimedia message is received, the
message icon appears at the top of your screen.
The message icon flashes if the message is urgent.
All notifications or messages are stored in the
Inbox regardless of your auto receive settings.
Auto Retrieve Mode
When a message is received, it is
automatically downloaded onto your phone.
A notification appears when a new message
has been downloaded to your phone. Select
one of the following:
1. Select Menu > Messaging > Inbox.
2. Select a message to view. If the message is
•
•
View opens the message.
Later views the message at another time. It is
stored in the Inbox.
long, scroll down to view entire message.
3. Select Reply to create a response message or
Options and one of the following.
Note: If a message is received during a call, then
the phone downloads the message approximately
one minute after the last key is pressed.
–
Reply All replies to all recipients
of the message.
Erase deletes the message.
Recipients displays the recipients
of the message.
–
–
Prompt Mode
When a multimedia message is received, it is
not automatically downloaded onto your phone.
A notification appears when a new message
is available for download. Select one of
the following:
–
–
Mute / Unmute silences the message.
Forward launches the message creation
screen, allowing you to forward the
message. The original address will not
be shown, nor will the graphic, sound,
and text fields.
Message Info displays message
information (priority, sender,
subject, time sent and received,
and message size).
•
•
View downloads and opens the message.
Erase deletes the message,
–
without downloading.
•
Later downloads the message to the Inbox.
38
Multimedia Messages
–
Replay plays the message again from
the beginning.
Voicemail
Configure your Voicemail
Before your phone can receive voicemail
–
–
Call initiates call to sender of message.
Save Picture saves the currently viewed
messages, you must set up a password and record
a personal greeting with your service provider.
picture embedded in the message.
Save Sound saves the current sound
embedded in the message.
Save Address extracts email addresses,
phone numbers, and/or URLs from the
sender information and message body.
Save as QuickText saves the message
text as QuickText, which can be
inserted into other messages.
–
–
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
–
1. Press and hold the 1 key.
2. Follow the system prompts to create a
password and record a greeting.
Graphics are not saved.
Check your Voicemail
–
–
–
Save Message saves the message to the
Saved Messages folder.
When a voice message is received, your screen
displays a notification along with a voicemail
message icon at the top of your screen. The
symbol flashes if the message is urgent.
Lock Msg / Unlock Msg protects the
message from being accidentally deleted.
If a message contains more than one
slide, the following options are also
available:
•
If you see a notification:
a. Select Call, which initiates a call to your
voicemail number.
b. Follow the system prompts to retrieve
–
–
–
Next moves to the next slide.
Done exits the message.
Pause / Resume pauses or continues the
the message.
message slides.
To clear the screen without checking
messages, select Ignore.
•
If you only see the voicemail message icon:
a. Select Menu > Messaging > Voicemail.
b. Follow the system prompts to retrieve
the message.
User Guide
39
Note: You can set the phone to beep or vibrate
every five minutes to remind you that you have
voicemail. For more information, see “Set Alerts”
on page 42.
Work with Messages
Here are some tips about messaging with
your phone.
Unable to Send Messages
Erase Messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
It is a good idea to erase old messages to free up
memory in your phone. You can erase messages
and pages as you send or read them, erase them
one at a time, or erase them all at once.
Erase a Single Message
1. Select Menu > Messaging > Inbox,
Appended Messages
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
Sent Msgs, Outbox, Saved Msgs or Drafts.
2. Scroll to the message you wish to erase.
Warning: Your service provider will charge you
for each message segment.
3. Select Options > Erase.
4. You will see a notification. Select Yes to
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down as
you enter characters, until it reaches 0.
erase the message.
Note: You can erase a scheduled message, but
you cannot cancel delivery of the message.
Erase All Messages
If you continue to enter text after this counter
reaches 0, a message segment may be appended.
When you reach the message size limit, you are
prompted to edit the message or alerted that the
message is being appended.
1. Select Menu > Messaging > Erase Msg >
Inbox, Outbox, Sent Msgs, Saved Msgs,
Drafts or All.
To erase messages from all folders,
select All.
Note: Not available on all phones. Check with
your service provider.
2. You will see a notification. Select Yes to
erase the messages.
40
Erase Messages
Incoming Calls while
Creating Messages
If you receive a call while receiving a message
you will receive a notification. You can do
the following:
The scheduled message will be sent at
the scheduled time. You cannot cancel
delivery of the message.
The message was sent. You cannot
cancel delivery of the message.
•
SelectIgnore to not answer the call. You will
return to the message screen.
The message has been received.
•
Press the Send key to answer the call. The
message will be saved to the Drafts folder.
The message has been sent to more
than one recipient.
Complete Messages in Drafts Folder
To continue composing a message in the
Drafts folder:
View Failed or Pending Messages
Failed or pending messages are stored in your
Outbox. To view messages in the Outbox:
•
•
•
•
•
SelectMenu > Messaging > Drafts.
Select the message your wish to complete.
SelectEdit.
Complete your message.
SelectSend.
Select Menu > Messaging > Outbox.
Your list of failed or pending messages will
appear with the following symbols
The message is pending and will be
sent when possible. You can cancel
delivery of the message.
View Sent Messages
To view messages in the Sent Messages folder:
Select Menu > Messaging > Sent Msgs.
Your list of saved messages will appear with the
following symbols
The message cannot be sent because
service is not available. An alert
appears on your phone if the message
cannot be sent.
User Guide
41
Set Signature
Message Settings
The signature you create is included at the end of
all outgoing messages and is counted as
characters in your messages; however, it does not
appear in the message creation screen.
1. Select Menu > Messaging >
Messaging settings configure your phone for
voice, text, multimedia messages.
Set Alerts
Choose how you want be alerted of messages,
pages, and voicemail.
Msg Settings > Signature.
1. Select Menu > Messaging >
Msg Settings > Alerts > Msg Alert,
Page Alert, or Voice Alert.
2. Enter your signature in the text field.
3. Select OK to save the signature.
Note: The characters in the signature
are included in the total character count of
the message.
2. Select an alert.
If you select an alert with an & Remind, the phone
notifies you once when a new message is received
and then notify you again every five minutes. To
stop a reminder alert, select Ignore.
Edit QuickText
Your phone comes with prewritten (QuickText)
messages, such as “Please call me,” which you
can insert into the body of a text message. You
can edit these messages or create new ones. Your
phone stores up to 40 QuickText messages, with
up to 100 characters per message.
1. Select Menu > Messaging >
Msg Settings > Edit QuickText and
do one of the following:
Set Message List View
You can set how your phone displays your
message list.
Select Menu > Messaging > Msg Settings >
Msg List View and one of the following:
•
•
•
Msg Preview displays first part of message.
Sender displays who sent the message.
Sender & Preview displays sender and first
part of message.
–
Scroll to a QuickText message and
select Edit.
–
Select New Msg to create a new
QuickText message.
•
Sender & Date/Time displays sender and
when message was sent.
2. Enter or edit the text.
3. Select Save.
Note: You can also save a message you have
written or received as QuickText.
42
Message Settings
Enable Auto Retrieve
Enable Save to Sent
To set your phone to auto retrieve
multimedia messages.
You can save your outgoing messages.
Select Menu > Messaging > Msg Settings >
Select Menu > Messaging > Msg Settings >
Save to Sent and one of the following:
Auto Retrieve and one of the following:
•
•
Disabled does not save outgoing messages.
Prompt allows you to choose whether or not
to save your message when you send it.
Enabled saves all outgoing messages to the
Sent folder.
•
Disabled turns off auto retrieve. You will be
prompted before any multimedia messages
are download.
•
•
Enabled turns on auto retrieve.
Enable CC/BCC Fields
Enable Auto-Erase
To show or hide the CC and BCC fields when you
compose a multimedia message.
You can set your phone to erase message
automatically when memory is needed for
incoming messages.
Select Menu > Messaging > Msg Settings >
CC and BCC and one of the following.
Select Menu > Messaging > Msg Settings >
•
•
Disabled hides the CC and BCC fields.
Enabled shows the CC and BCC fields.
Auto-Erase and one of the following:
•
•
Disabled erases no messages.
Inbox Msgs erases old messages in your
Inbox when memory is needed.
Set Callback Number
Set a callback number to let recipients know a
number where they can call you back.
•
•
Sent Msgs erases old messages in your Sent
folder when memory is needed.
Both erases old messages in both your Inbox
and Sent folders when memory is needed.
1. Select Menu > Messaging >
Msg Settings > Callback Number.
2. Enter number in the text field.
3. Select OK to save the number.
User Guide
43
Set Default Text
Set Voicemail Number
You can change the default text entry mode when
creating a text message. This setting applies only
to the message body screen, not the “To” screen.
Set the number your phone calls to
retrieve voicemail. Often your voicemail
number is automatically programmed by
your service provider.
Select Menu > Messaging > Msg Settings >
Default Text and one of the following:
1. Select Menu > Messaging >
Msg Settings > Voicemail Number.
2. Select Edit.
•
•
Normal Alpha enter text in letter by letter.
Rapid Mode enter text with word recognition.
3. Enter number in the text field.
Use Options > Time Pause or
Hard Pause to enter pauses.
Request Message Receipts
Request a notification when a recipient has
received a text or multimedia message.
4. Select Save.
Select Menu > Messaging > Msg Settings > Text
Msg Receipt or Pic Msg Receipt and one ofthe
following:
Erase Recent List
Clears recent list of message recipients from your
phone. Select Menu > Messaging >
•
•
Don’t Request to not request a notification.
Request to request a notification.
Msg Settings > Erase Recent List > Yes.
Note: To receive a message receipt, you must save
outgoing messages to the Sent folder.
Request Message Read Receipts
Request a notification when a recipient has
received and read a text or multimedia message.
Select Menu> Messaging > Msg Settings > Text
Msg Read Receipt or Pic Msg Read Receipt and
one of the following:
•
•
Don’t Request to not request a notification.
Request to request a notification.
Note: To receive a message receipt, you must save
outgoing messages to the Sent folder.
44
Message Settings
Customize a Group
1. Select Menu > Messaging >
Message Groups
You can create groups for messaging.
Message Groups.
Create a Group
1. Select Menu > Messaging >
2. At the groups list, select a group.
3. Select Options and one of the following:
Message Groups.
–
–
Ringer assigns a ringer to the group.
Msg Tone assigns a message tone to
2. Select New.
3. Enter a name for the group, then select Next.
the group.
4. Select contacts from the list provided.
A check mark appears next to each
selection you make. You can also
remove checkmarks.
–
–
–
Picture assigns a picture to the group.
Erase deletes the group.
Edit adds or removes group members.
5. When you have chosen your contacts,
select Done.
Use a Group
1. Select Menu > Messaging >
Message Groups.
2. At the groups list, scroll to a group.
3. Select Options and one of the following:
–
–
–
–
–
View displays the group details.
Edit adds or removes group members.
Erase deletes the group.
Send Text Msg sends a text message.
Send Pict Msg sends a
multimedia message.
–
Send as vCard sends the group as
a vCard.
User Guide
45
8
Recent Calls
3. Press the Send key to call the number or
Call Lists
Details on the calls you made, received, or missed
are stored in the recent call lists and are identified
by the following icons:
select Options and one of the following.
–
–
–
Save creates a new contact.
View displays the contact details.
Send Text Msg sends a text message to
the number.
Send Picture Msg sends a multimedia
message to the number.
Erase Record deletes the call from the
Outgoing call
Incoming call
–
–
call list
Note: If the phone number is classified as
“secret,” you must enter your four-digit lock code
to view or edit it.
Missed call (flashing)
View Call Lists
1. Select Menu > Recent Calls and one of
Deal with a Missed Call
When you have missed a call, “Missed Call”
appears on your screen. You can do one of
the following:
the following:
–
–
–
–
All to view all calls made or received.
Incoming to view calls received.
Outgoing to view calls made.
•
•
To clear the screen, select OK.
To view the call details, select Calls and press
the OK key.
Missed to view calls received, but
not answered.
•
To return the call, select Calls and press the
Send key.
–
Data to view data calls.
2. Highlight a recent call.
You can set an alert to beep every five minutes
after you have missed a call. See “Set Missed Call
Alert” on page 57.
46
Call Lists
Your phone can alert with a short beep ten
seconds before each minute passes during a call.
For more information, see “Enable Minute Alert”
on page 57.
Erase Call Lists
You can erase your phone’s call lists.
1. Select Menu > Recent Calls >
Erase Call List > All, Incoming,
Outgoing, Missed, or Data Call.
2. Select Yes.
View Data Counter
Your phone tracks the kilobytes you have received
and sent during data calls.
Select Menu > Recent Calls > Kilobyte Counter
to view your data call information. To reset this
counter to zero, select Options > Reset.
View Call Timers
Select Menu > Recent Calls > Call Timer and
one of the following:
•
All Calls tracks all calls you have made and
You cannot redial a data call from this list.
received. This timer cannot be reset.
•
Recent tracks all calls you have made and
received since you last reset this timer. To
reset this timer to zero, select Reset.
Home tracks all calls you have made and
received in your home network since you last
reset this timer. To reset this timer to zero,
selectReset.
•
•
•
•
Roam tracks all roaming calls you have made
and received since you last reset this timer. To
reset this timer to zero, select Reset.
Incoming tracks all incoming calls you have
received since you last reset this timer. To
reset this timer to zero, select Reset.
Outgoing tracks all outgoing calls you have
made since you last reset this timer. To reset
this timer to zero, select Reset.
User Guide
47
9
Settings
Settings Menu
The contents of the settings menu are as follows:
Bluetooth
On/Off
My Devices
Settings
Display
Voice Features
Automatic Add
Expert Mode
Display Results
Digit Lengths
Voice Answer
Voice Wake-up
Voice Training
Network
Data Calls
Set Wallpaper
Wallpaper Shuffle
Set Screensaver
Themes
Main Menu View
My Banner
Backlighting
Lightpipe Behavior
Brightness
Privacy Alert
Voice Privacy
Roam/Svc Alert
Roam Option
Set Phone Line
Location
Sounds
Ringers
Ringer Mode
Volume
Flip Sounds
Pwr On/Off Sound
Keypad
Web Alert
Roam Call Alert
Accessories
Headset Sounds
Auto-Answer
TTY Device
Com Port Speed
T-coil Hearing Aid
Language
Time/Date Format
External Display
Security
Lock Phone
Limit Calls
ICE Numbers
Erase Contacts
New Lock Code
Convenience
Airplane Mode
Auto-Hyphen
1-Touch Dialing
Hold Call
Fast Find
Frequent List
Minute Alert
Phone Info
Build Info
Icon Key
User Guide
Missed Call Alert
Open to Answer
Any Key Answer
Note: The menu items on your phone can change depending on the services provided by your service
provider. Check with your service provider.
48
Settings Menu
Enable Bluetooth
You must turn on your phone’s Bluetooth feature
to use it with Bluetooth devices.
Create a Custom Menu
1. From the main screen, scroll up and hold.
2. Select Edit.
Select Menu > Settings > Bluetooth > On/Off
and one of the following:
3. Select features from the list provided.
A check mark appears next to each
selection you make. You can also
remove checkmarks.
•
•
•
On Visible allows other devices to find
your phone.
On Invisible hides your phone for all devices
except those listed in your My Devices.
Off prohibits your phone from being used
with any Bluetooth wireless technology device.
To prolong battery life, it is recommended to
turn Bluetooth off when you are not using it.
4. When you have chosen your menu options,
select Save.
Your new selection appears the next time you
select your custom menu.
Bluetooth
When you turn Bluetooth on the first time, you
will be prompted to do a device search. You can
immediately pair with a device.
The Bluetooth® wireless technology on your
phone enables wireless connectivity with
accessories such as portable or installed
hands-free car kits, headsets, handsets,
computers, PC cards and adapters, PDAs,
and speakers.
Bluetooth Pairing
You must first “pair” your phone with the
Bluetooth device to allow your phone to
communicate with it. Refer to the instructions
for setting up Bluetooth (below) in conjunction
with the user guide provided with your
Bluetooth device.
Not available on all phones. For details check with
your service provider.
You must use a Bluetooth device (compatible
with Class 2 Bluetooth wireless technology,
version 1.2) in order to use this phone wirelessly.
Bluetooth accessories are noted with a symbol.
1. Select Menu > Settings > Bluetooth >
On/Off > On Visible or On Invisible.
2. Prepare the Bluetooth device or accessory
for pairing as described in the other device’s
user guide.
3. Select Menu > Settings > Bluetooth >
My Devices > Find New.
User Guide
49
4. Your phone will search and detect visible
Disconnect from a Device
To disconnect your phone from an audio
Bluetooth device:
Bluetooth devices in the vicinity.
5. At the device list, highlight a device and
select Add.
1. Select Menu > Settings > Bluetooth >
When pairing is initiated from another
Bluetooth device, you will be prompted to
accept or reject the pairing.
My Devices.
2. At the device list, highlight a connected
device and select Disconnect.
6. If necessary, enter the password provided
in the Bluetooth device’s user guide and
select OK.
Bluetooth Device Options
You can change or review the information about
each device you paired with your phone.
Your phone waits for the device’s response. If the
password is accepted the device is added to your
device list.
1. Select Menu > Settings > Bluetooth >
My Devices.
2. At the device list, highlight a device, select
Use Bluetooth
Options and one of the following:
Before you can use the Bluetooth audio
functions of your phone, you must set your
phone to be ready to communicate with a
device. This is called “connecting.”
–
–
Rename renames the device.
Delete removes the device from
your phone if you are no longer
going to use it.
–
Services displays description of the
device (such as Headset, Handsfree,
Object Push, and Serial Port).
Connect to a Device
To connect your phone to an audio
Bluetooth device:
1. Select Menu > Settings > Bluetooth >
My Devices.
2. At the device list, highlight a device and
select Connect.
A notification appears confirming the connection.
You can now use the device with your phone.
50
Bluetooth
Enable Roam Ringer
Bluetooth Settings
Your phone can alert you to roaming calls with a
specific ringer.
You have settings for how your phone interacts
with Bluetooth devices.
Select Menu > Settings > Sounds > Ringers >
Roam Ringer > Enabled.
Select Menu > Settings > Bluetooth > Settings
and one of the following:
•
•
•
•
My Name changes the name of your phone to
identify to other devices it is paired with.
Visible Durationsets the time your phone
remains visible to other devices.
Services shows the list of the Bluetooth
protocol supported by your phone.
OBEX Authentication enables or disables
OBEX authentication.
Enable Ringer Shuffle
You can set your phone use a different ringer
every time you receive a call.
Select Menu > Settings > Sounds > Ringers >
Ringer Shuffle and one of the following:
•
Enable / Disable turns the ringer shuffle
on or off.
•
•
Edit adds or removes ringers from the shuffle.
View shows the current shuffle list.
Sounds
Your phone has several settings that control the
sound. You can pick from a variety of ringers as
well as control the volume.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages). You
can silence all sounds and set the phone to vibrate
or light up when you receive calls and alerts.
Ringers
You can change the ringer for your phone. You
can also assign ringers for different tasks.
Select Menu > Settings > Sounds >
Ringer Mode and one of the following:
Set Ringers
Your phone has multiple ringers you can choose
to use for all incoming calls.
•
Normal Sounds rings for the incoming
call or alert (in effect, returns phone to a
non-silent mode).
1. Select Menu > Settings > Sounds >
Ringers > Ringer Type.
•
Vibrate Only vibrates for the duration of the
incoming call or other alerts.
2. Select a ringer. As you scroll down the list
you will hear the ringers.
User Guide
51
•
•
Vibe then Ring vibrates for the first
10 seconds and then rings for the
remainder of the incoming call alert.
Lights Only lights up for the duration of the
incoming call or other alerts.
Set Flip Sounds
Assign specific sounds for when your phone flip
opens or closes.
1. Select Menu > Settings > Sounds >
Flip Sounds > Flip Open or Flip Close.
2. Select a sound. As you scroll down the list
You can also press and hold the # Space key to go
back forth from Vibrate Only mode to Normal
Sounds mode.
you will hear the sounds.
Set Power On/Off Sounds
You can set your phone to play a sound when
powering on and off.
Note: The phone will ring when it is attached to
an external power source (such as a charger),
even if all sounds have been silenced.
1. Select Menu > Settings > Sounds >
Pwr On/Off Sound > Power On Sound or
Power Off Sound.
Volume
Control the volume of your phone’s features.
Set Volume
2. Select a sound. As you scroll down the list
you will hear the sounds.
Control the volume of the phone’s ringer,
speakerphone, earpiece and keypad.
Keypad
Control the keypad tones of the phone.
1. Select Menu > Settings > Sounds >
Volume > Ringer Volume,
Spkrphone Volume, Earpiece Volume,
or Key Volume.
Set Key Press Sounds
Choose the sounds the keys make when pressed.
2. Scroll right to increase the volume or left to
Select Menu > Settings > Sounds > Keypad >
Key Sounds > Tone, Click, or Off.
decrease the volume.
3. Press the OK key to save.
Set Key Tone Length
Control the length of the keypad tones.
Enable Smart Volume
Automatically adjust the volume during a call,
based on surrounding noise levels.
Select Menu > Settings > Sounds > Keypad >
Key Length > Normal or Long.
Select Menu > Settings > Sounds > Volume >
Smart Volume > Enabled.
52
Sounds
Set Screensaver
Display
Screensavers appear on the home screen during
idle state. A screensaver activates 10 seconds after
the last keypress. Incoming calls and alerts
override the screensavers.
Your phone has several settings that
control the display.
Set Wallpaper
You can select a wallpaper for your
phone’s home screen.
Select Menu > Settings > Display >
Set Screensaver and one of the following options:
Select Menu > Settings > Display >
Set Wallpaper and one of the following options:
•
•
•
•
Camera Pictures selects from taken pictures.
Saved Images selects from saved images.
Screensavers selects from screensavers.
None turns off the screensaver.
•
•
•
•
Camera Pictures selects from taken pictures.
Saved Images selects from saved images.
Wallpapers selects from wallpapers.
None turns off the wallpaper.
Set Theme
You can select a color theme for the display
background of your phone.
Enable Wallpaper Shuffle
You can set your phone to shuffle through
your wallpapers.
1. Select Menu > Settings > Display >
Themes.
Select Menu > Settings > Display >
Wallpaper Shuffle and one of the following:
2. Select a color theme. As you scroll down the
list you will preview the themes.
•
Enable / Disable turns the wallpaper
shuffle on or off.
Set Main Menu View
Display menus in various formats.
•
Edit adds or removes wallpapers from
the shuffle.
View shows the current shuffle list.
Select Menu > Settings > Display >
Main Menu View and one of the following:
•
•
Set Shuffle Time sets the time interval for
•
Grid displays icons of each menu item, with
each wallpaper change.
its name at the top of the screen.
•
List displays a list of all menu items.
The next time you select Menu from the home
screen, you see the menu style you selected.
User Guide
53
Set My Banner
Set Light Pipe Behavior
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. To change your banner:
Controls the behavior of the LED light on
the phone.
Select Menu > Settings > Display > Lightpipe
1. Select Menu > Settings > Display >
Behavior and one of the following:
My Banner.
•
•
•
Enable All turns the LED display on.
Disable All turns the LED display off.
Disable while Charging turns the LED display
off while the phone is charging.
2. Select Edit and press the Back key to clear
the current banner.
3. Enter your new text and select Save.
Set Brightness
Set Backlight Duration
Change the brightness of the display.
You can set the length of time the
backlighting remains on:
1. Select Menu > Settings > Display >
Brightness.
Select Menu > Settings > Display >
Backlighting and one of the following:
2. Scroll to change the brightness.
•
Always Dim forces the backlight to remain
dim until it turns off.
3. Press the OK key to save.
Set Language
Your phone can display alternative languages.
•
7 Seconds, 10 Seconds, 15 Seconds, or
30 Seconds turns backlighting on for the set
time after your last keypress.
Always Bright forces the backlight to remain
bright until it turns off.
Select Menu > Settings > Display > Language
and a language.
•
Set Time and Date Format
Your phone can display different time and
date formats.
Select Menu > Settings > Display >
Time/Date Format and a format.
54
Display
Set External Display
Set Date and Time
Controls what information is shown on the
external display.
While in Airplane Mode, your phone does not
keep time automatically. You can set the time and
date manually.
Select Menu > Settings > Display >
External Display and one of the following:
1. Select Menu > Settings > Convenience >
Set Time/Date.
•
Icons and Timedisplays information icons
and time.
2. Press the OK key to change the date.
•
•
Icons Only displays icons only.
Time Only displays time only.
–
Scroll left or right to move between
month, day and year fields.
Scroll up or down to change month, day
and year.
–
Convenience
Your phone has several settings that may make
your phone more convenient to use.
3. Press the OK key to save the date.
4. Press the OK key to change the time.
–
Scroll left or right to move between hour,
minute and AM/PM fields.
Scroll up or down to change hour,
minute and AM/PM.
Enable Airplane Mode
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control. In
Airplane mode, however, your phone will not emit
RF signals. You cannot make or receive calls,
send text messages, use the browser, or
Bluetooth, but you can play games, use the
Scheduler, set the clock, and make emergency
calls to designated emergency numbers. Please
check with uniformed personnel before operating
your phone in Airplane mode.
–
5. Press the OK key to save the time.
6. Select Done.
Enable Auto-Hyphenation
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan. For example,
1-222-333-4444.
To turn on auto-hyphenation:
To set your phone to Airplane mode:
Select Menu > Settings > Convenience >
Auto-Hyphen > Enabled.
Select Menu > Settings > Convenience >
Airplane Mode > Enabled > OK.
If you turn on Airplane mode, you can also set the
time and date manually.
User Guide
55
3. Select Save to save the message or Options
Enable 1-Touch Dialing
and one of the following:
The 1-Touch Dialing feature is the fastest way to
call a speed dial location. To call a contact with
speed dial, press and hold the speed dialing
location. If it is a two-digit location, press the first
digit briefly, then press and hold the second digit.
–
–
Play to replay your message.
Re-Record to record your
message again.
–
Exit to exit.
The next time a call comes in, you will have the
option of placing it on hold.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a speed
dial location assigned to a contact.
Place a Call on Hold
To turn on 1-touch dialing:
You can place a call on hold once you have
enabled this feature.
Select Menu > Settings > Convenience >
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It will go to voicemail.
1-Touch Dialing > Enabled.
Hold Call
When a call comes in, do the following:
1. Select Options > Hold Call. The caller will
be placed on hold and will hear your
recorded hold message.
Enable Hold Call
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
2. Select Answer to speak to the caller on hold
Note: The Hold Call feature will not work if the
Open to Answer feature is enabled. See “Enable
Open to Answer” on page 57.
or End Call to hang up without speaking.
Change Hold Call Message
1. Select Menu > Settings > Convenience >
1. Select Menu > Settings > Convenience >
Hold Call > Re-Record Msg.
Hold Call > Enabled.
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following:
If you have notrecorded a hold message, you
will be prompted to record one, such as
“Please hold. I’ll answer in a minute.”
–
–
Play to replay your message.
Re-Record to record your
2. Record the message twice, as prompted.
message again.
–
Exit to exit.
56
Convenience
Enable Fast Find
Set Missed Call Alert
With fast find enabled, you can press one or two
keys to view close matches of the number you are
looking for.
Choose your alert for missed calls.
1. Select Menu > Settings > Convenience >
Missed Call Alert.
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed
dial entry appears.
2. Select an alert.
If you select an alert with an & Remind, the phone
notifies you once when a new message is received
and then notify you again every five minutes. To
stop a reminder alert, select Ignore.
2. Scroll to the contact you want and press the
Send key to call the number.
Enable Open to Answer
To enable fast find:
Open to answer allows you to answer a call by
opening the phone.
Select Menu > Settings > Convenience >
Fast Find > Enabled.
Select Menu > Settings > Convenience >
Open to Answer > Enabled.
Enable Frequent List
The last 15 of your most frequently called
contacts appear at the beginning of your
contacts directory, when the frequent list is
enabled. Scroll past the double line to view
the entire contacts directory.
Enable Any Key Answer
Set your phone to answer a call when press
any key. Select Menu > Settings >
Convenience > Any Key Answer > Enabled.
To enable frequent list:
Voice Features
Following features allow you to customize the
voice commands.
Select Menu > Settings > Convenience >
Frequent List > Enabled.
Enable Minute Alert
Your phone can alert you with a short beep ten
seconds before each minute passes during a call.
Enable Automatic Add
You can set the phone to automatically add a
contact to your voice dial list when you create a
new contact. Select Menu > Settings >
Select Menu > Settings > Convenience >
Minute Alert > Enabled.
Voice Features > Automatic Add > Enabled.
User Guide
57
Set Expert Mode
Voice Answer
When expert mode is used, instead of speaking a
command following the initial voice prompts, you
can speak the command after you hear a tone.
Enable Voice Answer
You can set your phone to answer a call with your
voice when using a headset.
Select Menu > Settings > Voice Features >
Expert Mode and one of the following:
1. Disable the Auto-Answer feature,
see “Enable Auto-Answer” on page 59.
•
•
Normal sets phone to default voice prompts.
Expert sets phone to sound tones instead of
voice prompts.
2. Set the phone to normal sounds,
see “Set Ringer Mode” on page 51.
3. Set the phone to play sound from
the headset, see “Set Headset Sounds” on
page 59.
Set Display Results
You can set the phone to display up to three
recognition contacts when calling or searching
for a contact with voice commands.
4. Select Menu > Settings > Voice Features >
Voice Answer > With Accessory.
Select Menu > Settings > Voice Features >
Display Results > Single Best or Three Best.
Use Voice Answer
When you receive an incoming call, the phone
prompts you with a voice recording. If the caller
is recognized as a contact entry in your phone,
then the phone prompts “Incoming call from
(Name), answer?” Do one of the following:
Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list.
Select Menu > Settings > Voice Features >
Digit Lengths and one of the following:
•
•
•
Say “Yes” or press any except the End key to
answer the call.
Say “No” or press the End key to ignore
the call.
Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
•
North Americanallows 7, 10, and
1 + 10 digits in a phone number.
•
Permit All allows 4-14 digits in a
phone number.
58
Voice Features
To untrain your phone select Menu > Settings >
Voice Features > Voice Training > OK >
Untrain Numbers.
Voice Wake-up
Enable Voice Wake-up
You can set your phone to make a call using a
headset.
Accessories
This section describes settings that affect
accessories you use with your phone.
1. Set the phone to play sound from
the headset, see “Set Headset Sounds” on
page 59.
Set Headset Sounds
2. Select Menu > Settings > Voice Features >
When a headset is attached to your phone, the
ringer can be played through the headset or
phone speaker.
Voice Wake-up > With Accessory.
Use Voice Wake-up
To wake up the phone:
Select Menu > Settings > Accessories >
Headset Sounds and one of the following:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear
•
•
Out of phone rings from the phone speaker.
Out of headset rings from the headset.
two tones.
If the phone does not recognize your Wake Up
command, see “Use Voice Training” on page 59.
Enable Auto-Answer
When a headset is attached to your phone, the
phone can be set to answer automatically.
Use Voice Training
If your phone is having trouble recognizing
your voice, you can train by speaking
number commands.
Select Menu > Settings > Accessories >
Auto-Answer > After 5 Seconds. The phone will
automatically answer after 5 seconds.
1. Select Menu > Settings > Voice Features >
Enable TTY
Voice Training.
You can connect the phone to a teletype (TTY)
device for the hearing impaired.
2. Read the message and select OK.
3. Select Train Numbers.
Note: Enable TTY only when using the phone with
a TTY device.
4. Read the message and select OK.
5. Follow the prompts displayed on the
screen. Speak each number until training
is complete.
1. Connect the TTY device to your phone.
User Guide
59
2. Select Menu > Settings > Accessories >
4. Select Enabled.
TTY Device.
Network
3. At the notification, select OK.
Your phone has several settings for how your
phone connects to a network.
4. Select one of the following options:
–
–
–
TTY Off to disable TTY.
TTY On to enable for TTY devices.
TTY On + Talk to enable for TTY devices
and voice carry over.
Enable Date Mode
Your phone may be able to receive certain data,
depending on the system sending the information.
You cannot receive voice calls while the phone is
in data mode. To receive data, you must connect
the phone to a laptop or PC and switch the phone
from voice mode to data mode.
–
TTY On + Hear to enable for TTY
devices and hearing carry over.
Note: You can also enable TTY when you
enter ##889 with your keypad and select TTY.
Note: To purchase a cable, visit
www.kyocera-wireless.com/store.
Set Com Port Speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
To enable data mode:
Select Menu > Settings > Network > Data Calls
and one of the following:
Select Menu > Settings > Accessories >
Com Port Speed and a speed.
•
•
Voice Only turns data mode off.
Check with your service provider for details.
Data, next call sets the phone to data
mode for the next incoming call or the
next ten minutes.
Enable Hearing Aid
You can use your phone with a T-coil hearing
aid device.
•
Data, until off sets the phone to data mode
until the phone is turned off.
Note: Enable hearing aid feature only when using
the phone with a T-coil hearing aid device.
Enable Privacy Alert
Set your phone to alert you when enhanced digital
CDMA privacy is lost or regained.
1. Connect the T-coil hearing aid device to
your phone.
2. Select Menu > Settings > Accessories >
Select Menu > Settings > Network >
Privacy Alert > Enabled.
T-coil Hearing Aid.
3. At the notification, select OK.
60
Network
Enable Voice Privacy
Set Roaming Restrictions
Set your phone to use enhanced digital
CDMA privacy. Select Menu > Settings >
Network > Voice Privacy > Enhanced.
You can restrict your phone from making a call
when roaming.
Select Menu > Settings > Network >
Roam Option and one of the following:
Enable Roaming Service Alert
•
•
Automatic allows roaming.
No Roaming does not allows roaming.
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
Set Phone Line
Select Menu > Settings > Network > Roam/Svc
Alert and one of the following:
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
•
•
Disabled turns roaming service alert off.
When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection.
•
•
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Select Menu > Settings > Network >
Set Phone Line and a phone line.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
User Guide
61
Set Location Information
Enable Roaming Call Alert
This setting allows you to share your location
information with network services other than
emergency services (for example, 911, 111, 999
and 000) in markets where service has been
implemented. This feature works only when your
phone is in digital mode. You do have the option
of turning off the locator to emergency services.
You can set the phone to warn you before you
answer or place a call while roaming.
Note: Call prompt is disabled when the phone is
in Emergency Mode.
Select Menu > Settings > Network >
Roam Call Alert > Call Prompt.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept or
place a call while roaming, you must press 1.
Select Menu > Settings > Network > Location
and one of the following:
•
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency code.
Location On shares your position
information, in addition to
Security
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
•
emergency services.
Set Web Alerts
You can set an alert to confirm the start or exit of
the browser.
Lock Phone
Set Lock Phone
When your phone is locked, you can call only
emergency numbers or your service provider’s
customer service number. You can still receive
incoming calls.
Select Menu > Settings > Network > Web Alert
and one of the following:
•
•
•
At Start prompts when you start a session.
At End prompts when you end a session.
Both prompts when you start and end
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
a session.
•
No Prompts for no prompts.
4. Select OK to clear notification.
62
Security
5. Select one of the following:
Assign ICE Numbers
–
–
Never leaves the phone always unlocked.
On power up locks the phone every time
you turn it on.
The ICE (in case of emergency) numbers
feature allows you to specify three personal
phone numbers that can be called when the
phone is locked.
–
Now locks the phone immediately.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select ICE Numbers.
Unlock Phone
Do the following to unlock the phone:
•
•
From the home screen, select Yes.
Enter your four-digit lock code.
4. Select an Unassigned slot.
5. Enter the number and select Done.
Set Limit Calls
You can view these numbers only when they’re
being entered for the first time.
You can limit the calls that can be made from your
phone to emergency numbers, your contacts, and
your service provider’s numbers.
To make a call to an ICE number from a locked
phone, you must dial the number (including area
code) exactly as it was stored in ICE numbers.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
Erase All Contacts
3. Select Limit Calls and one of the following:
You can erase all entries from your
Contacts directory.
–
–
No Limit does not limit calls.
Limit Outgoing limits outgoing calls.
Incoming calls can be answered.
1. Select Menu > Settings > Security.
–
Limit All limits both incoming and
2. Enter your four-digit lock code.
outgoing calls.
3. Select Erase Contacts and one of
the following.
–
–
No exits without erasing contacts.
Yes erases all contacts. A confirmation
prompt appears to verify your decision.
4. Select Yes to confirm.
User Guide
63
Change Lock Code
Change your lock code from the default provided
by the service provider. The lock code is typically
0000 or the last 4 digits of your phone number.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select New Lock Code and one of
the following.
4. A confirmation prompt appears. Select Yes.
5. Enter a new four-digit code.
6. Re-enter your new lock code. The lock code
is now changed.
View Phone Information
You can access information regarding
your phone.
Select Menu > Settings > Phone Infoand one of
the following:
•
•
•
Build Info shows specific software and
hardware information.
Icon Key shows the icons used by
your phone.
User Guide accesses the user guide.
64
View Phone Information
10 Tools
Your phone comes with tools and games. Some of
the games or tools described here may not be
available on your phone. If you receive an
incoming call while you are playing a game, the
game is paused and exited. You can return to play
once the call alert ends. Games do not remain
paused if the phone is turned off or loses power.
View Voice Memos
To play and use voice memos, do the following:
1. Select Menu > Tools > Voice Memo >
Recorded Memos.
2. At the file list, highlight a memo.
3. Select Play to play the memo select Options
and one of the following:
Voice Memo
The Voice Memo tool allows you to record and
play back audio memos.
–
Send creates a message with the
file attached or sends file to a
Bluetooth device.
–
–
–
Erase deletes the memo.
Record Voice Memos
To record new voice memos, do the following:
Assign assigns the memo to a function.
Send to Online uploads a file to an
online server.
1. Select Menu > Tools > Voice Memo >
Record New.
–
Lock / Unlock prevents accidental
erasing of the memo.
2. Say your voice memo. Select Stop when
you are done.
–
–
Rename renames the memo.
Shuffle adds the file to your ringer
shuffle list.
Details displays the details of the file.
3. Select Save to save your memo.
If an incoming call is received while you are
recording a memo, the memo is saved and the
incoming call screen appears.
–
–
Erase All deletes all unlocked memos.
Create an Event
1. Select Menu > Tools > Scheduler >
Scheduler
The Scheduler allows you to schedule events and
set reminder alerts.
Add New Event.
2. Enter a name. Scroll down to move to the
next field when done.
User Guide
65
3. Choose an event type. Press the OK key and
9. Enable silent mode, if needed. press the OK
key and select No to leave on normal sounds
or During Event to place phone in silent
mode during the duration of the event.
select a choice from the list.
4. Modify the date, if needed. Press the OK key
to change the date.
10. Make the event recurring, if need. Press the
–
–
Scroll left or right to move between
month, day and year fields.
Scroll up or down to change month, day
and year.
OK key and select a choice from the list.
11. Select Save to save the event.
View Events
You can view the events saved to the scheduler.
Press the OK key to save date and move to
the next field.
5. Modify the time, if needed. Press the OK key
View by Date
1. Select Menu > Tools > Scheduler and one
to change the time.
–
–
Scroll left or right to move between hour,
minute and AM/PM fields.
Scroll up or down to change hour,
minute and AM/PM.
of the following:
–
View Month displays the current month.
Days with events are highlighted. Scroll
through the calendar. Press the OK key to
select a date.
Press the OK key to save time and move to
the next field.
–
–
View Day displays the current date.
Scroll right or left to move to
another date.
Go to Date chooses a specific date.
Scroll left or right to move between
month, day and year fields. Scroll up or
down to change month, day and year.
Press the OK key to select the date.
6. Modify the duration of event, if needed. Press
the OK key to change the duration.
–
–
Scroll left or right to move between hour
and minute fields.
Scroll up or down to change hour
and minute.
Press the OK key to save duration and move
to the next field.
2. At the day view, do one of the following.
–
Select an existing event to view the
event detail.
Scroll to a time and select Add New to
create a new event.
7. Choose a priority. Press the OK key and
select a choice from the list.
–
8. Choose a reminder. Press the OK key and
select a choice from the list.
66
Scheduler
–
–
–
Select Options > Go to Today to go to
the current date.
Select Options > Go to Date to go to a
specific date.
Select Options > Erase Today’s Events
to delete all events for that date.
•
•
Send creates a message with the event
attached or sends event to a Bluetooth
device or printer.
Copy creates an event with the existing
event information.
Scheduler Settings
You can change the default settings of
your scheduler.
View by List
1. Select Menu > Tools > Scheduler >
View All Events.
Select Menu > Tools > Scheduler > Settings
and one of the following:
2. At the event list, select one of the following:
–
–
–
–
–
–
Scroll to an event and select View to
display the event detail.
Select Options > Sort by Time to sort
events by time.
Select Options > Sort by Type to sort
events by type.
Select Options > Sort by Priorityto sort
events by priority.
Select Options > Erase All Events to
delete all events.
Select Options > Erase All Past Events
to delete all past events.
•
•
•
•
•
Scheduler Hours changes the work day.
Auto Erase deletes events automatically.
Priority prioritizes new events.
Reminder assigns reminders for new events.
Reminder Sound assigns sound alerts for
new event reminders.
•
Silent Mode sets phone to silent mode for
new events.
Modify an Event
You can modify existing events.
From the event detail screen, you can select OK to
return to the previous screen or Options and one
the following:
•
•
Edit edits the event.
Erase deletes the event.
User Guide
67
Set the Quick Alarm
Alarm Clock
1. Select Menu > Tools > Alarm Clock.
2. Highlight the quick alarm and select Set.
3. Choose a time. A notification shows the quick
alarm is on.
When the quick alarm rings, select Off to turn off
the alarm or Reset to set the quick alarm again.
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
Note: The alert occurs only if the phone is on.
Set an Alarm
1. Select Menu > Tools > Alarm Clock.
2. Scroll to one of the alarms and select Set.
Use Tip Calculator
3. Modify the time, if needed. Press the OK key
The Tip Calculator helps you calculate how much
tip to include with a bill.
to change the time.
–
–
Scroll left or right to move between hour,
minute and AM/PM fields.
Scroll up or down to change hour,
minute and AM/PM.
1. Select Menu > Tools > Tip Calculator.
2. Enter the amount of your bill.
3. Select percentage you want to tip.
4. Enter the number of guests splitting the bill.
5. Select Next. The bill amount is shown.
6. Select Done to return to menu.
Press the OK key to save time and move to
the next field.
4. Choose a sound. Press the OKkey and select
a choice from the list.
Use Calculator
5. Make the alarm recurring, if needed. Press
The Calculator can perform basic mathematical
operations.
1. Select Menu > Tools > Calculator.
2. Enter the first number.
the OK key and select a choice from the list.
6. Enter a note. Press the OK key.
7. Select Save to set the alarm.
When the alarm rings, select Stop to turn off
the alarm or Snooze to reset the alarm for
next 10 minutes.
3. Select a mathematical operation:
–
–
–
–
Scroll left to multiply.
Scroll right to divide.
Scroll up to add.
Note: Opening the flip turns off the alarm.
Scroll down to subtract.
The chosen operation is highlighted.
68
Alarm Clock
4. Enter the second number. Press the OK
key to perform the operation. The result
is shown.
–
–
Stop pauses the countdown.
Reset clears the timer.
When the countdown is complete select Off to
5. Select Exit to return to menu or Options and
silence the alarm.
one of the following:
–
MS clears value currently stored and
adds the displayed result to value stored
in memory.
M+ adds displayed result to the value
stored in memory.
MR displays currently stored value on
the screen.
MC clears value currently stored
in memory.
Use Stopwatch
The Stopwatch counts time for you.
1. Select Menu > Tools > Stopwatch.
–
–
–
2. To work the stopwatch, select the
following options:
–
–
–
Start begins counting.
Stop pauses couting.
Reset clears the stopwatch.
Press the Back key to return to the menu.
Use Timer
The Timer counts down for the specified time.
It beeps when that amount of time has elapsed.
Memopad
Write memos on your phone.
1. Select Menu > Tools > Timer > Set.
2. Enter the first number.
Write a Memo
To write a memo:
3. Enter the time length.
1. Select Menu > Tools > Memopad >
–
Scroll left or right to move between
hours, minutes and seconds fields.
New Memo.
2. Enter the memo.
–
Scroll up or down to change hours,
minutes and seconds.
3. Select Save.
4. If needed, select Sound and one of the
sounds to change the sound.
5. To work the timer, select the
following options:
–
Start begins the countdown.
User Guide
69
Use a Memo
Search World Clock
To use memos:
1. Select Menu > Tools > World Clock >
Options > Search City or Search Country.
1. Select Menu > Tools > Memopad >
View Memos.
2. In the search field, enter letter(s) to search
by. Results are listed as you type.
2. From the memo list, select a memo.
3. Select a city or country from the list.
3. Select Options and one of the following:
–
–
Edit modifies the memo.
Send as SMS sends memo with a
text message.
–
–
Use Number uses a number in
the memo.
Lock Memo / Unlock Memo prevents
accidental erasing of the memo.
Erase deletes the memo.
Erase All deletes all the
unlocked memos.
–
–
World Clock
The world clock lets you check times in cities
around the world in relation to local time.
Set World Clock
1. Select Menu > Tools > World Clock.
The world clock menu is displayed. Your
local time and date is on the first line,
followed by your selected world city and that
city’s time and date.
2. When you first access World Clock, scroll left
or right to select a time zone.
The world clock menu is displayed again, with the
new time zone.
70
World Clock
11 BREW Apps
Your Kyocera phone has the added ability
to download and manage applications
through BREW.
Download an Application
1. Select Menu > BREW Apps >
Mobileshop > Catalog. When a
connection is made, a list of
application types appears.
BREW brings you the full range of applications
and services you have come to expect from the
Internet: Email and instant messaging, real-time
navigation services, group chat, games, relevant
news, and much more.
2. Select an application type. A list of
applications appears. Long titles scroll left as
you highlight them.
For more information about BREW
capabilities and application pricing, contact
your service provider.
3. Select an application. A list of usages
appears. There may be one or more
usages available. Prices are specified
for each usage.
How does BREW Work?
4. Select a usage for the application. You are
You connect to the server, download applications,
and then manage them as you like. When you
choose an application, you have the option of
choosing a demo, various limited use options, or
the full version—all varying in price. If you
choose a demo, BREW lets you know when it has
expired. If you choose a priced version, the
amount is added to your phone bill. BREW also
lets you know if you’re running out of memory. At
that point, you can either disable an application
or remove it completely.
prompted to confirm your purchase.
5. Select Yes to confirm. The application
downloads to your phone. Download times
may vary.
To open the application now, select Yes. If you
select No, you return to the BREW Apps menu,
where you see a link to your new application.
Note: Your connection to the application server
automatically ends after 30 seconds, unless you
connect again to download more apps. If you
want to end the connection manually, press the
End key on your phone.
Once applications are loaded, you can update to
newer versions as they become available.
User Guide
71
Open an Application
Disable an Application
Downloaded applications are stored under the
BREW Apps menu. Each application comes with
its own unique icon, to help you identify it easily.
If you are running out of memory and would like
to download more applications, but do not want
to completely remove those you have paid for, you
can simply disable them. This means you have to
re-download an application in order to use it
again, but don’t have to pay for it again.
Select Menu > BREW Apps and the application.
The BREW Apps icon always remains at the top
of this menu. Downloaded applications are
listed after.
1. Select Menu > BREW Apps > Settings >
Manage Apps.
2. Select an application.
View Application Details
You can get information about the size of
an application and how many uses it has left
before it runs out.
3. Select Lock App. At the prompt, select Yes
to confirm.
The application is listed in the BREW Apps menu.
1. Select Menu > BREW Apps > Settings >
The icon looks like an empty box.
Manage Apps.
Check Available Memory
2. Select an application to view its details.
The amount of memory depends on the number
of applications you download.
Remove an Application
If you remove an application, it is removed
completely from your phone. If you want to use it
again, you must pay for it again. If you want to free
up space on your phone, we recommend you
disable the application.
Select Menu > BREW Apps > Settings >
Manage Apps > System Info.
The amount of memory left is shown.
1. Select Menu > BREW Apps > Settings >
Manage Apps.
2. Select an application.
3. Select Remove. At the prompt, select
Yes to confirm.
72
Open an Application
12 Media Gallery
Your phone stores media files and can display
those files on the phone display.
Modify a Picture
To modify a picture you have taken, do
the following:
Browse Camera Pictures
To browse the camera pictures on your phone:
1. Select Menu > Media Gallery > Images >
Camera Pictures and a picture from the list.
1. Select Menu > Media Gallery > Images >
Camera Pictures. You can scroll through
the file list.
2. Select Options > Modify > Options and
one of the following:
–
Rotate rotates the picture. Options
include 90° right, 180°, 90° left, flip
horizontal and flip vertical.
2. Select View to open a highlighted file or
select Options and one of the following:
–
Send creates a message with the file
attached or sends file to a Bluetooth
device or printer.
–
Resize resizes the image. Options
include 90%, 75%, 50% and 35%.
Brightness adjusts the brightness.
Sharpness adjusts the sharpness.
Saturation adjusts the saturation.
Hue adjusts the hue.
Auto Adjust automatically adjusts
all levels.
–
–
–
–
–
–
–
–
Take Picture launches the camera.
Erase deletes the file.
Assign assigns the file as a Caller ID,
wallpaper, or screensaver.
Slideshow starts a slide show beginning
with the selected file.
Send to Online uploads a file to an
online server.
–
–
–
–
Color Tone adjusts the color tone.
Options include grayscale, negative,
sepia and emboss.
Lock / Unlock prevents accidental
erasing of the file.
3. If you modify the picture, select Save to
save your changes. You can save the
modified picture over the existing file or
save it as a new file.
–
–
Rename renames the file.
Shuffle adds the file to the
wallpaper shuffle.
–
–
Details displays details of the file.
Erase All deletes all unlocked files.
User Guide
73
Browse Saved Images
To browse the saved images on your phone:
Browse Wallpapers
To browse the wallpapers on your phone:
1. Select Menu > Media Gallery > Images >
Saved Images. You can scroll through
the file list.
1. Select Menu > Media Gallery > Images >
Wallpapers. You can scroll through the
file list.
2. Select View to open a highlighted file or
2. Select View to open a highlighted file or
select Options and one of the following:
select Options and one of the following:
–
Send creates a message with the file
attached or sends file to a Bluetooth
device or printer.
–
Send creates a message with the file
attached or sends file to a Bluetooth
device or printer.
–
–
Erase deletes the file.
–
–
Erase deletes the file.
Set Default assigns the file as
the wallpaper.
Send to Online uploads a file to an
online server.
Lock / Unlock prevents accidental
erasing of the file.
Assign assigns the file as a Caller ID,
wallpaper, or screensaver.
Send to Online uploads a file to an
online server.
Lock / Unlock prevents accidental
erasing of the file.
–
–
–
–
–
–
Rename renames the file.
Shuffle adds the file to the
–
–
Rename renames the file.
Shuffle adds the file to the
wallpaper shuffle.
wallpaper shuffle.
–
–
Details displays details of the file.
Erase All deletes all unlocked files.
–
–
Details displays details of the file.
Erase All deletes all unlocked files.
74
Browse Saved Images
–
–
–
Rename renames the file.
Details displays details of the file.
Erase All deletes all unlocked files.
Edit Wallpaper Shuffle
To edit the wallpaper shuffle of your phone, do
the following:
1. Select Menu > Media Gallery > Images >
Browse Caller IDs
Wallpaper Shuffle.
To browse the caller IDs on your phone:
2. Select Edit to add or remove images from
your wallpaper list or Options > Set Shuffle
Time to modify the time interval for
the shuffle.
1. Select Menu > Media Gallery > Images >
Caller IDs. You can scroll through the
file list.
2. Select View to open a highlighted file or
To enable this feature, see “Enable Wallpaper
Shuffle” on page 53.
select Options and one of the following:
–
–
Assign assigns the file to a contact as
a Caller ID.
Details displays details of the file.
Browse Screensavers
To browse the screensavers on your phone:
1. Select Menu > Media Gallery > Images >
Screensavers. You can scroll through the
file list.
Browse Saved Sounds
To browse the saved sounds on your phone:
1. Select Menu > Media Gallery > Sounds >
Saved Sounds. You can scroll through
the file list.
2. Select View to open a highlighted
screensaver or select Options and one
of the following:
2. Select Send to create a message with the
sound attached or select Options and one
of the following:
–
Send creates a message with the file
attached or sends file to a Bluetooth
device or printer.
–
–
–
Erase deletes the file.
Assign assigns the sound.
Send to Online uploads a file to an
–
–
Erase deletes the file.
Set Default assigns the file
the screensaver.
online server.
Lock / Unlock prevents accidental
erasing of the file.
Rename renames the file.
–
–
Send to Online uploads a file to
an online server.
Lock / Unlock prevents accidental
erasing of the file.
–
–
User Guide
75
–
Shuffle adds the image to the
wallpaper shuffle.
Details displays details of the file.
Erase All deletes all unlocked files.
Edit Ringer Shuffle
To edit the ringer shuffle of your phone, do
the following:
1. Select Menu > Media Gallery > Sounds >
Ringer Shuffle.
–
–
Browse Ringers
To browse the ringers on your phone:
2. Select Edit to add or remove sounds from
your ringer list.
To enable this feature, see “Enable Ringer
Shuffle” on page 51.
1. Select Menu > Media Gallery > Sounds >
Ringers. You can scroll through the file list.
2. Select Assign to assign the ringer or select
Browse Voice Memos
Options and one of the following:
To browse the voice memos on your phone:
–
Send creates a message with the
file attached or sends file to a
Bluetooth device.
1. Select Menu > Media Gallery > Sounds >
Voice Memos. You can scroll through
the file list.
2. Select Play to play the voice memo or select
Options and one of the following:
–
–
Erase deletes the file.
Send to Online uploads a file to an
online server.
–
Send creates a message with the
file attached or sends file to a
Bluetooth device.
–
Lock / Unlock prevents accidental
erasing of the file.
–
–
Rename renames the file.
Shuffle adds the image to the
wallpaper shuffle.
–
–
–
–
Record New records a new voice memo.
Erase deletes the file.
Assign assigns the file.
–
–
Details displays details of the file.
Erase All deletes all unlocked files.
Send to Online uploads a file to an
online server.
–
Lock / Unlock prevents accidental
erasing of the file.
–
–
–
–
Rename renames the file.
Shuffle adds the file to the ringer shuffle.
Details displays details of the file.
Erase All deletes all unlocked files.
76
Browse Ringers
Delete All Files
You can delete your unlocked media files:
Select Menu > Media Gallery > Delete All and
one of the following:
•
•
•
•
Cam Pics Only deletes all unlocked camera
pictures from the phone.
Images Only deletes all unlocked images
from the phone.
Sounds Only deletes all unlocked sounds
from the phone.
Delete All deletes all unlocked media files
from the phone.
Note: Deleted information cannot be recovered.
Playback Tools
When you playback sound files, use the
Navigation key to select the playback tools
displayed on the screen.
User Guide
77
13 Voice Commands
Voice commands allow you to call a contact, dial a
phone number, access menus, or find contact
information from your voice dial list.
Remove Contacts
To remove a contact from your voice dial list:
1. Select Menu > Contacts > Voice Dial List.
Note: You cannot use voice recognition to end a
call; you must press the End key when the flip is
open.
2. At the contact list, highlight a check marked
contact and press the OK key. No check
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
wish remove from voice dialing.
Voice Dial List
To call or find a contact using voice dial you must
add the contact to your voice dial list. The contact
name must not have more than three words or
components in a contact name for voice dialing
recognition.
3. Select Save.
Voice Commands
Start Voice Commands
1. From the home screen, press and hold the
Send key to initiate voice commands. The
phone prompts, “Say a command”.
Add Contacts
To call or find a contact using voice dial you
must add the contact to your voice dial list. The
contact name must not have more than three
words or components in a contact name for
voice dialing recognition.
2. Say one of the following commands and
following the voice prompts.
–
–
–
–
“Contact <name>” sends call to a
contact on your voice dial list.
“Dial Number <number>” sends call by
speaking the digits of the phone number.
“<shortcut name>” sends you to a
menu item.
To add a contact to your voice dial list:
1. Select Menu > Contacts > Voice Dial List.
2. At the contact list, highlight a contact
and press the OK key. A check mark
appears next to a name when voice dialing
is active. Check each name you wish use
with voice dialing.
“Find Contact” allows you to find a
contact from your voice dial list.
3. Select Save.
78
Voice Dial List
Call a Contact
Call a Number
1. If you haven’t already done so, add the
person you wish to call to the Voice Dial List.
See “Add Contacts” on page 78.
1. From the home screen, press and hold
the Send key. The phone prompts,
“Say a command”.
2. From the home screen, press and hold
the Send key. The phone prompts, “Say
a command”.
2. Say “Dial Number” and then speak the digits
of the number you want to call. If you pause,
the phone prompts you, “Did you say
<number>” or “Say a number” if it does not
recognize the name. Say “Yes” to make the
call, “No” to cancel the phone call.
3. Say “Contact” and then name of the person
you want to call.
The phone prompts, “Please repeat” or “Say
a name” if it does not recognize the name. If
the name you spoke matches a contact in the
Voice Dial List, the phone prompts: “Name,
correct?” Say “Yes” to make the call, “No” to
select a similar name, or “Cancel” to cancel
the phone call.
3. Press the End key to end the call.
Use Shortcuts
1. From the home screen, press and hold
the Send key. The phone prompts,
“Say a command”.
2. Say the name of the menu item you want to
access or say “Shortcuts” to view a list of
menu items. The phone prompts, “Say one
of the shortcuts”.
If the phone finds multiple voice tags that
sound like the name you said, the phone will
list the names, you will be asked to verify
which name you want to call. Say “Yes” when
you hear the correct name. Say “No” when
you hear an incorrect name.
3. Say the name of the menu item you want
to access.
4. Press the End key to end the call.
User Guide
79
Find Contacts
You can use voice commands to find contacts
listed in your voice dial list.
1. From the home screen, press and hold
the Send key. The phone prompts, “Say
a command”.
2. Say “Find Contacts”. The phone prompts,
“Say a name”.
The phone prompts, “Please repeat” or “Say a
name” if it does not recognize the name. If the
name you spoke matches a contact in the Voice
Dial List, the phone prompts: “Name, correct?”
Say “Yes” to display the contact, “No” to select a
similar name, or “Cancel” to cancel the search.
Voice Command Settings
You can control settings for your phone’s voice
recognition feature. For more information, see:
•
•
•
•
•
“Enable Automatic Add” on page 57
“Set Display Results” on page 58
“Set Digit Lengths” on page 58
“Use Voice Training” on page 59
80
Voice Command Settings
14 Get Help
•
Customer support phone numbers are also
available in the following countries:
User Guide
You have a user guide located on your phone. To
access this user guide, select Menu > Settings >
Phone Info > User Guide.
–
–
India: 1-600-121214 or 0124-284-5000
Puerto Rico: 1-866-664-6443
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
The user guide for your phone is also located on
the web at www.kyocera-wireless.com/support.
Customer Support
•
•
The name of your service provider.
The actual error message or problem you are
experiencing.
Your service provider’s customer support
department may be accessible directly from your
phone when you dial a number, such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available
to you, such as call forwarding or voicemail. For
questions about the phone features, refer to the
materials provided with your phone, or visit
•
•
The steps you took to reproduce the problem.
The phone’s mobile equipment identifier
(MEID).
Note: To locate the MEID select Menu >
Settings > Phone Info > Build Info and scroll
down to MEID for the 18-digit number. If your
phone uses an electronic service number (ESN),
then ESN replaces MEID.
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
Qualified Service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
•
•
•
Email: [email protected].
Phone: 1-800-349-4478 (U.S. and Canada) or
1-858-882-1401.
User Guide
81
Phone Accessories
To shop for phone accessories, visit
www.kyocera-wireless.com/store. You may
also call us at 800-349-4188 (U.S.A. only)
or 858-882-1410.
Become a Product Evaluator
To participate in the testing and evaluation
of Kyocera Wireless Corp. products,
including cellular or PCS phones, visit
beta.kyocera-wireless.com.
82
Phone Accessories
Index
Numerics
1-touch dialing, 56
appended messages, 40
applications
searching, 24
browsing, 73
details, 72
disabling, 72
downloading, 71
opening, 72
removing, 72
A
C
accessories
headsets, 59
phone, 82
settings, 59
calculator, 68
call lists
erasing, 47
viewing, 46
call timers, 47
callback number, 43
text message, 35
caller IDs
auto-erase, 43
auto-hyphenation, 55
T-coil hearing aid, 60
TTY device, 59
activating Bluetooth, 49
adding
B
Bluetooth devices, 49
codes, 26
contacts, 25
backlight duration, 54
banner, 54
battery
assigning, 75
browsing, 75
calls
extensions, 26
airplane mode, 55
set date/time, 55
alarm clock, 68
alerts
charging, 9
drain, 10
installing, 9
answering, 17
recharging, 9
safety guidelines, 10
Bluetooth, 49
adding devices, 50
connecting, 50
disconnecting, 50
pairing, 49
call lists, 46
data, 60
emergency, 19
ending, 18
LED, 13
holding, 56
messages, 42
limiting, 63
minute, 57
making, 17
missed calls, 57
pages, 42
phone name, 51
settings, 51
turning on, 49
bookmarks, 24
BREW, 71
brightness, 54
browser, 23
launching, 23
options, 23
silencing, 18
voice commands, 79
camera, 32
privacy, 60
roaming calls, 62
roaming service, 61
vibrating, 51
brightness, 33
color tone, 33
last picture, 33
mode, 32
multishots, 32
picture compression, 33
voicemail, 42
answering calls, 17
any key, 57
any key answer, 57
User Guide
83
picture settings, 32
resolution, 32
sending text message, 27
speed dial list, 27
street addresses, 28
viewing all, 25
voice search, 80
web addresses, 28
games, 71
drafts folder, 41
self timer, 32
E
shutter sound, 32
taking pictures, 32
time stamp, 32
earpiece, 17
volume, 52
editing contacts, 26
email addresses, 27
emergency
capitalization, 21
CDMA privacy, 60
changing modes, text entry, 21
color themes, 53
color tone, 33
calls, 19
numbers, 63
entering
convenience settings, 55
conventions, using this guide, 16
countdown timer, 69
custom menu, 49
customer support, 81
customizing contacts, 26
letters, 20
com port speed, 60
connecting Bluetooth devices, 50
contacts, 25
numbers, 20
symbols, 21
text, 22
adding, 25
erasing
adding to a group, 27
assign message tone, 26
assign number type, 29
calling numbers, 27
customizing, 26
all contacts, 31
all media files, 77
contacts, 63
multimedia messages, 40
text messages, 40
evaluation, product, 82
D
default text mode, changing, 44
dialing
1-touch, 56
speed, 18
voice list, 78
F
delete all, 31
directory, contacts, 25
disconnecting, devices, 50
display
fast find, 57
flip
directory, 25
email addresses, 27
fast find, 57
frequent list, 57
groups, 29
IM addresses, 27
memory, 31
notes, 28
prepend, 27
primary number, 27
searching, 30
answering calls, 57
sounds, 52
folders
banner, 54
brightness, 54
color themes, 53
language, 54
caller IDs, 75
camera pictures, 33
draft, 41
images, 74
outbox, 41
pictures, 73
ringers, 76
main menu, 53
screensavers, 53
settings, 53
time/date format, 54
wallpapers, 53
downloading
applications, 71
84
screensavers, 75
sent, 41
erasing, 74
locking, 74
sending, 74
main, 15
main view, 53
setting, 48
sounds, 75
voice memos, 76
frames, 33
frequent list, 57
messages
alerts, 42
appended, 40
incoming calls, 46
Internet, 23
auto-erase incoming, 43
callback number, 43
completing, 41
default text mode, 44
failed, 41
incoming calls, 41
list view, 42
K
keypad
G
key tone length, 52
sounds, 52
volume, 52
gallery, media, 73
games, 65
downloading, 71
groups, 29
keys
tone length, 52
tones, 52
multimedia messages, 36
pending, 41
L
quicktext, 42
language, 54
lanyard, 11
saved, 43
sent, 41
LED behavior, 13
lights only alerts, 52
limiting calls, 63
location information, 62
lock code, 64
settings, 42
signature, 42
sending text message, 30
text messages, 34
unable to send, 40
H
minute alerts, 57
missed calls, 46
alerts, 57
deal with, 46
modes
headsets
locking
auto answer, 59
sounds, 59
phone, 62
voice answer, 58
voice wake-up, 59
help, getting, 81
hold calls, 56
airplane, 55
expert, voice, 58
ringers, 51
M
main menu, 15
making calls, 17
media files
text entry, 20
multimedia messages
CC/BCC fields, 43
creating, 36
I
delete all, 77
media gallery, 73
memopad, 69
memory, 72
menus
multimedia messages, 38
text message, 35
images
erasing, 40
forwarding, 38
assigning, 74
browsing, 74
custom, 49
User Guide
85
icon, 38
notifications, 38
options, 37
previewing, 37
prompts, 38
quicktext, 37
page alerts, 42
pairing, 49
phone
quick alarm, 68
quicktext, 42
R
answering calls, 17
rapid entry, 21
read receipt request
Bluetooth name, 51
codes, 26
extensions, 26
icons, 14
overview, 12
multimedia messages, 44
text messages, 44
receipt request
read receipt request, 44
receipt request, 44
recording sounds, 37
replaying, 39
text message, 35
setting line, 61
turning on and off, 17
phone information, 64
icons, 64
replying, 38
text messages, 44
request receipt, 37
retrieving, 38
recent calls, 46
erase all, 44
redialing, 17
replying
multimedia messages, 38
text messages, 36
resolution, 32
saving, 39
software build, 64
user guide, 64
pict ure messages, see multimedia
send later, 37
sender information, 38
set priority, 37
slide interval, 37
slides, 39
pictures
restrict roaming, 61
ringer shuffle
edit, 51
assigning, 73
browsing, 73
taking pictures, 37
viewing, 38
compression, 33
erasing, 73
ringers, 51
assigning, 76
browsing, 76
erasing, 76
locking, 76
mode, 51
N
frames, 33
network
last taken, 33
location information, 62
set phone line, 61
settings, 60
locking, 73
sending, 73
roam, 51
notes, contacts, 28
notifications
slideshow, 73
taking, 32
sending, 76
silent mode, 51
type, 51
multimedia messages, 38
text messages, 35
playback tools, 77
power
on and off sounds, 52
primary number, 27
privacy alerts, 60
prompt mode, 38
O
volume, 52
roaming
open to answer, 57
outbox, 41
outgoing calls, 46
call alerts, 62
restrict, 61
service alerts, 61
P
Q
86
S
display, 53
stopwatch, 69
support, customer, 81
symbols, 21
saved folder, 43
scheduler, 65
network, 60
phone information, 64
picture, 32
creating events, 65
T
modifying events, 67
settings, 67
T-coil hearing aid, 60
teletype, 59
quick alarm, 68
scheduler, 67
security, 62
viewing events, 66
text entry, 20
screensavers, 53
capitalization, 21
changing modes, 21
current mode, 20
default mode, 44
letters, 20
browsing, 75
erasing, 75
locking, 75
sending, 75
sounds, 51
world clock, 70
settings menu, 48
searching
shutter sound, 32
signature, 42
silent mode, 51
smart sound, 52
software
numbers, 20
contacts directory, 30
fast find, 57
frequent list, 57
voice commands, 80
quick reference, 22
rapid entry, 21
text messages
callback number, 35
creating, 34
erasing, 40
forwarding, 36
icon, 35
notification, 35
options, 35
quicktext, 34
replying, 35
request read receipt, 44
retrieving, 35
saving, 36
send later, 35
build information, 64
sounds
assigning, 75
security
emergency numbers, 63
erasing contacts, 63
limiting calls, 63
lock code, 64
locking phone, 62
settings, 62
browsing, 75
erasing, 75
flip closed, 52
flip open, 52
keypad, 52
self timer, 32
sent folder, 41
set priority
multimedia messages, 37
text message, 35
settings
locking, 75
playback tools, 77
power on and off, 52
ringers, 51
settings, 51
silence all, 51
volume, 52
accessories, 59
alarm clock, 68
Bluetooth, 51
camera, 32
convenience, 55
date and time, 55
speakerphone, 18
volume, 52
speed
sender information, 36
set priority, 35
validity period, 35
viewing, 35
com port, 60
dialing, 18
time calls, 57
User Guide
87
time stamp, 32
timer, 69
tip calculator, 68
tools, 65
training, 59
searching, 70
voice dialing
activating, 18
adding contacts, 78
automated lists, 57
digit lengths, 58
alarm clock, 68
calculator, 68
memopad, 69
scheduler, 65
stopwatch, 69
timer, 69
removing contacts, 78
voice memos, 65
browsing, 76
recording, 65
tip calculator, 68
voice memo, 65
TTY device, 59
U
voicemail, 39
user guide, 64
alerts, 42
number, 44
volume, 52
V
validity period
text message, 35
vibrating call alerts, 51
viewing contacts, 25
viewing, messages, 42
voice
adjusting, 18
earpiece, 52
keypad, 52
ringers, 52
smart sound, 52
speakerphone, 52
answer, 58
dial list, 78
W
privacy, 61
wallpapers, 53
browsing, 74
training, 59
erasing, 74
locking, 74
sending, 74
voice commands, 78
calling contacts, 79
calling numbers, 79
display results, 58
expert mode, 58
find contacts, 80
settings, 57
web
addresses, 28
alerts, 62
browser, 23
white balance, 33
world clock, 70
shortcuts, 79
88
|