Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the U.S.
Government. These limits are part of
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements. While there may be
differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of
scientific studies. The standards include a
substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6 W/kg.*
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model
phone is on file with the FCC and can be found
under the Display Grant section
http://www.fcc.gov/oet/ea/ after searching on the
FCC ID: OVFKWC-K33B04.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the network.
In general, the closer you are to a wireless base
station antenna, the lower the power output.
Bluetooth® Certification
For information about S4000 Bluetooth
Certification, visit the Bluetooth Qualification
Program Web site at qualweb.bluetooth.org.
Caution
Before a phone model is available for sale to the
public, it must be tested and certified by the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
The user is cautioned that changes or modifications
not expressly approved by the party responsible for
compliance could void the warranty and user’s
authority to operate the equipment.
Optimizing your phone’s performance
Use the guidelines in this guide to learn how to
optimize the performance and life of your phone
and battery.
User Guide
iii
Air bags
Potentially unsafe areas
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over the
air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
Posted facilities—Turn your phone off in any
facility when posted notices require you to do so.
Aircraft—FCC regulations prohibit using your
phone on a plane that is in the air. Turn your
phone off or switch it to Airplane Mode before
boarding aircraft.
Medical devices
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
Blasting areas—Turn off your phone where
blasting is in progress. Observe restrictions, and
follow any regulations or rules.
The Health Industry Manufacturers Association and
the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
If you have any reason to suspect that
interference is taking place, turn off your
phone immediately.
They include:
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel
or chemicals
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to
discuss alternatives.
•
•
•
vehicles using liquefied petroleum gas, such as
propane or butane
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
any other area where you would normally be
advised to turn off your vehicle engine
Other medical devices—If you use any other
personal medical device, consult the manufacturer
of the device to determine if it is adequately
shielded from external RF energy. Your physician
may be able to help you obtain this information.
Using phone with care
Use only in normal position (to ear). Avoid dropping,
hitting, bending, or sitting on the phone.
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals and
health care facilities may be using equipment that is
sensitive to external RF energy.
iv
These guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies in the
following reports:
Avoiding magnetic environments
Keep the phone away from magnets which can
cause improper functioning of the phone.
Keeping phone dry
•
ANSI C95.1 (American National Standards
Institute, 1992)
Keep the phone dry. Damage can result if the
phone gets wet. Water damage is not covered
under warranty.
•
NCRP Report 86 (National Council
on Radiation Protection and
Measurements, 1986)
Resetting the phone
•
ICNIRP (International Commission on
Non-Ionizing Radiation Protection, 1996)
If the screen seems frozen and the keypad does not
respond to keypresses, reset the phone by
completing the following steps:
Your phone complies with the standards set by
these reports and the FCC guidelines.
1. Remove the battery door.
E911 mandates
2. Remove and replace the battery.
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
If the problem persists, return the phone to the
dealer for service.
Accessories
Hearing Aid Compatibility (HAC)
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user. Some hearing devices are
more immune than others to this interference noise,
and phones also vary in the amount of interference
they generate.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts. In August 1996, the U.S. Federal
Communications Commission (FCC) adopted RF
exposure guidelines with safety levels for hand-held
wireless phones.
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all
phones have been rated. Phones that are rated
have the rating on their box or a label on the box.
The ratings are not guarantees and results will vary
depending on the user’s hearing device and
hearing loss. If your hearing device happens to be
vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the
phone with your hearing device is the best way to
evaluate it for your personal needs.
User Guide
v
M-Ratings—Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that
are not labeled. M4 is the better/higher of the
two ratings.
T-Ratings—Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with
a hearing device’s telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all
hearing devices have telecoils in them.)
Hearing devices may also be measured for
immunity to this type of interference. Your hearing
device manufacturer or hearing health professional
may help you choose the proper rating for your
mobile phone. The more immune your hearing aid
is, the less likely you are to experience interference
noise from mobile phones.
For more information about hearing aid
compatibility, visit the FCC's Consumer &
Governmental Affairs Bureau Web site at
Kyocera Wireless Corp.
To purchase accessories, visit
vi
TABLE OF CONTENTS
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1
Phone battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Phone overview . . . . . . . . . . . . . . . . . . . . . . . . . .3
Main menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Basic navigation . . . . . . . . . . . . . . . . . . . . . . . . . .7
Guide conventions . . . . . . . . . . . . . . . . . . . . . . . .7
7
Messaging . . . . . . . . . . . . . . . . . . . . . . . . 25
Text messages . . . . . . . . . . . . . . . . . . . . . . . . . .25
Multimedia messages. . . . . . . . . . . . . . . . . . . . . 26
Email messages . . . . . . . . . . . . . . . . . . . . . . . . . 29
Instant messages . . . . . . . . . . . . . . . . . . . . . . . . 29
Erase messages . . . . . . . . . . . . . . . . . . . . . . . . . 29
Working with messages . . . . . . . . . . . . . . . . . . .29
Message settings . . . . . . . . . . . . . . . . . . . . . . . . 31
2
Basic Functions. . . . . . . . . . . . . . . . . . . . . 8
Powering up. . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Making phone calls . . . . . . . . . . . . . . . . . . . . . . .8
Answering phone calls . . . . . . . . . . . . . . . . . . . . .8
Ending phone calls. . . . . . . . . . . . . . . . . . . . . . . .9
Verifying your phone number. . . . . . . . . . . . . . . .9
Activating voice dialing. . . . . . . . . . . . . . . . . . . . .9
8
9
@metro . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Applications shopping and downloading . . . . . . 34
Changing your @metro settings . . . . . . . . . . . . . 34
Using Online Help . . . . . . . . . . . . . . . . . . . . . . . 34
MetroWEB. . . . . . . . . . . . . . . . . . . . . . . . . 35
Launch MetroWEB. . . . . . . . . . . . . . . . . . . . . . . 35
Use browser options . . . . . . . . . . . . . . . . . . . . . 35
Search for a Web site. . . . . . . . . . . . . . . . . . . . . 35
Use a bookmark . . . . . . . . . . . . . . . . . . . . . . . . 35
Check Web alerts. . . . . . . . . . . . . . . . . . . . . . . . 36
Set a Web prompt . . . . . . . . . . . . . . . . . . . . . . . 36
3
Call Features . . . . . . . . . . . . . . . . . . . . . . 10
Volume control . . . . . . . . . . . . . . . . . . . . . . . . .10
Hold call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . .10
1-Touch dialing . . . . . . . . . . . . . . . . . . . . . . . . .11
Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Roaming calls . . . . . . . . . . . . . . . . . . . . . . . . . .11
Emergency services . . . . . . . . . . . . . . . . . . . . . .12
Airplane mode . . . . . . . . . . . . . . . . . . . . . . . . . .12
10 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Menu options. . . . . . . . . . . . . . . . . . . . . . . . . . .37
Bluetooth® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Voice Features . . . . . . . . . . . . . . . . . . . . . . . . . .46
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Phone information. . . . . . . . . . . . . . . . . . . . . . . 51
4
5
6
Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . 13
Text entry modes . . . . . . . . . . . . . . . . . . . . . . . .13
Text entry quick reference . . . . . . . . . . . . . . . . .15
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . 16
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Viewing Contacts list. . . . . . . . . . . . . . . . . . . . . .18
Adding contacts . . . . . . . . . . . . . . . . . . . . . . . . .18
Working with contacts . . . . . . . . . . . . . . . . . . . .19
Contact groups. . . . . . . . . . . . . . . . . . . . . . . . . .23
Searching contacts . . . . . . . . . . . . . . . . . . . . . . .23
Contacts count . . . . . . . . . . . . . . . . . . . . . . . . . .24
11 Media Gallery . . . . . . . . . . . . . . . . . . . . . . 52
Accessing folders. . . . . . . . . . . . . . . . . . . . . . . . 52
Browsing images . . . . . . . . . . . . . . . . . . . . . . . . 52
Browsing tones . . . . . . . . . . . . . . . . . . . . . . . . . 52
User Guide
vii
12 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 53
Camera mode options. . . . . . . . . . . . . . . . . . . . 53
Camera indicators and icons. . . . . . . . . . . . . . . 54
13 Tools & Games. . . . . . . . . . . . . . . . . . . . . 55
Brick attack . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Voice memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Tip calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
World clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
14 Voice Commands. . . . . . . . . . . . . . . . . . . 61
Voice dial list . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Voice commands. . . . . . . . . . . . . . . . . . . . . . . . 61
15 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 63
Customer support . . . . . . . . . . . . . . . . . . . . . . . 63
Qualified service . . . . . . . . . . . . . . . . . . . . . . . . 64
Phone accessories. . . . . . . . . . . . . . . . . . . . . . . 64
Become a product evaluator . . . . . . . . . . . . . . . 64
16 Consumer Limited Warranty. . . . . . . . . . 65
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
viii
1
GETTING STARTED
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
Phone battery
Installing the battery
To install the battery:
To charge the battery:
1. With the back of the
phone facing you,
1. Connect the AC adapter
to the jack on the upper
side of the phone.
locate the side notches
at the top of the phone.
2. Plug the adapter into a
2. Slide your fingernail
into one of the notches
to unsnap the back
cover.
wall outlet.
The battery icon in the upper-right corner of the
screen shows whether the phone is:
•
•
•
Charging (animated icon)
Partially charged
Fully charged
3. Place the battery in the
phone casing with the
metal contacts toward
the top of the phone.
Warning: The battery does not charge if you are
in a call while it is connected to an AC adapter.
4. Fit the bottom of the
back cover into the
shape at the bottom of
the battery well.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
5. Press the back cover
until it snaps into place.
Note: To remove the battery, make sure the
phone is turned off.
User Guide
1
•
•
Replace the battery only with another qualified
battery. Use of an unqualified battery may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a replacement battery is compatible, contact
customer support.
Promptly dispose of used batteries in
accordance with local regulations and recycle
if possible. Do not dispose as household waste.
Supervise all battery usage by children.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you suspect
battery damage, take it to a service center
for inspection.
Battery care
General safety guidelines
•
•
Do not disassemble or open the battery.
Do not crush, bend, deform, puncture, or
shred the battery.
•
•
Do not attempt to insert foreign objects into
the battery.
Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
•
•
•
Always keep the battery between 15°C and
25°C (59°F and 77°F). Do not expose the
battery to extremes of temperature, fire, or
other hazards such as a cooking surface, iron,
or radiator.
•
Improper battery use may result in fire,
explosion, or other hazard.
•
•
•
Never use any damaged battery.
Common causes of battery drain
Only use the battery for its intended phone.
Only use the battery with a qualified charger.
Use of an unqualified battery charger may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about
whether a charger is qualified, contact
customer support.
•
•
•
Playing games or using the Web.
Keeping backlighting on.
Operating in digital mode when far away from
a base station or cell site.
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
High earpiece and ringer volume settings.
Repeating sound, vibration, or lighted alerts.
•
•
•
Do not short-circuit the battery or allow
metallic conductive objects—such as keys,
coins, or jewelry—to contact the
battery’s terminals.
•
•
2
Phone battery
Phone overview
Getting to know your phone
The following illustration shows the phone in open position.
1. Earpiece speaker.
2. Home screen.
3. Navigation key scrolls through lists and text entry fields
and accesses shortcuts from the home screen.
4. Left softkey accesses menus and functions.
5. Back key returns you to the previous screen and erases
characters in text entry.
6. Send key starts or answers a call. Press once to display the
All calls list and twice to redial the last number dialed.
Press and hold to activate voice command.
7. Keypad for entering numbers, letters, or symbols.
8. Shift * key changes the text mode in text entry.
9. 0 Next key cycles through word choices during text entry.
10. OK key selects a menu item or option.
11. Right softkey accesses @metro and other menu options.
12. Speakerphone key activates the speakerphone and
answers incoming calls.
13. End key turns the phone on and off, ends a call or
browser session, and returns you to the home screen.
14. Space # key enters a space during text entry. Press and hold to activate or deactivate Silent mode.
15. Microphone.
User Guide
3
The following illustration shows the phone in closed position. With the phone closed, the keys are locked
to prevent accidental key presses.
1. Jack for hands-free headset only (sold separately).
2. Indicator light.
3. Volume key for raising or lowering speaker volume.
4. External screen for displaying time, caller ID, signal, and
battery strength.
5. Jack for AC adapter (included) and data cable
(sold separately).
6. Camera/Walkie-Talkie key: Long press for camera, and
short press brings up ChatLINK Walkie-Talkie
(if activated on your phone).
7. External speaker.
Warning: Inserting an accessory into the incorrect jack damages the phone.
Putting on wrist strap
Common keys
To put on a wrist strap:
The following list the frequently-pressed keys.
Throughout this user guide, these keys are
referred as follows:
1. With the back cover
open, thread the strap
through the eyelet.
Navigation
key
Send key (also referred
to as the Call key)
OK key
End key (also referred
to as the Power key)
2. Insert the other end of
the strap into the
Left softkey
Back key
beginning end loop and
tighten the strap.
Right softkey
Speakerphone key
4
Phone overview
Screen icons
These icons may appear on your phone’s screen:
New voice message.
The phone is operating in IS95 digital mode.
New voice and text message.
The phone is set to light up instead of ring.
The phone is operating in IS2000 (1X)
digital mode.
The phone is receiving a signal. You can make
and receive calls. Fewer bars indicate a
weaker signal.
The phone is set to vibrate or to vibrate and
then ring.
A call is in progress.
The speakerphone is on.
The phone has a standard speed data
connection.
Position location is set to your service
provider and to emergency services.
The phone is not receiving a signal. You
cannot make or receive calls.
Position location is set to emergency
services only.
Content is DRM protected.
The phone is in camera mode.
Data service is available and active on your
phone. Check with your service provider
for availability.
The phone is set to auto answer.
The phone is in privacy mode, accessing a
secure Web site or with files locked.
(blinking) The phone is sending
high-speed data.
The alarm clock is set.
(blinking) The phone is receiving
high-speed data.
The battery is fully charged. The more black
bars, the fuller the charge.
Data service is available, but the phone
is dormant.
Bluetooth wireless technology is
enabled (On).
The phone is roaming outside of its home
service area.
New text message.
User Guide
5
Main menu
The contents of the main menu are as follows:
Recent Calls
All
Incoming
Outgoing
Missed
Messaging
New Text Msg
New Pic Msg
Email
IM
Voicemail
Inbox
Web Alerts
Sent Msgs
Outbox
Settings
Bluetooth
Sounds
Tools & Games
Brick Attack
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Stopwatch
World Clock
Display
Convenience
Voice Features
Accessories
Network
Security
Phone Info
Erase Call List
Call Timer
Contacts
View All
Add New
Saved Msgs
Drafts
Msg Settings
Erase Msg
View Groups
Speed Dial List
Voice Dial List
Contacts Count
Media Galley
Images
Tones
Camera
@metro
Launches the Camera
Launches @metro
MetroWEB
Launches the browser
Note: The menu items on your phone can change depending on the services provided. Check with your
service provider.
6
Main menu
Basic navigation
You press your phone keys to access the various
menus and other features of your phone. Some of
the basic frequently-used keys are as follows:
Guide conventions
In this guide the following conventions are used
when describing phone features.
Select means to press the left or right softkey, or
the OK key to select an item on the display. For
example, “select Menu” tells you to physically
press the left softkey to choose Menu from
the display.
•
Left softkey: Selects items that appear on the
lower left of the display. At the home screen,
you can select Menu.
•
Right softkey: Selects items that appear on
the lower right of the display. At the home
screen, you can select @metro.
Press means to press a phone key. For example,
“press the Send key to make a phone call” tells
you to press the Send key on your phone.
•
•
OK key: Selects a menu item.
Navigation key: Scrolls through menus and
options. You can access the following
shortcuts from the home screen.
Scroll means to press the Navigation key to move
though a list on the display. For example, “scroll
through your Contacts list to choose a contact”
means to press the Navigation key up or down to
scroll through the list on the display.
–
–
–
–
Scroll left to launch Menu > MetroWEB.
Scroll right to launch Menu > @metro.
Scroll up to access Menu > Contacts.
Scroll down to access Menu >
Messaging.
The greater than symbol “>” tells you to select an
option from a menu or list. For example,
“Menu > Settings” means to:
•
•
Back key: Returns to the previous menu level.
End/Power key: Returns to the home screen.
1. At the home screen, press the left softkey to
select Menu.
2. Scroll to the Settings option.
3. Press the OK key to select Settings.
User Guide
7
2
BASIC FUNCTIONS
This section explains basic functionality of your
phone. For more detailed explanations of your
phone’s features, refer to the later chapters.
Call using contacts
At the home screen:
1. Select Contacts to open your Contacts list.
2. Highlight a contact and press the Send key.
Powering up
To turn on your phone, press and hold the End
key and wait until the phone display lights up.
Call using voice commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page 61.
To turn off your phone, press and hold the End
key until the phone turns off.
Making phone calls
Redial a number
At the home screen:
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
1. Press the Send key once to open your
call history.
2. Highlight a phone number or contact and
When the phone has been idle for a while with no
signal, it changes to power save mode. When you
see “Power Save” on your phone’s screen, press
any key to return to normal operating mode.
press the Send key.
Tip: To redial the last number called, received or
missed, press the Send key twice.
You can make a phone call in one of the
following ways.
Answering phone calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts list, the contact’s
name appears.
Call using numbers
At the home screen:
1. Enter a phone number.
2. Press the Send key.
8
Powering up
There are several ways you can answer a
phone call:
Answer using the Send key
Press the Send key or any key with Any Key
Answer enabled. For more information, see “Any
key answer” on page 46.
Answer using speakerphone
Press the Speakerphone key.
Answer using flip
You can set the phone to answer immediately
when you open the flip. For more information,
see “Open to answer” on page 45.
Ending phone calls
To end a phone call, press the End key or
close the flip.
Verifying your phone number
To verify your phone number, select Menu >
Settings > Phone Info > Build Info.
Activating voice dialing
At the home screen:
1. Press and hold the Send key.
2. Follow the prompts.
For more information, see “Voice Commands” on
page 61.
User Guide
9
3
CALL FEATURES
This chapter describes call features such as
volume, holding calls, speed dialing, and
other features.
For more information, see “Open to answer” on
page 45. With the flip open, you can also press the
End key or select Silence to silence the phone
without answering the call. To silence the phone
and answer the call, press the End key and then
press the Send key.
Volume control
You have several ways to control the volume of
your phone.
In the absence of voicemail, this feature drops
the call.
Adjust volume during a call
To adjust the earpiece volume during a call, press
the Volume key up or down.
Hold call
Use this feature to place incoming calls on hold
until you are ready to answer them. See “Hold
call” on page 44.
Use the speakerphone
Your phone has a built-in speakerphone.
To turn on the speakerphone, press the
Speakerphone key.
Speed dialing
Use the Speed Dial feature to assign a one- or two-
digit shortcut to a contact. Before you can use
speed dialing, you must save a phone number as a
contact and assign a speed dial location to it. See
“Contact number” on page 20.
The speakerphone icon appears on the home
screen when the speakerphone is on.
To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key during
an incoming call, you will answer the call.
To call a contact that has a speed dial location.
1. Enter the one- or two-digit speed
dial location.
Silence an incoming call
2. Press the Send key.
Press the Volume key to silence an incoming call,
especially if you set the phone to answer
immediately when you open the flip.
10
Volume control
If you see only the voicemail message icon:
1-Touch dialing
This feature is the fastest way to speed dial a
contact that has a speed dial location.
See “1-Touch dialing” on page 44.
1. Select Menu > Messaging > Voicemail.
2. If you have set up your voicemail, select Call
to call your voicemail number.
3. Follow the system prompts to retrieve
Voicemail
the message.
Configure your voicemail
Set voicemail alert
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
You can set the phone to beep or vibrate every five
minutes to remind you that you have voicemail.
For more information, see “Alerts” on page 31.
Roaming calls
Control roaming calls
You can restrict your phone from making a call
when roaming. See “Roam option” on page 48.
1. Press and hold the 1 key.
2. Follow the system prompts to create a
password and record a greeting.
Set roaming alert
Check voicemail
You can set the phone to alert you when you roam
outside of your home service area. See “Roaming
service alert” on page 48.
When a voice message is received, your screen
displays a notification along with a voicemail
message icon at the top of your screen. The
symbol flashes if the message is urgent. If you see
a notification:
Set roam ringer
You can set a ringer to indicate when an incoming
call is subject to roaming charges. See “Roam
ringer” on page 40.
1. Select Call to call your voicemail number.
2. Follow the system prompts to retrieve the
message.
Set call guard
Note: To clear the screen without checking
messages, select Ignore.
You can set the phone to warn you before you
answer or place a call while roaming. See “Roam
call alert” on page 49.
User Guide
11
Emergency services
Call emergency service
You can call an emergency code, even if your
phone is locked or your account is restricted.
When you call, your phone enters Emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
To dial an emergency code:
1. Enter your 3-digit emergency code.
2. Press the Send key.
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described.
Exit emergency services
When you have completed the emergency call:
1. Select Exit.
2. Select Exit again to confirm your choice.
Note: To determine who has access to your
location, see “Location” on page 49.
Airplane mode
While in an airplane, you can set your phone to
Airplane mode where your phone does not emit
RF signals. See “Airplane mode” on page 43.
12
Emergency services
4
TEXT ENTRY
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
There are six text entry modes:
•
•
•
•
•
•
Insert QuickText: quick text mode.
Case Change: case change mode.
Normal Alpha: normal alpha mode.
Rapid Entry: rapid entry mode.
Numbers Only: numbers only mode.
Add Symbol: symbol mode.
Text entry modes
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you are in numbers only mode.
When entering a name for a contact, you are in
normal alpha mode.
Enter numbers (123)
•
To enter a number while in numbers only
mode, press a number key once.
The text entry screen has the following features:
1. The number of remaining characters you can
type. Allowed length of messages can vary
depending on your service.
•
To enter a number while in normal alpha or
rapid mode, press and hold a number key
until the number appears on the screen.
2. Text entry fields.
Enter words by letter (ABC)
1. Press a key once for the first letter, twice for
3. Current capitalization setting.
4. Current text entry mode.
the second letter, and so on.
2. Wait for the cursor to move right and enter
the next letter.
Note: To enter a space, press the Space # key.
User Guide
13
Enter words quickly (ezi)
Change default text entry mode
When you press a series of keys using rapid
mode, your phone checks its dictionary and
guesses at the word you are trying to spell.
You can change the default text entry mode when
creating a text message. For more information,
see “Default text” on page 32.
1. For each letter of the word you want, press
the key once. For example, to enter the word
“any” press the 2 > 6 > 9 keys.
Change modes
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in normal alpha mode, you must change to
numbers only mode, enter the numbers, and then
change back to normal alpha mode to complete
the address.
2. If the word doesn’t match what you want,
press the 0 Next key to check other
word matches.
3. When you see the word you want, press
the Space # key.
To change text entry modes, press and hold the
Shift * key until the icon for your desired mode
appears at the top of the screen. You can also
select Options and a different mode.
Enter symbols
While entering text in normal alpha mode, you
can enter symbols by pressing the 1 key until you
see the symbol you want. Using this method, you
have access to the following symbols:
Capitalization
You can change capitalization at any time while
entering text. Simply press the Shift * key to
choose upper or lower case while in normal
alpha mode.
.
@
?
!
-
,
&
:
‘
To access the full set of symbols:
1. From the text entry screen, select
Options > Add Symbol.
2. Scroll up or down to view the list of symbols.
3. Press the number key corresponding to the
symbol to enter it.
14
Text entry modes
Text entry quick reference
This table gives instructions for entering letters, numbers, and symbols.
To..
Do this...
Enter a letter
Use normal alpha mode and press a key until you see your desired letter. For
more options, see “Text entry modes” on page 13.
Enter a number
Enter a symbol
Use numbers only mode and press a key. For more options, see “Text entry
modes” on page 13.
In either normal alpha mode, press the 1 key until you find your desired
symbol. For more options, see “Text entry modes” on page 13.
Enter a space
Press the Space # key.
Erase a character
Press the Back key.
Erase all characters
Move cursor right or left
Move cursor up or down
Change text entry modes
Capitalize any letter
Lowercase any letter
Initial caps
Press and hold the Back key.
Scroll left or right.
Scroll up or down.
Press and hold the Shift * key.
In normal alpha mode, press the Shift * key. Choose uppercase.
In normal alpha mode, press the Shift * key. Choose lowercase.
In normal alpha mode, press the Shift * key. Choose sentence case.
Select soft options on screen Press the appropriate left or right softkey.
User Guide
15
5
RECENT CALLS
–
–
Send Picture Msg sends a multimedia
message to the number.
Erase Record deletes the call from the
call list.
Call lists
Details on the calls you made, received, or missed
are stored in the Recent Calls list and are
identified by the following icons:
Note: If the phone number is classified as
“secret,” you must enter your four-digit lock code
to access it.
Outgoing call
Incoming call
Missed calls
Missed call (flashing)
When you have missed a call, “Missed Call”
appears on your screen. You can do one of
the following:
View recent calls
1. Select Menu > Recent Calls and one of
•
•
To clear the screen, select OK.
To view the call details, select Calls and press
the OK key.
the following:
–
–
–
–
All displays all calls made or received.
Incoming displays calls answered.
Outgoing displays calls made.
Missed displays calls received, but
not answered.
•
To return the call, select Calls and press the
Send key.
Set alert for missed calls
You can set an alert to beep every five minutes
after you have missed a call. See “Alerts” on
page 31.
2. Highlight a recent call.
3. Press the Send key to call the number or
select Options and one of the following:
–
Save creates a new contact or View
displays the contact details.
Send Text Msg sends a text message to
the number.
–
16
Call lists
•
Outgoing tracks calls you have made since
you last reset this timer. To reset this timer to
zero, select Reset.
Erase call list
You can erase your phone’s call lists.
1. Select Menu > Recent Calls >
Erase Call List > All, Incoming, Outgoing,
or Missed.
Time your calls
Your phone can alert with a short beep ten
seconds before each minute passes during a call.
For more information, see “Minute alert” on
page 45.
2. Select Yes.
Call timers
View call timers
To track the number and duration of calls
made and received on your phone, select
Menu > Recent Calls > Call Timer and one of
the following:
•
All tracks all calls you have made and
received. You cannot reset this timer.
Recent tracks all calls you have made and
received since you last reset this timer. To
reset this timer to zero, select Reset.
Home tracks calls you have made and
received in your home service area since you
last reset this timer. To reset this timer to
zero, select Reset.
Roam tracks calls you have made and
received while roaming since you last reset
this timer. To reset this timer to zero,
select Reset.
•
•
•
•
Incoming tracks calls you have received since
you last reset this timer. To reset this timer to
zero, select Reset.
User Guide
17
6
CONTACTS
Use your phone’s Contacts list to store
–
–
–
–
Erase Contact to erase the contact.
information about a person or company. Each
contact entry can have up to six phone numbers,
two email addresses, two Web addresses, two
street addresses, and a space for notes.
Send as vCard to send contact as a vCard.
Send All to send all contacts via Bluetooth.
Contacts Menu to access your contacts.
Adding contacts
Viewing Contacts list
To view existing contacts in your phone, select
Menu > Contacts > View All. Your Contacts list
is listed alphabetically.
Add contact from home screen
To add a contact to your Contacts list:
1. From the home screen, enter a phone
Tip: You can also select Contacts from the home
number to save (including the area code).
screen to view the directory.
2. Select Save > Save New Contact.
Scroll to a contact and do one of the following:
3. Enter a name for the contact. For more
•
Press the Send key to call the
highlighted contact.
information, see “Text Entry” on page 13.
4. Enter additional phone numbers, email
addresses, Web addresses, and notes, if
needed. Scroll up or down to move through
the contact fields.
•
Press the OK key to view the highlighted
contact’s details.
•
•
Select New to add a new contact.
Select Options and choose one of
the following:
5. When you are done entering the information,
select Save.
–
–
–
Call to make a call.
Send Text Msg to send a text message.
Send Pict Msg sends a
multimedia message.
–
–
View Contact to view contact details.
Edit Contact to edit contact details.
18
Viewing Contacts list
Add contact from contacts menu
To add a contact to your Contacts list:
1. Select Menu > Contacts > Add New.
Working with contacts
Contact details
To edit the details of an existing contact:
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, select Edit.
2. Enter a name for the contact. When you are
done, scroll down to move to the next field.
For more information, see “Text Entry” on
page 13.
3. Enter a primary number for the contact.
4. Edit or add phone numbers, email
addresses, Web addresses, and notes.
Scroll up or down to move through the
contact fields.
4. Enter additional phone numbers, email
addresses, Web addresses and note, if
needed. Scroll up or down to move through
the contact fields.
5. When you are done entering the information,
select Save.
5. When you are done entering information,
select Save.
Contact name
Add code or extension
To work on the name of an existing contact:
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
When you save the phone number of an
automated service, you may include a pause
to stop dialing, where you can wait to dial
an extension.
3. At the contact’s detail screen, scroll to the
contact name.
1. From the home screen, enter a
4. Select Options and one of the following:
phone number.
–
Ringer assigns a specific ringer to
the contact.
2. Select Options and a type of pause:
–
Time Pause causes the phone to stop
dialing for two seconds.
–
Picture assigns a specific picture to
the contact.
–
Hard Pause causes the phone to stop
dialing until you select Options >
Release while making the call.
–
–
Erase Contact deletes the entire contact.
Send as vCard sends the contact as
a vCard.
3. Enter the remaining numbers.
4. Complete the contact and select Save.
User Guide
19
Contact number
Contact email address
To work on the number of an existing contact:
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
To work on the email address of an
existing contact:
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, scroll to a
contact number.
3. At the contact’s detail screen, scroll to ‘a
contact email address.
4. Select Options and one of the following:
4. Select Options and one of the following:
–
–
–
Call calls the contact.
Send Text Msg sends a text message.
Send Pict Msg sends a
multimedia message.
–
–
–
–
–
–
Send Text Msg sends a text message
(depending on your service provider).
Send Pict Msg sends a
multimedia message.
View Address displays the
–
Prepend displays the contact’s detail
screen for you to change the number
(adding an area code) or other data of
the contact.
Add Speed Dial adds the number to your
speed dial list.
View Number displays the number.
Erase Number deletes the number from
the contact.
Secret/Not Secret makes the number
secret, hiding it from the screen until you
enter the lock code.
email address.
Add to Group adds the email address to
the business, personal, or custom group.
Erase Address deletes the email address
from the contact.
Secret/Not Secret makes the email
address secret, hiding it from the screen
until you enter the lock code.
Send as vCard sends the contact as
a vCard.
–
–
–
–
–
–
–
–
Primary Number makes this number the
primary number for the contact.
Send as vCard sends the contact as
a vCard.
Add to Group adds the number to the
business, personal, or custom group.
20
Working with contacts
4. Select Options and one of the following:
Contact Web address
To work on the Web address of an
existing number.
–
–
–
View Address displays the
street address.
Erase Address deletes street address
from the contact.
Secret/Not Secret makes the street
address secret, hiding it from the screen
until you enter the lock code.
Send as vCard sends the contact as
a vCard.
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, scroll to a
contact Web address.
4. Select Options and one of the following:
–
–
Launch Web launches the Web browser
and goes to the Web address.
Send Pict Msg sends a
Contact note
–
multimedia message.
To work on the note of an existing number:
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
–
–
View Web displays the Web address.
Erase Web deletes Web address from
the contact.
Secret/Not Secret makes the Web
address secret, hiding it from the screen
until you enter the lock code.
Send as vCard sends the contact as
a vCard.
3. At the contact’s detail screen, scroll to the
–
–
contact note.
4. Select Options and one of the following:
–
–
View Note displays the note.
Erase Note deletes the note from
the contact.
Contact street address
To work on the street address of an
existing number:
–
–
Secret/Not Secret makes the note secret,
hiding it from the screen until you enter
the lock code.
Send as vCard sends the contact as
a vCard.
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, scroll to a
contact street address.
User Guide
21
Assign ringer
Assign number type
To assign a ringer to a contact:
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
After you assign a number type, an icon appears
in front of the contact number.
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, select Edit.
3. At the contact’s detail screen, scroll to the
contact name.
4. Select Options > Ringer > Assign Ringer
and a ringer from the list. Scroll to play
the ringers.
4. Press down twice to scroll to the number
type dropdown and press the OK key.
5. Select General, Work, Home, Mobile,
Pager or Fax. The appropriate icon appears
next to the number in your phone lists.
Assign picture
To assign a picture to a contact:
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
6. Select Save.
Send a vCard
To send contact information as a message:
1. Select Menu > Contacts > View All.
2. At the Contacts list, select a contact.
3. At the contact’s detail screen, scroll to the
contact name.
4. Select Options > Picture and one of
the following:
3. Select Options > Send as vCard and one of
–
Assign Picture assigns a picture to the
contact. Select Camera Images or
Images > Saved Images or Caller IDs
to choose what kind of picture to assign.
Unassign Picture removes the assigned
picture from the contact.
the following:
–
–
–
via MMS
via Bluetooth
To Printer
–
–
4. Complete the appropriate task to send the
contact information.
Take Picture Now activates
Tip: You can select Menu > Contacts >
View All > via Bluetooth to send all of your
contacts via Bluetooth.
camera mode.
22
Working with contacts
Customize groups
Contact groups
1. Select Menu > Contacts > View Groups.
2. At the Groups list, select a group.
3. Select Options and one of the following:
You can assign your contacts to groups.
Your phone comes with two default groups,
Business and Personal. You can also create
your own groups.
–
–
–
–
Ringer assigns a ringer to the group.
Picture assigns a picture to the group.
Erase deletes the group.
1. Select Menu > Contacts > View Groups.
2. Select New.
3. Enter a name for the group, and select Next.
Edit enables editing the group.
4. Select the contacts from the list provided.
A check mark appears next to each
selection you make. You can also
remove checkmarks.
Searching contacts
To find a phone number or contact, you can
search the Contacts list, check the Frequent List,
or use Fast Find.
5. After selecting your desired contacts,
select Done.
Contacts list
To search your Contacts list, select Menu >
Contacts and one of the following:
Your new group appears the next time you view
your groups.
Use groups
•
•
•
View All lists the entire Contacts list.
View Groups lists the existing groups.
Speed Dial List or Voice Dial List shows the
contacts on the specified list.
1. Select Menu > Contacts > View Groups.
2. At the Groups list, scroll to a group.
3. Select Options and one of the following:
You can also use the Contacts shortcut from the
home screen to view the Contacts list. To quickly
get down the list, enter the first letter of the
contact. You can skip to that letter of the alphabet.
–
–
–
–
–
View displays the group details.
Edit enables editing the group.
Erase deletes the group.
Send Text Msg sends a text message.
Send Pict Msg sends a
multimedia message.
–
Send as vCard sends the group as
a vCard.
User Guide
23
Frequent list
With Frequent List enabled, you can see 15 of
your most frequently called contacts. For more
information, see “Frequent list” on page 45.
Fast find
With Fast Find enabled, you can press one or two
keys to view close matches of the number. For
more information, see “Fast find” on page 45.
Contacts count
To check the status of the stored contacts on the
phone (with a maximum of 500), select Menu >
Contacts > Contacts Count.
24
Contacts count
7
MESSAGING
This chapter describes how to send, receive, and
erase messages from your phone. For information
on voicemail messages, see “Voicemail” on
page 11.
Include QuickText and other extras
During text entry, you can insert prewritten text
(QuickText), symbols, or contacts.
1. From the text entry screen, select Options
Note: The features and menus described in this
chapter may vary depending on services available
in your area. Check with your service provider for
details and possible usage charges.
and one of the following:
–
–
Insert QuickText inserts prewritten text
from a list.
Add Symbol inserts a symbol.
Press the corresponding number to
select a symbol.
Text messages
You can only send text messages to phones
capable of receiving them.
2. Complete your message.
3. Select Send.
Create a text message
1. Select Menu > Messaging > New Text Msg.
Use text message options
When you are ready to send a text message, you
have several options for how and when you want
it received.
2. At the Send To field, enter a recipient’s
phone number by either:
–
Select Options > Recent List,
Recent Calls, Contacts or Groups to
access your stored contacts.
Enter a new address manually. See “Text
Entry” on page 13.
1. After composing your message, select
Options and one of the following:
–
–
–
Save Message saves the message to the
Drafts folder.
–
Save QuickText saves your composed
message as a prewritten message.
Settings > Msg Receipt > Request
alerts you when a recipient has received
your message.
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses. If you select stored contacts, this
is done automatically. Scroll down to move
to the next field when done.
–
Settings > Set Priority > Normal or
Urgent sets the message priority.
3. At the Message field, enter the message.
4. Select Send.
User Guide
25
–
–
–
Settings > Callback Number sets your
callback number. Enter a number and
select OK.
Settings > Send Later > Immediate
or Set Time specifies the time to send
the message.
Settings > Validity Period > Set Time
sets a defined expiration time limit for
a message.
View a text message
The options available when viewing a text message
may vary. Check with your service provider.
1. Select Menu > Messaging > Inbox.
2. Select a message to view. If the message is
long, scroll down to view entire message.
3. Select Reply to create a response message or
Options and one of the following:
–
–
–
Erase deletes the message.
2. After selecting options, select Close.
3. Complete your message.
4. Select Send.
Forward forwards the message.
Reply with Copy replies to the message
with a copy of the original attached.
Save Message saves the message to the
Saved folder.
Save QuickText saves the message text
as preset text, which can be inserted into
other messages. Graphics are not saved.
Lock protects the message from
accidental deletion.
–
–
Retrieve a text message
When a text message is received, your phone
displays a notification and the message icon
appears at the top of your screen. The message
icon flashes if the message is urgent. Urgent
messages are also marked in the Inbox.
–
–
Sender displays the sender information.
Message notifications
If you see a message notification, select Inbox to
view messages. Scroll to a message and select
View to open it.
Multimedia messages
You can only send multimedia messages to
phones that are capable of receiving them or to
email addresses. Multimedia messages have a
predetermined character and file size limit. When
you reach the character and file size limit for a
single multimedia message, you must edit the
message to meet the size limitation.
To clear a message notification, select Ignore.
Message icons
If you see the message icon, select Menu >
Messaging > Inbox. Scroll to a message and
select View to open it.
Note: Multimedia messaging is not available on
all phones. Check with your service provider.
26
Multimedia messages
6. At the Sound field, select Options and one of
Create a multimedia message
1. Select Menu > Messaging > New Pic Msg.
the following to attach a file:
–
Record Sound to instantly record a
sound and attach it.
2. At the To, CC (to send a copy of the
message), and BCC (to send a blind copy)
fields, do one of the following to enter the
recipient’s phone number or email address.
Scroll down to move to the next field
when done.
–
Media Gallery to attach an existing file
from Saved Sounds, Ringers or
Voice Memos.
7. Select Send.
–
Select Options > Recent List,
Recent Calls, Contacts, or Groups to
access your stored contacts.
Enter the phone number or email
address manually. See “Text Entry” on
page 13.
Use multimedia message options
When you are ready to send a multimedia
message, you have several options for how and
when you want it received.
–
1. While composing your message, select
Options and one of the following:
Note: You can message up to ten recipients
at once. Use a comma or spaces to separate
addresses. (If you select stored contacts,
your phone does this automatically.)
–
–
Insert Contacts adds contacts to
your message.
Insert QuickText adds prewritten text to
your message.
3. At the Subject field, enter a subject. Scroll
down to move to the next field when done.
–
–
Preview Message plays your message.
4. At the Message field, enter a message. Scroll
Save Message saves the message to the
down to move to the next field when done.
draft folder.
5. At the Image field, select Options and one of
–
–
–
Add Address adds additional recipients to
your message.
the following to attach a file:
–
–
Take a picture to instantly take a photo
and attach it.
Media Gallery to attach an existing file
from Camera Pictures or Images.
Save Address saves a recipient’s address
to your phone if it is new.
Settings sets the various message settings
such as Msg Receipt, Set Priority,
Send Later, and Slide Interval.
Scroll down to move to the next field
when done.
User Guide
27
2. After setting options, press the Back key to
Note: If a multimedia message is received during
a call, the phone displays a notification after the
call ends.
return to the message window if necessary.
3. Complete your message.
4. Select Send.
View a multimedia message
When a multimedia message is received, the
message icon appears at the top of your screen.
The message icon flashes if the message is urgent.
All notifications or messages are stored in the
Inbox regardless of your Auto Retrieve settings.
Retrieve a multimedia message
There are two modes for receiving a multimedia
message on your phone: Auto Retrieve (default)
and Prompt.
Auto retrieve mode
1. Select Menu > Messaging > Inbox.
When a message is received, it is automatically
downloaded onto your phone. A notification
appears when a new message has been
downloaded to your phone. Select one of
the following:
2. Select View to read a message. If the
message is long, scroll down to view the
entire message.
3. Select Reply to create a response message or
Options and one of the following:
•
•
View opens the message.
Later saves the message for you to view later.
–
Mute/Unmute enables or disables
silencing the message.
Note: If a message is received during a call, the
phone downloads the message approximately one
minute after the last key is pressed.
–
–
Erase deletes the message.
Forward forwards the message without
showing the original address, graphic,
sound, and text fields.
Lock avoids erasing the message
accidentally.
Message Info displays the message
information (priority, sender, subject, time
sent and received, and message size).
Replay plays the message again from
the beginning.
Prompt mode
–
–
When a multimedia message is received, it is
not automatically downloaded onto your phone.
A notification appears when a new message
is available for download. Select one of
the following:
–
–
•
•
•
Yes downloads and opens the message.
Erase deletes the message.
Retrieve Later sends the message to the
Inbox for you to download and view later.
Done exits the message.
28
Multimedia messages
–
–
–
Save Picture saves the picture embedded
in the message.
Save Sound saves the sound embedded in
the message.
Save Address extracts email addresses,
phone numbers, and/or URLs from the
sender information and message body.
Save QuickText saves the text in the
message to the QuickText list.
Call calls the message sender.
Save Message saves the message to the
Saved Folder.
Erase a single message
1. Select Menu > Messaging > Inbox,
Sent Msgs, Outbox, Saved Msgs, or Drafts.
2. Scroll to the message you want to erase.
3. Select Options > Erase.
4. At the notification, select Yes to erase
the message.
–
Note: You can erase a scheduled message
from the Outbox, but you cannot cancel delivery
of the message.
–
–
Erase all messages
Note: The options available to you may vary.
Check with your service provider.
1. Select Menu > Messaging > Erase Msg >
Inbox, Outbox, Sent Msgs, Saved Msgs,
Drafts or All.
Email messages
You can send and receive email messages from
your phone. Select Menu > Messaging > Email
to send an email message.
To erase messages from all folders,
select All.
2. At the notification, select Yes to erase
the messages.
Note: Selecting All does not erase
unread messages.
Instant messages
You can send and receive instant messages (IMs)
from your phone. Select Menu > Messaging >
IM to access IM and send an instant message.
Working with messages
This section provides some tips about messaging
with your phone.
Erase messages
It is a good idea to erase old messages to free up
memory in your phone.
You can erase messages as you send or read
them, erasing them one at a time or all at once.
User Guide
29
•
•
Select Ignore to not answer the call but return
to the message screen.
Press the Send key to answer the call and save
the message to the Drafts folder.
Unable to send messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erase
messages” on page 29.
Complete messages in Drafts folder
To continue composing a message in the
Drafts folder:
Appended messages
1. Select Menu > Messaging > Drafts and the
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
message you want to complete.
2. Select Edit.
Important: Your service provider charges you
for each message segment.
3. Complete your message.
4. Select Send.
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down as
you enter characters, until it reaches 0.
View messages in Sent folder
To view messages in the Sent folder, select
Menu > Messaging > Sent Msgs.
If you continue to enter text after this counter
reaches 0, a message segment may be appended.
When you reach the message size limit, you are
prompted to edit the message or alerted that the
message is being appended.
Scroll through the list of messages. One of
the following indicators may appear next to
each message:
The scheduled message was sent and
delivered as scheduled. You cannot
cancel delivery of the message.
Note: Appended messages may not be available
on all phones. Check with your service provider.
The message has been received.
Receive incoming calls while
creating messages
If you receive a call while creating a message
you will receive a notification. You can do
the following:
The message has never been sent or has
not been sent since it was last modified.
You can cancel delivery of the message
The message has been sent to more
than one recipient.
30
Working with messages
View failed or pending messages
Signature
Failed or pending messages are stored in your
Outbox folder. To view messages in the Outbox
folder, select Menu > Messaging > Outbox. Your
list of failed or pending messages appears with the
following symbols.
The signature you create is included at the end of
all outgoing messages, but does not appear in the
message creation screen.
1. Select Menu > Messaging >
Msg Settings > Signature.
2. Enter your signature in the text field.
The message is pending and will be sent
when possible. You can cancel delivery
of the message.
3. Select OK to save the signature.
Note: The characters in the signature
are included in the total character count of
the message.
The message cannot be sent because
service is not available. An alert appears
on your phone if the message cannot
be sent.
Edit Quick Text
Your phone comes with prewritten messages
(preset text), such as “Please call me,” which you
can insert into the body of a text message. You can
edit these messages or create new ones. Your
phone stores up to 40 preset text messages, with
up to 100 characters per message.
Message settings
Messaging settings help configure your phone’s
text message settings.
Alerts
1. Select Menu > Messaging > Msg Settings >
Choose your alerts for voicemail, pages,
or messages.
Edit Quick Text and one of the following:
–
Scroll to a preset text message and
select Edit.
1. Select Menu > Messaging > Msg Settings >
Alerts > Msg Alert, Page Alert, or
Voicemail Alert.
–
Select New Msg to create a new
preset text message.
2. Select an alert.
2. Enter or edit the text.
Note: If you select an alert with an & Remind, the
phone notifies you once when receiving a new
message and notifies you again every five minutes.
To stop a reminder alert, select Ignore.
3. Select Save.
Note: You can also save a message you have
written or received as preset text.
User Guide
31
•
•
Prompt allows you to choose whether to save
your message when you send it.
Enabled saves all outgoing messages to the
Sent Msgs folder.
Auto retrieve
To set your phone to automatically retrieve
multimedia messages, select Select Menu >
Messaging > Msg Settings > Auto retrieve and
one of the following:
Auto-erase
•
Disable turns off auto retrieve. You are
prompted before any multimedia messages
are download.
You can set your phone to erase message
automatically when memory is needed for
incoming messages.
•
Enable turns on auto retrieve.
Select Menu > Messaging > Msg Settings >
Hide or show CC/BCC
Auto-Erase and one of the following:
•
•
Disabled erases no messages.
Inbox Msgs erases old messages in your
Inbox when memory is needed.
To show or hide the CC and BCC fields when you
compose a multimedia message, select Menu >
Messaging > Msg Settings > Hide CC/BCC or
Show CC/BCC.
•
•
Sent Msgs erases old messages in the
Sent Msgs folder when memory is needed.
Both erases old messages in both your Inbox
and Sent folder when memory is needed.
Callback number
Set a callback number to let recipients know
where to call you back.
Default text
1. Select Menu > Messaging > Msg Settings >
You can change the default text entry mode when
creating a text message. This setting applies only
to the Message field, not the Send To field.
Callback Number.
2. Enter number in the text field.
3. Select OK to save the number.
Select Menu > Messaging > Msg Settings >
Save to sent
Default Text and one of the following:
•
•
Normal Alpha to enter text letter by letter.
Rapid mode enter text with word recognition.
To set your phone to automatically save outgoing
messages to the Sent Msgs folder, select Menu >
Messaging > Msg Settings > Save to Sent and
one of the following:
•
Disabled does not save the
outgoing messages.
32
Message settings
Text message receipt
You can request a notification when a recipient
has received your text message.
Select Menu > Messaging > Msg Settings >
Text Msg Receipt > Request.
Picture message receipt
You can request a notification when a recipient
has received your picture message.
Select Menu > Messaging > Msg Settings >
Pic Msg Receipt > Request.
Voicemail number
Set the number your phone calls to
retrieve voicemail. Often your voicemail
number is automatically programmed by
your service provider.
1. Select Menu > Messaging > Msg Settings >
Voicemail Number.
2. Select Edit.
3. Enter the voicemail number. Use Options >
Time Pause or Hard Pause to enter pauses.
4. Select Save.
Multimedia message reply
To set whether to reply to a multimedia message
with a multimedia or text message,
select Menu > Messaging > Msg Settings >
Pic Msg Reply by > Text Msg or Pic Msg.
User Guide
33
8
@METRO
Download ringtones, games, graphics, and more
from @metro. For information on airtime
charges, contact your Wireless Carrier.
–
–
–
Manage Apps displays used and
available memory.
Main Menu View provides options of
how to display the MobileShop menu.
View Log displays applications history.
Applications shopping and
downloading
Using Online Help
1. From the home screen, select @metro >
MobileShop.
Use the Help menu in @metro to view
information about charges, cancelling
subscriptions, buying applications, disabling
applications, and more. From the home screen,
select @metro > Help and one of the listed
options to view the Help information.
2. Scroll down to highlight Catalog and
press the OK key. The Catalog takes a
few moments to load and the Catalog
menu appears.
3. Scroll to browse the Catalog.
4. Follow the instructions to purchase content.
Note: Please check with your Wireless Carrier for
availability of applications.
Changing your @metro settings
Use the Settings menu in @metro to manage,
move, order applications, and much more.
1. From the home screen, select @metro.
2. Scroll right to select Settings and one of
the following:
–
Order Apps downloads applications over
the network.
–
Move Apps moves an application to
a different location.
34
Applications shopping and downloading
9
METROWEB
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
–
–
About Openwave displays information
about your browser version.
Encryption should not be used unless
you are instructed to do so by your
service provider.
UP.Link selects a different browser server.
You can use this option if you have more
than one browser account.
For more information about how airtime is
charged, contact your service provider.
–
Launch MetroWEB
1. Select Menu > MetroWEB.
2. Select OK to continue.
–
Restart restarts the browser.
Search for a Web site
How you search for a Web site depends on your
service provider. For more information, contact
your service provider.
3. To choose a site, scroll to the link and
select Go.
4. When you have finished using the browser,
press the End key to exit.
Use a bookmark
Use browser options
1. Select Menu > MetroWEB.
The following options may appear during a
browser session.
2. Select OK to accept browser fees.
3. From your Web home page, select
•
•
•
•
Home returns you to the main browser
window, or home page.
Add to Bookmarks saves the current location
as a bookmark for easy access.
Bookmarks displays a list of your saved
Web sites.
Bookmarks. A list of bookmarks appears.
4. Enter the number corresponding to the
bookmark you want and press the OK key.
More gives you options for changing how
information is displayed.
–
Show URL displays the entire URL.
User Guide
35
Check Web alerts
Alerts received from a Web site are sent to
your Web Alerts folder. To check them, do
the following:
1. Select Menu > Messaging > Web Alerts.
This action launches the browser inbox.
2. Select OK to accept browser fees.
3. Select an alert and follow the prompts.
Set a Web prompt
You can set a prompt to confirm the start or exit
of the browser. For more information, see “Web
alert” on page 49.
36
Check Web alerts
10 SETTINGS
Menu options
The contents of the Settings menu are as follows:
Bluetooth
On/Off
My Devices
Settings
Display
Wallpaper
Voice Features
Automatic Add
Voice Training
Display Results
Digit Lengths
Voice Wake-Up
Voice Answer
Expert Mode
Network
Privacy Alert
Voice Privacy
Roam/Svc Alert
Roam Option
Set Phone Line
Location
Web Alert
Roam Call Alert
Security
Lock Phone
Screensaver
Main Menu View
My Banner
My Ticker
Backlighting
Brightness
Sounds
Ringers
Roam Ringer Activation
Ringer Mode
Volume
Flip Sounds
Pwr On/Off
Key Sounds
Language
Time/Date Format
Accessories
Headset Sounds
Auto-Answer
TTY Device
Convenience
Airplane Mode
Auto-Hyphen
1-Touch Dialing
Hold Call
Limit Calls
Hearing Aid
Emergency Numbers
Erase Contacts
New Lock Code
Fast Find
Phone Info
Build Info
Icon Keys
Frequent List
Missed Call Alert
Minute Alert
Open to Answer
Any Key Answer
Note: Some features are not available on all phones. Check with your service provider.
User Guide
37
Bluetooth®
When you turn on Bluetooth the first time, you are
prompted to do a device search. Then you can
pair with a device.
The Bluetooth® wireless technology on your
phone enables wireless connectivity with
accessories such as portable or installed
hands-free car kits, headsets, handsets,
Pairing
You must first “pair” your phone with the
computers, PC cards and adapters, PDAs, and
speakers. You must use a Bluetooth wireless
technology device (compatible with Class 2
Bluetooth wireless technology, version 1.2) in
order to use this phone wirelessly. Bluetooth
wireless technology accessories have the
symbol. For additional information on carrier-
supported profiles and third-party accessory
compatibility for Bluetooth wireless technology,
Bluetooth wireless technology enabled device to
allow your phone to communicate with it. Refer to
the following instructions for setting up Bluetooth
wireless technology in conjunction with the user
guide provided with your Bluetooth device.
1. Select Menu > Settings > Bluetooth >
On/Off > On Visible or On Invisible.
2. Prepare the Bluetooth device (Bluetooth
accessory) for pairing as described in the
other device’s user guide.
Turning Bluetooth on
3. Select Menu > Settings > Bluetooth >
My Devices > Find New. Your phone then
searches and detects visible Bluetooth
wireless technology enabled devices in
the vicinity.
You must turn on your phone’s Bluetooth feature
to use it with Bluetooth devices. Select Menu >
Settings > Bluetooth > On/Off and one of
the following:
•
•
•
On Visible allows other devices to find
your phone.
4. With devices found, select Add to see the list.
5. Highlight your desired device and select Add.
On Invisible hides your phone for all devices
except those listed in your My Devices.
Off prohibits your phone from being used
with any Bluetooth device. To prolong battery
life, it is recommended to set Bluetooth to Off
when you are not using it.
Note: When pairing is initiated from another
Bluetooth device, you are prompted to
accept or reject the pairing.
6. If necessary, enter the password provided
in the Bluetooth device’s user guide and
select OK.
38
Bluetooth®
Your phone waits for the device’s response.
With the password accepted, the device
shows in My Devices.
Device list options
You can change or review the information about
each device you paired with your phone.
1. Select Menu > Settings > Bluetooth >
Using Bluetooth
My Devices.
Before you can use the Bluetooth wireless
technology functions of your phone, you must get
your phone ready to communicate with a device.
This is called “connecting.”
2. Highlight your desired device.
3. Select Options and one of the following:
–
–
Rename to rename the device.
Delete to remove the device from
your phone if you are no longer going
to use it.
Connecting to a device
To connect your phone to an audio
Bluetooth device:
–
Services to view a description of the
device (such as Headset, Handsfree,
Object Push, and Serial Port).
1. Select Menu > Settings > Bluetooth >
My Devices.
2. At the device list, highlight a device and
Bluetooth settings
select Connect.
You can set how your phone interacts with
Bluetooth devices. Select Menu > Settings >
Bluetooth > Settings and one of the following:
A notification appears confirming the connection.
You can now use the device with your phone.
Disconnecting from a device
To disconnect your phone from an audio
Bluetooth device:
•
•
•
My Name changes the name of your phone for
other devices it is paired with to identify.
Visible Duration sets the time your phone
remains visible to other devices.
Services shows the list of the Bluetooth
wireless technology service protocol
supported by your phone.
1. Select Menu > Settings > Bluetooth >
My Devices.
2. At the device list, highlight a device and
select Disconnect.
•
OBEX Authentication enables or disables
OBEX authentication.
User Guide
39
Ringer mode
Sounds
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages).
Your phone has several settings that control the
sound. You can select from a variety of ringers
and control the volume.
You can silence all sounds and set the phone
to vibrate or light up when you receive calls
and alerts.
Ringers
You can change the ringer for your phone. You
can also assign ringers for different tasks.
Select Menu > Setting > Sounds > Ringer Mode
and one of the following:
Ringer types
•
Normal Sounds rings for the incoming call or
alert (in effect, returning phone to a non-
silent mode).
Your phone has multiple ringers you can choose
to use for all incoming calls, incoming business
calls, and incoming personal calls.
•
•
Vibrate Only vibrates for the duration of the
incoming call or other alerts.
Vibe Then Ring vibrates for the first 10
seconds and then rings for the remainder of
the incoming call alert.
1. Select Menu > Settings > Sounds >
Ringers > Ringer Type, Business Ringer,
or Personal Ringer.
2. Select a ringer. (Scroll down the list to hear
the ringers.)
•
Lights Only lights up for the duration of the
incoming call or other alerts.
Tip: You can use your selected ringer type to
identify callers with your contacts assigned to
different groups. For more information, see
“Contact groups” on page 23.
You can also press and hold the Space # key
(or press up and down the Volume key) to
toggle between Vibrate Only mode and Normal
Sounds mode.
Roam ringer
Your phone can alert you to roaming calls with a
specific ringer. Select Menu > Settings >
Sounds > Ringers > Roam Ringer > Enabled.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Roam ringer activation
Your phone can alert you to roaming calls with
a specific ringer. Select Menu > Settings >
Sounds > Roam Ringer Activation > Enabled.
40
Sounds
Volume
Power on/off
You can control the volume of your
phone’s features.
Your phone plays a sound when powering on and
off. Select Menu > Settings > Sounds >
Pwr On/Off > Enabled.
Volume controls
Key Sound
To choose the sound the phone makes when you
press its keys, select Menu > Settings >
To control the volume of the phone’s ringer,
speakerphone, earpiece, and keypad:
1. Select Menu > Settings > Sounds >
Volume > Ringer Volume,
Sounds > Key Sound > Tone, Click, or Off.
Spkrphone Volume, Earpiece Volume, or
Key Volume.
Display
2. Scroll right to increase the volume or left to
Wallpaper
decrease the volume.
You can select a wallpaper for your phone’s home
screen. Select Menu > Settings > Display >
Wallpaper and one of the following options:
3. Press the OK key to save.
Smart volume
•
•
Scroll to select a wallpaper.
Select Options > View to see the
enlarged picture.
Select Options > Camera Pictures to select a
picture taken with your phone’s camera.
Select Options > Saved Images to select an
image from your images folder.
Select Options > Details to view the
file details.
To automatically adjust the volume during a call,
based on surrounding noise levels,
select Menu > Settings > Sounds > Volume >
Smart Volume > Enabled.
•
•
•
Flip sounds
To assign specific sounds for when your phone’s
flip opens or closes:
1. Select Menu > Settings > Sounds >
Flip Sounds > Flip Open or Flip Closed.
2. Select a sound. (Scroll down the list to hear
the sounds.)
User Guide
41
Screensaver
My banner
Screensavers appear on the home screen,
activated 10 seconds after the last keypress.
Incoming calls and alerts override the
screensavers. Select Menu > Settings >
Display > Screensaver and one of the
following options:
The banner is the personal label for your phone,
which appears on the home screen above the time
and date. To change your banner:
1. Select Menu > Settings > Display >
My Banner.
2. Select Edit and press the Back key to clear
•
•
Scroll to select a screensaver.
Select Options > View to see the
enlarged picture.
the current banner.
3. Enter your new text (no more than 14
characters) or press the Space # key if you
want a blank banner and select Save.
•
•
•
Select Options > Camera Pictures to select a
picture taken with your phone’s camera.
Select Options > Saved Images to select an
image from your images folder.
Select Options > Details to view the
file details.
My ticker
The ticker is the personal label for your phone. To
change your ticker:
1. Select Menu > Settings > Display >
My Ticker.
Main menu view
2. Select Options > Edit and press the Back
To display menus in various formats, select
Menu > Settings > Display > Main Menu View
and one of the following:
key to clear the current ticker.
3. Enter your new text and select Save.
•
Grid displays icons of each menu item, with
its name at the bottom of the screen.
List displays a list of each menu item.
Backlighting
Your screen lights up while you are in a call or
when you press a key on the keypad. The
backlight automatically turns off when the phone
is inactive or when you are in a call to prolong
battery life.
•
The next time you select Menu from the home
screen, you see the menu style you selected.
42
Display
Set backlight duration
Language
To set the length of time that backlighting remains
on, select Menu > Settings > Display >
Backlighting > Duration and one of the
following:
Your phone can display alternative languages.
Select Menu > Settings > Display > Language
and a language.
Time and date format
•
7 seconds, 15 seconds, or 30 seconds
(default) turns backlighting on for a set time
after your last keypress.
Your phone can display different time/date
formats. Select Menu > Settings > Display >
Time/Date Format and a format.
•
7 sec/in call, 15 sec/in call, or 30 sec/in call
turns backlighting on for the duration of a
call, and for a set time after your last keypress.
Convenience
Your phone has several settings that may make
your phone more convenient to use.
Note: The “in call” settings drain the battery
more quickly.
Power save mode
Airplane mode
You can activate the power save mode to dim the
backlight and conserve battery life. The power
save mode sets the backlight of the phone to the
lowest level. Select Menu > Settings > Display >
Backlighting > Pwr Save Mode > On.
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control. In
Airplane mode, however, your phone does not
emit RF signals. You cannot make or receive calls,
send text messages, or use the browser or
Bluetooth devices, but you can play games, use
the Scheduler, set the clock, and make emergency
calls to the designated emergency numbers.
Please check with uniformed personnel before
operating your phone in Airplane mode.
Brightness
To change the brightness of the display:
1. Select Menu > Settings > Display >
Brightness.
2. Scroll to change the brightness.
To set your phone to Airplane mode, select
Menu > Settings > Convenience > Airplane
Mode > Enabled.
3. Press the OK key to save.
If you turn on Airplane mode, you can also set the
time and date manually.
User Guide
43
Enable hold call feature
Auto-hyphen
1. Select Menu > Settings > Convenience >
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan, such as
1-222-333-4444. Select Menu > Settings >
Convenience > Auto-Hyphen > Enabled.
Hold Call > Enabled.
If you have not recorded a hold message, you
need to record one, such as “Please hold. I’ll
answer in a minute.”
2. Record the message twice, as prompted.
1-Touch dialing
3. Select Save to save the message or Options
The 1-Touch Dialing feature is the fastest way
to call a speed dial location. To call a contact
with speed dial, press and hold the speed
dialing location.
and one of the following.
–
–
Play to replay your message.
Re-Record to record your
message again.
Note: If it is a two-digit number, press the first
digit briefly, then press and hold the second digit.
For example, if the speed dialing location is 15,
press 1 briefly, then press and hold 5.
–
Exit to exit.
The next time a call comes in, you can place it
on hold.
To use 1-Touch dialing, you must enable 1-Touch
dialing on your phone and have a speed dial
location assigned to a contact.
Place a call on hold
You can place a call on hold once you have
enabled this feature.
To enable 1-touch dialing,
select Menu > Settings > Convenience >
1-Touch Dialing > Enabled.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. With no call waiting enabled, the call
goes to voicemail.
Hold call
When a call comes in, do the following:
The Hold Call feature enables you to place
incoming calls on hold until you are ready to
answer them.
1. Select Hold Call to place the caller on hold
and play your recorded hold message.
2. Select Answer to speak to the caller on hold
Note: The Hold Call feature does not work with
the Open to Answer feature enabled. See “Open to
answer” on page 45.
or End Call to hang up without speaking.
44
Convenience
To enable Frequent List, select Menu >
Settings > Convenience > Frequent List >
Enabled.
Change the hold message
1. Select Menu > Settings > Convenience >
Hold Call > Re-Record Msg.
2. Record the message twice, as prompted.
Missed call alert
3. Select Save to save the message or Options
Your phone can alert you after you missed a call.
Select Menu > Settings > Convenience >
Missed Call Alert and one of the following:
and one of the following.
–
–
Play to replay your message.
Re-Record to record your
message again.
•
•
Disabled turns off the sound alert.
Vibrate, Beep, Freeway, Game, Bloop,
Winner, or Zilofon sets the phone to alert you
once when a new message is received.
–
Exit to exit.
Fast find
•
Vibrate & Remind, Beep & Remind,
Freeway & Remind, Game & Remind,
Bloop & Remind, Winner & Remind, or
Zilofon & Remind sets the phone to notify
you once when a new message is received and
then notify you again every five minutes. To
stop a reminder alert, select Ignore.
With Fast Find enabled, you can press one or two
keys to view close matches of the number you are
looking for.
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed
dial entry appears.
Minute alert
2. Scroll to your desired contact and press the
Your phone can alert with a short beep ten
seconds before each minute passes during a call.
Select Menu > Settings > Convenience >
Minute Alert > Enabled.
Call key to call the number.
To enable Fast Find, select Menu > Settings >
Convenience > Fast Find > Enabled.
Frequent list
Open to answer
From the home screen, select Contacts. The last
15 of your most frequently called contacts appear
with the Frequent List enabled. Scroll past the
double line to view the entire Contacts list.
This feature enables you to answer a call by
opening the flip. Select Menu > Settings >
Convenience > Open to Answer > Enabled.
User Guide
45
Any key answer
Display results
To set the phone to answer calls when you press
any key, select Menu > Settings >
Convenience > Any Key Answer > Enabled
(to answer calls with any key except the End,
Back, or Navigation key).
The display results enables your phone to show
either one voice recognition candidate or up to
three ones. Select Menu > Settings >
Voice Features > Display Results and one of
the following:
•
Single Best presents you only one voice
recognition result.
Three Best presents you up to three voice
recognition results.
Voice Features
The following features enable you to customize
the voice commands.
•
Automatic add
Digit lengths
By default, your phone automatically enables
voice dialing for each new contact you add to
your Contacts list as long as the contact name
contains at least one alphabet but no more
than five words or components. You can
select Menu > Settings > Voice Features >
Automatic Add > Disabled to disable the
voice dialing for new contacts.
Use the digit lengths to determine whether to limit
your dialed numbers to North American numbers
or any numbers. Select Menu > Settings >
Voice Features > Digit Lengths and one of
the following:
•
North American recognizes only digit strings
of lengths that correspond to valid North
American dialing numbers of 7-digits,
10-digits, or 1+10-digits to improve accuracy.
Voice training
•
Permit All allows any digit strings of 4 to 14
digit lengths.
You can train your phone to recognize specifically
your voice for numbers. Use voice training only
when you find your voice not recognized with
acceptable accuracy.
Voice wake-up
You can activate voice dialing by saying “wake up”
twice. Select Menu > Settings >
Voice Features > Voice Wake-Up >
With Accessory to enable calls with an accessory.
If your phone is having trouble recognizing your
voice, select Menu > Settings >
Voice Features > Voice Training > OK >
Train Numbers. Follow the prompts for each
number until training is complete.
46
Voice Features
To wake up the phone:
Expert mode
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your Wake Up
command, see “Voice training” on page 46.
The expert mode enables you to speak the
command after you hear a tone instead of
speaking a command following the initial voice
prompts. Select Menu > Settings >
Voice Features > Expert Mode and one of
the following:
Voice answer
You can use your voice to answer a call when
using a hands-free accessory.
•
•
Normal sets phone to default voice prompts.
Expert sets phone to sound tones instead of
voice prompts.
Enable voice answer
Select Menu > Settings > Voice Features >
Voice Answer > With Accessory to enable
answering calls with an accessory.
Accessories
This section describes settings that affect
accessories you use with your phone.
Note: To use the voice answer feature, you must
have the Auto-Answer feature disabled (see
“Auto answer” on page 47), the Out of headset
option selected (see “Headset sounds” on
page 47), and the phone set to Normal Sounds
(see “Ringer mode” on page 40).
Headset sounds
With a headset attached to your phone, you
can play the ringer through the headset or
phone speaker.
Select Menu > Settings > Accessories >
Headset Sounds and one of the following.
Use voice answer
When you receive an incoming call, the phone
prompts “Incoming call, answer?”. If the caller is
recognized as a contact entry in your phone, the
phone prompts “Incoming call from (Name),
answer?”. Say “Yes” to answer or “No” to silence
the alert without answering.
•
•
Out of phone rings from the phone speaker.
Out of headset rings from the headset.
Auto answer
With a headset or hands-free kit attached to
your phone, you can set the phone to
answer automatically.
Select Menu > Settings > Accessories >
Auto-Answer > After 5 Seconds. The phone
automatically answers after 5 seconds.
User Guide
47
TTY device
Voice privacy
You can connect the phone to a teletype (TTY)
device for the hearing impaired.
You can also set your phone to use enhanced
digital CDMA privacy. Select Menu > Settings >
Network > Voice Privacy > Enhanced.
Note: Enable TTY only when using the phone with
a TTY device.
Roaming service alert
1. Connect the TTY device to the phone.
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
2. Enter ##889 with your keypad and select
TTY or select Menu > Settings >
Accessories > TTY Device.
Select Menu > Settings > Network >
Roam/Svc Alert and one of the following:
3. At the notification, select OK.
4. Select TTY On to connect or TTY Off to
•
•
Disabled turns roaming service alert off.
When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
not connect.
Hearing aid
Enable your phone to operate with a T-coil
Hearing Aid device. Select Menu > Settings >
Accessories > Hearing Aid > OK > Enabled.
•
•
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Note: Enable Hearing Aid only when using your
phone with a T-coil Hearing Aid device.
Network
Privacy Alert
You can set your phone to alert you when
enhanced digital CDMA privacy is lost or
regained. Select Menu > Settings > Network >
Privacy Alert > Enabled.
Roam option
You can restrict your phone from making a call
when roaming. Select Menu > Settings >
Network > Roam Option > Automatic (allows
roaming) or No Roaming (disallows roaming).
48
Network
•
Location On shares your position
information, in addition to
emergency services.
Set phone line
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number. Select Menu >
Settings > Network > Set Phone Line and one
of the two lines.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, still takes messages. All contacts and
settings are shared for both lines.
Web alert
You can set an alert to confirm the start or exit of
the browser. Select Menu > Settings >
Network > Web Alert and one of the following:
•
•
•
At Start prompts you when you start a session.
At End prompts you when you end a session.
Both prompts you when you start or end
a session.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection.
•
No Prompts sets no prompts.
Roam call alert
You can set the phone to warn you before you
answer or place a call while roaming.
Select Menu > Settings > Network >
Roam Call Alert > Call Prompt.
Location
This setting enables you to share your location
information with network services other than
emergency services (for example, 911, 111, 999
and 000) in areas where service has been
implemented.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept or
place a call while roaming, you must press 1.
This feature works only when your phone is in
digital mode. You do have the option of turning off
the locator to emergency services.
Note: Call Prompt is disabled when the phone is
in Emergency Mode.
Security
Select Menu > Settings > Network > Location
and one of the following.
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
•
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency code.
User Guide
49
Lock phone
Emergency numbers
When your phone is locked, you can call only
emergency numbers or your service provider’s
customer service number. You can still receive
incoming calls.
The emergency numbers feature enables you to
specify three personal phone numbers you can
call when the phone is locked.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Emergency Numbers.
4. Select an Unassigned slot.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Lock Phone > OK and one of the
following:
5. Enter the number and select Done.
–
–
Never leaves the phone always unlocked.
On power up locks the phone every time
you turn it on.
You can view these numbers only when entering
them for the first time.
To make a call to an emergency number from a
locked phone, you must dial the number
(including area code) exactly as it was stored in
Emergency Numbers.
–
Now locks the phone immediately.
Do the following to unlock the phone:
1. From the home screen, select Unlock.
2. Enter your four-digit lock code.
Erase contacts
Limit calls
You can erase all entries from your Contacts list.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
You can limit the calls that can be made from
your phone to emergency numbers, your
contacts, and your service provider’s numbers.
3. Select Erase Contacts and one of the
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
following:
–
–
No exits without erasing contacts.
Yes erases all contacts. A confirmation
prompt appears to verify your decision.
3. Select Limit Calls and one of the following:
–
–
No Limit: does not limit calls.
Limit Outgoing limits outgoing calls
while incoming calls still work.
Limit All limits both incoming and
outgoing calls.
4. Select Yes to confirm.
–
50
Security
New lock code
The lock code is typically 0000 or the last 4 digits
of your phone number. To change your lock code
from the default provided by the service provider:
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Lock Code.
4. At the confirmation, select Yes.
5. Enter a new four-digit code.
6. Re-enter your new lock code.
Phone information
You can access information regarding your
phone. Select Menu > Settings > Phone Info
and one of the following:
•
Build Info shows specific software and
hardware information.
•
Icon Key shows the icons used by
your phone.
User Guide
51
11 MEDIA GALLERY
Your phone stores images and sounds, and
displays those files on the phone’s screen.
2. Depending on your selection, you can
select View or Options to complete your
desired task.
Accessing folders
To access the folders where your phone stores
media files, select Menu > Media Gallery and
one of the following:
Browsing tones
To browse the Tones folder:
1. Select Menu > Media Gallery > Tones and
•
Images contains image files that are
preloaded, downloaded, saved or created.
Tones contains sound files that are
one of the following:
–
Saved Sounds displays the
sounds available.
•
preloaded, downloaded, saved or created.
–
–
Ringers displays the ringers available.
Voice Memos contains the voice memos
you have made.
Browsing images
To browse the Images folder:
2. At the folder list, highlight a file.
1. Select Menu > Media Gallery > Images and
3. Depending on your selection, you can select
Send, Assign, Play, or Options to complete
your desired task.
one of the following:
–
–
–
–
–
Camera Images displays the images
captured with your phone camera.
Saved Images displays the
images available.
Wallpapers displays the
wallpapers available.
Screensavers displays the screen
savers available.
Caller IDs displays the pictures you can
assign as caller IDs.
52
Accessing folders
12 CAMERA
The following are some tips for you to operate
your phone’s camera:
Note: The picture is saved to your Camera
Pictures folder.
•
You cannot activate the camera while on
an active call or while browsing files in the
media gallery.
4. Select Send to create a multimedia
message or Erase to delete the picture
from your phone.
•
•
•
Once the camera is active, the external or
home screen acts as the viewfinder.
If you get a “Low memory” error, check your
resolution and quality compression settings.
If there is no activity within 45 seconds after
you turn on your camera, the camera quits
and returns to the previous launch point.
You can only access menu settings and
options when the camera is active.
5. Press the End key to exit camera mode.
Camera mode options
You can set up how your camera takes pictures.
While in camera mode, select Options and one of
the following:
•
Settings displays the following camera
settings you may set up prior to taking
a picture:
•
–
Resolution sets the horizontal and vertical
number of pixels for the picture.
Taking a picture
To take a picture:
1. Activate the camera in one of the
following ways:
–
Self Timer sets up a countdown timer to
automatically take a picture when the
timer expires. When set, the camera beeps
from 3 seconds down to the time the
shutter automatically snaps the picture
(unavailable for Multishot mode).
Date/Time prints the date and time on the
picture (not for 160x120 resolution).
Multishot takes up to six multiple pictures
with the Camera key pressed and held.
A tone plays each time a picture is taken.
A second tone plays when the final picture
is taken.
–
Press and hold the Camera key until the
camera screen appears.
–
Select Menu > Camera.
–
–
2. Focus on the image using the phone’s display
as a viewfinder.
3. Take a picture in one of the following ways:
–
–
Press the OK key.
Select Capture.
User Guide
53
–
–
–
–
Shutter Sound sets the sound used when
the camera takes a picture.
White Balance adjusts the camera for
different lighting.
Color Tone sets the color tone of
the picture.
Picture Quality sets the picture
compression. When set to High, the
picture is saved with less compression and
higher quality at the expense of using up
more memory space.
Camera indicators and icons
The camera may display the following on screen
indicators and icons.
Note: Numbers in the top right corner indicate
the number of snapshots remaining. Numbers in
the bottom left corner indicate the resolution
setting for pictures.
Camera is in camera mode.
Multishot feature is on.
Self-timer feature is on
•
•
•
•
Brightness adjusts the brightness of the image
in the home screen LCD.
Camera Images displays all pictures taken
with your phone’s camera.
Last Picture displays the most recently
taken picture.
Camera zoom mode is ready.
Frames adds a frame or a stamp to your
picture. A frame or stamp cannot be removed
once it has been used in a picture. The picture
resolution changes to 160x120 while taking
pictures with Frames enabled. The
resolution returns to the original setting
with Frames disabled.
Note: The following settings revert to the default
setting each time you enter and exit the camera
application: Self Timer and MultiShot.
54
Camera indicators and icons
13 TOOLS & GAMES
Your phone comes with tools and games. Some of
the games or tools described here may not be
available on your phone.
Voice memo
The Voice Memo tool enables you to record and
play back audio memos.
If you receive an incoming call while you are
playing a game, the game is paused and exited.
You can return to play once the call alert ends.
Games do not remain paused if the phone is
turned off or loses power.
Record voice memos
To record new voice memos, do the following:
1. Select Menu > Tools & Games >
Voice Memo > Record New.
2. Say your voice memo. Select Stop when you
Brick attack
are done.
The goal of this game is to eliminate
bricks arranged in levels. You send a moving
ball upward using a paddle at the bottom of
the screen.
3. Select Save to save your memo.
If an incoming call is received while you are
recording a memo, the memo is saved and the
incoming call screen appears.
1. Select Menu > Tools & Games >
Brick Attack.
Review voice memos
To play and use voice memos, do the following:
2. At the notification, select Yes or No.
3. Select New to start the game. You have the
1. Select Menu > Tools & Games >
following options:
Voice Memo > Recorded Memos.
–
Use the Navigation key to move
the paddle.
2. At the file list, highlight a file.
3. Select Play to play the memo or select
–
–
–
Press the Back key to pause the game.
Select Resume to restart the game.
Select Options > Exit to exit the game.
Options and one of the following:
–
Send creates a message with the
memo attached.
–
–
Erase deletes the memo.
Lock / Unlock prevents erasing the
memo accidentally.
–
Rename renames the memo.
User Guide
55
–
–
Details displays the details of the file.
Erase All deletes all memos stored.
6. At the Duration field, modify the duration
of event, if needed. Press OK to change
the duration.
–
Scroll left or right to move between the
hour and minute fields.
Scroll up or down to change the hour
and minute.
Scheduler
The Scheduler enables you to schedule events and
set reminder alerts.
–
Create an event
1. Select Menu > Tools & Games >
Press the OK key to save the duration and
move to the next field.
Scheduler > Add New Event.
7. At the Priority field, choose a priority. Press
2. At the Event Name field, enter a name. Scroll
the OK key and select a choice from the list.
down to move to the next field when done.
8. At the Reminder field, choose a reminder.
Press the OK key and select a choice from
the list.
3. At the Type field, choose an event. Press the
OK key and select a choice from the list.
4. At the Date field, modify the date, if needed.
9. At the Reminder Sound field, choose a
reminder sound alerts. Press the OK key and
select a choice from the list.
Press OK to change the date.
–
–
Scroll left or right to move between the
month, day and year fields.
Scroll up or down to change the month,
day and year.
10. At the Silent Mode field, press the OK key
and select off to leave on normal sounds or
During Event to place the phone in silent
mode during the duration of the event.
Press the OK key to save the date and move
to the next field.
11. At the Recurring Event field, make the event
recurring, if needed. Press the OK key and
select a choice from the list.
5. At the Time field, modify the time, if needed.
Press OK to change the time.
–
–
Scroll left or right to move between the
hour, minute and AM/PM fields.
Scroll up or down to change hour,
minute and AM/PM.
12. Select Save to save the event.
View events
You can view the events saved to the scheduler.
Press the OK key to save the time and move
to the next field.
56
Scheduler
2. At the event list, select one of the following:
View by date
–
–
–
–
–
Scroll to an event and select View to
display the event detail.
Select Options > Sort by Time to sort
events by time.
Select Options > Sort by Type to sort
events by type.
Select Options > Sort by Priority to sort
events by priority.
1. Select Menu > Tools & Games > Scheduler
and one of the following:
–
View Month displays the current month.
Days with events are highlighted. Scroll
the calendar. Press the OK key to select
a date.
–
–
View Day displays the current date.
Scroll right or left to move to
another date.
Go to Date chooses a specific date.
Scroll left or right to move between the
month, day and year fields. Scroll up or
down to change month, day and year.
Press OK to select the date.
Select Options > Erase All Events to
delete all events.
Modify an event
You can modify existing events.
From the event detail screen, you can select OK to
return to the previous screen or Options and one
the following:
2. At the day view, do one of the following:
–
–
–
–
–
Select an existing event to view the
event detail.
Scroll to a time and select Add New to
create a new event.
Select Options > Go to Today to return
to the current date.
Select Options > Go to Date to select a
specific date.
•
•
•
•
Edit edits the event.
Erase deletes the event.
Send creates a message containing the event.
Copy creates an event with the existing event
information.
Select Options > Erase all Events to
delete all event for that date.
View by list
1. Select Menu > Tools & Games >
Scheduler > View All Events.
User Guide
57
Press the OK key to save the time and move
to the next field.
Scheduler settings
You can change the default settings of
your scheduler.
4. At the Alarm Sound field, choose a sound.
Press the OK key and select a choice from
the list.
Select Menu > Tools & Games > Scheduler >
Settings and one the following:
5. At the Recurring field, make the alarm
recurring, if needed. Press the OK key and
select a choice from the list.
•
•
•
•
•
Scheduler Hours changes the work day.
Auto Delete deletes events automatically.
Priority prioritizes new events.
Reminder assigns reminders for new events.
Reminder Sound assigns sound alerts for
new event reminders.
6. At the Alarm Note field, enter a note. Press
the OK key.
7. Select Save to set the alarm(s).
When the alarm rings, select Off to turn off
the alarm or Snooze to silence the alarm for
10 minutes.
•
Silent Mode sets the phone to silent mode for
new events.
Alarm clock
Tip: Opening the flip turns off the alarm.
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
Set the quick alarm
1. Select Menu > Tools & Games >
Note: The alert occurs only if the phone is on.
Alarm Clock.
Set the alarm clocks
2. Highlight the quick alarm and select Set.
1. Select Menu > Tools & Games >
3. At the Time field, select a time option. A
Alarm Clock.
notification shows the quick alarm is on.
2. Scroll to one of the alarms and select Set.
When the quick alarm rings, select Off to turn off
the alarm or Reset to set the quick alarm again.
3. At the Alarm Time field, modify the time, if
needed. Press OK to change the time.
Tip calculator
–
Scroll left or right to move between the
hour, minute and AM/PM fields.
Scroll up or down to change the hour,
minute and AM/PM.
The Tip Calculator helps you calculate how much
tip to include with a bill.
–
1. Select Menu > Tools & Games >
Tip Calculator.
58
Alarm clock
2. Enter the amount of your bill and
–
–
MR displays currently stored value on
the screen.
MC clears value currently stored
in memory.
select Next.
3. Select the percentage amount to tip. The new
bill amount is shown.
4. Select Done to return to menu or Split to
split the bill. To split the bill enter number
of guests and select Next. The new bill
amount with splits is shown. Select Done
to return to menu.
Timer
The Timer counts down for the specified time,
and beeps when that amount of time has elapsed.
1. Select Menu > Tools & Games >
Timer > Set.
Calculator
2. At the Set Timer, enter the time length.
The Calculator can perform basic
mathematical operations.
–
Scroll left or right to move between the
hours, minutes and seconds fields.
Scroll up or down to change the hours,
minutes and seconds.
–
1. Select Menu > Tools & Games >
Calculator.
3. If needed, select Sound and one of the
2. Enter the first number.
sounds to change the sound.
3. Select mathematical operation.
4. To work the timer, select the
–
–
–
–
Scroll left to multiply.
Scroll right to divide.
Scroll up to add.
following options:
–
–
–
Start begins the countdown.
Stop pauses the countdown.
Reset clears the timer.
Scroll down to subtract.
The chosen operation is highlighted.
When the countdown is complete, select Off to
silence the alarm.
4. Enter the second number. Press the OK
key to perform the operation. The result
is shown.
Stopwatch
The Stopwatch counts time for you.
5. Select Exit to return to menu or Options
and one of the following:
1. Select Menu > Tools & Games >
–
M+ adds displayed result to the value
Stopwatch.
stored in memory.
User Guide
59
2. To work the stopwatch, select the
following options:
–
–
–
Start begins counting.
Stop pauses counting.
Reset clears the stopwatch.
Press the Back key to return to the menu.
World clock
The world clock enables you to check times
in cities around the world in relation to your
local time.
Set the world clock
1. Select Menu > Tools & Games >
World Clock.
The world clock menu displays your local
date and time on the first line.
2. Scroll left or right to select a different time
zone, or up and down to view other cities on
the same time zone.
Search the world clock
From the world clock menu, you can search by
city or country.
1. Select Menu > Tools & Games >
World Clock > Options > Search City or
Search Country.
2. Enter the first letter(s) of your desired city
or country.
3. Select the city or country from the list.
60
World clock
14 VOICE COMMANDS
You can call a contact, dial a phone number,
access menus, or find contact information from
your voice dial list using voice commands.
2. At the contacts list, highlight a check marked
contact and press the OK key. No check
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
want to remove from voice dialing.
Note: You cannot use voice recognition to end
a call; you must press the End key when the flip
is open.
3. Select Save.
Voice dial list
Voice commands
To call or find a contact using voice dial, you must
add the contact to your voice dial list. The contact
name must not have more than five words or
components for voice recognition.
Start voice commands
1. Press and hold the Send key to initiate voice
commands. The phone prompts,
“Say a command”.
Add contacts
2. Say one of the following commands and
To add a contact to your voice dial list:
follow the voice prompts.
–
–
–
–
“Contact <name>” calls a contact on
your voice dial list.
“Dial Number <#>” calls by speaking
the digits of the phone number.
“<shortcut name>” sends you to a
menu item.
1. Select Menu > Contacts > Voice Dial List.
2. At the contacts list, highlight a contact and
press the OK key. A check mark appears
next to a name when voice dialing is
active. Check each name you want to use
with voice dialing.
“Find Contact” allows you to find a
contact from your voice dial list.
3. Select Save.
Remove contacts
To add a contact to your voice dial list:
Call a contact name
1. If you haven’t already done so, add the
person you want to call to the Voice Dial List.
See “Voice dial list” on page 61.
1. Select Menu > Contacts > Voice Dial List.
User Guide
61
2. From the home screen, press and hold
the Send key. The phone prompts,
“Say a command”.
Use shortcuts
1. From the home screen, press and hold the
Send key. The phone prompts,
“Say a command”.
3. Say “Contact” and the name of the person
you want to call.
2. Say the name of the menu item you want to
access or say “Shortcut” to view a list of
menu items. The phone prompts,
The phone prompts, “Please repeat” or “Say
a name” if it does not recognize the name. If
the name you spoke matches a contact in the
Voice Dial List, the phone prompts: “Name,
correct?” Say “Yes” to make the call, “No” to
select a similar name, or “Cancel” to cancel
the phone call.
“Say one of the shortcuts”.
3. Say the name of the menu item you want
to access.
Find contacts
If the phone finds multiple voice tags that
sound like the name you said, the phone
lists the names and asks you to verify which
name to call. Say “Yes” when you hear the
correct name or “No” when you hear an
incorrect one.
You can use voice commands to find contact
information for contacts in your Voice Dial List.
1. From the home screen, press and hold the
Send key. The phone prompts,
“Say a command”.
2. Say “Find contact”. The phone prompts,
4. Press the End key to end the call.
“Say a name”.
The phone prompts, “Please repeat” or
“Say a name” if it does not recognize the
name. If the name you spoke matches a
contact in the Voice Dial List, the phone
prompts: “Name, correct?” Say “Yes” to
display the contact, “No” to select a similar
name, or “Cancel” to cancel the search.
Call a number
1. From the home screen, press and hold the
Send key. The phone prompts,
“Say a command”.
2. Say “Dial number” and then speak the digits
of the number you want to call. If you pause,
the phone prompts you, “Did you say
<number>” or “Say a number” if it does not
recognize the name. Say “Yes” to make the
call or “No” to cancel the phone call.
3. Press the End key to end the call.
62
Voice commands
15 GETTING HELP
Customer support
•
Customer support phone numbers are also
available in the following countries:
Your service provider’s customer support
department may be accessible directly from your
phone when you dial a number, such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available
to you, such as call forwarding or voicemail.
Argentina:
Australia:
Brazil:
0-800-666-0052
1-800-507-000
0-800-55-2362
800-43-1212
Chile:
For questions about the phone features, refer to
the materials provided with your phone, or visit
Colombia:
India:
01-800-700-1546
Toll free#: 1-600-121214
Toll#: 0124-284-5000
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
Mexico:
001-866-650-5103
New Zealand: 0-800-990-100
•
•
•
Email: [email protected].
Phone: 1-800-349-4478 (U.S. and Canada) or
1-858-882-1401.
Panama:
001-800-51-934
1-866-664-6443
0-800-100-2640
Puerto Rico:
Venezuela
User Guide
63
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
Become a product evaluator
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including
cellular or PCS phones,
•
•
The name of your service provider.
The actual error message or problem you
are experiencing.
visit beta.kyocera-wireless.com.
•
•
The steps you took to reproduce the problem.
The phone’s mobile equipment
identifier (MEID).
Note: To locate the MEID, select Menu >
Settings > Phone Info > Build Info and scroll
down to MEID: for the 14-digit number. If your
phone uses an electronic service number (ESN),
ESN replaces MEID.
Qualified service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
Phone accessories
To shop for phone accessories, visit
www.kyocera-wireless.com/store. You may also
call us at 800-349-4188 (U.S.A. only) or
858-882-1410.
64
Qualified service
16 CONSUMER LIMITED WARRANTY
Kyocera Wireless Corp. (“KYOCERA”) offers you a
limited warranty that the enclosed product or
products (the “Product”) will be free from
defects in material and workmanship for a period
that expires one year from the date of sale of the
Product to you, provided that you are the original
end-user purchaser of the Product and provided
that your purchase was made from an authorized
supplier. Transfer or resale of a Product will
automatically terminate warranty coverage with
respect to that Product. This limited warranty is
not transferable to any third party, including but
not limited to any subsequent purchaser or owner
of the Product.
After the one year warranty period, you must pay
all shipping, parts and labor charges.
This limited warranty does not cover and is void
with respect to the following: (i) any Product
which has been improperly installed, repaired,
maintained or modified; (ii) any Product which
has been subjected to misuse (including any
Product used in conjunction with hardware
electrically or mechanically incompatible or used
with accessories not approved by KYOCERA),
abuse, accident, physical damage, abnormal
operation, improper handling, neglect, exposure
to fire, water or excessive moisture or dampness
or extreme changes in climate or temperature;
(iii) any Product operated outside published
maximum ratings; (iv) cosmetic damage; (v) any
Product on which warranty stickers or Product
serial numbers have been removed, altered, or
rendered illegible; (vi) cost of installation,
removal or reinstallation; (vii) signal reception
problems (unless caused by defects in material
and workmanship); (viii) damage the result of
fire, flood, acts of God or other acts which are not
the fault of KYOCERA and which the Product is not
specified to tolerate, including damage caused by
mishandling, shipping and blown fuses; (ix)
consumables (such as fuses); or (x) any Product
which has been opened, repaired, modified or
altered by anyone other than KYOCERA or a
KYOCERA authorized service center.
KYOCERA shall, at its sole and absolute discretion,
either repair or replace a Product (which unit
may use refurbished parts of similar quality and
functionality) if found by KYOCERA to be defective
in material or workmanship, or if KYOCERA
determines that it is unable to repair or replace
such Product, KYOCERA shall refund the purchase
price for such Product, provided that the subject
Product (i) is returned, with transportation
prepaid, to a KYOCERA authorized service center
within the one year warranty period, and (ii) is
accompanied by a proof of purchase in the form
of a bill of sale or receipted invoice which
evidences that the subject Product is within the
one year warranty period (“Proof of Purchase”).
User Guide
65
USE ONLY KYOCERA APPROVED ACCESSORIES
WITH KYOCERA PHONES. USE OF ANY
UNAUTHORIZED ACCESSORIES MAY BE
DANGEROUS AND WILL INVALIDATE THE PHONE
WARRANTY IF SAID ACCESSORIES CAUSE
DAMAGE OR A DEFECT TO THE PHONE.
STATUTORY OR OTHERWISE, WITH RESPECT TO
THE PRODUCTS, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR AGAINST
INFRINGEMENT OR ANY IMPLIED WARRANTY OR
CONDITION ARISING OUT OF TRADE USAGE OR
OUT OF A COURSE OF DEALING OR COURSE OF
PERFORMANCE. NO DEALER, DISTRIBUTOR,
AGENT OR EMPLOYEE IS AUTHORIZED TO
MAKE ANY MODIFICATION OR ADDITION TO
THIS WARRANTY.
KYOCERA SPECIFICALLY DISCLAIMS LIABILITY
FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL,
GENERAL, PUNITIVE, EXEMPLARY, AGGRAVATED,
INCIDENTAL OR CONSEQUENTIAL DAMAGES,
EVEN IF ADVISED OF THE POSSIBILITY THEREOF,
WHETHER FORESEEABLE OR UNFORESEEABLE
OF ANY KIND WHATSOEVER, INCLUDING BUT
NOT LIMITED TO LOSS OF PROFITS,
UNANTICIPATED BENEFITS OR REVENUE,
ANTICIPATED PROFITS ARISING OUT OF USE OF
OR INABILITY TO USE ANY PRODUCT (FOR
EXAMPLE, WASTED AIRTIME CHARGES DUE TO
THE MALFUNCTION OF A PRODUCT) OR
Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages,
or allow limitations on how long an implied
warranty lasts, so the above limitations or
exclusions may not apply to you. This limited
warranty gives you specific legal rights, and you
may also have other rights which vary from
jurisdiction to jurisdiction.
CONTRIBUTION OR INDEMNITY IN RESPECT OF
ANY CLAIM RELATED TO A PRODUCT.
For warranty service information, please call the
following telephone number from anywhere in the
continental United States and Canada:
REPAIR OR REPLACEMENT OF A DEFECTIVE
PRODUCT OR REFUND OF THE PURCHASE PRICE
RELATING TO A DEFECTIVE PRODUCT, AS
PROVIDED UNDER THIS WARRANTY, ARE YOUR
SOLE AND EXCLUSIVE REMEDIES FOR BREACH
OF THE LIMITED WARRANTY, AND SUBJECT TO
THIS WARRANTY, THE PRODUCTS ARE
1-800-349-4478 or 858-882-1401.
Please call or write for the location of the
Kyocera Wireless Corp. authorized service
center nearest you and for procedures for
obtaining warranty service.
APPROVED AND ACCEPTED BY YOU “AS IS”.
KYOCERA MAKES NO OTHER WARRANTIES,
REPRESENTATIONS OR CONDITIONS OF ANY
KIND, ORAL OR VERBAL, EXPRESS OR IMPLIED,
66
Become a product evaluator
INDEX
Symbols
@metro, 34
call lists
erasing, 17
Auto view, 32
auto-erase, 32
viewing, 16
call timers, 17
callback number, 32
text message, 26
callers IDs, 52
calls
auto-hyphenation, 44
automatic add, 46
Numerics
1-touch dialing, 44
B
A
backlighting
settings, 42
accessories, 64
headsets, 47
settings, 47
T-coil hearing aid, 48
TTY device, 48
adding
contacts, 18
extensions, 19
voice dial list, 61
airplane mode, 43
alarm clock, 58
alert
banner, 42
battery
call lists, 16
emergency, 12
ending, 9
caring, 2
charging, 1
holding, 44
installing, 1
limiting, 50
recharging, 1
Bluetooth, 38
connecting to other devices,
39
roaming, 11
silencing, 10
voice commands, 61
camera, 53
pairing, 38
settings, 39
color tone, 54
indicators and icons, 54
multiple pictures, 53
options, 53
privacy, 48
alerts
turning on, 38
bookmarks, 35
Brick Attack, 55
brightness, 43, 54
browser, 35
alerts, 36, 49
launching, 35
options, 35
searching, 35
build information
software, 51
business ringers, 40
browser, 36, 49
messages, 31
resolution, 53
minute, 45
self timer, 53
missed call, 45
pages, 31
settings, 53
shutter sound, 54
taking picture, 53
white balance, 54
capitalization, 14
changing modes, text entry, 14
color tone, 54
contacts, 18
roaming calls, 49
roaming service, 48
vibrating, 40
voicemail, 31
appended messages, 30
auto receive mode
multimedia message, 28
auto retrieve, 32
auto save, 32
C
adding, 18
adding to a group, 20
assign number type, 22
calculator, 59
calendar, See scheduler
User Guide
67
dialing
1-touch, 44
speed, 10
voice list, 61
digit lengths, 46
directory, contacts, 18
display
assign picture, 19, 22
assign ringer, 19, 22
calling numbers, 20
customizing, 19
directory, 18
multimedia messages, 29
evaluation, product, 64
expert mode, 47
F
flip
editing, 18, 19
answering calls, 45
email addresses, 20
erase, 19
erasing, 20, 50
fast find, 45
frequent list, 45
groups, 23
memory, 24
notes, 21
primary number, 20
searching, 23
secret, 20, 21
send as vCard, 19, 22
sending as a vCard, 18
sending text message, 20
speed dial list, 20
street addresses, 21
viewing all, 18
folders
backlighting, 42
banner, 42
brightness, 43
language, 43
draft, 30
images, 52
inbox, 26
multimedia, 52
sent, 30
main menu, 42
screensavers, 42
settings, 41
frame, 54
frequent list, 45
ticker, 42
G
time/date format, 43
display results, 46
downloading
games, 55
Brick Attack, 55
downloading, 34
groups, 23
applications, 34
games, 34
drafts folder, 30
assign picture, 23
assign ringer, 23
creating, 23
E
earpiece, 9
volume, 41
editing contacts, 19
email addresses, 20
email messages, 29
emergency
calls, 12
erase, 23
voice search, 62
web addresses, 21
sending mulitmedia message,
18, 20, 21, 23
sending text message, 23
contacts list, 18
convenience settings, 43
convention
H
hands-free
using this guide, 7
countdown timer, 59
creating
groups, 23
customer support, 63
customizing contacts, 19
auto answer, 47
headsets
auto answer, 47
sounds, 47
help, getting, 63
hold calls, 44
numbers, 50
entering
letters, 13
numbers, 13
symbols, 14
text, 15
D
erasing
default text mode, changing, 32
contacts, 50
68
I
main view, 42
settings, 37
viewing options, 28
multimedia messages
auto save, 32
icons, 5, 51
text message, 26
messages
IM, 29
images
alerts, 31
appended, 30
auto-erase incoming, 32
callback number, 32
completing, 30
default text mode, 32
incoming calls, 30
multimedia message, 26
quicktext, 31
settings, 31
signature, 31
CC/BCC fields, 32
reply to setting, 33
multiple, 53
browsing, 52
saved, 52
multishot, 53
incoming calls, 16
indicators and icons
camera, 54
instant messages, 29
Internet, 35
N
navigation key, 7
network
location information, 49
network settings, 48
notes, contacts, 21
notifications
K
key
text messages, 25
unable to send, 30
navigation, 7
text messages, 26
keypad
O
minute alerts, 45
missed call
alert, 45
missed calls, 16
deal with, 16
modes
airplane, 43
ringers, 40
text entry, 13
multimedia, 52
multimedia message
sounds, 41
volume, 41
keys
open to answer, 45
Outbox, 31
outgoing calls, 16
frequently used, 4
P
L
pages alerts, 31
pairing, 38
personal ringers, 40
phone
language, 43
left softkey, 7
lights only alerts, 40
limiting calls, 50
location information, 49
lock code, 51
lock message
multimedia message, 28
locking
answering calls, 9
codes, 19
extensions, 19
icons, 5
making calls, 8
overview, 3
auto receive mode, 28
creating, 26
forwarding, 28
locking, 28
phone, 50
text messages, 26
options, 27
turning on and off, 8
phone information, 51
phone line
setting, 49
picture
prompt mode, 28
retrieving, 28
saving picture, 29
sent, 30
M
main menu, 6, 42
menus
main, 6
multiple, 53
viewing, 28
User Guide
69
roaming
saving, 29
scheduler, 58
security, 49
call alerts, 49
restrict, 48
service alerts, 48
picture messages
request receipt, 33
sounds, 40
power
world clock, 60
shutter sound, 54
signature, 31
smart sound, 41
software
on and off sounds, 41
S
prepend, 20
scheduler, 56
creating events, 56
modifying events, 57
settings, 58
viewing events, 56
screensavers, 42, 52
searching
contacts list, 23
fast find, 45
voice commands, 62
world clock, 60
security
primary number, 20
priority
text message, 25
privacy alert, 48
prompt mode
build information, 51
sounds
browsing, 52
flip closed, 41
flip open, 41
keypad, 41
multimedia message, 28
Q
quick alarm, 58
quicktext, 31
ringers, 40
saved, 52
R
settings, 40
rapid entry, 14
receipt request
picture messages, 33
text messages, 33
recent calls, 16
redialing, 8
silence all, 40
volume, 41
emergency numbers, 50
erasing contacts, 50
limiting calls, 50
lock code, 51
locking phone, 50
settings, 49
speakerphone, 9, 10
volume, 41
speed
dialing, 10
stopwatch, 59
strap, 4
replying
send IM, 29
multimedia messages, 33
text messages, 26
resolution, 53
restrict roaming, 48
right softkey, 7
ringers, 40, 52
business, 40
mode, 40
sent folder, 30
support, customer, 63
symbols, 14
settings
accessories, 47
alarm clock, 58
Bluetooth, 39
T
T-coil hearing aid, 48
teletype, 48
convenience, 43
display, 41
text entry, 13
capitalization, 14
changing modes, 14
current mode, 13
default mode, 32
letters, 13
menu, 37
personal, 40
roam, 40
silent mode, 40
type, 40
volume, 41
messages, 31
network, 48
phone information, 51
quick alarm, 58
70
V
numbers, 13
speakerphone, 41
validity period
quick reference, 15
rapid entry, 14
W
text message, 26
wallpaper, 41
wallpapers, 52
web
vibrating call alerts, 40
viewing contacts, 18
voice
text messages
creating, 25
erasing, 29
forwarding, 26
icon, 26
locking, 26
notification, 26
options, 25
quicktext, 25
replying, 26
request receipt, 25, 33
retrieving, 26
saving, 25, 26
send later, 26
sender information, 26
set priority, 25
validity period, 26
viewing, 26
addresses, 21
alerts, 49
browser, 35
dial list, 61
memos, 52
privacy, 48
white balance, 54
world clock, 60
searching, 60
wrist strap, 4
voice answer, 47
voice commands, 46, 61
calling contacts, 61
calling numbers, 62
find contacts, 62
shortcuts, 62
voice dial list, 61
voice dialing
adding contacts, 61
removing contacts, 61
voice memos, 55
erasing, 55
locking, 55
playing, 55
recording, 55
sending, 55
ticker, 42
time calls, 45
timer, 59
tip calculator, 58
tools, 55
voice recognition, 61
voice training, 46
voice wake-up, 46
voicemail, 11
alarm clock, 58
calculator, 59
scheduler, 56
stopwatch, 59
timer, 59
alerts, 31
number, 33
volume, 41
tip calculator, 58
voice memo, 55
world clock, 60
turning on and off, 8
adjusting, 10
earpiece, 41
keypad, 41
ringers, 41
smart sound, 41
User Guide
71
|