using standard operating positions specified by the
FCC with the phone transm itting at its highest
certified power level in all tested frequency bands.
Although the SAR is determ ined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
m axim um value. This is because the phone is
designed to operate at m ultiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a wireless base station
antenna, the lower the power output.
FCC/IC Notice
This device com plies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device m ay not cause harm ful interference,
and (2) this device m ust accept any interference
received, including interference that m ay cause
undesired operation.
To com ply with FCC radiation exposure requirem ents,
use of this device for body-worn operational
configurations is lim ited to accessories tested and
approved by Kyocera Wireless Corp. Other
Before a phone m odel is available for sale to the
public, it m ust be tested and certified to the FCC that it
does not exceed the lim it established by the
governm ent-adopted requirem ent for safe exposure.
The tests are perform ed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each m odel. The highest SAR value for
this m odel phone when tested for use at the ear is
1.31 W/kg. and when worn on the body, as described
in this user guide, is 0.648 W/kg. (Body-worn
m easurem ents differ am ong phone m odels,
depending upon available accessories and FCC
requirem ents). While there m ay be differences
between the SAR levels of various phones and at
various positions, they all m eet the governm ent
requirem ent for safe exposure.
The body-worn m easurem ents were perform ed on
the following Kyocera accessories:
Holster CV90-B1680
Leather Case CA90-B1691M
Leather Case CA90-B1691S
SAR testing was perform ed with production battery
CV90-G8196, Model # TXBAT10003.
accessories used with this device for body-worn
operations m ust not contain any m etallic com ponents
and m ust provide at least 13.5 m m separation
distance including the antenna and the user’s body.
Other accessories that have not been tested for body-
worn SAR m ay not com ply with FCC radiation
exposure lim its and should be avoided.
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transm itter and
receiver. It is designed and m anufactured not to
exceed the em ission lim its for exposure to
radiofrequency (RF) energy set by the Federal
Com m unications Com m ission of the U.S.
Governm ent. These lim its are part of com prehensive
guidelines and establish perm itted levels of RF
energy for the general population. The guidelines are
based on standards that were developed by
independent scientific organizations through periodic
and thorough evaluation of scientific studies. The
standards include a substantial safety m argin
designed to assure the safety of all persons,
regardless of age and health.
The FCC has granted an Equipm ent Authorization for
this m odel phone with all reported SAR levels
evaluated as in com pliance with the FCC RF em ission
guidelines. SAR inform ation on this m odel phone is
The exposure standard for wireless m obile phones
em ploys a unit of m easurem ent known as the
Specific Absorption Rate, or SAR. The SAR lim it set
by the FCC is 1.6W/kg.* Tests for SAR are conducted
on file with the FCC and can be found under the Display
Grant section
Potentially unsafe areas
Posted facilities–Turn your phone off in any facility when
posted notices require you to do so.
Aircraft–FCC regulations prohibit using your phone on a
plane that is in the air. Turn your phone off before
boarding aircraft.
OVFKWC-5135. Additional inform ation on Specific
Absorption Rates (SAR) can be found on the Cellular
Telecom m unications and Internet Association (CTIA)
Vehicles–RF signals m ay affect im properly installed or
inadequately shielded electronic system s in m otor
vehicles. Check with the m anufacturer of the device to
determ ine if it is adequately shielded from external RF
energy. Your physician m ay be able to help you obtain
this inform ation.
* In the United States and Canada, the SAR lim it for
m obile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial m argin of safety to give
additional protection for the public and to account for
any variations in m easurem ents.
Blasting areas–Turn off your phone where blasting is in
progress. Observe restrictions, and follow any
regulations or rules.
Caution
The user is cautioned that changes or m odifications not
expressly approved by the party responsible for
com pliance could void the warranty and user’s authority
to operate the equipm ent.
Potentially explosive atmospheres–Turn off your phone when
you are in any area with a potentially explosive
atm osphere. Obey all signs and instructions. Sparks in
such areas could cause an explosion or fire, resulting in
bodily injury or death.
Warning
Use only Kyocera approved accessories with Kyocera
phones. Use of any unauthorized accessories m ay be
dangerous and will invalidate the phone warranty if said
accessories cause dam age or a defect to the phone.
Areas with a potentially explosive atm osphere are often,
but not always, clearly m arked. They include:
•
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or chem icals
vehicles using liquefied petroleum gas, such as
propane or butane
Optimize your phone’s performance
Use the guidelines on page 2 to learn how to optim ize
the perform ance and life of your phone, antenna, and
battery.
•
•
areas where the air contains chem icals or particles
such as grain, dust, or m etal powders
any other area where you would norm ally be advised
to turn off your vehicle engine
Air bags
If you have an air bag, DO NOT place installed or
portable phone equipm ent or other objects over the air
bag or in the air bag deploym ent area. If equipm ent is
not properly installed, you and your passengers risk
serious injury.
Use with care
Use only in norm al position (to ear). Don’t bend the
antenna or touch it unnecessarily. Pull out the antenna
when on a call and push it in when the phone is not in
use. Avoid dropping, hitting, bending, or sitting on
the phone.
Radio Frequency (RF) energy
Your telephone is a radio transm itter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power of
the RF signal. This power level can range from 0.006
to 0.6 watts.
Keep phone dry
If the phone gets wet, turn the power off im m ediately
and return it to the dealer for service.
In August 1996, the U.S. Federal Com m unications
Com m ission (FCC) adopted RF exposure guidelines
with safety levels for hand-held wireless phones.
These guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies in the following
reports:
Resetting the phone
If the screen seem s frozen and the keypad does not
respond to keypresses, reset the phone by
com pleting the following steps:
1. Push the battery release button toward the top of
the phone.
•
•
•
ANSI C95.1 (Am erican National Standards Institute,
1992)
NCRP Report 86 (National Council on Radiation
Protection and Measurem ents, 1986)
ICNIRP (International Com m ission on Non-Ionizing
Radiation Protection, 1996)
2. Rem ove the battery.
3. Replace the battery.
If the problem persists, return the phone to the dealer
for service.
Qualified service
If you are experiencing problem s with your phone,
see “Getting Help” on page 43. If you have additional
questions, contact your service provider for technical
support. If the problem persists, return the phone
with all accessories and packaging to the dealer for
qualified service.
Your phone com plies with the standards set by these
reports and the FCC guidelines.
E911 Mandates
Where service is available, this handset com plies with
the Phase I E911 Mandate issued by the FCC.
Accessories
093 453 037
Use only Kyocera-approved accessories with Kyocera
phones. Use of any unauthorized accessories
(includes faceplates/front housings) m ay be
dangerous and will invalidate the phone warranty if
said accessories cause dam age or a defect to the
phone.
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121 U.S.A.
To purchase accessories, visit
To shop online for a Hands-free Car Kit and other
phone accessories, visit
(800) 349-4188 (U.S.A. only) or (858) 882-1410.
CONTENTS
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . 1
4
5
Sending and Receiving Text Messages . . 23
Sending a new text message . . . . . . . . . . . . . .23
Retrieving a text message . . . . . . . . . . . . . . . .27
Erasing text messages . . . . . . . . . . . . . . . . . .27
Installing the battery . . . . . . . . . . . . . . . . . . . .1
Getting to know your phone . . . . . . . . . . . . . .3
Understanding screen icons . . . . . . . . . . . . . .5
Performing basic functions . . . . . . . . . . . . . . .6
Customizing Your Phone . . . . . . . . . . . . . . . 29
Setting vibrate mode . . . . . . . . . . . . . . . . . . .29
Silencing all sounds . . . . . . . . . . . . . . . . . . . .29
Choosing a different ringer . . . . . . . . . . . . . .29
Adjusting volume . . . . . . . . . . . . . . . . . . . . . .30
Using shortcuts . . . . . . . . . . . . . . . . . . . . . . .31
Personalizing the screen . . . . . . . . . . . . . . . .32
Choosing a different language . . . . . . . . . . . .33
Creating a secure environment . . . . . . . . . . .34
Setting message alerts . . . . . . . . . . . . . . . . . .35
Connecting to a laptop or a PC . . . . . . . . . . .36
Connecting to a TTY/TDD device . . . . . . . . . .36
2
Making and Answering Calls . . . . . . . . . . . . 8
Making a call . . . . . . . . . . . . . . . . . . . . . . . . .8
Answering a call . . . . . . . . . . . . . . . . . . . . . . .8
Dealing with missed calls . . . . . . . . . . . . . . . .9
Viewing recent call details . . . . . . . . . . . . . . .10
Setting up speed dialing . . . . . . . . . . . . . . . .11
Finding a phone number . . . . . . . . . . . . . . . .11
Setting up voicemail . . . . . . . . . . . . . . . . . . .12
Silencing an incoming call . . . . . . . . . . . . . .13
Adjusting the volume during a call . . . . . . . .13
Receiving data or faxes . . . . . . . . . . . . . . . . .14
Selecting digital or analog mode . . . . . . . . . .14
Setting an alert for roaming charges . . . . . . .15
Calling emergency numbers . . . . . . . . . . . . .16
6
Connecting to the Internet. . . . . . . . . . . . . . 37
Starting the Web Browser . . . . . . . . . . . . . . .37
Bookmarking a Web site . . . . . . . . . . . . . . . .38
3
Storing Contacts . . . . . . . . . . . . . . . . . . . . . . 17
Saving a new contact . . . . . . . . . . . . . . . . . . .17
Editing a contact . . . . . . . . . . . . . . . . . . . . . .18
Finding contact information . . . . . . . . . . . . .18
Entering letters, numbers, and symbols . . . . .20
7
8
Using Tools and Playing the Game . . . . . . 40
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
vi
1
GETTING STARTED
This document describes the Kyocera 5135 trimode
phone, with CDMA digital service at 800 MHz and
1900 MHz, and analog service at 800 MHz.
Charging the battery
The battery is partially charged when you receive
your phone. You must have at least a partial charge
in the battery to make or receive calls, regardless of
whether or not the charger or adapter is connected
to the phone.
Your phone comes with a removable lithium ion
(LiIon) battery.
Installing the battery
1. Hold the phone face down.
To charge the battery, connect
the charger or adapter to the
jack on the bottom of the
phone, then connect the plug
to a wall outlet.
2. Place the battery in the phone casing, with the
metal contacts facing down and toward the
bottom of the phone.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
•
•
•
Charging (the icon is animated)
Partially charged
Fully charged
3. Push the battery until it clicks into place.
4. Fully charge the battery before using the
phone.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
User Guide for the Kyocera 5135 Phone
1
Removing the battery
Caring for the battery
1. Turn off the phone by opening the flip and
This section describes important safety information
holding down
appears.
until “Powering off”
and tips for improving battery performance.
General safety guidelines
2. Close the flip and hold the phone face down.
•
•
•
•
Do not take apart, puncture, or short-circuit
the battery.
3. Push the battery release button toward the top
of the phone (a).
If you have not used the battery for more than a
month, recharge it before using your phone.
a
Avoid exposing the battery to extreme
temperatures, direct sunlight, or high humidity.
Never dispose of any battery in or near a fire. It
could explode.
Common causes of battery drain
The following functions drain the battery more
quickly and adversely affect talk and standby times:
4. Grasp the sides of the battery and pull it away
from the phone (b).
•
•
You are often playing games or using the Web.
Backlighting is frequently on. (To adjust
backlighting, see page 32.)
b
•
The phone is frequently used in analog mode.
If you do not see a
on the home screen,
the phone is in analog mode. To set your
phone to operate in different modes, select
2
Getting Started
Menu → Settings → Network →
Digital or Analog and choose from the options
available.
Getting to know your phone
1
Jack for Hands-free Headset (sold separately) only.
•
•
•
You are far away from a base station or cell site
when in digital mode.
1
Data cables or accessories, such as the Hands-
free headset, are connected to the phone.
No service is available, or service is available
intermittently. The phone requires more power
to acquire service than to maintain consistent
service.
•
•
The earpiece and ringer volume settings are
high. To adjust volume, see page 30.
2
Jack for AC Adapter (included) and data cable
(sold separately).
Review how often voicemail notifications,
pages, and text messages are received, and how
quickly they are acknowledged. To use power
most efficiently, acknowledge notifications and
messages immediately.
2
User Guide for the Kyocera 5135 Phone
3
1
2
Home screen. Press
(item 3) to select Menu.
Navigation key (all directions) scrolls through lists and positions
cursor. Also accesses shortcuts from the home screen:
(up) lists recent calls; (right) turns off ringers; (down) lists contacts;
(left) defines and accesses a personal shortcut.
3
4
OK key selects a menu item or option.
Send/Talk key starts or answers a call.
5
6
7
Use the keypad to enter numbers, letters, or symbols.
* Text key changes the text mode in text entry.
Fully extend the antenna to make or answer a call. Push in the
antenna completely when the phone is not in use.
8
9
Clear key erases the last character in text entry, or returns to the
previous menu.
End/Power key turns on and turns off the phone, ends a call, or
returns to the home screen.
10
11
# Space key enters a space during text entry.
®
0 Next key cycles through word choices during T9 Text Input rapid
text entry (available in English only).
4
Getting Started
Understanding screen icons
These icons may appear on your phone screen:
The phone is operating in CDMA digital
Enhanced CDMA voice privacy is on, if
available from your service provider, or
you are in a secure web browser session.
Press
up.
mode. If
does not appear, the phone
is operating in analog mode.
Press
Press
down.
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
to go back or clear an item.
Enter text using TegicTM T9® Text Input
rapid text entry (available in English only)
®
The phone is not receiving a signal. You
cannot make or receive calls.
Enter text using normal alpha text entry.
A call is in progress.
Capitalize the next letter when entering
text.
The alarm clock is set.
Capitalize every letter when entering text.
The phone vibrates instead of ringing.
Capitalize the first letter of each word
when entering text, or the first letter of
each sentence in a text message.
The phone is roaming outside of its home
service area.
You have a text message, voicemail, or
Enter symbols.
page. (
indicates an urgent text
message, voicemail, or page.)
Enter numbers.
The battery is fully charged. The more
black bars, the greater the charge.
The battery charge is extremely low. When
this icon blinks, power will be lost soon.
User Guide for the Kyocera 5135 Phone
5
Performing basic functions
To...
From the home screen...
Turn the phone on
Open the flip, press , and wait until the phone beeps. The phone will
remain on when the flip is closed.
Open the flip, then press and hold
Turn the phone off
Make a call
until you see “Powering Off.”
Open the flip, extend the antenna, enter the number, then press
Press
Open the flip. If the phone continues to ring, press
.
End a call
.
Answer a call
Set up voicemail
.
Press and hold
and follow the system prompts. Contact your
service provider for details.
Access voicemail
Verify your phone number
Silence the ringer
Silence all sounds
Access contacts
Press and hold
.
Select Menu → Phone Info.
Open the flip or press
, then
to answer.
Press and hold
Press down.
right.
6
Getting Started
Using menus
The contents of the main menu are as follows:
Contacts
View All
Add New
Find Name
Speed Dial List
Business List
Personal List
Information
Tools
Recent Calls
(Lists 15 recent calls)
Messages
Voicemail
Send New
Text InBox
Net Alerts
Text OutBox
Filed
Settings
Silence All
Sounds
Display
Security
Call Information
Network
Extras
Messaging
Accessories
Alarm Clock
Tip Calculator
Calculator
Countdown
Stopwatch
Brick AttackTM
Phone Info
(Displays your phone
number for reference)
Erase Msgs
Msg Settings
Web Browser
(Prompts connection to the
Internet)
To use menus:
* These instructions assume your menu appears in
icons. To make it appear as a list, select
Menu → Settings → Display → Main Menu View.
In this guide, an arrow → tells you to select an
option from a menu. For example,
Menu → Settings means select Menu, then
select Settings.
•
•
Press
to select Menu; then press
left or
right to see menu options.*
Press
to select a menu option; then press
up or down to see menu contents.
•
•
Press
Press
to go up a menu level.
to return to the home screen.
User Guide for the Kyocera 5135 Phone
7
2
MAKING AND ANSWERING CALLS
Redialing a number
To redial the last number called, press
Making a call
1. Make sure you are in an area where the signal
can be received. Open the flip and look for the
§ symbol on the home screen.
twice.
Answering a call
When a call comes in, the phone will ring or
vibrate.
Note: The more bars you see in this symbol, the
clearer the reception will be. If there are no
bars, try to move to where the reception is
better. In some cases, this can be as simple as
turning to face a different direction.
•
To answer the call, open the flip. If the phone
continues to ring, press
.
You can set the phone to answer in two ways:
Answer automatically when you open the flip or
2. Enter the phone number.
don’t answer until you press
setting, see “Changing the way you answer calls” on
page 9.
. To change the
3. Press
.
Note: If your phone cannot locate a signal for
15 minutes, it changes to power-save mode. If
you see the message “Power Save Mode” and a
on the screen, press any key to return to
To change the ringer, see “Choosing a different
ringer” on page 29.
normal operating mode and try your call again.
Answering calls hands-free
4. When you are done, close the flip or press
If your phone is attached to a portable hands-free
car kit (sold separately), you can set it to answer an
incoming call after five seconds.
to end the call.
Exception: You must press
to end the call
if you are using the phone for a data or modem
call or if an accessory such as a headset or
portable hands-free car kit is attached.
•
Select Menu → Settings → Accessories →
Auto-Answer → After 5 seconds.
8
Making and Answering Calls
Changing the way you answer
calls
You can set the phone to answer immediately when
you open the flip, or to continue ringing until you
Dealing with missed calls
When you have missed a call, a “Missed” message
appears on your screen and the phone may beep
(see “Setting missed call alerts,” below). The
message remains on the screen until the caller
leaves a voicemail or until you open and close the
flip.
press
.
1. Select Menu → Settings → Extras →
Answer with Flip.
•
•
Press
or
to clear the screen.
2. Highlight an option and press
to select it:
To view the caller’s number or name, select
Calls. In the Recent Calls list, the missed call is
indicated with a flashing
–
–
Enabled causes the phone to answer when
you open the flip.
.
You will not see caller information on the
screen before you answer, and you will not
be able to silence the ringer at the time you
receive a call.
•
If the caller left a voicemail message, select
Voice. If you have not yet set up your voicemail,
the caller cannot leave a message. For help
setting up voicemail, see page 12.
Disabled causes the phone to continue
Setting missed call alerts
ringing when you open the flip.
You can set an alert to beep every five minutes after
you have missed a call.
A dancing phone icon appears on the
screen along with the phone number of the
caller. If the number is stored in your
contacts directory, the contact name
•
Select Menu → Settings → Sounds →
Missed Call Alert → Enabled.
appears. To answer the call, press
.
•
To turn off the alert when it rings, press
or
.
User Guide for the Kyocera 5135 Phone
9
•
To cancel the alert option, select Menu →
Settings → Sounds → Missed Call Alert →
Disabled.
–
–
Time—View the time of the call.
Number—View the caller’s number (for an
incoming call), or the number you called
(for an outgoing call).
Viewing recent call details
–
–
–
Save New—Save the number in your
Contacts directory.
Details on the last 15 calls you made or received
are stored in the Recent Calls list. You can get
details on the caller’s name and phone number,
along with the time and length of the call. Icons
indicate the types of calls in the list. (Your network
may not support all call types listed. Check with
your service provider.)
Add to—Add the number to an existing
contact card.
View Contact—View details on the contact
if the caller’s information is already in your
Contacts directory.
Note: If the number has been saved as “secret,” you
must enter your four-digit lock code to view or edit
the number. For information on the lock code, see
page 34. Details about making a phone number
secret are described in “Saving a new contact” on
page 17.
Call to
Call from
Three-way call
Forwarded call
Missed call (flashing)
Erasing calls from the list
To erase all calls from the Recent Calls list, see
page 35.
To view call details:
1. Select Menu → Recent Calls.
2. Select a recent call item.
3. Select an option:
10
Making and Answering Calls
Using 1-Touch Dialing
Setting up speed dialing
Speed dialing allows you to quickly dial a stored
phone number by entering a one- or two-digit
speed dialing location.
To dial a phone number, simply press and hold the
assigned speed dialing location for the phone
number. If it is a two-digit number, press the first
number, then press and hold the second. For
example, if the speed dialing number is 15, press
1. Open a saved contact.
2. Highlight the phone number and press
3. Select Speed Dialing.
.
, then press and hold
.
Removing a speed dialing location
1. From the home screen, select
4. Select a speed dialing location. (Location “1” is
reserved for your voicemail number.)
Menu → Contacts → Speed Dial List.
5. Press
to select Assign.
2. Select a speed dialing location.
3. Highlight the phone number and press
4. Select Speed Dialing.
To speed dial
From the home screen, enter the one- or two-digit
.
speed dialing location and press
.
5. Press
right to highlight Remove.
Setting up 1-Touch Dialing
6. Press
.
1-Touch Dialing is a form of speed dialing that
allows you to press and hold a speed dial location
to make a call. It is the fastest way to speed dial.
Finding a phone number
If you have already saved a phone number, you can
find it quickly by pressing down. This brings
up a complete list of all saved contacts. Scroll down
the list, find the one you want, and press to
dial the number. For more information on finding
contact information, see page 18.
1. Select Menu → Settings → Extras →
1-Touch Dialing → Enabled.
2. Press
.
User Guide for the Kyocera 5135 Phone
11
If you see “New Message” on your screen
1. Press to select Voice. This initiates a call
to your voicemail number.
Setting up voicemail
Before your phone can record voicemail messages,
you must set up a password and record a personal
greeting. When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
2. Follow the prompts to retrieve the message. For
specific information on getting voicemail
messages, contact your service provider.
If you see the
symbol
(Check with your service provider for availability.)
1. Select Menu → Messages.
1. From the home screen, press and hold
Note: If you are having trouble accessing your
voicemail, contact your service provider.
.
2. Select your Voicemail box. A message tells you
there is a new message at your voicemail
number.
2. Follow the system prompts to create a password
3. Press
to select Call. This initiates a call to
and record a greeting.
your voicemail number.
4. Follow the prompts to retrieve the message. For
specific information on getting voicemail
messages, contact your service provider.
Checking voicemail messages
When a voice message is received, your screen will
display text similar to: “New Message 1 Voicemail,”
and the phone may beep or vibrate (see “Setting
voicemail alerts” on this page).
Setting voicemail alerts
You can set an alert to beep or vibrate once or
every five minutes after you have received a
voicemail message.
The text will remain on the screen for about five
minutes or until you close the phone flip. After that,
the
symbol appears at the top of your screen.
1. Select Menu → Messages →
The symbol flashes if the message is Urgent.
Msg Settings → Voicemail Alert.
12
Making and Answering Calls
2. Press
to select an option:
change the setting, see “Changing the way you
answer calls” on page 9.
–
–
Disabled—Turn alert off.
Vibrate once—Vibrate once when message
Adjusting the volume during a
call
is received.
–
Vibe & remind—Vibrate when message is
To adjust the earpiece volume manually during a
received, and every five minutes until you
open and close the flip or press
call, press
up or down.
.
Note: To set the phone to adjust the earpiece
volume automatically based on the amount of noise
around you or the other person’s voice volume
level, see “Adjusting the earpiece volume” on
page 30.
–
–
Soft beep once—Beep softly once when
message is received.
Soft beeps—Beep softly when message is
received, and every five minutes until you
open and close the flip or press
.
Keeping track of your calls
Your phone has two timers that count the amount
of calls you have made and received.
–
–
Loud beep once—Beep loudly once when
message is received.
Loud beeps—Beep loudly when message is
received, and every five minutes until you
All Calls
open and close the flip or press
.
This timer displays the total number and duration
of all calls you have made and received. You cannot
reset this timer.
Silencing an incoming call
•
Press
to silence the ringer. Then press
to answer the call.
•
Select Menu → Settings →
Call Information → All Calls Timer.
If the flip is closed when the call comes in, and if
your phone is set to answer when you open the flip,
you cannot silence the call without answering it. To
User Guide for the Kyocera 5135 Phone
13
1. Select Menu → Settings → Network →
Recent Calls
Data/Fax Calls In.
This timer displays the total number and duration
of recent calls you have made and received since
the last time you reset the timer.
2. Press
to select an option:
–
–
Voice Only—Allow only voice calls.
1. Select Menu → Settings →
Fax, next call—Set the phone to fax mode
for the next incoming call or the next
10 minutes.
Call Information → Recent Calls Timer.
2. Press
to zero.
to select Reset. This resets the timer
–
Data, next call—Set the phone to data
mode for the next incoming call or the next
10 minutes.
Timing your calls
If you want to know how long you are spending on
a call, you can set up your phone to beep
10 seconds before each minute.
–
–
Fax, until off—Force the phone into fax
mode until the phone is turned off.
Data, until off—Force the phone into data
•
Select Menu → Settings → Sounds →
mode until the phone is turned off.
Minute Alert → Enabled.
Receiving data or faxes
Selecting digital or analog
mode
This setting allows you to force the phone into
either digital or analog mode. This is useful if you
are in an area that borders on digital service and
the automatic feature is causing the phone to keep
switching between modes.
Your phone can receive certain data or faxes,
depending on the system sending the information.
However, to receive data or faxes, you must switch
from voice mode to data/fax mode.
(Your network may not support these call types.
Check with your service provider.)
1. Select Menu → Settings → Network →
Note: You cannot receive voice calls while the
phone is in data/fax mode.
Digital or Analog.
14
Making and Answering Calls
2. Select an option and press
.
–
–
On roam change alerts you with two tones,
decreasing in intensity, when roaming
service is acquired. When home area
service is acquired again, you hear three
tones, increasing in intensity.
–
–
–
–
Automatic automatically switches the phone
between digital and analog.
Analog only sets the phone to work in
analog mode only.
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Analog call forces a call into analog mode
for the duration of the next call.
Digital only sets the phone to work in
digital mode only.
Controlling network roaming
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone will accept.
Setting an alert for roaming
charges
Use this setting if you want the phone to alert you if
you roam outside of your home service area.
1. Select Menu → Settings → Network →
1. Select Menu → Settings → Network →
Roam Option.
Roam/Srvc Alert.
2. Select an option and press
.
2. Select an option and press
.
–
Automatic (recommended setting) accepts
–
Disabled will not alert you if you roam
any system the phone service provides.
outside your home service area.
–
No roaming prevents you from making or
receiving calls outside of your home service
area.
–
When no service alerts you with three
tones, decreasing in intensity, when service
is lost. When service is acquired again, you
will hear three tones increase in intensity.
User Guide for the Kyocera 5135 Phone
15
Note: If your phone has more than one setting for
Automatic, contact your service provider to
determine which one to use.
Calling emergency numbers
You can place calls to 911 even if your phone is
locked or your account is restricted.
Making and receiving calls after
dialing 911
Any time you make a 911 call, your phone goes into
“emergency mode.” This enables the emergency
service exclusive access to your phone so they can
call you back if necessary. In order to make or
receive regular calls after dialing 911, you must exit
this mode.
When you have completed the 911 call, press
to select Exit. Then press
again to confirm
your choice. The phone returns to standby mode
(the home screen) and you are ready to make and
receive calls.
16
Making and Answering Calls
3
STORING CONTACTS
Use your phone’s Contacts directory like a set of
phone index cards to store information about a
person or company. Your phone can hold, on
average, about 200 contacts.
–
–
location from the list.
Secret—Select Yes to lock the phone
number. If a phone number is locked, you
must enter your four-digit lock code (see
page 34) to view or edit the number.
Saving a new contact
1. From the home screen, enter the phone
–
–
Primary Number—Classify this number as
the primary number for the contact.
number you want to save.
2. Press
to select Save New.
Classify Contact—Classify the contact as
Personal or Business. (Tip—For
information about setting up business or
personal ringers, see ”Specifying ringers for
different calls” on page 30.)
3. Enter a name for the contact, then press
If you need to know how to enter letters, see
page 20.
.
4. Press
-or-
to select Save.
5. Press
to select Save. A message appears:
“Contact Successfully Saved!”
Press
down then right, then press
to select Options. Press
select an option from the list:
up or down to
Adding a code or extension
When you save the phone number of an automated
service, you may include a pause where you would
select an option or enter a password. You can enter
multiple pauses in a phone number.
–
Save—Save information and return to the
home screen.
–
Number Type—Select work, home, mobile,
pager, or fax.
1. Enter the first portion of the phone number.
User Guide for the Kyocera 5135 Phone
17
2. Press
right to scroll through the options
to select a type of pause.
3. Select Options → Erase Contact to erase the
at the bottom of the screen.
entire contact.
-or-
3. Press
Select the phone number, then select Erase
Number to erase the phone number.
A Time Pause causes the phone to stop
dialing for two seconds.
4. Select Yes to erase.
A Hard Pause causes the phone to stop
dialing until you select Release.
Finding contact information
There are two main methods for finding a phone
number or contact details: Searching the Contacts
directory and using Fast Find.
4. Enter the remaining numbers.
Editing a contact
1. Select Menu → Contacts.
2. To find the contact you want to edit, select
Searching the Contacts directory
1. Select Menu → Contacts.
2. Select a search method:
either View All or Find Name.
3. Press
to select the contact to edit.
– To view a list of names, select View All
4. Select Options to edit the entire contact, or
select the specific information (such as the
phone number) you want to edit.
– To find a specific name, select Find Name.
Enter part of the name and select Find.
3. Scroll down until you find the name you want.
5. Enter the new information.
– To call the contact, select the number and
6. If finished, press
to select Save.
press
.
Erasing information from a contact
– To display the full contact, press
.
1. Select Menu → Contacts → View All.
2. Press
to select a card.
18
Storing Contacts
Setting up Fast Find
With Fast Find, you press one or two keys to view
close matches of the number you are looking for.
1. From the home screen, select
Menu → Settings → Extras → Fast Find.
2. Select Enabled.
Using Fast Find
1. Press the keys corresponding to the letters of
the name you want to find. The matching
contacts appear on the screen.
Note: Speed dial locations appear before
names if they use the same keys. For example,
to look for Abe’s contact entry, you press
for “A”. However, there is a speed dial location
associated with 2, so the speed dial contact
appears first. To find Abe’s number, you would
then press the key that corresponds to the next
letter of his name.
2. When you see the name you want, you can press
to call the number, or press
contact details.
to view
3. If you do not see the name you want, press
up or down to search the possibilities.
User Guide for the Kyocera 5135 Phone
19
Entering letters, numbers, and symbols
Use this table for general instructions for entering letters, numbers, and symbols in a contact card. For more
detailed information on using text entry modes, see ”Understanding text entry modes” on page 21.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter
you want. For more information, see page 21.
Use mode and press a key once to enter its number.
For more options, see page 21.
Enter a number
Enter a symbol
Press
until you find the symbol you want. There are
more symbols under the symbol text mode. See page 21.
Enter a space
Press
Press
.
Erase a character
.
Erase all characters
Press and hold
.
Move the cursor right or left
Change text entry modes
Capitalize the next letter
Capitalize every letter
Press
Press
right or left.
.
Press and hold
Press and hold
Press and hold
. Choose
. Choose
.
.
Capitalize the first letter of each word
. Choose
.
Highlight an option at the bottom of the screen Press
down, then press
left or right.
20
Storing Contacts
Entering words quickly
Understanding text entry modes
®
When you press a series of keys in rapid text mode,
There are four modes:
®
TegicTM T9 Text Input checks its dictionary of
Enter Name:
Number mode
common words and guesses at the word you are
trying to spell.
Normal Text
1. For each letter of the word you want, press the
ꢀ ꢁ
Save
O...
Rapid Text
®
key once. For example, to enter the word “any”
press:
→
→
.
Symbol mode
Current mode
Tip: Don’t look at the screen until you have
pressed a key for each letter of the word.
Note: The mode you start in depends on the task
you are doing. If you are entering a phone number,
you start in number mode. If you are entering a
name for a contact, you start in normal text mode.
2. If the word doesn’t match what you want, press
to look at other word matches.
3. When you see the word you want, press
.
Entering numbers
Entering symbols
While entering text, you can enter symbols by
•
In
mode, press a number key once.
•
In
mode, press and hold a number key
pressing
The following symbols are available:
& @ ,
To access a full set of symbols:
until you see the symbol you want.
until the number appears on the screen.
•
In mode, press and hold a number key
until the number appears on the screen.
®
.
-
‘
:
;
?
/
“
(
)
_
Entering words letter by letter
1. Press
right to highlight the current text
to enter the menu.
1. Press a key once for the first letter, twice for the
mode and press
second letter, and so on.
2. Select
Symbols.
down to view the list of symbols.
2. Wait for the cursor to move right and enter the
3. Press
next letter.
User Guide for the Kyocera 5135 Phone
21
4. Press the number key corresponding to the
Changing text entry modes
symbol you want.
In order to enter characters belonging to another
text entry mode, you need to change modes. For
example, to enter numbers in an email address
Entering accented characters
If your phone is set to a language other than
English, use the following key references to enter
while you’re in
change to
Normal Text mode, you
Number mode, enter the number,
accented characters using
mode.
and then change back to
the address.
mode to complete
Spanish
To change text entry modes, you can either:
A Á B C 2
D E É F 3
G H I Í 4
•
•
Press
-or-
to switch modes.
Press
mode, press
right to highlight the current text
to enter the menu, then
M N Ñ O Ó 6
select a different mode.
T U Ü Ú V 8
French
A À Â B C Ç 2
D E Ë È É Ê F 3
G H I Ï Î 4
M N O Ô Œ 6
T U Ü Ú V 8
22
Storing Contacts
4
SENDING AND RECEIVING TEXT MESSAGES
The features and menus described in this chapter
may vary depending on services available in your
area. In addition, usage charges may apply to each
message. For clarification on these issues, check
with your service provider.
You now have the option of writing your own
message or sending a pre-written message.
– To send a pre-written message, see page 24.
– For help entering text, see page 20.
4. When you are finished with the body of the
message, press
twice to select Next.
Sending a new text message
You can only send text messages to phones that are
capable of receiving them, or to email addresses.
Check with your service provider for availability.
5. Choose one of the following options:
–
–
–
Send Message—Send the message
immediately. A copy is saved to your Text
OutBox.
1. Select Menu → Messages → Send New.
Callback Number—Include a callback
number with the message. See “Including a
callback number” on page 24.
2. Enter the phone number or email address of
the person to whom you are sending the
message, or select Contacts to choose a saved
phone number or email address.
Delivery Receipt—Request notification
when the message has been received.
Note: If you wish to enter an email address, you
need to switch text entry modes. To enter
–
–
Priority—Label the message as “Urgent.”
letters, press
to switch to
mode. To
Send Later—Schedule when to send the
message. See “Sending a message at a
scheduled time” on page 25.
enter symbols, press
until you find the
symbol you want. See page 21 for more
information on text entry modes.
3. Press
to select Next.
User Guide for the Kyocera 5135 Phone
23
–
–
Save Message—Save the message in your
Filed folder.
Sending a pre-written message
Your Kyocera 5135 phone comes with a set of
commonly used messages, such as “Call me,”
“Need directions,” or “I’m delayed.”
Exit—Cancel the message without saving.
Receiving incoming calls while creating
messages
1. Select Menu → Messages → Send New and
enter the phone number or email address of the
recipient.
•
If you answer the call, you can continue working
on the message when you are finished with the
call by selecting Menu → Messages →
Text OutBox and opening the message.
2. Select Next.
3. Press
AutoMsg.
down, then right and select
•
If you don’t wish to answer the call, select
Ignore. The call is silenced and you return to
the screen you were working in.
4. Press
up or down to scroll through the
list of message options.
5. Press
to select a message. If you wish,
Sending a message to several
recipients
enter additional text.
6. Press
.
If you are sending a message to more than one
person, enter a space or a comma between each
phone number or email address. If you are sending
to more than one contact in your Contacts directory,
the phone automatically inserts a comma after each
contact. The messages are sent one at a time, once to
each addressee. You can send a message to up to
10 contacts at once.
7. Press
left and select Next.
Including a callback number
A callback number lets the recipient of a message
know at what number they can call you back.
After creating a message and selecting Callback
Number from the message options screen, you have
the option of including your own phone number or
a specified number.
24
Sending and Receiving Text Messages
Including your own phone number
Sending a message at a scheduled
time
If you do not wish to send the message immediately,
you can schedule to send it later.
1. Create the message, and choose Callback
Number from the message options screen. (For
help creating the message, see page 23.)
2. Press
to select Yes.
1. Create the message, and choose Send Later
3. Press
up and select Send Message.
from the message options screen.
The message is sent and a copy is saved to your
Text OutBox.
2. Select a time when you wish the message to be
sent (the options are 30 minutes, 1 hour,
2 hours, 12 hours, 1 day, 2 days, and 3 days).
The message is scheduled for delivery and
shown in your Text OutBox.
Including a different number
1. Create the message, and choose Callback
Number from the message options screen. (For
help creating the message, see page 23.)
3. When you return to the options screen, press
up and select Send Message.
2. Press
right and select Other.
The message is sent from your phone
immediately, but then held by your service
provider’s network for the specified period of
time before it is sent.
3. You can enter a phone number, email address,
or text. To enter letters, you must change the
text entry mode. For help, see page 22.
4. Press
to select Done.
Sending a previously saved message
1. Select Menu → Messages → Filed.
5. Press
up and select Send Message.
The message is sent and a copy is saved to your
Text OutBox.
2. Press
up or down through the list of
to select one.
to select Send To.
messages and press
3. Press
User Guide for the Kyocera 5135 Phone
25
4. Enter the phone number or email address of
the person to whom you are sending the
message, or select Contact to select a phone
number or email address from a contact.
Ç
{
The message cannot be sent because
service is not available. An alert appears on
your phone if the message cannot be sent.
The scheduled message has been sent and
will be delivered as scheduled. You cannot
cancel delivery of the message.
5. Press
to select Next.
If you cannot send messages
|
The message has been received by the
recipient you have specified.
You may not be able to send or receive messages if
your phone’s memory is nearly full, or if service is
not available at that time. To free up memory, erase
old messages.
z
The message has never been sent, or has
not been sent since it was last modified. You
can cancel delivery of the message.
Viewing the Text OutBox
3. Press
to accept the message text.
1. Select Menu → Messages → Text OutBox.
– For help scheduling an amount of time to
wait before sending the message, see
“Sending a message at a scheduled time” on
page 25.
2. Press
up or down through the list of
messages. One of the following symbols
appears next to each message:
á
The message is pending and will be sent
when possible. You can cancel delivery of
the message.
– For help requesting delivery notification or
labeling the message as Urgent, see
“Sending a new text message” on page 23.
C
The message is scheduled to be sent at a
scheduled time. You cannot cancel delivery
of the message.
4. When you are ready, select Send Message.
A copy is saved to your Text OutBox.
26
Sending and Receiving Text Messages
5. When you are finished, select an option from
Retrieving a text message
When a text message is received, it is sent to your
Text InBox and you are alerted by:
the bottom of the screen:
–
Reply to the sender.
–
Erase the current message.
•
•
A note: “New Message: 1 Text”.
–
–
Save the message to your Filed folder.
Sender allows you to view the sender’s
information. You can select an option to
save it to the Contacts directory.
Forward the message.
A symbol:
urgent.
, which flashes if the message is
If you see the New Message note
You can choose to:
–
–
Done returns you to the Text InBox.
•
•
View the message—Press
.
6. Press
to see information such as callback
Ignore the message—Press
select Ignore.
right and
number, email address, or URL. (If a callback
number is included with the message, press
again to call the number.)
•
Clear the screen—Press
.
If you see the
symbol
Erasing text messages
1. Select Menu → Messages → Text InBox.
A list of all your received messages appears.
New, unread messages appear in bold.
indicates an “Urgent” message.
You have the option of erasing messages as you
read them, erasing them one-at-a-time from the list
in the Text InBox, or erasing them all at once. It is a
good idea to erase old messages, as you have
limited memory on your phone.
2. Press
up or down to scroll through the
list of messages.
Erasing single messages
3. Press
to read a message.
4. If the message is long, press
down to view
1. Select Menu → Messages.
the entire message.
User Guide for the Kyocera 5135 Phone
27
2. Press
down and press
to select the
type of message you want to erase (Text InBox,
Text OutBox, or Filed).
3. Press
to select the message to erase.
4. Select Erase to erase the message. A notification
appears: “Erase this message?”
5. Select Yes to erase the message.
28
Sending and Receiving Text Messages
5
CUSTOMIZING YOUR PHONE
Note: The phone will ring when it is attached to an
external power source (such as a charger), even if
the Silence All setting is selected.
Setting vibrate mode
You can set the phone to vibrate or to vibrate and
then ring when you receive an incoming call.
Turning sounds back on
The quickest way to turn sounds back on is to press
right and hold.
1. Select Menu → Settings → Sounds →
Call Ring/Vibe.
2. Select Ring only, Vibrate only, or
Vibrate then ring.
You can also use menus:
1. Select Menu → Settings → Silence All.
2. Select No, normal.
Silencing all sounds
There is a quick and easy way to silence all sounds
(including alert beeps, rings, and keypress beeps)
and to set your phone to vibrate for incoming calls,
alerts, and menu navigation.
3. Press
to save your selection.
Choosing a different ringer
Your Kyocera 5135 phone has several ringers you
can choose from for your incoming calls.
•
From the home screen, press
hold. Notice that a appears on the screen,
indicating the phone has silenced all sounds.
right and
1. Select Menu → Settings → Sounds →
Ringer Type.
Specifying just vibration or just lights
1. Select Menu → Settings → Silence All.
2. Select Yes, vibe only.
2. Scroll down the list to hear the different rings.
3. Press
to select a ringer from the list.
Note: Use caution in bringing the phone close to
your ear while sample ringers are playing.
3. Press
to save your selection.
User Guide for the Kyocera 5135 Phone
29
Setting automatic volume adjustment
You can set your phone to automatically adjust the
earpiece volume during a call, based on the
surrounding noise level.
Specifying ringers for different calls
You can set up your phone to ring differently
depending on the type of call you get.
1. If you have not already done so, save the contact
in your Contacts directory and specify it as
personal or business. For help, see page 17.
1. Place a call from a quiet environment and set
the volume to a comfortable level.
2. When you are finished with the call, select
Menu → Settings → Sounds →
Smart Sound.
2. Select Menu → Settings → Sounds →
Business Call Ring or Personal Call Ring.
3. Select a ringer from the list.
3. Select Enabled. The volume you have just set is
now used as a baseline. You can still manually
adjust the volume during a call.
Importing additional ringers
You can import additional ringers into your
Kyocera 5135 phone using the Kyocera Phone
Desktop software (sold separately). To purchase
this software and other accessories, visit
4. Press
to save the setting.
Adjusting the ringer volume
1. Select Menu → Settings → Sounds →
You may be able to download ringers over-the-air.
Check with your service provider for availability.
Ringer Volume.
2. Press
right to increase the volume, or left
to decrease the volume.
Adjusting volume
Changing the key beep
Adjusting the earpiece volume
The key beep is the sound made when you press the
keys on the keypad. You can change the sound
(tones or clicks), length (normal or long), and
volume of the key beep.
To adjust the earpiece volume manually during a
call, press
level.
up or down to find a comfortable
30
Custom izing Your Phone
To change the various elements of the key beep,
select Menu → Settings → Sounds and choose
either Key Beep Volume, Key Beep Length, or
Key Beep Sound.
Creating a feature shortcut
1. Select Menu → Settings → Display →
Shortcut Key.
2. Highlight the feature you want set as a shortcut,
and press
to select it.
Using shortcuts
– Choose InBox, Send New Msg, Ringer
Volume, Business List, Personal List, Web
Browser, Stopwatch or Calculator and
their respective menu or feature appears.
From the home screen, you can access four
shortcuts by pressing the navigation key in any one
of four directions:
Access your recent calls.
–
None disables the shortcut.
*
Up
Accessing a feature shortcut
From the home screen, press
the prompts.
Press and
hold to
define or use
a shortcut.
Press and
hold to set
the phone
to vibrate.
left and follow
' Left
Right &
Down
+
Re-assigning a feature shortcut
To change the shortcut you have assigned:
Access your saved contacts.
1. Select Menu → Settings → Display →
Shortcut Key.
Three shortcut keys are automatically programmed
into your phone (up, right, and down). For the
fourth (left), you can assign a shortcut to one of the
various features of your phone. See “Creating a
feature shortcut.”
2. Highlight the new feature and press
to
select it.
User Guide for the Kyocera 5135 Phone
31
Choosing a different menu view
You can change the appearance of the menus you
see when you select Menu from the home screen.
Personalizing the screen
Changing your banner
The banner is the personal label for your phone. It
appears on the home screen above the time and
date. The banner can be up to 14 characters long.
To change the menu view:
•
Select Menu → Settings → Display →
Main Menu View, then the option you want:
Note: On certain networks you may see a network
message in place of your banner for a short period
of time. This will be cleared on its own.
Large Icons
Small Icons
List Menus
1. Select Menu → Settings → Display →
Main Menu
ꢄ
ꢂ
Contacts
My Banner.
ꢃ
Messages
Web Browser
2. Select Edit.
ꢃ
Contacts
Contacts
3. Press
to clear the screen.
4. Enter your new text.(For help, see “Entering
(Note: If you change to List Menus, you will need
to press up or down to see menus.)
letters, numbers, and symbols” on page 20.)
5. Press
to save.
Adjusting the backlighting
Choosing a different time/date format
1. Select Menu → Settings → Display →
Your screen lights up while you are in a call or
when you press a key on the keypad. However, you
can change when and how backlighting lights up.
Time/Date Format.
2. Highlight the option you want.
1. Select Menu → Settings → Display →
Backlighting.
2. Select an option from the list:
32
Custom izing Your Phone
–
–
–
–
Disabled—turns backlighting off
completely.
2. Select Always on to keep backlighting on. (The
battery charges more slowly when power
backlighting is on.)
10 seconds—turns backlighting on for
10 seconds after your last keypress.
Changing the display contrast
1. Select Menu → Settings → Display →
30 seconds—turns backlighting on for
30 seconds after your last keypress.
Display Contrast.
10 sec. & in call—turns backlighting on
during a call, and for 10 seconds after your
last keypress.
2. Select the level of contrast you want (Highest,
High, Medium, Low, and Lowest).
Setting numbers to auto-hyphenate
–
30 sec. & in call—turns backlighting on
during a call, and for 30 seconds after your
last keypress.
Auto-hyphenation automatically inserts hyphens
into your phone numbers to be consistent with the
U.S. dialing plan. For example, 1-222-333-4444.
Note: Keeping backlighting on during a call drains
the battery more quickly and reduces talk and
standby times.
1. Select Menu → Settings → Display →
Auto-Hyphenation.
Setting power backlighting
2. Select Enabled to turn this feature on.
You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
Choosing a different language
Your phone may support alternate languages.
Note: Power backlighting may not be available with
some accessories. Check with your service
provider.
1. Select Menu → Settings → Display →
Language.
2. Select the language and press
.
1. Select Menu → Settings → Accessories →
Pwr Backlighting.
User Guide for the Kyocera 5135 Phone
33
2. Select an option:
Creating a secure environment
–
–
Never—does not lock the phone.
This section describes the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
On power up—locks the phone every time
you turn it on.
–
Now—locks the phone immediately.
3. Press
.
Changing your lock code
The lock code is typically 0000 or the last four
digits of your phone number.
Unlocking the phone
1. From the home screen, select Unlock.
2. Enter your four-digit lock code.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code and select
Change Lock Code. A message appears:
“Change Lock Code?”
Restricting calls
You can restrict the calls that can be made from
your phone to only those that have been saved in
your Contacts Directory.
3. Select Yes and enter a new four-digit code, then
press
. Enter your new lock code again.
Note: Restricting calls blocks the Phone Info menu
from displaying your mobile phone number.
Locking your phone
1. Select Menu → Settings → Security →
When your phone is locked, you can call only
emergency numbers, such as 911, or a service
provider number, such as *611. You can receive
incoming calls, but you cannot use the phone’s
menus.
Limit Calls Out.
2. Select Yes, to Contacts.
Clearing personal information
To clear all personal information from your phone,
you can erase all contacts from the Contacts
directory and/or erase the Recent Calls list.
1. Select Menu → Settings → Security →
Lock Phone.
34
Custom izing Your Phone
Erasing all contacts
1. Select Menu → Settings → Security →
Erase All Contacts.
–
Vibe & remind—sets the phone to vibrate
once when a new message is first received,
and once every five minutes. To stop the
reminder, press
to select Ignore.
2. Select Yes to erase all contacts. A message
appears: “Erase ALL contacts?”
–
–
Soft beep once—sets the phone to beep
once softly when a message is received.
3. Select Yes to erase all contacts.
Soft beeps—sets the phone to beep softly
approximately every five minutes. To stop
Erasing the recent calls list
1. Select Menu → Settings → Security →
Erase Recent Calls.
this reminder, press
to select Ignore.
–
–
Loud beep once—sets the phone to beep
once loudly when a message is received.
2. Select Yes to erase all recent calls. A message
appears: “Erase Calls?”
Loud beeps—sets the phone to beep loudly
approximately every five minutes. To stop
3. Select Yes to erase all recent calls.
this reminder, press
to select Ignore.
Setting message alerts
You can choose how you want be alerted of
incoming voicemail, pages, or text messages.
Setting the headset to ring
You can set the phone to ring or alert you from a
headset (sold separately).
1. Select Menu → Settings → Messaging → the
type of alert (Voicemail Alert, Page Alert,
Message Alert, or Net Alerts).
1. Select Menu → Settings → Accessories →
Headset Ringing.
2. Press
to select an option:
2. Select Out of headset to set the phone to ring or
–
Disabled—does not alert you when a
alert you from the headset.
message is received.
–
Vibrate once—sets the phone to vibrate
once when a new message is received.
User Guide for the Kyocera 5135 Phone
35
Setting the phone line
Connecting to a TTY/TDD
device
You can connect your phone to a TTY device for the
hearing impaired if your service provider supports
the service.
If you have two phone numbers set in your phone
(for example, if you have service in two different
countries), contact your service provider for
assistance.
Note: Not all service providers support this feature.
Note: This phone requires an adapter with a
2.5 mm jack to connect to a TTY adapter.
Connecting to a laptop or a PC
The Com Port speed sets the data rate at which your
phone connects to a laptop or PC.
1. Connect the TTY device to the phone first.
2. Select Menu → Settings → Accessories→
TTY Device.
1. Select Menu → Settings → Accessories →
3. Select Enabled.
Com Port Speed.
Note: Set this option to Disabled when the phone is
not being used with a TTY device.
2. Select the speed. The options are: 19.2 kbps,
115.2 kbps (default), and Other.
Note: The Other option cannot be selected
manually.
36
Custom izing Your Phone
6
CONNECTING TO THE INTERNET
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
When you are connected to the Web Browser,
your home page has a list of bookmarks, and a
number of web menu options on the bottom of
the screen.
Note: You cannot receive incoming calls while you
are using the Web Browser.
4. You are now ready to use the Internet.
– A appears in a secure session.
– An underline and an arrow indicate that
Starting the Web Browser
there is more text. Press
down to view
1. Select Menu → Web Browser.
A message informs you that airtime fees apply
for browser use. For more information about
how airtime is charged, contact your service
provider.
more text. Press
previous screen.
to return to the
– For information on the menu options at the
bottom of the screen, see “Using the Web
menu options” on page 38.
Note: If you wish to cancel this message
prompt, see “Changing the browser prompt” on
page 39.
– For help searching for a web site, see
“Searching for a Web site” on page 38.
5. When you have finished using the Internet,
2. Press
to continue.
press
to exit the browser.
If this is the first time you have connected to the
Internet, a message informs you that security is
not yet enabled for your Web Browser.
3. Press
to select Yes to enable security.
User Guide for the Kyocera 5135 Phone
37
3. From your Web home page, press
right to
Changing the browser prompt
You can choose to receive a confirmation prompt
whenever you start or exit the Web Browser.
highlight Bookmarks.
A list of bookmarks appears.
4. Enter the number corresponding to the
1. Select Menu → Settings → Extras →
bookmark you want and press
.
Browser Prompt.
2. Press
to select an option:
Checking use amounts
Your phone has a timer that counts the number and
total duration of Web calls you have made since the
last time you reset the timer.
–
At Start confirms that airtime fees will be
applied when you use the browser.
–
–
At End verifies you want to exit the browser.
Both prompts you when you start the
•
Select Menu → Settings →
browser and exit the browser.
Call Information → Browser Timer.
–
No Prompts does not use any prompts.
•
Select Reset to reset the timer to zero.
Note: A single browser session may consist of
several browser calls.
User Guide for the Kyocera 5135 Phone
39
7
USING TOOLS AND PLAYING THE GAME
The Tools menu offers a variety of helpful items and
Tip Calculator
The Tip Calculator helps you calculate how much
tip to include on a bill.
™
a game, Brick Attack
.
Alarm Clock
Use the Alarm Clock to set an alert for a specific
time. The alert occurs only if the phone is on.
1. Select Menu → Tools → Tip Calculator.
2. Enter the amount of your bill and press
.
3. Select the amount you want to include as a tip
(15%, 18%, 20%, 10%, 5%, Other) and press
. Your total bill appears, including tip.
1. Select Menu → Tools → Alarm Clock → Set.
– Press
and minutes.
– Press
up or down to select an hour
4. If you want to split the bill, press
and press to select Split.
right
left or right to switch between
hours, minutes, and a.m./p.m.
5. Enter the number of guests and press
.
– Enter numbers using the phone keypad.
The amount each guest pays appears.
2. Press
to save.
3. When the alarm rings, select Snooze to silence
the alarm for 10 minutes, or select Off to turn
off the alarm.
40
Using Tools and Playing the Gam e
Calculator
Countdown
Use the calculator for basic mathematical
equations.
This timer counts down for a specified amount of
time. It beeps when that amount of time has
elapsed.
1. Select Menu → Tools → Calculator.
1. Select Menu → Tools → Countdown.
2. Use the keypad to enter numbers.
2. Press
to select Set.
3. Press
to select mathematical operations.
3. Press
up or down to set the hours,
=
÷
equal
divide
+
-
add
x
.
multiply
minutes, and seconds. To move the cursor,
press left or right.
subtract
decimal point
C
Clear all numbers entered and display a zero.
4. Select Start to begin the countdown.
MR Display the value currently stored in memory.
Select Stop to pause the countdown.
M+ Add the displayed digit to the value stored in
5. When the alarm rings, press
to silence it.
memory.
Stopwatch
MC Clear the value currently stored in memory.
±
Change the sign of the displayed number.
1. Select Menu → Tools → Stopwatch.
Clear one function or one digit from the
screen and return the calculator to digit entry
mode. Hold down to clear all of the digits and
operations and display a zero.
2. Select Start to have the stopwatch begin
counting.
3. Select Stop to stop counting.
4. Select Reset to set the counter back to zero and
Exit the calculator and return to home screen.
begin counting again.
5. Press
when finished.
User Guide for the Kyocera 5135 Phone
41
Brick Attack™
The goal of this game is to eliminate bricks
arranged in levels. To do this, you send a moving
ball upward using a paddle at the bottom of the
screen.
1. Select Menu → Tools → Brick Attack.
2. Press
to select New.
– To pause the game, press
, then press
left or
to Resume.
– To move the paddle, press
right.
3. To exit the game, highlight Exit and press
.
If an incoming call alert is received as you play, the
game is paused and exited. You can return to play
once the incoming call alert is ended. The game
will not remain paused while the phone is off.
42
Using Tools and Playing the Gam e
8
GETTING HELP
•
•
The name of your service provider.
Customer support
Your service provider’s customer support
The actual error message or problem you are
experiencing.
department may be accessible directly from your
phone when you dial a number such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available to
you, such as call forwarding or voicemail.
•
•
The steps you took to reproduce the problem.
The phone’s electronic serial number (ESN).
To find the ESN:
a. Remove the battery.
b. Locate the white label on the back of the
phone. Your phone’s 11-digit ESN begins
with “D” and is located under the bar code
on the label.
For questions about the phone features, refer to the
materials provided with your phone, or visit
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
Phone accessories
To shop for phone accessories, visit
www.kyocera-wireless.com/store, or call
(800) 349-4188 (U.S.A. only) or (858) 882-1410.
•
•
•
Email: phone-help@kyocera-wireless.com
Become a product evaluator
Phone: (800) 349-4478 (U.S.A. and Canada
only) or (858) 882-1401.
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including cellular
or PCS phones, visit beta.kyocera-wireless.com.
Before requesting support, please try to reproduce
and isolate the problem. When you contact the
Customer Care Center, be ready to provide the
following information:
User Guide for the Kyocera 5135 Phone
43
INDEX
Numerics
1-Touch dialing, 11
911 calls, 16
C
enhanced CDMA voice privacy, 5
erasing
Calculator, 41
callback number
all contacts, 35
messages, 27
recent calls list, 35
single contact entries, 18
including in messages, 24
A
CDMA, enhanced voice privacy, 5
characters
Spanish or French, 22
Com Port speed, 36
contacts
Alarm Clock, 5, 40
alerts
F
for headsets, 35
for messages, 35
for missed calls, 9
all calls timer, 13
Auto-Answer, 8
auto-hyphenation, 33
Fast Find, 19
business, 17
H
calling, 18
hard pause, 18
classifying, 17
I
editing, 18
erasing, 18
icons, 5
B
finding, 18
backlighting, 32
banner, 32
battery
L
personal, 17
languages, 22
Contacts directory, 17
Countdown Timer, 41
letters
charging, 1
accented characters, 22
entering, 21
icon, 1, 5
D
installing, 1
limiting calls out, 34
lock code, 34
locking phone, 34
data/fax setup, 14
delivery receipt
for text messages, 23
digital mode, 5, 14
display contrast, 33
safety guidelines, 2
bookmarks, 38
Brick Attack, 42
browser prompt, 39
browser timer, 39
M
menu view, 32
Menus, using, 7
messages
E
emergency calls (911), 16
44
Index
erasing, 27
choosing types, 29
for different calls, 30
importing, 30
timed pause, 18
timers
pre-written, 24
retrieving, 27
browser, 39
troubleshooting, 25
silencing, 6
recent calls, 14
Tip Calculator, 40
TTY/TDD device, 36
missed call alerts, 9
volume, 30
roaming, 5, 15
N
S
normal text mode, 21
number mode, 21
number type, 17
U
screen icons, 5
secret contacts, 10, 17
security, 34
unlocking the phone, 34
V
P
shortcuts
vibrate mode, 29
voice privacy, enhanced CDMA, 5
voicemail
accessing, 6, 12
setting up, 6, 12
volume
pauses in phone numbers, 18
phone book
accessing, 31
creating, 31
see Contacts directory
phone book (Contacts directory),
17
silencing all sounds, 6, 29
Smart Sound, 30
sounds, 34
special characters, 22
Speed, 17
speed dialing, 11
Stopwatch, 41
symbol mode, 21
phone number
adjusting during a call, 13
automatic adjustment, 30
earpiece, 30
type of, 17
verifying your own, 6
phone unlocking, 34
power backlighting, 33
power save mode, 8
priority of messages, 23
key beep, 30
ringer, 30
Smart Sound, 30
T
Text InBox, 27
W
R
text modes
Web Browser, 37
Web security, 37
rapid text mode, 21
recent calls timer, 14
redialing a number, 8
resetting the phone, v
ringers
changing, 22
understanding, 21
Text OutBox, 26
text, entering, 20
time/date format, 32
User Guide for the Kyocera 5135 Phone
45
|