MINI STEREO MP3 CD / CD PLAYER
Instruction Manual
JX-CD2100
Please read this manual carefully before operating and save it for future reference.
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
USER SAFETY GIUDE
INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at the end of its
life cycle; bring it to a collection point for the recycling of electrical and electronic
appliances. This symbol on the product means the instructions for use or the
packing will inform about the methods for disposal. The materials are recyclable
as mentioned in its marking. By recycling, material recycling, or other forms of
re-utilization of old appliances, you make an important contribution to protect the environment.
Please inquire at your local community administration for the authorized disposal location.
IMPORTANT SAFETY PRECAUTIONS
1. READ INSTRUCTIONS - All safety and operating instructions should be read before the
appliance is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained in a
secure place for future reference.
3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should
be observed.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. WATER AND MOISTURE - The appliance should not be used near water. For example:
near a bathtub, kitchen sink, laundry tub, and swimming pool or even in a wet basement.
6. VENTILATION - The appliance should be situated so that its location and position does not
interfere with its proper ventilation. For example, the appliance should not be situated on a
bed, sofa, rug or similar surface that may block the ventilation openings; or, be placed in a
built-in installation, such as a bookcase or cabinet that may impede the flow of air through the
ventilation openings.
7. HEAT - The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
8. POWER SOURCES - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
9. GROUNDING AND POLARIZATION - Precautions should be taken to ensure that the
grounding or polarization of the appliance is correct.
10. POWER CORD PROTECTION - Power supply cords should be routed so that they are not
likely to be walked on or obstructed by items placed upon or against them. Pay particular
attention to cords at plugs, convenience receptacles, and the point at which they exit from
the appliance.
11. CLEANING - The appliance should be cleaned only as recommended by the manufacturer.
12. POWER LINES - An outdoor antenna should be located away from power lines.
13. NONUSE PERIODS - The power cord of the appliance should be unplugged from the outlet
when the appliance is to be left unused for an extended period of time.
- 2 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
USER SAFETY GIUDE
IMPORTANT SAFETY PRECAUTIONS – CONTINUED
14. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids
are not spilled into the device’s openings.
15. CARTS AND STANDS - The appliance should be used only with a cart or
stand that is recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
16. WALL OR CEILING MOUNTING - If the appliance is mounted to a wall or ceiling, it
should be mounted only as recommended by the manufacturer.
17. DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service
professional when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the appliance’s apertures.
c. The appliance has been exposed to rain.
d. The appliance has been dropped and suffered damage.
e. The appliance does not appear to operate normally or exhibits a marked change
in performance.
18. SERVICING - The user should not attempt to service the appliance beyond that described
in the user's operating instructions. All other servicing should be referred to qualified
service professional.
19. PROTECTIVE ATTACHMENT PLUG - The appliance is equipped with an attachment
plug that has an overload protection. This is a safety feature. If replacement of the plug is
required, be sure the service technician has used a replacement plug specified by the
manufacturer that has the same overload protection as the original plug. (UK Version
Only)
FCC NOTICE (USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC regulations state that any change or modification to the equipment, not expressly
approved by maker or its authorized parties, could void user’s authority to operate this
equipment.
•
•
To prevent fire or electric shock, do not expose the unit to rain or moisture.
Never attempt to open the cabinet. Dangerous high voltages are present in the unit.
Always refer servicing to a qualified technician.
IC NOTICE (CANADA)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the Radio Interference Regulations of Industry Canada.
- 3 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
TABLE OF CONTENTS
1. Getting Started
a. Introduction ………………………………………………………………………
5
6
7
7
8
8
8
8
8
b. Location of Controls (top, speaker, right, left) ……………………………….
c. Location of Controls (Back Panel) …..………………………………………..
d. Location of Controls (Remote) ………………………………...………………
e. Connecting the Speakers ………………………………………………………
f.
AC Operation ……………………………………………………………………
g. Antennas …………………………………………………………………………
h. Listening with Stereo Headphones ……………………………………………
i.
2. Operational Instructions
a. Loading a CD into the Player ……….………………………..……………....
Installing the Batteries in the Remote Control ……………………………….
9
b. Listening to CDs ………………………………………………………………...
c. Repeat Mode ……...………………………………………………….………..
d. Skip and Search Mode ………………….…………………………………….
9
10
10
e. Program Mode ………………………………………………………………….. 10
f. Listening to the Radio ………………………………………………………….. 11
g. FM Stereo Indicator …………………………………...……………………….. 11
h. Bass Boost ………………………………………………………………………
3. Maintenance & Specifications
11
a. Notes on CDs …………………………………………………………………..
b. Cleaning the lens ……………………………………………………………….
c. Cleaning the cabinet …………………………………………………………...
d. Troubleshooting…………………………………………………………………
e. Technical specifications ……………………………………………………….
12
12
12
13
14
- 4 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
GETTING STARTED
Thank you for purchasing the JX-CD2100. Unpack the unit and make sure to put aside all
accessories so they will not be lost. We recommend that you retain the original carton and
packaging materials for future use, should you transport or ship the unit in the future.
Mini Stereo MP3 CD / CD Player
•
•
•
•
•
•
•
20-track programmable memory
Bass boost system (BBS)
Skip and search function
Integrated AM / FM stereo radio
Liquid crystal display (LCD) with blue backlight
3.5mm Aux. in jack and stereo headphone jack
Playable media: CD / CD-R / CD-RW / MP3 CD
What’s included
•
•
•
•
Mini Audio System
Remote Control
Instruction Manual
Warranty Card
- 5 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
GETTING STARTED
Location of Controls
1. CD DOOR
13. CD PLAY / PAUSE (ꢀꢁ) BUTTON
2. FUNCTION SWITCH (AUX / CD / RADIO)
3. BAND SWITCH
4. LCD SCREEN
14. VOLUME CONTROL
15. STEREO HEADPHONE JACK
16. CD FOLDER BUTTON (ꢂDOWN/ꢀUP)
17. CD SKIP / SEARCH (ꢃ BACKWARD /
ꢄ FORWARD) BUTTON
18. LEFT SPEAKER
5. POWER (ON / OFF) BUTTON
6. BASS BOOST BUTTON
7. STANDBY LED INDICATOR
8. TUNING KNOB
19. RIGHT SPEAKER
20. AUX IN JACK
9. REMOTE SENSOR
21. FM ANTENNA
10. CD PROGRAM BUTTON
11. CD MODE BUTTON
12. CD STOP (ꢅ) BUTTON
22. SPEAKER TERMINAL (L / R)
23. AC POWER CORD
- 6 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
GETTING STARTED
Location of Controls (Remote Control)
1. INFRARED SENSOR
2. POWER BUTTON
3. PLAY/PAUSE
BUTTON
4. FOLDER DOWN
BUTTON
5. SKIP/SEARCH
DOWN BUTTON
6. MUTE BUTTON
7. VOLUME UP/DOWN
BUTTON
8. STOP BUTTON
9. FOLDER UP
BUTTON
1.
2.
3.
4.
8.
9.
5.
10.
6.
11.
10. SKIP/SEARCH UP
BUTTON
7.
11. MODE BUTTON
12. BATTERY DOOR
(REAR)
Note: For best results, point
the infrared transmitter on
the remote control directly at
the remote sensor on the
main unit.
12.
- 7 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
GETTING STARTED
Connecting the Speakers
Connect the SPEAKER cables to the SPEAKER
terminals in the rear of the unit properly.
AC Operation
Before operating this unit, make sure the voltage indicated on the JX-CD2100 matches the
voltage in the wall outlet.
1. Plug the AC POWER CORD into a standard AC wall outlet.
2. The STANDBY/MUTE INDICATOR will light.
3. Press the POWER button. The LCD DISPLAY will light and the STANDBY/
MUTE INDICATOR will go off.
Antennas
For best FM reception, fully extend the FM antenna. For AM reception, this unit has a built-in
antenna.
Listening with Stereo Headphones
For private listening, insert the 3.5mm plug of a stereo headphone set (not included) into the
STEREO HEADPHONE JACK on the left side panel of the
JX-CD2100. Volume on the headphones is controlled by
the VOLUME knob on the unit of the VOLUME -/+ button
on the remote control. When headphones are used, sound
on the external speakers cuts off.
Note: Be sure that your headphones have an impedance of 32ohms.
Installing Batteries in the Remote Control
1. Slide open the BATTERY
DOOR in the direction of the
arrow imprinted on the door
itself.
2. Install two (2) AA size batteries
according to the polarity (+/-)
marked inside the compartment
3. Close the BATTERY DOOR.
Note: Remote Control buttons correspond with the similarly labeled buttons on the main unit.
The recommended distance for remote operation is 16 feet or less.
- 8 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
OPERATIONAL INSTRUCTIONS
Listening to the Radio
1.
2.
3.
Slide the FUNCTION SWITCH to the RADIO position.
Slide the BAND SWITCH to the desired waveband (AM, FM or FM ST.).
Turn the TUNING KNOB to your desired radio station, radio frequency appears on the
LCD SCREEN.
4.
5.
Adjust the sound level by pressing the VOLUME CONTROL knob Up or Down.
To turn off the radio, press the POWER BUTTON once. The backlight of the LCD
SCREEN will go “off” while the STANDBY LED INDICATOR will light up.
FM Stereo Indicator
Slide the BAND SWITCH to FM ST. position, the FM
Stereo Indicator will light up when listening to a
strong station that is broadcasting in “Stereo”.
When the FM stereo reception is weak, slide the
BAND SWITCH to FM position, in the case this
reception will be monaural.
Bass Boost
To enhance the low frequency sound, slide the BASS
BOOST switch to the ON position. To release the
super bass, slide the BASS BOOST button to OFF.
Auxiliary (AUX) Mode
1.
2.
Slide the FUNCTION SWITCH to the AUX position.
Connect the earphone socket from the Auxiliary unit (e.g. MP3 player or MD player) into
AUX-IN JACK on the rear of this product via an Audio Line Cord (3.5mm plug on both
ends ; not supplied).
3.
Play the Auxiliary unit. Music from the Auxiliary unit can be listened through the speaker
of this product.
Playing a Compact Disc
Note: Should skipping of tracks occur during CD playing, try turning the volume down.
When CD is playing, DO NOT open the CD DOOR.
1.
Open the CD DOOR by pressing the right-bottom corner of the CD DOOR. Put a CD
disc into the CD Compartment and close the CD DOOR. Set the FUNCTION SWITCH to
“CD” position.
Note : Ensure the CD DOOR is closed properly and locked in place.
2.
When the CD DOOR is closed with a CD
inside, total number of the tracks in the disc
will be shown on the LCD SCREEN and will go
to stop mode. (ex. Total 17 tracks inside the
disc).
3.
If there is no disc inside, the LCD SCREEN
will show “
” and go to stop mode.
- 9 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
OPERATIONAL INSTRUCTIONS
Playing a Compact Disc-continued
4.
If the CD DOOR is not closed, the DISPLAY
will show “ ”.
PLAY/PAUSE MODE
1. When the PLAY/PAUSE BUTTON is pressed
during CD stop mode, the first track will be
played. The Play Indicator “ꢀ” will be shown on
the LCD SCREEN. The LCD SCREEN will
show the specific number of track being played.
2. For interruption while the CD is playing, press
the CD PLAY/PAUSE BUTTON once. The Play
Indicator “ꢀ” will blink continuously on the LCD
SCREEN.
3. Though the sound stops, the disc will continue to spin. To re-start playing, press the CD
PLAY/PAUSE BUTTON once again. The music will start from the exact position where it
was interrupted.
4. To stop the CD, press the CD STOP BUTTON once whether the CD is in Play or Pause
mode. The LCD SCREEN will show the total number of tracks of the disc again.
5. To turn off the unit, press the POWER BUTTON once.
SKIP AND SEARCH MODE
1.
During play or pause mode, when CD SKIP/SEARCH FORWARD ꢄ or BACKWARD
ꢃ BUTTON is pressed once, it will go to the next track or go back to the beginning of
the track.
2.
During play mode, when CD SKIP/SEARCH FORWARD ꢄ or BACKWARD ꢃ
BUTTON is pressed and held, it will search the track with audible high-speed forward or
backward playback.
REPEAT MODE
1. Repeat 1 :
When the MODE BUTTON is pressed once,
the “Repeat” Indicator will be shown on the
LCD SCREEN. This single track of music will
be repeated.
2. Repeat All:
When the MODE BUTTON is pressed twice,
the “Repeat All” Indicator will be shown on the
LCD SCREEN. The whole disc can be played
continuously.
- 10 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
OPERATIONAL INSTRUCTIONS
Playing a Compact Disc-continued
3.
To cancel the Repeat Function
Press the MODE BUTTON repeatedly until the Repeat Indicator disappears from the
LCD SCREEN.
RANDOM PLAY MODE
This feature allows the track on the disc to be played in
a random order.
1.
During the CD stop mode, press the MODE
BUTTON three times, the “
”
indicator will be shown on the LCD SCREEN.
Press the PLAY BUTTON once to start the playback.
2.
To cancel the random play function, press the MODE BUTTON again, “
”
Indicator will disappear from the LCD SCREEN.
PROGRAM MODE
1. During the CD stop mode, press the PROGRAM BUTTON once. The “PROGRAM”
Indicator and the number of Program to be
memorized starts from the first program
“
” will light up and blink continuously.
Press the CD SKIP/SEARCH FORWARD ꢄ
or BACKWARD ꢃ BUTTON to select your
desired musical track, the LCD SCREEN will
show the appropriate track number. Press the PROGRAM BUTTON to store this track in
memory.
2.
Repeat above procedure until all desired tracks have been programmed. A total of 20
tracks can be stored in memory.
Remarks :Whenever CD SKIP/SEARCH
FORWARD or BACKWARD BUTTON is
pressed, it will always show the last
programmed track first to recall your memory.
After complete programming, LCD SCREEN
will show “
” and flash continuously.
3.
4.
Press the CD PLAY/PAUSE BUTTON once
to start the program playback and the CD Play
Indicator “ꢀ” will light up.
To check the program you have stored after complete programming, press the
PROGRAM BUTTON once during CD play mode, then press the CD SKIP/SEARCH
FORWARD BUTTON step by step.
- 11 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
OPERATIONAL INSTRUCTIONS
Playing a Compact Disc-continued
5.
•
•
To cancel the programmed memory :
During the CD stop mode, press the CD STOP BUTTON once. OR
Open the CD DOOR during the CD stop mode.
•
The “PROGRAM” Indicator will disappear from the LCD SCREEN.
Playing an MP3 Disc
Note: Should skipping of tracks occur during MP3 Disc playing, try turning the volume down.
When MP3 disc is playing, DO NOT open the CD DOOR.
1.
Open the CD DOOR by pressing the right bottom corner of the CD DOOR. Put a MP3
disc into the CD compartment and close the CD DOOR. Set the FUNCTION SWITCH to
“CD” position.
Note : Ensure the CD DOOR is closed properly and locked in place.
When the CD DOOR is closed with a MP3 disc inside, total number of the tracks in the
disc will be shown on the LCD SCREEN and go to stop mode.
2.
3.
4.
If there is no disc inside, the DISPLAY will show “
If the CD DOOR is not closed, the DISPLAY will show “
” and go to stop mode.
”.
PLAY/PAUSE MODE
1.
When the PLAY/PAUSE BUTTON is pressed
during CD stop mode, the first track will be
played. The Play Indicator “ꢀ” will be lighted.
The “MP3” Indicator will be shown as well to
indicate MP3 Disc is being played. The LCD
SCREEN will show the specific track number being played.
2.
To select the specific musical tracks inside the MP3 Disc.
MP3 music can be stored into CD Disc with or without folders according to your “MP3
burning method”.
a. If the MP3 disc is downloaded without dividing into folder, all track number will be
shown directly in the LCD SCREEN. The Album number will only show
after
pressing the FOLDER UP or DOWN BUTTON.
- 12 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
OPERATIONAL INSTRUCTIONS
Playing an MP3 Disc-continued
b. If the music is stored into different folders, then you’ve to select the specific Album
number first by pressing the FOLDER UP or DOWN BUTTON ; afterwards press
the CD SKIP/SEARCH FORWARD or BACKWARD BUTTON to select the
specific Track number music inside this Album.
Example : To select Album # 4, track # 3.
STEP – 1 : Press the FOLDER UP or
DOWN BUTTON to select the
Album # 4.
STEP – 2 : Press the CD SKIP/SEARCH
FORWARD or BACKWARD
BUTTON to select the Track # 3
inside this Album # 4.
3.
4.
For interruption while MP3 disc is playing, press the CD PLAY/PAUSE BUTTON once.
The Play Indicator “ꢀ” will blink continuously on the LCD SCREEN.
Though the sound stops, the disc will continue to spin. To re-start playing, press the CD
PLAY/PAUSE BUTTON once again. The music will start from the exact position where it
was interrupted.
5.
6.
To stop the MP3 disc, press the CD STOP BUTTON once whether the MP3 disc is in
Play or Pause mode.
To turn off the unit, press the POWER BUTTON once.
REPEAT MODE
1.
Repeat 1 :
When the MODE BUTTON is pressed once,
the “REPEAT” Indicator will light. This single
track of music will be repeated.
2.
Repeat Folder :
When the MODE BUTTON is pressed twice,
the “REPEAT and ALBUM” indicators will be
shown. This specific folder will be played
repeatedly.
3.
4.
Repeat All :
When the REPEAT BUTTON is pressed three
times, the “REPEAT ALL” Indicator will be
shown. The whole disc can be played
continuously.
To cancel the Repeat Function
Press the MODE BUTTON repeatedly until the Repeat Indicator disappears from the
LCD SCREEN.
- 13 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
OPERATIONAL INSTRUCTIONS
Playing an MP3 Disc-continued
RANDOM PLAY MODE
This feature allows the tracks on the disc to be
played in a random order.
1.
During the CD Stop mode, press the MODE
BUTTON four times, the “
”
Indicator will show on the LCD DISPLAY.
Press the PLAY/PAUSE BUTTON once to start the playback.
2.
To cancel the Random Play function, press the MODE BUTTON again, “
”
Indicator will disappear from the LCD SCREEN.
SKIP AND SEARCH MODE
1.
During play or pause mode, when CD SKIP/SEARCH FORWARD ꢄ or BACKWARD ꢃ
BUTTON is pressed once, it will go to the next track or go back to the beginning of the
track.
2.
During play mode, when CD SKIP/SEARCH FORWARD ꢄ or BACKWARD ꢃ
BUTTON is pressed once and held, it will search the track with audible high speed
forward or backward playback.
PROGRAM MODE
1.
During the CD stop mode, press the PROGRAM BUTTON once. The “PROGRAM”
Indicator and the number of Program to be memorized starts from the first program
” will light up and blink continuously. Press the FOLDER UP or DOWN BUTTON,
“
then press CD SKIP/SEARCH FORWARD or BACKWARD BUTTON to select your
desired musical track, LCD SCREEN will show the track number of this specific Album to
be programmed. Press the PROGRAM BUTTON to store this track in memory.
Repeat above procedure until all desired tracks have been programmed.
Remarks : Whenever the FOLDER UP or DOWN BUTTON is pressed, it will always
show the last programmed Album number first to recall your memory.
2.
3.
A total of 20 tracks can be stored in memory. After complete programming, LCD
DISPLAY will show “
” and blink continuously.
To start the Programmed playback, press the CD PLAY/PAUSE BUTTON once and the
CD Play Indicator “ꢀ”, “PROGRAM”, “MP3” Indicator and the track number of the
specific Album will light up.
Example : Album # 3, Track # 2.
4.
5.
To check the program you have stored after complete programming,
press the CD SKIP/SEARCH FORWARD BUTTON step by step during CD program
play mode, track number of the Album will be shown. Press the FOLDER UP or DOWN
BUTTON to read the Album number.
To cancel the programmed memory :
•
•
During the CD stop mode, press the CD STOP BUTTON once. Or,
Open the CD Door during the CD stop mode.
The “PROGRAM” Indicator will disappear from the LCD SCREEN.
- 14 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
MAINTENANCE
Notes on CDs
1. Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out to the ends.
2. Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
3. Do not expose the CD to direct sunlight or heat sources such as hot air ducts. Do not
expose to direct sunlight, nor leave CDs in a car, as there can be a considerable rise in
temperature.
4. Do not stick paper or sticker on the CD. Do not scratch, dirt or fingerprints on the CD, for
it may cause tracking error.
Cleaning the lens
If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a
commercially available lens cleaner.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or
benzine.
- 15 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
TROUBLESHOOTING GUIDE
When the instructions in this manual are followed, this unit should function properly. However, if
any of the following difficulties occur and cannot be corrected by the user or if a problem arises
that is not mentioned here, please contact jWIN Customer Service or a qualified service
technician.
1. Unit Does Not Play
•
•
•
•
Unit may be disconnected from power source. Check connection.
Disc is not correctly set. CDs should be inserted label side up.
Disc is scratched or dirty. Please clean.
The lens is dirty. Wipe clean gently with soft, dry cloth. Follow the instructions of the
lens cleaner.
•
There is moisture on the lens wait an hour and try again.
2. No Sound, Distorted Sound or Feedback
•
•
•
•
Ensure plugs are inserted firmly.
Wipe off plugs with clean cloth.
Disc is scratched or dirty. Please clean.
Volume control is turned down. Please increase.
3. Sound from Only One Side (or inverted)
•
•
Speaker cords are not properly connected.
Input cords are not properly connected.
4. Radio Reception is Unclear
•
•
Radio station frequency may be weak. Adjust antenna.
If FM station, BAND switch may be set to FM ST. Slide BAND switch to FM.
- 16 -
Mini Portable Stereo Audio System
V10M10_IM_EN_12172007
SPECIFICATIONS
•
•
Audio Output: 2WRMS per channel
Total: 4WRMS / 8WRMS / 80WPMPO
Connectivity
o
o
o
Satellite speaker terminals (L / R)
3.5mm headphone jack
3.5mm stereo headphone jack
•
•
Power Requirement
o
o
JX-CD2100: AC 120V, 60Hz (USA, Canada)
Remote Control: 3V (2 x “AAA” batteries, not included)
Unit Dimensions (W x H x D)
o
o
Main Unit: Approx. 14.9” x 7.6” x 11.2” (378mm x 193mm x 284mm)
Satellite Speakers: Approx. 4.6” x 5.7” x 6.5” (117mm x 145mm x 165mm) per
speaker
•
Unit Weight
o
o
Main Unit: Approx. 5.68 lbs (2.6 kg)
Satellite speakers: Approx. 3.28 lbs (1.49 kg) per speaker
* Specifications and features are subject to change without prior notice.
- 17 -
TEL: 516-626-7188
FAX: 516-626-7105
© 2007 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product
enclosed herewith including design, shape and graphics, may be reproduced or transmitted in
any form without prior written consent of jWIN Electronics Corp. by any means, electronic or
mechanical, including photocopying, recording or use of an information storage and retrieval
system. Any unauthorized distribution or reproduction of this printed material or product, or any
portion thereof, will be prosecuted to the fullest possible extent of the law.
Printed in China
|