Jura Capresso IMPRESSA C5 User Manual
The IMPRESSA C5 Manual  
The “IMPRESSA C5 Manual” has been awarded the seal of  
approval by the independent German Technical Inspection  
Agency, TÜV SÜD, due to its easy-to-understand style, its  
thoroughness and coverage of safety aspects.  
Table of contents  
6
7
Adjusting the permanent cup size settings  
36  
37  
Adjusting the permanent settings in programming mode  
Programmable switch-off time ...............................................................................................................37  
Maintenance 39  
8
Maintenance tips....................................................................................................................................... 39  
Rinsing the machine................................................................................................................................. 40  
Changing the filter.................................................................................................................................... 40  
Cleaning the machine .............................................................................................................................. 41  
Descaling the machine ............................................................................................................................ 43  
Rinsing the Easy Cappuccino Frother ................................................................................................... 46  
Cleaning the Easy Cappuccino Frother ................................................................................................. 46  
Descaling the water tank......................................................................................................................... 48  
9
CLARIS plus filter cartridge – Water for perfect coffee  
49  
As fresh as from the spring ..................................................................................................................... 49  
Water – always pleasant and freshly filtered........................................................................................ 49  
Quality knows no compromises............................................................................................................. 50  
Water freshly filtered on the “just in time” principle.......................................................................... 50  
10 “The milk makes the difference”  
57  
Trendy specialities with milk....................................................................................................................57  
Frothing as done by a professional.........................................................................................................57  
11 Accessories and Service  
59  
69  
71  
12 Messages in the maintenance field and symbol display  
13 Troubleshooting  
14 Transport and environmentally neutral disposal  
72  
Empty system.............................................................................................................................................72  
Transport......................................................................................................................................................72  
Disposal........................................................................................................................................................72  
15 Technical data and guide values  
73  
Technical data.............................................................................................................................................73  
Basic settings in programming mode....................................................................................................73  
16 Key technologies and products  
17 JURA contact details  
Index  
74  
79  
84  
3
Control elements and accessories  
Control elements and accessories  
Power switch and cable (see rear side)  
1
Switch for setting fineness  
of grind  
17  
16  
2
3
15  
14  
13  
4
12  
11  
5
6
10  
9
7
Figure: IMPRESSA C5 platinum  
8
1
Filler funnel for pre-ground coffee  
Cup tray  
10  
11  
Cup platform  
2
3
4
JURA Auto-Cappuccino Cleaner  
Water tank with level indicator  
Overview of maintenance indicators  
12  
13  
14  
15  
16  
17  
Drawer with coffee grounds container  
Height-adjustable coffee spout  
Easy Cappuccino Frother with milk pipe  
Connector System© for removable nozzles  
Switch for water and milk preparation  
Bean container, aroma preservation cover  
5
6
7
CLARIS plus filter cartridge  
Hot water nozzle  
Measuring spoon for pre-ground coffee  
8
9
JURA cleaning tablets  
Drip tray  
4
Control elements and accessories  
1
2
3
4
5
6
7
8
Symbol display  
Maintenance field  
1
Symbol display  
5
6
7
8
Maintenance indicator  
2
3
4
Rotary Switch  
Light segments  
Symbols  
Access door  
Maintenance field  
Indicators  
1 Espresso  
Water tank  
a
s
d
f
g
h
j
k
y
x
c
v
b
n
2 Espressos  
1 coffee  
Coffee grounds container  
Bean container  
2 coffees  
Cleaning button  
Descaling button  
Filter button  
On/off  
Maintenance  
Pre-ground coffee  
Steam  
5
Important information  
Proper use  
The machine has been designed and built for private use in the  
home. It should only be used to prepare coffee and to heat milk and  
water. Use for any other purpose will be deemed improper. JURA  
cannot accept any responsibility for the consequences of improper  
use.  
For your safety  
Please read and note carefully the important safety information set  
out below, which is intended to ensure that any danger of electric  
shock is avoided.  
p
Never use a machine which has been damaged or with a  
defective power cable.  
p
For information on what to do in case of damage, for example  
if there is a smell of burning, unplug the machine immediately  
from the mains supply and contact the JURA service centre.  
If the power cable for this machine is damaged, it must be  
repaired either directly by JURA or by a JURA approved service  
centre.  
p
p
p
p
Make sure that the IMPRESSA and the power cable are not  
close to hot surfaces, for example, a gas or electric cooker.  
Be careful to ensure that the power cable does not get caught  
and does not rub against sharp edges.  
Never open and repair the machine yourself. Do not modify  
the machine in any way that is not described in the IMPRESSA  
Manual. The machine contains live parts. If opened, there is a  
danger of serious injury. Repairs may only be carried out by  
JURA approved service centres, using original spare parts and  
accessories.  
There is a risk of scalds or burns on the spouts or in the nozzle:  
p
p
p
Place the machine out of the reach of children.  
Do not touch any hot parts. Use the handles provided.  
Be careful to ensure that the appropriate nozzle is installed  
and clean. The nozzle or parts of the nozzle might come off if  
the parts are not assembled correctly or a blockage occurs.  
6
Important information  
A defective machine is not safe and could cause injury or fire. To  
avoid damage and any associated risk of injury or fire:  
p
Never allow the power cable to trail, as someone could trip  
over the power cable and/or it could get damaged.  
Protect your IMPRESSA from environmental influences such  
as rain, frost and direct sunlight.  
p
p
p
Do not put the IMPRESSA, cable or connections in water.  
Do not put the IMPRESSA or any individual parts in the dish-  
washer.  
p
Turn your IMPRESSA off at the power switch before starting  
any cleaning operation. Always wipe your IMPRESSA with a  
damp cloth rather than a wet one, and protect it from pro-  
longed water splash.  
p
p
p
Only connect the machine to a power supply in accordance  
with the technical data. (See rating plate and Chapter 15,  
“Technical data and guide values”)  
Use only original JURA care products. Use of accessories that  
are not explicitly recommended by JURA could damage the  
IMPRESSA.  
Do not use any coffee beans treated with additives or caramel-  
ised coffee beans.  
p
p
Always fill the water tank with cold, fresh mains water.  
If you will be absent for an extended period, turn the machine  
off and unplug.  
p
Keep this manual close to the IMPRESSA and, if appropriate,  
pass it on to the next user.  
7
The IMPRESSA C5 Manual  
The IMPRESSA C5 Manual  
You are holding the manual for your IMPRESSA C5 in your hand. The  
information contained in this manual will help you to familiarise  
yourself with your IMPRESSA safely and quickly and teach you the  
full range of facilities it offers.  
Chapter 2, “Preparing and using your IMPRESSA for the first time”,  
explains step-by-step how to set up and prepare the IMPRESSA.  
Chapter 3, “Familiarising yourself with the control options” is impor-  
tant for you to read as you are familiarising yourself with your  
IMPRESSA. It invites you to actively explore all the different coffee  
experiences that it offers.  
As coffee and coffee specialities are very important to JURA, we have  
compiled a selection of tasty suggestions for you in Chapter 4,  
“Recipes”.  
All the other chapters are intended to help you when you have a  
specific query.  
If you use the IMPRESSA C5 Manual, you will become a past master  
at preparing exciting coffee specialities, you will be a Barista!  
8
Model variants  
Model variants  
The IMPRESSA C5 Manual covers all C series IMPRESSA models.  
Warnings  
Symbol description  
Always take note of any informa-  
tion marked with the CAUTION or  
WARNING symbol. The WARNING  
symbol is used where there is a risk  
of injury. The CAUTION symbol is  
used where there is a risk of dam-  
age to property.  
CAUTION  
CAUTION  
The CAUTION symbol is used to  
draw attention to circumstances  
which could cause the machine to  
become damaged.  
Symbols used  
o
Information and tips to ease things  
for you as you use your IMPRESSA.  
References to the online JURA web-  
site, where you can find interesting  
further information:  
@
www.jura.com  
Prompt to take action.  
This symbol means that you are  
being prompted to perform some  
action.  
L
9
Welcome to the world of IMPRESSA!  
Welcome to the world of IMPRESSA!  
Dear customer,  
We thank you for the trust that you have placed in us by purchasing  
a JURA IMPRESSA coffee machine. The machines, which are pro-  
duced in Switzerland, have already impressed independent, critical  
testers of goods and design award juries. We will do everything we  
can to ensure that this genuine 2-cup Espresso and coffee fully  
automated machine continues to deliver perfect coffee specialities  
at the press of a button to your family and your guests for years to  
come.  
The IMPRESSA Manual will teach you everything you need to know  
on the subject of operating and tailoring your IMPRESSA to your  
particular preferences. Other subjects covered include how to solve  
the problem of scale build-up and important tips on care. Our pri-  
mary concern is to stimulate your imagination with attractive coffee  
recipes and to invite you to put the wealth of possibilities offered by  
the JURA fully automated machine to use on a daily basis.  
We wish you many stimulating and enjoyable moments with your  
IMPRESSA.  
Yours sincerely,  
Emanuel Probst  
General Manager  
10  
1 IMPRESSA C5 – Click & Drink  
1
IMPRESSA C5 – Click & Drink  
Coffee that fulfils your  
wildest dreams  
JURA‘s avowed mission is to develop superior machines which get  
the best out of every blend and roast of coffee. This it delivers  
through a unique, intelligent pre-brew system combined with lov-  
ing attention to detail.  
Click & Drink  
The IMPRESSA C5 demonstrates just how wonderful a perfect cup  
of coffee can taste and how easy it is to prepare one. Thus, the fur-  
ther development of the IMPRESSA compact series is setting new  
standards in coffee quality while at the same time maintaining a  
visually pleasing appearance from every angle. The smart control  
philosophy is especially to be admired. The various speciality coffees  
can be selected simply and intuitively using a single control  
element.  
p
Click & Drink  
Thanks to the revolutionary one-switch operation philosophy  
with the smart Rotary Switch, you are only a single touch of a  
button away from enjoying a perfect cup of coffee. To make  
your choice, all you have to do is to rotate the switch between  
coffee and Espresso, one or two cups. Just click the control and  
seconds later you can be enjoying your drink.  
p
p
Indicators  
The easy-to-understand indicators light up in a regal red, pro-  
viding the information that you need. Just one click of the  
Rotary Switch away, unobtrusively concealed, are the mainte-  
nance buttons with associated indicators.  
Height-adjustable coffee spout  
Whether you are after a small cup of Espresso or a large cup  
of breakfast coffee, the height-adjustable coffee spout, which  
can be raised and lowered between 65 and 111 mm, can be  
adjusted on a continuous scale to suit all sizes of cup. This pre-  
vents coffee splashing on the machine and is your guarantee  
of a rich, thick crema. The superior design and feel of the  
machine are also evident.  
11  
1 IMPRESSA C5 – Click & Drink  
p
Connector System©  
The Connector System© allows one to use the Easy Cappuc-  
cino Frother, which is fitted as standard, a hot water nozzle for  
an even jet of water and the optionally available 2-stage froth-  
ing nozzle or the Professional Cappuccino Frother for perfect  
milk foam or hot milk.  
Further information on this subject can be found in Chapter 11,  
“Accessories and Service”.  
JURA on the Internet  
Knowledge Builder  
Visit us on the Internet.  
@
At www.jura.com you will find interesting and up-to-date  
information on your IMPRESSA and on every aspect of the  
subject of coffee.  
You can familiarise yourself with your IMPRESSA C5 in a fun way on  
the PC.  
@
The Knowledge Builder awaits you at www.jura.com. The  
interactive assistant, LEO, will support you and explain the  
benefits of and how to use your IMPRESSA.  
12  
2 Preparing and using your IMPRESSA for the first time  
2 Preparing and using your IMPRESSA for the first time  
This chapter provides you with the information you need to use your  
IMPRESSA without any problems. You will prepare your IMPRESSA  
step-by-step for your first coffee experience using it.  
Supplied as standard  
The following items are supplied as standard:  
p
p
p
p
Your JURA IMPRESSA fully automatic coffee machine  
CLARIS plus filter cartridge  
JURA Auto-Cappuccino Cleaner  
The Welcome Pack, which includes:  
u The IMPRESSA C5 Manual  
u IMPRESSA C5 Quick Reference Guide  
u Milk pipe  
u JURA cleaning tablets  
u Measuring spoon for pre-ground coffee  
u Hot water nozzle  
u Aquadur® test strips  
u Overview of maintenance indicators, multi-lingual  
Keep the packaging for your IMPRESSA. It is used to protect the ma-  
chine during transportation.  
Setting up and  
connecting  
When setting up and connecting your IMPRESSA, please proceed as  
follows:  
p
Set the IMPRESSA down on a horizontal surface that is not  
sensitive to water.  
p
Choose a spot which is protected against overheating to set  
up your IMPRESSA.  
p
p
Never place the IMPRESSA on a hot surface, such as a hob.  
Check that the mains voltage agrees with the specification on  
the rating plate.  
p
Make sure that no one can trip over the power cable.  
13  
2 Preparing and using your IMPRESSA for the first time  
Filling the water tank  
To enjoy perfect coffee, we recommend that you change the water  
every day.  
o
Only use fresh, cold water to refill the water tank and never  
milk, mineral water or other liquids.  
l Open the cover of the water tank.  
l Remove the water tank and rinse it with cold water.  
l Fill the water tank with fresh, cold mains water and rein-  
sert.  
l Close the cover of the water tank.  
Filling the bean  
container  
The bean container has an aroma preservation cover. This will ensure  
that your coffee beans retain their aroma for longer.  
Coffee beans which have been treated with additives (e.g. sugar),  
either pre-ground or in the form of freeze-dried coffee, will damage  
the grinder.  
CAUTION  
l
Only use untreated coffee beans to refill the bean container.  
l Open the cover of the bean container and remove the aroma  
preservation cover.  
l Remove any dirt or foreign objects inside the bean con-  
tainer.  
l New machines contain an information sheet in the bean  
container. Remove this information sheet.  
l Fill the bean container with coffee beans, then close the  
aroma preservation cover and the bean container cover.  
14  
2 Preparing and using your IMPRESSA for the first time  
First-time use  
If the machine is operated with a defective power cable, there is a  
danger of electric shock.  
l
Never use a machine which has a defective power cable.  
WARNING  
Precondition: the water tank must be full.  
l Remove the protective film from the symbol display.  
l Insert the mains plug into a power socket.  
e l Switch on the IMPRESSA using the power switch on the back  
of the machine.  
The On/Off symbol G will light up to indicate that the  
machine is on standby.  
m l Press the Rotary Switch to switch the IMPRESSA on.  
The light segment by the switch will now flash.  
l Place a receptacle under the Easy Cappuccino Frother.  
r l Turn the switch in the anticlockwise direction.  
The light segment by the switch will now light up. The system  
will now be filled with water. A small amount of water will  
flow out of the Easy Cappuccino Frother.  
The operation stops automatically. The light segment by the  
switch will now flash.  
t l Turn the switch in the clockwise direction.  
As long as the machine is heating up, the Maintenance  
symbol h will flash. The Maintenance symbol h lights up.  
l Place a receptacle under the coffee spout.  
15  
2 Preparing and using your IMPRESSA for the first time  
m l Press the Rotary Switch.  
The machine will rinse itself, stopping automatically.  
The 1 Espresso symbol a will light up indicating that your  
IMPRESSA is ready to use.  
o
After the first time that a coffee speciality has been prepared,  
you may find that the maintenance indicator and the bean  
container c display flash if the grinder has not yet been filled  
with coffee beans. In that case, prepare a different coffee  
speciality.  
Using and activating  
filter  
Your IMPRESSA no longer has to be descaled if you are using CLARIS  
plus filter cartridges.  
o
Perform the “Using filter” operation without a break. This will  
ensure that your IMPRESSA always produces its best.  
@
You can also try out the “Using filter” operation online. Visit  
the Knowledge Builder on www.jura.com.  
Further information on CLARIS can be found in Chapter 9, “CLARIS  
plus filter cartridge – Water for perfect coffee”.  
l
Remove the packaging on the CLARIS plus filter cartridge.  
l Remove the water tank and empty it.  
l Lift the cartridge holder and insert the filter cartridge into  
the water tank, applying a light pressure.  
l Close the cartridge holder. It will lock into place audibly.  
l Fill the water tank with cold, fresh mains water and rein-  
sert.  
o
After two months, the filter will cease to work. Monitor the  
elapsed time as shown on the date plate on the cartridge  
holder.  
16  
2 Preparing and using your IMPRESSA for the first time  
Precondition: your IMPRESSA must be switched off (standby  
mode).  
l Open the access door.  
n l Hold down the Filter button until the Filter indicator n  
lights up.  
ä l Turn the Rotary Switch until the 3 light segments around the  
Rotary Switch light up.  
o
When the 3 light segments light up, the filter is activated. If  
none of the light segments light up, this means that the filter  
has not been activated.  
m l Press the Rotary Switch to confirm the setting.  
The light segment by the switch will now flash.  
l Place a receptacle (containing at least 500 ml) under the  
Easy Cappuccino Frother.  
l If the milk pipe is connected, remove it.  
r l Turn the switch in the anticlockwise direction.  
Rinsing of the filter will now begin. The light segment by the  
switch will light up.  
The water could be slightly discoloured. This is not harmful to health,  
nor does it affect the taste.  
Rinsing of the filter will automatically stop after approx.  
500 ml, and the light segment by the switch will then flash.  
t l Turn the switch in the clockwise direction.  
The IMPRESSA will switch itself off (into standby mode). The  
filter is now activated.  
17  
2 Preparing and using your IMPRESSA for the first time  
Assessing and setting  
water hardness  
The harder the water is, the more frequently the IMPRESSA needs to  
be descaled. It is therefore important to set the water hardness.  
o
o
However, if you are using the CLARIS plus filter cartridge and  
have activated the filter, you will not be able to adjust the  
water hardness.  
The water hardness is set to level 3 in the factory.  
The symbols in the symbol display show the configured degree of  
water hardness. The number of symbols corresponds to the relevant  
level.  
Level  
Water hardness  
Shown in display  
0
The water hardness is switched off, the automatic  
calcification indicator is switched off  
No symbol is illuminated  
1
German degree of water hardness 1 – 7° dH  
French degree of water hardness 1.79 – 12.53° f  
1 symbol is illuminated  
A
2
3
4
German degree of water hardness 8 – 15° dH  
French degree of water hardness 14.32 – 26.85° f  
2 symbols are illuminated  
A S  
3 symbols are illuminated  
A S D  
4 symbols are illuminated  
A S D F  
German degree of water hardness 16 – 23° dH  
French degree of water hardness 28.64 – 41.14° f  
German degree of water hardness 24 – 30° dH  
French degree of water hardness 42.96 – 53.7° f  
You can find out what the water hardness is, using the Aquadur®  
test strips enclosed in the Welcome Pack.  
l Hold the test strip briefly (for one second) under flowing  
mains water. Shake off the water.  
l Wait for about 1 minute.  
l You will then be able to read the degree of water hardness  
from the discoloration of the Aquadur® test strip and the  
description on the packaging.  
You can now configure the water hardness.  
18  
2 Preparing and using your IMPRESSA for the first time  
Example: to change the water hardness from level 3 to level 4,  
proceed as follows:  
Precondition: your IMPRESSA must be switched off (standby  
mode).  
l Open the access door.  
b l Hold down the Descaling button until the Descaling indi-  
cator b lights up.  
The Descaling indicator b and the symbols A S D will  
now light up.  
ä l Turn the Rotary Switch until the four symbols a s d f  
light up.  
m l Press the Rotary Switch to confirm the level 4 setting.  
The IMPRESSA will switch itself off (into standby mode). The  
water hardness is now set.  
Adjusting grinder  
CAUTION  
You can adjust the grinder to suit the roast of your coffee.  
If you adjust the fineness of grind when the grinder is not operating,  
the fineness of grind switch could be damaged.  
l
Only adjust the fineness of grind when the grinder is running.  
Our recommendations:  
Select a fine setting for a light roast.  
Select a coarse setting for a darker roast.  
p
p
Example: to change the fineness of grinding during preparation of  
a coffee, proceed as follows:  
l Open the cover of the bean container and remove the aroma  
preservation cover.  
l Place a cup under the coffee spout.  
ä l Turn the Rotary Switch to the 1 coffee setting D.  
19  
2 Preparing and using your IMPRESSA for the first time  
m l Press the Rotary Switch to initiate preparation of the coffee.  
The grinder will now start up, and the 1 coffee symbol D  
flashes  
.
l Turn the fineness of grind switch to the desired position  
while the grinder is running.  
The coffee will be prepared and the fineness of grind is set.  
Switching on  
When the IMPRESSA is switched on, a prompt to perform a rinse  
operation automatically appears.  
Precondition: your IMPRESSA is switched on at the power switch  
and the On/Off symbol g is illuminated (standby).  
m l Press the Rotary Switch to switch the IMPRESSA on.  
As long as the machine is heating up, the Maintenance  
symbol h will flash. The Maintenance symbol h lights up.  
l Place a receptacle under the coffee spout.  
m l Press the Rotary Switch to start the rinse operation.  
The coffee spout will be rinsed. The operation stops auto-  
matically and your IMPRESSA is now ready for use.  
Switching off  
(standby mode)  
When you switch off your IMPRESSA, the system is automatically  
rinsed.  
l Place a receptacle under the coffee spout.  
ä l Turn the Rotary Switch to the On/Off symbol g.  
m l Press the Rotary Switch to switch the IMPRESSA off.  
The system is rinsed and the Maintenance symbol H flashes.  
The operation stops automatically.  
The IMPRESSA is switched off (in standby mode), and the  
On/Off symbol G is illuminated.  
20  
3 Familiarising yourself with the control options  
3 Familiarising yourself with the control options  
With the IMPRESSA, you can prepare an excellent coffee speciality  
at the touch of a button. You also have the option of adjusting the  
coffee strength and amount of water to your personal taste while  
the coffee is brewing.  
This chapter will show you how to operate the machine with the aid  
of examples. To familiarise yourself with your IMPRESSA, we recom-  
mend that you make a point of actively trying the facilities described  
in this chapter. You will find this is well worthwhile.  
Learn how to perform the following:  
p
p
Preparing drinks at the touch of a button  
Adjusting the settings on a one-off basis while your drink is  
being prepared  
p
Adjusting the permanent cup size settings  
o
You can stop the machine at any time while a coffee speciality  
is being prepared. To do this press the Rotary Switch.  
@
If you prefer to familiarise yourself with your IMPRESSA in a fun  
way on the PC, the interactive Knowledge Builder tutorial pro-  
gram can be found on the Internet at www.jura.com  
.
Preparing drinks at the Prepare your favourite coffee speciality at the touch of a button.  
touch of a button  
All coffee specialities are prepared following this model at the touch  
of a button.  
o
Unless you change the permanent settings, all coffee speci-  
alities prepared at the touch of a button will have a coffee  
strength of mild.  
21  
3 Familiarising yourself with the control options  
Example: this is how to prepare an Espresso.  
l Place an Espresso cup under the coffee spout.  
ä l Turn the Rotary Switch to the 1 Espresso setting a.  
m l Press the Rotary Switch to initiate preparation of the  
Espresso.  
The 1 Espresso symbol a will now flash, and the pre-set  
amount of water wll flow into the cup.  
Drink preparation stops automatically.  
One-off setting during  
drink preparation  
You can change both the coffee strength and the amount of water  
while your drink is being prepared. These settings are not saved.  
One-off settings during coffee preparation always follow this  
model.  
o
During the grinding operation, the light segments above the  
Rotary Switch indicate the coffee strength. The coffee strength  
can be altered while 1 Espresso or 1 coffee is being prepared.  
The coffee strength options available are as follows:  
Coffee strength  
Mild  
Shown in symbol display  
1 light segment is illuminated  
2 light segments are illuminated  
3 light segments are illuminated  
Normal  
Strong  
o
During the brew operation, the light segments indicate the  
amount of water. At this stage of the operation, you can change  
the amount of water by turning the Rotary Switch.  
Example: this is how to prepare a strong coffee.  
l Place a cup under the coffee spout.  
ä l Turn the Rotary Switch to the 1 coffee setting d.  
22  
3 Familiarising yourself with the control options  
m l Press the Rotary Switch to initiate preparation of the coffee.  
The grinder starts up, the 1 coffee symbol dflashes, and one  
light segment above the Rotary Switch is illuminated.  
ä l While the grinder is running, turn the Rotary Switch in a  
clockwise direction until three light segments have lit up.  
The grinding operation stops, brewing begins and the pre-  
defined quantity of water flows into the cup.  
Drink preparation stops automatically.  
Adjusting the perma-  
nent cup size settings  
It is easy to adjust the amount of water for all coffee specialities to  
the cup size for good. As in the following example, adjust the amount  
of water once. Every time you prepare a drink in the future, this  
amount of water will be dispensed.  
Permanent adjustment of cup size works the same way for all coffee  
specialities.  
Example: to permanently adjust the amount of water for an  
Espresso, you should proceed as follows:  
l Place an Espresso cup under the coffee spout.  
ä l Turn the Rotary Switch to the 1 Espresso setting a.  
m l Keep the Rotary Switch pressed down until the light seg-  
ment flashes above the Rotary Switch.  
Coffee preparation will start and the Espresso will flow into  
the cup.  
m l Press the Rotary Switch again when enough Espresso has  
flown into the cup.  
Espresso preparation will now stop. Your IMPRESSA will  
remember the amount of water you have specified for an  
Espresso for good.  
o
You can alter these settings at any time by repeating the  
above procedure.  
23  
4 Recipes  
4 Recipes  
You can use your IMPRESSA to prepare not only coffee classics but also unusual specialities in your  
home. You can find additional coffee recipes online at www.jura.com.  
Further information on how to operate your IMPRESSA can be found in Chapter 3, “Familiarising  
yourself with the control options”.  
Cappuzino  
200 ml cold milk  
2 strong Espressos  
20 ml cinnamon syrup  
Ingredients  
(for two people)  
Powdered cinnamon for decoration purposes  
l
l
l
Divide the cinnamon syrup into Cappuccino cups.  
Place cup under Easy Cappuccino Frother and half fill with milk foam.  
Pour Espresso directly into the milk foam and scatter some cinnamon powder.  
Café Chocolat Blanc  
50 g white chocolate  
2 Espressos  
200 ml milk  
Ingredients  
(for two people)  
Grated white chocolate for decoration purposes  
l
l
l
l
Use the Easy Cappuccino Frother to froth some milk in two decorative glasses.  
Melt white chocolate in a bain marie.  
Prepare two Espressos, stir with the melted chocolate and pour into the milk foam.  
Shake some grated white chocolate over the drinks.  
24  
4 Recipes  
Winter’s dream coffee  
2 strong Espressos  
200 ml of hot cocoa  
1 pinch of gingerbread seasoning  
100 ml milk  
Ingredients  
(for two people)  
Sugar to suit personal taste  
1-2 gingerbread cakes for decoration  
l
l
l
l
Prepare 2 Espressos.  
Stir Espresso with cocoa and gingerbread seasoning and divide into two glasses.  
Froth the milk and add to the Espressos.  
Sprinkle with small pieces of gingerbread.  
Latte Macchiato Frio  
2 cold Espressos  
200 ml cold milk  
1 small cup crushed ice  
20 ml maple syrup  
Milk foam  
Ingredients  
(for two people)  
l
l
l
Prepare Espresso and leave to cool.  
Put cold milk, the maple syrup and crushed ice in a glass and mix.  
Add the cold Espresso.  
29  
5 Preparing drinks at the touch of a button  
5 Preparing drinks at the touch of a button  
This chapter will explain how to prepare coffee specialities, milk and  
hot water.  
Chapter 3, “Familiarising yourself with the control options”, will  
teach you how to adjust the settings to your personal preferences.  
Alternatively, you can use Chapter 6, “Adjusting the permanent cup  
size settings”.  
o
You can stop the machine at any time while a coffee speciality  
is being prepared. To do this press the Rotary Switch.  
@
You can also try out the preparation of coffee specialities  
online. Visit the Knowledge Builder on www.jura.com.  
Barista tips  
A “Barista” is someone who is a professional at preparing Espressos  
and coffee. In Italy this is a respected profession. The Barista knows  
every coffee speciality and is a master at preparing perfect drinks. In  
conjunction with your JURA IMPRESSA, you too can achieve perfect  
results.  
To do this, follow these Barista tips:  
p
Store your coffee in a dry place. Oxygen, light, heat and mois-  
ture will spoil the coffee.  
p
Use only fresh, cold mains water so that the coffee aroma can  
be at its best.  
p
p
To enjoy perfect coffee, please change the water every day.  
Set the grinder to your preferred roasting. The correct fineness  
of grind will ensure that the flavours are released in the  
optimal way.  
p
p
Heat your cup up in advance.  
Use a teaspoon for sugar and avoid sugar lumps to ensure  
that the crema or milk foam are not spoilt.  
Adjust the height-adjustable coffee spout to the height of  
your cup. This will ensure that you get a really good crema.  
p
30  
5 Preparing drinks at the touch of a button  
Espresso  
The classic coffee drink from Italy. There is a definite crema on the  
surface of the Espresso.  
Example: this is how to prepare an Espresso.  
l Place an Espresso cup under the coffee spout.  
ä l Turn the Rotary Switch to the 1 Espresso setting a.  
m l Press the Rotary Switch to initiate preparation of the  
Espresso.  
The 1 Espresso symbol a will now flash, and the pre-set  
amount of water will flow into the cup.  
Drink preparation stops automatically.  
To prepare two cups of Espresso, place two cups under the coffee  
spout and turn the Rotary Switch to the symbol for 2 Espressos s,  
then press the switch to initiate coffee preparation.  
Coffee  
Example: this is how to prepare a coffee.  
l Place a cup under the coffee spout.  
ä l Turn the Rotary Switch to the 1 coffee setting d.  
m l Press the Rotary Switch to initiate preparation of the coffee.  
The 1 coffee symbol dwill now flash, and the pre-set amount  
of water will flow into the cup.  
Drink preparation stops automatically.  
To prepare two cups of coffee, place two cups under the coffee spout  
and turn the Rotary Switch to the symbol for 2 coffees f, then press  
the switch to initiate coffee preparation.  
31  
5 Preparing drinks at the touch of a button  
Cappuccino  
A classic Italian recipe. The Cappuccino consists one-third of  
Espresso, hot milk and milk foam. It is finished with a sprinkling of  
cocoa powder.  
Precondition: your IMPRESSA is ready to use, the Easy Cappuccino  
Frother is mounted.  
l Take the milk pipe out of the Welcome Pack.  
l Take the protective cap off the Easy Cappuccino Frother.  
l Attach the milk pipe to the frother.  
l Insert the other end in a milk Tetrapack or connect it to a  
milk container.  
l Place a cup under the Easy Cappuccino Frother.  
ä l Turn the Rotary Switch so that it points to the Steam symbol  
k.  
m l Press the Rotary Switch to confirm your choice.  
The Steam symbol k will continue flashing until the  
IMPRESSA has warmed up. As soon as the required temper-  
ature has been reached, the light segment by the switch will  
flash.  
r l Turn the switch in the anticlockwise direction.  
The milk foam will be prepared.  
t l Turn the switch in the clockwise direction when there is suf-  
ficient milk foam in the cup.  
o
As long as the light segment continues to flash on the switch,  
you can continue preparing milk foam.  
l Move the cup under the coffee spout.  
ä l Turn the Rotary Switch to the 1 Espresso setting a.  
m l Press the Rotary Switch to initiate preparation of the  
Espresso.  
The 1 Espresso symbol a will now flash, and the pre-set  
amount of water will flow into the cup.  
Drink preparation stops automatically.  
32  
5 Preparing drinks at the touch of a button  
To ensure that the Easy Cappuccino Frother works perfectly, you  
should clean it regularly. For further information on cleaning, see  
Chapter 8, “Maintenance – cleaning the Easy Cappuccino Frother”.  
The high-quality milk containers available from JURA are a useful  
addition for all lovers of milk specialities. Further information on  
JURA accessories can be found in Chapter 11, “Accessories and  
Service”.  
Pre-ground coffee  
You can choose a second variety of coffee with the filler funnel for  
pre-ground coffee.  
All coffee specialities using pre-ground coffee are prepared in the  
same way.  
o
o
Never add more than two level measuring spoons of pre-  
ground coffee.  
Use pre-ground coffee which is not ground too finely. Very  
fine coffee can block up the system so that the coffee only  
comes out in drips.  
o
If you have added too little pre-ground coffee, the IMPRESSA  
will come to a halt ready for further use.  
Example: this is how to prepare a coffee using pre-ground coffee.  
l Take the measuring spoon for pre-ground coffee out of the  
Welcome Pack.  
ä l Turn the Rotary Switch so that it points to the pre-ground  
coffee symbol j.  
m l Press the Rotary Switch to confirm your choice.  
The pre-ground coffee symbol j will flash.  
l Place a cup under the coffee spout.  
33  
5 Preparing drinks at the touch of a button  
l Open the filler funnel for pre-ground coffee.  
l Place one level measuring spoon of pre-ground coffee in the  
filler funnel.  
ä l Turn the Rotary Switch to the 1 coffee setting d.  
m l Press the Rotary Switch to initiate preparation of the coffee.  
The symbols for pre-ground coffee j and 1 coffee d will  
flash, and the pre-configured amount of water will flow into  
the cup.  
Drink preparation stops automatically.  
To prepare two cups of pre-ground coffee, place two cups under the  
coffee spout, add two level measuring spoons of pre-ground coffee  
to the filler funnel, turn the Rotary Switch to the symbol for 2  
coffees f and then press to initiate preparation of the coffee.  
Milk foam  
Precondition: your IMPRESSA is ready to use, the Easy Cappuccino  
Frother is mounted.  
l Take the milk pipe out of the Welcome Pack.  
l Take the protective cap off the Easy Cappuccino Frother.  
l Attach the milk pipe to the frother.  
l Insert the other end in a milk Tetrapack or connect it to a  
milk container.  
l Place a cup under the Easy Cappuccino Frother.  
ä l Turn the Rotary Switch so that it points to the Steam  
symbol k.  
m l Press the Rotary Switch to confirm your choice.  
The Steam symbol k will continue flashing until the  
IMPRESSA has warmed up. As soon as the required temper-  
ature has been reached, the light segment by the switch will  
flash.  
34  
5 Preparing drinks at the touch of a button  
r l Turn the switch in the anticlockwise direction.  
The milk foam will be prepared.  
t l Turn the switch in the clockwise direction when there is  
sufficient milk foam in the cup.  
o
As long as the light segment continues to flash by the switch,  
you can continue preparing milk foam.  
To ensure that the Easy Cappuccino Frother works perfectly, you  
should clean it daily. Further information can be found in Chapter 8,  
“Maintenance – cleaning the Easy Cappuccino Frother”.  
Hot water  
To obtain a perfect water flow, attach the removable hot water  
nozzle.  
There is a danger of scalding from hot water splashes.  
l
Avoid direct contact with the skin.  
CAUTION  
Start by replacing the nozzle:  
l Carefully remove the Easy Cappuccino Frother from the  
Connector System©.  
l Take the hot water nozzle out of the Welcome Pack.  
l Insert this into the Connector System© with a light turning  
motion.  
l Place a cup under the hot water nozzle.  
Precondition: your IMPRESSA is ready for use.  
r l Turn the switch in the anticlockwise direction.  
The light segment on the switch will light up and hot water  
will flow into the cup.  
t l Turn the switch in the clockwise direction when there is  
sufficient water in the cup.  
35  
6 Adjusting the permanent cup size settings  
6 Adjusting the permanent cup size settings  
It is easy to adjust the amount of water for all coffee specialities to  
the cup size for good. As in the following example, adjust the amount  
of water once. Every time you prepare a drink in the future, this  
amount of water will be dispensed.  
Permanent adjustment of cup size works the same way for all coffee  
specialities.  
Example: to permanently adjust the amount of water for an  
Espresso, you should proceed as follows:  
l Place an Espresso cup under the coffee spout.  
ä l Turn the Rotary Switch to the 1 Espresso setting a.  
m l Keep the Rotary Switch pressed down until the light seg-  
ment flashes above the Rotary Switch.  
Coffee preparation will start and the Espresso will flow into  
the cup.  
m l Press the Rotary Switch again when enough Espresso has  
flown into the cup.  
Espresso preparation will now stop. Your IMPRESSA will  
remember the amount of water you have specified for an  
Espresso for good.  
o
You can alter these settings at any time by repeating the  
above procedure.  
36  
7 Adjusting the permanent settings in programming mode  
7 Adjusting the permanent settings in programming mode  
Programmable  
switch-off time  
By instructing your IMPRESSA to switch itself off, you can cut down  
your energy consumption.  
o
The permanent setting for programmable switch-off time is  
4 hours.  
The number of symbols illuminated indicates the programmable  
switch-off time that has been activated in hours:  
Switch-off time  
Shown in symbol display  
Meaning  
Not active  
No symbol is illuminated  
Switch-off time not  
programmed  
1 hour  
1 symbol is illuminated  
Switch-off after 1 hour  
Switch-off after 2 hours  
Switch-off after 4 hours  
Switch-off after 8 hours  
a
2 hours  
4 hours  
8 hours  
2 symbols are illuminated  
a s  
3 symbols are illuminated  
a s d  
4 symbols are illuminated  
a s d f  
Example: to amend the programmable switch-off time from 4 hours  
to 2, you should proceed as follows:  
Precondition: your IMPRESSA must be switched off (standby  
mode).  
l Open the access door.  
v l Hold down the Cleaning button until the Cleaning indicator  
v lights up.  
The IMPRESSA is in programming mode, the Cleaning indi-  
cator v and the symbols a s d are illuminated.  
37  
7 Adjusting the permanent settings in programming mode  
ä l Turn the Rotary Switch until the 2 symbols a s light up.  
m l Press the Rotary Switch to confirm the setting.  
The IMPRESSA will switch itself off (into standby mode).  
The programmable switch-off time is now configured at  
2 hours.  
38  
8 Maintenance  
8 Maintenance  
Your IMPRESSA has the following integrated maintenance pro-  
grams:  
p
p
p
p
Rinse the machine  
Change the filter  
Clean the machine  
Descale the machine  
The illuminated maintenance indicator draws your attention to the  
maintenance actions that are necessary. Open the access door and  
note the further indicators in the maintenance field. In the example  
shown on the left, your IMPRESSA is prompting you to clean it.  
o
Clean or descale the machine or change the filter whenever  
the appropriate indicator is lit up.  
Maintenance tips  
To ensure that you get many years' reliable service out of your  
IMPRESSA and to guarantee the optimum coffee quality, the  
machine requires daily maintenance.  
You should proceed as follows:  
p
Empty the coffee grounds container and the drip tray. Rinse  
them with warm water.  
p
p
Rinse the water tank with clean water.  
Dismantle and rinse the Easy Cappuccino Frother (see Chapter  
8, “Maintenance – rinsing the Easy Cappuccino Frother”).  
Wipe the surface of the machine with a damp cloth.  
p
39  
8 Maintenance  
Rinsing the machine  
o
o
Once the IMPRESSA has heated up following switch-on, the  
Maintenance symbol h will light up, prompting you to per-  
form a rinse operation. To initiate the rinse operation, press  
the Rotary Switch.  
When the IMPRESSA is switched off, a rinse operation is auto-  
matically performed.  
Precondition: the IMPRESSA is ready for use.  
l Place a receptacle under the coffee spout.  
ä l Turn the Rotary Switch so that it points to the Maintenance  
symbol h.  
m l Press the Rotary Switch to start the rinse operation.  
The rinse operation now starts and the Maintenance  
symbol h flashes.  
Rinsing stops automatically.  
Your IMPRESSA is ready for use.  
Changing the filter  
o
o
o
After 50 litres of water have been dispensed, the filter will  
cease to work. Your IMPRESSA will automatically prompt you  
to replace the filter.  
After two months, the filter will cease to work. Monitor the  
elapsed time as shown on the date plate on the cartridge  
holder.  
If the CLARIS plus filter cartridge is not activated, you will not  
be prompted to change the filter.  
Replacement following a  
prompt  
To change the CLARIS plus filter cartridge when prompted to do so  
by your IMPRESSA, you should proceed as follows:  
Precondition: the Maintenance indicator and the Filter indicator n  
are illuminated.  
l Remove the water tank and empty it.  
40  
8 Maintenance  
l Lift the cartridge holder.  
l Take out the old CLARIS plus filter cartridge.  
l Insert the new CLARIS plus filter cartridge into the water  
tank, pressing it lightly.  
l Close the cartridge holder.  
It will lock into place audibly.  
l Fill the water tank with cold, fresh mains water and  
reinsert.  
l Place a receptacle (containing at least 500 ml) under the  
Easy Cappuccino Frother.  
l If the milk pipe is connected, remove it.  
n l Hold down the Filter button until the Filter indicator n  
flashes.  
The light segment by the switch will now flash.  
r l Turn the switch in the anticlockwise direction.  
Rinsing of the filter will now begin. The light segment by the  
switch will now light up.  
The water could be slightly discoloured. This is not harmful to health,  
nor does it affect the taste.  
Rinsing of the filter will automatically stop after approx.  
500 ml, and the light segment by the switch will then flash.  
t l Turn the switch in the clockwise direction.  
The Maintenance symbol h flashes, the IMPRESSA heats up  
and is once again ready for use.  
Manual filter change  
You can initiate the “Changing the filter” operation manually. Start  
when the first prompt appears l, as described under “Replacement  
following a prompt”.  
After dispensing 200 cups of coffee or performing 80 switch-on  
rinses, the IMPRESSA will prompt you to clean it.  
Cleaning the machine  
CAUTION  
If the wrong cleaning agent is used, the machine could be damaged  
and/or traces of detergent could be left behind in the water.  
l
Use only original JURA care products.  
41  
8 Maintenance  
o
o
The cleaning program only lasts about 15 minutes.  
Do not interrupt the cleaning program, as this will impair the  
quality of cleaning.  
o
Your dealer will stock JURA cleaning tablets.  
@
Try out the “Cleaning the machine” operation online. Visit the  
Knowledge Builder on www.jura.com.  
Cleaning following  
a prompt  
To clean your IMPRESSA when prompted to do so, you should  
proceed as follows:  
Precondition: the Maintenance indicator and the Cleaning  
indicator v are illuminated.  
v l Hold down the Cleaning button until the Cleaning  
indicator v flashes.  
The coffee grounds container indicator x now flashes.  
l Empty the drip tray and the coffee grounds container.  
l Insert the empty drip tray and coffee grounds container  
back in the machine.  
The Cleaning indicator v will now light up.  
l Place a receptacle under the coffee spout.  
v l Press the Cleaning button.  
The Cleaning indicator v now flashes. Water flows out of  
the coffee spout.  
The process is interrupted. The pre-ground coffee symbol j  
flashes and the Cleaning indicator  
v
lights up.  
l Open the cover of the filler funnel for pre-ground coffee.  
l Insert a JURA cleaning tablet into the filler funnel.  
l Close the cover of the filler funnel.  
v l Press the Cleaning button.  
The Cleaning indicator v now flashes. Water flows out of  
the coffee spout once again.  
The operation stops, the coffee grounds container  
indicator x flashes.  
l Empty the drip tray and the coffee grounds container.  
42  
8 Maintenance  
l Insert the empty drip tray and coffee grounds container  
back in the machine.  
The cleaning operation is now complete. The Maintenance  
symbol h flashes, the IMPRESSA heats up and is once again  
ready for use.  
Manual cleaning  
You can initiate the “Cleaning the machine” operation manually.  
Start when the first prompt appears l, as described under “Cleaning  
following a prompt”.  
Descaling the machine The IMPRESSA builds up deposits of limescale over time and auto-  
matically prompts you to descale it when necessary. The degree of  
calcification depends on the degree of hardness of your water.  
If the descaling agent comes into contact with the skin or eyes, this  
can cause irritation.  
l
Avoid contact with the skin or eyes.  
CAUTION  
CAUTION  
CAUTION  
CAUTION  
l
Rinse the descaling agent off with clean water. Should you get  
any descaling agent in your eye, see a doctor.  
If the wrong descaling agent is used, the machine could be dam-  
aged and/or traces of detergent could be left behind in the water.  
l
Use only original JURA care products.  
If the descaling operation is interrupted, it is possible that the  
machine could be damaged.  
l
Allow the descaling program to run to the end.  
If the descaling agent comes into contact with sensitive surfaces, the  
possibility of damage cannot be excluded.  
l
Clean up any splashes immediately.  
o
o
The descaling program lasts approx. 40 minutes.  
Your dealer will stock JURA descaling tablets.  
@
Try out the “Descaling the machine” operation online. Visit  
the Knowledge Builder on www.jura.com.  
43  
8 Maintenance  
Descaling following  
a prompt  
To descale your IMPRESSA when prompted to do so, you should  
proceed as follows:  
Precondition: the maintenance indicator and the Descaling indi-  
cator b are lit up.  
b l Hold down the Descaling button until the Descaling indi-  
cator b flashes.  
The coffee grounds container indicator x now flashes.  
l Empty the drip tray and the coffee grounds container.  
l Insert the empty drip tray and coffee grounds container  
back in the machine.  
The Water Tank indicator y now flashes.  
l Remove the water tank and empty it.  
l Completely dissolve the contents of one blister (3 JURA des-  
caling tablets) in a container that holds 500 ml of water. This  
can take a few minutes.  
l Pour the solution into the empty water tank.  
l Insert the water tank.  
The light segment by the switch will now flash.  
l Remove the frother.  
l Place a container under the Connector System©.  
r l Turn the switch in the anticlockwise direction.  
This causes water to flow out of the Connector System©.  
The light segment by the switch lights up during the descal-  
ing operation.  
The operation stops automatically, and the light segment by  
the switch flashes.  
44  
8 Maintenance  
t l Turn the switch in the clockwise direction.  
The descaling operation will resume. After a few minutes,  
the coffee grounds container indicator x flashes.  
l Empty the container under the Connector System©.  
l Empty the drip tray and the coffee grounds container.  
l Insert the empty drip tray and coffee grounds container  
back in the machine.  
The Water Tank indicator y now flashes.  
l Rinse the water tank thoroughly and fill it with cold, fresh  
mains water.  
l Put the water tank back in.  
l Place a container under the Connector System©.  
The light segment by the switch will now flash.  
r l Turn the switch in the anticlockwise direction.  
This causes water to flow out of the Connector System©.  
The operation stops automatically, and the light segment by  
the switch flashes.  
t l Turn the switch in the clockwise direction.  
The descaling operation will resume. After a few minutes,  
the coffee grounds container indicator x flashes.  
l Empty the drip tray and the coffee grounds container.  
l Insert the empty drip tray and coffee grounds container  
back in the machine.  
l Put back the frother.  
The descaling operation is now complete. The Maintenance  
symbol h flashes, the IMPRESSA heats up and is once  
again ready for use.  
Manual descaling  
You can initiate the operation “Descaling the machine” manually.  
Start when the first prompt appears l, as described under “Descal-  
ing following a prompt”.  
o
If the descaling operation stops unexpectedly, rinse the water  
tank thoroughly.  
45  
8 Maintenance  
Rinsing the Easy  
To ensure that the Easy Cappuccino Frother works perfectly, you  
Cappuccino Frother  
should rinse it with water whenever you have prepared some milk.  
o
The IMPRESSA will not prompt you to rinse the Easy Cappuc-  
cino Frother.  
l Carefully remove the Easy Cappuccino Frother from the  
Connector System©.  
l Take the Easy Cappuccino Frother apart.  
l
Rinse all the frother parts thoroughly under running water.  
l Reassemble the Easy Cappuccino Frother and attach it to the  
Connector System©.  
Cleaning the Easy  
To ensure that the Easy Cappuccino Frother works perfectly, you  
Cappuccino Frother  
should clean it daily when you have been preparing milk.  
o
o
The IMPRESSA will not prompt you to clean the Easy Cappuc-  
cino Frother.  
Your dealer will stock the JURA Auto-Cappuccino Cleaner.  
If the wrong cleaning agent is used, the machine could be damaged  
and/or traces of detergent could be left behind in the water.  
CAUTION  
l
Use only original JURA care products.  
@
Try this operation out on the Internet. Visit the Knowledge  
Builder on www.jura.com.  
Precondition: your IMPRESSA is ready for use.  
l Place a receptacle under the Easy Cappuccino Frother.  
l Pour 250 ml of fresh water into a container and add one  
capful (max. 15 ml) of Auto-Cappuccino Cleaner.  
46  
8 Maintenance  
l Immerse the milk pipe in the receptacle.  
ä l Turn the Rotary Switch so that it points to the Steam  
symbol k.  
m l Press the Rotary Switch to confirm the action.  
The Steam symbol k will continue flashing until the  
IMPRESSA has warmed up.  
As soon as the required temperature has been reached, the  
light segment by the switch will flash.  
r l Turn the switch in the anticlockwise direction.  
The frother and pipe will be cleaned.  
t l Turn the switch in the clockwise direction as soon as the con-  
tainer holding the Auto-Cappuccino Cleaner is empty.  
The light segment by the switch will now flash.  
l Fill the receptacle with 250 ml of fresh water and immerse  
the milk pipe in it.  
o
Perform the next step as soon as the light segment by the  
switch is flashing. This means that the IMPRESSA has reached  
the temperature necessary for steam. If the light segment is  
no longer flashing, turn the Rotary Switch once again to the  
Steam symbol k and press the Rotary Switch. As soon as the  
required temperature has been reached, the light segment by  
the switch will flash again.  
r l Turn the switch in the anticlockwise direction.  
The frother and pipe are rinsed with fresh water.  
t l Turn the switch in the clockwise direction as soon as the con-  
tainer holding the water is empty.  
Cleaning of the Easy Cappuccino Frother is now complete  
and your IMPRESSA is ready to use again.  
47  
8 Maintenance  
Descaling  
the water tank  
The water tank may build up deposits of limescale. In order to  
ensure perfect working order, descale the water tank from time to  
time.  
l Remove the water tank.  
l If you use a CLARIS plus filter cartridge, remove this.  
l Descale the tank with a mild conventional descaling agent.  
l Rinse the water tank with clean water afterwards.  
l If you use a CLARIS plus filter cartridge, insert this again.  
l Fill the water tank with fresh water and insert it again.  
48  
9 CLARIS plus filter cartridge – Water for perfect coffee  
9 CLARIS plus filter cartridge – Water for perfect coffee  
As fresh as from the  
spring  
Anyone who has ever drunk fresh spring water knows: There is a  
world of difference between the elixir of life in its natural form and  
the processed fluid that comes out of our taps. Very few of us have  
ready access to a spring.  
The answer to this is: CLARIS plus filter cartridge from JURA. It trans-  
forms the hardness of the mains water into pH-neutral water. On top  
of this, CLARIS plus can protect your fully automated coffee/  
Espresso machine against scale, and used properly, can prolong the  
service life of your machine.  
Our mains water is of very high quality and is excellent for drinking.  
It is subject to ongoing health checks, meets strict, legally binding  
quality requirements and contains the most important minerals  
and fluorides.  
Water – always  
pleasant and freshly  
filtered  
Use of CLARIS plus filter cartridges guarantees you freshly filtered,  
delicious-tasting water for your tea and coffee at all times. Designed  
specially for JURA coffee machines, it has neutral pH and is placed  
directly in the water tank.  
This gives you three important benefits:  
p
p
p
The guarantee that your water is freshly filtered before any  
cup of coffee is prepared;  
Fresh water and unadulterated aromas guarantee your palate  
the coffee experience of a lifetime;  
Lifelong protection for your IMPRESSA (eliminating the need  
for descaling).  
CLARIS plus from JURA is hard on scale, but soft on your coffee  
machine.  
49  
9 CLARIS plus filter cartridge – Water for perfect coffee  
Quality knows no  
compromises  
You can see it at work on your household appliances every day. Left  
to its own devices, scale can cause serious damage. Over time, scale  
is deposited on the heating elements, clogging the heating ele-  
ments and pipes. Scale is also detrimental to the quality of your  
chosen drinks because, with the passage of time, the water will no  
longer be properly heated. Consequently: The result is that the  
coffee will taste weaker, Espresso will lose its strength and tea will  
taste bland. In other words: All enjoyment will be lost.  
Quality from A to Z  
No more descaling  
When you buy coffee, Espresso or tea specialities, aren‘t you careful  
to buy top quality? In that case, you should insist on the same for  
your water. You will taste and smell the difference the moment you  
start using the CLARIS plus filter cartridge. The water will taste purer  
and you will be thrilled by the flavour of your coffee specialities.  
If you use CLARIS plus filter cartridges regularly, you will be able to  
omit the time-consuming business of regular descaling. And your  
coffee machine will reward you with a longer service life. We recom-  
mend use of CLARIS plus wherever water is harder than 10° German  
hardness (dH). You can determine the water hardness before using  
your JURA coffee machine for the first time with the Aquadur® test  
strip included in the Welcome Pack.  
Interaction of organic  
materials  
The CLARIS plus filter cartridge was developed specially for JURA  
fully automatic coffee/Espresso machines. It contains a granulate  
consisting of ion exchangers and active carbon – in other words,  
pure, organic materials with no chemical additives. These agents  
work together to reduce the formation of calcium deposits, heavy  
metals and other harmful substances contained in mains water.  
Other substances detrimental to flavour and aroma, such as chlorine,  
are also largely eliminated. Minerals and fluorides contained in the  
water are, of course, retained.  
Water freshly filtered  
on the “just in time”  
principle  
Unlike other water filtering systems for domestic use, CLARIS plus  
works according to the professional up-flow principle. Practically  
speaking: Only the precise amount of water required for a given  
beverage is drawn in, and this is filtered directly before use.  
50  
9 CLARIS plus filter cartridge – Water for perfect coffee  
Up-flow principle  
The water flows through the filter at a constant speed, disturbing the  
granulate and ensuring that it is used evenly. This system ensures  
that the filter is used to optimum effect. The remaining water in the  
tank is left untouched until the next cup of coffee is made.  
Easy to operate  
Inserting the CLARIS plus filter cartridge couldn‘t be easier. It is de-  
scribed in Chapter 2, “Preparing and using for the first time – Using  
and activating filter”.  
Economical in use  
After 50 litres of water have been dispensed or after two months at  
the latest, the filter will cease to work. After this, the cartridge must  
be replaced. Your JURA coffee machine will prompt you to change  
the filter.  
This process is described in detail in Chapter 8, “Maintenance –  
changing the filter”.  
You can return used filter cartridges to the stockist. They are returned  
for recycling to protect the environment.  
Maintenance and storage  
The CLARIS plus filter cartridge only needs to be removed from the  
water tank if you are away for a lengthy period of time or if you wish  
to clean or descale the tank using a conventional product.  
If you do plan to be away for some time (e.g. for a holiday), we  
recommend that you do the following to store the filter cartridge.  
Remove the cartridge from the water tank. Place it in a glass with  
about two centimetres of water and put it in the fridge.  
We recommend that you run about half a litre of water through the  
machine before starting to make coffee again. The water could be  
discoloured, but this is not harmful to your health.  
51  
9 CLARIS plus filter cartridge – Water for perfect coffee  
Safe handling  
p
CLARIS plus filter cartridges should be kept out of the reach of  
children.  
p
p
p
p
Store them dry in the sealed package.  
Protect them from heat and direct sunlight.  
Do NOT use damaged CLARIS plus filter cartridges.  
Do NOT open CLARIS filter cartridges.  
Pictures on the next few pages:  
1
Water – always pleasant and freshly filtered.  
2
CLARIS plus filter cartridges do not require any accessories and do not  
take up any extra space. They can be inserted directly into the water tank.  
3
4
Water for perfect coffee specialities.  
5
The professional up-flow principle: Only the precise amount of water  
required for a given beverage is drawn in, and this is filtered directly before  
use.  
6
Stainless steel pipes in the heater element: With CLARIS plus (left) you  
can omit the time-consuming descaling operation (right).  
7
The following substances are filtered out through the interaction with  
organic materials: calcium (Ca), chlorine (Cl), lead (Pb), copper (Cu),  
aluminium (Al).  
52  
1
2
3
4
5
6
7
10 “The milk makes the difference”  
10 “The milk makes the difference”  
Coffee specialities are taking the entire planet by storm. Up until a  
few years ago, classics, such as Espresso and Café Crème were the  
most popular choices. Today, Cappuccino, Latte Macchiato & co.  
have well surpassed them.  
Trendy specialities  
with milk  
More and more often, one finds milk among the ingredients of the  
trendy specialities. It doesn‘t matter whether whole milk or skim  
milk is used. It isn‘t the fat content which is crucial for the wonderful  
foam, but the protein. Heated or frothed, as cream or whipped  
cream, no other natural product is combined with coffee as often or  
with as much pleasure as milk. There is a wide variety of alternatives  
available to allergy sufferers as well: goat/sheep milk, rice milk or soy  
milk.  
Most modern  
technology  
The most modern technology and ingenious Cappuccino nozzles  
allow you to delve into the multi-faceted world of coffee specialities  
with every IMPRESSA. Here, the milk is not heated to above 75 °C.  
This is namely the only way that the inimitable fine foam can be  
fully developed.  
Thanks to the variable brewing unit, which can prepare between 5  
and 16 grams of coffee powder under ideal conditions, you can make  
surethatthetastesofthecoffeeandmilkareharmoniouslybalanced.  
Simply allow your imagination to run free in creating new recipes  
and add flavour and fineness to your personal favourite coffee  
specialities according to your mood.  
Frothing as done by a  
professional  
Make sure you try out the secret Barista tip: Because milk can form  
a vortex on the rough surface of a stainless steel pot especially well,  
perfect foam can be formed in these receptacles. And the profes-  
sional also knows what must also be given special attention: Regu-  
larly and thoroughly clean the Cappuccino nozzle, rinse out the milk  
container well every evening and store the milk in the refrigerator  
overnight.  
57  
10 “The milk makes the difference”  
58  
11 Accessories and Service  
11 Accessories and Service  
1
Machine accessories –  
extend your coffee  
horizon  
Coffee specialities made with milk are very fashionable these  
days. The Connector System© and the wide range of accessories  
open the door to the world of trendy drinks. Any accessories that do  
not come supplied with your IMPRESSA can be obtained from  
authorised stockists.  
Professional Cappuccino  
Frother  
2
Cappuccino, Latte Macchiato at the touch of a button – nothing  
could be easier with the Professional Cappuccino Frother. It draws  
milk in directly from the container, heats it up, froths it and delivers  
perfect milk foam for the ultimate Cappuccino experience, or warm  
milk for your Latte Macchiato.  
Easy Cappuccino Frother  
3
The Easy Cappuccino Frother provides milk foam at the touch  
of a button. It is compatible with the Connector System©.  
When steam is drawn, a negative pressure is created and this draws  
milk from the container. Every Cappuccino is made successfully in  
this way.  
2-stage frothing nozzle  
Hot water nozzle  
4
The 2-stage frothing nozzle is suitable for heating and frothing  
drinks.  
5
6
The hot water nozzle provides an even jet of water.  
Stainless steel vacuum milk  
container  
The high-quality stainless steel vacuum milk container holds  
0.6 litres and keeps the milk cool throughout the day.  
Deluxe milk container  
7
In the attractive chrome steel design, the milk is suitably attired.  
The container holds 0.6 litres.  
59  
11 Accessories and Service  
8
Care products  
Original JURA care products are optimally tailored to the main-  
tenance programmes. You should therefore use only original JURA  
care products. Your IMPRESSA will thank you for it.  
9
The CLARIS plus filter cartridge was developed specially for JURA  
CLARIS plus filter  
cartridge  
coffee machines. It is placed directly into the water tank. CLARIS plus  
works according to the professional up-flow principle.  
Further information on this subject can be found in Chapter 9,  
“CLARIS plus filter cartridge – water for perfect coffee”.  
Cleaning tablets  
Descaling tablets  
Auto-Cappuccino Cleaner  
Service  
10  
Your IMPRESSA machine comes with an integrated cleaning  
programme. The original JURA cleaning tablets are specifically  
tailored for the machine and optimally dissolve accumulated coffee  
oils.  
11  
Scale is the biggest enemy of all household appliances that  
involve the use of mains water. JURA has developed a descaling  
tablet for the IMPRESSA which removes scale and at the same time  
is easy on your machine.  
12  
Clean your Professional Cappuccino Frother and Easy Cap-  
puccino Frother with the original Auto-Cappuccino Cleaner from  
JURA. This will ensure that it is 100% clean.  
13  
Competent, high-quality service is a top priority as far as JURA  
is concerned, irrespective of whether it is provided by the glassy  
service factory of the Swiss parent company or in the authorised  
JURA service centres all around the world.  
14  
Every IMPRESSA service is preceded by an electronically con-  
trolled diagnostic run.  
15  
Service work is performed competently and professionally by  
JURA‘s trained technicians.  
60  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
12 Messages in the maintenance field and symbol display  
12 Messages in the maintenance field and symbol display  
Message  
Cause  
Action  
l Open the access door and  
note the other indicators  
Maintenance indicator is  
illuminated or is flashing  
The IMPRESSA wants to tell  
you something  
l Fill the water tank  
Maintenance indicator and  
Water Tank indicator y are  
flashing  
Water tank is empty.  
You cannot prepare any  
coffee or hot water  
(See Chapter 2, “Preparing and  
using your IMPRESSA for the  
first time – filling the water  
tank”)  
l Empty the coffee grounds  
container and the drip tray  
Maintenance indicator and  
coffee grounds container  
indicator x are flashing  
Coffee grounds container is  
full.  
You cannot prepare any coffee  
but you can obtain hot water  
l Fill the bean container.  
The indicator will go out after  
you have prepared one coffee  
speciality  
Maintenance indicator and  
bean container indicator c  
are flashing  
Bean container is empty.  
You cannot prepare any  
coffee but you can obtain  
hot water  
(See Chapter 2, “Preparing and  
using your IMPRESSA for the  
first time – filling the bean  
container”)  
l Perform cleaning operation  
(See Chapter 8,  
Maintenance indicator  
and Cleaning indicator v  
light up  
The IMPRESSA will prompt you  
to clean it after 200 cups of  
coffee or 80 switch-on rinses  
“Maintenance – cleaning the  
machine”)  
l Perform descaling operation  
(See Chapter 8,  
Maintenance indicator  
The IMPRESSA is prompting  
you to descale it  
and Descaling indicator  
light up  
b
“Maintenance – descaling the  
machine”)  
l Change the CLARIS plus filter  
cartridge (See Chapter 8,  
“Maintenance – changing the  
filter”)  
Maintenance indicator  
and Filter indicator n  
light up  
The CLARIS plus filter cartridge  
is exhausted  
69  
12 Messages in the maintenance field and symbol display  
Message  
Cause  
Action  
l Wait a few minutes  
Maintenance indicator  
and Cleaning indicator v  
flash twice.  
System is too hot to clean  
l Wait a few minutes  
Maintenance indicator and  
Descaling indicator b flash  
twice  
System is too hot to descale  
Maintenance symbol h  
flashes twice  
l Wait a few minutes  
System is too hot for mainte-  
nance and switch-off rinses  
Maintenance indicator and  
all the indicators  
l Switch the IMPRESSA off  
completely by turning off the  
power switch e.  
If the problem persists when  
you turn the machine back on  
again, contact Customer  
Support in your country. You  
will find the telephone number  
in Chapter 17, “JURA contact  
details”  
There is a general fault  
y x c v b n behind  
the access door are flashing  
synchronously  
70  
13 Troubleshooting  
13 Troubleshooting  
Problem  
Cause  
Action  
l Contact Customer Support in your  
country  
Grinder is making a very  
loud noise  
There are some  
foreign bodies in the  
grinder  
(See Chapter 17, “JURA contact details”)  
l Insert the drawer correctly  
The coffee grounds  
Drawer with coffee  
grounds container has  
not been correctly  
inserted  
container indicator x is  
flashing continuously  
l Clean the Easy Cappuccino Frother  
(See Chapter 8, “Maintenance – cleaning  
the Easy Cappuccino Frother”)  
The frother does not  
produce enough milk  
foam  
Easy Cappuccino  
Frother is dirty  
l Put the grinder on a coarser setting or  
use coarser pre-ground coffee  
(See Chapter 2, “Preparing and using your  
IMPRESSA for the first time – adjusting  
grinder”)  
Coffee only comes out  
in drips  
Coffee or pre-ground  
coffee has been  
ground too fine and is  
blocking the sieve  
l Deactivate the CLARIS plus filter  
cartridge  
Water hardness cannot  
be adjusted  
CLARIS plus filter  
cartridge is activated  
(See Chapter 2, “Preparing and using your  
IMPRESSA for the first time – using and  
activating filter”)  
l Prepare a coffee speciality  
The maintenance indicator The machine will not  
lights up and the bean  
container indicator c  
be able to tell that the  
bean container has  
continues to flash although been filled until the  
it has been filled  
next time you make a  
coffee  
If you have not been able to solve the problem, contact Customer Support in your country.  
You will find the phone number in Chapter 17, “JURA contact details”.  
71  
14 Transport and environmentally neutral disposal  
14 Transport and environmentally neutral disposal  
Empty system  
To protect the IMPRESSA from damage caused by frost during trans-  
portation, the system needs to be emptied.  
Precondition: the IMPRESSA is ready for use.  
l Place a receptacle under the frother.  
ä l Turn the Rotary Switch so that it points to the Steam  
symbol k.  
m l Press the Rotary Switch to confirm your choice.  
The Steam symbol k will continue flashing until the ma-  
chine has warmed up. As soon as the required temperature  
has been reached, the light segment by the switch will  
flash.  
r l Turn the switch in the anticlockwise direction.  
Steam will now come out of the frother.  
l Remove the water tank and empty it.  
Steam will continue to flow out of the frother until the system  
is empty. The light segment by the switch will now flash.  
t l Turn the switch in the clockwise direction.  
o
The Maintenance indicator and the Water Tank indicator y  
both flash. Please ignore these indicators.  
m l Press the Rotary Switch to turn the machine off.  
e l Turn your IMPRESSA off at the power switch.  
o
The next time you use the machine, you will need to refill the  
system (see Chapter 2, “Preparing and using your IMPRESSA  
for the first time – first-time use”).  
Transport  
Disposal  
Keep the packaging for your IMPRESSA. It is used to protect the  
machine during transportation.  
Please dispose of old machines in an environmentally neutral way.  
Old machines contain valuable materials capable of being recycled  
which should be salvaged for recycling. Please therefore dispose of  
old machines via suitable collection systems.  
72  
15 Technical data and guide values  
15 Technical data and guide values  
Technical data  
Voltage  
220 to 240V AC, 50 Hz  
1450 W  
Power output  
Current  
6.6 to 6.0 A  
Safety test  
Pump pressure  
Holding capacity of water tank  
Static max. 15 bar  
1.9 litres  
Holding capacity of coffee grounds Approx. 16 portions  
container  
Cable length  
Approx. 1.1 m  
9 kg  
Weight  
Dimensions (W x H x D)  
28 x 34.5 x 41 cm  
Rating plate  
The rating plate is located on the bottom of your IMPRESSA. The  
information shown on this should be interpreted as follows:  
p
p
V AC = alternating current in volts  
W = power output in watts  
Meaning of symbols  
This product complies with all applicable EU directives.  
This product meets the requirements of the Decree concerning  
Low Voltage Electrical Products and the Decree concerning  
Electromagnetic Compatibility (VEMV). This product complies  
with all the pertinent ESTI requirements (Swiss Federal Inspec-  
torate for Heavy Current Installations)  
Basic settings in  
programming mode  
CLARIS plus filter cartridge  
Water hardness  
No  
Level 3  
Automatic switch-off time  
After 4 hours  
73  
16 Key technologies  
16 Key technologies and products  
Intelligent Pre Brew Aroma System (I.P.B.A.S.©).  
1
Perfect coffee is no accident. The Intelligent Pre Brew Aroma  
System© produces the very best in flavour from every coffee blend  
and roast.  
1a  
The freshly ground coffee beans are delivered to the infusing  
cylinder as a powder from the grinder.  
1b  
There it is optimally compressed.  
1c  
Prior to brewing, the powder is moistened. The pores swell and  
the flavours are released.  
1d  
During brewing, perfect coffee is delivered to the cup, crowned  
by a velvety, soft crema for perfect enjoyment.  
2
The IMPRESSA range of products includes the following series:  
p
IMPRESSA Z series, Cappuccino at the touch of a button, pre-  
mium professional technology for domestic use.  
IMPRESSA S series for demanding households  
IMPRESSA J series, Perfect Enjoyment, Perfect Aesthetics  
IMPRESSA F series, simple operation, multi-winner  
IMPRESSA C series, Click & Drink  
p
p
p
p
p
IMPRESSA X series for catering and office applications  
Obtain the advice of the JURA experts.  
@
You will find the purchase advisor at www.jura.com.  
3
For perfect coffee quality it is important to get the grinding  
right. To this end, a powerful 6-level powerful conical burr grinder  
with grinding cones constructed out of hardened steel is provided.  
4
The variable brewing unit holds between 5 and 16 g of coffee.  
This means that two cups can be prepared at once in a single brewing  
operation.  
5
Durable pipes constructed from a high-quality steel alloy con-  
duct the water through the thermoblocks where it is heated to the  
correct temperature.  
74  
1
1a  
1b  
1c  
1d  
2
IMPRESSA Z  
IMPRESSA S  
IMPRESSA J  
IMPRESSA F  
IMPRESSA C  
IMPRESSA X  
IMPRESSA XF  
3
4
5
17 JURA contact details  
17 JURA contact details  
A
D
Australia  
Denmark  
Global Coffee Solutions Pty Ltd  
Scandinavian CoffeeSystem ApS  
Customer Service  
JURA Australia Head Office and  
Service Centre  
Phone +61 1300 552 883  
Fax +61 0242 846 099  
E-Mail info@globalcoffee.com.au  
Customer Service  
Opening Hours  
E
Phone +45 7020 7333  
Fax +45 7020 7343  
E-Mail service@coffeesystem.com  
Mandag-Torsdag 09.00 - 16.30  
Fredag 09.00 - 16.00  
Opening Hours  
Monday to Friday 8am – 5pm  
Distributor Address/  
Service Address  
5/77 Jardine Street,  
Fairy Meadow NSW 2519  
Estonia  
OU Info Melton, Tallinn  
B
Customer Service  
Phone +372 651 8850  
Bangladesh  
E-Mail andres@lavazza.ee  
Please contact the Singapore office for details.  
Opening Hours  
E-R 09.00 - 17.00  
Distributor Address/  
Service Address  
Weizenbergi 27  
Tallinn 10150, Estland  
Brunei  
Please contact the East Malaysian office for details.  
F
Finland  
Burma  
Home Appliance Brokers HAB Oy  
Please contact the Singapore office for details.  
Customer Service  
Phone +358 207 300 090  
E-Mail info@haboy.fi  
C
Opening Hours  
Maanantai – Perjantai 08.00 – 16.00  
Distributor Address  
Home Appliance Brokers HAB Oy  
Elimäenkatu 29  
00510 Helsinki  
Cambodia  
Please contact the Singapore office for details.  
Service Address  
Monilaite-Thomeko Oy  
Salpakuja 6  
Czech Republic  
01200 Vantaa  
Petraco, Spol. S.R.O., Brno  
Customer Service  
JURA servis - Ing. P. Dokladal  
Phone +420 775 997 557  
E-Mail servis@juraswiss.cz  
G
Greece  
Opening Hours  
Po-Pá 09.00 – 17.00  
COFFEE CONNECTION A.B.E.E.  
Distributor Address/  
Service Address  
JURA - zákaznické centrum  
Kounicova 271/13, BRNO 602 00  
Customer Service  
Phone +30 210 66 40 640  
E-Mail coffeeway@coffeeway.com  
Opening Hours  
Monday to Friday 09:00 - 17:00  
Distributor Address/  
Service Address  
Agiou Louka str. Peania  
Attica 190 02, Greece  
79  
17 JURA contact details  
H
Israel  
Global Coffee Solutions Pty Ltd  
Hong Kong PRC  
Pacific Coffee Company Ltd  
Customer Service  
J.Feffer l.t.d., Israel  
Phone +972 353 350 38  
Fax +972 353 305 54  
E-Mail feffer-j@barak-online.net  
Customer Service  
Pacific Coffee Company Ltd  
Phone +852 2290 6011  
E-Mail sales@pacificcoffee.com  
Opening Hours  
Sunday–Thursday 8.00–18.00  
Friday 9.00–13.00  
Opening Hours  
Monday to Friday 9:00am – 6:00pm  
Saturday 9:00am – 1:00pm  
Distributor Address/  
Service Address  
9,Simtat Ma‘ale Hachoma  
Ind. Zone  
Or-Yehuda 60370, Israel  
Distributor Address  
701–704 Hollywood Center  
233 Hollywood Road  
Sheung Wan, Hong Kong  
Service Address  
204 Hollywood Center  
233 Hollywood Road  
K
Sheung Wan, Hong Kong  
Korea  
HLI Company Limited  
I
CustomerService  
Phone +82 234 522 127  
E-Mail wj_lee@hlikorea.com  
Iceland  
Karl K. Karlsson, Reykjavík  
Opening Hours  
Monday to Friday 9:00 – 18:00  
Customer Service  
Phone +354-540-9000  
E-Mail karlk@karlsson.is  
Distributor Address/  
Service Address  
7floor, Sungwon Bldg  
Yeoksam-Dong  
Kangnam-Ku  
Opening Hours  
virka daga 09.00 – 18.00  
Seoul, Korea  
Distributor Address/  
Service Address  
Skútuvogur 5  
104 Reykjavík, Island  
L
Lebanon  
Please contact the East Malaysian office for details.  
Indonesia Bali  
BHINEKA JAYA  
Customer Service  
Phone +62 361 724746  
Mobile Nr. +62 81 23817951 or  
+62 361 7460521  
M
E-Mail vivi@kopibali.com  
Malaysia, East  
RICMAS Borneo Sdn. Bhd.  
Opening Hours  
Monday to Saturday 08.30 – 16.30  
Customer Service  
Phone +60 88 456 100, –200  
Fax +60 88 241 600  
E-Mail ricmaskk@streamyx.com  
Distributor Address/  
Service Address  
Jl. Pulau Moyo 9A, Denpasar  
Bali, Indonesia  
Opening Hours  
Monday to Friday 09:00 – 17:30  
Service Number during off hours: +60  
16 830 60 83  
Indonesia Jakarta  
SUKSES PRATAMA JAYA P.T.  
Distributor Address/  
Service Address  
Unit # E3–8, 3rd Floor  
Block E, Plaza Tanjung Aru  
Jalan Mat Salleh, Tanjung Aru  
88150 Kota Kinabalu  
Customer Service  
Phone +62 21 6331177  
Fax +62 21 63857008  
E-Mail cs@suprajaya.com  
Opening Hours  
Monday to Saturday 09:00 – 17:00  
Sabah, Malaysia  
Distributor Address/  
Service Address  
Jalan: K.H. Hasyim Ashari 125  
Pusat Niaga Roxy Mas  
Blok C.4 No.14–15  
Jakarta 10150, Indonesia  
80  
17 JURA contact details  
S
Malaysia, West  
RICMAS Peninsular Sdn. Bhd.  
Singapore  
RICMAS INTERNATIONAL Pte. Ltd.  
Customer Service  
Phone +6 03 4296 5989  
Fax +6 03 4297 5636  
E-Mail ricmaskl@streamyx.com  
Customer Service  
Phone +65 6562 8853  
Fax +65 6562 8854  
E-Mail jura@ricmas.com  
Opening Hours  
Monday to Friday 09:00 – 17:30  
Service Number during off hours:  
016-201 5789  
Opening Hours  
Monday to Friday 09:00 – 17:30  
Service Number during off hours: +65  
90210314  
Office Address/ Service 3A-1 Jalan Perubatan 3  
Address  
Pandan Indah  
55100 Kuala Lumpur, Malaysia  
Office Address/ Service 25 International Business Park  
Address  
German Center #01–57/58  
Singapore 609916  
N
South Africa  
New Zealand  
International Coffee Equipment CC  
Euro Espresso Ltd, Auckland  
Customer Service  
Phone +27 11 708 2481  
Customer Service  
Phone +64 9 277 1334  
E-Mail info@icesa.za.net  
Fax +64 9 277 9375  
E-Mail info@euroespresso.co.nz  
Opening Hours  
Monday to Friday 08.00 – 17.00  
Saturday 08.00 – 13.00  
Opening Hours  
Monday to Friday 8.30am – 5pm  
Office Address/  
Service Address  
JURA Corner Building, 1st Floor  
475/3 Hans Strydom Drive  
KYA Sand  
Distributor Address/  
Service Address  
6 Mepal Place, Manukau City,  
Auckland  
PO Box 76–342, Manukau City,  
Auckland 1730  
T
Norway  
Thailand  
Black Cat Kaffe og Tehus AS, Oslo  
RICMAS (Thailand) Co., Ltd.  
Customer Service  
Phone + 47 22 06 29 90  
E-Mail  
info@blackcatkaffeogtehus.no  
Customer Service  
Phone +66 2262 0543  
Fax +66 2262 0542  
E-mail jura@ricmas-thailand.com  
Opening Hours  
Mandag – Fredag 08:30 – 16:30  
Opening Hours  
Monday to Friday 09.00 – 17.00  
Service Number during off hours:  
+66 1828 6996  
Distributor Address/  
Service Address  
Aslakveien 20h  
N– 0753 Oslo, Norge  
Office Address/ Service 55 Biohouse Building Sukhumvit 39 Rd.,  
Address  
Klongtan-nue, Wattana  
Bangkok 10110, Thailand  
P
Philippines  
Pacific Continental Company Inc.  
Turkey  
Customer Service  
Phone +63 2 551-3216  
John’s Coffee  
Fax +63 2 831-8314  
Customer Service  
Phone +90 216 420 2400  
E-Mail jura@conlinscoffee.com  
E-mail info@johnscoffee.com.tr  
Opening Hours  
Monday to Friday 09:00 – 18:00  
Service Number during off hours: +63  
916 5294052  
Opening Hours  
Pazertesinden cumaya 08:30–18:00  
Office Address/ Service Imes Sanayi Sitesi C Blok 308 Sok.  
Address Yukari Dudullu-Istanbul  
Distributor Address/  
Service Address  
2753 Park Avenue,  
Pasay City  
Metro Manila 1300, Philippines  
81  
17 JURA contact details  
U
United Arab Emirates  
Boncafé Middle East LLC.  
Customer Service  
Phone +97 14 28 28 742  
Fax +97 14 28 28 743  
E-Mail info@boncafeme.com  
Opening Hours  
Saturday to Thursday 8.30 – 17.30  
Distributor Address/  
Service Address  
P.O. Box 74044  
DUBAI, United Arab Emirates  
United Kingdom  
Fairfax Coffee Ltd, London  
Customer Service  
Phone +44 870 165 0429  
Fax +44 207 722 7646  
E-Mail info@fairfaxcookshop.com  
Opening Hours  
Monday to Friday 09.00 – 17.30  
Distributor Address/  
Service Address  
1 Regency Parade, Finchley Road,  
London NW3 5EQ  
V
Vietnam  
Please contact the Singapore office for details.  
82  
17 JURA contact details  
83  
Index  
Index  
A
D
E
Accessories 59  
Activate filter 16  
Adjusting  
Descale  
Water tank 48  
Descaling 43  
Grinder 19  
Permanent cup size settings 36  
Programmable switch-off time 37  
Adjusting the amount of water  
One-off setting during drink preparation  
22  
Easy Cappuccino Frother 4  
Cleaning 46  
Rinsing 46  
Espresso preparation 31  
Permanent adjusting the permanent cup  
size settings 23  
F
Altering coffee strength  
One-off setting during drink preparation  
22  
Filling  
Bean container 14  
Water tank 14  
Filter  
B
C
Activating 16  
Changing 40  
Using 16  
Barista 30  
Bean container 4  
Filling 14  
First-time use 15  
G
H
Cappuccino preparation 32  
Care products 60  
Changing  
Grinder  
Adjust 19  
Ground coffee  
Filter 40  
Pre-ground coffee preparation 33  
CLARIS plus 49  
CLARIS plus filter cartridge  
Activating 16  
Hot water preparation 35  
Changing 40  
Using 16  
M
Machine  
Cleaning 41  
Cleaning  
Easy Cappuccino Frother 46  
Machine 41  
Coffee powder  
Descaling 43  
Rinsing 40  
Setting up 13  
Swiching off 20  
Switching on 20  
Pre-ground coffee preparation 33  
Coffee preparation 31  
Coffee speciality 30  
Coffee strength  
Machine accessories 59  
Milk 57  
Milk foam preparation 34  
One-off setting during drink preparation  
22  
84  
Index  
O
P
W
One-off setting during drink preparation  
22  
Water hardness 18  
Assessing 18  
Setting 18  
Water tank 4  
Descaling 48  
Filling 14  
Pre-ground coffee preparation 33  
Preparation  
Cappuccino 32  
Coffee 31  
Espresso 31  
Hot water 35  
Milk foam 34  
Pre-ground coffee 33  
Putting into service  
First-time use 15  
R
S
Recipes 24  
Rinsing  
Easy Cappuccino Frother 46  
Machine 40  
Rotary switch 11  
Service 60  
Setting  
Water hardness 18  
Specialities  
Trendy specialities with milk 57  
Standby mode  
Switching off 20  
Switch-off time  
Adjustment of automatic switch-off time  
37  
Switching off 20  
Switching on 20  
U
Using filter 16  
85  
Art. 65928/C5/en/0702  
The machine complies with the following EU directives:  
Directives  
p
73/23/EEC of 19 February 1973, Low Voltage Directive including  
Amending Directive 93/68/EEC.  
p
89/336/EEC of 3 May 1989, Electromagnetic Compatibility,  
incl. Amending Directive 92/31/EEC.  
We reserve the right to make technical changes.  
Technical changes  
Feedback  
The illustrations used in the IMPRESSA C5 Manual show the  
IMPRESSA C5 platinum model. Your IMPRESSA could incorporate  
minor changes.  
Your opinion is important to us!  
Use the contact link at www.jura.com.  
JURA Elektroapparate AG  
Kaffeeweltstraße 10  
CH-4626 Niederbuchsiten  
www.jura.com  

Morphy Richards Coffeemaker CM47087 MUK Rev 3 User Manual
Microsoft Software Office 365 Home Premium 6GQ00024 User Manual
Lenmar Enterprises POWERPORTTM SOLAR PORTABLE CHARGER & BATTERY PPUS20 User Manual
LaCie Box User Manual
JVC KD G431 User Manual
Jura Capresso Coffeemaker E9 User Manual
Intel SSDSA2CW160G310 User Manual
Craftsman 79689 User Manual
Centon electronic DataStick Pro DSP1GB 004 User Manual
Black & Decker DCM680BF User Manual