Your Gateway Connected DVD Player
user'sguide
Configuring
Installing
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Player overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Front controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Setting Up Your Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing Gateway D5 Streaming Media Server . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Computer requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting to your audio/video system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installing the network card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installing batteries into the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Turning on your player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Navigating the player’s setup menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting up the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Wired Ethernet setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Wireless peer-to-peer setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting the IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Changing the player name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Playing computer media files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Entering Network mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Playing music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Playing movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Viewing pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Maintaining your player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3 Customizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setup menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting up digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configuring Dolby Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Configuring MP3 audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Configuring CD audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Configuring LPCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Configuring for other formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Adjusting the speaker balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Setting up analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Configuring Pro Logic virtual surround sound . . . . . . . . . . . . . . . . . . . . . . . . . 46
i
Adjusting center delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Adjusting surround delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Defining the speaker set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Setting up parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Importing media files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Importing media using plugins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Scheduling automatic scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Editing media file attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Deleting media files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Working with playlists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Renaming a playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Importing a playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Working with slideshows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Creating a new slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Editing a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Deleting a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Changing the computer name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Selecting the network card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Changing the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
5 Playing Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Accessing advanced features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Playing photo CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
DVD troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Getting help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
A Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
B Safety, Regulatory, and Legal Information. . . . . . . . . . . . . . . . . . . . . . .87
ii
Checking Out
Your Gateway
DVD Player 1
Features
With your Gateway Con n ected DVD Player, you can play
DVDs, CDs, an d digital m edia files on your h om e n etwork.
■ Fully com patible with DVD, CD, VCD/SVCD, Kodak
Picture CD, an d MP3 files on CD-R/CD-RW discs.
■ PC Card slot for wired or wireless access to a Microsoft
Win dows®-based h om e n etwork
■ Capable of stream in g digital con ten t from your
com puter to your TV, in cludin g MPEG1/MPEG2 video,
JPG ph otos, an d MP3/WMA audio files
■ Dolby Digital decodin g an d output
■ Com posite video, S-Video, an d com pon en t video
outputs (in cludin g progressive scan )
■ Optical an d coaxial digital audio jacks
■ 5.1-ch an n el audio jacks
1
Chapter 1: Checking Out Your Gateway DVD Player
Compatible discs
Th is DVD player can play discs of th e followin g form ats:
■ DVD (Region 1, North Am erica)
■ Dolby Digital 5.1
■ Audio CD (CDDA)
■ Video CD (VCD an d SVCD)
■ MP3 files on CD-R an d CD-RW
■ Kodak Picture CD
Player overview
Front controls
Power button
Sound controls
Menu controls
DVD playback
controls
MIC jacks
Menu
button
POWER button
Press to turn th e player on an d off.
Wh en th is button is on , th e yellow Power LED turn s on an d th e player en ters
On (fully operation al) m ode. Press th e POWER button on th e rem ote con trol
to switch between On an d Stan dby (low power) m odes. Wh en th e player en ters
Stan dby m ode, th e red Power LED turn s on . Wh en th e player is off, th e Power
LED turn s off.
MIC jacks
In sert ¼-in ch m icroph on e plugs h ere for karaoke.
2
Player overview
Sound controls
VOL
Rotate to adjust the microphone input volume.
ECHO
Rotate to adjust the echo effect for the microphone input.
Menu controls
Up button
Down button
Left button Right button
Connect button
Enter button
Press to navigate the on-screen menus. You can use
these buttons as an alternative to the remote control’s
arrow buttons.
(Left,
Right, Up, and
Down buttons)
Press to make on-screen selections. You can use this
button as an alternative to the remote control’s ENTER
button.
ENTER
Press to connect the player to the network. You can use
this button as an alternative to the remote control’s
CONNECT button.
CONNECT
3
Chapter 1: Checking Out Your Gateway DVD Player
DVD playback controls
Open/close button
Prev button
Menu button
Pause button
Play button
Stop button
Next button
Press to open and close the disc tray.
OPEN/CLOSE
PREV
Press to skip to the previous chapter or track while
in playback mode.
Press to skip to the next chapter or track while in
playback mode.
NEXT
STOP
Press to stop playback, and press again to return
to the menu on the DVD. Press PLAY to resume
playback.
Press to start playback.
PLAY
Press to pause playback and view the current
frame. Press PLAY to resume playback.
PAUSE
Press to view the DVD menu.
MENU
4
Player overview
Back
Audio jacks
Video jacks
Network card slot
Network card slot
In sert a n etwork PC Card in to th is slot.
Audio jacks
Coaxial (digital
audio)
Optical digital
audio
5.1 channel (surround sound)
2 channel (stereo)
Connect to the analog audio inputs of a 5.1-channel amplifier.
5.1 channel (surround
sound)
Connect to the left/right analog audio inputs of a TV, stereo, or
2-channel amplifier.
2 channel (stereo)
Connect to the coaxial digital audio input of a 5.1-channel amplifier.
Connect to the optical digital audio input of a 5.1-channel amplifier.
Coaxial (digital audio)
Optical digital audio
5
Chapter 1: Checking Out Your Gateway DVD Player
Video jacks
Y
Cb/Pb
Video out (composite)
Cr/Pr
S-Video out
Connect to the Pb/Cb video inputs of your TV.
Connect to the Y video input of your TV.
Cb/Pb (component/
progressive blue)
Y (component black
and white)
Connect to the Composite Video input of your TV.
Connect to the Pr/Cr video inputs of your TV.
Video out (composite)
Cr/Pr (component/
progressive red)
Connect to the S-Video input of your TV.
S-Video out
6
Player overview
Remote control
OPEN/CLOSE
POWER
Main controls
TITLE
SETUP
MY
2
3
1
MUSIC
ABC
DEF
MY
6
5
4
PHOTOS
GHI
JKL
MNO
Networking
controls
Numeric keypad
MY
8
9
7
VIDEOS
PQRS
TUV
WXYZ
CLEAR
0
CONNECT
SEARCH
DISPLAY
ENTER
Menu controls
MENU
RETURN
PAGE
PREV
PAGE
NEXT
REV
FWD
ZOOM
SLOW
VIDEO OUT REPEAT
A-B
Media playback
controls
AUDIO
SUBTITLE ANGLE
PLAY
PAUSE/STEP STOP
7
Chapter 1: Checking Out Your Gateway DVD Player
Main controls
Press to switch the player between Standby (low power)
and On (fully operational) modes.
POWER
The blue LED behind the front arrow buttons on the
player lights when the unit is On.
This button works only when the POWER button on the
front of the player is pressed.
Press to display DVD title menus for discs with multiple
titles. If a disc has a single title, TITLE functions like
MENU.
TITLE
While disc playback is stopped, press to open the
Welcome to Setup screen for adjusting DVD and
Network settings.
SETUP
Press to open and close the disc tray.
OPEN/CLOSE
Networking controls
Press to display the player’s My Music folder on the TV,
which lists the music media files available on your
networked computers. If a computer has not been
detected, only the Connect menu appears.
MY MUSIC
Press to display the player’s My Photos folder on the TV,
which lists the JPG image files available on your
networked computers. If a computer has not been
detected, only the Connect menu appears.
MY PHOTOS
MY VIDEOS
Press to display the player’s My Videos folder on the TV,
which lists the MPEG movie files available on your
networked computers. If a computer has not been
detected, only the Connect menu appears.
Press to search the network for shared media. A menu
will show you the My Music, My Photos, and My Videos
folders.
CONNECT
Numeric keypad
Press th ese button s to in put n um bers (such as th e ch apter, track, or tim e) in
on -screen m en us.
8
Player overview
Menu controls
Press to navigate on-screen menus.
Press to confirm menu settings.
Arrow buttons
ENTER
Press to jump to a specific time, title, chapter, or track
during disc playback.
SEARCH
Press to display current disc time and status information.
Press to view the DVD’s main menu.
DISPLAY
MENU
Press to return to the Welcome to Setup screen.
RETURN
Media playback controls
Press repeatedly to scan backward at variable speeds.
REV
Press repeatedly to scan forward at variable speeds.
Press to skip to the previous chapter or track.
Press to skip to the next chapter or track.
FWD
PREV
NEXT
Press to zoom in or out at various levels of magnification.
ZOOM
VIDEO OUT
While playback is stopped, press repeatedly until the
setting matches your video cable connection. For more
Press to set special playback functions, including
Repeat.
REPEAT
A-B
Press to repeat an audio or video segment between two
points (A and B). For more information, see “Repeating
a scene or segment” on page 74.
Press repeatedly for slow motion playback at variable
speeds.
SLOW
AUDIO
Press to select among available audio
tracks/formats/channels during DVD/SVCD/VCD
playback.
Press to select among available subtitle languages
during DVD/SVCD playback.
SUBTITLE
9
Chapter 1: Checking Out Your Gateway DVD Player
Press to view alternate angles during DVD playback (if
available).
ANGLE
Press once to pause playback, and press again to step
forward one frame at a time.
PAUSE/STEP
STOP
Press once to stop playback (press PLAY to resume).
Press twice to stop playback and reset to the beginning
of the disc.
Press to start playback.
PLAY
10
Setting Up Your
Player
2
Th is ch apter describes h ow to con n ect your Gateway
Con n ected DVD Player to your TV, audio system , an d h om e
n etwork. You n eed to com plete th ese steps in th e followin g
order:
1 Set up your n etwork an d m ake sure th at your h om e
n etwork is workin g correctly.
2 In stall th e Gateway D5 Stream in g Media Server
program an d start it for th e first tim e.
3 Con n ect th e player to your TV, audio system , an d
n etwork.
Important
Write your player’s order number
inside the front cover of your user’s
guide. You will need the order number
as proof of purchase if you contact
Technical Support.
11
Chapter 2: Setting Up Your Player
About your home network
Before you begin , you m ust h ave a Microsoft Win dows-based h om e n etwork
set up. If you do n ot already h ave a n etwork in stalled, you n eed to purch ase
th e n etwork com pon en ts an d follow th e in stallation in struction s provided by
th e m an ufacturer. Th e Gateway Con n ected DVD Player supports all m ajor types
of h om e n etworks, in cludin g:
■ Wired Eth ern et
A wired Eth ern et n etwork con sists of two or m ore devices con n ected
th rough an Eth ern et cable.
■ Wireless access poin t
A Wireless access poin t n etwork uses radio waves to lin k devices usin g a
wireless n etwork card, an access poin t, an d a wired Eth ern et n etwork.
■ Wireless peer-to-peer
A wireless peer-to-peer n etwork con sists of two or m ore wireless Eth ern et
com puters th at com m un icate with each oth er with out a wireless access
poin t.
If your Gateway Con n ected DVD Player cam e with a n etwork card, th e card is
on e of th e followin g types:
■ PC Card to Eth ern et adapter card
■ Wireless 802.11b n etwork PC Card
Important
If you are using a wireless network with an access point,
be sure to configure the access point according to the
manufacturer's instructions before continuing.
12
Installing Gateway D5 Streaming Media Server
Installing Gateway D5 Streaming
Media Server
After you m ake sure th at your h om e n etwork is workin g correctly, in stall th e
Media Server program on to each com puter th at h as m edia files you wan t to
access.
Important
Do not install Media Server until you make sure that your
home network is working correctly.
Computer requirements
■ Com puter with Pen tium processor, 700 MHz or faster
■ Network con n ection (wired or wireless)
■ Hard drive with at least 20 MB of free space
■ 128 MB of m em ory
■ CD drive
■ Network PC Card (also kn own as PCMCIA). A wired Eth ern et adapter card
or wireless n etwork card m ay already be in cluded with your player.
■ Microsoft Win dows 98 SE, Win dows Me, Win dows 2000, or Win dows XP
To install Media Server:
1 Turn on th e com puter, th en close all open program s.
2 In sert th e Gateway Connected DVD Player Installation CD in to th e CD drive
on your com puter. Th e in stall wizard starts.
3 Follow th e on -screen in struction s to fin ish th e in stallation .
If you are prom pted to select your com puter’s n etwork card, click th e
n etwork card you wan t to use, th en click Next.
13
Chapter 2: Setting Up Your Player
Media Server open s after th e in stall program is fin ish ed, an d open s
autom atically wh en ever your com puter is started. Th e Media Server
icon in th e Win dows taskbar sh ows th at th e program is run n in g.
You are prom pted to im port m edia.
4 If you do n ot h ave an y m usic, m ovies, or pictures on your com puter, click
No. Your first-tim e setup of Media Server is com plete.
- OR -
If you h ave m edia on your com puter, click Yes. You are prom pted to select
plugin s.
5 Click th e plugin you wan t to use, th en click Scan. Your files are im ported
in to Media Server. Your first-tim e setup of Media Server is com plete.
Tips & Tricks
Select only one plugin for each type of media. For example,
to import MP3 files on a computer where you have both
MusicMatch Jukebox and Windows Media Player installed,
select only one of the two plugins.
than one media type, select one plugin and import the
media for that plugin. Then select another plugin and
import the media for that plugin.
6 Repeat Steps 1-5 on each com puter you wan t to access from th e player.
For m ore in form ation on usin g Media Server, see “Usin g Gateway D5
Stream in g Media Server” on page 53.
14
Connecting the player
Connecting the player
Connecting to your audio/video system
To connect your player to your audio/video system:
Y (component/ progressive
black and white)
Cb/Pb (component/
progressive blue)
Video out (composite)
Cr/Pr (component/
progressive red)
S-Video out
1 Make sure th at all video com pon en ts are turn ed off.
2 Con n ect th e player to your TV in on e of th ree ways:
■
Com posite video
Con n ect on e en d of th e supplied yellow video cable to th e VIDEO OUT
jack on th e back of th e player, th en con n ect th e oth er en d to th e jack
on your TV.
■
S-Video
Con n ect on e en d of an S-Video cable (n ot in cluded) to th e
S-VIDEO OUT jack on th e back of th e player, th en con n ect th e oth er
en d to th e S-Video jack on your TV.
15
Chapter 2: Setting Up Your Player
■
Progressive/com pon en t video (best video quality)
Con n ect on e en d of each com pon en t video cable (n ot in cluded) to
th e PROGRESSIVE/COMPONENT Cb/Pb, Y, an d Cr/Pr jacks on th e back
of th e player, th en con n ect th e oth er en ds to th e correspon din g
color-coded jacks on your TV.
3 Con n ect your player to your audio system in on e of four ways:
5.1 channel front(R)
(surround sound front right)
5.1 channel sur.(R) (surround
sound right)
5.1 channel center
(surround sound center)
2 Ch. R (right stereo)
5.1 channel sub w.
(surround sound subwoofer)
Optical digital audio
Coaxial (digital audio)
2 Ch. L (left stereo)
5.1 channel sur.(L) (surround
sound left)
5.1 channel front(L)
(surround sound front left)
■
2-ch an n el audio (stereo)
Con n ect on e en d of th e in cluded red an d wh ite audio/video cables
to th e 2 CH. AUDIO R an d L jacks on th e back of th e player, th en con n ect
th e oth er en ds to th e righ t/left audio jacks on your TV, stereo, or
2-ch an n el an alog am plifier.
■
5.1-ch an n el surroun d an alog audio
Con n ect on e en d of th e six audio cables (n ot in cluded) to th e
5.1 CHANNEL CENTER, SUR.(R), FRONT(R), SUB W., SUR(L), an d FRONT(L)
jacks on th e back of th e player, th en con n ect th e oth er en ds to th e
correspon din g an alog audio jacks of your 5.1-ch an n el am plifier.
16
Connecting the player
■
■
Digital audio (coaxial)
Con n ect on e en d of a digital coaxial cable (n ot in cluded) to th e
COAXIAL jack on th e back of th e player, th en con n ect th e oth er en d
to th e coaxial digital audio jack of your am plifier.
Digital audio (optical)
Con n ect on e en d of an optical cable (n ot in cluded) to th e OPTICAL
Tips & Tricks
If you are using a digital audio connection (COAXIAL or
OPTICAL DIGITAL AUDIO), you must set the audio output
format to match the digital decoding capabilities of your
amplifier. For more information, see “Setting up digital
audio” on page 39.
Installing the network card
Do n ot plug in th e player’s power cord or press th e POWER button on th e fron t
un til you h ave in stalled th e n etwork card.
To install the network card:
1 Make sure th at th e player is turn ed off.
2 In sert your n etwork PC Card (on e m ay h ave been provided with your
player) in to th e NETWORK CARD slot in th e back of th e player. Make sure
th at th e n etwork card is pressed all th e way in .
Network card slot
17
Chapter 2: Setting Up Your Player
Important
Do not remove the card while the player is turned on. If
you remove the card while the player is on, all playback
of networked media will stop.
an Eth ern et cable to th e n etwork card, th en con n ect th e oth er en d to an
Eth ern et jack on your existin g n etwork.
4 After you con n ect video an d audio cables an d in stall th e n etwork card,
con figure your video by followin g th e in struction s in “Turn in g on your
player” on page 19.
Installing batteries into the remote control
To install the batteries:
1 Turn th e rem ote con trol over, th en rem ove th e battery cover.
2 In sert two AAA batteries in to th e battery bay. Make sure th at th e batteries
are orien ted accordin g to th e diagram in side th e battery bay.
3 Replace th e battery cover.
18
Connecting the player
Turning on your player
To turn on your player:
1 Make sure th at your com puter is on an d run n in g Media Server, your h om e
n etwork is set up, an d all audio an d video devices are turn ed on .
2 Con n ect th e player’s power cord to a wall outlet, th en press th e POWER
button on th e fron t of th e player. Th e Power LED turn s yellow.
3 Turn on your TV, th en use its con trols to set it to th e audio/video in put
type con n ected to th e player.
4 Use your audio system ’s con trols to set th e audio system to th e in put type
con n ected to th e player.
5 Press VIDEO OUT repeatedly un til th e settin g m atch es your video
con n ection . See th e table below for com bin ation s of video settin gs an d
con n ection s th at also work. Th e rows on th e left n am e th e type of cable
con n ection your player an d TV use, an d th e colum n s across th e top n am e
th e video settin g you can select by pressin g th e VIDEO OUT button .
Audio jacks
Composite
setting
S-Video
setting
Interlaced
Component
setting
Progressive
Component
setting
Best
Works
Composite jack
S-Video jack
Works
Works
Best
Best
Interlaced
component jacks
Best
Progressive
component jacks
19
Chapter 2: Setting Up Your Player
6 Go to “Settin g up th e n etwork” on page 20 to com plete th e in itial setup
of your player.
Navigating the player’s setup
menus
To n avigate th e player’s setup m en us, press th e followin g button s on your
rem ote con trol:
Remote Button
STOP
Function
Press before pressing SETUP.
SETUP
Press to open and close the Welcome to Setup screen.
Press to highlight options within menus.
(up and
down arrows)
(left and
Press to change option settings within menus.
right arrows)
ENTER
Press to activate the current selection.
RETURN
Press to close the Welcome to Setup screen.
Tips & Tricks
Unless specified otherwise, all buttons mentioned in the
following procedures are buttons on the remote control.
Setting up the network
n etwork. Ch oose on e of th e th ree setup option s depen din g on your n etwork
con figuration :
■ For wired Eth ern et setup, see “Wired Eth ern et setup” on page 21.
■ For wireless access poin t setup, see “Wireless access poin t setup” on
page 22.
20
Setting up the network
■ For wireless peer-to-peer setup, see “Wireless peer-to-peer setup” on
page 25.
■
■
Important
Always have Media Server running on your computer
before turning on the player.
For help during network setup, highlight Help, then press
ENTER.
Wired Ethernet setup
Th e Media Server icon
is run n in g.
in th e Win dows taskbar sh ows th at th e program
If th e Media Server icon h as a red “x” on it, Media Server is run n in g but
can n ot con n ect to th e n etwork. See “Network troublesh ootin g” on
page 79.
2 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
21
Chapter 2: Setting Up Your Player
3 Use your rem ote con trol’s arrow button s to h igh ligh t Network, th en press
ENTER. Th e m essage “Loadin g n etwork settin gs” appears, an d th e player
autom atically con n ects to th e wired Eth ern et n etwork. If m ultiple
n etworks are available, h igh ligh t th e Network settin g, th en press ENTER
again to select th e correct n etwork from th e n etwork list.
Th e IP address appears in th e lower-righ t corn er of th e screen . To ch an ge
th e way th e IP address is selected, see “Settin g th e IP address” on page 28.
th e player n am e” on page 29.
4 High ligh t OK, th en press ENTER. Network setup is com plete.
5 Press SETUP or RETURN to close th e Welcome to Setup screen .
6 Go to “Custom izin g” on page 35 for in struction s on custom izin g your
player’s oth er settin gs.
Wireless access point setup
Th e Media Server icon
is run n in g.
in th e Win dows taskbar sh ows th at th e program
If th e Media Server icon h as a red “x” on it, Media Server is run n in g but
can n ot con n ect to th e n etwork. See “Network troublesh ootin g” on
page 79.
22
Setting up the network
2 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
3 Use your rem ote con trol’s arrow button s to h igh ligh t Network, th en press
ENTER.
4 High ligh t Network, th en press ENTER to search for an available n etwork.
A list of available n etworks open s. Nam es of n etworks usin g wireless access
poin ts en d with “ACC PT.”
5 High ligh t on e of th e detected n etworks, th en press ENTER. Th e m essage
“Join in g n ew n etwork please wait” appears, th en th e m essage “Successfully
join ed [n etwork n am e]” appears.
6 Press ENTER to con tin ue. Th e m ain Network m en u open s.
Th e IP address appears in th e lower-righ t corn er of th e screen . To ch an ge
th e way th e IP address is selected, see “Settin g th e IP address” on page 28.
To ch an ge th e player n am e (as it appears to oth er players), see “Ch an gin g
th e player n am e” on page 29.
23
Chapter 2: Setting Up Your Player
7 High ligh t Security: WEP Settings, th en press ENTER.
8 High ligh t Key Format, th en press th e
button s to select eith er Hex digits,
ASCII characters, or Disabled.
9 High ligh t Key Size, th en press th e
button s to select on e of th e
followin g:
If you selected Hex digits in Step 8:
■
■
64/40 bits (10 digits)
128/104 bits (26 digits)
If you selected ASCII characters in Step 8:
■
■
64/40 bits (5 characters)
128/104 bits (13 characters)
10 High ligh t Key Index, th en press th e
button s to select th e key in dex th at
m atch es your n etwork’s.
11 High ligh t Key Data, th en repeatedly press th e n um ber button s on your
rem ote con trol to en ter your n etwork’s en cryption key. Press th e
button
to set th e n ext ch aracter, an d press CLEAR to erase a ch aracter.
If you selected Hex digits in Step 8, en ter th e key accordin g to th e table
below:
Press:
For:
1
2
3
4
5
6
7
8
9
0
1, A, B, C
2, D, E, F
3
4
5
6
7
8
9
0
- OR -
24
Setting up the network
If you selected ASCII characters in Step 8, en ter th e key accordin g to th e
table below:
Press:
For:
1
2
3
4
5
6
7
8
9
0
1 . @ / : ‘ , ? ! - _ # * \ " $ % & + ; = ( ) < > [ ] ‘ ~ ^ { } |
2, A, B, C, a, b, c
3, D, E, F, d, e, f
4, G, H, I, g, h, i
5, J, K, L, j, k, l
6, M, N, O, m, n, o
7, P, Q, R, S, p, q, r, s
8, T, U, V, t, u, v
9, W, X, Y, Z, w, x, y, z
0
12 High ligh t OK, th en press ENTER.
13 High ligh t OK again , th en press ENTER. Network setup is com plete.
14 Press SETUP or RETURN to close th e Welcome to Setup screen .
15 Go to “Custom izin g” on page 35 for in struction s on custom izin g your
player’s oth er settin gs.
Wireless peer-to-peer setup
Important
Wireless network cards used in a peer-to-peer network
must be set to ad hoc mode instead of infrastructure mode.
For more information, see your network card’s
documentation.
Th e Media Server icon
is run n in g.
in th e Win dows taskbar sh ows th at th e program
If th e Media Server icon h as a red “x” on it, Media Server is run n in g but
can n ot con n ect to th e n etwork. See “Network troublesh ootin g” on
page 79.
25
Chapter 2: Setting Up Your Player
2 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
3 Use your rem ote con trol’s arrow button s to h igh ligh t Network, th en press
ENTER.
4 High ligh t Network, th en press ENTER. A list of available n etworks open s.
Nam es of peer-to-peer n etworks en d with “P2P.”
5 High ligh t Create Peer-to-Peer Network, th en press ENTER.
26
Setting up the network
6 En ter th e n am e of th e n etwork by repeatedly pressin g th e rem ote con trol's
n um ber button s accordin g to th e followin g table. Press
to set th e n ext
ch aracter, an d press CLEAR to erase a ch aracter.
Press:
For:
1
2
3
4
5
6
7
8
9
0
1
2, A, B, C, a, b, c
3, D, E, F, d, e, f
4, G, H, I, g, h, i
5, J, K, L, j, k, l
6, M, N, O, m, n, o
7, P, Q, R, S, p, q, r, s
8, T, U, V, t, u, v
9, W, X, Y, Z, w, x, y, z
0
7 High ligh t OK, th en press ENTER. “Successfully created P2P n etwork”
appears.
8 Press ENTER.
9 On your com puter, click Start, Control Panel, th en click Network Connections.
Networks.
11 Click th e P2P n etwork n am e you just created on th e player, th en click
Connect.
If you wan t to ch an ge th e player n am e (as it appears to oth er players), see
12 On th e player, h igh ligh t OK, th en press ENTER on th e rem ote con trol.
Network setup is com plete.
13 Press SETUP or RETURN to close th e Welcome to Setup screen .
14 Go to “Custom izin g” on page 35 for in struction s on custom izin g your
player’s oth er settin gs.
27
Chapter 2: Setting Up Your Player
Setting the IP address
Wh ile con n ectin g to a n etwork, n etworked devices are assign ed a un ique
iden tifier kn own as an IP address. IP addresses are used to direct n etwork traffic
to th e correct destin ation . An IP address is usually displayed as n um bers
separated by periods, such as 192.168.0.2.
To change the way the IP address is assigned:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 High ligh t Network, th en press ENTER.
3 High ligh t IP Address.
4 Press th e
button s to ch oose on e of th e followin g:
■
DHCP (Auto) — Autom atically assign s an IP address an d provides oth er
con figuration in form ation (recom m en ded)
Important
DHCP (Dyanamic Host Configuration Protocol) is an
Internet protocol for automatically configuring computers
that use TCP/IP. DHCP can be used to automatically
assign IP addresses and to provide other configuration
information.
28
Setting up the network
■
■
Auto IP — Lets th e player obtain an IP address for itself.
Static (Manual) — Lets you set th e IP address an d Subn et Mask.
Important
Static IP addresses are numeric addresses that you assign
to uniquely identify your network devices. Only
experienced network users should manually set the
IP address.
If you select Static (Manual), press the
button to select
“Set,” then manually enter the IP address and Subnet
Mask with the 0 through 9 buttons. Highlight OK, then
press ENTER to save and exit.
5 High ligh t OK, th en press ENTER.
6 Press SETUP or RETURN to close th e Welcome to Setup screen .
Changing the player name
To change the name of the player on the network:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 High ligh t Network, th en press ENTER.
3 High ligh t Player Name, th en use th e followin g button s to n am e th e player:
■
— Press to m ove th e text in sertion poin t left an d righ t.
■
0-9 button s — Press repeatedly to select th e desired ch aracter, th en
press th e
ch aracter.
button to save th e ch aracter an d m ove to th e n ext
■
CLEAR — Press to erase a ch aracter.
4 High ligh t OK, th en press ENTER.
5 Press SETUP or RETURN to close th e Welcome to Setup screen .
29
Chapter 2: Setting Up Your Player
Playing computer media files
You can play th ree types of com puter m edia on your player:
■
■
■
Audio — MP3 an d WMA files
Video — MPEG-1 an d MPEG-2 video files
Im ages — JPG/JPEG files
Entering Network mode
To play com puter m edia files, your player m ust first en ter Network m ode.
To enter Network mode:
1 Make sure your com puter is on an d run n in g Media Server.
2 Press th e POWER button on th e fron t of th e player. If th e player is in
Stan dby power m ode, press POWER on th e rem ote con trol to turn on th e
player.
3 Turn on your TV, th en set it to th e audio/video in put th at is con n ected
to your player.
4 Turn on your audio system if usin g an extern al am plifier or audio system ,
th en set it to th e in put con n ected to th e player.
5 Press CONNECT on th e rem ote con trol to en ter Network m ode. Th e player
con n ects to th e n etwork, th en displays th e Network m ain m en u. Use th e
followin g rem ote con trol button s to n avigate in Network m ode:
Button
Function
NETWORK
Press to switch between Network mode and DVD mode.
Press to move the cursor left, right, up, and down in the
Network menu.
ENTER
Press to make selections in the Network menu.
30
Playing computer media files
Exiting Network mode
To exit Network mode and return to DVD mode:
■ Press th e CONNECT button . Th e player exits Network m ode an d en ters DVD
m ode. If a DVD is in th e disc tray, th e DVD plays autom atically.
Playing music
You can play your com puter’s MP3 an d WMA audio files on your audio system .
To play music:
1 En ter Network m ode. For m ore in form ation , see page 30.
2 High ligh t Audio, th en press ENTER.
3 High ligh t a category (for exam ple, Artist), th en press ENTER.
4 High ligh t an artist, th en press ENTER.
5 To play a son g, h igh ligh t th e son g by th e artist, th en press ENTER.
- OR -
To play all son gs in th e curren t folder in a repeatin g loop, press PLAY
Playing a playlist
For in form ation on creatin g a playlist, see “Workin g with playlists” on page 60.
To play a playlist:
1 En ter Network m ode. For m ore in form ation , see page 30.
2 High ligh t Audio, th en press ENTER.
3 High ligh t Playlists, th en press ENTER.
4 High ligh t th e playlist you wan t, th en press PLAY to play th e en tire playlist.
- OR -
If you wan t to play on ly a certain son g with in playlist, h igh ligh t th e
playlist, press ENTER, th en h igh ligh t th e son g an d press PLAY.
31
Chapter 2: Setting Up Your Player
Playing movies
You can play MPEG-1 an d MPEG-2 video files from your com puter on your TV.
To play a movie:
1 En ter Network m ode. For m ore in form ation , see page 30.
2 High ligh t Video, th en press ENTER.
3 To play on e m ovie, h igh ligh t th e m ovie, th en press ENTER.
- OR -
To play all m ovies in a repeatin g loop, h igh ligh t th e first m ovie you wan t
to play, th en press PLAY.
Viewing pictures
To view a picture:
1 En ter Network m ode. For m ore in form ation , see page 30.
2 High ligh t Images, th en press ENTER.
3 High ligh t a category, th en press ENTER.
4 To view on ly on e picture, h igh ligh t th e picture you wan t to view, th en
press ENTER.
- OR -
To view all pictures in a repeatin g loop, press PLAY.
If you view the first picture in the list, all of the remaining
pictures in the list will automatically display in a slideshow.
For in form ation on creatin g a slidesh ow, see “Workin g with slidesh ows” on
page 63.
32
Maintaining your player
To view a slideshow:
1 En ter Network m ode. For m ore in form ation , see page 30.
2 High ligh t Images, th en press ENTER.
3 High ligh t Slideshows, th en press ENTER.
4 To play a slidesh ow, h igh ligh t th e slidesh ow you wan t, th en press PLAY.
- OR -
To display th e list of pictures in th e slidesh ow an d th e son g for th e
slidesh ow, h igh ligh t th e slidesh ow you wan t, th en press ENTER.
To view thumbnails of your images:
■ Wh ile viewin g an im age or a slidesh ow, press ZOOM to view up to 16
th um bn ails per screen .
Maintaining your player
■ Un plug th e power before you clean th e outside of th e player. Use a dam p
cloth for clean in g. Do n ot use liquid clean ers or aerosol clean ers.
■ Do n ot use th is product n ear water or in dam p en viron m en ts, such as a
bath room , an d do n ot use th is product n ear h eat sources, such as radiators
an d stoves.
■ Never block th e ven tilation open in gs. Do n ot put th e player on a soft
surface such as a bed, couch , or carpet.
■ Do n ot place th e power cord in a location wh ere it can be pin ch ed (such
as beh in d a h in ge of a cabin et door) or stepped on , an d plug th e player
in to a surge protector in stead of directly in to a wall outlet. For extra
protection durin g a ligh tn in g storm , un plug th e player from th e surge
protector or wall outlet.
■ Do n ot try to service th is product yourself. Open in g or rem ovin g an y
covers can expose you to dan gerous voltages an d will void th e player’s
warran ty.
33
Chapter 2: Setting Up Your Player
Caring for DVDs and other discs
■ To keep th e disc clean , always h old it by th e edges. Do n ot touch th e
surface. Wh en th e disc is n ot bein g played, store it in its case.
■ Do n ot expose th e disc to direct sun ligh t or h eat sources. Leavin g it in a
car parked in direct sun ligh t is likely to dam age th e disc because
tem peratures m ay rise con siderably in side th e car.
Cleaning discs
Clean discs by wipin g from th e cen ter to th e edge, n ot aroun d in a circle, usin g
a product, such as a soft cloth , m ade especially for clean in g CDs an d DVDs.
Do n ot use solven ts such as ben zin e, th in n er, or an ti-static spray m ade for vin yl
records.
34
Customizing
3
Setup menu overview
■ For lan guage settin gs, see page 36.
■ For video settin gs, see page 38.
■ For digital audio settin gs, see page 39.
■ For an alog audio settin gs, see page 46.
■ For paren tal con trol settin gs, see page 51.
35
Chapter 3: Customizing
Using the remote control in Setup menus
To m ove th rough th e player’s Setup m en us, press th e followin g button s on your
rem ote con trol:
Remote Button
STOP
Function
Press before pressing SETUP.
SETUP
Press to open and close the Welcome to Setup screen.
Press to highlight options within menus.
(up and
down arrows)
(left and
Press to change option settings within menus.
right arrows)
ENTER
Press to activate the current selection.
RETURN
Press to return to the Welcome to Setup screen.
Tips & Tricks
Unless otherwise specified, all buttons mentioned in the
following procedures are buttons on the remote control.
Setting up languages
Th e Language m en u lets you set your lan guage preferen ces for DVD subtitles,
DVD audio soun dtracks, an d DVD m en us.
36
Setting up languages
To set your language preferences:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e m ain
Setup m en u open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Language, th en press
ENTER. Th e Language setup m en u open s.
37
Chapter 3: Customizing
3 Press th e
button s to h igh ligh t an y of th e followin g:
■
Subtitle
Press th e
button s to select English, French, Spanish, Auto, or
Off (default). Select Auto to always select th e DVD’s default subtitle
lan guage. Select Off to always turn subtitles off (default). Because
subtitle selection s vary am on g DVDs, th e DVD itself m ay override
your selection .
■
■
Audio
Press th e
button s to select English (default), French, or Spanish.
Because audio lan guage selection s vary am on g DVDs, th e DVD itself
m ay override your selection .
Disc Menu
Press th e
button s to select English (default), French, or Spanish.
Because m en u lan guage selection s vary am on g DVDs, th e DVD itself
m ay override your selection .
4 High ligh t OK, th en press ENTER.
5 Press SETUP or RETURN to close th e Welcome to Setup screen .
Setting up video
Th e Video m en u lets you set th e aspect ratio (video form at to m atch th e sh ape
of your TV screen ) for DVD m ovies.
To set the aspect ratio:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e m ain
Setup m en u open s.
38
Setting up digital audio
2 Use your rem ote con trol’s arrow button s to h igh ligh t Video, th en press
ENTER. Th e Video setup m en u open s.
3 Press th e
4 Press th e
button s to select TV aspect.
button s to select:
■
■
■
Fullscreen (default)
Select if you h ave a stan dard 4:3 television an d prefer to watch
full-screen version s of DVD m ovies (if available).
Letterbox
Select if you h ave a stan dard 4:3 television an d prefer to watch
widescreen version s of DVD m ovies (if available).
Widescreen
Select if you h ave a widescreen 16:9 television .
5 High ligh t OK, th en press ENTER.
6 Press SETUP or RETURN to close th e Welcome to Setup screen .
Setting up digital audio
Th e Digital m en u lets you set th e sign al form at for th e coaxial an d optical digital
audio jacks. For exam ple, if you con n ected th e player to an extern al am plifier
th at h as a Dolby Digital decoder, you sh ould set th e Dolby Digital settin gs to
Bitstream (to let your am plifier’s Dolby Digital decoder work with th e player’s
audio sign al).
39
Chapter 3: Customizing
Configuring Dolby Digital
Th is settin g con figures th e form at of Dolby Digital 5.1 output sign als.
To set your Dolby Digital preferences:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Digital, th en press
ENTER. Th e Digital audio setup m en u open s.
40
Setting up digital audio
3 High ligh t Dolby, th en press th e
button s to select:
■
Bitstream
Outputs raw 5.1-ch an n el digital sign als from th e optical or coaxial
digital audio jacks. Use th is settin g wh en th e player is con n ected to
an extern al am plifier with a Dolby Digital decoder.
■
■
PCM
Outputs 2-ch an n el digital audio from th e optical or coaxial digital
audio jacks.
Off
Turn s off Dolby Digital output.
4 High ligh t OK, th en press ENTER.
Configuring MP3 audio
Th is option sets th e outgoin g digital audio form at of MP3 tracks.
To set your MP3 output format:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Digital, th en press
ENTER. Th e Digital audio setup m en u appears.
41
Chapter 3: Customizing
3 High ligh t MP3, th en press th e
button s to select:
■
Bitstream
Outputs raw MP3 digital sign als from th e optical or coaxial digital
audio jacks.
■
■
PCM
Outputs 2-ch an n el digital audio from th e optical or coaxial digital
audio jacks.
Off
Turn s off MP3 output.
4 High ligh t OK, th en press ENTER.
Configuring CD audio
Th is option sets th e outgoin g digital audio form at of CD tracks.
To set your CD output format:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Digital, th en press
ENTER. Th e Digital audio setup m en u open s.
42
Setting up digital audio
3 High ligh t CD, th en press th e
button s to select:
■
■
■
Origin (default)
Outputs CD digital audio from th e optical or coaxial digital audio jacks
in its origin al form at.
PCM
Outputs 2-ch an n el digital audio from th e optical or coaxial digital
audio jacks.
Off
Turn s off CD audio output.
4 High ligh t OK, th en press ENTER.
Configuring LPCM
Th is option sets th e outgoin g digital audio form at of LPCM tracks.
To set your LPCM output format:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Digital, th en press
ENTER. Th e Digital audio setup m en u open s.
3 High ligh t More, th en press ENTER.
43
Chapter 3: Customizing
4 High ligh t LPCM, th en press th e
button s to select:
■
■
■
Origin (default)
Outputs th e LPCM digital audio sign als from th e optical or coaxial
digital audio jacks in its origin al form at.
PCM
Outputs 2-ch an n el digital audio from th e optical or coaxial digital
audio jacks.
Off
Turn s off LPCM audio output.
5 High ligh t OK, th en press ENTER.
Configuring for other formats
Th is option sets th e outgoin g digital audio for form ats n ot covered in th e
previous procedures.
To set your digital output for other formats:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Digital, th en press
ENTER. Th e Digital audio setup m en u open s.
3 High ligh t More, th en press ENTER.
44
Setting up digital audio
4 High ligh t Others, th en press th e
button s to select:
■
■
■
Bitstream (default)
Outputs digital audio sign als from th e optical or coaxial digital audio
jacks.
PCM
Outputs 2-ch an n el digital audio from th e optical or coaxial digital
audio jacks.
Off
Turn s off audio output for oth er form ats.
5 High ligh t OK, th en press ENTER.
Adjusting the speaker balance
Th is feature adjusts th e soun d balan ce of your 5.1-ch an n el speakers system .
To run the speaker test:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Digital, th en press
ENTER. Th e Digital audio setup m en u open s.
3 High ligh t More, th en press ENTER.
4 High ligh t Speaker Test, th en press ENTER. A five-secon d test ton e is sen t
to each of th e six speakers in th e followin g order: Left, Righ t, Left Surroun d,
Righ t Surroun d, Cen ter, Subwoofer.
45
Chapter 3: Customizing
5 Adjust th e speaker levels on your am plifier as required.
6 Press STOP to can cel th e test ton e.
Setting up analog audio
Th e Analog Audio m en u lets you set th e form at of th e sign al from th e
5.1 ch an n el (surroun d) an d 2 ch an n el (stereo) audio jacks.
Configuring Pro Logic virtual surround sound
Th e player h as a built-in Dolby Pro Logic decoder to provide virtual surroun d
soun d for PCM (stereo) from th e 5.1-ch an n el an alog audio jacks.
To adjust Pro Logic settings:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
46
Setting up analog audio
2 Use your rem ote con trol’s arrow button s to h igh ligh t Analog, th en press
ENTER. Th e Analog audio setup m en u open s.
3 High ligh t Pro Logic, th en press th e
button s to select:
■
■
■
Auto (Default)
Outputs stereo audio soun dtracks in Dolby Pro Logic m ode.
On
Outputs all audio soun dtracks in Dolby Pro Logic m ode.
Off
Turn s off Dolby Pro Logic.
4 High ligh t OK, th en press ENTER.
47
Chapter 3: Customizing
Adjusting center delay
Use th is settin g to delay th e soun d from th e cen ter speaker so it arrives at your
listen in g area at th e sam e tim e as th e left an d righ t fron t speakers. Use th is
settin g on ly if th e cen ter speaker is closer to your listen in g area th an your fron t
speakers are.
To adjust the center delay:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Analog, th en press
ENTER. Th e Analog audio setup m en u open s.
3 High ligh t Ctr. Delay, th en press th e
button s to set th e delay from
0 to 1.75 m illisecon ds.
Assum e on e m illisecon d of delay for every on e foot of differen ce in
distan ce. For exam ple, if your cen ter speaker is on e foot closer th an your
fron t speakers, set th e delay to 1 m illisecon d.
4 High ligh t OK, th en press ENTER.
Adjusting surround delay
Use th is settin g to delay th e soun d from th e surroun d left an d righ t speakers
so it arrives at your listen in g area at th e sam e tim e as th e left an d righ t fron t
speakers. Use th is settin g on ly if th e surroun d speakers are closer to your
prim ary listen in g area th an your fron t speakers are.
48
Setting up analog audio
To adjust the surround delay:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Analog, th en press
ENTER. Th e Analog audio setup m en u open s.
3 High ligh t Surr. Delay, th en press th e
button s to set th e delay from
0 to 5.25 m illisecon ds.
Assum e 1 m illisecon d of delay for every on e foot of differen ce in distan ce.
For exam ple, if your surroun d speakers are on e foot closer th an your fron t
speakers, set th e surroun d delay to 1 m illisecon d.
4 High ligh t OK, th en press ENTER.
49
Chapter 3: Customizing
Defining the speaker set
Use th is settin g to iden tify th e type of speakers in your audio setup.
To define your speaker setup:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Analog, th en press
ENTER. Th e Analog audio setup m en u open s.
3 High ligh t Speaker Set, th en press ENTER. Th e active speakers are listed.
4 High ligh t each of th e followin g speakers, th en press th e
button s to
turn th em on or off:
■
Subwoofer
Turn s subwoofer output on or off.
■
Surround
Turn s left/righ t surroun d speaker output on or off.
■
Center
Turn s cen ter speaker output on or off.
5 High ligh t Ctr Spkr Size, th en press th e
button s to select Large or Small
to in dicate th e relative size of th e cen ter speaker.
6 High ligh t OK, th en press ENTER.
50
Setting up parental controls
Setting up parental controls
Th e Rating m en u lets you block playback of DVDs by usin g a password-protected
ratin g system . Not all DVDs are rated.
To set parental controls:
1 On th e player’s rem ote con trol, press STOP, th en press SETUP. Th e Welcome
to Setup screen open s.
2 Use your rem ote con trol’s arrow button s to h igh ligh t Parental, th en press
ENTER. Th e Password m en u open s.
51
Chapter 3: Customizing
3 High ligh t Password, th en press th e followin g button s to en ter a
four-ch aracter password:
■
■
— Move th e text in sertion poin t left an d righ t.
0-9 button s — Press repeatedly to select th e desired ch aracter, th en
press th e
ch aracter.
button to save th e ch aracter an d m ove to th e n ext
■
■
CLEAR — Press to erase a ch aracter.
ENTER — Press to save th e password.
4 High ligh t Rating, th en press th e
button to ch an ge th e ratin g level. DVDs
th at are rated h igh er th an th e level you select will n ot play with out
en terin g th e correct password.
If a password h as already been set, you will n ot be able to select Rating
un til you en ter th e correct password.
5 High ligh t OK, th en press ENTER.
Tips & Tricks
If you forget the Rating password, enter 0106 to unlock the
parental control setting. Keep this password out of reach
of children.
52
Using Gateway
D5 Streaming
Media Server
4
Th e Gateway D5 Stream in g Media Server program lets you
m ake th e m edia files on your com puter available to th e
Gateway Con n ected DVD Player. Media Server m ust be
run n in g on your com puter for th e DVD player to
com m un icate with your com puter.
53
Chapter 4: Using Gateway D5 Streaming Media Server
Compatible file formats
Media Server supports th e followin g m edia form ats:
Format
Supported specification
■
Photo (at least 108 × 171
pixels)
JPG/JPEG
BMP
PSD
PCT
■
■
■
■
TIFF
■
Audio
MP3 (bit rate at least 80 kbps)
WMA (bit rate at least 48 kbps)
■
■
Video (not greater than
3 MB/sec)
MPEG-1 and 2
AVI
DVR-MS
■
■
Starting the program
Durin g in stallation , Media Server was added to your Startup m en u so it loads
autom atically wh en your com puter starts.
To start Media Server:
1 Click th e Gateway D5 Streaming Media Server icon
in th e Win dows system
tray. Media Server open s.
- OR -
D5 Streaming Media Server. Media Server open s.
2 For in form ation about:
■
■
■
■
■
Im portin g m edia files, see page 55.
Workin g with m edia files, see page 58.
Workin g with playlists, see page 60.
Workin g with slidesh ows, see page 63.
Viewin g an d ch an gin g n etwork settin gs, see page 66.
54
Importing media files
Importing media files
You can im port audio, video, an d im age files in to Media Server so th e DVD
player can display or play th em . You can im port files from m edia program s
(such as Win dows Media Player) or directly from your h ard drive.
Important
You can import files only from hard drives, not from
mapped drives or removable media drives. If you have data
on mapped or removable drives that you want to play
through the DVD player, copy the files to your hard drive
and import them from the hard drive.
Importing media directly from your hard drive
To import media:
1 Open Media Server, th en click th e Options tab.
2 In th e File types to scan option area, click th e ch eck boxes for th e m edia
types you wan t to im port.
55
Chapter 4: Using Gateway D5 Streaming Media Server
3 Click th e Media Import tab.
4 Click th e folder con tain in g th e m edia files you wan t to im port.
5 Click Scan. Media files from th e selected folder are im ported in to Media
Server. To stop th e scan before it com pletes, click Stop Scan.
56
Importing media files
Importing media using plugins
You can im port files th at are associated with a m edia player program in to Media
Server. Th is m eth od of im portin g uses a part of th e m edia player’s program
(called a plugin) to im port th e files.
To import files using plugins:
1 Open Media Server, th en click th e Media Import tab.
2 Click Plugin Import. Th e Plugins dialog box open s.
57
Chapter 4: Using Gateway D5 Streaming Media Server
3 Click th e plugin you wan t to use (for exam ple, MusicMatch Jukebox Scanner
or Windows Media Player Scanner), th en click Scan. Media files for th e
selected plugin are im ported in to Media Server.
Tips & Tricks
To import files using more than one plugin, do a separate
import for each plugin.
Scheduling automatic scans
You can sch edule autom atic scan s for im portin g m edia files, or you can set a
tim e in terval for periodic scan s.
To schedule automatic scans:
1 Open Media Server, th en click th e Media Import tab.
2 Click Scheduler. Th e Time Scheduler Options dialog box open s.
3 Click Plugin Selector. Th e Plugins Time Scheduler dialog box open s.
4 From th e Plugin list, click th e plugin you wan t to use.
5 Click th e Update Period you wan t to use:
■
Manual Only (default) — Scan s will n ot be autom atic.
■
Every — Select a preset in terval to scan , from every h our to every
12 h ours.
■
Time — Defin e a tim e of day to start th e scan .
6 Click OK, th en click OK again . Th e scan will occur autom atically at th e tim e
you specified, but on ly wh ile th e com puter is on an d Media Server is
run n in g.
Working with media files
Th e Media Files tab in Media Server displays th e audio, video, an d ph oto files
th at h ave been im ported from your h ard drive in to Media Server. You can list,
h ide, reveal, delete, an d edit file attributes for each file.
58
Working with media files
Listing media files
To list the media files on your hard drive:
1 Open Media Server, th en click th e Media Files tab.
(All)
(Audio)
(Video)
(Ph oto)
If you h ave n ot im ported an y m edia files yet, th e Artist, Album , an d Nam e
pan es are blan k. For in struction s on im portin g m edia, see “Im portin g
m edia files” on page 55.
Editing media file attributes
You can edit th e attributes for all m edia files.
To edit media file attributes:
1 Open Media Server, th en click th e Media Files tab.
2 Click th e button for th e m edia type you wan t to view in th e Albums, Artists,
an d Media lists.
(All)
(Audio)
(Video)
(Ph oto)
3 In th e Media list, righ t-click th e file you wan t to edit th e attributes for, th en
click Edit Media details. On ly on e file can be edited at a tim e.
4 Click Edit. Th e Edit Media Details dialog box open s.
5 Type your ch an ges in th e Filename, Title, Artist, Album, or Genre boxes, th en
click Update.
59
Chapter 4: Using Gateway D5 Streaming Media Server
Deleting media files
You can delete m edia files from Media Server.
To delete media files:
1 Open Media Server, th en click th e Media Files tab.
2 Click th e button for th e m edia type you wan t to view in th e Albums, Artists,
an d Media lists.
(All)
(Audio)
(Video)
(Ph oto)
3 In th e Media pan e, righ t-click th e file you wan t to delete, th en click Delete
from library or Delete From HardDrive. To select m ultiple files, press an d h old
CTRL wh ile clickin g th e file n am es.
4 Click Yes. Th e file is deleted.
■
Important
Subsequent scans of your hard drive will find files that
were only delted from the library.
To prevent media files from reappearing in Media Server,
delete them from your hard drive.
■
Working with playlists
You can create, edit, ren am e, or delete m usic playlists th at can be played
th rough your DVD player. You can also im port playlists from oth er m edia player
program s.
60
Working with playlists
Creating a new playlist
To create a new playlist:
1 To create a n ew playlist, you sh ould first im port m edia. For in struction s,
see “Im portin g m edia files” on page 55.
2 Open Media Server, th en click th e Media Files tab.
3 Click New Playlist. Th e Create New Playlist dialog box open s.
4 Click Music Playlists, th en type a n am e for a list in th e List name box.
5 Click OK. Th e n ew playlist appears in th e Playlists list.
6 To add album or artist tracks, click an d drag th e album s you wan t to in clude
in th e playlist from th e Albums list to th e playlist you created, or click an d
drag th e artists you wan t to in clude in th e playlist from th e Artists list to
th e playlist. Th e tracks are added to th e playlist.
7 To add separate tracks to th e playlist, click th e
button , th en click Add
Files From HardDrive. Navigate to th e folder con tain in g th e files you wan t
to add, click th e files (h old down th e CTRL key to select m ultiple files),
th en click Open. Th e tracks are added to th e playlist.
61
Chapter 4: Using Gateway D5 Streaming Media Server
Editing a playlist
To edit an existing playlist:
1 Open Media Server, th en click th e Media Files tab.
2 Click th e button to display on ly audio m edia.
3 In th e Playlists list, click th e playlist you wan t to edit. Th e files con tain ed
in th e playlist appear in th e Media list on th e righ t side of th e dialog box.
4 Click an d drag th e files to ch an ge th eir order in th e list.
5 To delete a file from th e list, click th e file you wan t to delete, th en click
th e
button . To select m ultiple files, press an d h old CTRL wh ile clicking
th e file n am es.
- OR -
Righ t-click th e file you wan t to delete, th en click Delete from library or Delete
From HardDrive. To select m ultiple files, press an d h old CTRL wh ile clickin g
th e file n am es.
Renaming a playlist
To rename a playlist:
1 Open Media Server, th en click th e Media Files tab.
2 Righ t-click th e playlist you wan t to ren am e, th en click Rename.
3 Type th e n ew n am e, th en press ENTER. Th e n am e is ch an ged.
Deleting a playlist
To delete a playlist:
1 Open Media Server, th en click th e Media Files tab.
2 Righ t-click th e playlist you wan t to delete, th en click Delete. Th e playlist
is deleted.
62
Working with slideshows
Importing a playlist
To import a playlist:
1 Open Media Server, th en click th e Options tab.
2 In th e File types to scan option area, click th e PLS playlist ch eckbox
(Win dows Media Player playlists) or th e M3U playlist ch eckbox
(MusicMatch Jukebox playlists).
3 Click th e Media Import tab.
4 Click Plugin Import. Th e Plugins dialog box open s.
5 Click th e plugin you wan t to use (MusicMatch Jukebox Scanner or Windows
Media Player Scanner), th en click Scan. Playlists for th e selected plugin are
im ported in to Media Server an d appear in th e Media Files tab’s Playlists list.
Working with slideshows
You can create slidesh ows con tain in g im ages an d backgroun d m usic. You can
even im port an d play slidesh ows created in oth er m edia player program s.
Creating a new slideshow
Wh en you create a n ew slidesh ow in Media Server, each im age is displayed for
five secon ds, an d th e im age list starts over again if th e m usic h as n ot com pleted
by th e tim e th e last picture is fin ish ed displayin g.
63
Chapter 4: Using Gateway D5 Streaming Media Server
To create a new slideshow:
1 Open Media Server, th en click th e Media Files tab.
2 Click New Playlist. Th e Create New Playlist dialog box open s.
3 Click Slide Shows, th en type a n am e for th e slidesh ow in th e List name box.
4 Click OK. Th e n ew slidesh ow appears in th e Playlists list.
5 Click th e
button to display on ly ph oto m edia.
6 To add en tire album s to th e slidesh ow, click an d drag th e ph oto album s
you wan t to in clude in th e slidesh ow from th e Albums list to th e slidesh ow
you created. Th e ph otos are added to th e slidesh ow.
7 To add separate ph otos to th e slidesh ow, click th e
button , th en click
Add Files From HardDrive. Navigate to th e folder con tain in g th e files you
wan t to add, click th e files (h old down th e CTRL key to select m ultiple files),
th en click Open. Th e ph otos are added to th e slidesh ow.
8 To add backgroun d m usic to a slidesh ow, click th e
button to display
on ly audio m edia, click th e button , th en click Add Files From HardDrive.
Navigate to th e folder con tain in g th e m usic file you wan t to add, click th e
file, th en click Open. Th e m usic is added to th e slidesh ow.
64
Working with slideshows
Editing a slideshow
To edit an existing slideshow:
1 Open Media Server, th en click th e Media Files tab.
2 Click th e
button to display on ly ph oto m edia.
3 In th e Playlists list, click th e slidesh ow you wan t to edit. Th e files con tain ed
in th e slidesh ow appear in th e Media list on th e righ t side of th e dialog box.
4 Click an d drag th e files to ch an ge th eir order in th e list.
5 To delete a file from th e list, click th e file you wan t to delete, th en click
th e
button . To select m ultiple files, press an d h old CTRL wh ile clicking
th e file n am es.
- OR -
Righ t-click th e file you wan t to delete, th en click Delete from library or Delete
From HardDrive. To select m ultiple files, press an d h old CTRL wh ile clickin g
th e file n am es.
Renaming a slideshow
To rename a slideshow:
1 Open Media Server, th en click th e Media Files tab.
2 Righ t-click th e slidesh ow you wan t to ren am e, th en click Rename.
3 Type th e n ew n am e, th en press ENTER. Th e n am e is ch an ged.
Deleting a slideshow
To delete a slideshow:
1 Open Media Server, th en click th e Media Files tab.
2 Righ t-click th e slidesh ow you wan t to delete, th en click Delete. Th e
slidesh ow is deleted.
65
Chapter 4: Using Gateway D5 Streaming Media Server
Viewing and changing network
settings
You can view an d ch an ge th e followin g in form ation about your com puter’s
n etwork settin gs:
■ Network in form ation
■ Network status
■ Network adapter status
■ Lan guage
Changing the computer name
You can ch an ge th e com puter’s n am e as it appears on th e DVD player m en us.
To change the computer name:
1 On th e com puter you wan t to ch an ge th e n am e for, open Media Server,
th en click th e System tab.
66
Viewing and changing network settings
2 Click Change. Th e New - Server Name dialog box open s.
3 Type th e n am e you wan t, th en click Update Name.
4 Restart your com puter for th e n ew n am e to take affect.
Selecting the network card
If your com puter h as m ore th an on e n etwork adapter card in stalled, you m ust
select th e card to use for th e n etwork con n ected to your DVD player.
To select the network card:
1 Open Media Server, click th e System tab, th en click Change Adapter. Th e
Network Adapters dialog box open s.
2 Click th e appropriate n etwork adapter card, th en click OK.
Changing the language
You can ch an ge th e lan guage for th e Media Server program .
To change the language:
1 Open Media Server, th en click th e Options tab.
2 Click th e Change Language list, th en click th e lan guage you wan t from th e
list.
3 Click Apply. Th e ch an ge in lan guage takes effect th e n ext tim e you start
th e Media Server program .
67
Playing Media 5
Playing discs
Before you begin :
1 Turn on th e player usin g th e POWER button on th e
fron t of th e player. If th e player is in Stan dby power
m ode, press POWER on th e rem ote con trol. Th e Power
LED turn s yellow.
2 Turn on your TV, th en set it to th e audio/video in put
con n ected to th e DVD player.
3 Turn on your audio system (if usin g an extern al
am plifier or audio system ), th en set it to th e audio
in put con n ected to th e DVD player.
69
Chapter 5: Playing Media
To play a disc:
1 Press OPEN/CLOSE on th e rem ote con trol or on th e fron t of th e player. Th e
disc tray open s.
2 Place th e disc in th e tray with th e label side facin g up. If th e disc h as n o
label an d both sides are playable, m ake sure th at th e playback side you
wan t is facin g down .
70
Playing discs
3 Press OPEN/CLOSE to close th e disc tray. Th e disc begin s playin g. If th e disc
is scratch ed, dirty, or if th e DVD is n ot en coded for Region 1, th e disc will
n ot play.
4 If th e disc does n ot autom atically begin playin g, press PLAY
on th e
rem ote con trol or on th e fron t of th e player.
Warning
Always press STOP
to stop playback of a disc before
turning off the player.
5 Press th e followin g rem ote con trol button s for oth er playback features:
Button
Function
Press to freeze at the current frame during playback.
Press again to advance one frame at a time. Press
PAUSE/STEP
PLAY
to resume normal playback.
Press to skip to the previous or next chapter or track.
PREV/NEXT
REV/FWD
Press repeatedly to scan backward or forward at variable
speeds during playback.
Press repeatedly to play in slow motion at variable
speeds.
SLOW
STOP
Press to stop playback, then press PLAY
to resume
playback. Press STOP twice to stop playback and start
over at the main menu.
71
Chapter 5: Playing Media
6 Press th e followin g rem ote con trol button s to n avigate with in disc m en us:
Button
MENU
Function
Press to display the disc menu for the currently loaded
disc.
Press to move the cursor left, right, up, and down in the
disc menu.
Press to make selections in the disc menu.
ENTER
0-9
Press to make direct selections in some disc menus.
Press to display the previous menu or to close the disc
menu.
RETURN
Press to erase a character when entering names in some
menus.
CLEAR
Playing MP3 CDs
You can play MP3 files th at h ave been burn ed (recorded) on to a CD-R or CD-RW.
Important
To ensure proper playback of discs burned from MP3 files,
make sure that the files on the MP3 CD have been
recorded at a bit rate of at least 128 kbps.
If there are any gaps (blank data) on multi-session discs,
you may experience playback problems.
To play an MP3 CD:
1 In sert a CD-R or CD-RW disc con tain in g MP3 files in to th e disc tray. Th e
MP3 m ain m en u open s.
Important
Depending on the number of tracks or folders on the CD,
the player may take up to one minute to read the CD.
If the CD contains multiple folders, only the first folder’s
contents are displayed.
Folder track names are abbreviated to twelve characters.
2 To select a differen t folder, use th e arrow button s to h igh ligh t th e n am e
of th e folder you wan t, th en press ENTER.
72
Playing discs
3 To play a track, use th e arrow button s to n avigate to th e track you wan t,
th en press ENTER.
■
■
■
To m ove up an d down th e track list, press th e
button s.
button s.
or NEXT
To m ove to th e previous or n ext page, press th e
To skip to th e previous or n ext track, press PREV
.
4 To stop playback, press STOP
.
To create a custom playlist for an MP3 CD:
1 High ligh t Browse Disc, th en press ENTER.
2 High ligh t a track you wan t to add to th e playlist, th en press ENTER. Repeat
for each track you wan t to add.
3 Wh en you are fin ish ed, h igh ligh t Create Prog, th en press ENTER. Th e tracks
you selected are displayed.
4 High ligh t th e first track, th en press PLAY to play th e playlist.
Accessing advanced features
Selecting a title
Wh en you play a DVD th at con tain s m ore th an on e title, you can select th e
title you wan t.
To select the title:
1 Press TITLE. Th e DVD’s Title m en u open s. If n o Title m en u open s, th e DVD
does n ot con tain m ultiple titles.
2 Press th e
or 0-9 button s to select a title, th en press ENTER to start
playback.
73
Chapter 5: Playing Media
Repeating a scene or segment
You can repeat an y segm en t of a DVD or CD in defin itely.
To repeat a disc segment:
1 Press A-B durin g playback to select th e startin g poin t (poin t A).
2 Press A-B again to select th e en din g poin t (poin t B). Th e segm en t repeats
in a con tin uous loop.
3 Press A-B again to can cel.
Adjusting the zoom of the image
You can adjust th e zoom (scale) of th e on -screen im age durin g DVD playback.
To adjust the zoom of the DVD image:
■ Press ZOOM repeatedly. Th e size of th e on -screen im age is progressively
in creased, th en zoom turn s off.
Changing angles
Som e DVDs con tain scen es film ed from m ultiple an gles. If addition al an gles
are available for a scen e, th e Angle icon is displayed durin g playback.
To change the selected angle:
1 Press ANGLE wh en you see th e Angle icon appear on screen durin g DVD
playback.
2 Press ANGLE repeatedly to select from all available an gles on th e disc. You
can n ot ch an ge th e an gle settin g durin g VCD playback.
74
Playing discs
Displaying subtitles
On som e DVDs, you can select subtitles in various lan guages.
To change subtitles:
1 Press SUBTITLE durin g DVD playback. Subtitles appear on th e bottom of
th e TV screen .
2 Press SUBTITLE repeatedly to select from all available subtitle lan guages,
or to turn subtitles off.
Selecting audio format
On som e DVDs, you can select from m ultiple audio form ats, such as Dolby
Digital 5.1 or 2-ch an n el stereo. You m ay also be able to select soun dtracks in
m ultiple lan guages.
To select the audio format or soundtrack:
1 Press AUDIO durin g DVD playback. Th e selected audio form at or soun dtrack
ch an ges.
2 Press AUDIO repeatedly to select from all available audio form ats or
soun dtracks.
Searching for a location on the disc
You can jum p to a specific tim e, title, ch apter, or track on th e disc.
To search for a specific location on the disc:
1 Press SEARCH durin g disc playback. Th e Search m en u open s.
2 Press th e
button s to select Time, Title/Chapter, or Track.
3 Press 0-9 to en ter th e tim e, title/ch apter, or track you wan t. Press CLEAR
to delete a ch aracter.
4 Press ENTER to start playback at th e location you specified.
75
Chapter 5: Playing Media
Turning on progressive scan
If you con n ected th e player to your TV usin g th e Com pon en t Out jacks, you
can ch an ge th e video output to Progressive Scan for superior video quality.
To turn on progressive scan:
■ Wh ile playback is stopped, press VIDEO OUT repeatedly to cycle th rough
th e video settin gs un til “Progressive Scan ” appears on th e screen . You n eed
to set th is on ly on ce.
Displaying disc information on the screen
You can select th e type of in form ation to display on th e TV screen durin g DVD
playback.
To select the information to display:
1 Press DISPLAY to view in form ation about th e disc bein g played.
2 Press DISPLAY on ce to view elapsed/rem ain in g tim e.
3 Press DISPLAY again for detailed disc in form ation such as disc type, title
n um ber, ch apter n um ber, an gle n um ber, audio soun dtrack, an d subtitle
lan guage.
4 Press DISPLAY again to turn off th e display.
Selecting audio channels
You can select a specific audio ch an n el from all th e available audio ch an n els.
To select an audio channel:
1 Press AUDIO durin g VCD playback.
2 Press AUDIO repeatedly to select th e audio ch an n el you wan t to h ear, such
as STEREO, LEFT, an d RIGHT.
76
Playing discs
Playing photo CDs
Ph oto CDs con tain JPG im ages th at you can view on your TV.
To view images on a photo CD:
1 In sert a ph oto CD in to th e disc tray. Th e first im age on th e disc displays
on th e TV screen .
2 To display th e previous or n ext im age, press PREV
or NEXT
.
3 To display a specific im age, press th e 0-9 button s to en ter th e im age
n um ber, th en press ENTER.
4 To see th e n um ber of th e curren t im age, press DISPLAY.
5 To view up to 16 th um bn ails of th e pictures per page, press TITLE, press
th e arrow button s to h igh ligh t th e im age you wan t to display, th en press
ENTER.
To manipulate the displayed image:
1 To rotate a picture 180°, press th e
button .
2 To rotate a picture in 90° in crem en ts, press th e ANGLE button .
3 To m agn ify an im age, press ZOOM. Wh ile an im age is m agn ified, press
th e
button s to scroll th e im age.
4 To return to n orm al, press th e
button .
To create a slideshow of images on a photo CD:
1 Press th e
button s to h igh ligh t Browse Disc, th en press ENTER.
2 High ligh t an im age you wan t to add to th e slidesh ow, th en press ENTER.
Repeat for each im age you wan t to add.
3 Wh en you are fin ish ed, h igh ligh t Create Prog, th en press ENTER. A list of
th e pictures you selected is displayed.
4 High ligh t th e first im age, th en press PLAY. Th e slidesh ow plays.
5 To stop th e slidesh ow an d re-open th e m en u, press STOP.
77
Troubleshooting
Th is ch apter provides som e solution s to com m on
n etworkin g an d DVD problem s. If th e suggestion s in th is
ch apter do n ot correct th e problem , see “Gettin g h elp” on
page 84.
Network troubleshooting
■ Make sure th at Gateway D5 Stream in g Media Server is
in stalled an d run n in g on th e com puter.
■ Make sure th at you h ave selected a n etwork card in th e
Media Server program . For m ore in form ation , see
“Selectin g th e n etwork card” on page 67.
79
Chapter 6: Troubleshooting
■ Make sure th at your com puter h as an IP address assign ed to it. To ch eck,
open Media Server, th en click th e About tab.
■ Make sure th at you do n ot h ave a software firewall activated, such as
Norton An tivirus or th e Win dows XP firewall.
When I try to set up a network connection at the player, I get the
message “No Network Card. Please insert a supported card and
restart.”
■ Make sure th at th e n etwork PC Card is in stalled correctly. For m ore
in form ation , see “In stallin g th e n etwork card” on page 17.
■ Make sure th at th e PC Card you are usin g is a supported card. View a list
of supported PC Cards at support.gateway.com .
The DVD player searches for a computer, but cannot find one.
■ Make sure th at th e n etwork PC Card is in stalled correctly. For m ore
in form ation , see “In stallin g th e n etwork card” on page 17.
■ Make sure th at Gateway D5 Stream in g Media Server is run n in g on th e
com puter.
■ Turn th e DVD player off, th en turn it back on again .
No songs are found when I try to import the files into Media Server.
■ Open m usic files in a m edia player program such as Win dows Media Player,
th en im port m usic files in to th e Gateway D5 Stream in g Media Server
program usin g th e appropriate plugin . For m ore in form ation , see
“Im portin g m edia usin g plugin s” on page 57.
A song starts playing, then it stops for no reason.
■ Try to play th e son g again . If th e son g still does n ot start, m ake sure th at
your n etwork con n ection is workin g.
■ If your n etwork uses a wireless access poin t, restart th e access poin t, th en
restart th e switch or router.
Media Server cannot find music files that I know are there.
■ Make sure th at Media Server is in stalled an d run n in g on th e com puter th at
h as th e m usic files.
■ Make sure th at th e son gs are supported form ats (MP3 an d WMA).
80
DVD troubleshooting
■ Son gs m ust m eet th e bit rate requirem en ts (at least 80 kbps for MP3, at
least 48 kbps for WMA). If th e m edia file does n ot m eet th e bit rate
requirem en ts of th e DVD player, th e file is n ot displayed.
■ Make sure th at Media Server is in stalled an d run n in g on th e com puter th at
h as th e picture files.
■ Place all pictures with in a sin gle folder on your com puter, th en im port th e
im ages in to Media Server. For m ore in form ation , see “Im portin g m edia
directly from your h ard drive” on page 55
Media Server cannot find all of my pictures.
■ Make sure th at th e pictures are JPEG or JPG form at.
■ Pictures m ust be at least 171 pixels in width an d 108 pixels in h eigh t.
Media Server cannot find the movies on my hard drive.
■ Make sure th at Media Server is in stalled an d run n in g on th e com puter th at
h as th e m ovie files.
■ Open m ovie files in a m edia player program such as Win dows Media Player,
th en im port th em in to Media Server. For m ore in form ation , see “Im portin g
m edia usin g plugin s” on page 57.
■ Make sure th at th ey are supported m ovie form ats (MPEG-1 an d MPEG-2).
AVI files are n ot supported.
■ MPEGs m ust n ot h ave a display rate greater th an 3 MB/sec.
DVD troubleshooting
The player does not have power.
■ Make sure th at th e AC power cord is securely plugged in to th e wall outlet.
■ Make sure th at th e POWER button on th e fron t of th e player is pressed in .
■ Make sure th at th e player is n ot in sleep m ode (press POWER on th e rem ote
con trol).
No picture appears on my TV.
■ Make sure th at th e video cables are securely plugged in to th e player an d
th e TV.
81
Chapter 6: Troubleshooting
■ If th e video cables are dam aged, replace th em .
■ Make sure th at th e player is con n ected to th e correct TV in put.
■ Make sure th at th e video in put on th e TV is set to view th e DVD player.
■ Make sure th at video is set to th e correct m ode. Press th e VIDEO OUT button
on th e rem ote con trol un til a picture is visible.
The picture on my TV has a lot of static, or “noise”
■ Make sure th at th e DVD is n ot dirty or flawed.
■ If th e picture output from your player goes th rough your VCR to get to
experien ce problem s, try con n ectin g your player to your TV’s S-Video
in put.
The DVD picture does not fill the screen on my standard television.
■ Ch an ge th e aspect ratio. For m ore in form ation , see “To set th e aspect ratio:”
on page 38.
■ If th e picture does n ot ch an ge, th e DVD’s aspect ratio m ay be fixed an d
can n ot be adjusted.
No sound plays while playing media through the player.
■ Make sure th at all audio cables are securely plugged in .
■ If an y audio or speaker cables are dam aged, replace th em .
■ Make sure th at th e volum e is turn ed up on your TV.
■ Make sure th at th e player’s audio settin gs m atch your TV an d audio system
settin gs.
■ Th e player m ay be in Pause, Slow Motion , or Forward/Reverse Scan m ode.
Press PLAY on th e rem ote con trol to return to n orm al playback m ode.
There is no surround effect during playback of Dolby Digital
soundtrack.
■ Make sure your audio cables are correctly con n ected. For m ore
in form ation , see “Con n ectin g th e player” on page 15.
■ Depen din g on th e DVD, th e audio output m ay n ot use all 5.1 ch an n els,
but in stead output m on o or stereo soun d, even if th e soun dtrack is
recorded in Dolby Digital form at.
82
DVD troubleshooting
I keep hearing a loud hum or noise.
■ Make sure th at all com pon en ts in your audio system are securely
plugged in .
■ Make sure th at you keep your audio system ’s cables away from a
tran sform er or m otor, an d th at you keep th em at least 10 feet away from
a TV or fluorescen t ligh ts.
■ Move your TV away from your audio com pon en ts.
■ Th e plugs an d jacks m ay be dirty. Un plug th em , th en wipe th em clean with
a cloth sligh tly m oisten ed with isopropyl alcoh ol.
■ Clean th e DVD.
The remote control does not work.
■ Poin t th e rem ote con trol directly at th e sen sor on th e fron t of th e player.
■ Rem ove an y obstacles between th e rem ote con trol an d th e player.
■ Move closer to th e player wh en usin g th e rem ote con trol.
■ Replace th e batteries.
The DVD does not play.
■ Make sure th at th ere is a DVD in th e tray.
■ If th e DVD h as two playable sides, m ake sure th at th e side you wan t to
play is facin g down in th e tray.
■ Th e DVD m ay be warped an d un playable.
■ Th e region code on th e DVD m ay n ot be Region 1.
■ Moisture m ay h ave con den sed in side th e player. Rem ove th e DVD an d
leave th e player turn ed on for about h alf an h our to dry th e con den sation .
The DVD does not start playing from the beginning.
■ Resum e Play is active. Press STOP twice, th en restart DVD playback.
When I play a DVD, the voice audio is really quiet, but the music is
really loud.
■ Your player m ay be outputtin g a 5.1-ch an n el soun d sign al, wh ile you h ave
on ly stereo speakers con n ected. Ch eck your audio settin gs an d speaker
con n ection s.
83
Chapter 6: Troubleshooting
Getting help
If th e troublesh ootin g in form ation in th is ch apter does n ot solve your problem ,
con tact Gateway Tech n ical Support at 800-846-2301, Mon day th rough Friday,
from 7:00 a.m . to 9:00 p.m . Cen tral Tim e.
TDD tech n ical support (for th e h earin g im paired) is available weekdays from
6:00 a.m . to 8:00 p.m . Cen tral Tim e, an d weeken ds from 6:00 a.m . to 5:00 p.m .
Cen tral Tim e.
84
Specifications A
Video
Video Out
1.0Vp-p 75Ω sync, negative polarity, RCA pin
jack (1)
S-Video Out
Y: 1.0Vp-p 75Ω sync, negative polarity
(separate Y and C
signal output)
C: 0.286Vp-p 75Ω
Component Video
Out (progressive/
interlace scan modes) Cr: 0.7Vp-p 75Ω
Y: 1.0Vp-p 75Ω
Cb: 0.7Vp-p 75Ω
Supported video and
image formats
MPEG1: <3 Mbps
MPEG2: <3 Mbps
JPEG/JPG: >25 Kbps
Audio
Analog Out
Coaxial Out
1.85V(rms)/10kΩ RCA L/R pin jack (1)
0.5Vp-p 75Ω; RCA pin jack (1)
85
Chapter A: Specifications
Optical Out
Optical fiber transmitter
20 Hz to 20 kHz
90 dB
Frequency response
Signal-to-noise ratio
Total harmonic
distortion
Less than 0.05%
Supported audio
formats
WMA: >48 Kbps
MP3: >80 Kbps
General
Power requirements
Power consumption
Video standard
120 VAC, 60 Hz
<25 W
NTSC
Weight (approximate)
5.5 lbs. (2.5 kg)
Dimensions
(approximate)
DVD player: 16.9 × 11.6 × 2.2 inches
(430 × 295 × 55 mm)
Remote control: 7.3 × 1.8 × 1 inches
(185 × 45 × 25 mm)
86
Safety,
Regulatory, and
Legal Information B
Regulatory compliance
statements
United States of America
Federal Communications Commission (FCC)
Unintentional emitter per FCC Part 15
Th is device h as been tested an d foun d to com ply with th e lim its for a
Class B digital device, pursuan t to Part 15 of th e FCC rules. Th ese lim its
are design ed to provide reason able protection again st h arm ful
in terferen ce in a residen tial in stallation .
87
Appendix A: Safety, Regulatory, and Legal Information
Th is equipm en t gen erates, uses, an d can radiate radio frequen cy en ergy an d, if n ot in stalled an d
used in accordan ce with th e in struction s, m ay cause h arm ful in terferen ce to radio or television
reception . However, th ere is n o guaran tee th at in terferen ce will n ot occur in a particular
in stallation . If th is equipm en t does cause in terferen ce to radio an d television reception , wh ich can
be determ in ed by turn in g th e equipm en t off an d on , th e user is en couraged to try to correct th e
in terferen ce by on e or m ore of th e followin g m easures:
■
Reorien t or relocate th e receivin g an ten n a
■
In crease th e separation between th e equipm en t an d receiver
■
Con n ect th e equipm en t to an outlet on a differen t circuit from th at to wh ich th e receiver is
con n ected
■
Con sult th e dealer or an experien ced radio/TV tech n ician for h elp.
Com plian ce Accessories: Th e accessories associated with th is equipm en t are: sh ielded video cable.
Th ese accessories are required to be used in order to en sure com plian ce with FCC rules.
Caution
Changes or modifications not expressly approved by
Gateway could void the FCC compliance and negate your
authority to operate the product.
Canada
Industry Canada (IC)
Unintentional emitter per ICES-003
Th is digital apparatus does n ot exceed th e Class B lim its for radio n oise em ission s from digital
apparatus as set out in th e radio in terferen ce regulation s of In dustry Can ada.
Le présen t appareil n um érique n ’ém et pas de bruits radioélectriques dépassan t les lim ites
applicables aux appareils n um ériques de Classe B prescrites dan s le règlem en t sur le brouillage
radioélectrique édicté par In dustrie Can ada.
Laser safety statement
All Gateway system s equipped with CD an d DVD drives com ply with th e appropriate safety
stan dards, in cludin g IEC 825. Th e laser devices in th ese com pon en ts are classified as “Class 1 Laser
Products” un der a US Departm en t of Health an d Hum an Services (DHHS) Radiation Perform an ce
Stan dard. Sh ould th e un it ever n eed servicin g, con tact an auth orized service location .
Warning
Use of controls or adjustments or performance of
procedures other than those specified in this manual may
result in hazardous radiation exposure. To prevent
exposure to laser beams, do not try to open the enclosure
of a CD or DVD drive.
88
Notices
Macrovision statement
If your computer has a DVD drive and an analog TV Out port, the following paragraph applies:
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
California Proposition 65 Warning
Warning
This product contains chemicals, including lead, known to
the State of California to cause cancer and/or birth defects
or reproductive harm.
Notices
Copyright © 2003 Gateway, Inc.
All Rights Reserved
14303 Gateway Place
Poway, CA 92064 USA
All Rights Reserved
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or
transmitted by any means or in any form, without prior consent in writing from Gateway.
The information in this manual has been carefully checked and is believed to be accurate. However, changes are
made periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or
change products described in this publication at any time. Due to continuing system improvements, Gateway is
not responsible for inaccurate information which may appear in this manual. For the latest product updates,
consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect, special,
exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages.
In the interest of continued product development, Gateway reserves the right to make improvements in this
manual and the products it describes at any time, without notices or obligation.
Trademark Acknowledgments
1-800-GATEWAY, ActiveCPR, ALR, AnyKey, black-and-white spot design, CrystalScan, Destination, DestiVu, EZ
Pad, EZ Point, Field Mouse, Gateway 2000, Gateway Country, gateway.net, Gateway stylized logo, Perfect
Scholar, Solo, TelePath, Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are
registered trademarks and black-and-white spotted box logo, GATEWAY, Gateway Astro, Gateway@Work,
Gateway Connected touch pad, Gateway Connected music player, Gateway Cyber:)Ware, Gateway
Education:)Ware, Gateway Flex Case, Gateway Gaming:)Ware, Gateway GoBack, Gateway Gold, Gateway
Learning:)Ware, Gateway Magazine, Gateway Micro Server, Gateway Money:)Ware, Gateway Music:)Ware,
Gateway Networking Solutions, Gateway Online Network (O.N.) solution, Gateway Photo:)Ware, Gateway
89
Appendix A: Safety, Regulatory, and Legal Information
Professional PCs, Gateway Profile, Gateway Solo, green stylized GATEWAY, green stylized Gateway logo,
Gateway Teacher:)Ware, Gateway Video:)Ware, HelpSpot, InforManager, Just click it!, Learn@Gateway, Kids
BackPack, SERVE-TO-ORDER, Server Watchdog, the Spotted G Gateway Logo and the Spotted G Logo,
SpotShop, Spotshop.com, and Your:)Ware are trademarks of Gateway, Inc. Intel, Intel Inside logo, and Pentium
are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows
are trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned herein are
used for identification purposes only, and may be the trademarks or registered trademarks of their respective
companies.
90
MAN CONNECT DVD PLAYER GDE R2 8/03
|