Owner’s Manual
Please read before using this unit.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
DVD/CD Player
Contents
DP100HH8 A
PRECAUTIONS
Supplied Accessories
■ Important Safeguards .................................................. .2
■ About the Discs............................................................ .5
Playable Discs................................................................ .5
Unplayable Discs............................................................ .5
remote control
(NB094UD)
RCA audio/video
cables
owner’s manual
(1VMN24994)
batteries (AA x2) (WPZ0102TM018/
WPZ0102LTE01)
STANDBY-ON
OPEN/CLOSE
SEARCH
MODE
DISPLAY
AUDIO
SUBTITLE
ANGLE
1
2
5
8
0
3
SETUP
4
6
7
9
REPEAT
CLEAR
+10
A-B
PAUSE
SKIP
Owner's Manual
■ Connections.................................................................. .6
Connection to a TV......................................................... .6
Connection to an Audio System..................................... .7
Rear Terminals............................................................... .7
■ About the Remote Control........................................... .8
Remote Control .............................................................. .8
Installing the Batteries for the Remote Control .............. .8
PLA
Y
REV
FWD
STOP
OP MENU
SETUP
MODE
ZOOM
T
MENU
ENTER
RETURN
Connecting to RF Modulator (Not Supplied)
If your TV has antenna in jack only, it is still possible
to connect this unit to your TV by using an RF
modulator. In this case, follow the instructions below.
DVD FUNCTIONS
■ Playback........................................................................ .9
■ MP3 Playback............................................................... .10
■ Search Functions ........................................................ .10
Using Track Search....................................................... .10
Using Title / Chapter Search ......................................... .10
Using Time Search........................................................ .10
■ On-Screen Display....................................................... .11
■ Repeat / Random / Programmed Playback............... .12
Repeat Playback ........................................................... .12
Repeat A-B Playback .................................................... .12
Random Playback ......................................................... .12
Programmed Playback .................................................. .12
■ Special Settings........................................................... .13
Subtitle Language.......................................................... .13
Audio Language ............................................................ .13
Camera Angles.............................................................. .13
Black Level Setting........................................................ .13
Stereo Sound Mode....................................................... .13
Virtual Surround............................................................. .13
■ DVD Setting.................................................................. .14
LANGUAGE Setting ...................................................... .14
DISPLAY Setting ........................................................... .15
AUDIO Setting............................................................... .15
PARENTAL Setting ....................................................... .16
OTHERS Setting ........................................................... .16
Reset to the Default Setting
1) Disconnect the power cords of the devices from
the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to
either 3 or 4, whichever the TV channel is least
used in your area. If your RF modulator has a
modulator/antenna switch, set it according to the
manual supplied with the RF modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel
as you set the RF modulator’s channel 3/4
switch to. For more details, follow the manual
supplied with the RF modulator.
rear of this unit
CB/PB
Y
L
DIGITAL
AUDIO OUT
R
CR/PR
VIDEO AUDIO COAXIAL
OUT
OUT
S-VIDEO OMPONE
OUT VIDEO OUT
RCA video cable
L
R
rear of TV
VIDEO
OUT
AUDIO
OUT
RCA audio cable
ANT. IN
rear of your RF
modulator
VHF / UHF
antenna
RF coaxial cable
or
3
4
R
L
ANT. IN CHANNEL
AUDIO IN VIDEO IN TO TV
RF coaxial
cable
cable TV
company
Set channel 3 or 4
(Except for PARENTAL Setting).................................... .17
INFORMATION
Note:
■ Troubleshooting Guide............................................... .17
■ Specifications .............................................................. .18
■ LIMITED WARRANTY .................................................. .18
■ Español......................................................................... .19
■ Quick Use Guide............................................ Back Cover
• RF modulator is not supplied with this unit. You need to
purchase it at your local store.
• The quality of picture may become poor if this unit is
connected to an RF modulator.
If you need additional operating assistance
after reading this owner’s manual, please call
TOLL FREE : 1-800-317-6062
or visit our web site at
© 2008 Funai Electric Co., Ltd.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may
cause harmful interference unless the modifications are expressly approved in the manual. The user could lose
the authority to operate this apparatus if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does
cause harmful interference to radio or television reception, which can be determined by turning the apparatus off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the
grounding system of the building as close to the point of cable entry as practical.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service
this apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product
incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
EN
–
–
3
MAINTENANCE
TO AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from an AC outlet. Grasp it by the plug.
Servicing
• Please refer to relevant topics on the “Troubleshooting
Guide” on page 17 before returning the unit.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our help line mentioned on the front page to locate an
authorized service center.
• Do not put your fingers or objects into the unit.
LOCATION AND HANDLING
• Do not install the unit in direct sunlight, near strong
magnetic fields, or in a place subject to dust or
strong vibration.
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position.
Do not place anything directly on top or bottom of
the unit. Depending on your external devices, noise
or disturbance of the picture and/or sound may be
generated if the unit is placed too close to them. In
this case, please ensure enough space between the
external devices and the unit.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
• Depending on the environment, the temperature
of this unit may increase slightly. This is not a
malfunction.
Cleaning the Disc Lens
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this owner’s manual, the laser optical pickup unit may be
dirty. Consult your dealer or an authorized service center
for inspection and cleaning of the laser optical pickup unit.
TRADEMARK INFORMATION
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
Disc Handling
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when not in
use.
Product that have earned ENERGY STAR®
are designed to protect the environment
through superior energy efficiency.
is a trademark of DVD Format/Logo
Licensing Corporation.
DEW CONDENSATION WARNING
• Dew condensation may form inside the unit in the
following conditions. If so, do not use this unit at
least for a few hours until its inside gets dry.
- The unit is moved from a cold place to a warm
place.
- Under conditions of high humidity.
- After heating a cold room.
© 2008 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be
reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form
or for any purpose without the express prior written consent
of Funai. Furthermore, any unauthorized commercial
distribution of this manual or any revision hereto is strictly
prohibited.
NOTE ABOUT RECYCLING
• This unit’s packaging materials are
recyclable and can be reused. Please
dispose of any materials in accordance
with your local recycling regulations.
• Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
Information in this document is subject to change without
notice. Funai reserves the right to change the content
herein without the obligation to notify any person or
organization of such changes.
SYMBOLS USED IN THIS MANUAL
with the
design is a registered trademark of
The following symbols appear in some headings in this
Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other
trademarks used herein remain the exclusive property
of their respective owners. Nothing contained in this
manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks
displayed herein. Misuse of any trademarks or any other
content in this manual is strictly prohibited. Funai shall
aggressively enforce its intellectual property rights to the
fullest extent of the law.
manual.
: Description refers to DVD-video.
: Description refers to audio CD.
: Description refers to CD-RW/-R with MP3 files.
EN
–
–
4
About the Discs
Playable Discs
Type of
Recorded
signals
Disc
size
Mark (logo)
media
Region code
Disc types
DVD-video
*1, 2, 4, 6, 9
or
5 inches
(12 cm)
or
3 inches
(8 cm)
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
7, 8, 9
e.g.)
title 1
title 2
digital video
(MPEG2)
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1
chapter 2
DVD+RW
DVD+R
*1, 4, 5, 6,
8, 9
audio CD
MP3
audio CD
*4, 6, 9
e.g.)
digital audio
track 1
track 2
track 5
track 6
track 3
track 4
5 inches
(12 cm)
or
3 inches
(8 cm)
CD-RW
CD-R
*4, 5, 6, 8, 9,
digital audio
e.g.)
folder 1
folder 2
or
MP3
file 1
file 3
file 2
file 4
file 1
file 2
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played
back.
*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or
special properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them
back. Even if they are played back, the sound or video quality will be compromised.
*7: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot be played back.
Depending on the recording status of a disc, the disc may not be played back at all. The picture or sound may not be
smooth, etc.
*8: If the recorded portion of the disc is too small (smaller than 2-3/16 inches (55mm) across), it may not be played back.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable Discs
NEVER play back the following discs as malfunction may result!
DVD-RAM / DVD-audio / CD-i / photo CD / video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM
for personal computers / CD-ROM for personal computers / HD DVD / Blu-ray Disc
On the following disc, the sound MAY NOT be heard.
super audio CD
Any other discs without compatibility indications
Note:
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio
CD layer cannot be delivered.
EN
–
–
5
SETUP
Connections
Connection to a TV
Method 1
Method 2
Method 3
TV
analog audio
standard picture
good picture
better picture
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
AUDIO IN
Y
Y
VIDEO IN
S-VIDEO IN
R
L
C
B
R
P
B
R
or
C
P
and
or
or
RCA video
cable
S-video cable
component
video cable
RCA audio
cable
This unit
L
Y
CB/PB
C
B/PB
Y
L
L
DIGITAL
DIGITAL
AUDIO OUT
AUDIO OUT
R
R
R
C
R/PR
VIDEO
OUT
AUDIO COAXIAL
OUT
S-VIDEO COMPONENT
OUT VIDEO OUT
VIDEO
OUT
C
R/PR
AUDIO COAXIAL
OUT
AUDIO
OUT
COMPONENT
VIDEO OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Connect this unit directly to the TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE”
to “ON” in “DISPLAY” menu, so that the P-SCAN indicator on the front panel lights up. Refer to pages 14-15 for more
details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or
not be output at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding
[PLAY B] on the front of the unit for more than 5 seconds, so that the P-SCAN indicator on the front panel turns off.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s manual for details.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
Hitachi:
JVC:
AUX
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEO3
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
AUX CHANNEL
Sony:
Toshiba:
Zenith:
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
EN
–
–
6
Connection to an Audio System
Analog Audio Connection
Digital Audio Connection
stereo system
Audio
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
analog audio
input jacks
digital audio
input jack
L
R
digital audio
coaxial cable
DIGITAL
AUDIO OUT
RCA audio cable
DIGITAL
COAXIAL
AUDIO OUT
This unit
SETUP > AUDIO>
DOLBY DIGITAL
Setting
Connection
L
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
AUDIO OUT
BITSTREAM
PCM
R
AUDIO
OUT
Connecting to the other device
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
* To complete these settings, refer to pages 14-15.
Note:
• The audio source on a disc in a Dolby Digital
multi-channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you
can enjoy high-quality Dolby Digital multi-channel
surround sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
Supplied cables used in this connection are as
follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables
at your local store.
Rear Terminals
1
2
4
5
Y
C
B/PB
L
DIGITAL
AUDIO OUT
R
C
R/PR
VIDEO
OUT
AUDIO COAXIAL
OUT
S-VIDEO COMPONENT
OUT VIDEO OUT
3
1
S-VIDEO OUT jack
Connect an optional S-video cable here through the S-video in jack of a television.
2
3
4
5
COMPONENT VIDEO OUT jacks
Connect optional component video cable here through the component video in jacks of a television.
VIDEO OUT jack
Connect a yellow video cable here through the video in jack of a television.
AUDIO OUT jacks
Connect an audio cable here through the audio in jacks of a television or other audio device.
DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable here through the digital audio coaxial in jack of a decoder or audio receiver.
Note:
• Please purchase the necessary cables at your local store. (Refer to pages 6-7.)
EN
–
–
7
About the Remote Control
Media
Remote Control
Button
(Alphabetical order)
1
4
7
2
5
8
0
3
6
• To select track directly. (CD)
• To select folder/file directly.
(MP3)
• To select chapter or title
directly.
OPEN/CLOSE
STANDBY-ON
SEARCH
MODE
9
DISPLAY
+10
AUDIO
SUBTITLE
ANGLE
REPEAT
1
4
2
5
8
0
3
6
ENTER
• To move the cursor and deter- • To move the cursor and deter-
mine its position.
mine its position.
7
9
CLEAR
+10
A-B
• To repeat between your cho-
sen point of A and B.
• To repeat between your cho-
sen point of A and B.
-
A
B
SKIP
PAUSE
ANGLE
AUDIO
• To select camera angles on
a disc.
PLAY
------
REV
FWD
STOP
TOP MENU
• To select audio language on
a disc.
• To select “STEREO”, “L-ch” or
“R-ch”. (CD)
SETUP
MODE
ZOOM
MENU
ENTER
• To remove status number in
program input.
• To remove status number in
program input.
RETURN
CLEAR
• To clear the numbers entered • To clear the numbers entered
incorrectly.
incorrectly.
• To cancel the point for A-B
repeat.
• To cancel the point for A-B
repeat.
DISPLAY
• To display the current disc
mode.
• To display the current disc
mode.
• To search forward/backward
through a disc.
• To begin slow forward play-
back in the pause mode.
• To search forward/backward
through a disc.
REV
FWD
Installing the Batteries for the
Remote Control
MENU
MODE
• To call up the menu on a disc.
------
• To arrange the playing order
or play randomly.
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing order
or play randomly.
• To set virtual surround on/off.
Install batteries (AA x2) matching the
polarity indicated inside battery com-
partment of the remote control.
OPEN/CLOSE
PAUSE
• To open or close the disc tray. • To open or close the disc tray.
1
2
3
• To turn on the unit.
• To turn on the unit.
• To pause disc playback.
• To advance playback one
frame at a time.
• To pause disc playback.
• To begin disc playback.
• To turn on the unit.
• To begin disc playback.
• To turn on the unit.
PLAY
Keep in mind the following when using
the remote control:
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or
disc repeatedly. (MP3)
• Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from
the unit are as follows.
REPEAT
• To play back a chapter or title
repeatedly.
RETURN
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
-Line of sight:
SEARCH
MODE
• To search tracks.
• To search chapter, title or
time.
approx. 23 feet (7m)
• To search time. (CD)
• To search folders. (MP3)
-Either side of the center:
approx. 16 feet (5m) within 30°
-Above: approx. 16 feet (5m) within 15°
-Below: approx. 10 feet (3m) within 30°
P-SCAN
SETUP
SKIP
• To call up the setup menu.
• To skip chapters or titles.
• To call up the setup menu.
• To skip tracks. (CD)
• To skip folders or files. (MP3)
OPEN/CLOSE PLA
Y
STOP POWER
STANDBY-ON
• To turn the unit on/off.
• To turn the unit on/off.
STOP
• To stop playback.
• To stop playback.
SUBTITLE
Note:
• To select subtitles on a disc.
------
------
• Do not mix alkaline and manganese
batteries.
TOP MENU
ZOOM
• To call up the top menu on
a disc.
• Do not mix old and new batteries.
• Always remove batteries from
remote control if they are dead or if
the remote control is not to be used
for an extended period of time. This
will prevent battery acid from leaking
into the battery compartment.
• To magnify part of a picture.
(2x / 3x / 4x / 1/2x)
------
EN
–
–
8
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Before:
Lights up when power is on.
Turn on the TV, amplifier and any other
devices which are connected to this unit.
Make sure the TV and audio receiver are
set to the correct channel.
P-SCAN
OPEN/CLOSE PLAY STOP POWER
2
2
2 3 4 1
2
1
STANDBY-ON
OPEN/CLOSE
SEARCH
⇒
DISPLAY
MODE
on page 10
Note:
(
)
• When you play back a CD-RW/-R with MP3
files, details on page 10.
AUDIO
SUBTITLE
ANGLE
REPEAT
1
4
2
5
8
0
3
6
Press [STANDBY-ON] to turn on
this unit.
1
• A “ ” may appear at the top-right on the TV
screen when the operation is prohibited by the
disc or this unit.
7
9
CLEAR
Press [OPEN / CLOSE A] and
insert a disc with label facing up.
2
+10
• Some DVD may start playback from title 2 or 3 due to
specific programs.
-
A
B
SKIP
PAUSE
• During the playback of a 2-layered disc, pictures may
stop for a moment. This happens while the 1st layer is
being switched to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “PLAYER
MENU” setting. (Refer to page 14.)
3
4
Press [PLAY B] to start playback.
3
4
PLAY
REV
FWD
STOP
Press [STOP C] to stop playback.
Disc Menu
Fast Forward / Reverse Search
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Use [FWD g] or [REV h] repeatedly
during playback to select the required
E
1
forward or reverse speed.
To continue playback, press [PLAY B].
Calling Up a Menu Screen during Playback
Note:
• Fast forward or reverse search speed is different
depending on the disc. Approximate speed is 1(2x), 2(4x),
3(8x), 4(16x) and 5(32x).
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
Slow Forward Search
Note:
• Menu operations may vary depending on the disc. Refer
to the manual accompanying the disc for more details.
Press [FWD g] repeatedly in the pause
mode to select the required forward speed.
Resume Playback
1
To continue playback, press [PLAY B].
Press [STOP C] during playback. Resume icon
Note:
will appear at the top-left on the TV screen.
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and
5(1/2).
R.STOP
Press [PLAY B], playback will resume from
the point at which playback was stopped.
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the slow playback mode are blurred. (Refer to
pages 14-15.)
• The reverse of slow playback is not available.
Zoom
Note:
•
To cancel resume, press [STOP C] one more time in the
stop mode.
•
For MP3, playback will resume from where you stopped (if
the power has been turned off, the playback will start from
the beginning of the track).
•
The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: 2x, 3x, 4x, 1/2x or off.
x2
x3
x4
x1/2
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
PAUSE
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
3) To exit zoom function, press [ZOOM] repeatedly to select
OFF.
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Note:
•
Zooming function does not work while the disc menu is
displayed.
Note:
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the pause mode are blurred. (Refer to pages
14-15.)
• Some part of the picture may not be zoomed depending
on the disc or playback status.
EN
–
–
9
MP3 Playback
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the
computer and play back the files on this unit.
Note:
• Some selections may take a while to
be recognized.
• Folders are known as groups; files are
known as tracks.
Insert a CD-RW/-R with MP3 files, then the file list will automatically appear on the TV
screen.
3
• MP3 files are accompanied by
• Folders are accompanied by
• Refer to “On-Screen Display” on
page 11 for more details.
icon.
icon.
1
Select the desired folder from the list
on the left side in the file list.
2 Select the desired file from the list on
the right side in the file list.
• If you record data over 20 times, it may
not be played back correctly.
This unit recommends the files recorded
under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 32kbps ~ 320kbps.
004/027
001/013
file name1
00:00:36
OFF
001/027
001/007
00:00:12
OFF
ENTER
ENTER
file name11
3
3
3
3
3
3
3
3
3
1. folder1
2. folder2
3. folder3
4. folder4
5. folder5
6. folder6
7. folder7
8. folder8
1. file name1
1. folder1
2. folder2
3. folder3
4. folder4
5. folder5
6. folder6
7. folder7
8. folder8
1. file name11
2. file name12
3
3
3
3
3
3
2. file name2
3. file name3
4. file name4
5. file name5
6. file name6
7. file name7
8. file name8
3. file name13
4. file name14
5. file name15
6. file name16
7. file name17
3 Refer to “Resume Playback” on
ENTER
ENTER
page 9.
or
or
PLAY
PLAY
Press [ENTER]
or [PLAY B] .
STOP
Search Functions
Using Track Search
Using Title / Chapter Search
Using Time Search
Using [SEARCH MODE]
1
OFF
Using [SEARCH MODE]
1
1
PLAY
03/24
001/002
--:
--
:
--
OFF
--/26
00:00:19
OFF
SEARCH
MODE
SEARCH
MODE
--/24
001/002
00:00:30
SEARCH
MODE
e.g.) DVD
e.g.) CD
or
Press cursor [B]
2 Enter the desired track number
ENTER
to highlight
.
within 5 seconds.
ENTER
1
4
7
2
5
8
0
3
CD: once
DVD: twice
--/26
00:00:19
OFF
6
Press [SEARCH MODE] once for
the title search.
9
+10
For the chapter search, press
2 Enter the desired time within 5
cursor [B] to highlight
.
ENTER
3 Press [ENTER].
seconds.
1
4
7
2
5
8
0
3
6
9
2 Enter the desired title or chapter
03/24
001/002
--
:
--
:
--
OFF
• To play back a double-digit track, press
the track number directly (e.g. for track
14, press [1], [4] and [ENTER]).
• To play back a triple-digit track, press
the track number directly for MP3.
(e.g. for track 114, press [1], [1], [4]
and [ENTER]).
number within 5 seconds.
1
4
7
2
5
8
0
3
e.g.) DVD
6
03/24
---/002
00:00:32
OFF
9
+10
ENTER
3 Press [ENTER].
ENTER
3 Press [ENTER].
Note:
Using [SKIP H , G]
• To play time 0:15:00, press [1], [5],
[0], [0] of [the Number buttons].
• Press [CLEAR] to erase the
incorrect input at step 2.
Using [SKIP H , G]
1
PLAY
Current Track
1
• For DVD and audio CD, time search
is not available for programmed or
random playback.
TR 1 TR 2 TR 3 TR 4
SKIP
PLAY
Current Chapter
SKIP
SKIP
CH 1 CH 2 CH 3 CH 4
SKIP SKIP
SKIP
Note:
• For audio CD, track search is not
available for programmed or random
playback.
Note:
• Depending on the disc being played
back, this function can also be performed
by directly entering the desired chapter
number with [the Number buttons].
Refer to the manual accompanying the
disc.
• For DVD, title/chapter search is not avail-
able for programmed or random playback.
EN
–
–
10
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
T(Title):
current title number / total
titles
TR(Track):
current track number /
total tracks
elapsed time of the
current title
current repeat setting
03/24
001/002
00:00:40
OFF
01/26
00:00:11
OFF
1
1
2
current repeat setting
elapsed time of the cur-
rent track
DISPLAY
DISPLAY
C(Chapter):
current chapter number /
total chapters
CH(Chapter):
current chapter number /
total chapters
TR(Track):
current track number /
total tracks
remaining time of the
current chapter
remaining time of the
current track
001/002 00:00:19 - 00:01:11
NORMAL
01/26
00:00:12 - 00:03:20
NORMAL
2
3
current play mode setting
current play mode setting
DISPLAY
DISPLAY
elapsed time of the cur-
rent track
elapsed time of the
current chapter
TT(Title):
current title number / total
titles
remaining time of the
current title
ALL:
current track number / total
tracks
remaining time of the
entire disc
3
4
03/24
00:00:20 - 00:01:09
NORMAL
01/26
00:00:14 - 01:11:28
NORMAL
current play mode setting
elapsed time of entire disc
current play mode setting
DISPLAY
DISPLAY
elapsed time of the
current title
4
Note:
current folder number /
total folders
current file number / total
files in the current folder
•
Some DVD will not allow you to set chapter playback
correctly.
elapsed time of the
current file
current repeat setting
004/027
001/013
00:00:36
OFF
1
file name1
3
1. folder1
2.
1. file name1
2. file name2
ie
DISPLAY
TR(Track):
current file number / total
files in the current folder
elapsed time of the
current file
remaining time of the
current file
current play mode setting
001/013 00:00:43 - 00:03:36
NORMAL
2
3
file name1
3
1. folder1
2.
1. file name1
2. file name2
3
DISPLAY
file name1
3
3
1. folder1
2. fo
1. file name1
2. file name2
EN
–
–
11
Repeat / Random / Programmed Playback
Repeat Playback
Repeat A-B Playback
Programmed Playback
Repeat function is available only during
playback.
You may determine the order in which
chapters or tracks will play back.
1
PLAY
1
1 Press [MODE] once during stop
A-
mode.
PLAY
A-B
CHAPTER
MODE
NORMAL
RANDOM
PROGRAM
REPEAT
at your desired starting point (A)
e.g.) DVD
• During playback, press [MODE].
2
Each time you press [REPEAT], repeat
function changes as example below.
CD/MP3: twice
A-B
A-B
DVD:
three times
2 Select “PROGRAM”.
Then press [ENTER].
at your desired ending point (B)
• Point B should be in the same title
or track as point A.
(repeat off)
OFF
ENTER
ENTER
(current chapter repeat)
(current title repeat)
CHAPTER
TITLE
Note:
• To exit the sequence, press [A-B]
DVD-PROGRAM
MAX:
2
so that “OFF” appears.
To cancel point A, press [CLEAR] at
step 1.
Total:
3
TITLE CHAPTER PLAY ALL CLEAR
1
4
7
2
5
8
0
3
6
•
02 007
05 005
01 002
-- --- -- --- -- ---
-- --- -- --- -- ---
-- --- -- --- -- ---
• This function does not work in the
other repeat modes.
9
(repeat off)
OFF
-- --- -- --- -- --- -- ---
-- --- -- --- -- --- -- ---
+10
TRACK
ALL
(current track repeat)
(entire disc repeat)
Random Playback
e.g.) DVD
• Up to 20 chapters or tracks can
be ordered.
• Enter the desired number with
[the Number buttons].
DVD: title and chapter number
CD: track number
This function shuffles the playing
order of chapters or tracks instead
of playback in the sequence.
(repeat off)
OFF
1 Press [MODE] once during stop
MP3: folder and file number
mode.
(current file repeat)
(current folder repeat)
(entire disc repeat)
TRACK
GROUP
ALL
3 Select “PLAY”,
MODE
NORMAL
RANDOM
PROGRAM
then press [ENTER].
ENTER
• During playback, press [MODE].
CD/MP3: twice
DVD:
Note:
three times
Note:
•To erase all program at once, select
“ALL CLEAR’’ and press [ENTER] or
press [CLEAR] at step 2.
• Repeat setting (except “ALL”) will
be cleared when moving to another
title, chapter, track/file or folder.
• This function is not available with
some discs or during repeat A-B
playback.
2 Select “RANDOM”.
Then press [ENTER].
•If the title, chapter, track number is
incorrect, the programmed number
you entered will be skipped during
programmed playback.
ENTER
ENTER
•While a program is being played back,
[STOP C] works as follows;
Press [STOP C] and [PLAY B] next,
so that the programmed playback
restarts.
Random playback will start.
Press [STOP C] twice and [PLAY B]
next, so that playback restarts from
the first track in the original order.
However, your programmed playback
can be restarted when you follow the
above steps. (Your programs are still
stored until either the disc is removed
or power is turned off.)
Note:
• During random playback, you cannot
go back to the previous track, using
[SKIP G] allows you to search
chapters or tracks randomly.
• During DVD random playback, you
can play back chapters in the cur-
rent title randomly.
•Some DVD will not allow you to set
programmed playback.
• Some DVD will not allow you to set
random playback.
•During programmed playback, you
cannot setup “
GROUP’’ (MP3).
TITLE’’ (DVD), “
EN
–
–
12
Special Settings
Subtitle Language
Each time you press [AUDIO], audio
language changes as example below.
Stereo Sound Mode
ENG (English audio)
This unit allows you to select a subtitle
language (if available) during DVD
playback.
This unit allows you to select a sound
mode during CD playback.
SPA
FRE
(Spanish audio)
(French audio)
1
PLAY
1
STEREO
PLAY
1. ENG/6
AUDIO
Note:
SUBTITLE
•
Some discs will only allow you to change the
audio setting from the disc menu. Refer to the
manual accompanying the discs for details.
If your language is not shown after pressing
[AUDIO] several times, the disc may not have
that language. However, some discs allow
audio language setting on the disc menu.
(Operation varies depending on the disc, so
refer to the manual along with the disc.)
Each time you press [AUDIO], sound
Each time you press [SUBTITLE],
subtitle language changes as example
below.
mode changes as example below.
•
STEREO (right and left channels
are active)
OFF
ENG (English subtitles)
FRE (French subtitles)
(no subtitles)
L-ch
R-ch
(left channel is active)
(right channel is active)
Camera Angles
Virtual Surround
Some DVD may contain
scenes which have been
shot simultaneously from
various angles. You can
change the camera angle if
appears on the screen. If the “ANGLE
ICON” setting is “OFF” in “OTHERS”
You can enjoy stereophonic virtual world
on your existing 2 channel stereo system.
To set subtitle ON/OFF
1
PLAY
1
PLAY
1. ENG/6
OFF
menu,
pages 14-16.)
will not appear. (Refer to
SUBTITLE
MODE
1
PLAY
2
Press twice.
OFF
ENTER
1/8
(once for CD and MP3)
ANGLE
2 Using [s / B], you can select the
desired sound mode.
Note:
• If your language is not shown after
pressing [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow subtitle
language setting on the disc menu.
(Operation varies depending on the
disc, so refer to the manual along with
the disc.)
Each time you press [ANGLE], camera
ENTER
ROCK
angle changes.
Black Level Setting
3D: sound mode suitable for setting
stereophonic audio.
•
When “ ” appears on the TV screen,
it means no subtitle is recorded on the
scene.
JAZZ: sound mode suitable for jazz
Adjust the black level to make the dark
areas of the TV picture brighter.
music
ROCK: sound mode suitable for rock music
POP: sound mode suitable for pop music
•
Some discs will only allow you to change
the subtitle from the disc menu. Refer to
the manual accompanying the discs for
details.
1
CLASSIC: sound mode suitable for
PLAY
classic music
ON
OFF: no effects (original sound)
Audio Language
MODE
3
RETURN
This unit allows you to select an audio
language (if multiple languages are
available on disc) during DVD playback.
2
OFF
ENTER
Note:
• Virtual surround is available only
when the DVD player is connected
to a TV or stereo using the red and
white AUDIO OUT jacks on the DVD
player. Also, select the “SETUP”
menu to use Dolby Digital
1
PLAY
ON: makes the dark areas brighter.
OFF: shows the original picture as recorded.
1. ENG Dolby D 5.1ch 48k/3
3
RETURN
AUDIO
connection (COAXIAL), and setting in
PCM mode.
EN
–
–
13
DVD Setting
You can change the settings of the unit.
1 Press [SETUP].
2 Select the desired item.
SETUP
ENTER
ENTER
<SETUP MENU>
LANGUAGE
LANGUAGE
AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
SUBTITLE
DISC MENU
PLAYER MENU
LANGUAGE menu
DISPLAY menu
AUDIO menu
PARENTAL menu
OTHERS menu
INITIALIZE menu
LANGUAGE_AUDIO
DISPLAY_TV ASPECT
AUDIO_DRC
PARENTAL_PASSWORD
OTHERS_ANGLE ICON
INITIALIZE_INITIALIZE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
PASSWORD
NO
YES
ANGLE ICON
AUTO POWER OFF
ON
OFF
INITIALIZE
YES
SUBTITLE
DISC MENU
PLAYER MENU
SWEDISH
OTHERS
page 14
A
page 15
B
page 15
C
page 16
D
page 16
E
page 17
F
LANGUAGE Setting
A
Follow steps 1 to 2 above.
3 Select the desired item.
4 Select the desired language.
5 To exit the menu
ENTER
SETUP
ENTER
ENTER
ENTER
Note:
∗1
LANGUAGE menu
LANGUAGE_AUDIO
• Language options are not
available with some discs.
AUDIO: ∗1 ∗2
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
(Default: ORIGINAL)
• If “OTHERS” is selected in the
“AUDIO”, “SUBTITLE” or “DISC
MENU” screen, select the de-
sired language using
Sets the audio
language.
LANGUAGE_AUDIO
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SUBTITLE
DISC MENU
PLAYER MENU
SWEDISH
OTHERS
LANGUAGE_SUBTITLE
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle
language.
[K / L / s / B]. Press [ENTER].
LANGUAGE_AUDIO
SWEDISH
OTHERS
AUDIO
OFF
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
DUTCH
RUSSIAN
KOREAN
CHINESE
DANISH
JAPANESE
FINNISH
ROMANIAN
IRISH
NORWEGIAN
TURKISH
ICELANDIC
GREEK
PORTUGUESE POLISH
HUNGARIAN
LANGUAGE_DISC MENU
CZECH
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language in
DVD menu.
AUDIO
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
SUBTITLE
DISC MENU
PLAYER MENU
• Only the languages supported
by the disc can be selected.
∗2
OTHERS
• “LANGUAGE” setting for
“AUDIO” and “SUBTITLE” are
not available with some discs.
Then press [AUDIO] and
[SUBTITLE]. Details are on
page 13.
LANGUAGE_PLAYER MENU
PLAYER MENU
AUDIO
ENGLISH
FRANÇAIS
(Default: ENGLISH)
Sets the language for
the on-screen display.
SUBTITLE
DISC MENU
PLAYER MENU
ESPAÑOL
EN
–
–
14
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to 2 on page 14.
3 Select the desired item.
4
5 To exit
TV ASPECT: (Default: 4:3 LETTER BOX)
“TV ASPECT”
See note on the left.
DISPLAY_TV ASPECT
Select the
desired
or “STILL
MODE” menu
ENTER
ENTER
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
setting.
SETUP
ENTER
ENTER
DISPLAY menu
To complete
“PROGRESSIVE”
setting
STILL MODE: (Default: AUTO)
See note on the left.
DISPLAY_STILL MODE
Select the
desired
DISPLAY_TV ASPECT
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
setting.
ENTER
TV ASPECT
STILL MODE
PROGRESSIVE
AUTO
FIELD
FRAME
AUTO
FIELD
FRAME
ENTER
ENTER
ENTER
Note:
PROGRESSIVE: (Default: OFF)
Select
“ON”.
See note on the right.
TV ASPECT:
DISPLAY_PROGRESSIVE
• Select “4:3 LETTER BOX”, so that
black bars may appear on the top and
bottom of the screen.
SETUP
TV ASPECT
STILL MODE
PROGRESSIVE
OFF
ON
OFF
ON
ENTER
Note:
PROGRESSIVE:
• Select “4:3 PAN & SCAN” for a full
ENTER
height picture with both sides adjusted.
• You can set
• Select “16:9 WIDE” if a wide-screen TV
is connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, it automatically
selects the best resolution setting
(“FRAME” or “FIELD”) based on the
data characteristics of the pictures.
(default)
“PROGRESSIVE” to
“OFF” in “DISPLAY”
menu or press and
hold [PLAY B] on the
front of the unit for
more than 5 seconds
during playback, so
that the P- SCAN
indicator on the front
panel turns off.
Select
Before proceeding…
“Yes”.
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
ENTER
If there is no
picture or you
do not press
any buttons for
15 seconds,
“PROGRESSIVE”
will switch to
“OFF” and it will
exit the “SETUP”
menu.
Activate Progressive?
NO
YES
SELECT:
K
/
L
SET:ENTER
• If you select “FIELD”, the picture in the
ENTER
still mode will be stabilized.
• If you select “FRAME”, the picture in
the still mode will be highly defined.
• An individual picture on TV screen is
called a “frame”, which consists of two
separate images called as “field”.
• Some pictures may be blurred if you
select “AUTO” in the still mode due to
their date characteristics.
•
When “PROGRESSIVE”
is “ON”, video signals
from the unit’s VIDEO
OUT and S-VIDEO OUT
jacks will be distorted or
not be output at all.
Select
“Yes”.
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
ENTER
NO
YES
SET:ENTER
SELECT:
K
/
L
AUDIO Setting
C
Choose the appropriate audio settings for your device. It only affects during the playback of DVD. Follow steps 1 to 2 on
page 14.
3 Select the desired item.
4
5 To exit the menu
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
SETUP
ENTER
Select the
AUDIO_DRC
desired
setting.
ENTER
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
ON
OFF
Note:
ENTER
ENTER
DRC:
AUDIO menu
• This function is
available only on the
discs which are re-
corded in the Dolby
Digital format.
AUDIO_DRC
DOWN SAMPLING: (Default: ON)
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DOWN SAMPLING:
• When playing back
disc with copyright
protection, the sound
will be down sampled
at 48kHz, even if you
set to “OFF”.
Select the
desired
setting.
AUDIO_DOWN SAMPLING
ENTER
DRC
ON
OFF
ON
OFF
DOWN SAMPLING
DOLBY DIGITAL
ENTER
ENTER
DOLBY DIGITAL: (Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital signals.
• PCM: convert the Dolby Digital into PCM (2 channel).
AUDIO_DOLBY DIGITAL
Select the
desired
DRC
DOWN SAMPLING
DOLBY DIGITAL
BITSTREAM
PCM
BITSTREAM
PCM
ENTER
setting.
ENTER
ENTER
EN
–
–
15
PARENTAL Setting
D
Parental control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental level allows you to set the rating levels of your DVD. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to 2 on page 14.
3 Press [ENTER],
4 Enter your desired
5 Select “LEVEL”.
6 Select the desired
level, and press
[ENTER].
ENTER
ENTER
ENTER
and then select “YES”.
4-digit password.
ENTER
1
4
7
2
5
8
0
3
6
9
ENTER
ENTER
ENTER
If the password has not been
set yet.
PARENTAL menu
PASSWORD
NO
YES
PASSWORD
LEVEL
CHANGE
PASSWORD
LEVEL
CHANGE
Enter password
- - - -
8 [ADULT]
PARENTAL_PASSWORD
PASSWORD
NO
YES
TIPS FOR LEVELS
Enter a new
password again.
• 8 [ADULT]:
DVD software of any grades (adult/
general/children) can be played back.
no one under 17 admitted
restricted; under 17 requires
accompanying parent or adult guardian
parental guidance recommended
unsuitable for children under 13
parental guidance suggested
general audience
If the password has been
set already, enter the current
4-digit password.
• 7 [NC-17]:
• 6 [R]:
PASSWORD
NO
YES
Re-enter password
- - - -
PARENTAL menu
• 5 [PGR]:
• 4 [PG13]:
• 3 [PG]:
• 2 [G]:
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
• 1 [KID SAFE]: suitable for children
Enter password
- - - -
7 To exit the menu
If you do not need
parental lock, choose
“NO”. Press [ENTER].
SETUP
Note:
• For DVD, the resume information will be cleared if you change the
parental level when the resume information is on.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 2 on page 14.
ENTER
ENTER
6 Select “CHANGE” at step
7 Enter your desired
8
Enter your new 4-
digit password again.
9 To exit the menu
5 above.
4-digit password.
SETUP
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
PARENTAL menu
Note:
• Record the password in
case you forget it.
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
•
If you forget the password,
press [4], [7], [3], [7] at step
3 above, then enter your new
password. Password will be
cleared and parental levels
will be set to “8 [ADULT]”.
PASSWORD
LEVEL
PASSWORD
LEVEL
CHANGE
CHANGE
Enter new password
- - - -
Re-enter password
- - - -
OTHERS Setting
E
You can change the other functions. Follow steps 1 to 2 on page 14.
3 Select the desired item.
4
5 To exit the menu
(Default: ON)
ANGLE ICON:
SETUP
Set to “ON” to display
when
Select the
desired
ENTER
multiple camera angles are available
during DVD playback.
setting.
ENTER
ANGLE ICON
ON
ON
AUTO POWER OFF
OFF
OFF
ENTER
ENTER
OTHERS menu
(Default: ON)
AUTO POWER OFF:
OTHERS_ANGLE ICON
Select the
desired
Set to “ON” to turn this unit off
automatically after 30 minutes of no
use.
ANGLE ICON
AUTO POWER OFF
ON
OFF
setting.
ENTER
ANGLE ICON
ON
ON
AUTO POWER OFF
OFF
OFF
ENTER
ENTER
EN
–
–
16
Reset to the Default Setting (Except for PARENTAL Setting)
F
1 Press [SETUP].
2 Select “INITIALIZE”.
3 Select the desired
PLAYER MENU
Note:
• When you do not
wish to initialize,
press [SETUP] to
exit the menu at
step 2.
SETUP
Language, using [the
Number buttons].
ENTER
STOP
ENTER
<SETUP MENU>
Press
twice.
SELECT MENU LANGUAGE
LANGUAGE
INITIALIZE_INITIALIZE
1
2
3
ENGLISH
FRENCH
SPANISH
AUDIO
INITIALIZE
YES
SUBTITLE
DISC MENU
PLAYER MENU
INFORMATION
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.
Problem
No power
Corrective action
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
–Check if the TV is switched on.
–Check the video connection.
No sound or picture
Distorted picture
–Check the audio/video cable connections to the TV.
(Refer to page 6.)
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the unit directly to the TV.
–Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive
scan and you are using the component video connections between the unit and the TV. Disable
progressive scan for all other connections. (Refer to page 6.)
Completely distorted picture or
black/white picture with DVD
–Connect this unit directly to the TV.
–Make sure the disc is compatible with the unit.
–Adjust the volume.
No sound or distorted sound
No audio at digital output
No DTS audio is output.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches your receiver capabilities.
–This unit does not support DTS audio.
This is not a malfunction.
Picture freezes momentarily during
playback.
–Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Ensure the disc is inserted in correct direction.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays back on this unit.
Disc cannot be played back.
–
Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No return to start-up screen when
disc is removed.
–Reset the unit by switching off the unit, then on again.
–Aim the remote control directly at the sensor on the front panel.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the
volume. If you hear some signal sound from the radio by pressing buttons on the remote control,
the remote control is working.
–Press and hold any button on remote control toward a digital camera. The remote control is
working if you confirm infrared light through the digital camera.
The unit does not respond to
the remote control.
Buttons do not work or the unit stops
responding.
The unit does not respond to some
operating commands during playback.
–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
–Operations may not be permitted by the disc. Refer to the instructions of the disc.
–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for
repair.
The unit cannot read CD / DVD.
Angle does not switch.
–The angle cannot be switched for DVD which do not contain multiple angles. In some cases
multiple angles are only recorded for specific scenes.
Playback does not start
when the title is selected.
–Check the “PARENTAL” setting.
The password for rating level
has been forgotten.
–Enter the default password “4737”, then your forgotten password will be cleared.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s
manual for more details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
EN
–
–
17
Specifications
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Output signal format :
NTSC color
Power source :
120V AC +/- 10%, 60Hz +/- 0.5%
Power consumption :
10W (standby : 0.9W)
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
W : 8.3”
H : 2.0”
D : 9.7”
Weight :
(210mm)
(50mm)
(245mm)
Approx 1.8lbs. (0.8kg)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in
ABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI,
ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PUR-
POSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REP-
RESENTATIVES IN THE UNITED STATES. ALL WARRANTY
INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN
AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID
WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERV-
ICE CENTER.
the event of defect in materials or workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective
parts without charge for one (1) year from the date of
original retail purchase. Certain parts are excluded from
this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a
period of ninety (90) days from the date of original retail
purchase.
IMPORTANT:
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A
purchase receipt or other proof of original retail purchase will be
required together with the product to obtain service under this war-
ranty.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY
PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH
THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
This warranty shall not be extended to any other person or trans-
feree.
ATTENTION:
This warranty is void and of no effect if any serial numbers on
the product are altered, replaced, defaced, missing or if service
was attempted by an unauthorized service center. This limited war-
ranty does not apply to any product not purchased and used in the
United States.
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY
DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED
REPAIRS:
This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs dur-
ing normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty instal-
lation, improper maintenance, commercial use such as hotel, rental
or office use of this product or damage which results from fire, flood,
lightning or other acts of God.
To obtain warranty service, you must take the product, or
deliver the product freight prepaid, in either its original packag-
ing or packaging affording an equal degree of protection, to any
AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reim-
burse you for any service done by unauthorized service providers
without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for
general service inquiries, please contact us at:
THIS WARRANTY DOES NOT COVER PACKING MATERIALS,
ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO
OR FLOOR MODELS.FUNAI CORP. AND ITS REPRESENTA-
TIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARIS-
ING OUT OF OR OCCASIONED BY THE USE OF OR THE IN-
FUNAI CORPORATION
Customer Service
Tel :1-800-317-6062
19900 Van Ness Avenue, Torrance, CA 90501
EN
–
–
18
Español
Conexiones
Reproducción
1
4
Antes.
Si su televisor tiene entradas de
AUDIO/VIDEO vea la sección
“Connection to a TV” en la página 6 en
el manual de manejo. En caso
contrario, vea la sección “Connecting
to RF Modulator (Not Supplied)” en
la página del frente en el manual de
manejo.
¡Encienda el televisor,
amplificador y otros equipos
conectados a esta unidad.
Asegúrese
1 Para abrir o
cerrar la bandeja
del disco
2 Ponga un disco
con la etiqueta
hacia arriba.
STANDBY-ON
OPEN/CLOSE
que el
SEARCH
OPEN/CLOSE
STANDBY-ON
DISPLAY
MODE
1
1
4
televisor y el
sintonizador
de audio
AUDIO
SUBTITLE
ANGLE
REPEAT
A-B
1
4
2
5
8
0
3
6
7
9
CLEAR
3 Para empezar la 4 Para parar la
están en el
canal
correcto.
+10
PAUSE
SKIP
reproducción
reproducción
PLAY
STOP
3
REV
FWD
Instalación de las pilas en
el control remoto
PLAY
STOP
2
Control remoto
5
1
2
3
Disco
(Orden alfabético)
Botón
1
4
7
2
5
8
0
3
6
•Para seleccionar directamente la canción.
(CD)
•Para seleccionar directamente el grupo/
canción. (MP3)
• Para seleccionar directamente el capítulo
o título.
9
+10
Para cambiar el idioma en
la pantalla
3
ENTER
•Para mover el cursor y determinar la
posición.
•Para mover el cursor y determinar la
posición.
1 Confirme que ha seleccionado
“LANGUAGE”.
A-B
•Para repetir entre su punto A y B
seleccionado.
•Para repetir entre su punto A y B
seleccionado.
SETUP
STANDBY-ON
ANGLE
AUDIO
STOP
•Para seleccionar los ángulos de la
cámara en un disco.
------
•Para seleccionar idiomas de audio en un
disco.
•Para seleccionar “ESTÉREO”, “L-ch” o
“R-ch”. (CD)
LANGUAGE
•Para eliminar el Nº de estado en la
entrada de programa.
•Para borrar los números mal entrados.
•Para borrar el punto para la repetición
A-B.
•Para eliminar el Nº de estado en la
entrada de programa.
•Para borrar los números mal entrados.
•Para borrar el punto para la repetición
A-B.
AUDIO
CLEAR
SUBTITLE
DISC MENU
PLAYER MENU
DISPLAY
•Para mostrar el modo de disco actual.
•Para mostrar el modo de disco actual.
ENTER
•
Para buscar en avance/retroceso por un disco.
•Para buscar en avance/retroceso por un
disco.
REV
FWD
•Para empezar la reproducción en avance
lento durante el modo de pausa.
2 Seleccione “PLAYER MENU”.
MENU
MODE
•Para llamar el menú en un disco.
------
•Para disponer el orden de reproducción o •Para disponer el orden de reproducción o
la reproducción aleatoria. la reproducción aleatoria.
•Para activar/desactivar el nivel del negro. •Para activar/desactivar el ambiental
ENTER
LANGUAGE_PLAYER MENU
•
Para activar/desactivar el ambiental virtual.
virtual.
AUDIO
ENGLISH
FRANÇAIS
ESPAÑOL
SUBTITLE
DISC MENU
PLAYER MENU
OPEN/CLOSE
PAUSE
•Para abrir o cerrar la bandeja del disco.
•Para encender la unidad.
•Para abrir o cerrar la bandeja del disco.
•Para encender la unidad.
•Para hacer una pausa en la reproducción. •Para hacer una pausa en la reproducción
•
Para avanzar la reproducción un cuadro cada vez.
del disco.
ENTER
•
Para empezar la reproducción del disco.
•Para empezar la reproducción del disco.
•Para encender la unidad.
PLAY
•Para encender la unidad.
•Para reproducir repetidamente una
canción o disco. (CD)
•Para reproducir repetidamente una
cansión, grupo o disco. (MP3)
3 Seleccione el idioma deseado para
REPEAT
•Para reproducir repetidamente un
capítulo o título.
las indicaciones en la pantalla.
RETURN
LANGUAGE_PLAYER MENU
•Para volver a la operación anterior en el
menú.
•Para volver a la operación anterior en el
menú.
AUDIO
ENGLISH
FRANÇAIS
ESPAÑOL
ENTER
SUBTITLE
DISC MENU
PLAYER MENU
SEARCH
MODE
•Para buscar una canción.
•Para buscar el tiempo. (CD)
•Para buscar los grupos. (MP3)
•Para buscar un capítulo, título o tiempo.
SETUP
SKIP
•
Para llamar el menú de ajustes de DVD.
•Para llamar el menú de ajustes de DVD.
ENTER
SETUP
•Para saltar canciones. (CD)
•Para saltar los grupos o canciones. (MP3)
• Para saltar capítulos o titulo.
STANDBY-ON
4 Para salir del menú
•Para encender o apagar la unidad.
•Para encender o apagar la unidad.
STOP
• Para parar la reproducción.
•Para parar la reproducción.
------
SUBTITLE
•Para seleccionar subtítulos en un disco.
TOP MENU
ZOOM
•Para llamar el menú inicial en un disco.
------
------
•Para ampliar la imagen de vídeo en DVD.
(2x / 3x / 4x / 1/2x)
ES
–
–
19
Quick Use Guide
Connections
Playback
1
4
Before:
If your TV has AUDIO/VIDEO input
jacks, see the section “Connection to a
TV” on page 6 of the owner’s manual.
If not, see the section “Connecting to
RF Modulator (Not Supplied)” on the
front page of the owner’s manual.
Turn on the TV, amplifier
and any other devices which
are connected to this unit.
Make sure the
1 To open the disc 2 Insert a disc with
tray
label facing up.
TV and audio
receiver are set 1
to the correct
channel.
STANDBY-ON
OPEN/CLOSE
SEARCH
OPEN/CLOSE
DISPLAY
MODE
STANDBY-ON
1
4
AUDIO
SUBTITLE
ANGLE
REPEAT
A-B
1
4
2
5
8
0
3
6
7
9
Installing the Batteries for
the Remote Control
CLEAR
2
+10
3 To start playback 4 To stop playback
PAUSE
SKIP
PLAY
STOP
3
REV
FWD
PLAY
STOP
1
2
3
Remote Control
5
Media
Button
(Alphabetical order)
1
4
7
2
5
8
0
3
6
To Change the
On-Screen Language
3
• To select track directly. (CD)
• To select folder/file directly. (MP3)
• To select chapter or title directly.
9
+10
1 Confirm that “LANGUAGE” is selected.
ENTER
• To move the cursor and determine its
position.
• To move the cursor and determine its
position.
SETUP
STANDBY-ON
STOP
A-B
• To repeat between your chosen point of
A and B.
• To repeat between your chosen point of
A and B.
ANGLE
AUDIO
LANGUAGE
• To select camera angles on a disc.
• To select audio language on a disc.
------
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
• To select “STEREO”, “L-ch” or “R-ch”.
(CD)
• To remove status number in program
input.
• To remove status number in program
input.
CLEAR
• To clear the numbers entered incorrectly. • To clear the numbers entered incorrectly.
ENTER
• To cancel the point for A-B repeat.
•
To cancel the point for A-B repeat.
DISPLAY
• To display the current disc mode.
• To display the current disc mode.
• To search forward/backward through
a disc.
• To begin slow forward playback in the
pause mode.
2 Select “PLAYER MENU”.
• To search forward/backward through
a disc.
REV
FWD
MENU
MODE
ENTER
• To call up the menu on a disc.
------
LANGUAGE_PLAYER MENU
AUDIO
ENGLISH
FRANÇAIS
ESPAÑOL
SUBTITLE
DISC MENU
PLAYER MENU
• To arrange the playing order or play
randomly.
• To set black level on/off.
• To set virtual surround on/off.
•
To arrange the playing order or play
randomly.
• To set virtual surround on/off.
OPEN/CLOSE
PAUSE
• To open or close the disc tray.
• To turn on the unit.
• To open or close the disc tray.
• To turn on the unit.
ENTER
• To pause disc playback.
• To pause disc playback.
•
To advance playback one frame at a time.
• To begin disc playback.
• To turn on the unit.
• To begin disc playback.
• To turn on the unit.
• To play back a track or disc repeatedly.
(CD)
• To play back a file, folder or disc
repeatedly. (MP3)
3 Select the desired language for the
PLAY
on-screen language.
REPEAT
• To play back a chapter or title repeatedly.
LANGUAGE_PLAYER MENU
ENTER
AUDIO
ENGLISH
FRANÇAIS
ESPAÑOL
SUBTITLE
DISC MENU
PLAYER MENU
RETURN
• To return to the previous operation in
menu.
• To return to the previous operation in
menu.
SEARCH
MODE
• To search tracks.
• To search time. (CD)
• To search folders. (MP3)
• To search chapter, title or time.
ENTER
SETUP
SKIP
• To call up the setup menu.
• To skip chapters or titles.
• To call up the setup menu.
• To skip tracks. (CD)
• To skip folders or files. (MP3)
4 To exit the menu
SETUP
STANDBY-ON
• To turn the unit on/off.
• To turn the unit on/off.
STOP
• To stop playback.
• To stop playback.
------
SUBTITLE
• To select subtitles on a disc.
TOP MENU
ZOOM
• To call up the top menu on a disc.
------
------
• To magnify part of a picture.
(2x / 3x / 4x / 1/2x)
Printed in China
E6KPTUD
1VMN24994 ★★★★★
|