Ecom Instruments Ex CDMA 02 User Manual

Non-Incendive Cell Phone

Ex-CDMA 02

Safety instructions

Choosing a different ringer

Adjusting volume

5ꢀ

6ꢀ

Using shortcuts

Personalizing the screen

Creating a secure environment

Setting message alerts

Network settings

Data settings

Setting position location

17. Using Voice Recognition

Setting up voice dialing

Using voice tags to place calls

Using voice features with hands-freecar kits

Training voice recognition

18. Using Tools

Scheduler

Alarm Clock

Tip Calculator

Calculator

Timer

Stopwatch

19. Media Gallery

My Sounds

My Pictures

Doodler

20. Get It Now

Downloading an application

Removing an application

21. Connecting to the Internet

Using Mobile Web

22. Getting Help

Note:

The current operating manual, the FM Certificate of Compliance can be

downloaded from the relevant product page at www.ecom-ex.com, or

alternatively they can be requested directly from the manufacturer.

1. Application

The EX-CDMA 02 is a mobile phone based on the CDMA standard for indus-

trial application in areas with an increased risk of explosion in Class I Div 2.

2. Safety information

These safety instructions contain information and safety regulations which

are to be observed without fail for safe operation in the described conditions.

Non-observance of this information and these instructions can have serious

consequences or may violate regulations.

Please read these operating instructions carefully before starting to use the

unit!

3. Faults and damage

If there is any reason to suspect that the safety of the unit has been impaired,

it must be withdrawn from use and removed immediately from the hazardous

area.

Measures must be undertaken to prevent it from being restarted accidentally.

We recommend that the unit is returned to the manufacturer for inspection.

The safety of the unit may be compromised, if, for example:

- there is visible damage to the housing.

- the unit has been subjected to excessive loads.

- the unit has been improperly stored.

- the unit has been damaged in transit.

- unit markings or inscriptions are illegible.

- malfunctions occur.

- permitted limit values have been exceeded.

4. Safety regulations

Use of this unit assumes that the operator observes conventional safety

regulations and has read the certificate in order to eliminate faulty operation

of the unit.

The following safety regulations must also be complied with:

-Before using the unit in hazardous areas, the charging interface must be

inspected for contamination and if required, cleaned with a brush or by

blowing off with compressed air.

-The battery compartment cover may not be opened inside the hazardous

area.

-The battery compartment cover is not allowed to use on non explosion

proved mobiles

- The battery may only be changed or charged outside the hazardous area.

- It is not allowed to carry additional battery packs in the hazardous area.

- Only AM CDMA 00036 batteries specified by the manufacturer may be

used.

- The use of other batteries is strictly prohibited and will result in the nullifica-

tion of explosion protection.

- The battery may only be charged outside the hazardous area using the ap-

propriate travel charger Kyocera Travel Charger Model: TXTVLꢀ0072. Other

chargers that are suitable for the unit may also be used.

At the moment are no suitable accessories for the hazardous area available

It must be ensured that the unit is only taken into areas according Classꢀ

Div2.

5. Ex-Data

FM-Indicator: NI/I/2/ABCD T6

Ta = -22° to +ꢀ40°F ( -30° to +60°C )

Intrinsically Safe for use in a Class I, Division 2, Groups A, B, C & D with a

Temperature class of T6

6. Specifications

Operating voltage:

Dimensions (LxWxD):

Weight:

3.7 V

ꢀ50 x 50 x 35 mm

approx. 200g

Battery / power supply: AM CDMA 00036

Operating time:

(standby/RX/TX)5 hours (90/5/5)

Ambient temperature Ta: -22° to +ꢀ40°F ( -30° to +60°C )

Storage temperature:

-22° to +ꢀ40°F ( -30° to +60°C )

7. Cleaning, maintenance and storage

- Only use a damp and suitable cloth or sponge to clean the unit. Do not use

any solvents or abrasive cleaning agents when cleaning.

- It is recommended that you have the functionality and accuracy of the unit

inspected by the manufacturer every two years.

- The battery should be removed from the unit during prolonged periods of

storage.

- Do not allow storage temperatures to exceed or fall below the permitted

range of -22° to +ꢀ40°F ( -30° to +60°C ).

8. Certificate of Compliance

9. Warranty and Liability

For this product, ecom Instruments GmbH warrants the function and material

for a period of two years beginning the date of the purchase under normal

operating and maintenance conditions. Wearing parts, rechargeable and

non-rechargeable batteries are exempt from this. A six-month warranty

applies to rechargeable batteries.

The warranty does not apply to products which are improperly used, mo-

dified, neglected, damaged in accidents or exposed to abnormal operating

conditions. Claims under the warranty can be made by returning the defec-

tive equipment to the manufacturer.

In the event of a warranty claim, the faulty device should be sent in. We

reserve the right to re-calibrate, repair or replace the device.

The above warranty terms represent the sole rights of the purchaser to

compensation and apply exclusively and in place of all other contractual

or statutory warranty obligations. ecom instruments GmbH does not accept

liability for specific, direct, indirect, incidental or consequential damages or

losses, including the loss of data, regardless of whether they are caused by

breach of warranty, lawful or unlawful actions, actions in good faith or other

actions.

If in certain countries the restriction of statutory warranty and the exclusion

or restriction of incidental or consequential damages is unlawful, then it may

be possible that the above restrictions and exclusions do not apply for all

purchasers. If any clause in these warranty terms is found to be invalid or

unenforceable by a competent court, then such a judgement shall not affect

the validity or enforceability of any other clause contained in these warranty

terms.

10. User Guide for the ecom Ex-CDMA 02 Phone

This manual is based on the production version of the Kyocera KX 444 S

phone. Software changes may have occurred after this printing. Kyocera

reserves the right to make changes in technical and product specifications

without prior notice. The products and equipment described in this docu-

mentation are manufactured under license from QUALCOMM Incorporated

under one or more of the following U.S. patents:

4,90ꢀ,307 5,ꢀ09,390

5,544,ꢀ96 5,657,420

5,267,262

5,ꢀ0ꢀ,50ꢀ

5,600,754

5,056,ꢀ09

5,4ꢀ6,797

5,267,26ꢀ

5,778,338

5,568,483

5,506,865

5,4ꢀ4,7965,

5,228,054

5,659,569

504,773

5,535,239

5,337,338 5,7ꢀ0,784

5,490,ꢀ65 5,5ꢀꢀ,073

Other patents pending.

The Kyocera Wireless Corp. („KWC“) products described in this manual may

include copyrighted KWC and third party software stored in semiconductor

memories or other media. Laws in the United States and other countries pre-

serve for KWC and third party software providers certain exclusive rights for

copyrighted software, such as the exclusive rights to distribute or reproduce

the copyrighted software. Accordingly, any copyrighted software contained

in the KWC products may not be modified, reverse engineered, distributed or

reproduced in any manner not permitted by law.Furthermore, the purchase

of the KWC products shall not be deemed to grant either directly or by

implication, estoppel, or otherwise, any license under the copyrights, patents

or patent applications of KWC or any third party software provider, except for

the normal, non-exclusive royalty-free license to use that arises by operation

of law in the sale of a product.

Kyocera is a registered trademark of Kyocera

Corporation. Doodler is a trademark of Kyocera Wireless Corp. QUALCOMM

is a registered trademark of QUALCOMM Incorporated. Openwave is a trade-

mark of Openwave Systems Incorporated. eZiText is a registered trademark

of Zi Corporation. Get It Now is a service mark of Verizon Wireless. All other

trademarks are the property of their respective owners.

FCC/IC Notice

This device complies with part ꢀ5 of the FCC rules. Operation is subject to

the following two conditions: (ꢀ) This device may not cause harmful inter-

ference, and (2) this device must accept any interference received, including

interference that may causeundesired operation.

ꢀ0

Other accessories used with this device for body-worn operations must not

contain any metallic components and must provide at least 25 mm separati-

on distance, including the antenna, and the user‘s body.

THIS MODEL PHONE MEETS THE GOVERNMENT‘S REQUIREMENTS

FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed

and manufactured not to exceed the emission limits for exposure to radio

frequency (RF) energy set by the Federal Communications Commission of

the U.S. Government. These limits are part of comprehensive guidelines and

establish permitted levels of RF energy for the general population. The guide-

lines are based on standards that were developed by independent scientific-

organizations through periodic and thorough evaluation of scientific studies.

The standards include a substantial safety margin designed to assure the

safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of mea-

surement known as the Specific Absorption Rate, or SAR. The SAR limit set

by the FCC is ꢀ.6 W/kg.* Tests for SAR are conducted using standard opera-

ting positions specified by the FCC with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified power level, the ac-

tual SAR level of the phone while operating can be well below the maximum

value. This is because the phone is designed to operate at multiple power

levels so as to use only the power required to reach the network. In general,

the closer you are to a wireless base station antenna, the lower the power

output.

Before a phone model is available for sale to the public, it must be tested and

certified to the FCC that it does not exceed the limit established by the go-

vernment-adopted requirement for safe exposure. The tests are performedin

positions and locations (e.g., at the ear and worn on the body) as required by

the FCC for each model.

While there may be differences between the SAR levelsof various phones

and at various positions, they all meet the government requirement for safe

exposure.

ꢀꢀ

The FCC has granted an Equipment Authorization for this model phone with

all reported SAR levels evaluatedas in compliance with the FCC RF emission

guidelines. SAR information on this model phone is on file with the FCC and

can be found under the Display Grant section http://www.fcc.gov/oet/fccid

after searching on FCCID OVFKWC-KX444. Additional information on SAR

can be found on the Cellular Telecommunications and Internet Association

(CTIA) web-site at http://www.wow-com.com.

* In the United States and Canada, the SAR limit formobile phones used by

the public is ꢀ.6 watts/kg (W/kg) averaged over one gram of tissue. The stan-

dardincorporates a substantial margin of safety to give additional protection

for the public and to account for any variations in measurements.

Caution

The user is cautioned that changes or modifications not expressly approved

by the party responsible for compliance could void the warranty and user‘s

authority to operate the equipment.

Warning

Use only ecom approved accessories with ecom modified phones. Use of

any unauthorized accessories (includes faceplates/front housings) may be

dangerous and will invalidate the phone warranty if said accessories cause-

damage or a defect to the phone.

The approval for hazardous areas expires if used unauthorized accessories.

Optimize your phone‘s performance

Use the guidelines on page ꢀ to learn how to optimizethe performance and

life of your phone, antenna, and battery.

Air bags

If your vehicle has an air bag, DO NOT place installed or portable phone

equipment or other objects over the airbag or in the air bag deployment area.

If equipment is not properly installed, you and your passengers risk serious

injury.

Medical devices

Pacemakers-Warning to pacemaker wearers: wireless phones, when in

the ‚on‘ position, have been shown to interfere with pacemakers. The phone

should be kept at least six (6) inches away from the pacemaker to reduce

risk. The Health Industry Manufacturers Association and the wireless tech-

nology research community recommend that you follow these guidelines to

minimize the potential for interference.

ꢀ2

• Always keep the phone at least six inches (ꢀ5 centimeters) away from your

pacemaker when the phone is turned on.

• Do not carry your phone near your heart.

• Use the ear opposite the pacemaker.

• If you have any reason to suspect that interference is taking place, turn off

your phone immediately.

Hearing aids-Some digital wireless phones mayinterfere with hearing aids.

In the event of such interference, you may want to consult Verizon or call the

customer service line to discuss alternatives.

Other medical devices-If you use any other personal medical device, con-

sult the manufacturer of the device to determine if it is adequately shielded

from external RF energy. Your physician may be able to help you obtain this

information.

In health care facilities-Turn your phone off in healthcare facilities when

instructed. Hospitals and health care facilities may be using equipment that

is sensitive to external RF energy.

Potentially unsafe areas

Posted facilities-Turn your phone off in any facility when posted notices

require you to do so.

Aircraft-FCC regulations prohibit using your phone ona plane that is in

the air. Turn your phone off or switch it to Airplane mode (page 23) before

boarding aircraft.

Vehicles-RF signals may affect improperly installed or inadequately shielded

electronic systems in motorvehicles. Check with the manufacturer of the

device to determine if it is adequately shielded from external RF energy.

Blasting areas-Turn off your phone where blasting is in progress. Observe

restrictions, and follow any regulations or rules.

Potentially explosive atmospheres - Turn off your phone when you are

in any area with a potentially explosive atmosphere. Obey all signs and

instructions. Sparks in such areas could cause an explosion or fire, resulting

in bodily injury or death.

Areas with a potentially explosive atmosphere are often, but not always,

clearly marked. They include:

• fueling areas such as gas stations

ꢀ3

• below deck on boats

• transfer or storage facilities for fuel or chemicals

• vehicles using liquefied petroleum gas, such as propane or butane

• areas where the air contains chemicals or particles such as grain, dust, or

metal powders

• any other area where you would normally be advised to turn off your vehi-

cle engine

Expection:

This device is allowed to use in areas according the following Norm:

Hazardous areas

Class I Div. 2 A-D T6

Ta = -22°F ... + ꢀ40°F

Use with care

Use only in normal position (to ear). Avoid dropping, hitting, bending, or

sitting on the phone.

Keep phone dry

If the phone gets wet, turn the power off immediately and contact your dealer.

Water damage may not be covered under warranty.

Resetting the phone

Attention not allowed in hazardous areas!

If the screen seems frozen and the keypad does not respond to keypresses,

reset the phone by completing the following steps:

ꢀ. Remove the battery door.

2. Remove and replace the battery. If the problem persists, return the phone

to the dealer for service.

Accessories

For the Ex-CDMA 02 are no accessories approved at the moment.

Use only ecom approved accessories with ecom phones.

For further information visit: www.ecom-ex.com

Radio frequency (RF) energy

Your telephone is a radio transmitter and receiver. When it is on, it receives

and sends out RF energy. Verizon‘s network controls the power of the RF

signal. This power level can range from 0.006 to 0.6 watts.

In August ꢀ996, the U.S. Federal Communications Commission (FCC)

ꢀ4

adopted RF exposure guidelines with safety levels for hand-held wireless

phones. These guidelines are consistent with the safety standards previously

set by both U.S. and international standards bodies in the following reports:

• ANSI C95.ꢀ(American National Standards Institute, ꢀ992)

• NCRP Report 86 (National Council on Radiation Protection and

Measurements, ꢀ986)

• ICNIRP (International Commission on Non-Ionizing Radiation Protection,

ꢀ996)

Your phone complies with the standards set by these reports and the FCC

guidelines.

E911 Mandates

Where service is available, this handset complies with the Phase I and Phase

II E9ꢀꢀ Mandates issued by the FCC.

Battery and charger specifications

Charger

Input

Output

Kyocera travel

charger

ꢀ00-240VAC / 50/60Hz 0,2A 4.2V DC 0.6A

Battery: Lithium Ion 3.7V, ꢀ350mAh

For Questions concering the safety and use in hazardous areas

following the web side:

www.ecom-ex.com

and choose our US office

ꢀ5

11. GETTING STARTED

Important:

It is not allowed to install and charge the battery in hazardous areas.

Don‘t use the battery door from the Ex-CDMA 02 on a normal Kyocera phone

there is a danger of confusdion.

The battery door is a part of the protection only use it one the Ex-CDMA 02.

Your phone comes with a removable lithium ion (LiIon) battery. Fully charge

the battery before using the phone.

Installing the battery

ꢀ. Hold the phone facing away from you.

2. Use your fingernail to pull the circular

latch toward the bottom of the phone and

pull the battery door away.

3. Place the battery in the phone casing with

the metal contacts toward the top of the phone.

4. Place the battery door notches in the

openings near the bottom of the phone.

5. Press the circular latch until it clicks.

Charging the battery

You must have at least a partial charge in the

battery to make or receive calls. To charge the

battery, connect the AC adapter to the jack on

the lower right side of the phone, then plug the

adapter into a wall outlet.The battery icon in the

upper-right corner of the screen tells you

whether the phone is:

• Charging (the icon is animated)

• Partially charged

• Fully charged

ꢀ6

Recharging the battery:

You can safely recharge the battery at any time, even if it has a partial

charge.

Caring for the battery

General safety guidelines

• Do not take apart, puncture, or short-circuit the battery.

• If you have not used the battery for more than a month, recharge it before

using your phone.

• Avoid exposing the battery to extreme temperatures, direct sunlight, or high

humidity.

• Never dispose of any battery in or near a fire. It could explode.

Common causes of battery drain

• Playing games

• Using the Web

• Keeping backlight on

• Using the speakerphone

• Operating in analog ( ) mode. Your phoneswitches between modes to find

the best signal. To set your phone to operate in a single mode, select Menu

‡ Settings ‡ Network ‡ Digital or Analog.

• Operating in digital mode when far away from a base station or cell site.

• Using data cables or accessories.

• Operating when no service is available, orservice is available intermittently.

• High earpiece and ringer volume settings.

• Repeating sound, vibration, or lighted alerts.

Performing basic functions

• Turn the phone on: Press

and wait until the hourglass icon appears.

• Turn the phone off: Press and hold

screen goes blank.

until the phone beeps or the

• Make a call: Enter the number and press

• End a call: Press

• Answer a call: Press

(the red key).

(the green key).

• Access Contacts list: Press the Contacts button on the left side of the

phone.

• Turn the speakerphone on or off: Press the speakerphone button on the

top of the phone.

• Access voicemail: Press and hold

• Verify your phone number: Select Menu ‡ Phone Info. Press

and follow the system prompts.

down

to scroll through information.

• Silence the ringer: Press

, then

to answer.

ꢀ7

• Silence all sounds: Select Menu ‡ Settings ‡ Silent Mode and select

an option.

• Lock the keypad: Press and hold

• Access your personal shortcut: Press

up.

Getting to know your phone

Speakerphone button turns the speakerphone on or off.The loudspeaker is

located behind the keypad (item 9).

Jack for Hands-free headset (no in hazardous area) only.

Volume control button adjusts the volume.

Home screen. Press (item 6) to select Menu.

Contacts button accesses the Contacts

list from the home screen.

OK key selects a menu item or option.

Send/Talk key starts or answers a call.

Navigation key scrolls through lists

and positions cursor. Also accesses

shortcuts from the home screen.

Keypad for entering numbers,

letters, or symbols.

* Shift key changes the text mode

in text entry.

Antenna does not extend.

Clear key erases the last character in

text entry, orreturns to the previous menu.

End/Power key turns the phone on or off, ends a call, or returns you to the

home screen.

Jack for AC adapter (included).

Space # key enters a space during text entry.

0 Next key cycles through word choices during text entry.

Warning: Inserting an accessory into the incorrect jack will damage the phone.

Use only ecom approved accessories with ecom phones.

For further information visit: www.ecom-ex.com

ꢀ8

Using menus

The contents of the main menu are as follows:

Phone Info

Your Number

SW Version

PRI Version

ESN

Technology

SID

Browser Name

Browser Version

Icon Keys

Recent Calls

Messages

Incoming Calls Voicemail

Outgoing Calls Send New

Settings (Continued)

Security

Call Information

Network

Convenience

Msg Settings

Accessories

Missed Calls

Erase Lists

InBox

Net Alerts

OutBox

Contacts

View All

Add New

Find Name

Add Voice Dial

Saved

Group Lists

Erase Msgs

Msg Settings

Media Gallery

My Sounds

My Pictures

Doodler

(Scroll down to

view information.)

Speed Dial List Settings

Voice Dial List

Business List

Personal List

Information

Silent Mode

Keyguard

Sounds

Mobile Web

Launches the

Internet

Tools

Scheduler

Alarm Clock

Display

Voice Services Tip Calculator

Get It Now

Launches

shopping

options

Calculator

Timer

Stopwatch

• From the home screen, press

to select Menu.

• Press

left, right, up, or down to see menus.*

to select a menu or menu item.

up or down to view menu items.

• Press to back up a menu level.

• Press to return to the home screen.

In this guide, an arrow ‡ tells you to select an option from a menu.

For example,

Menu ‡ Settings means select Menu, then select the Settings option.

* To change the way the menus appear, select Menu ‡ Settings ‡ Display

‡ Main Menu View, then select either Graphic or List and press

ꢀ9

Understanding screen icons

These icons may appear on your phone‘s screen.

The phone is operating in IS2000 (ꢀX) digital mode.

The phone is operating in IS2000 digitalmode.

The phone is operating in IS95digital mode.

The phone is operating in Analog (FM) mode.

The phone is receiving a signal. You can make and receive phone

calls. Fewer bars indicate a weaker signal.

A call is in progress.

The phone is not receiving a signal.

You cannot make or receive any calls.

The phone is roaming outside of its home service area. The phone

may be sending and receiving signals over a network other than your

local service provider‘s network.

You have a text message, voicemail, or page. (Blinking icon indicates

an urgent message, voicemail, or page.)

The battery is fully charged. The more black bars, the greater the

charge.

The alarm clock is set.

The phone is in privacy mode or is accessing a secure Web site.

High-speed (3G) data service is available and active on your phone.

(blinking) The phone is sending highspeed data.

(blinking) The phone is receiving highspeed data.

High-speed data service is available, but the phone is dormant.

The phone is at the home screen. To access the menus, press

Keyguard is on. The keypad is locked.

The phone is set to light up instead of ring.

The phone is set to vibrate or to vibrate and then ring.

The speakerphone is on.

The speakerphone is off.

Position location is set to Verizon Wireless and to

emergency services.

Position location is set to emergency services only.

12. MAKING AND ANSWERING CALLS

This chapter discusses phone, fax, and data call son your Ex-CDMA 02

phone.

Making a call

ꢀ. Make sure you are in an area where the signal can be received. Look for

the

symbol onthe home screen. Note: The more bars you see in the

symbol, the clearer the reception. If there are no bars, try to move to

where the reception is better.

2. Enter the phone number.

3. Press

4. Press

to end the call.

Redialing a number

To redial the last number called, press

prompting you to speak a name, press

three times. If you see a message

again.

2ꢀ

Calling a saved number

If you have already saved a phone number, youcan use the contacts list to

find it quickly.

ꢀ. Select Menu ‡ Contacts ‡ View All. This brings up a list of all saved

contacts. Note: From the home screen, use the Contacts button to access

the Contacts list.

2. Scroll through the list, find the contact you want, and press

to dial the

number. For more about finding contact information, see page 32.

Tip: To call a saved number using your phone‘s voice recognition feature,

see „Using voice tags toplace calls“ on page 53.

Answering a call

When a call comes in, the phone rings, vibrates, or lights up (depending on

your settings), and a dancing phone icon appears. The phone numberof the

caller also appears, if it is not a restricted number. If the number is stored in

your Contactsdirectory, the contact name also appears.

• To answer the call, press

• If you do not wish to answer the call, select Silence and press

. Silence

mutes the ringer and sends the caller to voicemail if you do not pick up the

call.

Silencing an incoming call

• To silence an incoming call quickly, press

the call.

. Then press

to answer

This action silences the current call only. The next call will ring as normal.

Adjusting the volume during a call

• To adjust the earpiece volume during a call, press

up or down.

Calling emergency services

Note: Regardless of your 3-digit emergency code (9ꢀꢀ, ꢀꢀꢀ, 000, 999, etc.),

your phone will operate as described below.

• Dial your 3-digit emergency code and press

You can call the code even if your phone is locked and your account is re-

stricted. When you call, your phone enters Emergency mode. This enables

the emergency service exclusive access to your phone to call you back, if

necessary. To make or receive regular calls after dialing the code, you must

exit this mode.

To exit Emergency mode

When you have completed the emergency call:

ꢀ. Press

to select Exit.

2. Press

again to confirm your choice.

Note: To determine who has access to your location, see „Setting position

location“ on page 36.

Using your phone in an airplane

Note: Please check with uniformed crew personnel before operating your

phone in Airplane mode.

While in an airplane, it is normally required that you turn off your mobile

phone, because it emits RF signals that interfere with air traffic control. You

can, however, keep your Ex-CDMA 02 phone powered on if you set it to

Airplane mode. In Airplane mode, your phone does not emit RF signals. You

cannot make or receive regular phone calls, send text messages, or use the

Web, but you can play games, set the clock, and make emergency calls to

designated emergency services.

To set Airplane mode

ꢀ. Select Menu ‡ Settings ‡ Convenience ‡ Airplane Mode.

2. At the message, press

3. Highlight an option and press

- Enabled-Activate Airplane mode.

- Disabled-Deactivate Airplane Mode and return the phone to normal state.

Dealing with missed calls

When you have missed a call, „Missed“ appears on your screen unless the

caller leaves a voicemail.

• To view the caller‘s number or name, select Missed Calls. In the Recent

Calls list, the missed call is indicated with a flashing

• Press or to clear the screen.

• If the caller left a voicemail message, select Call.

Setting missed call alerts

You can set an alert to beep every five minutes after you have missed a call.

• Select Menu ‡ Settings ‡ Sounds ‡ Missed Call ‡ Enabled.

• To turn off the alert when it rings, press

• To cancel the alert, select Menu ‡ Settings ‡ Sounds ‡ Missed Call ‡

Disabled.

Viewing recent call details

Details on the last 29 calls you made or received are stored in the lists under

the Recent Calls menu. You can get details on the caller‘s name and phone

number, along with the time and length of the call. Icons indicate the types of

calls in the list.

Outgoing call

Incoming call

Forwarded call

Three-way call

Missed call (flashing)

Viewing recent calls

ꢀ. Select Menu ‡ Recent Calls.

2. Select a list: Incoming Calls, Outgoing Calls, Missed Calls,

or Erase Lists.

3. Select a recent call item.

4. Select an option:

- Time-Show the time of the call.

- Number-Show the caller‘s number (for an incoming call), or the number

you called (for an outgoing call).

- Prepend-Place the cursor at the beginning of the phone number so you

can add an area code, if you plan to save the number as a contact.

- Save New-Save the phone number as a contact.

- Add to-Add the phone number to a saved contact.

Note: If the phone number has been classified as „secret,“ you must enter

your four-digit lock code to view or edit it. For information on the lock code,

see „Changing your lock code“ on page 48.To classify a phone number as

secret, see „Saving a contact entry“ on page 32.

Erasing recent calls

ꢀ. Select Menu ‡ Recent Calls ‡ Erase Lists.

2. Select an option: Incoming Calls, Outgoing Calls, Missed Calls,

or Erase All.

3. Press

right and press

to select Yes.

Speed dialing

Speed dialing allows you to quickly dial a stored phone number by entering

a one- or two-digit speed dialing location number and pressing

Note: Before you can use speed dialing, you must save a phone number as

a contact and assign a speed dial location to it.

• To save a phone number as a new contact and add a speed dial location,

see „Saving a contact entry“ on page 32.

• To add a speed dial location to a saved contact, see „Editing or erasing a

contact“ on page 33.

Using speed dialing

To call a contact that has a speed dial location:

• From the home screen, enter a one- or two digitspeed dialing location and

press

1-Touch Dialing

ꢀ-Touch Dialing is the fastest way to speed dial a contact that has a speed

dial location.

Note: You must (ꢀ) enable ꢀ-Touch dialing on your phone and (2) have a

speed dial location assigned to a contact. To assign a speed dial location to

a contact see „Saving a contact entry“ on page 32 or „Editing or erasing a

contact“ on page 33.

Enabling 1-Touch dialing

ꢀ. Select Menu ‡ Settings ‡ Convenience ‡ 1-Touch Dialing ‡

Enabled.

2. Press

Using 1-Touch Dialing

To call a contact that has a speed dial location:

• From the home screen, press and hold aspeed dialing location. If it is

a two-digit location, press the first digit briefly, then press and hold the

second digit. For example, if the speed dialing location is ꢀ5, press

briefly, then press and hold

Setting up voicemail

Before your phone can receive voicemail messages, you must set up a pass-

word and record a personal greeting with Verizon Wireless. When you have

set up your voicemail, all unanswered calls to your phone are automatically

transferred to voicemail, even if your phone is in use or turned off.

ꢀ. From the home screen, enter

2. Press to interrupt the notification.

3. Follow the system prompts to create a password and record a greeting.

Note: If you are having trouble accessing your voicemail, contact Verizon

Wireless.

Checking voicemail messages

When a voice message is received, your screen will display a notification:

„New Message [x]Voicemail.“ This text will remain for about five minutes. After

that, look for the

symbol at the top of your screen. The symbol flashes if

the message is urgent.

If you see „New Message“ on your screen

ꢀ. Press

2. Press

to select Call. This initiates a call to your voicemail number.

to interrupt the notification.

3. Follow the prompts to retrieve the message.

If you see the

symbol

ꢀ. Press

to initiate a call to your voicemail number.

2. Follow the prompts to retrieve the message.

Note: You can set the phone to beep, light up, or play a tune every five

minutes to remind you that you have voicemail.

Locking the keypad

The Keyguard locks your keypad and side button son your phone to prevent

accidental keypresses when the phone is turned on and a call is not in

progress. You can still answer or silence an incoming call.

• To lock the keypad, select Menu ‡ Settings ‡ Keyguard ‡ Guard now.

• To unlock the keypad, press

in this order.

Changing the keyguard setting

ꢀ. Select Menu ‡ Settings ‡ Keyguard.

2. Highlight an option. You can set the phone to lock the keypad immedia-

tely, or automatically if no key is pressed after 30 seconds, ꢀ minute, or 5

minutes.

3. Press

to save.

Tracking calls

You can track the number and duration of calls made and received on your

phone.

ꢀ. Select Menu ‡ Settings ‡ Call Information.

2. Select a timer:

- Recent Calls-Tracks all calls made and received by your phone since

this timer was last reset. To reset this timer, highlight Reset and press

- All Calls Timer-Tracks all calls made and received by your phone. This

timer cannot be reset.

- Kbyte Counter-Tracks the kilobytes of data sent and received by

your phone. It counts only SO 33 packet data. When the total reaches

999,999kb, the counters reset automatically. To reset this counter manu-

ally, highlight Reset and press

Timing your calls

You can set your phone to beep ꢀ0 seconds before each minute passes

when you are on a call.

• Select Menu ‡ Settings ‡ Sounds ‡ Minute Alert ‡ Enabled.

Receiving data or faxes

Your phone may be able to receive certain data or faxes, depending on the

system sending the information. You can not receive voice calls while the

phone is in data/fax mode. For more information, see „Data settings“ on page

5ꢀ.

Setting roaming alerts and ringers

Setting an alert for roaming

You may use this setting if you want the phone to alert you when you roam

outside of your home service area.

ꢀ. Select Menu ‡ Settings ‡ Network ‡ Roam/Svc Alert.

2. Select an option and press

- When no svcalerts you with three tones decreasing in pitch when ser-

vice is lost and three tones increasing in pitch when service is acquired

again.

- Roam Change alerts you with two decreasing tones when roaming

service is acquired and three increasing tones when home area service is

acquired again.

- Any Changealerts you with three increasing tones if there is a change

inroaming service or three decreasing tones if the phone loses service.

Setting the roam ringer

You can set a ringer to indicate when an incoming call will be subject to

roaming charges.

ꢀ. Select Menu ‡ Settings ‡ Sounds ‡ Roam Ringer.

2. Highlight Enabled and press

3. Press to set the ringer.

. You‘ll hear a sample of the ringer.

Setting Call Guard to avoid roaming calls

You can set your phone to warn you before you answer or place a call while

roaming.

• Select Menu ‡ Settings ‡ Convenience ‡ Call Guard ‡ Call prompt.

The phone makes a distinctive ring to indicate an incoming call while you are

roaming, and you must press

roaming.

to accept the call or to place a call while

Controlling network roaming

Specifying digital or analog mode

You may force the phone into either digital or analog mode. This is useful if

you are in an area that borders on digital service and the automatic feature is

causing the phone to keep switching between modes.

ꢀ. Select Menu ‡ Settings ‡ Network ‡ Digital/Analog.

2. Select an option and press

- Automatic automatically switches the phone between digital and analog.

- Analog only sets the phone to work in analog mode only.

- Analog callforces a call into analog mode for the duration of the next

call.

- Digital only sets the phone to work in digital mode only.

Turning roaming on or off

This setting allows you to control the phone‘s roaming feature by specifying

which signals the phone will accept.

ꢀ. Select Menu ‡ Settings ‡ Network ‡ Roam Option.

2. Select an option and press

- Automatic (recommended setting) accepts any system the phone ser-

vice provides.

- No Roamingprevents you from making or receiving calls outside of

your home service area.

Note: If your phone has more than one setting for Automatic, contact Verizon

Wireless to determine which one to use.

13. ENTERING LETTERS, NUMBERS, AND SYMBOLS

You can enter letters, numbers, and symbols in contacts, text messages, and

your banner.

Understanding text entry screens

The current text entry mode (and capitalization setting, when applicable) are

indicated by icons.

Text entry modes

There are four text entry modes:

Number mode

Normal text mode

Rapid text entry mode

Symbol mode

Note: The mode you start in depends on the task you are doing. For exam-

ple, when entering a phone number, you‘re in number mode. When entering

a name for a contact, you‘re in normal text mode.

Entering numbers

• To enter a number while in

mode, press a number key once.

or mode, press and hold a number key

• To enter a number while in

until the number appears on the screen.

Entering words letter by letter

Use normal text mode to enter letters.

ꢀ. Press a key once for the first letter, twice for the second letter, and so on. If

your phone is set to Spanish, French, or Portuguese, accented letters are

available.

2. Wait for the cursor to move right and enter the next letter.

Entering words quickly

When you press a series of keys using

mode,

checks its dictionary

of common words and guesses at the word you are trying to spell.

ꢀ. For each letter of the word you want, press the key once. For example, to

enter the word„any“ press:

‡

2. If the word doesn‘t match what you want, press

matches.

to look at other word

3. When you see the word you want, press

Entering symbols

While entering text, you can enter symbols by pressing

until you see

the symbol you want.Using this method, you have access to the following

symbols:

. @ ? ! - , & : ‚

To access the full set of symbols:

ꢀ. Press

menu.

right to highlight the current mode and press

to enter the

2. Select

3. Press

Symbols.

down to view the list of symbols.

4. Press the number key corresponding to the symbol you want.

Changing modes

Sometimes you need to change modes. For example, to enter numbers in an

email address while in

mode, you must change to

mode, enter the

numbers, and then change back to

mode to complete the address.

To change text entry modes, you can either:

• Press and hold

until the icon for the mode you want appears.

-or-

• Press

right to highlight the current text mode, press to enter the

menu, then select a different mode.

Capitalization settings

Three capitalization settings are available in

and

modes:

Capitalize next letter

Lower case next letter

Capitalize first letter of every word (in a contact) or sentence (in a text

message) If no icon appears, all letters will be in lower case.

To change capitalization settings:

• Press

until the icon for the setting you want appears.

Quick reference to text entry

This table gives general instructions for entering letters, numbers, and

symbols.

To...

Do this...

Use

Enter a letter

mode and press a key until

you see the letter you want. For more

information, see page 29.

Enter a number

Enter a symbol

Use

mode and press a key once

to enter its number. For more options,

see page 29.

Use

mode and press

until

you find the symbol you want. See

page 30.

Enter a space

Press

Erase a character

Erase all characters

Press and hold

Press up or down.

Press and hold

Move the cursor right or left

Change text entry modes

Capitalize the next letter

mode, press

. Choose

Lowercase the next letter

mode, press

Capitalize the first letter of each

word

. Choose

Highlight an option at the bottom

of the screen

Press

left or right.

3ꢀ

14. STORING CONTACTS

Use your phone‘s Contacts directory to store information about a person or

company. Your phone can hold, on average, about 200 phone numbers.

Saving a contact entry

To save a contact, take these steps.

ꢀ. From the home screen, enter the phone number you want to save.Tip:

Enter the area code with the phone number so that you can dial it from any

service area.

Note: To save a contact without entering a phone number, select Menu ‡

Contacts ‡ Add New, select an option, and skip to step 3.

2. Press

to select Save New.

3. Enter a name for the contact. If you need to learn how to enter letters,

see page 29. Either save the contact now or assign options. To save now,

press

-or-

to select Save.

To assign options, press

right twice, then press

to select Options.

Press up or down to highlight an option:

- Save - Save the information and return to the home screen.

- Assign Ringeror Unassign Ringer - Select or remove a ringer to identify

an incoming call from this contact.

- Assign Pictureor Unassign Picture - Select or remove a picture to iden-

tify an incoming call from this contact.

- Number Type- Select work, home, mobile, pager, or fax. The number

type will appear as an icon next to the numberin the Contacts list. For

icons, see page 35.

- Add Voice Dial - Speak the name of the contact person for this number so

that you can dial it using voice recognition (VR). For more information, see

page 37.

- Speed Dialing- Select a speed dialing location from the list.

- Secret- Select Yes to lock the phone number. If a phone number is lo-

cked, youmust enter your four-digit lock code (see page 49) to view or edit

the number.

- Primary Number-Classify this number as the primary number for the

contact.

- Classify Contact- Classify the contact as Personal or Business. (See

page 4ꢀ to set the phone to ring differently for personaland business calls.)

4. Press

to select Save. A check mark and the word „Saved“ appear.

Adding a code or extension

When you save the phone number of an automated service, you may include

a pause where your phone would stop dialing; for example, where you would

wait to dial an extension.

ꢀ. Enter the first portion of the phone number.

2. Press

3. Press

right to scroll through the options at the bottom of the screen.

to select a type of pause.

A Time Pause - Stops dialing for two seconds, then continues to dial.

A Hard Pause - Stops dialing until you select Release.

4. Enter the remaining numbers.

5. Select Save New.

Editing or erasing a contact

To make changes to a contact, take these steps.

(To erase all saved contacts, see page 50.)

ꢀ. Select Menu ‡ Contacts.

2. Select View All or Find Name to find the contact you want to edit.

3. Highlight the contact to edit and press

4. Select Options.

5. Highlight an option and press

to select it:

- Add New to add a number, address, or note.

- Assign Ringer or Unassign Ringer to select or remove a ringer to

identify an incoming call from this contact.

- Assign Pictureor Unassign Picture to select or remove a picture to

identify an incoming call from this contact.

- Erase Contact to erase the entire contact.

- Edit Name of the contact.

- Classify Contact as personal or business.

- Exit without making changes.

6. Enter the new information.

7. Press

to select Save, if necessary.

Editing a phone number

ꢀ. Select Menu ‡ Contacts.

2. Select View All or Find Name to find the contact you want to edit.

3. Highlight the contact to edit and press

4. Press

press

down to highlight the phone number you want to edit and

5. Highlight an option for the phone number and press

- Send Text Msg - Send a text message to the phone number you selected.

- View Number - See the phone numberyou selected.

- Add Voice Dial- Speak the name of the contact person for this number so

that you can dial it using voice recognition (VR). For more information, see

page 53.

- Speed Dialing- Assign or remove the location you use to speed dial the

number.

- Edit Type- Assign a type: work, home, mobile, pager, or fax. The type

icon appears next to the phone number in the Contacts list.

- Erase Number - Erase the number from the contact.

- Erase Voice Dial - Erase the voice dial name associated with the number.

- Edit Number - Change the phone number.

- Edit Voice Dial - Record a new voice dial name.

- Secret - Make the number secret so that it will not appear on the screen

until the lock code is entered. Secret numbers can be called without a lock

code. (For more information, see „Restricting calls“ on page 49.)

- Primary Number- Make this number the first one that shows up when you

open the contact.

- Prepend - Move the cursor to the beginning of the number so you can add

the area code.

- Exit - Exit without making changes.

6. Enter the new information and follow the prompts.

7. Press

to select Save, if necessary.

Finding contact information

To find a phone number or contact, either search the Contacts directory or

use Fast Find.

Searching the Contacts directory

ꢀ. Select Menu ‡ Contacts.

2. Select a search method:

- View All - List all contacts saved in your phone‘s Contacts directory.

- Find Name- Locate a specific name. Enter part of the contact name, then

select Find.

- Speed Dial List, Voice Dial List, Business List, or Personal List - Select

a contact from a list.

3. Scroll down until you find the name you want, then press

- To call the contact, highlight the number and press

- To display contact information, press

Setting Fast Find

With Fast Find, you press one or two keys to view close matches of the

number you are looking for.

• From the home screen, select Menu ‡ Settings ‡ Convenience ‡ Fast

Find ‡ Enabled.

Using Fast Find

ꢀ. From the home screen, press the key‘s corresponding to the letters of

the name you want to find. A matching contact or speed dial entry appears.

Press

down to scroll through matching entries.

2. View the name you want, then press

to view contact details.

to call the number or press

Viewing contacts

The following icons may appear next to information in your phone‘s contact

entries.

work

email address

home

mobile

street address

Web page URL

Note

pager

fax

15. SENDING AND RECEIVING TEXT MESSAGES

This chapter describes how to send, receive, and erase text messages from

your phone. For information on voicemail messages, see page 25.

Important: The features and menus described in this chapter may vary de-

pending on services available in your area. In addition, usage charges may

apply to each message.

Sending text messages

You can only send text messages to phones that are capable of receiving

them, or to email addresses.

Writing a message

To send a text message to a single recipient:

ꢀ. Press

down to open the Messages menu.

2. Highlight Send New and press OK.

3. Choose a method to enter the recipient‘s phone number or email address:

- Select a saved number from the Recent List or Contacts List, or select

a Group List you have created. For more about group lists, see page 4ꢀ.

Enter a New Address manually. (To learn how to enter text, see page 29.)

4. To add another recipient to this message, choose a method:

- Press right to select Options.Then select Recent List, Contacts, or

Group Lists.

- Enter a space or comma after the first number. Then enter another recipi-

ent manually.

Note: You can send a message to up to ꢀ0 contacts at once. The messages

will be sent one at a time, once to each addressee.

5. When you are done entering addresses, highlight Next and press

6. Enter the message. To learn how to enter text, see page 29. To add special

features such as smiley faces, see „Including pictures, sounds, and pre-

written text“ on page 36.

Note: You may be charged for more than one message if your message

exceeds acertain number of characters. For more information, see „Under-

standing appended messages“ on page 38.

7. When you have completed the message, press

to select Send.

Including pictures, sounds, and prewritten text

You may include smiley faces, sounds, and prewritten text in your text

messages.

ꢀ. Create a text message and enter addresses.(See page 35.)

2. Select Next to advance to the message text entry screen.

3. From the text entry screen, press

and select from the options:

right twice, select Options ‡ Insert

- My Sounds- Add a sound or melody. Highlight one from the list and

press to select Insert.

- My Pictures- Add a graphic you have received in a text message, crea-

ted using Doodler^TM, or downloaded to your phone. Press

right or left

to scroll through graphics and press to select Insert.

- Emoticons- Select a smiley face icon. If the recipient‘s phone does not

support the same technology as your phone, the icons will appear to

them in a simplified form.

Tip: Press and hold

entry screen. Highlight one and press

- AutoText- Select a prewritten message. Highlight one from the list and

press to select Insert. (To edit or create new prewritten messages,

to cycle through emoticons while in the text

to select Insert.

see page 42.)

- Contacts - Add information about a saved contact. Highlight the contac

from the listand press

to insert it.

4. When you have completed the message, you can send it immediately or

set sending options. To send it immediately, press

set sending options, see the following procedure.

to select Send. To

Setting sending options

When you are ready to send a message, you have several options for how

and when you want the message to be received.

ꢀ. Once you have completed the message, press

Options and press . Then choose from the list:

right to highlight

- Insert - Enhance your message with sounds, graphics, smiley faces, pre-

written text, or contact information. See options under „Including pictures,

sounds, and prewritten text“ on page 36.

- Add Address- Return to the „To“ screen to add another recipient without

losing the message text. Enter the new address, then select Next to return

to the message entry screen.

- Set Priority - Label the message as „Urgent.“

- Callback Number- Include a callback number with the message to let

the recipient know at what number they can call you back. Select Yes to

include your own number, or Edit to enter a different callback number.

- Send Later - Schedule when to send the message.

- Save Message- Save the message in your Saved folder. This prevents the

message from being deleted if you have activated AutoErase, and enables

you to send the message to others.

- Save AutoText- Save the message you have just entered as a prewritten

message, then return to the message entry screen so you can send the

message.

2. When you have finished setting options, press to return to the message

window.

3. Highlight Send and press

Adding a signature

This setting allows you to create signature text. The signature does not

appear in the message creation screen; however, the signature is included at

the end of all outgoing messages.

To create a signature

ꢀ. Select Menu _ Settings _ Msg Settings _Signature.

2. Enter your signature in the text field.

3. Press

to save the setting.

Note: The signature text is tallied by the character counter because the

signature is included in the text field.

If you cannot send messages

You may not be able to send or receive messages if your phone‘s memory is

nearly full, or if digital service is not available at the time. To free up memory,

erase old messages. See „Erasing messages“ on page 4ꢀ.

Understanding appended messages

If you go over the character limit for a single message, the phone may auto-

matically append a nempty segment to your message to make space.

Important: You will be charged for each message segment.

When you start a message, the maximum character limit („ꢀ54“ in the

example) appears above the text entry screen. This number counts down as

you enter characters, until it reaches 0. If you continue to enter text after this

counter reaches 0, a message segment may be appended. If a segment is

appended, a message will appear on the phone screen.

Receiving incoming calls while creating messages

You may receive calls while creating messages.

Text entry field

Characters remaining Messaging

Standard call

When a standard call comes in, the phone rings and an incoming call mes-

sage appears on the screen.

• If you don‘t wish to answer the call,select Ignore.

• To answer the call, press

. The message you were working on will be

saved in the Saved folder. To return to the message, press

down to open

the Messages menu, select Saved and select the message.

Viewing the OutBox

Your sent messages are automatically saved to the OutBox.

To view the OutBox:

ꢀ. Press

down to open the Messages menu.

2. Select OutBox.

3. Press

up or down through the list of messages. One of the following

symbols appears next to each message:

The message is pending and will be sent when possible.

You can cancel delivery oft he message.

The scheduled message will be sent at the scheduled time.

You cannot cancel deliveryof the message.

The message cannot be sent because service is not available.

An alert appears on your phone if the message cannot be sent.

The scheduled message has been sent and will be delivered as

scheduled. You cannot cancel delivery of the message.

The message has been received by the recipient you specified.

The message has been received and opened by the recipient you

specified. (This symbol may not be available.

Check with Verizon Wireless.)

The message has been sent to more than one recipient.

The message has never been sent, or has not been sent since it was

last modified. You can cancel delivery of the message.

Retrieving text messages

When a text message is received, your screen will display text similar to:

„New message ꢀ Text Msg“. This text will remain for about five minutes. Af-

terthat, look for the

symbol at the top of your screen. The symbol flashes

if the message is urgent. If your phone is set to Direct View, the body of the

message will appear on the phone screen automatically.

To activate Direct View,:

• Select Menu ‡ Messages ‡ Msg Settings ‡ Direct View ‡ Enabled.

If you see the „New Message“ note

You can choose to:

• View the message - Press

• Ignore the message - Press

• Clear the screen - Press

. twice andscroll down.

right and press

If you see the body of the message (Direct View)

The body of an incoming message will appear on your home screen only if

your phone is set to Direct View.

You can choose to:

• Ignore the message - Press

• Read the message. See „Reading the message“on page 40.

Note: If you receive a new message while you are reading a message, the

one you are reading will be replaced by the new one. You can find the older

message in the InBox: Press down to open the Messages menu and select

Inbox.

If you see the

symbol

If the

symbol is blinking, the message is urgent.

ꢀ. Press

down.

2. Select Inbox. A list of all your received messages appears. New, unread

messages appear in bold.

3. Press

4. Press

up or down to scroll through the list of messages.

to read a message.

Reading the message

Note: Sounds embedded in text messages will not play if the phone is set to

Silence All mode.

ꢀ. If the text message is long, press

down to view the entire message.

Note: Message length is limited by Verizon Wireless. An incoming mes-

sage that exceeds the limit may be truncated.

2. When you are finished, you can Reply to the sender, Play the sound em-

bedded in the message, Erase the message, Save the message to your

Saved folder, or set additional Options for the message:

- View Sender information.

- Forward the message.

- Reply with Copyto reply to the message with a copy of the original

attached.

- Save Object(s), such as sound or pictures, from the message. (This option

is available if the incoming message includes a graphic or sound.)

- Save Contactto save the sender‘s phone number or email address in your

Contacts list. (This option is available if a vCard is included in the message.)

- Save as AutoTextto save the text from the message as AutoText, which

you can insert into other messages. Graphics and sound will not be saved

as part of AutoText. (For more about AutoText, see page 42.)

3. Select Done.

Note: The

symbol indicates:

•

A graphic did not come through. It may be too large or incorrectly formatted.

• An appended message is missing. (For more about appended messages,

see page 38.)

Setting message alerts

You can set your phone to alert you of incoming text messages or pages. For

more information, see „Setting message alerts“ on page 50.

Erasing messages

Your phone is designed to store 99 text messages and pages. It is a good

idea to erase old messages, as messages take up memory in your phone.

You have the option of erasing text messages and pages as you send or

read them, erasing the mone-at-a-time from the list in the OutBox or InBox,

or erasing them all at once.

Erasing single messages

ꢀ. Press

down to open the Messages menu.

2. Press

down and press to select the type of text message you want

to erase (InBox, OutBox, or Saved).

3. Press

to select the message to erase.

4. Select Erase to erase the message. A notification appears: „Erase this

message?“

5. Select Yes to erase the message.

Note: You can erase a scheduled message from the OutBox, but you cannot

cancel delivery of the message.

Erasing all messages

ꢀ. Press down

2. Select Erase Msgs.

3. Press up or down and press

- InBox erases all messages in your InBox.

to open the Messages menu.

to select an option:

- OutBox erases all messages in your OutBox.

- Saved Folder erases all messages in your Saved folder.

- All Messages erases all text messages in all folders listed above.

4. A notification appears: „Erase all messages?“ Select Yes to erase messa-

ges or No to cancel.

Erasing messages automatically

Use this setting to have old messages automatically erased from the InBox

when memory is low.

4ꢀ

ꢀ. Press

2. Select Msg Settings ‡ Auto-Erase Text.

3. Press to select Old InBox Msgs.

down to open the Messages menu.

Customizing message settings

To make messaging easier, you can customize settings for sending and

receiving messages.

Creating group lists

You can create and save a list of multiple recipients. Your Ex-CDMA 02

phone will store five group lists with up to ꢀ0 recipients per list.

ꢀ. Press

down to open the Messages menu.

2. Select Group Lists ‡ Create New.

3. Enter a name for the list. For help entering text, see page 29.

4. Press

to select Next.

5. To enter the first phone number or email address, select an option:

- Recent List - Select numbers from your Recent List.

- New Address- Enter the phone number or email address yourself. To

learn how to enter text, see page 29.

- Contacts List - Select contacts from your phone book.

6. To enter the next address, enter a space or comma after the first number

or email address. (If you insert a saved contact or a number from the

Recent List, the phone will insert the comma automatically.) Then press

right twice, select Options, and choose from the options.

7. When finished, press

right and press

to select Done.

8. To send a message to your new group, see „Sending text messages“ on

page 35.

Creating and editing prewritten messages (AutoText)

Your phone comes with prewritten (AutoText) messages, such as „Please call

me“, which you can insert into the body of a text message. You can edit the-

se messages and create new ones. Your phone will store up to 20 AutoText

messages, withup to ꢀ00 characters per message.

ꢀ. Press

down to open the Messages menu.

2. Select Msg Settings ‡ Edit AutoText.

3. To create a new pre-written message, highlight New AutoText and press

-or-

To edit an existing pre-written message, highlight the message and press

4. Enter or edit the text and press

see page 29.

to select Done. For help entering text,

Note: You can also save a message you are writing or an incoming message

as AutoText. For directions, see „Setting sending options“on page 37 or

„Reading the message“ on page 40.

Switching default text entry mode

You can set the default text entry mode to appear in message text entry

screens.

ꢀ. Press

down to select the Messages menu.

2. Select Msg Settings ‡ Default Text.

3. Select Normal Alpha or Rapid Mode.

For more information on text entry modes, see page 29.

16. CUSTOMIZING YOUR PHONE

The contents of the Settings menu are as follows.

Silent Mode

Vibrate Only

Vibrate, Ring

Lights Only

Display

Call Information

Recent Calls

All Calls Timer

Kbyte Counter

Msg Settings

Voicemail Num.

Alerts

Backlighting

My Banner

Flashing Lights

Signature

Norm. Sounds

Information

Keyguard

Main Menu View Network

Edit AutoText

Callback Number

Msg Receipt

Direct View

Save to Outbox

Auto-Erase

Default Text

Accessories

Pwr Backlight

Headset Ring

Auto-Answer

TTY Device

Screen Saver

Wallpaper

Color Themes

Auto-Hyphen

Language

Data/Fax Calls

Privacy Alert

Set Phone Line

Roam/Svc Alert

Roam Option

Digital/Analog

Location

Sounds

Ringer Volume

Ringer Type

Business Ring

Personal Ring

Roam Ringer

Earpiece Volume

Key Volume

Key Length

Missed Call

Smart Sound

Minute Alert

Spkrphone Vol.

Time Format

Contrast

Voice Services

Add Voice Dial

Convenience

Airplane Mode

Erase Voice Dial Shortcut Key

Voice Training

Voice Wake-Up

Voice Answer

Security

Fast Find

ꢀ-Touch Dialing

Web Prompt

Call Guard

Com Speed

Lock Phone

Limit Calls

Lock Code

Erase Contacts

Emergency #‘s

Silencing all sounds

Your phone is set to make sounds when you receive calls, press keys, na-

vigate through menus, and receive alerts (such as new messages). You can

silence all sounds and set the phone to vibrate or light up when you receive

calls and alerts.

Setting the phone to vibrate or light up

ꢀ. Select Menu ‡ Settings ‡ Silent Mode.

2. Choose an option and press

- Vibrate Only- Causes the phone to vibratef or the duration of the

incoming call or other alert. appears.

- Vibrate, Ring-Causesthe phone to vibrate for the first ꢀ0 seconds and

then ring for the remainder of the incoming call or other alert. appears.

- Lights Only- Causes the phone to light up for the duration of the

incoming call or other alert. appears.

- Norm. Sounds - Causes the phone to ring for the incoming call or alert.

3. Press

to return to the home screen.

Note: The phone will ring when it is attached to an external power source

(such as a charger), even if all sounds have been silenced.

Turning sounds back on

To restore all sounds to the phone:

• Select Menu ‡ Settings ‡ Silent Mode ‡ Norm. Sounds.

The

disappears. The phone will now ring for incoming calls and

alerts.

Choosing a different ringer

Your ecom Ex-CDMA 02 phone has ꢀ5 ringers you can choose to use for

incoming calls.

ꢀ. Select Menu ‡ Settings ‡ Sounds ‡ Ringer Type.

2. Scroll down the list to hear the different ringers.

3. Press

to select a ringer from the list.

Specifying ringers for different callers

You can assign ringers to individual phone numbers saved in your Contacts

directory.

• To assign a ringer to an individual contact, see page 32.

• To assign a ringer to a class of contacts:

a. Select Menu ‡ Settings ‡ Sounds.

b. Highlight Business Ring or Personal Ring and press

c. Select a ringer and press

Note: To classify a contact as Business or Personal, see page 32.

Importing additional ringers

You may be able to download ringers over the air. Check with Verizon Wire-

less.

Adjusting volume

You can adjust the volume of the earpiece, the speakerphone, the ringer, or

the tones you hear when the keys are pressed.

Adjusting the earpiece volume

• To adjust the earpiece volume manually during a call, press

to find a comfortable level.

up or down

• To adjust the earpiece volume for all calls:

a. Select Menu ‡ Settings ‡ Sounds ‡ Earpiece Volume.

b. Press

up or down.

c. Press

to save the setting.

Adjusting the speakerphone volume

• To turn the speakerphone on or off during a call, press the speakerphone

button on the top of the phone once.

• To adjust the speakerphone volume manually during a call, press the volu-

me button on the side of the phone up or down.

• To adjust the speakerphone volume for all calls:

a. Select Menu _ Settings _ Sounds _Spkrphone Vol.

b. Press

up or down.

c. Press

to save the setting.

Adjusting the ringer volume

To adjust the ringer volume for incoming calls as well as the alerts for the

Countdown Timer, Scheduler, and Alarm Clock:

ꢀ. Select Menu ‡ Settings ‡ Sounds ‡ Ringer Volume.

2. Press

right or left.

3. Press

to save the setting.

Changing the key tones

You can change the volume and duration of the tones the phone makes

when you press the keys.Select Menu ‡ Settings ‡ Sounds and choose

Key Volume or Key Length.

Using shortcuts

From the home screen, you can access shortcuts by pressing the navigation

key in different directions. Three shortcuts are automatically programmed

into your phone:

Left launches Mobile Web.

Right launches Get It Now.

Down launches Contacts.

For the fourth direction (up), you can set a shortcut to one of the features of

your phone.

Defining the feature shortcut (up)

ꢀ. Select Menu ‡ Settings ‡ Convenience ‡ Shortcut Key.

2. Highlight the feature you want a shortcut to, and press

to select it.

Using the feature shortcut

• From the home screen, press and hold

up.

Choosing a different language

Your phone may display alternative languages.

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Language.

2. Select a language, and press

Personalizing the screen Changing your banner

The banner is the personal label for your phone. It appears on the home

screen above the time and date. The banner can be up to ꢀ4 characters long.

ꢀ. Select Menu ‡ Settings ‡ Display ‡ My Banner.

2. Select Edit.

3. Press to clear the screen.

4. Enter your new text.

5. Press

to save.

Choosing a different menu view

You can change the appearance of the menus you see when you select

Menu from the home screen.

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Main Menu View ‡ Graphic or

List.

2. Press

The next time you press

to return to the home screen.

, you will see the menu view you selected.

Adjusting the backlighting

Your screen lights up while you are in a call or when you press a key on the

keypad. However, you can change when and how backlighting lights up.

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Backlighting.

2. Select an option from the list:

- 5 seconds, 10 seconds,or 30 seconds - (Default) Turn backlighting on

for 5, ꢀ0,or 30 seconds after your last keypress.

- 5 sec/in call, 10 sec/in call,or 30 sec/in call - Turn backlighting on

for the duration of a call, and for 5, ꢀ0, or 30 seconds after your last

keypress.

Note: These three settings drain the battery more quickly and reduce talk

and standby times.

Setting power backlighting

You can set backlighting to remain on when an external power source, such

as the AC adapter, is used with the phone.

Note: Power backlighting may not be available with some accessories.

ꢀ. Select Menu ‡ Settings ‡ Accessories ‡ Pwr Backlight.

2. Select Always On to keep backlighting on. (The battery charges more

slowly when powerbacklighting is on.)

Setting backlighting to flash

You can set the backlighting on your phone to flash in a certain style when

an incoming call is received. When this setting is activated, the lights will

flash even if you silence the ringer.

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Flashing Lights.

2. Select from Fast Flash, Slow Flash, Heartbeat, or Rhythm. As you

highlight the options a sample of each flash is provided.

3. Press

to select your option.

Caution: A small percentage of users may be photo sensitive to flashing

lights. In rare cases, exposure to flashing lights, under certain circumstances,

may produce seizures. While such an event is not known to occur with mo-

bile phoneuse, and the Ex-CDMA 02 phone has been designed to minimize

the possibility of any such occurrence, those who believe they may be photo

sensitive should not enable the Flashing Lights feature.

Changing the display contrast

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Contrast.

2. Select the level of contrast you want.

Setting numbers to auto-hyphenate

Auto-hyphenation is a setting that automatically inserts hyphens into your

phone numbers to be consistent with the U.S. dialing plan.

For example, ꢀ-222-333-4444.

• Select Menu ‡ Settings ‡ Display ‡ Auto-Hyphen ‡ Enabled.

Selecting a screen saver

Screen savers work only from the home screen, and they are activated ꢀ0

seconds after the last keypress. Incoming calls and alerts override screen

savers.

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Screen Saver.

2. Highlight a screen saver and press

3. Press to return to the home screen and wait ꢀ0 seconds to view the

screen saver you chose.

Selecting wallpaper

Wallpaper appears on the home screen when the phone is not in use.

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Wallpaper.

2. Highlight a wallpaper design and press

3. Press to return to the home screen and view the wallpaper you chose.

Selecting a color theme

You can select a color theme to display on your phone.

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Color Themes.

2. Scroll through the options to see samples of the color themes.

3. Highlight a color theme from the list and press

4. Press to return to the home screen.

Choosing a different time/date format

ꢀ. Select Menu ‡ Settings ‡ Display ‡ Time Format.

2. Highlight the option you want.

Creating a secure environment

This section describes all the features involved in securing your phone and

preventing access to personal information. All security features are shielded

by a four-digit lock code.

Changing your lock code

The lock code is typically preset to 0000 or the last 4 digits of your phone

number. To change your lock code, take these steps:

ꢀ. Select Menu _ Settings _ Security.

2. Enter your four-digit lock code and select LockCode. A message appears:

„Change Code?“

3. Select Yes and enter a new four-digit code. Enter your new lock code

again.

Locking your phone

When your phone is locked, you can call only emergency numbers or a

Verizon Wireless number.

ꢀ. Select Menu ‡ Settings ‡ Security.

2. Enter your four-digit lock code.

3. Select Lock Phone.

4. Highlight an option:

- Never - Does not lock the phone.

- On power up - Locks the phone every time you turn it on.

- Now - Locks the phone immediately.

5. Press

Unlocking the phone

ꢀ. From the home screen, press

2. Enter your four-digit lock code.

to select Unlock.

Designating emergency numbers

The emergency numbers feature allows you to specify three personal phone

numbers that can be called when the phone is locked.

ꢀ. Select Menu ‡ Settings ‡ Security.

2. Enter your four-digit lock code.

3. Select Emergency #‘s.

4. Select an Unassigned slot.

Note: Enter the phone number, including the area code. Do not enter ꢀ

before the area code.

5. Press

to select Done.

Notes:

• You can view these numbers only when they‘re being

entered for the first time.

• You cannot edit these numbers.

• To make a call to an emergency number from a locked phone, you must

dial the number (including area code) exactly as it was stored in Emergen-

cy Numbers.

Restricting calls

You can restrict the calls that can be made from your phone to only those

that have been saved in your Contacts.

ꢀ. Select Menu ‡ Settings ‡ Security.

2. Enter your four-digit lock code.

3. Select Limit Calls.

4. Select Limit Out.

Erasing all contacts

ꢀ. Select Menu ‡ Settings ‡ Security.

2. Enter your four-digit lock code.

3. Select Erase Contacts.

4. Select Yes to erase all contacts. A message appears: „Erase ALL

contacts?“

5. Select Yes to erase all contacts.

Setting message alerts

You can choose how you want to be alerted of incoming voicemail, pages, or

text messages.

ꢀ. Select Menu ‡ Settings ‡ Msg Settings ‡ Alerts.

2. Select the type of alert: Message Alert, Net Alert, Page Alert, or Voice-

mail Alert.

3. Press

to select an option:

- Vibrate, Beep, Hiya!, Rock!,or Happy - Set the phone to vibrate, beep, or

play a tune once when a new message is received.

- Options with remind - Set the phone to notify you once when a new

message is received and then notify you again every five minutes. To stop a

reminder alert, press

to select Ignore.

- Disabled - Turn off message alerts.

Setting alerts for your headset

When a headset (not usable in hazardous area) is attached to the phone, you

can set alert sounds to originate from the headset.

ꢀ. Select Menu ‡ Settings ‡ Accessories ‡ Headset Ring.

2. Select Out of headset to have alerts originate from the headset.

Network settings

Switching between phone lines

Your phone can have two service accounts, or phone lines, associated with

it. Each phone line has its own phone number. When you are using one line,

you cannot receive calls from the other.

It would be as if the phone were „off“ for that number. Your voicemail, ho-

wever, will still take messages. All contacts and settings are shared for both

lines.

Note: Before you can switch between phone lines, you must first establish

a second phone line with Verizon Wireless. Once it has been established, a

second phone number becomes available in the menu for selection.

ꢀ. Select Menu _ Settings _ Network _Set Phone Line.

2. Select the other line and press

Data settings

Setting Com port speed

The Com Speed sets the data rate at which your phone connects to a laptop

or PC, or at which it sends and receives over-the-air text messages.

ꢀ. Select Menu ‡ Settings ‡ Accessories ‡ Com Speed.

2. Select the speed. The options are: 19.2 kbps,115.2 kbps (default), 230.4

kbps.

Note: There may be a higher charge for making calls using high-speed data

in areas where ꢀX service is available.

Setting the phone to receive data or faxes

Your phone may be able to receive certain data or faxes, depending on the

system sending the information. To receive data or faxes, you must connect

the phone to a laptop or PC and switch the phone from voice mode to

data/fax mode.

ꢀ. Connect the phone to the laptop or PC.

2. Set the Com Speed.

3. Select Menu ‡ Settings ‡ Network ‡ Data/Fax Calls.

4. Press

to select an option:

- Voice only - Allow only voice calls.

- Fax, next callor Data, next call - Set the phone to fax mode or data

mode for the next incoming call or the next ꢀ0 minutes.

- Fax, until offor Data, until off - Force the phone into fax mode or data

mode until the phone is turned off.

Note: You cannot receive voice calls while the phone is in data/fax mode.

Connecting to a TTY/TDD device

You can connect the phone to a TTY device for the hearing impaired.

Note: Enable TTY only when using the phone with a TTY device.

ꢀ. Connect the TTY device to the phone.

2. Enter

3. Press

from your keypad.

to select the TTY option.

Setting position location

This setting allows you to share your location information with network ser-

vices other than emergency services (9ꢀꢀ, ꢀꢀꢀ, 000, etc.), in markets where

service has been implemented.

Note: This feature works only when your phone is in digital mode. You do not

have the option of turning off the locator to emergency services.

5ꢀ

ꢀ. Select Menu ‡ Settings ‡ Network ‡ Location.

2. If you see a message prompt, press

to continue.

3. Select 911 Only or Location On.

- 911 Only(default) shares your position information only with emergency

services when you call your 3-digit emergency code (9ꢀꢀ, 000, ꢀꢀꢀ, 999,

etc.).

- Location Onshares your position information with the service provider-

network, in addition to emergency services.

For information on emergency calls, see „Calling emergency services“ on

page 22.

17. USING VOICE RECOGNITION

Voice recognition allows you to make and answer calls by speaking com-

mands into the phone‘s microphone.

Note: You cannot use voice recognition to end a call; you must press

Setting up voice dialing

To make or receive calls using voice recognition (voice dialing), contacts

must be saved and have associated voice tags.

Creating a voice tag for a contact

ꢀ. Select Menu ‡ Contacts‡ Add Voice Dial.

2. Follow the voice prompts to record a name for the contact.

3. Highlight an option:

- Add new - Save a new contact to go with the voice tag.

- Add to existing - Add the voice tag to a saved contact.

Viewing entries with voice tags

• Select Menu ‡ Contacts ‡ Voice Dial List.

A list of all contacts with assigned voice tags appears.

Editing a voice tag

ꢀ. Select Menu ‡ Contacts ‡ Voice Dial List.

2. Highlight the contact you want to edit, and press

3. Highlight the phone number and press

to select it.

4. Select Add Voice Dial, Edit Voice Dial, or Erase Voice Dial.

5. Follow the prompts.

Using voice tags to place calls

ꢀ. If you haven‘t already done so, record a voicetag for the person you wish

to call.

2. From the home screen, press

. The phone responds: „Say a name.“

3. Say the name of the person you want to call.

4. If the name you said matches a contact in the Voice Dial List, the phone

responds: „Calling (Name).“ Remain silent to make the call, or say „No“

to cancel. Note: If the phone finds multiple voice tags that sound like the

name you said, you will be asked to verify which name you want to call.

Say „Yes“ when you hear the correct name. Say „No“ when you hear an

incorrect name.

5. When you are finished, press

command.

. You cannot end the call with a voice

Using voice features with hands-free car kits

You can use voice commands to make a phone call or to answer the phone

only if your phone is connected to a professionally installed hands-free car

kit (sold separately).

Note: The following features apply only to professionally installed hands-free

car kits unless noted.

Waking up the phone

If your phone is connected to a professionally installed hands-free car kit,

you can use a voice command to activate the phone to make a phone call.

Note: Voice Wake-up does not work with Keyguard active.

To activate the Voice Wake-up setting:

ꢀ. Select Menu ‡ Settings ‡ Voice Services ‡

Voice Wake-Up ‡ With ext. pwr.

2. Select = Menu ‡ Settings ‡ Keyguard ‡ Disabled, then press

To wake up the phone:

ꢀ. Say „Wake Up“ and listen for a tone.

2. Say „Wake Up“ again until you hear two tones.

If the phone does not recognize your „Wake up“ command, see „Training

voice recognition“ on page 54.

Answering the phone

You can set the hands-free car kit to either (ꢀ)answer automatically or (2)

ring until you answer using a voice command.

Answering automatically

To set your phone to answer automatically:

Note: This setting also works with the portable hands-free car kit.

• Select Menu ‡ Settings ‡ Accessories ‡ Auto-Answer

‡ After 5 secs.

Answering using voice commands

If Auto-Answer is turned off, you can use a voice command to answer an

incoming call using the hands-free car kit.

To turn off Auto-Answer:

• Select Menu ‡ Settings ‡ Accessories ‡ Auto-Answer ‡ Disabled.

To activate the Voice Answer setting:

ꢀ. Select Menu ‡ Settings ‡ Voice Services ‡ Voice Answer.

2. Highlight Enabled, then press

3. Select Menu _ Settings _ Silent Mode _Norm. Sounds.

To answer a call:

When you receive an incoming call, the phone responds: „Incoming call,

answer?“ or „Incoming roam call, answer?“ If the caller is recognized as a

saved contact entry, then the phone will say „Incoming call from (Name),

answer?“• Say „Yes“ or press any key except

Ignoring an incoming call

To ignore an incoming call, do one of the following:

• Say „No“ and press

to silence the alert.

• Remain silent. The voice alert repeats twice and the phone rings once, then

returns to the home screen.

Training voice recognition

If your phone is having trouble recognizing your voice, you can train it with

the commands „Yes,“„No,“ and „Wake up.“

ꢀ. Select Menu _ Settings _Voice Services.

2. Select Voice Training.

3. Read the message and press

4. Select Train All.

5. Follow the prompts for each word until training is complete.

18. USING TOOLS

Scheduler

The Scheduler allows you to schedule events and set reminder alerts.

Note: You cannot access Scheduler if your phone does not have a signal.

Adding an event

ꢀ. Select Menu ‡ Tools ‡ Scheduler.

- For a day in this month, select View Day. Press

left and right to scroll

through days.

- For a day in a different month, select View Month. Press

to scroll through months, and right or left to scroll through days.

2. Press to add an event to a selected date.

up or down

3. Enter a name for the event and press

For help entering text, see page 29.

4. Set the event Start time, Duration, and Alarm and press

- Press

up or down to select hour, minutes, and timing of alarm.

left or right to move between fields.

5. Add a note to the event and press

or press

twice to finish.

Viewing, editing, or erasing an event

ꢀ. Select Menu _ Tools _ Scheduler.

2. Select View Day or View Month to find the event you want to view, edit,

or erase.

3. Press

to select it.

4. Press right and press

Follow the prompts.

5. Press to return to the home screen or to return to

scheduler options.

up, down, left, or right to highlight an event and press

to select Edit, Erase, or New.

Alarm Clock

Use the Alarm Clock to set an alert for a specific time. The alert occurs only

if the phone is on.

ꢀ. Select Menu ‡ Tools ‡ Alarm Clock ‡ Set.

- Press

up or down to select an hour and minutes.

- Press

left or right to switch between hours, minutes, and a.m./p.m.

- Use the phone keypad to enter numbers.

2. Press

to select Done and save the setting.

3. When the alarm rings, select Off to turn off the alarm or Snooze to silence

the alarm for ꢀ0 minutes.

Tip Calculator

The Tip Calculator helps you calculate how much tip to include on a bill.

ꢀ. Select Menu ‡ Tools ‡ Tip Calculator.

2. Enter the amount of your bill and press

3. Select the amount you want to include as a tip (ꢀ0%, ꢀ5%, ꢀ8%, 20%,

Other) and press . Your total bill appears, including tip.

4. If you want to split the bill, press right and press to select Split.

5. Press to clear the default of 2 guests.

6. Enter the number of guests and press

calculated.

.The amount each guest pays is

Calculator

Use the calculator for basic mathematical equations.

ꢀ. Select Menu _ Tools _ Calculator.

2. Use the keypad to enter numbers.

3. Press

to select mathematical operations.

equal

divide

+ add

x multiply

. decimal point

- subtract

Clear all numbers entered and display a zero.

MR Display the value currently stored in memory.

M+ Add the displayed digit to the value stored in memory.

MC Clear the value currently stored in memory.

Change the sign of the displayed number.

Clear one function or one digit from the screen. Hold down to clear all

of the digits and operations and display a zero.

Exit the calculator and return to home screen.

Timer

This timer counts down for a specified amount oftime. It beeps when that

amount of time has elapsed.

ꢀ. Select Menu ‡ Tools ‡ Timer.

2. Press

3. Press

to Set.

up or down to set the hours, minutes, and seconds. To move the

cursor, press

left or right.

4. Select Start to begin the countdown. Select Stop to pause the countdown.

5. When the alarm rings, press

to silence it.

Stopwatch

ꢀ. Select Menu ‡ Tools ‡ Stopwatch.

2. Select Start to have the stopwatch begin counting.

3. Select Stop to stop counting.

4. Select Reset to set the counter back to zero and begin counting again.

Press

when finished.

19. MEDIA GALLERY

My Sounds

Your phone contains preset sounds, which you can add to outgoing text

messages. To access stored sounds:

ꢀ. Select Menu _ Media Gallery _ My Sounds.

2. Press

3. Highlight an option and press

up or down to scroll through the sounds.

to select it:

- Play allows you to listen to the sound.

- Send opens a new message entry screen.

- Assign allows you to use the sound as aringer on your phone.

- Delete erases the sound from your My Sounds list.

My Pictures

The My Pictures menu stores 25 graphics you have created using the

Doodler(tm) or received via text messaging. It also includes predefined

graphics for your use.

All downloaded graphics are also stored in the Screen Saver menu.

To view, edit, or erase graphics:

ꢀ. Select Menu ‡ Media Gallery ‡ My Pictures.

2. Press

3. Highlight an option and press

up or down to scroll through the graphics.

to select it:

- Send opens a new message entry screen.

- Assign sets your graphic as wallpaper or as a screen saver.

- Edit takes you to the Doodler, where you can modify the graphic.

You cannot edit graphics that came with the phone.

- Delete erases the graphic from memory. The graphic is also erased from

the Screen Saver menu. You cannot delete graphics that came with the

phone.

- Exit returns you to the home screen.

Saving memory

It is a good idea to erase old sounds and pictures, as they take up memory

in your phone. To erase a sound or picture, select it and then select Delete.

Doodler

You can create and save graphics on your phone.

ꢀ. Select Menu ‡ Media Gallery ‡ Doodler.

2. Wait 5 seconds for the intro screen to disappear, or press

to clear it.

3. Select New Doodle to open the drawing screen.

4. Use keys ꢀ-9 to move the cursor

around the screen as indicated.

Note: Press

to bring the cursor back

to center.

For more drawing tips, refer to the

following sections.

Select a drawing color

ꢀ. Press

Press

left or right to highlight Color at the bottom of the screen.

2. Highlight a color from the palette and press

Move cursor away from drawing

ꢀ. Press

up or down to select

.(Shortcut: Press

2. Press a number key to move the cursor.

Note: To start drawing again, select a drawingshade or color.

Clear screen

• Press

Erase part of drawing

ꢀ. Press up or down to select

2. Press a number key to move the eraser.

Add a shape

ꢀ. Press

left or right to select Add Shape.

2. Press

3. Select a shape and press

4. To modify the shape, press

right or left to highlight an option and press

. Options are Size, Rotate, and Move.

(To move the shape, use keys ꢀ-9.)

5. Select Done.

Saving the doodle

It is a good idea to save the doodle while you are working on it. If you receive

a call while creating an unsaved doodle, it will be lost.

• Highlight Save and press

folder. (See page 57.)

. The image will be saved in the My Pictures

Note: If you make changes to an existing doodle, you must save it with a

different name.

Resuming a doodle

• To return to the last saved doodle you were working on, select Menu ‡

Media Gallery ‡ Doodler ‡ Resume Doodle.

• To return to another saved doodle, select Menu ‡ Media Gallery ‡

Doodler ‡ My Pictures.

20. GET IT NOW

About Get It Now^®

Your phone from ecom has the ability to download and manage applications

through Get It Now.

Get It Now brings you the full range of applications and services you have

come to expect from the Internet, including games, ringtones, and much

more.

How does Get It Now work?

You connect to the server, download applications, and then manage them

as you like. When you choose an application, you may choose a demo (not

available for all applications), various limited use options, or the full version

-all varying in price. If you choose a demo, Get It Now lets you know when

it has expired. If you choose a priced version, the amount is added to your

phone bill. Get It Now also lets you know if you‘re running out of memory.

At that point, you can either disable an application or remove it completely.

Once applications are loaded, you can update to newer versions as they

become available.

Downloading an application

ꢀ. Press and hold right.

2. Select the Get it Now shopping cart icon.

3. Select a category. A full list of applications of the type you selected ap-

pears. New apps are indicated by an arrow on the left.

Note: Long titles scroll left as you highlight them.

4. Select an application. A list of usages appears.There may be one or more

usages available. The costs are specified for each.

5. Select a usage. You are then prompted by a message asking you to

confirm your choice.

6. Select Yes to confirm. The application is downloaded to your phone.

Note: Download times vary.

7. To open the application now, select Yes. If you choose No, you return to

the Get It Now menu, where you see a link to your new application.

Opening an application

Downloaded applications are stored under the Get It Now menu. Each appli-

cation comes with its own unique icon, to help you identify it easily.

ꢀ. Press and hold

right.

Note: The Get It Now icon always remains at the beginning of this menu.

Downloaded applications are listed after.

2. Highlight and select the icon for the application you want to open.

Viewing application details

You can get information about the size of an application and how many uses

it has left before it runs out.

ꢀ. Press and hold

right.

2. Select Settings ‡ Manage Apps.

3. Select the application you want details for.

Removing an application

Important: If you remove an application, it is removed completely from your

phone. If you want to use it again, you must pay for it again. If you want to

free up space on your phone, we recommend you disable the application

(see next section).

ꢀ. Press and hold

right.

2. Select Settings ‡ Manage Apps.

3. Press

4. Press

down to locate the application.

5. Select Remove.

6. Select Yes to confirm your choice.

Disabling an application

If you are running out of memory and would liketo download more applica-

tions, but do not want to completely remove those you have paid for, you can

simply disable them. This means you have to re-download an application in

order to use it again, but don‘t have to pay for it again.

ꢀ. Press

and hold right.

2. Select Settings ‡ Manage Apps.

3. Select the application and then select Lock App.

4. Select Yes to confirm your choice.

Note: The app is still listed in the Get It Now menu.

Checking available memory

The amount of available memory depends on the number of applications you

downloaded.

ꢀ. Press

and hold right.

2. Select Settings ‡ Manage Apps. The System Info menu displays the

amount of memory left at the bottom of the screen. More detailed memory

information can be obtained by pressing

to open System Info.

21. CONNECTING TO THE INTERNET

Using Mobile Web

You can use your phone to browse the Internet if you have obtained phone

Internet services from Verizon Wireless and if over-the-air Internet access is

available in your area.

Note: You cannot receive incoming calls while you are using Mobile Web.

Starting Mobile Web

ꢀ. Press and hold

left.

If this is the first time you have connected to the Internet, a message

informs you that security is not yet enabled for your Mobile Web.

2. Press

to select Yes to enable security.

When you are connected, a browser home page appears. It has a list of

bookmarks and some Web menu options at the bottom of the screen.

- A

- An underline and an arrow indicate that there is more text. Press

down to view more text. Press to return to the previous screen.

appears in a secure session.

3. When you have finished using the Internet, press

to exit the browser.

Using the Web menu options

The following options may appear on your screen:

• Home returns you to the main Mobile Webwindow, or home page.

6ꢀ

• Mark Site saves the current location as a bookmark for easy access.

• Setup gives you options for changing how information is displayed.

- Show URL displays the entire URL.

- About Openwave displays information about your Mobile Web version.

- Encryption should not be used unless you are instructed to do so by

Verizon Wireless.

- UP.Link selects a different browser server. You can use this option if you

have morethan one Mobile Web account.

- Restart restarts Mobile Web.

Checking Net alerts

Alerts received from a Web site are sent to your Net Alerts inbox.

ꢀ. Press

2. Select Net Alerts. This action launches the browser inbox.

3. Press to accept browser fees.

down to open the Messages menu.

4. Select an alert and follow the prompts.

22. GETTING HELP

Customer Support

The Verizon Wireless customer support department is accessible directly

from your phone when you dial *6ꢀꢀ. They can answer questions about your

phone, phone bill, call coverage area, and specific features available to you,

such as call forwarding or voicemail.

For questions about the phone features, refer to the materials provided with

your phone, or visit www.kyocera-wireless.com.

For additional questions, you may contact the Kyocera Wireless Corp. Custo-

mer Care Center inany of the following ways:

• Web site: www.kyocera-wireless.com

• Email: [email protected]

Before requesting support, please try to reproduce and isolate the problem.

When you contact the Customer Care Center, be ready to provide the follow-

ing information:

• The name of your service provider: Verizon Wireless.

• The actual error message or problem you are experiencing.

• The steps you took to reproduce the problem.

• The phone‘s electronic serial number (ESN). To find the ESN select Menu

‡ Phone Info.

Qualified service

If the problem with your phone persists, returnthe phone with all accessories

and packaging to the dealer for qualified service.

Communication

Torches/Flashlights

Mobile Computing

Measuring & Calibration

The contents of this document, either in part or in their entirety, may not be reproduced, forwarded, distributed or saved in any

way without ecom instruments GmbH prior written consent.

The contents of this document are presented as they currently exist. ecom instruments GmbH does not provide any express

or tacit guarantee for the correctness or completeness of the contents of this document, including, but not restricted to, the

tacit guarantee of market suitability or fitness for a specific purpose unless applicable laws or court decisions make liability

mandatory. ecom instruments GmbH reserves the right to make changes to this document or to withdraw it any time without

prior notice.

PA000317 / 1200 / 05 / 08

WEEE-Reg.-Nr. DE 934 99306

0165AL01A00 05/08 Subject to change without notice!

ecom instruments GmbH · Industriestr. 2 · 97959 Assamstadt · Germany

Tel.: + 49 (0) 62 94 / 42 24 0 · Fax: + 49 (0) 62 94 / 42 24 100

E-Mail: [email protected] · www.ecom-ex.com

Mr Coffee TR10 User Manual
Motorola V291 User Manual
Motorola BALI User Manual
Kenwood CD Player KDC MP146 User Manual
Imation S Class User Manual
IBM DB2 User Manual
Fujitsu MHS2040AT User Manual
FieldServer Gamewell FCI E3 Series User Manual
Cypress EZ USB HX2LP User Manual
Cecilware BT3 User Manual