De’Longhi Appliances
via Seitz, 47
31100 Treviso Italia
5713215721/03.11
Description of accessories
Crema
filter 1 coffee
Crema filter
2 coffee
Power supply
cable (removable)
Measuring spoon /
tamper"
Filter-holder
cup
Crema filter
ESE pods
Reactive strip to detect
water hardness (Total
hardness test)
Water softener filter (*not included,
may be purchased in authorised
assistance centres)
Descaler
Contents
Description of accessories..................................................... 2
Description of the appliance and control panel ...................... 3
Operating lights .................................................................. 4
Total hardness test .............................................................. 5
First use ............................................................................. 6
Espresso.............................................................................. 8
Cappuccino.......................................................................... 9
cappuccino.......................................................................................................... 9
Hot water...........................................................................10
Temperature optimisation ..................................................10
Energy Saving.....................................................................11
Cleaning ........................................................................12
Descaling and Rinse ............................................................13
Tips....................................................................................14
Troubleshooting .................................................................15
Safety................................................................................17
Symbols used in these instructions ................................................................... 17
Fundamental recommendations regarding safety............................................. 17
Conditions of use............................................................................................... 17
Instructions for use ........................................................................................... 17
Techcnical data - Disposal ....................................................18
Check after transport ........................................................................................ 18
Technical date ................................................................................................... 18
Disposal ............................................................................................................ 18
Electrical connection (UK ONLY) ........................................................................ 18
2
Description of the appliance and control panel
General switch
Cup shelf
ON/OFF
Power supply
cable
connector
Control panel (see
description below)
Boiler outlet/
Infusion assembly
Steam/
hot water
selector
Water tank seat
Water tank lid
Hot water/
steam nozzle
Cappuccino
nozzle
Cup tray
Drip tray
Indicator for
drip tray
maximum
water level
Water tank with
water filter seat
Water low
level indicator
OK steam light
Stand-by/energy save light
ON/Stand-by Button
Control Panel
OK coffee/
hot water light
Coffee delivery
“STOP”/hot water function position
Steam function
Function selector
3
Operating lights
Lights
Function
selector (B8)
Selector (A4)
Meaning of lights
Every time the device is turned on, a self-test is
automatically activated by pressing the general
switch into I position. The three lights will flash in
succession for a few seconds, until the self-test is
complete
The device is heating up to distribute coffee or hot
water. The coffee / hot water light will flash while
the device is heating up in order to dispense coffee
or hot water
The device has reached the ideal temperature to
deliver coffee or hot water.
COFFEE: turn the B8 selector to
HOT WATER: turn the A4 selector to
.
.
B8 selector is on : the relative light flashes to
indicate that the device is heating up to deliver
steam.
The device has reached the ideal temperature to
deliver steam.
Turn the A4 selector to
to begin.
Following steam delivery, the temperature is
too high to make coffee: see “TEMPERATURE
OPTIMISATION”on page 12 to make coffee at the
correct temperature. If instead one wishes to make
a cappuccino or hot water, proceed as usual.
If “LOW POWER”(energy saving) is active and
the device is not used for 15 minutes, “LOW
POWER”automatically activates, reducing energy
consumption in compliance with current European
regulations. Simply turn one selector to return
to normal use. To activate or deactivate the “Low
Power”, please refer to page 11.
If the device is not used for 75 minutes, it will auto-
matically switch off (stand-by): to switch it back on,
press the
button.
4
Total hardness test
1 min
T
O
T
A
L
H
A
R
D
N
E
S
T
E
S
T
1 s
S
1
2
3
TOTAL HARDNESS TEST
MONTHS
NUMBER OF WATER TANKS (L)
0
1
x
x
x
x
x
240 L
180 L
120 L
70 L
2
3
4
40 L
To determine descaling frequency, refer to the table (months of use or number of used tanks).
5
First use
4
7
5
8
6
1
2
9
O = OF
I = ON
O
N
/
O
F
F
10
11
14
12
13A
13B
15
13C
6
First use
17
18
16
(fig. 4-6)
19
7
Espresso
1Espresso
C4
C2
2 Espressos
C3
(fig. 8-9)
20 21
22
23
24
See advice in “Tips”par. on page 14.
Espresso Ready!
8
Cappuccino
5°C
Ma ek an eps er s
(page 8)
o
max 1/3
25
60s Max.
26
29
27
28
Cappuccino Ready!
Cel anin
g
(page 12)
Temperature
optimisation
(page 10)
30
After every cappuccino, clean the cappuccino maker.
9
Hot water
31
34
32
60s Max.
33
Temperature optimisation
Espresso?
(fig. 20-21)
(fig. 8-9)
35
36
39
37
38
10
Energy Saving
S
T
A
N
D
-
75min.
B
Y
To enable or desable the low power function
Lwoewop
r
On
Low power
Off
When LOW power is enabled, the device will automatically activate LOW POWER after 15 minutes and subsequently go into standby mode.
Espresso?
L
Page 8
O
W
P
Cappuccino?
aW ter?
15 min.
Page 9
O
W
E
R
Page10
S
T
A
N
D
-
60 min.
B
Y
11
Cleaning
40
43
46
41
44
47
CAUTION
HOT!
42
OFF
45
(fig. 7-9)
x200
12
Descaling and Rinse
1l
Total hardness test
(page 7)
(fig. 4)
+
IRRITANTE
-
IRRITANT
REIZEND IRRITEREND
-
(fig. 6)
Descaling
Repeat
35s
35s
x
4
5 min
Rinse
(fig. 4-6)
1L
Repeat
Rnis
e
(fig. 4-6)
13
Tips
ꢀ ꢁꢂꢃꢄꢅꢆꢇ
ꢀ
ꢀꢌꢍꢎꢏꢐꢍꢍꢑꢇ
0,5 L
Filter
*
ꢁ
14
Troubleshooting
Problem
Possible causes
Solution
The device will not switch on
The power supply cable is not inserted
correctly
Check that the power supply cable
connector is fully inserted in the
appropriate seat on the back of the
device; then, check that the plug is
correctly connected to the power outlet
The device is switched on, but it does not The selectors are not in the correct
Turn the selectors into the correct
proceed with the desired function:
lights are flashing
position (attention: upon activation, the position
selectors must both be on
)
Espresso coffee does not flow out
No water in the tank
Fill the water tank
The holes in the filter-holder are blocked Clean the holes in the filter-holder spouts
The espresso boiler outlet is blocked
Clean as indicated in the “Cleaning”
paragraph
Espresso coffee drips from the edges of The filter-holder is not correctly inserted Attach the filter-holder correctly and turn
the filter-holder instead of through the or is dirty
holes
it fully to the right
The espresso boiler gasket has lost
Try cleaning the gasket first using a
damp cloth. To replace the espresso
boiler gasket, contact Customer Services
elasticity or it is dirty
The holes in the filter-holder spout are
blocked
Clean the holes in the spouts.
The filter-holder does not hook onto the Too much coffee was poured in the filter Use the supplied measure and make sure
device
to use the correct filter for the type of
preparation desired (see table on page 10)
Loud pump noise
The water tank is empty
Fill the water tank
The tank is inserted incorrectly and the
valve on the bottom is not open
Press the tank lightly to open the valve
on the bottom
The coffee cream is light (coffee flows The ground coffee has not been
Tamper the ground coffee more
quickly from the spout)
sufficiently pressed
Not enough ground coffee
Increase the amount of ground coffee
The coffee is not ground finely enough
Only use coffee ground specifically for
espresso coffee machines
Incorrect type of ground coffee
Change the quality of the ground coffee
After coffee, the filter is attached to the
boiler outlet
Attach the filter holder to the boiler
outlet (fig. 7-8-9), then remove it.
After making coffee, the pod or cofee
powder is attached to the boiler outlet
Attach the filter holder to the boiler
outlet (fig. 7-8-9), deliver a coffee (fig.
23-24), then remove the filter holder.
15
Troubleshooting
Problem
Possible causes
Solution
The coffee crema is dark (the coffee flows The ground coffee is too tightly pressed
Decrease the amount of ground coffee
Reduce the quantity of ground coffee
Clean as indicated in “Cleaning the filter”
slowly from the spout)
Too much ground coffee
The espresso boiler outlet is blocked
The filter is blocked
Only use coffee ground specifically for
espresso coffee machines and it must not
be damp. Clean filter
The coffee is too finely ground
Change the quality of the ground coffee
powder
The ground coffee is too fine or is damp
Only use coffee ground specifically for
espresso coffee machines and it must not
be damp
Incorrect type of ground coffee
Change the quality of the ground coffee
powder
The milk does not froth when making a Milk not cold enough
cappuccino
Always use milk at refrigerator
temperature
Cappuccino nozzle is dirty
Carefully clean the holes in the
cappuccino nozzle
16
Safety
Symbols used in these instructions
The important recommendations have these symbols. These
recommendations must be followed.
Attention:
The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Danger!
Failure to comply can be or is the cause of injury due to life-
threatening electric shocks.
Attention!
Scalding hazard!
This appliance produces hot water and steam may form when
it is operating.
Pay attention not to come into contact with hot water sprays
or steam.
Failure to comply can be or is the cause of injury or damage to
the appliance.
Scalding hazard!
Failure to comply can be or is the cause of scalding or burns.
Do not touch the cup warmer plate when the appliance is on;
it is hot.
Please Note:
This symbol highlights recommendations and important
information for the user.
Conditions of use
This appliance is manufactured for the preparation of coffee
and to heat beverages.
Fundamental recommendations regarding safety
The appliance is designed and produced for domestic use only.
It is not suitable for use in:
Danger!
As the appliance operates using electric current, electric shocks
tꢀ TUBòꢀLJUDIFOTꢀJOꢀTIPQTꢂꢀPóDFTꢀBOEꢀPUIFSꢀXPSLQMBDFT
tꢀ GBSNT
tꢀ IPUFMTꢂꢀNPUFMTꢀPSꢀPUIFSꢀIPMJEBZꢀBDDPNNPEBUJPO
tꢀ HVFTUꢀIPVTFT
can not be excluded.
Therefore, follow the safety recommendations given:
tꢀ %PꢀOPUꢀUPVDIꢀUIFꢀBQQMJBODFꢀXIFOꢀZPVꢀIBWFꢀXFUꢀIBOETꢀPSꢀ
feet.
Any other use must be considered improper and therefore
dangerous.
The manufacturer is not liable for damage deriving from the
tꢀꢀ %PꢀOPUꢀUPVDIꢀUIFꢀQMVHꢀXJUIꢀXFUꢀIBOETꢁ
tꢀꢀ .BLFꢀ TVSFꢀ UIBUꢀ UIFꢀ TPDLFUꢀ VTFEꢀ DBOꢀ BMXBZTꢀ CFꢀ FBTJMZꢀ
reached, so that the plug can be removed when required.
tꢀꢀ 3FNPWFꢀUIFꢀQMVHꢀGSPNꢀUIFꢀTPDLFUꢀCZꢀBDUJOHꢀEJSFDUMZꢀPOꢀ
the plug itself. Do not pull the cable as damage could be
caused.
tꢀꢀ 3FNPWFꢀ UIFꢀ QMVHꢀ GSPNꢀ UIFꢀ TPDLFUꢀ UPꢀ EJTDPOOFDUꢀ UIFꢀ
appliance completely.
tꢀꢀ %Pꢀ OPUꢀ BUUFNQUꢀ UPꢀ SFQBJSꢀ UIFꢀ BQQMJBODFꢀ JGꢀ JUꢀ TIPVMEꢀ
breakdown.
improper use of the appliance.
Instructions for use
Thank you for choosing this coffee machine. To get the very
best out of your new coffee machine it is advisable to read the-
se instructions before using the appliance. This is the only way
to ensure optimum results and maximum safety.
The manufacturer is not liable for damage deriving from the
failure to comply with the user instructions.
Switch the appliance off, remove the plug from the
socket and contact the After-Sales Service. Please refer to
enclosed guarantee leaflet for details.
Please Note:
tꢀꢀ *GꢀUIFꢀQMVHꢀPSꢀQPXFSꢀTVQQMZꢀDBCMFꢀBSFꢀEBNBHFEꢂꢀIBWFꢀUIFNꢀ
replaced exclusively by the De’Longhi After-Sales Service,
in order to prevent risks. Please refer to the enclosed
guarantee leaflet for details.
Keep these instructions carefully. If the appliance should be
transferred to other persons, these instructions must accom-
pany it.
Please Note: first use
Attention:
Upon first use, rinse the internal ducts of the device, and ope-
rate the device like one would to make coffee until at least one
water tank has been emptied; then, proceed to making coffee.
Keep the packaging material (plastic bags, expanded
polystyrene) out of the reach of children.
17
Techcnical data - Disposal
Check after transport
Electrical connection (UK ONLY)
Before using this appliance ensure that the voltage indicated on the
product corresponds with the main voltage in your home, if you are
in any doubt about your supply contact your local electricity company.
The flexible mains lead is supplied connected to a B.S. 1363 fused plug
having a fuse of 13 amp capacity. Should this plug not fit the socket
outlets in your home, it should be cut off and replaced with a suitable
plug, following the procedure outlined below.
After the packaging has been removed, check the integrity of
the appliance and the presence of all accessories.
Do not use the appliance in the presence of obvious damage.
Contact the De’Longhi Customer Services department, please
see enclosed leaflet.
Technical date
Note: Such a plug cannot be used for any other appliance and should
therefore be properly disposed of and not left where children might
find it and plug it into a supply socket - with the obvious consequent
danger.
Please note: We recommend the use of good quality plugs and wall
sockets that can be switched off when the machine is not in use.
IMPORTANT: The wires in the mains lead fitted to this appliance are
coloured in accordance with the following code:
Mains voltage:
Absorbed power:
Dimensions (LxHxD ):
Thermoblock:
Pressure:
Water tank capacity:
Cable length:
Weight:
220-240V 50/60Hz
1450W
305x275x320 mm
˜
stainless steel/aluminum
15 bar
1 L
1,2 m
5,35 kg
Green and Yellow to Earth
GREEN AND YELLOW EARTH
13 amp Fuse
BLUE
BROWN
NEUTRAL
LIVE
The appliance complies with the following EC
directives:
Brown to live
Cord Clamp
Blue to
neutral
tꢀ 4UBOEꢃCZꢀ%JSFDUJWFꢀOPꢁꢀꢄꢅꢆꢇꢈꢅꢉꢉꢊꢋ
tꢀꢀ -PXꢀ 7PMUBHFꢀ %JSFDUJWFꢀ ꢅꢉꢉꢌꢈꢍꢇꢈ&$ꢀ BOEꢀ TVCTFRVFOUꢀ
amendments;
tꢀꢀ &.$ꢀ %JSFDUJWFꢀ ꢅꢉꢉꢎꢈꢄꢉꢊꢈ&$ꢀ BOEꢀ TVCTFRVFOUꢀ
amendments
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
-
The wire which is coloured green and yellow must be connected
to the terminal in the plug which is marked with the letter E or by
the earth symbol
or coloured green or green and yellow.
tꢀꢀ .BUFSJBMTꢀBOEꢀBDDFTTPSJFTꢀDPNJOHꢀJOUPꢀDPOUBDUꢀXJUIꢀGPPEꢀ
conform to EEC regulation 1935/2004.
-
-
The wire which is coloured blue must be connected to the termi-
nal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the ter-
minal which is marked with the letter L or coloured red.
Disposal
Recommendations for the correct disposal of the
product in compliance with the 2002/96/CE
European Directive.
When wiring the plug, ensure that all strands of wire are securely retai-
ned in each terminal. Do not forget to tighten the mains lead clamp on
the plug. If your electricity supply point has only two pin socket outlets,
or if you are in doubt, consult a qualified electrician. Should the mains
lead ever require replacement, it is essential that this operation be car-
ried out by a qualified electrician and should only be replaced with a
flexible cord of the same size. After replacement of a fuse in the plug,
the fuse cover must be refitted. If the fuse cover is lost, the plug must
not be used until a replacement cover is obtained. The colour of the
correct replacement fuse cover is that of the coloured insert in the base
of the fuse recess or elsewhere on the plug. Always state this colour
when ordering a replacement fuse cover. Only 13amp replacement
fuses which are asta approved to B.S. 1362 should be fitted.
This appliance conforms to the Norms EN 55014 regarding the suppres-
sion of radio interference.
The product must not be disposed of as urban waste at the end
of its working life.
It must be taken to appropriate local authority separate waste
collection centres or to dealers providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deri-
ving from unsuitable disposal and allows to recover the mate-
rials of which it is made in order to make significant savings in
energy and resources.
The product has the crossed-out wheeled bin mark as a re-
minder of the obligation to dispose of household appliances
separately.
Warning - this appliance must be earthed
18
|