1321013IDL/07.08
1
2
3
4
5
6
ELECTRICAL CONNECTION (UK ONLY)
A) If your appliance comes fitted with a plug, it will incorporate a 13
Amp fuse. If it does not fit your socket, the plug should be cut off from
the mains lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after removing
the fuse: do not insert in a 13 Amp socket elsewhere in the house
as this could cause a shock hazard.
If the plug is a moulded-on type, the fuse cover must be re-fitted
when changing the fuse using a 13 Amp Asta approved fuse to BS
1362. In the event of losing the fuse cover, the plug must NOT be
used until a replacement fuse cover can be obtained from your nea-
rest electrical dealer. The colour of the correct replacement fuse cover
is that as marked on the base of the plug.
With alternative plugs not incorporating a fuse, the circuit must be
protected by a 15 Amp fuse.
B) If your appliance is not fitted with a plug, please follow the instruc-
tions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
As the colours of the wires in the mains lead may not correspond with
the coloured markings identifying the terminals in your plug, proceed as
follows:
IMPORTANT
The wires in the mains lead are coloured in accordance with the fol-
lowing code:
The green and yellow wire must be connected to the terminal in the plug
Green and yellow:
Blue:
Brown:
Earth
Neutral
Live
marked with the letter E or the earth symbol
green and yellow.
The blue wire must be connected to the terminal marked with the letter N
or coloured black.
or coloured green or
The brown wire must be connected to the terminal marked with the letter
L or coloured red.
B
A
D
C
E
F
D
H
G
I
|