Clarion VRX653R User Manual

Owner’s manual & Installation manual  
Mode d’emploi et manuel d’installation  
Bedienungs- & Installationsanleitung  
Manuale d’Istruzioni e d’Installazione  
Gebruiksaanwijzing en installatie-aanwijzingen  
Manual de instrucciones y de instalación  
Bruksanvisning- och installations  
Manual do proprietário e manual de instalação  
VRX653R  
6.5” MONITOR & RDS-EON FM/MW/LW RADIO WITH CD/  
DVD CHANGER CONTROL  
MONITEUR DE 6,5 POUCES ET RADIO FM/PO/GO RDS-  
EON AVEC COMMANDE DE CHANGEUR  
DE CD/DVD  
6,5-ZOLL-MONITOR & RDS-EON UKW/MW/LW-RADIO  
MIT CD/DVD-WECHSLERSTEUERUNG  
MONITOR DA 6,5” E RADIO FM/MW/LW CON COMANDO  
CAMBIA CD/DVD  
6,5” MONITOR EN RDS-EON FM/MW/LW RADIO MET  
AANSTURING VOOR CD/DVD-WISSELAAR  
MONITOR DE 6,5-PULGADAS Y RADIO FM/MW/LW RDS-  
EON CON MANDO PARA EL CAMBIADOR DE  
CD/DVD  
6,5-TUMS BILDSKÄRM MED RDS-EON FM/MV/LV-  
RADIO OCH CD/DVD-VÄXLARSTYRNING  
MONITOR DE 6,5 POLEGADAS E AUTO-RÁDIO RDS-EON  
FM/MW/LW COM CONTROLO DO PERMUTADOR DE CD/  
DVD  
Thank you for purchasing the Clarion VRX653R.  
This owners manual is for the VRX653R.  
Please read this owners manual in its entirety before operating this equipment.  
After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
Check the contents of the enclosed warranty card and keep it carefully with this manual.  
This manual includes the operating procedures of the CD changer, DVD changer, TV tuner  
connected via the CeNET cable. The CD changer, DVD changer, TV tuner have their own  
manuals, but no explanations for operating them are described.  
Contents  
1. PRECAUTIONS ....................................... 3  
7. DCP ........................................................ 14  
2. CAUTIONS ON HANDLING .................... 4  
LCD panel/Generalities ............................ 4  
Cleaning ................................................... 4  
8. OPERATIONS ........................................ 15  
Basic Operations .................................... 15  
Radio Operations ................................... 18  
RDS Operations ..................................... 20  
CD Changer Operations ........................ 23  
DVD Changer Operation ........................ 25  
TV Operations ........................................ 29  
Digital Radio/DAB Operations ............... 32  
NAVI Operations .................................... 37  
CCD Camera .......................................... 38  
Connecting other companys image  
3. CONTROLS ............................................. 5  
4. NOMENCLATURE ................................... 6  
Names of Buttons..................................... 6  
JOYSTICK Operation ............................... 7  
5. MODE DISPLAY ...................................... 8  
Display common to each mode ............... 8  
TITLE LIST mode display ........................ 8  
RADIO mode display................................ 9  
RDS mode display ................................... 9  
CD Changer mode display ..................... 10  
TV mode display .................................... 10  
DAB mode display.................................. 11  
DVD Changer mode display .................. 11  
equipment ........................................... 38  
Other Functions...................................... 39  
9. IN CASE OF DIFFICULTY ..................... 41  
10. ERROR DISPLAYS................................ 43  
11. SPECIFICATIONS ................................. 44  
6. REMOTE CONTROL ............................. 12  
Inserting the Battery ............................... 12  
Functions of Remote Control Unit  
Buttons ............................................... 13  
2
VRX653R  
1. PRECAUTIONS  
2. CAUTIONS ON HANDLING  
LCD panel/Generalities  
WARNING  
For your safety, the driver should not watch the TV or operate the controls while  
driving. Please note that watching and operating the TV while driving are prohibited by  
law in some countries. Also, while driving, keep the volume to a level at which external  
sounds can be heard.  
For a longer service life, be sure to read the following cautions.  
Be sure to store the LCD panel inside the  
main unit when parking the car outdoors  
for long period of time. The LCD panel will  
operate properly in a temperature range of  
0 to 60°C.  
Don’t allow any liquids on the set from  
drinks, umbrellas etc. Doing so may  
damage the internal circuitry.  
Do not insert objects or poke in the space  
between the LCD panel and the main unit  
when the panel is tilted.  
1. When the inside of the car is very cold and  
the player is used soon after switching on  
the heater, moisture may form on the disc  
(CD/DVD) or the optical parts of the player  
and proper playback may not be possible.  
If moisture forms on the disc (CD/DVD),  
wipe it off with a soft cloth. If moisture  
forms on the optical parts of the player, do  
not use the player for about one hour. The  
condensation will disappear naturally  
allowing normal operation.  
4. TV broadcast reception  
Do not place anything on the display when  
the panel is tilted.  
When receiving the TV broadcasts, the  
strength of the signals changes since the  
car is moving, so in some cases it may  
not be possible to receive clear pictures.  
The remote controller may not work if the  
remote control sensor is exposed to direct  
sunlight.  
• TV signals are strongly linear, so  
reception is affected by buildings,  
mountains and other obstacles.  
Do not disassemble or modify the set in any  
way. Doing so may result in damage.  
In extremely cold weather, the display  
movement may slow down and the display  
may darken, but this is not a malfunction.  
The display will work normally when the  
temperature increases.  
Do not draw the LCD panel out and use it  
as a tray. Also, subjecting the LCD panel to  
shocks may result in breakage, deformation  
or other damage.  
• Such external factors such as electric  
train lines, a high voltage lines, and  
signal devices may disturb the picture or  
cause noise.  
If the reception is poor, switch to a station  
with good reception.  
Small black and shiny spots inside the LCD  
panel are normal for LCD products.  
Do not let cigarettes burn the display. Doing  
so may damage or deform the cabinet.  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the  
sound to skip.  
The LCD panel may stop temporarily when  
it opens or closes, when the engine stops  
or when it is cold.  
If a problem should occur, have the set  
inspected at your store of purchase.  
INFORMATION FOR USERS:.  
3. This unit uses a precision mechanism.  
Even in the event that trouble arises, never  
open the case, disassemble the unit, or  
lubricate the rotating parts.  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE  
MANUFACTURER WILL VOID THE  
WARRANTY.  
Cleaning  
On navigation  
• If the NAVI mode is turned to NVG, the FNC  
button becomes invalid and the audio  
modes cannot be switched.  
Cleaning the cabinet  
Cleaning the LCD panel  
Use a soft, dry cloth and gently wipe off the  
dirt. For tough dirt, apply some neutral  
detergent diluted in water to a soft cloth, wipe  
off the dirt gently, then wipe again with a dry  
cloth.  
The LCD panel tends to collect dust, so wipe it  
off occasionally with a soft cloth. The surface  
is easily scratched, so do not rub it with hard  
objects.  
Do not use benzene, thinner, car cleaner,  
etc., as these substances may damage the  
cabinet or cause the paint to peel. Also,  
leaving rubber or plastic products in contact  
with the cabinet for long periods of time may  
cause stains.  
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.  
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.  
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.  
Glöm inte att vika ut och läsa nästa sida. / Não deixe de aprir e ler a próxima página.  
VRX653R  
3
VRX653R  
4
CONTROLS / COMMANDES / REGLER / CONTROLLI  
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS  
4. NOMENCLATURE  
3.  
Names of Buttons  
Main unit / Unité principale / Hauptgerät / Unità principale  
Note:  
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principale  
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5  
(unfold).  
With the Display closed / Avec l`afficheur fermé / Mit geschlossenem Display /  
Con display chiuso / Met het display gesloten / Con el visualisador cerrado /  
Med bildskärmen stängd / Com o écran fechado  
With the display closed  
With the display open  
3
4
5
6
7
8
¥ Color LCD display  
1 PWR (POWER) button  
FNC (Function) button  
2 SEARCH button  
& A-M (Audio-Mode) button  
* ADJ (Adjust) button  
( TITLE button  
2
1
9
0
!
VOLUME button  
) NVG (Navigation)/AV button  
¡ JOYSTICK  
a button  
d button  
%
$
#
@
Remote Control Infrared Sensor  
3 PLAY/PAUSE button  
With the Display open / Avec l`afficheur ouvert / Mit geöffnetem Display /  
Con display aperto / Met het display geopend / Con el visualisador abierto  
Med bildskärmen öppen / Com o écran aberto  
¥
4 Information Panel  
5 PS (Preset scan)/AS (Auto store) button  
SCN (Scan) button  
6 DCP RELEASE lever  
7 AF (Alternative Frequencies) button  
RPT (Repeat) button  
8 PTY (Program Type) button  
RDM (Random) button  
9 Z-EHCR (Z-enhancer) button  
0 INFO (Information) button  
TA (Traffic announcement) button  
! OPEN button  
@ DISP (Display) button  
# PRESET buttons (1 to 6)  
DIRECT buttons (1 to 6)  
$ MUTE button  
% BND (Band) button  
¡
)
(
*
&
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.  
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.  
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende  
hoofdstukken.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.  
Nota: Lembre-se de abrir esta página e consultar os diagramas frontais durante a leiture de cada capítulo.  
5
VRX653R  
6
VRX653R  
JOYSTICK Operation  
Notes:  
• Many settings/procedures have to be performed by using the JOYSTICK ¡. Be sure to read this  
chapter in order to operate it properly.  
• In the DVD changer mode, items for menu display, etc. can be selected by operating the JOYSTICK ¡  
upward, downward, leftward or rightward.  
Selecting an item in the menu  
Select an item displayed in the menu by operating  
the JOYSTICK ¡ upward or downward.  
Setting an option for the selected item  
When the setting options for an item are listed  
on the right of the display, you can choose the  
desired option by operating the JOYSTICK ¡  
leftward or rightward. Then, press the center of  
the JOYSTICK ¡ to set your choice.  
When push NEXTis displayed next to  
the menu item  
1. Press the ENT at the center of the  
JOYSTICK ¡ to select the item and show  
the setting display for this item.  
2. Operate the JOYSTICK ¡ upward or  
downward to select the desired setting  
option, then press ENT at the center of the  
JOYSTICK ¡ to set your choice.  
Returning to the previous mode  
Select the item MENUby operating the  
JOYSTICK ¡ leftward or rightward, then press  
the ENT at the center of the JOYSTICK ¡.  
VRX653R  
7
5. MODE DISPLAY  
The Color LCD Display and the Information Panel on the main unit show the following displays, provid-  
ing information about the mode and functions operated.  
Display common to each mode  
COLOR LCD DISPLAY  
INFORMATION PANEL  
MAIN  
Clock Time display  
TITLE LIST mode display  
COLOR LCD DISPLAY  
INFORMATION PANEL  
8
VRX653R  
RADIO mode display  
COLOR LCD DISPLAY  
INFORMATION PANEL  
MAIN  
SUB  
RDS mode display  
COLOR LCD DISPLAY  
INFORMATION PANEL  
VRX653R  
9
CD Changer mode display  
COLOR LCD DISPLAY  
INFORMATION PANEL  
MAIN  
SUB  
TV mode display  
COLOR LCD DISPLAY  
INFORMATION PANEL  
MAIN  
SUB  
10  
VRX653R  
DAB mode display  
COLOR LCD DISPLAY  
INFORMATION PANEL  
DVD Changer mode display  
COLOR LCD DISPLAY  
INFORMATION PANEL  
While the car is moving, the screen below is  
displayed.  
MAIN  
DVD  
AUDIO PROGRAM ONLY  
• No sub-indication  
VRX653R  
11  
6. REMOTE CONTROL  
When the panel is open  
Operating range: 30° in all directions  
Signal transmitter  
[
]
]
[
[
]
FNC  
BND  
]
[
[
], [  
[
], [  
a d  
]
]
]
[
[
]
MUTE  
DISP  
[
TA  
]
PTY  
[
]
[
]
AF  
PS/AS  
Inserting the Battery  
1 Turn over the remote control unit and slide the cover in the  
direction indicated by the arrow in the illustration.  
2 Insert the battery (CR2025) into the insertion guides, with  
the printed side (+) facing upwards.  
3 Press the battery in the direction indicated by the arrow so  
that it slides into the compartment.  
4 Replace the cover and slide in until it clicks into place.  
Notes:  
Misuse may result in rupture of the battery, producing leakage  
of fluid and resulting in personal injury or damage to  
surrounding materials. Always follow these safety precautions:  
Insertion guide  
• Use only the designated battery .  
R
• When replacing the battery, insert properly, with +/– polarities  
oriented correctly.  
• Do not subject battery to heat, or dispose of in fire or water.  
Do not attempt to disassemble the battery.  
• Dispose of used batteries properly.  
12  
VRX653R  
Functions of Remote Control Unit Buttons  
Mode  
CD changer  
Radio (RDS)  
DVD changer  
TV  
Button  
[FNC]  
Switches among Radio, DAB, CD changer, DVD changer and TV.  
[BND]  
Switches reception  
band.  
Moves to the next disc in increasing order. Switches reception band.  
[w, z]  
Increases and decreases volume (in all modes).  
[a, d]  
Moves preset chan-  
nels up and down.  
Moves tracks up and down.  
When pressed and held for 1 second:  
Fast-forward/Fast-backward.  
Moves preset channels  
up and down.  
[
]
No function.  
Switches between playback and pause.  
No function.  
Turns mute on and off.  
TA on and off.  
[MUTE]  
[TA]  
DISP  
[
]
Turns on and off the  
monitor.  
Turns on and off the monitor.  
DVD changer mode;  
Turns on and off the  
monitor.  
When pressed and held for 1 second:  
Superimpose (Playback information is  
displayed.)  
When pressed and held  
for 1 second: Superim-  
pose (Playback informa-  
When pressed and held with Superimpose tion is displayed.)  
on: Switches the screen sizes.  
When pressed and held  
with Superimpose on:  
Switches the screen  
sizes.  
[PS/AS]  
Preset scan.  
Scan play.  
When pressed and held for 1 second:  
Disc scan play. ()  
Preset scan.  
When pressed and  
held for 2 seconds:  
Auto store.  
When pressed and held  
for 2 seconds: Auto  
store.  
[AF]  
AF function on and off. Repeat play.  
When pressed and  
held for 1 second:  
When pressed and held for 1 second:  
No function.  
Disc repeat play. ()  
REG function on and off  
[PTY]  
PTY standby mode  
on and off.  
Random play.  
When pressed and held for 1 second:  
Disc random play. ()  
Switches between TV  
and VTR.  
Notes:  
• The remote control unit does not work when the panel is closed.  
• Some of the corresponding buttons on the main unit and remote control unit have different functions.  
• In the DVD changer mode, the remote control unit can not work for some items.  
• Please use the dedicated remote control in the DVD changer mode.  
()In the DVD changer mode, this remote control unit makes the same operation as that performed using  
the button with the same name on the remote control unit for the DVD changer.  
VRX653R  
13  
7. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
in the DCP (DETACHABLE CONTROL PANEL)  
case to prevent scratches.  
2. Lock the DCP/Operation Panel at the upper  
center until a click is heard.  
POWER button  
We recommend taking the DCP with you when  
leaving the car.  
Removing the DCP  
1. Turn the power off.  
2. Deeply push in the DCP RELEASE lever 6  
to release the DCP/Operation Panel.  
DCP/RALEASE lever  
3. Press the power button 1 to turn on the  
power .  
The unit will not accept any key inputs for 1  
second after the DCP has been reattached.  
CAUTION  
• The DCP can easily be damaged by  
shocks. After removing it, be careful not  
to drop it or subject it to strong shocks.  
3. Pull the DCP toward you and remove it.  
• If the Operation Panel is kept open, the  
DCP may drop due to vibration of the car.  
This results in damage to the DCP. So  
close the Operation Panel or remove the  
DCP to store into the case.  
• The connector connecting the main unit  
and the DCP is an extremely important  
part. Be careful not to damage it by  
pressing on it with fingernails,  
screwdrivers, etc.  
DCP/Operation Panel  
Note:  
If the DCP is dirty, wipe off the dirt with a soft,  
dry cloth only.  
Attaching the DCP  
1. Hold the DCP/Operation Panel with its rear  
side facing the main unit and, as shown in  
the figure below, put the lower edge of the  
panel onto the corresponding edge of the  
main unit.  
14  
VRX653R  
8. OPERATIONS  
Note: Be sure to read this chapter referring to the front diagrams of  
Basic Operations  
chapter 3. CONTROLSon page 5 (unfold).  
Adjusting the volume  
Operate the VOLUME button 2 in the direction  
CAUTION  
When the unit is turned on, starting and  
stopping the engine with its volume raised to  
the maximum level may harm your hearings.  
Be careful about adjusting the volume.  
of the arrows w (up) or z (down) to adjust  
the volume;  
w: Increases the volume.  
z: Decreases the volume.  
The volume level indicated in the display is in a  
range from 0 (minimum) to 33 (maximum).  
Note:  
Use this unit after starting the engine.  
CAUTION  
While driving, keep the volume at a level at  
which external sounds can be heard.  
Turning on and off the power  
Note:  
Switching the display  
When the panel is closed:  
Press the DISP button @ to select the desired  
display.  
Be careful about using this unit for a long time  
without running the engine. If you drain the cars  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
Each time you press the DISP button @, the  
display switches in the following order:  
1. Press the POWER button 1.  
2. The illumination and display on the unit light  
up. The unit automatically remembers its  
last operation mode and will automatically  
switch to display that mode.  
3. Press and hold the POWER button 1 for 1  
second or longer to turn off the power for the  
unit.  
Note:  
About the SYSTEM CHECK”  
The confirmation of connected equipment must be  
performed for this unit only when the wiring  
connection is complete and power is turned on to  
the unit first. When the power is supplied, SYSTEM  
and PUSH PWRappear alternately in the  
display. Press the POWER button 1, the system  
check starts inside the unit. When COMPLETE”  
appears, press once again the POWER button 1.  
Selecting a mode  
1. Press the FNC button 1 to change the  
mode of operation.  
Notes:  
2. Each time you press the FNC button 1, the  
mode of operation changes in the following  
order:  
Once selected, the preferred display becomes  
the default display. When a function adjustment  
such as volume is made, the display  
momentarily switches to that functions display,  
then returns back to the preferred display  
several seconds after the adjustment.  
Radio mode DAB mode CD changer  
mode DVD changer mode TV mode ➜  
Radio mode...  
External equipment not connected with  
CeNET is not selected.  
VRX653R  
15  
Basic Operations  
If a title has been input, it is shown in the SUB  
display. If no title has been input, ---------”  
appears in the display. To input a title, refer to the  
subsection Entering titlesin Other  
Functionssection.  
When adjusting the angle of the display be  
careful no to let your fingers get caught by  
the panel or instrument panel of the vehicle.  
3. To store the Color LCD display ¥ in the  
source unit, turn it to the horizontal position  
until a click is heard.  
For CD and TV, some special characters of the  
title, the PS name of the RDS, and the DAB  
service label will not be displayed on the  
Information Panel of the DCP. In this case, those  
characters will only be left blank.  
When CT data is not received, CT--:--appears  
in the display.  
Showing a mode display  
When the panel is open:  
Press the TITLE button ( to show the Title  
List display. In the Title List display, the titles of  
items stored in the PRESET buttons # 1 to 6  
are listed.  
Turning on and off the monitor  
Pressing the DISP button @ turns the monitor  
In the RDS tuner mode, a PS name is displayed.  
In the DAB mode, a service label is displayed.  
For detailed information, refer to the section  
Title list play.  
on and off.  
When a button is pressed or during security  
monitoring, the monitor-off mode is canceled.  
Opening and turning the display  
Notes:  
Mute  
Do not place any object on the open display.  
Do not drop any object on the movable part.  
Do not expose the display to shocks.  
1. Press the OPEN button ! to open the  
Color LCD display ¥.  
Each time you press the MUTE button $, mute  
is turned on and off.  
MUTEappears when mute is turned on.  
If the Color LCD display ¥ is left horizontally  
in the open position for 10 seconds or longer,  
it is automatically drawn in.  
Setting the Z-enhancer  
This unit comes with 3 types of sound tone effect  
stored in memory. Select the one you prefer.  
2. Turn the Color LCD display ¥ upwards to a  
good view angle.  
The factory default setting is Z-EHCR OFF.  
When a Z-enhancer comes on (1-3), Z-EHCR”  
appears in the display.  
When the monitor is turned upwards, a  
picture appears in the display. The  
Information Panel 4 display disappears.  
• “Z-EHCR 1(Z-Enhancer 1):  
Setting emphasizing bass.  
• “Z-EHCR 2(Z-Enhancer 2):  
Setting emphasizing treble.  
• “Z-EHCR 3(Z-Enhancer 3):  
Setting emphasizing bass and  
treble.  
• “Z-EHCR OFF(Z-Enhancer off):  
Neither bass nor treble are  
emphasized by the Z-enhancer.  
CAUTION  
Do not turn the display unless it is  
completely open.  
16  
VRX653R  
Basic Operations  
When the panel is closed:  
Adjusting the bass and treble  
Notes:  
Each time you press the Z-EHCR button 9,  
the tone effect changes in the following order:  
This function is enabled only when the panel is  
open.  
This function can be adjusted only when the Z-  
enhancer is OFF.  
Z-EHCR 1Z-EHCR 2Z-EHCR 3➜  
Z-EHCR OFFZ-EHCR 1...  
1. Press the A-M button & to change into the  
When the panel is open:  
AUDIO-MODE display.  
1. Press the A-M button & to change into the  
2. Operate the JOYSTICK ¡ upward or  
downward to select BAS/TRE. Then press  
the ENT at the center of the JOYSTICK ¡  
to change into the BASS/TREBLE adjusting  
display.  
AUDIO-MODE display.  
2. Operate the JOYSTICK ¡ upward or  
downward to select Z-EHCR. Press the  
ENT at the center of the JOYSTICK ¡ to  
change into the Z-enhancer selecting  
display.  
3. Operate the JOYSTICK ¡ rightward or  
leftward to adjust the BASSor TREBLE.  
3. Operate the JOYSTICK ¡ upward or  
4. Operate the JOYSTICK ¡ upward or  
downward to adjust a level (adjustment  
range: from -6 to 6).  
downward to select out of:  
TYPE 1(Z-Enhancer 1)  
Enhancer 2) TYPE 3(Z-Enhancer 3)  
OFF(Z-Enhancer off),  
TYPE 2(Z-  
5. When the adjustment is finished, operate  
the JOYSTICK ¡ rightward or leftward to  
move the cursor to MENU. Then press the  
ENT at the center of the JOYSTICK ¡ to  
return to the AUDIO-MODE display.  
and press the ENT at the center of the  
JOYSTICK ¡ to set a desired Z-enhancer.  
4. When the setting is finished, operate the  
JOYSTICK ¡ rightward or leftward to move  
the cursor to the MENU. Then press the  
ENT at the center of the JOYSTICK ¡ to  
return to the AUDIO-MODE display.  
Adjusting the balance and fader  
Note:  
This function is enabled only when the panel is  
open.  
To return from the AUDIO-MODE display to  
the STANDARD display, press the A-M  
button & once again.  
1. Press the A-M button & to change into the  
AUDIO-MODE display.  
2. Operate the JOYSTICK ¡ upward or  
downward to select BAL/FAD. Then press  
the ENT at the center of the JOYSTICK ¡  
to change into the BAL/FAD adjusting  
display.  
Adjusting the Z-enhancer  
Note:  
This function is enabled only when the panel is  
open.  
1. Press the A-M button & to change into the  
3. Operate the JOYSTICK ¡ rightward or  
AUDIO-MODE display.  
leftward to select BALANCEor FADER.  
2. Operate the JOYSTICK ¡ upward or  
downward to select Z-EH LVLlevel. Press  
the ENT at the center of the JOYSTICK ¡ to  
change into the Z-enhancer adjusting display.  
4. Operate the JOYSTICK  
¡
upward or  
downward to make an adjustment.  
Adjusting range of the balance: L13 to R13  
Adjusting range of the fader: front 12 / rear  
12  
3. Operate the JOYSTICK ¡ upward or  
downward to adjust the Z-enhancer level.  
5. When the adjustment is finished, operate  
the JOYSTICK ¡ rightward or leftward to  
move the cursor to MENU. Then press the  
ENT at the center of the JOYSTICK ¡ to  
return to the AUDIO-MODE display.  
When Z-Enhancer 1 is selected, you can  
adjust the bass in the range of 2.  
When Z-Enhancer 2 is selected, you can  
adjust the treble in the range of 2.  
When Z-Enhancer 3 is selected, you can  
adjust the bass and treble in the range of 2.  
4. When the adjustment is finished, operate  
the JOYSTICK ¡ rightward or leftward to  
move the cursor to MENU. Then press the  
ENT at the center of the JOYSTICK ¡ to  
return to the AUDIO-MODE display.  
VRX653R  
17  
Basic Operations  
Radio Operations  
Turning on/off the loudness  
Listening to the radio  
The loudness effect emphasizes the bass and  
treble to create a natural sound tone. When  
you are listening to music at a low volume, it is  
recommended to use the loudness effect.  
This function is enabled only when the panel is  
open.  
1. Press the A-M button & for 1 second or  
longer to select Loudness ON. The LD”  
indicator lights in the display.  
1. Press the FNC button 1 and select the  
RADIO mode. The frequency or PS is  
displayed.  
PS: Programme service name  
2. Press the BND button % and select the  
radio band. Each time the button is pressed,  
the radio reception band changes in the  
following order:  
FM1 FM2 FM3 AM (MW/LW)➜  
FM1...  
2. Press the A-M button & for 1 second or  
longer to select Loudness OFF. The LD”  
indicator goes off.  
3. Press the right or left side of the SEARCH  
button 2 to tune in the desired station.  
CT (Clock Time) function  
The CT function receives CT data sent from an  
RDS station and displays the time. Press the  
DISP button @ to switch to CT display.  
Tuning  
There are 3 types of tuning mode available,  
seek tuning, manual tuning and preset tuning.  
If CT is not being received, CT--:--appears in  
the display.  
Seek tuning  
There are 2 types of seek tuning: DX SEEK  
and LOCAL SEEK.  
Note:  
CT data is not transmitted in some countries and  
by some broadcast stations. Also, in some  
areas, the CT may not be displayed accurately.  
DX SEEK can tune in to receivable broadcast  
stations; LOCAL SEEK can tune in to only  
broadcast stations with a good reception  
condition.  
1. Press the BND button % and select the  
desired band. (FM or AM (MW, LW))  
2. Tune in to a station.  
If MANUis lit in the display (or when the  
panel is closed, if the indicator SRCHis not  
lit) press and hold the BND button % for 1  
second or longer. MANUin the display  
goes off (or when the panel is open the  
indicator SRCHlights) and seek tuning is  
now available.  
If TAis lit in the display, TP stations are  
automatically sought.  
G DX SEEK  
Press the right or left side of the SEARCH  
button 2 to automatically seek a station.  
When the right side of the SEARCH button  
2 is pressed, the station is sought in the  
direction of higher frequencies; when the  
left side of the SEARCH button 2 is  
pressed, the station is sought in the  
direction of lower frequencies.  
When seek tuning starts, DX SEEK”  
appears in the display.  
G LOCAL SEEK  
If you press and hold the right or left side of  
the SEARCH button 2 for 1 second, local  
seek tuning is carried out. Broadcast  
stations with good reception condition are  
selected.  
18  
VRX653R  
Radio Operations  
When local seeking starts, LO SEEK”  
appears in the display.  
Manual memory  
1. Press the BND button % and select the  
desired band. (FM or AM (MW/LW))  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
2. Select the desired station with seek tuning,  
manual tuning, or preset tuning.  
3. Press and hold one of the PRESET buttons  
# for 2 seconds or longer to store the  
current station into preset memory.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In quick  
tuning mode, you can quickly tune the desired  
frequency.  
Auto store  
1. Press the BND button % and select the  
Auto store is a function for storing up to 6  
stations that are automatically tuned in  
sequentially. If 6 receivable stations cannot be  
received, a previously stored station remains  
unoverwritten at the memory position.  
desired band. (FM or AM (MW/LW))  
If MANUis not lit in the display (or when  
the panel is closed, if the indicator SRCHis  
lit), press and hold the BND button % for 1  
second or longer. MANUappears in the  
display (or when the panel is closed, the  
indicator SRCHgoes off) and manual  
tuning is now available.  
1. Press the BND button % and select the  
desired band. (FM or AM (MW/LW))  
2. Press and hold the PS/AS button 5 for 2  
seconds or longer. The stations with good  
reception are stored automatically to the  
preset channels.  
2. Tune into a station.  
G Quick tuning:  
Press and hold the right or left side of the  
SEARCH button 2 for 1 second or longer  
to tune in a station.  
If auto store is performed in the FM bands,  
the stations are stored in FM3 even if FM1 or  
FM2 was chosen for storing stations.  
G Step tuning:  
Press the right or left side of the SEARCH  
button 2 to manually tune in a station.  
Preset scan  
Preset scan receives the stations stored in  
preset memory in order. This function is useful  
when searching for desired station in memory.  
Note:  
Manual tuning is cancelled if you do not  
operate the unit for 7 seconds or longer.  
1. Press the PS/AS button 5.  
Recalling a preset station  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio  
stations in memory. Pressing the  
2. When the desired station is tuned in, press  
the PS/AS button 5 again to continue  
receiving that station.  
corresponding PRESET button # recalls the  
stored radio frequency automatically.  
1. Press the BND button % and select the  
desired band. (FM or AM (MW/LW))  
2. Press the corresponding PRESET button #  
to recall the stored station.  
Press and hold one of the PRESET buttons  
# for 2 seconds or longer to store that  
station into preset memory.  
VRX653R  
19  
RDS Operations  
RDS (Radio Data System)  
1. Press the ADJ button * to show the  
adjustment selection display.  
This unit has a built in RDS decoder system  
that supports broadcast stations transmitting  
RDS data. This system can display the name  
of the broadcast station being received (PS)  
and can automatically switch to the broadcast  
station with the best reception as you move  
long distances (AF switching). Also, if a traffic  
announcement or programme type information  
is broadcast from an RDS station, no matter  
what mode you are in, this broadcast is  
received. Additionally, if EON information is  
received, this information enables automatic  
renewal of other preset stations on the same  
network and interruption of traffic  
2. Operate the JOYSTICK ¡ upward or  
downward to select “LINKACT”.  
3. Operate the JOYSTICK ¡ rightward or  
leftward to select “ON” or “OFF”. After  
selection, press the ENT at the center of the  
JOYSTICK ¡.  
ON:  
AF switching between DAB and RDS  
enabled.  
OFF:  
AF switching between DAB and RDS  
disabled.  
announcement and/or chosen program type  
from other stations (TP). This function is not  
available in some areas.  
4. Press the ADJ button * to return to the  
previous mode.  
When using the RDS function, always set the  
radio to FM mode.  
REG (Regional programme) function  
When the REG function is ON, the optimum  
regional station can be received. When this  
function is OFF, if the regional station area  
switches as you drive, a regional station for  
that region is received.  
The factory default setting is “OFF”.  
Notes:  
• This function is disabled when a national station  
such as BBC 2 FM is being received.  
• The REG function ON/OFF setting is valid when  
the AF function is ON.  
• “AF” : Alternative Frequency  
• “PS” : Programme Service Name  
• “PTY” : Programme Type  
• “EON” : Enhanced Other Network  
• “TP” : Traffic Programme  
RDS interrupt does not function during AM radio  
reception or in TV mode.  
AF function  
The AF function switches to a different  
frequency on the same network in order to  
maintain optimum reception.  
The factory default setting is “ON”.  
Switching OFF the AF function  
Turning the REG function ON  
When “REG” is not lit in the display, press and  
hold the AF button 7 for 2 seconds or longer.  
REG” lights in the display.  
Turning the REG function OFF  
Press the AF button 7. The “AF” indicator  
goes off.  
Press and hold the AF button 7 for 2 seconds  
or longer. “REG” in the display goes off.  
Switching ON the AF function  
Press the AF button 7. The “AF” indicator  
lights.  
Manually tuning a regional station  
in the same network  
Note:  
• This function can be used when a regional  
broadcast of the same network is received.  
If the reception of the current broadcast station  
deteriorates durably, “SEARCH” lights in the  
display and the radio searches for the same  
programme on another frequency.  
When the reception deteriorates, the “AF”  
indicator flickers.  
1. This function is valid when the AF function  
is ON and the REG function is OFF.  
2. Press any one of the PRESET buttons # to  
AF function between RDS and DAB  
call out a regional station.  
When the same programme is broadcast by  
both RDS and DAB, and this function is ON,  
the unit switches automatically to the broadcast  
with the better reception.  
This function only operates when the DAH9500z  
DAB unit, sold separately, is connected.  
3. Each time you press the same PRESET  
button #, the unit switches from a local  
station to the other on the same network.  
20  
VRX653R  
RDS Operations  
TA (Traffic Announcement)  
In TA standby mode, when a traffic  
announcement broadcast starts, the traffic  
announcement broadcast is received as top  
priority regardless of the function mode so you  
can listen to it. Traffic programme (TP)  
automatic tuning is also possible.  
PTY  
This function enables you to listen to a  
broadcast of the selected programme type  
when it starts, even if the unit operates on a  
function mode other than radio.  
RDS interrupt does not function during AM radio  
reception or in TV mode.  
Some countries do not yet have PTY broadcast.  
In TA standby mode, a TP station has priority  
over a PTY broadcast station.  
RDS interrupt does not function during AM radio  
reception or in TV mode.  
This function can only be used when TPis lit in  
the display. When TPis lit, this means that the  
RDS broadcast station being received has traffic  
announcement programmes.  
Selecting PTY  
1. When you press the PTY button 8, the unit  
Setting TA standby mode  
goes into PTY select mode.  
If you press the TA button 0 when only TPis  
lit in the display, TPand TAlight in the  
display and the unit is set into TA standby  
mode until a traffic announcement is  
broadcast. When a traffic announcement  
broadcast starts, TRA INFOappears in the  
display. If you press the TA button 0 while a  
traffic announcement broadcast is being  
received, the traffic announcement broadcast  
reception is cancelled and the unit goes into TA  
standby mode.  
2. Press any one of the PRESET buttons # to  
select a desired PTY. Alternatively, when the  
panel is closed, operate the SEARCH  
button 2 upward or downward to select a  
desired PTY.  
Below are the factory default settings stored  
for the PRESET buttons #.  
PTY item  
Preset  
number  
ENGLISH  
Contents  
1
2
3
4
5
6
NEWS  
News  
Cancelling TA standby mode  
INFO  
Information  
Pop music  
Sports  
With TPand TAare lit in the display, press  
the TA button 0. The TAin the display goes  
off and TA standby mode is cancelled.  
If TPis not lit, pressing the TA button 0  
searches for a TP station.  
POP M  
SPORT  
CLASSICS Classics  
M,O,R,M Middle of the road music  
Searching for a TP station  
3. The PTY select mode is cancelled automatically  
7 seconds after a PTY is selected.  
When TPis not lit, if you press the TA button  
0, TAlights in the display and the unit  
automatically searches a TP station.  
Cancelling PTY standby mode  
When you press the PTY button 8 for 1  
second or longer, the indicator PTYgoes off  
and PTY standby mode is cancelled.  
Note:  
If a TP station is not received, the unit continues  
the search operation. Pressing the TA button 0  
again makes the TAindicator go off and stops  
TP station searching.  
Cancelling a PTY interrupt broadcast  
Press the PTY button 8, during the PTY  
interrupt broadcast to display the subsidiary,  
the PTY interrupt is cancelled and the unit  
returns to PTY standby mode.  
Auto store function for TP stations  
You can automatically store up to 6 TP stations  
into preset memory. If the number of TP that  
can be received is less than 6, broadcast  
stations already stored in memory are left  
without being overwritten.  
PTY seek  
1. Press the PTY button 8, the PTY select  
mode is turned on.  
1. With TAlit in the display, press the PS/AS  
2. Select a desired PTY.  
button 5 for 2 seconds or more.  
3. Press the right or left side of the SEARCH  
button 2. If you press the right side, the  
unit seeks a PTY broadcast moving up the  
frequencies; if you press the left side, it  
seeks moving down the frequencies.  
2. The TP stations with the good reception  
condition are stored into preset memory.  
Even if you select FM1 or FM2, a TP station  
is stored into memory for FM3.  
VRX653R  
21  
RDS Operations  
If no station with the selected PTY broadcast  
can be received, the unit returns to the MAIN  
mode.  
Operating the PTY SELECT display  
when the panel is open  
1. Press the PTY button 8 to select the PTY  
SELECT display.  
PTY preset memory  
1. When you press the PTY button 8, the  
2. In the PTY SELECT display, PTY is  
selected and PTY memory can be adjusted.  
PTY select mode is turned on.  
Operate the JOYSTICK ¡ rightward or  
leftward to select PTY ITEMor PRESET”  
(by moving the cursor).  
2. Select a desired PTY.  
3. If you press and hold any one of the  
PRESET buttons # for 2 seconds or  
longer, the selected PTY is stored into that  
preset channel memory.  
3. When PTY ITEMis selected, PTY  
selection is carried out. Operate the  
JOYSTICK ¡ upward or downward to  
select a desired PTY. Press the ENT at the  
center of the JOYSTICK ¡ to set the  
selected PTY ITEM.  
The 29 types of PTY below can be selected.  
PTY item  
ENGLISH  
NEWS  
Contents  
News  
(The PTY ITEM thus set is listed at the  
lower right of the display.)  
AFFAIRS  
INFO  
Todays events  
Information  
Sports  
4. When PRESETis selected, PTY preset  
memory can be called for and stored.  
5. Operate the JOYSTICK ¡ upward or  
SPORT  
downward to select Preset Nos. 1 to 6.  
EDUCATE  
DRAMA  
Education  
Drama  
6. Press the ENT at the center of the  
JOYSTICK ¡ to call for the preset PTY  
ITEM.  
CULTURE  
SCIENCE  
VARIED  
Culture  
Science  
Press the ENT at the center of the  
JOYSTICK ¡ for 2 seconds to store the  
PTY ITEM currently selected to any Preset  
No. selected (listed at the lower right of the  
display).  
Variety  
POP M  
Pop music  
Rock music  
Middle of the road music  
Light music  
Classics  
ROCK M  
M,O,R, M  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
CHILDREN  
SOCIAL A  
RELIGION  
PHONE IN  
TRAVEL  
HOBBIES  
JAZZ  
7. After adjustment is finished, operate the  
JOYSTICK ¡ rightward or leftward to move  
the cursor to MENU, and press the ENT at  
the center of the JOYSTICK ¡ to return to  
the STANDARD display.  
Other music  
Weather  
Finance  
Emergency broadcast  
For children  
Social affairs  
Religion  
If an emergency broadcast is received, all the  
function mode operations are stopped.  
ALARMappears in the display and the  
emergency broadcast can be heard.  
RDS interrupt does not function during AM radio  
reception or in TV mode.  
Phone in  
Travel  
Hobbies  
Cancelling an emergency broadcast  
Jazz  
If you press the AF Button 7, emergency  
broadcast reception is cancelled.  
COUNTRY  
NATIONAL  
OLDIES  
Country  
National  
Oldies  
FOLK M  
Folk music  
Documentaries  
DOCUMENT  
22  
VRX653R  
RDS Operations  
CD Changer Operations  
Switching the PTY display language  
CD changer functions  
Note:  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all  
CD changer functions. This unit can control a  
total of 2 changers (DVD and CD).  
This function is enabled only when the panel is  
open.  
You can select one of 4 languages (English,  
German, Swedish or French) for the PTY  
displayed in the display.  
The factory default setting is GB(English).  
1. Press the ADJ button * to show the  
adjustment selection display.  
Press the FNC button 1 and select the CD  
changer mode to start play. If 2 CD changers  
are connected, press the FNC button 1 to  
select the CD changer for play.  
If NO MAGappears in the display, insert the  
magazine into the CD changer. LOADING”  
appears in the display while the player loads  
(checks) the magazine.  
2. Operate the JOYSTICK ¡ upward or  
downward to select "PTY LANG". After that,  
select a desired language by operating the  
JOYSTICK ¡ rightward or leftward and  
then press the ENT at the center of the  
JOYSTICK ¡ to change the setting.  
If NO DISCappears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
GB: English  
F: French  
CAUTION  
CD-ROM discs cannot be played in the CD  
changer.  
D: German  
S: Swedish  
3. Press the ADJ button *. The unit returns to  
the previous mode.  
Pausing play  
1. Press the PLAY/PAUSE button 3 to pause  
Volume setting of TA, emergency  
broadcast (ALARM) and PTY  
The volume for TA, ALARM and PTY interrupts  
play. PAUSEappears in the display.  
2. To resume play, press the PLAY/PAUSE  
button 3 again.  
can be set during TA, ALARM or PTY interrupt.  
The factory default setting is 15.  
During a TA, ALARM or PTY interrupt,  
operate the VOLUME button 2 upward or  
downward to set the volume to the desired  
level (00 to 33).  
When the TA, ALARM or PTY interrupt ends, the  
volume returns to the level it had before the  
interrupt.  
Displaying CD titles  
This unit can display title data for CD-text CDs  
and user titles input with this unit.  
Each time you press and hold the DISP button  
@ for 1 second or longer, the title display  
changes in the following order.  
When the panel is closed:  
User title (disc) CD-text title (disc) CD-  
text title (track) User title (disc)...  
When the panel is open:  
User title (disc) CD-text title (disc & track) ➜  
User title (disc)...  
Note:  
If the CD playing is not a CD-text CD or no user  
title has been input, ----------appears in the  
display.  
Scrolling a CD-text title  
When a CD-text title is longer than 16  
characters (8 characters when the panel is  
closed), you can scroll the display as follows.  
VRX653R  
23  
CD Changer Operations  
When the panel is closed:  
Fast-forward/Fast-backward  
Fast-forward  
1. Display the CD-text title (disc or track).  
2. Press and hold the BND button % for 1  
Press and hold the right side of the SEARCH  
button 2 for 1 second or longer.  
second or longer. The titles scroll.  
When the panel is open:  
Fast-backward  
1. Display the CD-text title (disc & track).  
Press and hold the left side of the SEARCH  
button 2 for 1 second or longer.  
2. Press and hold the TITLE button ( for 1  
second or longer to scroll the disc title.  
Top function  
The top function plays from the first track (track  
No. 1) of the disc.  
3. To scroll the track title, press for 1 second or  
longer the TITLE button ( within 30  
seconds after scrolling the disc title.  
Notes:  
When playing a disc 1 to 6  
If the disc title is shorter than 16 characters, the  
track titles begin to scroll immediately.  
If the track title is shorter than 16 characters, the  
track titles does not scroll.  
Press the DIRECT button # (1 to 6) with the  
same number as the CD playing.  
When playing a disc 7 to 12 (only when a  
12 disc CD changer is used.)  
Selecting a CD  
Each of the DIRECT buttons # corresponds to  
a disc loaded into the magazine.  
Press the DIRECT button # (7 to 12) with the  
same number as the CD playing for 1 second  
or longer.  
Selecting a disc from 1 to 6  
Scan play  
Press the corresponding DIRECT button (1 to  
The scan play locates and plays the first 10  
seconds of each track on a disc automatically.  
This function continues on the disc until it is  
cancelled or the mode is changed.  
The scan play is useful when you want to select  
a desired track.  
6) # to select the desired disc.  
Selecting a disc from 7 to 12 (only when  
a 12 disc CD changer is used.)  
Press the corresponding DIRECT button (7 to  
12) # for 1 second or more, then select the  
desired disc.  
1. Press the SCN button 5 to start scan play.  
2. Press the SCN button 5 again to cancel the  
Selecting a track  
Track-up  
scan play. Current track continues to play.  
1. Press the right side of the SEARCH button  
2 to move ahead to the beginning of the  
next track.  
Disc scan play  
The disc scan play locates and plays the first  
10 seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is cancelled or  
the mode is changed.  
2. Each time you press the right side of the  
SEARCH button 2, the track advances  
ahead to the beginning of the next track.  
Track-down  
The disc scan play is useful when you want to  
select a desired CD.  
1. Press the left side of the SEARCH button 2  
to move back to the beginning of the current  
track.  
1. Press the SCN button 5 for 1 second or  
longer to start disc scan play.  
2. Press the SCN button 5 again to cancel  
disc scan play. Normal disc play continues  
on the current track.  
2. Press the left side of the SEARCH button 2  
twice to move to the beginning of the  
previous track.  
24  
VRX653R  
CD Changer Operations  
Repeat play  
The repeat play continuously plays the current  
track. This function continues automatically until  
it is cancelled or the mode is changed.  
DVD Changer Operation  
DVD changer functions  
When an optional DVD changer is connected  
through the CeNET cable.  
In this case, this unit only provides a part of the  
DVD changer functions. As for other operations  
not written in this manual, operates with a remote  
control unit provided with your DVD changer. Refer  
to the DVD changer ownersmanual for details.  
1. Press the RPT button 7, to make repeat  
play starts. RPTlights in the display.  
2. To cancel repeat play, press the RPT button  
7 again. RPTgoes off from the display  
and the unit returns to normal play.  
This unit can control a total of 2 changers (CD  
or DVD).  
Press the FNC button 1 and select the DVD  
changer mode to start play.  
If NO MAGAZINEappears in the display, insert  
the magazine into the DVD changer.  
DISC CHECKINGappears in the display while  
the player loads (checks) the magazine.  
Disc repeat play  
After all tracks in the current disc have been  
played, the disc repeat play automatically  
replays the current disc over from the first  
track. This function continues automatically  
until it is cancelled or the mode is changed.  
If NO DISCappears in the display, eject the  
magazine and insert discs into each slot.  
Then, reinsert the magazine back into the DVD  
changer.  
1. When you press the RPT button 7 for 1  
second or longer, disc repeat play starts.  
D-RPTlights in the display.  
2. To cancel disc repeat play, press the RPT  
button 7 again. D-RPTgoes off from the  
display and the unit returns to normal play  
from the track being played.  
Pausing Play  
1. Press and hold the PLAY/PAUSE button 3  
to pause play. PAUSEappears in the dis-  
play.  
Random play  
2. To resume play, press the PLAY/PAUSE but-  
The random play selects and plays individual  
tracks on the disc in no particular order. This  
function continues automatically until it is  
cancelled or the mode is changed.  
ton 3 again.  
Slow Play (DVD video & video CD)  
1. Press and hold the PLAY/PAUSE button 3  
then press and hold the d button 2. While  
the button is being pressed, slow playback  
continues at the speed 1/2 times the normal  
playback.  
1. When you press the RDM button 8,  
random play starts. RDMlights in the  
display.  
2. To cancel random play, press the RDM  
button 8 again. RDMgoes off from the  
display and the unit returns to normal play.  
Slow playback cannot be performed in the  
backward direction. In addition, audio cannot  
be reproduced during slow playback.  
Disc random play  
The disc random play selects and plays  
individual tracks or discs automatically in no  
particular order. This function continues  
automatically until it is cancelled or the mode is  
changed.  
Selecting a disc  
1. Each of the DIRECT buttons # corresponds  
to a disc loaded into the magazine.  
2. Press the corresponding DIRECT buttons #  
(1 to 6) to select the desired disc.  
1. When you press the RDM button 8 for 1  
second or longer, disc random play starts.  
D-RDMlights in the display.  
2. To cancel disc random play, press the RDM  
button 8 again. D-RDMgoes off from the  
display and the unit returns to normal play  
from the track being played.  
VRX653R  
25  
DVD Changer Operation  
Press the d button 2, and playback  
starts from the beginning of the next chap-  
ter.  
Switching to a next disc(Disc Up  
function)  
The disc up function plays from the first track  
(track No1) of the next disc.  
Press the a button 2, and playback  
starts from the beginning of the current  
chapter.  
1. Press the BND button %.  
2. Each time you press the BND button %, the  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous chapter.  
disc changes to the next disc.  
The unit may return to the menu screen  
when the right or left side of the SEARCH  
button 2 is pressed.  
DVD-Video Operation  
Showing the DVD menu  
1. Press the TITLE button ( during playback.  
The DVD menus appears.  
Fast forward and fast backward  
1. Press and hold the right or left side of the  
SEARCH button 2 during playback.  
The displayed contents may differ,  
depending on the DVD software.  
Example showing menu display  
Press and hold the button, and the playback  
speed becomes 4-time faster first and then  
16-time faster 3 seconds later. Release the  
button, and the normal speed is restored.  
Notes:  
No audio is reproduced during fast forward  
and fast rewind operation.  
The fast forward and fast rewind speed may  
differ depending on the disc.  
The menu screen may appear when the button  
is pressed.  
Using the title menu  
On DVD discs containing two or more titles, you  
can select from the title menu for playback.  
Scan playback  
Scans and plays back all chapters recorded on  
the DVD-Video, the first 10 seconds for each.  
1. Press and hold the TITLE button ( for 1  
second or longer during playback.  
The title menu screen appears.  
1. Press the SCN button 5.  
Press the TITLE button (, and playback  
resumes from the scene played back  
before TITLE button ( is pressed.  
2. Press the SCN button 5 again and scan  
playback is turned off.  
Depending on the disc, the title menu  
cannot be called.  
Chapter repeat playback  
This operation plays back chapters recorded on  
the DVD-Video repeatedly.  
2. Operate the JOYSTICK ¡ upward,  
downward, leftward or rightward to select an  
item.  
1. Press the RPT button 7.  
2. Press the RPT button 7 again and repeat  
Depending on the disc, items cannot be  
selected with the ten-key buttons on the  
DVD changer remote control unit.  
playback is turned off.  
Skipping a chapter(searching)  
Title repeat playback  
About chapter  
This operation plays back titles recorded on the  
DVD-Video repeatedly.  
Chapter means a small segment to divide the  
data area of the disc.  
1. Press and hold the RPT button 7 for 1 sec-  
ond or longer.  
1. Press the right or left side of the SEARCH  
button 2 during playback.  
2. Press the RPT button 7 again and repeat  
playback is turned off.  
Chapters are skipped, as many as the times  
the button is pressed, and playback starts.  
26  
VRX653R  
DVD Changer Operation  
Scan playback  
This operation plays back all tracks on the disc,  
the first 10 seconds for each.  
Watching a video CD  
Showing the V-CD menu (for V-CD  
discs with PBC (Play Back Control))  
This key does not function on some discs.  
1. Press the TITLE button ( during playback.  
The V-CD menu appears.  
1. Press the SCN button 5.  
2. Press the SCN button 5 again and scan  
playback is turned off.  
If you are playing a disc with PBC and the  
PBC function is engaged, this operation  
cannot be performed.  
The displayed contents may differ,  
depending on the V-CD software.  
Example showing menu display  
Repeat playback  
This operation plays back one track recorded on  
the video CD repeatedly.  
1. Press the RPT button 7.  
2. Press the RPT button 7 again and repeat  
playback is turned off.  
If you are playing a disc with PBC and the  
PBC function is engaged, this operation  
cannot be performed.  
To select the menu contents, press the 10 key  
(DVD changer Remocon) according to the  
disc contents menu.  
Random playback  
This operation plays back all track on the disc in  
no particular order.  
Skipping a track (searching)  
1. Press the right or left side of the SEARCH  
button 2 during playback.  
1. Press the RDM button 8.  
2. Press the RDM button 8 again and random  
The track is skipped, and playback starts.  
playback is turned off.  
Press the d button 2, and playback  
If you are playing a disc with PBC and the  
PBC function is engaged, this operation  
cannot be performed.  
starts from the beginning of the next track.  
Press the a button 2, and playback  
starts from the beginning of the current  
track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
Listening to a CD  
Skipping a track (searching)  
1. Press the right or left side of the SEARCH  
button 2 during playback.  
This operation cannot be performed on some  
discs with PBC  
The tracks are skipped, as many as the  
times the button is pressed, and playback  
starts.  
Fast forward and fast backward  
1. Press and hold the right or left side of the  
SEARCH button 2 during playback.  
Press the d button 2, and playback  
starts from the beginning of the next track.  
Press and hold the button, and the playback  
speed becomes 4-time faster first and then  
Press the a button 2, and playback  
starts from the beginning of the current  
track.  
16-time faster 3 seconds later. Release the  
button, and the normal speed is restored.  
Notes:  
No audio is reproduced during fast forward  
and fast rewind operation.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
The unit may return to the menu screen when  
the button is pressed.  
VRX653R  
27  
DVD Changer Operation  
Press the a button 2, and playback  
starts from the beginning of the current  
track.  
Fast forward and fast backward  
1. Press and hold the right or left side of the  
SEARCH button 2 during playback.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
Press and hold the button, and the playback  
speed becomes 4-time faster first and then  
8-time faster 3 seconds later. Release the  
button, and the normal speed is restored.  
This operation skips the track over the folder.  
Fast forward and fast backward  
1. Press and hold the right or left side of the  
SEARCH button 2 during playback.  
Scan playback  
This operation plays back all tracks on the disc,  
the first 10 seconds for each.  
Press and hold the button, and the playback  
speed becomes 4-time faster first and then  
8-time faster 3 seconds later. Release the  
button, and the normal speed is restored.  
1. Press the SCN button 5.  
2. Press the SCN button 5 again and scan  
playback is turned off.  
Track repeat playback  
This operation plays back one track recorded on  
the CD repeatedly.  
Track scan playback  
This operation plays back all files recorded on  
the disc, about 10 seconds for each.  
1. Press the RPT button 7.  
1. Press the SCN button 5.  
2. Press the RPT button 7 again and repeat  
2. Press the SCN button 5 again and scan  
playback is turned off.  
playback is turned off.  
Disc repeat playback  
Folder scan playback  
This operation plays back the first files of all  
folders on the MP3 disc, about 10 seconds for  
each.  
This operation plays back all tracks on the disc  
repeatedly (with music CDs only).  
1. Press and hold the RPT button 7 for 1 sec-  
ond or longer.  
1. Press and hold the SCN button 5 for 1 sec-  
2. Press the RPT button 7 again and repeat  
ond or longer.  
playback is turned off.  
2. Press the SCN button 5 again and scan  
playback is turned off.  
Random playback  
This operation plays back all track on the disc in  
no particular order.  
Track repeat playback  
This operation plays back the file currently being  
played back repeatedly.  
1. Press the RDM button 8.  
2. Press the RDM button 8 again and random  
1. Press the RPT button 7.  
playback is turned off.  
2. Press the RPT button 7 again and repeat  
playback is turned off.  
Listening to an MP3  
Folder repeat playback  
This operation plays back files in an MP3 folder  
repeatedly..  
Skipping a track (searching)  
1. Press the right or left side of the SEARCH  
button 2 during playback.  
1. Press and hold the RPT button 7 for 1 sec-  
The tracks are skipped, as many as the  
times the button is pressed, and playback  
starts.  
ond or longer.  
2. Press the RPT button 7 again and repeat  
playback is turned off.  
Press the d button 2, and playback  
starts from the beginning of the next track.  
28  
VRX653R  
DVD Changer Operation  
TV Operations  
TV functions  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner.  
Track random playback  
This operation plays the file in the folder in ran-  
dom order.  
1. Press the RDM button 8.  
2. Press the RDM button 8 again and random  
playback is turned off.  
WARNING  
For your safety, the driver should not  
watch the TV or operate the controls while  
driving. Please note that watching and  
operating the TV while driving are  
Folder random playback  
This operation plays back tracks recorded on  
the disc in no particular order.  
1. Press and hold the RDM button 8 for 1 sec-  
prohibited by law in some countries.  
ond or longer.  
2. Press the RDM button 8 again and random  
Watching TV  
Notes:  
playback is turned off.  
For your safety, the VRX653R has a safety  
function which turns off the picture when the car  
is moving, so only the audio can be heard. The  
picture can only be watched when the car is  
stopped and the parking break is applied.  
After setting a country to be received, tune in to  
a station. For setting the country, see the  
subsection Setting the TV area.  
Selecting a file (track) on the  
screen  
1. Press the TITLE button ( during playback.  
Files (tracks) are displayed.  
2. Operate the JOYSTICK ¡ upward or  
downward to select a file, and confirm it by  
pressing ENT at the center of the JOYSTICK  
¡.  
1. Press the FNC button 1 and select the TV  
mode.  
If no further operation is performed for 7  
2. Press the BND button % to select the  
desired TV band (TV1 or TV2). Each time  
the button is pressed, the input selection  
toggles between TV1 and TV2.  
seconds, the STANDARD screen is returned.  
Notes:  
With the panel of the main unit closed, the remote  
control unit supplied with the DVD changer  
cannot be operated.  
While the panel of the main unit is closed, DVD  
A/Cis shown on the information panel.  
3. Press the right or left side of the SEARCH  
button 2 to tune in the desired TV station.  
While the car is moving, the panel displays the  
name of the current mode, time and AUDIO  
PROGRAM ONLY.  
Watching a video  
The TV tuner has a VTR input terminal to  
which 1 external device can be connected.  
Connect a 12V video cassette player (VCP) or  
video cassette recorder (VCR) to the TV tuner  
input terminal.  
1. Press the PTY/RDM button 8 and select  
the VTR.  
2. To return to the TV broadcast, press the  
PTY/RDM button 8 again.  
Tuning  
There are 3 types of tuning mode available,  
seek tuning, manual tuning and preset tuning.  
VRX653R  
29  
TV Operations  
Seek tuning  
Press and hold one of the PRESET buttons  
# for 2 seconds or longer to store the  
current station into the preset memory.  
1. Press the BND button % and select the  
desired TV band (TV1 or TV2).  
If MANUis lit in the display (or when the  
panel is closed, if the indicator SRCHis not  
lit), press and hold the BND button % for 1  
second or longer. MANUin the display  
goes off (or when the panel is closed, the  
indicator SRCHlights) and seek tuning is  
now available.  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
2. Press and hold one of the PRESET buttons  
# for 2 seconds or longer to store the  
current station to that preset memory.  
2. Press the right or left side of the SEARCH  
button 2 to automatically seek a station.  
Press the right side of the SEARCH button  
2 to automatically tune up the frequency  
band to the next available TV station; press  
the left side to automatically tune down.  
Auto store  
Auto store selects 6 TV stations automatically  
and stores each one into a preset memory.  
If there are not 6 stations with good reception,  
stations previously stored in memory remain  
and only the strong stations are stored into  
memory.  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning. When you are in the step tuning  
mode, the frequency changes one step at a  
time. In quick tuning mode, you can quickly  
tune the desired frequency.  
1. Press the BND button % and select the  
desired TV band. (TV1 or TV2)  
2. Press and hold the PS/AS button 5 for 2  
seconds or longer. The stations with good  
reception are automatically stored to the  
PRESET buttons # .  
1. Press the BND button % and select the  
desired band. (TV1 or TV2)  
If MANUis not lit in the display (or when the  
panel is closed, if the indicator SRCHis lit),  
press and hold the BND button % for 1 second  
or longer. MANUappears in the display (or  
when the panel is closed, the indicator SRCH”  
goes off) and manual tuning is now available.  
Preset scan  
Preset scan allows the user to view each  
preset position before it automatically  
advances to the next preset. This function is  
useful for searching for desired TV station in  
memory.  
2. Tune into a station.  
Quick tuning:  
1. Press the PS/AS button 5.  
Press and hold the right or left side of the  
SEARCH button 2 for 1 second or longer to  
tune in a station.  
2. When the desired channel is received,  
press the PS/AS button 5 again.  
Step tuning:  
Switching the VTR system between  
NTSC and PAL  
Press the right or left side of the SEARCH  
button 2 to manually tune in a station.  
Note:  
Manual tuning is cancelled if you do not operate  
the unit for 7 seconds longer.  
This function is enabled only when the panel is  
open.  
Switch to the VTR or DVD changer mode you  
use.  
1. Press the ADJ button * to switch to the  
Recalling a preset station  
adjustment selection display.  
A total of 12 TV stations can be stored (6-TV1  
and 6-TV2). This allows you to select your  
favorite TV stations and store them in memory  
for later recall.  
2. Operate the JOYSTICK ¡ upward or  
downward to move the cursor to VTR N/P.  
3. Operate the JOYSTICK ¡ rightward or  
leftward to move the cursor to select  
NTSCor PAL.  
1. Press the BND button % and select the  
desired TV band. (TV1 or TV2)  
4. Press the ENT at the center of the JOYSTICK  
¡ to set the selected VTR or DVD changer  
mode.  
2. To recall a stored TV station, press the  
desired PRESET button # to select that  
station.  
30  
VRX653R  
TV Operations  
Setting the TV area  
Adjusting the brightness and tone  
of color  
This function is enabled only when the panel is  
open.  
Notes:  
When you select the TV area (TV reception  
area), the TV tuner area setting changes.  
This operation is available only when the car is  
stopped and the parking brake is applied.  
This function is not available when the display is  
stored.  
The HUE setting can be adjusted only when the  
NTSC mode is selected.  
1. Press the ADJ button * to switch to the  
adjustment selection display.  
2. Operate the JOYSTICK ¡ upward or  
downward to move the cursor to TV AREA”  
and press the ENT at the center of the  
JOYSTICK ¡ to display a list of country  
name.  
1. Press the BND button % to switch to the  
adjustment selection display.  
2. Operate the JOYSTICK ¡ upward or  
downward to select the option MONI ADJ”  
(by moving the cursor).  
3. Operate the JOYSTICK ¡ upward or  
downward to select a desired country. Then  
press the ENT at the center of the  
JOYSTICK ¡ to set it.  
3. Press the ENT at the center of the  
JOYSTICK ¡.  
4. Operate the JOYSTICK ¡ rightward or  
leftward to select BRIGHT,COLORor  
HUE(by moving the cursor).  
4. When the setting is finished, operate the  
JOYSTICK ¡ rightward or leftward to  
move the cursor MENU. Then press the  
ENT at the center of the JOYSTICK ¡ to  
return to the adjustment selection display.  
BRIGHT:  
Adjust the brightness of the display.  
COLOR:  
Setting the TV diver  
Adjusts the color saturation.  
HUE:  
This function is enabled only when the panel is  
open.  
Adjusts the tone of color (red is emphasized  
or green is emphasized.)  
Normally use the TV diver with the ON”  
position.  
You can change the reception setting for the  
TV antenna connected to the TV tuner.  
5. Operate the JOYSTICK ¡ upward or  
downward to adjust a level.  
1. Press the ADJ button * to switch to the  
6. When the adjustment is made, operate the  
JOYSTICK ¡ rightward or leftward to move  
the cursor to MENU. Then press the ENT  
at the center of the JOYSTICK ¡ to return  
to the adjustment selection display.  
adjustment selection display.  
2. Operate the JOYSTICK ¡ upward or  
downward to select TV DIVER.  
3. Operate the JOYSTICK ¡ rightward or  
leftward to select ONor OFFand press  
the ENT at the center of the JOYSTICK ¡  
to set the selected reception setting.  
ON:  
Sets reception emphasizing the visual.  
OFF:  
Sets the diver setting to OFF.  
4. Press the ADJ button * to return to the  
previous mode.  
VRX653R  
31  
TV Operations  
Digital Radio/DAB  
Operations  
Changing over TV display size  
This function is available only when the panel is  
About DAB programmes  
open.  
The Digital Audio Broadcasting (hereinafter  
referred to as DAB) system transmits several  
programmes on one frequency simultaneously,  
by compressing audio signals.  
The group of programmes, which is transmitted  
on a single frequency is called ensemble.  
Some DAB stations have several ensembles  
and broadcast diversified programmes.  
The number of programmes and the contents  
which an ensemble provides depend on the  
broadcast stations and times. Since DAB  
programmes are broadcast on several different  
frequencies, the same programme can be  
enjoyed over large areas.  
1. Press the DISP button @ for 1 second or  
longer to display playback information such  
as screen size.  
2. Each time you press the DISP button @ for  
1 second or longer to change over the TV  
display size, the TV display size changes in  
the following order:  
NORMALWIDEF. WIDE➜  
CINEMANORMAL”  
NORMAL: (normal display)  
There is a black area at both right and left  
ends of a display. In case of normal TV  
broadcasting (4:3), the image can be shown  
without being cut or deformed.  
A DAB station has multiple programmes on  
one frequency.  
WIDE: (wide mode)  
When you turn the unit on and select DAB  
mode, the programme that starts is the one  
that was selected before when the power was  
turned off. If this programme is not available,  
another programme is selected automatically.  
NTSC: The image at right and left ends in a  
display elongates horizontally.  
PAL: The image may be slightly cut off at  
the top and bottom of the screen.  
Programmes have their own names, just like  
PS on RDS.  
Note:  
For sophisticated audio quality, the receiver  
needs to tune on a DAB Ensemble. While the  
receiver is being tuned in to the DAB Ensemble,  
the Audio outputs are muted. The tuning time is  
not fixed.  
F. WIDE: (full wide mode)  
The whole image elongates horizontally.  
CINEMA: (cinema mode)  
The image at both top and bottom in a  
display disappears.  
Notes:  
When a normal 4:3 size image, not being a wide  
one, is viewed by displaying it fully on a wide TV  
display in a wide mode or a full-wide mode, a  
part of the peripheral image will be lacking or  
deformed. In deference to the intention of  
producer, an original image can be viewed in a  
normal mode.  
Listening to the DAB  
1. Press the FNC button 1 and select the  
DAB mode.  
2. Press the right or left side of the SEARCH  
button 2 to tune in the desired station.  
During superimposed display, it becomes a full-  
wide mode.  
In the DVD changer, when the monitor display  
size is set in the CINEMA and WIDE (PAL)  
modes, a part of playback display such as play  
time may not be shown depending on the play  
disc.  
Tuning  
There are 3 types of tuning mode available,  
seek tuning, manual tuning and preset tuning.  
In this case, change the monitor display size to a  
mode other than the CINEMA and WIDE (PAL)  
modes.  
Seek tuning  
1. Press the FNC button 1 to select DAB  
mode.  
2. Press and hold right or left for 1 second or  
longer using the SEARCH button 2.  
The unit stops the seek tuning when it cannot  
find a DAB station. The display returns to the  
previous mode.  
32  
VRX653R  
Digital Radio/DAB Operations  
Manual tuning  
Switching programmes  
1. Press the FNC button 1 to receive a DAB  
1. Press the FNC button 1 to select DAB  
mode.  
station.  
2. Press and hold the BND button % for 1  
2. Select right or left to switch programmes in  
second or longer.  
a DAB station using the SEARCH button 2.  
Note:  
3. Select right or left to select a station using  
Programmes may not be switched depending on  
DAB station or broadcasting time.  
the SEARCH button 2.  
The unit stops the seek tuning when it cannot  
find a DAB station. The display returns to the  
previous mode.  
Programme scan  
Note:  
This function scans through each receivable  
programme in a DAB station being received for  
10 seconds sequentially. This is useful when  
you want to search for a desired programme.  
Manual tuning is cancelled if you do not operate  
the unit for 7 seconds or longer.  
Recalling a preset station  
1. Press the FNC button 1 to receive a DAB  
This unit has another preset memory function  
for DAB stations. Up to 18 stations (6 for each  
[MEM1], [MEM2] and [MEM3]) can be preset in  
the PRESET buttons #.  
station.  
2. Press the PS/AS button 5. The unit starts  
scanning each programme for 10 seconds  
sequentially.  
1. Press the FNC button 1 to select DAB  
3. When a programme which you want to  
listen is tuned in, press the PS/AS button 5  
once again.  
mode.  
2. Press the BND button % to select anyone  
of [MEM1], [MEM2] and [MEM3]. Each time  
you press the BND button %, the display  
changes in the following order:  
AF function  
The AF function switches to a different  
frequency on the same network in order to  
maintain optimum reception.  
The factory default setting is ON.  
Switching OFF the AF function  
[MEM1] [MEM2] [MEM3] [MEM1]...  
3. Press the corresponding the PRESET  
button # to recall the stored station.  
Note:  
Press and hold one of the PRESET buttons #  
for 2 seconds or longer to store that station into  
preset memory.  
Press the AF button 7, the AFindicator goes  
off.  
Switching ON the AF function  
Manual memory  
1. Press the FNC button 1 to select DAB  
Press the AF button 7, the AFindicator  
lights.  
mode.  
If the reception of the current broadcast station  
deteriorates, SEARCHlights in the display and  
the radio searches for the same programme on  
another frequency.  
When AF is ON, if the reception of an RDS  
broadcast deteriorates, the AF indicator flickers.  
2. Press the BND button % to select anyone  
of [MEM1], [MEM2] and [MEM3].  
3. Select the desired station using seek tuning,  
manual tuning or preset tuning, using the  
SEARCH button 2.  
AF function between RDS and DAB  
4. Press and hold one of the PRESET buttons  
# for 2 seconds or longer to store the  
current station into preset memory.  
Refer to the item of RDS tuner.  
TA (Traffic Announcement)  
In TA standby mode, when a traffic  
announcement broadcast starts, the traffic  
announcement broadcast is received as top  
priority regardless of the function mode so you  
can listen to it. Traffic programme (TP)  
automatic tuning is also possible.  
RDS interrupt does not function during AM radio  
reception or in TV mode.  
VRX653R  
33  
Digital Radio/DAB Operations  
This function can only be used when TPis lit in  
the display. When TPis lit, this means that the  
RDS broadcast station being received has traffic  
announcement programmes.  
Information select  
This function allows selecting a type of  
INFORMATION on INFORMATION interrupt  
mode. You can set any of the 6 types of INFO  
below:  
Setting TA standby mode  
If you press the TA button 0 when only TPis  
lit in the display, TPand TAlight in the  
display and the unit is set into TA standby  
mode until a traffic announcement is  
broadcast. When a traffic announcement  
broadcast starts, TRA INFOappears in the  
display. If you press the TA button 0 while a  
traffic announcement broadcast is being  
received, the traffic announcement broadcast  
reception is cancelled and the unit goes into TA  
standby mode.  
TRAFFIC, WARNING, NEWS INFO,  
WEATHER, EVENTS, SP. EVENT  
This function is enabled only when the panel is  
open.  
1. Press the ADJ button *.  
2. Operate the JOYSTICK ¡ upward or  
downward to select INFO SEL. Press the  
ENT at the center of the JOYSTICK ¡ to  
change into the INFO selecting display.  
3. Operate the JOYSTICK ¡ upward or  
downward to select a desired  
Cancelling TA standby mode  
INFORMATION. ONand OFFitems are  
displayed to the right.  
With TPand TAlit in the display, press the  
TA button 0. The TAindicator in the display  
goes off and TA standby mode is cancelled.  
If TPis not lit, pressing the TA button 0  
searches for a TP station.  
4. Operate the JOYSTICK ¡ rightward or  
leftward to select ONand press the ENT at  
the center of the JOYSTICK ¡ to set it.  
Searching for a TP station  
5. When the setting is finished, operate the  
JOYSTICK ¡ rightward or leftward to move  
the cursor to the MENU. Then press the  
ENT at the center of the JOYSTICK ¡ to  
return to the adjustment display.  
When TPis not lit, if you press the TA button  
0, the TAin the display lights and the unit  
automatically searches a TP station.  
Information standby mode  
PTY  
When the INFORMATION programme selected  
in the INFO SELdisplay of the adjustment  
mode starts, the unit switches to the selected  
INFORMATION programme automatically.  
This function enables you to listen to the  
selected programmes type, irrespective of the  
function mode.  
RDS interrupt does not function during AM radio  
reception or in TV mode.  
For details on Information select, refer to the  
procedure below.  
DAB and RDS have the same PTY.  
You can select one PTY from DAB or RDS.  
PTY broadcast are not yet available in all  
countries.  
In INFO standby mode, INFO stations have  
priority over PTY stations.  
In TA standby mode, TP stations have priority  
over PTY broadcasting station.  
1. Press the TA button 0, for 1 second or  
longer, INFOlights in the display and the  
unit is set to INFORMATION standby mode  
until INFORMATION starts.  
* If you press the TA button 0 while the  
INFORMATION programme is being  
broadcast, the programme broadcast is  
cancelled and the unit enters INFORMATION  
standby mode.  
Selecting PTY  
1. When you press the PTY button 8, the unit  
2. To cancel INFORMATION standby mode,  
press the TA button 0 again for 1 second  
or longer.  
goes into PTY select mode.  
Note:  
2. Press any one of the PRESET buttons # to  
select the desired PTY. Alternatively, when  
the panel is closed, operate the SEARCH  
Only in case of DAB connection, this can be  
operated even in the RDS tuner mode.  
button 2 upward or downward to select a  
desired PTY.  
34  
VRX653R  
Digital Radio/DAB Operations  
Below are the factory default settings stored  
channel memory.  
PTY item  
for PRESET buttons #.  
PTY item  
Contents  
News  
Preset  
number  
ENGLISH  
NEWS  
Contents  
News  
ENGLISH  
NEWS  
1
2
3
4
5
6
AFFAIRS  
INFO  
Todays events  
Information  
Sports  
INFO  
Information  
Pop music  
Sports  
POP M  
SPORT  
SPORT  
EDUCATE  
DRAMA  
Education  
Drama  
CLASSICS Classics  
M,O,R,M Middle of the road music  
CULTURE  
SCIENCE  
VARIED  
Culture  
Science  
3. The PTY select mode is cancelled  
automatically 7 seconds after a PTY is  
selected.  
Variety  
POP M  
Pop music  
Rock music  
Middle of the road music  
Light music  
Classics  
Cancelling PTY standby mode  
ROCK M  
M,O,R, M  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
CHILDREN  
SOCIAL A  
RELIGION  
PHONE IN  
TRAVEL  
HOBBIES  
JAZZ  
Press the PTY button 8 for 1 second or longer  
to turn off PTYin the display and cancel the  
PTY standby mode.  
Other music  
Weather  
PTY seek  
1. Press the PTY button 8, the PTY select  
mode is turned on.  
Finance  
2. Select a desired PTY.  
For children  
Social affairs  
Religion  
3. Press the right or left side of SEARCH  
button 2. If you press the right side, the  
unit seeks a PTY broadcast moving up the  
frequencies; if you press the left side, it  
seeks moving down the frequencies.  
Phone in  
Travel  
Hobbies  
If no station with the selected PTY broadcast  
can be received, the unit returns to PTY  
select mode.  
Jazz  
COUNTRY  
NATIONAL  
OLDIES  
Country  
National  
PTY preset memory  
1. Press the PTY button 8, the PTY select  
Oldies  
FOLK M  
Folk music  
Documentaries  
mode is turned on.  
DOCUMENT  
2. Select a desired PTY.  
3. If you press and hold any one of the  
PRESET buttons # for 2 seconds or longer,  
the selected PTY is stored into that preset  
Operating the PTY SELECT display  
when the panel is open  
1. Press the PTY button 8 to select the PTY  
SELECT display.  
2. In the PTY SELECT display, PTY is  
selected and PTY memory can be adjusted.  
Operate the JOYSTICK ¡ rightward or  
leftward to select PTY ITEMor PRESET”  
(by moving the cursor).  
VRX653R  
35  
Digital Radio/DAB Operations  
3. When PTY ITEMis selected, PTY  
selection is carried out. Operate the  
JOYSTICK ¡ upward or downward to  
select a desired PTY. Press the ENT at the  
center of the JOYSTICK ¡ to set the  
selected PTY ITEM.  
Dynamic Label Function  
A dynamic label (hereinafter referred to as  
DLS) is a text data associated with each DAB  
service. This set can display DLS up to 128  
characters in a display.  
This function is enabled only when the panel is  
open.  
(The PTY ITEM thus set is listed at the  
lower right of the display.)  
4. When PRESETis selected, PTY preset  
DLS display mode  
memory can be called for and stored.  
Press the TITLE button ( for 1 second or  
longer to place in the DLS display mode. To  
cancel the DLS mode and return to the  
previous display, press the TITLE button (  
again. If there is a DLS data in the reception  
service, DLS text is displayed in the text  
displaying area.  
5. Operate the JOYSTICK ¡ upward or  
downward to select Preset Nos.1 to 6.  
6. Press the ENT at the center of the  
JOYSTICK ¡ to call for the preset PTY  
ITEM.  
Press the ENT at the center of the  
A mark Îappears at the head of a whole  
text sentence (page), and a RETURN mark is  
indicated at the end point.  
JOYSTICK ¡ for 2 seconds to store the  
PTY ITEM currently selected to any Preset  
No. selected (listed at the lower right).  
7. After adjustment is finished, operate the  
JOYSTICK ¡ rightward or leftward to move  
the cursor to MENU, and press the ENT at  
the center of the JOYSTICK ¡ to return to  
STANDARD display.  
DLS memory  
Up to six DLS, currently being received, can be  
stored. By pressing the PRESET button # 1 to  
6 for 2 seconds or longer, the DLS page  
currently being displayed is stored. Operating  
the JOYSTICK ¡ rightward or leftward moves  
a cursor to either P1 through P6, and pressing  
the ENT at the center of the JOYSTICK ¡ for  
2 seconds stores it.  
Emergency broadcast  
If an emergency broadcast is received, all the  
function mode operations are stopped.  
ALARMappears in the display and the  
emergency broadcast can be heard.  
RDS interrupt does not function during AM radio  
reception or in TV mode.  
DLS Calling  
To call the DLS stored in the DLS memory,  
press the PRESET button #. The DLS in the  
DLS memory is displayed by 16 characters (2  
lines) at the intervals of 5 seconds (automatic  
calling). To display at shorter intervals, press  
the PRESET button # while waiting for  
successive DLS character string to be  
displayed, the following DLS character string is  
displayed (manual calling).  
Cancelling an emergency broadcast  
If you press the AF Button 7, emergency  
broadcast reception is cancelled.  
Volume setting of TA, emergency  
broadcast (ALARM), information  
and PTY  
The volume for TA, ALARM, information and  
PTY interrupts can be set during TA, ALARM or  
PTY interrupts.  
With the DLS memory being called, move the  
cursor to UPDATEand press the ENT at the  
center of the JOYSTICK ¡. The display is  
changed into the DLS display being received.  
The factory default setting is 15.  
During a TA, ALARM or PTY interrupt, operate  
the VOLUME button 2 upward or downward to  
set the volume to the desired level (00 to 33).  
When the TA, ALARM, information or PTY  
interrupt ends, the volume returns to the level it  
had before the interrupt.  
36  
VRX653R  
NAVI Operations  
NAVI functions  
When Clarion Navigation (hereinafter referred  
to as NAVI) is connected, the following  
functions are enabled:  
NAVI operation  
Changeover between NAVI display and Audio/  
Visual (hereinafter referred to as AV) displays.  
When the panel is open, the NVG/AV button )  
has the same function as the NVG/AV button  
) on the NAVI remote controller to set a  
screen mode and a NAVI interruption.  
Showing the NAVI display;  
NAVI guidance sound interruption;  
Remote operation of navigation functions by  
the remote controller through the optic  
sensor.  
Operate this button to change over between  
NAVI and AV displays.  
While interrupting the NAVI audio signal, an  
audio sound level is decreased and the NAVI  
guidance sound output is mixed.  
NAVI guidance sound interruption is possible  
even when the panel is closed, however in this  
case, only the Audio Display is showed.  
When the NAVI Display/NAVI guidance sound  
interruption setting (NAVI operation) is turned to  
the NAVI/NAVI mode on this unit, the audio  
sound level is decreased.  
Setting Clarion NAVI as external  
input equipment  
Be sure to perform this setting after connecting  
Clarion NAVI.  
The factory default setting is NAVI.  
1. When the panel is open, press the ADJ  
button * to show the adjustment selection  
display.  
2. Operate the JOYSTICK ¡ upward or  
downward to select INPUT. A menu bar is  
shown to the right to select the following  
items:  
NAVI: Setting when Clarion NAVI  
(NAX9500E, NAX943DV) is connected;  
CCD: Setting when Clarion CCD  
camera is connected to this unit;  
RGB: Setting when a RGB image of  
other companys equipment is input;  
COM: Setting when a composite image  
of other companys equipment is input.  
These settings cannot be selected when the  
DVD changer is connected.  
3. Operate the JOYSTICK ¡ rightward or  
leftward to select NAVI. Press ENT at the  
center of the JOYSTICK ¡ to set  
connection of Clarion NAVI.  
VRX653R  
37  
CCD Camera  
Connecting other  
companys image equipment  
Monitoring the CCD camera  
RGB type or composite type images from other  
companys equipment can be displayed on this  
unit  
The CCD camera can be connected to this  
unit. For the power supply of the camera,  
mount the power box sold separately (CCA-  
188).  
Be sure to perform this setting after connecting  
the RGB type or composite type image  
equipment to the RGB terminal.  
The factory default setting is NAVI.  
1. When the panel is open, press the ADJ  
button * to show the adjustment selection  
display.  
Notes:  
This function is not available when the display is  
stored.  
When the TV tuner and CCD camera are to be  
connected to this unit, connect the CCD camera  
to the CCD input terminal on this unit.  
Refer to the subsection Sample System 3in  
9. SAMPLE SYSTEMSsection.  
2. Operate the JOYSTICK ¡ upward or  
downward to select INPUT. A menu bar is  
shown to the right to select the following  
items:  
Setting CCD as an external input  
equipment  
Be sure to perform this setting after connecting  
NAVI: Setting when Clarion NAVI is  
connected;  
the CCD.  
CCD: Setting when Clarion CCD  
camera is connected to this unit;  
The factory default setting is NAVI.  
1. When the panel is open, press the ADJ  
button * to show the adjustment selection  
display.  
RGB: Setting when a RGB image of  
other companys equipment is input;  
COM: Setting when a composite image  
of other companys equipment is input.  
2. Operate the JOYSTICK ¡ upward or  
downward to select INPUT. A menu bar is  
shown to the right to select the following  
items:  
3. Operate the JOYSTICK ¡ rightward or  
leftward to select RGBor COM.  
NAVI: Setting when Clarion NAVI is  
connected;  
To connect an RGB equipment:  
If the image equipment to connect is RGB  
type, select RGB. Equipment capable to  
be connected should have positive polarity  
signal of 0.7 V p-p for RGB, and negative  
polarity signal of 0.3 V p-p for synchronous  
signal.  
CCD: Setting when Clarion CCD  
camera is connected to this unit;  
RGB: Setting when a RGB image of  
other companys equipment is input;  
COM: Setting when a composite image  
of other companys equipment is input.  
To connect a composite type  
equipment:  
3. Operate the JOYSTICK ¡ rightward or  
leftward to select CCD. Press the ENT at  
the center of the JOYSTICK ¡ to set  
connection of the CCD.  
If the image equipment to connect is a  
Compositetype, select COM.  
These settings cannot be selected when the  
DVD changer is connected.  
4. Then, press the ENT at the center of the  
JOYSTICK ¡ to set the connection.  
Display changeover  
When the panel is open, it is possible to  
change over between AV display and external  
equipment display using the NVG/AV button  
).  
38  
VRX653R  
Other Functions  
3. If you press and hold the TITLE button (  
for 1 second or longer, the display switches  
to the title input mode display.  
Always turning on the button  
illumination on the operation panel  
Note:  
4. Operate the JOYSTICK ¡ upward or  
downward, rightward or leftward and move the  
cursor to the character to be entered. Press  
the ENT at the center of the JOYSTICK ¡.  
When the cursor is at the lower/upper limit of  
the display, operate the JOYSTICK ¡ upward  
or downward, the character string of the  
following line appears.  
The following operation is enabled when the  
panel is open.  
The button illumination on the operation panel  
when the display is turned upward, can be  
switched between ONand OFF.  
ON: Button illumination on the operation  
panel turns on for 5 seconds;  
OFF: Button illumination is always on  
when the power is turned on;  
The factory default setting is OFF.  
1. When the panel is open, press the ADJ  
button * to show the adjustment selection  
display.  
-->:  
<--:  
--I--:  
Space  
Backspace  
Centering  
5. Repeat the step 4 to enter the complete title.  
6. Press and hold the ENT at the center of the  
JOYSTICK ¡ for 2 seconds or longer to store  
the title into memory and cancel title input mode.  
2. Operate the JOYSTICK ¡ upward or  
downward and select AUTO ILLto show  
ONand OFFin the menu bar.  
3. Operate the JOYSTICK ¡ rightward or  
leftward to select either position to be set  
and press the ENT at the center of the  
JOYSTICK ¡ for setting.  
Title list play  
You can display a list of titles, then select the disc  
or broadcast station to listen to from that list.  
You can not display a title list with the unit in  
Seek, Preset Scan, Auto store (Tuner, TV or  
DAB), Scan, Repeat or Random (CD changer)  
mode. Cancel those operation modes before to  
display a title list.  
4. Press the ADJ button * to return to the  
previous mode.  
To set ONagain, switch OFFto ON”  
manually.  
1. With the unit in radio, CD changer, TV or  
DAB mode, press the TITLE button (. A  
title list is displayed. The following functions  
can be carried out in a title list display.  
Entering titles  
Titles up to 10 characters long can be stored in  
memory and displayed for TV stations and CD  
changer. The numbers of titles that can be  
entered for each mode are as follows.  
TUNER: PS name (for RDS) of  
frequency stored in the presets 1 to 6 or  
frequency is displayed;  
Mode  
TV mode  
Number of titles  
DAB: Service label of a channel stored in  
the presets 1 to 6 is displayed. When there is  
not any service label, ---------is displayed.  
15 titles  
CD changer mode  
DCZ628 connected  
CDC655z connected  
CDC655Tz connected  
CDC1255z connected  
Number of titles  
100 titles  
CD changer: DISC titles for discs 1 to 6  
are displayed (By changing over a display  
page in case of 12-CD changer, disc 7 to 12  
can be displayed). When there is not any  
disc in a changer, ---------is displayed.  
60 titles  
100 titles  
50 titles  
You cannot enter titles with the unit in Seek,  
Preset Scan, Auto store (TV), Scan, Repeat or  
Random (CD changer) mode. Cancel each of  
those operations before entering titles.  
TV: A title of a channel stored in the presets  
1 to 6 or a channel number is displayed.  
2. Operate the JOYSTICK ¡ upward or  
downward to select one of the items 1 to 6.  
Press ENT at the center of the JOYSTICK  
¡ to reproduce the selected broadcast  
station or disc.  
1. Press the FNC button 1 to select the mode  
you want to enter a title (CD changer or  
TV).  
In case of 12-CD changer, move the cursor  
to disc 6 and then operate the JOYSTICK ¡  
downward to change over to a list display of  
discs 7 to 12.  
2. Select and play a CD in the CD changer or  
tune in to a TV station for which you want to  
enter the title.  
VRX653R  
39  
Other Functions  
3. Press the TITLE button ( again to return to  
Setting the car speaker output for  
the cellular phone  
the STANDARD display.  
The factory default setting is RIGHT.  
Cellular phone interrupt setting  
If you connect this unit and your cellular phone  
with a separately sold cable, you can listen to  
your telephone calls on your car speakers.  
To output the telephone calls, set the cellular  
phone interrupt to ON.  
1. Press the ADJ button * to switch to the  
adjustment selection display.  
2. Operate the JOYSTICK ¡ upward or  
downward to select TEL SP. LEFTand  
RIGHTare displayed in the menu bar.  
The factory default setting is OFF.  
1. Press the ADJ button * to switch to the  
adjustment selection display.  
LEFT:  
2. Operate the JOYSTICK ¡ upward or  
downward to select out of TEL SW, ON,  
OFF, and MUTE, which are displayed in  
the menu bar.  
Telephone calls can be heard on the left  
speaker connected to this unit.  
RIGHT:  
OFF:  
Telephone calls can be heard on the right  
speaker connected to this unit.  
This unit continues normal operation even  
when the cellular phone is used.  
Note:  
When the setting is OFF, disconnect the  
cellular phone from the cable or turn off the  
power of the cellular phone.  
3. Operate the JOYSTICK ¡ rightward or  
leftward to select a desired mode, and then  
press the ENT at the center of the  
JOYSTICK ¡ to set it.  
4. Press the ADJ button * again to return to  
ON:  
the STANDARD display.  
You can listen to your telephone calls from  
the speakers connected to this unit.  
When listening to your calls on your car  
speakers, you can adjust the volume by  
operating the VOLUME button 2.  
MUTE:  
The sound from this unit is muted during  
telephone calls.  
3. Operate the JOYSTICK ¡ rightward or  
leftward to select a desired mode, and then  
press the ENT at center of the JOYSTICK  
¡ to set it.  
4. Press the ADJ button * again to return to  
the STANDARD display.  
40  
VRX653R  
9. IN CASE OF DIFFICULTY  
Problem  
Cause  
Measure  
Replace with a fuse of the same amperage. If the  
fuse blows again, consult your store of purchase.  
Power does not  
turn on.  
(No sound is  
produced.)  
Fuse is blown.  
Consult your store of purchase.  
Incorrect wiring.  
Turn off the power, then press the RELEASE lever  
6 and remove the DCP.  
Press the RESET button for about 2 seconds with  
a thin rod.  
Nothing happens The microprocessor has  
when buttons are malfunctioned due to noise,  
pressed.  
etc.  
Display is not  
accurate.  
Wipe the dirt off with a soft cloth moistened with  
cleaning alcohol.  
DCP or main unit connectors  
are dirty.  
The remote controller does not work unless the  
display is open.  
The remote  
controller does  
not work.  
The display is not open.  
When direct rays of the sun fall on the light-  
receptive part of the remote controller, it may not  
work.  
Direct rays of the sun fall on  
the light-receptive part of the  
remote controller.  
Check the batteries of the remote controller unit.  
The batteries of the remote  
controller unit are dead or  
there is no battery in the  
remote controller unit.  
Check that the parking brake is applied.  
Adjust the brightness properly.  
The image is not The parking brake is not  
displayed.  
pulled.  
The display is  
dark.  
The brightness control is too  
low.  
The temperature inside the vehicle may be 0˚C or  
less. Set to an appropriate temperature (25˚C or  
so) and check it again.  
The operating condition is  
not good.  
The display is made dark at night to prevent the  
glare (When the headlight of the vehicle is lit in the  
daytime, the display gets dark).  
The headlight of the vehicle  
is lit.  
Check that COL and HUE are adjusted properly.  
The color of the  
display is light or  
a shade of color  
is not good.  
The color is not adjusted  
adequately.  
Set the NTSC/PAL properly according to the VTR.  
When the VTR is Improper NTSC/PAL setting  
connected, the  
image is  
disturbed.  
VRX653R  
41  
Problem  
Cause  
Measure  
When the TV tuner Bad receiving condition  
A radio wave may not reach sufficiently due to  
obstruction of mountains or buildings. Check it again  
at a place where a radio wave can be received  
properly.  
is connected, the  
image gets  
unclear.  
The TV tuner has Bad receiving condition  
a double or triple  
image.  
It may be under the influence of radio wave reflected  
by mountains or buildings. Check it again after  
changing place or direction.  
The TV tuner has Presence of jamming  
spots or stripes in  
the image.  
It may be under the influence from automobiles,  
streetcar, power cable, neon sign, and so forth.  
Check it again after changing place.  
There are red,  
green, and blue  
points in the  
display.  
This is not a failure, but a phenomenon peculiar to a  
liquid crystal panel (The LCD panel is produced  
according to technology with very high precision.  
Note that, though there are effective pixels of 99.99%  
or more, pixel missing or normally lit pixels account  
for 0.01%).  
42  
VRX653R  
10. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed. Take the measures described to eliminate  
the problem.  
Cause  
Error Display  
ERROR 2  
Measure  
A CD is caught inside the CD deck and is  
not ejected.  
This is a failure of CD decks mechanism  
and consult your store of purchase.  
ERROR 3  
ERROR 6  
ERROR 2  
ERROR 3  
ERROR 6  
A CD cannot be played due to scratches,  
etc.  
Replace with a non-scratched,  
non-warped-disc.  
A CD is loaded upside-down inside the CD Eject the disc then reload it properly.  
deck and does not play.  
A CD inside the CD changer is not loaded. This is a failure of CD changers mechanism  
and consult your store of purchase.  
A CD inside the CD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped-  
disc.  
A CD inside the CD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
If an error display other than the ones described above appears, press the RESET button. If the prob-  
lem persists, turn off the power and consult your store of purchase.  
For the DVD changer, refer to the Owners Manual provided with the DVD changer.  
VRX653R  
43  
11. SPECIFICATIONS  
FM (UKW) Tuner  
Frequency range:  
General  
Power source voltage:  
14.4 V DC (10.8 to 15.6 V allowable)  
Ground:  
87.5 MHz to 108 MHz (0.05 MHz steps)  
Negative  
AM Tuner  
Frequency range:  
Current consumption:  
4.0 A (1 W)  
MW: 531 kHz to 1602 kHz (9 kHz steps)  
LW: 153 kHz to 279 kHz (3 kHz steps)  
Auto Antenna Rated Current:  
500 mA less  
Dimensions of the Main Unit:  
178 mm Width × 50 mm Height × 157 mm  
Depth  
Audio Amplifier  
Rated power output:  
Weight of the Main Unit:  
1.7 kg  
17 W × 4 (20 Hz to 20 kHz, 1%, 4 )  
Maximum power output: 47 W × 4  
Speaker impedance: 4 Ω (4 to 8 )  
Dimensions of the Remote Control Unit:  
44 mm Width × 110 mm Height × 27 mm  
Depth  
Weight of the Remote Control Unit:  
30 g (including battery)  
Input  
RGB input:  
Video: 0.7 +/- 0.2 Vp-p (input impedance 75  
)  
Synchronize: 0.3 V (+0.9 / -0.1) Vp-p (input  
impedance: 75 )  
Video input:  
1.0 +/- 0.2 Vp-p (input impedance 75 )  
Output  
Audio output: min.200mVrms  
LCD Monitor  
Screen Size:  
6.5-inch wide type (146.7 mm Width ×  
79.1 mm Height)  
Notes:  
Specifications comply with EIAJ Standards.  
Specifications and design are subject to change  
without notice for further immprovement.  
Display method: Transmission type TN liquid  
crystal display  
Drive method: TFT (thin-film transistor) active  
matrix driving  
Pixels:  
336,960 (1440 × 234)  
44  
VRX653R  
VRX653R  
Installation and Wire connection manual  
Contents  
1. BEFORE STARTING................................................................ 45  
2. PACKAGE CONTENTS ........................................................... 45  
3. GENERAL CAUTIONS ............................................................ 46  
4. CAUTIONS ON INSTALLATION .............................................. 46  
5. INSTALLING THE MAIN UNIT................................................. 47  
6. REMOVING THE MAIN UNIT .................................................. 49  
7. CAUTIONS ON WIRING .......................................................... 49  
8. WIRE CONNECTION............................................................... 50  
9. SAMPLE SYSTEMS ................................................................ 52  
1.  
BEFORE STARTING  
1. This set is exclusively for use in cars with a  
negative ground 12 V power supply.  
2. Read these instructions carefully.  
3. Be sure to disconnect the battery “  
terminal before starting. This is to prevent  
short circuits during installation. (Figure 1)  
2.  
PACKAGE CONTENTS  
1 Main unit  
2 Manuals  
Owners manual & Installation manual  
Cord clamp  
Spacer  
Special screw  
6 Universal mounting bracket  
7 Remote control unit  
8 Battery  
Warranty card  
3 Power supply lead  
4
5
Bag for accessories of the main unit (No. 1)  
Flat head screw (M5 × 8)............................4  
Sems hexagonal bolt (M5 × 8)....................5  
Bag for accessories of the main unit (No. 2)  
Hook plate..................................................2  
(for remote control unit)  
9 Outer Escutcheon  
0 DCP Case  
VRX653R  
45  
3.  
GENERAL CAUTIONS  
1. Do not open the case. There are no user  
serviceable parts inside. If you drop  
anything into the unit during installation,  
consult your dealer or an authorized  
CLARION service centre.  
2. Use a soft, dry cloth to clean the case.  
Never use a rough cloth, thinner, benzine,  
or alcohol, etc. For tough dirt, apply a little  
cold or warm water to a soft cloth and wipe  
off the dirt gently.  
4.  
CAUTIONS ON INSTALLATION  
1. Prepare all articles necessary for installing  
the main unit before starting.  
5. Use the enclosed screws for installation.  
Using other screws can cause damage.  
2. This model is used with the LCD panel slid  
forwards (shell loading system). On some  
types of cars, the LCD panel may touch the  
dashboard or shift lever, in which case it  
cannot be installed. Check that the set will  
not hamper operation of the shift lever  
before choosing the place of  
(Figure 4)  
6. The source unit has mounting screw holes  
for NISSAN (N marks) and TOYOTA (T  
marks) vehicles.  
T
N
T
installation.(Figure 2)  
3. Install the unit within 30° of the horizontal  
N
T
N
plane. (Figure 3)  
4. If you have to do any work on the car body,  
such as drilling holes, consult your car  
dealer beforehand.  
46  
VRX653R  
5.  
INSTALLING THE MAIN UNIT  
Universal Mount  
1. Place the universal mounting bracket into  
the instrument panel, use a screwdriver to  
bend each stopper of the universal  
mounting bracket inward, then secure the  
stopper as shown in Figure 6.  
2. Wire as shown in Section 8.  
Notes:  
3. Insert the main unit into the universal  
mounting bracket until it locks.  
1) Some car models require special mounting  
kits for proper installation. Consult your  
Clarion dealer for details.  
2) Fasten the front stopper securely to prevent  
the main unit from coming loose.  
4. Mount the outer escutcheon so that all the  
hooks are locked.  
• Console opening dimensions  
Rear fastening hole (of vehicle)  
Instrument panel  
182 mm  
Hole  
Hole  
Stoppers  
Special Screw  
Screwdriver  
Rubber cap  
Universal mounting bracket  
Stoppers  
Main unit  
2-Spring  
Outer escutcheon  
Note:  
Set the outer escutch-  
eon so that its metallic  
part on the back side  
fits the upper edge of  
the main unit.  
VRX653R  
47  
Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles)  
This unit is designed for fixed installation in the  
dashboard.  
Repeat the same for the other side to  
remove the springs from the both sides.  
(Figure 7)  
If the vehicle is equipped with a factory-  
installed radio, install the main unit with the  
parts and screws marked (). (Figure 8)  
If the vehicle is not equipped with a factory-  
installed radio, obtain an installation kit to  
install the main unit in the following procedure.  
2. Secure the mounting brackets to the  
chassis as shown in Figure 8. Holes are  
pre-tapped for TOYOTA and NISSAN  
vehicles; modification, such as drilling new  
holes, of the mounting brackets may be  
required for other models.  
1. Remove the screws from both side of the  
main unit. Then, at either side, lift the leaf  
spring until the engaging claws are  
3. Wire as shown in Section 8.  
4. Secure the unit in the dashboard, and then  
reassemble the dashboard and the centre  
panel.  
released from the holes, and slide the  
spring to the direction of arrow to remove it.  
(M5x6)  
The screws with this mark are enclosed in  
this set.  
The parts and screws with this mark  
are used to install radio or included in  
the installation kit.  
Note 1: In some cases, the centre panel may  
require some modification (trimming,  
filling, etc.).  
Note 2: If a hook on the installation bracket  
interferes with the unit, bend and flatten it  
with a nipper or a similar tool.  
48  
VRX653R  
6.  
REMOVING THE MAIN UNIT  
B
A
of the spring into hole  
of the hook  
1. When the rear of the main unit has been  
secured with the method shown in Figure 6  
unfasten the special screw.  
plate, then pull the main unit out by the  
hook plate. (Insert both the right and left  
edges of the hook plate.) (Figure 9)  
2. Remove the outer escutcheon.  
3. Insert the hook plate between the spring  
and the universal mounting bracket, fit tab  
Note: Keep the hook plate. You cannot remove  
the main unit without disengaging the hook  
plate.  
7.  
CAUTIONS ON WIRING  
1. Be sure to turn the power off before wiring.  
2. Be particularly careful where you route the  
wires.  
Keep them well away from the engine, and  
exhaust pipe, etc. Heat may damage the  
wires.  
3. If the fuse should blow, check to see if the  
wiring is correct.  
If it is, replace the fuse with a new one with  
the same amperage rating as the original.  
4. When any fuse is to be replaced, pull out  
the fuse (15A) at the rear of the main unit  
and put in a new one (Fig.10).  
Figure 10  
CAUTION  
After the connection, fix the lead by a clamp  
or insulation tape for protection.  
VRX653R  
49  
8.  
WIRE CONNECTION  
Rear view of the Main unit  
Red  
5  
1
Front right  
Front left  
Gray  
Gray  
2
White  
5  
!
0
3
Red  
4  
4
Rear right  
Rear left  
Brack  
Brack  
White  
B-2  
B-3  
B-5  
B-1  
B-4  
B-6  
9
5
6
B-7  
B-8  
A-7  
A-8  
1  
3  
7
A-5  
A-6  
A-4  
@
2  
2  
8
No.  
B-1  
B-2  
B-3  
B-4  
B-5  
B-6  
B-7  
B-8  
A-4  
A-5  
A-6  
A-7  
A-8  
Description  
No.  
1
2
3
4
5
6
7
8
9
0
Description  
NAVI/CCD terminal  
RGB INPUT  
VIDEO INPUT (for TV tuner)  
Radio antenna jack (4)  
CeNET terminal  
-
+
REAR RIGHT  
REAR RIGHT  
-
FRONT RIGHT  
FRONT RIGHT  
+
-
FRONT LEFT  
FRONT LEFT  
REAR LEFT  
REAR LEFT  
+
Fuse (15A)  
-
Phone mute (Brown)  
Spare terminal (Yellow)  
ISO CONNECTOR  
AUDIO 4CH. OUTPUT  
DVD/etc. INPUT  
+
+12 V MAIN POWER (2)  
AUTO ANTENNA (1)  
ILLUMINATION  
+12 V ACCESSORY (2)  
GROUND  
!
@
(for DVD changer and etc.)  
Parking brake (Bright Green)  
1:When the unit is installed in a 1998 or later Volkswagen model, make sure to interrupt the  
<<Remote>> output. Disconnect the <<blue/white>> wire and insulate the front ends of this lead.  
A breakdown may occur if the lead is not disconnected, or front ends are not insulated.  
2:In certain vehicles - Volkswagen/Opel/Vauxhall - it is necessary to exchange the accessory  
<<Red>> and the main power <<Yellow>> connection, to avoid overload and loss of memory.  
3:Connecting the PHONE MUTE Terminal  
The lead included with the unit must be connected to the specified position of the vehicles ISO  
connector in order to use the triggered audio mute for cellular telephonesfunction.  
4:Use the attached extension lead when necessary.  
5:When connecting CCD CAMERA, be sure to connect RCA as well as the 8-pin Mini-Din video jack.  
Note : Before making any installation, disconnect the car battery - (negative) cable.  
50  
VRX653R  
Connecting the Accessories  
Connection to the CCD camera for vehicle  
The CCD CAMERA for vehicle can be connected to the system expansion terminal on the main  
unit. For detailed information, refer to the instruction sheet or manual for the CCD CAMERA.  
Notes:  
• A power supply box (sold separately) is required for connection of the main unit and the CCD  
CAMERA.  
• While the CCD CAMERA is used, the navigation cannot be turned on.  
• The power supply box for camera CCA-147 cannot be used. Please use The CCA-188 instead.  
Connection to car navigation equipment  
When Clarion car navigation equipment is used, connect it to the system expansion terminal  
(CCD/NAVI) and the RGB terminal of the main unit. For detailed information, refer to the  
operating instructions provided with car navigation equipment. When the NAVI is connected, the  
CCD camera cannot be connected. When the Clarion NAVI is to be connected, set the INPUT to  
the NAVI position.  
If the specified lead of the cellular phone is connected to the phone mute  
lead of the source unit, the audio mute is available when the cellular  
telephone is used.  
For audio mute setting in cellular telephone use, see page 40.  
DAB (Digital Audio Broadcasting)  
When the DAB is to be connected, use the Ce NET connector. For detailed information, refer to  
the instruction manual of the DAB.  
For DAB connection, the DAH9500Z cannot be connected.  
TV Tunner  
When the TV TUNER is to be connected, connect the Ce NET connector and RCA PIN (yellow).  
For detailed information, refer to the instruction manual of the TV TUNER.  
Parking brake lamp  
Connecting the parking brake lead  
Connect the lead to parking brake lamp earth  
+ lead to battery  
in the meter panel.  
Connect these three leads.  
Notes:  
- cord  
• Connecting the parking brake lead to lamp earth  
allows you to watch TV/VTR/DVD changer when  
the parking brake is engaged.  
• When the parking brake lead is not connected,  
the monitor will stay off.  
parking  
brake signal  
lead  
Parking brake lead  
(bright green)  
Parking brake  
VRX653R  
51  
9.  
SAMPLE SYSTEMS  
Sample System 1  
Main Unit  
Amp remote  
RCA PIN cable  
(Sold separately)  
Front  
Speakers  
Amp.  
Rear  
Speakers  
DVD/etc. INPUT  
VIDEO INPUT  
RCA video cable  
(included the VCZ628)  
Mini DIN(8P) Cable  
(included the  
NAX943DV)  
CeNET cable  
(included the TV tuner)  
RCA video cable  
(included the TV tuner)  
RGB cable  
(included the  
NAX943DV)  
TV Tuner  
(TTX7502z/  
TTX7503z)  
Navigation System  
(NAX943DV)  
CeNET Cable  
(included the DAB tuner)  
To enable the correct input, it is necessary  
to configure the VRX653R as described on  
page 37.  
When connected to the NAX 9500E, use the  
CCA-647 (sold separately).  
RDI OUT  
DAB Tuner  
(DAH913/DAH923)  
RDS TMS Tuner  
CeNET Cable  
(included the Changer)  
(TMH943)  
Ferrite clamp  
(Included the DVD changer)  
CeNET Y-adapter  
(CCA-519-601,  
sold separately)  
DVD Changer  
(VCZ628)  
CD Changer  
(CDC655z/655Tz/1255z/  
DCZ628)  
Set the [CeNET/STAND ALONE]  
When two CD changers are  
connected, CCA-519-601 is  
required.  
switch to the [CeNET] position.  
STAND  
CeNET  
ALONE  
52  
VRX653R  
Sample System 2  
Main Unit  
(VRX653R)  
Amp remote  
RCA PIN cable  
(Sold separately)  
Front  
Speakers  
Amp.  
Rear  
Speakers  
DVD/etc. INPUT  
VIDEO INPUT  
RCA video cable  
(included the VCZ628)  
Mini DIN(8P) Cable  
(included the  
NAX943DV)  
CeNET cable  
(included the  
TV tuner)  
RCA video cable  
(included  
the TV tuner)  
Rear  
RGB cable  
Monitor  
(included the  
NAX943DV)  
TV Tuner  
RCA video cable (sold separately)  
(TTX7502z/  
TTX7503z)  
AV Adapter cable  
(CCA-389, sold separately)  
Navigation System  
(NAX943DV)  
CeNET Cable  
(included the DAB tuner)  
To enable the correct input, it is  
necessary to configure the VRX653R  
as described on page 37.  
The rear monitor displays TV/VTR  
images only. Images from the DVD  
changer cannot be displayed.  
RDI OUT  
DAB Tuner  
(DAH913/  
DAH923)  
VTR  
RDS TMS Tuner  
CeNET Cable  
(included the Changer)  
(TMH943)  
Ferrite clamp  
(Included the DVD changer)  
CeNET Y-adapter  
(CCA-519-601,  
sold separately)  
DVD Changer  
(VCZ628)  
CD Changer  
(CDC655z/655Tz/1255z/  
DCZ628)  
Set the [CeNET/STAND ALONE]  
When two CD changers are  
connected, CCA-519-601 is  
required.  
switch to the [CeNET] position.  
STAND  
CeNET  
ALONE  
VRX653R  
53  
Sample System 3  
Main Unit  
(VRX653R)  
Amp remote  
RCA PIN cable  
(Sold separately)  
Front  
Speakers  
Amp.  
Rear  
Speakers  
VIDEO INPUT  
DVD/etc. INPUT  
CeNET cable  
(included the TV tuner)  
RCA video cable  
(included the TV tuner)  
Mini DIN(8P) Cable  
(included the  
CCD camera)  
TV Tuner  
(TTX7502z/  
TTX7503z)  
RCA video cable  
(included the CCD camera)  
CeNET Cable  
(included the DAB tuner)  
CCD camera  
To enable the correct input,  
it is necessary to configure  
the VRX653R as described  
on page 37.  
RDI OUT  
DAB Tuner  
(DAH913/DAH923)  
CD Changer  
CeNET Cable  
(included the Changer)  
(CDC655z/655Tz/1255z/  
DCZ628)  
54  
VRX653R  

Motorola 68000202880 C User Manual
Maxtor Computer Drive User Manual
LG Electronics GT360 User Manual
LG Electronics Green Rumor User Manual
JVC UX MD9000R User Manual
JVC KD R35 User Manual
JVC KD G331 User Manual
iLive ic638B User Manual
HTC Touch Diamond 080716 User Manual
Honeywell TE219ELW User Manual