MA0506-EA
Operation Guide DQ-970
ILLUSTRATION
GENERAL GUIDE
1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about five seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
INVALID
RESET
OFF: Alarm off
3 + / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
4 °C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
5 SET button
Use this button when setting the current time.
6 RESET button
Press this button to reset the clock after replacing its batteries.
• Buttons marked “INVALID” have no function.
°C/°F
SET
INVALID
RESET
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
Normal Timekeeping Screen
°C/°F
SET
Year Setting Screen
Month and Day
Setting Screen
Time Setting Screen
12-hour/24-hour
Timekeeping Screen
2. While the screen you want is displayed, use the + and – buttons (3) to change the flashing digits.
• Holding down + or – changes the flashing digits at high speed.
• You can set the year in the range of 2000 to 2039. The day of
the week is set automatically in accordance with the date
setting.
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
–
+
• Pressing + or – while the Time Setting Screen is on the display
Press to
Press to
clock.
causes the seconds count to be reset to 00.
decrease
the flashing
digits.
increase
the flashing
digits.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
°C/°F
SET
• Each press of + or – while the 12-hour/24-hour Timekeeping
Screen is on the display toggles between 12-hour and 24-hour
timekeeping.
Alarm Off
Snooze Alarm On
Snooze on
indicator
Alarm time
PM
indicator
Date
(month - day)
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
Day of the week
Current time
(Hour, minutes,
seconds)
Alarm on
indicator
Current
temperature
Current
humidity
1
|