Compact disc player
User’s manual
2
azur
350C
Your music + our passion
azur 350C
Important safety instructions
For your own safety please read the following important safety
instructions carefully before attempting to connect this unit to the mains
power supply. They will also enable you to get the best performance from
and prolong the life of the unit:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
The lightning flash with the arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of un-insulated
‘dangerous voltage’ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
4. Follow all instructions.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
instructions in the service literature relevant to this appliance.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
WEEE symbol
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
The crossed-out wheeled bin is the European Union symbol for
indicating separate collection for electrical and electronic
equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please return the
unit or contact the authorised dealer from whom you purchased this
product for more information.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
CE mark
This product complies with the European Low Voltage
(2006/95/EC), Electromagnetic Compatibility (2004/108/EC)
and Environmentally-friendly design of Energy-using Products
(2005/32/EC) Directives when used and installed according to this
instruction manual. For continued compliance only Cambridge Audio
accessories should be used with this product and servicing must be
referred to qualified service personnel.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use with only the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
C-Tick mark
This product meets the Australian Communications Authority’s
Radio communications and EMC requirements.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
Ross Test Stamp
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the
power-supply cord or plug having been damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has
been dropped.
This product meets Russian electronic safety approvals.
FCC regulations
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY
TO OPERATE THE EQUIPMENT.
WARNING
– To reduce the risk of fire or electric shock, do not expose this unit to
rain or moisture.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
– Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
The unit is of Class 1 construction and must be connected to a mains
socket outlet with a protective earthing connection.
The unit must be installed in a manner that makes disconnection of the
mains plug from the mains socket outlet (or appliance connector from
the rear of the unit) possible. Where the mains plug is used as the
disconnect device, the disconnect device shall remain readily operable.
Only use the mains cord supplied with this unit.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
– Re-orient or relocate the receiving antenna.
Please ensure there is ample ventilation (at least 10cm clearance all
round). Do not put any objects on top of this unit. Do not situate it on a
rug or other soft surface and do not obstruct any air inlets or outlet grilles.
Do not cover the ventilation grilles with items such as newspapers,
tablecloths, curtains, etc.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
This unit must not be used near water or exposed to dripping or splashing
water or other liquids. No objects filled with liquid, such as vases, shall be
placed on the unit.
– Consult the dealer or an experienced radio/TV technician for help.
3
Limited warranty
Cambridge Audio warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth below).
Cambridge Audio will repair or replace (at Cambridge Audio's option) this
product or any defective parts in this product. Warranty periods may vary
from country to country. If in doubt consult your dealer and ensure that
you retain proof of purchase.
Ventilation
IMPORTANT – The unit will become hot when in use. Do not stack multiple
units on top of each other. Do not place in an enclosed area such as a
bookcase or in a cabinet without sufficient ventilation.
Ensure that small objects do not fall through any ventilation grille. If this
happens, switch off immediately, disconnect from the mains supply and
contact your dealer for advice.
To obtain warranty service, please contact the Cambridge Audio
authorised dealer from which you purchased this product. If your dealer
is not equipped to perform the repair of your Cambridge Audio product,
it can be returned by your dealer to Cambridge Audio or an authorised
Cambridge Audio service agent. You will need to ship this product in either
its original packaging or packaging affording an equal degree of
protection.
Positioning
Choose the installation location carefully. Avoid placing it in direct sunlight
or close to a source of heat. No naked flame sources, such as lighted
candles, should be placed on the unit. Also avoid locations subject to
vibration and excessive dust, cold or moisture. The unit can be used in a
moderate climate.
Proof of purchase in the form of a bill of sale or receipted invoice, which
is evidence that this product is within the warranty period, must be
presented to obtain warranty service.
This unit must be installed on a sturdy, level surface. Do not place in a
sealed area such as a bookcase or in a cabinet. Do not place the unit on
an unstable surface or shelf. The unit may fall, causing serious injury to
a child or adult as well as serious damage to the product. Do not place
other equipment on top of the unit.
This Warranty is invalid if (a) the factory-applied serial number has been
altered or removed from this product or (b) this product was not
purchased from a Cambridge Audio authorised dealer. You may call
Cambridge Audio or your local country Cambridge Audio distributor to
confirm that you have an unaltered serial number and/or you made a
purchase from a Cambridge Audio authorised dealer.
Due to stray magnetic fields, turntables or CRT TVs should not be located
nearby due to possible interference.
This Warranty does not cover cosmetic damage or damage due to acts of
God, accident, misuse, abuse, negligence, commercial use, or
modification of, or to any part of, the product. This Warranty does not
cover damage due to improper operation, maintenance or installation, or
attempted repair by anyone other than Cambridge Audio or a Cambridge
Audio dealer, or authorised service agent which is authorised to do
Cambridge Audio warranty work. Any unauthorised repairs will void this
Warranty. This Warranty does not cover products sold AS IS or WITH ALL
FAULTS.
Electronic audio components have a running in period of around a week
(if used several hours per day). This will allow the new components to
settle down and the sonic properties will improve over this time.
Power sources
The unit should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power-supply to
your home, consult your product dealer or local power company.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE
THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED
WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL
PURPOSE.
This unit can be left in Standby mode when not in use and will draw <1W
in this state. To turn the unit off, switch off at the rear panel. If you do not
intend to use this unit for a long period of time, unplug it from the mains
socket.
Overloading
Do not overload wall outlets or extension cords as this can result in a risk
of fire or electric shock. Overloaded AC outlets, extension cords, frayed
power cords, damaged or cracked wire insulation and broken plugs are
dangerous. They may result in a shock or fire hazard.
Some countries and US states do not allow the exclusion or limitation of
incidental or consequential damages or implied warranties so the above
exclusions may not apply to you. This Warranty gives you specific legal
rights, and you may have other statutory rights, which vary from state to
state or country to country.
Be sure to insert each power cord securely. To prevent hum and noise, do
not bundle the interconnect leads with the power cord or speaker leads.
Cleaning
For any service, in or out of warranty, please contact your dealer.
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any
cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an
aerosol at or near the unit.
Plug-fitting Instructions (UK only)
Battery disposal
The cord supplied with this appliance is factory-fitted with a UK mains plug fitted with
a 3-amp fuse inside. If it is necessary to change the fuse, it is important that a
3-amp fuse is used. If the plug needs to be changed because it is not suitable for
your socket, or becomes damaged, it should be cut off and an appropriate plug
fitted following the wiring instructions below. The plug must then be disposed of
safely, as insertion into a mains socket is likely to cause an electrical hazard. Should
it be necessary to fit a 3-pin BS mains plug to the power cord, the wires should be
fitted as shown in this diagram. The colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings identifying the terminals
in your plug. Connect them as follows:
Please dispose of any discharged batteries according to local
environmental/electronic waste disposal guidelines.
Loudspeakers
Before making any connections to loudspeakers, make sure all power is
turned off and only use suitable interconnects.
Servicing
The wire which is coloured BLUE must be
connected to the terminal which is marked with
the letter ‘N’ or coloured BLACK.
These units are not user serviceable. Never attempt to repair,
disassemble or reconstruct the unit if there seems to be a problem.
A serious electric shock could result if this precautionary measure is
ignored. In the event of a problem or failure, please contact your dealer.
The wire which is coloured BROWN must be
connected to the terminal which is marked with
the letter ‘L’ or coloured RED.
The wire which is coloured GREEN/YELLOW must
be connected to the terminal which is marked
with the letter ‘E’ or coloured GREEN.
If a standard 13-amp (BS 1363) plug is used, a 3-amp fuse must be fitted or, if any
other type of plug is used, a 3-amp or 5-amp fuse must be fitted, either in the plug
or adaptor, or on the distribution board.
4
azur 350C
Rear panel connections
2
1
4
5
3
1
AC power socket
Once you have completed all connections to the amplifier, plug the AC
power cable into an appropriate mains socket and turn the unit on. Your
compact disc player is now ready for use.
2
Power On/Off
Switches the unit on and off.
3
Line Output
Use good quality interconnect cables from these sockets to any line level
input on your amplifier.
4
S/P DIF co-axial digital output
*
For input to a separate DAC, such as Cambridge Audio’s own DacMagic ,
or a digital recording machine. To obtain best results, use a high quality
75ohm digital RCA interconnect cable (not one designed for normal audio
use).
5
TOSLINK Optical digital output
*
Use to connect to the input of a separate DAC or digital recording
machine. Use a high quality TOSLINK fibre optic interconnect cable.
Note: To obtain the best results from your system we recommend using
only high quality Cambridge Audio interconnects. This will ensure that you
hear your system as we designed it. Please ask you dealer for details.
* For more information, see the DacMagic page on the Cambridge Audio website:
5
Front panel controls
1
2
3
4
5
6
1
Standby/On
Display functions
Switches the unit between On and Standby mode. The blue LED will
remain bright when the unit is on, becoming dim when the unit is in a
special eco-friendly standby mode. The unit consumes less than one watt
of power during standby. The unit can remain in Standby mode when not
in use. It is advisable to switch the unit off at the mains if it is not likely
to be used for an extended period of time.
3
1
2
4
5
6
Note: For convenience, the player can be programmed to automatically
enter Standby mode after a period of inactivity. To enable this feature,
see “Using the set-up menu” on page 9.
1
Play
2
Infrared sensor
Illuminated during disc playback.
Receives IR commands from the supplied remote control. A clear,
unobstructed line of sight between the remote control and the sensor is
required.
2
Pause
Indicates that disc playback has been paused.
3
Open/Close
3
Display
Allows you to open and close the disc tray. After placing a CD in the tray,
press Open/Close to close the tray.
Alpha-numeric characters which display playback information. On inserting
a disc, the CD player will take a few seconds to read the Table of Contents
(TOC) information from the disc. The display will then show the number of
tracks on the CD and the total length of the CD.
4
Play/Pause
Plays the disc and pauses play.
If the CD incorporates CD-text, the name of the album will scroll once
(the number of tracks remains stationary throughout). Once playback of
an individual track begins, the track number, total number of tracks and
play-time will be displayed. On a CD containing CD-text, the track name
5
Stop
Stops the CD playing.
will scroll once. Pressing the
re-display the CD-text.
(Info) button on the remote control will
6
Skip/Scan
Enables you to skip between and search within tracks. Press briefly to
skip a track. Press and hold to scan through a track.
4
Random
Indicates random playback mode.
5
Remain
Illuminated when displaying time remaining on track or disc.
6
Repeat All/Track
Illuminated when ‘Repeat Track’ or ‘Repeat All’ is selected.
6
azur 350C
Remote control
The 350C is supplied with an Azur Navigator remote
control that operates both this CD player and Cambridge
Audio Azur range amplifiers. Insert the supplied AAA
batteries to activate. Always use alkaline-type batteries.
Volume controls
Increases or decreases the volume of the amplifier
output.
,
,
,
,
,
Standby/On
Switches the 350C between On and low power eco-
friendly Standby mode.
The six source select buttons are used to directly select
the input source to the amplifier.
Note: the Tape Monitor input works in a slightly different
way – please refer to your amplifier user’s manual for
details.
Open/Close
Opens and closes the disc tray.
Numerical track select
Press the number of the desired track. The track will
then play automatically from the start of the track.
iPod compatibility
The Azur 350AC Navigator remote control can control
the basic functions of Apple iPods when mounted in
Cambridge Audio iPod dock or Apple’s Universal Dock.
Refer to your dock’s instruction manual on how to
connect it to your amplifier.
Track select
To select a track number greater than nine, press -/--
followed by the track number. Playback of the chosen
track starts automatically.
To use the Azur remote to control the docked iPod, hold
MP3x’ button whilst pressing one of the
down the ‘A
following buttons:
Play/
Stop/
Pause
Press the relevant button to play, stop or pause the CD.
Play/Pause
Press to play the iPod, press again to pause play.
Skip
Right Skip Press to skip forward by one track on the
Skip
CD.
Press once to skip forwards or backwards one track.
Left Skip Press to skip backward by one track on the
MP3
CD.
Release the ‘Ax’ button to return the remote control to
normal functionality.
Scan
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
Press and hold to scan within the selected track. Hold
down for seven seconds to increase scan speed. Press
the right button to fast forward, the left button to rewind.
Info
Used with CDs that support CD-text. In stop mode, press
to toggle between album name and total time on the
display. During playback, press to toggle between track
name and track time.
Bright
Alters the brightness of the display backlight. There are
three levels of brightness: Bright, Dim and Off.
,
,
,
Read the ‘Operating Instructions’ section of this manual
for information on the functions of these buttons.
Note: these buttons will function only when the display
backlight is in either ‘Bright’ or ‘Dim’ modes. If it is set to
‘Off’, the functions do not respond.
Please note that the following buttons will only operate a matching
Cambridge Audio Azur amplifier:
Mute
Mutes the audio on the amplifier. The mute mode is indicated by the
source and speaker LEDs flashing. Press again to cancel mute.
Note: The speaker outputs, Pre-out and headphone outputs will all be
muted. The Record outputs are unaffected.
7
Operating instructions
3. To repeat a specific track, press Repeat twice while the track is
playing. ‘Repeat Track’ will appear on the display. Press Play and the
selected track will now repeat until the function is turned off.
Loading and unloading discs
1. Press the Open/Close button.
2. When the disc tray has opened fully, place a disc carefully in the tray
with the label side facing up.
3. To close the disc tray, press the Open/Close button again. When the
tray, with a correctly loaded disc, is fully closed the CD player will read
the disc and display the content information.
4. The disc tray can be opened at any time by pressing the Open/Close
button. Only remove the disc after the tray has fully opened.
Alternatively, press Repeat twice, select the chosen track using the
numerical buttons on the remote control and press Play.
4. Press Repeat again either before or during playback to turn off the
repeat function.
Note:
–
Do not put anything except a compact disc into the tray. Foreign
objects may damage the mechanism.
–
–
Do not force the tray by hand during the opening and closing operations.
To avoid dirt and dust entering the mechanism, keep the disc tray
closed.
If the compact disc is badly scratched or too dirty, the player may not
be able to read it or play it.
Note:
–
–
‘Repeat Track’ is not available in Program mode.
Selecting ‘Repeat Track’ when ‘Random’ mode has been selected
will automatically cancel ‘Random’ mode.
–
–
Never load more than one disc into the disc tray at any time.
Playing tracks in random order
1. Ensure that a disc is loaded.
Normal disc play
2. Press the Random button on the remote control. ‘Random’ will
This unit has been designed to play compact discs,
recordable CDs (CD-R) and re-writable CDs (CD-RW) bearing
the identification logo shown here. No other discs can be
appear on the display.
3. Press Play. The CD player will now play the entire disc in random
order.
used. Any CD-R/CD-RW discs should contain properly recorded TOC (Table
of Contents) information so that they can be played back. This unit can
play only the discs recorded in the CD-DA format designed for music
reproduction. Do not attempt to play a disc containing other data, such as
a CD-ROM for PCs with mp3 or WMA files, on this unit.
1. Switch on your amplifier and set its input selector to the correct
position. Adjust the volume control to a minimum.
2. Press the Open/Close button to open the disc tray and load a disc.
3. Press the Open/Close button again to close the tray. The CD player
will read the disc.
4. To begin playback, press Play.
5. When the last track has finished playing, the display will return to
Table of Contents (TOC).
6. To stop the disc at any point, press the Stop button. Pressing the
Pause button while the disc is playing will pause the disc and
illuminate the pause icon on the display. Playback can be resumed
by pressing Play again.
It is also possible to press the Random button during playback to
listen to tracks in random order.
4. Press Random to exit the Random function. The disc will continue
playing to the end in the correct order.
5. Press the Stop button at any time to stop the disc.
Note: Selecting ‘Random’ mode when ‘Repeat Track’ has been selected
will automatically cancel ‘Repeat Track’ mode.
Locating a specific track during playback
1. A single short press of the Skip/Scan > button will take you to the
beginning of the next track on the CD. Repeat as necessary.
2. A single short press of the Skip/Scan < button will take you to the
beginning of the previous track.
Using the Remain function
1. Ensure that the disc is playing.
2. Press the Remain button on the remote control once to display the
time remaining for the track playing.
Locating a specific track when playback is stopped
1. A single short press of the Skip/Scan > button will skip between tracks.
2. Press and hold to scroll rapidly through tracks.
3. Press Play to start playback from the selected track.
Repeating discs and tracks
1. Ensure that the disc is loaded.
3. Press Remain a second time to show the total remaining disc time.
2. Press the Repeat button on the remote control. ‘Repeat All’ will
appear on the display. Press Play. The whole disc will now be repeated
until the function is turned off.
4. Press Remain again either before or during playback to return to
normal play mode.
8
azur 350C
10. Pressing ꢀduring playback will take you back to the ‘Program Mode’
Programming disc play
It is possible to program the 350C to play back in any order only the tracks
you wish to listen to.
stage. Pressing ꢀ again at this point deletes the program.
Note:
–
During programmed playback, it is possible to use the ‘Remain’
function only to show the time remaining on the track playing. You
can not view the time remaining on the disc.
1. Ensure that a disc is loaded. The display should show the TOC data.
2. Press Program on the remote control. The Program set-up will appear
in the display (as long as the display backlight is set to ‘Bright’ or
‘Dim’ modes). ‘ST:01’ will flash.
–
Only the ‘Repeat All’ feature can be used during Program mode. You
are not able to repeat specific tracks in the program.
Using the set-up menu
The 350C allow the setting of some options related to Auto Play and Auto
Power Down.
3. Using the ꢁ ꢂ , 0-9 or -/-- buttons, skip to or enter the track number
1. Press and hold Stop for five seconds to open the set-up menu.
2. Scroll through the menu (shown below) using the Skip/Scan < >
buttons.
that you want to program as your first track.
3. Play/Pause selects a sub-menu. Scroll through sub-menu options
with the Skip/Scan < > buttons. The default setting is indicated by
the symbol ꢀ.
4. Select an option by pressing Play/Pause.
5. Return to the sub-menu or exit the options menu by pressing the Stop
button.
4. Press ꢃ . The desired track is now programmed. The program number
automatically increases by one for the next entry.
Note:
–
–
It is not possible to access the set-up menu during disc playback.
The Stop button on the remote control cannot be used to open the
set-up menu. Once you have accessed the menu, however, the
remote control can be used to scroll through and select sub-menu
options.
5. Repeat steps three and four until all your desired tracks are entered.
A maximum of 30 tracks can be programmed.
6. To go back and change a programmed track, press ꢄ ꢅ to locate the
desired program step. ‘ST:0-’ does not flash.
Press Stop for 5 seconds
Auto Play
Auto Power Down
Press ꢁ ꢂ to choose the replacement track. ‘ST:0-’ flashes to
indicate a change of program. Press ꢃ to select the new track and
continue.
ꢀ
ꢀ
Off
On
Off
5min
10min
15min
7. Press Program or ꢀ to exit.
Auto Play Setting
If required the 350C can automatically play disks inserted into the drawer
without the Play button having to be pressed. Auto Play is simply enabled
in the menu when desired. The default setting for Auto Play is ‘Off’.
Auto Power Down Setting
Press Program again to return to program editing. At this point you
can either press ꢀ again to delete the program and return to TOC
display, or press ꢃ to start playing your selection.
If desired the 350C can shut itself down if not used for a period of time.
Power down after an inactive period (no disk playback or any functions of
the player used) of 5, 10 or 15 minutes can be selected. The default
setting for Auto Power Down is ‘Off’ (i.e. disabled).
8. When ꢃ is pressed, ‘Program Play’ appears briefly on the display and
playback of the programmed tracks commences.
9. You can use the skip and scan functions on your remote control to
move through your programmed selection in the same way as normal
playback.
9
Technical specifications
Troubleshooting
D/A Converter
Wolfson Microelectronics WM8728
24-Bit/192kHz capable
There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check the unit is switched on at the rear panel.
Check fuse in the mains plug or adaptor.
Filter
2-Pole Sallen-Key Butterworth filter
Frequency response (+/-0.2dB) 20Hz - 20kHz
THD @ 1Khz 0dBFs
IMD (19/20kHz) 0dBFs
Linearity @ -90dBFs
Stopband rejection (>24kHz)
S/N ratio, A weighted
Total correlated jitter
Crosstalk @1kHz
<0.003%
<0.001%
+/- 0.5dB
>90dB
The player will not read the disc
Check the disc is not loaded upside down.
Check that the disc is not too scratched or dirty.
>99dB
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
<250pS
<-90dB
Crosstalk @20kHz
<-80dB
The disc is skipping
Check that the disc is not too scratched or dirty.
Output impedance
<50ohms
Ensure the player is on a firm surface and not subject to vibrations.
Maximum power consumption 25W
Standby power consumption
Dimensions
<1W
There is a hum coming from the speaker
Ensure that all cable connections are secure.
85 x 430 x 305mm
(3.4 x 16.9 x 12.2”)
The remote handset will not function
Check that the batteries have not expired.
Weight
4.8kg (10.6lbs)
Ensure that nothing is blocking the remote sensor.
In the event that the above solutions do not remedy your problem, please
consult our frequently asked questions (FAQ) section on our website:
You can also use this facility to post a question to our Technical Support
team.
For all servicing, in or out of warranty, please contact your dealer.
10
azur 350C
11
Cambridge Audio is a brand of Audio Partnership Plc
Registered Office: Gallery Court, Hankey Place
London SE1 4BB, United Kingdom
Registered in England No. 2953313
© 2010 Cambridge Audio Ltd
|