GSM 908
User Guide
GB
IMPORTANT NOTICE
SIM card limitations
Network operators offer different kinds of services
and different kinds of SIM cards. Please contact
your network operator for further details.
Depending on your type of SIM card some fea-
tures described in this user guide may not be
available to you or may not be operated in the way
described. Where a feature relates to the network
you will see this symbol
in the user guide.
The memory capacity of your SIM card may differ
from one type of card to another.
Batteries
Never dispose of old batteries in your household
refuse. Return them to the place of purchase or
take them to a recycling centre so that they may
be disposed of in an environmentally friendly
manner.
Accessories
The use of other types of chargers, batteries or
any accessories other than those recommended
for use with this telephone will invalidate any
approval given to this apparatus as well as the
manufacturer’s warranty on the telephone.
Care of your phone
Do not try to open the phone as this might
damage vital parts. The phone contains no com-
ponents which can be repaired by the user. Any
repair requires expertise and should be carried
out only by an authorized service centre.
To clean your phone, wipe over with a soft cloth.
Do not use alcohol or other solvents as these will
harm your phone.
Do not use your mobile phone in high humidity
environments or where the temperature falls
below -10˚ or exceeds +55˚ C.
4
CONTENTS
Precautions . . . . . . . . . . . . . . . . Page
Important notice . . . . . . . . . . . Page
Keypad functions . . . . . . . . . . . Page
Display symbols . . . . . . . . . . . . Page
Before you start . . . . . . . . . . . . Page
3
4
6
7
8
Tones setup . . . . . . . . . . . . . . . . Page 31
Phone setup . . . . . . . . . . . . . . . . Page 32
Message setup . . . . . . . . . . . . . . Page 34
Phone book setup . . . . . . . . . . Page 35
Call timers and charge . . . . . . Page 35
Security . . . . . . . . . . . . . . . . . . . . Page 36
Calculator . . . . . . . . . . . . . . . . . . Page 38
Accessories . . . . . . . . . . . . . . . . Page 39
Index . . . . . . . . . . . . . . . . . . . . . . . Page 44
Making your first call . . . . . . . Page 10
Options
when in conversation . . . . . . Page 12
Phone book . . . . . . . . . . . . . . . . Page 14
Phone book editing . . . . . . . . Page 15
Alternative phone books . . . Page 17
List menu system . . . . . . . . . . . Page 18
Outgoing calls . . . . . . . . . . . . . Page 19
Answered calls . . . . . . . . . . . . . Page 19
Missed calls . . . . . . . . . . . . . . . . Page 20
Messages . . . . . . . . . . . . . . . . . . . Page 21
Setup menu system . . . . . . . . . Page 24
Call divert . . . . . . . . . . . . . . . . . . Page 26
Call barring . . . . . . . . . . . . . . . . Page 28
Call waiting . . . . . . . . . . . . . . . . Page 29
Supplementary
network services . . . . . . . . . . . Page 30
5
KEYPAD FUNCTIONS
LED (Status indicator)
Earphone
Slow green flash: Your phone is in contact with a
network.
Fast green flash: Indicates an incoming call.
Slow red flash: Your phone cannot get in con-
tact with a network.
LED
Fast red flash:
The battery needs recharging.
Side key
On/off key
Press the key for one second to switch your
telephone on or off.
Function keys
with text line in display
The function of each key varies according to
whether you are in standby, menu or conversation
mode. The text line at the bottom of the display
will inform you of the actual function of each key
at any time.
Arrow keys
In standby mode: Scroll through menus, phone
book, lists, messages etc.
In conversation mode: Volume up/down.
Side key
Same function as the arrow keys.
Microphone
Voice mail key
Quick access to your voice mail.
Key
Key
Inserts the "+" before international phone num-
bers.
Inserts a pause between the main number and the
extension number.
Last outgoing call
Press for one second and the call is initiated
automatically.
6
DISPLAY SYMBOLS
Introduction
Speech call indicator
Making a call
Enter phone number. Press CALL
Fax call indicator
Data call indicator
Answering a call
The telephone rings. Press ANSWER
SMS message indicators
Ending a call
There is a new message for you.
Press END
On: There are still unread messages.
Flashing: The SMS memory is full.
Back to standby mode
Press EXIT
The telephone automatically returns to stand-
by mode when no key has been pressed for 60
seconds.
Voice mail indicator
Indicates that there is a voice mail for you.
Call divert indicator
Battery level indicator
On: All calls to your mobile telephone are diver-
ted to another telephone number.
See page 8 for more information.
Flashing: Check the status of your call diverts.
Signal strength indicator
Microphone off indicator
The stronger the signal (more signal bars
displayed), the better the radio connection.
Volume level indicator
Indicates volume level when adjusting.
List menu indicator
Phone book indicator
Scroll indicators
Ring volume off indicator
All-tones-off indicator
See page 31 for more information.
Shows you that there are more functions up
or down which you can access. Also used
for scrolling though the list menus.
Calculator
Survey of arithmetic operations in the calculator
menu.
Indicates which key to press to increase
and decrease the volume level.
Display and keypad backlighting
The backlight switches on automatically when
you press a key. In standby mode the light will
automatically switch off if no key is pressed for
10 seconds or more.
7
BEFORE YOU START
Insert rechargeable battery
When changing the battery your phone should
always be switched off.
1
1
2
2
1
Insert
Remove
Charge the battery
The battery supplied with this telephone is com-
pletely discharged. The telephone will initiate
charging as soon as you have inserted the charger
plug. The battery takes 1 to 5 hours to become
fully charged depending on type and size of the
battery.
To obtain optimum battery performance in daily
use, wait until the battery is completely dis-
charged, before recharging to full capacity.
1
1
Battery level indicator
2
During charging the battery symbols will flash on
and off one after another continuously from the
bottom of the display up. When the battery is fully
charged all 4 symbols are permanently displayed
as long as the phone is switched on.
4 batteries:
Battery is fully charged.
1- 3 batteries: Battery is partly discharged.
0 batteries:
Battery needs recharging. You
have limited conversation time
left. At the same time the phone
will emit a short warning tone and
the LED on top of the phone will
emit a fast red flash.
If you insert another battery, this should be fully
charged in order to read out the battery capacity
accurately.
8
BEFORE YOU START
Insert SIM card
Before you can make a call on your mobile
phone you have to insert the SIM card.
Should you have forgotten to insert the SIM card
the telephone will ask you to do so.
Before inserting the SIM card into the phone
please make sure that any plastic remains from
the frame punching have been removed.
2
1
Switch off your phone and remove the battery if
attached on the phone.
1. Open the SIM card holder by sliding the
catch to the left.
3
2. Lift the holder.
3. Insert the SIM card with its cut corner
pointing up and left.
4. Close the holder and slide the catch back
into place.
5. Insert the battery.
6. Switch on the telephone.
The phone will display a welcome greeting.
4
7. Enter PIN code, if requested, and
confirm by pressing OK
The telephone will now start searching for your
home network. When connection is successfully
established, the name of your network operator
will be displayed.
If the telephone cannot get in touch with your
home network it will start searching for another
co-operating network.
If the phone cannot establish contact with any
network at all and you attempt to make a call, the
display will show please redial later.
9
MAKING YOUR FIRST CALL
Selection of language
The display language of your phone is normally
the national language of the country in which you
purchased your SIM card. If this is not the case the
display language will be English. You have the
option of choosing between different languages.
If by mistake you select a language which you
don't understand you can return to your own
language by pressing the following keys:
0000
.
1. Press MENU
2. Press 31
3. Select language using
4. Confirm by pressing OK
5. Press EXIT
Making your first call
Calling
Connected to
+4596738000
1. Enter the phone number you want to call.
2. Press CALL to make the call.
3. Press END to end the call.
+4596738000
END
MENU
END
MENU
If you call a phone number which is diverted to
another phone number, the display will show the
phone number to which you are connected and
not the one entered by you.
International calls
When making an international call, enter "+" by
pressing the
-key for one second and then
enter the relevant national code number before
the telephone number (e.g. +45 for Denmark).
10
MAKING YOUR FIRST CALL
Phone numbers with
extension number
Extension numbers can be dialled by entering a
pause between the main number and the exten-
sion number. To enter a pause, press the -key
for one second until the pause code
on the display.
P
appears
Emergency calls
In most cases emergency calls can be made with
or without a SIM card. To make an emergency
call without a SIM card just enter the worldwide
mobile phone emergency number 112, press
SOS and confirm by pressing CALL.
Answering a call
Connected to
+4596738000
1. Press ANSWER when the phone rings.
2. Press END to end the call.
REJECT
ANSWER
END
MENU
Use the arrow keys
and
to increase and
decrease the speaker volume.
11
O PTIO NS W HEN IN CO NVERSATIO N
Your telephone supports the following network
options: Having more than one conversation at a
time, placing calls on hold, switching between
calls, joining calls and transferring a conversation
to another phone number.
Muting the microphone
While having a call, you may wish to have a pri-
vate conversation with someone else. You will
hear everything your caller says but you cannot
be heard by the caller.
How to proceed
To switch off the microphone:
1. Press MENU
1. Press MENU when in conversation.
2. Select Microphone off
2. Select using
either
Microphone off
Hold call
To return to your telephone conversation:
1. Press MENU
Continue call
Switch calls
Drop active
Join calls
2. Select Microphone on
Private
Drop held
Transfer call
Phone book
Send message
3. Confirm by pressing OK
Note: The status of the call determines which
menu items are visible and available for you to
select.
Putting a call on hold
You can make a second call without having to
end a call that is currently active. Key in the
second phone number and press CALL.
The first call will automatically be put on hold.
Please be aware that you can only have one call
on hold at a time. You can also put calls on hold
manually by selecting Hold call.
Continuing a call
When you want to retrieve the call put on hold,
just select Continue call.
12
KEYPAD LOCK
Switching between calls
How to lock the keypad
If you select Switch calls, the active call
will be put on hold and the call on hold will now
be active. In this way you can switch between
your conversations.
To avoid making calls accidentally you can lock
the keypad.
1. Press MENU
Ending an active call while another is on hold
An active call can be ended by selecting
Drop active. The held call will remain on
hold and you have to retrieve it to continue con-
versation.
2. Press
If you try to activate one of the keys, the display
will tell you that the keypad is locked.
Joining calls
How to unlock the keypad
If you have an active call and a call on hold at the
same time, you can select Join calls to
enable all of you to speak together.
The keypad lock is automatically disabled
– during an incoming call until you have finished
your conversation
– when the telephone is placed in the hands-free
car installation kit
Having a private call while others are on hold
If you have joined all calls and want to have a
private conversation with one of the callers,
select Private. The other calls will be put on
hold.
1. Press UNLOCK
2. Press
Ending a call put on hold
You can end the call put on hold by selecting
Drop held.
Transferring a call
If you have an active call and a call on hold you
can transfer the call without breaking the con-
nection by selecting Transfer call so that
the other parties can continue speaking to each
other.
Calling a number in the phone book
During a conversation you can make a new call
to a number stored in your phone book by
selecting Phone book.
Sending an SMS message
If you want to send a message to a third party
select Send message.
13
PHONE BOOK
You can store names and telephone numbers in
a phone book. The entries are stored on the SIM
card and the number of entries is dependent on
the capacity of the SIM card.
How to store a name
and a telephone number
If you enter the phone number with the help of
"+" followed by the national code you can use
your phone book abroad without having to think
about international codes.
The length of a name or a telephone number de-
pends on your SIM card.
There are several characters available on each
key, as shown in the table below. Press once to
get the first character, twice to get the second
character, and so on. When you need a space
between two characters, press
1. Enter the phone number.
2. Press
3. Enter name and press OK
Holding down one of the keys for one second will
give you the option of lower case. Just press the
key again for one second to return to upper case.
The telephone will suggest that the name/number
should be stored under the first vacant location
number.
4. Confirm the location number by
pressing OK
P Q R S 7 ß
Π Φ Ψ Σ
1 . , ; : ’ ” ! ¡ ? ¿
& % £ $ ¥ @ § ¤
p q r s 7 ß
A B C 2 Æ Å Ä Ç
a b c 2 æ å ä à
T U V 8 Ü Θ
t u v 8 ü ù
How to select your own
location number
D E F 3 É ∆
W X Y Z 9 Ξ
d e f 3 é è
w x y z 9
If you do not want to store the entry under the
suggested location number, you can select a
number of your own choice. Store frequently
used numbers in location numbers 1 to 9 so that
you can speed dial them by pressing only one
key (see page 15).
G H I 4 Γ
* +
g h i 4 ì
V
J K L 5
j k l 5
0- / ( ) = < >_
Space #
M N O 6 Ø
Ñ Ö Ω
m n o 6 ø ñ ö ò
1. Store telephone number and name as
described previously in steps 1. to 3.
How to edit a name and a phone
number
2. Press CLEAR and enter a location
number of your own choice (up to 3 digits).
Press CLEAR briefly
3. Confirm by pressing OK
– one character will be deleted
Press CLEAR for one second
If you choose a location number that is occupied,
the phone will give you the option of overwriting
the existing entry. If you do not want to overwrite
the existing entry, press EXIT and the location
number suggested will be visible again.
– the entire display will be deleted
14
PHONE BOOK EDITING
If the location number consists of more than 1 di-
git, press the first digit(s) and hold the last digit for
one second.
Voice mail number
If you have a voice mail number stored in your
phone book this should be stored under loca-
tion 1. On some networks this has already been
done by the operator. Contact your network
operator for further details on how to activate
your voice mail.
2. The call will automatically be initiated.
How to edit a name
or a telephone number
How to find a name
1. Press
to enter the List menu system.
and a telephone number
2. Select Phone book and press
1. Press
SELECT
2. Enter one or more letters of the name
you wish to find.
3. Select Edit entry and press OK
4. Enter one or more letters of the entry
you wish to edit or select it by using
3. The name and telephone number will be
displayed.
5. Press EDIT
If there is more than one name matching the en-
tered letters, use the arrow keys to scroll through
to find the required name.
6. Change the number using CLEAR
7. Enter the correct phone number.
8. Confirm the change by pressing OK
If there is no name to match the entered letters,
the display gives you the best match in the
phone book.
9. Change name and location number in
the same way, if necessary.
4. Press CALL to make the call.
How to delete a name and
a telephone number
When making a call the name will be shown on
the display. If the entry has no name the tele-
phone number will be displayed.
1. Press
to enter the List menu system.
2. Select Phone book and press
SELECT
Speed dialling
3. Select Delete entry and press OK
It is possible to make calls to any number stored
in the phone book more easily by using the loca-
tion number (up to 3 digits).
4. Enter one or more letters of the entry
you wish to delete or select it by using
To be able to use the speed dialling function it
must be switched on (see page 32).
5. Press DELETE
6. Reconfirm by pressing OK
1. Press the location number for one second.
15
PHONE BOOK STATUS /
PREFIX TELEPHONE NUMBERS
How to see the status of your
Prefix telephone numbers
phone book
In your phone book you can store prefix phone
numbers and add additional digits to these.
A useful feature if for instance you often call a
company with a switchboard with direct dialling
facility.
The telephone can display the total number of
locations on your SIM card and inform you how
many of these are free.
1. Press
to enter the List menu system.
How to enter a prefix telephone
number
2. Select Phone book and press
SELECT
1. Enter the prefix digits of the telephone
number.
3. Select Status and press OK
2. Hold down the -key for approx. 2
seconds, and you will see a
display.
W
on the
3. Repeat, holding down the -key for each
character you wish to add to the prefix
number.
4. Press
5. Enter name and location number
and press OK
How to call a prefix telephone
number
1. Press
2. Find the number you wish to call in your
phone book.
3. Press CALL
4. Enter the actual digits to replace the
W
5. The call will automatically be initiated.
16
ALTERNATIVE PHONE BOOKS
Depending on your SIM card you may have diffe-
Own numbers
rent alternative phone books. These phone books
will be visible in the phone display only if they
are available and enabled.
Some networks offer the possibility of having
more than one phone number on the same SIM
card. For instance one for normal conversations,
one for fax and one for data transmission.
Fixed numbers
This sub menu operates in the same way as the
ordinary phone book menu giving you the possi-
bilities of finding, adding, editing and deleting the
entries.
With the help of this alternative phone book you
can restrict the use of your phone only to num-
bers stored in this special phone book. This tele-
phone book operates in exactly the same way as
your ordinary phone book.
However, in order to be able to make such a
phone book you need to have a PUK2 code from
your network operator and to use a PIN2 code of
your own choice.
See on page 35 under Phone book setup how to
make use of fixed numbers.
Service numbers
This phone book contains customer care, hotline
service numbers, etc. Your network operator de-
fines the numbers stored in this phone book and
the contents cannot be changed by you.
Barred numbers
In this phone book you can store numbers to
which you do not allow any calls. This phone
book operates in exactly the same way as your
ordinary phone book.
In order to be able to make such a phone book
you also need to have a PUK2 code from your
network operator and to use a PIN2 code of your
own choice.
See page 35 under Phone Book Setup how to
make use of barred numbers.
17
LIST MENU SYSTEM
Information about outgoing, answered and missed
calls as well as SMS messages are automatically
stored in lists:
How to access
the List menu system
1. Press
Outgoing calls
2. Select the menu you want to access
•
View names/phone numbers of your latest
outgoing calls
by using
or
3. Confirm by pressing SELECT/OK
4. Select the sub menu you want to access
Answered calls
using
and press SELECT/OK
•
View names/phone numbers of your latest
answered calls
Back to standby mode
Missed calls
While you are in menu mode, pressing EXIT
briefly will bring you one level up in the system.
Holding EXIT will always bring you to the
standby mode.
•
View names/phone numbers of you latest calls
received but not answered
Phone book
The telephone automatically returns to standby
mode when no key has been pressed for 60 se-
conds.
•
•
Find, add, edit or delete entries
Phone book status
Fixed number phone book
•
•
Find, add, edit or delete entries
Phone book status
Service number phone book
•
Find entries
Barred number phone book
•
•
Find, add, edit or delete entries
Phone book status
Own numbers
•
Find, add, edit or delete entries
Messages
•
•
•
•
•
Inbox for received point-to-point messages
Outbox for sent point-to-point messages
Favourite messages
Send messages
Read broadcast messages
18
OUTGOING CALLS / ANSW ERED CALLS
Outgoing calls
Who is calling?
Your phone has memory for your last 10 dialled
telephone numbers.
Calling Line Identification (CLI) is a network
feature whereby the phone numbers of callers
to your phone are shown on your phone's display.
If your caller is one of the entries that you have
stored in your phone book, then his name will
appear on your display.
How to see the list
of last outgoing calls
1. Press
to enter the List menu system.
To enable the telephone to identify the calls it is a
condition that the network supports Calling Line
Identification.
2. Select Outgoing calls and press OK
3. Scroll through the telephone numbers.
4. When the telephone number you wish
to redial is displayed, press SELECT
Answered calls
Your phone remembers the last 10 calls your
phone has received.
5. Press CALL to initiate the call.
How to see the list
of answered calls
Shortcut to your last outgoing call
However, to use this facility you must enter the
Phone setup menu and select
1. Press
to enter the List menu system.
Speed dialling on (see page 32).
2. Select Answered calls and press OK
1. Just press 0 for one second and the
3. Scroll through the telephone numbers.
call is initiated automatically.
4. When the telephone number you wish
to redial is displayed, press SELECT
5. Press CALL to initiate the call.
19
MISSED CALLS
Missed calls
How to copy a phone number from
one of the lists into your phone book
Your phone remembers the last 10 incoming calls
which you did not answer.
1. Press
to enter the List menu system.
The display will tell you how many missed calls
your phone has received. If, for instance, there are
15 missed calls the standby display will show
2. Select the actual menu and the phone
number you wish to copy into your
phone book.
.
15.
3. Confirm by pressing SELECT
As the telephone registers only identified calls in
the list, the number of missed calls shown on the
display and the number of phone numbers actu-
ally listed may be different.
4. Press
to access your phone book.
5. Give the number a name and a location
number and press OK
Immediate access to the list of
missed calls
How to delete call information
You can delete all entries stored in the Outgoing,
Answered and Missed calls lists. Select the sub
menu Delete call information in the
Phone book setup menu and select the list which
you want to delete.
1. Press
2. Scroll through the telephone numbers
using
or
3. When the telephone number you wish
to dial is displayed, press SELECT
4. Press CALL to initiate the call.
How to see the list of missed calls
at a later moment
As soon as you have used the list, either to make
a call or to view numbers, the
symbol will
disappear from the display. However, the list will
always be available through the List menu system.
1. Press
to enter the List menu system.
2. Select Missed calls and press OK
The telephone number will be deleted from the
list as soon as you have called it, but you can
always find it again in the list of last outgoing
calls.
20
MESSAGES
In addition to reading the message, you can either
Short Message Services (SMS)
Your phone can receive and send short text mes-
sages via the network. On some networks you
have to subscribe to this facility.
– delete it
– send a reply
– forward it to another phone number
– edit it before sending
– extract a phone number, if any, from the mes-
sage to call or to store in your phone book
– call back to the sender
There are two types of messages: point-to-point
messages which you can both receive and send,
and cell broadcast messages which you can only
receive.
1. Press OPTION
Point-to-point messages
2. Select the option you wish to enter
and confirm by pressing OK
A new incoming message will be indicated by the
SMS indicator
on the standby display, as well
as by a message tone (if enabled – see page 31).
The display will also inform you how many new
messages there are for you.
3. The display will guide you through
the next steps.
When a message has been read it will be indi-
cated by a √ to the left of the date of receipt.
How to read a new message
The SMS indicator
display as long as there are unread messsages.
remains on the standby
1. Press
to access the messages.
The display will show date and time of receipt
of each individual message.
Delete messages
If the SMS indicator
that the message memory is full.
is flashing, it indicates
2. Select the message you want to read by
means of
or
and confirm by
pressing SELECT
You can delete all messages stored either in the
Inbox or the Outbox at the same time.
The phone number of the message sender will be
displayed in front of the message. You can now
scroll through the message by using the arrow
keys.
1. Enter the sub menu
Delete messages
2. Confirm by pressing OK
The message is automatically stored in the inbox
if you do not delete it.
21
MESSAGES
How to read a message again
4. End your message by pressing OK
1. Press
to enter the List menu system.
5. Select whether you wish to
Send message
2. Select Messages and press SELECT
at once or whether you wish to
Save message
3. Select Inbox by pressing OK
for sending it later on.
4. Scroll through the list of messages and
confirm your choice by pressing SELECT
6. Confirm your choice by pressing SELECT
Having selected Send message the phone
will ask for a phone number to send the message
to. Either enter a phone number or select one
from your phone book using
How to send a message
Before you can send a message you have to enter
your network operator's telephone number for
this special service. Contact your network opera-
tor to obtain this number. On page 34 you can see
how you enter this special phone number and
how to select validity period, transmission format
etc. once for all. If you do not specify these para-
meters in the Setup menu system you will be
asked for a specification each time you wish to
send a message.
The message is automatically stored in Outbox
under Messages in the List menu system.
Favourite messages
Your phone contains a list of frequently
used messages, e.g.
The meeting .. is moved to ..
You only need to insert name, place or time in the
empty spaces. You may also add or delete words,
as required.
1. Press
to enter the List menu system.
2. Select Messages and press SELECT
3. Select New message by pressing OK
1. Press
to enter the List menu system.
2. Select Messages and press SELECT
Start entering your message using the keypad in
the same way as you enter a name or a tele-
3. Select Favourites and press OK
phone number in the phone book.
moves the
4. Select the message you want to use and
confirm by pressing SELECT
cursor to the left, moves the cursor to the
right. Delete unwanted characters by pressing
CLEAR.
The cursor automatically points at the first empty
space. Once you have filled this in, you can move
the cursor to the next empty space simply by
pressing NEXT. The cursor can also be moved
If you want to use the -symbol in your SMS
message press the -key briefly twice.
forward and backward by pressing
respectively.
or
5. Complete the message by pressing OK
6. Send the message, or save it for later use.
22
MESSAGES
How to edit an old message
Cell broadcast channel list
To be able to receive cell broadcast messages you
have to set up a list of the channels from which
you want to receive information. See page 34 for
how to set up this list and to specify what kind of
information you wish to receive.
1. Press
to enter the List menu system.
2. Select Messages and press SELECT
3. Select Inbox, Outbox or
Favourites by pressing OK
4. Select the message you wish to edit
and confirm by pressing SELECT
How to read a cell broadcast message
A cell broadcast message is scrolled twice on
the display at the time of reception. If you don’t
see it at that time, you can read it via the List
5. Press OPTION
6. Select Edit message and press OK
menu system by pressing
, selecting
Messages and then Broadcasts.
A digit between the scroll indicators on the
display indicates the number of the individual
messages.
The display will show the Broadcast ID number
and you can thus identify the kind of message
received. Messages are read in exactly the same
way as Point-to-point messages. A read message
will be marked by √.
Cell broadcast messages
To select whether you want the cell broadcast op-
tion to be on or off you must enter the Message
setup menu and select Broadcast setup
(see page 34).
In addition to reading the message, you can either
– delete it
– store it on your SIM card
These are general messages broadcast to a group
of telephones and are available to network sub-
scribers only. Cell broadcast messages are typi-
cally local weather and traffic reports, stock mar-
ket prices, sports results etc. If you have selected
Roaming, i.e. if you are abroad and connected to
a foreign network (see page 28), you may be able
to receive cell broadcast messages from other net-
works, too.
– forward it to another phone number
– extract a phone number, if any, from the mes-
sage to call or to store in your phone book
1. Press OPTION
2. Select the option you wish to enter and
confirm by pressing OK
3. The display will guide you through the
next steps.
The messages are transmitted in numbered chan-
nels and in general each channel will contain in-
formation of the same type. Cell broadcast mes-
sages may be sent out in different languages.
Contact your network operator for further details.
A cell broadcast message will be deleted when
you switch off your telephone – even if the mes-
sage has not been read.
23
SETUP MENU SYSTEM
The setup menu system offers you the possibility
of setting the individual sub menus and options
according to your own personal wishes.
Phone book setup (Menu 5)
51 Fixed dialling on/off
52 Barred dialling on/off
53 Phone book sorting
54 Delete all entries stored in the lists
(Outgoing, Answered, Missed)
Network services (Menu 1)
11 Call divert
12 Call barring
13 Call waiting
14 Closed user group
15 Outgoing call identification
Call timers and charge (Menu 6)
61 View duration and cost of last call
62 View duration and cost of total calls
63 Reset call timers
64 Display call timer and cost during
conversation
Tones setup (Menu 2)
21 Ring tone
22 Trembler (optional extra)
23 Message tone
24 Broadcast tone
25 Key tone
65 Call charge
Security (Menu 7)
71 PIN code
72 SIM card lock
26 Factory settings
73 Change network password
74 Encryption indication
Phone setup (Menu 3)
31 Selection of language
32 Dial setup
33 Selection of network
34 Power saving function
35 Car kit options
Calculator (Menu 8)
Applications (Menu 9)
The availabilility of this menu depends on your
SIM card. The options in this special menu are
defined by your network operator. The menu al-
lows you to set up a dialogue between you, your
SIM card and your network operator.
36 Edit welcome greeting
37 Incoming call setup
38 Any key answer
39 Factory settings
Message setup (Menu 4)
41 Setup for sending Point-to-point messages
42 Setup for receiving Cell broadcast messages
43 Delete messages
24
SETUP MENU SYSTEM
How to access the Setup menu system Back to standby mode
While you are in menu mode, holding EXIT will
1. Press MENU
always bring you to the standby mode.
2. Select the menu you want to access
using
The telephone automatically returns to standby
mode when no key has been pressed for 60 se-
conds.
3. Confirm by pressing SELECT
4. Select the sub menu you want to access
using
5. Confirm by pressing SELECT
Menu numbers
On the right hand side in the first line of the dis-
play you will always see the number of the menu
and sub menu in which you are operating. This is
indicated by up to 6 digits.
Example: 62
6 = Menu 6: Call timers and charge
2 = Sub menu 2: View total calls
A √ before the sub menu/option number indicates
the option you have selected.
Shortcut to the setup menu system
As you get more familiar with the Setup menu
system, you will probably find it easier to access
some of the menus simply by pressing the menu
code number.
For example, to see the duration of your total
calls:
1. Press MENU
2. Press 62
25
CALL DIVERT
You have the option of diverting all calls or
Validity time
choosing to divert incoming calls only if un-
answered. The unanswered calls option diverts
calls
If you have selected
Divert if unanswered
or
Divert if no reply
you can specify that a period of time must elapse
before the call is diverted. This period can be
from 5 to 30 seconds at intervals of 5 seconds.
– if you are busy
– if you do not reply
– if there is no contact
Registration
To enable a call divert you must register it first.
You will be asked to specify whether you want
It is always possible to see the status of the
activated call diversions by selecting Status.
Registered call diversions can be cancelled
individually or can all be cancelled at once by
selecting Cancel all.
the call divert function to apply to all services
speech data services fax services or mes-
sage services (SMS).
,
,
,
Deactivation/activation
You may not be able to make use of the deactiv-
ate and activate options. In that case you must
cancel a call diversion by selecting Cancel.
Next time you want your incoming calls diverted,
select Register.
Calls can be diverted to a telephone number
stored in your phone book or to any other num-
ber. Access your phone book by pressing
enter a phone number via the keypad.
or
If you have chosen to have all calls diverted, the
call divert indicator
standby display.
will be visible on the
If you wish to suspend your calls being diverted
for a time, select Deactivate. All registra-
tions will remain in the network, so next time
you wish to divert your calls to the same number,
simply select Activate.
26
CALL DIVERT
How to activate call divert for all
calls
1. Press MENU
2. Select Network services
by pressing SELECT
3. Confirm by pressing SELECT once
more to indicate that you want access
to the call divert menu.
4. Select using
Divert all calls
Register
–
All services
–
Speech
–
Data services
–
Fax services
–
Message services
–
Number
Activate
Deactivate
Status
Cancel
Status
Cancel all (call diverts)
5. Confirm your choice by pressing OK
If you want to activate a call divert on the
basis of
Divert if unanswered
Divert if busy
Divert if no reply
Divert if no contact
just follow the procedure described above
giving you the same options.
27
CALL DIVERT
You can set up call barring for different types of
outgoing and incoming calls to restrict the use of
your phone.
1. Press MENU
2. Select Network services
by pressing SELECT
You have to activate the type of call barring you
wish to set up. You are asked to specify whether
you want the call barring to apply for all ser-
vices, speech, data services, fax services or mes-
sage services (SMS).
3. Select Call barring using
and confirm by pressing SELECT
4. Select using
Outgoing calls
All calls
When setting up or cancelling any call barring,
you will be asked to enter your 4-digit password
provided by your network operator.
Activate
–
All services
–
You can always see the status of the actually
activated call barring by selecting Status.
Speech
–
Data services
–
Fax services
–
Message services
Outgoing call barring
Status
Cancel
Select All calls if you want to bar all out-
going calls. Select International if you
want to bar international calls only. Select
Roaming if you want outgoing calls to be
barred when you are connected to a foreign
network – this still leaves you the possibility of
making calls to your home country.
Status
Cancel all (call barrings)
5. Confirm your choice by pressing OK
If you want to activate call barring for
International calls
Roaming calls
Calls to Emergency Services (see page 11) can still
be made even if all outgoing calls are barred.
just follow the procedure described above
giving you the same options.
Call barring of incoming calls is activated and
cancelled in exactly the same way covering the
sub menus
All calls
Roaming calls
28
CALL W AITING
Incoming call barring
Call waiting
Select All calls if you want to bar all in-
coming calls. Select Roaming if you want
incoming calls to be barred only when you are
connected to a foreign network.
During a conversation your telephone can notify
you that a new call is waiting. This is indicated by
a special ringing tone in the earphone. To activate
this function just select Activate in the Call
waiting option.
Cancelling call barrings
If you want to answer the new call press ANSWER
Call barrings can be cancelled individually or by
selecting Cancel all.
The active call will be put on hold automatically.
See page 12 for further details on how to handle
multi-party calls.
If you do not want to answer the call, press
REJECT instead. You can have the new call
diverted to, for example, your telephone an-
swering service. See page 26 for how to set up
a call divert.
If you do not want to be disturbed by new in-
coming calls you can disable the function by
selecting Cancel in the Call waiting option.
You can always see whether Call waiting is
activated or not by selecting Status.
29
SUPPLEMENTARY NETW O RK
SERVICES
Closed user group
This is a network feature by which the use of your
telephone is restricted to certain phone numbers
within a group defined by the network operator
and the owner of the SIM card. You may be a
member of different groups. Each group has its
own ID number. The network defines which
group is your default user group. You have the
option of calling outside the group – perhaps at a
higher charge.
Outgoing call identification
You can select whether you want your phone
number to be shown or not at the next outgoing
call. In Network Service select the option
Outgoing call identification, then
Show info for next call and confirm
your choice by pressing OK.
Unstructured supplementary services (USSD)
On some networks you have the possibility of
sending unstructured supplementary service
strings. An USSD service string should always be
terminated by pressing the -key.
In order to be able to send USSD service strings
you must enter the Phone setup menu and select
Speed dialling off. Pressing the relevant
keys 0 to 9 for one second will lead you to the
alpha mode enabling you to enter letters and di-
gits instead of only digits.
Contact your network operator for further infor-
mation on these supplementary services.
30
TO NES SETUP
You can disable all kinds of tones by pressing
How to adjust tones
MENU and then
. In that case the symbol
will be seen in the display. Just press MENU and
1. Press MENU
again to revert to your original settings.
2. Select Tones setup using
3. Confirm by pressing SELECT
Trembler
4. Select using
either
If you have a trembler battery you can select
whether the trembler should be active or not
at an incoming call.
Ringing tone
Trembler (Optional extra)
Message tone
Message tone
Broadcast tone
Key tone
Your telephone can alert you to the arrival of a
SMS message by means of different alert tones.
Factory settings
5. Confirm by pressing SELECT
Keypad tone
6. Select the volume or pattern you want
to change using
To help you keep check on your dialling, the
phone can be set to give 8 different tone patterns
following every key pressed.
7. Confirm by pressing OK
Factory settings
Ringing volume level and ringing
tones
You can always return to the original tones setup
of your phone. The phone is set up by the manu-
facturer as follows:
You can adjust the ringing volume level and
select the ringing tones according to your sur-
roundings and preferences.
Ringing volume
level:
Ringing tone:
Trembler:
Message tone:
Broadcast tone:
Key tone:
Loud
British
Off
Simple
Discreet 1
3
Ringing volume levels are high, medium, low,
escalating and off. The LED on top of the phone
will emit a fast green flash to indicate an in-
coming call. If the ringing tone is set to off
you will see the
play.
symbol on the standby dis-
You have the option of selecting between 27 dif-
ferent ringing tone patterns.
The selected ringing tone will sound at the rele-
vant ringing volume level when making your
selection.
31
PHONE SETUP
This menu offers you the possibility of setting some
of the telephone's options according to your own
personal wishes.
Speed dialling
To speed dial using your location numbers, you
have to select Speed dialling on. If you
do not want to make use of this feature, select
Speed dialling off.
How to set up options
1. Press MENU
Network selection
2. Select Phone setup using
3. Confirm by pressing SELECT
When you wish to use your phone abroad, you
have to select a foreign network. This can be
done either manually or by letting your telephone
do it for you automatically.
4. Select using
either
Language
In the automatic mode, your phone will auto-
matically try to reach your home network first,
then, alternatively to find another available net-
work stored in a preferred list made by you (see
below).
Dial setup
Network selection
Power saving
Car kit
Greeting
In the manual mode, the phone will always start
searching for the network with which it was in
contact when it was switched off. If the phone
cannot locate this network it will present some
alternative networks on the display, and you can
then select one manually.
Incoming call setup
Any key answer
Factory settings
5. Confirm by pressing SELECT
6. Make your selection using
7. Confirm by pressing OK
You can select any network from the list, but
your phone can get in contact only with co-
operating networks (Roaming). The telephone can
get into contact with other networks but only for
emergency calls.
Language selection
The display language of your phone is normally
the national language of the country in which you
purchased your SIM card. If this is not the case the
display language will be English. You have the
option of choosing between different languages.
(See page 10 for how to select language).
Your dealer or network operator can tell you
which networks are co-operating.
Preferred list
The list of networks on your SIM card defines the
order of preference in which your phone will se-
lect a network in automatic mode. Network ope-
rators offer different services and call charges;
therefore it may be beneficial for you to make a
preferred list of your own. Enter the individual
networks in your own order of preference and
store them on your SIM card.
Dial setup
Automatic redial
If the phone number you are calling is busy or
your call is not answered, you can let your
phone make up to 10 automatic redial attempts.
A special redialling success tone sounds when the
attempt is successful. To cancel the auto redialling
attempts just press the left function key.
32
PHONE SETUP
To do this, you must access the Selection of net-
work sub menu, select the Set preferred list op-
Welcome greeting
You can change the welcome greeting of your
phone according to your own wishes. Delete the
old message by holding CLEAR, enter the new
greeting via the keypad and confirm by pressing
OK.
tion and use
to select the empty location in
which you want to store the new network. Pres-
sing EDIT will give you a list of available net-
works. Scroll through the list using
. When you
see a network you wish to store in your preferred
list, just press OK. If you select a currently used
location and press EDIT, the former occupant
can be deleted when you enter the new one. Just
press EXIT to leave the list as it was.
Incoming call setup (fax/data)
Do not enter this menu unless you are using your
phone for fax and data communications! Fax and
data capability will require a separate data inter-
face kit (optional). The menu settings are explained
in the user guide supplied with this kit.
Once a network is stored in the preferred list, you
can always see the country and network code of
the actual network by pressing EDIT in the Set
preferred list option.
Any key answer
You can answer an incoming call by pressing any
key you like except for the left function key and
the arrow keys if you select
Any key answer on.
Power saving
To save your battery and thus increase both
conversation and standby times you can select
whether you want the display contents to be
visible or not in standby mode.
Select Display remains on if you want it
to be visible, and Display switches off
if you want it not to be visible. The display will
switch off after 3 minutes in standby mode.
Factory settings
You can always return to the original setup of
your phone. The phone is set up by the manu-
facturer as follows:
Language:
Dial setup:
Automatic
In standby mode the display and keypad backlight
will always switch off after 10 seconds if your tele-
phone is set to Backlight on. However, you
have the option of having the backlight switched
off permanently by selecting Backlight off.
Autoredial off
Speed dialling on
Automatic
Display on
Backlight on
Network:
Power saving:
Car kit:
Auto answer off
Auto power off automatic
Welcome
Car kit installation
This option is only effective if the phone is con-
nected to a handsfree car kit. See page 39 for
more information.
Greeting:
Incoming call setup: Next call type: Speech
All call type: Speech
Any key answer:
Off
33
MESSAGE SETUP
back to you through the same chain of service
Send message setup
centres. To keep this possibility open, you must
enter the Send Message Setup option and select
Reply path on.
Before you can send a message you have to enter
your network operator's telephone number for
this special service. Contact your network opera-
tor to obtain this number.
Broadcast setup
1. Press MENU
To set up the list covering the kind of information
you wish to receive, select the option
Broadcast channels. The display will
show you various locations in which you can
store the individual channels. Pressing EDIT will
give you a range of different kinds of information.
2. Select Message setup using
and confirm by pressing SELECT
3. Select Send message setup
4. Select Service centre
5. Confirm by pressing SELECT
Use
to scroll through the possibilities and
confirm your choice by pressing SELECT. The
selected kind of information is now stored in the
channel list. Proceed in the same way if you want
to receive other kinds of information.
6. Enter the SMS operator telephone number.
Remember to add "+" and national code
before the number.
Some network operators offer cell broadcast mes-
sages in different languages. Select the option
Broadcast language and confirm your
choice by pressing OK.
7. Press OK
The number will automatically be used for sen-
ding all future messages.
You can select whether you want the cell broad-
cast option to be on or off by selecting
Having stored a service centre number you have
the option of adding a new service centre, dele-
ting a service centre or editing the number of an
Broadcast setting and using
to
select whether the function should be on or off.
existing service centre by pressing
and con-
firm your choice by pressing OK.
The option of storing more than one service cen-
tre number may not be available with all SIM
cards.
If for some reason your message cannot be deliv-
ered, it will remain with your SMS operator for a
period of time specified by you under Validity
period.
Under the option Teleservice you can specify in
what format you want your messages to be sent -
for instance select Text message if you
want to send it to another mobile telephone.
For messages that have to be sent via several
service centres to reach the recipient, some net-
works offer the feature of sending a reply, if any,
34
PHO NE BO O K SETUP /
CALL TIMERS AND CHARGE
Fixed dialling
Call timers and charge
In order to enable you to make use of fixed dial-
ling numbers stored in an alternative phone book
defined by you, select Fixed dialling on.
Having selected Fixed dialling on your
ordinary phone book will not be visible on the
display and can thus not be accessed, but, of
course, it will remain on your SIM card and can
be accessed again by selecting
Your telephone can display the actual duration
and cost of an ongoing conversation if you so
wish. It can also show you the duration and cost
of the last call and all calls made with your SIM
card since the timer was last reset. However, the
call charge feature must be supported by your
network.
In order to be able to see the cost in the display
you have to enter a unit price and the actual cur-
rency. You can also enter a maximum call charge
limit, so that when this maximum has been
reached no more phone calls can be made. The
telephone will inform you about the remaining
call charge balance.
Fixed dialling off.
Barred dialling
If you have a barred dialling phone book on your
SIM card you must select
Barred dialling on to enable it.
Having selected Barred dialling on any
attempt to make a call will make the phone com-
pare the dialled number with the numbers stored
in this special phone book. If the dialled number
is stored in the Barred numbers phone book the
call will be refused.
To enter or change call charge and currency you
will be requested to enter your PIN2 code.
How to see timers
1. Press MENU
To enable the fixed dialling and the barred dial-
ling phone books you have to enter your PIN2
code.
2. Select Call timers and charge
using
3. Confirm by pressing SELECT
Phone book sorting
4. Select using
either
You have the option of selecting whether you
want your phone book sorted by name or by
location.
Last call
Total calls
Reset timers
Display timer (on display)
Call charge
Delete call information
–
You can delete all entries stored in the Outgoing,
Answered and Missed calls lists. Select the sub
menu Delete call information and
select the list which you want to delete.
maximum
–
unit price
–
currency
–
remaining
5. Confirm by pressing OK
35
SECURITY
PIN code
How to enable, disable and change
PIN codes
To prevent misuse of your SIM card, e.g. if it is lost
or stolen, you can select a PIN code to be entered
each time you switch on the phone.
1. Press MENU
2. Select Security using
3. Confirm by pressing SELECT
The PIN code is a 4 to 8-digit number of your
own choice, which you can change any time
you like.
4. Select using
either
If you enter an invalid PIN code three times, your
SIM card will be blocked and to unblock it you
have to enter the PIN Unblocking Key (PUK) code
supplied by your network operator. This proce-
dure prevents unauthorized person from working
out your PIN code by repeatedly entering different
combinations of numbers.
PIN code
–
PIN code on
–
–
PIN code off
PIN code change
–
Change PIN
–
Change PIN2
SIM lock
–
The display will inform you how many tries you
have left before the SIM card is blocked. If you
enter an invalid PUK code 10 times, your SIM
card will be permanently blocked and you have
to contact your network operator to have it un-
blocked.
SIM lock on
–
SIM lock off
Network password
Encryption indication
–
Encryption indication on
–
Encryption indication off
Some SIM cards use a PIN2 code for accessing
special functions. Contact your network operator
for further information on PUK2 and PIN2 codes.
5. Confirm your choice by pressing OK
SIM lock
You can link your telephone and your SIM card
together. This means that if, for instance, your
phone is stolen it cannot be used together with
another SIM card. To enable this feature just select
SIM lock on and enter an 6 to 16-digit code
of your own choice. For your own sake remember
to write down this code to be able to deactivate
the lock at a later time. You have 10 attempts be-
fore the phone is blocked.
36
SECURITY
How to change password
If you subscribe to a call barring service your net-
work operator will have supplied you with a 4-
digit password. If you want to change this, select
Network password in the Security menu.
Encryption indication
If you connect to a network which does not sup-
port encryption, you will get a warning in the dis-
play when trying to make a call. You have the op-
tion of turning off this network warning by
selecting Encryption indication off
in the security menu.
37
CALCULATOR
You can use your mobile phone as an ordinary
calculator.
Calculation examples
5 plus 2
Press 5, hold down 1 for one second, press 2 and
How to use the calculator
press =
(7)
1. Press MENU
8 divided by 4
2. Select Calculator using
3. Confirm by pressing OK
Press 8, hold down 5 for one second, press 4 and
press =
(2)
Square root of 8
Press 8 and hold down 6 for one second
Your telephone now acts as a normal calculator.
The equal-sign (=) is found on the right hand
function key.
(2.8284271)
15 per cent of 60
Press 6, 0, hold down 2 for one second,
press 1, 5, hold down 7 fo r one second
Hold down the relevant key for one second to get
the desired arithmetic operation.
(9)
By pressing
you get access to a survey of what
arithmetic operation is placed on what key.
-5.2 times 10,000
Press 5,
press 1, hold down 9 for one second, press 4 and
finally = (-52OOO)
, 2, , hold down 2 for one second,
Key
1
2
3
4
5
6
7
8
Operation
Addition (+)
Multiplication (*)
Square function (x2)
Subtraction (-)
Division (/)
Square root (√)
Percentage (%)
Fractions (1/x)
Exponent (E)
As soon as a figure is stored in the memory this
will be indicated on the display by an M. You can
access the memory by pressing
(MR).
or the -key
The memory is reset each time you switch off
your phone.
9
M+ or decimal point (press briefly)
MC
0
MR or -/+ (neg./pos.) (press briefly)
38
ACCESSORIES
Professional Handsfree Car Kit
Remove the rubber plug covering the antenna hole
on the back of the handset.
2
When placing the phone in the cradle, make sure
that the antenna catch is open (slider in left hand
side position). When the phone is in place, move
the slider to the right hand side for locked position.
1
When your phone is placed in the cradle, it will
switch on automatically with the car ignition. You
can select whether you want the telephone to
switch off automatically with the car ignition after
a delay of 1 hour or whether you want to switch it
off manually.
3
If you have selected
Switch off automatically
and want to switch your telephone off while the
ignition is still on, you must do so manually.
The display and keypad backlighting on your
phone will switch on and off automatically with
the car ignition. While the phone is switched on
and placed in the cradle the backlighting will
remain on continuously.
The battery will be automatically recharged as
necessary.
How to make a hands-free call
How to receive a hands-free call
1. Enter the phone number you wish to
call or retrieve it from the phone book.
1. Press ANSWER when the phone rings.
2. Press END to end your call.
2. Press CALL to let the conversation take
place via the external speaker and
microphone.
By selecting Car kit auto answer on
you can set your telephone to answer a call auto-
matically after 5 seconds. This option is only ef-
fective when the car ignition is on.
3. Press END to end your call.
If you have selected Any key answer on
in the Phone setup menu you can, of course,
answer the call by pressing any key.
39
ACCESSO RIES
If you want to switch from hands-free mode to
normal mode, just lift the handset and cradle as
one complete unit – and back again for returning
to hands-free. The switching is performed auto-
matically.
1
2
3
Basic Car Kit
Remove the rubber plug covering the antenna hole
on the back of the handset.
2
When placing the phone in the cradle, make sure
that the antenna catch is open (slider in left hand
side position). When the phone is in place, move
the slider to the right hand side for locked position.
1
The cradle connects to the car’s cigar lighter plug
and external antenna.
The battery will be automatically recharged as
necessary.
When your phone is switched on and placed in
the cradle, the backlighting will remain on.
An external antenna must be connected, since the
handset antenna is disconnected when the phone
is placed in the cradle.
1
2
40
ACCESSO RIES
Simple Car Holder
Using the Simple Car Holder will require a spe-
cial knob to be fitted on the back of your phone.
The necessary parts come with the package.
1
2
3
How to fit the knob:
Remove the label from the back of the phone. The
knob can now be fitted by means of a screwdriver.
Place the new label to cover the screw.
1
= PZ 1
2
Headset
How to make a hands-free call
1. Enter the phone number you wish to
call or retrieve it from the phone book.
2. Press CALL to let the conversation take
place via the external speaker and
microphone.
3. Press END to end your call.
How to receive a hands-free call
1. Press ANSWER when the phone rings.
2. Press END to end your call.
41
ACCESSO RIES
Desktop charger
The desktop charger is powered by means of the
charger supplied with your telephone.
When you place the telephone in the desktop
charger you have to make sure that the battery
symbols on the display start flashing. The battery
takes 1 to 5 hours to become fully charged de-
pending on type and size of the battery. During
charging the battery symbols on the display of
your telephone will flash on and off one after
another. When the battery is fully charged all
4 symbols are permanently displayed.
A spare battery can be attached for charging on
the back of the desktop charger. The LED indica-
tor on the front will show a red light during char-
ging and a green light when the spare battery is
fully charged. The indicator will be off when there
is no spare battery attached.
1
Insert
2
1
2
1
Remove
42
ACCESSO RIES
Belt clip
The necessary parts for fitting the belt clip to your
phone comes with the package.
1
2
3
How to fit the belt clip:
Remove the label from the back of the phone.
The belt clip can now be fitted by means of a
screwdriver. Place the new label to cover the
screw.
= PZ 1
Data Interface
Your phone can be connected to your PC or
laptop computer for data and fax communication.
Please refer to separate user guide supplied with
the kit.
Other accessories
Extra Light 350 mAh Li-ION battery
Vibra-Alarm 650 mAh Li-ION battery
Light 650 mAh Li-ION battery
Light 750 mAh NiMH battery
High Power 1800 mAh Li-ION battery
Travel Charger
Cigarlighter Charger 12/24 V
43
INDEX
Accessories
Alternative phone books 17
39
Find a name/number
Fixed numbers
15
17
Prefix telephone numbers 16
Private calls
13
Answered calls
Answering a call
Any key answer
Auto answer
Automatic redial
Automatic switch off
19
7, 11
33
39
32
Professional handsfree
car kit
PUK code
PUK2 code
Putting a call on hold
Greeting
33
41
39
36
36
12
Headset
Important notice
Incoming call setup
International calls
4
33
10
39
Reading a message
- cell broadcast
- point-to-point
Remaining call charge
Reset timers
Barred numbers
Basic car kit
Battery
Battery level indicator
Before sending messages 22
Before you start
Belt clip
Broadcast channel list
Broadcast language
Broadcast setup
17
40
8
23
21
35
35
31
Joining calls
13
Keypad
Keypad lock
Keypad tone
6
13
31
8
Ringing tones
8
43
34
34
34
Security
36
10
32
22
34
17
24
9
Language
List menu system
Location numbers
10
18
14
Selection of language
Selection of network
Sending a new message
Service centre (SMS)
Service numbers
Setup menu system
SIM card
SIM card limitations
SIM lock
Simple car holder
Speed dialling
Making a call
7, 10
35
25
Maximum call charge
Menu numbers
Messages
- cell broadcast
- favourites
- point-to-point
Message setup
- cell broadcast
- point-to-point
Message tones
Missed calls
Calculator
Call barring
Call divert
Call timers/charge
Call waiting
Car kit installation
CLI
Closed user group
Continuing calls
Currency/Call charge
38
28
26
35
29
39
19
30
12
35
23
22
21
4
36
41
15
14
34
34
31
20
12
Store a name/number
Supplementary network
services
30
13
Switching calls
Data/fax transmission
Data interface
Delete all messages
Delete a name/number
Delete call information
Desktop charger
Display
Duration of last call
Duration of total calls
33
43
21
15
35
42
7
Muting the microphone
Tones setup
Transferring calls
Trembler
31
13
31
Network password
Network selection
37
32
Options in conversation
Outgoing calls
Outgoing call identity
Own numbers
12
19
30
17
Unit price
USSD
35
30
35
35
Voice mail
Volume control
15
7
Phone book
Phone book sorting
Phone book status
Phone setup
PIN code
PIN2 code
Power saving
Precautions
14
35
16
32
36
36
33
3
Edit an old message
Edit a name/number
Emergency calls
Encryption indication
Extension numbers
23
15
11
37
11
Welcome greeting
33
Factory settings
- telephone
- tones
33
31
Preferred list
32
44
BOSCH EASY SETS
Accessories for Bosch mobile phones
GSM 908
For the car
101
Professional Handsfree Car Kit
Basic Car Kit
Simple Car Holder
Cigarlighter Charger 12V/24V
For the computer
102
103
104
201
Data Interface
For charging
305
301
302
303
304
Desktop Charger
Travel Charger - EU
Travel Charger - UK
Travel Charger - AUS
Travel Charger - US
For power
501
502
503
505
504
Extra Light 350 mAh Li-Ion battery
Light 650 mAh Li-Ion battery
Vibra-Alarm 650 mAh Li-Ion battery
Light 750 mAh NiMH battery
High Power 1800 mAh Li-Ion battery
Outfit
701
702
Headset
Belt clip
Bosch Telecom GmbH
Produktbereich Endgeräte
Kleyerstr. 94,
60326 Frankfurt/Main,
Tel. (0180) 5 2214 92
Fax (0180) 5 2214 93
Robert Bosch SA
D
B
E
Ctra. Nacional VI, km. 18,150,
28230 Las Rozas Madrid
Tel. (3 41) 6 31 23 72
Robert Bosch AG
Postfach 146, 1110 Wien,
Tel. (4 31) 79722-0
A
N.V. Robert Bosch S.A.
Rue Henri Genessestraat 1,
1070 Bruxelles / Brussel
Tel. (02) 5 25 5460
Robert Bosch AG
Industriestr. 31, 8112 Otelfingen,
Tel. (4 11) 8 47 14 14
CH
TR
Robert Bosch A/S
Telegrafvej 1, 2750 Ballerup,
Tel. 44 89 89 89
DK
F
Bosch Sanayi ve Ticaret A.S.
Ambariar CAD No. 4,
34780 Zeytinburnu-Istanbul
Tel. (0212) 5 58 2470
Robert Bosch (France) S.A.
B.P. 170, 32 Avenue Michelet,
93404 Saint Ouen,
Robert Bosch Kft.
P.O. Box 331, 1475 Budapest
Tel. (3 61) 43 13 710
H
Tel. (0) 1 401070 07
Robert Bosch S.A.
162 Kifissou, 12131 Peristeri, Athens,
Tel. (301) 57 01286
GR
NL
OY Hedengren AB
Lauttasaarentie 50,
00200 Helsinki
Tel. (90) 68 281
SF
Robert Bosch BV
Neptunusstraat 71,
2132 JP Hoofddorp,
Tel. 023 56 56-3 91
Beaver Distribution Ltd.
Greenhills Road, Tallaghl, Dublin 24,
Tel. (35 31) 4 51 52 11
IRL
L
Robert Bosch Ltd.
Sales Communication Equipment
P.O. Box 98
Uxbridge, Middlesex UB9 5HJ
Tel. 0345 585220
GB
I
Central Import Export Corporation
Zone Industrielle, Rue des Jones,
1818 Howald,
Tel. (2) 40 30 60
Robert Bosch
Robert Bosch Pte Ltd
38c Jalan Pemimpin,
Singapore 57180,
Tel. 3 50 54 52
SGP
ZA
Industriale e Commerciale S.P.A.
Via M.A. Colonna 35, 20149 Milano,
Tel. (3 92) 36 96-1
Robert Bosch AS
Postboks 629, 1411 Kolbotn,
Tel. 66 81 70 00
Robert Bosch (Pty) Ltd.
Private Bag X118, Randjespark,
Midrand 1685
N
S
P
Rep. of South Africa
Tel. (011) 651-9600
Robert Bosch Aktiebolag
Box 1154, 164 26 Kista,
Tel. (8) 75015 00
Robert Bosch Lda.
Av. Infante D. Henrique, Lotes 1E, 2E,
Apartado 8058, 1801 Lisboa Codex,
Tel. (3511) 8 50 00 00
|