TTAABBLLEEOOFFCCOONNTTEENNTTSS
SAFETY INFORMATION FOR WIRELESS
HANDHELD PHONES ..................................6
PRECAUTIONS ................................................. 9
SYSTEM CONFIGURATION ...........................10
WRIST STRAP ATTACHMENT .......................11
BATTERY INSTALLATION AND
RECHARGING ............................................12
To Attach the Battery Pack ................................ 12
To Detach the Battery Pack ............................... 12
To Recharge Battery ......................................... 12
FUNCTIONS ....................................................14
External View .................................................... 14
Function of Keys................................................ 15
LCD Display Indication ...................................... 15
GETTING STARTED .......................................16
Turning the Phone On/Off ................................. 16
Antenna Position ............................................... 16
Receiving Signal Strength Indicator (
) ....... 16
Battery Level Indicator....................................... 16
Power Management .......................................... 16
BASIC OPERATION........................................17
Placing Calls ....................................................... 17
To Place a Call ............................................................ 17
To Terminate a Call ...................................................... 17
Last Number Redial..................................................... 17
To Dial the Last Number Received .............................. 17
Phonebook Dialing ...................................................... 17
To mute a Phone Conversation ................................... 17
Speed Dialing .............................................................. 18
Quick Dialing ............................................................... 18
Emergency Call ........................................................... 18
OneTouch Emergency Call .......................................... 19
Receiving Calls ................................................... 19
To Receive a Call......................................................... 19
Any Key Answering...................................................... 19
Caller ID with Name .................................................... 19
Automatic Calls-in-Absence Indicator.......................... 20
Ringing Tone with Melody ............................................ 20
Distinctive Ringing (Audible Caller ID) ......................... 20
During Calls......................................................... 20
To Adjust the Earpiece Volume.................................... 20
Scratch Pad Dialing ..................................................... 20
To Send Touch Tone™ Signals .................................... 20
Automatic Talk Timer ................................................... 21
Call Waiting ................................................................. 21
Three-Way Calling ....................................................... 21
Standby................................................................ 21
Clock Indicator (Digital Mode Only) ............................. 21
End to End Signaling.......................................... 22
Touch Tone™ from Display .......................................... 22
Touch Tone™ from Memory ........................................ 22
2
PHONEBOOK OPERATION ...........................23
Phonebook Entry ................................................ 23
To Store a Number without Name ............................... 23
Overwrite Warning ....................................................... 24
Auto Hyphenation ........................................................ 24
Manual Hyphenation ................................................... 25
Automatic Storing into Phonebook .............................. 25
To Store Dual Numbers in Phonebook ........................ 26
To Store a Name with the Phone Number ................... 27
Alpha Mode ................................................................. 27
To Store a Ring Type with the Phone Number............. 29
Recall Menu ......................................................... 30
Recall Menu Tree......................................................... 30
Phonebook Recall............................................... 31
Phonebook Address Mode .......................................... 31
Phonebook Sort Scroll Mode ...................................... 31
Phonebook Key Word Search Mode ........................... 32
To Dial Dual Numbers ................................................. 33
To Review Long Numbers ........................................... 33
To Review Long Names............................................... 33
Prepending Dialing ...................................................... 33
Phonebook Edit .................................................. 34
To Modify Numbers and Names .................................. 34
To Move Numbers and Names .................................... 35
To Change Priority of Dual Numbers ........................... 36
To Erase Numbers and Names ................................... 36
Secret Memory .................................................... 37
To Store a Secret Number ........................................... 37
To Recall a Secret Number ......................................... 37
Link Dialing ......................................................... 38
To Store Linked Numbers in Phonebook ..................... 38
To Place Calls using Linked Numbers ......................... 39
Call History.......................................................... 40
To Review Outgoing Call History ................................. 40
To Review Incoming Call History ................................. 41
To Review Scratch Pad................................................ 41
To Save a Number to Phonebook................................ 42
MESSAGING FEATURES ...............................43
Voice Mail ............................................................ 43
Voice Mail Notification ................................................. 43
To Display the Number of Voice Mail Messages.......... 44
Voice Mail Dialing ........................................................ 44
Text Messages (Short Message Service) ......... 45
To Review a Text Message .......................................... 46
FUNCTION MENU ...........................................47
To Access Function Menu ................................. 47
Function Menu Tree ..................................................... 48
Lock Features ..................................................... 49
Security Code and Unlock Code ................................. 49
Keypad Lock (F11) ...................................................... 49
Phone Lock (F12) ........................................................ 50
Automatic Phone Lock (F13) ....................................... 50
To Unlock the Phone ................................................... 50
To Change the Unlock Code (F14) .............................. 50
Display Features ................................................. 51
Own Telephone Number Display (F21)........................ 51
Backlight Control (Standby) (F22-1) ............................ 51
Backlight Control (In-Use) (F22-2) .............................. 52
Auto Hyphenation (F23) .............................................. 52
SMS Text Lines Selection (F24) .................................. 52
Contrast Control (F25)................................................. 52
Software Version Review (F26) ................................... 53
Last Rescan SID Indicator (F27) ................................. 53
PRL ID Review (F28)................................................... 53
3
Volume and Tone Controls ................................. 54
Alert Tone Volume Control (F31) ................................. 54
Ring Type Selection (F32) ........................................... 54
Key Tone Volume Control (F33) ................................... 54
To Mute a Phone Conversation (F34).......................... 55
Sending DTMF (F35)................................................... 55
Setting Tones (F36) ..................................................... 55
Key Tone Length (F36-1) ............................................. 55
Single Alert Beep Tone (F36-2) ................................... 56
Voice Mail Alert (F36-3) ............................................... 56
Text Message Alert (F36-4) ......................................... 56
Caller ID Alert (F36-5) ................................................. 56
Service Mode Alert (F36-6) ......................................... 57
Voice Privacy Alert (F36-7).......................................... 57
One Minute Beep Tone (F36-8) ................................... 57
Low Battery Alarm (F36-9) .......................................... 57
Call Timers........................................................... 58
Last Call Timer (F41-1)................................................ 58
Outgoing Call Timer (F41-2) ........................................ 58
All Calls Timer (F41-3)................................................. 58
Lifetime Timer (F41-4) ................................................. 58
Clock Indicator (F42) ................................................... 58
System Features ................................................. 59
A/B System Selection (F51) ........................................ 59
Enhanced Roaming ..................................................... 59
NAM Selection (F52) ................................................... 60
Force Analog Call (F53) .............................................. 60
System Settings (F54) ................................................. 61
NAM Name Display (F54-1) ........................................ 61
Automatic NAM (F54-2) ............................................... 61
Automatic Retry (F54-3) .............................................. 61
Enhanced Voice Privacy Service (F54-4) .................... 62
Anti Fraud Security Features ....................................... 62
To Place a Call with the Manual PIN Entry .................. 63
To Place a Call with the Automatic PIN Feature .......... 63
To Place a Call to Voice Mail
using the Automatic PIN Feature ............................. 63
To Turn the Automatic PIN Feature On/Off (F54-5) ..... 63
To Program or Change your Automatic PIN (F54-6) ... 64
Security Features................................................ 64
Call Restriction (F61)................................................... 64
To Change Emergency Numbers (F62)....................... 65
To Turn On/Off OneTouch Emergency
Call Feature (F63) ................................................... 65
To Change the Security Code (F64) ............................ 65
Reset Functions (F65) ................................................. 66
Call Timer Reset (F65-1) ............................................. 66
Phonebook All Clear (F65-2) ....................................... 66
Call History All Clear (F65-3)....................................... 66
Text Message & Voice Mail All Clear (F65-4) .............. 67
Function Reset (F65-5) ............................................... 67
Other Functions .................................................. 67
Quick Dialing (F01) ...................................................... 67
Automatic Answering (F02) ......................................... 67
Function Reset Status........................................ 68
INDEX ..............................................................71
WARNING........................................................72
12 MONTH LIMITED WARRANTY..................73
Quick Reference.............................................75
ACCESSORIES ...............................................77
Touch Tone™ is a registered trade mark of AT & T.
4
AAUUDDIIOOVVOOXX
CCDDMM--44000000//CCDDMM--44000000XXLL
Dual Mode CDMA/AMPS
Handheld Portable
Cellular Telephone
Congratulations...You have just purchased one of
the most advanced cellular telephones in the market
today. Your new Audiovox portable telephone is a dual
mode cellular telephone operating in both the standard
analog and the CDMA “digital” modes.
CDMA technology is a superior digital technology that
greatly increases the quality and capacity of the cellu-
lar system and will provide you with enhanced features
and services. Among the many additional benefits your
new Audiovox portable phone will provide while operat-
ing in the digital mode are, superior voice quality, in-
creased talk and standby times and enhanced privacy.
Your new Audiovox dual mode cellular telephone com-
bines all the advantages of CDMA digital technology
along with Audiovox innovative engineering into a small,
attractive unit that is very easy to use.
The Audiovox CDM-4000/CDM-4000XL is packed with
advanced features that provide you with the ultimate in
convenience and performance such as a full dot matrix
LCD display, 99 dual-number alpha numeric memory
locations, a user friendly multi-function key, as well as
a one touch voice mail access key.
Other feature highlights include one touch emergency
dialing, caller ID with name display, 10 number storage
each for incoming and outgoing calls, text messaging
and voice mail notification.
Optional accessories include an extended lithium ion
battery, a hands free car kit, a cigarette lighter charger
and an earphone/microphone. A leather carrying case
is also available.
And of course, your new Audiovox Dual Mode cellular
telephone comes with something only an Audiovox
phone can provide.The proven reliability that has made
Audiovox one of the world’s leading suppliers of cellu-
lar communications equipment.
Please take a few moments to read the following pages
of this user’s operation manual. It will help you make
the most efficient use of this valuable communications
tool.
5
SSAAFFEETTYY IINNFFOORRMMAATTIIOONN FFOORR
WWIIRREELLEESSSS HHAANNDDHHEELLDD PPHHOONNEESS
Read this information before using your
handheld portable Cellular Telephone.
EXPOSURE TO RADIO FREQUENCY SIGNALS
Your wireless handheld portable telephone is a low
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) sig-
nals.
In August, 1996, the Federal Communications Commis-
sion (FCC) adopted RF exposure guidelines with safety
levels for handheld wireless phones. Those guidelines
are consistent with the safety standards previously set
by both U.S. and international standards bodies:
ANSI C95.1 (1992)
NCRP Report 88 (1986)
ICNIRP (1996)
*
*
*
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific literature.
For example, over 120 scientists, engineers, and physi-
cians from universities, government health agencies,
and industry reviewed the available body of research to
develop the ANSI Standard (C95.1).The design of your
phone complies with the FCC guidelines (and those
standards).
ANTENNA CARE
Use only the supplied or an approved replacement an-
tenna. Unauthorized antennas, modifications, or attach-
ments could damage the phone and may violate FCC
regulations.
PHONE OPERATION
Normal Position: Hold the phone as you would any
other telephone with the antenna pointed up and over
your shoulder.
The meanings of the acronyms are:
*
ANSI : American National Standards Institute
NCRP : National Council on Radiation Protection
and Measurements
ICNIRP: International Commission on Nonionizing
Radiation Protection
6
Tips on Efficient Operation:
For your phone to operate most efficiently:
•
•
Extend your antenna fully.
Do not touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
DRIVING
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey
them. Also, if using your phone while driving, please:
•
Give full attention to driving — driving safely is your
first responsibility.
•
•
Use handsfree operation, if available.
Pull off the road and park before making or answer-
ing a call if driving conditions so require.
ELECTRONIC DEVICES
Most modern electronic equipment is shielded from RF sig-
nals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone.
Pacemakers
The health Industry Manufacturers Association recom-
mends that a minimum separation of six (6”) inches be
maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the pace-
maker.These recommendations are consistent with the
independent research by and recommendations ofWire-
less Technology Research.
Persons with pacemakers:
Should ALWAYS keep the phone more than six
(6”) inches from their pacemaker when the
phone is turned ON.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to
minimize the potential for interference.
If you have any reason to suspect that interfer-
ence is taking place, turn your phone OFF im-
mediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your service provider [or call the cus-
tomer service line to discuss alternatives.]
7
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are ad-
equately shielded from external RF energy.Your physician
may be able to assist you in obtaining this information.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles.Check with
the manufacturer or its representative regarding your
vehicle.You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted no-
tices so require.
AIRCRAFT
FCC regulations prohibit using your phone while in the
air. Switch OFF your phone before boarding an aircraft.
BLASTING AREAS
To avoid interfering with blasting operations, turn your
phone OFF when in a “Blasting area” or in areas posted
“Turn off two-way radio”.Obey all signs and instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn your phone OFF when in any area with a poten-
tially explosive atmosphere and obey all signs and in-
structions. Sparks in such areas could cause an explo-
sion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are of-
ten but not always clearly marked.They include fueling
areas such as gasoline stations, below deck on boats,
fuel or chemical transfer or storage vehicles using liq-
uefied petroleum gas (such as propane or butane), ar-
eas where the air contains chemicals or particles, such
as: grain, dust, or metal powders, and any other area
where you would normally be advised to turn off your
vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place ob-
jects, including both installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
injury could result.
8
PPRREECCAAUUTTIIOONNSS
Your Handheld Portable Telephone is a high quality
piece of equipment. Before operating the equipment,
read all instructions and cautionary markings on (1) AC
Adapter, (2) Battery and (3) Product using Battery.
1. DO NOT use this equipment in an extreme
environment where high temperature or
high humidity exists.
2. DO NOT abuse the equipment. Avoid strik-
ing, shaking or shocking. When not using
the unit, lay down the unit to avoid possible
damage due to instability.
3. DO NOT expose this equipment to rain or
spilled beverages.
4. DO NOT use unauthorized accessories.
5. DO NOT disassemble the phone or its ac-
cessories;If service or repair is required,
return the unit to an authorized Audiovox
cellular service center. If the unit is disas-
sembled, the risk of electric shock or fire
may result.
6. To prevent injury or burns, DO NOT allow
metal objects to contact or short circuit the
battery terminals.
7. DO NOT open the battery case. If the bat-
tery is accidentally broken, avoid skin con-
tact with the internal chemical contents. If
there is skin contact, wash the affected area
immediately and seek medical advice.
8. DO NOT put the battery close to, nor dis-
pose it into fire.
9. The product that you have purchased con-
tains a rechargeable Battery. At the end of
its useful life, under various state and local
laws, it may be illegal to dispose of this
Battery into the municipal waste stream.
Check with your local solid waste officials
for proper disposal procedures in your area.
9
SSYYSSTTEEMMCCOONNFFIIGGUURRAATTIIOONN
System configuration and the equipment list are as
shown below.
Retractable
Whip Antenna
5
Wrist Strap
1
Handheld Portable
Telephone
2
Battery Pack
4
AC Adapter
3
Desktop Holder
List of Equipment
No.
Name of the Equipment
1
Handheld Portable Telephone
2
Slim Lithium Ion Battery Pack (BTR-4000)
Desktop Holder (DTH-4000)
AC Adapter (CNR-4000)
Wrist Strap
3
4
5
10
WRIST STRAP ATTACHMENT
Attach the wrist strap to the phone through the strap
1
hole as shown below
.
Then put the long loop through the smaller loop as
2
shown below
.
1
2
11
BBAATTTTEERRYYIINNSSTTAALLLLAATTIIOONN
AANNDDRREECCHHAARRGGIINNGG
To Attach the Battery Pack
1
Insert the hook at the end of the Battery Pack into
the slot at the end of the phone.
2
Press the Battery Pack down to lock the Battery Pack
onto the phone.
2
1
To Detach the Battery Pack
1
Slide back the Release Latch as shown below.
2
Lift up to remove the Battery Pack from the phone
gently.
1
2
Release Latch
To Recharge Battery
Your CDM-4000 has a built-in charger function. To re-
charge the Battery Pack, always install the Battery Pack
to the Phone.
1. Attach the Battery Pack to the Phone.
2. Insert the DC plug of the AC Adapter (CNR-4000)
to the Desktop Holder (DTH-4000). Plug the AC
Adapter to AC outlet.
3. Place the Phone with Battery Pack into the Desk-
top Holder.
12
4. Then the recharging starts. The display indicates
“now charging” with animation. You can see a
battery level indicator scroll-
ing at the upper-right of the
display.
5. For complete recharging, it
is recommended that the phone is turned off dur-
ing recharging.
6. When the recharging is completed, the display
indicates “fully charged”.
7. It is normal that Battery Pack may become a little
warmer during recharging.
The recharging time, from empty to full, depends on
the environmental temperature, 0 to +35°C.
Battery Type
Recharging Time
1.5 to 2 h
Slim Lithium Ion (BTR-4000)
Extended Lithium Ion (BTE-4000)
2.5 to 3.5 h
AC Adapter
Desktop Holder
Alternatively you can recharge the Phone using AC
Adapter as illustrated below.
AC Adapter
Note: Do not feed the power to the Phone without Bat-
tery Pack.
13
FFUUNNCCTTIIOONNSS
External View
Retractable
Whip Antenna
Power
Indicator
Receiving
Signal
Strength
Indicator
Incoming Call
Indicator
Digital
Mode
Indicator
IN USE
Indicator
Earpiece
Earphone
Mic Jack
Roaming
Indicator
Data
Connector
IN USE
Rm
Message
Indicator
Graphic
Display
Battery Level
Indicator
End Key with
Power On/Off
Send Key
Store Key
Clear Key
STO
CLR
Message
Access Key
Voice Mail
Access Key
Rcl
F
V
OneTouch
Emergency Key
Multi Function
Key
DEF
MNO
WXYZ
ABC
JKL
TUV
OPER
1
4
7
3
6
9
2
5
8
0
Up-arrow
Recall
GHI
Digit Keys
PQRS
Function
Down-arrow
DC
Power Jack
Microphone
14
Function of Keys
Digit Keys
DEF
MNO
WXYZ
To enter Telephone Numbers, Names
ABC
JKL
TUV
OPER
1
4
7
3
6
9
2
5
8
0
or special characters ( or ).
GHI
1
is also used for OneTouch
PQRS
Emergency feature.
Function Keys
STO
CLR
Rcl
F
V
SEND key. To originate or receive a Call.
END key. To terminate a Call and to turn
the phone ON/OFF.
To recall phone numbers from memory.
Also used as Left-arrow key.
Rcl
To be used with other keys to activate
various special features. Also used as
Right-arrow key.
F
To control Earpiece audio level, Alert Tone
and Key Tone.
Also used as Up/Down-arrow keys.
To store phone numbers in memory.
STO
To clear digits from the display or from a
memory location.
CLR
To review Text Messages or to learn how
many Voice Messages are in your Voice
Mailbox.
To access your Voice Mail with only one
key.
V
LCD Display Indication
Items
Descriptions
Receiving Signal Strength Indicator.
The number of lines indicates the received
Signal Strength, and
POWER ON Indicator.
is also used as a
Digital Mode Indicator. To indicate the
phone is operating in digital mode.
A Call is in progress.
IN USE
The phone is out of the Home-Area.
Rm
Message Indicator. To indicate that Text
Messages are stored in memory or Voice
Messages are in your Voice Mailbox.
Battery Level Indicator.
Monitors the battery charge condition.
Graphic full-dot matrix display with flexible
font size in 2 to 4 lines.
15
GGEETTTTIINNGGSSTTAARRTTEEDD
Turning the Phone On/Off
Press
for more than one second. All the indicators
and the digit display will light momentarily, and a tone will
be heard. The indicator
turned on.
will stay while the phone is
for more than one sec-
To turn the phone off, press
ond.
Antenna Position
The antenna can be used in its fully extended or fully re-
tracted position only. It is recommended that the antenna
should be fully extended for optimum performance and
signal strength or while operating in poor signal areas.
Receiving Signal Strength Indicator (
)
The number of lines indicates the Signal Strength in
your area. Four lines show the maximum level.The dis-
play will vary as you move with the phone. If the signal
is not strong enough to place a call, “No Service” will
appear on the LCD display.
Battery Level Indicator
You can always monitor the battery charge condition
with the constant battery level indicator.The number of
blocks indicates the battery conditions as follows:
Full charge
Low charge
Flashing indicates discharged.
Power Management
Talk Time
up to
Standby Time
Battery
Mode
up to
Slim Battery CDMA
(BTR-4000) Analog
190 min.
65 min.
170 h
12 h
Extended
CDMA
380 min.
130 min.
340 h
24 h
(BTE-4000) Analog
The operating times are approximate values and may
vary depending on network configuration and handset
usage.
16
BBAASSIICCOOPPEERRAATTIIOONN
Placing Calls
To Place a Call
1. Enter the phone number.
(A maximum of 32 digits will
be displayed.)
2. Press
.
IN USE
IN USE
The
indicator will light.
• To Correct a Number
Press CLR to clear the last digit.
Press and hold
to erase all the digits entered.
CLR
• If the Call Fails to Go Through
Press
, and
to redial the number.
To Terminate a Call
IN USE
Press
. The
indicator will go out.
Last Number Redial
Rcl
Press
to recall the last number you dialed,
then press
.
See Call History on page 40 for details.
To Dial the Last Number Received
Rcl
Press
to dial the last number with Caller ID
you received, then press
.
See Call History on page 40 for details.
Phonebook Dialing
Rcl
Press
and enter an address (01 to 99) to recall a
number from your phonebook, then press
See Phonebook Recall on page 31 for details.
.
To Mute a Phone Conversation
F
F
Press
to mute your conversation at any time
during a call. “Mute” will be displayed.
To return to normal conversation, press
again.
F
F
17
Speed Dialing
If you know the phonebook address of the telephone
number that you want to call, you may place a call with-
Rcl
out using
.
1. Enter the one or two digits of your Phonebook ad-
dress (1 ~ 9 or 10 ~ 99).
2. Press
.The phone number will be displayed.
indicator will light, and the call will be
IN USE
The
placed.
Note: If two telephone numbers are stored in the ad-
dress, the Primary Number will be dialed.
Quick Dialing
When this feature is on, the Primary number in your
Phonebook address 02 to 09 can be dialed with just
one push of the key. See Quick Dialing (F01) on page
67 to turn this feature on/off.
ABC
WXYZ
1. Press a digit key (
second.
to
) for more than one
2
9
2. The number in your phonebook is automatically
dialed. The phone number will be displayed. The
IN USE
indicator will light.
Note: The key is not for Quick Dialing, but for One
Touch Emergency Call, page 19.
1
Emergency Call
This feature permits you to place an emergency call even
if your telephone is in “Phone Lock”, “Keypad Lock” or
“Restrict”mode.Up to 3 numbers can be programmed as
Emergency numbers.The emergency numbers“911”and
“ 911” are already preprogrammed. See To Change
Emergency Numbers (F62) on page 65.
Example: To Call 911 in “Phone Lock” or “Key-
pad Lock” mode.
WXYZ
1. Enter
.The “911” will not be dis-
9
1
1
played, but “Phone Lock” or “Keypad Lock” will
be displayed.
2. Press
.
IN USE
The “911” will be displayed.
IN USE
The
indicator will light,
and the call will be placed.
18
OneTouch Emergency Call
This feature permits you to dial an emergency number
by a single key stroke, even in the “Phone Lock” or
“Restrict” mode. This feature can be turned off to pre-
vent unintentional calls to the emergency number.
See To Turn On/Off OneTouch Emergency Call Fea-
ture (F63) on page 65.
1. Press and hold
for more than 2 seconds.The
1
number in emergency memory location “1” will be
dialed.
IN USE
2. Then the
indicator will light, and the call will
be placed. (The factory preset number is “911”.)
Note: This feature cannot be used if the Keypad Lock
is on.You need to dial all the digits and
.
Receiving Calls
To Receive a Call
When the telephone rings, press
to answer the
IN USE
call. The
indicator will light.
Any Key Answering
This feature permits you to answer an incoming call by
Rcl
F
pressing any key on the key pad except
and
.
Caller ID with Name
This feature allows you to preview in your display the
number and name of the party calling you before you
answer the call. The name is as you programmed it in
your phonebook.
1. When the phone rings, the
Calling Number appears
in the display.
2. The last 10 Caller IDs are stored in the memory
for your review and redial. See Call History on
page 40 for details.
Note: “Number Restricted” or “Number Unavailable”
is displayed when the Caller ID is restricted or
not available.
19
Automatic Calls-in-Absence Indicator
This feature indicates the number of unanswered in-
coming calls. If incoming calls are not answered, the
LCD display will indicate “Called XX”. “XX” is the num-
ber of calls (01 to 99) missed.
Example:
Depressing any key will clear the number of calls indi-
cated in the display.
Ringing Tone with Melody
The CDM-4000 offers you 15 styles of ringer tones and
melodies for alerting incoming calls. Ringer volume can
also be adjusted. See Ring Type Selection (F32) and
AlertToneVolume Control (F31) on page 54 for setting.
Distinctive Ringing (Audible Caller ID)
You may program different ringer styles for different
phonebook addresses. See To Store a RingType with
the Phone Number on page 29 for setting.
During Calls
To Adjust the Earpiece Volume
Simply press
or
to
adjust Earpiece Volume during
a call.
Scratch Pad Dialing
If you enter a telephone number during a call, the num-
ber will be stored in the Scratch Pad memory. After
terminating the call, the number you entered can be
dialed by
.
Note: You can deactivate “Sending DTMF” so that key-
pad tones will not be transmitted to the calling
party. See Sending DTMF (F35) on page 55.
To Send Touch Tone™ Signals
When Sending DTMF (page 55) mode is on, the num-
bers will be sent in TouchTone™ signals during a call
WXYZ
OPER
as you press digit keys,
through
,
,
1
9
0
and
.
20
For more information, see End to End Signaling on
page 22.
Automatic Talk Timer
The talk time of the current call will be automatically
displayed.
Example:
Call Waiting
Your service provider may provide Call Waiting service.
When you are on a call, you may hear beep tone alert-
ing you of another incoming call. Your phone displays
“New Caller” and the new caller’s ID with the name.The
name is as you programmed it in your phonebook.
1. Press
2. Press
to answer the new call.
again to switch between the two calls.
Three-Way Calling
Your service provider may provide Three-Way Calling
service. When a call is already in progress, you may
call the third party.
1. Enter a number and press
party.
to call the third
2. Press
again to connect all three parties.
Ask your service provider for the detailed information.
Standby
Clock Indicator (Digital Mode Only)
When the phone is in an area with digital service (Digi-
tal Mode), Date and Time are automatically displayed,
if this feature is enabled. See Clock Indicator (F42) on
page 58 to turn this feature on/off.
Example:
Notes: 1. During Digital Mode, the
indicator lights.
2. During Analog Mode, or while “No Service”
is indicated, the time display is not available
even if this feature is enabled.
21
End to End Signaling
To utilize certain phone services, such as accessing an
alternate long distance network, signaling a pager or
banking by phone etc., Touch Tone™ signaling is re-
quired. The following features will make it easy to send
frequently used Touch Tone™ signals. See Link Dial-
ing on page 38 for more information.
Touch Tone™ from Display
When Sending DTMF (page 55) mode is on, the num-
bers will be sent in TouchTone™ signals during a call
as you press digit keys. When Sending DTMF mode is
off, you can send TouchTone™ signals in the following
manner.
1. Enter the number.
F
2. Press
“TONE”.
and scroll to
F
3. Press
. The number in the display will be
sent in Touch Tone™ signals.
Touch Tone™ from Memory
Touch Tone™ signals can be sent from memory during
a call.
Rcl
1. Press
, and recall the
number you want to send
in Touch Tone™ signals.
F
2. Press
“TONE”.
and scroll to
F
3. Press
. The number in the display will be
sent in Touch Tone™ signals.
22
PPHHOONNEEBBOOOOKK OOPPEERRAATTIIOONN
Your phone has an Enhanced Phonebook with 99 dual-
number memory addresses. At each address, you can
store up to two telephone numbers under one name.
This feature allows you to store, under one name, a
person’s home and office number, office and mobile
number, etc. Stored numbers can be easily recalled and
dialed by pressing
. Numbers can also be marked
Secret for added privacy.
Number of Digits per Phonebook Address
Single Number or
Dual Numbers
Address
Linked Numbers
01 to 90 Up to 32 digits
91 to 99 Up to 32 digits
Up to 40 digits
Up to 80 digits
Includes Dual Mark
Includes Link Marks
Note
and Manual Hyphens and Manual Hyphens
Phonebook Entry
To program your phonebook, enter the information in
the following order. You may skip “Name” and/or “Op-
tion”.
CLR
STO
STO
Number
Name
Option Address
To Store a Number without Name
1. Press CLR , then enter the phone number.
2. Press
, then enter the desired memory
STO STO
address (01 through 99).
Example: To store the phone number 1 2 3 4 5 6 7
8 9 0 in address 07.
1. Press CLR
.
ABC
PQRS
DEF
TUV
GHI
2. Enter
1
2
7
3
8
4
9
JKL
MNO
WXYZ
5
6
OPER
.
0
3. Press
.
STO STO
OPER
PQRS
4. Enter
.
0
7
23
Overwrite Warning
When you attempt to store a number in an address
where another number has been already stored, you
will have “OVERWRITE” warning.
Example: To store the number 9 8 7 6 5 4 3 2 1 0
in the address 07, where another num-
ber 1 2 3 4 5 6 7 8 9 0 is already stored.
1. Press CLR
.
WXYZ
TUV
PQRS
MNO
2. Enter
9
8
7
6
1
JKL
GHI
DEF
ABC
5
4
3
2
OPER
.
0
3. Press
.
STO STO
OPER
PQRS
4. Enter
.
0
7
The already stored number
is displayed momentarily.
5. Two seconds later.
6. If you accept to overwrite, scroll to “YES” and
F
Press
.
7. If you do not want to overwrite, scroll to “NO”
F
and press
3 again.
. The screen returns to the step
Auto Hyphenation
With this feature on, hyphens are automatically inserted
when you enter telephone numbers and when you re-
call the numbers from the Phonebook. See Auto Hy-
phenation (F23) on page 52 to activate or deactivate
this feature.
Length of Number
10 digits or less
Display Example
123-456-7890
11 to 21 digits
1-234-567-89012
No hyphens
22 digits or more
Note: When you manually insert hyphens, the “Auto
Hyphenation” feature will not work for that par-
ticular number.
24
Manual Hyphenation
You can manually insert a hyphen at any place when
you enter a telephone number. The maximum number
is 32 digits long including hyphens.
Example: To insert a hyphen in the number 1 2 3
4 5 6 7 to display it as 123-4567.
1. Press
2. Enter
.
CLR
ABC
DEF
.
1
2
3
F
3. Press
and scroll to
“HYPHEN”.
F
4. Press
.
GHI
JKL
MNO
PQRS
5. Enter
.
4
5
6
7
Automatic Storing into Phonebook
This feature allows convenient automatic storing into a
vacant phonebook address.
The number will be stored in the first available memory
address which will be indicated in the display.This fea-
ture can prevent the possible overwriting of a previously
stored number.
1. Enter the phone number.
2. Press
.
STO STO STO
Example: To store the phone number 1 2 3 4 5 6 7 8
9 0 into a vacant memory address 04.
1. Press
2. Enter
.
CLR
ABC
PQRS
DEF
TUV
GHI
1
2
3
8
4
9
JKL
MNO
WXYZ
5
6
7
OPER
.
0
3. Press STO STO
.
25
4. Press
.
STO
To Store Dual Numbers in Phonebook
You can store Dual Numbers with Dual Mark “ \ ” up to
32 digits for all the address 01 to 99 in the phonebook.
Up to 32 digits
Primary Number
\
Secondary Number
To store two telephone numbers in one phonebook ad-
dress, enter the first number, select the Dual Mark “ \ ”
by using Menu, then enter the second number.
Example: To store the primary number 1 2 3 4 5 6
7 8 9 0 and the secondary number 9 8 7
6 5 4 3 2 1 0 in address 08.
1. Press
2. Enter
.
CLR
ABC
PQRS
DEF
TUV
GHI
1
2
7
3
8
4
9
JKL
MNO
WXYZ
5
6
OPER
.
0
F
3. Press
and scroll to
“DUAL MARK”.
F
4. Press
.
The Dual Mark “ \ ” is in-
serted.
WXYZ
TUV
PQRS
MNO
5. Enter
9
8
7
6
1
JKL
GHI
DEF
ABC
5
4
3
2
OPER
.
0
6. Press
.
STO STO
OPER
TUV
7. Enter
.
0
8
Note: You can add a second number after storing a
first number. See To Enter a Second Number
on page 34.
26
To Store a Name with the Phone Number
To use this procedure, you will need to refer to “Alpha
Mode” below.
1. Enter the phone number.
2. Press
to select the Alpha Mode.
STO
3. Enter the name.
4. Press , then enter the memory address (01
STO
through 99) to store the number with the name
into memory.
Example: To store the phone number 1 2 3 4 5 6 7
8 9 0 with the name Mr. JACKSON into
memory address 11.
1. Enter the phone number;
ABC
DEF
GHI
JKL
1
6
2
7
3
4
5
MNO
PQRS
TUV
WXYZ
OPER
.
8
9
0
2. Set Alpha Mode;
STO
3. Enter the Name;
MNO
for “M”,
6
PQRS
PQRS
PQRS
for “r”,
V
7
7
7
F
MNO
JKL
ABC
JKL
for “.”,
for “J”,
for
6
V
5
2
5
ABC
ABC
ABC
JKL
“A”,
for “C”,
for “K”,
2
2
7
2
5
F
PQRS
PQRS
PQRS
PQRS
MNO
MNO
MNO
for“S”,
7
7
7
6
6
6
MNO
MNO
for “O”, and
for “N”.
6
6
4. Press STO
.
5. Enter
.
1
1
Alpha Mode
You can add an identifying name (“Alpha Tag” up to 2
lines or 20 to 24 characters) to the phone numbers at
each phonebook address.
To Enter Names using Alpha (Letters)
1. Press
2. Press
, then enter the phone number.
.
CLR
STO
27
3. Press digit key repeatedly to display the letter that
you want. The following table shows which char-
acter is assigned with each digit key.For example,
DEF
to enter the letter “D”, press
once. For the
3
DEF
letter “F”, press
3 times.
3
Assigned Alpha Characters
Key
1 press 2 press 3 press 4 press 5 press
1
Blank
A / a
D / d
G / g
J / j
1
2 ABC
3 DEF
4 GHI
B / b
E / e
H / h
K / k
N / n
Q / q
U / u
X / x
C / c
F / f
I / i
2
3
4
5 JKL
L / l
5
6 MNO
7 PQRS
8 TUV
M / m
P / p
T / t
O / o
R / r
V / v
Y / y
6
S / s
8
7
9
9 WXYZ
0 OPER
W / w
0
Z / z
4. To change from upper to lower case characters
or vice versa, press during entry of Alpha.
5. To enter special characters, press or
V
and a digit key to select characters from the table
below.
Assigned Special Characters
1
4
7
!
2
5
8
?
-
3
6
9
_
.
1
4
7
(
<
”
2
5
8
)
>
’
3
6
9
:
+
&
#
/
=
6. If you make a mistake, press
to erase the
CLR
last character. Press and hold CLR to erase all
the characters on the display.
F
7. Press
to move the cursor, which inserts a
blank space after the last character.
Rcl
8. Press
characters.
9. To exit the Alpha Mode, press
to move the cursor back to insert new
.
Note: You must enter the phone number first, then add
the name. Entering a number after the name will
erase the name.
28
To Store a Ring Type with the Phone Number
(Distinctive Ringing)
You can choose one of 15 ring types for each phonebook
address. With this feature, you will be able to distin-
guish who is calling by hearing the ringing tone. The
ring type is selected while storing the number when the
word “OPTION” appears.
Example: To store a number with Ring Type #02
in the address 12.
1. Enter the phone number,
and press STO STO
.
F
2. Press
and scroll to
“RING TYPE”.
F
3. Press
and scroll to
one of the numbers, which
you want to set.
F
4. Press
and scroll to
sample the different ring
types.
F
5. Press
ring type.
to set the new
ABC
6. Press
.
1
2
Notes: 1. If you have one number only, the step 3 is
skipped.
2. The “COMMON” shown in the step 4 is the
ring type you selected with the Function
Menu. See Ring Type Selection (F32) on
page 54.
29
Recall Menu
Rcl
Press
key. The following “RECALL” menu will
prompt you to recall the number
from the memory.
• “ADDRESS” : Phonebook Address Mode
• “SEARCH” :
Phonebook Sort Scroll Mode or
Phonebook KeyWord Search Mode
Call History Mode
• “HISTORY” :
Recall Menu Tree
Main Menu
Sub-menu
Phone-
book
VIEW TEL#
VIEW NAME
MODIFY
ADDRESS
MOVE
PRI. CHANGE
ERASE
(Sort Scroll)
(Key Word)
SEARCH
HISTORY
Outgoing
History
OUTGOING
VIEW TEL#
VIEW NAME
SAVE
ERASE
Incoming
History
INCOMING
VIEW TEL#
VIEW NAME
SAVE
ERASE
Scratch
Pad
SCRATCHPAD
VIEW TEL#
SAVE
ERASE
Note: The submenu “PRI.CHANGE” will be available
only when two telephone numbers are strored
in that address.
30
Phonebook Recall
To recall the numbers stored in your phonebook, you
have three methods: Address Mode, Sort Scroll Mode
and Key Word Search Mode.
Phonebook Address Mode
This mode is useful in finding a phone number by re-
calling a specific address or by scrolling the Phonebook.
Rcl
1. Press
.
2. Enter the two-digit Memory
Address.
3. Press
or
to scroll.
Note: The scroll feature will skip any vacant memory
address(es).
Phonebook Sort Scroll Mode
This mode sorts and displays, in alphabetical order, tele-
phone numbers stored with “AlphaTags” (Names).Blank
digits on top will be disregarded for scroll.
Example: To display the numbers stored in the
memory alphabetically from “J”.
Rcl
1. Press
2. Press
3. Press
4. Press
5. Press
.
JKL
for “J”.
5
F
.
.
.
Note: When the Alpha Tag is 2 lines long, only the Al-
pha Tag is displayed without the telephone num-
ber. However, a call can still be made by simply
pressing
.
31
Phonebook Key Word Search Mode
This mode searches and displays the character string
of Alpha Tags stored in the Phonebook. Any part of the
Alpha Tag can be used for the search.
Example: To search the character string AN stored
in the Phonebook.
Rcl
1. Press
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
8. Press
.
for “A”.
MNO
ABC
MNO
F
2
6
for “N”.
6
.
.
.
.
.
Notes: 1. The key word can be searched regardless
of upper or lower case letters.
2. When the Alpha Tag is 2 lines long, only the
AlphaTag is displayed without the telephone
number. However, a call can be made by
simply pressing
.
32
To Dial Dual Numbers
After the number is recalled in the display, it can be
easily called by pressing
.
• To dial the primary number, just press
• To dial the secondary number, press
.
.
Primary Number
Secondary Number
To Review Long Numbers
This feature allows you to review all the digits of very
long numbers or numbers stored with Alpha Tags.
1. Use any of the previously described Phonebook
search modes to recall a number.
F
2. Press
and scroll to “VIEW TEL#”, and the
entire digits of the number will be displayed.
To Review Long Names
This feature allows you to review whole Alpha Name
Tag stored with dual numbers.
1. Use any of the previously described Phonebook
search modes to recall a number.
F
2. Press
and scroll to “VIEW NAME”. Press
F
again, and all the characters of the Name
will be displayed.
Prepending Dialing
This feature will be convenient when you need to add
an area code to the number in the phonebook.
Example: To add 1 2 3 to a number 4 5 6 7 8 9 0.
1. Recall the number.
ABC
DEF
2. Enter
3. Press
.
1
2
3
. Then the call is placed to 123-
4567890.
Note: The added digits will not be stored in the phone-
book memory.
33
Phonebook Edit
This section guides you how to modify, move, change
priority and erase the phonebook contents.
To Modify Numbers and Names
You can modify any of the phonebook contents you have
stored, including Phone Numbers, Names, Ring Type,
Secret and Address.
To Modify Phone Numbers
Recall the number from the phonebook.
F
Press
to select “MENU”, then scroll to “MODIFY”
F
and press
. Enter the new digit(s) and delete the
CLR
old digit(s) by pressing
to left,
. To move the cursor, press
to right.
To Modify Alpha Name Tag
Recall the number and proceed to “MODIFY” as above.
Press STO , and the NameTag will appear by itself.Press
CLR
to clear the letter(s), and enter the new Name.
To Modify Address
After you modified number/name, just press STO with-
out entering new address, and the current phonebook
address will be overwritten. If you enter a new address,
and press STO , the modified number/name will be cop-
ied to the new address, while the original address will
remain unchanged.
To Enter a Second Number
Example: To add the secondary number 9 8 7 6 5
4 3 2 1 0 in the address 07.
1. Recall the number stored
in the memory address 07.
F
2. Press
and scroll to
“MODIFY”.
F
3. Press
.
F
4. Press
and scroll to
“DUAL MARK”.
34
F
5. Press
.
The Dual Mark “ \ ” is in-
serted.
WXYZ
TUV
PQRS
MNO
6. Enter
9
8
7
6
1
JKL
GHI
DEF
ABC
5
4
3
2
OPER
.
0
7. Press
.
STO STO
8. Press
.
STO
The original number is dis-
played momentarily.
9. Two seconds later.
F
10.Press
to store in the
original address.
To Move Numbers and Names
You can move the phonebook contents to a new ad-
dress. The original address will then be erased.
Example: To move the number 1 2 3 4 5 6 7 8 9 0
from the address 20 to 15.
1. Recall the number stored
in the address 20.
F
2. Press
“MOVE”.
and scroll to
F
3. Press
.
JKL
4. Enter
as a new
1
5
address.
35
To Change Priority of Dual Numbers
You can interchange the primary and the secondary
numbers in a phonebook address. The submenu
“PRI.CHANGE” will only be available when two tele-
phone numbers are stored in that address.
Example:
1. Recall the number.
Primary Number
Secondary Number
F
2. Press
and scroll to
“PRI.CHANGE”.
F
3. Press
.
The display shows the sta-
tus after change.
F
4. Press
to decide it.
Note: The primary number will be dialed when you use
Speed Dialing and Quick Dialing features.
To Erase Numbers and Names
This feature erases the number already stored in the
Phonebook.
Example: To erase the number 9 8 7 6 5 4 3 2 1 0
1 2 3 stored in the memory address 16.
1. Recall the number stored
in the memory address 16.
F
2. Press
“ERASE”.
and scroll to
F
3. Press
. The number
is shown again.
4. Two seconds later the
screen is changed.
5. To erase the number scroll to “YES”, otherwise
F
“NO”, and Press
.
36
Secret Memory
To Store a Secret Number
This feature permits you to store a phone number that
you want to keep secret in your phonebook.The secret
number can be accessed only by entering the security
code (see page 49).
Example: To store the phone number 1 2 3 4 5 6 7
8 9 0 in address 30 as a secret number.
1. Press
2. Enter
.
CLR
ABC
PQRS
DEF
TUV
GHI
1
2
7
3
8
4
9
JKL
MNO
WXYZ
5
6
OPER
.
0
3. Press STO STO
.
F
4. Press
and scroll to
“SECRET”.
F
5. Press
.
F
6. Press
to put a mark
“
” on the number to be
secret.
7. Press STO
.
DEF
OPER
8. Enter
to store it.
3
0
To Recall a Secret Number
Example: To recall the number 1 2 3 4 5 6 7 8 9 0
stored in the address 30.
1. Use Phonebook Search
Mode to recall a secret
number.
37
F
2. Press
.
3. Enter the four-digit secu-
F
rity code and press
.
Link Dialing
This feature permits you to link groups of numbers to
be sent in sequence.The linked numbers can be stored
in memory. When dialed, the first group of numbers will
be sent in digital signaling, and the rest of the numbers
will be sent in Touch Tone™ group by group each time
you press
.
To Store Linked Numbers in Phonebook
Linked Numbers can be stored using any of the proce-
dures described under memory operations (at a spe-
cific address, with a Name Tag, at the next vacant
memory location or as secret). The only difference is,
that a Link Mark “ = ”must be entered between the linked
numbers. The link mark is entered using the key se-
F
F
quence
.
You can store Linked Numbers with Link Marks “ = ” up
to 40 digits for the address 01 to 90, and up to 80 digits
for the address 91 to 99 in the phonebook.
Up to 40 or 80 digits
L01
=
L02
=
L03
31 digits or less
31 digits or less
31 digits or less
The example on the next page shows how to store a
Linked number at a specific memory address.
1. Enter the first number.
F
F
2. Press
. A link mark “ = ” will be added
at the end of the number.
3. Enter the second number. If you wish to link addi-
tional number(s), return to 2.
4. Press
, then enter the memory address
STO STO
(01 ~ 99).
38
Example: To link 3 numbers and store in Address 35.
PQRS
GHI
MNO
DEF
1. Enter
7
4
6
3
GHI
PQRS
WXYZ
.
4
7
9
F
2. Press
3. Press
4. Enter
5. Press
6. Press
7. Enter
.
F
.
ABC
DEF
.
1
2
.
3
F
F
.
ABC
DEF
GHI
1
2
7
3
8
4
9
JKL
MNO
PQRS
TUV
WXYZ
5
6
OPER
.
0
DEF
JKL
8. Press
.
STO STO
3
5
Note: While entering a linked number, you may review
all the parts of that number, even those already
entered.
F
Press
, scroll to “VIEW TEL#” and press
F
.The linked numbers you have just entered
will be displayed one by one each time you press
F
.
To Place Calls using Linked Numbers
Rcl
1. Press
, and select the linked number you want
to call. (See Phonebook Recall on page 31.)
IN USE
indicator will light as
2. Press
the first number is dialed.
3. Press . The second linked number will be
. Then the
sent in Touch Tone™ signals. Succeeding num-
bers can be sent sequentially by pressing
again.
39
Call History
This feature recalls outgoing Call History and incoming
Caller ID numbers. This is convenient for redialing re-
cently called numbers or for returning missed calls by
using the stored Caller ID. (See Caller ID with Name
on page 19.)
Call History Memories
Memory
Description
OUTGOING
Last 10 numbers you dialed. Address
01 to 10.
INCOMING
Last 10 numbers you answered or
missed. Address 01 to 10.
SCRATCHPAD Last 3 numbers you wrote during calls.
Address 01 to 03.
You can access the memory in two ways, Scroll and
Shortcut.
By Scrolling
Rcl
1. Press
and scroll to
“HISTORY”.
F
2. Press
and scroll to
the menu item you want.
F
3. Press
to select.
4. To review the numbers in memory, scroll with
or
.
5. After a number is displayed, it can be easily di-
aled, by simply pressing
.
Shortcut:
Rcl
• Press
to display the latest number in the
outgoing history memory.
Rcl
• Press
to display the latest number in the
incoming history memory.
To Review Outgoing Call History
Example: To recall a number from Outgoing History.
Rcl
1. Press
.
The most recent call is dis-
played.
40
2. Scroll with
or
to review other numbers.
3. You can place a call by simply pressing
.
When duplicate numbers are called, only the latest call
is stored in the outgoing call history memory.
To Review Incoming Call History
Example: To recall a received Caller ID from
Memory Stack.
Rcl
1. Press
.
The most recent call is dis-
played.
2. Press
. A time stamp
is shown, if available.
3. Press
.
A name is shown, if avail-
able in your phonebook.
4. You can place a call by
simply pressing
.
In the incoming call history, the calls are marked with “
”
or “ ”. Numbers with “ ” represent calls you missed,
and numbers with “ ”represent calls that you answered.
When duplicate numbers are received, only the latest
call is stored in the incoming call history memory.
To Review Scratch Pad
Example:
Rcl
F
1. Press
F
.
2. Scroll with
bers.
or
to review other num-
3. You can place a call by simply pressing
.
41
To Save a Number to Phonebook
The numbers of Call History and Scratch Pad Memory
can be stored in your phonebook.You can add a name
in the same way as “MODIFY”. See To Modify Num-
bers and Names on page 34.
Example: To save a received Caller ID to Phone-
book.
1. Recall a number.
F
2. Press
“SAVE”.
and scroll to
F
3. Press
.
4. Press STO STO
.
GHI
OPER
5. Enter
dress.
as an ad-
4
0
42
MMEESSSSAAGGIINNGGFFEEAATTUURREESS
Your CDM-4000/CDM-4000XL Audiovox Cellular Tele-
phone has been engineered to operate with the latest
technology that will allow you to enjoy the benefit ofVoice
Mail Notification and Text Messages. Please note that
operation of these features depends on the Cellular Sys-
tem and therefore may not be available in all areas.
Message Indicator
A message indicator
as explained below.
shows you the current status
You have new Text Messages or new Voice
Flashing Mail Notification.
You have Text Messages or Voice Mail
Steady
off
Notification, which you have seen already.
Neither Text Message nor Voice Mail Notifi-
cation.
In addition to the
indicator, whenever your Voice
Mail contains unreviewed messages, you will occasion-
ally hear a short beep as a reminder.
Voice Mail
Voice Mail Notification
Your cellular telephone notifies you when new messages
are in your Voice Mail. When messages are left in your
Voice Mail, the
indicator at the upper right of the
display flashes to alert you.
Normal Voice Mail Notification
When your phone is notified by the cellular system that
there are messages in your Voice Mail, the following
occurs.
1. The phone sounds a short beep tone.
2. The
indicator at the upper right of the display
flashes to alert you.
The display indicates
“NEW MESSAGE” with
animation.
3. The Phone’s Memory Stack is updated as to the
number of unreviewed messages in yourVoice Mail.
43
Voice Mail Notification with Mail Retrieval Service (MRS)
1. The phone sounds a short
beep tone.
2. Press
to answer the incoming call, your
phone will be connected to your Voice Message
Service so that you may retrieve your messages.
3. If you choose not to answer the incoming call,
“Message Retrieval” will be stored in the stack
for retrieval of your messages at a later time.
To Display the Number of Voice Mail Messages
Example:
1. Press
. A mark “ ” is
flashing, when a new mes-
sage is available.
F
2. Press
to select “VOICE”.
The number of messages
in your Voice Mail will be
displayed.
3. If a Text Message is attached to the Voice Mail
Notification, the Text Message can be reviewed
F
by
. Otherwise this step is skipped.
F
4. Press
.Scroll to“QUIT”
or “ERASE” the notification
you reviewed.
F
5. Press
.
6. To erase the Voice Mail
Notification, scroll to “YES”,
otherwise “NO”, and press
F
.
Voice Mail Dialing
You can store one set of linked numbers in a specially
provided memory, and access these numbers with one
touch of the “Voice Mail Access” key
.
V
44
To Store the Voice Mail Access Number
Please see To Store Linked Numbers in Phonebook
on page 38, and follow the steps 1 ~ 3 to make a set of
linked numbers. Press
to store. Up to 80
STO STO
V
digits of linked numbers can be stored including link
mark “ = ”.You can also add a Name Tag (up to 20 to 24
characters) with your voice mail number. (See To Store
a Name with Phone Number on page 27.)
To Call Your Voice Mail
1. Press and hold
.The first number will be dis-
V
played and dialed.
2. Press .The second number will be displayed
V
and sent in Touch Tone™ signal.
3. The succeeding numbers can be sent sequentially
by pressing
.
V
To Review the Voice Mail Access Number
Rcl
1. Press
Mode.
to select the Phonebook Address
.The first linked number in will be
2. Press
V
V
displayed.
F
3. Press
(one or more times) to display the re-
maining linked numbers in
.
V
Text Messages (Short Message Service)
Your phone is able to receive and display Text Mes-
sages of up to 255 characters long. The Text Message
memory stack can store up to 30 messages. When an
SMS message is received, the following occurs.
1. A short beep tone sounds.
2. The
indicator at the upper right of the display
flashes to alert you.
The display indicates “NEW
MESSAGE” with animation.
3. The Text Message just re-
ceived is stored in the Memory Stack. To review
stored messages, see To Review aText Message
on page 46.
4. If the Memory Stack is full, any newText Messages
will not be stored, and you
will have the display:
45
To Review a Text Message
Text messages are stored in the address 01 to 30 in the
memory stack. The address 01 has the last message.
Every message moves to the next address when a new
message is stored.
Example: To display a Text Message stored in the
Memory Stack.
1. Press
and scroll to
“TEXT”. You have now 10
Text Messages out of 30
memories. A mark “ ” is
flashing, when a new message is available.
F
2. Press
. The first Text
Message is displayed. A
longer message will be au-
tomatically scrolled every 6 seconds.
F
3. Press
or wait for 6
seconds to review an op-
tional information.
F
4. Press
or wait for 6
seconds. If a Callback
Number is displayed, you
can dial it by simply pressing
.
F
5. Press
and scroll
“QUIT” or “ERASE” for the
message that you just re-
viewed.
F
6. Press
to select.
7. To erase the Text Message, scroll to “YES”, oth-
F
erwise “NO”, and press
.
8. To review another message, scroll with
.
or
Notes: New Text Messages are marked with “ ”.Text
Messages you have already reviewed are
marked with “ ”.
46
FFUUNNCCTTIIOONN MMEENNUU
To Access Function Menu
Various phone settings can be changed through Func-
tion Menu to customize your phone’s functions to fit your
convenience. See Function Menu Tree in the follow-
ing page. You can reach the Function you want to ac-
cess in two ways; Scroll and Shortcut.
By Scrolling
F
1. Press
Menu.
to enter Main
2. Scroll with
or
key to the desired item in
the Main Menu.
F
3. Press
to enter the
submenu.
4. Scroll with
or
key to the desired item in
the submenu.
F
5. Press
to enter the function.
By Shortcut
Each Function has its shortcut number for direct ac-
cess.Forexample, to enter the function“RINGTYPE”(F32),
F
DEF
ABC
press
.
3
2
To Exit from Function Menu
• To return from a submenu to the main menu, press
Rcl
.
• To exit from Function Menu, press
.
Notes: 1. A mark “ ” at the right in a menu prompt
you that you can see its detailed items by
F
pressing
2. A mark “
the function.
.
” shows the current setting of
47
Function Menu Tree
Main Menu
Submenu
Branch
1: LOCK
1: KEY LOCK (F11)
2: LOCK (F12)
3: AUTO LOCK (F13)
4: LOCK CODE (F14)
2: DISPLAY
1: MY NUMBER (F21)
2: BACKLIGHT (F22)
1: STANDBY
2: IN-USE
3: HYPHEN
(F23)
4: SMS LINES (F24)
5: CONTRAST (F25)
6: VERSION
7: LAST SID
8: PRL ID
(F26)
(F27)
(F28)
3:TONES
1: RING VOL. (F31)
2: RING TYPE (F32)
3: KEY VOL.
4: MUTE
(F33)
(F34)
5: DTMF SEND (F35)
6: SETTINGS (F36)
1: KEY TONE
2: BEEP ALT.
3: VOICEMAIL
4: TEXT MSG.
5: CALLER ID
6: SERVICE
7: PRIVACY
8: MINUTE
9: LOW BATT.
4:TIMES
1: TIMERS
2: CLOCK
(F41)
(F42)
1: LAST CALL
2: OUTGOING
3: ALL CALLS
4: LIFETIME
5: SYSTEM
1: A/B SW.
(F51)
2: NAM CHG. (F52)
3: ANALOG (F53)
4: SETTINGS (F54)
1: NAM NAME
2: AUTO NAM
3: RETRY
4: PRIVACY
5: AUTO PIN
6: PIN CODE
6: SECURITY
1: RESTRICT (F61)
2: EMER. #
3: [1] EMER.
(F62)
(F63)
4: SEC. CODE (F64)
5: RESET (F65)
1: TIMERS
2: PHONEBOOK
3: HISTORY
4: TXT/VOICE
5: SETTINGS
0: OTHER
1: QUICK DIAL (F01)
2: AUTO ANS. (F02)
3: ABSENCE
(F03)
4: ABS. TIMER (F04)
48
Lock Features
Security Code and Unlock Code
Your phone is equipped with the Security Code and the
Unlock Code to access various security features. You
may change the preset codes for added protection.
Code
Preset
Description
Security 1234
Code
To access Secret Number, to set Call
Restriction, etc.
Unlock 1234
Code
To unlock the Phone
See To Change the Security Code (F64) on page 65.
See To Change the Unlock Code (F14) on page 50.
Keypad Lock (F11)
This mode is useful for preventing inadvertent pressing
of keys. (For example, when the phone is in a purse or
pocket.)
With this feature on, the following functions are still avail-
able.
•
•
Incoming calls can be answered with
.
Programmed emergency numbers can be called.
(Except for OneTouch Emergency Call.)
When this feature is on, the following functions are not
available.
•
•
•
•
•
Automatic Answering
Any Key Answering
OneTouch Emergency Call
Quick Dialing
Turning off the phone by
.
To Activate/Deactivate this Feature:
F
1. Press
to
1
1
activate “Keypad Lock”
mode.
F
2. Press
1
1
again to deactivate.
49
Phone Lock (F12)
This mode is useful to prevent unauthorized use of the
phone. With this feature on, the following functions are
still available.
•
•
•
•
•
Incoming calls can be answered with
Any Key Answering
.
Programmed Emergency Call
OneTouch Emergency Call
Turning off the phone by
.
The following functions are not available when this fea-
ture is on.
•
•
Automatic Answering
Quick Dialing
To Activate:
1. Press
F
ABC
to activate “Phone Lock”
1
2
mode.
Note: The phone will remain
locked even if the power
is turned off.
Automatic Phone Lock (F13)
If you activate this feature, the phone will automatically
go into the phone lock condition after it is turned off.
(See Phone Lock (F12) above.) When you turn the
phone on, you must enter the four-digit unlock code
before it operates. (See To Unlock the Phone below.)
F
DEF
1. Press
.
1
3
2. You can turn this feature
on/off by
or
.
F
3. Press
to set.
To Unlock the Phone
1. Enter the four-digit unlock code.
2. The “Phone Lock” indicator will go out.
To Change the Unlock Code (F14)
F
GHI
1. Press
.
1
4
F
2. Enter the four-digit security code and press
.
50
3. The current unlock code
will be displayed.
F
4. Enter a new four-digit unlock code and press
.
Display Features
Own Telephone Number Display (F21)
This feature enables you to display your own telephone
number and the ID number (SID) of your “Home” Cellu-
lar System.
F
ABC
Press
.
2
1
Backlight Control (Standby) (F22-1)
The LCD display and keypad are backlighted automati-
cally after Power-On.
The backlighting duration can be changed. Four modes
are available.
F
ABC
ABC
1. Press
2. Press
.
2
2
F
.
3. You can change the current mode by
or
.
F
4. Press
to set.
• 10SEC – 10 Seconds Mode
Backlight is on for 10 seconds after a key is pressed. It
also lights automatically when the power is turned on
and for an incoming call. The duration is variable be-
F
tween 5 to 30 seconds, by pressing
.
• OFF – Off Mode
Backlight is on momentarily when the power is first
turned on, but remains off thereafter.
• ALWAYS ON – Always On Mode
Backlight is always on.
Note: You can keep the backlight on while you are en-
gaged in a conversation. See Backlight Con-
trol (In-Use) (F22-2) on page 52.
51
Backlight Control (In-Use) (F22-2)
For ease of operation, you may select to have the back-
light always on while you are engaged in a conversation.
When this feature is set to the “ALWAYS ON” mode, the
backlight is turned on as long as the call is connected.
F
ABC
ABC
1. Press
, and
2
2
scroll to “IN–USE”.
F
2. Press
.
3. Scroll with
or
to “NORMAL” or “AL-
WAYS ON”.
F
4. Press
to set.
Auto Hyphenation (F23)
See Auto Hyphenation on page 24.
F
ABC
DEF
1. Press
.
2
3
2. Scroll with
or
to set.
to “ON” or “OFF”.
F
3. Press
SMS Text Lines Selection (F24)
You can select to have Text Messages displayed in ei-
ther 3 or 4 lines.
F
ABC
GHI
1. Press
.
2
4
2. Scroll with
or
to set.
to “3LINES” or “4LINES”.
F
3. Press
Contrast Control (F25)
The LCD display contrast can be adjusted in 7 steps for
your best condition.
F
ABC
JKL
1. Press
.
2
5
2. Adjust the contrast with
or
.
F
3. Press
to set.
52
Software Version Review (F26)
This feature permits you to review the software version
which is installed in your phone.
F
ABC
MNO
1. Press
.
2
6
F
2. Press
to exit.
Last Rescan SID Indicator (F27)
This menu item permits you to view the System Identi-
fication number (SID), which your phone is currently
using.
F
ABC
PQRS
1. Press
.
2
7
F
2. Press
to exit.
PRL ID Review (F28)
This menu item permits you to view the Preferred
Roaming List (PRL) version that is programmed in your
phone.
F
ABC
TUV
1. Press
.
2
8
F
2. Press
to exit.
53
Volume and Tone Controls
Alert Tone Volume Control (F31)
F
DEF
1. Press
.
3
1
2. Keep pressing
or
until you get the de-
sired sound level, or “silent” mode.
Note: In “silent” alert mode, alert tone is not given for
an incoming call. However, if Automatic Answer-
ing feature is ON, alert tone is given with the
lowest available volume.
Ring Type Selection (F32)
This feature permits you to select an alert tone pattern
from 15 options including melody ringers.
F
DEF
ABC
1. Press
.
3
2
2. Press
3. Press
or
to select the alert tone.
to set.
F
Key Tone Volume Control (F33)
F
DEF
DEF
1. Press
.
3
3
2. Keep pressing
or
until you achieve the
desired sound level, or “silent” mode.
Note: Key tone will be off in “silent mode”, but tone will
be heard on the other side of the line.
54
To Mute a Phone Conversation (F34)
You can mute your conversation at any time during a
call.
F
DEF
GHI
1. Press
.
3
4
2. Then the “Mute” indicator is displayed.The transmit
audio will be muted but the
receive audio will still be
heard from the receiver.
F
DEF
3. To return to normal conversation, press
3
GHI
again.
4
4. Mute is reset when the call is terminated.
Sending DTMF (F35)
This feature allows you to activate or deactivate Send-
ing DTMF (Touch Tone™) when you enter a number
during a call.
F
DEF
JKL
1. Press
.
3
5
2. Scroll to “ON” or “OFF” to
select.
F
3. Press
to set.
Setting Tones (F36)
This is a group of 9 functions related to the setting of
tones.
F
DEF
MNO
1. Press
.
3
6
The Branch Menu is dis-
played.
2. Refer to the particular functions for details.
Key Tone Length (F36-1)
This feature selects the duration of the tone length when
a key is pressed.
F
DEF
MNO
1. Press
and
3
6
.
1
2. You can change the current mode by
or
.
F
3. Press
to set.
• NORMAL – Normal Mode
Tone is heard as long as the key is being pressed.
• SHORT – Short Mode
Tone is heard for a short time even if the key remains
pressed.
55
Single Alert Beep Tone (F36-2)
This feature is used to signal an incoming call with only
a single beep. This feature can only be used with the
“silent” alert mode. See Alert Tone Volume Control
(F31) on page 54.
F
DEF
MNO
1. Press
and
3
6
ABC
.
2
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
Voice Mail Alert (F36-3)
This feature audibly alerts you when a Voice Mail Noti-
fication is received. A Voice Mail Notification is received
if yourVoice Mail contains messages that have not been
reviewed.
F
DEF
MNO
1. Press
and
3
6
DEF
.
3
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
Text Message Alert (F36-4)
This feature audibly alerts you when a Text Message is
received.
F
DEF
MNO
1. Press
and
3
6
GHI
.
4
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
Caller ID Alert (F36-5)
This feature audibly alerts you when a Caller ID is re-
ceived.
F
DEF
MNO
1. Press
and
3
6
JKL
.
5
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
56
Service Mode Alert (F36-6)
With this feature on, an audible tone alerts you when
the service mode changes from Digital to Analog, or
vice versa.
F
DEF
MNO
1. Press
and
3
6
MNO
.
6
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
Voice Privacy Alert (F36-7)
This feature audibly alerts you when the voice privacy
service is provided, and also when the service is can-
celed.
F
DEF
MNO
1. Press
and
3
6
PQRS
.
7
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
One Minute Beep Tone (F36-8)
With this feature on, you will be notified during a call,
once every minute by a short beep tone. In addition,
two beep tones will sound every five minutes.
F
DEF
MNO
1. Press
and
3
6
TUV
.
8
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
Low Battery Alarm (F36-9)
When activated, this feature warns by an audible alarm
when the battery level is low.
If the alarm is given, recharge the battery or replace it
with a fully charged battery.
F
DEF
MNO
1. Press
and
3
6
WXYZ
.
9
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
57
Call Timers
To help you manage your calls, your phone is equipped
with several Call Timers.
Last Call Timer (F41-1)
F
GHI
1. Press
.
4
1
The talk time of the last call
will be displayed.
F
2. Press
to exit.
Outgoing Call Timer (F41-2)
F
GHI
ABC
1. Press
and
. The cumulative
4
1
2
talk time of all outgoing
calls will be displayed.
F
2. Press
to exit.
All Calls Timer (F41-3)
F
GHI
DEF
1. Press
and
. The cumulative
4
1
3
talk time of all incoming
and outgoing calls will be
displayed.
F
2. Press
to exit.
Note: The above three timers can be reset to zero by
using “Call Timer Reset” feature. See page 66.
Lifetime Timer (F41-4)
F
GHI
GHI
1. Press
and
. The cumulative
4
1
4
“lifetime” talk time of all in-
coming and outgoing calls
will be displayed.
This timer cannot be reset to zero.
F
2. Press
to exit.
Clock Indicator (F42)
When the phone is in an area with digital service (Digi-
tal Mode) with this feature enabled, the date and time
are automatically displayed.
F
GHI
ABC
1. Press
.
4
2
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
58
System Features
A/B System Selection (F51)
This feature permits you to select which Cellular sys-
tem (A or B) your phone uses.When you turn the phone
on, it remembers the last A/B setting and will scan the
radio channels based on that setting.
Leave this setting as it has been preprogrammed un-
less you have a reason to alter the system selection.
To alter the system selection:
F
JKL
1. Press
.
5
1
The current mode will be
displayed.
2. You can change the current mode by
or
.
F
3. Press
to set.
• AUTO ROAM – Auto Roam Mode
The phone will scan the priority systems first, and then
non-priority systems. For more information as to how
this mode works, see Enhanced Roaming below.
• HOME – Home Only Mode
You can place or receive calls only within your home
area or home affiliated area.
• A-ONLY – A-System Only Mode
The phone will scan the A-system only and prevents
switching over to the B-system.
• B-ONLY – B-System Only Mode
The phone will scan the B-system only.
Note: If your LCD displays “AUTO ROAM”, your phone
has been pre-programmed to operate in the Auto
Roam Mode only.
Enhanced Roaming
Cellular systems are identified by a number called System
Identifier or SID.Your phone is equipped with a Preferred
Roaming List (PRL) which can be programmed by your
Carrier to take advantage of the families of cellular system
(SIDs) that your Carrier owns, or has special billing ar-
rangements with, in different cities.
In your Home System Area, both “No Service” and “
”
Rm
are off in your display.Outside of the Home System in Ser-
vice Areas closely associated with your Carrier, the phone’s
display may appear the same as when operating in the
Home System.
59
In areas where your Carrier has Roaming agreements,
your phone will display a steady “
” indication. If your
Rm
display indicates a flashing “
”, you are in a cellular
system which is not associated with your Carrier (you
can still make or receive calls).
If your display indicates “(No Service)”, you may have to
change your A/B System Selection or NAM Selection in
order to obtain service. If your display indicates “No Ser-
vice”, you are in an area where there is no cellular service.
NAM Selection (F52)
Some Cellular users may find it beneficial to register
their phones with multiple numbers, for different cities
where they may frequently travel.To provide this ability,
your phone has two NAMs (Number Assignment Mod-
ules) enabling up to two registrations.
If you have multiple registrations, the NAM Selection
feature enables you to change the NAM being used by
your phone. Do not use this feature, if you do not have
multiple registrations.
To change NAMs:
F
JKL
ABC
1. Press
.
5
2
2. You can change the current NAM by
or
.
F
3. Press
to set.
Force Analog Call (F53)
This feature temporarily directs the phone to use the
Analog Mode even if the Digital Mode has been previ-
ously selected.
F
JKL
DEF
1. Press
.
5
3
F
2. Press
when scanning the Analog Mode.
Notes: This feature automatically ends if:
1) The phone is turned off.
2) An outgoing call is made.
3) An incoming call is received.
4) After 10 minutes if items 1) ~ 3) did not occur.
60
System Settings (F54)
This is a group of several functions for settings related
to the system.
F
JKL
GHI
1. Press
.
5
4
The Branch Menu is dis-
played.
NAM Name Display (F54-1)
You can program a greeting or a name of a maximum
10 to 12 characters in the second line of your LCD dis-
play.This will be displayed when the phone is turned on
or when you change the NAM. (See NAM Selection
(F52) on page 60.) As you can program different name
for each NAM, you can tell which NAM is currently ac-
tive when you turn the phone on.
F
JKL
GHI
1. Press
and
5
4
.
1
2. You can select other NAM
by or
.
F
Then press
to edit.
3. Enter your message.
(See Alpha Mode on page 27.)
4. Press
to store the message.
STO
Automatic NAM (F54-2)
If you have multiple NAM registrations (see previous de-
scription), your phone will recognize NAMs for which you
are registered. The phone will then automatically switch
to the proper NAM for the area in which you are in.
F
JKL
GHI
1. Press
and
5
4
ABC
.
2
2. You can turn this feature
on/off by
or
.
F
3. Press
to set.
Automatic Retry (F54-3)
With this feature on, your telephone will automatically
make up to seven call attempts when the first try is not
successful.
61
IN USE
The
indicator will stay on, and the speaker will be
muted. Press
1. Press
DEF
to cancel the Automatic Retry.
JKL
GHI
F
and
5
4
.
3
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
Enhanced Voice Privacy Service (F54-4)
(Digital Mode Only)
This feature requests the cellular system to provide the
enhanced voice privacy service. This service can only
be provided in the Digital Mode, and its availability de-
pends on the cellular system and your service provider.
To Set the Enhanced Voice Privacy Mode:
F
JKL
GHI
1. Press
and
5
4
GHI
.
4
2. To request the cellular system to provide the en-
hanced voice privacy service, select “EN-
F
HANCED” with
or
, and press
.
3. When the phone is operating in the Enhanced
Voice Privacy Mode, “VP” appears in the upper
line of the display during talking.
4. To request the cellular system not to use the en-
hanced voice privacy service, select “STANDARD”
F
with
or
, and press
.
Notes: 1. This feature must be activated before the call
is initiated.
2. Even if the standard mode is selected, the
cellular system may direct the phone to use
the Enhanced Voice Privacy Mode.
Anti Fraud Security Features
Your new Audiovox Cellular telephone has been engi-
neered with the latest technology to help protect from
the fraudulent use of your cellular telephone number.
Your phone is equipped with Authentication and PIN
(Personal Identification Number) Dialing. (Availability of
these features depends on your Service Provider).
Should your Service Provider require use of a PIN, your
PIN can be sent manually or programmed into the phone
for more convenient use.
62
To Place a Call with the Manual PIN Entry
1. Enter the number you are calling, or recall the
number from a specific memory location.
2. Press
. Your call will be processed. Listen
for a double beep, which will prompt you to send
your PIN.
3. Enter your PIN number, and press
call will then be placed.
. Your
To Place a Call with the Automatic PIN Feature
1. Enter the number you are calling, or recall the
number from a specific memory location.
2. Press “SEND” key
processed, you will have
the display:
. As your call is being
3. Press “SEND” key
again.Your call will then
be placed.
Note: Before you can use this feature, you must pro-
gram your PIN and turn the Automatic PIN fea-
ture on. (See procedures below.)
To Place a Call to Voice Mail using the
Automatic PIN Feature
(See Voice Mail Dialing on page 44.)
1. Press
for more than one second. As your call
V
is being processed, you
will have the display:
2. Press
again, your PIN will be sent.
again. The second number stored in
V
V
3. Press
will be sent inTouch Tone™ signals.The sub-
sequent numbers, if any, can be sent sequentially
by pressing
V
.
V
To Turn the Automatic PIN Feature On/Off (F54-5)
F
JKL
GHI
1. Press
and
5
4
JKL
.
5
2. You can turn this feature on/off by
or
.
F
3. Press
to set.
63
To Program or Change your Automatic PIN (F54-6)
F
JKL
GHI
1. Press
and
5
4
MNO
.
6
2. Enter the four-digit secu-
F
rity code and press
.
F
3. Enter your new PIN Code.Press
to program.
Security Features
Call Restriction (F61)
This feature permits you to impose various kinds of re-
strictions on outgoing calls. Emergency numbers can
be placed even when this feature is on.
To Set Call Restriction Mode
F
MNO
1. Press
.
6
1
2. Enter the four-digit secu-
F
rity code and press
.
3. You can change the current Restriction mode by
or
.
F
4. Press
to set.
The available Restriction modes are as follows:
• 11DIGITS – 11 Digits Mode
Only phone numbers of 11 digits or less are accepted.
Operator assisted dialing is prohibited.
• 7DIGITS – 7 Digits Mode
Only phone numbers of 7 digits or less are accepted.
Operator assisted dialing is prohibited.
• OPERATOR – Operator Mode
Operator assisted dialing (0 Origination Call) is prohibited.
• RCL01-09 – Phonebook Address Mode
Only outgoing calls to the numbers stored in the
phonebook address range 01 – 09 can be made.If there
is a need to expand this range of addresses please ask
your dealer.
• OFF – Off Mode
No restriction.
64
To Change Emergency Numbers (F62)
You can program your own emergency numbers. Up to
3 numbers of maximum 32 digits can be stored.
Memory Location
Preset Emergency Number
1
2
3
911
911
Blank
F
MNO
ABC
1. Press
.
6
2
2. Enter the four-digit secu-
F
rity code and press
.
3. Press or
to select the emergency num-
ber memory location (1, 2 or 3) that you want to
F
change or program, and press
.
F
4. Enter the new emergency number, and press
.
Note: The emergency number in memory location 1
will be dialed when the OneTouch Emergency
Call feature is used.
To Turn On/Off OneTouch Emergency
Call Feature (F63)
F
MNO
DEF
1. Press
.
6
3
2. Enter the four-digit secu-
F
rity code and press
.
3. You can turn this feature on/off by
or
.
F
4. Press
to set.
To Change the Security Code (F64)
F
MNO
GHI
1. Press
.
6
4
F
2. Enter the four-digit security code and press
3. The current security code
is displayed.
.
.
F
4. Enter a new four-digit security code and press
65
Reset Functions (F65)
This is a group of several functions for Function/Memory
Reset.
F
MNO
JKL
1. Press
.
6
5
2. Enter the four-digit secu-
F
rity code and press
.
Then the Branch Menu is
displayed.
Call Timer Reset (F65-1)
This feature resets all the following three Call Timers;
Last CallTimer, Outgoing CallTimer and All CallsTimer.
F
MNO
JKL
1. Press
.
6
5
F
2. Enter the four-digit security code and press
.
3. Press
4. Press
.
1
F
to reset the call timers.
Phonebook All Clear (F65-2)
This feature clears all of Phonebook locations (01 to
99) and the voice mail dialing memory
.
V
F
MNO
JKL
1. Press
.
6
5
F
2. Enter the four-digit security code and press
.
ABC
3. Press
.
2
F
4. Press
to clear the memory.
Call History All Clear (F65-3)
This feature clears all call history for outgoing and in-
coming calls including Caller ID.
F
MNO
JKL
1. Press
.
6
5
F
2. Enter the four-digit security code and press
.
DEF
3. Press
.
3
F
4. Press
to clear the history.
66
Text Message & Voice Mail All Clear (F65-4)
This feature clears allText Messages and theVoice Mail
number.
F
MNO
JKL
1. Press
.
6
5
2. Enter the four-digit security
F
code and press
.
GHI
4
3. Press
4. Press
to clear the message.
F
Function Reset (F65-5)
This feature permits you to reset the User-Program-
mable functions to their initial settings.
F
MNO
JKL
1. Press
.
6
5
2. Enter the four-digit security
F
code and press
.
JKL
5
3. Press
4. Press
.
F
to reset.
Note: See Function Reset Status on page 68.
Other Functions
Quick Dialing (F01)
When this feature is on, the primary number in your
phonebook address 02 to 09 can be dialed with just a
single press of the key.
F
OPER
1. Press
.
0
1
2. Scroll to “ON” or “OFF” you
F
want and press
.
Automatic Answering (F02)
With this feature on, incoming calls will be automati-
cally answered after a preset duration of alert tones.
This feature may be convenient when your telephone is
installed in the handsfree car kit.
F
OPER
ABC
1. Press
.
0
2
2. Scroll to “ON” and press
F
.
3. Enter duration (5 to 30) in seconds.
F
4. Press
to set.
Note: This feature will not function if the phone is in
“Phone Lock”, or “Keypad Lock” mode.
67
Function Reset Status
The following functions will return to the initial settings
after Function Reset.
Functions
Initial Setting
OFF
Automatic Lock (F13)
Backlight Control
Portable Use
10 Seconds
Always ON
Normal
ON
(Standby) (F22-1) With Car Kit
Backlight Control (In-Use) (F22-2)
Auto Hyphenation (F23)
Text Lines Selection (F24)
Contrast Control (F25)
3 Lines
Standard
Level 3 (Max = 4)
Level 4 (Max = 4)
Ring #1
Level 3 (Max = 4)
ON
Earpiece Volume Control
Alert Tone Volume Control (F31)
Ring Type Selection (F32)
Key Tone Volume Control (F33)
Sending DTMF (F35)
Key Tone Length (F36-1)
Single Alert Beep Tone (F36-2)
Voice Mail Alert (F36-3)
Normal
OFF
ON
Text Message Alert (F36-4)
Caller ID Alert (F36-5)
ON
ON
Service Mode Alert (F36-6)
Voice Privacy Alert (F36-7)
One Minute Beep Tone (F36-8)
Low Battery Alarm (F36-9)
Clock Indicator (F42)
OFF
OFF
OFF
ON
ON
A/B System Selection (F51)
NAM Selection (F52)
Auto Roam
NAM #1
OFF
Automatic NAM (F54-2)
Automatic Retry (F54-3)
Voice Privacy Service (F54-4)
Automatic PIN Mode (F54-5)
Call Restriction (F61)
OFF
Standard
OFF
OFF
OneTouch Emergency Call (F63)
Quick Dialing (F01)
ON
ON
Automatic Answering (F02)
*Call in Absence Indicator (F03)
*Safety Timer (F04)
OFF
OFF
8 hours
* Affects Handsfree operation only.
Refer to Handsfree Car Kit (HF-4000) manual.
68
MEMO
69
MEMO
70
IINNDDEEXX
A
P
Alpha Mode .................... 27
Any Key Answering ...... 19
Automatic Answering ... 67
Automatic Calls-in-Absence
Indicator ..............................20
Phone Lock .................... 50
Automatic .................... 50
Unlock ......................... 50
Phonebook
All Clear....................... 66
Phonebook Edit
Change Priority ........... 36
Erase ........................... 36
Modify.......................... 34
Move............................ 35
Phonebook Entry
Automatic Storing ........ 25
Dual Numbers ............. 26
Name........................... 27
Number ....................... 23
Overwrite ..................... 24
Ring Type .................... 29
Phonebook Recall
Address Mode ............. 31
Key Word
Search Mode ............... 32
Sort Scroll Mode ......... 31
PIN
Automatic .............. 63, 64
Manual ........................ 63
Prepending Dialing ....... 33
PRL ........................... 53, 59
B
Backlight Control
In-Use.......................... 52
Standby ....................... 51
Battery
Alarm ........................... 57
Attach/Detach.............. 12
Recharge ..................... 12
C
Call
Place ........................... 17
Receive ....................... 19
Terminate .................... 17
Call History .................... 40
All Clear ....................... 66
Call Restriction.............. 64
Call Timers ..................... 58
Reset ........................... 66
Call Waiting .................... 21
Caller ID ......................... 19
Alert ............................. 56
Clock Indicator ........ 21, 58
Contrast ......................... 52
Q
Quick Dialing ........... 18, 67
D
R
Distinctive Ringing ....... 20
DTMF .............................. 55
Recall Menu ................... 30
Retry ............................... 61
Ring Type ....................... 54
Ringing Tone .................. 20
E
Emergency Call ............. 18
One Touch ............. 19, 65
Emergency Number
S
Scratch Pad ............. 20, 41
Secret Memory .............. 37
Security Code .......... 49, 65
Short Message
Change........................ 65
Enhanced Roaming ...... 59
F
Service ........................... 45
SID ............................ 53, 59
Speed Dialing ................ 18
System Selection .......... 59
Force Analog Call.......... 60
Function Menu
Access......................... 47
Tree ............................. 48
Function Reset .............. 67
T
Talk Timer ....................... 21
Text Messages ............... 45
Alert ............................. 56
All Clear....................... 67
TouchTone™ .................. 20
from Display ................ 22
from Memory ............... 22
H
Hyphenation
Auto ....................... 24, 52
Manual ........................ 25
K
Keypad Lock .................. 49
L
U
Link Dialing.................... 38
Unlock Code ............ 49, 50
M
V
Mute .......................... 55, 17
Voice Mail
Alert ............................. 56
All Clear....................... 67
Dialing ......................... 44
Notification .................. 43
Voice Privacy ................. 62
Alert ............................. 57
Volume
Alert Tone .................... 54
Earpiece ...................... 20
Key Tone ...................... 54
N
NAM
Automatic .................... 61
Selection ..................... 60
Name Display................. 61
O
Own Telephone
Number .......................... 51
71
WWAARRNNIINGG
When using your cellular telephone, please note that
the following offenses are punishable by fine, imprison-
ment, or both:
• Using obscene, indecent, or profane language.
• Using the phone to give off false distress calls.
• Wiretapping or otherwise intercepting a telephone
call, unless that person has first obtained the con-
sent of the parties participating in the call.
• Making anonymous calls to annoy, harass, or mo-
lest other people.
• Charging to an account without authorization to
avoid payment for service.
• Refusing to yield line when informed that it is
needed for an emergency call (It is also unlawful
to take over a line by stating falsely that it is needed
for an emergency).
The CDM-4000/CDM-4000XL is using one or
more of the following US patents licensed by
QUALCOMM Incorporated:
4,901,307
5,056,109
5,101,501
5,109,390
5,228,054
5,257,283
5,265,119
5,267,261
5,267,262
5,289,527
5,309,474
5,103,459
5,099,204
5,107,225
5,283,536
5,280,472
5,337,338
5,339,046
5,341,456
72
1122 MMOONNTTHH LLIIMMIITTEEDDWWAARRRRAANNTTYY
AUDIOVOX COMMUNICATIONS CORP. (the Com-
pany), warrants to the original retail purchaser of
this Audiovox Handheld Portable Cellular Tele-
phone, that should this product or any part thereof
(except the items listed below), under normal use
and conditions, be proven defective in material or
workmanship within the first twelve (12) month pe-
riod from the date of purchase, such defect(s) will
be repaired or replaced (with new or rebuilt parts)
at the Company’s option, without charge for parts
or labor directly related to the defect(s).
The keypad and display are similarly warranted for
ninety (90) days from date of purchase.
The accessories consisting of the antenna and re-
chargeable battery pack, desktop charger are simi-
larly warranted for twelve (12) months from origi-
nal purchase.
This Warranty does not apply to batteries, fuses,
or costs incurred for testing or checking, or to any
product or part hereof which has suffered through
alteration, serial number defacement, improper in-
stallation, excessive temperature or humidity, envi-
ronmental conditions, mishandling, misuse, neglect
or accident.This Warranty is not assignable or trans-
ferable.
To obtain repairs or replacement within the terms
of this Warranty, the product should be delivered
with proof of warranty coverage, specification of
defect(s), transportation prepaid, to the Company
at the address shown below. For TRAVELERS
WARRANTY SERVICE.
Call toll free to (800) 229-1235 (in N.Y. State, (516)
233-3410) for reference to an Authorized Warranty
Station in your area.
THE EXTENT OF THE COMPANY’S LIABILITY
UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED ABOVE
AND, IN NO EVENT, SHALL THE COMPANY’S LI-
ABILITY EXCEED THE PURCHASE PRICE PAID
BY PURCHASER FOR THE PRODUCT.
73
The Company disclaims liability for geographic cov-
erage, inadequate signal to antenna, communica-
tions range or operation of the Cellular System as
a whole.
ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY
SHALL BE LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. ANY ACTION FOR
BREACH OF ANY WARRANTY HEREUNDER IN-
CLUDING ANY IMPLIED WARRANTY OF MER-
CHANTABILITY MUST BE BROUGHT WITHIN A
PERIOD OF 24 MONTHS FROM DATE OF ORIGI-
NAL PURCHASE. IN NO CASE SHALLTHE COM-
PANY BE LIABLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES FOR BREACH OF
THIS OR ANY OTHERWARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER.
No person or representative is authorized to as-
sume for the Company any liability other than ex-
pressed herein in connection with the sale of this
product.
Some states do not allow limitations on how long
an implied warranty lasts or the exclusion or limita-
tion of incidental or consequential damage so the
above limitation or exclusions may not apply to you.
This Warranty gives you specific legal rights, and
you may also have other rights which vary from state
to state.
IN U.S.A.:
AUDIOVOX COMMUNICATIONS
CORP.
555 Wireless Blvd., Hauppauge,
New York 11788
(516) 233-3300
IN CANADA: AUDIOVOX CANADA LTD.
405 Britannia Road East,
Mississauga, Ontario L4Z3E6
(905) 712-9299
74
Quick Reference
Basic Operation
Turn On/Off
(more than one second)
Phone Number,
Place a Call
Terminate a Call
Receive a Call
Clear Last Digit
Clear All Digits
Earpiece Volume
Rcl
F
Any Key (except
and
)
CLR
(less than 0.5 sec.)
CLR
(more than 0.5 sec.)
or
during a call
Convenience Features
CLR
Store Number in Phonebook
, Phone Number,
STO STO
, Phonebook Address
Rcl
Phonebook Dialing
Speed Dialing
, Phonebook Address,
Phonebook Address,
Rcl
Last Number Redial
Dial last Number Received
Rcl
Messaging Features
Review Voice Mail Number
Review Text Messages
F
F
,
then
or
for scroll
Quick Reference
Basic Operation
Turn On/Off
(more than one second)
Place a Call
Phone Number,
Terminate a Call
Receive a Call
Clear Last Digit
Clear All Digits
Earpiece Volume
Rcl
F
Any Key (except
and
)
CLR
(less than 0.5 sec.)
(more than 0.5 sec.)
CLR
or
during a call
Convenience Features
CLR
STO
STO
Store Number in Phonebook
, Phone Number,
,
Phonebook Address
Rcl
Phonebook Dialing
Speed Dialing
, Phonebook Address,
Phonebook Address,
Rcl
Last Number Redial
Dial last Number Received
Rcl
Messaging Features
Review Voice Mail Number
Review Text Messages
F
F
, then
or
for scroll
Functions
F
F
F
F
F
F
F
F
F
F
F
F
F
Mute/Unmute
1
1
1
2
2
4
4
4
0
5
5
1
2
3
1
2
1
1
1
Keypad Lock
ABC
DEF
Lock the Phone
Automatic Lock
ABC
ABC
GHI
GHI
GHI
OPER
JKL
JKL
Display Own Phone Number & SID
Backlight Control
ABC
Last Call Time Display
Outgoing Call Time Display
All Calls Time Display
Automatic Answering
A/B System Selection
Force Analog Call
ABC
DEF
2
3
ABC
2
1
3
DEF
Functions
F
F
Mute/Unmute
F
F
1
1
Keypad Lock
ABC
DEF
1
1
2
2
4
4
4
0
5
5
2
3
1
2
1
1
1
Lock the Phone
F
F
F
F
F
F
F
F
F
Automatic Lock
ABC
ABC
GHI
GHI
GHI
OPER
JKL
JKL
Display Own Phone Number & SID
Backlight Control
ABC
Last Call Time Display
Outgoing Call Time Display
All Calls Time Display
Automatic Answering
A/B System Selection
Force Analog Call
ABC
2
3
DEF
ABC
2
1
3
DEF
XL
CDM-4000/CDM-4000
DUAL MODE DIGITAL CDMA TELEPHONE
ACCESSORIES
BTR 4000
EM 425
Slim Lithium Ion Battery
Earphone Microphone
BTE 4000
CLP 4000
Extended Lithium Ion Battery
Cigarette Lighter Plug-In
CNR 4000
DTH 4000
AC Adapter
Desktop Holder
LB 4000
Leather Carrying Case
(Not Shown)
PHS 4000
Privacy Handset
(Not Shown)
HF 4000
Hands Free Car Kit
DTC 4000
Desktop Charger With AC Adapter
PPRROOTTEECCTTYYOOUURRWWAARRRRAANNTTYY
Read your Warranty carefully, with the special
consideration to paragraph seven of the Lim-
ited Warranty for your unit.
“Warranty does not apply to...or to any
product or part thereof which has suffered
through alteration... mishandling, misuse,
neglect, or accident”.
Many companies are making look-alike acces-
sories and in some cases, promoting that their
product is equal to or better than the Audiovox
product. Be careful. Some of these products
may not be compatible for use with your
Audiovox product and may damage the unit or
cause it to malfunction. If service is required
on your unit, and it is determined that a non-
Audiovox accessory has created the problem
with your unit, the Warranty will not apply. In
addition, if the unit has already suffered irre-
versible damage by reason of a non-compat-
ible accessory, the Warranty will be voided.To
protect your Warranty, use only compatible ac-
cessories which cannot damage or interfere
with the functioning of your Audiovox product.
AUDIOVOX COMMUNICATIONS CORP.
555 Wireless Blvd., Hauppauge, New York 11788, 516-233-3300
16808 Marquardt Avenue, Cerritos, California 90701, 562-802-5100
Audiovox Canada
405 Britannia Rd. East, Ste 101, Mississauga, Ontario,
Canada L4Z3E6, 905-712-9299
Audiovox Pacific Pty Ltd
110 Rocky Point Road, Kogarah, NSW 2217, Australia,
02-9587-0000
Audiovox New Zealand Pty Ltd
Unit B, 6 Henderson Place, Auckland, 6496345720
Audiovox Singapore Pte Ltd
268 Orchard Road, #07-07, Singapore, 238856, 65-733-5902
© 1999 Audiovox Corporation
|