Atlantis Computer Drive NASF301D User Manual

DiskMaster NASG302D/F301D  
Dual Bay Gigabit/Fast Network  
Storage  
MANUAL  
A06-NASG(F)302(1)_ME01  
Where solutions begin  
ISO 9001:2000 Certified Company  
The award of the information is facultative, but its lack will prevent  
ATLANTIS LAND® from starting the Guarantee process requested.  
Register your product!  
Register your product!  
Register your product!  
Registration on the web  
site  
www.atlantis-land.com within 15 days  
from the purchase of the product dismiss  
the customer from showing a valid proof of  
purchase (Sale Receipt or Invoice) in case  
of the request of intervention. For further  
information we invite you to look at our web  
site at the section WARRANTY.  
Copyright  
The Atlantis Land logo is a registered trademark of Atlantis Land.  
All other names mentioned mat be trademarks or registered  
trademarks of their respective owners. Subject to change without  
notice. No liability for technical errors and/or omissions.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
INDEX  
1.1 An Overview of the DiskMaster ..................................................8  
1.2 Package contents .......................................................................9  
1.3 Choosing a place for your DiskMaster........................................9  
1.4 DiskMaster Application .............................................................10  
1.5 The Front LEDs.........................................................................10  
1.6 The Rear Ports..........................................................................11  
1.7 Default Settings.........................................................................12  
1.8 Hardware Installation................................................................13  
1.9 Hard Disk setup ........................................................................17  
Single Hard Drive installation ......................................... 18  
Dual Hard Drive installation............................................ 20  
1.10 How to login ............................................................................22  
1.11 Mapping a Network Drive .......................................................25  
Mapping a Network Drive in Windows XP...................... 25  
Mapping a Network Drive in Windows Vista................... 27  
2.1 WEB Configuration ...................................................................29  
2.2 Basic .........................................................................................30  
Wizard  
Add User  
31  
33  
Add Group ...................................................................... 34  
Add Folder..................................................................... 35  
2.3 Control Panel ............................................................................36  
Users and Groups .......................................................... 37  
File and Print .................................................................. 41  
System  
46  
Network Service ............................................................. 51  
Maintenance................................................................... 54  
Log File  
65  
2.4 Personal Info.............................................................................66  
2.5 Logout.......................................................................................66  
3.1 Troubleshooting ........................................................................67  
A.1 Using LEDs to Diagnose Problems.......................... 67  
A.1.1 Power LED....................................................................67  
A.1.2 LED Link .......................................................................67  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
A.2 Login: Username and Password............................ 68  
A.3 WEB INTERFACE.................................................... 68  
A.4 General..................................................................... 69  
3.2 Product Support........................................................................71  
APPENDIX  
APPENDIX A: Technical Features (A06-NASG302D)....................72  
APPENDIX B: Technical Features (A06-NASF301D) ....................73  
A06-NASG(F)302(1)D_ME01(V1.0 January 2008)  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Copyright Statement  
No part of this publication may be reproduced, stored in a retrieval system,  
or transmitted in any form or by any means, whether electronic,  
mechanical, photocopying, recording or otherwise without the prior writing  
of the publisher. Windows™ 98SE/2000/ME/XP/VIsta are trademarks of  
Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved.  
The Atlantis Land logo is a registered trademark of Atlantis Land. All other  
names mentioned mat be trademarks or registered trademarks of their  
respective owners. Subject to change without notice. No liability for  
technical errors and/or omissions.  
CE/EMC Restriction of Liability  
The product described in this handbook was designed, produced and  
approved according to the EMC-regulations and is certified to be within  
EMC limitations.  
If the product is used in an uncertified PC, the manufacturer undertakes no  
warranty in respect to the EMC limits. The described product in this  
handbook was constructed, produced and certified so that the measured  
values are within EMC limitations.  
In practice and under special  
circumstances, it may be possible, that the product may be outside of the  
given limits if it is used in a PC that is not produced under EMC  
certification. It is also possible in certain cases and under special  
circumstances, which the given EMC peak values will become out of  
tolerance. In these cases, the user himself is responsible for compliance  
with the EMC limits.  
CE Mark Warning  
This is a Class B product. In a domestic environment, this product may  
cause radio interference, in which case the user may be required to take  
adequate measures.  
Declaration of Conformity (CE Mark)  
Hereby, Sidin SpA, declares that this Dual Bay NAS is in compliance with  
the essential requirements and other relevant provisions of Directive  
2004/108/EC “Electromagnetic Compatibility” and  
93/68/EEC within CE Marking Requirememnt.  
Limited Warranty  
92/31/ECC and  
Our warranties (for hardware and software) do not cover data loss – back  
up the contents of your drive to a separate storage medium on a regular  
basis. Also, consequential damages; incidental damages; and costs related  
to data recovery, removal and installation are not recoverable under our  
warranties.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Safety Information  
Only qualified personnel should carry out technical work on the  
device.  
When cleaning, avoid using cleaning sprays and any kinf of  
solution containing alcohol or other flammable liquids.  
Avoid overheating. This may reduce the life of the device.  
Protect your device from humidity, direct sunlight as well as high  
and extremely low temperatures.  
Do no place any liquids on or close to the unit.  
If the device is brought from a cold environment into a warmer  
installation site, bedewing may occur. Wait until the temperature  
of the device has equalised and it is completely dry before you  
connect to AC main.  
As this device contains up to 2 Hard Disk, particular care must be  
taken to ensure that is not exposed to vibrations during operation.  
Please use the supplied AC/DC Adapter included into g-box. If it is  
connected to other devices, this product or power supply unit may  
be damaged.  
We recommend that you place the device on a non-slip surface.  
Please note that the rubber/plastic feet on the devices may  
damage the surface.  
Check the cable regularly for damage. Damaged cables must be  
replaced immediately.  
Ensure that no objects enter the connection sockets.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Thank you for purchasing the DiskMaster storage solution. With  
speed, ease of use, high capacity, and support for numerous  
applications, DiskMaster is the ideal solution for all of your data  
storage needs.  
1.1 An Overview of the DiskMaster  
Securely access all of your multimedia, music and data files on your  
local LAN or through Internet.  
Thanks to its Fast/Gigabit port and its capacity for two Hard Disks, the  
DiskMaster provides high speed data throughput with the security that all  
your data is safe (only RAID1).  
Based on the IP protocol, the DiskMaster allows you to access all of your  
files from anywhere (an FTP server is included), giving you complete  
control on space and user or group access providing a very granular level  
of security. Furthermore, the Diskmaster allows you to use your favorite  
operating system; Windows®, Mac or Linux.  
Ease of use, performance and security.  
The DiskMaster can be used in three modes: single volume, performance,  
or security mode.  
As a single volume, or JBOD, DiskMaster will show both Hard Disk Drives  
as a single unit, providing maximum capacity and ease of use. If  
performance is what you need, you can configure the Diskmaster in RAID0  
and stream your multimedia and graphic files for multiple users with up to  
160Mb/s reading and 120Mb/s writing speeds (for Gigabit) for immediate  
access to your data.  
Finally, if your business or home needs full data security, DiskMaster not  
only provides a full featured backup software, but also RAID1 functionality.  
This way, even if you lose one of disks, you will have an image of your data  
on the other.  
iTunes®, BitTorrentTM and USB Print Server  
Turn off your computer and use the DiskMaster as your server. DiskMaster  
integrates a BitTorrent client (only on the Gigabit device) so that you can  
now download any file you want without the need to use your computer.  
Now, you will not only will you be able to share your multimedia or data  
files, but you will also be able to use the Diskmaster as a iTunes server and  
play your favorite songs directly from the Diskmaster. Additionally, thanks  
to the DiskMaster’s USB port, you can now connect your normal USB  
printer and turn it into a fully functional networked shared printer. Doing  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
away with the need to have a computer connected to it, and allowing you to  
share it with the rest of the users in the office or at home.  
1.2 Package contents  
Unpack the package and check all the items carefully. Also, keep the box  
and packing materials in case you need to ship the unit in the future. The  
package should contain the following items:  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
DiskMaster Dual BAY Network Storage  
RJ45 CAT 5 cable  
One Quick Start Guide (English, Italian)  
One CD with driver, utility and manuals  
Power Adapter AC-DC (12V, 4A)  
Eide/SATA cables and screw pack and four rubber feet (to be used for  
shock cushioning)  
If any item contained is damaged or missing, please contact your local  
dealer as soon as possible.  
Eide interface is available only on Gigabit Device.  
1.3 Choosing a place for your DiskMaster  
When selecting a place to set up your Disk Array, be sure to follow these  
guidelines:  
ƒ
ƒ
Place on a flat and stable surface capable of supporting at least 5Kg.  
Place the DiskMaster close enough to a network jack for the Ethernet  
cable to reach it.  
ƒ
ƒ
Leave at least 10cm of space at the rear of the device for ventilation.  
Use a grounded wall outlet (uninterruptible online power supply with  
AVR is recommended.)  
ƒ
ƒ
ƒ
Avoid an electrical outlet controlled by wall switches or automatic  
timers. Accidental disruption of the power source may wipe out data in  
the memory of your computer or Disk Array.  
Keep the entire system away from potential sources of  
electromagnetic interference, such as loudspeakers, cordless  
telephones, etc.  
Avoid direct sunlight, excessive heat, moisture, or dust.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
1.4 DiskMaster Application  
When you have completed the steps in this Quick installation Guide, your  
connected network should look similar to this:  
1.5 The Front LEDs  
The following figures illustrate the connector locations for the DiskMaster.  
LED  
MEANING  
Lit when power ON.  
PWR(Blue)  
LINK(Green)  
Lit when connected to Ethernet device.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Flashes when sending/receiving data.  
ACT(Red)  
1.6 The Rear Ports  
PORT  
MEANING  
Leave at least 10cm of space at the rear of  
the device for ventilation.  
1
FAN  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
After the device has turned on (turn on the  
power and wait 3 minutes), press and hold  
reset button for 5 seconds, then release it  
to reset it (this is used when you can not  
login to the DiskMaster, e.g. forgot the  
password.  
2
RESET  
Please use the Ethernet cable to connect  
the DiskMaster to network.  
3
4
LAN(RJ45)  
USB(V1.1)  
Please use the USB printer cable to  
connect the device’s USB port (fro printe  
server).  
Connect the supplied power adapter to  
this jack.  
5
6
POWER (jack)  
Press the power switch to start/shutdown  
the DiskMaster. It will take approximately 3  
minutes to boot up/and shutdown the  
Operating System.  
POWER(ON/OFF)  
1.7 Default Settings  
The TCP/IP protocol stack and Ethernet network adapter must be installed.  
If not, please refer to MS Windows relative manuals.  
Before you configure this device you need to know the following default  
settings:  
Username: admin  
Password: atlantis  
IP address: by DHCP, (If a DHCP server isn’t available in the  
network, the DiskMaster will use 192.168.1.1 and Subnet Mask  
255.255.255.0).  
Server name: DiskMaster  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
1.8 Hardware Installation  
Following is a quick installation guide to get you up and running. For further  
details on each of the settings, please refer to manual on CD.  
Release two screws from the back side.  
Remove the aluminium plate.  
Release the 4 screws in the Hard Disk Mount.  
Place the first Hard Disk in to lower mont.  
Place the second Hard Disk in the upper area.  
Fasten all Hard Disk screws.  
For SATA Hard Disk: connect both power cable and data cable in  
to Hard Disk. For Eide Hard Disk: connect pwer cable and IDE  
cable in to Hard Disk, set jumper in Master mode and Slave mode  
when install 2 HD.  
Slowly put the Hard Disk mount back to case.  
Fasten the 4 screws.  
Fasten the Aluminium plate screws.  
Please use the ethernet cable to connect the device and the  
Router/Switch in the network.  
Please turn on the Power Switch.  
Please check the following pictures.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Dual Interface (SATA I/Il and EIDE) is available only on  
A06-NASG302D.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
1.9 Hard Disk setup  
If the hard disks are being installed for the first time, you need to initialize  
the disks before you can use them. Follow the steps described below.  
Open the web browser, enter the local port IP address of this  
DiskMaster, which default at 192.168.1.1, and click Go to get the login  
page.  
The default username is admin, password atlantis and click “OK” to  
continue.  
To configure your DiskMaster, you will need to use the  
web browser, enter the IP address and then use the web  
configuration for further setup. To find out the IP address  
(if You changed) of your device once it is connected to  
the network, there are several different ways as  
described on the following pages.  
Use the Setup utility included on the CD  
(CDRom\Utility\setup.exe). This will list the device  
automatically and allow you to access the web  
configuration interface with a simple click of your mouse.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Single Hard Drive installation  
The following illustrates the layout of the Web-based Configuration Tool  
main screen. This page allows you to format the physical hard disks into  
DiskMaster.  
Click on Maintenance then Disk Utility.  
Select the mode for the NAS system to partition and format disks.  
Select, in the combo box, the system file (EXT2 / EXT3 / FAT32), EXT 3  
is recommend. Press Format to start formatting (it may require some  
times; do not perform other jobs during hard drive formatting). Now please  
check that this disk is correctely mounted (check Status=mount).  
Once the drive has been formatted, go to Quick Start Wizard (using  
Utility) in order to finish the product setup.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
When the settings are made, the DiskMaster system  
starts formatting the disks. This procedure will destroy all  
the data on the disks. Make sure You have backed up  
any important data on the disks before the format  
process. It may require some times; do not perform other  
jobs during hard drive formatting  
The DiskMaster supports 128bit loop-AES encryption for  
the EXT2 file system. When enabled, the drive has to be  
formatted again and you will be prompted for a password  
(has to be exactly 20 characters).  
Allow system file EXT2 / EXT3 or FAT32.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Dual Hard Drive installation  
The following illustrates the layout of the Web-based Configuration Tool  
main screen. This page allows you to format the physical hard disks into  
DiskMaster.  
Click on Maintenance then Raid Settings.  
In this section you can manage the RAID array and set up your drives. The  
DiskMaster supports RAID 0 and RAID 1. Two hard drives of identical  
capacity and make are required.  
Please Select the RAID mode (RAID 0, RAID 1 or JBOD) then Create  
Raid Systems.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
If only one drive is installed, the RAID configuration will  
not be available.  
Creating the RAID system will take several hours,  
depending on HDD capacity. Do not turn off the power or  
interrupt the system in any other way during this process!  
We recommend using the EXT2 file system for optimum  
performance and functionality. Changing the RAID setup  
will require you to re-format the drives. Make sure you  
backup all data before doing so!  
There are 3 differents RAID mode:  
RAID 0= RAID 0, known as disk striping, has  
generally the best performance, but does not offer  
any redundancy. In this level, data is broken into  
small units called sectors, and sectors are distributed  
across all disks in the array. As it does not provide  
any data protection, if any disk in the array fails then  
all data in the array is lost. Such stripes allocation  
allows to enhance I/O performance.  
RAID 1= RAID Level 1, known as disk mirroring, is a  
popular approach to protect data from adisk failure.  
To implement RAID Level 1, you need at least two  
physical hard drives. As the disks are paired up, all  
disk writes are duplicated on both disks. You can  
back up data without interruption using this algorithm.  
In case of a disk failure, the system can continue to  
run without being affected.  
JBOD=JBOD (Just a Bunch Of Disks) is a group of  
disks. JBOD is not technically RAID but “disk  
spanning.” In this mode, all the disks are grouped  
together so they appears as a large single disk. Each  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
disk can operate independently and is seen as an  
individual disk. Therefore, the total capacity of JBOD  
is the sum of the capacities of each disk. This allows  
the user to add disks until the desired total capacity is  
reached. Since JBOD provides no performance  
increase and data protection, it is seldom used.  
1.10 How to login  
To configure your DiskMaster , you will need to use the web browser, enter  
the IP address and then use the web configuration for further setup. To find  
out the IP address of your device once it is connected to the network, there  
are several different ways as described on the following pages.  
Use the Setup utility included on the CD. This will list the device  
automatically and allow you to access the web configuration interface with  
a simple click of your mouse. You may also use the same utility at a later  
point to map the network drive after you setup your shares.  
Turn on your DiskMaster and make sure it is connected to the same  
network as your computer.  
Start the Setup utility (CDRom:\Utility\setup.exe) by double clicking  
on the Setup file and then pressing the Setup button.  
Your DiskMaster will automatically show up in the device list, but if not  
(click again on Search Again), make sure the Setup utility has access  
to the network and search again. You might have to configure your  
firewall or even temporarily turn it off.  
Select your device and click on OK to start the setup wizard.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Before you can access the device, you will have to enter the admin  
password. The default login is admin/atlantis, so enter admin for the  
password and press OK to login.  
You can define the name (Server Name) for your device and set up  
the IP configuration. When set, press Next to continue.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Set time zone, current Date and Time. Click Next.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
you can compare your new settings with the previous configuration. If  
you find a mistake, go back to make changes but if everything is OK,  
press Save, then OK.  
Alternatively, you could also simply write down the IP  
address in the first step of the setup wizard and then  
access the web configuration interface via your web  
browser. Input the IP address in the URL field of your  
web browser, hit the Enter key, enter admin for the  
username, once more admin for the password and then  
login. You can now use the setup wizard online or  
configure the individual settings yourself.  
1.11 Mapping a Network Drive  
Mapping a Network Drive in Windows XP  
Start->Control Panel.  
Go to the Tools menu and select Map Network Drive.  
Follow the setup wizard and fill in the path to your DiskMaster.  
Alternatively, you can also browse for the shares by clicking on  
the Browse button and locating the folder that way (choose  
guest-share folders).  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Select Reconnect at Logon.  
Then click Finish.  
Once the drive has been mapped, you are able to find and access it under  
My Computer. This link will still be there even after rebooting your  
Operating System.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
In event of problem, please write directly the IP (instead  
of name) in the folder name. Please write:  
\\IP address\guest-share. Then click Finish.  
Mapping a Network Drive in Windows Vista  
Start->Computer  
Click on Map Network Drive.  
Follow the setup wizard and fill in the path to your DiskMaster.  
Alternatively, you can also browse for the shares by clicking on  
the Browse button and locating the folder that way (choose  
guest-share folders).  
Select Reconnect at Logon then click Finish.  
Once the drive has been mapped, you are able to find and access it under  
My Computer. This link will still be there even after rebooting your  
Operating System.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
If event of problem , please write directly the IP (instead  
of name) in the folder name. Please write:  
\\IP Address\guest-share. Then click Finish.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
2.1 WEB Configuration  
Open the web browser, enter the local port IP address of this device, which  
defaults at http://192.168.1.1, and click “Go”, a username and password  
window will appear.  
The default username & password are admin & atlantis, in respectively.  
To configure your DiskMaster, you will need to use the  
web browser, enter the IP address and then use the web  
configuration for further setup. To find out the IP address  
(if You changed) of your device once it is connected to  
the network, there are several different ways as  
described on the following pages.  
Use the Setup utility included on the CD  
(CDRom\Utility\setup.exe). This will list the device  
automatically and allow you to access the web  
configuration interface with a simple click of your mouse.  
You will get a status report web page when login successfully. At the  
configuration homepage, the left navigation page where bookmarks are  
provided links you directly to the desired setup page, including:  
Basic [Quick Setup]  
Control Panel [Users and Groups, File and Print, System,  
Network Service, Maintenance, Log File]  
Personal Info [Personal Information]  
Logout  
Click on the desired item to expand the page in the main navigation page.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
2.2 Basic  
The settings in this menu are aimed at the user who wants to quickly set up  
the DiskMaster and share files on the local network. Only the most basic  
functions and settings are available but it is ideal for someone first using  
this device. For a more advanced set up, see Control Panel.  
Click on Quick Setup will open all the following subsections:  
Wizard  
Add User  
Add Group  
Add Folder  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Wizard  
The setup wizard can be used to configure all the basic LAN settings for  
your DiskMaster. For PC users, if you have followed the setup wizard  
previously, there is no need to go through this again unless you want to  
change some of the settings or have not yet completed the setup.  
Step 1: Select your preferred language for the web interface from the drop  
down list.  
Step 2: Set a new password for the web configuration interface. Not  
required but strongly recommended.  
Step 3: If you prefer a different hostname for your Dual Giga NAS, you can  
change the name here, otherwise simply use the default name.  
Step 4: We recommend setting both IP Address and DNS Server to obtain  
the IP automatically but if required, you can set it manually. If you need  
assistance in manually filling out these fields, please contact your  
network administrator for help.  
Step 5: Set the date and time manually or select your time zone from the  
drop down list and use a NTP server to synchronise the time via the  
internet.  
Step 6: Compare the new settings with the previous configuration and if  
OK, complete the setup wizard to save the new settings. Click on  
Complete.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
To avoid languages support issue, you are suggested to  
create/share folders with English characters only.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Add User  
Use this setup wizard to quickly add and configure a new user account.  
Step 1: Enter the user name and password for the new account. At the  
same time, you can also create a private folder for that user and set the  
quota limit.  
Step 2: If there are other users already set up, they can be added to the  
user account management.  
Step 3: In the last step you can configure the permissions to the shared  
folder and add or remove other users.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Add Group  
Use this setup wizard to quickly add a new group.  
Step 1: Enter the group name.  
Step 2: Configure which members will be included in this group by adding  
and removing the members from the list.  
Step 3: Configure the share permissions by adding (read only or writable)  
and removing the shares from the list.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Add Folder  
Use this setup wizard to quickly add a new share folder.  
Step 1: Enter the share folder name and an optional description for the  
share.  
Step 2: Configure the Windows/FTP access permissions by adding (read  
only or writable) and removing the members or group from the list.  
Step 3: Configure the NFS access permissions by adding unique IP  
addresses or a subnet.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
2.3 Control Panel  
This menu includes all the settings and information the DiskMaster offers.  
Sorted into individual categories, the user can access only particular  
settings or adjust and modify everything manually.  
Click on Control Panel will open all the following subsections:  
Users and Groups  
File and Print  
System  
Network Service  
Maintenance  
Log File  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Users and Groups  
In this menu, the admin can manage the users and groups for the  
DiskMaster. Start by adding your users first, then create the groups and  
assign the members to their groups.  
Click on Users and Group will open all the following subsections:  
User Management  
Group Management  
User Management  
In this section you can see all existing users for the DiskMaster and  
manage them by adding or removing them from the list.  
Existing Users: Lists the current users of the DiskMaster.  
Adding Users: To add a new user, click on Add User, use this setup  
wizard to quickly add a new share folder.  
Step 1: Enter the user name and password for the new account. At the  
same time, you can also create a private folder for that user and set  
the quota limit.  
Step 2: If there are other users already set up, they can be added to  
the user account management.  
Step 3: In the last step you can configure the permissions to the  
shared folder and add or remove other users.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Modifying Users: Select the user from the existing users list and modify  
the settings (Groups). Once done, press the Save button to apply the  
new settings.  
Removing Users: To remove a user, select it from the existing users list  
and then press the Delete User button.  
To add a new user (A06-NASF301D) clear the form by  
pressing the Clear Form button, then fill out a user  
name and password. The description is optional but  
will help you to manage multiple users, so we  
recommend filling out a short description. If required,  
you can create a private folder for that user and set  
a limit for the capacity. Once done, press the Save  
button to create the new user. If you would like to  
add this user to an existing group, select the user  
from the existing users list and press the Groups  
button for further settings. To remove a user, select  
it from the existing users list and then press the  
Delete User button.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Add Group  
In this section you can see all existing groups for the DiskMaster and  
manage them by adding or removing them from the list. Groups are not  
required to grant access to the DiskMaster but will help the admin to  
manage multiple users and easily share a folder among a group of people.  
Existing Groups: Lists the current groups of the DiskMaster.  
Adding Groups: To add a new Group, click on AddGroup, use this setup  
wizard to quickly add a new share folder.  
Step 1: Enter the group name.  
Step 2: Configure which members will be included in this group by  
adding and removing the members from the list.  
Step 3: Configure the share permissions by adding (read only or  
writable) and removing the shares from the list.  
Modifying Groups: Select the group from the existing groups list and  
modify the members by pressing the Members button for further settings.  
Once done, press the Save button to apply the new settings.  
Removing Groups: To remove a group, select it from the existing groups  
list and then press the Delete Group button.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
To add a new group (A06-NASF301D) clear the form by  
pressing the Clear Form button, then enter a new  
group name. Once done, press the Save button to  
create the new group. If you would like to add some  
members to this group, select the group from the  
existing groups list and press the Members button  
for further settings.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
File and Print  
In this menu, you can configure all the settings related to the FTP, NFS and  
printer server. Use this to manage how your files and folders are shared.  
Click on File and Print will open all the following subsections:  
File Server  
Share Management  
Printer Server  
File Server  
In this section you can modify the server settings and also enable or  
disable a service.  
Character set: By default, this is set to English (CP437). If your file names  
include characters from another language, change the encoding here and  
select your language from the drop down list.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Windows Setting: In this section, you can change the workgroup that the  
DiskMaster belongs to and modify its description. The IP for the WINS  
Server (Windows Internet Name Server) can be left blank unless this is  
required for your network.  
FTP Server: This service can be enabled or disabled. When enabled, the  
default FTP port number will be set to 21 but you can change that if  
required.  
NFS Server: This service can either be enabled or disabled depending on  
your requirements.  
Guest Access: To enable guest access (guest-share), enable it and if  
required, set a limit for the disk space (only for A06-NASG302D). For  
security reasons, the guest access can also be disabled.  
After changing any of the settings, press the Save button to apply the new  
configuration and save its settings.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Share Management  
In this section you can manage the shares and access rights.  
Existing Shares: Lists the current shares on the DiskMaster  
Add Share: Click on Add Share, use this setup wizard to quickly add a  
new share folder.  
Step 1: Enter the share folder name and an optional description for the  
share.  
Step 2: Configure the Windows/FTP access permissions by adding  
(read only or writable) and removing the members or group from the  
list.  
Step 3: Configure the NFS access permissions by adding unique IP  
addresses or a subnet.  
Modify a Shared folder: Select the new group from the existing shares  
list, then depending on how you share the files, click on Windows, FTP  
Access or NFS Access and add the users or groups that will have access  
to this share. You can allow access for all users or define each user and  
group separately. The names with an @ for the first letter are groups.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
For A06-NASF301D  
To add a new share, clear the form by pressing the Clear  
Form button, then enter a new share name. Once done,  
press the Save button to create the new group.  
Select the new group from the existing shares list, then  
depending on how you share the files, click on Windows,  
FTP Access or NFS Access and add the users or groups  
that will have access to this share. You can allow access  
for all users or define each user and group separately.  
The names with an @ for the first letter are groups.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Printer Server  
DiskMaster support most of major brand of printers, user can share printer  
resource form the network. Simply follow the steps below:  
Step1. Power on and connect your USB printer in to your DiskMaster.  
Step2. Browse the Web UI and see whether the printer has been detect  
the by DiskMaster.  
Step3. Install your Printer driver in to your computer, (for example. if XYZ  
Printer is connected to DiskMaster, you must install XYZ driver in to the  
computer which going to perform the print job. After driver installation  
please click Start->Setting->Printer and Faxes->Add a printer->Next.  
Step4. Select A network printer or printer attached to another  
computer, and then click Next.  
Step5. Select Browse for a printer than click Next.  
Step6. Search the DiskMaster\LP and USB Printer attached, then click  
next to browse the printer driver.  
Step7. Go to Printer wizard and select the printer driver. Click OK to  
complete setup.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
System  
In this menu you can configure the basic network settings for the  
DiskMaster, find some details related to the firmware, disk usage and set  
up the error notification.  
Click on System will open all the following subsections:  
LAN Settings  
Time Settings  
Turn OFF Server  
Information  
Disk Usage  
LAN Settings  
In this section you can define the hostname for your DiskMaster and set up  
the IP configuration. We recommend using the Obtain IP/DNS address  
automatically. When selecting a hostname, make sure to use a unique  
name and not one that has already been used on the local network.  
If required, you can also set the individual addresses yourself. If you need  
assistance in manually filling out these fields, please contact your network  
administrator for help.  
After changing any of the settings, press the Save button to apply the new  
configuration and save its settings.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Time Settings  
In this section, you can set the date and time manually or select your time  
zone from the drop down list and use a NTP server to synchronise the time  
via the internet  
When set manually, press the Save button to apply the new time and save  
the settings or when synchronised via the internet, select the NTP server  
and press the Update Time button.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Turn OFF Server  
In this section, you can restart the server or turn off the DiskMaster via the  
web browser. Make sure that nobody is accessing the device when you  
restart or turn it off.  
Press the Restart button to restart the server. The system will restart and  
automatically prompt you for the login when it’s ready. Press the Turn Off  
button to shut down the system. The browser will prompt you to close it the  
window after about 90 seconds (Internet Explorer only, for other browser  
close it manually).  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Information  
In this section, you can find the product name, the current firmware and the  
current IP address.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Disk Usage  
In this section, you can find a summary of the hard disk status and disk  
usage. Press the Refresh button to update the information.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Network Service  
In this menu, you can enable or disable the network services like the DHCP  
server, Bonjour and the BitTorrent™ download service.  
Click on Network Service will open all the following subsections:  
DHCP Server  
Bonjour  
BitTorrent  
DHCP Server  
In this section, you can enable and set up the DHCP server. In general,  
there is already a DHCP server on the local network, so you don’t need to  
enable this but if required, enable it and configure the addresses.  
Once you have set everything up, press the Save button to start the DHCP  
server and save the settings.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Bonjour  
In this section, you can enable or disable the Bonjour service. By default,  
this is enabled, offering easy access to the login page. In addition to that,  
you can also enable the iTunes service.  
When the iTunes option is enabled, you can store your MP3 music files in  
the /public/music folder and play them directly from iTunes. The  
DiskMaster will automatically appear in iTunes under shared devices.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
BitTorrent  
In this section, you can manage your torrents and add new downloads to  
the queue. Before you add the first job, set a limit for the download and  
upload speed according to your network’s bandwidth. After changing the  
settings, press the Save button to apply the new configuration.  
To start downloading files, you will have to download a torrent file from the  
internet first and then upload it to the DiskMaster; using browser to select  
the torrent in your computer. Once the torrent file has been added, you can  
start downloading. The files will be stored in your /public/btdownload  
folder. To update downloaded percentage simply press Refresh button.  
BitTorrent is available only on Gigabit NAS (A06-  
NASG302D).  
If there is no hard drive installed or the HDD is not yet  
formatted, this menu is not available. To add a new torrent  
file, use Internet Explorer!  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Maintenance  
In this menu, you can format the hard drives, setup the RAID array,  
upgrade the firmware and manage the configuration settings.  
Click on Maintenance will open all the following subsections:  
Disk Utility  
Raid Settings  
Firmware Upgrade  
Save Configuration  
Restore Configuration  
Factory Reset  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Disk Utility  
This utility can be used to format the individual hard drives and also to see  
all the information related to those disks.  
Disk spin down time: To save power and reduce heat, you can let the  
hard disk spin down if not used for a certain amount of time. Enter a time in  
minutes and press the Save button to apply the new setting.  
Encryption: The DiskMaster supports 128bit loop-AES encryption for the  
EXT2 file system. When enabled, the drive has to be formatted again and  
you will be prompted for a password (has to be exactly 20 characters).  
File System: For drives that are not in a RAID array, there is a choice  
between EXT2, EXT3 and FAT32. For drives installed in the DiskMaster,  
we recommend using EXT2 for optimum performance and functionality.  
Scandisk: Press the Scan button to check the disk integrity. If possible,  
any errors found will automatically be fixed. This will take a while to finish  
depending on the capacity of the drive, and also the disk can not be used  
in that time.  
Detail: Press the Detail button to see further disk information. If the HDD  
supports S.M.A.R.T, it will also report the disk’s health status.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Raid Settings  
In this section you can manage the RAID array and set up your drives. The  
DiskMaster supports RAID 0 and RAID 1. Two hard drives of identical  
capacity and make are required. If only one drive is installed, the RAID  
configuration will not be available.  
Two hard drives of identical capacity and make are  
required for RAID 0/1.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
There are 3 differents RAID mode:  
RAID 0= RAID 0, known as disk striping, has  
generally the best performance, but does not offer  
any redundancy. In this level, data is broken into  
small units called sectors, and sectors are distributed  
across all disks in the array. As it does not provide  
any data protection, if any disk in the array fails then  
all data in the array is lost. Such stripes allocation  
allows to enhance I/O performance.  
RAID 1= RAID Level 1, known as disk mirroring, is a  
popular approach to protect data from adisk failure.  
To implement RAID Level 1, you need at least two  
physical hard drives. As the disks are paired up, all  
disk writes are duplicated on both disks. You can  
back up data without interruption using this algorithm.  
In case of a disk failure, the system can continue to  
run without being affected.  
JBOD=JBOD (Just a Bunch Of Disks) is a group of  
disks. JBOD is not technically RAID but “disk  
spanning.” In this mode, all the disks are grouped  
together so they appears as a large single disk. Each  
disk can operate independently and is seen as an  
individual disk. Therefore, the total capacity of JBOD  
is the sum of the capacities of each disk. This allows  
the user to add disks until the desired total capacity is  
reached. Since JBOD provides no performance  
increase and data protection, it is seldom used.  
Creating the RAID system will take several hours,  
depending on HDD capacity. Do not turn off the power or  
interrupt the system in any other way during this process!  
We recommend using the EXT2 file system for optimum  
performance and functionality. Changing the RAID setup  
will require you to re-format the drives. Make sure you  
backup all data before doing so!  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Raid Settings (Rebuilding)  
When using RAID 1 and one of the drives has failed, the faulty HDD has to  
be replaced and the RAID 1 array rebuilt.  
1. Login and go to the RAID Setting (Maintenance->Raid Settings) menu  
to check the disk status. If there is a problem, it will show which drive has to  
be replaced.  
2. Turn off the power, remove the power supply from the wall socket and  
replace the a new HDD. Please refer to the table below for the HDD  
allocations.  
3. Turn on the power and go to the RAID setting menu. Add the new drive  
and the Dual Giga NAS will start to rebuild your RAID array.  
4. Depending on the capacity, this will take several hours. Do not turn off  
the power or interrupt the system in any other way. The HDD LED will be  
ON while the RAID array is being rebuilt.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Firmware Upgrade  
In this section you can check the current firmware version and upgrade if a  
new firmware and store in on your computer, then browse for the *.gz file,  
select it and start the upgrade.  
When the Start Upgrade button is pressed, all users,  
groups and other configurations will be lost!  
The upgrade process will take 10-20 minutes. Please  
contact your dealer for latest Firmware update.  
We do not recommend to provide users new firmware for  
upgrade unless absolutely necessary.  
During the upgranding time (the upgrade process will take  
10-20 minutes), if any network disconnection or power  
interruption, NAS will be damaged and won't be able to  
start again any more.  
Restore a saved configuration file generated with another  
firmware version may render your DiskMaster unstable  
and prevent some functions from working properly.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
When uploading software to the Router, it is important not  
to interrupt the Web browser by closing the window or  
loading a new page. If the browser is interrupted, it may  
corrupt the software.  
In order to achieve a succesfull upgrade please uninstall  
or remove the Hard Disk drive from the NAS before  
upgrading firmware.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Save Configuration  
For backup and before every firmware upgrade, you can use this function  
to save your current configuration. Press the Save button and save the  
config.tar file on your computer.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Restore Configuration  
To quickly restore previous settings or set up multiple units, you can save  
the configuration and then use this function to upload a previous backup.  
Browse for the config.tar file on your computer and press the Restore  
button to restore the previous settings.  
When the Restore button is pressed, all users, groups  
and other configurations will be lost!  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Factory Reset  
Pressing the “Factory Reset” button will restore all settings to their default  
configuration. Before pressing this button, we recommend saving your  
current configuration (Save Configuration) in case you want to restore it  
again later.  
When the Factory Reset button is pressed, all users,  
groups and other configurations will be lost!  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Log File  
This menu includes all the log files of yourDiskMaster . You can find logs  
for the SAMBA, FTP and DHCP server as well as system and  
administration logs.  
Click on Log File will open all the following subsections:  
Samba Log  
FTP Log  
DHCP Server Log  
System Log  
Administration Log  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
2.4 Personal Info  
This menu is for the system administrator account. It includes the option to  
set the password and some other options related to the web interface.  
2.5 Logout  
This can be used to logout once all the settings have been configured.  
Without installing and formatting a drive first, several  
functions will not be available (example: User&Group  
Management, BitTorrent download).  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
3.1 Troubleshooting  
This chapter covers potential problems and the corresponding remedies.  
A.1 Using LEDs to Diagnose Problems  
The LEDs are useful aides for finding possible problem causes.  
A.1.1 Power LED  
The PWR LED on the front panel does not light up.  
Steps  
1
Corrective Action  
Make sure that the DiskMaster’s power adaptor is connected  
to the device and plugged in to an appropriate power source.  
Use only the supplied power adaptor.  
Check that the DiskMaster and the power source are both  
turned on and the device is receiving sufficient power.  
Check the power jack and verify.  
If the error persists, you may have a hardware problem. In this  
case, you should contact your vendor.  
2
3
4
A.1.2 LED Link  
The LAN LED on the front panel does not light up.  
Steps  
1
Corrective Action  
Check the Ethernet cable connections between the  
DiskMaster and the computer or hub.  
Check for faulty Ethernet cables.  
2
3
4
Make sure your computer’s Ethernet card is working properly.  
If these steps fail to correct the problem, contact your local  
distributor for assistance.  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
A.2 Login: Username and Password  
I forgot my login username and/or password.  
Steps  
Corrective Action  
If you have changed the password and have now forgotten it,  
you will need to upload the default configuration file. This will  
erase all custom configurations and restore all of the factory  
defaults including the password.  
1
Before you configure this device you need to know the  
following default settings:  
2
3
Username: admin  
Password: atlantis  
IP address: by DHCP, (If a DHCP server isn’t available  
in the network, the DiskMaster will use 192.168.1.1  
and Subnet Mask 255.255.255.0).  
Server name: DiskMaster  
It is highly recommended to change the default username and  
password. Make sure you store the username and password  
in a save place.  
A.3 WEB INTERFACE  
I cannot access the web configurator.  
Steps  
1
Corrective Action  
Make sure you are using Internet Explorer 5.0 and later  
versions.  
Delete the temporary web files and log in again.  
In Internet Explorer, click Tools, Internet Options and then  
click the Delete Files ... button.  
2
When a Delete Files window displays, select Delete all offline  
content and click OK. (Steps may vary depending on the  
version of your Internet browser.)  
E.G. Internet Explorer 7 (Tools->Internet Options->Advanced-  
>Reset).  
I cannot access the web configurator.  
Steps  
Corrective Action  
Check Link LED (green).  
Make sure you are using the correct IP address of the  
DiskMaster.  
1
2
Found the new IP address of the DiskMaster with Utility.  
3
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Reset the device.  
4
A.4 General  
Why Can’t I perform RAID function under FAT32 format?  
Steps  
Corrective Action  
FAT32 format doesn’t support RAID functions.  
To perform RAID functions please use EXT2 or EXT3 format.  
1
2
Some of the functions and menus are not available!  
Steps  
1
Corrective Action  
Many of the functions require a hard drive to be installed.  
Make sure you have at least one HDD installed and formatted  
in EXT2 or EXT3.  
When install two HDD without performing RAID setting, and creating a  
Share-Folder, Why NAS can only to create Folder an the second Disk  
(/mnt/ide3/sharefolder) and not on the first Disk (/mnt/ide1/sharefolder).  
Steps  
1
Corrective Action  
The NAS GUI Software is designed to managing RAID 1 or 0  
functions, if user wants to use two separate HDD in the NAS,  
share management will recognize only the first formatting disk.  
For example, if user format Ide1 HDD first than managing  
priority goes to Ide1. But still another HDD space can be  
recognize in the LAN development. User can browse it  
through “My Network place”  
What is the limitation of user on the NAS FTP, Samba and account mode?  
Steps  
1
Corrective Action  
There are following limitations.  
1. Maximum user number: FTP: 8 Users, Samba: 8 Users  
(total 24 sessions at the same time).  
2. FTP Server: Maximum is able to create 32 users accounts,  
8 users account connect at the same time, and maximum 16  
folders shared by one account).  
3. Samba Server: Share Level Access (maximum 16 folders  
shared by root).  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
Does the NAS support Hard disk Power Management?  
Steps  
1
Corrective Action  
The NAS uses standby mode for power management (Sleep  
time), if there is no any activity ranging 5-60 min. You can go  
to web base > Disk Utility > Set Sleep Time function (0 to  
disable function, range 5-60 to enable function.  
What is the protocol of network file sharing system using by DiskMaster?  
Steps  
1
Corrective Action  
DiskMaster has the built-in Samba Server for file sharing, it is  
using SMB (Server Message Block) protocol to integrate  
TCP/IP, NETBUEI and IPX/SPX protocol. In other words, if  
the client PC that can support TCP/IP, NETBUEI or IPX/SPX,  
it will be compatible with DUAL HDD NAS. You can also use  
the built-in FTP Server for file sharing with Internet client.  
Why My USB Printer can not be detected by the NAS Printer server?  
Steps  
1
Corrective Action  
The NAS Printer server does not support GDI/Host-based  
printers. For some Multi Function Printers (MFP); scanning  
functions might not be functional probably. Please contact  
Printer Manufacture for detail Specifications  
Where solutions begin  
ISO 9001:2000 Certified Company  
DiskMaster  
3.2 Product Support  
If you have any problems with the DiskMaster, please contact the dealer  
where you bought this product. If you have any other questions you can  
contact the Atlantis Land company directly at the following address:  
Atlantis Land  
Via Pelizza da Volpedo, 59  
20092 Cinisello Balsamo (MI) Italy  
Fax: +39.(0)2.93906161  
Help Desk :+39.(0)2.93907634  
Where solutions begin  
ISO 9001:2000 Certified Company  
APPENDIX A  
APPENDIX A: Technical Features (A06-NASG302D)  
IP, NBNS(“NetBios” Name Server),  
Microsoft Networks (CIFS/SMB),  
DHCP Server/Client, SNTP Client, NTP  
1 x RJ45 10/100/1000 Base-T port  
USB V1.1 Print Server Port  
Power, Link, Activity  
2 x SATA I/II or 2x EIDE (must use 2 HD with  
the same interface)*  
Protocols  
LAN port  
USB A Port  
LED Indicators  
Hard Disk  
EXT2, EXT3 and FAT32  
Supported System  
Format:  
ARM , 300Mhz (SL 3516 Gemini TM)  
SAMBA, FTP  
iTunes®, BitTorrentTM and USB Print Server  
Reset/Power Switch  
12V DC @ 4A  
CPU  
Sharing Protocol  
Advanced Features  
External buttons  
Input Power  
< 7 watts  
CE  
Power Consumption  
Agency and Regulatory  
Dimensions  
82mm x 135mm x 220mm (W*H*D)  
700g (exclude Hard Disk)  
0° to 40°C  
-10° to 60°C  
10-85% non-condensing  
Weight  
Operating Temperature  
Storage Temperature  
Operating Humidity  
Where solutions begin  
ISO 9001:2000 Certified Company  
APPENDIX B  
APPENDIX B: Technical Features (A06-NASF301D)  
IP, NBNS(“NetBios” Name Server),  
Microsoft Networks (CIFS/SMB),  
DHCP Server/Client, SNTP Client, NTP  
1 x RJ45 10/100/ Base-T port  
USB V1.1 Print Server Port  
Power, Link, Activity  
Protocols  
LAN port  
USB A Port  
LED Indicators  
Hard Disk  
2 x SATA I/II  
EXT2, EXT3 and FAT32  
Supported System  
Format:  
ARM , 300Mhz (SL 3516 Gemini TM)  
SAMBA, FTP  
iTunes® and USB Print Server  
Reset/Power Switch  
12V DC @ 4A  
CPU  
Sharing Protocol  
Advanced Features  
External buttons  
Input Power  
< 7 watts  
CE  
Power Consumption  
Agency and Regulatory  
Dimensions  
82mm x 135mm x 220mm (W*H*D)  
700g (exclude Hard Disk)  
0° to 40°C  
-10° to 60°C  
10-85% non-condensing  
Weight  
Operating Temperature  
Storage Temperature  
Operating Humidity  
Where solutions begin  
ISO 9001:2000 Certified Company  
Atlantis Land  
Via Pelizza da Volpedo, 59  
20092 Cinisello Balsamo – MI – Italy  
Where solutions begin  
ISO 9001:2000 Certified Company  

Maxtor DIAMONDMAXTM PLUS 5120 91536D6 User Manual
Magnavox FW 754P User Manual
JVC KD SX909R User Manual
Hamilton Beach TE118 User Manual
Hamilton Beach 47304 User Manual
Fujitsu Computer Drive MBC2036RC User Manual
Clarion DXZ546MP User Manual
Avanti SHP1701B User Manual
Audiovox BC 20 User Manual
Antec Quiet Computing 0761345 02267 5 User Manual