Aiwa XP EV501C User Manual

Notes  
• The indicator sections of  
WARNING  
roughly shows the  
remaining battery power. One section does not always  
indicate one-fourth of the battery power.  
3-252-374-21 (1)  
To prevent fire or shock hazard, do not expose the unit to  
rain or moisture.  
• Depending on operating conditions, the indicator  
sections of  
may increase or decrease.  
Do not install the appliance in a confined space, such as  
a bookcase or built-in cabinet.  
Notes on using the dry batteries  
• Be sure to remove the AC power adaptor.  
• When the batteries are depleted, replace both batteries  
with new ones.  
To prevent fire, do not cover the ventilation of the  
apparatus with newspapers, tablecloths, curtains, etc. And  
don’t place lighted candles on the apparatus.  
Portable CD Player  
To use the AC power adaptor (C)  
To prevent fire or shock hazard, do not place objects filled  
with liquids, such as vases, on the apparatus.  
Operating Instructions  
1
Connect the AC power adaptor (not supplied) to an  
AC outlet.  
CAUTION  
The use of optical instruments with this product will  
increase eye hazard.  
Playing a CD  
Certain countries may regulate disposal of the battery used  
to power this product. Please consult with your local  
authority.  
To insert a CD  
1
Slide OPEN to open the lid (A).  
2
Fit the CD to the pivot, then close the lid (D).  
CAUTION  
• INVISIBLE LASER RADIATION WHEN OPEN  
• DO NOT STARE INTO BEAM OR VIEW DIRECTLY  
WITH OPTICAL INSTRUMENT  
Notes  
XP-EV501R/EV501C  
• This CD player can play discs recorded in the Compact  
Disc Digital Audio (Audio CD) format.  
Sony Corporation ©2003 Printed in China  
This CD player can play CD-Rs/CD-RWs recorded in the  
Compact Disc Digital Audio (Audio CD) format, but  
playback capability may vary depending on the quality of  
the disc and the condition of the recording device.  
The validity of the CE marking is restricted to only those  
countries where it is legally enforced, mainly in the  
countries EEA (European Economic Area).  
Owner’s Record  
• This product is designed to play back discs that conform  
to the Compact Disc (CD) standard. Recently, various  
music discs encoded with copyright protection  
technologies are marketed by some record companies.  
Please be aware that among those discs, there are some  
that do not conform to the CD standard and may not be  
playable by this product.  
The illustrations below show the model XP-EV501R.  
CD player (front)  
The model number and the serial number are located at the  
rear of the CD player. Record these numbers in the spaces  
provided below. Refer to them whenever you call upon  
your Aiwa dealer regarding this product.  
Strap holes  
Display  
1P-MODE/  
Model No. _____________________________________  
Serial No. ______________________________________  
3r/t  
(skip/search)  
2SOUND  
For the customers in the USA  
4ca* (play/  
pause)/ENTER  
To operate the CD player  
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15  
of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause  
harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference  
by one or more of the following measures:  
Button/Switch  
Function/Operation  
1 P-MODE/  
(play mode/repeat)  
Press repeatedly until the play  
mode you want appears in the  
display.  
A
5s(stop)/OFF/  
CHARGE  
OPEN  
No indication: Normal play  
“1”: Single play  
“SHUF”: Shuffle play  
“PGM”: PGM (program) play  
To repeat the play mode you  
selected, press and hold until  
DC IN 4.5 V  
(external power  
input) jack  
” appears. To cancel it, press  
\ (headphones)  
jack  
and hold again until “  
disappears.  
7VOL +*/–  
6HOLD  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and  
receiver.  
– Connect the equipment into an outlet on a circuit  
– Consult the dealer or an experienced radio/TV  
technician for help.  
2 SOUND  
Use to emphasize the bass-boosted  
sound. Press repeatedly to select  
*The button has a tactile dot.  
or  
enhances more than  
.*1  
.
You are cautioned that any changes or modifications not  
expressly approved in this manual could void your  
authority to operate this equipment.  
CD player (rear/inside)  
3 r/t  
(B SKIP/F SKIP)  
(skip/search)  
Press r or t once to find  
the beginning of the current/next  
track. Press r or t  
repeatedly to find the beginning of  
the previous/succeeding tracks.  
Press and hold r or t to go  
backward/forward quickly.  
B
Power Sources  
To use the batteries (B)  
Use only the following batteries for your CD player:  
4 ca(play/pause)/ Press to start playing. Press again  
ENTER  
to pause playing.  
To play from the first track, press  
for 2 seconds or more while the  
CD player is stopped.  
Press to enter the selected track  
for the PGM play.  
Dry batteries  
• LR6 (size AA) alkaline batteries (not supplied)  
Open the battery  
compartment lid.  
Insert the ( end first (for both  
batteries).  
Rechargeable batteries  
Charge the rechargeable batteries before using them for  
the first time.  
• Commercially-available size AA Ni-MH rechargeable  
batteries of 1.2 V DC, 700 mAh  
5 s(stop)/OFF/  
CHARGE(s)  
Press to stop playing. Press also to  
start charging.  
8E•A•S•S  
6 HOLD  
Use to lock the controls on your  
CD player or remote control to  
prevent accidental button presses.  
HOLD on the CD player works  
only for the player, while HOLD  
on the remote control works only  
for the remote control.  
Remote control (XP-EV501R only)  
Display  
To insert the batteries  
1
Open the battery compartment lid on the rear of your CD  
player.  
3tF SKIP  
4ca  
Sound mode  
Play mode  
2
Insert two batteries by matching the ) to the diagram  
in the battery compartment and close the lid until it  
clicks into place.  
7VOL  
2SOUND  
7 VOL+/–  
Press (slide for the remote control)  
to adjust the volume.  
3
When using the rechargeable batteries, connect AC  
power adaptor (not supplied) to the DC IN 4.5V jack  
of your CD player and an AC outlet, then press s/  
OFF/CHARGE to start charging.  
The CD player charges the batteries. The “CHG”  
indicator turns on in the display and the indicator  
8 E•A•S•S*2  
Set to ON to protect against sound  
skipping.*3  
CHG  
Track number  
Playing time  
*1 If the sound is distorted when using the SOUND function,  
turn down the volume.  
6HOLD  
Headphones  
jack  
*2 E•A•S•S = Electronic Anti-Shock System  
*3 Sound may skip:  
5s  
Remaining battery power  
sections of  
light up in succession. When the  
– if the CD player receives stronger continuous shock than  
expected,  
– if a dirty or scratched CD is played or  
– when using poor-quality CD-Rs/CD-RWs or if there is a  
problem with the recording device or application software.  
batteries are completely charged, the “CHG” and  
indicators get turned off.  
If you press s/OFF/CHARGE after the charge has  
3rB SKIP  
Note  
already been completed, the  
indicator flashes  
and “Full” appears in the display.  
Use only the supplied remote control. You cannot operate this  
CD player with the remote control supplied with other CD  
players.  
To remove the CD  
4
Disconnect the AC power adaptor.  
Remove the CD while pressing the pivot (E).  
Battery life* (approx. hours)  
(When the CD player is used on a flat and stable place.)  
Playing time varies depending on how the CD player is used.  
(Continue to the reverse side)  
C
D
Label side up  
E•A•S•S  
ON  
to an AC outlet  
OFF  
Two Sony alkaline  
batteries LR6 (SG)  
(produced in Japan)  
50  
40  
DC IN  
4.5 V  
AC power  
adaptor (not  
supplied)  
*
Measured value by the standard of JEITA (Japan  
Electronics and Information Technology Industries  
Association).  
E
To check the remaining power of the  
batteries  
You can check it in the display.  
\
Replace the batteries when “  
” flashes.  
Lo batt*  
* Beep sounds only when the CD player is set to sounds beep.  
See “To turn off the operation beep sound” on the reverse  
side.  
Headphones  

Mr Coffee 117568 User Manual
Motorola I420 User Manual
Microsoft Windows 7 Professional With Service Pack 1 32 bit FQC 04765 User Manual
Maxtor Basics 120GB STM901203EHM301 RK User Manual
Kompernass KH 1114 User Manual
HP Hewlett Packard MSL2024 User Manual
Hitachi Deskstar HDS721025DLE630 User Manual
Cisco Systems Cisco Collab Experience Dx650 CPDX650K9 User Manual
Casio DQ 643 User Manual
Addonics Technologies AD2CFEXC34 User Manual