4
RS-485 I/O Modules:
ADAM-4000
ADAM-4000 Series Overview
ADAM-4000 Series
ADAM-4000 Series
ADAM-4000 Series
ADAM-4000 Series
4-2
4-4
4-5
4-6
RS-485 Modules Overview
Modules Selection Chart
Communication and Controller Modules Selection Guide
I/O Modules Selection Guide
Robust Communication & I/O Modules
ADAM-4000 Robust Family
ADAM-4000 Robust Family
ADAM-4510I
4-8
4-9
Robust RS-485 Modules Overview
Robust RS-485 Modules Selection Guide
Robust RS-422/485 Repeater
4-10
4-10
4-10
4-11
4-11
4-11
ADAM-4520I
ADAM-4117
ADAM-4118
ADAM-4150
Robust RS-232 to RS-422/485 Converter
Robust 8-ch Analog Input Module with Modbus
Robust 8-ch Thermocouple Input Module with Modbus
Robust Digital I/O Module with Modbus
Robust Relay Output Module with Modbus
ADAM-4168
Communication & Controller Modules
Ethernet-enabled Communication Controllers with 4 x DI/O
(with 7-segment LED Display)
Ethernet-enabled Communication Controllers with 1 x AI/O, 2 x DI/O
(with 7-segment LED Display)
ADAM-4501/4501D
4-12
4-13
ADAM-4502/4502D (new)
ADAM-4510/4510S
ADAM-4520/4522
ADAM-4521
4-14
4-14
4-14
4-15
4-15
4-15
RS-422/485 Repeaters
RS-232 to RS-422/485 Converters
Addressable RS-422/485 to RS-232 Converter
Multi-mode Fiber Optic to RS-232/422/485 Converter
Single-mode Fiber Optic to RS-232/422/485 Converter
1-Port Isolated USB to RS-232/422/485 Converters
ADAM-4541
ADAM-4542+
ADAM-4561/4562
I/O Modules
Analog Input Modules
ADAM-4011/4011D
ADAM-4012
ADAM-4013
ADAM-4015
ADAM-4015T
ADAM-4016
ADAM-4017
ADAM-4017+
ADAM-4018
ADAM-4018+
ADAM-4019+
Analog Output Modules
ADAM-4021
4-16
4-16
4-16
4-17
4-17
4-17
4-18
4-18
4-18
4-18
4-18
1-ch Thermocouple Input Modules (with 7-segment LED Display)
1-ch Analog Input Module
1-ch RTD Input Module
6-ch RTD Module with Modbus
6-ch Thermistor Module with Modbus
1-ch Analog Input/Output Module
8-ch Analog Input Module
8-ch Analog Input Module with Modbus
8-ch Thermocouple Input Module
8-ch Thermocouple Input Module with Modbus
8-ch Universal Analog Input Module with Modbus
4-19
4-19
4-19
1-ch Analog Output Module
2-ch Serial Based Dual Loop PID Controller with Modbus
4-ch Analog Output Module with Modbus
ADAM-4022T
ADAM-4024
Digital I/O Modules
ADAM-4050
ADAM-4051
ADAM-4052
ADAM-4053
ADAM-4055
ADAM-4056S/SO
ADAM-4060
ADAM-4068
ADAM-4069
4-20
4-20
4-20
4-21
4-21
4-21
4-22
4-22
4-22
15-ch Digital I/O Module
16-ch Isolated Digital Input Module with Modbus
8-ch Isolated Digital Input Module
16-ch Digital Input Module
16-ch Isolated Digital I/O Module with Modbus
12-ch Sink/Source Type Isolated Digital Output Module with Modbus
4-ch Relay Output Module
8-ch Relay Output Module with Modbus
8-ch Power Relay Output Module with Modbus
Counter/Frequency Modules
ADAM-4080/4080D
Accessories
ADAM-4914V
4-23
2-ch Counter/Frequency Modules (with 7-segment LED Display)
4-23
4-24
4-ch Voltage Input Surge Protection Module
ADAM-4000 Series Common Specifications
RS-485 I/O Modules Overview
USB Communications
1
I/O Module Features
Communication Module
Features
PAC & Software
ADAM-4561/4562 is an one-port isolated USB to RS-
232/422/485 converter. ADAM-4561 can convert USB to
RS-232/422/485 with plug-in terminal. The major features
of ADAM-4562 are the capability to use 9-wire RS-232,
and to get power from the USB port. With 9-wire RS-232
capability, this converter meets the requirements of PLCs,
modems, and controller equipment. As a USB-to-serial
converter, ADAM-4562 supports Plug & Play, and hot-
swapping, which simplifies the configuration process,
and it also acts as a power supply for the module. It is no
longer necessary to have an external power supply. (Please
refer to Page 4-15 for more detail)
Remotely Programmable Input Ranges
2
The ADAM-4000 series modules stand out because of
their ability to accommodate multiple types and ranges
of analog input. The type and range can be remotely
selected by issuing commands from a host computer.
One type of module satisfies many different tasks, which
greatly simplifies design and maintenance. A single kind
of module can handle the measurement needs of a whole
plant. Since all modules are remotely configured by the
host computer, physical adjustments are unnecessary.
Ethernet
BAS
ADAM-4570 and ADAM-4571 are designed for the
connection between serial devices (RS-232/422/485)
and Ethernet. With ADAM-4570 or ADAM-4571, you can
use graphical control software to monitor and control
I/O modules. With existing devices, you can connect to
an Ethernet network with the benefits of enhanced host
performance and convenience. (Please refer to Chapter
17 for more detail)
3
UNO
4
RS-485 I/O
Easy Plug-in System Integration
5
Fiber Optics
Ethernet I/O
With ADAM-4000's Modbus I/O, and built-in Modbus/RTU
protocol, any controller using the Modbus/RTU standard
can be integrated as part of an ADAM-4000 control system.
Any Modbus Ethernet data gateway can upgrade these
I/O Modules up to the Modbus/TCP Ethernet layer. Most
HMI software is bundled with a Modbus driver, and can
access the ADAM-4000 I/O directly. Moreover, Advantech
provides Modbus OPC Server and Modbus/TCP OPC
Server as data exchange interfaces between the ADAM-
4000 Modbus I/O and any Windows Applications.
If users need to transmit over long distances without
noise interference, ADAM-4541 and ADAM-4542+ are
designed for this task. The ADAM-4541 is a multi-mode
converter, which carries signals from fiber optics to RS-
232/422/485. It offers a transmission distance of up to
2500 m with a total immunity to electromagnetic noise.
The ADAM-4542+ is a single-mode converter, which
carries signals from fiber to optics to RS-232/422/485.
It offers a transmission distance of up to 15 km with total
immunity to electromagnetic noise. (Please refer to Page
4-15 for more detail)
6
TPC
7
IPPC
8
FPM
9
AWS
10
Plug-in I/O
11
CompactPCI
12
Signal Conditioning
13
USB I/O
14
Motion Control I/O
15
Ethernet Switch
16
EDG
17
ICOM
4-ꢁ
Modules Selection Chart
4501 Ethernet-enabled Communication Controller with 4DI/4DO (P.4-12)
4501D 4501 with 7-segment LED Display (P.4-12)
4502 Ethernet-enabled Communication Controller with 1AI/1AO/2DI/2DO (P.4-13)
4502D 4502 with 7-segment LED Display (P.4-13)
Controllers
4022T 2-ch Serial Based Dual Loop PID Controller with Modbus (P.4-19)
4570 2-port Ethernet Data Geteway (Refer to Chapter 17)
4571 1-port Ethernet Data Geteway (Refer to Chapter 17)
Ethernet
4510/4510S RS-422/485 Repeater (P.4-14)
Serial
4520/4522 RS-232 to RS-422/485 Converter (P.4-14)
4521 Addressable RS-422/485 to RS-232 Converter (P.4-14)
Communication
Modules
4541 Multi-mode Fiber Optic to RS-232/422/485 Converter (P.4-15)
4542+ Single-mode Fiber Optic to RS-232/422/485 Converter (P.4-15)
Fiber Optic
USB
4561 1-Port Isolated USB to RS-232/422/485 Converter (P.4-15)
4562 1-Port Isolated USB to RS-232 Converter (P.4-15)
4011 1-ch Thermocouple Input Module (P.4-16)
4011D 4011 with 7-segment LED Display (P.4-16)
4012 1-ch Analog Input Module (P.4-16)
4013 1-ch RTD Input Module (P.4-16)
4015 6-ch RTD Input Module with Modbus (P.4-17)
4015T 6-ch Thermistor Input Module with Modbus (P.4-17)
4017 8-ch Analog Input Module (P.4-18)
Analog Input
4017+ 8-ch Analog Input Module with Modbus (P.4-18)
4018 8-ch Thermocouple Input Module (P.4-18)
4018+ 8-ch Thermocouple Input Module with Modbus (P.4-18)
4019+ 8-ch Universal Analog Input Module with Modbus (P.4-18)
4021 1-ch Analog Output Module (P.4-19)
4024 4-ch Analog Output Module with Modbus (P.4-19)
Analog Output
Digital Input
4051 16-ch Isolated Digital Input Module with Modbus (P.4-20)
4052 8-ch Isolated Digital Input Module (P.4-20)
4053 16-ch Digital Input Module (P.4-21)
I/O Modules
4056S 12-ch Sink Type Isolated Digital Output Module with Modbus (P.4-21)
4056SO 12-ch Source Type Isolated Digital Output Module with Modbus (P.4-21)
4060 4-ch Relay Output Module (P.4-22)
Digital Output
4068 8-ch Relay Output Module with Modbus (P.4-22)
4069 8-ch Power Relay Output Module with Modbus (P.4-22)
4080 2-ch Counter/Frequency Module (P.4-23)
4080D 4080 with 7-segment LED Display (P.4-23)
Counter
Mixed I/O
Serial
4016 1-ch Analog Input/Output Module (P.4-17)
4050 15-ch Digital I/O Module (P.4-20)
4055 16-ch Isolated Digital I/O Module with Modbus (P.4-21)
4510I Robust RS-422/485 Repeater (P.4-10)
4520I Robust RS-232 to RS-422/485 Converter (P.4-10)
Robust
Communication
Modules
4117 Robust 8-ch Analog Input Module with Modbus (P.4-10)
4118 Robust 8-ch Thermocouple Input Module with Modbus (P.4-11)
Robust I/O
Modules
Analog Input
Mixed I/O
Counter
4150 Robust 16-ch Isolated Digital I/O Module with Modbus (P.4-11)
4168 Robust 8-ch Relay Output Module with Modbus (P.4-11)
4914V 4-ch Voltage Input Surge Protection Module (P.4-23)
Accessories
RS-485 I/O Modules
4-4
Communication and Controller
Modules Selection Guide
1
PAC & Software
Controllers
Repeaters
Converters & Data Gateways
2
BAS
ADAM-4501
ADAM-4501D ADAM-4502D
ADAM-4502
ADAM-4510 ADAM-4520
ADAM-4510S ADAM-4522
ADAM-4541
ADAM-4542+
ADAM-4561
ADAM-4562
ADAM-4570
ADAM-4571
ADAM-4022T
ADAM-4521
Module
3
RS-422
RS-485
Fiber Optic to
RS-232/422/485
USB to
Ethernet to
UNO
Ethernet, RS-232, RS-485
RS-485
RS-232 to RS-422/485
Network
RS-232/485/422 RS-232/422/485
Modbus/RTU, Modbus/TCP
TCP/IP, UDP, ICMP, ARP, DHCP
ASCII Command/
Modbus
-
Comm. Protocol
4
RS-485 I/O
Ethernet: 10/100 M
Serial: up to
230.4 k
Ethernet: 10/100M
Serial: From 1200 to 115.2 kbps
Comm. Speed
(bps)
Serial: From 1200 to 115.2 k
5
Ethernet: 100 m
Serial: 1.2 Km
ADAM-4541: 2.5 km
ADAM-4542: 15 km
LAN: 100 m
Serial: 1.2 km
Ethernet I/O
Serial: 1.2 km
Serial: 1.2 km Serial: 1.2 km Serial: 1.2 km
Comm. Distance
Serial: 1.2 km
USB: type A client
connector
6
RS-232/422/485:
TPC
RS-232: female RS-232: female plug-in screw terminal Serial:
Ehternet: RJ-45
RS-485: plug-in screw terminal
RS-232: RJ-48
RS-422/485:
plug-in screw
terminal
DB9
RS-422/485:
plug-in screw plug-in screw
terminal terminal
DB9
RS-422/485:
Fiber:
ADAM-4541: ST
connector
ADAM-4542: SC
connector
ADAM-4561:
plug-in screw
terminal
(RS-232/422/485)
ADAM-4562:
DB9 (RS-232)
Ethernet: RJ-45
RS-232/422/485:
RJ-48
RS-485: plug-in
screw terminal
Interface
Connectors
7
IPPC
8
Network: Tx/Rx
Link, Speed, Power
FPM
Communication & Power
Power
Communication and Power
LED Indicators
Yes
Yes
Yes
Yes
-
-
-
Yes
Yes
-
-
Yes
Yes
Yes
Yes
Data Flow Control
Watchdog Timer
9
-
AWS
ADAM-4561:
3000 VDC
ADAM-4562:
2500 VDC
3000 VDC
(ADAM-4510S) (ADAM-4520)
3000 VDC
-
1000 VDC
3000 VDC
1000 VDC
-
-
Isolation Voltage
10
Plug-in I/O
Email function
Built-in HTTP and FTP Server
PID Control
-
-
-
-
-
-
-
-
-
-
-
-
-
Special Features
Built-in I/O
11
CompactPCI
4DI/4DO 1AI/1AO/2DI/2DO
Power
Requirement
+10 ~ +30 VDC
12
Signal Conditioning
Operating
Temperature
-10 ~ 70° C
-10 ~ 50° C
-10 ~ 70° C
0 ~ 60° C
5 ~ 95% RH
20 ~ 95% RH
Humidity
13
USB I/O
ADAM-4561:
1.5 W @ 5 VDC
ADAM-4562:
1.1 W @ 5 VDC
Power
4 W @ 24 VDC
4-13
1.4 W @ 24 VDC 1.2 W @ 24 VDC 1 W @ 24 VDC
1.5 W @ 24 VDC
4-15
4 W @ 24 VDC
Chapter 17
Consumption
14
Motion Control I/O
4-12
4-19
4-14
4-14
4-14
4-15
Page
15
Ethernet Switch
16
EDG
17
ICOM
Online Download
4-ꢂ
I/O Modules Selection Guide
Analog Input
ADAM-4011/
ADAM-4015
ADAM-
4011D
ADAM-4012 ADAM-4013
ADAM-4016 ADAM-4017 ADAM-4017+ ADAM-4018 ADAM-4018+ ADAM-4019+
Module
ADAM-4015T
16 bit
Resolution
6 differential,
2 single-ended
6 differential,
2 single-ended
Input
1 differential
10 Hz
6 differential
1 differential
8 differential
10 Hz (total)
8 differential
8 differential
Channels
Sampling
Rate
15 mV
50 mV
100 mV
500 mV
1 V
15 mV
50 mV
100 mV
500 mV
1 V
100 mV
500 mV
1 V
2.5 V
5 V
150 mV
500 mV
1 V
5 V
150 mV
500 mV
1 V
5 V
10 V
150 mV
500 mV
1 V
5 V
10 V
15 mV
50 mV
100 mV
500 mV
-
-
-
-
Voltage Input
Current Input
10 V
2.5 V
2.5 V
10 V
4~20 mA, 20
mA
4~20 mA, 20
mA
4 ~ 20 mA
20 mA
20 mA
20 mA
-
-
20 mA
-
20 mA
-
20 mA
ADAM-4015:
RTD
ADAM-4015T:
Thermistor
J, K, T, E,
R, S, B
Thermocouple
J, K, T, E,
R, S, B
Thermocouple Thermocouple
J, K, T, E,
R, S, B
J, K, T, E, R, S, B
Thermocouple
Direct Sensor
Input
RTD
-
Yes
(4~20 mA & All
T/C)
Burn-out
Yes
-
-
-
-
-
Yes
Yes
-
-
-
-
-
-
-
Yes
Yes
Detection
Channel
Independant
Configuration
Yes
Yes
Output
-
-
-
-
-
-
-
-
-
-
-
-
1
0 - 10 V
30 mA
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Channels
Voltage
Output
Current
Output
-
-
Digital Input
Channels
1
1
Digital Output
Channels
2
2
-
-
4
-
-
-
-
-
Alarm
Yes
Yes
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Settings
-
-
-
-
Channels
Input
Frequency
3000 VDC
Isolation
Yes (4011D)
-
Digital LED Indicator
Yes
Yes
Yes
Yes
Yes (System) Yes (System) Yes (System)
(System &
Comm.)
Yes (System)
Yes (System)
(System &
Comm.)
Yes (System)
(System &
Comm.)
(System &
Comm.)
Watchdog Timer
-
Safety Setting
Modbus Support *
Page
-
-
-
Yes
-
-
Yes
-
Yes
Yes
4-16
4-16
4-16
4-17
4-17
4-18
4-18
4-18
4-18
4-18
*: All ADAM-4000 I/O Modules support ASCII Commands
RS-485 I/O Modules
4-ꢃ
1
PAC & Software
2
Analog Output
Digital Input/Output
Relay Output
Counter
BAS
ADAM-
4056S/
ADAM-
4056SO
ADAM-4080/
ADAM-4080D
ADAM-4021 ADAM-4024 ADAM-4050 ADAM-4051 ADAM-4052 ADAM-4053 ADAM-4055
ADAM-4060 ADAM-4068 ADAM-4069
3
UNO
12 bit
-
12 bit
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
4
-
RS-485 I/O
-
-
-
-
-
-
-
-
-
-
-
-
-
5
Ethernet I/O
-
-
-
-
-
-
-
-
-
-
-
6
TPC
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7
IPPC
8
FPM
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9
AWS
10
1
4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Plug-in I/O
0 ~ 10 V
10 V
11
CompactPCI
0 ~ 20 mA
4 ~ 20 mA
0 ~ 20 mA
4 ~ 20 mA
-
-
-
-
-
-
4
7
16
8
16
8
12
Signal Conditioning
ADAM-4056S:
12 (Sink)
ADAM-
4056SO:
12 (Source)
8-ch power
relay
-
-
8
-
-
-
-
-
8
-
4-ch relay
8-ch relay
2
13
USB I/O
-
-
-
Yes
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Yes
2
14
Motion Control I/O
-
50 kHz
15
Ethernet Switch
3,000 VDC
-
3,000 VDC
-
-
-
2,500 VDC
Yes
5,000 VRMS
-
-
-
2,500 VDC
Yes
5000 VDC
Yes
-
-
-
-
-
-
2,500 VRMS
Yes (4080D)
16
Yes (System &
Comm.)
Yes (System &
Comm.)
Yes (System & Yes (System &
Comm.)
Yes (System & Yes (System &
Comm.)
EDG
Yes (System)
Yes (System)
Yes (System) Yes (System)
Yes (System)
Yes (System)
Comm.)
Comm.)
-
-
Yes
Yes
-
-
-
-
-
-
-
Yes
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
-
-
17
Yes
4-20
ICOM
4-19
4-19
4-20
4-20
4-21
4-21
4-21
4-22
4-22
4-22
4-23
Online Download
4-ꢄ
ADAM-4000
Robust Family
Robust RS-485 Modules Overview
Introduction
The ADAM-4000 robust family includes the ADAM-4100 series modules,
ADAM-4510I and ADAM-4520I modules. The ADAM-4100 series
modules are compact, versatile sensor-to-computer interface units
designed for reliable operation in harsh environments. Their built-in
microprocessors, encased in rugged industrial-grade ABS+PC plastic,
independently provide intelligent signal conditioning, analog I/O, digital
I/O, LED data display, and an address mode with an user-friendly design
for convenient address reading. The ADAM-4510I and ADAM-4520I
modules are robust industrial-grade communication modules.
The ADAM-4000 robust family is designed to endure more severe
and adverse environments. The operating temperature is -40 ~ 85° C
which makes them suitable for more widespread applications.
Designed for Severe Industrial Environments
. ADAM-4150
Broader Operating Temperature Range
The ADAM-4000 robust family supports a broad operating
temperature range of -40 to +85° C.
Online Firmware Update
1. Over current and temperature protection circuit
2. DI channels support counter (32-bit, overflow
flag) and frequency type signal input
3. DO channels support pulse (1 kHz) and delay
(high-to-low and low-to-high) type signal output.
4. Support invert DI status
The ADAM-4100 series modules have a friendly and
convenient design where firmware can be updated through
a local network or the Internet. You can easily update
latest firmware using utility on host PC. This saves time
and ensures that the module always runs with the latest
functional enhancements.
Higher Noise Immunity
In order to prevent noise from affecting your system, the
ADAM-4000 robust family has been designed with more
protection to counteract these effects. New standard
features include: 1 kV surge protection on power inputs,
3 kV EFT, and 8 kV ESD protection.
. ADAM-4168
1. Support 1 kHz pulse output.
Legacy Communication Protocol Support
ADAM-4100 Module with LED Display
To satisfy both the current ADAM users, and Modbus
users, The ADAM-4100 series modules support both the
ADAM (ASCII) protocol and the Modbus/RTU protocol.
You can select the communication mode you want through
the Windows Utility Software. The Modbus protocol not
only supports the original data format (N, 8, 1) for (parity
check, data bit, stop check) but also accepts (N,8,1) (N,
8, 2) (E, 8, 1) (O, 8, 1).
The ADAM-4100 series modules have a LED display
that lets you monitor the channel status. Using ADAM-
4117/4118, the LED will be lit when related channel is
active. Using ADAM-4150/4168, the LED will be lit when
related channel value is high. The ADAM-4100 series
modules have two operating modes (initial and normal),
unlike the old module using extra wiring, ADAM-4100
modules can use the switch on the case to set "initial"
mode or "normal" mode. It is very convenient for the user to
configure. When you set to "initial" mode, the LED display
can represent the node address of that module. Besides,
when you use multiple ADAM-4100 series modules, you
can locate the module through ADAM utility and LED
display. All of these functions are very helpful to diagnose
the ADAM-4100 series system.
Broader Power Input Range
The ADAM-4000 robust family accepts any unregulated
power source between +10 and +48 VDC. In addition, they
are also protected against accidental power reversals,
and can be safely connected or disconnected without
disturbing a running network.
New Features for I/O Modules
. ADAM-4117/4118
1. Supports 200 VDC High Common Mode voltage
2. Software Filter
3. Support Auto Optimized Working Frequency
4. Auto noise rejection at 50/60 Hz
5. Higher over voltage protection 60 VDC
6. Optional Sampling Rate 10 or 100 samples/sec
7. Supports unipolar and bipolar input
(ADAM-4117 only)
8. Support 15V input range (ADAM-4117 only)
RS-485 I/O Modules
4-ꢅ
Robust RS-485 I/O Modules
Selection Guide
Module
ADAM-4117
ADAM-4118
ADAM-4150
ADAM-4168
1
PAC & Software
Resolution
16 bit
-
-
-
-
-
-
Input Channels
Sampling Rate
8 differential
10/100 Hz (total)
2
BAS
0 ~ 150 mV, 0 ~ 500 mV,
0 ~ 1 V, 0 ~ 5 V, 0 ~ 10 V,
0 ~ 15 V, 150 mV,
500 mV, 1 V, 5 V,
10 V, 15V
15 mV, 50 mV, 100 mV,
500 mV, 1 V, 2.5V
Voltage Input
-
-
3
UNO
Analog Input
0 ~ 20 mA, 20 mA,
4 ~ 20 mA
Current Input
20 mA, 4 ~ 20 mA
-
-
4
RS-485 I/O
J, K, T, E, R, S, B
Thermocouple
Direct Sensor Input
Burn-out Detection
-
-
-
-
-
-
-
Yes (mA)
Yes (mA and All T/C)
5
Ethernet I/O
Channel Independent
Configuration
Yes
Digital Input Channels
Digital Output Channels
Channels
-
-
-
-
-
-
-
-
7
8
-
Digital Input and
Output
6
TPC
8-ch relay
7
-
-
Counter
Input Frequency
3 kHz
7
IPPC
Isolation Voltage
Digital LED Indicator
Watchdog Timer
Safety Setting
3000 VDC
Communication and Power
8
Yes (System & Communication)
FPM
-
Yes
Communication Protocol
Power Requirement
Operating Temperature
Storage Temperature
Humidity
ASCII Command/Modbus
10 ~ 48 VDC
9
AWS
-40 ~ 85° C
-40 ~ 85° C
10
5 ~ 95% RH
Plug-in I/O
Power Consumption
Page
1.2 W @ 24 VDC
4-10
0.5 W @ 24 VDC
4-11
0.7 W @ 24 VDC
4-11
1.8 W @ 24 VDC
4-11
11
CompactPCI
12
Signal Conditioning
Module
ADAM-4510I
ADAM-4520I
Network
RS-422/485
RS-232 to RS-422/485
13
USB I/O
Communication Speed (bps)
Communication Distance
From 1200 to 115.2k
Serial: 1.2 km
RS-232: female DB9
RS-422/485: plug-in screw terminal
14
Interface Connectors
RS-422/485: plug-in screw terminal
Motion Control I/O
Digital LED Indicators
Auto Data Flow Control
Isolation Voltage
Power Requirement
Operating Temperature
Storage Temperature
Humidity
Communication and Power
Yes
15
Ethernet Switch
3000 VDC
10 ~ 48 VDC
-40 ~ 85° C
-40 ~ 85° C
5 ~ 95%
16
EDG
17
Power Consumption
Page
1.4 W @ 24 VDC
4-10
1.2 W @ 24 VDC
4-10
ICOM
Online Download
4-ꢆ
Robust RS-422/485 Repeater
ADAM-4510I
ADAM-4520I
ADAM-4117
Robust RS-232 to RS-422/485 Converter
Robust 8-ch Analog Input Module with Modbus®
ADAM-4510I
ADAM-4520I
ADAM-4117
Specifications
Specifications
Specifications
General
General
General
. Connectors
2 x Plug-in terminal
block (#14 ~ 22 AWG)
System (1.6 second) &
Communication
ASCII Command and
Modbus/RTU
. Connectors
2 x Plug-in terminal
blocks (#14 ~ 22 AWG)
1.4 W @ 24 VDC
. Connectors
1 x Plug-in terminal
block (#14 ~ 22 AWG)
(RS-422/485)
1 x DB9-F (RS-232)
1.2 W @ 24 VDC
. Watchdog Timer
. Support Protocol
. Power Consumption
. Power Consumption
Communications
. Input
. Power Consumption
RS-485 (2-wire) or
RS-422 (4-wire)
RS-485 (2-wire) or
RS-422 (4-wire).
1200,2400, 4800, 9600,
19.2 k, 38.4 k, 57.6 k,
115.2 k, RTS control and
RS-422. (switchable)
1.2 W @ 24 VDC
Communications
. Input
. Output
Analog Input
. Channels
RS-232 (4-wire)
RS-485 (2-wire) or
RS-422 (4-wire).
1200,2400, 4800, 9600,
19.2 k, 38.4 k, 57.6 k,
115.2 k, RTS control and
RS-422. (switchable)
. Output
8 differential
and independent
configuration channels
Voltage: 20 MΩ
Current: 120 Ω
mV, V (supports
uni-polar and bipolar),
mA
0 ~ 150mV, 0 ~ 500mV,
0 ~ 1V, 0 ~ 5V, 0 ~ 10V,
0 ~ 15V, 150 mV,
500 mV, 1V, 5 V,
10 V, 15V, 20 mA,
0 ~ 20 mA, 4 ~ 20mA
. Speed Modes (bps)
. Speed Modes (bps)
. Input Impedance
. lnput Type
. Support Auto Baud-Rate
. Provide RS-485 to RS-422 Convert Ability
. Support Auto Baud-Rate
. lnput Range
. Accuracy
Voltage mode :
Current mode :
. Resolution
. Sampling Rate
0.1% or better
0.2% or better
16 bits
10/100 samples/sec
(selected by Utility)
92 dB
. CMR @ 50/60 Hz
. NMR @ 50/60 Hz
. Over Voltage Protection 60 VDC
60 dB
Common Specifications
. High Common Mode
. Span Drift
. Zero Drift
200 VDC
25 ppm/° C
6μV/° C
General
. Power Input
. Isolation Voltage
Unregulated 10 ~ 48 VDC w/power reversal protection
3000 VDC
. Built-in TVS/ESD Protection
Ordering Information
Environment
. Humidity
. Operating Temperature - 40 ~ 85° C (-40 ~ 185° F)
5 ~ 95% RH
. ADAM-4510I
Robust RS-422/485
Reapter
. ADAM-4520I
Robust RS-232
to RS-422/485
Converter
. Storage Temperature - 40 ~ 85° C (-40 ~ 185° F)
. ADAM-4117
Robust 8-ch Analog
Input Module with
Modbus®
RS-485 I/O Modules
4-10
Robust 8-ch Thermocouple Input Module
with Modbus®
ADAM-4118
ADAM-4150
ADAM-4168
Robust Digital I/O Module with Modbus
Robust Relay Output Module with Modbus
1
PAC & Software
2
BAS
3
UNO
4
RS-485 I/O
ADAM-4118
ADAM-4150
ADAM-4168
5
Ethernet I/O
Specifications
Specifications
Specifications
6
TPC
General
. Power Consumption
General
. Power Consumption
General
. Power Consumption
0.5W @ 24 VDC
0.7 W @ 24 VDC
1.8 W @ 24 VDC
8 Form A
AC: 0.5 A @ 120 V
0.25 A @ 240 V
DC: 1 A @ 30 V
0.3 A @ 110 V
750 VAC (50/60 Hz)
7
IPPC
Analog Input
. Channels
Digital Input
. Channels
. Input Level
Dry contact:
Relay Output
. Output Channels
. Contact Rating
(Resistive)
8 differential
7
and independent
configuration channels
Voltage: 20 MΩ
Current: 120 Ω
T/C, mV, V, mA
8
FPM
Logic level 0: Close to
GND
Logic level 1: Open
Logic level 0: +3 V max
Logic level 1: +10 V to
+30 V
. Input Impedance
. Input Type
. Input Range
Thermocouple
9
Wet contact:
. Breakdown Voltage
. Initial Insulation
Resistance
. Relay Response Time On: 3ms
(Typical) Off: 1ms
. Total Switching Time 10 ms
. Supports 100 Hz pulse output
AWS
J
0 ~ 760 °C
1 G Ω min. @ 500 VDC
K
T
E
R
S
B
0 ~ 1370 °C
-100 ~ 400 °C
0 ~ 1000 °C
500 ~ 1750 °C
500 ~ 1750 °C
500 ~ 1800 °C
(Note: The Digital Input Level 0 and 1 status can be
inverted)
. Support 3 kHz Counter Input (32-bit + 1-bit
overflow)
. Support 3 kHz Frequency Input
10
Plug-in I/O
11
Voltage mode
15 mV, 50 mV,
100 mV, 500 mV,
1 V, 2.5 V
20 mA, 4 ~ 20 mA
Voltage mode: 0.1% or
better
Current mode: 0.2%
or better
16-bit
CompactPCI
. Support Invert DI Status
Current mode
. Accuracy
Digital Output
. Channels
12
Signal Conditioning
8, open collector to 40 V
(1 A max. load)
1W load max
. Power Dissipation
. Ron Maximum
. Support 1 kHz Pulse Output
. Support High-to-Low Delay Output
. Support Low-to-High Delay Output
13
. Resolution
. Sampling Rate
USB I/O
150 mΩ
10/100 samples/sec
(selected by Utility)
92 dB
. CMR @ 50/60 Hz
. NMR @ 50/60 Hz
. Overvoltage Protection 60 VDC
. High Common Mode
. Span Drift
. Zero Drift
. Built-in TVS/ESD Protection
14
Motion Control I/O
60 dB
200 VDC
25 ppm/° C
6μV/° C
15
Ethernet Switch
16
EDG
Ordering Information
Common Specifications
. ADAM-4118
Robust 8-ch
Thermocouple
Input Module with
Modbus®
Robust Digital
I/O Module with
Modbus
Robust Relay
Output Module with
Modbus
. Power Input
Unregulated 10 ~ 48 VDC
System (1.6 second) &
Communication
2 x Plug-in terminal
blocks (#14 ~ 22 AWG)
3000 VDC
ASCII Command and
Modbus/RTU
Environment
. Humidity
. Operating Temperature -40 ~ 85 °C
17
. Watchdog Timer
5 ~ 95% RH
ICOM
. Connector
(-40 ~ 185° F)
. ADAM-4150
. Storage Temperature -40 ~ 85°C
. Isolation Voltage
. Support Protocol
(-40 ~ 185° F)
. ADAM-4168
4-11
Ethernet-enabled Communication
Controller with 4 x DI/O
ADAM-4501
ADAM-4501D
ADAM-4501 with 7-segment LED Display
Features
. 10/100Base-T Ethernet Interface
. Email alarm function
. Built-in Web Server
. Built-in FTP Server and Client
. Supports functionally versatile I/O modules
. Full Functions of Standard TCP and UDP Sockets
. Optional 4 digit 7-segment LED display
. Supports Modbus/RTU and Modbus/TCP function libraries
. 1.5 MB Flash ROM/640 KB SRAM
. 4 Serial Ports Available
. Integrated All Operations in Windows Utility
ADAM-4501
ADAM-4501D
Introduction
The ADAM-4501/4501D consists of compact-sized Ethernet-enabled communication controllers with a x86 CPU architecture. They support not only an Ethernet interface but also 4
serial ports, which makes them very suitable for industrial communication and control applications. The Ethernet-enabled features include built-in HTTP Server, FTP Server and email
alarm functions. The modularized I/O design provides high flexibility for versatile application requirements. The ADAM-4501/4501D also supports rich Modbus function libraries
including Modbus/RTU (Master/Slave) and Modbus/TCP (Server/Client) function libraries.
Specifications
Communication
. LAN
General
. Connectors
1 x 10/100Base-T
1.2 to 115.2 kbps
COM1: RS-232 (Full Modem Signals)
COM2, COM3: RS-485
COM4: RS-232 (Programming Port)/RS-485 (Selected
by Jumper)
1 x RJ45 (Ethernet)
. RS-485 Speed
. Serial Ports
1 x RJ48 (COM1)
2 x Plug-in terminal blocks (#14~28 AWG)
LEDs for Power, run, communication and battery
Unregulated 10 ~ 30 VDC w/power reversal protection
. Indicators
. Power Input
System
. CPU
. CPU Power
Consumption
Software
. C Library
. Operating System
40 MHz, 16-bit
4 W @ 24 VDC
Borland C++ 3.0 for DOS
ROM-DOS
. Memory
1.5 MB flash memory:
Environment
. Humidity
. Operating Temperature - 10 ~ 70° C (14 ~ 158° F)
. Storage Temperature - 25 ~ 85° C (-13 ~ 185° F)
- 256 KB system flash disk (Drive C: Read Only)
- 256 KB flash memory (accessed by function LIB)
- 1024 KB file system, 960 KB for user applications
(Drive D: Read/Write)
640 KB SRAM, up to 384 KB with battery backup
(accessed by function LIB)
5 ~ 95% RH
Ordering Information
. Real-time Clock (RTC) Yes
. Watchdog Timer
. ADAM-4501
Ethernet-enabled Communication Controller with 4 x
DI/O
Yes
Input/Output
. ADAM-4501D
ADAM-4501 with 7-segment LED Display
. Digital Input
Channels:
4
Dry Contact:
Logic level 0 : Close to GND
Logic level 1 : Open
Logic level 0 : +2 V max.
Logic level 1 : 4 V ~ 30 V
Wet Contact:
. Digital Output
Channels:
4
Open Collector to +30 V, 30 mA max. load
Power Dissipation
200 mW
RS-485 I/O Modules
4-1ꢀ
Ethernet-enabled Communication Controller
with 1 x AI/O, 2 x DI/O
ADAM-4502
ADAM-4502D
NEW
ADAM-4502 with 7-segment LED Display
1
PAC & Software
Features
. 10/100Base-T Ethernet Interface
. Email alarm function
2
BAS
. Built-in Web Server
. Built-in FTP Server and Client
3
. Supports functionally versatile I/O modules
. Full Functions of Standard TCP and UDP Sockets
. Optional 4 digit 7-segment LED display
. Supports Modbus/RTU and Modbus/TCP function libraries
. 1.5 MB Flash ROM/640 KB SRAM
. 4 Serial Ports Available
UNO
4
RS-485 I/O
5
Ethernet I/O
. Integrated All Operations in Windows Utility
6
TPC
ADAM-4502
ADAM-4502D
7
Introduction
IPPC
With Modular Design, the ADAM-4502/4502D module has all the same functionality as ADAM-4501/4501D module, but provides different I/O option. The ADAM-4502/4502D
provides one Ethernet interface and 4 serial ports just like the ADAM-4501/4501D module. Besides, the ADAM-4502/4502D module provides 1 analog input, 1 analog out, 2 digital
input and 2 digital output. Therefore, user can implement the rich interfaces to complete various different applications.
8
FPM
Specifications
9
AWS
. Digital Input
Channels:
Dry Contact:
General
. Connectors
2
1 x RJ45 (Ethernet)
1 x RJ48 (COM1)
Logic level 0 : Close to GND
Logic level 1 : Open
Logic level 0 : +2 V max.
Logic level 1 : 4 V ~ 30 V
10
Plug-in I/O
2 x Plug-in terminal blocks (#14 ~ 28 AWG)
LEDs for Power, run, communication and battery
Unregulated 10 ~ 30 VDC w/power reversal protection
Wet Contact:
. Indicators
. Power Input
11
. Digital Output
Channels:
Open Collector to +40 V, 1 A max. load
Power Dissipation
CompactPCI
2
System
. CPU
. CPU Power
Consumption
40 MHz, 16-bit
4 W @ 24 VDC
1 W load maximum
12
Signal Conditioning
Communication
. LAN
. RS-485 Speed
. Serial Ports
. Memory
1.5 MB flash memory:
1 x 10/100Base-T
1.2 to 115.2 kbps
COM1: RS-232 (Full Modem Signals)
COM2, COM3: RS-485
COM4: RS-232 (Programming Port)/RS-485 (Selected
by Jumper)
- 256 KB system flash disk (Drive C: Read Only)
- 256 KB flash memory (accessed by function LIB)
- 1024 KB file system, 960 KB for user applications
(Drive D: Read/Write)
640 KB SRAM, up to 384 KB with battery backup
(accessed by function LIB)
13
USB I/O
14
Motion Control I/O
. Real-time Clock (RTC) Yes
. Watchdog Timer
Software
. C Library
. Operating System
15
Yes
Borland C++ 3.0 for DOS
ROM-DOS
Ethernet Switch
Input/Output
. Analog Input
Channels
Input Type
Input Range
Resolution
Sampling rate
Isolation Voltage
. Analog Output
Channels
Output Type
Output Range
Slew Rate
Environment
. Humidity
. Operating Temperature - 10 ~ 70° C (14 ~ 158° F)
. Storage Temperature - 25 ~ 85° C (-13 ~ 185° F)
16
1
EDG
5 ~ 95% RH
mV, V, mA
150 mV, 500 mV, 1 V, 5 V, 10 V, 4~20 mA
17
16-bit
100 Sample/second
1000 VDC
ICOM
Ordering Information
. ADAM-4502
Ethernet-enabled Communication Controller with 1 x
AI/O, 2 x DI/O
ADAM-4502 with 7-segment LED Display
1
V, mA
. ADAM-4502D
0 ~ 10 V, 0 ~ 20 mA, 4 ~ 20 mA
1 V/μs
Isolation Voltage
1000 VDC
Online Download
4-1ꢁ
RS-422/485 Repeaters
ADAM-4510/4510S
ADAM-4520/4522
ADAM-4521
RS-232 to RS-422/485 Converters
Addressable RS-422/485 to RS-232
Converter
ADAM-4510/4510S
ADAM-4520/4522
ADAM-4521
Specifications
Specifications
Specifications
General
General
General
. Connectors
2 x Plug-in terminal
blocks (#14 ~ 22 AWG)
(RS-422/485)
. Connectors
1 x Plug-in terminal
block (#14 ~ 22 AWG)
(RS-422/485)
. Connectors
1 x Plug-in terminal
block (#14 ~ 22 AWG)
(RS-422/485)
1 x DB9-F (RS-232)
1 x DB9-F (RS-232)
. Isolation Voltage
3000 VDC
(4510S only)
. Isolation Voltage
3000 VDC
. Isolation Voltage
1000 VDC
(4520 only)
1.2 W @ 24 VDC
. Power Consumption
1.4 W @ 24 VDC
. Power Consumption
. Built-in microprocessor and watchdog timer
1.0 W @ 24 VDC
. Power Consumption
Serial Communications
. Input
Serial Communications
. Input
. Output
Serial Communications
. Input
RS-485 (2-wire) or
RS-422 (4-wire)
RS-485 (2-wire) or
RS-422 (4-wire)
1200, 2400, 4800,
9600, 19.2 k, 38.4 k,
57.6 k, 115.2 k, RTS
control and RS-422
(switchable)
RS-232 (4-wire)
RS-485 (2-wire) or
RS-422 (4-wire)
1200, 2400, 4800,
9600, 19.2 k, 38.4 k,
57.6 k, 115.2 k, RTS
control and RS-422
(switchable)
RS-485 (2-wire) or
RS-422 (4-wire)
RS-232 (4-wire)
300, 600, 1200, 2400,
4800, 9600, 19.2 k,
38.4 k, 57.6 k, 115.2 k
(software configurable)
. Output
. Output
. Speed Modes (bps)
. Speed Modes (bps)
. Speed Modes (bps)
. RS-232 and 485 can be set to different
baudrates
. RS-485 surge protection and automatic
RS-485 data flow control
. Software configurable to either addressable
or non-addressable mode
Common Specifications
Ordering Information
. ADAM-4510
RS-422/485 Repeater
General
. ADAM-4510S
Isolated RS-422/485
Repeater
. Power Input
Unregulated 10 ~ 30 VDC w/power reversal protection
. ADAM-4520
. ADAM-4522
. ADAM-4521
Isolated RS-232 to RS-
422/485 Converter
RS-232 to RS-422/485
Converter
Addressable RS-422/485
to RS-232 Converter
Environment
. Operating Temperature - 10 ~ 70° C (14 ~ 158° F)
. Storage Temperature - 25 ~ 85°C (-13 ~ 185° F)
. Humidity
5 ~ 95% RH
RS-485 I/O Modules
4-14
Multi-mode Fiber Optic to RS-232/422/485
Converter
Single-mode Fiber Optic to RS-232/422/485
Converter
1-port Isolated USB to RS-232/422/485
Converters
ADAM-4541
ADAM-4542+
ADAM-4561/4562
1
PAC & Software
2
BAS
3
UNO
4
RS-485 I/O
ADAM-4541
ADAM-4542+
ADAM-4561/4562
5
Ethernet I/O
Specifications
Specifications
Specifications
6
TPC
General
. Power Input
. Connectors
General
. Power Input
. Connectors
General
. Connectors
Network: USB-type A connector (type A to type B
cable provided)
Serial:
ADAM-4561
ADAM-4562
Unregulated 10 ~ 30 VDC
Unregulated 10 ~ 30 VDC
7
1 x Plug-in terminal
block (#14 ~ 22 AWG)
(RS-232/422/485)
2 x ST fiber connector
1.5 W @ 24 VDC
1 x Plug-in terminal
block (#14 ~ 22 AWG)
(RS-232/422/485)
1 x SC fiber connector
1.5 W @ 24 VDC
IPPC
1 x Plug-in terminal
(#14~22 AWG)
(3-wire
RS-232/422/485)
1 x DB-9 serial
connectors
8
FPM
. Power Consumption
. Power Consumption
Serial Communications
. Communication Mode Asynchronous
. Speed Modes (bps)
Serial Communications
. Communication Mode Asynchronous
. Speed Modes (bps)
9
AWS
1200, 2400, 4800,
9600, 19.2 k, 38.4 k,
57.6 k, 115.2 k and
RS-232/422 mode
(switchable)
1200, 2400, 4800,
9600, 19.2 k, 38.4 k,
57.6 k, 115.2 k and
RS-232/422 mode
(swtichable)
(9-wire RS-232)
. Isolation Voltage
ADAM-4561:
ADAM-4562:
. Power Consumption
ADAM-4561:
ADAM-4562:
10
3000 VDC
2500 VDC
Plug-in I/O
. Transmission Mode
Full/half duplex,
bidirectional
. Transmission Modes
Full/half duplex,
bidirectional
11
1.5 W @ 5 V
1.1 W @ 5 V
Windows 98/2000/XP
CompactPCI
. Driver Support
. Full Compliance with USB v1.1 specifications
Fiber Optic Communications
. Optical Power Budget 12.5 dB (measured with
(attenuation)
. Transmission Distance 2.5 km
Fiber Optic Communications
. Optical Power Budget 15 dB
(attenuation)
. Transmission Distance 15 km
12
Signal Conditioning
62.5/125 mm)
Serial Communications
. Speed Modes (bps)
. Transmission Modes
75 bps to 115.2 kbps
Full/half duplex,
bidirectional
. Transmission Mode
Multi mode
(Send and Receive)
820 nm
. Transmission Mode
Single mode
(Send and Receive)
1310 nm
13
USB I/O
. Wavelength
. Wavelength
14
Motion Control I/O
15
Ethernet Switch
Common Specifications
Ordering Information
16
EDG
. ADAM-4541
Multi-mode Fiber Optic
to RS-232/422/485
Converter
Single-mode Fiber Optic
to RS-232/422/485
Converter
Environment
. Humidity
. Operating Temperature -10 ~ 70° C (14 ~ 158° F)
. Storage Temperature -25 ~ 85°C (-13 ~ 185°F)
5 ~ 95% RH
17
ICOM
. ADAM-4542+
. ADAM-4561
1-port Isolated USB to
RS-232/422/485 Converter
. ADAM-4562
1-port Isolated USB to
RS-232 Converter
4-1ꢂ
1-ch Thermocouple Input Modules
(with 7-segment LED Display)
ADAM-4011/4011D
ADAM-4012
ADAM-4013
1-ch Analog Input Module
1-ch RTD Input Module
ADAM-4012
ADAM-4013
ADAM-4011/4011D
Specifications
Specifications
Specifications
General
General
General
. Power Consumption
. Support Protocol
. Power Consumption
. Support Protocol
0.7 W @ 24 VDC
ASCII command
.
.
.
Power Consumption
Support Protocol
LED Indicators
1.4 W @ 24 VDC
ASCII command
5-digit (ADAM-4011D)
1.2 W @ 24 VDC
ASCII command
Analog Input
. Channels
. Input Connections
. Input Impedance
. Input Type
Analog Input
Analog Input
. Channels
. Input Impedance
.
.
Channels
1
1
1
Input Impedance
Voltage: 2 MΩ
Current: 125 Ω
(Added by users)
T/C, mV, V or mA
15 mV, 50 mV, 100 mV,
500 mV, 1 V,
2.5 V, 20 mA
Voltage mode: 0.1% or
better
2, 3, or 4-wire
2 MΩ
Pt or Ni RTD
Voltage: 20 MΩ
Current: 125 Ω
(Added by users)
mV, V or mA
150 mV, 500 mV,
V, 5 V, 10 V and 20
mA
Voltage mode: 0.1% or
better
.
.
Input Type
Input Range
. Input Type
. Input Range
. RTD Types and Temperature Ranges
IEC RTD 100 ohms
1
.
.
Accuracy
Pt
Pt
Pt
Pt
-100° C
0° C
0° C
0° C
to
to
to
to
+100° C a = 0.00385
+100° C a = 0.00385
+200° C a = 0.00385
+600° C a = 0.00385
Current mode: 0.2% or
better
. Accuracy
T/C Type and Temperature Range
Current mode: 0.2%
or better
JIS RTD 100 ohms
J
0 ~ 760° C
R
S
B
500 ~1750° C
500 ~1750° C
500 ~1800° C
Pt
Pt
Pt
Pt
-100° C
0° C
0° C
0° C
to
to
to
to
+100° C a = 0.003916
+100° C a = 0.003916
+200° C a = 0.003916
+600° C a = 0.003916
. Span Drift
. Zero Drift
25 ppm/° C
6 μV/° C
K
T
E
0 ~ 1370° C
-100 ~ 400° C
0 ~ 1000° C
Digital Input
. Channels
.
.
.
Span Drift
Zero Drift
Wire Burnout Detector
25 ppm/° C
6 μV/° C
Ni RTD
1
Ni
-80° C
to
to
+100° C
+100° C
ADAM-4011D only
Logic level 0: +1 V max.
Logic level 1: 3.5 ~ 30 V
pull up current: 0.5 mA,
10 kΩ resistor to +5 V
Max. input freq.: 50 Hz
Min. input pulse width:
1 msec.
Ni
0° C
Digital Input
. Accuracy
. Span Drift
. Zero Drift
0.1% or better
25 ppm/° C
3 μV/° C
.
Channels
1
Logic level 0: 1 V max.
Logic level 1: 3.5 ~ 30 V
Pull up current: 0.5 mA,
10 kΩ resistor to +5 V
Max. input freq: 50 Hz
. Event Counter
.
Event Counter
Digital Output
Digital Output
. Channels
.
Channels
2, open collector to
30 V, 30 mA max. load
300 mW
2, open collector to 30
V, 30 mA max. load
300 mW
.
Power Dissipation
. Power Dissipation
Common Specifications
General
Ordering Information
. Sampling Rate
. CMR @ 50/60 Hz
. NMR @ 50/60 Hz
. Isolation Voltage
10 sample/second
150 dB
100 dB
. ADAM-4011
1-ch Thermocouple Input
Module
. Power Input
Unregulated 10~30 VDC
. ADAM-4011D
ADAM-4011 with
7-segment LED Display
. Connectors
1 x Plug-in terminal
blcok (#14 ~ 22 AWG)
3000 VDC
. ADAM-4012
. ADAM-4013
1-ch Analog Input Module
1-ch RTD Input Module
Environment
. Humidity
. Operating Temperature -10~70° C (14~158° F)
. Storage Temperature -25~85°C (-13~185°F)
. Watchdog Timer
System (1.6 second)
5 ~ 95% RH
Analog Input
. Resolution
16-bit
RS-485 I/O Modules
4-1ꢃ
6-ch RTD Module with Modbus®
6-ch Thermistor Module with Modbus
1-ch Analog Input/Output Module
ADAM-4015
ADAM-4015T
ADAM-4016
1
PAC & Software
2
BAS
3
UNO
4
RS-485 I/O
ADAM-4015
ADAM-4015T
ADAM-4016
5
Ethernet I/O
Specifications
General
Specifications
Specifications
General
6
TPC
General
. Connectors
.
Connectors
2 x Plug-in terminal block
(#14 ~ 28 AWG)
1.2 W @ 24 VDC
System (1.6 second) &
Communication
ASCII command and
Modbus/RTU
. Connectors
2 x Plug-in terminal
block (#14 ~ 22 AWG)
2.2 W @ 24 VDC
System (1.6 second)
ASCII command
2 x Plug-in terminal
block (#14 ~ 28 AWG)
1.2 W @ 24 VDC
System (1.6 second) &
Communication
7
.
.
Power Consumption
Watchdog Timer
. Power Consumption
. Watchdog Timer
. Support Protocol
Analog Input
. Channels
. Input Impedance
IPPC
. Power Consumption
. Watchdog Time
.
Support Protocol
8
FPM
. Support Protocol
ASCII command and
Modbus/RTU
.
Wire Burnout Detector
Yes
1 differential
Voltage: 2 MΩ
Current: 125 Ω
(Added by users)
mV and mA
15 mV, 50 mV, 100
mV, 500 mV, 20 mA
Voltage mode: 0.1% or
better
Current mode: 0.2%
or better
150 dB
25 ppm/° C
6 μV/° C
Analog Input
Channels
Input Connections
Input Impedance
Input Type
RTD Types and Temperature Ranges
Pt 100 RTD:
Pt -50° C
Pt 0° C
Pt 0° C
Pt 0° C
Pt -200° C
IEC RTD 100 ohms (a = 0.00385)
JIS RTD 100 ohms (a = 0.00392)
Pt 1000 RTD
Pt -40° C
Balco 500 RTD
-30° C
Ni 50 RTD
Ni -80° C
Ni 508 RTD
Ni 0° C
. Wire Burnout Detector Yes
.
.
.
.
.
6 differential
9
AWS
2, 3, or 4-wire
10 MΩ
Pt, Balco and Ni RTD
Analog Input
. Channels
. Input Connections
. Input Impedance
. Input Type
. Thermistor Types and Temperature Ranges
Thermistor 3 k
Thermistor 10 k
. Accuracy
. lnput Type
. lnput Range
6 differential
2, 3-wire
10 MΩ
10
. Accuracy
Plug-in I/O
to
to
to
to
to
150° C
100° C
200° C
400° C
200° C
Thermistor
11
0 ~ 100° C
0 ~ 100° C
0.1% or better
120 dB
25 ppm/° C
3 μV/° C
CompactPCI
. CMR @ 50/60 Hz
. Span Ddrift
. Zero Drift
12
. CMR @ 50/60 Hz
. Span Drift
. Zero Drift
Signal Conditioning
Analog Output
. Channels
. Accuracy
. Output Type
. Output Range
. Drift
. Drive Current
. Isolation Voltage
to
to
to
to
to
160° C
120° C
100° C
100° C
600° C
0.1% or better
120 dB
25 ppm/° C
3 μV/° C
1
0.05% of FSR
V
0 ~ 10 V
50 ppm/° C
30 mA
13
USB I/O
14
3000 VDC
Motion Control I/O
BA1
-200° C
Accuracy
CMR @ 50/60 Hz
Span Drift
Digital Output
. Channels
.
.
.
.
15
4, open collector to
30 V, 30 mA max. load
300 mW
Ethernet Switch
Zero Drift
. Power Dissipation
16
EDG
Common Specifications
General
Ordering Information
Environment
. Humidity
. Operating Temperature - 10 ~ 70° C
ADAM-4015
ADAM-4015T
ADAM-4016
6-ch RTD Input Module
with Modbus
17
. Power Input
Unregulated 10 ~ 30 VDC
5 ~ 95% RH
ICOM
6-ch Thermistor Input
Module with Modbus
Analog Input
. Resolution
. NMR @ 50/60 Hz
. Sampling Rate
. Isolation Voltage
(14 ~ 158° F)
16 bits
100 dB
10 sample/second (total)
3000 VDC
. Storage Temperature - 25 ~ 85°C
1-ch Analog Input/Output
Module
(-13 ~ 185° F)
4-1ꢄ
8-ch Analog Input Modules with
Modbus®
8-ch Thermocouple Input Modules
with Modbus
8-ch Universal Analog Input Module
with Modbus
ADAM-4017/4017+
ADAM-4018/4018+
ADAM-4019+
ADAM-4018/4018+
ADAM-4017/4017+
ADAM-4019+
Specifications
Specifications
Specifications
General
. Power Consumption
. Watchdog Timer
General
General
. Power Consumption
. Watchdog Timer
.
.
Power Consumption
Watchdog Timer
0.8 W @ 24 VDC
ADAM-4018:
System (1.6 second)
ADAM-4018+:
System (1.6 second) &
Communication
ASCII command
(ADAM-4018)
ASCII command and
Modbus/RTU
1.2 W @ 24 VDC
ADAM-4017:
System (1.6 second)
ADAM-4017+:
System (1.6 second) &
Communication
ASCII command
(ADAM-4017)
ASCII command and
Modbus/RTU
1.0 W @ 24 VDC
System (1.6 second) &
Communication
ASCII command and
Modbus/RTU
. Support Protocol
.
Support Protocol
. Support Protocol
Analog Input
. Channels
8 differential channels
for individual input type
(ADAM-4018+)
. Channel Independent Yes
Configuration
. Input Impedance
Analog Input
(ADAM-4017+)
.
Channels
ADAM-4018: 6 differential,
and 2 single-ended
ADAM-4018+: 8 differential
ADAM-4018+ only
Voltage: 20 MΩ
Analog Input
. Channels
Current: 120 Ω
T/C, mV, V, mA
1 V, 2.5 V, 5 V,
10 V, 100 mV,
500 mV, 20 mA,
4 ~ 20 mA
ADAM-4017:
6 differential, and 2
single-ended
ADAM-4017+:
8 differential
.
.
Channel Independent
Configuration
Input Impedance
. Input Type
. Voltage/Current
Input Range
Voltage: 20 MΩ
Current: 120 Ω
(4018+ only)
.
.
lnput Type
ADAM-4018
Thermocouple, mV, V, mA
ADAM-4018+
Thermocouple, mA
ADAM-4018 15 mV,
50 mV, 100 mV, 500 mV,
1 V, 2.5 V, 20 mA
ADAM-4018+
. Channel Independent ADAM-4017+ only
Configuration
. Input Impedance
. T/C Types and Temperature Ranges
Voltage: 20 MΩ
Current: 120 Ω
(4017+ only)
Voltage/Current
Input Range
J
0 ~ 760 °C
0 ~ 1370 °C
-100 ~ 400 °C
0 ~ 1000 °C
R
S
B
500 ~ 1750 °C
500 ~ 1750 °C
500 ~ 1800 °C
K
T
E
. lnput Type
. lnput Range
ADAM-4017
mV, V, mA
20 mA, 4 ~ 20 mA
. Burn-out Detection
4 ~ 20 mA & all T/C
.
.
T/C Types and Temperature Ranges
150 mV, 500 mV, 1 V,
5 V, 10 V, 20 mA
150 mV, 500 mV, 1 V,
5 V, 10 V, 20 mA,
4 ~ 20 mA
J
0 ~ 760° C
R
S
B
500 ~1750° C
500 ~1750° C
500 ~1800° C
K
T
E
0 ~ 1370° C
-100 ~ 400° C
0 ~ 1000° C
ADAM-4017+
Burn-out Detection
All T/C (ADAM-4018+ only)
Common Specifications
.
.
.
.
.
.
.
Isolation Voltage
Overvoltage Protection
CMR @ 50/60 Hz
NMR @ 50/60 Hz
Span Drift
Zero Drift
Built-in TVS/ESD Protection
3000 VDC
35 VDC
120 dB
100 dB
25 ppm/° C
6 μV/° C
Ordering Information
. ADAM-4017
. ADAM-4017+
. ADAM-4018
. ADAM-4018+
. ADAM-4019+
8-ch Analog Input
Module
General
.
.
Power Input
Connectors
Unregulated 10 ~ 30 VDC
2 x Plug-in terminal block
(#14 ~ 22 AWG)
8-ch Analog Input Module
with Modbus
8-ch Thermocouple Input
Module
8-ch Thermocouple Input
Module with Modbus
8-ch Universal Analog
Input Module with Modbus
Analog Input
.
Accuracy
Voltage mode: 0.1% or
better
Environment
.
.
Humidity
5 ~ 95% RH
Current mode: 0.2%
or better
Operating Temperature -10 ~ 70° C
(14 ~ 158° F)
-25 ~ 85°C
(-13 ~ 185° F)
.
.
Resolution
Sampling Rate
16-bit
.
Storage Temperature
10 sample/second (total)
RS-485 I/O Modules
4-1ꢅ
1-ch Analog Output Module
ADAM-4021
ADAM-4022T
ADAM-4024
2-ch Serial Based Dual Loop PID Controller
with Modbus®
4-ch Analog Output Module with Modbus
1
PAC & Software
2
BAS
3
UNO
4
RS-485 I/O
ADAM-4021
ADAM-4022T
ADAM-4024
5
Ethernet I/O
Specifications
Specifications
Specifications
6
TPC
General
. Connectors
General
Connectors
General
Connectors
.
2 x Plug-in terminal
block (#14 ~ 28 AWG)
4 W @ 24 VDC
System (1.6 second)
ASCII command and
Modbus/RTU
.
2 x plug-in terminal
blocks (#14 ~ 28 AWG)
3 W @ 24 VDC
System (1.6 second) &
Communication
2 x Plug-in terminal
block (#14 ~ 22 AWG)
1.4 W @ 24 VDC
System (1.6 second)
ASCII command
7
.
.
.
Power Consumption
Watchdog Timer
Support Protocol
IPPC
.
.
Power Consumption
Watchdog Timer
. Power Consumption
. Watchdog Timer
. Support Protocol
8
.
Support Protocol
ASCII command and
Modbus/RTU
Analog Input
Channels
Input Type
Input Range
FPM
.
.
.
4
Analog Output
. Channels
. Output Impedance
. Output Range
mA, V, Thermistor, RTD
0 ~ 20 mA, 4 ~ 20 mA,
0 ~ 10 V
1
Analog Output
Channels
Output Impedance
Output Range
9
AWS
0.5 Ω
0 ~ 20 mA, 4 ~ 20 mA,
0 ~ 10 V
.
.
.
4
.
Thermistor Type and Temperature Ranges
Thermistor 3K:
Thermistor 10K:
RTD Type and Temperature Ranges
Pt 100 RTD
Pt 0 ~ 100° C
Pt 0 ~ 600° C
0 ~ 100° C
0 ~ 100° C
0.5 Ω
0 ~ 20 mA, 4 ~ 20mA,
10 V
.
10
. Output Type
. Accuracy
mA, V
Plug-in I/O
.
.
Output Type
Accuracy
mA, V
Pt -100 ~ 100° C
Pt 0 ~ 200° C
0.1% of FSR for
current output
0.2% of FSR for
voltage output
0.1 % of FSR for current
output
0.1 % of FSR for voltage
output
0 to 500 Ω (source)
12-bit
3000 VDC
0.125 ~ 128 mA/sec.
0.0625 ~ 64.0 V/sec.
25 ppm/° C
IEC RTD 100 ohms (a = 0.00385)
JIS RTD 100 ohms (a = 0.00392)
Pt 1000 RTD
11
CompactPCI
Pt -40 ~ 160° C
16-bit
10 sample/second
3000 VDC
.
.
.
Resolution
. Current Load Resistor 0 to 500 Ω (source)
. Resolution
. Isolation Voltage
. Programmable
Output Slope
. Readback Accuracy
. Span Temperature
Coefficient
.
.
.
.
Current Load Resistor
Resolution
Isolation Voltage
Programmable Output
Slope
Span Temperature
Coefficient
Sampling Rate
12-bit
3000 VDC
0.125 ~ 128 mA/sec.
0.0625 ~ 64.0 V/sec.
1% of FSR
25 ppm/° C
Isolation Voltage
12
Signal Conditioning
Analog Output
Channels
Output Range
.
.
2
0 ~ 20 mA, 4 ~ 20 mA,
0 ~ 10 V
13
.
.
USB I/O
.
.
.
Output Type
mA,V
12-bit
3000 VDC
Resolution
Zero Drift
Voltage output:
30 μV/° C
Current output:
0.2 μA/° C
Isolation Voltage
14
Digital Input
Channels
Dry Contact
. Zero Drift
Voltage output:
30 μV/° C
current output:
0.2 μA/° C
Motion Control I/O
.
.
2
Logic level 0-close to GND
Logic level 1-open
Digital Input
Channels
Input Level
15
Digital Output
Channels
Ethernet Switch
.
.
4
.
2
Logic level 0.: +1V max
Logic level 1: 10 ~ 30 VDC
3000 VDC
Open Collector to 30 V,
30 mA max. load
300 mW
16
.
Power Dissipation
.
Isolation Voltage
EDG
Common Specifications
Ordering Information
17
ICOM
. ADAM-4021
1-ch Analog Output
Module
General
. Power Input
Environment
. Humidity
. Operating Temperature - 10~ 70° C
. ADAM-4022T
2-ch Serial Based Dual
Loop PID Controller with
Modbus
Unregulated 10 ~ 30 VDC
5 ~ 95% RH
(14 ~ 158° F)
. ADAM-4024
4-ch Analog Output
Module with Modbus
. Storage Temperature - 25 ~ 85°C
(-13 ~ 185° F)
4-1ꢆ
15-ch Digital I/O Module
ADAM-4050
ADAM-4051
ADAM-4052
16-ch Isolated Digital Input Module
with Modbus®
8-ch Isolated Digital Input Module
ADAM-4050
ADAM-4051
ADAM-4052
Specifications
Specifications
Specifications
General
General
General
. Connectors
2 x plug-in terminal
blocks (#14 ~ 22 AWG)
. Connectors
2 x plug-in terminal
blocks (#14 ~ 28 AWG)
. Connectors
2 x Plug-in terminal
blocks (#14 ~ 22 AWG)
. Power Consumption
. Watchdog Timer
. Support Protocol
0.4 W @ 24 VDC
System (1.6 second)
ASCII command
. Power Consumption
. Watchdog Timer
1 W @ 24 VDC
System (1.6 second) &
Communication
ASCII command and
Modbus/RTU
. Power Consumption
. Watchdog Timer
. Support Protocol
0.4 W @ 24 VDC
System (1.6 second)
ASCII command
. Support Protocol
Digital Input
Digital Input
. LED Indicators
Yes
. Channels
7
. Channels
8
(6 fully independent
isolated channels, 2
isolated channels with
common ground)
Logic level 0: +1 V max.
Logic level 1: +3 ~ 30 V
. Input Level
Logic level 0: +1 V max.
Logic level 1: 3.5 ~ 30 V
Pull up current: 0.5 mA,
10 kΩ resistor to +5 V
Digital Input
. Channels
. Input Voltage
. Input Level
16
50 V max
. Input Level
Digital Output
. Channels
Dry contact:
Logic level 0: open
Logic level 1: close to
GND
Logic level 0: +3 V max
Logic level 1: +10~ 50 V
8
. Isolation Voltage
. Input Resistance
5000 VRMS
3 kΩ
open collector to 30 V,
30 mA max. load
300 mW
Wet contact:
. Power Dissipation
(Note: The Digital Input Level 0 and 1 status can be
inverted)
. Isolation Voltage
2500 VDC
. Input Resistance
5.2 kΩ
. Overvoltage Protection 70 VDC
Common Specifications
Ordering Information
. ADAM-4050
15-ch Digital I/O Module
Environment
. Humidity
. Operating Temperature - 10 ~ 70° C
General
. ADAM-4051
16-ch Isolated Digital
Input Module with Modbus
5 ~ 95% RH
. Power Input
Unregulated 10 ~ 30 VDC
. ADAM-4052
8-ch Isolated Digital Input
Module
(14 ~ 158° F)
. Storage Temperature - 25 ~ 85°C
(-13 ~ 185° F)
RS-485 I/O Modules
4-ꢀ0
16-ch Digital Input Module
ADAM-4053
16-ch Isolated Digital I/O Module
ADAM-4055
with Modbus®
12-ch Sink/Source Type Isolated
Digital Output Modules with Modbus
ADAM-4056S/4056SO
1
PAC & Software
2
BAS
3
UNO
4
RS-485 I/O
ADAM-4056S/4056SO
ADAM-4053
ADAM-4055
5
Ethernet I/O
Specifications
Specifications
Specifications
6
TPC
General
. Connectors
General
. Connectors
General
. Connectors
2 x Plug-in terminal
blocks (#14 ~ 22 AWG)
System (1.6 second)
ASCII command
2 x Plug-in terminal
blocks (#14 ~ 28 AWG)
System (1.6 second)
& Communication
ASCII command and
Modbus/RTU
2 x Plug-in terminal
blocks (#14~22 AWG)
System (1.6 second) &
Communication
ASCII command and
Modbus/RTU
7
IPPC
. Watchdog Timer
. Support Protocol
. Watchdog Timer
. Watchdog Timer
. Support Protocol
. Isolation Voltage
. Digital Output Channels 12
. LED Indicators
. Support Protocol
8
Digital Input
. Channels
. Input Level
Dry contact:
FPM
. Isolation Voltage
. LED Indicators
2500 VDC
Yes
5000 VDC
16
9
Logic level 0: close to
GND
Logic level 1: open
Logic level 0: +2 V max.
Logic level 1: +4 ~ 30 V
Yes
AWS
Digital Input
. Channels
. Input Level
Dry Contact:
ADAM-4056S
. Digital Output
8
10
Wet contact:
Open collector to 40V
(200mA max. load)
Channel: 1 W max
Total: 2.2 W
(8 Channels)
Sink
Plug-in I/O
Logic level 0: open
Logic level 1: close to
GND
Logic level 0: +3 Vmax
Logic level 1: +10 ~ 50 V
. Effective Distance
(dry contact only)
500 m max.
. Power Dissipation
11
Wet Contact:
CompactPCI
. Digital Output Type
(Note: The Digital Input Level 0 and 1 status can be
inverted)
. Overvoltage Protection 70 VDC
12
ADAM-4056SO
. Digital Output
Signal Conditioning
VCC: 10 ~ 35 VDC
Current: 1A
(per channel)
Digital Output
. Channels
13
USB I/O
8, open collector to 40 V
(200 mA max. load)
Channel: 1W max
. Digital Output Type
. Over Current Detection and Protection
Source
. Power Dissipation
14
Total: 2.2W (8 Channels)
Motion Control I/O
15
Ethernet Switch
Ordering Information
16
. ADAM-4053
16-ch Digital Input Module
16-ch Isolated Digital
I/O Module with Modbus
12-ch Sink Type Isolated
Digital Output Module with
Modbus
12-ch Source Type Isolated
Digital Output Module with
Modbus
EDG
. ADAM-4055
Common Specifications
17
. ADAM-4056S
. Power Input
Unregulated 10 ~ 30 VDC
1W @ 24 VDC
Environment
. Humidity
. Operating Temperature -10 ~ 70°C
ICOM
. Power Consumption
5 ~ 95% RH
. ADAM-4056SO
(14 ~ 158° F)
. Storage Temperature -25 ~ 85°C
(-13 ~ 185° F)
4-ꢀ1
4-ch Relay Output Module
ADAM-4060
ADAM-4068
ADAM-4069
8-ch Relay Output Module with Modbus®
8-ch Power Relay Output Module with Modbus
ADAM-4060
ADAM-4068
ADAM-4069
Specifications
Specifications
Specifications
General
General
General
. Connectors
2 x plug-in terminal
blocks (#14 ~ 22 AWG)
. Connectors
2 x plug-in terminal
blocks (#14 ~ 28 AWG)
. Connectors
2 x plug-in terminal
blocks (#14 ~ 28 AWG)
. Power Consumption
. Watchdog Timer
. Support Protocol
0.8 W @ 24 VDC
System (1.6 second)
ASCII command
. Power Consumption
. Watchdog Timer
0.6 W @ 24 VDC
System (1.6 second) &
Communication
ASCII command and
Modbus/RTU
. Power Consumption
. Watchdog Timer
2.2 W @ 24 VDC
System (1.6 second) &
Communication
ASCII command and
Modbus/RTU
. Support Protocol
. Support Protocol
Relay Output
Relay Output
Relay Output
. Breakdown Voltage
500 VAC (50/60 Hz)
. Breakdown Voltage
500 VAC (50/60 Hz)
. Breakdown Voltage
1000 VAC (50/60 Hz)
. Channels
4 x form A
4 x form C
. Channels
2 x form A
2 x form C
. Channels
4 x form A
4 x form C
. Contact Rating
(Resistive)
AC: 0.5 A @ 120 V
0.25 A @ 240 V
DC: 1 A @ 30 V
0.3 A @ 110 V
. Contact Rating
(Resistive)
AC: 0.6 A @ 125 V
0.3 A @ 250 V
DC: 2 A @ 30 V
0.6 A @ 110 V
. Contact Rating
(Resistive)
. Initial Insulation
Resistance
. Relay off Time (typical) 5.6 ms
. Relay on Time (typical) 5 ms
AC: 5 A @ 250 V
DC: 5 A @ 30 V
1 GΩ min. at 500 VDC
. Initial Insulation
Resistance
. Relay off Time (typical) 4 ms
1 G Ω min. at 500 VDC
. Initial Insulation
Resistance
. Relay off Time (typical) 2 ms
1 G Ω min. at 500 VDC
. Relay on Time (typical) 3 ms
. Relay on Time (typical) 3 ms
Common Specifications
. Power Input
Unregulated 10 ~ 30 VDC
Environment
. Humidity
. Operating Temperature -10 ~ 70° C
Ordering Information
5 ~ 95% RH
. ADAM-4060
4-ch Relay Output Module
(14 ~ 158° F)
. ADAM-4068
8-ch Relay Output Module
with Modbus
. Storage Temperature -25 ~ 85°C
(-13 ~ 185° F)
. ADAM-4069
8-ch Power Relay Output
Module with Modbus
RS-485 I/O Modules
4-ꢀꢀ
2-ch Counter/Frequency
Modules (with
ADAM-4080/4080D
ADAM-4914V
7-segment LED Display)
4-ch Voltage Input Surge
Protection Module
1
PAC & Software
2
BAS
3
UNO
4
RS-485 I/O
5
Ethernet I/O
6
TPC
ADAM-4080/4080D
ADAM-4914V
7
Specifications
Specifications
IPPC
General
General
. Connectors
. Humidity
. Operating Temperature -10 ~ 70° C (14 ~ 158° F)
. Storage Temperature -25 ~ 85° C (-13 ~ 185° F)
. Input Channels
.
.
.
.
.
.
.
Connectors
2 x Plug-in terminal block (#14 ~ 22 AWG)
2.0 W @ 24 VDC
Unregulated 10 ~ 30 VDC
5 ~ 95% RH
8
2 x Plug-in terminal block (#14 ~ 22 AWG)
5 ~ 95% RH
FPM
Power Consumption
Power Input
Humidity
Operating Temperature -10 ~ 70° C (14 ~ 158° F )
Storage Temperature
Watchdog Timer
9
AWS
4 differential voltage and thermocouple input
-25 ~ 85° C (-13 ~ 185° F)
System (1.6 second)
ASCII command
5-digit readout, CH 0 or CH 1 (programmable)
(ADAM-4080D only)
Performance
. Discharge Current
. Discharge Voltage
10
. Support Protocol
LED Indicators
5000 A (8/20 μsec.)
Between Lines: 18 V min.
Line to GND: 350 V max.
Approx. 20 Ω including
return
Between Lines: 23 V min.
Line to GND: +4,000 V max.
Between Lines: ≤ 10 μA @ 7.5 VDC
Line to GND: ≤ 5 μA @ +140 VDC
Plug-in I/O
.
11
. Internal Series
Resistance
. Max. Surge Voltage
Counter Input
CompactPCI
.
Channels
2 independent 32-bit counters
50 kHz max.
(non-isolation)
>10 μs.
lsolated or non-isolated
Logic level 0: +1 V max.
Logic level 1: 3.5~30 V
.
Input Frequency
12
Signal Conditioning
.
.
.
Input Pulse Width
Input Mode
Isolated Input Level
. Leakage Current
. Maximum Line Voltage 10 V
. Response Time
13
USB I/O
≤ 0.1 μsec.
.
Isolation Voltage
2500 VRMS
. Non-isolated
Input Level
Programmable threshold:
Logic level 0: +0.8 V max.
Logic level 1: 2.4 ~ 5.0 V
4,294,967,295 (32 bits)
Absolute or relative (ADAM-4080 only)
2 μs ~ 65 ms
14
Motion Control I/O
.
.
.
Maximum Count
Preset Type
Programmable Digital
Noise Filter
15
Ethernet Switch
.
Alarm
ADAM-4080: Alarm comparators on each counter
ADAM-4080D: High and Low comparators on counter 0
16
EDG
Frequency Measurement
.
Range
5 Hz ~ 50 kHz
Ordering Information
17
.
Programmable Built-in 1 or 0.1 second
ICOM
. ADAM-4080/4080D
2-ch Counter/Frequency Modules
(with 7-segment LED Display)
4-ch Voltage Input Surge Protection Module
Gate Time
. ADAM-4914V
Digital Output
.
.
.
Channels
Open Collector
Power Dissipation
2
30 V, 30 mA max. load
300 mW for each channel
Online Download
4-ꢀꢁ
ADAM-4000 Series Common Specifications
Communication
. RS-485 (2-wire) to host
Dimensions
. Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
(ADAM-4080, ADAM-4080D only support up to 38400 bps)
Unit: mm
. Maximum communication distance: 4000 feet (1.2 km)
. Power and communication LED indicator
. ASCII command/response protocol (Selected modules with Modbus protocol)
. Communication error checking with checksum
. Asynchronous data format:
Advantech (ASCII command) protocol: 1 start bit
(parity check, data bit, stop bit) = (None, 8, 1)
Modbus protocol for ADAM-4000 modules: 1 start bit
(parity check, data bit, stop bit) = (None, 8, 1)
Modbus protocol for ADAM-4100 series modules: 1 start bit
(parity check, data bit, stop bit) = (None, 8, 1) (None, 8, 2) (Even, 8, 1) (Odd, 8, 1)
. Up to 256 multidrop modules per serial port
. Online module insertion and removal
. Transient suppression on RS-485 communication lines
Mechanism
. Dimensions
. Enclosure
. Mounting
70 x 122 x 30 mm (W x H x D)
ABS + PC
DIN 35 rail, stack, wall
RS-485 I/O Modules
4-ꢀ4
|