®
NetBotz Rope Leak Sensor (NBES0308)
Installation Instructions
Inventory
6.1-m (20-ft) rope leak sensor (1)
203-mm (8-in) tie wrap (18)
Adhesive cable tie holder (18)
Rope sensor cable adapter (1)
4.6-m (15-ft) CAT-5 cable
Installation
Caution: Use the Rope Leak Sensor with a NetBotz Rack Monitor 450 or NetBotz Rack
Monitor 550 only. Make sure you connect the sensor to the appliance as shown.
Note: You can extend the total length of the Rope Leak Sensor up to 30.5 m (100 ft)
using NetBotz 6.1-m (20-ft) Rope Leak Sensor Extensions (NBES0309).
990-3374
5/08
© 2008 American Power Conversion. All rights reserved. All APC trademarks are property of American
Power Conversion. Other trademarks are property of their respective owners.
*990-3374*
|