VP3D1
3D Video Processor
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
viewsonic.com in English, or in specific languages using the Regional selection box in
the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente
las instrucciones en este manual”
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this unit near water.
Clean with a soft, dry cloth.
Do not block any ventilation openings. Install the unit in accordance with the
manufacturer’s instructions.
8.
9.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs.
Convenience receptacles and the point where they exit from the unit. Be sure that
the power outlet is located near the unit so that it is easily accessible.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the unit. When a cart is used, use caution
when moving the cart/unit combination to avoid injury from tipping over.
Unplug this unit when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the unit has been damaged in any way, such as: if the power-supply cord
or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is
exposed to rain or moisture, or if the unit does not operate normally or has been
dropped.
11.
12.
13.
14.
ii
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/
EC of the European Parliament and the Council on restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS Directive) and is
deemed to comply with the maximum concentration values issued by the European
Technical Adaptation Committee (TAC) as shown below:
Proposed Maximum Con-
centration
Substance
Actual Concentration
Lead (Pb)
0,1%
< 0,1%
< 0,1%
< 0,01%
< 0,1%
Mercury (Hg)
0,1%
Cadmium (Cd)
0,01%
0,1%
Hexavalent Chromium (Cr6+)
Polybrominated biphenyls
(PBB)
0,1%
0,1%
< 0,1%
< 0,1%
Polybrominated diphenyl ethers
(PBDE)
Certain components of products as stated above are exempted under the Annex of the
RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps
not specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and
electronic ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight
or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
iii
Copyright Information
Copyright © ViewSonic® Corporation, 2011. All rights reserved.
ViewSonic®, the three birds logo, On View®, ViewMatch™, and ViewMeter® are registered
trademarks of ViewSonic® Corporation.
Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic® Corporation reserves the
right to change product specifications without notice. Information in this document may
change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic® Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
For Your Records
Product Name:
VP3D1
ViewSonic 3D Video Processor
VS13964
VP3D1_UG_ENG Rev. 1A 01-27-11
Model Number:
Document Number:
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank
you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn
more.
iv
CONTENTS
Introduction ........................................................................2
Features ......................................................................................................................2
Package Contents .......................................................................................................2
Product Overview ...............................................................3
Front View ...................................................................................................................3
Rear View ...................................................................................................................3
LED Indicators ....................................................................4
Connection .........................................................................4
Connecting Video source devices ...............................................................................5
Using the 3D Video Processor ..........................................6
PlayStation® 3 Games ................................................................................................6
3D Blu-rayTM Player ...................................................................................................6
3D TV (e.g. SKY 3D) ...................................................................................................6
3D Device (e.g. 3D DV/DC) with 2D 1080i side by side signal output ........................6
Operation ....................................................................................................................7
Specifications .....................................................................8
Timing chart ........................................................................8
Supported timing for 3D video input ............................................................................8
Computer Compatibility ...............................................................................................8
Troubleshooting .................................................................9
1
Introduction
Features
Convert 3D video from several popular formats for display on DLP-Link 3D ready
projectors.
TM
Automatically identify 3D input signal from 3D Blu-ray Disc Player and convert
it to 720p 120Hz.
Compatible with HDMI 1.4a 3D formats including side-by-side, etc.
Pass 2D images unaltered for normal display
Manually convert side-by-side 3D signal by pressing SBS Mode button.
Environmental conditions:
Temperature:
Operating: 5°C ~ 35°C (41°F ~ 104°F)
Non-operating: -20°C ~ 60°C (-4°F ~ 140°F)
Altitude:
Operating: Sea level to 16,000 feet
Non-operating: Sea Level to 30,000 feet
Package Contents
3D Video Processor
Power plug and power adapter
HDMI cable
ViewSonic CD Wizard
Quick Start Guide
2
Product Overview
Front View
1
2
3
4
SBS (Side-By-Side) Mode
button
HDMI 1 button
POWER button
3
4
1
HDMI 2 button
2
Rear View
5
6
7
8
DC power input
HDMI in 1 / HDMI in 2
HDMI out (to projector)
7
8
5
Service
6
3
LED Indicators
Power LED is red.
SBS MODE LED is blue when this feature is selected.
HDMI 1LED is blue when this input source is selected and detected.
HDMI 2 LED is blue when this input source is selected and detected.
Power LED
(Red)
SBS MODE
(Blue)
HDMI 1
(Blue)
HDMI 2
(Blue)
Status
Standby state
(Input power cord)
HDMI 1 input source
(Default)
HDMI 2 input source
HDMI 1 input source &
SBS mode enable
Power on & HDMI 2
input source & SBS
mode enable
Off
Off
Off
Off
Steady light
Steady light
Steady light
Off
Off
Steady light
Off
Off
Steady light
Off
Steady light
Steady light
Steady light
Steady light
Off
Steady light
Connection
Connecting the AC adapter
1
2
AC adapter
Power cord
1
2
4
Connecting Video source devices
Sky+HD, Cable / Satellite box
VP3D1 3D Video Processor
3D Capable DLP Projector
PlayStation
3
3D Blu-ray™ Player
3D Glasses
5
Using the 3D Video Processor
Once you have connected your devices together with HDMI cables, as shown in the
diagram, you are ready to begin. Power ON your 3D video source, 3D Video
Processor and your 3D projector.(*)
Note *: The 3D video source device must be powered on before the 3D Video
Processor.
PlayStation® 3 Games
1.
Make sure that you have updated your console to the latest software version in
PlayStation® 3.
2.
Go to the "Settings menu → Display settings → Video output → HDMI".
TM
3D Blu-ray Player
TM
1.
Make sure that your player can support 3D Blu-ray disc and that 3D output is
enabled.
Insert the 3D Blu-ray disc into the player, press "Play".
TM
2.
3D TV (e.g. SKY 3D)
1.
2.
3.
Contact your TV service provider to enable any 3D channels on your channel
package.
Once enabled, switch to the 3D channel. - You should see two images side-by-
side.
Press the "SBS Mode" button on the front of the 3D Video Processor.(*)
Note *: If input video is normal 2D, please press SBS mode to "Off".
3D Device (e.g. 3D DV/DC) with 2D 1080i side by side
signal output
1.
Connect your 3D device and switch to out 3D content with 2D side-by-side output
to 3D Video Processor. You should see two images side-by-side.
Press the "SBS Mode" button on the front of the 3D Video Processor.
When you see "3D" in the top right hand corner of the screen, enable your
projector's 3D mode, turn on your 3D glasses and put them on.
If necessary, use your projector's 3D Sync-Invert option to optimize your 3D
experience. The option is located in the "Display" section of the projector OSD
menu.
2.
3.
4.
Note: If input video is normal 2D, please press SBS mode to "Off". If SBS mode is
active, 2D video content will not display correctly.
6
Operation
TM
1.
2.
3.
4.
Connect your VP3D1 3D Video Processor to a 3D Blu-ray Player using a HDMI
cable.
Connect your VP3D1 3D Video Processor to a 3D Ready DLP® projector using
another HDMI cable.
Turn on your sources (3D Blu-ray Player, VP3D1 3D Video Processor and 3D
TM
Ready DLP® projector).
Press the “PLAY” button on the player.
3D Blu-ray™ Player
5.
6.
Make sure the power of the 3D glasses is on.
Wear the 3D glasses, and then enjoy your 3D experience!
HDMl-lN
HDMl-OUT
3D Ready DLP Projector
(with HDMI connection)
3D Blu-ray™ Player
HDMl-OUT
HDMl-lN
VP3D1 3D Video Processor
7
Specifications
Native 3D output resolution
Maximum output resolution
Inputs
HD Ready 720p120Hz
Full HD 1080P
2x HDMI 1.4a (HDCP) - audio supported
USB type A for firmware update
1x HDMI 1.3 (HDCP) - audio supported
PAL SECAM 576i/p, NTSC 480i/p, HD 720p/1080i/1080p
AC 100-240 V, 50 - 60 Hz, 3.0A
10W (<1W standby)
Outputs
2D video compatibility
Power supply (AC adapter)
Power consumption
Dimension (W x D x H)
Weight
430 x 210 x 36 mm
1.3kg ( 2.9lb)
Note: Design and Specifications are subject to change without prior notice.
Timing chart
Supported timing for 3D video input
Resolution
(H x V )
VerticalFrequency
Signal mode
3D format type
(Hz)
50Hz
50Hz
60Hz
60Hz
60Hz
50Hz
24Hz
24Hz
720p
720p
720p
1280 x 720
1280 x 720
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
Frame packing
Top-and-Bottom
Frame packing
Top-and-Bottom
Side-by-Side (Half)
Side-by-Side (Half)
Frame packing
720p
1080i
1080i
1080p
1080p
Top-and-Bottom
Computer Compatibility
Computer Input Resolutions
640 x 480 @ 60Hz
Computer Output Resolutions
640 x 480 @ 60Hz
800 x 600 @ 60Hz
1024 x 768 @ 60Hz
1280 x 720 @ 60Hz
1280 x 800 @ 60Hz
1280 x 1024 @ 60Hz
1400 x 1050 @ 60Hz
1440 x 900 @ 60Hz
1680 x 1050 @ 60Hz
1600 x 1200 @ 60Hz
1920 x 1080 @ 60Hz
800 x 600 @ 60Hz
1024 x 768 @ 60Hz
1280 x 720 @ 60Hz
1280 x 800 @ 60Hz
1280 x 1024 @ 60Hz
1400 x 1050 @ 60Hz
1440 x 900 @ 60Hz
1680 x 1050 @ 60Hz
1600 x 1200 @ 60Hz
1920 x 1080 @ 60Hz
8
Troubleshooting
No image appears on screen.
1.
Ensure all the cables and power connections are correctly and securely
connected as described in the "Connection" section.
Ensure all the pins of connectors are not bent or broken.
Make sure you have powered on all the devices.
Blurry double image.
2.
3.
1.
Press "SBS Mode" button to "Off" to avoid normal 2D image is blurry double
image.
2.
3.
Two images, side-by-side format.
Press "SBS Mode" button to "On" for input signal is HDMI 1.3 2D 1080i side-by-
side.
Pseudo-3D Image or uncomfortable depth of field inside the image.
1.
Use you projector's "3D Sync. Invert" option.
Image does not display in 3D.
1.
Check if the battery of 3D glasses is drained.
9
Customer Support
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.
T = Telephone
F = FAX
Country/Region
Website
Email
AUS= 1800 880 818
NZ= 0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
Canada
Europe
Hong Kong
India
T= 852 3102 2900
T= 1800 11 9999
support/call-desk/
Ireland (Eire)
Korea
T= 080 333 2131
T= 0800-4441185
T= 1230-020-7975
T= 01800-9-157235
T= 001-8882328722
Latin America
(Argentina)
Latin America (Chile)
Latin America
(Columbia)
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16
Latin America (Peru)
Macau
ap.viewsonic.com/me/
T= 0800-54565
T= 853 2870 0303
Contact your reseller
Middle East
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
Puerto Rico & Virgin
Islands
Singapore/Malaysia/
Thailand
ap.viewsonic.com/za/
T= 65 6461 6044
South Africa
Contact your reseller
support/call-desk/
United Kingdom
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
United States
10
Limited Warranty
VIEWSONIC® 3D Video Processor
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship,
under normal use, during the warranty period. If a product proves to be defective in
material or workmanship during the warranty period, ViewSonic will, at its sole option,
repair or replace the product with a like product. Replacement product or parts may include
remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic 3D Video Processor are warranted for 1 year for all parts excluding the light
source and 1 year for labor from the date of the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a.Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
b. Any damage of the product due to shipment.
c. Removal or installation of the product.
d. Causes external to the product, such as electrical power fluctuations or failure.
e. Use of supplies or parts not meeting ViewSonic’s specifications.
f. Normal wear and tear.
g. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results
when a static image is displayed on the product for an extended period of time.
4. Removal, installation, one way transportation, insurance, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer
Support (Please refer to Customer Support page). You will need to provide your
product’s serial number.
2. To obtain warranty service, you will be required to provide (a) the original dated sales
slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial
number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized
ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact
ViewSonic.
11
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description
contained herein including the implied warranty of merchantability and fitness for a
particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic
shall not be liable for:
1.
Damage to other property caused by any defects in the product, damages based
upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of
business opportunity, loss of goodwill, interference with business relationships, or
other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on implied warranties and/or do not
allow the exclusion of incidental or consequential damages, so the above limitations and
exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and
Canada, contact ViewSonic or your local ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.
For users in Europe and Russia, full details of warranty provided can be found in www.
viewsoniceurope.com under Support/Warranty Information.
4.3: ViewSonic 3D Video Processor
3DVP_LW01 Rev. 1a 02-11-09
12
|