INSTALLATION GUIDE
SUBJECT: Rockhopper Adjustable Dropout Installation
FROM: Engineering Department
DATE: 06/2ꢀ/07
To ensure correct installation of the adjustable dropouts, please read and familiarize yourself
with the following steps:
Please read the following instructions. If you have any doubt regarding your mechanical ability and/or installation of
this product, visit your local authorized dealer. Specialized recommends that the dropouts be installed using a torque
wrench, by a qualified mechanic.
1
2
Rockhopper
Left Dropout
9898-4240
Rockhopper
Right Dropout
9898-4245
Rockhopper models are equipped with a right dropout with
an integrated derailleur hanger and a left dropout.
Install the left and right dropouts. Do not tighten the dropout
bolts yet, leave them 1/4 turn loose.
Centrum models are equipped with a right dropout without an
integrated derailleur hanger and a left dropout.
NOTE: Make sure the bolt threads and washers are greased.
After-Market dropouts are offered with the built-in derailleur hanger
only and can be used with gears or as a single-speed dropout.
3
4
Install the rear wheel in the loose dropouts. Tightening the
quick-release will self-align the wheel and dropouts.
Install the disc brake.
ꢀ
|