Quick Start Guide
Preparation
Shooting
Playback
1
2
Set the mode dial to AUTO.
The battery pack
The lens
The memory card
Date/time setup
Press
Check that the LIVE VIEW/OVF switch is
set to “LIVE VIEW.”
1
Charge the battery pack until the
CHARGE lamp lights off.
1
Remove the caps.
1
Turn the camera on.
LIVE VIEW/OVF switch
To play back a previous or next image: press /
on the controller.
Check the subject on the LCD
monitor.
CHARGE lamp
Hold the grip of the
camera.
Do not touch inside parts.
If dust enters the camera, it may
appear on the photo image. Do not
leave the camera and lens without
the caps. When you change the lens,
do it quickly in a location free from
dust.
To return to the shooting mode:
2
Insert the battery pack into the camera.
2
Set up the date/time.
To delete the image
Press
Support the lens from
below.
Face side with
a label
2
Attach the lens.
Align the marks.
When inserting a memory card, turn the
camera off.
For available memory cards, refer to the
Instruction Manual.
3
Press the shutter button
halfway down to focus.
Pressing the shutter button halfway
down and holding it activates the
autofocus.
Firmly insert the battery pack all the
way while pressing the lock lever with
the tip of the battery.
To fully enjoy the features of your single lens reflex
camera, consult the “Instruction Manual.”
down to shoot.
Turn the lens until it clicks.
|