4-163-319-11(1)
Digital HD Video Camera Recorder
Operating Guide
HDR-AX2000
Spanish Quick Guide/
118
Guía rápida en español
© 2009 Sony Corporation
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
INSTRUCTIONS.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-
over.
• Unplug this apparatus during lightning storms or when unused for long
periods of time.
Continued ,
3
IMPORTANT SAFETY INSTRUCTIONS (Continued)
• Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
• If the shape of the plug does not fit the power outlet, use an attachment
plug adaptor of the proper configuration for the power outlet.
4
Read this first
Before operating this unit, please read this
manual thoroughly, and retain it for future
reference.
AC Adaptor
• Use the nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall outlet (wall socket) immediately if any
malfunction occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall outlet (wall socket) via the
AC Adaptor.
To handle the recorded images on
your computer
Refer to “Help” on the supplied CD-ROM
“Content Management Utility.”
CAUTION
Replace the battery with the
specified type only. Otherwise, fire
or injury may result.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
For customers in the U.S.A. and
CANADA
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are
recyclable. You can help preserve
our environment by returning
your used rechargeable batteries
to the collection and recycling
location nearest you.
Do not expose the batteries to excessive heat such
as sunshine, fire or the like.
Battery pack
If the battery pack is mishandled, the battery pack
can burst, cause a fire or even chemical burns.
Observe the following cautions.
For more information regarding recycling of
rechargeable batteries, call toll free 1-800-822-
8837, or visit http://www.rbrc.org/
• Do not disassemble.
Caution: Do not handle damaged or leaking
Lithium-Ion batteries.
• Do not crush and do not expose the battery pack
to any shock or force such as hammering,
dropping or stepping on it.
• Do not short circuit and do not allow metal
objects to come into contact with the battery
terminals.
• Do not expose to high temperature above 60°C
(140°F) such as in direct sunlight or in a car
parked in the sun.
• Do not incinerate or dispose of in fire.
• Do not handle damaged or leaking lithium ion
batteries.
• Be sure to charge the battery pack using a
genuine Sony battery charger or a device that
can charge the battery pack.
• Keep the battery pack out of the reach of small
children.
• Keep the battery pack dry.
• Replace only with the same or equivalent type
recommended by Sony.
• Dispose of used battery packs promptly as
described in the instructions.
Continued ,
5
Read this first (Continued)
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
For customers in the U.S.A.
UL is an internationally recognized safety
organization.
The UL Mark on the product means it has
been UL Listed.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
If you have any questions about this
product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669).
The number below is for the FCC related
matters only.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
The supplied interface cable must be used with the
equipment in order to comply with the limits for a
digital device pursuant to Subpart B of Part 15 of
FCC Rules.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: HDR-AX2000
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone Number: 858-942-2230
For the State of California, USA only
Perchlorate Material - special handling may
apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate.
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Note
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
6
Representative plug of power supply cord of countries/regions around the world.
A Type
(American
Type)
B Type
BF Type
B3 Type
C Type (CEE SE Type (CEE O Type (Ocean
Type) Type) Type)
(British Type) (British Type) (British Type)
The representative supply voltage and plug type are described in this chart.
Depend on an area, Different type of plug and supply voltage are used.
Attention: Power cord meeting demands from each country shall be used.
- For only the United States
Use a UL Listed, 1.5-3 m (5-10 ft.), Type SPT-2 or NISPT-2, AWG no. 18 power supply cord, rated for
125 V 7 A, with a NEMA 1-15P plug rated for 125 V 15 A.”
Europe
Countries/regions
Voltage
Frequency (Hz)
Plug type
Austria
Belgium
Czech
Denmark
Finland
France
Germany
Greece
Hungary
Iceland
Ireland
230
230
220
230
230
230
230
220
220
230
230
220
230
230
230
220
230
220
220
220
127/230
230
230
240
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
C
C
C
C
C
C
C
C
C
C
C/BF
C
C
C
C
C
C
C
Italy
Luxemburg
Netherlands
Norway
Poland
Portugal
Romania
Russia
Slovak
Spain
Sweden
Switzerland
UK
C
C
C
C
C
BF
Asia
Countries/regions
Voltage
Frequency (Hz)
Plug type
China
Hong Kong
India
Indonesia
Japan
Korea (rep)
Malaysia
Philippines
Singapore
Taiwan
220
200/220
230/240
127/230
100
220
240
220/230
230
110
50
50
50
50
50/60
60
50
60
50
60
A
BF
C
C
A
C
BF
A/C
BF
A
Thailand
Vietnam
220
220
50
50
C/BF
A/C
Continued ,
7
Read this first (Continued)
Oceania
Countries/regions
Voltage
Frequency (Hz)
Plug type
Australia
New Zealand
240
230/240
50
50
O
O
North America
Countries/regions
Voltage
Frequency (Hz)
Plug type
Canada
USA
120
120
60
60
A
A
Central America
Countries/regions
Voltage
Frequency (Hz)
Plug type
Bahamas
Costa Rica
Cuba
Dominican (rep)
El Salvador
Guatemala
Honduras
Jamaica
120/240
110
110/220
110
110
120
110
110
120/127
120/240
110/220
60
60
60
60
60
60
60
50
60
60
60
A
A
A/C
A
A
A
A
A
A
A
Mexico
Nicaragua
Panama
A
South America
Countries/regions
Voltage
Frequency (Hz)
Plug type
Argentina
Brazil
Chile
Colombia
Peru
Venezuela
220
127/220
220
120
220
50
60
50
60
60
60
C/BF/O
A/C
C
A
A/C
A
120
Middle East
Countries/regions
Voltage
Frequency (Hz)
Plug type
Iran
Iraq
Israel
Saudi Arabia
Turkey
UAE
220
220
230
127/220
220
240
50
50
50
50
50
50
C/BF
C/BF
C
A/C/BF
C
C/BF
Africa
Countries/regions
Voltage
Frequency (Hz)
Plug type
Algeria
Congo (dem)
Egypt
Ethiopia
Kenya
Nigeria
South Africa
Tanzania
Tunisia
127/220
220
220
220
240
230
220/230
230
50
50
50
50
50
50
50
50
50
C
C
C
C
C/BF
C/BF
C/BF
C/BF
C
220
8
b Notes
Notes on use
• “Memory Stick PRO Duo” media can be used
only with “Memory Stick PRO” media
compatible equipment.
• Do not attach a label or the like on “Memory
Stick PRO Duo” media or a “Memory Stick
Duo” media adaptor.
• When using a “Memory Stick PRO Duo” media
with “Memory Stick” media compatible
equipment, insert the “Memory Stick PRO Duo”
media into the “Memory Stick Duo” media
adaptor.
Types of memory cards you can use in
your camcorder
You can use “Memory Stick PRO Duo”
media, “Memory Stick PRO-HG Duo”
media, SD memory cards, and SDHC
memory cards in your camcorder. You
cannot use a MultiMedia Card.
• “Memory Stick PRO Duo” media and
“Memory Stick PRO-HG Duo” media are
both called “Memory Stick PRO Duo”
media in this manual.
memory cards.
Using the camcorder
• Do not hold the camcorder by the
following part.
• Up to 32 GB of memory cards are
confirmed to be used with your
camcorder.
Types of “Memory Stick PRO Duo”
media you can use in your camcorder
LCD panel
Lens hood
• It is recommended to use “Memory Stick
PRO Duo” media of 1 GB or larger
marked with:
–
(“Memory Stick
PRO Duo” media)*
–
(“Memory Stick
PRO-HG Duo” media)
* Marked with Mark2 or not, either can be used.
Internal
microphone
Microphone (sold
separately) or
Microphone holder
“Memory Stick PRO Duo” media/“Memory
Stick PRO-HG Duo” media
(This size can be used with your
camcorder.)
Viewfinder
b Notes
“Memory Stick” media
(You cannot use it in your camcorder.)
• The camcorder is not dustproof, dripproof or
waterproof. See “About handling of your
• Connect cables to your camcorder with their
terminals placed the correct way. Squeezing the
terminals into your camcorder's jacks may
damage them or results in a malfunction of your
camcorder.
Continued ,
9
Read this first (Continued)
pack is beyond the safely operable range.
In this case, a message appears on the
About menu items, LCD panel,
viewfinder, and lens
• A menu item that is grayed out is not
available under the current recording or
playback conditions.
On recording
• In order to stabilize memory card
operation, it is recommended that you
format the memory card when you use it
with your camcorder for the first time. All
data recorded on the memory card will be
erased by formatting, and can not be
recovered. Save important data on the
memory card on other media such as a
computer, before formatting the memory
card.
• The LCD screen and the viewfinder are
manufactured using extremely high-
precision technology, so over 99.99% of
the pixels are operational for effective
use. However, there may be some tiny
black points and/or bright points (white,
red, blue, or green in color) that appear
constantly on the LCD screen and/or the
viewfinder. These points are normal
results of the manufacturing process and
do not affect the recording in any way.
• Before starting to record, test the
recording function to make sure the
picture and sound are recorded without
any problems.
• Compensation for the loss of the content
of recordings or the loss of recording
opportunities cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder, storage
media, etc., or even if images or sounds
are distorted due to the limits of the
capabilities of the camcorder.
Black point
White, red, blue or green point
• TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need an NTSC
system-based TV.
• Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
Do not expose your camcorder’s
viewfinder, lens, or LCD screen to the
sun or strong light source for extended
periods.
• Intense light sources, especially the sun
will converge on the viewfinder or lens
and damage the internal parts of your
camcorder. Avoid sunlight or other strong
light sources when storing your
• Because of the way that the image device
(CMOS sensor) reads out image signals,
the following phenomena may occur.
– The subjects passing by the frame rapidly
might appear crooked depending on the
recording conditions. (This phenomenon may
be notable in displays having high motion
resolution.)
– Horizontal lines appear on the screen during
recording under fluorescent lights. The
phenomena can be reduced by adjusting the
camcorder. Protect this device by always
closing the lens cover or by placing it in
its bag when not in use.
About temperature of your camcorder
and battery pack
• Your camcorder has a protective function
that disables recording or playback if the
temperature of your camcorder or battery
10
– Images on the screen look horizontally
divided when a subject is lighted with a flash.
The phenomena can be reduced by using a
slower shutter speed.
fragmented. As a result, you may not be
able to record and save images properly.
If this happens, save images on a separate
recordable media, such as a disc or
computer, then format the memory card
(p. 62).
On playing back movies
• Your camcorder is compatible with
MPEG-4 AVC/H.264 High Profile for
high definition image quality (HD)
recording. Therefore, you cannot play
back images recorded with high definition
image quality (HD) on your camcorder
with the following devices;
– Other AVCHD format compatible devices
which are not compatible with High Profile
– Devices which are not compatible with the
AVCHD format
Note on disposal/transfer
• Even if you delete all data or format the
memory card on your camcorder or
computer, you may not delete data from
the memory card completely. When you
transfer the memory card or your
camcorder, it is recommended that you
delete the data completely using
commercially available data deletion
software to prevent the recovery of your
data. Also, when you dispose of the
memory card, it is recommended that you
destroy the actual body of the memory
card.
• Movies made using this camcorder may
not play back normally on devices other
than this camcorder. Also, movies
recorded on other devices may not play
back properly on this camcorder.
About the operation of the camcorder
Discs recorded with high definition
image quality (HD)
• You can operate the camcorder using the
SEL/PUSH EXEC dial/B/b buttons
and the touch panel. However, you cannot
use the touch panel to make some settings
such as the MENU items.
• This camcorder captures high definition
footage in the AVCHD format. DVD
media containing AVCHD footage should
not be used with DVD based players or
recorders, as the DVD player/recorder
may fail to eject the media and may erase
its contents without warning.
About this manual
• The images of the LCD screen and the
viewfinder used in this manual for
illustration purposes are captured using a
digital still camera, and therefore may
appear different.
• The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
Save all your recorded image data
• To prevent your image data from being
lost, save all your recorded images on
external media periodically. It is
recommended that you save the image
data on a computer using the supplied
application software.
Format the recording media using
[MEDIA FORMAT] if images are not
recorded or played back properly
• Design and specifications of recording
media and other accessories are subject to
change without notice.
• If you continue recording and deleting
images on a memory card for a long time,
the files on that memory card may be
11
Table of Contents
Read this first ........................................................................................... 5
Recording/Playback
Playback ................................................................................................ 45
Viewing still images............................................................................. 47
12
Using the Menu
Continued ,
13
Table of Contents (Continued)
Troubleshooting
Troubleshooting ..................................................................................... 83
Additional Information
Specifications ....................................................................................... 105
Quick Reference
Screen indicators ................................................................................. 114
Index .................................................................................................... 115
Spanish Quick Guide/Guía rápida en español
118
14
GSetttiengpSta1rte:d Checking supplied items
Make sure that you have following items
supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
99 for types of memory cards that you can use
on your camcorder.
AC Adaptor (AC-L100C) (1) (p. 17)
Rechargeable battery pack (NP-F570) (1)
Lens hood with lens cover (1) (p. 16)
This lens hood is pre-mounted.
Power cord (mains lead) (1) (p. 17)
Wireless Remote Commander (RMT-845)
CD-ROM “Content Management Utility” (1)
Operating Guide (1)
A button-type lithium battery is already installed.
Component video cable (1) (p. 51)
A/V connecting cable (1) (p. 51)
USB cable (1) (p. 81)
15
Step 2: Attaching the lens hood with lens cover
PUSH (lens hood release) button
Align the marks on the lens hood to
those on the camcorder, and turn the
lens hood in the direction of the
arrow 2 until it is locked.
To remove the lens hood with lens
cover
Turn the lens hood in the opposite direction
to the arrow 2 in the illustration while
pressing the PUSH (lens hood release)
button.
z Tips
• If you attach or remove a 72mm (2 7/8 in.) PL
filter or MC protector, remove the lens hood
with lens cover.
To open or close the shutter of the
lens hood with lens cover
Move the lens cover lever to OPEN to open
the lens cover, and move the lever to
CLOSE to close the lens cover.
16
Step 3: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (L series) with the
supplied AC Adaptor.
1
Press the battery pack against the
back of your camcorder and slide
it down.
b Notes
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (L series)
2
With the B mark on the DC plug
facing outwards, connect the DC
plug to the DC IN jack on your
camcorder.
DC plug
DC IN jack
Power cord
(mains lead)
AC Adaptor
To the wall outlet
(wall socket)
B mark
3
4
Connect the power cord (mains
lead) to the AC Adaptor.
Connect the power cord (mains
lead) to the wall outlet (wall
socket).
Continued ,
17
Step 3: Charging the battery pack (Continued)
To remove the battery pack
Slide the POWER switch to OFF (CHG).
Push the BATT RELEASE (battery release)
button and remove the battery pack.
5
Set the POWER switch to OFF
(CHG).
The CHG lamp lights up and charging
starts.
BATT RELEASE
(battery release) button
To store the battery pack
If the battery pack is not in use for a while,
run down the battery and store it. See page
101 for details on storage of the battery
pack.
After charging the battery
The CHG lamp turns off when the battery is
fully charged. Disconnect the AC Adaptor
from the DC IN jack.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
z Tips
Battery pack
NP-F570 (supplied)
NP-F770
Charging time
• You can check the remaining battery life with
260
370
485
NP-F970
b Notes
• You cannot use the NP-F330 battery pack with
your camcorder.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF (CHG).
• The CHG lamp flashes during charging, or the
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out.
18
Step 4: Turning the
power on and holding
your camcorder
properly
– The battery pack is too cold.
Remove the battery pack and put it in a warm
place.
– The battery pack is too hot.
Remove the battery pack and put it in a cool
place.
To record or play back, set the POWER
switch to ON.
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord (mains lead) is disconnected from
the wall outlet (wall socket).
When you use your camcorder for the first
time, the [CLOCK SET] screen appears
On the charging time
• Time measured with the camcorder at 25 °C
(77 °F). 10 °C to 30 °C (50 °F to 86 °F) is
recommended.
Using an outside power source
You can use the AC Adaptor to obtain the
AC power. While you are using the AC
Adaptor, the battery pack will not lose its
charge even when it is attached to your
camcorder.
POWER switch
1
Slide the POWER switch to ON
while pressing the green button.
Connect your camcorder as shown
Press and hold the
green button.
On the AC Adaptor
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
b Notes
• The current date and time appear on the LCD
screen for a few seconds when you turn on your
camcorder after you set the date and time with
Continued ,
19
(Continued)
Step 5: Adjusting the
LCD panel and
viewfinder
2
Hold the camcorder properly.
LCD panel
Open the LCD panel 180 degrees (1), then
rotate it to the best angle to record or play
back (2).
1Open 180 degrees.
290 degrees
(max.)
2180 degrees
(max.)
3
Ensure a good grip, then fasten
the grip belt.
DISPLAY button
z Tips
• Images are displayed as mirror images on the
LCD screen, but are recorded as normal images.
To turn off the LCD backlight to make
the battery last longer
To turn off the power
Slide the POWER switch to OFF (CHG).
Press and hold the DISPLAY button for a
few seconds until
appears.
This setting is practical when you use your
camcorder in bright conditions or when you
want to save battery power. The recorded
picture will not be affected by the setting.
To turn on the LCD backlight, press and
hold the DISPLAY button for a few
b Notes
• If warning messages appear on the screen,
seconds until
disappears.
Also, you can turn on the LCD backlight by
turning on/off the camcorder.
z Tips
• You can adjust the brightness of the LCD screen
20
b Notes
• Do not remove the pre-attached eyecup.
Viewfinder
You can view picture using the viewfinder
to save the battery, or when the picture on
the LCD screen is not clear.
Large eyecup
(supplied)
Attach with the
protruding part
at the top.
Viewfinder lens
adjustment lever
Move it until the picture
becomes clear.
b Notes
• You may see primary colors shimmering in the
viewfinder when you move your line of sight.
This is not a malfunction. The shimmering
colors will not be recorded on the memory card.
z Tips
• You can adjust the brightness of the viewfinder
• To display images both on the LCD display and
in the viewfinder, set [VF POWERMODE] to
When the picture in the viewfinder is
hard to see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied large
eyecup. To attach the large eyecup, stretch
it slightly and align it with the eyecup
groove in the viewfinder. You can attach
the large eyecup facing either the right or
left side.
21
Step 6: Setting the date and time
Set the date and time when using your
camcorder for the first time. If you do not
set the date and time, [CLOCK SET] screen
appears every time you turn on your
camcorder.
2
3
4
5
Select
(OTHERS) by turning
the SEL/PUSH EXEC dial, then
press the dial.
z Tips
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
Select [CLOCK SET] by turning
the SEL/PUSH EXEC dial, then
press the dial.
Select your area by turning the
SEL/PUSH EXEC dial, then press
the dial.
MENU
button
SEL/PUSH
EXEC dial
Skip to step 4 when you set the clock for
the first time.
1
Press the MENU button.
Set [DST SET]/[SUMMERTIME],
[Y] (year), [M] (month), [D] (day),
hour and minute, by turning the
SEL/PUSH EXEC dial, then press
the dial.
22
Step 7: Inserting a
memory card
1
Open the cover in the direction of
the arrow.
The clock starts.
• Set [DST SET]/[SUMMERTIME] to [ON]
to move the time forward 1 hour.
• You can set any year up to the year 2037.
• For midnight, set it to 12:00 AM. For
midday, set it to 12:00 PM.
z Tips
2
Orient the memory card’s
• The date and time are automatically recorded on
the selected memory card, and can be displayed
notched corner as shown in the
illustration, and insert into the
memory card slot until it clicks.
Changing the language setting
Memory card slot A and
its access lamp
You can change the on-screen displays to
show messages in a specified language.
Press the MENU button and select
(OTHERS) with the SEL/PUSH EXEC
dial. Select the screen language in
Memory card slot B and
its access lamp
Insert with the notched corner
first, and facing down.
b Notes
• If you insert a memory card into the slot in
the wrong direction, the memory card, the
memory card slot, or image data may be
damaged.
• When you insert a new memory card in
standby mode, the [Create a new Image
Continued ,
23
Step 7: Inserting a memory card (Continued)
Database File.] screen appears. Follow the
screen indication, and touch [YES].
b Notes
• You can only select a slot that already has a
memory card inserted.
• While movies are being recorded on the
memory card, you cannot switch the slot even if
you press the memory card slot A/B buttons.
To eject the memory card
Lightly push the memory card once.
z Tips
• When only one slot has a memory card inserted,
the slot that has the memory card is selected
automatically.
• If the memory card is fully recorded during
recording, the camcorder continues recording
automatically on the memory card inserted in
b Notes
• When the access lamp is lit or flashing in red,
your camcorder is reading/writing data. Do not
shake or knock your camcorder, turn the power
off, eject the memory card, or remove the
battery pack. Otherwise, image data may be
damaged.
• If [Failed to create a new Image Database File.
It may be possible that there is not enough free
space.] appears in step 2, format the memory
• When inserting or ejecting the memory card, be
careful to prevent the memory card from
popping out and dropping.
Selecting the memory card slot to be
used for recording
Press the A or B button of the memory card
slot where the memory card you want to
record on is inserted. The lamp of the
selected slot lights up in green.
Memory card slot A button
Memory card slot B button
24
Recording/Playback
Recording
Recording lamp
Handle record button
Recording lamp
Lens hood
POWER switch
Record button
Your camcorder records movies on memory cards. Do the following steps to record movies.
• This camcorder can record movies in either high definition image quality (HD) or standard definition
image quality (SD). The factory setting is high definition image quality (HD) ([REC FORMAT], p. 27).
b Notes
• When the access lamp is lit or flashing in red, your camcorder is writing data on the memory card. Do not
shake or knock your camcorder, or remove the battery pack or the AC Adaptor.
• Your camcorder can record movies for about 13 hours continuously.
• If a movie file exceeds 2 GB during recording, the camcorder divides the file and create a new file
automatically.
• The menu settings, the PICTURE PROFILE settings, and the settings made by the AUTO/MANUAL
switch are stored in your camcorder when you turn the POWER switch to OFF. The access lamp lights up
while the settings are being stored. If you remove the battery pack or the AC Adaptor before turning off
the power, the settings may return to the default settings.
1
Open the shutter of the lens hood.
Continued ,
25
Recording (Continued)
2
3
Slide the POWER switch to ON while pressing the green button.
Press and hold the green
button.
Press the record button or the handle record button.
[STBY] t [REC]
The recording lamp lights up during recording.
To stop the movie recording, press the record button or the handle record button again.
z Tips
• When recording in high definition image quality (HD), the aspect ratio is fixed to 16:9. When recording in
standard definition image quality (SD), you can switch the aspect ratio to 4:3 ([
• Indicators displayed on the screen during recording are shown on page 114.
• For low angle recording, the handle record button is convenient. Release the HOLD lever to enable the
handle record button. It might be helpful if you set the LCD panel face up or close it after turning it face
down, or lift the viewfinder up during the low angle recording.
• You can capture still images from the movies you recorded (p. 59).
To continue recording on memory cards, one after another (Relay recording)
Insert memory cards each in both slots A and B, so the camcorder switches memory card A (or
B) just before space on the other one runs out, and continues recording on the next memory
card automatically.
26
Insert a recordable memory card.
Small space
End
Start
REC: Recording
Small space
b Notes
• Do not eject the memory card that is currently being used for recording. Replace only the memory card
whose slot lamp is off.
• Even if you press the memory card slot button, A or B, while recording movies, you cannot switch the slot
currently being used.
• When the remaining recording time of the memory card being used is less than 1 minute and the other slot
has a recordable memory card inserted, [
] or [
] appears on the camcorder screen.
The indicator turns off when the memory card is switched.
• If you start recording on a memory card with the remaining recording time of less than 1 minute, the
camcorder may not be able to relay-record. To relay-record without fail, make sure that the memory card
has more than 1 minute when you start recording.
• Seamless playback of relay-recorded movies with this camcorder is not possible.
• You can re-combine relay-recorded movies using the supplied application software (Windows only).
Selecting the recording format
You can select the recording format (bit-rate, image quality, image size, frame rate, scanning
system). In the default setting, [
] is selected.
To change the setting
Press MENU t select
EXEC dial.
(REC/OUT SET) t [REC FORMAT] with the SEL/PUSH
Continued ,
27
Recording (Continued)
Setting value
Description
• Bit-rate
FX: max. 24 Mbps
FH: approx. 17 Mbps (average)
HQ: approx. 9 Mbps (average)
LP: approx. 5 Mbps (average)
• Image quality
HD: High definition image quality
SD: Standard definition image quality
• Image size
FX: 1920×1080
FH: 1920×1080
HQ: HD recording 1440×1080
SD recording 720×480
LP: 1440×1080
• Frame rate
either 24, 30, or 60
• Scanning system
i: interlace
p: progressive
pSCAN: Records images of progressive scanning system as interlace
signal (60i).
Setting value
If you select [
], for example, movies are recorded with following format.
• HD: High definition image quality. SD is standard definition image quality.
• 1080: Effective scanning lines
• 60: Frame rate
• i: Scanning system
• FX: Recording mode
b Notes
• The recording mode is fixed to FX or FH with the progressive scanning system.
28
Changing the settings of your camcorder
recordings
Using the handle zoom
Adjusting the zoom
1 Set the handle zoom switch B to VAR
or FIX.
z Tips
• When you set the handle zoom switch B to
VAR, you can zoom in or out at variable
speed.
• When you set the handle zoom switch B to
FIX, you can zoom in or out at fixed speed
2 Press the handle zoom lever A to zoom
in or out.
b Notes
.
• You cannot use the handle zoom lever A when
the handle zoom switch B is set to OFF.
Using the power zoom lever
Move the power zoom lever D slightly for
a slower zoom. Move it further for a faster
zoom.
• You cannot change the zoom speed of the power
zoom lever D with the handle zoom switch B.
Using the zoom ring
Wide view: (Wide angle)
You can zoom at the desired speed by
turning the zoom ring C. Fine adjustment
is also possible.
b Notes
• Turn the zoom ring C at a moderate speed. If
you turn it too fast, the zoom speed may lag
behind the zoom ring rotation speed, or the
operation sound of the zoom may also be
recorded.
Close view: (Telephoto)
z Tips
• The minimum distance required between your
camcorder and the subject for focus is about
1 cm (about 13/32 in.) for wide angle and about
80 cm (about 2 5/8 feet) for telephoto.
• The focus may not be adjusted at certain zoom
positions if the subject is within 80 cm (about
2 5/8 feet) from your camcorder.
• Be sure to keep your finger on the power zoom
lever D. If you move your finger off the power
zoom lever D, the operation sound of the
power zoom lever D may also be recorded.
Continued ,
29
9 changes to
cannot be adjusted any farther. 9
when the focus
Adjusting the focus manually
changes to
when the focus cannot be
adjusted any closer.
z Tips
For focusing manually
• It is easier to focus on the subject when you use
the zoom function. Move the power zoom lever
towards T (telephoto) to adjust the focus, and
then, towards W (wide angle) to adjust the zoom
for recording.
• When you want to record a close-up image of a
subject, move the power zoom lever towards W
(wide angle) to fully magnify the image, then
adjust the focus.
To restore automatic adjustment
Set the FOCUS switch B to AUTO.
9 disappears and the automatic focus
adjustment is restored.
You can adjust the focus manually for
different recording conditions.
Use this function in the following cases.
– To record a subject behind a window covered
with raindrops.
Using automatic focus temporarily
(Push auto focus)
Record the subject while pressing and
holding the PUSH AUTO button C.
If you release the button, the setting returns
to manual focusing.
Use this function to shift the focus on one
subject to another. The scenes will shift
smoothly.
– To record horizontal stripes.
– To record a subject with little contrast between
the subject and its background.
– When you want to focus on a subject in the
background.
z Tips
• The focal distance information (for when it is
dark and hard to adjust the focus) appears for
about 3 seconds in the following cases. (It will
not be displayed correctly if you are using a
conversion lens (sold separately)).
– To record a stationary subject using a tripod.
– When you set the FOCUS switch B to
MAN and 9 appears on the screen
– When you rotate the focus ring while 9 is
displayed on the screen.
1
2
During recording or standby, set
the FOCUS switch B to MAN.
9 appears.
Rotate the focus ring A and
adjust the focus.
30
Using the expanded focus (Expanded
focus)
Adjusting the image brightness
[EXPANDED FOCUS] is assigned to the
Press the ASSIGN 7 button.
[EXPANDED FOCUS] appears and the
center of the screen is magnified by about
2.0 times. It will be easier to confirm the
focus setting during manual focusing. The
screen returns to the original size when you
press the button again.
b Notes
• Even though the image appears expanded on the
screen, the recorded image is not expanded.
z Tips
• You can select a type of an expanded image
displayed during the expanded focus
You can adjust the image brightness by
adjusting the iris, gain or shutter speed, or
by reducing the light volume with the ND
filter B.
Focusing on a distant subject (Focus
infinity)
Slide the FOCUS switch B to INFINITY
and hold it there.
b Notes
appears on the screen.
• You cannot use the back light function and the
spotlight function when iris, gain and shutter
speed are adjusted manually.
• [AE SHIFT] is not effective temporarily while
you adjust the iris, gain and shutter speed all
manually.
To return to manual focus mode, release the
FOCUS switch B. This function enables
you to set focus on a distant subject even
when the focus is automatically set on a
close subject.
b Notes
Adjusting the iris
You can manually adjust the iris to control
the volume of the light entering the lens. By
adjusting the iris, you can change or close
• This function is only available during the
manual focus. It is not available during the
automatic focus.
(
) the aperture of the lens, which is
expressed as an F value between F1.6 and
F11. The volume of the light increases the
more that you open the aperture (decreasing
F value). The volume of the light decreases
the more that you close the aperture
(increasing F value). The current F value
appears on the screen.
1 During recording or standby, set the
AUTO/MANUAL switch H to
MANUAL.
Continued ,
31
2 When the iris is automatically adjusted,
press the IRIS button E.
next to the gain value disappears, or
the gain value appears on the screen.
next to the iris value disappears, or
the iris value appears on the screen.
3 Set the gain switch F to H, M or L.
The gain value set for the selected gain
switch position appears on the screen.
You can set the gain value for each gain
switch position from [GAIN SET] of the
3 Adjust the iris with the iris ring A.
When you assign [PUSH AUTO IRIS]
to one of the ASSIGN buttons, you can
automatically adjust the iris while
pressing and holding that ASSIGN
ASSIGN button.
To adjust the gain automatically
Press the GAIN button C, or set the
AUTO/MANUAL switch H to AUTO.
z Tips
The gain value disappears, or
next to the gain value.
appears
• The F value becomes close to F3.4 as the zoom
position changes from W to T even when you
open the aperture by setting the F value lower
than F3.4, such as F1.6.
• The range of focus, an important effect of the
aperture, is called the depth of field. The depth
of field gets shallower as the aperture is opened,
and deeper as the aperture is closed. Use the
aperture creatively to obtain the desired effect in
your photography.
b Notes
• When you set AUTO/MANUAL switch H to
AUTO, other manually adjusted items (iris,
shutter speed, white balance) also become
automatic.
z Tips
• When you record high definition image quality
(HD) movies with the gain set to [-6dB] and
play them back with the data code, the gain
value is displayed as [---].
• This is handy for making the background
blurred or sharp.
To adjust the iris automatically
Press the IRIS button E, or set the AUTO/
MANUAL switch H to AUTO.
Adjusting the shutter speed
You can manually adjust and fix the shutter
speed. You can make a moving subject look
still or emphasize the movement of a
moving subject by adjusting the shutter
speed.
The iris value disappears, or
next to the iris value.
appears
b Notes
• When you set the AUTO/MANUAL switch H
to AUTO, other manually adjusted items (gain,
shutter speed, white balance) also become
automatic.
1 During recording or standby, set the
AUTO/MANUAL switch H to
MANUAL.
2 Press the SHUTTER SPEED button D
until the shutter speed value is
highlighted.
Adjusting the gain
You can adjust the gain manually when you
do not want to use the AGC (automatic gain
control).
3 Change the shutter speed displayed on
the screen by turning the SEL/PUSH
EXEC dial G.
1 During recording or standby, set the
AUTO/MANUAL switch H to
MANUAL.
You can adjust the shutter speed in a
range of 1/4 second through 1/10000
second.
2 When the gain is automatically
adjusted, press the GAIN button C.
The denominator of the set shutter speed
appears on the screen. For example,
32
[100] appears on the screen when you
set the shutter speed to 1/100 second.
The larger the value on the screen, the
faster the shutter speed.
flashes during the iris automatic
adjustment, set the ND filter to 3.
The ND filter indicator will stop flashing
and remain on the screen.
If
flashes, set the ND filter to OFF.
4 Press the SEL/PUSH EXEC dial G to
lock the shutter speed.
The ND filter icon will disappear from the
screen.
To readjust the shutter speed, do steps
2 to 4.
b Notes
• If you change the ND filters B during
recording, the movie and sound may be
distorted.
• When adjusting the iris manually, the ND filter
icon does not flash even if the light volume
should be adjusted with the ND filter.
z Tips
• You can set a shutter speed between 1/3 second
and 1/10000 second with the frame rate of 24p
or 24p SCAN.
• It is difficult to focus automatically at a lower
shutter speed. Manual focusing with your
• If the camcorder cannot detect the ND filter
camcorder attached to a tripod is recommended.
position (OFF/1/2/3),
flashes on the screen.
• When recording under fluorescent lamps,
sodium lamps, or mercury lamps, the picture
may flicker or change colors, or may have
horizontal bands of noise. You may be able to
improve the situation by adjusting the shutter
speed.
Make sure that the ND filter is set correctly.
z Tips
• While recording a bright subject, diffraction
may occur if you close the aperture further
down, resulting in a fuzzy focus (this is a
common phenomenon with video cameras). The
ND filter B suppresses this phenomenon and
gives better recording results.
To adjust the shutter speed
automatically
Press the SHUTTER SPEED button D
twice, or set the AUTO/MANUAL switch
H to AUTO.
The shutter speed value disappears, or
appears next to the shutter speed value.
Adjusting to natural color (White
balance)
b Notes
• When you set the AUTO/MANUAL switch H
to AUTO, other manually adjusted items (iris,
gain, white balance) also become automatic.
Adjusting the volume of light
(ND filter)
You can record the subject clearly by using
the ND filter B when the recording
environment is too bright.
The ND filters 1, 2 and 3 reduce the volume
of light to about 1/4, 1/16 and 1/64,
respectively.
If
flashes during the iris automatic
adjustment, set the ND filter to 1. If
flashes during the iris automatic
adjustment, set the ND filter to 2. If
You can adjust and fix the white balance
according to the lighting conditions of
Continued ,
33
recording environment.
Indicator
Shooting conditions
You can store white balance values in
memory A ( A) and memory B (
respectively. Unless a white balance is
readjusted, values will remain even after the
power has been turned off.
When you select PRESET, [OUTDOOR] or
[INDOOR] is selected, according to which
one you previously set with [WB PRESET]
• Under the lighting
conditions that change
in many ways, such as
a party hall
• Under strong light,
such as in a
photography studio
• Under sodium lamps
or mercury lamps
n
Indoor
([INDOOR])
B),
in the
(CAMERA SET) menu.
1
During recording or standby, set
the AUTO/MANUAL switch D to
MANUAL.
To save the adjusted white balance
value in memory A or B
1 Set the white balance memory switch to
A (
A) or B (
B) in step 3 of
“Adjusting to natural color (White
balance).”
2
3
Press the WHT BAL button A.
2 Capture a white subject, such as white
paper, full-screen in the same lighting
condition as the one in which the subject
is.
Set the white balance memory
switch B to any one of
PRESET/A/B.
3 Press the
(one push) button C.
B starts flashing rapidly. It
Select A or B for recording with the
white balance setting stored in memory
A or B.
A or
will stay on when the white balance
adjustment is completed and the
adjusted value is stored in
B.
A or
Indicator
Shooting conditions
• White balance values
adjusted for light
sources can be stored
in memory A and
memory B. Follow the
steps in “To save the
adjusted white balance
A
(Memory A)
B
(Memory B)
b Notes
• When a white balance adjustment value has not
been obtained successfully, A or
turns from rapid flashing to slow flashing.
Adjust the subject appropriately and set the
shutter speed to auto or around 1/60, then try
adjusting the white balance again.
B
• It may take a long time to adjust the white
balance, depending on the recording conditions.
If you want to perform a different operation
before completing the adjustment, set the white
balance memory switch B to another position
to temporarily suspend white balance
adjustment.
• Recording neon signs
or fireworks
• Recording sunset/
sunrise, just after
sunset or just before
sunrise
Outdoor
([OUTDOOR])
• Under daylight color
fluorescent lamps
34
To adjust the white balance
automatically
Picture profile
number
Recording condition
Press the WHT BAL button A or set the
AUTO/MANUAL switch D to AUTO.
PP1
PP2
PP3
PP4
PP5
PP6
You can assign your own
setting
You can assign your own
setting.
b Notes
• When you set the AUTO/MANUAL switch D
to AUTO, other manual adjusted items (iris,
gain, and shutter speed) also become automatic.
Appropriate setting to
record people
Appropriate setting to
record film-like pictures
Customizing the picture quality
(Picture profile)
Appropriate setting to
record sunset
Appropriate setting to
record black and white
pictures
1
2
During standby, press the
PICTURE PROFILE button B.
Select a picture profile number
with the SEL/PUSH EXEC dial A.
You can record with the settings of the
selected picture profile.
You can customize the picture quality by
adjusting picture profile items such as
[GAMMA] and [DETAIL].
3
Select [OK] with the SEL/PUSH
EXEC dial A.
Connect your camcorder to a TV or
monitor, and adjust the picture quality
while observing the picture on the TV or
monitor screen.
Picture quality settings for different
recording conditions have been stored in
[PP1] through [PP6] as default settings.
To cancel the picture profile recording
Select [OFF] in step 2 with the SEL/PUSH
EXEC dial A.
To change the picture profile
You can change the settings stored in [PP1]
through [PP6].
b Notes
• When you set [x.v.Color] in the
(CAMERA SET) menu to [ON], the picture
profile will be disabled.
1 Press the PICTURE PROFILE button
B.
Continued ,
35
2 Select the PICTURE PROFILE number
with the SEL/PUSH EXEC dial A.
3 Select [SETTING] with the SEL/PUSH
EXEC dial A.
4 Select an item to be adjusted with the
SEL/PUSH EXEC dial A.
5 Adjust the picture quality with the SEL/
PUSH EXEC dial A.
6 Repeat steps 4 and 5 to adjust other
items.
7 Select [
RETURN] with the SEL/
PUSH EXEC dial A.
8 Select [OK] with the SEL/PUSH EXEC
dial A.
A picture profile indicator appears.
36
GAMMA
To select a gamma curve.
Item
Description and settings
[STANDARD]
[CINEMATONE1]
[CINEMATONE2]
Standard gamma curve
Gamma curve 1 for producing tone of film camera images
Gamma curve 2 for producing tone of film camera images
COLOR MODE
To set type and level of colors.
Item
Description and settings
Selects a type of colors.
[TYPE]
[STANDARD]
: Standard colors
[CINEMATONE1] : Film camera image-like colors good with
[GAMMA] set to [CINEMATONE1]
[CINEMATONE2] : Film camera image-like colors good with
[GAMMA] set to [CINEMATONE2]
[LEVEL]
Sets a color level when you set [TYPE] to the settings other than
[STANDARD].
1 (close to color settings of [STANDARD]) to 8 (color settings of the
selected type)
COLOR LEVEL
To set the color level.
Item
Description and settings
-7 (light) to +7 (dark), -8: black and white
COLOR PHASE
To set the color phase.
Item
Description and settings
-7 (greenish) to +7 (reddish)
WB SHIFT
To set items for the white balance shift.
Item
Description and settings
[LB[COLOR TEMP]] Sets a color temperature offset value.
-9 (bluish) to +9 (reddish)
[CC[MG/GR]]
Sets a color correct offset value.
-9 (greenish) to +9 (magentish)
Continued ,
37
DETAIL
To set items for the detail.
Item
Description and settings
Sets the detail level.
-7 to +7
SKINTONE DETAIL
To adjust the detail of skintone areas to reduce wrinkles.
Item
Description and settings
[ON/OFF]
Suppresses details in skin-tone areas to reduce wrinkles. Select [ON]
when you want to use this function. You can also select other areas.
[LEVEL]
Sets the adjustment level.
1 (less adjust the detail) to 8 (more adjust the detail)
[COLOR SEL]
Sets color items for the detail adjustment.
[PHASE]
: Sets the color phase.
0 (purple) t 32 (red) t 64 (yellow) t
96 (green) t 127 (blue)
: Sets the color range.
[RANGE]
0 (selects no color), 1 (narrow: selects a single
color) to 31 (wide: selects multiple colors in
similar color phases and saturation)
The detail will not be adjusted when you set
[RANGE] to 0.
[SATURATION] : Sets the color saturation.
0 (selects a light color) to 31 (selects a deep color)
COPY
To copy the settings of the picture profile to another picture profile number.
RESET
To reset the picture profile to the default setting.
38
To copy the picture profile setting to
another picture profile number
Audio setup
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile number that
you want to copy from with the SEL/
PUSH EXEC dial A.
3 Select [SETTING] t [COPY] with
SEL/PUSH EXEC dial A.
4 Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial A.
5 Select [YES] with the SEL/PUSH
EXEC dial A.
6 Select [ RETURN] t [OK] with the
SEL/PUSH EXEC dial A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
1 Press the PICTURE PROFILE button
B.
2 Select the number of the picture profile
that you want to reset with the SEL/
PUSH EXEC dial A.
Channel setting
1 Select input sources with the CH1 (INT
MIC/INPUT1) switch C and the CH2
(INT MIC/INPUT1/INPUT2) switch
D.
3 Select [SETTING] t [RESET] t
[YES] t [
RETURN] t [OK]
with the SEL/PUSH EXEC dial A.
See the table below for the recording
channels.
Continued ,
39
LINE: For inputting sound from an
audio device
MIC: For inputting sound from an
external microphone that does
not support the +48V power
source.
MIC+48V:For inputting sound from a
device that supports the +48V
power source.
When you connect a microphone to the
INPUT2 jack, set the INPUT2 switch to
an appropriate position for that
microphone.
When the CH1 switch is set to
INT MIC
CH2 switch
Input channel and source
position
INT MIC Internal
microphone
(L)
CH1
Internal
microphone
(R)
CH2*
INPUT1
INPUT2
Internal
microphone
(mono)
CH1
b Notes
• Do not operate the INPUT1/INPUT2 switches
during recording to prevent noise from being
recorded.
• When you connect a device that supports the
+48V power source to the INPUT1 or INPUT2
jack, set the INPUT1/INPUT2 switches to MIC
prior to connecting the device. When you
disconnect the device, set the INPUT1/INPUT2
switch to MIC first, then disconnect it.
XLR INPUT1
CH2**
CH1
Internal
microphone
(mono)
XLR INPUT2
CH2**
When the CH1 is set to INPUT1
• When you connect a microphone that does not
support the +48V power source to the INPUT1
or INPUT2 jack, set the INPUT1/INPUT2
switch to MIC. If you use it with the INPUT1/
INPUT2 switch set to MIC+48V, it may be
damaged or the recorded sound may be
distorted.
CH2 switch
Input channel and source
position
INT MIC XLR INPUT1
CH1
Internal
microphone
(mono)
CH2**
INPUT1
INPUT2
XLR INPUT1
CH1
Adjusting the volume
You can adjust the volume of an internal
microphone or a microphone connected to
the INPUT1/INPUT2 jacks.
CH2**
XLR INPUT1
XLR INPUT2
CH1
CH2**
z Tips
* The recording level of channel 2 is
and the CH2 (INT MIC/INPUT1/INPUT2)
switches.
synchronized with that of channel 1 when only
the internal microphone is used. The recording
level of channel 2 is controlled with the CH1
(AUDIO LEVEL) dial and the CH1 (AUTO/
MAN) switch.
1 Set the AUTO/MAN (CH1/CH2) switch
E of the channel to be adjusted to
MAN.
**You can adjust the recording levels of channel 1
and channel 2 separately.
appears on the screen.
2 Turn the AUDIO LEVEL dial F to
adjust the volume during recording or
standby.
2 Set the INPUT1 switch B to an
appropriate position for the microphone
connected to the INPUT1 jack A.
40
To restore automatic adjustment
Set the AUTO/MAN (CH1/CH2) switch E
of the manually adjusted channel to AUTO.
4
Press the record button.
An about 6-second movie is stretched to
about 24 seconds and recorded as a
slow-motion movie.
z Tips
• To check other audio settings, press the
STATUS CHECK button G.
Recording ends when [Recording...]
disappears from the screen.
• For other settings, see the
(AUDIO SET)
Setting the headphone sound
To cancel [SMOOTH SLOW REC], press
the MODE button.
To change the setting
Press the MENU button, and select the
setting to be changed.
x
REC MODE
You can select the record mode from [1080/
60i FX], [1080/60i FH], [1080/60i HQ], or
[1080/60i LP] for smooth slow recording.
You can select the channel, CH1 or CH2, to
output from the headphone.
See [HEADPHONE OUT] on the sound at
STEREO MIX (p. 75).
x TIMING
You can use this to select when recording
starts in relation to when the record button
(handle record button) is pressed.
Recording with the SMOOTH
SLOW REC function
Fast moving subjects and actions, which
cannot be captured under the general
recording conditions, can be recorded in
smooth moving slow-motion.
[6sec AFTER]*
This is useful for recording fast actions
such as a golf or tennis swing.
[6sec BEFORE]
1
2
Press the MODE button.
* The default setting is [6sec AFTER].
b Notes
• Sounds cannot be recorded.
• The shutter speed is automatically set to 1/250
second when you start [SMOOTH SLOW
REC]. (You cannot set a slower shutter speed
than 1/250 second.)
On the LCD screen, select
[CAMERA] t [SMOOTH SLOW
REC].
• The recording time may be shorter, depending
on recording conditions.
• The image quality is lower than with the regular
recording.
3
Select the image quality.
Continued ,
41
• The camcorder does not perform relay recording
with memory cards during [SMOOTH SLOW
REC]. If the space on the memory card is
insufficient, the camcorder records movies only
as long as there is space available.
• The time of the movie recorded using
[SMOOTH SLOW REC] is recorded after being
converted to slow-motion, not the time when the
movie is actually shot.
• Progressive recording is not available for
[SMOOTH SLOW REC]. The progressive
setting is changed to the interlace setting
automatically.
• Even if you change the record mode with
[
REC MODE], the record mode of the
standard definition image quality (SD) does not
change.
42
Assigning the functions to the ASSIGN buttons
Some functions can be assigned to the
ASSIGN buttons for use. You can assign a
single function to any one of the ASSIGN 1
to 7 buttons.
ASSIGN 4-6 buttons
ASSIGN 1-3 buttons
Functions you can assign to the
ASSIGN buttons
The buttons in parentheses indicate that the
functions are assigned to the buttons by
default.
button)
• PUSH AUTO IRIS (p. 31)
• BACK LIGHT (p. 70)
• SPOTLIGHT (p. 70)
• STEADYSHOT (p. 71)
• D.EXTENDER (p. 72)
• FADER (p. 72)
• PEAKING (p. 77)
• MARKER (p. 77)
ASSIGN 7/
EXPANDED
FOCUS button
• MODE (p. 56)
1
2
Press the MENU button B.
Select
(OTHERS) t [ASSIGN
BUTTON] with the SEL/PUSH
EXEC dial A.
3
Select the ASSIGN button to
which you want to assign a
function with the SEL/PUSH
EXEC dial A.
Continued ,
43
•
[--------] appears if no function is assigned
to the ASSIGN button.
4
Select the function that you want
to assign with the SEL/PUSH
EXEC dial A.
5
6
7
Select [OK] with the SEL/PUSH
EXEC dial A.
Select [
RETURN] with the SEL/
PUSH EXEC dial A.
Press the MENU button B to hide
the menu screen.
44
Playback
VISUAL INDEX button
DISPLAY button
ASSIGN 6/VISUAL INDEX button
MODE button
VOLUME button
You can play back movies as follows:
1
Slide the POWER switch to ON.
Press and hold the
green button.
2
Press the VISUAL INDEX button.
The VISUAL INDEX screen appears after a few seconds.
Recording media
Playback mode
Previous
Next
Thumbnail
(movie)
Current movie
data (p. 46)
You can display the VISUAL INDEX screen also by pressing the MODE button, followed
by touching [PLAY] t [VISUAL INDEX] on the screen.
You can turn on or off the time and date display on the thumbnails by pressing the
DISPLAY button.
Continued ,
45
Playback (Continued)
3
Play back movies.
1 Touch the recording media you want to play back.
: Memory card A
: Memory card B
2 Touch the playback mode, and select the desired image quality of movies.
Playback mode
: High definition image quality (HD)
: Standard definition image quality (SD)
3 Touch twice the thumbnail of the movie you want to play back.
The first touch will show the information on the movie at the lower part of the screen.
ADate and time of recording started
BResolution
CFrame rate
DRecord mode
EDuration
FTime code of recording started
Time code will not be displayed correctly when you play back the memory card with no time
code, or the memory card with time code that your camcorder does not support.
• i appears with the movie that has been most recently played back or recorded. If you touch the
movie with i, you can continue playback from the previous time.
46
Your camcorder starts playing the selected movie.
Previous
Stop
Next
Fast forward
Pause/Play
Fast reverse
b Notes
• You may not be able to play back movies recorded on other camcorders.
z Tips
• When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX
screen.
• Touch
/
during pause to play back movies slowly.
• As you repeat touching
/
during playback, movies are played back as fast as about 5 times
t about 10 times t about 30 times t about 60 times.
• Reduced-size images which enable you to view many movies at the same time on the VISUAL INDEX
screen are called “thumbnails.”
• You can operate playback using the PREV/PLAY/NEXT/STOP/PAUSE/SCAN/SLOW buttons on the
camcorder.
To adjust the volume
Adjust the volume with the VOLUME buttons.
To return to the recording mode
Press the VISUAL INDEX button.
Viewing still images
You can create still images by capturing scenes from movies that you recorded on your
camcorder (p. 59).
View still images.
1 Touch the recording media you want to view.
: Memory card A
: Memory card B
Continued ,
47
Playback (Continued)
2 Touch the playback mode, then select
(still image).
Playback mode
3 Touch twice the thumbnail of the still image you want to view.
The first touch will show the information on the still image at the lower part of the screen.
ADate and time of recording
BResolution
CImage size
DPlayback folder
EPlayback folder edge
Indicates that this is the first or the last page of the playback folder. This does not appear
when there is only 1 playback folder.
• B appears on the still image that was played back most recently.
Your camcorder displays the selected still image.
Next
VISUAL INDEX
Previous
48
Changing/checking the settings in your
camcorder
Displaying recording data (Data
code)
You can display information, including
date, time, and camera data automatically
stored during recording on the screen
during playback.
Press the DATA CODE button A
during playback or pause.
The screen changes like “date and time
display t camera data display t no
display” as you press the button.
A STEADYSHOT
B Exposure
Changing the screen
appears during playback of the
movie recorded with the iris, gain or
shutter speed automatically adjusted.
appears during playback of the
movie recorded with the iris, gain or
shutter speed manually adjusted.
You can turn on and off the display of the
time code, and other information on the
screen.
Press the DISPLAY button B.
C Iris
The screen indicators turn on (displayed)
and off (not displayed) as you press the
button.
In the recording mode, the screen changes
like “detailed display t simple display t
no display” as you press the button.
appears in the iris value display
area during playback of the movie
recorded with the iris manually adjusted
to its maximum value.
D Gain
E Shutter speed
F White balance
z Tips
• You can display the screen indicators during
playback on a TV. Select [ALL OUTPUT] of
Continued ,
49
Changing/checking the settings in your camcorder (Continued)
b Notes
1
Press the STATUS CHECK button
C.
• The exposure correction value (EV), shutter
speed, iris and flash on/off will be displayed
during viewing still images.
• When you play back the memory card on other
devices, the camera data may be displayed
incorrectly. Confirm the correct camera data on
your camcorder.
Displaying the settings in your
camcorder (Status check)
You can check the settings of the following
items.
• Audio setup such as microphone volume
level (p. 75)
2
Turn the SEL/PUSH EXEC dial D
until a desired display shows up
on the screen.
• Output signal setup ([VIDEO OUT], etc.)
• Functions assigned to the ASSIGN
buttons (p. 43)
AUDIO t OUTPUT t ASSIGN t
CAMERA t MEDIA INFO t
BATTERY INFO
Setup items are displayed according to
the settings of the camcorder when it is
turned on.
• Camera setup (p. 69)
• Memory card information
You can check the estimated used and free
spaces.
To hide the display
Press the STATUS CHECK button C.
• Battery Info
You can check the remaining capacity of
the attached battery.
50
Connecting a monitor or a TV (Continued)
Connecting to a high definition TV
High definition image quality (HD) movies are played back in high
definition image quality (HD).
Standard definition image quality (SD) movies are played back in
standard definition image quality (SD).
COMPONENT IN VIDEO
HDMI IN
AUDIO
: Signal flow
Menu Setting
Type Camcorder
Cable
TV
(REC/OUT SET)
menu t
A/V connecting cable (supplied)
[VIDEO OUT] t
[COMPONENT
OUTPUT] t
[1080i/480i] (default)
COMPONENT
IN
(White)
(Red)
AUDIO
Component video cable
(supplied)
(Green) Y
(Blue) PB/CB
(Red) PR/CR
VIDEO
b Notes
• If you connect only component video plugs, audio signals are not output. Connect the white and red plugs
to output audio signals.
52
: Signal flow
Menu Setting
Type Camcorder
Cable
TV
(REC/OUT SET)
HDMI IN
menu t
[VIDEO OUT] t
[HDMI OUTPUT] t
HDMI cable (sold separately)
b Notes
• Use an HDMI cable with the HDMI logo.
• Images are not output from the HDMI OUT jack of your camcorder, if copyright protection signals are
recorded in the movies.
• Your TVs may not function correctly (for example, no sound or image).
• Do not connect the HDMI OUT jack of your camcorder and HDMI OUT jack of the external device with
the HDMI cable. This may cause a malfunction.
• This camcorder is not compatible with “BRAVIA” sync.
Continued ,
53
Connecting a monitor or a TV (Continued)
Connecting to a 16:9 (wide) or 4:3 TV
High definition image quality (HD) movies are played back
in standard definition image quality (SD).
Standard definition image quality (SD) movies are played
back in standard definition image quality (SD).
COMPONENT IN VIDEO
AUDIO
VIDEO/AUDIO
To set the aspect ratio according to the connected TV (16:9/4:3)
Select
your TV (p. 74).
(REC/OUT SET) t [VIDEO OUT] t [TV TYPE] and the aspect ratio to match
z Tips
• When your TV is monaural (when your TV has only one audio input jack), connect the yellow plug of the
A/V connecting cable to the video input jack and connect the white (left channel) or the red (right
channel) plug to the audio input jack of your TV or VCR. When you want to play the sound in monaural
mode, use a connecting cable for that purpose.
: Signal flow
Type Camcorder
Cable
TV
Menu Setting
(REC/OUT SET)
menu t
A/V connecting cable (supplied)
[VIDEO OUT] t
[COMPONENT
OUTPUT] t
COMPONENT
IN
(White)
(Red)
AUDIO
[VIDEO OUT] t
[TV TYPE] t
Component video cable
(supplied)
(Green) Y
(Blue) PB/CB
(Red) PR/CR
VIDEO
b Notes
• If you connect only component video plugs, audio signals are not output. Connect the white and red plugs
to output audio signals.
54
: Signal flow
Menu Setting
Type Camcorder
Cable
TV
(No other jacks should be
connected.)
A/V connecting cable (supplied)
(REC/OUT SET)
menu t
(Yellow)
VIDEO
AUDIO
(White)
(Red)
[VIDEO OUT] t
[TV TYPE] t
* Change the settings according to the TV connected.
When connecting to your TV via a VCR
VCR. Connect your camcorder to the LINE IN input on the VCR. Set the input selector on the
VCR to LINE (VIDEO 1, VIDEO 2, etc.).
b Notes
• Images are output in standard definition image quality (SD) when the A/V connecting cable is used.
• When the frame rate of [REC FORMAT] is 24p or 30p, images are converted to the interlace signals by
the pull-down system to be output.
z Tips
• If you connect your camcorder to the TV using more than one type of cable to output images, the order of
priority of the TV input jacks is as follows:
HDMI t component video t video.
• HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
55
Editing
Operating the MODE menu
You can edit the recorded movies, format
memory cards, etc.
4
Touch the desired item.
Example: [DELETE]
MODE button
POWER switch
5
Operate following the
instructions on the screen.
MODE button
To hide the MODE menu screen
Touch
, or press the MODE button.
To return to the previous screen
1
2
Set the POWER switch to ON.
Press the MODE button.
Touch
.
3
Touch the desired category.
Example: [EDIT] category
56
Protecting recorded images (Protect)
Protect movies and still images to avoid
deleting them by mistake.
To undo the protection of movies and
still images
Touch the movie or still image marked with
- in step 4.
- disappears.
z Tips
• You can also protect movies and still images by
pressing the MENU button on the VISUAL
INDEX screen or the playback screen.
1
2
3
Press the MODE button.
Touch [EDIT] t [PROTECT].
To protect movies, touch [MOVIE
PROTECT] t select the desired
memory card and image quality.
To protect still images, touch [PHOTO
PROTECT] t select the desired
memory card.
4
Touch the movies or still images
to be protected.
- is displayed on the selected images.
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
• You can select up to 100 images at one time.
5
Touch
t [YES] t
.
57
Using the Playlist of movies
from your camcorder during the operation. It
may damage the memory card.
• You cannot add still images to a Playlist.
The Playlist is a list showing thumbnails of
the movies that you have selected.
The original movies are not changed even if
you edit or erase the movies added to the
Playlist.
z Tips
• You can add a maximum of 999 high definition
image quality (HD) movies, or 99 standard
definition image quality (SD) movies to the
Playlist.
Creating the Playlist
b Notes
• You can also add movies by pressing the
MENU button on the VISUAL INDEX screen,
the playback screen or the Playlist screen.
• High definition image quality (HD) movies and
standard definition image quality (SD) movies
are added to individual Playlists.
Playing the Playlist
1
2
Press the MODE button.
1
2
Press the MODE button.
Touch [EDIT] t [PLAYLIST EDIT]
t [ADD] t select the desired
memory card and image quality.
Touch [PLAY] t [PLAYLIST] t
select the desired memory card
and image quality.
Movies added to the Playlist appear.
3
Touch the movie to be added to
the Playlist.
is displayed on the selected movies.
3
Touch the movie you want to play
back.
The Playlist is played back from the
selected movie to the end, then the
screen returns to the Playlist screen.
To erase unnecessary movies from
the Playlist
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
1 Press the MODE button.
2 Touch [EDIT] t [PLAYLIST EDIT]
t [ERASE] t select the desired
memory card and image quality.
4
Touch
t [YES] t
.
• To erase all the movies from the Playlist,
touch [EDIT] t [PLAYLIST EDIT] t
[ERASE ALL] t select the desired
memory card and image quality.
b Notes
3 Touch the movie to be erased from the
list.
• Do not remove the battery pack, the AC Adaptor
or the memory card that contains the movies
is displayed on the selected movies.
58
Capturing still images
from a movie
You can save a selected frame from a
recorded movie as a still image.
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
4 Touch
t [YES] t
.
1
2
Press the MODE button.
z Tips
• Even if you erase a movie from a Playlist, the
original movie is not deleted.
• You can also erase movies by pressing the
MENU button on the Playlist screen or the
Playlist playback screen.
Touch [EDIT] t [PHOTO
CAPTURE] t select the desired
memory card and image quality.
To change the order within the Playlist
3
4
Touch the movie to be captured.
1 Press the MODE button.
The selected movie starts playback.
2 Touch [EDIT] t [PLAYLIST EDIT]
t [MOVE] t select the desired
memory card and image quality.
Touch
at the point where
you want to capture.
3 Touch the movie to be moved.
is displayed on the selected movies.
The movie pauses. Play and pause
toggles as you press
.
z Tips
• Press and hold the image down to preview
After you select the point with
fine adjustment with
, make
the image. Touch
previous screen.
to return to the
/
.
4 Touch
.
5 Select the destination with B/b.
6 Touch
t [YES] t
.
z Tips
• When you select multiple movies, the movies
are moved following the order appearing in the
Playlist.
• You can also reorder movies by pressing the
MENU button on the Playlist screen.
Returns to the beginning of the selected
movie
5
Touch
.
The captured still image is saved on the
memory card selected for movies. When
capturing is finished, the screen returns
to pause.
• To continue capturing, touch
, then
repeat steps from step 4.
• To capture a still image from another movie,
touch , then repeat steps from step 3. If
you change the memory card and the image
Continued ,
59
movie (Continued)
Dividing a movie
You can divide a movie at a designated
point.
quality of the movies, start again from the
beginning.
1
2
Press the MODE button.
6
Touch
t
.
Touch [EDIT] t [DIVIDE] t
select the desired memory card
and image quality.
b Notes
• The image size is fixed depending on the image
quality of the movie:
– [2.1M] with high definition image quality
(HD)
– [0.2M] in 16:9 (wide) with standard definition
image quality (SD)
– [VGA(0.3M)] in 4:3 with standard definition
image quality (SD)
• The memory card where you want to save still
images should have enough free space.
3
4
Touch the movie to be divided.
The selected movie starts playback.
Touch
at the point where you
want to divide.
The movie pauses. Play and pause
• The recording date and time of captured still
images is the same as the recording date and
time of the movies.
toggles as you press
.
• If the movie you are capturing from has no data
code, the recording date and time of the still
image will be the date and time you captured
from the movie.
After you select the point with
fine adjustment with
, make
/
.
Returns to the beginning of the selected
movie
5
Touch
t [YES] t
.
b Notes
• You cannot restore movies once they are
divided.
• Do not remove the battery pack, the AC Adaptor
or the memory card that contains the movies
from your camcorder during the operation. It
may damage the memory card.
60
Deleting movies and
still images
You can free media space by deleting
movies and still images from the memory
card.
• A slight difference may occur from the point
where you touch and the actual dividing
point, as your camcorder selects the dividing
point based in about half-second increments.
• If you divide the original movie, the movie
added to the Playlist will also be divided.
b Notes
• You cannot restore images once they are
deleted.
• Do not remove the battery pack, the AC Adaptor
or the memory card that contains the movies or
still images from your camcorder during the
operation. It may damage the memory card.
z Tips
• You can also divide a movie by pressing the
MENU button on the VISUAL INDEX screen
or the playback screen of movies.
• You cannot delete protected movies and still
images. Undo the protection of the movies and
still images to delete them, before you try to
delete them (p. 57).
• If the deleted movie is included in the Playlist
deleted also from the Playlist.
• Save important movies and still images in
z Tips
• You can select up to 100 images at one time.
• To delete all data recorded on the memory card
and recover all the recordable space of the
1
2
3
Press the MODE button.
Touch [EDIT] t [DELETE].
To delete movies, touch [MOVIE
DELETE] t select the desired
memory card and image quality.
To delete still images, touch [PHOTO
DELETE] t select the desired
memory card.
4
Touch the movies or still images
to be deleted.
is displayed on the selected images.
Continued ,
61
(Continued)
Formatting the
memory card
Formatting deletes all data from the
memory card to recover recordable free
space.
b Notes
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor to
prevent your camcorder from running out of
power during the operation.
• To avoid the loss of important images, you
memory card.
• Protected movies and still images are also
deleted.
z Tips
• Press and hold the image down to preview
the image. Touch
previous screen.
to return to the
1
2
Press the MODE button.
5
Touch
t [YES] t
.
Touch [MANAGE MEDIA] t
[MEDIA FORMAT].
To delete all movies/still images at
one time
In step 3, touch [MOVIE DELETE ALL]
t select the desired memory card and
image quality t [YES] t [YES] t
3
4
Touch the memory card to be
formatted.
.
• To delete all still images at one time, touch
[PHOTO DELETE ALL] t select the desired
memory card t [YES] t [YES] t
.
Touch [YES] t [YES] t
.
b Notes
• Protected movies and still images are not
deleted from the memory card.
b Notes
• While [Executing...] is displayed, do not operate
the buttons on the camcorder, or disconnect the
AC Adaptor or remove the memory card from
the camcorder. (The access lamp is lit or
z Tips
• You can also delete images by pressing the
MENU button on the VISUAL INDEX screen
or the playback screen of movies and still
images.
flashing while formatting the memory card.)
62
Preventing data on the memory card from being
recovered
Unintelligible data will be written on the
memory card. Thus, it may become more
difficult to recover any original data. Even
if you format the memory card, there may
be some data remaining. Therefore, when
you dispose of or transfer the memory card,
it is recommended that you perform a
The media empty screen appears.
STOP button
[
MEDIA EMPTY]/[
MEDIA
EMPTY] operation.
b Notes
• If you perform this operation, all stored data are
deleted. To avoid the loss of important images,
operation.
• You cannot perform this operation unless you
connect the AC Adaptor to the wall outlet (wall
socket).
• Disconnect all cables except the AC Adaptor.
Do not disconnect the AC Adaptor during the
operation.
7
Touch [YES] t [YES] t
.
• Do not apply any vibrations or shocks to your
camcorder during this operation.
b Notes
• It may take from several minutes to several
hours to empty recording media, depending on
the capacity. You can check the actual time
required on the LCD screen.
• If you stop the operation while [Executing...]
appears, be sure to complete the operation by
performing [MEDIA FORMAT] or emptying
when you use the memory card next time.
1
Operate the camcorder on an
outside power source using the
AC Adaptor (p. 19).
2
3
4
Set the POWER switch to ON.
Press the MODE button.
Touch [MANAGE MEDIA] t
[MEDIA FORMAT].
5
6
Touch the memory card to be
formatted.
The format screen appears.
Press and hold the STOP button
for more than 3 seconds.
63
Repairing the image
database file
This function checks the management
information and the consistency of movies
on the memory card, and repairs any
inconsistencies found.
b Notes
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor to
prevent your camcorder from running out of
power during the operation.
1
2
Press the MODE button.
Touch [MANAGE MEDIA] t
[REPAIR IMAGE DB FILE].
3
4
Touch the memory card you want
to check the management file.
Touch [YES].
The management file check starts.
Touch
and quit the management
file check if no inconsistency is found.
5
Touch [YES].
After [Completed.] appears, touch
.
b Notes
• If you stop the operation while [Repairing the
Image Database File] appears, be sure to
complete the operation as described above when
you use the memory card next time.
64
Using the Menu
Operating the menu
You can change various settings or make
detailed adjustments using the menu items
displayed on the screen.
3
Turn the SEL/PUSH EXEC dial
until the icon of the desired menu
is highlighted, then press the dial
to select the menu.
MENU button
V/v/B/b/EXEC buttons
CAMERA SET (p. 69)
REC/OUT SET (p. 73)
OTHERS (p. 80)
POWER switch
4
5
Turn the SEL/PUSH EXEC dial
until the desired menu item is
highlighted, then press the dial to
select the item.
SEL/PUSH EXEC dial/
B/b buttons
MENU button
z Tips
• You may select menu items also with the B/b
buttons.
1
2
Set the POWER switch to ON.
Turn the SEL/PUSH EXEC dial
until the desired setting is
highlighted, then press the dial to
confirm the setting.
Press the MENU button.
The menu screen appears.
Continued ,
65
Operating the menu (Continued)
6
Press the MENU button to hide
the menu screen.
To return to the previous screen, select
[
RETURN].
b Notes
• The available menu items vary depending on the
context of your camcorder during recording or
playback.
66
.
z: Functions that return to the default settings when you switch the
format, perform the functions by the MODE button, or turn off the
camcorder.
Menu items
: Functions that can be assigned to the ASSIGN buttons.
(AUDIO SET) menu (p. 75)
(CAMERA SET) menu
(DISPLAY SET) menu
z
z
z
(REC/OUT SET) menu
Continued ,
67
Menu items (Continued)
(OTHERS) menu (p. 80)
REC LAMP
(SMOOTH SLOW REC)
menu (p. 41)
REC MODE
TIMING
PROTECT
ADD TO PLAYLIST
DIVIDE
DELETE
DELETE ALL
(PLAYLIST EDIT) menu
ADD
MOVE
ERASE
ERASE ALL
68
(CAMERA SET)
menu
expanded to the negative range. Especially
in a bright environment, minus gain control
allows more suitable gain setting and
enables low noise recording. The dynamic
range of the camcorder is not reduced when
you set [MINUS AGC] to [ON].
Settings to adjust your camcorder to the
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
BON
menu items.
Enables minus gain control (up to -3 dB)
during automatic gain control, as required.
Press the MENU button t select
(CAMERA SET) with the SEL/PUSH
EXEC dial.
OFF
Disables minus gain control during
automatic gain control.
IRIS RING ROTATE
GAIN SET
You can select the operating direction of
the iris ring.
You can set gain values for H, M and L
positions of the GAIN switch. The default
settings of [H], [M] and [L] are 18 dB, 9 dB
and 0 dB, respectively.
BNORMAL
Makes images dark with clockwise
rotation of the iris ring.
1 Select [H], [M] or [L] with the SEL/
PUSH EXEC dial.
OPPOSITE
Makes images dark with counter-
clockwise rotation of the iris ring.
2 Set the gain value with the SEL/PUSH
EXEC dial, and press the dial.
You can select the value between -6 dB
and 21 dB by 3 dB. The larger the value,
the higher the gain.
z Tips
• You can assign this function to an ASSIGN
3 Select [OK] with the SEL/PUSH EXEC
dial.
WB PRESET
4 Press the MENU button to hide the
menu screen.
You can use the preset white balance. For
AGC LIMIT
AWB SENS
You can select the upper limit for the Auto
Gain Control (AGC) from [OFF] (21 dB,
the default setting), [18dB], [15dB],
You can set the auto white balance
operation under a reddish light source such
as an incandescent lamp or candle, or under
a bluish light source such as in outdoor
shade.
[12dB], [9dB], [6dB], [3dB] and [0dB].
b Notes
• If you adjust the gain manually, you cannot
obtain the effect of [AGC LIMIT].
BINTELLIGENT
Automatically adjusts the white balance so
that scenes look natural for the light
source.
MINUS AGC
When you set this function to [ON], the
automatic gain control range can be
Continued ,
69
Press the MENU button t select
(CAMERA SET) with the SEL/PUSH EXEC dial.
HIGH
AUTO IRIS LIMIT
Automatically adjusts the white balance
while reducing redness or blueness.
You can select the highest iris value for the
automatic adjustment from [F11], [F9.6],
[F8], [F6.8], [F5.6], [F4.8] and [F4]. The
default setting is [F11].
MIDDLE
LOW
Automatically adjusts the white balance
while increasing redness or blueness.
b Notes
• This function is not effective during the manual
iris adjustment.
b Notes
• This is only effective when white balance is
adjusted automatically.
• [AWB SENS] is not effective under a clear sky
or the sun.
FLICKER REDUCE
BON
Reduces flickering. Flickering of the
screen under a light source such as
fluorescent lamps will be reduced.
AE SHIFT
x ON/OFF
OFF
You can turn on or off the function. When
[ON] is selected,
Not reduce flickering.
and selected value
appear on the screen.
b Notes
x LEVEL
• Flickering may not be reduced for certain light
sources.
You can set an offset value to adjust the
automatic exposure adjustment value from
[-7] (dark) - [0] (standard) - [+7] (bright)
with the SEL/PUSH EXEC dial. The
default setting is [0].
.
BACK LIGHT
When you set this function to [ON] (.),
you can correct backlighting. The default
setting is [OFF].
b Notes
• This function is not effective while you adjust
the iris, shutter speed and gain all manually.
b Notes
• [BACK LIGHT] is set to [OFF] when you set
[SPOTLIGHT] to [ON].
• [BACK LIGHT] is set to [OFF] if all of iris,
gain, and shutter speed are adjusted manually.
z Tips
• You can assign an ASSIGN button to work as
z Tips
AE RESPONSE
• You can assign this function to an ASSIGN
You can select the speed at which the
exposure is adjusted automatically
following the changes in the brightness of
the subject. You can select the speed from
[FAST], [MIDDLE] and [SLOW]. The
default setting is [FAST].
SPOTLIGHT
When you set this function to [ON] ( ),
you can prevent overexposure of light while
recording a subject under strong light, such
as a stage. For example, you can prevent
people's faces from being over-exposed.
The default setting is [OFF].
70
b Notes
• [SPOTLIGHT] is set to [OFF] when you set
[BACK LIGHT] to [ON].
• [SPOTLIGHT] is set to [OFF] if all of iris, gain,
and shutter speed are adjusted manually.
x ACTIVE STEADYSHOT TYPE
You can select a type of powerful camera-
shake reduction for different recording
situations.
BSTANDARD
z Tips
Reduces camera shakes more powerfully
while you are walking or moving around.
• You can assign this function to an ASSIGN
WIDE CONVERSION
This item is provided for using a wide
conversion lens (sold separately) in
[ACTIVE STEADYSHOT] mode, and
especially effective for Sony wide
conversion lens.
STEADYSHOT
x SET
BSTEADYSHOT
You can activate the camera-shake
reduction setting.
b Notes
• At the [ACTIVE STEADYSHOT] setting, the
imaging field shifts slightly to the telephoto
side, and the resolution will deteriorate slightly,
as well.
ACTIVE STEADYSHOT (
)
You can use the camera-shake reduction
with more powerful effect.
z Tips
OFF
• You can assign an ASSIGN button to work as
Select [OFF] (
tripod (sold separately) to make images
look natural.
) when you use a
AF ASSIST
x STEADYSHOT TYPE
You can select a type of camera-shake
reduction for different recording situations.
When you set this function to [ON], you
can temporarily focus manually using the
focus ring during the auto focus adjustment.
The default setting is [OFF].
HARD
Reduces camera shakes considerably.
This setting is not suitable for recording
when you are using techniques like
panning or tilting.
b Notes
• This function is effective only when the FOCUS
BSTANDARD
Standard camera-shake reduction.
HANDLE ZOOM
SOFT
You can select the zoom speed for the FIX
position of the handle zoom switch from [1]
(slow) through [8] (fast). The default setting
is [3].
Reduces camera shakes moderately. Slight
unsteadiness remains in movies, which
make the movies look as they are.
WIDE CONVERSION
This item is provided for a wide
conversion lens (sold separately), and
especially effective for Sony wide
conversion lens.
Continued ,
71
Press the MENU button t select
(CAMERA SET) with the SEL/PUSH EXEC dial.
b Notes
D.EXTENDER
• This function is automatically set to [OFF] (the
default setting) when you switch the format,
perform the function by the MODE button, or
turn off the camcorder.
• You cannot set this function when the remaining
space of the memory card is less than 1 minute.
When you set this function to [ON]
(
), the displayed image becomes
about 1.5 times larger. The image quality
decreases because the image is digitally
processed. This function helps you to focus
on far-away subjects such as a wild bird
away at a distance. The default setting is
[OFF].
z Tips
• You can assign this function to an ASSIGN
b Notes
x.v.Color
• The function returns to the default setting when
you switch the format, perform the function by
the MODE button, or turn off the camcorder.
When you set this function to [ON]
(
), you can record with the wider
color range. Your camcorder can reproduce
brilliant and vivid colors for flowers and the
beautiful blue-green of tropical oceans.
The default setting is [OFF].
z Tips
• You can assign this function to an ASSIGN
FADER
b Notes
• The colors may not be well reproduced when
you play back a movie recorded with this
function set to [ON] on a TV that does not
support x.v.Color.
• You cannot set [x.v.Color] in the following
cases:
– When standard definition image quality (SD)
is selected.
– During recording movies
You can add visual effects to transition
between scenes.
1 Select [WHITE FADER] or [BLACK
FADER] during standby to fade in with the
selected effect, or recording to fade out
with the selected effect.
2 Press the record button.
The fader indicator stops flashing and
disappears when the fading is complete.
• When you set [x.v.Color] to [ON], the picture
profile will be disabled.
To cancel before starting the operation,
select [OFF] in step 1.
The setting will be cleared every time you
press the record button.
COLOR BAR
x ON/OFF
When you select [ON], you can display
color bars on the screen or record them on
the memory card. This function helps you
to adjust colors when you view movies
recorded with your camcorder on a TV or a
monitor. The default setting is [OFF].
Fading out
Fading in
WHITE FADER
b Notes
• This function is automatically set to [OFF]
when you turn off the camcorder.
BLACK FADER
• You cannot change the setting during recording
or expanded focus operation, or when fader is
set.
72
(REC/OUT SET)
menu
Recording settings, input and output
x TYPE
Selects a type of the color bars.
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 65 for details on selecting
menu items.
Press the MENU button t select
(REC/OUT SET) with the SEL/PUSH
EXEC dial.
TYPE 1
TYPE 2
TYPE 3
REC FORMAT
WIDE REC
You can record a movie in an aspect ratio
that matches that of a TV that you want to
connect. Refer also to the instruction
manuals that come with the TV.
BON
Records a movie in an aspect ratio that
matches the full screen of a 16:9 (wide)
TV.
OFF (
)
Records a movie in an aspect ratio that
matches the full screen of a 4:3 TV.
TYPE 4 (75% brightness of TYPE 3)
b Notes
• Set [TV TYPE] correctly to suite a TV that you
want to connect for playback.
z Tips
• You can assign an ASSIGN button to work as
• The aspect ratio will be fixed to 16:9 and you
cannot set it to 4:3 when you record movies with
high definition image quality (HD).
Continued ,
73
Press the MENU button t select
(REC/OUT SET) with the SEL/PUSH EXEC dial.
b Notes
• When you play back the standard definition
image quality (SD) movies recorded with
VIDEO OUT
x HDMI OUTPUT
You can select the resolution of the output
signal from the HDMI OUT jack.
[
WIDE REC] set to [ON], images may
appear normal in vertical direction, but
compressed in horizontal direction, depending
on the TV.
BAUTO
720p/480i
1080i/480i
480p
480i
x COMPONENT OUTPUT
You can select the resolution of the output
signal from the COMPONENT OUT jacks.
720p/480i
B1080i/480i
480i
x TV TYPE
You need to convert the signal depending
on a type of your TV when playing back the
movie. The recorded movies are played
back as following illustrations.
B16:9
Select to view your movies on a 16:9
(wide) TV.
16:9 format
movies
4:3 format
movies
4:3
Select to view your movies on a 4:3
standard TV.
16:9 format
movies
4:3 format
movies
74
(AUDIO SET) menu
Settings for the audio recording (AUDIO
appears on the status check
screen.
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
x INT MIC WIND
OFF
Disables wind noise reduction.
Press the MENU button t select
(AUDIO SET) with the SEL/PUSH
EXEC dial.
BON
Enables wind noise reduction.
appears on the status check screen.
XLR SET
AUDIO LIMIT
x XLR AGC LINK
You can set the clipping-noise reduction
function for CH1/CH2.
You can select either linked or separate
AGC (Auto Gain Control) of CH1 and CH2
when using an external microphone (sold
separately).
BOFF
Disables the function.
ON
BSEPARATE
Enables the function.
Separately applies the AGC for CH1/CH2.
Sound inputs from CH1/CH2 will be
recorded as separate sound.
b Notes
• This function is available only when you set the
AUTO/MAN (CH1/CH2) switch to MAN.
LINKED (
)
Applies the AGC of CH1 linked with that
of CH2. Sound inputs from CH1/CH2 will
be recorded as a set of sound such as stereo
HEADPHONE OUT
sound.
screen.
appears on the status check
A
You can set the sound to output to the
headphone when the HEADPHONE
MONITOR switch is set to STEREO MIX.
b Notes
BSTEREO
Outputs in stereo.
• This function is available when the CH1 and
CH2 switches are set to AUTO and the INPUT1
and INPUT2 switches are both set to MIC or
MONO
Outputs in monaural.
x AUDIO MANUAL GAIN
You can select either linked or separate
audio level control of CH1 and CH2 when
using an external microphone (sold
separately).
INT MIC SET
x INT MIC SENS
You can set recording sensitivity of the
internal microphone.
BSEPARATE
Separately controls the audio levels of
CH1 and CH2. Sound inputs from CH1
and CH2 will be recorded as separate
sound.
BNORMAL
Sensitivity that is normally used in
professional recordings.
HIGH
Sensitivity that is normally used in
consumer recordings.
Continued ,
75
Press the MENU button t select
(AUDIO SET) with the SEL/PUSH EXEC dial.
a highly sensitive microphone or recording loud
sound, set this to the minus side. When using a
less sensitive microphone or recording quiet
sound, set it to the plus side.
• When recording loud sound, the sound may be
distorted at either the input point or the
recording point. If it is distorted at the input
point, adjust the sound using the INPUT TRIM
function. If it is distorted at the recording point,
lower the total volume level manually.
• If you set INPUT TRIM too far to the minus
side, the microphone volume becomes too low,
resulting in a poor signal to noise ratio.
• Test the effect of the [AUDIO SET] function
according to the microphone used or the sound
field of the recording site before actual
recording.
LINKED (
Controls the audio level of CH1 linked
with that of CH2. Sound inputs from CH1
and CH2 will be recorded as a set of sound
such as stereo sound.
status check screen.
)
appears on the
M
b Notes
• This function is available when the CH1 and
CH2 switches are set to MAN and the INPUT1
and INPUT2 switches are both set to MIC or
• When you select [LINKED], you can adjust the
volume with the AUDIO LEVEL dial of CH1
x INPUT1 TRIM
You can adjust the input signal level from
INPUT1.
You can select from [-18dB], [-12dB],
[-6dB], [0dB], [+6dB] and [+12dB]. The
default setting is [0dB].
b Notes
• The setting is not effective when you set the
INPUT1 switch to LINE.
x INPUT1 WIND
BOFF
Disables wind noise reduction.
ON
Enables wind noise reduction.
appears on the status check screen.
b Notes
• The setting is not effective when you set the
INPUT1 switch to LINE.
x INPUT2 TRIM
x INPUT2 WIND
You can set INPUT2 in the same way as
INPUT1.
z Tips
• -48 dBu is set as 0 dB in your camcorder.
• Set INPUT TRIM to [0dB] for a microphone
(sold separately).
• The INPUT TRIM function adjusts the input
level from an external microphone. When using
76
(DISPLAY SET)
menu
Display settings of the display and the
DISPLAY OUTPUT, etc.)
x COLOR
You can select peaking color from
[WHITE], [RED] and [YELLOW]. The
default setting is [WHITE].
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
x LEVEL
You can select a peaking sensitivity from
[HIGH], [MIDDLE] and [LOW]. The
default setting is [MIDDLE].
b Notes
Press the MENU button t select
(DISPLAY SET) with the SEL/PUSH
EXEC dial.
• The enhanced outlines will not be recorded on
the memory card.
z Tips
• You can focus more easily using this function in
combination with the expanded focus function
• You can assign an ASSIGN button to work as
ZEBRA
You can display a zebra pattern as a guide
for adjusting brightness.
x ON/OFF
When you select [ON],
and the
MARKER
brightness level appear on the screen. The
zebra pattern will not be recorded with the
image. The default setting is [OFF].
x ON/OFF
When you select [ON], you can display
markers. The default setting is [OFF].
Markers will not be recorded on the
memory card.
x LEVEL
You can select the brightness level between
70 and 100 or 100+. The default setting is
[70].
x CENTER
When you select [ON], you can display a
marker at the center of the screen. The
default setting is [ON].
z Tips
• The zebra pattern is a strip pattern displayed
over a part of an image on the screen when the
part is higher than the preset brightness level.
• You can assign an ASSIGN button to work as
x GUIDEFRAME
When you select [ON], you can display
frame markers that help you to check
horizontal and vertical positions of a
subject. The default setting is [OFF].
PEAKING
x ON/OFF
When you select [ON],
appears
and you can display an image on the screen
with its outlines enhanced. This function
helps you to adjust the focus. The default
setting is [OFF].
b Notes
• Only the time code is output to an external
device via external output jacks when
[MARKER] is set to [ON], even if [DISPLAY
OUTPUT] is set to [ALL OUTPUT].
Continued ,
77
Press the MENU button t select
(DISPLAY SET) with the SEL/PUSH EXEC dial.
• You cannot display markers under following
conditions:
– [EXPANDED FOCUS]
z Tips
• The settings appear on the screen during the
manual adjustment regardless of the settings of
this function.
– During [SMOOTH SLOW REC]
– When the current time is displayed after the
power is turned on
•
indicates that the settings are automatically
adjusted values.
• You can display markers only on the LCD panel
and viewfinder. You cannot display them on an
external device.
• The displayed settings are different from the
settings that will be displayed when you press
z Tips
AUDIO LEVEL DISPLAY
• You can display all types of markers at the same
time.
When you set this function to [ON], you
can display the audio level meter on the
screen. The default setting is [ON].
• You can obtain a balanced composition by
positioning the subject at the cross points of the
guideframe marker.
• You can assign an ASSIGN button to work as
EXPANDED FOCUS TYPE
You can set a type of the expanded focus
display.
BTYPE 1
Simply enlarges images.
Audio level meter
TYPE 2
LCD BRIGHT
Enlarges and shows images in black and
white.
You can adjust the brightness of the LCD
screen. Changes in the LCD brightness will
not affect the brightness of recording
images.
CAMERA DATA DISPLAY
When you set this function to [ON], you
can constantly display the iris, gain and
shutter speed settings on the screen. The
default setting is [OFF].
z Tips
LCD COLOR
You can adjust the color level of the LCD
panel. Changes in the LCD color level will
not affect the color level of recording
images.
LCD BACKLIGHT LEVEL
Iris value
Shutter speed value
Gain value
You can adjust the backlight level of the
LCD screen.
78
BNORMAL
Standard brightness.
BON
Always displays the remaining recording
time available for movies.
BRIGHT
Brightens the LCD screen.
DISPLAY OUTPUT
b Notes
You can select where to output the display
information, such as time code.
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
BLCD PANEL
Outputs the information to the LCD screen
and viewfinder.
ALL OUTPUT
VF BACKLIGHT
Outputs the information to the LCD
screen, viewfinder, HDMI output,
component output and video output.
You can adjust the brightness of the
viewfinder.
BNORMAL
b Notes
Standard brightness.
• Only the time code is output when [MARKER]
is set to [ON] and a marker is displayed on the
screen.
BRIGHT
Brightens the viewfinder screen.
b Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
VF POWERMODE
BAUTO
Turns on the viewfinder while you close
the LCD panel or record in mirror mode.
ON
Always turns on the viewfinder.
REMAINING
AUTO
Displays the remaining recording time
available for movies when you re-enter
movie recording mode or switch to
[SMOOTH SLOW REC]. When the
remaining time is 5 minutes or more, the
display goes off after 8 seconds.
79
(OTHERS) menu
Settings while recording or other basic
BEEP
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
OFF
Cancels the melody.
BON
Activates a melody when you start/stop
Press the MENU button t select
(OTHERS) with the SEL/PUSH EXEC
dial.
recording, or when you are warned with
warning indicators, etc.
REC LAMP (Recording lamp)
ASSIGN BUTTON
When you set this function to [OFF], you
can turn off the camera recording lamp. The
default setting is [ON].
CLOCK SET
z Tips
• You can assign this function to an ASSIGN
AREA SET
REMOTE CONTROL
You can adjust a time difference without
stopping the clock. When you use your
camcorder abroad, you can adjust the clock
to the local time.
When you set this function to [ON], you
can use the supplied Wireless Remote
[ON].
z Tips
DST SET/SUMMERTIME
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another
remote control unit.
You can change this setting without
stopping the clock. Set to [ON] to move the
time forward 1 hour.
CALIBRATION
BOFF
Does not set the summertime.
ON
Sets the summertime.
LANGUAGE
You can select the language to be used on
the LCD screen.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) in case that you cannot find
your native tongue among the options.
80
CSoannvecitinnggwithima Caomgpuetesr with a computer
Preparing a computer (Windows)
Hard disk
You can perform following operations
using “Content Management Utility.”
Disk volume required for installation:
Approximately 100 MB
Only the NTFS or exFAT file system can be
used for importing videos or registering
them for viewing.
• Importing images to a computer
• Viewing imported images
To save movies using a computer, install
the software from the supplied CD-ROM
“Content Management Utility” beforehand.
Use commercially available software to edit
images or create discs.
Display
Minimum 1,024 × 768 dots
Others
USB port (this must be provided as standard,
High-Speed USB (USB 2.0 compatible))
(CD-ROM drive is necessary for
installation)
Step 1 Checking the computer system
OS*1
Microsoft Windows XP SP3*2/Windows
Vista SP2*3/Windows 7
*1 Standard installation is required. Operation is
not assured if the OS has been upgraded or in
a multi-boot environment.
CPU
Use an Intel Core 2 Duo 2.20 GHz CPU or
faster to play back videos with high
definition image quality (HD) in the FX
mode.
Videos with high definition image quality
(HD) recorded in other than the FX mode
may be played back with a slower CPU.
Depending on the performance of your video
card, videos with high definition image
quality (HD) recorded using the FX mode
may be played back with a slower CPU than
that recommended above.
For the following operations, an Intel
Pentium III 1GHz or faster is necessary.
– Importing movies to the computer
– Processing with standard definition image
quality (SD)
*2 64-bit editions and Starter (Edition) are not
supported.
*3 Starter (Edition) is not supported.
b Notes
• Operation with all computer environments is not
assured.
• The supplied software “Content Management
Utility” is not supported by Macintosh
computers.
Step 2 Installing the supplied software
“Content Management Utility”
Install “Content Management Utility”
before connecting your camcorder to a
computer.
1 Confirm that your camcorder is not
Memory
connected to the computer.
For Windows XP: 512 MB or more (1 GB or
more is recommended.) However, 256 MB
or more is sufficient for processing only the
movies with standard definition image
quality (SD).
2 Turn on the computer.
• Log on as an Administrator for installation.
• Close all applications running on the
computer before installing the software.
3 Place the supplied CD-ROM “Content
Management Utility” in the disc drive of
your computer.
For Windows Vista/Windows 7: 1 GB or
more
The installation screen appears.
Continued ,
81
Saving images with a computer (Continued)
• If the screen does not appear, click [Start]
t [Computer] (in Windows XP, [My
Computer]), then double-click
When the installation is completed, the
following icon will appear, depending
on the selection in step 8.
[SONYCMU(E:)] (CD-ROM).
4 Select the language for the application
to be installed, then click [OK].
5 When the install wizard screen appears,
click [Next].
6 Confirm the license agreement, and if
qd Remove the CD-ROM from the
you accept the terms, click [Next].
computer.
7 Select the drive or folder to install the
application, then click [Next].
To disconnect your camcorder from
the computer
8 Select the option to create the desk-top
shortcut, then click [Next].
1 Click the
icon at the bottom right of
9 Turn on your camcorder, then connect
the camcorder to the computer using the
supplied USB cable.
the desktop of the computer t [Safely
remove USB Mass Storage Device-
Drive].
2 Touch [END] t [YES] on the
camcorder screen.
3 Disconnect the USB cable.
The [USB SELECT] screen appears on
the camcorder screen automatically.
0 Touch [
] or [
] on the camcorder
screen.
• If the [USB SELECT] screen does not
appear, press the MODE button, then touch
[MANAGE MEDIA] t [USB
CONNECT].
qa Click [Next].
qs Follow the on-screen instructions to
install the software.
• Restart the computer if required to complete
the installation.
82
Troubleshooting
Troubleshooting
If you run into any problems using your camcorder, follow the flow chart below.
2 Disconnect the power source, reconnect the power source after about 1 minute and turn
on your camcorder.
This operation will reset the date, time and area settings.
4 Consult your Sony dealer or local authorized Sony service facility.
Power sources/LCD screen/Wireless Remote Commander
The power does not turn on or abruptly turns off.
The camcorder does not operate even when the power is set to on.
• Disconnect the AC Adaptor from the wall outlet (wall socket) or remove the battery pack,
then reconnect it after about 1 minute.
The camcorder gets warm.
• The camcorder may get warmer while you use it. This is not a malfunction.
The CHG lamp does not light up during charging the battery pack.
• Connect the power plug to the wall outlet (wall socket) correctly.
Continued ,
83
Troubleshooting (Continued)
The CHG lamp blinks during charging the battery pack.
pack may be damaged. Disconnect the power plug and consult your Sony dealer.
• If the temperature of the battery pack is too high or too low, the battery pack may not be
charged and the CHG lamp may blink slowly.
The remaining battery time indicator does not indicate the correct time.
• Ambient temperature is too high or too low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
• The indicated time may not be correct in certain circumstances. For example, when you open
or close the LCD panel, it takes about 1 minute to display the correct remaining battery time.
The battery pack discharges too quickly.
• Ambient temperature is too high or low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
The image remains on the LCD screen.
• This occurs if you disconnect the DC plug or remove the battery pack without turning off the
power first. This is not a malfunction.
The image in the viewfinder is not clear.
The image in the viewfinder has disappeared.
• If you set [VF POWERMODE] to [AUTO], the finder light remains off while the LCD panel
The supplied Wireless Remote Commander does not function.
• Set [REMOTE CONTROL] to [ON] (p. 80).
• Remove any obstructions between the Wireless Remote Commander and the remote sensor
of the camcorder.
• Keep strong light sources, such as sunlight or overhead lighting, away from the remote
sensor, otherwise the Wireless Remote Commander may not function properly.
• Insert a fresh battery in the compartment with its +/– terminals matching those of the
84
Another video device malfunctions when you use the supplied Wireless
Remote Commander.
• Select a commander mode other than DVD2 for your video device.
• Cover the sensor of your video device with black paper.
When a device is connected to the REMOTE jack, the camcorder or the device
does not operate properly.
• The connected device may react slowly to some operations, such as zooming.
Memory card
The remaining movie recording indicator is not displayed.
• Set [
REMAINING] to [ON] to always display the remaining movie recording indicator
The camcorder does not operate with the memory card inserted.
The data file name is incorrect, or flashing.
• The file is damaged.
The recording media indicator is flashing.
Images on the memory card cannot be deleted.
• You can select no more than 100 images to be deleted on the edit screen.
Continued ,
85
Troubleshooting (Continued)
Recording
The recording does not start when you press the record button.
• There is no empty space on the memory card. Replace the memory card with new one, delete
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. Turn off your camcorder and leave it
for a while in a warm place.
The handle zoom does not work.
The access lamp remains lit even after recording was stopped.
• Your camcorder is recording the scene you have just shot on the memory card.
The imaging field looks different.
• The imaging field may look different depending on the condition of your camcorder. This is
not a malfunction.
The actual recording time for movies is less than the expected recording time
of the memory card.
• Depending on the recording conditions, the time available for recording may be shorter, for
The camcorder does not keep the setting changes.
• The LCD backlight setting and the EXPANDED FOCUS setting are not stored.
• You disconnected the power sources when the POWER switch was set to ON. Before
disconnecting the battery or the AC Adaptor, set the POWER switch to OFF and make sure
that the access lamp is turned off.
There is a time difference between the point when the record button is pressed
and the point that the recording movie is started or stopped actually.
• On your camcorder, there may be a slight time difference between the point where you press
the record button and the actual point that recording movie starts/stops. This is not a
malfunction.
86
The aspect ratio (16:9 (wide)/4:3) cannot be changed.
• The aspect ratio of high definition image quality (HD) movies is 16:9 (wide).
Automatic focus does not function.
[This function is currently not available.] appears when selecting a function on
the MODE menu.
• Try again after finishing all tasks currently selected on the MODE menu.
Menu items are grayed out or do not work.
• You cannot select grayed out display items in the current recording/playback situation.
• There are some functions you cannot activate simultaneously. The following list shows
examples of unworkable combinations of functions and menu items.
Cannot use
Situation
[BACK LIGHT],
All of iris, gain, and shutter speed are set manually.
[SPOTLIGHT], [ON/
OFF] of [AE SHIFT]
[FADER]
The camcorder is unable to record images.
The memory card has less than 1 minute of remaining capacity.
[COLOR BAR] is set to [ON].
[ZEBRA], [PEAKING],
[CAMERA DATA
DISPLAY]
[COLOR BAR] is set to [ON].
[ON/OFF] of [MARKER] [EXPANDED FOCUS] is set to [ON].
While the date and time are displayed when the power is turned
on.
[LCD BACKLIGHT
LEVEL],
AC power source is being used.
[VF BACKLIGHT]
[AREA SET], [DST
Date and time are not set.
SET]/[SUMMERTIME]
[COLOR BAR]
Movies are being recorded.
[FADER] is selected.
[EXPANDED FOCUS] is set to [ON].
Iris, gain, shutter speed, or white balance cannot be adjusted manually.
• Set the AUTO/MANUAL switch to MANUAL.
Tiny spots in white, red, blue, or green appear on the screen.
Continued ,
87
Troubleshooting (Continued)
The subjects passing by the frame very fast appear crooked.
• This is called the focal plane phenomenon. This is not a malfunction. Because of the way that
the image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.
The LCD screen is too bright, and the subject cannot be seen.
• Set [BACK LIGHT] to [OFF].
The LCD screen is too dark, and the subject cannot be seen.
Horizontal stripes appear on the image.
• This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury
The image appears divided horizontally.
• This occurs when you light the subject using a flash. This can be avoided by using a shutter
Black bands appear when you record a TV screen or computer screen.
Fine patterns flicker, diagonal lines look jagged.
The time code is not recorded in sequence.
• The time code may not be recorded sequentially if you change the settings with [REC
FORMAT].
88
Playback
The desired images cannot be found. Images cannot be played back.
• Select the memory card and image quality of the image you want to play back on the
VISUAL INDEX screen (p. 45).
• Image data cannot be played back if you have modified file names or folders, or have edited
the data on a computer (When viewing still images, the file name flashes). This is not a
• Images recorded on other devices may not be played back, or displayed in incorrect size. This
is not a malfunction.
The data file name is displayed incorrectly, or flashing.
• The file is damaged.
• Only the file name is displayed, if the folder structure does not conform to the universal
standard.
No sound or only a low sound is heard.
• Movies recorded using [SMOOTH SLOW REC] do not have sounds.
“---” is displayed on the screen.
• The memory card you are playing was recorded without setting the date and time.
• Bars will be displayed for the camera data of the movies recorded with [SMOOTH SLOW
REC] or [COLOR BAR] set to [ON].
• Bars will be displayed for the exposure correction value and flash information of the still
images created with [PHOTO CAPTURE].
appears on the LCD screen.
• This appears when you play back movies recorded with 5.1ch surround sound. 5.1ch
surround sound is down-mixed to 2ch stereo and played back on your camcorder.
Continued ,
89
Troubleshooting (Continued)
Connecting to TV
Neither image nor sound is played back on the TV connected with the
component video cable.
• When you are using the component video cable, make sure that you connect the red and white
Neither image nor sound is played back on the TV connected with the HDMI
cable.
• Pictures are not output from the HDMI OUT jack, if copyright protection signals are recorded
in the pictures.
• Signals are not output from the HDMI OUT jack when the USB jack is connected.
Neither image nor sound is played back on the TV, projector, or AV amplifier
connected with the HDMI cable.
• If you cannot view images or hear sound on the TV, projector, or AV amplifier connected
with the HDMI cable, try disconnecting and connecting the HDMI cable, or turn on your
camcorder again.
The image appears distorted on the 4:3 TV.
• This happens when viewing a movie recorded in 16:9 (wide) mode on a 4:3 TV. Select [REC/
OUT SET] t [VIDEO OUT] t [TV TYPE] t the appropriate down conversion type
Black zone appears at top and bottom of a 4:3 TV screen.
• This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. This is
not a malfunction.
90
Dubbing/Editing/Connecting to other devices
Time code and other information appear on the display of the connected
device.
• Set [DISPLAY OUTPUT] to [LCD PANEL] while connected with the A/V connecting cable
Dubbing cannot be done correctly using the A/V connecting cable.
• The A/V connecting cable is not connected properly. Make sure that the A/V connecting
cable is connected to the input jack of the other device for dubbing images from your
camcorder.
Sound cannot be added to the memory card after recording.
• You cannot add sound to the memory card after recording on your camcorder.
Dubbing cannot be done correctly using the HDMI cable.
• You cannot dub movies using the HDMI cable.
Connecting to a computer
The computer does not recognize the camcorder.
• Disconnect the cable from the computer, then connect it again securely.
• Disconnect the cable from the computer, restart the computer, then connect the computer to
your camcorder correctly.
Movies cannot be viewed or copied to a computer.
• Disconnect the cable from the computer, then connect it again.
• You need to install the supplied “Content Management Utility” to copy movies from your
The computer freezes.
• Disconnect the cable from your computer and camcorder. Reboot your computer, and
91
Warning indicators and messages
Self-diagnosis display/Warning
indicators
E (Battery level warning)
• The battery pack is nearly used up.
• Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 5 to 10 minutes
remaining.
When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
You can fix some problems associated with
the symptoms yourself. If the problem
persists even after you have tried a couple
of times, contact your Sony dealer or local
authorized Sony service facility.
(Warning indicator pertaining
to battery pack temperature)
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
C:04:ss
• The battery pack is not an
“InfoLITHIUM” battery pack. Use an
(Warning indicator
pertaining to memory cards)
• Connect the DC plug of the AC
Adaptor to the DC IN jack of the
Slow flashing
• Free spaces for recording images are
running out. For the type of memory
cards you can use with your camcorder,
C:06:ss
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
Fast flashing
• There are not enough free spaces for
recording images. Delete unnecessary
C:13:ss
• Remove the “Memory Stick PRO Duo”
media. After installing them again,
operate your camcorder.
• The image database file may be
C:32:ss
• Remove the power source. Reconnect it
and operate your camcorder again.
(Warning indicators
pertaining to memory card
formatting)
E:20:ss / E:61:ss / E:62:ss /
E:92:ss / E:94:ss
• The memory card is damaged.
• The memory card is not formatted
(Warning indicator
pertaining to incompatible memory
card)
• Incompatible memory card is inserted
(p. 9).
92
previously recorded images on the
memory card cannot be played back on
your camcorder (Image files are not
damaged). If you execute [ REPAIR
IMAGE DB FILE] after creating new
management information, playing back
the previously recorded images may
become possible. If it does not work,
copy the image file to your computer
using the supplied software.
-
- (Warning indicator
pertaining to the write-protect of the
memory card)
• Access to the memory card was
restricted on another device.
melody when the warning indicators appear on
the screen.
There is no HD movie management
information. Create new
information?
Warning messages
If messages appear on the screen, follow the
instructions.
• As there is no management information
of high definition image quality (HD)
movies, the camcorder does not record
or play back movies. Touch [YES] to
create management information. You
will be able to record or play back high
definition image quality (HD) movies.
Memory card
Data error.
• An error occurred during reading or
writing the memory card. If the
message appears after you repeat a few
times, the memory card could be
damaged. Try with another memory
card.
• It is possible to record standard
definition image quality (SD) movies.
Inconsistencies found in Image
Database File. Cannot record or play
HD movies. Do you want to repair the
Image Database File?
Buffer overflow
• Writing data onto the media of the
camcorder has failed. Use the memory
card recommended for your camcorder
(p. 9).
The Image Database File is
damaged. Movies cannot be
recorded or played. Do you want to
repair the Image Database File?
Inconsistencies found in Image
Database File. Movies cannot be
recorded or played. Do you want to
repair the Image Database File?
There is no Image Database File.
Movies cannot be recorded or
played. Create a new file?
• There is no image database file. Touch
[YES] to create a new image database
file.
• As the image database file is damaged,
or has inconsistencies, the camcorder
does not record movies. Touch [YES]
to repair the image database file.
HD movie management information
is damaged. Create new
information?
Recovering data.
• Your camcorder tries to recover data
automatically if the data writing was
not performed properly.
• The management information of high
definition image quality (HD) movies
is damaged. Touch [YES] to create new
management information. The
Continued ,
93
Warning indicators and messages (Continued)
• Reinsert the memory card, and follow
the instructions on the LCD screen.
Cannot recover data.
• Writing data onto the media of the
camcorder has failed. Attempts were
made to recover the data, but they were
unsuccessful.
Others
No further selection is possible.
Reinsert memory card A.
Reinsert memory card B.
• You can select only 100 images at one
time for:
– Deleting movies/still images
– Protecting movies/still images, or
releasing the protection
• Reinsert the memory card a few times.
If even then the message appears, the
memory card could be damaged. Try
with another memory card.
– Editing the Playlist
Data protected.
A format error has occurred in
memory card A.
• You tried to delete protected data.
Release the protection of the data.
A format error has occurred in
memory card B.
• Check the format, then format the
memory card with your camcorder if
Memory card A may not record or
play movies normally.
Memory card B may not record or
play movies normally.
• Use the memory card recommended for
Memory card A may not record or
play normally.
Memory card B may not record or
play normally.
• Use the memory card recommended for
Memory card A has been pulled out
during writing. Data could be
corrupted.
Memory card B has been pulled out
during writing. Data could be
corrupted.
94
Additional Information
Recording time of movies
Playing time
Approximate time available when you use a
fully charged battery pack.
(unit: minute)
Estimated time of recording and
playback with each battery pack
“HD” stands for high definition image
quality, and “SD” stands for standard image
quality.
Battery pack
LCD panel opened*
Image quality HD
SD
Recording time
Approximate time available when you use a
fully charged battery pack.
(unit: minute)
NP-F570
NP-F770
NP-F970
225
460
690
270
550
830
* When the LCD backlight turns on
Continuous
recording
time
Typical
recording
time
Battery pack
Estimated recording time of
movies
Image quality
HD
SD
HD
SD
85
85
NP-F570
130 150
130 150
80
80
x High definition image quality (HD)
(unit: minute)
NP-F770
NP-F970
285 320 170 185
285 320 170 185
AVCHD AVCHD AVCHD AVCHD
24 M
(FX)
17 M
(FH)
9 M
5 M
425 480 245 285
425 480 245 285
(HQ)
(LP)
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
5
6
10
20
(5)
(6)
(9)
(15)
b Notes
• Top: When the LCD backlight is on
Bottom: When recording with the viewfinder
10
10
25
40
(10)
(10)
(15)
(35)
• Recording format
HD image quality: FX
SD image quality: HQ
• Typical recording time shows the time when
you repeat recording start/stop, zooming, and so
on.
• Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
20
25
50
90
(20)
(25)
(40)
(75)
45
55
105
185
(45)
(55)
(80)
(155)
90
115
215
375
(90)
(115)
(165)
(315)
180
235
435
750
(180)
(235)
(335)
(630)
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
Continued ,
95
Recording time of movies (Continued)
x Standard definition image quality (SD)
(unit: minute)
SD 9 M (HQ)
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
10 (10)
25 (25)
55 (50)
115 (105)
235 (210)
475 (425)
b Notes
• The recordable time may vary depending on the
recording and subject conditions, [REC
• The number in ( ) is the minimum recordable
time.
z Tips
• You can record movies of a maximum of 3,999
scenes with high definition image quality (HD),
and 9,999 scenes with standard definition image
quality (SD).
• The maximum continuous recording time of
movies is approximately 13 hours.
• Your camcorder uses the VBR (Variable Bit
Rate) format to automatically adjust image
quality to suit the recording scene. This
technology causes fluctuations in the recording
time of the media. Movies containing quickly
moving and complex images are recorded at a
higher bit-rate, and this reduces the overall
recording time.
• Bit-rate (movie + audio, etc.), number of pixels,
and aspect ratio of each recording mode of
movies are as follows.
– High definition image quality (HD)
FX: max. 24 Mbps 1920 × 1080/16:9
FH: approx. 17 Mbps (ave.) 1920 × 1080/16:9
HQ: approx. 9 Mbps (ave.) 1440 × 1080/16:9
LP: approx. 5 Mbps (ave.) 1440 × 1080/16:9
– Standard definition image quality (SD)
HQ: approx. 9 Mbps (ave.) 720 × 480/16:9,
4:3
• Number of pixels and aspect ratio of still images
(Still images are created from movies.)
1920 × 1080 dots/16:9
640 × 360 dots/16:9
640 × 480 dots/4:3
96
Using your camcorder abroad
Power supply
System
Used in
You can use your camcorder in any
country/region using the AC Adaptor
supplied with your camcorder within the
AC 100 V to 240 V, 50 Hz/60 Hz range.
PAL
Australia, Austria, Belgium,
China, Czech Republic,
Denmark, Finland, Germany,
Holland, Hong Kong, Hungary,
Italy, Kuwait, Malaysia,
Viewing high definition image quality
(HD) movies
New Zealand, Norway, Poland,
Portugal, Singapore,
Slovak Republic, Spain,
In countries/regions where 1080/60i is
supported, you can view the movies with
the same high definition image quality
(HD) as that of the recorded movies.
You need an NTSC-system-based and
1080/60i compatible TV (or monitor) with
component and AUDIO/VIDEO input
jacks. The component video cable
(supplied) or an HDMI cable (sold
separately) must be connected.
Sweden, Switzerland, Thailand,
United Kingdom, etc.
PAL - M Brazil
PAL - N Argentina, Paraguay, Uruguay.
SECAM Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine,
etc.
Simple setting of the clock by time
difference
When you are abroad, you can easily adjust
the clock to the local time by setting the
time difference. Select [AREA SET], then
Viewing standard definition image
quality (SD) movies
To view standard definition image quality
(SD) movies, you need an NTSC-system-
based TV with AUDIO/VIDEO input jacks.
An A/V connecting cable must be
connected.
On TV color systems
Your camcorder is NTSC system, so its
picture can only be viewed on an NTSC-
system TV with AUDIO/VIDEO input
jacks.
System
Used in
NTSC
Bahama Islands, Bolivia,
Canada, Central America, Chile,
Colombia, Ecuador, Guyana,
Jamaica, Japan, Korea, Mexico,
Peru, Surinam, Taiwan,
the Philippines, the U.S.A.,
Venezuela, etc.
97
File/folder structure on the memory card
The file/folder structure is shown below. You do not usually need to acknowledge the file/
folder structure, when recording/playing back movies and still images on the camcorder.
* “Memory Stick PRO Duo” media
**SD memory card, SDHC memory card
9999, another folder is created to store
new still image files.
A Image management files
The folder name goes up: [101MSDCF]
When you delete the files, you cannot
record/play back the images correctly.
The files are defaulted as hidden files
and not usually displayed.
t [102MSDCF]
• By pressing the MODE button, then selecting
[MANAGE MEDIA] t [USB CONNECT] t
[
]/[
], you can access the memory card
from the computer through USB connection.
B HD movie management information
folder
• Do not modify the files or folders on the
camcorder from the computer. The image files
may be destroyed or may not be played back.
• Operation is not guaranteed, if you perform the
above operation.
• When you delete image files, follow the steps on
page 61. Do not delete the image files on the
camcorder directly from the computer.
• Do not format the memory card using a
computer. The camcorder may not operate
correctly.
• Do not copy the files on the memory card from
the computer. Operation is not guaranteed.
• Use the supplied application software “Content
Management Utility” to input data from the
memory card to a computer.
This folder contains recording data of
high definition image quality (HD)
movies. Do not try to open this folder or
access the contents of this folder from a
computer. Doing so might damage
image files, or prevent image files from
being played back.
C SD movie files (MPEG-2 files)
The extension of the files is “.MPG”.
The maximum size is 2 GB. When the
capacity of a file exceeds 2 GB, the file
becomes divided.
The file numbers go up automatically.
When the capacity of a file number
exceeds 9999, another folder is created
to record new movie files. The folder
name goes up: [101PNV01] t
[102PNV01]
D Still image files (JPEG files)
The extension of the files is “.JPG”. The
file numbers go up automatically. When
the capacity of a file number exceeds
98
Maintenance and precautions
About the AVCHD format
What is the AVCHD format?
The AVCHD format is a high definition
digital video camera format used to record a
high definition (HD) signal, using efficient
data compression coding technology. The
MPEG-4 AVC/H.264 format is adopted to
compress video data, and the Dolby Digital
or Linear PCM system is used to compress
audio data.
About the “Memory Stick”
media
“Memory Stick” media are compact,
portable IC recording media with a large
data capacity.
You can use only “Memory Stick Duo”
media, which are about the half size of
standard “Memory Stick” media, with your
camcorder.
However, we do not guarantee the
operation of all types of “Memory Stick
Duo” media on your camcorder.
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format.
Recording
Types of “Memory Stick” media
/Playback
• Because the AVCHD format uses a data
compression system, images may be distorted in
scenes where the image, angle, or brightness
changes drastically. This is not a malfunction.
“Memory Stick Duo” media
(with MagicGate)
_
“Memory Stick PRO Duo”
media
a
a*
Recording and playback on your
camcorder
“Memory Stick PRO-HG Duo”
media
Based on the AVCHD format, your
camcorder records with the high definition
image quality (HD). In addition to high
definition image quality (HD), your
camcorder is capable of recording a
standard definition (SD) signal in the
conventional MPEG-2 format.
* This product does not support 8-bit parallel data
transfer but it supports 4-bit parallel data
transfer the same as with “Memory Stick PRO
Duo” media.
• This product cannot record or play data that uses
“MagicGate” technology. “MagicGate” is a
copyright protection technology that records and
transfers the contents in an encrypted format.
• “Memory Stick PRO Duo” media formatted by
a computer (Windows OS/Mac OS) do not have
guaranteed compatibility with your camcorder.
• Data read/write speed may vary depending on
the combination of the “Memory Stick PRO
Duo” media and “Memory Stick PRO Duo”
media compliant product you use.
• Damaged or lost image data will not be
compensated for, and may occur in the
following cases:
– If you eject the “Memory Stick PRO Duo”
media, turn the power off on your camcorder,
or remove the battery pack for replacement
while your camcorder is reading or writing
image files on the “Memory Stick PRO Duo”
media (while the access lamp is lit or
flashing).
Video signal*: MPEG-4 AVC/H.264
1920 ×1080/60i, 1440 × 1080/60i
Audio signal: Dolby Digital 2ch
Recording media: memory card
* Data recorded in AVCHD format other than the
above mentioned cannot be played back on your
camcorder.
• 1080i specification
A high definition specification which utilizes
1,080 effective scanning lines and the interlace
system.
– If you use the “Memory Stick PRO Duo”
media near magnets or magnetic fields.
Continued ,
99
Maintenance and precautions (Continued)
• It is recommended to make a back-up of
important data on the hard disk of a computer.
correct direction. Note that improper use may
damage the device.
• Be careful not to apply excessive force when
writing on a memo area on “Memory Stick PRO
Duo” media.
• Do not attach a label or the like on “Memory
Stick PRO Duo” media or a “Memory Stick
Duo” media adaptor.
• Do not insert “Memory Stick Duo” media
adaptor without “Memory Stick PRO Duo”
media attached into a “Memory Stick” media
compliant device. Doing so may result in
malfunctions of the unit.
On image data compatibility
• When you carry or store a “Memory Stick PRO
Duo” media, put it in its case.
• Do not touch, or allow metallic objects to come
into contact with the terminals.
• Do not bend, drop or apply strong force to the
“Memory Stick PRO Duo” media.
• Do not disassemble or modify the “Memory
Stick PRO Duo” media.
• Do not let the “Memory Stick PRO Duo” media
get wet.
• Be careful to keep “Memory Stick PRO Duo”
media out of the reach of small children. There
is danger that a child might swallow it.
• Do not insert anything other than “Memory
Stick PRO Duo” media into the “Memory Stick
Duo” media slot. Doing so may cause a
malfunction.
• Do not use or keep the “Memory Stick PRO
Duo” media in the following locations:
• Image data files recorded on a “Memory Stick
PRO Duo” media by your camcorder conform
to the “Design rule for Camera File system”
universal standard established by the JEITA
(Japan Electronics and Information Technology
Industries Association).
• On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900 or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
• If you cannot use “Memory Stick PRO Duo”
media that has been used with another device,
formatting erases all information on the
“Memory Stick PRO Duo” media.
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
– When playing back image data recorded with
other devices.
– Places subject to extremely high temperature,
such as a car parked outside in the summer.
– Places under direct sunlight.
– Places with extremely high humidity or
subject to corrosive gases.
About the “InfoLITHIUM”
battery pack
x On the “Memory Stick Duo” media
adaptor
• When using a “Memory Stick PRO Duo” media
with a “Memory Stick” media compliant device,
make sure to insert the “Memory Stick PRO
Duo” media into a “Memory Stick Duo” media
adaptor.
This unit is compatible with an
“InfoLITHIUM” battery pack (L series).
Your camcorder operates only with an
“InfoLITHIUM” battery pack.
“InfoLITHIUM” L series battery packs
• When inserting “Memory Stick PRO Duo”
media into a “Memory Stick Duo” media
adaptor, make sure the “Memory Stick PRO
Duo” media is inserted facing in the correct
direction, then insert it all the way in. Note that
improper use may cause a malfunction.
have the
mark.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
• When using “Memory Stick PRO Duo” media
that is inserted into a “Memory Stick Duo”
media adaptor with a “Memory Stick” media
compliant device, make sure the “Memory Stick
PRO Duo” media is inserted into the “Memory
Stick” media compliant device facing in the
camcorder and a supplied AC Adaptor.
100
The “InfoLITHIUM” battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
About the remaining battery time
indicator
• When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or
when the battery pack is frequently used. Use
the remaining battery time indication as a rough
guide only.
With an AC Adaptor, the remaining battery
time and charging time appear.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the charge lamp of the AC
Adaptor turns off. If you charge the battery pack
outside of this temperature range, you may not
be able to charge it efficiently.
• The E mark that indicates low battery flashes
even if there are still 5 to 10 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.
About storage of the battery pack
To use the battery pack effectively
• If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
• To discharge the battery pack on your
camcorder completely, leave your camcorder in
recording standby until the power goes off
• Battery pack performance decreases when the
ambient temperature is 10 °C (50 °F) or below,
and the length of time you can use the battery
pack becomes shorter. In that case, do one of the
following to use the battery pack for a longer
time.
– Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
– Use a large capacity battery pack: NP-F770/
F970 (sold separately).
• Frequent use of the LCD screen or a frequent
playback, fast forward or rewind operation
wears out the battery pack faster.
About battery life
• Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
We recommend using a large capacity battery
pack: NP-F770/F970 (sold separately).
• Each battery’s life is governed by storage,
operating and environmental conditions.
• Be sure to set the POWER switch to OFF when
not recording or playing back on your
camcorder. The battery pack is also consumed
when your camcorder is in recording standby or
playback pause.
About x.v.Color
• Have spare battery packs ready for two or three
times the expected recording time, and make
trial recordings before making the actual
recording.
• Do not expose the battery pack to water. The
battery pack is not water resistant.
• x.v.Color is a more familiar term for the
xvYCC standard proposed by Sony, and is
a trademark of Sony.
• xvYCC is an international standard for
color space in video. This standard can
express a wider color range than the
currently used broadcast standard.
Continued ,
101
Maintenance and precautions (Continued)
• Do not damage the power cord (mains lead)
such as by placing anything heavy on it.
• Keep metal contacts clean.
• Keep the Wireless Remote Commander and
button-type battery out of children’s reach. If
the battery is accidentally swallowed, consult a
doctor immediately.
About handling of your
camcorder
On use and care
• Do not use or store the camcorder and
accessories in the following locations.
• If the battery electrolytic liquid has leaked,
– Anywhere extremely hot or cold. Never leave
them exposed to temperatures above 60 °C
(140 °F), such as under direct sunlight, near
heaters or in a car parked in the sun. They
may malfunction or become deformed.
– consult your local authorized Sony service
facility.
– wash off any liquid that may have contacted
your skin.
– if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation. The
camcorder may not be able to record properly.
– Near AM receivers and video equipment.
Noise may occur.
x When not using your camcorder for a
long time
• Periodically turn on the camcorder and play
back images for about 3 minutes.
– On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
– Near windows or outdoors, where the LCD
screen, the viewfinder, or the lens may be
exposed to direct sunlight. This damages the
inside of the viewfinder or the LCD screen.
• Use up the battery pack completely before
storing it.
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
condense inside your camcorder and cause
a malfunction of your camcorder.
– Anywhere very humid.
• Operate your camcorder on DC 7.2 V (battery
pack) or DC 8.4 V (AC Adaptor).
x If moisture condensation has occurred
Leave your camcorder for about 1 hour without
turning it on.
• For DC or AC operation, use the accessories
recommended in these operating instructions.
• Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
• If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
• Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
x Note on moisture condensation
Moisture may condense when you bring your
camcorder from a cold place into a warm place (or
vice versa) or when you use your camcorder in a
humid place as shown below.
• When you bring your camcorder from a ski
slope into a place warmed up by a heating
device.
• When you bring your camcorder from an air
conditioned car or room into a hot place outside.
• When you use your camcorder after a squall or a
shower.
• Do not use a deformed or damaged battery pack.
• When you use your camcorder in a hot and
humid place.
• Keep the POWER switch setting to OFF when
you are not using your camcorder.
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
• When disconnecting the power cord (mains
lead), pull it by the plug and not the lead.
x How to avoid moisture condensation
When you bring your camcorder from a cold place
into a warm place, put your camcorder in a plastic
bag and seal it tightly. Remove the bag when the
102
air temperature inside the plastic bag has reached
the ambient temperature (after about 1 hour).
b Notes
• Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
LCD screen
• Do not exert excessive pressure on the LCD
screen, as it may cause damage.
On handling the casing
• If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
• While using your camcorder, the back of the
LCD screen may heat up. This is not a
malfunction.
• Avoid the following to avoid damage to the
finish.
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
x To clean the LCD screen
If fingerprints or dust make the LCD screen dirty,
it is recommended you use a soft cloth to clean it.
When you use the LCD Cleaning Kit (sold
separately), do not apply the cleaning liquid
directly to the LCD screen. Use cleaning paper
moistened with the liquid.
– Handling with above substances on your
hands.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
About care and storage of the lens
On adjustment of the touch panel
(CALIBRATION)
The buttons on the touch panel may not
work correctly. If this happens, follow the
procedure below. It is recommended that
you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor during the operation.
• Wipe the surface of the lens clean with a soft
cloth in the following instances:
– When there are fingerprints on the lens
surface.
– In hot or humid locations
– When the lens is exposed to salty air such as
at the seaside.
• Store in a well-ventilated location subject to
little dirt or dust.
• To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
1 Turn on the camcorder.
2 Press the MENU button t select
(OTHERS) t [CALIBRATION]
with the SEL/PUSH EXEC dial.
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF. The pre-installed
rechargeable battery is always charged
while your camcorder is connected to the
wall outlet (wall socket) via the AC
3 Touch “×” displayed on the screen with
the corner of memory card or the like 3
times.
Adaptor or while the battery pack is
• If you did not press the right spot, try the
calibration again.
• Touch [CANCEL] to cancel calibration.
attached. The rechargeable battery will be
fully discharged in about 3 months if you
do not use your camcorder at all without the
AC Adaptor connected or the battery pack
attached. Use your camcorder after
Continued ,
103
Maintenance and precautions (Continued)
charging the pre-installed rechargeable
battery.
2
Remove dust inside the eye piece
and viewfinder with a blower.
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
x Procedures
Connect your camcorder to a wall outlet
(wall socket) using the supplied AC
Adaptor, and leave it with the POWER
switch set to OFF for more than 24 hours.
Removing dust from inside the
viewfinder
1
Remove the eye piece of the
viewfinder.
Slide down the viewfinder release lever
and hold it at the position (1), then lift
the eye piece of the viewfinder as
indicated with the arrow in the
illustration (2).
104
Specifications
36.1 - 722 mm (1 7/16 - 28 1/2 in.)
(4:3)
F1.6 - 3.4
System
Video signal
NTSC color, EIA standards
HDTV 1080/60i
Video recording system
HD image quality: MPEG-4 AVC/
H.264 AVCHD
Filter diameter: 72 mm (2 7/8 in.)
Color temperature
[AUTO]
(one push) A/B
[INDOOR] (3 200K)
[OUTDOOR] (5 800K)
Minimum illumination
1.5 lx (lux) (Fixed Shutter Speed 1/30,
auto gain, auto iris) (F 1.6)
SD image quality: MPEG-2 PS
Audio recording system
Dolby Digital 2ch (48 kHz 16-bit)
Dolby Digital Stereo Creator employed
Still image recording system
DCF Ver. 2.0
* When [SET] of [STEADYSHOT] is set to
[STEADYSHOT] or [OFF]
Exif Ver. 2.21
MPF Baseline
Output connectors
VIDEO OUT jack
Recording media (movies/still images)
“Memory Stick PRO Duo” media
SD memory card, SDHC memory card
(Class 4, 6, 10)
Pin connector
1 Vp-p, 75 Ω (ohms) unbalanced, sync
negative
Viewfinder
AUDIO OUT jacks
Electric viewfinder (color)
Picture: 1.1 cm (0.45 type, aspect ratio
16:9)
Total dot number:
1 226 880 (approx. 852 × 3 [RGB] ×
480)
Pin connectors
-10 dBu (at load impedance 47 kΩ
(kilohms)), Output impedance with less
than 2.2 kΩ (kilohms)
(0 dBu = 0.775 Vrms)
COMPONENT OUT jack
Mini-D jack
Y: 1 Vp-p, 75 Ω (ohms)
PB/PR, CB/CR: 0.7 Vp-p, 75 Ω (ohms)
HDMI OUT jack
Image device
6.0 mm (1/3 type) 3CMOS sensor
Gross: Approx. 1 120 000 pixels
Effective (movie, 16:9):
Approx. 1 040 000 pixels*
Effective (movie, 4:3):
Approx. 780 000 pixels*
Lens
HDMI connector
i (headphones) jack
Stereo-minijack (Ø 3.5 mm)
G Lens
Input connectors
INPUT1/INPUT2 jacks
20 × (Optical), Approx. 30 × (Digital,
when [D.EXTENDER] is set to [ON])
Focal length
XLR 3-pin, female,
f=4.1 - 82.0 mm (3/16 - 3 1/4 in.)
When converted to a 35 mm still
camera*
29.5 - 590 mm (1 3/16 - 23 1/4 in.)
(16:9),
MIC: -48 dBu: 3 kΩ (kilohms)
(Variable in the range of between
-60 dBu and -30 dBu in 6 dBu step by
the INPUT TRIM function)
LINE: +4 dBu: 10 kΩ (kilohms)
Continued ,
105
Specifications (Continued)
(0 dBu = 0.775 Vrms)
AC Adaptor AC-L100C
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Current consumption
0.35 A - 0.18 A
Power consumption
18 W
Input/Output connectors
USB jack
mini-B
Remote jack
Stereo mini-minijack (Ø 2.5 mm)
Output voltage
LCD screen
DC 8.4 V*
Picture
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
48 × 29 × 81 mm
8.0 cm (3.2 type, aspect ratio 16:9)
Total dot number
921 600 (1 920 × 480)
General
Power requirements
(1 15/16 × 1 3/16 × 3 1/4 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption
During camera recording using the
viewfinder with normal brightness:
HD recording 6.7 W
170 g (6.0 oz) excluding the power cord
(mains lead)
* See the label on the AC Adaptor for other
specifications.
SD recording 5.9 W
Rechargeable battery pack NP-F570
Maximum output voltage
DC 8.4 V
During camera recording using the
LCD with normal brightness:
HD recording 6.7 W
Output voltage
DC 7.2 V
Maximum charge voltage
DC 8.4 V
SD recording 5.9 W
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
Maximum charge current
3.0 A
Capacity
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
173 × 193 × 393 mm
Typical: 15.8 Wh (2 200 mAh)
Minimum: 15.0 Wh (2 100 mAh)
Type
(6 7/8 × 7 5/8 × 15 1/2 in.) (w/h/d)
including the projecting parts
Mass (approx.)
Li-ion
2.1 kg (4 lb 11 oz) including the lens
hood with lens cover
2.3 kg (4 lb 15 oz) including the battery
pack (NP-F570), lens hood with lens
cover
Design and specifications are subject to change
without notice.
• Manufactured under license from Dolby
Laboratories.
106
On trademarks
Notes on the License
• “Handycam” and
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING
VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED
WITHOUT A LICENSE UNDER APPLICABLE
PATENTS IN THE MPEG-2 PATENT
PORTFOLIO, WHICH LICENSE IS
are
registered trademarks of Sony Corporation.
• “AVCHD” and “AVCHD” logotype are
trademarks of Panasonic Corporation and Sony
Corporation.
• “Memory Stick ,” “
Duo,” “
PRO Duo,” “
“Memory Stick PRO-HG Duo,”
“
“
,” “Memory Stick
,” “Memory Stick
,”
AVAILABLE FROM MPEG LA, L.L.C., 250
STEELE STREET, SUITE 300, DENVER,
COLORADO 80206.
,” “MagicGate,”
,” “MagicGate Memory
Stick” and “MagicGate Memory Stick Duo” are
trademarks of Sony Corporation.
• “InfoLITHIUM” is a trademark of Sony
Corporation.
is a trademark of Sony Corporation.
• “x.v.Color” is a trademark of Sony Corporation.
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL
USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH
THE AVC STANDARD (“AVC VIDEO”) AND
•
• Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
/OR
(ii) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC
VIDEO.
• Microsoft, Windows, and Windows Vista are
trademarks or registered trademarks of U.S.
Microsoft Corporation in the U.S. and other
countries.
• Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE.
• HDMI, HDMI logo, and High-Definition
Multimedia Interface are trademarks or
ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C.
SEE <HTTP://MPEGLA.COM>
registered trademarks of HDMI Licensing LLC.
• Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries.
• Adobe, the Adobe logo, and Adobe Acrobat are
either registered trademarks or trademarks of
Adobe Systems Incorporated in the United
States and/or other countries.
“C Library,” “Expat,” “zlib,” “libjpeg,” “dtoa”
and “pcre” software are provided in your
camcorder. We provide this software based on
license agreements with their owners of
copyright. Based on requests
by the owners of copyright of these software
applications, we have an obligation to inform you
of the following. Please read the following
sections.
Read “license1.pdf” in the “License” folder on the
CD-ROM “Content Management Utility.” You
will find licenses (in English) of “C Library,”
“Expat,” “zlib,” “libjpeg,” “dtoa” and “pcre”
software.
• SDHC logo is a trademark.
• MultiMedia Card is a trademark of
MultiMediaCard Association.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and “®”
are not mentioned in each case in this manual.
Continued ,
107
Specifications (Continued)
On GNU GPL/LGPL applied software
The software that is eligible for the following
GNU General Public License (hereinafter referred
to as “GPL”) or GNU Lesser General Public
License (hereinafter referred to as “LGPL”) are
included in the camcorder.
This informs you that you have a right to have
access to, modify, and redistribute source code for
these software programs under the conditions of
the supplied GPL/LGPL.
Source code is provided on the web. Use the
following URL to download it. When
downloading the source code, select HDR-
AX2000 as the model for your camcorder.
http://www.sony.net/Products/Linux/
We would prefer you do not contact us about the
contents of source code.
Read “license2.pdf” in the “License” folder on the
CD-ROM “Content Management Utility.” You
will find licenses (in English) of “GPL,” and
“LGPL” software.
To view the PDF, Adobe Reader is needed. If it is
not installed on your computer, you can download
it from the Adobe Systems web page:
http://www.adobe.com/
108
QIduicek Rnetfeirefnyceing parts and controls
The numbers in ( ) are reference pages.
A VIDEO OUT jack/AUDIO OUT jacks
S REMOTE jack
(51)
The REMOTE jack is used for
controlling playback, etc. on the video
device and peripherals connected to it.
D
USB jack (81)
W ASSIGN 7/EXPANDED FOCUS
J Microphone holder
button (43)
K Accessory shoe
L Microphone fixing clamper
O Cable holder
Provided for securing a microphone
cable, etc.
Continued ,
109
Identifying parts and controls (Continued)
* The ASSIGN 5/AE SHIFT button and the
ASSIGN 2 button have raised tactile dots for
your convenience in locating the button.
The recording lamp flashes if the
remaining capacity of the memory card
or battery is low.
H ASSIGN 6/VISUAL INDEX button
(43)
N CH2 (INT MIC/INPUT1/INPUT2)
switch (39)
110
A Hook for shoulder strap
To attach a shoulder strap
Attach a shoulder strap (sold separately) to
the hooks for a shoulder strap.
J i (headphones) jack
For stereo mini-jack headphones
M Memory card B slot/select button/access
lamp (23)
N Memory card A slot/select button/
O
(One push) button (34)
* WHT BAL button has a raised tactile dot for
your convenience in locating the button.
Continued ,
111
Identifying parts and controls (Continued)
A RESET button
If you press the RESET button, all
settings including the clock setting
(except the picture profile settings)
return to the default.
65)
C Playback control buttons (PREV/
PLAY*/NEXT/STOP/PAUSE/SCAN/
* PICTURE PROFILE button, VOLUME+
button, MENU button, and PLAY button have
raised tactile dots for your convenience in
locating the buttons.
**MENU button has a raised tactile bar for your
convenience in locating the button.
The recording lamp flashes if the
remaining capacity of the memory card
or battery is low.
112
b Notes
Wireless Remote Commander
• Aim the Wireless Remote Commander towards
the remote sensor to operate your camcorder.
• Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Wireless Remote
Commander may not function properly.
Remove the insulation sheet before using
the Wireless Remote Commander.
Insulation sheet
• When you are operating with the Wireless
Remote Commander supplied with your
camcorder, your video device may also operate.
In that case, select a commander mode other
than DVD2 for your video device, or cover the
sensor of your video device with black paper.
To change the battery of the Wireless
Remote Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2 Place a new battery with the + side facing
up.
3 Insert the battery case back into the
Wireless Remote Commander until it
clicks.
Tab
B TC RESET button
This button does not work with this
camcorder.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in
fire.
• When the lithium battery becomes weak, the
operating distance of the Wireless Remote
Commander may shorten, or the Wireless
Remote Commander may not function properly.
In this case, replace the battery with a Sony
CR2025 lithium battery. Use of another battery
may present a risk of fire or explosion.
H Transmitter
M b/B/v/V/ENTER buttons
113
Screen indicators
Bottom
Center
Upper right
Upper left
Indicator
Meaning
D.EXTENDER (72)
x.v.Color (72)
Bottom
9
~
Manual focus (30)
Picture profile (35)
Upper left
.
Indicator
Meaning
t 60min
Remaining battery
WIDE REC (73)
9dB
60
Shutter speed (32)
Manual volume control
(40)
Center
Indicator
Meaning
Auto setting (78)
White balance (33)
Memory card
n
B
A
Relay recording (26)
z Tips
STBY REC
Recording status (25)
Warning (92)
• Indicators may look different or appear at
different positions.
E
N
Playback indicator (45)
Data code during recording
The recording date, time and condition are
recorded automatically on the memory
card. They are not displayed while
recording. However, you can check them
by pressing the DATA CODE button
Upper right
Indicator
Meaning
0min
Estimated remaining
recording time
Recording/playback
media
00:00:00:00
Time code
(hour:minute:second:
frame)
LCD backlight off (20)
BLACK FADER
114
Index (Continued)
N
L
O
REPAIR IMAGE DB FILE
S
P
M
SHUTTER SPEED button
PICTURE PROFILE button
“Memory Stick Duo” media
Pre-installed rechargeable
“Memory Stick PRO Duo”
T
PUSH (lens hood release)
R
116
Z
U
Using your camcorder abroad
V
Viewfinder lens adjustment
VISUAL INDEX/ASSIGN 6
W
White balance memory switch
Wireless Remote Commander
X
117
Procedimientos iniciales
Paso 1: Comprobación de los elementos
suministrados
Ocular grande (1) (pág. 124)
Asegúrese de que su videocámara contiene
los siguientes elementos.
El número entre paréntesis indica la
cantidad del elemento.
• No se incluyen las tarjetas de memoria.
Adaptador de alimentación de ca
Batería recargable (NP-F570) (1)
Cable de alimentación (1) (pág. 120)
Parasol del objetivo con tapa del objetivo
Este parasol del objetivo está premontado.
Control remoto inalámbrico (RMT-845) (1)
CD-ROM “Content Management Utility” (1)
Guía de operaciones (1)
Tiene instalada una pila de litio tipo botón.
Cable de video componente (1)
Cable de conexión A/V (1)
Cable USB (1)
118
Paso 2: Colocación del parasol del objetivo con
tapa del objetivo
Para abrir o cerrar el obturador del
parasol del objetivo con tapa del
objetivo
Mueva la palanca de la tapa del objetivo a
la posición OPEN para abrir la tapa del
objetivo y muévala a la posición CLOSE
para cerrarla.
Botón PUSH (liberación del parasol del
objetivo)
Alinee las marcas en el parasol con
las marcas en la videocámara y gire
el parasol del objetivo en la
dirección que indica la flecha 2
hasta que se bloquee.
Para extraer el parasol del objetivo
con tapa del objetivo
Gire el parasol del objetivo en la dirección
opuesta a la de la flecha 2 de la ilustración
mientras presiona el botón PUSH
(liberación del parasol del objetivo).
z Consejos
• Si coloca o retira un filtro PL de 72 mm o el
protector MC, retire el parasol del objetivo con
tapa del objetivo.
119
Paso 3: Carga de la batería
Puede cargar la batería
“InfoLITHIUM” (serie L) con el
adaptador de alimentación de ca
suministrado.
1
Ejerza presión sobre la batería
contra la parte posterior de la
videocámara y deslícela hacia
abajo.
b Notas
• No se puede utilizar baterías que no sean
“InfoLITHIUM” (serie L).
2
Con la marca B de la clavija de cc
hacia fuera, conecte la clavija de
cc a la toma de DC IN de la
videocámara.
Clavija de cc
Toma DC IN
Cable de
alimentación
Adaptador de
alimentación de ca Al tomacorriente
de pared
Marca B
3
4
Conecte el cable de alimentación
al adaptador de alimentación de
ca
Conecte el cable de alimentación
al tomacorriente de la pared.
120
Para retirar la batería
5
Ajuste el interruptor POWER en
OFF (CHG).
Deslice el interruptor POWER a la posición
OFF (CHG). Presione el botón BATT
RELEASE (liberación de la batería) y retire
la batería.
El indicador CHG se enciende y se
inicia el proceso de carga.
Botón BATT RELEASE
(liberación de la batería)
Para guardar la batería
Si deja de usar la batería por un tiempo,
úsela hasta agotarla y guárdela.
Después de cargar la batería
Tiempo de carga
El indicador CHG se apaga cuando la
batería está completamente cargada.
Desconecte el adaptador de alimentación de
ca de la toma de DC IN.
Tiempo aproximado (m) necesario para
cargar totalmente una batería descargada
por completo.
Tiempo de
Batería
carga
z Consejos
NP-F570 (suministrada)
NP-F770
260
370
485
• Puede comprobar la carga restante de la batería
con la función de comprobación de estado.
NP-F970
b Notas
• No se pueden usar baterías NP-F330 con esta
videocámara.
Continuación ,
121
(Continuación)
Paso 4: Encendido y
sujeción adecuados
de la videocámara
Para grabar o reproducir, coloque el
interruptor POWER en la posición ON.
La primera vez que utilice la videocámara,
aparecerá la pantalla [AJUS.RELOJ]
Acerca de la batería
• Antes de cambiar la batería, ajuste el interruptor
POWER en la posición OFF (CHG).
• El indicador CHG parpadeará durante la carga o
la información de la batería no se mostrará
correctamente en las siguientes condiciones.
– La batería no está correctamente conectada.
– La batería está dañada.
– La batería está gastada.
– La batería está demasiado fría.
Remueva la batería y colóquela en un lugar
cálido.
– La batería está demasiado caliente.
Remueva la batería y colóquela en un lugar
frío.
• Cuando el adaptador de alimentación de ca esté
conectado a la toma de DC IN de la
videocámara, la batería no suministrará
alimentación, incluso si el cable de alimentación
está desconectado al tomacorriente de pared.
Interruptor POWER
Tiempo de carga
• Tiempo medido con la videocámara a 25 °C
Se recomienda de 10 °C a 30 °C
1
Deslice el interruptor POWER a la
posición ON mientras presiona el
botón verde.
Uso de una fuente de alimentación
externa
Puede usar un adaptador de alimentación de
ca para obtener energía de ca
Mantenga
presionado el
botón verde.
Mientras utiliza el adaptador de
alimentación de ca la batería no perderá su
carga aunque esté conectada a la cámara.
b Notas
Conecte la videocámara como se
muestra en “Paso 3: Carga de la
• La fecha y hora actuales aparecen en la pantalla
LCD por unos segundos al encender la
videocámara después de haberse ajustado la
Acerca del adaptador de alimentación de
ca
• Evite los cortocircuitos en la clavija de cc del
adaptador de alimentación de ca o en el terminal
de la batería con objetos metálicos. Podría
provocar una falla de funcionamiento.
122
Paso 5: Ajuste del
panel LCD y el visor
Panel LCD
2
3
Sostenga la videocámara
correctamente.
Abra el panel LCD 180 grados (1), luego
gírelo hasta encontrar el mejor ángulo para
grabar o reproducir (2).
1Abra 180 grados.
290 grados
(máx.)
2180 grados
(máx.)
Asegúrese de que la sostiene
correctamente y luego ajuste la
correa de sujeción.
Botón DISPLAY
z Consejos
• Las imágenes se muestran como imágenes de
espejo en la pantalla LCD, pero se graban como
imágenes normales.
Para desactivar la luz de fondo de la
pantalla LCD y prolongar la duración
de la batería
Mantenga presionado el botón DISPLAY
durante unos segundos hasta que aparezca
.
Para apagar la videocámara
Este ajuste es práctico cuando utiliza la
videocámara en lugares muy luminosos o
cuando desea ahorrar energía. Este ajuste
no afectará a la imagen grabada. Para
encender la luz de fondo de la pantalla
LCD, mantenga presionado el botón
DISPLAY durante unos segundos hasta que
desaparezca.
Deslice el interruptor POWER a la posición
OFF (CHG).
b Notas
• Si en la pantalla aparecen mensajes de
advertencia, siga las instrucciones.
Además, puede encender la luz de fondo de
la pantalla LCD al encender/apagar la
videocámara.
Continuación ,
123
Paso 5: Ajuste del panel LCD y el visor (Continuación)
z Consejos
• Puede ajustar el brillo de la pantalla LCD en
[BRILLO LCD].
colocar el ocular grande hacia el lado
derecho o izquierdo.
b Notas
• No retire el ocular preinstalado.
Visor
Ocular grande
(suministrado)
Puede ver imágenes utilizando el visor para
ahorrar energía de la batería o cuando la
imagen en la pantalla LCD no sea clara.
Coloque con la
pieza que
sobresale hacia
Palanca de ajuste del
objetivo del visor
Muévala hasta que la
imagen aparezca nítida.
arriba.
b Notas
• Es posible que los colores primarios produzcan
algún resplandor cuando en el visor usted
cambie su línea visual. No se trata de una falla
de funcionamiento. Los colores
resplandecientes no se graban en la tarjeta de
memoria.
z Consejos
• Puede ajustar el brillo de la luz de fondo del
visor con [LUZ FONDO VISOR].
• Para ver imágenes tanto en la pantalla LCD
como en el visor, ajuste [M.ALIM.VISOR] en
[ACTIVADO].
Cuando tenga dificultades para ver la
imagen del visor
Si no puede ver claramente la imagen en el
visor en condiciones de brillo, use el ocular
grande suministrado. Para colocar el ocular
grande, ensánchelo un poco y alinéelo con
la ranura del ocular en el visor. Puede
124
Paso 6: Ajuste de la fecha y la hora
Ajuste la fecha y la hora cuando use la
videocámara por primera vez. De lo
contrario, la pantalla [AJUS.RELOJ]
aparecerá cada vez que encienda la
videocámara.
2
3
4
5
Seleccione
el selector SEL/PUSH EXEC,
luego presione el selector.
(OTROS) girando
z Consejos
• Si no usa la videocámara durante
aproximadamente 3 meses, la batería
recargable incorporada se descarga y es posible
que los ajustes de la fecha y la hora se borren de
la memoria. En este caso, cargue la batería
recargable y ajuste la fecha y la hora
nuevamente.
Seleccione [AJUS.RELOJ]
girando el selector SEL/PUSH
EXEC, luego presione el selector.
Seleccione el área girando el
selector SEL/PUSH EXEC y luego
presione el selector.
Botón
MENU
Selector SEL/
PUSH EXEC
Vaya directamente al paso 4 cuando ajuste
el reloj por primera vez.
1
Presione el botón MENU.
Ajuste [HORA VERANO], [A]
(año), [M] (mes), [D] (día), hora y
minuto, girando el selector SEL/
PUSH EXEC y luego presione el
selector.
Continuación ,
125
hora (Continuación)
Paso 7: Inserción de
una tarjeta de
memoria
1
Abra la tapa en la dirección que
indica la flecha.
El reloj se pone en marcha.
• Ajuste [HORA VERANO] en la posición
[ACTIVADO] para avanzar 1 h
• Puede seleccionar cualquier año hasta el año
2037.
• Para la medianoche, ajústelo en 12:00 AM.
Para el mediodía, ajústelo en 12:00 PM.
z Consejos
• La fecha y la hora se graban automáticamente
en la tarjeta de memoria seleccionada y se
pueden ver durante la reproducción (botón
DATA CODE).
2
Oriente la esquina biselada de la
tarjeta de memoria como se
muestra en la ilustración e
insértela en la ranura para tarjeta
de memoria hasta que calce.
.
Cambio del ajuste de idioma
Ranura para tarjeta de memoria
A e indicador de acceso
Puede cambiar las indicaciones en pantalla
para que muestren mensajes en un idioma
en particular.
Presione el botón MENU y seleccione
(OTROS) con el selector SEL/PUSH
EXEC. Seleccione el idioma de los
mensajes en pantalla en [LANGUAGE].
Ranura para tarjeta de memoria
B e indicador de acceso
Inserte la esquina biselada
primero, mirando hacia abajo.
b Notas
• Si inserta una tarjeta de memoria en la
ranura en la dirección incorrecta, puede
dañarse la tarjeta de memoria, la ranura para
tarjeta de memoria o los datos de imágenes.
126
• Cuando inserta una nueva tarjeta de
memoria en modo de espera, aparece la
pantalla [Crear nuevo arch.base de datos de
imágenes.]. Siga las indicaciones en
pantalla y toque [SÍ].
Para expulsar la tarjeta de memoria
Empuje suavemente la tarjeta de memoria
una vez.
b Notas
Botón A de la ranura para
tarjeta de memoria
• Cuando el indicador de acceso se enciende o
parpadea en color rojo, la videocámara está
leyendo o grabando datos. No sacuda ni golpee
la videocámara, no la apague, ni extraiga la
tarjeta de memoria ni retire la batería. De lo
contrario, se podrían dañar los datos de
imágenes.
Botón B de la ranura para
tarjeta de memoria
b Notas
• Sólo puede seleccionar una ranura que ya tenga
una tarjeta de memoria insertada.
• Mientras se graban películas en la tarjeta de
memoria, no puede cambiar la ranura aunque
presione los botones A/B de la ranura para
tarjeta de memoria.
• Si aparece [Error al crear un nuevo archivo de
base de datos de imágenes. Es posible que no
exista suficiente espacio libre.] en el paso 2,
formatee la tarjeta de memoria.
• Al insertar o expulsar la tarjeta de memoria,
tenga cuidado de evitar que la tarjeta de
memoria no salte ni se caiga.
z Consejos
• Cuando sólo una ranura tiene una tarjeta de
memoria insertada, la ranura que tiene la tarjeta
de memoria se selecciona automáticamente.
Selección de la ranura para tarjeta de
memoria que se usará en la grabación
Presione el botón A o B de la ranura para
tarjeta de memoria donde está insertada la
tarjeta de memoria con la que desea grabar.
El indicador de la ranura seleccionada se
enciende de color verde.
• Si el espacio de la tarjeta de memoria se ocupa
completamente durante la grabación, la
videocámara continúa la grabación
automáticamente en la tarjeta de memoria
insertada en la otra ranura (Grabación con
127
Grabación/Reproducción
Grabación
Indicador de
grabación
Botón de grabación de
la manija
Indicador de
grabación
Parasol del objetivo
Interruptor POWER
Botón de grabación
La videocámara graba películas en las tarjetas de memoria. Proceda de la siguiente forma para
grabar películas.
• Esta videocámara puede grabar películas con calidad de imagen de alta definición (HD) o calidad de
imagen de definición estándar (SD). El ajuste predeterminado de fábrica es calidad de imagen de alta
b Notas
• Cuando el indicador de acceso está encendido o parpadeando de color rojo, la videocámara está
escribiendo datos en la tarjeta de memoria. No sacuda ni golpee la videocámara y no retire el adaptador de
alimentación de ca ni la batería.
• La videocámara puede grabar películas durante 13 h aproximadamente.
• Si un archivo de película excede los 2 GB durante la grabación, la videocámara divide el archivo y crea un
nuevo archivo automáticamente.
• Los ajustes de menú, los ajustes de PICTURE PROFILE y los ajustes realizados con el interruptor AUTO/
MANUAL se almacenan en la videocámara cuando ajusta el interruptor POWER en la posición OFF. El
indicador de acceso se enciende mientras se almacenan los ajustes. Si retira la batería o el adaptador de
alimentación de ca antes de apagar la videocámara, es posible que los ajustes regresen a los valores
predeterminados.
1
Abra el obturador del parasol del objetivo.
128
2
3
Deslice el interruptor POWER a la posición ON mientras presiona el botón
verde.
Mantenga presionado el
botón verde.
Presione el botón de grabación o el botón de grabación de la manija.
[ESPERA] t [GRAB.]
El indicador de grabación se enciende durante la grabación.
Para detener la grabación de una película, vuelva a presionar el botón de grabación o el
botón de grabación de la manija.
z Consejos
• Al grabar con calidad de imagen de alta definición (HD), la relación de aspecto está ajustada en 16:9. Al
grabar con calidad de imagen de definición estándar (SD), puede cambiar la relación de aspecto a 4:3
([GRABACIÓN PANOR.
]).
• Puede cambiar la visualización de la pantalla durante la grabación.
• El indicador de grabación se puede desactivar ([IND.GRAB.]).
• Para grabaciones de ángulo bajo, resulta conveniente usar el botón de grabación de la manija. Suelte la
palanca HOLD para activar el botón de grabación de la manija. Tal vez resulte útil colocar el panel LCD
cara arriba o cerrarlo después de colocarlo cara abajo o levantar el visor durante este tipo de grabación.
• Puede capturar imágenes fijas a partir de las películas que grabó.
Continuación ,
129
Grabación (Continuación)
Grabación continua en las tarjetas de memoria, una después de otra (Grabación
con relevo)
Inserte las tarjetas de memoria en las ranuras A y B, de manera que la videocámara cambie la
tarjeta de memoria A (o B) justo antes de que se termine el espacio de la otra tarjeta y continúe
grabando en la siguiente tarjeta de memoria en forma automática.
Inserte una tarjeta de memoria que se pueda grabar.
Espacio pequeño
Término
Inicio
REC: Grabación
Espacio pequeño
b Notas
• No expulse la tarjeta de memoria que se está usando actualmente para grabar. Reemplace sólo la tarjeta de
memoria cuyo indicador de ranura esté apagado.
• Aunque presione el botón de la ranura de tarjeta de memoria, no es posible cambiar la ranura que se está
usando actualmente, A o B, mientras se graban películas.
• Cuando el tiempo de grabación restante de la tarjeta de memoria que está usando es menor a 1 m y la otra
ranura tiene insertada una tarjeta de memoria que se puede grabar, aparece [
] o [
] en
la pantalla de la videocámara. El indicador se apaga cuando se cambia la tarjeta de memoria.
• Si comienza la grabación en una tarjeta de memoria con tiempo de grabación restante menor a 1 minuto,
es posible que la videocámara no pueda grabar con relevo. Para grabar con relevo sin errores, asegúrese de
que la tarjeta de memoria tenga más de 1 m al iniciar la grabación.
• Esta videocámara no puede reproducir sin cortes las películas grabadas con relevo.
• Puede volver a combinar las películas grabadas con relevo utilizando el software de aplicación
suministrado (sólo Windows).
Selección del formato de grabación
Puede seleccionar el formato de grabación (velocidad de bits, calidad de imagen, tamaño de
imagen, velocidad de cuadros, sistema de exploración). En el ajuste predeterminado,
[
] está seleccionado.
Para cambiar el ajuste
Presione MENU t seleccione
selector SEL/PUSH EXEC.
(AJUSTE GRAB./SALIDA) t [FORM.GRAB.] con el
130
Valor de ajuste
Descripción
• Velocidad de bits
FX: máx. 24 Mbps
FH: aprox. 17 Mbps (promedio)
HQ: aprox. 9 Mbps (promedio)
LP: aprox. 5 Mbps (promedio)
• Calidad de imagen
HD: Calidad de imagen de alta definición
SD: Calidad de imagen de definición estándar
• Tamaño de imagen
FX: 1920×1080
FH: 1920×1080
HQ: Grabación HD 1440×1080
Grabación SD 720×480
LP: 1440×1080
• Velocidad de cuadros
24, 30 ó 60
• Sistema de exploración
i: entrelazado
p: progresivo
pSCAN: Graba imágenes de sistema de exploración progresiva como
señal entrelazada (60i).
Valor de ajuste
Por ejemplo, si selecciona [
], las películas se graban con el siguiente formato.
• HD: Calidad de imagen de alta definición. SD es la calidad de imagen de definición
estándar.
• 1080: Líneas de exploración efectivas
• 60: Velocidad de cuadros
• i: Sistema de exploración
• FX: Modo de grabación
b Notas
• El modo de grabación se ajusta en FX o FH con el sistema de exploración progresiva.
131
Additional information on this product and answers
to frequently asked questions can be found at our
Customer Support Website.
http://www.sony.net/
Printed on 70% or more recycled paper using VOC
(Volatile Organic Compound)-free vegetable oil
based ink.
Printed in Japan
|