4-264-740-12(1)
Digital Video Camera
Recorder
Operating Guide
DCR-SX45E/SX65E/SX85E
will help to conserve natural resources.
In case of products that for safety,
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
performance or data integrity reasons
require a permanent connection with an
incorporated battery, this battery should
be replaced by qualified service staff only.
To ensure that the battery will be treated
properly, hand over the product at end-of-
life to the applicable collection point for
the recycling of electrical and electronic
equipment.
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
For all other batteries, please view the
section on how to remove the battery from
the product safely. Hand the battery over
to the applicable collection point for the
recycling of waste batteries.
For more detailed information about
recycling of this product or battery, please
contact your local Civic Office, your
household waste disposal service or the
shop where you purchased the product.
electrical and electronic equipment.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise
be caused by inappropriate waste handling
of this product. The recycling of materials
will help to conserve natural resources.
For more detailed information about
recycling of this product, please contact
your local Civic Office, your household
waste disposal service or the shop where
you purchased the product.
Notice for customers in the United
Kingdom
A moulded plug complying with BS 1363 is
fitted to this equipment for your safety and
convenience.
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
Should the fuse in the plug supplied need
to be replaced, a fuse of the same rating as
the supplied one and approved by ASTA or
BSI to BS 1362, (i.e., marked with an or
mark) must be used. If the plug supplied
with this equipment has a detachable fuse
cover, be sure to attach the fuse cover after
you change the fuse. Never use the plug
without the fuse cover. If you should lose
the fuse cover, please contact your nearest
Sony service station.
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste.
On certain batteries this symbol might
be used in combination with a chemical
symbol. The chemical symbols for mercury
(Hg) or lead (Pb) are added if the battery
contains more than 0.0005% mercury or
0.004% lead.
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment
and human health which could otherwise
be caused by inappropriate waste handling
of the battery. The recycling of the materials
GB
ꢁ
For the customers in the U.S.A.
Declaration of Conformity
Trade Name: SONY
If you have any questions about this
product, you may call:
Model No.: DCR-SX85E
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Sony Customer Information Center 1-800-
222-SONY (7669).
The number below is for the FCC related
matters only.
Telephone No.: 858-942-2230
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-SX45E
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
Note
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules.
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-SX65E
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
GB
ꢂ
equipment and receiver.
Using the camcorder
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
Do not hold the camcorder by the following
parts, and also do not hold the camcorder by
the jack covers.
LCD screen
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
Battery pack
Battery pack
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Built-in USB Cable
Supplied items
The numbers in ( ) are the supplied
quantity.
AC Adaptor (1)
Power cord (Mains lead) (1)
A/V connecting cable (1)
USB connection support cable (1)
the Built-in USB Cable is not long enough.
The camcorder is not dustproofed, dripproofed
or waterproofed. See “Precautions” (p. 55).
Rechargeable battery pack NP-FV30 (1)
Menu items, LCD panel, and lens
CD-ROM “Handycam” Application
A menu item that is grayed out is not available
under the current recording or playback
conditions.
Software (1)
“PMB” (software, including “PMB Help”)
“Handycam” Handbook (PDF)
“Operating Guide” (This manual) (1)
“PMB Portable” software is pre-loaded on the
camcorder (p. 33).
with this camcorder.
GB
ꢃ
The LCD screen is manufactured using
extremely high-precision technology, so over
99.99% of the pixels are operational for effective
use. However, there may be some tiny black
points and/or bright points (white, red, blue,
or green in color) that appear constantly on the
LCD screen. These points are normal results of
the manufacturing process and do not affect the
recording in any way.
playback is not possible due to a malfunction of
the camcorder, storage media, etc.
TV color systems differ depending on the
country/region. To view your recordings on a
TV, you need a PAL system-based TV.
Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials may
be contrary to copyright laws.
Note on playback
Images recorded on your camcorder may not
play correctly on other devices.
Conversely, images recorded on other devices
may not play correctly on this camcorder.
Movies recorded on SD memory cards
cannot be played on AV equipment of other
manufacturers.
Black points
White, red, blue or green points
Exposing the LCD screen or the lens to direct
sunlight for long periods of time may cause
malfunctions.
Do not aim at the sun. Doing so might cause
your camcorder to malfunction. Take images
of the sun only in low light conditions, such as
at dusk.
Save all your recorded image data
To prevent your image data from being lost,
save all your recorded images on external media
periodically. It is recommended that you save
the image data on a disc such as a DVD-R using
your computer. Also, you can save your image
data using a VCR or a DVD/HDD recorder,
etc. (p. 38).
About changing the language setting
The on-screen displays in each local language
are used for illustrating the operating
procedures. Change the screen language before
using your camcorder if necessary (p. 15).
Notes on battery pack/AC Adaptor
Be sure to remove the battery pack or the AC
Adaptor after turning off the camcorder.
Disconnect the AC Adaptor from the
camcorder, holding both the camcorder and the
DC plug.
Recording
When you use a memory card with your
camcorder for the first time, formatting the
recommended for stable operation.
All data recorded on the memory card will
be deleted when it is formatted, and cannot
be recovered. Save important data to your
computer, etc., beforehand.
Note on the camcorder/battery pack
temperature
When the temperature of the camcorder
or battery pack becomes extremely high or
extremely low, you may not be able to record
or play back on the camcorder, due to the
protection features of the camcorder being
activated in such situations. In this case, an
indicator appears on the LCD screen.
Before starting to record, test the recording
function to make sure that the image and sound
are recorded without any problems.
Compensation for the contents of recordings
cannot be provided, even if recording or
GB
ꢄ
illustration purposes are captured using a
digital still camera, and therefore may appear
different from images and screen indicators that
actually appear on your camcorder. And, the
illustrations of your camcorder and its screen
indication are exaggerated or simplified for
understandability.
In this manual, the internal memory (DCR-
SX65E/SX85E) of your camcorder and memory
card are called “recording media.”
When the camcorder is connected to a
computer or accessories
Do not try to format the recording media of the
camcorder using a computer. If you do so, your
camcorder may not operate correctly.
When connecting your camcorder to another
device with a cable, be sure to insert the
connector plug in the correct way. Pushing the
plug forcibly into the terminal will damage the
terminal and may result in a malfunction of
your camcorder.
Do not close the LCD screen while your
camcorder is turned and connected to USB. The
recorded movies or photos may be lost.
Design and specifications of your camcorder
and accessories are subject to change without
notice.
Confirm the model name of your
camcorder
The model name is shown in this manual when
there is a difference in specification between
models. Confirm the model name on the
bottom of your camcorder.
If you cannot record/play back images,
perform [MEDIA FORMAT]
If you repeat recording/deleting images for
a long time, fragmentation of data occurs on
the recording media. Images cannot be saved
or recorded. In such a case, save your images
on some type of external media first, and then
perform [MEDIA FORMAT] by touching
(MENU) [Show others] [MEDIA
The main differences in specification of this
series are as follows.
Recording
media
Capacity
of internal
recording
media
FORMAT] (under
[MANAGE MEDIA]
category) the desired medium (DCR-
SX65E/SX85E) [YES] [YES]
.
DCR-SX45E Memory card
DCR-SX65E Internal
4 GB
16 GB
Carl Zeiss lens
Your camcorder is equipped with a Carl Zeiss
lens, which was developed jointly by Carl
memory +
DCR-SX85E
memory card
Zeiss, in Germany, and Sony Corporation, and
produces superior images. It adopts the MTF
measurement system for video cameras and
offers a quality typical of a Carl Zeiss lens.
MTF= Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
Notes on use
Do not do any of the following, otherwise, the
recording media may be damaged, recorded
images may be impossible to play back or may
be lost, or other malfunctions could occur.
Eject the memory card when the access lamp
Remove the battery pack or AC Adaptor from
the camcorder, or subject the camcorder to
shock or vibration when the
When using a shoulder belt (sold separately), do
not crash the camcorder against an object.
Notes on optional accessories
We recommend using genuine Sony accessories.
Availability of such products is subject to
country/region.
(Movie)/
About images, illustrations, and screen
displays of this manual
The example images used in this manual for
GB
ꢅ
Operation flow
Getting started (p. 11)
Prepare the power source and recording media.
Recording movies and photos (p. 19)
Changing the recording mode
Expected recording time (MEDIA INFO)
Playing movies and photos
Saving images
Deleting movies and photos (p. 28)
If you delete the image data that has been saved on your computer
or a disc, you can record new images on the free media space
again.
GB
ꢆ
Table of contents
Read this first. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Operation flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 1: Charging the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Charging the battery pack abroad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Step 2: Turning the power on, and setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Changing the language setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Step 3: Preparing the recording media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
To check the recording media settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
to memory card (DCR-SX65E/SX85E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Playback on the camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Playing images on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Deleting movies and photos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Preparing a computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
When using a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Starting PMB (Picture Motion Browser). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using “PMB Portable”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Saving images in external media (DIRECT COPY). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Creating a disc with a DVD writer, recorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Getting detailed information from the “Handycam”Handbook . . . . . . . . . . . . . . . . . . . . . . . . . 49
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Recording time of movies/number of recordable photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
GB
ꢇ
Screen indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Parts and controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
1G0B
Getting started
Step 1: Charging the battery pack
CHG (charge) lamp
Battery pack
Power cord
(Mains lead)
DC IN jack
DC plug
To the wall outlet
(wall socket)
AC Adaptor
You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your
camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
Turn off your camcorder by closing the LCD screen.
1
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
2
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
3
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
4
GB
11
To charge with a computer
This function is useful if the AC Adaptor is not at hand.
Turn off the power of your camcorder, then attach the battery.
Connect your camcorder to the computer that is turned on with the Built-in USB Cable.
When charging is finished, terminate the USB connection between your camcorder and
computer (p. 32).
Notes
Correct operation with all computers is not guaranteed.
Charging the battery or the connection with customized or hand-built computers is not guaranteed.
Depending on the type of USB device used, charging may not function properly.
If you connect the camcorder to a notebook computer that is not connected to an AC power source, the
battery of the notebook computer may be depleted rapidly. In this case, do not leave your camcorder
connected for a long time.
Tips
You can charge your camcorder by using the Built-in USB Cable from the wall outlet (wall socket) with
the USB charging AC adaptor AC-U501AD/AC-U50AG (sold separately). You cannot use Sony portable
power unit CP-AH2R/CP-AL (sold separately).
The USB charging AC adaptor may not be available in some countries/regions.
The CHG (charge) lamp may not light when the battery is low. Charge with the AC adapter in such
situation.
When your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery
pack ().
1GꢀB
To use a wall outlet (wall socket) as a power source
attached, the battery pack is not discharged.
Charging the battery pack abroad
You can charge the battery pack in any countries/regions using the AC Adaptor supplied with
your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.
Notes
Do not use an electronic voltage transformer.
Notes on the battery pack
When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure
that the
The CHG (charge) lamp flashes during charging under the following conditions:
The battery pack is not attached correctly.
The battery pack is damaged.
The temperature of the battery pack is low.
Remove the battery pack from your camcorder and put it in a warm place.
The temperature of the battery pack is high.
Remove the battery pack from your camcorder and put it in a cool place.
In the default setting, the power turns off automatically if you leave your camcorder without any
operation for about 5 minutes, to save battery power ([A.SHUT OFF]).
Notes on the AC Adaptor
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from
the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
GB
1ꢁ
Step 2: Turning the power on, and setting the
date and time
Open the LCD screen of your camcorder.
1
Your camcorder is turned on and the lens cover is opened.
To turn on your camcorder when the LCD screen is open, press POWER.
POWER button
MODE lamp
Select the desired geographical area with
/
, then touch [NEXT].
2
3
Touch the button on
the LCD screen.
To set the date and time again, touch
(MENU) [Show others] [CLOCK/ LANG]
(under
/
[GENERAL SET] category) [CLOCK SET]. When an item is not on the screen, touch
until the item appears.
Set [SUMMERTIME], date and time, then touch
.
The clock starts.
If you set [SUMMERTIME] to [ON], the clock advances 1 hour.
1GꢂB
Notes
The date and time do not appear during recording, but they are automatically recorded on the recording
media, and can be displayed during playback. To display the date and time, touch
(MENU)
[Show others] [PLAYBACK SET] (under
TIME]
You can turn off the operation beeps by touching
[PLAYBACK] category) [DATA CODE] [DATE/
.
(MENU) [Show others] [SOUND/DISP
SET] (under
[GENERAL SET] category) [BEEP] [OFF]
.
If the button you touch does not react correctly, calibrate the touch panel.
To turn off the power
Close the LCD screen. The (Movie) lamp flashes for a few seconds and the power is turned
off.
Tips
You can turn off your camcorder also by pressing POWER.
When [POWER ON BY LCD] is set to [OFF], turn off your camcorder by pressing POWER.
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
Touch
(MENU) [Show others] [CLOCK/ LANG] (under [GENERAL SET]
category) [ LANGUAGE SET] a desired language
.
GB
1ꢃ
Step 3: Preparing the recording media
The recording media that can be used differs depending on your camcorder. The following
icons are displayed on the screen of your camcorder.
DCR-SXꢂꢃE:
Memory card
DCR-SXꢄꢃE/SXꢆꢃE:
*
Internal memory
Memory card
* In the default setting, both movies and photos are recorded on this recording media. You can perform
recording, playback and editing operations on the selected medium.
Tips
Selecting the recording media for movies (DCR-SX65E/SX85E)
Touch
(MENU) [Show others] [MEDIA SETTINGS] (under
[MANAGE MEDIA] category) [MOVIE MEDIA SET].
The [MOVIE MEDIA SET] screen appears.
Touch the desired recording media.
Touch [YES]
.
The recording medium is changed.
Selecting the recording media for photos (DCR-SX65E/SX85E)
Touch
(MENU) [Show others] [MEDIA SETTINGS] (under
[MANAGE MEDIA] category) [PHOTO MEDIA SET].
The [PHOTO MEDIA SET] screen appears.
Touch the desired recording media.
Touch [YES]
.
The recording medium is changed.
1GꢄB
To check the recording media settings
When recording in movie recording mode or photo recording mode, the recording media
icon is displayed in the top right corner of the screen.
Recording media icon
The icon displayed on the LCD screen varies depending on the camcorder you use.
Inserting a memory card
Notes
Set the recording medium to [MEMORY CARD] to record movies and/or photos on memory card
(DCR-SX65E/SX85E).
Types of memory card that can be used with your camcorder
Only “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media, SD memory cards (Class
2 or faster), SDHC memory cards (Class 2 or faster) and SDXC memory cards (Class 2 or faster) can be
used with this camcorder. Operation with all memory cards is not assured.
“Memory Stick PRO Duo” media of up to 32 GB and SD memory cards of up to 64 GB have been tested
and proven to operate with your camcorder.
For recording movies on “Memory Stick PRO Duo” media, it is recommended that you use “Memory
Stick PRO Duo” media of 512 MB or larger.
In this manual, “Memory Stick PRO Duo” media and “Memory Stick PRO-HG Duo” media are called
“Memory Stick PRO Duo” media and SD memory cards, SDHC memory cards and SDXC memory cards
are called SD memory cards.
Notes
MultiMediaCard cannot be used.
Images recorded on SDXC memory cards cannot be played back or imported on non-exFAT*-compatible
computers, AV components, etc., connected to this camcorder by USB cable. Check that the connected
devices are compatible with exFAT beforehand. If you connect a device that is not compatible with exFAT,
the screen for initialization may appear. Never execute initialization, otherwise all recorded contents will
be lost.
* exFAT is the file system used in SDXC memory cards.
Size of memory cards that can be used with your camcorder
Only “Memory Stick Duo” media that is about a half the size of the standard “Memory Stick” media, and
standard-sized SD memory cards can be used.
GB
1ꢅ
Do not attach a label, etc., to a memory card or memory card adaptor. Doing so may cause a malfunction.
Open the cover, orient the memory card’s notched corner as shown in the
illustration, and insert into the memory card slot until it clicks.
Close the cover after inserting the memory card.
Access lamp
Note direction of notched corner.
The [Create a new Image Database File.] screen may appear if you insert a new memory
card. In that case, touch [YES]. If you record only photos on the memory card, touch
[NO].
Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong
direction, the memory card, memory card slot, or image data may be damaged.
Notes
If [Failed to create a new Image Database File. It may be possible that there is not enough free space.]
is displayed, initialize the memory card by touching
(MENU) [Show others] [MEDIA
FORMAT] (under
[YES] [YES]
[MANAGE MEDIA] category) [MEMORY CARD] (DCR-SX65E/SX85E)
.
To eject the memory card
Open the cover and lightly push the memory card in once.
Do not open the cover during recording.
When inserting or ejecting the memory card, be careful so that the memory card does not pop out and
drop.
Dubbing or copying movies and photos from the internal recording media
to memory card (DCR-SX65E/SX85E)
Touch
(MENU) [Show others] [MOVIE DUB]/[PHOTO COPY] (under
[EDIT] category), then follow the displays on the screen.
1GꢆB
Recording/Playback
Recording
In the default setting, movies are recorded on the following recording media.
DCR-SX45E: Memory card
DCR-SX65E/SX85E: Internal memory
Tips
Fasten the grip belt.
1
Open the LCD screen of your camcorder.
2
Your camcorder is turned on and the lens cover is opened.
You can switch recording modes by pressing MODE. Press MODE to light up the desired recording
mode lamp.
MODE button
(Movie): When
recording a movie
(Photo): When
shooting a photo
GB
1ꢇ
Recording movies
Press START/STOP to start recording.
You can start recording also by touching in the bottom left of the LCD screen.
START/STOP button
[STBY] [REC]
To stop recording, press START/STOP again.
You can stop recording also by touching in the bottom left of LCD screen.
The icons and indicators on the LCD panel will be displayed for about 3 seconds, then disappear after
turning on your camcorder or switching the recording (movie/photo)/playback modes. To display the
icons and indicators again, touch anywhere on the screen except the rec & zoom buttons on the LCD.
Rec & zoom buttons on LCD
about 3sec
after
Notes
If you close the LCD screen while recording movies, the camcorder stops recording.
The maximum continuous recordable time of movies is about 13 hours.
When a movie file exceeds 2 GB, the next movie file is created automatically.
It will take several seconds until you can start recording after you turn on the camcorder. You cannot
operate your camcorder during this time.
The following states will be indicated if data is still being written onto the recording media after recording
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
The media icon in the upper right of the LCD screen is flashing
ꢀG0B
Tips
You can capture photos from recorded movies.
You can check the recordable time, estimated remaining capacity, etc., by touching
(MENU)
[Show others] [MEDIA INFO] (under
[MANAGE MEDIA] category).
The LCD screen of your camcorder can display recording images across the entire screen (full pixel
display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to
[ON], and record images using the outer frame displayed on the screen as a guide.
[ STEADYSHOT] is set to [STANDARD] in the default setting.
To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and
then adjust the angle ().
90 degrees (max.)
90 degrees to
the camcorder
180 degrees (max.)
Data code during recording
The recording date, time and condition are recorded automatically on the recording media.
They are not displayed during recording. However, you can check them as [DATA CODE]
during playback. To display them, touch
(MENU) [Show others] [PLAYBACK
SET] (under
[PLAYBACK] category) a desired setting
.
Shooting photos
In the default setting, photos are recorded on the following recording media.
DCR-SX45E: Memory card
DCR-SX65E/SX85E: Internal memory
Tips
Press MODE to turn on the (Photo) lamp.
The LCD screen display switches for photo recording mode, and the screen aspect ratio
becomes 4:3.
GB
ꢀ1
Press PHOTO lightly to adjust the focus, then press it fully.
You can record photos also by touching
on the LCD screen.
Flashes Lights up
When
disappears, the photo is recorded.
Tips
To change the image size, touch
(MENU) [Show others] [ IMAGE SIZE] (under
[PHOTO SETTINGS] category) a desired setting
.
ꢀGꢀB
Playback
on the camcorder
In the default setting, movies and photos that are recorded on the following recording media
are played.
DCR-SX45E: Memory card
DCR-SX65E/SX85E: Internal memory
Tips
Open the LCD screen of your camcorder.
1
Your camcorder turns on.
Press
(VIEW IMAGES).
2
The VISUAL INDEX screen appears after some seconds.
You can display the VISUAL INDEX screen also by touching
screen.
(VIEW IMAGES) on the LCD
Touch (Movie) () a desired movie () to play back a movie.
Touch the (Photo) () a desired photo () to view a photo.
3
Movies are displayed and sorted by recording date.
Switches operating button display.
To MENU screen
GB
ꢀꢁ
Displays the screen to select the index type ([DATE INDEX]/[ FILM ROLL]/
[
FACE]).
/
/
: Displays movies recorded on the previous/next date.*
: Displays the previous/next movie.
Returns to the recording screen.
* is displayed when is touched.
You can scroll the display by touching and dragging , or .
appears with the movie or photo that was most recently played or recorded. If you touch the
movie or photo with , you can continue playback from the previous time. ( appears on the
photo recorded on a memory card.)
Playing movies
Your camcorder starts playing the selected movie.
Volume adjustment
Previous
Next
OPTION
To stop
To fast-forward
To pause/play
To fast-reverse
Tips
When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX
screen.
Touch
As you repeat touching
/
during pause to play back movies slowly.
during playback, movies are played as fast as about 5 times
/
about 10 times about 30 times about 60 times.
You can display the VISUAL INDEX by touching
(MENU) [Show others] [VISUAL
INDEX] (under
[PLAYBACK] category).
The recording date, time, and shooting conditions are recorded automatically during recording. This
information is not displayed during recording, but you can display it during playback by touching
(MENU) [Show others] [PLAYBACK SET] (under
[PLAYBACK] category)
[DATA CODE] a desired setting
.
To adjust the sound volume of movies
While playing back movies, touch
adjust with
/
.
You can also adjust the sound volume by using
/
in the OPTION MENU.
ꢀGꢂB
Viewing photos
Your camcorder displays the selected photo.
Previous
To start/stop slide show
Next
OPTION
To the VISUAL
INDEX screen
Tips
When viewing photos recorded on a memory card,
(playback folder) appears on the screen.
GB
ꢀꢃ
Playing images on a TV
Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable
or an A/V connecting cable with S VIDEO . Connect your camcorder to the wall
instruction manuals supplied with the devices to be connected.
A/V connecting cable (supplied)
Connecting to another device via the A/V Remote Connector using an A/V connecting cable.
A/V connecting cable with S VIDEO (sold separately)
When connecting to another device via the S VIDEO jack, by using an A/V connecting cable
with an S VIDEO cable (sold separately), higher quality images can be produced than with an
A/V connecting cable. Connect the white and red plugs (left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (sold separately). The
yellow plug connection is not necessary. Connecting only the S VIDEO plug will not output
audio.
IN
VIDEO
(Yellow)
AUDIO
(White)
TVs
(Red)
S VIDEO
VCRs
(Yellow)
Signal flow
A/V Remote Connector
Set the input selector of the TV to the input your camcorder will be
connected to.
For details, refer to the instruction manuals supplied with the TV.
ꢀGꢄB
Connect your camcorder to a TV with the A/V connecting cable (,
supplied) or an A/V connecting cable with S VIDEO (, sold separately).
Connect your camcorder to the input jack of the TV.
Play back movies and photos on your camcorder (p. 23).
To set the aspect ratio according to the connected TV (16:9/4:3)
Touch (MENU) [Show others] [OUTPUT SETTINGS] (under [GENERAL
SET] category) [TV TYPE] [16:9] or [4:3]
.
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (sold separately) to view playback pictures.
TV/VCR
Notes
When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image’s
aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.
On some 4:3 TVs, the photos recorded in 4:3 aspect ratio may not be displayed full screen. This is not a
malfunction.
When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the
16:9 (wide) signal, set [TV TYPE] to [4:3].
Tips
To check information (counter, etc.) on the screen of the monitor, touch
others] [OUTPUT SETTINGS] (under [GENERAL SET] category) [DISP OUTPUT] [V-
OUT/PANEL]
(MENU) [Show
.
GB
ꢀꢅ
Making good use of your camcorder
Deleting movies and
photos
You can free media space by deleting
movies and photos from recording media.
3
4
Touch and display the mark
on the movies or photos to be
deleted.
Notes
You cannot restore images once they are
deleted. Save important movies and photos in
advance.
Do not remove the battery pack or the AC
Adaptor from your camcorder while deleting
the images. It may damage the recording media.
Do not eject memory card while deleting
images from the memory card.
You cannot delete protected movies and photos.
Undo the protection of the movies and photos
to delete them, before you try to delete them.
If the deleted movie is included in the Playlist,
the movie added to the Playlist is deleted also
from the Playlist.
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
Touch
[YES]
.
To delete all movies/photos at one time
In step 2, touch [ DELETE]
Tips
You can delete an image on the playback screen
from
OPTION MENU.
[
DELETE ALL] [YES] [YES]
To delete all images recorded in the recording
media, and recover all the recordable space of
the media, format the media.
Reduced-size images which enable you to view
many images at the same time on an index
screen are called “thumbnails.”
.
To delete all photos at one time, touch
DELETE] [ DELETE ALL] [YES]
[YES]
[
.
To delete all the movies/photos
recorded on the same day at one time
1
2
Touch
(MENU) [Show
Notes
others] [DELETE] (under
You cannot delete photos on memory card by
recording date.
In step 2, touch [ DELETE]
[EDIT] category).
[
DELETE by date].
To delete movies, touch
To delete all photos on the same day at one
time, touch [ DELETE] [ DELETE
by date].
[
DELETE] [ DELETE].
To delete photos, touch [ DELETE]
DELETE].
[
ꢀGꢆB
Touch
date of the desired movies/photos, then
touch
/
to select the recording
.
Touch the image down on the LCD screen
to confirm the image. Touch
return to the previous screen.
to
Touch [YES]
.
GB
ꢀꢇ
Saving movies and photos with a computer
Preparing a computer
You can perform following operations using
“PMB (Picture Motion Browser).”
Importing images to a computer
Viewing and editing imported images
Creating a disc
Others
USB port (this must be provided as standard,
Hi-Speed USB (USB 2.0 compatible)), DVD
burner (CD-ROM drive is necessary for
installation)
Uploading movies and photos to websites
To save movies and photos using a
computer, install “PMB” from the supplied
CD-ROM beforehand.
Macintosh
OS
PMB Portable: Mac OS X*5 (v10.5-v10.6)
*1 Standard installation is required. Operation is
not assured if the OS has been upgraded or in a
multi-boot environment.
Notes
Do not format the media of your camcorder
from a computer. Your camcorder may not
operate correctly.
You can create discs using 12 cm discs of
following type with “PMB.”
DVD-R/DVD+R/DVD+R DL: Unrewritable
DVD-RW/DVD+RW: Rewritable
*2 64-bit editions and Starter (Edition) are not
supported. Windows Image Mastering API
(IMAPI) Ver.2.0 or newer is required to use disc
creation function, etc.
*3 Starter (Edition) is not supported.
*4 Faster processor is recommended.
*5 Macintosh equipped with Intel processor
Step 1 Checking the computer
system
Notes
Operation with all computer environments is
not assured.
Windows
OS*1
When using a Macintosh
Microsoft Windows XP SP3*2/Windows Vista
The supplied software “PMB” is not
supported by Macintosh computers.
To import the movies and photos to the
computer, please contact Apple Inc..
SP2*3/Windows 7
CPU*4
Intel Pentium III 1 GHz or faster
Application
PMB/PMB Portable
Memory
Step 2 Installing the supplied
software “PMB”
256 MB or more
Other system requirements for OS should
be met.
Install “PMB” before connecting your
camcorder to a computer.
Hard disk
Disk volume required for installation:
Approximately 500 MB (5 GB or more may
be necessary when creating DVD discs.)
Notes
If a version of “PMB” under 5.0.00 has been
installed on your computer, you may be
unable to use some functions of those “PMB”
when installing the “PMB” from the supplied
CDROM. Also, “PMB Launcher” is installed
from the supplied CD-ROM and you can start
“PMB” or other software by using the “PMB
Display
Minimum 1,024 dots × 768 dots
ꢁG0B
Launcher.” Double-click the “PMB Launcher”
short-cut icon on the computer screen to start
“PMB Launcher.”
Read the terms of the license
agreement carefully. If you agree
to the terms, change to , and
then click [Next] [Install].
Confirm that your camcorder is
not connected to the computer.
Turn on your camcorder, then
connect the camcorder to the
computer using the supplied USB
cable.
Turn on the computer.
Log on as an Administrator for
installation.
Close all applications running on the
computer before installing the software.
Place the supplied CD-ROM in
the disc drive of your computer.
The installation screen appears.
If the screen does not appear, click
[Start] [Computer] (in Windows
XP, [My Computer]), then double-click
[SONYPMB (E:)] (CD-ROM)*.
* Drive names (such as (E:)) may vary
depending on the computer.
The [USB SELECT] screen appears on
the camcorder screen automatically.
Touch the one of the media types
displayed on the screen to make
the computer recognize your
camcorder.
Click [Install].
[
USB CONNECT]: Internal
memory (DCR-SX65E/SX85E)
[
USB CONNECT]: Memory card
The displayed recording media differ
depending on the model.
If the [USB SELECT] screen does not
appear, touch
(MENU) [Show
others] [USB CONNECT] (under
[OTHERS] category).
Select the country or region.
Click [Continue] on the computer
screen.
Select the language for the
application to be installed, then
proceed to the next screen.
GB
ꢁ1
To disconnect your camcorder from the
computer
Follow the on-screen instructions
to install the software.
Depending on the computer, you may
need to install third party software. If
the installation screen appears, follow
the instructions to install the required
software.
Click the
icon at the bottom right of the
desktop of the computer [Safely remove
USB Mass Storage Device].
Connect the camcorder to the computer
during the installation.
When the installation is completed,
following icons will appear.
Remove the CD-ROM from your
computer.
Touch [END] [YES] on the camcorder
screen.
Disconnect the USB cable.
Notes
Access from the computer using the supplied
software “PMB.” Do not modify the files or
folders on the camcorder from the computer.
The image files may be destroyed or may not be
played back.
When importing a long movie or edited image,
use the supplied software “PMB” If you use any
other software, images may not be imported
properly.
Operation is not guaranteed, if you perform the
above operation.
The maximum file size is 2GB. Should a file
exceed 2 GB, it will be divided automatically.
Although the file may appear to be divided
when viewed on a PC, your camcorder and the
“PMB” importing function will process the file
appropriately.
When you delete image files, follow the steps
camcorder directly from the computer.
Do not copy the files on the recording
media from the computer. Operation is not
guaranteed.
: Starts “PMB.”
: Displays “PMB Help.”
: Displays “PMB Launcher.” “PMB
Launcher” enables you to start “PMB”
or other software, or to open web sites.
Other icons may appear.
No icon may appear depending on the
installation procedure.
Notes
To create discs or use other functions on
Windows XP, Image Mastering API v2.0 for
Windows XP should be installed. If Image
Mastering API v2.0 for Windows XP has not
been installed yet, select it from required
programs on the installation screen and install
it following the procedures displayed. (The
computer must be connected to the internet
for the installation.) You may install Image
Mastering API v2.0 for Windows XP in
response to the message displayed when you try
to start those functions.
ꢁGꢀB
Starting PMB (Picture
Motion Browser)
Using “PMB Portable”
Double-click the “PMB” short-cut icon on
the computer screen.
The application “PMB Portable” is pre-
loaded in this camcorder.
You can easily upload images to a network
service, even with a computer on which
“PMB” is not installed.
You can see the detailed usage when you
click the help button in the upper right after
starting “PMB Portable”.
Notes
If the icon is not displayed on the computer
screen, click [Start] [All Programs]
Starting up “PMB Portable”
(Windows)
[
PMB] to start “PMB.”
You can view, edit, or create discs of movies
and photos using “PMB.”
Turn on your camcorder, then
connect it to a computer with the
Built-in USB cable.
Reading “PMB Help”
The [USB SELECT] screen appears on
the LCD of your camcorder.
For details on how to use “PMB,” read the
“PMB Help.” Double-click the “PMB Help”
short-cut icon on the computer screen to
open the “PMB Help.”
Touch to select the recording
media for which you wish to use
“PMB Portable.”
[
USB CONNECT]: Internal
memory (DCR-SX65E/SX85E)
USB CONNECT]: Memory card
[
If the [USB SELECT] screen does not
appear, touch (MENU) [Show
Notes
others] [USB CONNECT] (under
[OTHERS] category).
If the icon is not displayed on the computer
screen, click [Start] [All Programs]
[PMB] [PMB Help]. You can also open the
“PMB Help” from [Help] of “PMB.”
Click “PMB Portable”.
The User Agreement screen appears.
Configure the settings, following
the instructions on the screen.
“PMB Portable” starts up.
GB
ꢁꢁ
For more details on “PMB Portable,” see the
“PMB Portable” help.
Starting up “PMB Portable”
(Macintosh)
Notes
Always connect to a network when uploading
images using “PMB Portable.”
If [PMB Portable] is not displayed within
the AutoPlay Wizard, click [Computer]
[PMBPORTABLE], then double-click
[PMBP_Win.exe].
Turn on your camcorder, then
connect it to a computer with the
Built-in USB cable.
The [USB SELECT] screen appears on
the LCD of your camcorder.
Touch to select the recording
media for which you wish to use
“PMB Portable.”
[PMBPORTABLE] appears on the
desktop of the computer when
connection between camcorder and
computer is established.
Click [PMBP_Mac] in the
[PMBPORTABLE] folder.
The Region Selection screen appears.
Select the appropriate [Region]
and [Country/Area], and then
click [OK].
The User Agreement screen appears.
Read the agreement carefully.
If you accept the terms of the
agreement, click [I Agree].
“PMB Portable” starts up.
ꢁGꢂB
Saving images with an external device
Saving images in
external media
(DIRECT COPY)
1
Connect the AC Adaptor and the
power cord (mains lead) to the
DC IN jack of your camcorder and
the wall outlet (wall socket).
You can save movies and photos on external
media (USB storage device), such as an
external hard disk drive. You can also play
back images on the camcorder or another
playback device.
2
If the external media has the AC
power cable, connect it to the
wall outlet (wall socket).
Notes
For this operation, you need the USB Adaptor
Cable VMC-UAM1 (sold separately).
The USB Adaptor Cable VMC-UAM1 may not
be available in some countries/regions.
You cannot use the following devices as an
external media.
3
4
Connect the USB Adaptor Cable
to the external media.
media with a capacity exceeding 2 TB
ordinary disc drive such as CD or DVD drive
media connected via USB hub
Connect the USB Adaptor Cable
to the (USB) jack of your
camcorder.
media with built-in USB hub
card reader
You may not be able to use external media with
a code function.
When the [Create a new Image
Database File.] screen appears, touch
[YES].
FAT file system is available for your camcorder.
If the external media was formatted to NTFS
file system, etc., format the external media on
your camcorder before use. The format screen
appears when the external media is connected
to your camcorder. The format screen may
appear even in the case of media utilizing the
FAT file system.
USB Adaptor Cable
VMC-UAM1
(sold separately)
Operation is not assured with every connectable
device.
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC adaptor (p. 13).
Refer to the instruction manual supplied with
the external media.
Refer to the Sony support page for your
country/region for details on external media
that can be used.
You cannot connect to the Built-in USB Cable.
Tips
5
Touch [Copy.] on the camcorder
screen.
You can also import images recorded on
external media using the supplied software
“PMB”.
DCR-SX65E/SX85E:
Movies and photos in the internal
GB
ꢁꢃ
recording media of the camcorder that
have not yet been saved on to external
media can be saved.
DCR-SX45E:
Movies and photos that have not yet
been saved on to external media can
To save desired movies and photos
You can also save images recorded on
memory cards.
Notes
You cannot search or copy photos recorded on
memory card by recording date.
Touch [Play without copying.] in step 5
above.
be saved.
This screen will appear only when there
are newly recorded images.
The VISUAL INDEX screen of the
external media is displayed.
6
After the operation is completed,
Touch
(MENU) [Show others]
touch
on the camcorder
[MOVIE DUB] (when selecting
movies)/[PHOTO COPY] (when
selecting photos).
screen.
Follow the on-screen instructions to
select the recording media (DCR-
SX65E/SX85E) and image selection
methods.
When you selected [DUB by select],
touch the image to be saved.
Notes
The number of scenes you can save on the
external media are as follows.
Movies: 9,999 movies
Photos: 9,999 frames × 899 folders
The number of scenes may be smaller
depending on the type of images recorded.
appears.
When you selected [DUB by date], select
the date of the images to be dubbed with
When connecting an external media
/
, then touch
and go
The images saved in the external media
are displayed on the LCD screen. The
movie display and photo display buttons
on the VISUAL INDEX screen change as
illustrated below.
to step .
Remaining external media capacity
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
By touching date, you can search for
images by date.
You can make menu settings of the external
media such as deleting images. Touch
(MENU) [Show others] on the VISUAL
INDEX screen.
Touch
[YES]
on the
camcorder screen.
ꢁGꢄB
To play back images in the external
media on the camcorder
Touch [Play without copying.] in step 5
above.
The VISUAL INDEX screen of the
external media is displayed.
You can also view images on a TV
connected to your camcorder (p. 26).
Notes
The Date Index of photos cannot be displayed.
If your camcorder does not recognize the
external media, try the following operations.
Reconnect the USB Adaptor Cable to your
camcorder
If the external media has the AC power cable,
connect it to the wall outlet (wall socket)
To finish the external media connection
Touch
screen of the external media.
Disconnect the USB Adaptor Cable.
on the VISUAL INDEX
GB
ꢁꢅ
Creating a disc with a
DVD writer, recorder
Creating a disc with the dedicated
DVD writer, DVDirect Express
Insert an unused disc into the
DVD writer, and close the disc
tray.
You can create a disc or play back the
images on a created disc by using the
dedicated DVD writer, DVDirect Express
(sold separately).
Refer also to the instruction manual
supplied with the DVD writer.
The [DISC BURN] screen appears on
the camcorder screen.
Press
(DISC BURN) on the DVD
writer.
Notes
Movies recorded on the internal
recording media that have not been
saved on any discs will be recorded
onto the disc (DCR-SX65E/SX85E).
Movies that have not been saved on
any discs will be recorded onto the disc
(DCR-SX45E).
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 13).
Only unused discs of the following types can
be used:
12cm DVD-R
12cm DVD+R
The device does not support two-layered discs.
DVDirect Express is referred to as “DVD
writer” in this section.
Repeat steps 3 and 4 when the
total memory size of movies to
be burnt exceeds that of the disc.
Connect the AC Adaptor and the
power cord (mains lead) to the
DC IN jack of your camcorder
and the wall outlet (wall socket)
(p. 13).
Touch
[END] [EJECT
DISC] on the camcorder screen.
Remove the disc after the operation is
completed.
Turn on your camcorder, and
connect the DVD writer to the
(USB) jack of your camcorder with
the USB cable of the DVD writer.
Touch
, then disconnect the
USB cable.
To customize a disc with DISC BURN
OPTION
Perform this operation in the following
cases:
When dubbing a desired image
When creating multiple copies of the same
disc
You cannot connect to the Built-in USB Cable.
When dubbing images in the memory card
(DCR-SX65E/SX85E)
ꢁGꢆB
Touch [DISC BURN OPTION] in step 4.
Select the recording media containing
the movie(s) you want to save (DCR-
SX65E/SX85E).
Touch the movie you want to burn on
the disc.
Turn on your camcorder, and connect
the DVD writer to the (USB) jack of
your camcorder with the USB cable of
the DVD writer.
You can play back movies on the TV
screen by connecting the camcorder to a
TV (p. 26).
appears.
Insert a created disc into the DVD
writer.
The movies on the disc appear as
VISUAL INDEX on the camcorder
screen.
Press the play button on the DVD writer.
You can also operate by the camcorder
screen.
Touch [END] [EJECT DISC] on the
camcorder screen and remove the disc
after the operation is completed.
Remaining Disc capacity
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
By touching date, you can search for
images by date.
Touch
and disconnect the USB
Touch
[YES] on the camcorder
cable.
screen.
Notes
To create another disc of the same
Do not do any of the following when creating
a disc.
Turn off the camcorder
Disconnect the USB cable or the AC adaptor
Subject the camcorder to mechanical shock
or vibration
Eject the memory card from the camcorder
Play the created disc to make sure dubbing was
performed correctly before deleting the movies
on your camcorder.
If [Failed.] or [DISC BURN failed.] appears on
the screen, insert another disc into the DVD
writer and perform the DISC BURN operation
again.
contents, insert a new disc and touch
[CREATE SAME DISC].
After the operation is completed, touch
[EXIT] [END] on the camcorder
screen.
Disconnect the USB cable from your
camcorder.
To play back a disc on the DVD writer
Tips
If the total memory size of movies to be burnt
by the DISC BURN operation exceeds that of
the disc, disc creation stops when the limit is
reached. The last movie on the disc may be
cut off.
Disc creation time to dub movies to the limit
of the disc is about 20 minutes to 60 minutes.
Connect the AC Adaptor and the power
cord (mains lead) to the DC IN jack of
your camcorder and the wall outlet (wall
socket) (p. 13).
GB
ꢁꢇ
It may take more time depending on the
recording mode or the number of scenes.
If you cannot play back created discs on any
DVD player, connect the camcorder to the
DVD writer, and then play back.
Turn on your camcorder, and
connect a DVD writer, etc. to the
(USB) jack of your camcorder
with the Built-in USB Cable.
Creating a disc with a DVD writer,
etc., other than DVDirect Express
You can save movies on a disc by
connecting your camcorder to disc creation
devices, such as a Sony DVD writer other
than DVDirect Express, with the USB
cable. Refer also to the instruction manuals
supplied with the devices to be connected.
Notes
The [USB SELECT] screen appears on
the camcorder screen.
If the [USB SELECT] screen does not
Sony DVD writer may not be available in some
countries/regions.
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 13).
appear, touch
(MENU) [Show
others] [USB CONNECT] (under
[OTHERS] category).
Connect the AC Adaptor and the
power cord (mains lead) to the
DC IN jack of your camcorder
and the wall outlet (wall socket)
(p. 13).
Touch the recording media that
contains the images on the
camcorder screen.
[
USB CONNECT]: Internal
memory (DCR-SX65E/SX85E)
[
USB CONNECT]: Memory card
The displayed recording media differ
depending on the model.
Record movies on the connected
device.
For details, refer to the instruction
manuals supplied with the device to be
connected.
ꢂG0B
After the operation is completed,
touch [END] [YES] on the
camcorder screen.
Disconnect the USB cable.
A/V Remote Connector
Input
Creating a disc with a recorder, etc.
You can dub images played back on your
camcorder on a disc or video cassette,
by connecting your camcorder to a disc
recorder, a Sony DVD writer, etc., other
than DVDirect Express, with the A/V
connecting cable. Connect the device in
either way of or . Refer also to the
instruction manuals supplied with the
devices to be connected.
S VIDEO
VIDEO
(Yellow)
(White)
AUDIO
(Red)
Notes
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 13).
(Yellow)
Sony DVD writer may not be available in some
countries/regions.
Signal flow
A/V connecting cable (supplied)
Connect the A/V connecting cable to the
input jack of another device.
Insert the recording media in the
recording device.
If your recording device has an input
A/V connecting cable with S VIDEO
(sold separately)
selector, set it to the input mode.
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable (supplied) or an A/V
connecting cable with S VIDEO
(sold separately).
Connect your camcorder to the input jacks
of the recording device.
GB
ꢂ1
Start playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals supplied
with your recording device for details.
When dubbing is finished, stop
the recording device, and then
your camcorder.
Notes
Since dubbing is performed via analog data
transfer, the image quality may deteriorate.
To hide the screen indicators (such as a counter,
etc.) on the screen of the monitor device
connected, touch
(MENU) [Show
others] [OUTPUT SETTINGS] (under
[GENERAL SET] category) [DISP
OUTPUT] [LCD PANEL] (the default
setting)
To record the date/time or camera settings data,
touch (MENU) [Show others]
[PLAYBACK SET] (under [PLAYBACK]
category) [DATA CODE] a desired
.
setting
addition, touch
. In
(MENU) [Show
others] [OUTPUT SETTINGS] (under
[GENERAL SET] category) [DISP
OUTPUT] [V-OUT/PANEL]
.
When the screen size of display devices (TV,
etc.) is 4:3, touch (MENU) [Show
others] [OUTPUT SETTINGS] (under
[GENERAL SET] category) [TV TYPE]
[4:3]
.
When you connect a monaural device, connect
the yellow plug of the A/V connecting cable
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.
ꢂGꢀB
Customizing your camcorder
Using menus
Using the menus, you can perform useful functions and change various settings. If you make
good use of menu operations, you can enjoy using your camcorder.
The camcorder has various menu items under each of eight menu categories.
Menu items are described in more details in the “Handycam” Handbook.
Operating menus
/
/
: The menu list moves from category to category.
: The menu list moves through 4 items at once.
You can touch buttons and drag the screen to scroll the list of the menu.
The selected category icon is displayed in orange.
You can return to the MY MENU screen by touching
when displayed.
Touch
.
Touch [Show others] on the MY MENU screen.
See the next page for details on MY MENU.
Touch the central part of the left side of screen to change the display.
Touch the menu item to be changed.
After changing the setting, touch
.
To finish setting the menu, touch
.
To return to the previous menu screen, touch
.
may not be displayed depending on the menu item.
GB
ꢂꢁ
Notes
You may not be able to set some menu items, depending on the recording or playback conditions.
Grayed out menu items or settings are not available.
Tips
Depending on the menu items being changed, your camcorder switches between playback mode and
recording mode (movie/photo).
Using MY MENU
You can use the menu items more easily by registering the menu items you use most often on
MY MENU. You can register 6 menu items on each MY MENU of the MOVIE, PHOTO, and
PLAYBACK.
Example: deleting [SPOT MTR/FCS] and registering [ FADER]
Touch
.
Touch [MY MENU SETTING].
Touch [MOVIE].
Touch [SPOT MTR/FCS].
Touch
Touch [ FADER] (under
When MY MENU is displayed, touch
.
[MANUAL SETTINGS] category).
.
Repeat the same steps above to register menu items on MY MENU, and enjoy using your
“Handycam.”
Tips
When an external storage device is connected, the exclusive MY MENU appears.
ꢂGꢂB
Using the OPTION MENU
The OPTION MENU appears just like the pop-up window that appears when you right-click
the mouse on a computer. When
the OPTION MENU. You touch
appear.
is displayed at bottom-right of the screen, you can use
, and the menu items you can change in the context
Menu item
Tab
Touch
(OPTION).
Touch the desired tab the item to change the setting.
After completing the setting, touch
.
Notes
Grayed out menu items or settings are not available.
When the item you want is not on the screen, touch another tab. (There may be no tab.)
The tabs and items that appear on the screen depend on the recording/playback status of your camcorder
at the time.
GB
ꢂꢃ
Menu lists
(MANUAL SETTINGS) category
SCENE SELECTION .................. Selects an appropriate recording setting according to the type of scene,
such as night view or beach.
FADER.................................... Fades scenes in or out.
WHITE BAL................................. Adjusts the color balance to the brightness of the recording environment.
SPOT MTR/FCS......................... Adjusts the brightness and focus for the selected subject simultaneously.
SPOT METER ............................. Adjusts the brightness of images to a subject you touch on the screen.
SPOT FOCUS............................. Focuses on a subject you touch on the screen.
EXPOSURE ................................. Adjusts the brightness of movies and photos.
FOCUS......................................... Focuses manually.
TELE MACRO............................. Shoots a subject in focus with, the background out of focus.
(SHOOTING SET) category
REC MODE........................... Sets the mode to record movies. When recording fast moving subject, a
high image quality is recommended.
GUIDEFRAME............................ Displays the frame to make sure the subject is horizontal or vertical.
STEADYSHOT...................... Sets the SteadyShot function when recording movies.
AUTO SLW SHUTTR ................ Adjusts the shutter speed automatically.
FACE DETECTION .................... Adjusts the image quality of the face(s) automatically.
AUDIO REC SET
BLT-IN ZOOM MIC.......... Records movies with vivid sound appropriate to the zoom position.
MICREF LEVEL................. Sets the microphone level.
OTHER REC SET
DIGITAL ZOOM......... Sets the maximum zoom level of the digital zoom that exceeds the zoom
level of the optical zoom.
BACK LIGHT..................... Adjusts the exposure for backlit subjects automatically.
WIDE SELECT............. Sets the horizontal to vertical ratio when recording movies.
(PHOTO SETTINGS) category
SELF-TIMER.......................... Sets the self-timer when your camcorder is in photo recording mode.
IMAGE SIZE.......................... Sets the photo size.
FILE NO. ...................................... Sets how to assign the file number.
(PLAYBACK) category
VIEW IMAGES
DATE INDEX..................... Enables searching for desired images by date.
FILM ROLL.................. Displays and plays the scenes by a certain interval.
FACE.............................. Displays and plays the face scenes.
PLAYLIST..................................... Displays and plays the playlist of movies.
PLAYBACK SET
DATA CODE...................... Displays the detailed recording data during playback.
ꢂGꢄB
(EDIT) category
DELETE
DELETE........................ Deletes movies.
DELETE ........................ Deletes photos.
PROTECT
PROTECT..................... Protects movies to avoid deleting.
PROTECT..................... Protects photos to avoid deleting.
DIVIDE................................... Divides movies.
PHOTO CAPTURE* .................. Captures photos from desired scenes of movies.
MOVIE DUB*
DUB by select ................. Selects movies and dub.
DUB by date.................... Dubs all movies of a specified date.
DUB ALL....................... Dubs all saved movies in a playlist.
PHOTO COPY*
COPY by select ............... Selects photos and copy.
COPY by date.................. Copies all photos of a specified date.
PLAYLIST EDIT
ADD.............................. Adds movies in a playlist.
ADD by date.............. Adds movies recorded on a same day at one time in a playlist.
ERASE ........................... Erases movies from a playlist.
ERASE ALL................... Erases all movies from a playlist.
MOVE............................ Changes the order of movies in a playlist.
(OTHERS) category
USB CONNECT
USB CONNECT* ........ Connects the internal memory via USB.
USB CONNECT.......... Connects the memory card via USB.
DISC BURN....................... Allows you to save images onto discs.
BATTERY INFO.......................... Displays the battery information.
(MANAGE MEDIA) category
MEDIA SETTINGS*
MEDIA INFO.............................. Displays information on the recording media, such as free space.
MEDIA FORMAT
INT. MEMORY*................ Deletes all data on the internal memory.
MEMORY CARD.............. Deletes all data on the memory card.
REPAIR IMG.DB F.
GB
ꢂꢅ
(GENERAL SET) category
SOUND/DISP SET
BEEP ................................... Sets whether the camcorder sounds operation beeps or not.
LCD BRIGHT..................... Adjusts the brightness of the LCD screen.
LCD BL LEVEL.................. Adjusts the backlight of the LCD screen.
LCD COLOR...................... Adjusts the color intensity of the LCD screen.
DISPLAY SET.................... Sets the duration that icons or indicators are displayed on the LCD screen.
OUTPUT SETTINGS
DISP OUTPUT.................. Sets whether the on-screen displays appears on the TV screen or not.
CLOCK/ LANG
AREA SET.......................... Adjusts for a time difference without stopping the clock (p. 14).
POWER SETTINGS
POWER ON BY LCD ....... Sets whether or not the camcorder is turned on and off when you open
and close the LCD screen.
OTHER SETTINGS
DEMO MODE................... Sets whether the demonstration appears or not.
CALIBRATION.................. Calibrates the touch panel.
USB LUN SETTING ......... Sets the compatibility of your camcorder when using a USB connection.
* DCR-SX65E/SX85E
ꢂGꢆB
Getting detailed
information from the
“Handycam”Handbook
The “Handycam” Handbook is a user guide
designed to be read on a computer screen.
The “Handycam” Handbook is intended to
be read when you want to know more about
operating your camcorder.
To view the “Handycam” Handbook,
double-click the short-cut icon on the
computer screen.
1
2
To install the “Handycam”
Handbook on a Windows
computer, place the supplied
CD-ROM in the disc drive of your
computer.
When using a Macintosh, open the [Handbook]
– [GB] folder in the CD-ROM, then copy
[Handbook.pdf].
You need Adobe Reader to read “Handycam”
Handbook. If it is not installed on your
computer, you can download it from the Adobe
Systems web page:
Refer to “PMB Help” for details on the supplied
software “PMB” (p. 33).
On the installation screen
displayed, click [Handbook].
3
Select the desired language
and the model name of your
camcorder, then click [Install].
Install by following the
instructions on the screen.
The model name of your camcorder is
printed on its bottom surface.
GB
ꢂꢇ
Additional information
Troubleshooting
If you run into any problems using your
camcorder, follow the steps below.
The camcorder does not operate even
when the power is set to on.
It takes a few seconds for your camcorder to
be ready to shoot after the power is turned on.
This is not a malfunction.
inspect your camcorder.
Disconnect the AC Adaptor from the wall
outlet (wall socket) or remove the battery
pack, then reconnect it after about 1 minute.
If your camcorder still does not work, press
press RESET, all settings, including the clock
setting, are reset.)
The temperature of your camcorder is
extremely high. Turn off the camcorder and
leave it for a while in a cool place.
Remove the power source, attach
the power source again after about 1
minute, and turn the camcorder on.
object, and turn the camcorder on.
If you press RESET, all settings,
including the clock setting, are reset.
The temperature of your camcorder is
extremely low. Leave the camcorder with the
power turned on. If you still cannot operate
your camcorder, turn off the camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
Contact your Sony dealer or local
authorized Sony service facility.
Your camcorder may be required to initialize or
change the current internal recording media of
your camcorder, depending on the problem. In
the event of this, the data stored on the internal
recording media will be deleted. Be sure to
save the data on the internal recording media
on other media (backup) before sending your
camcorder for repair. We will not compensate
you for any loss of internal recording media
data.
During repair, we may check a minimum
amount of data stored on the internal recording
media in order to investigate the problem.
However, your Sony dealer will neither copy
nor retain your data.
Your camcorder gets warm.
Your camcorder may become warm during
operation. This is not a malfunction.
The power abruptly turns off.
Turn on the power again.
Pressing START/STOP or PHOTO does not
record images.
details on the symptoms of your camcorder,
camcorder to a computer.
Press MODE to turn on the
(Photo) lamp.
(Movie) or
Your camcorder is recording the image you
have just shot on the recording media. You
cannot make any new recordings during this
period.
The recording media is full. Delete
unnecessary images (p. 28).
Total number of movie scenes or photos has
exceeded the recordable capacity of your
camcorder. Delete unnecessary images (p. 28).
The power does not turn on.
Attach a charged battery pack to the
camcorder (p. 11).
Connect the plug of the AC Adaptor to the
wall outlet (wall socket) (p. 13).
ꢃG0B
The recording stops.
C:06:
The temperature of your camcorder is
extremely high/low. Turn off your camcorder
and leave it for a while in a cool/warm place.
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: / C:32:
“PMB”cannot be installed.
Remove the power source. Reconnect it and
operate your camcorder again.
Check the computer environment or
installation procedure required to install
“PMB” (p. 30).
E::
“PMB”does not work correctly.
Quit “PMB” and restart your computer.
Battery power is low.
The camcorder is not recognized by the
computer.
Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
Disconnect the USB cable from the computer
and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in an orderly manner.
The temperature of your camcorder is getting
high. Turn off your camcorder and leave it in
a cool place.
Self-diagnosis display/Warning
indicators
The temperature of your camcorder is low.
Make the camcorder warm.
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
When the indicator flashes, there is not
enough free space for recording images. Delete
memory card after storing the images on other
media.
The Image Database File is damaged. Check
C:04:
the data base file by touching
[Show others] [REPAIR IMG.DB F.]
(under [MANAGE MEDIA] category)
the recording medium (DCR-SX65E/SX85E).
(MENU)
The battery pack is not an “InfoLITHIUM”
battery pack V series. Use an “InfoLITHIUM”
battery pack (V series) (p. 11).
Connect the DC plug of the AC Adaptor to
your camcorder securely (p. 11).
GB
ꢃ1
The memory card is damaged. Format the
memory card with your camcorder (p. 47).
Access to the memory card was restricted on
another device.
The camcorder is unsteady. Hold the camcorder
steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
The recording media is full. Delete unnecessary
images (p. 28).
ꢃGꢀB
Recording time of
movies/number of
recordable photos
Playing time
Approximate time available when you use a
fully charged battery pack.
Internal memory
Expected time of recording and
playback with each battery pack
DCR-SX65E/SX85E
Recording time
Approximate time available when you use a
fully charged battery pack.
(unit: minute)
Battery pack
NP-FV30
(supplied)
NP-FV50
NP-FV70
NP-FV100
145
Internal memory
DCR-SX65E/SX85E
(unit: minute)
280
565
1120
Battery pack
Continuous
recording time
Typical recording
time
Memory card
NP-FV30
(supplied)
NP-FV50
NP-FV70
NP-FV100
105
60
(unit: minute)
160
Battery pack
NP-FV30
(supplied)
NP-FV50
NP-FV70
NP-FV100
200
415
830
110
210
375
300
610
1205
Memory card
(unit: minute)
Battery pack
Continuous
recording time
Typical recording
time
Expected recording time of movies
NP-FV30
(supplied)
NP-FV50
NP-FV70
NP-FV100
110
60
Internal memory
DCR-SX65E
215
440
870
120
220
390
(unit: minute)
Recording mode
Recording time
[HQ]
55
(50)
Each recording time is measured when the
REC MODE] is set to SP.
[
Typical recording time shows the time when
you repeat recording start/stop, switching the
MODE lamp, and zooming.
Times measured when using the camcorder at
25 C (77 °F). 10 C to 30 C (50 °F to 86 °F) is
recommended.
[SP]
[LP]
80
(50)
175
(110)
DCR-SX85E
The recording and playback time will be
shorter when you use your camcorder in low
temperatures.
The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
(unit: minute)
Recording time
Recording mode
[HQ]
235
(210)
340
(210)
[SP]
GB
ꢃꢁ
(unit: minute)
Recording time
Expected number of recordable
photos
Recording mode
[LP]
715
(465)
Internal recording media (DCR-SX65E/
SX85E)
Tips
You can record the maximum 9,999 photos.
You can record movies of a maximum of 9,999
scenes.
Memory card
The maximum continuous recording time of
movies is approximately 13 hours.
VGA(0.3M)
Your camcorder uses the VBR (Variable Bit
Rate) format to automatically adjust image
quality to suit the recording scene. This
technology causes fluctuations in the recording
time of the media. Movies containing quickly
moving and complex images are recorded at
a higher bit-rate, and this reduces the overall
recording time.
512MB
1GB
2GB
4GB
8GB
2800
5700
11500
22500
46500
91000
185000
16GB
32GB
Memory card
The indicated number of recordable photos on
a memory card is based on the maximum image
size of your camcorder. The actual number
of recordable photos is displayed on the LCD
screen during recording (p. 59).
The maximum number of recordable photos
on a memory card may vary depending on the
recording conditions.
(unit: minute)
HQ
SP
LP
512MB
1GB
6
(5)
10
(10)
25
(25)
9
(5)
20
(10)
20
(10)
40
(25)
2GB
40
(25)
85
(55)
Tips
You can also use memory card with a capacity
of under 512 MB for recording photos.
The following list shows the average bit-rate, the
recording pixels, and the aspect ratio of each
movie recording mode.
4GB
55
80
170
(50)
(50)
(110)
8GB
115
(100)
230
(205)
465
(415)
165
(100)
330
(205)
670
(415)
350
(225)
690
(445)
1405
(910)
16GB
32GB
HQ: Approx. 9Mbps 720 pixels ×
576 pixels/16:9, 4:3
SP: Approx. 6Mbps 720 pixels ×
576 pixels/16:9, 4:3
LP: Approx. 3Mbps 720 pixels ×
576 pixels/16:9, 4:3
The photo recording pixels and the aspect ratio.
Photo recording mode:
640 dots × 480 dots/4:3
640 dots × 360 dots/16:9
Capturing a photo from a movie:
640 dots × 360 dots/16:9
Notes
The recordable time may vary depending on
the recording and subject conditions, [ REC
MODE] (p. 46).
The number in ( ) is the minimum recordable
time.
640 dots × 480 dots/4:3
ꢃGꢂB
Precautions
On use and care
such as by placing anything heavy on it.
Do not use a deformed or damaged battery
pack.
Do not use or store the camcorder and
accessories in the following locations:
Anywhere extremely hot, cold or humid.
Never leave them exposed to temperatures
above 60 C (140 °F), such as under direct
sunlight, near heaters or in a car parked in
the sun. They may malfunction or become
deformed.
Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
Near strong radio waves or radiation. The
camcorder may not be able to record properly.
Near AM receivers and video equipment.
Noise may occur.
Keep metal contacts clean.
If the battery electrolytic liquid has leaked:
Consult your local authorized Sony service
facility.
Wash off any liquid that may have contacted
your skin.
If any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
When not using your camcorder for a
long time
To keep your camcorder in optimum state for a
long time, turn it on and let it run by recording
and playing back images about once a month.
Use up the battery pack completely before
storing it.
On a sandy beach or anywhere dusty. If
sand or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
Near windows or outdoors, where the LCD
screen or the lens may be exposed to direct
sunlight. This damages the inside of the LCD
screen.
Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories
recommended in these operating instructions.
Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder
gets wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
LCD screen
Do not exert excessive pressure on the LCD
screen, as it may cause damage.
If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
While using your camcorder, the back of
the LCD screen may heat up. This is not a
malfunction.
To clean the LCD screen
If fingerprints or dust make the LCD screen
dirty, it is recommended that you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (sold separately), do not apply the
cleaning liquid directly to the LCD screen. Use
cleaning paper moistened with the liquid.
If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
Avoid rough handling, disassembling,
modifying, physical shock, or impact such
as hammering, dropping or stepping on the
product. Be particularly careful of the lens.
Keep the camcorder turning off when you are
not using your camcorder.
On handling the casing
If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
Avoid the following to avoid damage to the
finish:
Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen
When disconnecting the power cord (mains
lead), pull it by the plug and not the cord (lead).
Do not damage the power cord (mains lead)
GB
ꢃꢃ
Handling the camcorder with above
substances on your hands
Leaving the casing in contact with rubber or
vinyl objects for a long period of time
(See “Getting detailed information from the
the recovery of your data. Also, when you dispose
of the camcorder, it is recommended that you
destroy the actual body of the camcorder.
About care and storage of the lens
Note on disposal/transfer of memory
card
Wipe the surface of the lens clean with a soft
cloth in the following instances:
When there are fingerprints on the lens
surface
In hot or humid locations
When the lens is exposed to salty air such as
at the seaside
Store in a well-ventilated location subject to
little dirt or dust.
To prevent mold, periodically clean the lens as
described above.
Even if you delete data in the memory card or
format the memory card on your camcorder or
a computer, you may not delete data from the
memory card completely. When you give the
memory card to somebody, it is recommended
that you delete data completely using data
deletion software on a computer. Also, when you
dispose of the memory card, it is recommended
that you destroy the actual body of the memory
card.
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed rechargeable
battery to retain the date, time, and other settings
even when the camcorder is turned off. The pre-
installed rechargeable battery is always charged
while your camcorder is connected to the wall
outlet (wall socket) via the AC Adaptor or while
the battery pack is attached. The rechargeable
battery will be fully discharged in about 3 months
if you do not use your camcorder at all. Use
your camcorder after charging the pre-installed
rechargeable battery. However, even if the pre-
installed rechargeable battery is not charged, the
camcorder operation will not be affected as long
as you are not recording the date.
Procedures
Connect your camcorder to a wall outlet (wall
socket) using the supplied AC Adaptor, and leave
it with the LCD screen closed for more than 24
hours.
Note on disposal/transfer of the
camcorder (DCR-SX65E/SX85E)
Even if you delete all movies and still images, or
perform [MEDIA FORMAT], data on the internal
recording media may not be completely erased.
When you transfer the camcorder, it is
recommended that you perform [EMPTY]
ꢃGꢄB
Specifications
1
2
*
When [ STEADYSHOT] is set to
[ACTIVE]
System
Signal format: PAL color, CCIR standards
Movie recording format:
Video: MPEG-2 PS
Audio: Dolby Digital 2ch
Dolby Digital Stereo Creator
*
When [ STEADYSHOT] is set to
[STANDARD] or [OFF]
Input/Output connectors
A/V Remote Connector: Video/audio output jack
USB jack: mini-AB/TypeA (Built-in USB), output
Photo file format
only
: DCF Ver.2.0 Compatible
: Exif Ver.2.21 Compatible
: MPF Baseline Compatible
LCD screen
Picture: 7.5 cm (3 type, aspect ratio 16:9)
Total number of pixels: 230 400 (960 240)
Recording media (Movie/Photo)
Internal memory
DCR-SX65E: 4 GB
DCR-SX85E: 16 GB
General
Power requirements: DC 6.8 V/7.2 V (battery
“Memory Stick PRO Duo” media
pack) DC 8.4 V (AC Adaptor)
SD memory card (Class 2 or faster)
Average power consumption: During camera
recording, using LCD screen at normal
brightness:
When measuring media capacity, 1 GB equals
1 billion bytes, a portion of which is used for
system management and/or application files.
The capacity that a user can use is below.
DCR-SX65E: Approx. 3.86 GB
Internal memory: 1.9 W (DCR-SX65E/
SX85E)
Memory card: 1.8 W
USB charging: DC 5V 500mA
DCR-SX85E: Approx. 15.5 GB
Image device
Operating temperature: 0 C to 40 C (32 °F to
2.25 mm (1/8 type) CCD (Charge Coupled
Device)
104 °F)
Storage temperature: –20 C to + 60 C (-4 °F to
Gross: Approx. 800 000 pixels
Effective (Movie, 16:9): Approx.
490 000 pixels
Effective (Photo, 16:9): Approx. 490 000 pixels
Effective (Photo, 4:3): Approx. 560 000 pixels
+140 °F)
Dimensions (approx.)
52.5 mm 57 mm 113.5 mm (2 1/8 in. ×
2 1/4 in. × 4 1/2 in.) (w/h/d) including the
projecting parts
Lens
52.5 mm 57 mm 123.5 mm (2 1/8 in.
× 2 1/4 in. × 4 7/8 in.) (w/h/d) including
the projecting parts, and the supplied
rechargeable battery pack attached
Carl Zeiss Vario-Tessar
60 (Optical)*1, 70 (Extended)*2, 2 000
(Digital)
Filter diameter: 37 mm (1 1/2 in.)
F1.8 ~ 6.0
Mass (approx.)
230 g (8.1 oz) main unit only
270 g (9.5 oz) including the supplied
rechargeable battery pack and memory card
Focal length:
f=1.8 mm ~ 108 mm (3/32 in. ~ 4 3/8 in.)
When converted to a 35 mm still camera
For movies: 39 mm ~ 2 340 mm (1 9/16 in. ~
92 1/4 in.) (16:9)
For photos: 38 mm ~ 2 280 mm (1 1/2 in. ~
89 7/8 in.) (4:3)
AC Adaptor AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V,
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V*
Color temperature: [AUTO], [ONE PUSH],
[INDOOR] (3 200 K), [OUTDOOR]
(5 800 K)
Operating temperature: 0 C to 40 C (32 °F to
Minimum illumination
104 °F)
3 lx (lux) ([AUTO SLW SHUTTR] is set to [ON]),
6 lx (lux) ([AUTO SLW SHUTTR] is set to
[OFF] (default setting)), shutter speed 1/25
second
Storage temperature: –20 C to + 60 C (-4 °F to
+140 °F)
GB
ꢃꢅ
Dimensions (approx.): 48 mm 29 mm 81 mm
(1 15/16 in. × 1 3/16 in. × 3 1/4 in.) (w/h/d)
excluding the projecting parts
On trademarks
“Handycam” and
are
registered trademarks of Sony Corporation.
Mass (approx.): 170 g (6.0 oz) excluding the
“Memory Stick,” “
,” “Memory Stick Duo,”
,” “Memory Stick PRO
,” “Memory
power cord (mains lead)
“
Duo,” “
* See the label on the AC Adaptor for other
specifications.
Stick PRO-HG Duo,”
“
,” “Memory Stick
Rechargeable battery pack NP-FV30
Maximum output voltage: DC 8.4 V
Output voltage: DC 7.2 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.12 A
Micro,” “MagicGate,” “
,”
“MagicGate Memory Stick” and “MagicGate
Memory Stick Duo” are trademarks or
registered trademarks of Sony Corporation.
“InfoLITHIUM” is a trademark of Sony
Corporation.
Capacity
“DVDirect” is a trademark of Sony
Corporation.
Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
typical: 3.6 Wh (500 mAh)
minimum: 3.6 Wh (500 mAh)
Type: Li-ion
Microsoft, Windows, Windows Vista, and
DirectX are either registered trademarks or
trademarks of Microsoft Corporation in the
United States and/or other countries.
Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
Intel, Intel Core, and Pentium are trademarks
or registered trademarks of Intel Corporation
or its subsidiaries in the United States and other
countries.
Adobe, the Adobe logo, and Adobe Acrobat
are either registered trademarks or trademarks
of Adobe Systems Incorporated in the United
States and/or other countries.
SDXC logo is a trademark of SD-3C, LLC.
MultiMediaCard is a trademark of
MultiMediaCard Association.
Design and specifications of your camcorder and
accessories are subject to change without notice.
Manufactured under license from Dolby
Laboratories.
Charging time
Approximate time (min.) required when you fully
charge a fully discharged battery pack.
AC adaptor
115
Built-in USB Cable*
NP-FV30
(supplied)
155
NP-FV50
NP-FV70
NP-FV100
155
195
390
315
600
1050
Times measured when using the camcorder at
25 C (77 °F). 10 C to 30 C (50 °F to 86 °F) is
recommended.
* When not using the USB connection support
cable
All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies. Furthermore, and
are not mentioned in each case in this manual.
ꢃGꢆB
Quick reference
Screen indicators
Indicator
Meaning
Upper left
Center
Upper right
Estimated recording
remaining time
[00min]
FADER
Approximate number of
recordable photos and
recording media
9999
9999
Playback folder of
memory card
Bottom
Current playing movie or
photo/Number of total
recorded movies or photos
100/112
Upper left
Indicator
Meaning
MENU button
Bottom
Indicator
Self-timer recording
MICREF LEVEL low
WIDE SELECT
Meaning
[FACE DETECTION] set
to [OFF]
Manual focus
BLT-IN ZOOM MIC
Remaining battery
60 min
Recording folder of
memory card
SCENE SELECTION
VIDEO LIGHT
Return button
White balance
SteadyShot off
SPOT MTR/FCS / SPOT
METER / EXPOSURE
Center
Indicator
Meaning
TELE MACRO
BACK LIGHT
[STBY]/[REC]
Recording status
Photo size
Slide show set
INTELLIGENT AUTO
OPTION button
Warning
VIEW IMAGES button
Playback mode
Slide show button
Data file name
Upper right
101-0005
Indicator
Meaning
Protected image
Recording mode (HQ/
SP/LP)
Index button
Recording/playback/
editing media
Counter (hour:minute:
second)
Indicators and their positions are approximate
and may differ from what you actually see.
Some indicators may not appear, depending on
your camcorder model.
0:00:00
GB
ꢃꢇ
Parts and controls
Figures in ( ) are reference pages.
(VIEW IMAGES) button (23)
POWER button (14)
LIGHT button
Press to light up the LIGHT.
iAUTO button
Speaker
Power zoom lever
PHOTO button (22)
MODE button (19)
(movie)/ (photo) lamp (19)
RESET button
Press RESET using a pointed object.
Press RESET to initialize all the settings
including the clock setting.
Lens (Carl Zeiss lens)
LED VIDEO LIGHT
Built-in microphone
LCD screen/Touch panel
If you rotate the LCD panel 180 degrees, you
can close the LCD panel with the LCD screen
facing out. This is convenient during playback
operations.
Battery pack (11)
START/STOP button (20)
CHG (charge) lamp (11)
A/V Remote Connector (26)
ꢄG0B
Access lamp (memory card) (17)
While the lamp is lit or flashing, the
camcorder is reading or writing data.
Memory card slot (17)
Built-in USB Cable
Tripod receptacle
Attach a tripod (sold separately) to the
tripod receptacle using a tripod screw (sold
separately: the length of the screw must be less
than 5.5 mm (7/32 in.)).
BATT (battery) release lever (12)
GB
ꢄ1
Index
Symbols
M
T
16:9 ...............................................27
4:3 .................................................27
Maintenance................................55
MEDIA SETTINGS....................16
Memory card...............................17
“Memory Stick PRO Duo” media
.......................................................17
Tripod...........................................61
Troubleshooting..........................50
TV.................................................26
A
A/V connecting cable...........26, 41
B
Menus.....................................43, 46
MOVIE MEDIA SET .................16
Movies....................................20, 23
Battery pack.................................11
U
USB cable...............................38, 40
USB CONNECT...................38, 40
C
Care ..............................................55
Charging the battery pack abroad
.......................................................13
CLOCK SET................................14
Computer.....................................30
Computer system........................30
Creating a disc ............................38
V
VBR ..............................................53
VIEW IMAGES ..........................23
VISUAL INDEX .........................23
O
Operation beeps..........................15
Operation flow..............................8
OPTION MENU ........................45
W
P
Warning indicators.....................51
Windows......................................30
PHOTO MEDIA SET ................16
Photos ....................................21, 23
Playback.......................................23
D
PMB (Picture Motion Browser)
.................................................30, 33
DATA CODE ..............................15
DATE/TIME................................15
DELETE.......................................28
Disc recorder...............................41
DVDirect Express.......................38
DVD writer............................38, 40
Z
Zoom............................................20
R
Rec & zoom buttons on LCD....20
Recording ....................................20
Recording media.........................16
Recording time of movies/
number of recordable photos....53
E
External media............................35
F
Repair...........................................50
Fully charged...............................11
H
S
“Handycam” Handbook.............49
Saving images in external media
.......................................................35
I
Screen indicators ........................59
Self-diagnosis display.................51
Setting the date and time...........14
Software .......................................30
Specifications ..............................57
Supplied items...............................5
Install............................................30
Internal memory.........................16
You will find the menu lists
L
ꢄGꢀB
Additional information on this product and
answers to frequently asked questions can
be found at our Customer Support Website.
2011 Sony Corporation
Printed in China
|