Sony DISC BDP SX1000 User Manual

4-264-055-11(1)  
Preparations  
Portable Blu-ray  
Playback  
Disc™ / DVD Player  
Settings and Adjustments  
Additional Information  
Operating Instructions  
BDP-SX1000  
This symbol is  
intended to alert the  
user to the presence  
of uninsulated  
“dangerous voltage”  
b
This equipment has been tested  
and found to comply with the  
limits for a Class B digital  
device, pursuant to Part 15 of the  
FCC Rules. These limits are  
designed to provide reasonable  
protection against harmful  
interference in a residential  
installation. This equipment  
generates, uses, and can radiate  
radio frequency energy and, if  
not installed and used in  
accordancewiththe instructions,  
may cause harmful interference  
to radio communications.  
However, there is no guarantee  
that interference will not occur  
in a particular installation. If this  
equipment does cause harmful  
interference to radio or  
WARNING  
To reduce the risk of fire or electric  
shock, do not expose this apparatus  
to rain or moisture.  
within the product’s enclosure that  
may be of sufficient magnitude to  
constitute a risk of electric shock to  
persons.  
To avoid electrical shock, do not  
open the cabinet. Refer servicing to  
qualified personnel only.  
This symbol is  
intended to alert the  
user to the presence  
of important  
operating and  
The AC power cord must be  
changed only at a qualified service  
shop.  
maintenance (servicing)  
instructions in the literature  
accompanying the appliance.  
Batteries or batteries installed  
apparatus shall not be exposed to  
excessive heat such as sunshine,  
fire or the like.  
Precautions  
• To prevent fire or shock hazard,  
do not place objects filled with  
liquids, such as vases, on the  
apparatus.  
• Install this unit so that the AC  
power cord can be unplugged  
from the wall socket  
CAUTION  
The use of optical instruments with  
this product will increase eye  
hazard. As the laser beam used in  
this Blu-ray Disc/DVD player is  
harmful to eyes, do not attempt to  
disassemble the cabinet.  
television reception, which can  
be determined by turning the  
equipment off and on, the user is  
encouraged to try to correct the  
interference by one or more of  
the following measures:  
– Reorient or relocate the  
receiving antenna.  
– Increase the separation  
between the equipment and  
receiver.  
– Connect the equipment into an  
outlet on a circuit different  
from that to which the receiver  
is connected.  
– Consult the dealer or an  
experienced radio/TV  
immediately in the event of  
trouble.  
Refer servicing to qualified  
personnel only.  
• The player is not disconnected  
from the AC power source as  
long as it is connected to the wall  
outlet, even if the player itself  
has been turned off.  
This label is located on the bottom  
of the unit.  
FCC WARNING  
You are cautioned that any  
changes or modifications not  
expressly approved in this  
manual could void your  
authority to operate this  
equipment.  
technician for help.  
The shielded Interface cable  
(LAN cable) must be used with  
the equipment in order to  
comply with the limits for a  
digital device pursuant to  
Subpart B of Part 15 of FCC  
Rules.  
Owner’s Record  
The model and serial numbers are  
located at the bottom of the unit.  
Record the serial number in the  
space provided below. Refer to  
them whenever you call upon your  
Sony dealer regarding this product.  
Model No.______________  
Serial No.______________  
If this product is not working  
properly, please call 1-866-909-  
7669.  
2
 
14)Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus  
has been damaged in any way,  
such as power-supply cord or  
plug is damaged, liquid has  
been spilled or objects have  
fallen into the apparatus, the  
apparatus has been exposed to  
rain or moisture, does not  
operate normally, or has been  
dropped.  
• Do not use solvents such as  
benzine, thinner,  
Important Safety  
Instructions  
commercially available disc/  
lens cleaners, or anti-static  
spray intended for vinyl LPs.  
• If you have printed the disc’s  
label, dry the label before  
playing.  
• Do not use the following discs.  
– A lens cleaning disc.  
– A disc that has a non-  
standard shape (e.g., card,  
heart).  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near  
water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation  
openings. Install in accordance  
with the manufacturer’s  
instructions.  
8) Do not install near any heat  
sources such as radiators, heat  
registers, stoves, or other  
apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety  
purpose of the polarized or  
grounding-type plug. A  
polarized plug has two blades  
with one wider than the other.  
A grounding type plug has two  
blades and a third grounding  
prong. The wide blade or the  
third prong are provided for  
your safety. If the provided  
plug does not fit into your  
outlet, consult an electrician for  
replacement of the obsolete  
outlet.  
Do not take apart or remodel the  
player. Doing so can result in  
electric shock. Consult your  
nearest Sony dealer or Sony  
Service Center for exchange of  
rechargeable batteries, internal  
checks or repair.  
– A disc with a label or sticker  
on it.  
– A disc that has cellophane  
tape or sticker adhesive on it.  
Notes About the Discs  
• To keep the disc clean, handle  
the disc by its edge. Do not  
touch the surface.  
Dust, fingerprints, or scratches  
on the disc may cause it to  
malfunction.  
• Do not resurface the playing  
side of a disc to remove  
surface scratches.  
10)Protect the power cord from  
being walked on or pinched  
particularly at plugs,  
convenience receptacles, and  
the point where they exit from  
the apparatus.  
11)Only use attachments/  
accessories specified by the  
manufacturer.  
• Do not expose the disc to  
direct sunlight or heat sources  
such as hot air ducts, or leave it  
in a car parked in direct  
sunlight as the temperature  
may rise considerably inside  
the car.  
12)Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use caution  
when moving the cart/  
apparatus combination to avoid  
injury from tip-over.  
• After playing, store the disc in  
its case.  
• Clean the disc with a cleaning  
cloth. Wipe the disc from the  
center out.  
13)Unplug this apparatus during  
lightning storms or when  
unused for long periods of  
time.  
3
On temperature increases  
Heat may build up inside the  
player during charging or if it is  
being used for a long time. This  
is not a malfunction.  
On operation  
• If the player is brought directly  
from a cold to a warm location,  
or is placed in a very damp  
room, moisture may condense  
on the lenses inside the player.  
Should this occur, the player  
may not operate properly. In  
this case, remove the disc and  
leave the player for about half  
an hour until the moisture  
evaporates. Wipe off moisture  
attached to the LCD surface  
with tissue etc. Turn on the  
power again later.  
Precautions  
Road safety  
Do not use the monitor unit and  
headphones while driving,  
cycling, or operating any  
motorized vehicle. Doing so  
may create a traffic hazard and is  
illegal in some areas. It can also  
be potentially dangerous to play  
your headsets at high volume  
while walking, especially at  
pedestrian crossings. You  
should exercise extreme caution  
or discontinue use in potentially  
hazardous situations.  
On placement  
• Do not place the player in a  
confined space such as a  
bookshelf or similar unit.  
• Do not cover the ventilation of  
the player with newspapers,  
tablecloths, curtains, etc. And  
do not place the player on a  
soft surface, such as a rug.  
• Do not place the player and  
adaptors in a location near heat  
sources, or in a place subject to  
direct sunlight, excessive dust,  
sand, moisture, rain, or  
• Keep the lens on the player  
clean and do not touch it.  
Touching the lens may  
damage the lens and cause the  
player to malfunction. Leave  
the disc lid closed except when  
you insert or remove discs.  
• Do not use the player in an  
area subject to excessive dust  
or cigarette smoke. Dust build-  
up or cigarette smoke residue  
on internal components such  
as the lens may cause the  
player to malfunction.  
On safety  
mechanical shock, or in a car  
with its windows closed.  
• Do not place the player in an  
inclined position. It is  
designed to be operated in a  
horizontal position only.  
• Keep the player and discs  
away from equipment with  
strong magnet, such as  
microwave ovens, or large  
loudspeakers.  
• Do not drop or apply strong  
shock.  
Should any solid object or liquid  
fall into the cabinet, unplug the  
player and have it checked by  
qualified personnel before  
operating it any further.  
On power sources  
• If you are not going to use the  
player for a long time, be sure  
to disconnect the player from  
the wall outlet. To disconnect  
the AC power cord, grasp the  
plug itself; never pull the cord.  
• Do not touch the AC power  
cord or the AC adaptor with  
wet hands. Doing so may  
cause shock hazard.  
On Liquid Crystal Display  
• Although manufactured with  
high precision technology, the  
LCDmay occasionally display  
dots of various colors. That is  
not a malfunction.  
• Do not place or drop any  
object onto the LCD surface.  
Also, do not apply pressure  
from hands or elbows.  
Do not place heavy objects on  
the player and accessories.  
• Use a commercially available  
AC plug adaptor, if necessary,  
depending on the design of the  
wall outlet.  
• Do not damage the LCD  
surface with a sharp edged  
tool.  
AC power cord  
Wall  
outlet  
(supplied)  
AC plug adaptor  
(not supplied)  
• Do not connect the AC power  
cord to a traveler’s electric  
transformer, which may  
generate heat and cause a  
malfunction.  
4
   
On rechargeable battery  
• Because of the battery’s  
limited life, its capacity  
gradually deteriorates over  
time and repeated use.  
Exchange a new one for the  
old one when the battery holds  
about only half the normal  
period.  
On headphones  
On cleaning discs, disc/  
lens cleaners  
Do not use cleaning discs or  
disc/lens cleaners (including wet  
or spray types). These may cause  
the apparatus to malfunction.  
• Preventing hearing damage:  
Avoid using headphones at  
high volumes. Hearing experts  
advise against continuous,  
loud, and extended play. If you  
experience a ringing in your  
ears, reduce the volume or  
discontinue use.  
On replacement of parts  
In the events that this player is  
repaired, repaired parts may be  
collected for reuse or recycling  
purposes.  
• To prevent battery  
• Showing consideration for  
others: Keep the volume at a  
moderate level. This will allow  
you to hear external sounds  
and still be considerate to the  
people around you.  
deterioration, charge the  
battery at least once every half  
a year or every year.  
• Certain countries may regulate  
disposal of the battery used to  
power this product. Please  
consult with your local  
authority.  
On connecting to the HDMI  
OUT jack  
Observe the following as  
improper handling may damage  
the HDMI OUT jack and the  
connector.  
• Carefully align the HDMI  
OUT jack on the right of the  
player and the HDMI  
connector by checking their  
shapes. Make sure the  
connector is not upside down  
or tilted.  
On cleaning  
• Clean the cabinet, panel, and  
controls with a soft cloth  
slightly moistened with a mild  
detergent solution. Do not use  
any type of abrasive pad,  
scouring powder or solvent  
such as alcohol or benzine.  
• Wipe the LCD surface with the  
soft dry cloth lightly. To  
prevent dirt buildup, wipe it  
frequently.  
On AC adaptor and car  
battery adaptor  
• Use the supplied adaptors for  
the player, as other adaptors  
may cause a malfunction.  
• Do not disassemble or reverse-  
engineer.  
• Do not touch the metal parts,  
as it may cause a short and  
damage the adaptors,  
especially if touched by other  
metal objects.  
Do not wipe the LCD surface  
with a wet cloth. If water  
enters, a malfunction may  
result.  
• If picture/sound is distorted,  
the lens may be covered with  
dust. In this case, use a  
commercially-available  
blower brush for camera  
lenses to clean the lens.  
Avoid touching the lens  
directly during cleaning.  
On adjusting volume  
Do not turn up the volume while  
listening to a section with very  
low level inputs or no audio  
signals. If you do, the speakers  
may be damaged when a peak  
level section is played.  
• Be sure to disconnect the  
HDMI cable when moving the  
player.  
• Hold the HDMI connector  
straight when connecting or  
disconnecting the HDMI  
cable. Do not twist or force the  
HDMI connector into the  
HDMI OUT jack.  
,continued  
5
IMPORTANT NOTICE  
Caution: This player is  
capable of holding a still  
video image or on-screen  
display image on your  
television screen  
indefinitely. If you leave the  
still video image or on-  
screen display image  
displayed on your TV for an  
extended period of time you  
risk permanent damage to  
your television screen.  
Plasma display panel  
televisions and projection  
televisions are susceptible to  
this.  
If you have any questions or  
problems concerning your  
player, please consult your  
nearest Sony dealer.  
6
Table of Contents  
7
A LCD panel  
Guide to Parts and  
Controls  
B VOLUME (sound volume) +/–  
Adjusts the volume.  
C Remote sensor  
The main remote sensor is located next to  
the HOLD indicator. The sub remote  
sensor is located at the lower left side of  
the LCD panel.  
Player  
The available functions of the player and  
remote differ depending on the disc or the  
situation.  
D N (play)  
Starts or re-starts playback.  
X (pause)  
Pauses or re-starts playback.  
x (stop)  
Stops playback and remembers the stop  
point (resume point).  
The resume point for a title/track is the  
last point you played or the last photo for  
a photo folder.  
./> (previous/next)  
Skips to the previous/next chapter, track,  
or file.  
Hold down ./> on the player to  
reverse/fast forward (1 level only).  
E HOME  
Enters the player’s home menu.  
Displays the wallpaper when pressed on  
the category icon of the home menu.  
TOP MENU  
Opens or closes the BD’s or DVD’s Top  
Menu.  
POP UP/MENU  
Opens or closes the BD-ROM’s Pop-up  
Menu, or the DVD’s menu.  
The options menu that can be selected  
appears on the screen.  
RETURN  
Returns to the previous display.  
z
The VOLUME + and N (play) buttons have a  
tactile dot. Use the tactile dot as a reference when  
operating the player.  
</M/m/,  
Moves the highlight to select a displayed  
item.  
ENTER (center button)  
Enters the selected item.  
Displays the playback information on the  
screen.  
8
             
G SOUND  
Switches among 4 different sound modes  
Remote  
each time pressed.  
This function is available for the sound  
output from the player’s speaker.  
H Speaker  
I Disc lid  
J OPEN button  
Opens the disc lid.  
K PUSH CLOSE  
Closes the disc lid.  
L POWER indicator  
Lights up when the player is turned on.  
M CHARGE indicator  
Lights up when charging the  
rechargeable battery.  
Flashes when the battery is empty.  
N HOLD indicator  
Lights up when the ?/1/HOLD switch is  
set in the direction of HOLD.  
O ?/1 (on/standby)/HOLD switch  
• Turns on the player, or sets to standby  
mode.  
• To avoid accidental button operation of  
the player, set the switch in the  
direction of HOLD. All the buttons on  
the player are locked, while the buttons  
on the remote remain operable.  
z
P PHONES (headphones) jack A, B  
Number 5, AUDIO, VOL +, and N PLAY buttons  
have a tactile dot. Use the tactile dot as a reference  
when operating the player.  
Q
(USB) jack  
Connect a USB device to this jack.  
W Number buttons (0 - 9)  
R AUDIO IN/OUT jack  
S VIDEO IN/OUT jack  
T HDMI OUT jack  
Enters the title/chapter numbers, etc.  
Selects the language track when multi-  
lingual tracks are recorded on BD-  
ROMs/DVD VIDEOs.  
U LAN (100) terminal  
V DC IN 14.3V jack  
Connect the AC adaptor or car battery  
adaptor.  
Selects the sound track on CDs.  
Selects the subtitle language when multi-  
lingual subtitles are recorded on BD-  
ROMs/DVD VIDEOs.  
X Color buttons (YELLOW/BLUE/  
RED/GREEN)  
Shortcut keys for interactive functions.  
,continued  
9
           
Y m/M (fast reverse/fast  
forward)  
Rotating and Folding  
Down the LCD Panel  
• Fast reverses/fast forwards the disc  
when pressed during playback. Each  
time you press the button during  
playback of videos, the search speed  
changes.  
Open the LCD panel to the vertical position,  
then slowly rotate it 180 degrees.  
• Plays in slow motion, when pressed for  
more than one second in pause mode.  
This function is available when the  
remote is pointed at the main remote  
sensor.  
• Plays one frame at a time, when pressed  
briefly in pause mode.  
Z
/
(replay/advance)  
After rotating the LCD panel 180 degrees  
clockwise, push the LCD panel down onto  
the main body of the player. In this position  
the panel is facing up.  
Briefly replays the current scenes for  
10 seconds/briefly fast forwards the  
current scenes for 15 seconds.  
wj [/1 (on/standby)  
Turns on the player, or sets to standby  
mode.  
Home menu display  
To return the LCD panel to its original  
position  
Open the LCD panel to the vertical position  
and slowly rotate the LCD panel counter-  
clockwise.  
The home menu appears when you press  
HOME. Select a category using </,.  
Select an item using M/m, and press ENTER.  
Item  
Category  
b
Return the LCD panel to its original position after  
use, so the LCD panel will not be damaged by  
sudden shocks or rough treatment.  
(Setup): Adjusts the player settings.  
(Photo): Displays photos.  
(Music): Plays music.  
(Video): Plays videos.  
(Input): Plays videos/music/photos from  
other equipment.  
10  
 
Charging the  
Preparations  
Rechargeable Battery  
Checking the Supplied  
Accessories  
Charge the rechargeable battery before using  
the player for the first time, or when the  
battery is depleted.  
Check that you have the following items:  
• AC power cord (1)  
• AC adaptor (1)  
Connect the AC adaptor.  
When charging begins, the CHARGE  
indicator lights up in orange.  
• Car battery adaptor (1)  
• Audio/video cable (mini plug × 2 y  
phono plug × 3) (1)  
• Remote commander (remote) (1)  
• Size AA (R6) batteries (2)  
To prepare the remote  
Insert two Size AA (R6) batteries by  
matching the 3 and # ends on the batteries  
to the markings inside the battery  
compartment.  
To a wall outlet  
AC adaptor  
(supplied)  
AC power cord  
(supplied)  
When charging ends, the CHARGE indicator  
lights off.  
Disconnect the AC adaptor.  
z
Charging takes longer if the player is turned on.  
When you only want to charge the battery, turn off  
the player.  
b
Charge the battery in an ambient temperature of  
between 5°C (41°F) and 35°C (95°F).  
Charging time and playing time  
Charging time: approx. 5 hours  
Playing time: approx. 5 hours  
Times indicated are under the following  
conditions:  
• Charging time  
– moderate temperature (20°C (68°F))  
– power-off  
• Playing time  
– moderate temperature (20°C (68°F))  
– headphone use  
– backlight set to minimum  
Depending on the ambient temperature or  
rechargeable battery condition, charging time  
may be longer, or playing time may be  
reduced.  
,continued  
11  
             
To check the battery level  
When the player is stopped, the battery  
indicator is displayed. When the battery is  
Using the Car Battery  
Adaptor  
empty,  
is displayed or the CHARGE  
indicator flashes.  
The car battery adaptor is for a 12V car  
battery, negative earth (do not use it with a  
24V car battery, positive earth).  
Full  
Empty  
Connect the car battery adaptor.  
To cigarette  
lighter socket  
Car battery adaptor  
(supplied)  
After using the player in a car  
Disconnect the car battery adaptor from the  
cigarette lighter socket.  
b
• The driver should not connect or disconnect the  
car battery adaptor while driving.  
• Arrange the cord so as not to interfere with the  
driver. Also, do not place the LCD panel where  
the driver can watch.  
• Clean the cigarette lighter socket. If dirty, the  
cigarette lighter socket may cause contact failure  
or malfunction.  
• Use the car battery adaptor with the car engine  
running. If it is used with the car engine off, the  
car battery may become depleted.  
• Do not leave the player or accessories in the car.  
12  
 
Connecting to the  
Network  
Connecting to Other  
Equipment  
Use a LAN cable to connect to the LAN (100)  
terminal on the player.  
By connecting the player to your TV or other  
equipment, you can increase your viewing  
options.  
b
• Refer to the instruction manual supplied with the  
equipment to be connected.  
• Before connecting, turn off the player and the  
equipment to be connected, then unplug them  
from their wall sockets.  
Enjoying images on a  
connected TV  
LAN cable (not supplied)  
1 Connect the player to your TV or  
monitor using the audio/video or  
HDMI cable.  
Broadband  
router  
ADSL modem/  
Cable modem  
Internet  
To set the network settings  
Select “Network Settings,” “Internet  
Settings,” then “Wired Setup” (page 23), and  
follow the on-screen instructions to complete  
the setup.  
HDMI cable  
(not supplied)  
or  
To HDMI input jack  
of a TV or monitor  
Audio/video cable  
(supplied)  
To AUDIO/VIDEO input jacks  
of a TV or monitor  
2 Turn on the player.  
For HDMI connections, check the  
“HDMI/LCD Video Format” settings in  
the “Screen Settings” setup (page 20).  
,continued  
13  
       
z
• The player can connect to an AV amplifier in the  
same way as a TV.  
• Use an HDMI cable to enjoy high quality digital  
pictures and sound.  
b
• Do not connect the player through a VCR. Video  
signals fed through VCRs may be affected by  
copyright protection systems and the picture will  
be distorted on the television.  
• No sound is output from the player’s speaker  
when connecting with an HDMI cable.  
Enjoying images output from  
other equipment on the  
player’s LCD screen  
1 Connect the player to your video  
player or camcorder using the audio/  
video cable.  
To AUDIO/VIDEO  
output jacks of a video  
player or camcorder  
Audio/video cable  
(supplied)  
2 Turn on the player.  
3 Select  
(Input) on the home menu  
using </,, and press ENTER.  
To return to the home menu  
Press HOME.  
14  
Enjoying BONUSVIEW/BD-LIVE  
Playback  
Some BD-ROMs with the “BD-LIVE” logo*  
have bonus content and other data that can be  
downloaded for enjoyment.  
Playing a Disc  
*
For playable discs, see “Playable discs”  
1 Connect a USB memory to the USB  
jack on the player (page 9).  
As your local storage, use a 1 GB or  
larger USB memory.  
1 Open the LCD panel, and turn on the  
player.  
2 Press OPEN to open the disc lid, and  
2 Prepare for BD-LIVE (BD-LIVE only).  
• Connect the player to a network  
place the disc.  
Place with the playback side down and  
push gently until it clicks. Do not touch  
the lens surface.  
• Set “BD Internet Connection” to  
“Allow” (page 22).  
3 Insert a BD-ROM with BONUSVIEW/  
BD-LIVE.  
The operation method differs depending  
on the disc. Refer to the instruction  
manual supplied with the disc.  
z
Lens  
Playing side facing  
down  
To delete data in the USB memory, select “Erase  
BD Data” in the  
(Video), and press ENTER.  
All data stored in the buda/budb folder will be  
erased.  
3 Close the disc lid.  
Playback starts.  
If playback does not start automatically,  
select  
or  
in the  
(Video),  
(Music),  
(Photo) category, and press  
ENTER.  
,continued  
15  
       
Displaying the playback  
information  
Playing from a USB  
Device  
You can check the playback information,  
etc., by pressing DISPLAY.  
The displayed information differs depending  
on the disc type and player status.  
You can play video/music/photo files on the  
connected USB device.  
For playable USB devices, see “Playable  
Example: when playing a BD-ROM  
1 Connect the USB device to the USB  
jack on the player.  
Refer to the instruction manual supplied  
with the USB device before connecting.  
USB device  
A The currently selected angle  
B Title number or name  
2 Select  
(Photo) on the home menu using  
</,.  
(Video),  
(Music), or  
C The currently selected audio setting  
D Available functions (  
audio, subtitle,  
status)  
angle,  
battery  
3 Select  
(USB device) using M/m,  
and press ENTER.  
E Displays the Play mode, Playing status  
bar, Disc type, Video codec, Bitrate,  
Repeat type, Elapsed time, and Total  
playing time.  
F Chapter number  
16  
     
(Video) only  
Available Options  
Item  
Details  
A/V SYNC  
Adjusts the gap between  
picture and sound, by  
delaying the sound output in  
relation to the picture output  
(0 to 120 milliseconds).  
Various settings and playback operations are  
available by pressing OPTIONS. The  
available items differ depending on the  
situation.  
Pause  
Pauses the playback.  
Common options  
Top Menu  
Displays the BD’s or DVD’s  
Top Menu.  
Item  
Details  
Menu/Popup Displays the BD-ROM’s  
LCD Mode  
• LCD Aspect: Changes the  
picture size.  
• Backlight: Adjusts the  
brightness.  
• Contrast: Adjusts the  
difference between light  
and dark areas.  
• Hue: Adjusts the red and  
green color balance.  
• Color: Adjusts the richness  
of colors.  
Menu  
Pop-up Menu or DVD’s  
menu.  
Title Search  
Searches for a title on BD-  
ROMs/DVD VIDEOs and  
starts playback from the  
beginning.  
Chapter  
Search  
Searches for a chapter and  
starts playback from the  
beginning.  
• Default: Returns all  
settings to the factory  
defaults.  
Angle  
Switches to other viewing  
angles when multi-angles  
are recorded on BD-ROMs/  
DVD VIDEOs.  
Repeat  
Setting  
Sets the repeat mode.  
Audio  
Switches the language track  
when multi-lingual tracks  
are recorded on BD-ROMs/  
DVD VIDEOs.  
Play/Stop  
Starts or stops the playback.  
Play from  
beginning  
Plays the item from the  
beginning.  
Subtitle  
Switches the subtitle  
languagewhen multi-lingual  
subtitles are recorded on  
BD-ROMs/DVD VIDEOs.  
(Music) only  
Item  
Details  
Add  
Slideshow  
BGM  
Registers music files in the  
USB memory as slideshow  
background music (BGM).  
,continued  
17  
     
(Photo) only  
Item  
Details  
Slideshow  
Speed  
Changes the slideshow  
speed.  
Slideshow  
Effect  
Sets the effect for  
slideshows.  
Slideshow  
BGM  
• Off: Turns off the  
function.  
• My Music from USB: Sets  
the music files registered  
in “Add Slideshow BGM.”  
If no music file is  
registered, “(Not  
registered)” is displayed.  
• Play from Music CD: Sets  
the tracks in CD-DAs.  
Slideshow  
Rotate Left  
Plays a slideshow.  
Rotates the photo  
counterclockwise by  
90 degrees.  
Rotate Right  
Rotates the photo clockwise  
by 90 degrees.  
18  
Network Update  
Settings and Adjustments  
Connect the AC adaptor for the network  
update.  
Select “OK” to update the player’s software  
via the network.  
Using the Settings  
Displays  
Select  
(Setup) on the home menu when  
z
you need to change the settings of the player.  
The default settings are underlined.  
• We recommend the network update every 2  
months or so.  
• For information about update functions, visit the  
following website:  
1 Select  
(Setup) on the home menu  
using </,.  
b
2 Select the setup category icon using  
• Do not disconnect the AC adaptor until the  
network update completes.  
M/m, and press ENTER.  
• Make sure that the rechargeable battery is  
sufficiently charged before starting the update.  
Icon  
Explanation  
Network Update (page 19)  
Updates the software of the  
player.  
Screen Settings (page 19)  
Makes the video settings.  
Screen Settings  
TV Type  
Audio Settings (page 21)  
Makes the audio settings.  
16:9  
Select this when connecting  
to a wide-screen TV or a TV  
with a wide mode function.  
BD/DVD Viewing Settings  
Makes detailed settings for BD/  
DVD playback.  
4:3  
Select this when connecting  
to a 4:3 screen TV without a  
wide mode function.  
Parental Control Settings  
Makes detailed settings for the  
Parental Control function.  
Screen Format  
Original  
Select this when connecting  
to a TV with a wide mode  
function. Displays a 4:3  
screen picture in 16:9 aspect  
ratio even on a wide-screen  
TV.  
System Settings (page 23)  
Makes the player-related  
settings.  
Network Settings (page 23)  
Makes detailed settings for the  
Internet and network.  
Fixed Aspect Changes the picture size to  
Ratio  
fit the screen size with the  
original picture aspect ratio.  
Resetting (page 23)  
Resets the player to the factory  
settings.  
,continued  
19  
               
DVD Aspect Ratio  
BD/DVD-ROM 1080/24p Output  
Letter Box  
Displays a wide picture with  
black bands on the top and  
bottom.  
Auto  
Outputs 1920 × 1080p/  
24 Hz video signals only  
when connecting a 1080/  
24p-compatible TV using  
the HDMI OUT jack.  
Off  
Normally select this when  
your TV is not compatible  
with 1080/24p video signals.  
Pan & Scan  
Displays a full-height  
picture on the entire screen,  
with trimmed sides.  
b
No picture appears on the LCD screen when 24p  
video signals are output from the HDMI OUT jack.  
YCbCr/RGB (HDMI)  
Auto  
Automatically detects the  
connected TV type, and  
switches to the matching  
color setting.  
Cinema Conversion Mode  
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video  
signals.  
Auto  
Normally select this. The  
player automatically detects  
whether the material is  
video-based or film-based,  
and switches to the  
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video  
signals.  
RGB  
Outputs RGB video signals.  
appropriate conversion  
method.  
Pause Mode  
Video  
The conversion method  
suited for video-based  
material will always be  
selected regardless of the  
material.  
Auto  
Normally select this.  
Dynamic moving pictures  
appear without blurring.  
Frame  
Displays static pictures at  
high resolution.  
HDMI/LCD Video Format  
Normally select “Auto.”  
Select “Original Resolution” to output the  
resolution recorded on the disc. When the  
resolution is lower than the SD resolution, it  
is scaled up to the SD resolution.  
z
If no picture appears on the connected TV after  
setting the resolution, try another resolution setting.  
20  
   
Downmix  
Surround  
Outputs audio signals with  
surround effects. Select this  
when connecting an audio  
device that supports Dolby  
Audio Settings  
Audio (HDMI)  
*1  
Surround (Pro Logic) or  
Auto  
Normally select this.  
Outputs audio signals  
*2  
DTS Neo:6  
.
according to the status of the  
connected HDMI device.  
Stereo  
Outputs audio signals  
without surround effects.  
Select this when connecting  
an audio device that does not  
support Dolby Surround  
(Pro Logic) or DTS Neo:6.  
PCM  
Outputs PCM signals from  
the HDMI OUT jack.  
BD Audio MIX Setting  
*1  
*2  
On  
Outputs the audio obtained  
by mixing the interactive  
and secondary audio to the  
primary audio.  
Off  
Outputs the primary audio  
only. Select this to output  
HD audio signals to an AV  
amplifier (receiver).  
DTS Neo:6  
Cinema  
Performs “DTS Neo:6  
Cinema” mode decoding. A  
sourcerecorded in 2-channel  
format is decoded into 7  
channels.  
Music  
Performs “DTS Neo:6  
Music” mode decoding. A  
sourcerecorded in 2-channel  
format is decoded into 7  
channels. This setting is  
ideal for normal stereo  
sources such as CDs.  
Off  
Turns off “DTS Neo:6”  
decoding.  
Audio DRC  
Auto  
Performs playback at the  
dynamic range specified by  
the disc (BD-ROM only).  
Other discs are played back  
at the “On” level.  
On  
Off  
Performs playback at a  
standard compression level.  
No compression works. A  
more dynamic sound is  
produced.  
21  
           
BD/DVD Viewing  
Settings  
Parental Control  
Settings  
BD/DVD Menu  
Selects the default menu language for BD-  
ROMs or DVD VIDEOs.  
When you select “Select Language Code,”  
the display for entering the language code  
appears. Enter the code for your language by  
Password  
Sets or changes the password for the Parental  
Control function. A password allows you to  
set a restriction on BD-ROMs or DVD  
VIDEOs playback. If necessary, you can  
differentiate the restriction levels for BD-  
ROMs and DVD VIDEOs.  
Audio  
Parental Control Area Code  
Selects the default track language for BD-  
ROMs or DVD VIDEOs.  
Playback of some BD-ROMs or DVD  
VIDEOs can be limited according to the  
geographic area. Scenes may be blocked or  
replaced with different scenes. Follow the on-  
screen instructions and enter your four-digit  
password.  
When you select “Original,” the language  
given priority in the disc is selected.  
When you select “Select Language Code,”  
the display for entering the language code  
appears. Enter the code for your language by  
BD Parental Control  
Playback of some BD-ROMs can be limited  
according to the age of the users. Scenes may  
be blocked or replaced with different scenes.  
Follow the on-screen instructions and enter  
your four-digit password.  
Subtitle  
Selects the default subtitle language for BD-  
ROMs or DVD VIDEOs.  
When you select “Select Language Code,”  
the display for entering the language code  
appears. Enter the code for your language by  
DVD Parental Control  
Playback of some DVD VIDEOs can be  
limited according to the age of the users.  
Scenes may be blocked or replaced with  
different scenes. Follow the on-screen  
instructions and enter your four-digit  
password.  
BD Hybrid Disc Playback Layer  
BD  
Plays BD layer.  
DVD/CD  
Plays DVD or CD layer.  
BD Internet Connection  
Allow  
Normally select this.  
Do not allow  
Prohibits Internet  
connection from BD  
content.  
22  
               
Screen Saver  
On  
Turns on the screen saver  
function. The screen saver  
image appears when the  
player is not used for more  
than 10 minutes while  
displaying an on-screen  
display.  
System Settings  
OSD  
Selects your language for the player on-  
screen displays.  
Control for HDMI  
Off  
Turns off the function.  
On  
The following BRAVIA  
sync features are available:  
– One-Touch Play  
Software Update Notification  
On  
Sets the player to inform you  
of newer software version  
information (page 19).  
– System Power-Off  
– Language Follow  
Off  
Turns off the function.  
Off  
Turns off the function.  
z
System Information  
Displays the player’s software version  
information and the MAC address, etc.  
For details, refer to the instruction manual supplied  
with the TV or components.  
HDMI: Linked to TV-off  
On  
Automatically turns off the  
player and HDMI-  
compatible components  
when the connected TV  
enters standby mode  
(BRAVIA sync).  
Network Settings  
Internet Settings  
Connect the player to the network  
beforehand. For details, see “Connecting to  
Off  
Turns off the function.  
Auto Standby  
View Network  
Status  
On  
Turns on the “Auto  
Standby” function.  
Displays the current  
network status.  
Automatically returns to  
standby mode if no button  
on the player or remote is  
pressed for more than 30  
minutes.  
Wired Setup  
Connects the player to a  
broadband router directly.  
Network Connection Diagnostics  
You can run the network diagnostic to check  
if the network connection has been properly  
made.  
Off  
Turns off the function.  
Auto Display  
On  
Automatically displays  
information on the screen  
when changing the viewing  
titles, picture modes, audio  
signals, etc.  
Resetting  
Reset to Factory Default Settings  
You can reset the player settings to the  
factory default by selecting the group of  
settings. All the settings within the group will  
be reset.  
Off  
Displays information only  
when you press DISPLAY.  
23  
                     
, No picture appears on the LCD screen when  
24p video signals are output from the  
HDMI OUT jack. Set “BD/DVD-ROM  
1080/24p Output” to “Off” in the “Screen  
Settings” setup (page 20).  
Additional Information  
Troubleshooting  
The black points appear and the red, blue,  
green points remain on the LCD.  
, This is a structural property of the LCD and  
not a malfunction.  
If you experience any of the following  
difficulties while using the player, use this  
troubleshooting guide to help remedy the  
problem before requesting repairs. Should  
any problem persist, consult your nearest  
Sony dealer.  
Sound  
There is no sound.  
, The player is in pause mode or in slow play  
Power  
mode.  
The power is not turned on.  
, Check that the AC adaptor is securely  
connected (page 11).  
, The player is in fast forward or fast reverse  
mode.  
, Check that the rechargeable battery is  
sufficiently charged (page 11).  
The HD Audio (Dolby Digital Plus, Dolby  
TrueHD, DTS-HD High Resolution Audio,  
and DTS-HD Master Audio) is not output  
by bitstream.  
, Set “BD Audio MIX Setting” to “Off” in  
the “Audio Settings” setup (page 21).  
The rechargeable battery cannot be  
charged or charging time is long.  
, If the CHARGE indicator flashes with the  
AC adaptor connected, the ambient  
temperature is not appropriate. Charge the  
battery in an ambient temperature of  
between 5°C (41°F) and 35°C (95°F).  
, Charging takes longer if the player is turned  
on. Before charging, turn off the player.  
, If you have not used the player for more  
than a year, the battery may have  
The interactive audio is not output.  
, Set “BD Audio MIX Setting” to “On” in the  
“Audio Settings” setup (page 21).  
The sound mode is not switched.  
, Only “Standard” is available when the  
audio/video cable is connected. Disconnect  
the audio/video cable to enjoy other sound  
modes on the player.  
deteriorated. Consult your nearest Sony  
dealer.  
Picture  
Disc  
There is no picture or the picture is not  
output correctly.  
, The pictures on the LCD are displayed in  
standard quality when the audio/video cable  
is connected. Disconnect the audio/video  
cable to enjoy high quality digital pictures  
on the LCD.  
, Some digital content in commercially  
available BDs cannot be displayed on the  
LCD screen when the audio/video cable is  
connected. Disconnect the audio/video  
cable to enjoy such content on the LCD  
screen.  
The disc does not play.  
, The disc is dirty or skewed.  
, The disc is not set until it clicks (page 15).  
, The disc is upside down. Insert the disc with  
the playback side facing down.  
, The disc has a format that cannot be played  
back by this player (page 27).  
, The player cannot play a recorded disc that  
is not correctly finalized.  
, The region code on the BD or DVD does  
not match the player (page 28).  
24  
       
Operations  
Network connection  
Playback does not start from the  
beginning of content.  
, Press OPTIONS, and select “Play from  
beginning.”  
The player cannot connect to the network.  
, Check the network connection (page 13)  
and the network settings (page 23).  
The message “A new software version is  
available. Please go to the "Setup" section  
of the menu and select "Network update"  
to perform the update.” appears on the  
screen when turning the player on.  
Playback does not start from the resume  
point where you last stopped playing.  
, The resume point may be cleared from  
memory when  
– you open the disc lid.  
– you disconnect the USB device.  
– you play other content.  
the player to a newer software version.  
– you turn off the player.  
– you change some settings under the  
“Setup.”  
Hookup  
There is no picture or the picture is not  
output correctly.  
, Check that all the connecting cables are  
securely connected.  
The player does not respond to any button.  
, The ?/1/HOLD switch is set in the  
direction of HOLD.  
, Moisture has condensed inside the player  
, Switch the input selector on your TV to  
display the signal from the player.  
, For HDMI connections, try the following:  
1Turn the player off and on again. 2Turn  
the connected equipment off and on again.  
3Disconnect and then reconnectthe HDMI  
cable.  
, Disconnect the AC power cord from the  
wall outlet and slide the ?/1/HOLD switch  
in the direction of ?/1 and hold for 10  
seconds until the POWER indicator on the  
player turns off.  
, The HDMI OUT jack is connected to a DVI  
device that does not support copyright  
protection technology.  
, For HDMI connections, check the “HDMI/  
LCD Video Format” settings in the “Screen  
Settings” setup (page 20).  
, For BD-ROMs, check the “BD/DVD-ROM  
1080/24p Output” setting in the “Screen  
Settings” setup (page 20).  
, The pictures are displayed in standard  
quality on the HDMI-connected TV when  
the audio/video cable is connected at the  
same time. Disconnect the audio/video  
cable to enjoy high quality digital pictures  
on the HDMI-connected TV.  
USB device  
The player does not detect a USB device  
connected to the player.  
, Make sure that the USB device is securely  
connected to the USB jack.  
, Check if the USB device or a cable is  
damaged.  
, Check if the USB device is on.  
, If the USB device is connected via a USB  
hub, connect the USB device directly to the  
player.  
,continued  
25  
 
There is no sound or the sound is not  
output correctly.  
, Check that all the connecting cables are  
securely connected.  
, For HDMI connections, try the following:  
1Turn the player off and on again. 2Turn  
the connected equipment off and on again.  
3Disconnect and then reconnect the HDMI  
cable.  
, The HDMI OUT jack is connected to a DVI  
device (DVI jacks do not accept audio  
signals).  
“Control for HDMI” (BRAVIA  
Sync)  
The “Control for HDMI” function does not  
work (BRAVIA Sync).  
, Check that “Control for HDMI” is set to  
“On” (page 23).  
, If you change the HDMI connection, turn  
the player off and on again.  
, If power failure occurs, set “Control for  
HDMI” to “Off,” then set “Control for  
HDMI” to “On” (page 23).  
, The device connected to the HDMI OUT  
jack does not support the audio format of  
the player. Check the audio settings  
, Check the following and refer to the  
instruction manual supplied with the  
component.  
– the connected component is compatible  
with the “Control for HDMI” function.  
– the connected component’s setting for  
the “Control for HDMI” function is  
correct.  
, For HDMI connections, Set “Audio  
(HDMI)” to “Auto” in the “Audio Settings”  
, When both the HDMI and the audio/video  
cables are connected at the same time, no  
signal is output from the AUDIO IN/OUT  
jack. Disconnect the HDMI cable to enjoy  
sound on the equipment connected with the  
audio/video cable.  
, The sound mode can be switched only for  
the sound output from the player’s speaker.  
Only “Standard” is available for the sound  
output from the HDMI or AUDIO IN/OUT  
jack.  
The System Power-Off function does not  
work (BRAVIA Sync).  
, Check that “Control for HDMI” and  
“HDMI: Linked to TV-off” are set to “On”  
The display language on the screen  
switches automatically when connected to  
the HDMI OUT jack.  
, When “Control for HDMI” is set to “On”  
(page 23), the display language on the  
screen automatically switches according to  
the language setting of the connected TV (if  
you change the setting on your TV, etc.).  
26  
 
Playable discs  
Specifications  
Blu-ray  
Disc  
BD-ROM  
BD-R /BD-RE  
System  
*2  
*2  
*1  
Laser: Semiconductor laser  
*3  
Signal format system: NTSC  
DVD  
DVD-ROM  
DVD-R/DVD-RW  
DVD+R/DVD+RW  
Inputs/Outputs  
VIDEO IN/OUT (video input/output):  
Minijack  
AUDIO IN/OUT (audio input/output):  
*3  
CD  
CD-DA (Music CD)  
CD-ROM  
CD-R/CD-RW  
Stereo minijack  
PHONES (headphones) A/B:  
Stereo minijack  
USB:  
USB jack Type A (For connecting a USB  
memory, memory card reader, digital still  
camera, and digital video camera)  
HDMI OUT:  
HDMI 19-pin standard connector  
LAN (100):  
*1  
Since the Blu-ray Disc specifications are new  
and evolving, some discs may not be playable  
depending on the disc type and the version.  
The audio output differs depending on the  
source, connected output jack, and selected  
audio settings.  
BD-RE: Ver.2.1  
BD-R: Ver.1.1, 1.2, 1.3 including organic  
pigment type BD-R (LTH type)  
The BD-Rs recorded on a PC cannot be played if  
postscripts are recordable.  
A CD or DVD disc will not play if it has not been  
correctly finalized. For more information, refer  
to the instruction manual supplied with the  
recording device.  
*2  
*3  
100BASE-TX Terminal  
Liquid Crystal Display  
Panel size (approx.):  
10.1 inches wide (diagonal)  
Driving system:  
TFT active matrix  
Resolution:  
Discs that cannot be played  
• BDs with cartridge  
1024 × 600  
• BDXLs  
• DVD-RAMs  
• HD DVDs  
• DVD Audio discs  
General  
Power requirements:  
DC 14.3 V 1.6 A (AC adaptor/Car battery  
adaptor)  
Power consumption:  
15 W (when playing a BD-ROM using  
headphones)  
• PHOTO CDs  
• Data part of CD-Extras  
• VCDs/Super VCDs  
• HD layer on Super Audio CDs  
• Audio material side on DualDiscs  
• A disc recorded in a color system other than  
NTSC, such as PAL (this player conforms  
to the NTSC color system).  
Dimensions (approx.):  
259 mm × 204 mm × 40.2 mm  
1
1
5
(10 / in. × 8 / in. × 1 / in.)  
4
8
8
(width/depth/height) incl. projecting parts  
Mass (approx.):  
1.53 kg (3.37 lbs)  
Operating temperature:  
5 ºC to 35 ºC (41 °F to 95 °F)  
Operating humidity:  
25 % to 80 %  
AC adaptor:  
110-240 V AC, 50/60 Hz  
Car battery adaptor:  
12 V DC  
Supplied accessories  
Specifications and design are subject to  
change without notice.  
,continued  
27  
             
Note on Discs  
Playable types of files  
This product is designed to playback discs  
that conform to the Compact Disc (CD)  
standard. DualDiscs and some of the music  
discs encoded with copyright protection  
technologies do not conform to the Compact  
Disc (CD) standard, therefore, these discs  
may not be playable by this product.  
Video  
File format  
Extensions  
*1  
MPEG-1 Video/PS  
“.mpg,” “.mpeg,”  
MPEG-2 Video/PS, “.m2ts,” “.mts”  
*1  
TS  
*1  
Note on playback operations of BDs/DVDs  
Some playback operations of BDs/DVDs  
may be intentionally set by software  
producers. Since this player plays BDs/  
DVDs according to the disc contents the  
software producers designed, some playback  
features may not be available.  
MPEG-4 AVC  
“.mkv,” “.mp4,”  
“.m4v,” “.m2ts,”  
“.mts”  
*1  
WMV9  
“.wmv,” “.asf”  
*2  
AVCHD  
Music  
Note about double-layer BDs/DVDs  
The playback pictures and sound may be  
momentarily interrupted when the layers  
switch.  
File format  
Extensions  
MP3 (MPEG-1 Audio “.mp3”  
Layer III)  
*1*3  
AAC  
“.m4a”  
“.wma”  
“.wav”  
*1*3  
Region code (BD-ROM/DVD VIDEO only)  
The system that is used to protect copyrights.  
The region code is shown on the BD-ROM/  
DVD VIDEO packages according to the  
region of sale.  
WMA9 Standard  
LPCM  
Photo  
BD-ROMs labeled “A” will play on the  
player.  
File format  
Extensions  
JPEG  
“.jpg,” “.jpeg”  
*1  
The player does not play coded files such as  
DRM.  
The player plays AVCHD format files that are  
recorded on a digital video camera, etc. The  
AVCHD format disc will not play if it has not  
been correctly finalized.  
DVD VIDEOs labeled “ALL” or “1” will  
play on the player.  
*2  
ALL  
*3  
The player does not play coded files such as  
Lossless.  
28  
     
b
• Some files may not play depending on the format,  
the encoding, or recording condition.  
• Some files edited on a PC may not play.  
• The player can recognize the following files or  
folders in BDs, DVDs, CDs and USB devices:  
– up to folders in the 5th tree  
Copyrights and Trademarks  
• “AVCHD” and the “AVCHD” logo are  
trademarks of Panasonic Corporation and Sony  
Corporation.  
• Java, the coffee cup logo, and all Java based  
marks are trademarks or registered trademarks of  
Sun Microsystems, inc. in the U.S. or other  
countries.  
, “XMB,” and “xross media bar” are  
trademarks of Sony Corporation and Sony  
Computer Entertainment Inc.  
• This product incorporates High-Definition  
Multimedia Interface (HDMI™) technology.  
HDMI, the HDMI Logo, and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI Licensing LLC in the  
United States and other countries.  
– up to 500 files in a single tree  
The number of files or folders differs depending  
on the conditions.  
• Some USB devices may not work with this  
player.  
• The player can recognize Mass Storage Class  
(MSC) devices (such as flash memory or an  
HDD) that are FAT-compatible and non-  
partitioned and Still Image Capture Device  
(SICD) class devices.  
• To avoid data corruption or damage to the USB  
memory or devices, turn the player off when  
connecting or removing the USB memory or  
devices.  
• “Blu-ray Disc” is a trademark.  
• “Blu-ray Disc,” “DVD+RW,” “DVD-RW,”  
“DVD+R,” “DVD-R,” “DVD VIDEO,” and  
“CD” logos are trademarks.  
• “BD-LIVE,” “BD-LIVE” logo, and  
“BONUSVIEW” are trademarks of Blu-ray Disc  
Association.  
• The player may not play high bit rate video files  
on DATA CDs smoothly. You are recommended  
to play such files using DATA DVDs.  
• “BRAVIA” is a trademark of Sony Corporation.  
• “PhotoTV HD” and the “PhotoTV HD” logo are  
trademarks of Sony Corporation.  
• MPEG Layer-3 audio coding technology and  
patents licensed from Fraunhofer IIS and  
Thomson.  
• Other system and product names are generally  
trademarks or registered trademarks of the  
manufacturers. ™ and ® marks are not indicated  
in this document.  
,continued  
29  
Language code list  
The language spellings conform to the ISO 639: 1988 (E/F) standard.  
Code Language  
not specified  
Parental control area code  
Code Area  
2044 Argentina  
2047 Australia  
2046 Austria  
2057 Belgium  
2070 Brazil  
2219 Hong Kong  
2248 India  
2427 Pakistan  
2424 Philippines  
2428 Poland  
2238 Indonesia  
2239 Ireland  
2436 Portugal  
2489 Russia  
2501 Singapore  
2149 Spain  
2254 Italy  
2090 Chile  
2276 Japan  
2092 China  
2304 Korea  
2093 Colombia  
2115 Denmark  
2165 Finland  
2174 France  
2109 Germany  
2200 Greece  
2333 Luxembourg  
2363 Malaysia  
2362 Mexico  
2376 Netherlands  
2390 New Zealand  
2379 Norway  
2499 Sweden  
2086 Switzerland  
2543 Taiwan  
2528 Thailand  
2184 United Kingdom  
30  
 
M
Index  
MAC address 23  
Words in quotations appear  
in the on-screen displays.  
N
“Network Settings” 23  
“Network Update” 19  
A
AUDIO 9  
O
“Audio Settings” 21  
“Auto Standby” 23  
OPTIONS 8  
“OSD” 23  
B
P
Batteries 11  
“BD/DVD Viewing  
Settings” 22  
BD-LIVE 15  
BD-R 27  
Parental Control 22  
“ParentalControlSettings”  
Playable discs 27  
Playback information 16  
POP UP/MENU 8  
BD-RE 27  
Bitstream 24  
Blu-ray Disc 27  
BONUSVIEW 15  
BRAVIA Sync 26  
R
Region code 28  
Remote 9, 11  
“Resetting” 23  
Resetting the player 23  
Resume 8, 25  
C
Charging time and playing  
time 11  
Color buttons 9  
Connecting  
Network 13  
Other equipment 13  
“Control for HDMI” 23,  
S
“Screen Settings” 19  
“Setup” 19  
Software update 19, 23  
SOUND 9  
SUBTITLE 9  
“System Settings” 23  
D
T
DISPLAY 8  
Dolby Digital 21  
DTS 21  
TOP MENU 8  
Troubleshooting 24  
“TV Type” 19  
DVD 27  
U
H
Update 19  
USB 16  
HDMI 20, 21  
HOME 8, 19  
Home menu 19  
L
“LCD Mode” 17  
31  
 
The software of this player may be updated in the future. To find out details on any available  
© 2011 Sony Corporation Printed in China  
4-264-055-11(1)  

Westcott PokerLite 7054 User Manual
Waring MEGAMIX HPB300 User Manual
Toshiba TEC MA 1300 100 User Manual
Toshiba MA 136 User Manual
Sony Xplod CDX M7815X User Manual
Sony TC TX313 User Manual
Sony Camcorder CCD TR74 User Manual
Sharp Cash Register XE A207 User Manual
Samsung Car Video System B1630N User Manual
Samsung 51CH User Manual