BD-HP22U
BLU-RAY DISC PLAYER
OPERATION MANUAL
MANUAL DE MANEJO
REPRODUCTOR DE DISCO BLU-RAY
ENGLISH
OPERATION MANUAL
BD-HP22U
• This Player is classified as a CLASS 1 LASER product.
• The CLASS 1 LASER PRODUCT label is located on
the rear cover.
• This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
1
Introduction
Contents
Enjoying BONUSVIEW or BD-LIVE.............................. 25
Use of Picture in Picture function (secondary audio/
video playback) ................................................... 25
Virtual Package...................................................... 25
BD-LIVE................................................................. 25
DVD-R/-RW/BD-RE/-R Playback.......................... 26–27
Playback by selecting a title ................................... 26
Playback by selecting a chapter............................. 27
Sorting the titles..................................................... 27
Playback by selecting a Playlist.............................. 27
Playing back the title you stopped while being played. ... 27
Audio CD Playback..................................................... 28
Playback from the beginning.................................. 28
Playback by selecting a track................................. 28
Operation procedure for the “Functions” menu ...... 28
Playback Functions................................................... 29–31
Fast Forward/Reverse (Search) ................................... 29
Skipping to the Next or the Start of the Current
Introduction
Contents............................................................................. 2
What would you like to do with this Player?................... 3
DEAR SHARP CUSTOMER ............................................... 4
IMPORTANT SAFETY INSTRUCTIONS........................ 4–5
About Discs.................................................................... 6–7
Blu-ray Disc .................................................................. 6
Types of Discs that Can Be Used with This Player......... 6
Discs that Cannot Be Used with This Player.............. 6–7
About Disc Contents......................................................... 8
BD Video ...................................................................... 8
Title, Chapter and Track................................................ 8
Icons Used on DVD Video Disc Cases .......................... 8
The Icons Used in This Operation Manual ..................... 8
Important Information....................................................... 9
Disc Precautions........................................................... 9
Copyright...................................................................... 9
Getting Started ................................................................ 10
Major Components.................................................... 11–12
Main Unit (Front).......................................................... 11
Main Unit (Rear) .......................................................... 11
HDMI cable holder on the rear of the main unit ...... 11
Remote Control Unit ................................................... 12
Chapter (Track)......................................................... 29
Pause/Frame Advance Playback................................. 29
Slow Playback ............................................................ 29
Repeat Playback of a Title or Chapter
(Repeat Playback) .................................................... 29
Partial Repeat Playback (Repeat Playback of
a Specified Part)....................................................... 30
Displaying the Audio Information................................. 30
Switching Subtitles...................................................... 30
Switching the Angle .................................................... 31
Displaying the Angle Mark........................................... 31
JPEG File Playback ......................................................... 32
Playing back still images in sequence.......................... 32
Playing back still images in a selected folder ............... 32
Playing back Slide Show............................................. 32
Setting slide show speed/repeat playback .................. 32
Settings During Playback ......................................... 33–34
Function Control ......................................................... 33
Function control operation procedure .................... 33
Functions which can be set ................................... 34
Connection
Introduction to Connections .......................................... 13
Video Connections .................................................... 14–16
Connecting to the HDMI Terminal................................ 14
Selecting the priority video output when connecting
HDMI and Component video.................................... 14
Connecting to the Component Jacks.......................... 15
Connecting to the Video Jack..................................... 16
Audio Connections.......................................................... 17
Connecting to the Digital Audio Terminal or Audio Jacks... 17
Broadband Internet Connection .................................... 18
Connecting to the ETHERNET terminal....................... 18
Settings
Disc Playback
SETTINGS................................................................... 35–44
Common operations................................................... 35
Basic Operation for Playback Setting.......................... 35
Audio Video Settings............................................. 36–37
Quick Start.................................................................. 37
Auto Power Off ........................................................... 37
AQUOS LINK.............................................................. 37
Playback Setting......................................................... 38
Front Display/LED....................................................... 38
Version........................................................................ 38
System Reset ............................................................. 38
Communication Setup .......................................... 39–41
The operation procedure for inputting characters
Before Starting Playback.......................................... 19–22
Loading the Batteries in the Remote Control............... 19
Approximate operating range of remote control ..... 19
Connecting the Power Cord........................................ 19
Turning the Power On ................................................. 20
Turning the power on............................................. 20
Entering standby.................................................... 20
Indicators on the Player ......................................... 20
Language Setting........................................................ 21
Changing the on-screen display language.............. 21
Operating a SHARP TV Using the Remote Control...... 21
TV function control................................................. 21
Turning Off the LCD Backlight and Indications............. 22
Using AQUOS LINK .................................................... 22
Controlling the Blu-ray disc player using AQUOS
manually.............................................................. 41
USB Memory Management......................................... 42
Software Update......................................................... 43
LINK.................................................................... 22
BD/DVD/CD Playback............................................... 23–28
Loading a Disc............................................................ 23
BD/DVD Video Playback............................................. 23
Displaying the disc information............................... 23
BD/DVD Menus .......................................................... 24
Start playback by selecting a title from the top menu... 24
Using the disc menu.............................................. 24
Using the pop-up menu......................................... 24
Appendix
Troubleshooting......................................................... 45–47
To Reset this Player..................................................... 47
On-screen Error Messages ............................................ 47
Glossary ..................................................................... 48–49
Specifications .................................................................. 50
CONSUMER LIMITED WARRANTY.......................... 51–52
*
The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary slightly
from the actual operations.
2
What would you like to do with this Player?
Watching high quality movies on Blu-
ray discs
This Player offers full high-definition Blu-ray disc
playback.
What to do first:
Refer to “Getting Started” (p. 10) to prepare
for watching your discs.
BD/DVD/CD Playback (p. 23)
Introduction (pp. 1–12)
Enjoying different kinds of discs and
Explains the important operation information.
contents
Use this Player to enjoy various types of optical
discs such as DVDs and CDs that contain various
multimedia content.
About Discs (pp. 6–7)
BD/DVD/CD Playback (p. 23)
Connection (pp. 13–18)
Shows the connecting options provided by
this Player.
Simple connection and operation
through HDMI
This Player is equipped with an HDMI terminal. You
can connect it to the TV using HDMI and no other
cable will be needed to enjoy movies. If your TV
is compatible with AQUOS LINK, you can control
both the TV and this Player with simple operations.
Disc Playback (pp. 19–34)
Shows simple playback and useful functions.
Introduction to Connections (p. 13)
Video Connections (p. 14)
Settings (pp. 35–44)
Gives you more options to suit your
circumstances.
Enjoying BD-LIVE functions through
the internet
This Player is compatible with BD-LIVE. You can
enjoy bonus content such as movie trailers through
the internet when playing back BD-Video discs
compatible with BD-LIVE.
Appendix (pp. 45–52)
Provides troubleshooting tips and more
information.
Enjoying BONUSVIEW or BD-LIVE
(p. 25)
3
DEAR SHARP CUSTOMER
Thank you for your purchase of the SHARP Blu-ray Disc Player. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Instructions carefully before
using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your
Blu-ray Disc Player, please read the following precautions carefully before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
For products intended to operate from battery power, or other sources, refer to the operating instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in
a risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to
the method recommended by the manufacturer.
22) The main AC plug is used as disconnect device and shall always remain readily operable.
4
IMPORTANT SAFETY INSTRUCTIONS
• Water and Moisture—Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base
can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
• Selecting the location—Select a place with no direct sunlight and good ventilation.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer's instructions are followed.
• Heat—The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
• Lightning—For added protection for this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-
line surges.
• To prevent fire, never place any type of candle or flames on the top or near the product.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• To prevent fire or shock hazard, do not place the AC cord under the product or other heavy items.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• To clean the outer cabinet, periodically wipe it with a soft cloth.
• Do not use chemicals for cleaning. It may damage the cabinet finish.
5
About Discs
• BD/DVD video players and discs have region codes, which
dictate the regions in which a disc can be played. This
Player's region code is A for BD and 1 for DVD. (Discs
marked ALL will play in any player.)
• BD/DVD video operations and functions may be different
from the explanations in this manual and some operations
may be prohibited due to disc manufacturer's settings.
• If a menu screen or operating instructions are displayed
during playback of a disc, follow the operating procedure
displayed.
Blu-ray Disc
Blu-ray Disc is the ultimate next generation optical
media format, offering the following key features:
• Largest capacity (25 GB single layer – 50 GB dual layer)
– with over 5 times the amount of content possible with
current DVDs, particularly well suited for high definition
feature films with extended levels of interactive features
• Pristine picture quality with the capability for full high
definition 1920 x 1080p resolution
• Best audio possible with uncompressed surround sound
(higher quality than even theater audio)
• Broadest industry support – ensuring more choice for
consumers in the marketplace
• Hardware products will be backward compatible with
DVDs, allowing continued enjoyment of existing DVD
libraries.
• Disc Durability – new breakthroughs in hard coating
technologies gives Blu-ray Discs the strongest resistance
to scratches and finger prints.
• The audio component of a DVD video recorded at 96
kHz (Linear PCM) will be output as 48 kHz audio during
playback.
NOTE
• Playback for some of the discs in the left side column
tables may not be possible depending on the disc.
• “Finalize” refers to a recorder processing a recorded disc
so that it will play in other DVD players/recorders as well
as this player. Only finalized DVD discs will play back in
this player. (This player does not have a function to finalize
discs.)
Types of Discs that Can Be Used
with This Player
• The following discs can be played back in this Player. Do
not use an 8 cm (3”) to 12 cm (5”) adapter.
Discs that Cannot Be Used with
This Player
The following discs cannot be played back or will
not play back properly on this Player. If such a
disc is mistakenly played back, speaker damage
may occur. Never attempt to play back these
discs.
• Use discs that conform to compatible standards as
indicated by the presence of official logos on the disc label.
Playback of discs not complying with these standards is
not guaranteed. In addition, the image quality or sound
quality is not guaranteed even if the discs can be played
back.
CDG, Video CD, Photo CD, CD-ROM, CD-TEXT, SVCD,
SACD, PD, CDV, CVD, DVD-RAM, DVD-Audio, BD-RE
with the cartridge, CD-MP3, CD-WMA
Recording
Format
Disc Type
BD Video Region
Contents
Disc Size
—
Audio
12 cm (5”)
code
A/ALL
+ Video
(Movie)
Discs with unusual shapes cannot be played.
• Discs with unusual shapes (heart-shaped or hexagonal
discs, etc.) cannot be used. The use of such discs will
cause malfunction.
The following BD video discs cannot be played.
• Discs not displaying “A” or “ALL” for the region code (discs
sold outside the authorized marketing area).*
• Discs produced illegally.
BD-RE DL
BD-R DL
BDMV/
BDAV
format
• Discs recorded for commercial use.
DVD Video Region
Video
format
Audio
+ Video
(Movie)
12 cm (5”)
8 cm (3”)
*
The region code for this product is A.
code
1/ALL
The following DVD video discs cannot be played.
• Discs not displaying “1” or “ALL” for the region code (discs
sold outside the authorized marketing area).*
• Discs produced illegally.
ALL
1
DVD+RW/DVD+R
DVD-R DL
DVD-RW/DVD-R
Video/VR
format
(finalized
disc only)
Audio
+ Video
(Movie)
12 cm (5”)
8 cm (3”)
• Discs recorded for commercial use.
*
The region code for this product is 1.
The following BD-RE/R, DVD-RW/R and
DVD+RW/R discs cannot be played.
• Discs on which data has not been recorded cannot be
played back.
Audio CD*1
Audio CD
(CD-DA)
Audio
Audio
CD-RW/CD-R
Audio CD
(CD-DA)
12 cm (5”)
8 cm (3”)
The following Audio CD discs cannot be played.
• Discs containing a signal for the purpose of protecting
copyrights (copy control signal) may not be played back
with this Player.
JPEG*2
Still image
(JPEG file)
• This Player has been designed on the premise of playing
back Audio CDs that comply with CD (Compact Disc)
standards.
1 This Player has been designed on the premise of playing
back Audio CDs that comply with CD (Compact Disc)
standards. CDs containing a signal for the purpose of
protecting copyrights (copy control signal) may not be able
to be played back with this Player.
*
6
About Discs
The following CD-RW/R discs cannot be played.
• Discs on which data has not been recorded cannot be
played back.
Structure of still images (JPEG) folders
You can play still images (JPEG) with this unit by making
folder on disc as shown below.
• Discs recorded in a format other than an Audio CD and
JPEG file format*2 cannot be played back.
• Discs may not be played back depending on their
recording status or the status of the disc itself.
• Discs may not be played back depending on their
compatibility with this Player.
Root
01 Folder
001.jpg
*2 About the JPEG file format
JPEG is a type of file format for storing still-image files
(photos, illustrations, etc.). The Player lets you play JPEG
format still-image files.
256.jpg
02 Folder
File formats that are not compatible.
• Still images in formats other than JPEG (such as TIFF)
cannot be played.
• There may be some files that cannot be played even if they
are in JPEG format.
001.jpg
256.jpg
• Progressive JPEG files cannot be played.
• Moving image files and audio files as well as Motion JPEG
format files cannot be played, even though they are JPEG
files.
256 Folder
001.jpg
Other files that cannot be played back.
• You may not be able to play some still images which you
have created, touched up, copied or otherwise edited on
your computer.
You may experience one or more of the following
symptoms when playing files.
• It may take some time to play files depending on the
number of folders, number of files and volume of data
involved.
256.jpg
• EXIF information will not be displayed. EXIF stands for
Exchangeable Image File Format, and is a standard for
storing interchange information in image files, especially
more information.)
When using the unit to play a CD-RW/R disc with
still images stored (recorded).
• With CD-RW/R discs on which still images are mixed in
with music or movies, you will be able to play only the still
images. You may not be able to play some of these discs
at all.
• Multi-session discs cannot be played.
• You may not be able to play some still images you have
processed (rotated or saved by overwriting other images)
using image processing software or some still images you
have imported from the Internet or e-mail.
• The discs which this Player can play back (recognize) are
limited to the following properties:
Contains EXIF format files
Picture resolution: Between 32g32 and 7680g4320
pixels
Maximum number of folders: 256
Maximum number of files in each folder: 256
File size: 20MB or less
7
About Disc Contents
DTS
DTS is a digital sound system developed by DTS, Inc. for
use in cinemas.
BD Video
Enjoy BD-specific functions including BONUSVIEW (BD-ROM
Profile 1 Version 1.1), such as picture-in-picture, and BD-LIVE
(page 25).
For the BD video discs compatible with BONUSVIEW/BD-
LIVE, you can enjoy additional contents by copying the data
from the discs or downloading it via the internet. For instance,
this function is capable of playing the original movie as the
primary video while playing video commentary from the film
director on a small screen as a secondary video.
Linear PCM
Linear PCM is a signal recording format used for Audio
CDs and on some DVD and Blu-ray discs. The sound
on Audio CDs is recorded at 44.1 kHz with 16 bits.
(Sound is recorded between 48 kHz with 16 bits and 96
kHz with 24 bits on DVD video discs and between 48
kHz with 16 bits and 192 kHz with 24 bits on BD video
discs.)
2
3
4
Subtitle languages
NOTE
This indicates the kind of subtitles.
• The available functions differ depending on the disc.
Screen aspect ratio
Movies are shot in a variety of screen modes.
Title, Chapter and Track
Camera angle
Recorded onto some BD/DVD discs are scenes which
have been simultaneously shot from a number of
different angles (the same scene is shot from the front,
from the left side, from the right side, etc.).
• Blu-ray discs and DVDs are divided into “Titles” and
“Chapters”. If the disc has more than one movie on it, each
movie would be a separate “Title”. “Chapters”, on the other
hand, are subdivisions of titles. (See Example 1.)
• Audio CDs are divided into “Tracks”. You can think of a
“Track” as one tune on an Audio CD. (See Example 2.)
5
Region code
This indicates the region code (playable region code).
Example 1: Blu-ray disc or DVD
The Icons Used in This Operation
Manual
BD VIDEO ...........Indicates the functions that can be
Title 1
Title 2
performed for BD Video discs.
BD-RE
BD-R
...........Indicates the functions that can be
performed for BD-RE discs.
...........Indicates the functions that can be
performed for BD-R discs.
.......Indicates the functions that can be
performed for DVD Video discs.
Chapter 1 Chapter 2 Chapter 3 Chapter 1
Example 2: Audio CD
DVD VIDEO
DVD-RW ...........Indicates the functions that can be
performed for DVD-RW discs.
............Indicates the functions that can be
Track 1
Track 2
Track 3
Track 4
DVD-R
performed for DVD-R discs.
...........Indicates the functions that can be
performed for Audio CDs.
..........Indicates the functions that can be
performed for CD-R discs in JPEG format.
...........Indicates the functions that can be
performed for CD-RW discs in JPEG format.
AUDIO CD
Icons Used on DVD Video Disc Cases
CD-R
JPEG
The back of the case of a DVD that is commercially
available usually contains various information about the
contents of the disc.
CD-RW
JPEG
1
2
1. English
2. Chinese
1. English
2. Chinese
2
2
3
4
5
1 23
4 56
16:9 LB
2
1
Audio tracks and audio formats
DVD discs can contain up to 8 separate tracks with
a different language on each. The first in the list is the
original track.
This section also details the audio format of each
soundtrack — Dolby Digital, DTS, MPEG etc.
Dolby Digital
A sound system developed by Dolby Laboratories Inc.
that gives movie theater ambience to audio output when
the Player is connected to a Dolby Digital processor or
amplifier.
8
Important Information
Disc Precautions
Copyright
• Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright. Refer to relevant laws in your
country.
• This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
Be Careful of Scratches and Dust
• BD, DVD and CD discs are sensitive to dust, fingerprints
and especially scratches. A scratched disc may not be able
to be played back. Handle discs with care and store them
in a safe place.
Proper Disc Storage
Place the disc in the center of the
disc case and store the case and
disc upright.
U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698;
6,516,132; and 5,583,936
Avoid storing discs in locations
subject to direct sunlight, close to
heating appliances or in locations
of high humidity.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
• Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &
other U.S. and worldwide patents issued & pending. DTS is
a registered trademark and the DTS logos, Symbol, DTS-
HD and DTS-HD Master Audio | Essential are trademarks
of DTS, Inc. ©1996-2008 DTS, Inc. All Rights Reserved.
Do not drop discs or subject them
to strong vibrations or impacts.
Avoid storing discs in locations
where there are large amounts of
dust or moisture.
•
is a trademark.
• “BD-LIVE” logo is a trademark of Blu-ray Disc Association.
is a trademark of DVD Format/Logo Licensing
Corporation.
Handling Precautions
•
• If the surface is soiled, wipe gently with a soft, damp (water
only) cloth. When wiping discs, always move the cloth from
the center hole toward the outer edge.
• HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
• “x.v.Color” and “x.v.Color” logo are trademarks.
• Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and/or other countries.
• Do not use record cleaning sprays, benzene, thinner, static
electricity prevention liquids or any other solvent.
• Do not touch the surface.
• Do not stick paper or adhesive labels to the disc.
• If the playing surface of a disc is soiled or scratched, the
Player may decide that the disc is incompatible and eject
the disc tray, or it may fail to play the disc correctly. Wipe
any dirt off the playing surface with a soft cloth.
Cleaning the Pick Up Lens
• Never use commercially available cleaning discs. The use
of these discs can damage the lens.
• Request the nearest service center approved by SHARP to
clean the lens.
ENERGY STAR® Program Information
Warnings about dew formation
• Condensation may form on pick up lens or disc in the
following conditions:
Products that have earned
the ENERGY STAR® are
designed to protect the
environment through
− Immediately after a heater has been turned on.
− In a steamy or very humid room.
− When the Player is suddenly moved from a cold
environment to a warm one.
When condensation forms:
superior energy efficiency.
• It becomes difficult for the Player to read the signals
on the disc and prevents the Player from operating
properly.
To remove condensation:
To comply with the ENERGY STAR® standards mentioned
above, please set the Quick Start function to “No” as
described on page 37.
• Take out the disc and leave the Player with the power
off until the condensation disappears. Using the Player
when there is condensation may cause malfunction.
ENERGY STAR® is a U.S. registered mark.
9
Getting Started
Step 1: Unpacking
Make sure the following accessories are provided with the product.
Remote control unit
AC cord
“AA” size battery (g2)
AV cable
USB memory device
Step 2: Selecting equipment to connect
Connection varies with the equipment used. Refer to Connection. (Pages 13–18)
Turn off the devices before connecting.
Step 3: Playing back discs
Play back a Blu-ray disc after connecting the Player to your favorite equipment.
Refer to Disc Playback. (Pages 19–34)
Step 4: Adjust settings
Adjust settings to enjoy various features and other functions for playing discs.
Refer to Settings. (Pages 35–44)
10
Major Components
Main Unit (Front)
1
2
3
4
5
6
7
8
9 10
11
12
9
AQUOS PURE MODE indicator
(pp. 20, 22)
1
2
3
4
OPEN/CLOSE (p. 23)
Flap door
5
POWER (p. 20)
d PLAY (p. 23)
H STOP (p. 23)
F PAUSE (p. 29)
6
7
8
10 Remote control sensor (p. 19)
11 Front panel display (p. 20)
Disc tray (p. 23)
ON/STANDBY indicator (p. 20)
12 BD/DVD/CD mode indicator (p. 20)
Main Unit (Rear)
1
COMPONENT VIDEO OUT jacks
(p. 15)
2
3
4
VIDEO output jack (p. 16)
2CH AUDIO output jacks (p. 17)
DIGITAL AUDIO OUT OPTICAL
terminal (p. 17)
8
9
10
5
6
ETHERNET terminal (p. 18)
BD STORAGE/SERVICE terminal
BD STORAGE (pp. 25, 42)
2
3
SERVICE for software (p. 43)
7
8
9
HDMI OUT terminal (p. 14)
1
HDMI cable holder (See below.)
Cooling fan
The cooling fan operates while the
power to the Player is on.
4
5
6
7
10 AC IN terminal (p. 19)
HDMI cable holder on the rear of the main
unit
Connect the HDMI cable to
the rear of the main unit while
providing some slack.
This Player comes with a dedicated cable holder so that the HDMI
cable does not place direct weight and stress on the terminal. When
connecting the HDMI cable, be sure to pass the cable through the
cable holder and secure it.
CAUTION
• Do not pull on the HDMI cable when it is connected to the terminal, as
this can damage the terminal or cause a poor connection.
1 Press down on the tab and pull it towards you.
2 Pass the HDMI cable (commercially available) through the
cable holder.
HDMI cable
3 Press in on the tab until it clicks into position.
11
Major Components
Remote Control Unit
1
2
3
4
5
6
7
8
9
POWER (p. 20)
m OPEN/CLOSE (p. 23)
AUDIO (p. 30), SUBTITLE (p. 30)
Number buttons (p. 34)
REPEAT (pp. 29, 30)
T SKIP/k (pp. 26, 29)
U SKIP/l (pp. 26, 29)
F PAUSE (p. 29)
1
2
3
16
17
d PLAY (p. 23)
4
10 TOP MENU/TITLE LIST (pp. 24, 26)
11 Cursor buttons (a/b/c/d), ENTER (pp. 21, 35)
12 EXIT (pp. 20, 35)
13 A (Red), B (Green), C (Blue), D (Yellow) (pp. 26-28, 32,
41)
5
6
18
19
20
21
14
(Lock) (See below.)
15 VIDEO OUTPUT RESET (p. 36)
16 DISPLAY (pp. 23, 30)
17 TV control buttons (p. 21)
18 FUNCTION (pp. 31, 33)
19 V FWD (p. 29)
7
8
9
10
22
20 S REV (p. 29)
21 H STOP (p. 23)
22 POP-UP MENU (p. 24)
23 n RETURN (p. 29)
24 PinP (p. 25)
11
25 SETUP (pp. 21, 35)
12
13
23
Keylock function
You can set the keylock to prevent accidental operations.
This function allows TVs compatible with AQUOS LINK to
also perform a Key Lock on the player.
Press and hold
• Each time you perform this operation, the function is
activated or deactivated.
• If you try to operate the Player while the keylock function
is set, “Hold” blinks on the front display panel to indicate
that the keylock function is set.
(Lock) for more than 5 seconds.
14
15
24
25
12
CInonnterctoionduction to Connections
This Player is equipped with the terminals/jacks listed below. Find the corresponding terminal/jack on your video
equipment. Using the supplied cable or commercially available cables, connect the video first. Then connect the
audio.
Video terminals/jacks on this Player
Higher Quality
1 HDMI OUT terminal
Page 14
Page 15
2 COMPONENT VIDEO OUT
jacks
3 VIDEO output jack
Page 16
Standard Quality
Audio terminals/jacks on this Player
Digital audio connection
Higher Quality
1 HDMI OUT terminal
Page 14
Page 17
2 DIGITAL AUDIO OUT
OPTICAL terminal
Standard Quality
Analog audio connection
Standard Quality
2CH AUDIO output jacks
Page 17
Page 18
Broadband Internet connection
ETHERNET terminal
13
Video Connections
Connecting to the HDMI Terminal
• You can enjoy high quality digital picture and sound through the HDMI terminal.
• See page 44 for information on the output of next generation audio formats.
• When you use AQUOS LINK, make sure to use a certified HDMI cable.
STEPS
1
2
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an HDMI cable (commercially available) to the HDMI terminals (1 and 2).
This Player
NOTE
• Audio transmitted in DTS-HD High
Resolution Audio and DTS-HD Master
Audio formats is output from the
HDMI terminal as Bitstream. Connect
an amplifier with a built-in decoder to
enjoy the fine sound quality.
• When using an HDMI output, 7.1 ch
Digital Output is available.
Selecting the priority video output when
connecting HDMI and Component video
When you connect both an HDMI cable and a
component cable to this player, you need to select
the priority video output in “Settings” – “Audio Video
Settings” – “Video Out Select”. (See page 36.)
To HDMI OUT terminal
1
NOTE
• When you connect the player to a SHARP TV with an
HDMI cable only and the TV is turned on, the video output
switches to HDMI automatically. (The above setting is
unnecessary.)
• When you connect the player to a TV with an HDMI cable,
“HDMI Video Out” is set to “Auto”. If you don’t get a stable
image, select the desired resolution*.
HDMI cable
(commercially available)
When you set “HDMI Video Out” to a setting other than
“Auto”, you can only select resolutions* that are compatible
with the connected TV.
Refer to “HDMI Video Out” on page 36 regarding the
resolutions of the HDMI video output.
*
To HDMI IN terminal
2
AV receiver
Projector
TV
Equipment with an HDMI terminal
After connecting
• Secure the HDMI cable to the HDMI cable holder, passing it through the holder. (Page 11)
• If desired, connect audio equipment. (Page 17)
• Load a disc and start playback. (Pages 23–28)
• Refer to AQUOS LINK function. (Pages 22 and 37)
14
Video Connections
Connecting to the Component Jacks
You can enjoy accurate color reproduction and high quality images through the component jacks.
STEPS
1
2
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect a component video cable (commercially available) to the component jacks (1 and 2).
This Player
CAUTION
(Red)
• You need to select the priority video output in
“Settings” – “Audio Video Settings” – “Video Out
Select”. (See page 36.)
• When the priority video output is set to “HDMI” in
“Video Out Select”, the video resolution which is output
from the COMPONENT VIDEO OUT jacks is the one
set in “HDMI Video Out”.
Red
(Blue)
Blue
(Green)
Green
• When the output from the COMPONENT VIDEO OUT
jacks is prioritized, set the priority video output to
“Component”.
To COMPONENT
VIDEO OUT jacks
1
Component video cable
(commercially available)
VCR
To COMPONENT
2
IN jacks
COMPO-
NENT IN
(Red)
Connect directly
PR
Red
Blue
(CR)
Blu-ray Disc
Player
LCD TV
(Blue)
PB
(CB)
(Green)
NOTE
Y
Green
• Connect the Blu-ray disc player to LCD TV directly.
If you play back the image via VCR, the image may
deteriorate due to the copy guard function.
• When you record the program where copyright
is protected, the copy guard function is activated
automatically; the program cannot be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is not
a malfunction. When you watch the program where
copyright is protected, we recommend that the Blu-ray
disc player be connected to LCD TV directly.
Projector
AV receiver
TV
Video equipment with component jacks
After connecting
• Connect audio equipment or the audio terminals of the TV. (Page 17)
15
Video Connections
Connecting to the Video Jack
You can enjoy the images through the video jack.
STEPS
1
2
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an AV cable (supplied) to the video jacks (1 and 2).
This Player
(Yellow)
Yellow
VCR
Connect directly
Blu-ray Disc
Player
LCD TV
To VIDEO output jack
1
2
NOTE
• Connect the Blu-ray disc player to LCD TV
directly. If you play back the image via VCR,
the image may deteriorate due to the copy
guard function.
AV cable (supplied)
• When you record the program where
copyright is protected, the copy guard
function is activated automatically; the
program cannot be recorded correctly.
Also, the playback image via VCR may
deteriorate due to this function. However,
this is not a malfunction. When you watch
the program where copyright is protected,
we recommend that the Blu-ray disc player
be connected to LCD TV directly.
To VIDEO input jack
(Yellow)
Yellow
Projector
AV receiver
TV
Video equipment with a video jack
After connecting
• Connect audio equipment or the audio terminals of the TV. (Page 17)
16
Audio Connections
Connecting to the Digital Audio Terminal or Audio Jacks
• You can connect audio equipment or the TV to the DIGITAL AUDIO OUT terminal or 2CH AUDIO output jacks.
• See page 44 for information on the output of next generation audio formats.
STEPS
1
2
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an optical digital cable (commercially available) or AV cable (supplied) to the optical digital audio
terminals or audio jacks (1 and 2, or 3 and 4).
This Player
• When using OPTICAL output,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
(Red)
NOTE:
Red
7.1 ch Audio is available via the HDMI
terminal.
White
To OPTICAL output
terminal
(White)
1
To 2CH AUDIO
output jacks
3
Optical digital cable
(commercially available)
AV cable (supplied)
To AUDIO
input jacks
4
To OPTICAL
input terminal
(White) (Red)
2
White Red
TV
Amplifier
Audio equipment with a digital audio input terminal or audio jacks
After connecting
• Load a disc and start playback. (Pages 23–28)
17
Broadband Internet Connection
Connecting to the ETHERNET terminal
• You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-
LIVE compatible discs. Refer to pages 25 and 38 regarding further information on BD-LIVE functions.
• When using the internet, a broadband internet connection as shown below is required.
STEPS
1
2
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect a LAN cable (commercially available) to the ETHERNET terminal (1 and 2).
This Player
To ETHERNET
terminal
1
CAUTION
• When using a broadband internet connection, a contract
with an internet service provider is required. For more
details, contact your nearest internet service provider.
• Refer to the operation manual of the equipment you have
as the connected equipment and connection method may
differ depending on your internet environment.
LAN cable
(commercially available)
NOTE
• Use a LAN cable/router supporting 10BASE-T/100BASE-
TX.
To LAN terminal
2
LAN
Internet
Modem
Hub or broadband router
PC
Example of a Broadband Internet Connection
After connecting
• Perform the communication setting. (Pages 39–41)
• Load a BD-LIVE compatible disc and play back the contents. (Pages 23 and 25)
18
Disc Playback
Before Starting Playback
Loading the Batteries in the
Remote Control
Approximate operating range of
remote control
Remote control sensor
1
Hold in the tab on the battery cover and pull the
cover towards the direction of the arrow.
30º
30º
2
Load the two “AA” size batteries (R-06 size,
UM/SUM-3). Place batteries with their terminals
corresponding to the m and n indications in
battery compartment.
7 m
Remote control unit
3
Insert the smaller tab of the battery cover into
the opening 1, and press down on the cover
until it clicks in place 2.
Connecting the Power Cord
Plug the supplied AC cord into the AC IN terminal on
the rear of the Player. Then plug into AC outlet.
NOTE
• Do not subject the remote control unit to shock, water or
excessive humidity.
• The remote control unit may not function if the Player's
remote sensor is in direct sunlight or any other strong light.
• Incorrect use of batteries may cause them to leak or burst.
Read the battery warnings and use the batteries properly.
• Do not mix old and new batteries, or mix different brands.
• Remove the batteries if you will not use the remote control
unit for an extended period of time.
To AC IN terminal
To AC outlet
NOTE
• Place the Player close to the AC outlet, and keep the
power plug within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH THE UN-INSULATED PARTS OF ANY CABLES
WHILE THE AC CORD IS CONNECTED.
• The ON/STANDBY indicator blinks while the Player is
preparing for starting up. You cannot turn the Player on
until the ON/STANDBY indicator stops blinking.
• If you are not going to use this Player for a long period of
time, be sure to remove the AC cord from the AC outlet.
19
Before Starting Playback
Turning the Power On
Indicators on the Player
ON/STANDBY indicator
Green on
Red blinks
Red on
Power on
Preparing for standby
Standby
AQUOS PURE MODE indicator
Green on Output in AQUOS PURE
MODE (See page 22.)
BD/DVD/CD mode indicator
Off
No disc
Blue on
White on
White blinks
Playing back
Disc stopped
Loading a disc
• When you turn on the power, the Menu screen
automatically displays for a while.
Press EXIT to erase the display.
POWER
ON/STANDBY indicator
AQUOS PURE MODE indicator
BD/DVD/CD mode indicator
Turning the power on
Press POWER on the remote control or on the Player
to turn on the power of the Player.
Entering standby
Press POWER on the remote control or on the Player
to enter standby.
• If you press POWER again immediately after entering
standby, the Player may not turn on. If this happens, wait
for 10 seconds or more and then turn on the power again.
NOTE
• When the ON/STANDBY indicator is blinking (may take
some time), the Player cannot be turned on.
20
Before Starting Playback
Language Setting
Operating a SHARP TV Using the
Remote Control
The Universal Remote Control may operate the basic
functions of the SHARP TV.
TV function control
• TV Power: POWER
• TV-AV Selector: INPUT
• TV Volume up/down: VOL e/f
• TV Channel up/down: CH r/s
Changing the on-screen display
language
1
Press SETUP to display the Setup Menu screen.
2
Press a/b/c/d to select “On Screen
Language”, then press ENTER.
Displays The Title List
Settings
On Screen Language
Picture
3
Press a/b to select the language you want to
display on the screen, then press ENTER.
English
Español
Français
NOTE
• To select the DVD disc language, such as subtitle
language, etc., see page 24.
21
Before Starting Playback
Turning Off the LCD Backlight and
Indications
Using AQUOS LINK
Controlling the Blu-ray disc player
using AQUOS LINK
If you feel that the indicators on the Player are too
bright when watching movies, you can turn them off
except for the ON/STANDBY indicator.
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics Control), with
AQUOS LINK you can interactively operate this player with
your SHARP AQUOS TV.
What you can do with AQUOS LINK
When you connect this player to the LCD TV compatible
with AQUOS LINK using an HDMI cable, you can perform
the function listed below. (See page 14 for connecting to the
HDMI terminal).
Automatic input select function
When you start playback of this player, the input selector of
the LCD TV will automatically switch to the LCD TV input
terminal connected to the player and the playback image will
appear on the screen, even if you are watching a TV program.
1
2
Press SETUP to display the Setup Menu screen.
Press a/b/c/d to select “Settings”, then
press ENTER.
Press a/b to select “Front Display/LED”, then
press ENTER.
Automatic power off function
If you turn off the LCD TV when this player is in stop mode,
the power of this player will be turned off automatically. (In the
case, while playing back a disc, the power does not turn off.)
3
Audio Video Settings
Quick Start
Auto Power Off
AQUOS LINK
Automatic power on function
When you switch to the LCD TV input terminal connected
to this player, the power of this player will be turned on
automatically.
AQUOS PURE MODE
Playback Setting
Communication Setup
Front Display/LED
Version
USB Memory Management
Software Update
System Reset
When you connect this player to an AQUOS LCD TV
compatible with AQUOS LINK and set “AQUOS LINK” to
“Yes” (page 37), images automatically adjusted to the most
suitable image quality for the AQUOS TV are output from the
HDMI OUT terminal of this player.
The AQUOS PURE MODE indicator on the player lights in
green.
AQUOS PURE MODE indicator
4
5
Press c/d to select “On” or “Off”, then press
ENTER.
Press SETUP or EXIT to exit.
NOTE
• In order to make AQUOS LINK available, set up AQUOS
LINK on the LCD TV that is connected to this player. See
page 37 regarding the setup of this player.
Refer to the Operation Manual of the TV for details
regarding setup.
22
BD/DVD/CD Playback
This section explains playback of commercially
available BD Video and DVD Video discs (like movies),
CDs, and recorded DVD-RW/R discs.
To stop playback
Press H STOP.
Resume playback function
• If you press d PLAY next, playback will resume from
the point where the Player was previously stopped. To
playback from the beginning, cancel resume mode by
pressing H STOP, then press d PLAY. (This may not
work depending on the type of disc. In this case, open the
disc tray or enter standby.)
Loading a Disc
NOTE
• Resume playback may not function depending on the disc.
POWER
OPEN/CLOSE
Displaying the disc information
1
2
3
Press POWER to turn on the power.
Press OPEN/CLOSE to open the disc tray.
Load a disc on the disc tray.
• Insert the disc with the label face up.
• In case of disc recorded on both sides, face down the
side to play back.
Press DISPLAY during playback.
• Each time you press DISPLAY, the display switches
as follows.
Disc Information Screen A
BD-VIDEO
1
2
1/1
3
4
1/101
00:00:12
/03:12:28
4
Press OPEN/CLOSE to close the disc tray.
BD/DVD Video Playback
BD VIDEO
BD-RE
DVD-R
BD-R
DVD-RW
Disc Information Screen B
DVD VIDEO
00:00:12
/03:12:28
4
This player supports DVD upscaling during DVD
playback.
No Display
1
2
Load a disc.
• Playback may begin automatically, depending on the
disc.
1 Type of disc
2 Title number being played / Total number of Titles
3 Chapter number being played / Total number of
• Playback begins from the first title.
• The menu may be displayed first, depending on the
disc. Perform playback operation by following the
directions on the screen.
Chapters
4 Elapsed playback time / Total playback time for the
Title
Press d PLAY if playback does not begin
automatically or playback is stopped.
NOTE
• Disc Information Screen A disappears after about 1 minute
elapses without performing any operations.
• For some commercially-released BD VIDEO discs, the total
playback time display for the Chapter/Title may not appear.
NOTE
• The disc load time may vary depending on the disc.
23
BD/DVD/CD Playback
BD/DVD Menus
Using the disc menu
• This section explains how to play back a BD/DVD
video disc with a top menu, disc menu or pop-up
menu.
• The titles listed in the top menu and a disc guide (for
options like subtitles and audio languages) are given
in the disc menu.
DVD VIDEO
Example: Select “SUBTITLE LANGUAGE”.
1
Press TOP MENU/TITLE LIST.
• The disc menu screen is displayed if present on the
DVD video disc.
2
Press a/b to select “SUBTITLE LANGUAGE”,
then press ENTER.
• The screen for selecting the subtitle language is
displayed.
MENU
1
2
3
AUDIO LANGUAGE
SUBTITLE LANGUAGE
AUDIO
Start playback by selecting a title
from the top menu
BD VIDEO DVD VIDEO
3
4
Press a/b to select the subtitle language, then
press ENTER.
1
Press TOP MENU/TITLE LIST.
• The top menu screen is displayed if present on the
BD/DVD video disc.
Press TOP MENU/TITLE LIST to exit.
Using the pop-up menu
T O P M E N U
BD VIDEO
1
3
2
Jazz
Latin
1
Press POP-UP MENU during playback.
• The pop up menu screen is displayed.
4
Classic
Rock
• The menu contents displayed vary depending on the
disc. For details on how to see and operate the pop-
up menu, refer to the manual for the disc.
2
Press a/b/c/d to select the title, then press
ENTER.
• The selected title is played back.
Pop-up menu
NOTE
• The procedure explained on this page is the basic
operation procedure. Procedures vary depending on
the BD/DVD video disc, so you may need to follow the
instructions in the BD/DVD video disc manual or the
instructions displayed on the screen.
Previous page
Next page
2
3
Press a/b/c/d to select the desired item,
Top menu
then press ENTER.
• With some BD/DVD discs, the top menu may be referred
to as the “Title Menu”. Use TOP MENU/TITLE LIST on
the remote control when the instructions refer to “Title
Menu”.
Press POP-UP MENU to exit.
• The pop-up menu will automatically disappear for
some discs.
• If no top menu is available, the TOP MENU/TITLE LIST
button will have no effect.
24
BD/DVD/CD Playback
1
Press PinP during playback to show the 2-
picture screen.
Enjoying BONUSVIEW or BD-LIVE
BD VIDEO
This Player is compatible with additional functions of
BD-Video, BONUSVIEW (BD-ROM Profile 1 Version
1.1) and BD-LIVE.
For BD-Video discs compatible with BONUSVIEW, the
functions of Picture in Picture and Virtual Package are
available. For BD-LIVE compatible discs, you can enjoy
a variety of functions via the internet in addition to the
BONUSVIEW functions.
Primary
audio/video
Secondary
audio/video
2
To remove the secondary video, press PinP
Virtual Package/BD-LIVE data is saved in Local
Storage (USB memory device connected to this
Player). To enjoy these functions, connect a USB
memory device (2GB or greater) supporting USB
2.0 High Speed (480Mbit/s) to the BD STORAGE/
SERVICE terminal (page 11) on the back of this player.
• If there is insufficient storage space, the data will not be
copied/downloaded. Delete unneeded data or use a new
USB memory device.
again.
NOTE
• To listen to secondary audio, make sure that “Secondary
Audio” is set to “On”. (See page 36.)
• The secondary audio and video for Picture In Picture may
automatically play back and be removed depending on the
content. Also, playable areas may be restricted.
• If a USB memory device containing other data (previously
recorded) is used, the video and audio may not play back
properly.
• If the USB memory device is disconnected from this player
during playback of Virtual Package/BD-LIVE data, playback
of the disc will stop.
• Some time may be required for the data to load (read/
write).
• Refer to “USB Memory Management” on page 42 for
erasing the Virtual Package data and the BD-LIVE data in
the USB memory device.
Virtual Package
For BD-Video discs compatible with Virtual Package,
data is copied from the discs or internet to local
storage. It is automatically copied to the local storage
prior to playback. You can enjoy a variety of additional
functions including secondary video, secondary audio,
subtitles, movie trailers, etc.
• The playback methods vary depending on the disc. For
details, refer to the disc manual.
NOTE
• SHARP cannot guarantee that all brands’ USB memory
devices will operate with this player.
BD-LIVE
• Do not use a USB extension cable when connecting a USB
memory device to the BD STORAGE/SERVICE terminal of
the player.
− Using a USB extension cable may prevent the player
from performing correctly.
In this Player, a variety of contents with interactive
functions are available through BD-LIVE compatible Blu-
ray discs by connecting to the internet. You can enjoy
the download of bonus features such as latest movie
trailers to the USB memory device, communication
compatible BD-J interactive games, etc.
• The available functions differ depending on the disc.
Use of Picture in Picture function
(secondary audio/video playback)
NOTE
• Regarding playback method of BD-LIVE contents, etc.,
perform the operations in accordance with the instructions
in the BD disc manual.
BD-Video that includes secondary audio and video
compatible with Picture in Picture can be played back
with secondary audio and video simultaneously as a
small video in the corner.
• To enjoy BD-LIVE functions, perform the broadband
internet connection (page 18) and communication settings
(pages 39–41).
• Refer to page 38 regarding the setup to restrict access to
BD-LIVE contents.
25
BD/DVD/CD Playback
NOTE
DVD-R/-RW/BD-RE/-R Playback
• The Title List screen also can be displayed by pressing
TOP MENU/TITLE LIST when playback is stopped or by
pressing ENTER after choosing “Displays The Title List”
in Setup Menu when playback is stopped.
DVD-R DVD-RW
BD-RE
BD-R
You can play back a recorded disc (DVD: VR format
finalized disc only / BD: BDAV format disc only).
About Title List
• The Title List can be displayed in two types, Thumbnail and
Title Name.
• Each time you press A (Red), the screen changes between
Thumbnail and Title Name.
Thumbnail
Program 1
1
5/21 Fri 9:30 AM 110 Min.
Program
1
Program
2
Program
3
Program
4
Program
5
Program
6
A
B
C
D
3
Title Name
By Chapter
Playlist
Functions
NOTE
• “Finalize” refers to a recorder processing a recorded disc
so that it will play in other DVD players/recorders as well
as this player. Only finalized DVD discs will play back in
this player. (This player does not have a function to finalize
discs.)
Title Name
Program 1
5/21 Fri 9:30 AM 110 Min.
[From Old]
1
2
Playback by selecting a title
1 Program 1
2 Program 2
3 Program 3
4 Program 4
5/21 Fri
6/15 Fri
7/3 Mon
9/18 Thu
110 Min.
110 Min.
56 Min.
40 Min.
1
Load a recorded disc.
• The Title List screen is displayed.
Program
1
Program
2
Program
3
A
B
C
D
Playlist Functions
Thumbnail
Sorting
3
Program
4
Program
5
Program
6
1 Information of selected title
2 Title Name
Recording Date
Recording Duration
3 Caption for Color Button
• When loading a BD disc with usage restrictions placed
by a BD recorder, the password input screen appears.
Then, input your password.
If you input a wrong password three times, the disc
tray will open. Close the disc tray, and then input a
correct password.
• If the Title List screen is not displayed, press TOP
MENU/TITLE LIST.
2
3
Press a/b/c/d to select the desired title, then
press ENTER.
• When seven or more titles are displayed, switch pages
by pressing KSKIP/k or LSKIP/l.
• Playback of the selected title will begin.
You can playback by pressing d PLAY instead of
pressing ENTER.
Press H STOP to stop playback.
26
BD/DVD/CD Playback
Playing back the title you stopped
while being played.
Playback by selecting a chapter
1
Press B (Green) while the Thumbnail screen is
displayed.
1
Press D (Yellow) while the Title List screen is
displayed.
• The chapter screen is displayed.
Playback
Chapter
1
Chapter
2
Chapter
3
From Beginning
From Continued
Chapter
4
Chapter
5
Chapter
6
• When seven or more chapters are displayed, switch
pages by pressing KSKIP/k or LSKIP/l.
• To return to the Thumbnail screen, press B (Green).
2
3
Press c/d to select the type of Playback, then
press ENTER.
• Playback of the title will begin.
2
3
Press a/b/c/d to select the desired chapter,
then press ENTER.
• Playback of the selected chapter will begin.
You can playback by pressing d PLAY instead of
pressing ENTER.
Press H STOP to stop playback.
Press H STOP to stop playback.
Sorting the titles
Each time you press B (Green) while the Title Name
screen is displayed, the Title Name display changes
between displaying the newest title first and the oldest
title first.
Playback by selecting a Playlist
1
Press C (Blue) while the Thumbnail screen is
displayed.
• The Playlist screen is displayed.
Program 1
5/21 Fri 9:30 AM 110 Min.
1 Program 1
2 Program 2
5/21 Fri
6/15 Fri
110 Min.
110 Min.
C
D
Original
Functions
2
3
Press a/b to select the title, then press
ENTER.
• Playback of the selected title will begin.
Press H STOP to stop playback.
27
BD/DVD/CD Playback
Audio CD Playback
Playback by selecting a track
AUDIO CD
1
Press a/b to select the track, then press
ENTER during playback or when playback is
stopped.
• Playback of the selected track will begin.
Select
Enter
Playback from the beginning
D
Functions
2
Press H STOP to stop playback.
1
Load an audio CD.
• The CD screen is displayed.
(The CD screen is displayed only when a compact
disc recorded in the CD-DA format is inserted.)
• Playback may begin automatically, depending on the
disc.
Operation procedure for the
“Functions” menu
1
Press D (Yellow) (Functions) when the CD screen
is displayed.
• The “Functions” menu is activated.
Select
Enter
D
Functions
2
3
Press d PLAY if playback does not begin
Select
Enter
Return
automatically or playback is stopped.
D
Track select
Press H STOP to stop playback.
2
Press a/b to select the desired setting, then
press ENTER.
• When playback is stopped, only “Track” can be
selected.
• For a description of each setting, see “Functions
which can be set” (Page 34).
Resume playback function
• If you press d PLAY next, playback will resume from
the point where the Player was previously stopped. To
playback from the beginning, cancel resume mode by
pressing H STOP, then press d PLAY. (This may not
work depending on the type of disc. In this case, open the
disc tray or enter standby.)
3
4
Press a/b/c/d to set, then press ENTER.
• Operations vary depending on the setting. Follow the
operation instructions on the screen.
Press n RETURN or D (Yellow) to exit the
“Functions” menu.
NOTE
• Resume playback may not function depending on the disc.
NOTE
• The displayed items vary depending on the disc.
28
Playback Functions
BD VIDEO
DVD VIDEO
AUDIO CD
BD-R
BD-RE
Slow Playback
DVD-R
DVD-RW
Slow Playback functions when L SKIP/l or
K SKIP/k is pressed for more than 2 seconds
during pause.
• Press d PLAY to return to normal playback.
NOTE
• This doesn't work for audio CDs.
• Reverse Slow Playback cannot be performed for BD video.
Repeat Playback of a Title or
Chapter (Repeat Playback)
1
2
3
Play back the title or chapter you want to repeat.
Press REPEAT.
Press c/d to select the type of Repeat
Playback.
• Playback Title: Repeats the title currently being played
back.
• Playback Chapter: Repeats the chapter currently
being played back.
NOTE
• Some operations in the following playback functions
cannot be performed depending on the specifications of
the disc.
• Scene Selection: Repeats the specified scene of title
or chapter.
Fast Forward/Reverse (Search)
Fast Forward/Reverse functions when G REV or
J FWD is pressed during playback.
Example: When J FWD is pressed
• The search speed will change each time you press the
button.
Playback Title
Playback Chapter Scene Selection
• Press n RETURN to cancel without setting the
type of Repeat Playback.
• For Audio CD, you can select “Playing Disc”, “Playing
Track” and “Specify The Part” as Repeat Playback
options.
When playing back a DVD
• You cannot fast forward or fast reverse from one title and
continue to another title (except when playing audio CDs).
Skipping to the Next or the Start of
the Current Chapter (Track)
4
Press ENTER.
Example: Repeat playback of a title (TITLE)
BD-VIDEO
Skipping (to the beginning of a chapter or track)
functions when T SKIP/k or U SKIP/l is
pressed during playback.
1/3
5/25
00:20:30
2 English
1
Pause/Frame Advance Playback
Pause functions when F PAUSE is pressed during
playback. (If you are playing back an audio CD, the CD
will also pause.)
1
5.1ch
On Title Repeat
Frame Advance Playback functions when U SKIP/l
is pressed during Pause.
• Frame Advance Playback may not function properly with
discs other than DVD-RW (VR format).
On Title Repeat
5
Press REPEAT to return to normal playback.
NOTE
• Some BD/DVD Video discs are not compatible with Pause/
Frame Advance Playback.
• Frame Advance/Reverse Playback can be performed for
DVD discs by pressing L SKIP/l or K SKIP/k
during pause.
29
Playback Functions
NOTE
• Press LSKIP/l, the Repeat Playback is cancelled
and the next chapter being play back.
• Press KSKIP/k once, the Repeat Playback is
cancelled and the player returns to the start of current
chapter (track).
• If you press KSKIP/k again (within about 5 seconds)
the player will skip to the beginning of the previous chapter
(track).
• For Partial Repeat Playback, set the start and end points
within the same title.
• Repeat Playback may be forbidden depending on the disc.
• Partial Repeat Playback may not work in multi-angle
scenes.
• If you press DISPLAY, you can confirm the Repeat
Playback status.
Displaying the Audio Information
You can display the audio information on the disc
currently being played back by pressing AUDIO.
• The displayed contents vary depending on the disc.
BD VIDEO
DVD VIDEO
Partial Repeat Playback (Repeat
Playback of a Specified Part)
The audio track currently being played back will be
displayed.
If multiple audio channels are recorded, you can switch
the audio channel by pressing AUDIO.
DVD VIDEO
AUDIO CD
DVD-R
DVD-RW
DVD-RW
DVD-R
NOTE
• Some operations in the following playback function cannot
be performed depending on the specifications of the disc.
When a recorded broadcast with stereo or
monaural audio is played back:
“Stereo” is displayed. (Audio cannot be switched.)
1
2
Press REPEAT during playback.
Press c/d to select “Scene Selection”, then
press ENTER.
• “Set Start Point” displays.
NOTE
• When you play a program recorded in stereo or monaural,
and if you are listening to the Bitstream sound via the digital
output jack, you cannot select the audio channel. Set
“Audio Out” to “PCM” (Page 37), or if you want to change
the audio channel, listen via the analog output jacks.
Playback Title
Playback Chapter Scene Selection
Set Start Point
Switching Subtitles
3
4
Press ENTER at the scene where you want to
set the start point.
If subtitles are provided in multiple languages, you can
switch between them.
• “Set End Point” displays.
Press SUBTITLE during playback.
Press ENTER at the scene where you want to
set the end point.
• You can press V FWD to fast forward to the scene
where you want to set the end point. When you
reach the desired scene, simply press I PLAY and
then ENTER to set the end point. To cancel Repeat
Playback, press REPEAT.
• The display indicates the subtitle number currently being
played back, and the subtitles appear.
Each time SUBTITLE is pressed, the subtitles change.
• “– –” is displayed if a disc has no subtitles.
• You can also select “Off”.
30
Playback Functions
Switching the Angle
Displaying the Angle Mark
If multiple angles are recorded, you can switch
between them.
You can change settings so that Angle Mark appears
in the right bottom part of the screen when multiple
angles are recorded. (The Angle Mark is only displayed
for DVD video.) The settings can be changed in
“Settings” - “Playback Setting” - “Angle Mark Display”
(Page 38).
NOTE
• Settings for audio and subtitles can be changed also in
Function Control screen (Page 33).
• The operations of subtitles, angle and audio differ
according to each disc. You may need to refer to the
operation manual of the disc.
• The following operations will not work when playing back
an audio CD:
Slow Playback, Frame Advance
Display of functions
1
2
Press FUNCTION during playback.
• The display for subtitles, angle or audio automatically
disappears after 5 seconds.
• The Function Control screen is displayed on the TV.
Press a/b to select the Angle Number column,
then press ENTER.
Switching between functions
• You can switch the subtitles and audio at the Function
Control screen (Page 33).
BD-VIDEO
• The operation for each function varies depending on the
disc. See the manual for the disc.
1/3
5/25
Fast Forward/Reverse
00:20:30
2 English
1
• You cannot perform Fast Forward/Fast Reverse between
titles. At the end or beginning of the title, Fast Forward/
Fast Reverse will be cancelled and normal playback will
automatically resume.
1
5.1ch
Off
• Subtitles are not played back with BD/DVD video discs
during Fast Forward and Fast Reverse.
Slow Playback
• You cannot perform Slow Playback between titles. At the
end of the title, Slow Playback will be cancelled and normal
playback will automatically resume.
3
4
Press a/b to select the desired Angle Number,
then press ENTER.
Repeat Playback
• “–” is displayed if a disc is recorded with only one
angle.
• Repeat Playback may be forbidden depending on the disc.
• Partial Repeat Playback may not work in multi-angle
scenes.
Press n RETURN or FUNCTION to close the
Function Control screen.
• For Partial Repeat Playback, set the start and end points
within the same title.
NOTE
• The displayed items vary depending on the disc.
• If you access the Function Control screen during playback
of a BD/DVD video, it may be impossible to operate the
BD/DVD video playback. In cases like this, close the
Function Control screen.
31
JPEG File Playback
CD-R
JPEG
CD-RW
4
5
Press T SKIP/k or U SKIP/l to replace
JPEG
one image with another.
•
The same operation can be performed by pressing
c/d or S REV/V FWD.
Press n RETURN if you wish to return to the folder
selection screen.
•
To stop the still image playback at any time,
press H STOP.
Playing back Slide Show
1
In Step 2 of the left side “Playing back still
images in a selected folder”, press d PLAY
(Slide Show).
•
The still images inside the selected folder are played
as a slide show.
2
3
To pause the playback at any time, press
F PAUSE.
•
Press d PLAY to resume playback.
To stop the playback at any time, press H STOP.
NOTE
•
Press n RETURN to play a slide show of still
images in another folder.
• This Player can play still images (JPEG files) that have been
recorded on CD-RW/R discs. For details on the still images
that you can play using this player, refer to “About the
JPEG file format” on page 7.
Setting slide show speed/repeat
playback
• During “Normal play”, still images are played one by one
while during “Slide show”, they are automatically replaced
one after another.
1
Press C (Blue) (Slide Show Menu) during the
folder selection screen.
•
The setting screen for “Slide Show Speed”/“Repeat
Mode Setting” appears.
Playing back still images in
sequence
2
Press a/b to select “Slide Show Speed”, then
press ENTER.
1
Load the disc containing the still images, and
press d PLAY.
• The first still image appears on the screen.
• Press T SKIP/k or U SKIP/l to proceed to
the next or previous still image.
Slide Show Speed
Repeat Mode Setting
Normal
The same operation can be performed by pressing
c/d or S REV/V FWD.
2
To stop the still image playback at any time,
press H STOP.
•
The slide show speed may be selected from “Fast”,
“Normal”, “Slow1” and “Slow2”.
3
4
Press a/b to select the desired speed, then
Playing back still images in a
selected folder
press ENTER.
Press a/b to select “Repeat Mode Setting”,
then press ENTER.
1
Load the disc containing still images, then press
SETUP.
Slide Show Speed
Repeat Mode Setting
2
3
Press a/b/c/d to select “Picture”, then press
ENTER.
Yes
No
Use a/b/c/d to select the folder whose still
images are to be played, then press ENTER.
5
6
Press c/d to select the desired item, then
8/15
press ENTER.
1/77
Press EXIT to exit.
32
Settings During Playback
Function control operation
procedure
Function Control
This allows you to adjust various settings at once, like
subtitles, angle settings and the title selection for Direct
Playback. You can adjust the video and audio to suit
your preferences. The operations are the same for BD
and DVD.
Function Control screen
BD-VIDEO
1
1/3
5/25
00:20:30
2
2 English
1
1
5.1ch
Off
1
Press FUNCTION during playback.
• The Function Control screen is displayed on the TV.
ENTER
Select
Enter
Return
2
Press a/b to select the desired setting, then
press ENTER.
• For a description of each setting, see “Functions
which can be set” (Page 34).
3
1 Playback status display
Shows the operation status and the disc type.
BD-VIDEO
1/3
5/25
00:20:30
2 English
1
2 Setting items
Selects a title (or track) or chapter for playback, or performs
video/audio settings.
• Title/Track Number (Direct Title/Track Skip)
• Chapter Number (Direct Chapter Skip)
• Playback Elapsed Time (Direct Time Skip)
• Subtitle Language
1
Off
5.1ch
• Angle Number
• Audio
• Repeat
3
4
Press a/b/c/d to set, then press ENTER.
• Operations vary depending on the setting. Follow the
operation instructions on the screen.
3 Operation guide display
Provides help on remote control button operations.
Press n RETURN or FUNCTION to close the
Function Control screen.
NOTE
• If “– –” is displayed for an option like title number or
subtitles, the disc has no titles or subtitles which can be
selected.
• The displayed items vary depending on the disc.
• If you access the Function Control screen during playback
of a BD/DVD video, it may be impossible to operate the
BD/DVD video playback. In cases like this, close the
Function Control screen.
33
Settings During Playback
Functions which can be set
Title/Track Number (Direct Title/Track Skip)
• Shows the title number being played back (or track number when playing back an audio
CD). You can skip to the start of the title (or track).
• To skip to the start of a selected title (or track), press the Number buttons to enter the
title (or track) number when this option is highlighted.
Chapter Number (Direct Chapter Skip)
• Shows the chapter number being played back. You can skip to the start of the chapter.
• To skip to the start of a selected chapter, press the Number buttons to enter the
chapter number when this option is highlighted.
Playback Elapsed Time (Direct Time Skip)
• Shows the time elapsed from the beginning of the current disc title (or track). This lets
you skip to a specific time.
• Press c/d to select the Hour, Minute or Second, then press a/b or the Number
buttons to set the time. Press ENTER to start playback at the set time.
Subtitle Language
• Shows the currently selected subtitle language. If subtitles are provided in other
languages, you can switch to your preferred language.
Angle Number
• Shows the currently selected angle number. If the video is recorded with multiple angles,
you can switch the angle.
Audio
• Shows the currently selected type of audio. You can select the desired type of audio.
Repeat
• The current Title (or Chapter) or partial segments can be repeatedly played back. Repeat
Playback is also possible with the REPEAT button on the remote control.
NOTE
• These functions may not work with all discs.
34
SSetEtingTs TINGS
Common operations
The “Menu” enables various audio/visual settings and adjustments on the functions using the remote control
unit. You need to call up the OSD to perform settings for this player. The following is the explanation for the basic
operations of the “Menu”.
Example: Setting “Front Display/LED”
1
3
2
Display the Menu screen
Select a menu item
Press SETUP to display
Press a/b to select “Front Display/
LED”, then press ENTER.
the Setup Menu screen.
Press a/b/c/d to select
“Settings”, then press
ENTER.
Audio Video Settings
Quick Start
Auto Power Off
AQUOS LINK
Playback Setting
Communication Setup
Front Display/LED
Version
USB Memory Management
Software Update
System Reset
Displays The Title List
On Screen Language
Settings
Picture
Select the next item
Press c/d to select the desired item,
then press ENTER.
4
On
Off
Exit the Menu screen
Press n RETURN to return to the
previous “Menu” page.
Press SETUP or EXIT to exit.
2 Enter a 4-digit number for the password, then
Basic Operation for Playback Setting
the same 4-digit number for confirmation.
Example: Setting “Parental Control” under “Playback Setting”
3 Press ENTER to complete the password setting
1
2
Press SETUP to display the Setup Menu screen.
Press a/b/c/d to select “Settings”, then
press ENTER.
procedure and move to the next setting screen.
6
Press c/d to select the parental control level
for DVD VIDEO, BD-ROM, and then select the
country code. Press ENTER after making each
selection.
3
4
Press a/b to select “Playback Setting”, then
press ENTER.
Press a/b to select “Parental Control”, then
press ENTER.
• When you operate this Player for the first time, the
password setting screen will be displayed. See “When
setting the password for the first time” below.
Parental Control
Disc Language
Angle Mark Display
Level 3
0
Password Setting
BD Internet Access
5
Enter your 4-digit password.
• You cannot move to the next setting screen until you
can input the correct password.
USA
When setting the password for the first time.
7
Press SETUP or EXIT to exit.
1 To set the password for the first time, press c/d
to select “Yes” to enter the password setting
menu, then press ENTER.
35
SETTINGS
Audio Video Settings
Video Out Select
This function allows you to select the priority video
output when you connect video equipment such
as a TV to both the HDMI OUT terminal and the
COMPONENT VIDEO OUT jacks.
TV Aspect Ratio
You can set the screen aspect ratio of the connected
TV, and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected
TV changes, you will have to change the “TV Aspect
Ratio” setting.
Item
HDMI, Component
• When the priority video output is selected, video is output
from the other video terminal with the resolution of the
selected video output.
Item
• There is no output from the COMPONENT VIDEO OUT
jacks and VIDEO output jack when video is output at
1080p resolution and the priority video output is selected
to “HDMI”.
• If the video equipment connected to each of the terminals
is not compatible with the resolution of the priority video
output, abnormalities in images on the screen may appear.
Wide 16:9: Select this when connecting to a TV with a
16:9 screen aspect ratio.
Normal 4:3: Select this when connecting to a TV with a
4:3 screen aspect ratio.
<When selecting Normal 4:3>
Item
Letter Box: If you connect to a TV with a screen aspect
ratio of 4:3 and playback a DVD with 16:9 video, the
video will be played back with black bands at the top
and bottom while maintaining the 16:9 ratio.
Pan Scan: If you connect to a TV with a screen aspect
ratio of 4:3 and playback a DVD with 16:9 video, the
video will be played back with the left and right sides of
the image cut off to display in 4:3 screen aspect ratio.
(This function works if the disc is labelled for 4:3PS.)
Secondary Audio
This toggles the clicking sound on the menu and audio
with secondary video in picture in picture mode for
BD-Video.
• Select “Off” when enjoying the high quality sounds of BD-
Video.
Item
On, Off
Component Video Out
This sets the resolution of the component video
output.
Some TVs are not fully compatible with the Blu-ray
disc player, which may cause the image distortion.
In this case, press VIDEO OUTPUT RESET on the
remote control for five seconds. “Component Video
Out” will be reset to “480i” (factory preset value).
Item
1080i, 720p, 480p, 480i
HDMI Video Out
This sets the resolution of the HDMI video output.
Some TVs are not fully compatible with the Blu-ray
disc player, which may cause the image distortion.
In this case, press VIDEO OUTPUT RESET on the
remote control for five seconds. “HDMI Video Out” will
be reset to “Auto” (factory preset value).
Item
Auto, 1080p, 1080i, 720p, 480p
NOTE
• When the BD player is connected to a 1080p 24Hz
compatible TV and the “HDMI Video Out” is set to
“Auto”, 1080p 24Hz will automatically be displayed when
compatible discs are played back.
At 1080p 24Hz/1080p 60Hz, there is no output from the
COMPONENT VIDEO OUT jacks and VIDEO output jack.
36
SETTINGS
Audio Out
Dynamic Range Control
You can set the audio output when connecting to
SURROUND equipment.
This lets you adjust the range between the loudest
and softest sounds (dynamic range) for playback
at average volume. Use this when it is hard to hear
dialog.
1
This sets the audio output connected to
SURROUND equipment.
Item
Item
Normal: The same audio output range is played as the
original recorded audio output range.
Shift*: When Dolby Digital audio is played back, the
dynamic range of the audio is adjusted so that the
dialog portion can be heard easily. (If the audio sounds
abnormal, set to “Normal”.)
HDMI Output: Select this when you connect using HDMI
OUT terminal.
Digital Output: Select this when you connect using
DIGITAL AUDIO OUT terminal (OPTICAL).
2ch Audio Output: Select this when you do not use
SURROUND sound equipment.
Auto: When you play back audio in the Dolby TrueHD
format, the dynamic range is automatically adjusted.
2
You can set the audio output mode for each
output terminal.
*
Lower the audio volume before setting. If you do not do so,
the speakers may emit a loud sound or excessive output
may be applied to the speakers.
1 This sets the audio output mode for HDMI OUT
terminal when selecting “HDMI Output”.
Quick Start
NOTE
• When the secondary audio is set to “On”, PCM is
automatically selected as the audio output mode.
This turns the Quick Start function on and off.
When the Quick Start function is on:
• The startup time of the Player is reduced.
• However, power consumption will increase.
When the Quick Start function is off:
• The player will enter the low power consumption mode
when in standby condition.
Item
Bitstream:
• Select this when connecting to
HDMI equipment with a built-in
decoder for DOLBY DIGITAL, etc.
• Setting to Bitstream will output
each audio signal by Bitstream.
• Select this when connecting to
multi-channel HDMI equipment.
• Setting to PCM (Surround) will
output by LINEAR PCM by
Item
Yes, No
PCM (Surround):
NOTE
decoding audio signals recorded in
each audio output mode such as
DOLBY DIGITAL, DTS.
• When “Quick Start” is set to “Yes”, the Player requires
some time to turn off.
Auto Power Off
2 This sets the audio output mode for DIGITAL
AUDIO OUT (OPTICAL terminal) when selecting
“Digital Output”.
This sets the Player so that power is automatically shut
off if playback is stopped for about 10 minutes.
Item
Yes, No
Item
• Select this when connecting to
SURROUND equipment with
a built-in decoder for DOLBY
DIGITAL, etc.
Bitstream:
• Setting to Bitstream will output
each audio signal by Bitstream.
• Select this when connecting to 2
channel stereo audio equipment.
• Setting to PCM will output by
converting each audio signal into
PCM 2 channel audio signal.
AQUOS LINK
This lets you set the Player to receive the control signal
from the AQUOS LINK remote control via the HDMI
cable.
PCM:
Item
Yes, No
NOTE
• See page 44 for information on output of next generation
audio formats.
NOTE
• For details, refer to the operation manual of TV.
37
SETTINGS
Password Setting
Playback Setting
This sets the password for setting or changing the
Parental Control Level.
Parental Control
This lets you set the Parental Control depending on the
disc content. The available Parental Control Levels are
shown below.
Item
Yes: Enter the 4-digit number.
No
The 4-digit password number needs to be entered
before the Parental Control Levels and the Country
Code are set. The Parental Control Levels and the
Country Code cannot be set if a password has not
been created or the password is not entered.
NOTE
• When you forget the password, you can reset the current
password using “System Reset” under “Settings”. (See this
page.)
• You can also set the new password if desired.
Item (For DVD-VIDEO)
8 and Off: All DVD-video can be played.
1-7: Prohibits play of DVD-video with corresponding
ratings recorded on them.
BD Internet Access
This allows you to set access restriction to BD-LIVE
contents.
Item (For BD-ROM)
Item
No Limit: All BD-video can be played.
0-99 year(s): Prohibits play of BD-video with corresponding
ratings recorded on them.
Permit: Allows all BD-LIVE discs.
Limit: Allows only discs with owner certification.
Prohibit: Prohibits all BD-LIVE discs.
Item (Country code)
Sets the country code. Refer to the Country Code List
(page 44) because the ratings differ according to the
country.
NOTE
• The available functions differ depending on the disc.
• Regarding playback method of BD-LIVE contents, etc.,
perform the operations in accordance with the instructions
in the BD disc manual.
NOTE
• To enjoy BD-LIVE functions, perform the broadband internet
connection (page 18) and communication settings (pages
39–41).
• Refer to “Basic Operation for Playback Setting” on page 35
for details.
Disc Language (Disc Priority Language)
Front Display/LED
This lets you select the language for subtitles, audio
and menus displayed on the screen.
If you feel that the indicators on the Player are too
bright when watching movies, you can turn them off
except for the ON/STANDBY indicator.
Item
Item (Subtitle)
Refer to the Language List. (Page 44)
On, Off
Item (Audio)
Refer to the Language List. (Page 44)
Version
Item (Menu)
Refer to the Language List and Language Code List.
(Page 44)
When you select “Version”, the system software
version is displayed.
System Reset
Angle Mark Display
You can reset all settings to the factory presets.
This lets you turn the Angle Mark Display on or off
when DVD video recorded with multiple angles is
played back. (The Angle Mark is displayed in the lower
right screen.)
Item
Reset, Not Reset
Item
Yes, No
38
SETTINGS
5
For setting the IP address, press c/d to select
“Yes” or “No”, then press ENTER.
Communication Setup
This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions that connect to the internet.
Do you obtain the IP address
automatically?
Yes
No
IP Address
Netmask
Gateway
NOTE
• Make sure that the LAN cable is connected to this Player.
(See page 18.)
• For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
− IP address, netmask, gateway, DNS IP address
• Besides, if specifying a proxy server, the following
information specified from your internet service provider is
also required. Confirm the information prior to the setting.
− IP address and port number of the proxy server
Next
• If selecting “Yes”: The IP address is automatically
obtained.
• If selecting “No”: The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 41.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
6
7
Select “Next”, then press ENTER.
For setting the DNS IP address, press c/d to
select “Yes” or “No”, then press ENTER.
Do you obtain the DNS IP address
automatically?
Yes
No
Primary
Secondary
Next
1
2
Press SETUP to display the Setup Menu screen.
Press a/b/c/d to select “Settings”, then
press ENTER.
Press a/b to select “Communication Setup”,
then press ENTER.
Press c/d to select “Change”, then press
ENTER.
• If selecting “Yes”: The DNS IP address is automatically
obtained. (The DHCP server function of the router or
modem is used for the automatic acquisition.)
• If selecting “No”: The primary and secondary IP
addresses are entered using the screen for inputting
characters. (See page 41.)
3
4
Regarding each of the setup values, confirm the
specifications of your broadband router.
Current Ethernet setup info.
8
9
Select “Next”, then press ENTER.
For setting the proxy server, press c/d to
select “Yes” or “No”, then press ENTER.
IP Address : Auto Setup
Netmask : Auto Setup
Gateway
DNS
Proxy
: Auto Setup
: Auto Setup
: Not Use
Do you use the proxy server?
Yes
No
Change
Initialize
Address
Port
• For initializing the current setting, select “Initialize”,
then press ENTER.
Next
• If selecting “Yes”: The IP address or proxy server
name and port number for the proxy server specified
from your internet service provider are entered using
the screen for inputting characters. (See page 41.)
• If selecting “No”: Go to the next step.
(Continued on the next page)
39
SETTINGS
10 Select “Next”, then press ENTER.
11 For the advanced setting (the setting of the
Ethernet connection speeds), press c/d to
select “Yes” or “No”, then press ENTER.
• Normally select “No”, then press ENTER.
• The Ethernet connection speeds can be set when you
select “Yes”, then press ENTER.
• As automatic detection is made (factory preset
mode), this setting is not normally necessary. If a
situation occurs in which the Ethernet connection fails,
etc., change the setting and confirm if the Ethernet
connection successfully works.
When the connection speed is set, select “Next”, then
press ENTER.
Option
Ethernet Connection Speeds
Yes
No
Auto-Detection
10M Half Duplex
100M Half Duplex
10M Full Duplex
100M Full Duplex
Next
12 For testing the connection to the internet, after
confirming the settings, press c/d to select
“Test”, then press ENTER.
• “Test” is available only when setting to obtain the IP
address automatically. “Test” cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
IP Address : xxx xxx xxx xxx
Netmask
Gateway
: xxx xxx xxx xxx
: xxx xxx xxx xxx
DNS Address : xxx xxx xxx xxx
MAC Address : xx:xx:xx:xx:xx:xx
Test
Complete
• As a result of the test, if the internet connection fails,
enter the setup values manually.
13 Press c/d to select “Complete”, then press
ENTER.
40
SETTINGS
3
4
Press c/d to select a number/character, then
The operation procedure for
inputting characters manually
press ENTER.
Repeat the step 3 to display all of the desired
characters/numbers in the input field.
NOTE
• Numeric characters such as IP address can be entered on
the input screen either by selecting each of the characters
in the “Numeric” mode or using the Number buttons on
the remote control.
Example: The screen for inputting numeric characters
123
Numeric
Edit
1
2
3
4
5
6
7
8
9
0
IP Address
Netmask
Gateway
123
NOTE
• Press n RETURN (Del.Char.) to delete a number/
character you have input.
• To change a number/character you have input, press B
(Green) (Left) or C (Blue) (Right) to select the number/
character you want to change, and press n RETURN
(Del.Char.). Then, press c/d to select a new number/
character you want to input, and press ENTER.
1
2
Press ENTER at the boxes in which characters
are to be entered, and the input screen will
appear.
Numeric
Edit
5
Press D (Yellow) (Complete) to fix the numbers
which have been input.
1
2
3
4
5
6
7
8
9
0
IP Address
Netmask
Gateway
123
Selected by
pressing a/b
Selected by
pressing c/d
Press a/b to select the desired input mode.
• When inputting the address of the proxy server;
“1ABC” (Alphabet/numeric character) / “Sign” / “Edit”
• When inputting other values (IP address, etc.);
“Numeric” / “Edit”
6
Repeat step 1 to 5 to finish inputting all the
required characters.
Input character list
1ABC (Alphabet/
numeric character)
Num.
ABC
DEF
GHI
JKL
MNO PQRS
TUV
DEF
WXYZ
Spc.
Num.
GHI
1 2 3 4 5 6 7 8 9 0
G H I g h i
ABC
A B C a b c
J K L j k l
D E F d e f
JKL
TUV
MNO
M N O m n o
W X Y Z w x y z
PQRS
Spc.
P Q R S p q r s
(space)
T U V t u v
WXYZ
Numeric
Sign
1 2 3 4 5 6 7 8 9 0
@ . , :
; _ - \ $ % ! ? & # + * = / | ˜
“ ‘ ˆ `
( ) < >
[ ]{ }
Spc.
@ . , :
& # + *
( ) < >
@
&
(
.
,
:
; _ - \
= / | ˜
;
_
-
|
\
˜
$ % ! ?
“ ‘ ˆ `
$
“
%
!
?
#
+
*
=
[
/
‘
ˆ
`
)
<
>
[
]{
}
]
{
}
Spc.
(space)
Edit
Cancel
Left
Right
Complete
Del.Char.
*
The same operation as the colored buttons and n RETURN can be performed by selecting
each of the items and pressing ENTER.
“Del.Char.” stands for deleting characters.
41
SETTINGS
USB Memory Management
The following instructions explain how to delete data
such as the Virtual Package data and the BD-LIVE
data in a USB memory device.
1
Insert the USB memory device into the BD
STORAGE/SERVICE terminal on rear of this
player.
2
3
Press SETUP to display the Setup Menu screen.
Press a/b/c/d to select “Settings”, then
press ENTER.
4
Press a/b to select “USB Memory
Management”, then press ENTER.
• “No USB Memory” appears when no USB memory is
inserted.
5
Press a/b, select “Erase” or “Format”, then
press ENTER.
Erase: Deletes only BD-VIDEO data contents.
Format: Deletes all contents.
Erase
Erases BD-VIDEO data on USB memory.
Format
Erase all contents on USB memory
including protected contents.
Before using the USB memory device
CAUTION:
NOTE
• Do not remove the USB memory device or unplug
the AC cord while the operations for “USB Memory
Management ” or “Software Update” are being
performed.
• Data which has been saved to the player’s internal memory
(game score, etc.) will also be deleted.
6
Press c/d, select “Yes”, and press ENTER.
• Do not use a USB extension cable when connecting
a USB memory device to the BD STORAGE/SERVICE
terminal of the player.
− Using a USB extension cable may prevent the player
from performing correctly.
Yes
No
NOTE:
7
Start the process.
• The screen for the current operation will display.
• SHARP cannot guarantee that all brands’ USB memory
devices will operate with this player.
Complete
OK
8
Press ENTER.
42
SETTINGS
• If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
Software Update
This function allows software updates by inserting a
USB memory device with the update file into the BD
STORAGE/SERVICE terminal on this player.
To check for the availability of a software
questions, please call 1-800-BE-SHARP (800-237-
4277).
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct device.
1
Insert the USB memory device with the update
file into the BD STORAGE/SERVICE terminal on
rear of this player.
OK
2
3
Press SETUP to display the Setup Menu screen.
Press a/b/c/d to select “Settings”, then
press ENTER.
Press a/b to select “Software Update”, then
ENTER.
• If you have not yet set the password, go to step 6.
There is more than one software file
in the USB memory device.
Confirm that only the software update file is
in the USB memory device.
4
OK
5
Enter the 4-digit number using 0-9.
8
Press ENTER to start updating.
• The screen becomes dark for a while until the update
screen can be displayed. Please wait for the update
screen to appear. Do not unplug the AC cord.
Enter 4-digit password
The picture will temporarily go dark until
the software update display appears.
Wait several minutes and do not unplug the AC cord.
6
7
Press ENTER to start checking data in the USB
memory device.
Insert USB memory device containing
the software update file.
OK
OK
Now updating
During the data checking, “Checking” blinks.
Now checking the data in USB memory device.
Do not unplug AC cord.
Update Version
*
**1234567-2
30%
Checking
9
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If the update has failed, check the file in the USB
device and try Software Update again.
• The current version of this unit software and the
version of the update file on the USB memory device
are displayed. To update this player software with
update file, select “Yes”, and press ENTER.
10 Press POWER to turn off the player.
11 Remove the USB memory device.
Software update file is detected in the USB memory device.
Start update?
Current Ver. :
Update Ver. :
**1234567
**1234567
Yes
No
43
SETTINGS
Country Code List
USA / CANADA / JAPAN / GERMANY / FRANCE / UK / ITALY / SPAIN / SWISS / SWEDEN / HOLLAND / NORWAY /
DENMARK / FINLAND / BELGIUM / HONG KONG / SINGAPORE / THAILAND / MALAYSIA / INDONESIA / TAIWAN /
PHILIPPINE / AUSTRALIA / RUSSIA / CHINA
Language List
English / Français / Deutsch / Italiano / Español / Japanese / Svenska / Nederlands
Language Code List
AA Afar / AB Abkhazian / AF Afrikaans / AM Ameharic / AR Arabic / AS Assamese / AY Aymara / AZ Azerbaijani / BA Bashkir /
BE Byelorussian / BG Bulgarian / BH Bihari / BI Bislama / BN Bengali, Bangla / BO Tibetan / BR Breton / CA Catalan /
CO Corsican / CS Czech / CY Welsh / DA Danish / DE German / DZ Bhutani / EL Greek / EN English / EO Esperanto /
ES Spanish / ET Estonian / EU Basque / FA Persian / FI Finnish / FJ Fiji / FO Faroese / FR French / FY Frisian / GA Irish /
GD Scots Gaelic / GL Galician / GN Guarani / GU Gujarati / HA Hausa / HI Hindi / HR Croatian / HU Hungarian / HY Armenian /
IA Interlingua / IE Interlingue / IK Inupiak / IN Indonesian / IS Icelandic/ IT Italian / IW Hebrew / JA Japanese / JI Yiddish /
JW Javanese / KA Georgian / KK Kazakh / KL Greenlandic / KM Cambodian / KN Kannada / KO Korean / KS Kashmiri /
KU Kurdish / KY Kirghiz / LA Latin / LN Lingala / LO Laothian / LT Lithuanian / LV Latvian, Lettish / MG Malagasy / MI Maori /
MK Macedonian / ML Malayalam / MN Mongolian / MO Moldavian / MR Marathi / MS Malay / MT Maltese / MY Burmese /
NA Nauru / NE Nepali / NL Dutch / NO Norwegian / OC Occitan / OM Afan (Oromo) / OR Oriya / PA Panjabi / PL Polish /
PS Pashto, Pushto / PT Portuguese/ QU Quechua / RM Rhaeto-Romance / RN Kirundi / RO Romanian / RU Russian /
RW Kinyarwanda / SA Sanskrit / SD Sindhi / SG Sangho / SH Serbo-Croatian / SI Singhalese / SK Slovak / SL Slovenian /
SM Samoan / SN Shona / SO Somali / SQ Albanian / SR Serbian / SS Siswat / ST Sesotho / SU Sundanese / SV Swedish /
SW Swahili / TA Tamil / TE Telugu / TG Tajik / TH Thai / TI Tigrinya / TK Turkmen / TL Tagalog / TN Setswana / TO Tonga /
TR Turkish / TS Tsonga / TT Tatar / TW Twi / UK Ukrainian / UR Urdu / UZ Uzbek / VI Vietnamese / VO Volapuk / WO Wolof /
XH Xhosa / YO Yoruba / ZH Chinese / ZU Zulu
About Output of Next Generation Audio Formats
HDMI
DIGITAL OUT
PCM
Next generation
audio formats
Maximum number of
channels
PCM
7.1ch *3
5.1ch *3
7.1ch *3
7.1ch *3
5.1ch *3/*5
7.1ch *3
7.1ch *3
5.1ch *3
Bitstream
7.1ch *4
5.1ch *4
7.1ch *4
7.1ch *4
5.1ch *4
7.1ch *4
—
Bitstream
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
—
Dolby TrueHD
7.1ch (48kHz/96kHz)
5.1ch (192kHz)
2ch *2
2ch *2
2ch *2
2ch *2
2ch *2
2ch *2
2ch *2
2ch *2
Dolby Digital PLUS
7.1ch (48kHz)
DTS-HD Master Audio
7.1ch (48kHz/96kHz)
5.1ch (192kHz)
DTS-HD High Resolution Audio
LPCM
7.1ch (48kHz/96kHz)
7.1ch (48kHz/96kHz)
5.1ch (192kHz)
—
—
1 Core only
*
*
2 Down mixed
3 When “Secondary Audio” is set to “On”, the audio is output as 48kHz.
4 When “Secondary Audio” is set to “On”, the audio is output as PCM.
5 When 5.1ch (192kHz), the audio output is downsampled to 96kHz.
5 When 2ch, the audio is output as 192kHz.
*
*
*
*
44
Appendix
Troubleshooting
The following problems do not always suggest a defect or malfunction of this Player.
Refer to the problems and lists of possible solutions below before calling for service.
Power
Problem
Possible causes and solutions
The Player power cannot be turned
on.
• Is the power cord firmly plugged into the AC outlet? (Page 19)
• When the power cord is plugged into an AC outlet, press and hold POWER on the
Player until “
” appears on the front panel display. Then, after the ON/
STANDBY indicator is lit, turn on the power. (Page 47)
• Press POWER after the ON/STANDBY indicator turns on. (Page 20)
The Player power is turned off.
• Is “Auto Power Off” set to “Yes”? When “Auto Power Off” is set to “Yes”, the
power will be automatically turned off after 10 continuous minutes of inactivity (no
playback). (Page 37)
Basic Operation
Problem
Possible causes and solutions
The remote control does not work.
• Use the remote control within its operating range. (Page 19)
• Replace the batteries. (Page 19)
• Reset the remote control.
− Press and hold 1 (the number button) first and then ENTER on the remote control
together for more than 5 seconds.
Cannot operate the Player.
• Are you operating the Player within the specified operating temperature range?
(Page 50)
Disc Playback
Problem
Possible causes and solutions
The Player cannot play a disc.
• Take out the disc and clean it. (Page 9)
• Make sure that the disc is loaded properly (aligned in disc tray and label-side up).
(Page 23)
• Make sure that region code on the disc matches that of this Player. (Page 6)
• Allow any condensation in or near the Player to dry. (Page 9)
• Check that the disc is recorded in the compatible TV system (PAL or NTSC).
• The Player cannot play back video which was not recorded normally. (Page 6)
• Proper playback may be impossible due to the state of the disc recording, a
scratched, warped or dirty disc, the state of the pick-up, or compatibility issues
between this Player and the disc being used. (Pages 6, 9)
• When the recorded time of a disc is unusually short, playback may not be possible.
• BD-RE/R discs recorded in a format other than BDMV/BDAV cannot be played
back. (Page 6)
The disc is automatically ejected
after closing the disc tray.
• Make sure that the disc is loaded properly (aligned in disc tray and label-side up).
(Page 23)
• Take out the disc and clean it. (Page 9)
• Make sure that region code on the disc matches that of this Player. (Page 6)
• Make sure that the disc is playable. (Page 6)
Video stops.
• Has the Player been subjected to shock or impact? Are you using it in an unstable
location? The Player will stop if it senses shock or vibration.
The Player makes a snapping sound • The player may sometimes make a snapping sound when starting playback if it has
when starting playback or loading
a disc.
not been operated in a while. These sounds are not malfunctions of the player but
are normal operating conditions.
(Continued on the next page)
45
Troubleshooting
Picture
Problem
Possible causes and solutions
No picture.
• Make sure that the cables are connected correctly. (Pages 14–16)
• Make sure that the connected TV or the AV receiver is set to the correct input.
(Pages 14–16)
• Take out the disc and clean it. (Page 9)
• Make sure that region code on the disc matches that of this Player. (Page 6)
• There is no picture from the HDMI output.
− Are the settings performed correctly? Please check the settings. (Page 36)
• There is no picture from the component video output.
− Are the settings performed correctly? Please check the settings. (Page 36)
Screen freezes and operation
buttons do not work.
• Press H STOP, then restart playback.
• Turn off the power and turn on the power again.
• If the power is not turned off, perform a reset. (Page 47)
• Is the disc damaged or dirty? Check the condition of the disc. (Page 9)
There is just audio with no video.
• Is the connection cable for video output connected properly? (Pages 14–16)
Widescreen video appears vertically
stretched, or black bands appear at
the top and bottom of the screen.
• Is “TV Aspect Ratio” set to match the connected TV? (Page 36)
• If you are using a widescreen TV, is the “TV Aspect Ratio” set to “Wide”? (Page 36)
Square noise (mosaic) appears on
the screen.
• Blocks in images may be visible in scenes with rapid movement due to the
characteristics of digital image compression technology.
The playback screen will be
disturbed if DVD video is recorded
to a VCR, or played back through a
VCR.
• This Player complies with analog copy protection. Some discs contain a copy
prohibiting signal. If you try to play back such discs through a VCR, or record to a
VCR and play back the signal, the copy protection will prevent normal playback.
(Pages 15–16)
Audio is not output, or images are
not played back properly.
• The audio may not be output or the images may not be played back properly for
some discs in which copyright-protected contents are recorded.
Sound
Problem
Possible causes and solutions
No sound, or sound is distorted.
• If the volume of the TV or amplifier is set to minimum, turn the volume up.
• There is no sound during still mode, slow motion playback, fast forward and fast
reverse. (Page 29)
• DVD audio recorded in DTS is only output from the DIGITAL AUDIO OUT terminal.
Connect a DTS compatible digital amplifier or decoder to the DIGITAL AUDIO OUT
OPTICAL terminal on this Player. (Page 17)
• Check that the audio cable is connected correctly. (Page 17)
• Check that the cable plugs are clean.
• Take out the disc and clean it. (Page 9)
• Audio may not be output depending on the audio recording status, such as when
audio other than an audio signal or non-standard audio is recorded for the audio
content of the disc. (Page 6)
Left and right channels of audio are
reversed, or sound comes out of
only one side.
• Are left and right audio cables connected to the opposite terminal, or is one side
disconnected? (Page 17)
Audio is not output, or images are
not played back properly.
• The audio may not be output or the images may not be played back properly for
some discs in which copyright-protected contents are recorded.
Network
Problem
Possible causes and solutions
Cannot connect to the Internet.
• Is the LAN cable connected properly?
• Is the wrong cable such as a modular cable used? Connect a LAN cable to the
ETHERNET terminal. (Page 18)
• Is the power for the connected equipment, such as broadband router or modem
turned on?
• Is the broadband router and/or modem properly connected?
• Is the proper value(s) set in the network setting? Check “Communication Setup”.
(Pages 39–41)
46
Troubleshooting
Network (Continued)
Problem
Possible causes and solutions
Cannot download BD-LIVE contents. • Is the LAN cable connected properly?
• Is the USB memory device properly connected? Check that the USB memory
device is connected to the BD STORAGE/SERVICE terminal of this Player.
• Check if the BD disc supports BD-LIVE.
• Check the setting for “BD Internet Access”. (Page 38)
Other
Problem
Possible causes and solutions
The TV operates incorrectly.
• Some TVs with wireless remote control capability may operate incorrectly when
using the remote control of this Player. Use such TVs away from this Player.
The Player heats up during use.
• When using this Player, the console cabinet may heat up depending on the usage
environment. This is not a malfunction.
ON/STANDBY indicator will remain
lit.
• When the AC cord is removed from the outlet, the ON/STANDBY indicator will
remain lit for a short period. This is normal and is not a malfunction.
To Reset this Player
• If this Player receives strong interference from a source such as excessive static electricity, strong external noise, malfunction
of power supply, or voltage caused by lightning during use or a wrong operation is sent to the Player, errors like the Player not
accepting an operation may occur. Press and hold POWER on the Player until “
” appears on the front panel display
when the Player does not operate properly even after the power has been turned off. Then, after the ON/STANDBY indicator
is lit, turn on the power.
• When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it may take
a few moments for the system processing to finish before the Player is ready for use. During the system processing, the
BD/DVD/CD mode indicator on the front panel display of the Player will blink. Once the system processing has finished, the
indicator will finish blinking and then light up normally. You can operate the Player when the BD/DVD/CD mode indicator is lit.
• Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must
be set again.
• When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the
problem, contact the nearest service center approved by SHARP.
On-screen Error Messages
Messages Relating to BD disc and DVD disc
• The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the
operation is not correct.
Error message
Cannot play.
Possible Error
Suggested Solution
• The disc cannot be played back with
this Player.
• Check the disc, and load it correctly.
Incompatible disc.
• If you load a disc which cannot be
played with this Player (i.e. a scratched
disc), or if you load a disc upside down,
this message will appear, and the disc
tray will automatically pop out.
• Occurs if the loaded disc cannot be
played because it is a non-standard disc
or scratched, etc.
• Remove the disc.
Cannot operate.
• Occurs if an operation is incorrect.
• Occurs if there is a formatting error.
This USB memory is not formatted
properly. Please format the memory in
USB memory management.
• Format the USB memory again.
The Connected USB Memory cannot
be used. It should be compliant with
USB 2.0
• Occurs if USB memory not compliant
with USB 2.0 High Speed (480Mbit/s) is
used (i.e. USB 1.0/USB 1.1).
• Connect USB 2.0 High Speed
(480Mbit/s) compliant USB memory.
47
Glossary
BDAV (Page 6)
Dolby TrueHD
BDAV (Blu-ray Disc Audio/Visual, BD-AV) refers to one of the
application formats used for writable Blu-ray discs such as
BD-R, BD-RE, etc. BDAV is a recording format equivalent to
DVD-VR (VR mode) of the DVD specifications.
Dolby TrueHD is a lossless coding technology that supports
up to 8 channels of multi-channel surround sound for the next
generation optical discs. The reproduced sound is true to the
original source bit-for-bit.
BD-J application
DTS
The BD-ROM format supports Java for interactive functions.
“BD-J” offers content providers almost unlimited functionality
when creating interactive BD-ROM titles.
This is a digital sound system developed by DTS, Inc. for use
in cinemas.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a new technology
developed for the next generation high definition optical disc
format.
BD-LIVE (page 25)
A variety of interactive content is available from BD-LIVE
compatible Blu-ray discs via the internet.
BDMV (page 6)
DTS-HD Master Audio
BDMV (Blu-ray Disc Movie, BD-MV) refers to one of the
application formats used for BD-ROM which is one of the
Blu-ray Disc specifications. BDMV is a recording format
equivalent to DVD-video of the DVD specification.
DTS-HD Master Audio is a lossless audio compression
technology developed for the next generation high definition
optical disc format.
DTS-HD Master Audio | Essential
DTS-HD Master Audio | Essential is a lossless audio
compression technology developed for the next generation
high definition optical disc format.
BD-R (pages 6, 23)
A BD-R (Blu-ray Disc Recordable) is a recordable, write-once
Blu-ray Disc. Since contents can be recorded and cannot be
overwritten, a BD-R can be used to archive data or for storing
and distributing video material.
DVD upscaling (page 23)
Upscaling (upconverting) refers to a function of various
players and devices that enlarge the image size to fit the size
of the screen of video equipments such as a TV.
BD-RE (pages 6, 23)
A BD-RE (Blu-ray Disc Rewritable) is a recordable and
rewritable Blu-ray Disc.
DVD video (pages 6, 23)
BD-ROM
A disc format that contains up to eight hours of moving
pictures on a disc the same diameter as a CD. A single-layer
single sided DVD holds up to 4.7 GB; a double layer single-
sided DVD, 8.5 GB; a single layer double-sided DVD, 9.4
GB; double-layer double-sided DVD, 17 GB. The MPEG 2
format was adopted for efficient video data compression. It is
a variable rate technology that encodes the data to according
to the status of the video for reproducing high-quality images.
Audio information is recorded in a multi-channel format such
as Dolby Digital, allowing for a realistic audio presence.
BD-ROMs (Blu-ray Disc Read-Only Memory) are commercially
produced discs. Other than conventional movie and video
contents, these discs have enhanced features such as
interactive content, menu operations using pop-up menus,
selection of subtitle display, and slide shows. Although a
BD-ROM may contain any form of data, most BD-ROM discs
will contain movies in High Definition format for playback on
Blu-ray Disc players.
Blu-ray Disc (BD) (page 6)
A disc format developed for recording/playing high-definition
(HD) video (for HDTV, etc.), and for storing large amounts of
data. A single layer Blu-ray Disc holds up to 25 GB, and a
dual-layer Blu-ray Disc holds up to 50 GB of data.
DVD+/-R (pages 6, 23)
A DVD+/-R is a recordable, write-once DVD. Since contents
can be recorded and cannot be overwritten, a DVD+/-R can
be used to archive data or for storing and distributing video
material. The DVD+/-R has two different formats: VR format
and Video format. DVDs created in Video format have the
same format as a DVD video, while discs created in VR (Video
Recording) format allow the contents to be programed or
edited.
Chapter number (pages 33, 34)
Sections of a movie or a music feature that are smaller than
titles. A title is composed of several chapters. Some discs
may only be comprised of a single chapter.
Copy guard
DVD+/-RW (pages 6, 23)
This function prevents copying. You cannot copy discs
marked by the copyright holder with a signal which prevents
copying.
A DVD+/-RW is a recordable and rewritable DVD. The re-
recordable feature makes editing possible. The DVD+/-RW
has two different formats: VR format and Video format. DVDs
created in Video format have the same format as a DVD
video, while discs created in VR (Video Recording) format
allow the contents to be programed or edited.
Disc menu (page 24)
This lets you select things like the subtitle language or audio
format using a menu stored on the DVD video disc.
HDMI (page 14)
Dolby Digital
HDMI (High-Definition Multimedia Interface) is an interface
that supports both video and audio on a single digital
connection. The HDMI connection carries standard to high
definition video signals and multi-channel audio signals to
AV components such as HDMI equipped TVs, in digital form
without degradation.
A sound system developed by Dolby Laboratories Inc. that
gives movie theater ambience to audio output when the
product is connected to a Dolby Digital processor or amplifier.
Dolby Digital Plus
A sound system developed as an extension to Dolby Digital.
This audio coding technology supports 7.1 multi-channel
surround sound.
48
Glossary
Interlace format
Region code (page 6)
Code identifying a geographic region of compatibility for a
BD/DVD.
Interlace format shows every other line of an image as a
single “field” and is the standard method for displaying
images on television. The even numbered field shows the
even numbered lines of an image, and the odd numbered
field shows the odd numbered lines of an image.
Resume playback (pages 23, 28)
If you stop playback while it is in progress, the Player stores
the stop position in memory, and this function lets you
playback from that point.
JPEG (pages 6, 7, 32)
JPEG (Joint Photographic Experts Group) is a still image data
compression format and is used in most of digital cameras.
Skip (page 29)
This returns to the start of the chapter (or track) being played,
or skips to the next chapter (or track).
Letter Box (LB 4:3) (page 36)
A screen size with black bars on the top and bottom of the
image to allow viewing of wide-screen (16:9) material on a
connected 4:3 TV.
Subtitles (pages 30, 33, 34)
These are the lines of text appearing at the bottom of the
screen which translate or transcribe the dialog. They are
recorded on many DVD and BD video discs.
Linear PCM Sound
Linear PCM is a signal recording format used for Audio CDs
and on some DVD and Blu-ray discs. The sound on Audio
CDs is recorded at 44.1 kHz with 16 bits. (Sound is recorded
between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD
video discs and between 48 kHz with 16 bits and 192 kHz
with 24 bits on BD video discs.)
Time number
This indicates the play time which has elapsed from the start
of a disc or a title. It can be used to find a specific scene
quickly. (It may not work with some discs.)
Title number (pages 33, 34)
These numbers are recorded on DVD and Blu-ray discs.
When a disc contains two or more movies, these movies are
numbered as title 1, title 2, etc.
MPEG-2
MPEG-2 (Moving Picture Experts Group phase 2) is one of
the video data compression schemes, which is adopted for
DVD videos and digital broadcasts worldwide. Some Blu-ray
Discs also use high bitrate MPEG-2.
Top menu (page 24)
In a BD/DVD video, this is the menu for selecting things like
the chapter to be played back and the subtitle language. In
some DVD videos, the top menu may be called the “Title
Menu”.
Multi Angle (pages 31, 33, 34)
This is a feature of DVD and BD video discs. In some discs,
the same scene is shot from different angles, and these are
stored in a single disc so you can enjoy playback from each
angle. (This function can be enjoyed if the disc is recorded
with multiple angles.)
Track number (pages 33, 34)
These numbers are assigned to the tracks which are
recorded on audio CDs. They enable specific tracks to be
located quickly.
Multi Audio
This is a feature of DVD and BD video discs. This function
makes it possible to record different audio tracks for the same
video, so you can enhance your enjoyment by switching the
audio. (You can enjoy this function with discs recorded with
multiple audio tracks.)
x.v.Color
x.v.Color reproduces a greater range of color than before,
showing almost all of the colors that the human eye can
detect. (Applicable for JPEG files only with this system)
Pan Scan (PS 4:3) (page 36)
A screen size that cuts off the sides of the image to allow
viewing of wide-screen (16:9) material on a connected 4:3 TV.
Parental control (page 38)
In some digital broadcasts and BD/DVD video discs, a
control level for disc viewing is set depending on the age of
the viewer. With this Player, you can set the control level for
viewing such broadcasts and discs.
Pop-up menu (page 24)
An enhanced menu operation available on BD video discs.
The pop-up menu appears when POP-UP MENU is pressed
during playback, and can be operated while playback is in
progress.
Progressive format
Compared to the Interlace format that alternately shows
every other line of an image (field) to create one frame, the
Progressive format shows the entire image at once as a single
frame. This means that while the Interlace format can show
30 frames/60 fields in one second, the Progressive format
can show 60 frames in one second. The overall picture quality
increases and still images, text, and horizontal lines appear
sharper.
49
Specifications
General
Power supply
AC 120V, 60Hz
Power consumption (Normal)
Power consumption (Standby)
Dimensions
22 W
0.5 W (When “Quick Start” is set to “No”)
Approx. 17 1/64 g 2 9/32 g 10 1/4 inch (W g H g D)
Approx. 432 mm g 58 mm g 260 mm (W g H g D)
Weight
Approx. 6.6 lbs. (3.0 kg)
41°F to 95°F (5°C to 35°C)
–4°F to 131°F (–20°C to 55°C)
10 % to 80 % (no condensation)
NTSC system
Operating temperature
Storage temperature
Operating humidity
TV systems
Playback
Playable discs
BD-ROM, BD-RE Dual Layer, BD-R Dual Layer,
DVD Video, DVD+RW/+R/-RW/-R Dual Layer (Video/VR format),
Audio CD (CD-DA), CD-RW/R (CD-DA, JPEG file format)
Input/Output
HDMI
HDMI 19-pin standard connector (1080p 24Hz output)
HDMI™ (V.1.3 with x.v.Color, Dolby TrueHD, DTS-HD Master Audio | Essential)
Component video output
Output level:
Y: 1 Vp-p (75 ohms)
PB/CB, PR/CR: 0.7 Vp-p (75 ohms)
Jacks: RCA jack
Video output
Output level: 1 Vp-p (75 ohms)
Jack: RCA-pin jack
Digital audio optical output
Audio output
Terminal: Square Optical terminal
Output level: 2 V rms (Output impedance: 1k ohms)
Jacks: RCA jack
USB input
USB 2.0 High Speed (480Mbit/s) correspondence (for Local storage/Software
update)
ETHERNET
10BASE-T/100BASE-TX
Specifications are subject to change without notice.
50
CONSUMER LIMITED WARRANTY
(Valid for warranty service in the U.S. and PUERTO RICO only)
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that
it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to
the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation
or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commer-
cial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by
consumers in their home or residence.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and
provide proof of purchase to the servicer.
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warran-
ties, express or implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE
EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLI-
CABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF
SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclu-
sive remedy available to the purchaser and only for the time periods set forth herein. No other representations or prom-
ises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein,
shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or other-
wise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject
to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, altera-
tion, modification, tampering, improper operation or maintenance or any damages or defects in the Product which were
caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be
liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not
allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not
apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA. AND
PUERTO RICO
Model Specific Section
Your Product Model Number & Description:
BD-HP22U BLU-RAY DISC PLAYER
(Be sure to have this information available when you need
service for your Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United
States. To find the location of the nearest Sharp Authorized
Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Please transport the Product in its original packaging and
ensure that the Product is covered to avoid scratches and
damage. Sharp shall not be responsible for lost, stolen or
misdirected mail or for damage to the product incurred
during shipping.
51
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Malaysia
Impreso en Malasia
TINS-E158WJQZ
09P02-MA-NG
|