BD-HP50U
BLU-RAY DISC PLAYER
LECTEUR DE DISQUE BLU-RAY
REPRODUCTOR DE DISCOS BLU-RAY
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
Introduction
OPERATION MANUAL
ENGLISH
1
Contents
Playback Functions......................... 28 – 30
Fast Forward/Reverse (Search).............................. 28
Skipping to the Next or the Start of the Current
Chapter (Track).................................................... 28
Pause/Frame Advance Playback ........................... 28
Slow Playback....................................................... 28
Skip Search........................................................... 28
Replay................................................................... 28
Repeat Playback of a Title or Chapter (Repeat
Playback)............................................................. 28
Partial Repeat Playback (Repeat Playback of a
Specified Part)..................................................... 29
Switching Audio .................................................... 29
Switching Subtitles................................................ 29
Switching the Angle............................................... 30
Displaying the Angle Mark ..................................... 30
n Introduction
Contents.....................................................2
What would you like to do with this
Player?......................................................3
DEAR SHARP CUSTOMER .......................4
IMPORTANT SAFETY INSTRUCTIONS... 4 – 6
About Discs.......................................... 7 – 8
About Disc Contents.................................9
Important Information.............................10
Getting Started ........................................11
Major Components.......................... 12 – 13
o Connection
Introduction to Connections ..................14
Video Connections .......................... 15 – 17
Connecting to the HDMI Terminal .......................... 15
Switching the video output between HDMI and
Component video................................................ 15
Connecting to the Component Jacks .................... 16
Connecting to the S-video or Video Jack............... 17
JPEG File Playback .................................31
Settings During Playback ............... 32 – 33
Function Control.................................................... 32
q Settings
SETTINGS......................................... 34 – 40
Common operations.............................................. 34
Basic Operation for PLAYBACK SETTING ............. 34
AUDIO VIDEO SETTINGS...................................... 35
QUICK START....................................................... 36
AUTO POWER OFF............................................... 36
AQUOS LINK......................................................... 36
PLAYBACK SETTING ............................................ 36
FRONT DISPLAY/LED ........................................... 37
VERSION............................................................... 37
SYSTEM RESET.................................................... 37
USB MEMORY MANAGEMENT ............................ 38
SOFTWARE UPDATE .................................... 39 – 40
Audio Connections.......................... 18 – 19
Connecting to the Digital Audio Terminal or Jack ... 18
Connecting the Audio Jacks.................................. 19
p Disc Playback
Before Starting Playback................ 20 – 23
Loading the Batteries in the Remote Control.......... 20
Connecting the Power Cord .................................. 20
Setting the Remote Control Code.......................... 21
Operating a SHARP TV Using the Remote Control... 21
Turning the Power On............................................ 22
Language Setting .................................................. 22
Turning Off the LCD Backlight and Indications ....... 23
Using AQUOS LINK............................................... 23
BD/DVD/CD Playback..................... 24 – 27
Opening the front panel door................................. 24
Loading a Disc ...................................................... 24
BD/DVD Video Playback........................................ 24
BD/DVD Menus..................................................... 24
Use of Picture in Picture function (secondary video
playback)............................................................. 25
Virtual Package ..................................................... 25
DVD-R/-RW Playback ........................................... 26
Audio CD Playback ............................................... 27
r Appendix
RS-232C port specifications...................41
Troubleshooting............................... 42 – 43
On-screen Error Messages ....................43
Glossary ........................................... 44 – 45
Specifications ..........................................46
LIMITED WARRANTY...................... 47 – 48
*
The illustrations and on-screen displays in this operation manual
are for explanation purposes and may vary slightly from the actual
operations.
2
What would you like to do with this Player?
Watching high quality movies on Blu-
ray discs
This Player offers full high-definition Blu-ray disc
playback.
What to do first:
Refer to “Getting Started” (p. 11) to
prepare for watching your discs.
BD/DVD/CD Playback (p. 24)
n Introduction (pp. 1–13)
Explains the important operation information.
Enjoying different kinds of discs and
contents
Use this Player to enjoy various types of optical
discs such as DVDs and CDs that contain various
multimedia content.
About Discs (pp. 7–8)
BD/DVD/CD Playback (p. 24)
o Connection (pp. 14–19)
Shows the connecting options provided by this
Player.
Simple connection and operation
through HDMI
This Player is equipped with an HDMI terminal. You
can connect it to the TV using HDMI and no other
cable will be needed to enjoy movies. If your TV
is compatible with AQUOS LINK, you can control
both the TV and this Player with simple operations.
p Disc Playback (pp. 20–33)
Shows simple playback and useful functions.
Introduction to Connections (p. 14)
Video Connections (p. 15)
q Settings (pp. 34–40)
Gives you more options to suit your
circumstances.
r Appendix (pp. 41–48)
Provides troubleshooting tips and more
information.
3
DEAR SHARP CUSTOMER
Thank you for your purchase of the SHARP Blu-ray Disc Player. To ensure safety
and many years of trouble-free operation of your product, please read the Important
Safety Instructions carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your
Blu-ray Disc Player, please read the following precautions carefully before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
For products intended to operate from battery power, or other sources, refer to the operating instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a
risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to
the method recommended by the manufacturer.
22) The main AC plug is used as disconnect device and shall always remain readily operable.
4
IMPORTANT SAFETY INSTRUCTIONS
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the
product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only
the mounting hardware recommended by the manufacturer.
• Selecting the location — Select a place with no direct sunlight and good ventilation.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life
of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block
ventilation openings. This product is not designed for built-in installation; do not place the product in an
enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's
instructions are followed.
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
• Lightning — For added protection for this product during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the
equipment due to lightning and power-line surges.
• To prevent fire, never place any type of candle or flames on the top or near the product.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
5
IMPORTANT SAFETY INSTRUCTIONS
• To prevent fire or shock hazard, do not place the AC cord under the product or other heavy
items.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• To clean the outer cabinet, periodically wipe it with a soft cloth.
• Do not use chemicals for cleaning. It may damage the cabinet finish.
• Do not place objects in front of the product.
6
About Discs
• BD/DVD video players and discs have region codes, which dictate
the regions in which a disc can be played. This Player's region
code is A for BD and 1 for DVD. (Discs marked ALL will play in
any player.)
• BD/DVD Video operations and functions may be different from
the explanations in this manual and some operations may be
prohibited due to disc manufacturer's settings.
• If a menu screen or operating instructions are displayed during
playback of a disc, follow the operating procedure displayed.
• The audio component of a DVD video recorded at 96 kHz (Linear
PCM) will be output as 48 kHz audio during playback.
Blu-ray Disc
Blu-ray Disc is the ultimate next generation optical media
format, offering the following key features:
• Largest capacity (25 GB single layer – 50 GB dual layer)
– with over 5 times the amount of content possible with
current DVDs, particularly well suited for high definition
feature films with extended levels of interactive features
• Pristine picture quality with the capability for full high
definition 1920 x 1080p resolution
• Best audio possible with uncompressed surround sound
(higher quality than even theatre audio)
• Broadest industry support – ensuring more choice for
consumers in the marketplace
• Hardware products will be backward compatible with
DVDs, allowing continued enjoyment of existing DVD
libraries.
NOTE
• Playback for some of the discs in the left side column tables may
not be possible depending on the disc.
• “Finalize” refers to a recorder processing a recorded disc so that it
will play in other DVD players/recorders as well as this player. Only
finalized DVD discs will play back in this player. (This player does
not have a function to finalize discs.)
• Disc Durability – new breakthroughs in hard coating
technologies gives Blu-ray Discs the strongest resistance
to scratches and finger prints.
Discs that Cannot Be Used with This
Player
Types of Discs that Can Be Used
with This Player
• The following discs can be played back in this Player. Do not use
an 8 cm (3”) to 12 cm (5”) adapter.
■ The following discs cannot be played back or will
not play back properly on this Player. If such a disc
is mistakenly played back, speaker damage may
occur. Never attempt to play back these discs.
• Use discs that conform to compatible standards as indicated by
the presence of official logos on the disc label. Playback of discs
not complying with these standards is not guaranteed. In addition,
the image quality or sound quality is not guaranteed even if the
discs can be played back.
CDG, Video CD, Photo CD, CD-ROM, CD-TEXT,
SVCD, SACD, PD, CDV, CVD, DVD-RAM, DVD-Audio,
BD-RE with the cartridge, CD-MP3, CD-WMA
■ Discs with unusual shapes cannot be played.
• Discs with unusual shapes (heart-shaped or hexagonal
discs, etc.) cannot be used. The use of such discs will cause
malfunction.
Recording
Format
Disc Type
Contents
Disc Size
BD video
Region
code
—
Audio + Video 12 cm (5”)
(Movie)
■ The following BD video discs cannot be played.
• Discs not displaying “A” or “ALL” for the region code (discs
sold outside the authorized marketing area).*
• Discs produced illegally.
A/ALL
• Discs recorded for commercial use.
*
The region code for this product is A.
BD-RE DL
BD-R DL
BDMV
format only
■ The following DVD video discs cannot be played.
• Discs not displaying “1” or “ALL” for the region code (discs sold
outside the authorized marketing area).*
• Discs produced illegally.
• Discs recorded for commercial use.
DVD Video
Region
code
1/ALL
Video format Audio + Video 12 cm (5”)
(Movie) 8 cm (3”)
ALL
1
*
The region code for this product is 1.
■ The following BD-RE/R, DVD-RW/R and DVD+RW/R
discs cannot be played.
• Discs on which data has not been recorded cannot be played
back.
DVD+RW/DVD+R
DVD-R DL
DVD-RW/DVD-R
Video/VR
format
(finalized disc
only)
Audio + Video 12 cm (5”)
(Movie)
8 cm (3”)
Audio CD*1
Audio CD
(CD-DA)
Audio
Audio
■ The following Audio CD discs cannot be played.
• Discs containing a signal for the purpose of protecting
copyrights (copy control signal) may not be played back with
this Player.
• This Player has been designed on the premise of playing back
Audio CDs that comply with CD (Compact Disc) standards.
CD-RW/CD-R
Audio CD
(CD-DA)
12 cm (5”)
8 cm (3”)
JPEG*2
Still image
(JPEG file)
■ The following CD-RW/R discs cannot be played.
• Discs on which data has not been recorded cannot be played
back.
1
This Player has been designed on the premise of playing back
Audio CDs that comply with CD (Compact Disc) standards. CDs
containing a signal for the purpose of protecting copyrights (copy
control signal) may not be able to be played back with this Player.
*
• Discs recorded in a format other than an Audio CD and JPEG
file format*2 cannot be played back.
• Discs may not be played back depending on their recording
status or the status of the disc itself.
• Discs may not be played back depending on their compatibility
with this Player.
7
About Discs
*2 About the JPEG file format
JPEG is a type of file format for storing still-image files
(photos, illustrations, etc.). The Player lets you play JPEG
format still-image files.
■ Structure of still images (JPEG) folders
You can play still images (JPEG) with this unit by making folder
on disc as shown below.
Root
■ File formats that are not compatible.
• Still images in formats other than JPEG (such as TIFF) cannot
be played.
• There may be some files that cannot be played even if they are
in JPEG format.
01 Folder
001.jpg
002.jpg
003.jpg
• Progressive JPEG files cannot be played.
• Moving image files and audio files as well as Motion JPEG
format files cannot be played, even though they are JPEG files.
■ Other files that cannot be played back.
• You may not be able to play some still images which you have
created, touched up, copied or otherwise edited on your
computer.
02 Folder
004.jpg
005.jpg
006.jpg
007.jpg
■ You may experience one or more of the following
symptoms when playing files.
• It may take some time to play files depending on the number of
folders, number of files and volume of data involved.
• EXIF information will not be displayed. EXIF stands for
Exchangeable Image File Format, and is a standard for
storing interchange information in image files, especially those
information.)
64 Folder
■ When using the unit to play a CD-RW/R disc with still
images stored (recorded).
• With CD-RW/R discs on which still images are mixed in with
music or movies, you will be able to play only the still images.
You may not be able to play some of these discs at all.
• Multi-session discs cannot be played.
• You may not be able to play some still images you have
processed (rotated or saved by overwriting other images) using
image processing software or some still images you have
imported from the Internet or e-mail.
254.jpg
255.jpg
256.jpg
• The discs which this Player can play back (recognize) are
limited to the following properties:
Contains EXIF format files
Picture resolution: Between 32g32 and 7680g4320 pixels
Maximum number of folders: 64
Maximum number of files: 256
File size: 20MB or less
8
About Disc Contents
Linear PCM
BD Video
Linear PCM is a signal recording format used for Audio
CDs and on some DVD and Blu-ray discs. The sound on
Audio CDs is recorded at 44.1 kHz with 16 bits. (Sound is
recorded between 48 kHz with 16 bits and 96 kHz with 24
bits on DVD video discs and between 48 kHz with 16 bits
and 192 kHz with 24 bits on BD video discs.)
• Enjoy Final Standard Profile functions (Page 25), such as picture-
in-picture.
The available functions differ depending on the disc.
This is a new function of BD-Video that plays the primary video
and secondary video simultaneously.
For instance, the function is capable of playing the original movie
as the primary video while playing video commentary from the film
director on a small screen as a secondary video.
2
3
4
Subtitle languages
This indicates the kind of subtitles.
Screen aspect ratio
Movies are shot in a variety of screen modes.
Title, Chapter and Track
• Blu-ray discs and DVDs are divided into “Titles” and “Chapters”.
If the disc has more than one movie on it, each movie would be a
separate “Title”. “Chapters”, on the other hand, are subdivisions of
titles. (See Example 1.)
Camera angle
Recorded onto some BD/DVD discs are scenes which
have been simultaneously shot from a number of different
angles (the same scene is shot from the front, from the left
side, from the right side, etc.).
• Audio CDs are divided into “Tracks”. You can think of a “Track” as
one tune on an Audio CD. (See Example 2.)
5
Region code
This indicates the region code (playable region code).
Example 1: Blu-ray disc or DVD
The Icons Used in This Operation
Manual
Title 1
Title 2
Chapter 1
Chapter 2
Chapter 3
Chapter 1
Chapter 2
BD VIDEO
BD-RE
BD-R
........ Indicates the functions that can be performed
for BD Video discs.
........ Indicates the functions that can be performed
for BD-RE discs.
........ Indicates the functions that can be performed
for BD-R discs.
.... Indicates the functions that can be performed
for DVD Video discs.
Example 2: Audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
DVD VIDEO
DVD-RW
DVD-R
...... Indicates the functions that can be performed
for DVD-RW discs.
....... Indicates the functions that can be performed
for DVD-R discs.
........ Indicates the functions that can be performed
for Audio CDs.
..... Indicates the functions that can be performed
for CD-R discs in JPEG format.
Icons Used on DVD Video Disc Cases
The back of the case of a DVD that is commercially available
usually contains various information about the contents of the
disc.
AUDIO CD
CD-R
JPEG
1
3
2
CD-RW
...... Indicates the functions that can be performed
for CD-RW discs in JPEG format.
JPEG
1. English
2. Chinese
1. English
2. Chinese
2
2
4
5
1 23
4 56
16:9 LB
2
1
Audio tracks and audio formats
DVD discs can contain up to 8 separate tracks with
a different language on each. The first in the list is the
original track.
This section also details the audio format of each
soundtrack — Dolby Digital, DTS, MPEG etc.
Dolby Digital
A sound system developed by Dolby Laboratories Inc.
that gives movie theater ambience to audio output when
the Player is connected to a Dolby Digital processor or
amplifier.
DTS
DTS is a digital sound system developed by DTS, Inc. for
use in cinemas. This system uses 6 audio channels and
provides accurate sound field positioning and realistic
acoustics. (By connecting a DTS Digital Surround decoder,
you can also listen to DTS Digital Surround sound.)
9
Important Information
Disc Precautions
Copyright
• Audio-visual material may consist of copyrighted works which
must not be recorded without the authority of the owner of the
copyright. Refer to relevant laws in your country.
• This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Be Careful of Scratches and Dust
• BD, DVD and CD discs are sensitive to dust, fingerprints and
especially scratches. A scratched disc may not be able to be
played back. Handle discs with care and store them in a safe
place.
Proper Disc Storage
Place the disc in the center of the
disc case and store the case and
disc upright.
U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698;
6,516,132; and 5,583,936
• Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
• Manufactured under license under U.S. Patent #: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS is a registered
trademark and the DTS logos, Symbol, DTS-HD and DTS-HD
Advanced Digital Out are trademarks of DTS, Inc. ©1996-2007
DTS, Inc. All Rights Reserved.
Avoid storing discs in locations
subject to direct sunlight, close to
heating appliances or in locations
of high humidity.
Do not drop discs or subject
them to strong vibrations or
impacts.
•
•
is a trademark.
Avoid storing discs in locations
where there are large amounts of
dust or moisture.
is a trademark of DVD Format/Logo Licensing Corporation.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
• “x.v.Color” and “x.v.Color” logo are trademarks.
• Java and all Java-based trademarks and logos are trademarks
or registered trademarks of Sun Microsystems, Inc. in the United
States and/or other countries.
Handling Precautions
• If the surface is soiled, wipe gently with a soft, damp (water only)
cloth. When wiping discs, always move the cloth from the center
hole toward the outer edge.
• Do not use record cleaning sprays, benzene, thinner, static
electricity prevention liquids or any other solvent.
• Do not touch the surface.
• Do not stick paper or adhesive labels to the disc.
• If the playing surface of a disc is soiled or scratched, the Player
may decide that the disc is incompatible and eject the disc tray,
or it may fail to play the disc correctly. Wipe any dirt off the playing
surface with a soft cloth.
Cleaning the Pick Up Lens
• Never use commercially available cleaning discs. The use of these
discs can damage the lens.
• Request the nearest service center approved by SHARP to clean
the lens.
Warnings about dew formation
• Condensation may form on pick up lens or disc in the following
conditions:
− Immediately after a heater has been turned on.
− In a steamy or very humid room.
− When the Player is suddenly moved from a cold environment to
a warm one.
When condensation forms:
It becomes difficult for the Player to read the signals on the disc
and prevents the Player from operating properly.
To remove condensation:
Take out the disc and leave the Player with the power off until
the condensation disappears. Using the Player when there is
condensation may cause malfunction.
10
Getting Started
Step 1: Unpacking
Make sure the following accessories are provided with the product.
Remote control unit
AC cord
“AAA” size battery (g2)
AV cable
Step 2: Selecting equipment to connect
Connection varies with the equipment used. Refer to Connection. (Pages 14–19)
Turn off the devices before connecting.
Step 3: Playing back discs
Play back a Blu-ray disc after connecting the Player to your favorite equipment.
Refer to Disc Playback. (Pages 20–33)
Step 4: Adjust settings
Adjust settings to enjoy various features and other functions for playing discs.
Refer to Settings. (Pages 34–40)
11
Major Components
Main Unit (Front)
1
2
3
4
1
2
3
4
5
6
7
8
9
POWER (p. 22)
Front panel display (p. 22)
Disc tray (p. 24)
OPEN/CLOSE (p. 24)
Remote control sensor (p. 20)
Front panel door (p. 24)
DOOR (open/close) (p. 24)
ON indicator (p. 22)
5
6
7
QUICK indicator (p. 22)
10 STANDBY indicator (p. 22)
11 DVD/CD mode indicator (p. 22)
12 BD mode indicator (p. 22)
13 d PLAY (p. 24)
8 9 10
11
12
14 H STOP (p. 24)
15 T SKIP (p. 26)
16 U SKIP (p. 26)
13141516
Main Unit (Rear)
4
6
12 13
1
2
3
5
7
8
9
10 11
1
2
3
4
5
6
7
8
9
RS-232C terminal (p. 41)
Using an external IR receiver with this
Player
IR IN jack (See the left side column.)
IR SW (See the left side column.)
COMPONENT VIDEO OUT jacks (p. 16)
S-VIDEO output jack (p. 17)
If you prefer to keep your AV equipment in a closed cabinet,
you can use an external IR receiver connected to the IR IN
jack. You can thus have just the receiver outside of the cabinet
and still be able to control the Player.
VIDEO output jack (p. 17)
2CH AUDIO output jacks (p. 19)
HDMI OUT terminal (p. 15)
BD STORAGE/SERVICE terminal
BD STORAGE (pp. 25, 38)
SERVICE for software (p. 39, 40)
IR receiver
NOTE
10 DIGITAL AUDIO OUT COAXIAL jack (p. 18)
• You may need set the IR SW (located near the IR IN jack) for this
Player to recognize the IR receiver correctly.
• This Player does not supply power to the external IR receiver.
Please see the operating instructions of the IR receiver for the
power requirements.
11 DIGITAL AUDIO OUT OPTICAL terminal (p. 18)
12 Cooling fan
The cooling fan operates while the power to the
Player is on.
13 AC IN terminal (p. 20)
12
Major Components
Remote Control Unit
1
POWER (p. 22)
2
3
4
5
6
7
8
9
m OPEN/CLOSE (p. 24)
TOP MENU, TITLE LIST (pp. 24, 26)
DISPLAY (p. 21)
Cursor buttons (a/b/c/d), ENTER (pp. 22, 34)
EXIT (pp. 22, 34)
A (Red), B (Green), C (Blue), D (Yellow) (pp. 27, 31)
AUDIO (p. 29), SUBTITLE (p. 29), ANGLE (p. 30)
PinP (p. 25)
1
2
16
17
18
3
4
0 REPEAT (pp. 28, 29), OFF (for REPEAT) (pp. 28, 29)
Q S REV (p. 28)
W T SKIP/k (pp. 26, 28)
E REPLAY (p. 28)
19
5
R
(Lock) (See below.)
6
7
8
9
10
11
12
20
T LIGHT (p. 23)
Y TV CONTROL buttons (p. 21)
U SETUP (pp. 22, 34)
I POP-UP MENU (p. 25)
O FUNCTION (p. 32)
P n RETURN (p. 28)
A PAGE r/s (p. 26)
S d PLAY (p. 24)
D V FWD (p. 28)
FF PAUSE (p. 28)
G U SKIP/l (pp. 26, 28)
H SKIP SEARCH (p. 28)
J H STOP (p. 24)
21
22
23
24
25
26
13
27
28
29
14
15
K HDMI (p. 15)
L COMPONENT RESET (p. 35)
+ Number buttons (pp. 21, 33)
Z ENTER (p. 33)
This button is the same operation as 5 ENTER.
X CLEAR (p. 33)
To clear the input number.
Buttons under the cover
C Non-functional buttons
They have no operation at all.
31
32
These buttons on the remote control are non-functional.
Keylock function
You can set the keylock to prevent accidental operations.
This function allows TVs compatible with AQUOS LINK to
also perform a Key Lock on the player.
30
33
Press and hold
(Lock) for more than 5 seconds.
• Each time you perform this operation, the function is activated
or deactivated.
• If you try to operate the Player while the keylock function is
set, “Hold” blinks on the front display panel to indicate that the
keylock function is set.
NOTE
• This remote control unit is equipped with two ENTER buttons (5
and 31 listed above). The ENTER button is useful when using with
the number buttons.
13
Connection
Introduction to Connections
This Player is equipped with the terminals/jacks listed below. Find the corresponding terminal/jack on your video
equipment. Using the supplied cable or commercially available cables, connect the video first. Then connect the
audio.
Video terminals/jacks on this Player
Higher Quality
1 HDMI OUT terminal
Page 15
Page 16
2 COMPONENT VIDEO OUT
jacks
3 S-VIDEO output jack
Page 17
4 VIDEO output jack
Standard Quality
Audio terminals/jacks on this Player
Digital audio connection
Higher Quality
1 HDMI OUT terminal
Page 15
Page 18
2 DIGITAL AUDIO OUT terminal
or jack
Standard Quality
Analog audio connection
Standard Quality
2CH AUDIO output jacks
Page 19
14
Video Connections
Connecting to the HDMI Terminal
You can enjoy high quality digital picture and sound through the HDMI terminal.
When you use AQUOS LINK, make sure to use a certified HDMI cable.
STEPS
1: Be sure to turn off this Player and the equipment before making any connections.
2: Firmly connect an HDMI cable (commercially available) to the HDMI terminals (1 and 2).
CAUTION
• HDMI output and Component Video
output can not be used at the same time.
This Player
NOTE
• Audio transmitted in DTS-HD High
Resolution Audio and DTS-HD Master
Audio formats is output from the HDMI
terminal as BITSTREAM. Connect an
amplifier with a built-in decoder to enjoy
the fine sound quality.
Switching the video output between
HDMI and Component video
• When using an HDMI output, 7.1 ch
Digital Output is available.
When you connect both an HDMI cable and a component
cable to this player, you can switch the outputs using the
remote control. (The video signal is not output over both
terminals at the same time.)
To HDMI OUT terminal
1
1
2
Turn on the power.
Press and hold HDMI button for 5 seconds to
HDMI cable
(commercially available)
switch between “HDMI Out” and “Component
Video Out”.
• While you are holding the button, the current output setting
will be shown with the display blinking, and then the
switched output setting will be displayed on the front panel
display.
• “
” (HDMI Out) or “
displayed alternately on the front panel display.
” (Component Video Out) is
To HDMI input terminal
2
NOTE
• When you connect the player to a SHARP TV with an HDMI cable
only and the TV is turned on, the video output switches to HDMI
automatically. (The above setting is unnecessary.)
• When you connect the player to a TV with an HDMI cable, HDMI
VIDEO OUT is set to “AUTO”. If you don’t get a stable image,
select the desired resolution*.
When you set HDMI VIDEO OUT to a setting other than “AUTO”,
you can only select resolutions* that are compatible with the
connected TV.
Refer to “HDMI VIDEO OUT” on page 35 regarding the resolutions
of the HDMI video output.
*
CAUTION
•
Even when there is no cable connected to the Component video out,
switching the output to CP-oP (Component video out) is still possible.
When CP-oP is selected, there will be no signal from the HDMI
out.
AV receiver
Projector
TV
Equipment with an HDMI terminal
After connecting
• Load a disc and start playback. (Pages 24–27)
• If desired, connect audio equipment. (Pages 18–19)
• Refer to AQUOS LINK function. (Pages 23 and 36)
15
Video Connections
Connecting to the Component Jacks
You can enjoy accurate color reproduction and high quality images through the component jacks.
STEPS
1: Be sure to turn off this Player and the equipment before making any connections.
2: Firmly connect a component video cable (commercially available) to the component jacks (1
and 2).
CAUTION
This Player
• HDMI output and Component Video
output can not be used at the same time.
CAUTION
• You need to switch the output to Component
(Red)
video by pressing HDMI button to enjoy images
via the Component video output. (See page 15.)
• Even when there is no cable connected to the
HDMI video out, switching the output to H-oP
(HDMI Out) is still possible.
(Blue)
(Green)
When H-oP is selected, there will be no signal
from the Component video out.
To COMPONENT
VIDEO OUT jacks
1
VCR
Component video cable
(commercially available)
Connect directly
Blu-ray Disc
Player
LCD TV
To component
2
video input jacks
COMPO-
NENT IN
NOTE
(Red)
• Connect the Blu-ray disc player to LCD TV
directly. If you playback the image via VCR, the
image may deteriorate due to the copy guard
function.
PR
(CR)
(Blue)
PB
(CB)
• When you record the program where copyright
is protected, the copy guard function is activated
automatically; the program can not be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is
not a malfunction. When you watch the program
where copyright is protected, we recommend
that the Blu-ray disc player be connected to LCD
TV directly.
(Green)
Y
Projector
AV receiver
TV
Video equipment with component jacks
After connecting
• Connect audio equipment or the audio terminals of the TV. (Pages 18–19)
16
Video Connections
Connecting to the S-video or Video Jack
You can enjoy the images through the S-video or video jack.
STEPS
1: Be sure to turn off this Player and the equipment before making any connections.
2: Firmly connect an S-video cable (commercially available) or AV cable (supplied) to the S-video or
video jacks (1 and 2, or 3 and 4).
This Player
(Yellow)
VCR
Connect directly
Blu-ray Disc
Player
LCD TV
To VIDEO jack
3
NOTE
To
• Connect the Blu-ray disc player to LCD TV
directly. If you playback the image via VCR, the
image may deteriorate due to the copy guard
function.
• When you record the program where copyright
is protected, the copy guard function is activated
automatically; the program can not be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is
not a malfunction. When you watch the program
where copyright is protected, we recommend
that the Blu-ray disc player be connected to LCD
TV directly.
S-VIDEO
jack
1
2
AV cable (supplied)
S-video cable
(commercially available)
or
To video
4
To
input jack
S-video
input jack
(Yellow)
S-VIDEO
Projector
AV receiver
TV
Video equipment with an S-video or video jack
After connecting
• Connect audio equipment or the audio terminals of the TV. (Pages 18–19)
17
Audio Connections
Connecting to the Digital Audio Terminal or Jack
You can connect audio equipment to the DIGITAL AUDIO OUT terminal or jack.
STEPS
1: Be sure to turn off this Player and the equipment before making any connections.
2: Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals
or a coaxial digital cable (commercially available) to the coaxial digital audio jacks (1 and 2, or 3
and 4).
This Player
• When using COAXIAL/OPTICAL output,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
To COAXIAL
jack
To OPTICAL
terminal
3
4
1
2
Optical digital cable
(commercially available)
Coaxial digital cable
(commercially available)
or
To coaxial input
jack
To optical input
terminal
Amplifier
Audio equipment with a digital audio input terminal or jack
After connecting
• Load a disc and start playback. (Pages 24–27)
18
Audio Connections
Connecting the Audio Jacks
You can connect audio equipment or the TV to the 2CH AUDIO output jacks.
STEPS
1: Be sure to turn off this Player and the equipment before making any connections.
2: Firmly connect the AV cable (supplied) to the audio jacks (1 and 2).
This Player
(Red)
(White)
To 2CH AUDIO
1
AV cable (supplied)
output jacks
To audio input
2
jacks
(Red)
(White)
Amplifier
TV
Audio equipment with audio jacks
After connecting
• Load a disc and start playback. (Pages 24–27)
19
Disc Playback
Before Starting Playback
Approximate operating range of remote
control
Loading the Batteries in the Remote
Control
Remote control sensor
1
Press down on the tab in the direction of the
arrow to remove the battery cover.
30º
30º
7 m
Remote control unit
2
Load the two “AAA” size batteries (R-03 size,
UM/SUM-4) supplied with the remote control
unit. Make sure that the battery poles m and n
are positioned as indicated.
Connecting the Power Cord
Plug the supplied AC cord into the AC IN terminal on the rear
of the Player. Then plug into AC outlet.
3
Slide the battery cover in the direction of the
arrow until it clicks.
To AC IN terminal
To AC outlet
NOTE
• Do not subject the remote control unit to shock, water or
excessive humidity.
NOTE
• Place the Player close to the AC outlet, and keep the power plug
within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE
UN-INSULATED PARTS OF ANY CABLES WHILE THE AC CORD
IS CONNECTED.
• The STANDBY indicator blinks while the Player is preparing for
starting up. You cannot turn the Player on until the STANDBY
indicator stops blinking.
• The remote control unit may not function if the Player's remote
sensor is in direct sunlight or any other strong light.
• Incorrect use of batteries may cause them to leak or burst. Read
the battery warnings and use the batteries properly.
• Do not mix old and new batteries, or mix different brands.
• Remove the batteries if you will not use the remote control unit for
an extended period of time.
20
Before Starting Playback
If remote control does not
work
Setting the Remote Control
Code
First, press POWER to turn on this player.
Press POWER on the remote control and
check the front panel display (RC-1, RC-2 or
RC-3).
Set the remote control code according to the
display and press POWER to see if you can
turn on/off the Player.
• 3 types of remote control codes operate this
Player: RC-1, RC-2 and RC-3. If you operate
this Player by remote control along with another
SHARP Blu-ray Disc Player or DVD Player placed
next to it simultaneously, switching the remote
control code (both the Player and remote control)
to one of the signals (RC-1, RC-2 or RC-3) will let
you operate only with this Player.
• Make sure to set the Player and remote control to
the same remote code. You can not operate the
Player if they are not set to the same code.
Operating a SHARP TV
Using the Remote Control
Setting the Remote Control
Code of the Remote
The Universal Remote Control may operate the
basic functions of the SHARP TV.
Example: Setting the code to “RC-3”.
TV function control
1
Press and hold 3 first and then
POWER on the remote control
together for more than 5 seconds.
• TV Power: POWER
• TV Channel up/down: CH r/s
• TV Volume up/down: VOL e/f
• TV-AV Selector: INPUT
2
Press POWER to turn off the player.
POWER
Setting the Remote Control
Code of the Player
3
Point the remote control at the
player, then press and hold the
DISPLAY button.
Remote control sensor
The display on the player changes
as shown below, and the player will
be set to the same number as the
remote control.
Example: Change “RC-1” to “RC-3”.
Approx. 2 sec. later
Approx. 3 sec. later
21
Before Starting Playback
Turning the Power On
Language Setting
Changing the on-screen
display language
Turning the power on
Press POWER on the remote control or
on the Player to turn on the power of the
Player.
1
Press SETUP to display the SETUP
MENU screen.
2
3
Press a/b/c/d to select “ON
SCREEN LANGUAGE”, then press
ENTER.
Entering standby
Press POWER on the remote control or
on the Player to enter standby.
DISPLAYS THE TITLE LIST
SETTINGS
• If you press POWER again immediately after
entering standby, the Player may not turn on. If this
happens, wait for 10 seconds or more and then
turn on the power again.
ON SCREEN LANGUAGE
PICTURE
POWER
Press a/b to select the language
you want to display on the screen,
then press ENTER.
ON indicator
BD mode indicator
ENGLISH
ESPAÑOL
FRANÇAIS
DVD/CD mode indicator
STANDBY indicator
QUICK indicator
NOTE
• To select the DVD disc language, such as subtitle
language, etc., see page 25.
Indicators on the Player
ON indicator
Green on
Power on
QUICK indicator
White on
When “QUICK START”
is set to “YES” (See
page 36.)
STANDBY indicator
Red blinks
Preparing for standby
Standby
Red on
BD and DVD/CD mode indicators
Off
No disc
Blue on
White on
White blinks
Playing back
Disc stopped
Loading a disc
• When you turn on the POWER, the MENU screen
automatically displays for a while.
Press EXIT to erase the display.
22
Before Starting Playback
Turning Off the LCD
Backlight and Indications
Using AQUOS LINK
Controlling the Blu-ray disc
player using AQUOS LINK
If you feel that the indicators on the Player are
too bright when watching movies, you can turn
them off except for the ON indicator.
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics
Control), with AQUOS LINK you can
interactively operate this player with your
SHARP AQUOS TV.
Quick operation
Press LIGHT to turn the LCD backlight
on or off.
What you can do with AQUOS LINK
When you connect this player to the LCD TV
compatible with AQUOS LINK using an HDMI
cable, you can perform the function listed
below. (See page 15 for connecting to the
HDMI terminal).
SETUP MENU operation
1
2
3
Press SETUP to display the SETUP
MENU screen.
Press a/b/c/d to select
“SETTINGS”, then press ENTER.
Playback function turns on the LCD TV
immediately.
When you start to playback of this player,
Power of LCD TV will be turned on and the
playback image will appear on the screen.
Press a/b to select “FRONT
DISPLAY/LED”, then press ENTER.
Automatic input select function
When you start playback of this player, the input
selector of the LCD TV will automatically switch
to the LCD TV input terminal connected to
the player and the playback image will appear
on the screen, even if you are watching a TV
program.
AUDIO VIDEO SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY/LED
VERSION
USB MEMORY MANAGEMENT
SOFTWARE UPDATE
SYSTEM RESET
Automatic power off function
If you turn off the LCD TV when this player is
in stop mode, the power of this player will be
turned off automatically. (In the case, while
playing back a disc, the power does not turn
off.)
4
5
Press c/d to select “ON” or “OFF”,
then press ENTER.
Press SETUP or EXIT to exit.
Automatic power on function
When you switch to the LCD TV input terminal
connected to this player, the power of this
player will be turned on automatically.
NOTE
• In order to make AQUOS LINK available, set up
AQUOS LINK on the LCD TV that is connected to
this player. See page 36 regarding the setup of this
player.
Refer to the Operation Manual of the TV for details
regarding setup.
23
BD/DVD/CD Playback
This section explains playback of commercially
available BD Video and DVD Video discs (like
movies), CDs, and recorded DVD-RW/R discs.
BD/DVD Video Playback
BD VIDEO DVD VIDEO
BD-RE
BD-R
Opening the front panel door
1
2
Load a disc.
This function indicates the front panel door can
be opened/closed automatically. By opening
the door, you can open/close the disc tray and
operate the playback functions.
• Playback may begin automatically,
depending on the disc.
Press d PLAY.
• Playback begins from the first title.
• The menu may be displayed first, depending
on the disc. Perform playback operation by
following the directions on the screen.
Press DOOR on the Player to open/close
the front panel door.
NOTE
• The disc load time may vary depending on the disc.
To stop playback
Press H STOP.
DOOR
Resume playback function
NOTE
• If the OPEN/CLOSE button is pressed when the
front panel door is closed, the disc tray will open
after the door automatically opens.
•
If you press d PLAY next, playback will resume from
the point where the Player was previously stopped.
To playback from the beginning, cancel resume
mode by pressing H STOP, then press d PLAY.
(This may not work depending on the type of disc. In
this case, open the disc tray or enter standby.)
• If the DOOR button is pressed when both the door
and the disc tray are open, the disc tray will retract
and then the door will close.
• Also, when the door is opened during a manual
operation, it will automatically open all the way after
opening slightly.
• If the disc tray is closed by pressing the OPEN/
CLOSE button on the Player, the front panel door
will not be closed automatically. However, pressing
the OPEN/CLOSE button on the Remote control
allows you to close the door automatically.
• The disc tray may collide with the front panel door
if a situation occurs such as when an unsupported
disc is inserted or the disc tray fails to close
automatically.
NOTE
• Resume playback may not function depending on
the disc.
BD/DVD Menus
•
This section explains how to play back a BD/DVD video
disc with a top menu, disc menu or pop-up menu.
• The titles listed in the top menu and a disc guide
(for options like subtitles and audio languages) are
given in the disc menu.
Loading a Disc
Start playback by selecting a
title from the top menu
1
2
Press POWER to turn on the power.
BD VIDEO DVD VIDEO
Press DOOR on the Player to open
the front panel door.
1
Press TOP MENU.
3
Press OPEN/CLOSE to open the
disc tray.
• The top menu screen is displayed.
T O P M E N U
POWER
OPEN/CLOSE
1
3
2
Jazz
Latin
4
Classic
Rock
2
Press a/b/c/d to select the title,
4
Load a disc on the disc tray.
then press ENTER.
• Insert the disc with the label face up.
• The selected title is played back.
• In case of disc recorded on both sides, face
down the side to play back.
NOTE
• The procedure explained on this page is the basic
operation procedure. Procedures vary depending
on the BD/DVD video disc, so you may need to
follow the instructions in the BD/DVD video disc
manual or the instructions displayed on the screen.
• A top menu is not displayed for a DVD-RW/R
(Video format) if it has not been finalized.
Top menu
•
With some BD/DVD discs, the top menu may be referred
to as the “Title Menu”. Use TOP MENU on the remote
control when the instructions refer to “Title Menu”.
5
6
Press OPEN/CLOSE to close the
disc tray.
• If no top menu is available, the TOP MENU button
will have no effect.
Press DOOR to close the door.
24
BD/DVD/CD Playback
Using the disc menu
Use of Picture in Picture function
(secondary video playback)
DVD VIDEO
BD VIDEO
Example: Select “SUBTITLE LANGUAGE”.
BD-Video that includes secondary video
compatible with Picture in Picture can be
played back with secondary video displayed on
a 2-picture screen.
1
2
Press POP-UP MENU.
• The disc menu screen is displayed.
Press a/b to select “SUBTITLE
LANGUAGE”, then press ENTER.
• The screen for selecting the subtitle
language is displayed.
• See the disc manual for instructions on the
playback of secondary video.
1
Press PinP during playback to show
the 2-picture screen.
MENU
1
2
3
AUDIO LANGUAGE
SUBTITLE LANGUAGE
AUDIO
3
4
Press a/b to select the subtitle
Primary
video
Secondary
video
language, then press ENTER.
Press POP-UP MENU to exit.
2
To remove the secondary video,
press PinP again.
• The secondary video for Picture In Picture
may automatically display and be removed
depending on the content. Also, displayable
areas may be restricted.
Using the pop-up menu
BD VIDEO
1
Press POP-UP MENU during playback.
• The pop up menu screen is displayed.
• The menu contents displayed vary
depending on the disc. For details on how to
see and operate the pop-up menu, refer to
the manual for the disc.
Virtual Package
BD VIDEO
Some BD-Video discs are compatible with a
function where data is copied to local storage
(USB memory device, etc.) and played back
along with the primary video as secondary
video, secondary audio, subtitles, etc.
This function is called Virtual Package.
Virtual Package data is automatically copied
to the local storage prior to playback. The
playback methods vary depending on the disc.
A variety of functions can be enjoyed during
playback of BD-Video compatible with Virtual
Package, which features data copied to the BD
Local Storage separate from the BD Disc.
This player uses a USB memory device for Local
Storage.
Pop-up menu
Previous page
Next page
2
3
Press a/b/c/d to select the
desired item, then press ENTER.
Press POP-UP MENU to exit.
• The pop-up menu will automatically
disappear for some discs.
Connect a USB memory device (USB2.0 256MB
or greater) to the BD STORAGE/SERVICE
terminal (page 12) on the back of this player.
• See the disc manual for required storage space
and instructions on copying/playback.
NOTE
• If there is insufficient storage space, the data will
not be copied. Delete unneeded data or use a new
USB memory device.
• If a USB memory device containing other data
(previously recorded) is used, the video and audio
may not play back properly.
• If the USB memory device is disconnected from
this player during playback of Virtual Package,
playback of the disc will stop.
See page 38 for deletion of the Virtual Package
data copied to the USB memory device.
25
BD/DVD/CD Playback
DVD-R/-RW Playback
DVD-R DVD-RW
You can play back a recorded disc (finalized disc only).
Playback from the beginning
1
2
Load a recorded disc.
Press dPLAY.
• Playback begins from title 1.
Playback by selecting a title
1
2
Load a recorded disc.
Press TOP MENU.
• The TITLE LIST screen is displayed.
NOTE
• If the TITLE LIST is not displayed, perform step 2
again after starting and then stopping playback.
DISPLAYS THE TITLE LIST
SETTINGS
PICTURE
• The TITLE LIST screen also can be displayed
by pressing ENTER after choosing “DISPLAYS
THE TITLE LIST” in SETUP MENU.
ON SCREEN LANGUAGE
• When more than seven titles are displayed, switch pages by pressing PAGE r/s.
The same operation can be performed by pressing KSKIP/k or LSKIP/l.
PROGRAM 1
9:30 AM 110 MIN.
Information of selected title
5/21
FRI
[FROM OLD]
1
2
3
4
PROGRAM 1
PROGRAM 2
PROGRAM 3
PROGRAM 4
5/21
8/15
7/3
FRI
FRI
110 MIN.
110 MIN.
MON 56 MIN.
THU 40 MIN.
Title Name
Recording Date
Recording Duration
9/18
B
C
D
SORTING
PLAYLIST
FUNCTIONS
Caption for Color Button
3
4
Press a/b to select the title, then press ENTER.
• Playback of the selected title will begin.
You can playback by pressing d PLAY instead of pressing ENTER.
Press H STOP to stop playback.
NOTE
• “Finalize” refers to a recorder processing a recorded disc so that it will play in other DVD players/recorders as
well as this player. Only finalized DVD discs will play back in this player. (This player does not have a function to
finalize discs.)
26
BD/DVD/CD Playback
Playback by selecting a PLAY
LIST
Playing back the title you
stopped while being played.
1
2
Load a recorded disc.
1
Press D (Yellow) while the TITLE
LIST screen is displayed.
Press TOP MENU.
• The TITLE LIST screen is displayed.
PROGRAM 1
5/21
FRI
9:30 AM 110 MIN.
3
Press C (Blue), then press ENTER.
• The PLAY LIST screen is displayed.
PLAYBACK
PROGRAM 1
5/21
FRI
9:30 AM 110 MIN.
FROM BEGINNING
FROM CONTINUED
1
2
PROGRAM 1
PROGRAM 2
5/21
8/15
FRI
FRI
110 MIN.
110 MIN.
2
Press c/d to select the type of
Playback, then press ENTER.
• Playback of the title will begin.
C
D
ORIGINAL
FUNCTIONS
NOTE
4
5
Press a/b to select the title, then
press ENTER.
• “Finalize” refers to a recorder processing a
recorded disc so that it will play in other DVD
players/recorders as well as this player. Only
finalized DVD discs will play back in this player.
(This player does not have a function to finalize
discs.)
• Playback of the selected title will begin.
Press H STOP to stop playback.
Sorting the titles
Audio CD Playback
1
Press B (Green), then press ENTER
while the TITLE LIST screen is
displayed.
AUDIO CD
2
Select the type of sorting by
pressing a/b, then press ENTER.
Playback from the beginning
1
2
Load an audio CD.
FROM NEW
FROM OLD
TITLES
Press dPLAY.
• Playback begins from the first track.
3
Press H STOP to stop playback.
• The displayed titles are rearranged by
selected sorting type.
27
Playback Functions
BD VIDEO
DVD VIDEO
AUDIO CD
BD-R
DVD-R
BD-RE
DVD-RW
Repeat Playback of a
Title or Chapter (Repeat
Playback)
NOTE
• Some operations in the following playback
functions cannot be performed depending on the
specifications of the disc.
1
Play back the title or chapter you
want to repeat.
2
3
Press REPEAT.
Press c/d to select the type of
Repeat Playback.
• PLAYBACK TITLE: Repeats the title
currently being played back.
• PLAYBACK CHAPTER: Repeats the
chapter currently being played back.
• SCENE SELECTION: Repeats the
specified scene of title or chapter.
Fast Forward/Reverse
(Search)
Fast Forward/Reverse functions when G REV
or J FWD is pressed during playback.
Example: When J FWD is pressed
• The search speed will cycle as follows each time
you press the button.
When playing back a DVD
• You cannot fast forward or fast reverse from one
title and continue to another title (except when
playing audio CDs).
PLAYBACK TITLE
PLAYBACK CHAPTER
SCENE SELECTION
Skipping to the Next or the
Start of the Current Chapter
(Track)
• Press n RETURN to cancel without
setting the type of Repeat Playback.
• For Audio CD, you can select
“PLAYING DISC”, “PLAYING TRACK”
and “SPECIFY THE PART” as Repeat
Playback options.
Skipping (to the beginning of a chapter or track)
functions when T SKIP/k or U SKIP/l
is pressed during playback.
4
Press ENTER.
Pause/Frame Advance
Playback
• Pause functions when F PAUSE is pressed during
playback. (If you are playing back an audio CD, the
CD will also pause.)
Example: Repeat playback of a title
(TITLE)
BD VIDEO
1 / 3
5 / 25
•
Frame Advance Playback functions when U SKIP/l
00 : 20 : 30
2 ENGLISH
1
is pressed during Pause.
• Frame Advance Playback may not function properly
with discs other than DVD-RW (VR format).
• Some BD/DVD Video discs are not compatible with
Pause/Frame Advance Playback.
1
5 . 1ch
ON TITLE REPEAT
NOTE
ENTER
SELECT
ENTER
RETURN
• Frame Advance/Reverse Playback can be performed
for DVD discs by pressing L SKIP/l or
K SKIP/k during Pause.
ON TITLE REPEAT
Slow Playback
Slow Playback functions when T SKIP/k or
U SKIP/l is pressed more than 2 seconds
during pause.
5
Press REPEAT-OFF or REPEAT to
return to normal playback.
• Press d PLAY to return to normal playback.
NOTE
• This doesn't work for audio CDs.
• Reverse Slow Playback cannot be performed for
BD video.
Skip Search
Playback skips 30 seconds ahead when SKIP
SEARCH is pressed during playback.
Replay
Playback jumps back 10 seconds when
REPLAY is pressed during playback.
28
Playback Functions
Partial Repeat Playback
(Repeat Playback of a
Specified Part)
Switching Audio
You can change the audio output channel using
AUDIO.
Each time AUDIO is pressed, the audio
channels change as follows:
DVD VIDEO
AUDIO CD
DVD-R
DVD-RW
BD VIDEO
DVD VIDEO
NOTE
The audio track currently being played back will
be displayed.
• Some operations in the following playback
function cannot be performed depending on the
specifications of the disc.
DVD-RW
DVD-R
1
2
Press REPEAT during playback.
When a recorded broadcast with stereo or
monaural audio is played back:
“Stereo” is displayed. (Audio cannot be
switched.)
Press c/d to select “SCENE
SELECTION”, then press ENTER.
NOTE
• When you play a program recorded in stereo
or monaural, and if you are listening to the
BITSTREAM sound via the digital output jack, you
cannot select the audio channel. Set “AUDIO OUT”
to “PCM” (Page 35), or if you want to change the
audio channel, listen via the analog output jacks.
PLAYBACK TITLE
PLAYBACK CHAPTER
SCENE SELECTION
SET START POINT
Switching Subtitles
If subtitles are provided in multiple languages,
you can switch between them.
3
4
“SET START POINT” displays.
Press ENTER at the scene where
you want.
Press SUBTITLE during playback.
• “SET END POINT” displays.
• The display indicates the subtitle number
currently being played back, and the subtitles
appear.
Each time SUBTITLE is pressed, the
subtitles change.
• “– –” is displayed if a disc has no subtitles.
• You can also select “OFF”.
Press ENTER at the scene where
you want to set the end point.
• You can press V FWD to fast forward
to the scene where you want to set the
end point. When you reach the desired
scene, simply press I PLAY and then
ENTER to set the end point. To cancel
Repeat Playback, press REPEAT-OFF
or REPEAT.
NOTE
• Press LSKIP/l, the Repeat Playback is
cancelled and the next chapter being play back.
• Press KSKIP/k once, the Repeat Playback
is cancelled and the player returns to the start of
current chapter (track).
• If you press KSKIP/k again (within about 5
seconds) the player will skip to the beginning of the
previous chapter (track).
• For Partial Repeat Playback, set the start and end
points within the same title.
• Repeat Playback may be forbidden depending on
the disc.
• Partial Repeat Playback may not work in multi-
angle scenes.
• If you press DISPLAY, you can confirm the Repeat
Playback status.
29
Playback Functions
NOTE
Switching the Angle
• Settings for audio, subtitles and angle can be
changed also in Function Control Screen (Page 32).
• The operations of subtitles, angle and audio differ
according to each disc. You may need to refer to
the operation manual of the disc.
If multiple angles are recorded, you can switch
between them.
1
Press ANGLE during playback.
• The display indicates the angle number
currently being played back. Each time
you press ANGLE, the angle switches.
• “–” is displayed if a disc is recorded
with only one angle.
• The following operations will not work when playing
back an audio CD:
Slow Playback, Frame Advance
Display of functions
• The display for subtitles, angle or audio
automatically disappears after 5 seconds.
Switching between functions
• You can switch the subtitles, angle and audio at the
Function Control screen (Page 32).
1
• The operation for each function varies depending
on the disc. See the manual for the disc.
Fast Forward/Reverse
• You cannot perform Fast Forward/Fast Reverse
between titles. At the end or beginning of the title,
Fast Forward/Fast Reverse will be cancelled and
normal playback will automatically resume.
• Subtitles are not played back with BD/DVD video
discs during Fast Forward and Fast Reverse.
• Depending on the disc and the scene being played
back, the Player may not operate at the speed
listed in this manual when performing Fast Forward.
To return to the previous angle, press ANGLE
to cycle through the angles until you return to
the original angle.
Slow Playback
• You cannot perform Slow Playback between
titles. At the end of the title, Slow Playback will be
cancelled and normal playback will automatically
resume.
Displaying the Angle Mark
You can change settings so that Angle Mark
appears in the right bottom part of the screen
when multiple angles are recorded. (The
Angle Mark is only displayed for DVD video.)
The settings can be changed in “SETTINGS”
- “PLAYBACK SETTING” - “ANGLE MARK
DISPLAY” (Page 36).
Repeat Playback
• Repeat Playback may be forbidden depending on
the disc.
• Partial Repeat Playback may not work in multi-
angle scenes.
• For Partial Repeat Playback, set the start and end
points within the same title.
30
JPEG File Playback
CD-R
CD-RW
4
5
Press T SKIP/k or U SKIP/l
JPEG
JPEG
to replace one image with another.
• The same operation can be performed by
pressing c/d or S REV/V FWD.
• Press n RETURN if you wish to return to
the folder selection screen.
NOTE
• This Player can play still images (JPEG files) that have
been recorded on CD-RW/R discs. For details on the
still images that you can play using this Player, refer to
“About the JPEG file format” on page 8.
To stop the still image play at any
time, press H STOP.
• During “Normal play”, still images are played
one by one while during “Slide show”, they are
automatically replaced one after another.
Playing back Slide Show
Playing back still images in
sequence
1
In Step 2 of the left side “Playing
back still images in a selected folder”,
press d PLAY (SLIDE SHOW).
• The still images inside the selected folder are
played as a slide show.
1
Load the disc containing the still
images, and press d PLAY.
• The first still image appears on the screen.
• Press T SKIP/k or U SKIP/l to
proceed to the next or previous still image.
The same operation can be performed by
pressing c/d or S REV/V FWD.
2
3
To pause the playback at any time,
press F PAUSE.
• Press d PLAY to resume playback.
To stop the play at any time, press
2
To stop the still image playback at
any time, press H STOP.
H STOP.
• Press n RETURN to play a slide show of
still images in another folder.
Playing back still images in a
selected folder
Setting slide show speed/
repeat playback
1
Load the disc containing still
1
Press C (Blue) (SLIDE SHOW MENU)
during the folder selection screen.
• The setting screen for SLIDE SHOW SPEED/
REPEAT MODE SETTING appears.
images, then press SETUP.
2
Press a/b/c/d to select
“PICTURE”, then press ENTER.
2
Press a/b to select the SLIDE
SHOW SPEED, then press ENTER.
SLIDE SHOW SPEED
REPEAT MODE SETTING
DISPLAYS THE TITLE LIST
SETTINGS
NORMAL
ON SCREEN LANGUAGE
PICTURE
•
The slide show speed may be selected from
“FAST”, “NORMAL”, “SLOW1” and “SLOW2”.
3
Use a/b/c/d to select the folder
whose still images are to be played,
then press ENTER.
3
4
Press a/b to select the desired
speed, then press ENTER.
8/15
Press a/b to select the REPEAT
MODE SETTING, then press ENTER.
SLIDE SHOW SPEED
REPEAT MODE SETTING
YES
NO
ENTER
EXIT
EXIT
SELECT
ENTER
SLIDE SHOW
C
SLIDE SHOW MENU
• When seven or more folders are displayed,
switch pages by pressing PAGE r/s.
5
6
Press c/d to select the desired
item, then press ENTER.
1/77
Press EXIT to exit.
31
Settings During Playback
Function control operation
procedure
Function Control
This allows you to adjust various settings at
once, like subtitles, angle settings and the title
selection for Direct Playback. You can adjust
the video and audio to suit your preferences.
The operations are the same for BD and DVD.
1
Press FUNCTION during playback.
• The Function Control screen is
displayed on the TV.
BD VIDEO
Function control screen
BD VIDEO
1 / 3
1
5 / 25
1 / 3
00 : 20 : 30
2 ENGLISH
1
5 / 25
00 : 20 : 30
2 ENGLISH
1
1
OFF
5 . 1ch
2
1
OFF
5 . 1ch
ENTER
SELECT
ENTER
RETURN
ENTER
SELECT
ENTER
RETURN
2
Press a/b to select the desired
setting, then press ENTER.
3
• For a description of each setting, see
“Functions which can be set” (Page 33).
1 Playback status display
Shows the operation status and the disc type.
BD VIDEO
2 Setting items
Selects a title or chapter for playback, or
performs video/audio settings.
1 / 3
5 / 25
00 : 20 : 30
2 ENGLISH
1
1
OFF
5 . 1ch
• Title Number (Direct Title Skip)
• Chapter Number (Direct Chapter Skip)
• Playback Elapsed Time (Direct Time Skip)
• Subtitle Language
• Angle Number
• Audio
• Repeat
ENTER
SELECT
ENTER
RETURN
3
4
Press a/b/c/d to set, then press
ENTER.
3 Operation guide display
Provides help on remote control button
operations.
• Operations vary depending on
the setting. Follow the operation
instructions on the screen.
Press n RETURN or FUNCTION
to close the Function Control
screen.
NOTE
• If “– –” is displayed for an option like title number
or subtitles, the disc has no titles or subtitles which
can be selected.
• The displayed items vary depending on the disc.
• If you access the Function Control screen during
playback of a BD/DVD video, it may be impossible
to operate the BD/DVD video playback. In cases
like this, close the Function Control screen.
32
Settings During Playback
Functions which can be set
Title Number (Direct Title Skip)
• Shows the title number being played back. You
can skip to the start of the title.
• To skip to the start of a selected title, press the
Number buttons to enter the title number when
this option is highlighted.
Chapter Number (Direct Chapter Skip)
• Shows the chapter number being played back.
You can skip to the start of the chapter.
• To skip to the start of a selected chapter, press
the Number buttons to enter the chapter
number when this option is highlighted.
Playback Elapsed Time (Direct Time Skip)
• Shows the elapsed time from the beginning of
the disc to the present. This lets you skip to a
specific time.
• Press c/d to select the Hour, Minute or
Second, then press a/b or the Number
buttons to set the time. Press ENTER to start
playback at the set time.
NOTE
• ENTER button under the Cover: Enters the input
number.
• CLEAR button under the Cover: Clears the input
number.
Subtitle Language
• Shows the currently selected subtitle language.
If subtitles are provided in other languages, you
can switch to your preferred language.
Angle Number
• Shows the currently selected angle number. If
the video is recorded with multiple angles, you
can switch the angle.
Audio
• Shows the currently selected type of audio. You
can select the desired type of audio.
Repeat
• The current Title (or Chapter) or partial
segments can be repeatedly played back.
Repeat Playback is also possible with the
REPEAT button on the remote control.
NOTE
• These functions may not work with all discs.
33
Settings
SETTINGS
Common operations
The “MENU” enables various audio/visual settings and adjustments on the functions using the remote control
unit. You need to call up the OSD to perform settings for this player. The following is the explanation for the basic
operations of the “MENU”.
Example: Setting “FRONT DISPLAY/LED”
1
3
Display the MENU
Screen
Select the next item
Press SETUP to display the SETUP
MENU screen.
Press a/b/c/d to select
“SETTINGS”, then press ENTER.
Press c/d to select the desired item,
then press ENTER.
ON
OFF
DISPLAYS THE TITLE LIST
SETTINGS
PICTURE
ON SCREEN LANGUAGE
Press n RETURN to return to the
previous “MENU” page.
2
Select a menu item
4
Exit the MENU screen
Press a/b to select “FRONT DISPLAY/
LED”, then press ENTER.
Press SETUP or EXIT to exit.
AUDIO VIDEO SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY/LED
VERSION
USB MEMORY MANAGEMENT
SOFTWARE UPDATE
SYSTEM RESET
Basic Operation for PLAYBACK SETTING
5
6
Enter your 4-digit password.
• You cannot move to the next setting screen until you
can input the correct password.
Example: Setting “PARENTAL CONTROL” under
“PLAYBACK SETTING”.
1
2
3
Press SETUP to display the SETUP MENU
-
-
-
-
-
-
-
-
screen.
Press a/b/c/d to select “SETTINGS”, then
press ENTER.
Press c/d to select the parental control level
for DVD video, BD-ROM, and then select the
country code. Press ENTER after making each
selection.
Press a/b to select “PLAYBACK SETTING”,
then press ENTER.
When setting the password for the first time.
1 Press c/d to select “YES” to enter the password
PARENTAL CONTROL
DISC LANGUAGE
ANGLE MARK DISPLAY
PASSWORD SETTING
LEVEL 3
setting menu, then press ENTER.
2 Enter the 4-digit number.
3 Press ENTER to move to the next setting screen.
0
4
Press a/b to select “PARENTAL CONTROL”,
then press ENTER.
USA
7
Press SETUP or EXIT to exit.
34
SETTINGS
HDMI AUTO DETECTION
AUDIO VIDEO SETTINGS
This function enables the video output to switch to HDMI
automatically when the player detects a TV connected with
an HDMI cable.
TV ASPECT RATIO
You can set the screen aspect ratio of the connected TV, and
adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the “TV ASPECT RATIO”
setting.
Item
YES, NO
SECONDARY AUDIO
This toggles the clicking sound on the menu and audio with
secondary video in picture in picture mode for BD-Video.
• Select “OFF” when enjoying the high quality sounds of BD-Video.
Item
WIDE 16:9: Select this when connecting to a TV with a 16:9
screen aspect ratio.
NORMAL 4:3: Select this when connecting to a TV with a 4:3
screen aspect ratio.
Item
ON, OFF
AUDIO OUT
You can set AUDIO OUT when connecting to SURROUND
equipment.
<When selecting NORMAL 4:3>
Item
LETTER BOX: If you connect to a TV with a screen aspect ratio
of 4:3 and playback a DVD with 16:9 video, the video will be
played back with black bands at the top and bottom while
maintaining the 16:9 ratio.
PAN SCAN: If you connect to a TV with a screen aspect ratio
of 4:3 and playback a DVD with 16:9 video, the video will be
played back with the left and right sides of the image cut off to
display in 4:3 screen aspect ratio. (This function works if the
disc is labelled for 4:3PS.)
1
This sets the audio output connected to
SURROUND equipment.
Item
HDMI OUTPUT: Select this when you connect using HDMI OUT
terminal.
DIGITAL OUTPUT: Select this when you connect using DIGITAL
AUDIO OUT terminal (OPTICAL or COAXIAL).
2ch AUDIO OUTPUT: Select this when you do not use
SURROUND sound equipment.
2
You can set the audio output mode for each
output terminal.
COMPONENT VIDEO OUT
This sets the resolution of the component video output.
Some TV are not fully compatible with the Blu-ray disc
player, which may cause the image distortion. In this case,
press COMPONENT RESET on the remote control for five
seconds. Component video out will be reset to 480i (factory
preset value).
1 This sets the audio output mode for HDMI OUT terminal
when selecting HDMI OUTPUT.
NOTE
• When the secondary audio is set to “ON”, PCM is automatically
selected as the audio output mode.
Item
Item
• Select this when connecting to HDMI
equipment with a built-in decoder for
DOLBY DIGITAL, etc.
• Setting to BITSTREAM will output each
audio signal by BITSTREAM.
• Select this when connecting to multi-
channel HDMI equipment.
BITSTREAM:
1080i, 720p, 480p, 480i
CAUTION
•
HDMI output and Component video output can not be used at the
same time.
PCM (SURROUND):
• Setting to PCM (SURROUND) will output
by LINEAR PCM by decoding audio
signals recorded in each audio output
mode such as DOLBY DIGITAL, DTS.
HDMI VIDEO OUT
This sets the resolution of the HDMI video output.
Item
2 This sets the audio output mode for DIGITAL AUDIO
OUT (COAXIAL jack/OPTICAL terminal) when selecting
DIGITAL OUTPUT.
AUTO, 1080p, 1080i, 720p, 480p
CAUTION
Item
BITSTREAM:
• HDMI output and Component video output can not be used at the
same time.
• Select this when connecting to
SURROUND equipment with a built-in
decoder for DOLBY DIGITAL, etc.
• Setting to BITSTREAM will output each
audio signal by BITSTREAM.
• Select this when connecting to 2 channel
stereo audio equipment.
• Setting to PCM will output by converting
each audio signal into PCM 2 channel
audio signal.
NOTE
• When the BD player is connected to a 1080p 24Hz compatible
TV and the HDMI VIDEO OUT is set to AUTO, 1080p 24Hz will
automatically be displayed when compatible discs are played
back.
PCM:
At this time, there is no output from the COMPONENT VIDEO OUT
jacks, S-VIDEO output jack, and VIDEO output jack.
NOTE
• See page 37 for information on output of next generation audio
formats.
35
SETTINGS
DYNAMIC RANGE CONTROL
PLAYBACK SETTING
This lets you adjust the range between the loudest and
softest sounds (dynamic range) for playback at average
volume. Use this when it is hard to hear dialog.
PARENTAL CONTROL
This lets you set the Parental Control depending on the disc
content. The available Parental Control Levels are shown
below.
The 4-digit password number needs to be entered before the
Parental Control Levels and the Country Code are set. The
Parental Control Levels and the Country Code cannot be set
if a password has not been created or the password is not
entered.
Item
NORMAL: The same audio output range is played as the original
recorded audio output range.
SHIFT*: When Dolby Digital audio is played back, the dynamic
range of the audio is adjusted so that the dialog portion can be
heard easily. (If the audio sounds abnormal, set to “NORMAL”.)
AUTO: When you play back audio in the Dolby TrueHD format,
the dynamic range is automatically adjusted.
*
Lower the audio volume before setting. If you do not do so, the
speakers may emit a loud sound or excessive output may be
applied to the speakers.
Item (For DVD-video)
8 and OFF: All DVD-video can be played.
1-7: Prohibits play of DVD-video with corresponding ratings
recorded on them.
QUICK START
Item (For BD-ROM)
This turns the QUICK START function on and off.
When the QUICK START function is on:
• The startup time of the Player is reduced when resuming playback
from standby.
NO LIMIT: All BD-video can be played.
0-99 year(s): Prohibits play of BD-video with corresponding
ratings recorded on them.
• However, power consumption will increase.
Item (COUNTRY CODE)
Sets the Country Code. Refer to the Country Code List (page 37)
because the ratings differ according to the country.
Item
YES, NO
NOTE
• Refer to “Basic Operation for PLAYBACK SETTING” on page 34
for details.
AUTO POWER OFF
This sets the Player so that power is automatically shut off if
playback is stopped for about 10 minutes.
DISC LANGUAGE (DISC PRIORITY LANGUAGE)
Item
YES, NO
This lets you select the language for subtitles, audio and
menus displayed on the screen.
Item (SUBTITLE)
Refer to the Language Code List. (Page 37)
AQUOS LINK
This lets you set the Player to receive the control signal from
the AQUOS LINK remote control via the HDMI cable.
Item (AUDIO)
Refer to the Language Code List. (Page 37)
Item
YES, NO
Item (MENU)
Refer to the Language Code List. (Page 37)
NOTE
• For details, refer to the operation manual of TV.
ANGLE MARK DISPLAY
This lets you turn the Angle Mark Display on or off when DVD
video recorded with multiple angles is played back. (The
Angle Mark is displayed in the lower right screen.)
Item
YES, NO
PASSWORD SETTING
This sets the password for setting or changing the Parental
Control Level.
Item
YES: Enter the 4 digit number.
NO
NOTE
• When you forget the password, you can reset the current
password using SYSTEM RESET under SETTINGS. (See page 37.)
• You can also set the new password if desired.
36
SETTINGS
FRONT DISPLAY/LED
SYSTEM RESET
If you feel that the indicators on the Player are too bright
when watching movies, you can turn them off except for the
ON indicator.
You can reset all settings except the password to the factory
presets.
Item
RESET, NOT RESET
Item
ON, OFF
VERSION
When you select “VERSION”, the system software version is
displayed.
Country Code List
USA / CANADA / JAPAN / GERMANY / FRANCE / UK / ITALY / SPAIN / SWISS / SWEDEN / HOLLAND / NORWAY /
DENMARK / FINLAND / BELGIUM / HONG KONG / SINGAPORE / THAILAND / MALAYSIA / INDONESIA / TAIWAN /
PHILIPPINE / AUSTRALIA / RUSSIA / CHINA
Language Code List
AA Afar / AB Abkhazian / AF Afrikaans / AM Ameharic / AR Arabic / AS Assamese / AY Aymara / AZ Azerbaijani /
BA Bashkir / BE Byelorussian / BG Bulgarian / BH Bihari / BI Bislama / BN Bengali, Bangla / BO Tibetan / BR Breton /
CA Catalan / CO Corsican / CS Czech / CY Welsh / DA Danish / DE German / DZ Bhutani / EL Greek / EN English /
EO Esperanto / ES Spanish / ET Estonian / EU Basque / FA Persian / FI Finnish / FJ Fiji / FO Faroese / FR French /
FY Frisian / GA Irish / GD Scots Gaelic / GL Galician / GN Guarani / GU Gujarati / HA Hausa / HI Hindi / HR Croatian /
HU Hungarian / HY Armenian / IA Interlingua / IE Interlingue / IK Inupiak / IN Indonesian / IS Icelandic /
IT Italian / IW Hebrew / JA Japanese / JI Yiddish / JW Javanese / KA Georgian / KK Kazakh / KL Greenlandic /
KM Cambodian / KN Kannada / KO Korean / KS Kashmiri / KU Kurdish / KY Kirghiz / LA Latin / LN Lingala /
LO Laothian / LT Lithuanian / LV Latvian, Lettish / MG Malagasy / MI Maori / MK Macedonian / ML Malayalam /
MN Mongolian / MO Moldavian / MR Marathi / MS Malay / MT Maltese / MY Burmese / NA Nauru / NE Nepali / NL Dutch /
NO Norwegian / OC Occitan / OM Afan (Oromo) / OR Oriya / PA Panjabi / PL Polish / PS Pashto, Pushto / PT Portuguese/
QU Quechua / RM Rhaeto-Romance / RN Kirundi / RO Romanian / RU Russian / RW Kinyarwanda / SA Sanskrit /
SD Sindhi / SG Sangho / SH Serbo-Croatian / SI Singhalese / SK Slovak / SL Slovenian / SM Samoan / SN Shona /
SO Somali / SQ Albanian / SR Serbian / SS Siswat / ST Sesotho / SU Sundanese / SV Swedish / SW Swahili / TA Tamil /
TE Telugu / TG Tajik / TH Thai / TI Tigrinya / TK Turkmen / TL Tagalog / TN Setswana / TO Tonga / TR Turkish /
TS Tsonga / TT Tatar / TW Twi / UK Ukrainian / UR Urdu / UZ Uzbek / VI Vietnamese / VO Volapuk / WO Wolof /
XH Xhosa / YO Yoruba / ZH Chinese / ZU Zulu
About Output of Next Generation Audio Formats
HDMI
DIGITAL OUT
PCM
Next generation
audio formats
Maximum number of channels
PCM
Bitstream
7.1ch *4
5.1ch *4
7.1ch *4
7.1ch *4
5.1ch *4
7.1ch *4
—
Bitstream
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
—
Dolby TrueHD
7.1ch (48KHz/96KHz)
5.1ch (192KHz)
7.1ch *3
5.1ch *3
7.1ch *3
5.1ch *1/*3
5.1ch *1/*3
5.1ch *1/*3
7.1ch *3
5.1ch *3
2ch *2
2ch *2
2ch *2
2ch *2
2ch *2
2ch *2
2ch *2
2ch *2
Dolby Digital PLUS
7.1ch (48KHz)
DTS-HD Master Audio
7.1ch (48KHz/96KHz)
5.1ch (192KHz)
DTS-HD High Resolution Audio
LPCM
7.1ch (48KHz/96KHz)
7.1ch (48KHz/96KHz)
5.1ch (192KHz)
—
—
1
Core only
Down mixed
*
*
*
*
2
3
4
When SECONDARY AUDIO is set to “ON”, the audio is output as 48KHz.
When SECONDARY AUDIO is set to “ON”, the audio is output as PCM.
37
SETTINGS
6
7
Press c/d, select “YES”, and press
USB MEMORY MANAGEMENT
ENTER.
The following instructions explain how to delete
data such as the Virtual Package data copied
to a USB memory device.
YES
NO
CAUTION
• Do not remove the USB memory device or unplug
the AC cord while the erase is being performed.
1
Insert the USB memory device
into the BD STORAGE/SERVICE
terminal on rear of this player.
Start the process.
• The screen for the current operation will
display.
2
3
4
Press SETUP to display the SETUP
MENU screen.
Press a/b/c/d to select
“SETTINGS”, then press ENTER.
COMPLETE
OK
Press a/b to select “USB
MEMORY MANAGEMENT”, then
press ENTER.
8
Press ENTER.
AUDIO VIDEO SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY/LED
VERSION
USB MEMORY MANAGEMENT
SOFTWARE UPDATE
SYSTEM RESET
• “NO USB MEMORY!” appears when no USB
memory is inserted.
5
Press a/b, select “ERASE” or
“FORMAT”, then press ENTER.
ERASE: Deletes only BD-VIDEO data
contents.
FORMAT: Deletes all contents.
ERASE
ERASES BD-VIDEO DATA ON USB MEMORY.
FORMAT
ERASE ALL CONTENTS ON USB MEMORY
INCLUDING PROTECTED CONTENTS.
NOTE
• Data which has been saved to the player’s internal
memory (game score, etc.) will also be deleted.
38
SETTINGS
7
During the data checking,
“Checking” blinks.
SOFTWARE UPDATE
This function allows software updates by
inserting a USB memory device with the update
file into the BD STORAGE/SERVICE terminal on
this player.
NOW CHECKING THE DATA IN USB MEMORY DEVICE.
Regarding how to obtain the software
update file, please call 1-800-BE-SHARP.
CHECKING
CAUTION
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
• The current version of this unit software
and the version of the update file on the
USB memory device are displayed. To
update this player software with update
file, select “YES”, and press ENTER.
1
Insert the USB memory device
with the update file into the BD
STORAGE/SERVICE terminal on
rear of this player.
SOFTWARE UPDATE FILE IS DETECTED
IN THE USB MEMORY DEVICE.
START UPDATE?
2
3
4
Press SETUP to display the SETUP
MENU screen.
CURRENT VERSION
UPDATE VERSION
**1234567
**1234567
Press a/b/c/d to select
“SETTINGS”, then press ENTER.
YES
NO
Press a/b to select “SOFTWARE
UPDATE”, then ENTER.
• If you already set the password, go to
step 6.
• If the USB memory device is not
properly installed or the correct update
file cannot be found on the USB
memory device, an error message is
displayed.
Check the file on the USB memory
device, and then reinsert the USB
memory device correctly.
AUDIO VIDEO SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY/LED
VERSION
USB MEMORY MANAGEMENT
SOFTWARE UPDATE
SYSTEM RESET
SOFTWARE UPDATE FILE IS NOT DETECTED
IN THE USB MEMORY DEVICE.
CONFIRM THAT YOU HAVE TRANSFERRED THE FILE
TO THE USB MEMORY DEVICE AND RETRY SOFTWARE UPDATE.
OK
5
6
Enter the 4-digit number using 0-9.
THERE IS MORE THAN ONE SOFTWARE FILE
IN THE USB MEMORY DEVICE.
CONFIRM THAT ONLY THE SOFTWARE UPDATE FILE IS
IN THE USB MEMORY DEVICE.
ENTER 4-DIGIT PASSWORD
OK
Press ENTER to start checking data
in the USB memory device.
INSERT USB MEMORY DEVICE CONTAINING
THE SOFTWARE UPDATE FILE.
OK
39
SETTINGS
8
Press ENTER to start updating.
• The screen becomes dark for a
while until the update screen can be
displayed. Please wait for the update
screen to appear. Do not unplug the AC
cord.
THE PICTURE WILL TEMPORARILY GO DARK UNTIL
THE SOFTWARE UPDATE DISPLAY APPEARS.
WAIT SEVERAL MINUTES AND DO NOT UNPLUG THE AC CORD.
OK
NOW UPDATING
DO NOT UNPLUG AC CORD.
*
UPDATE VERSION
**1234567-2
30%
9
When the software is successfully
updated, a screen is displayed
indicating that the update process is
completed.
• If the update has failed, check the file
in the USB device and try Software
Update again.
10 Press POWER to turn off the player.
11 Remove the USB memory device.
40
Appendix
RS-232C port specifications
Parameter
Input the parameter values, aligning left, and fill with blank(s)
RS-232C port specifications
for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not within an adjustable range,
“ERR” returns. (Refer to “Response code format”.)
PC Control of this Player
• When a program is set, this Player can be controlled from
the PC using the RS-232C terminal.
The power can be turned on or off (standby) and automatic
programed playback is possible.
1
• Use an RS-232C cable cross-type (commercially available)
for the connections.
Response code format
Normal response
NOTE
• This operation system should be used by a person who is
accustomed to using PCs.
O
K
Return code (0DH)
Problem response (communication error or incorrect
command)
E
R
R
Return code (0DH)
After sending the return code (0DH), make sure to send line
feed (0AH) as well.
RS-232C serial control cable
(cross type)
RC-232C command list
Communication conditions
Set the RS-232C communications settings on the PC to
match this player’s communications conditions. This player’s
communications settings are as follows:
CONTROL ITEM
POWER ON
POWER OFF
PLAY
COMMAND
PARAMETER
P
P
D
D
D
D
O
O
P
S
F
W
W
L
R
R
Y
P
D
V
1
0
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Baud rate:
Data length:
Parity bit:
9,600 bps
8 bits
STOP
T
None
FWD
W
E
Stop bit:
1 bit
REV
R
Flow control:
None
Communication procedure
Send the control commands from the PC via the RS-232C
connector.
This Player operates according to the received command and
sends a response message to the PC.
Do not send multiple commands at the same time. Wait until
the PC receives the OK response before sending the next
command.
Make sure to send “A” with the carriage return and confirm
that “ERR” returns before operating.
Command format
Eight ASCII codes eCR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits
Parameter 4-digits
Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, blank
41
Troubleshooting
The following problems do not always suggest a defect or malfunction of this Player.
Refer to the problems and lists of possible solutions below before calling for service.
The Player power cannot be turned on.
Screen freezes and operation buttons do not
• Is the power cord firmly plugged into the AC outlet?
• When the power cord is plugged into an AC outlet, press
work.
• Press H STOP, then restart playback.
• Turn off the power and turn on the power again.
• If the power is not turned off, perform a reset. (Page 43)
• Is the disc damaged or dirty? Check the condition of the
disc. See page 10 for details about disc cleaning.
and hold POWER on the Player until “
”
appears on the front panel display. Then, after the
STANDBY indicator is lit, turn on the power. (Page 43)
• Press POWER after the STANDBY indicator turns on.
The disc is automatically ejected after closing the
disc tray.
The remote control does not work.
• Set the remote control and the Player to the same remote
control code. (Page 21)
• Use the remote control within its operating range.
• Replace the batteries.
• Make sure that the disc is loaded properly (aligned in disc
tray and label-side up).
• Take out the disc and clean it.
• Make sure that region code on the disc matches that of
this Player.
No sound, or sound is distorted.
• If the volume of the TV or amplifier is set to minimum, turn
the volume up.
• There is no sound during still mode, slow motion playback,
fast forward and fast reverse.
• DVD audio recorded in DTS is only output from the
DIGITAL AUDIO OUT terminal or jack. Connect a DTS
compatible digital amplifier or decoder to the DIGITAL
AUDIO OUT OPTICAL terminal or COAXIAL jack on this
Player.
• Make sure that the disc is playable.
No picture.
• Make sure that the cables are connected correctly.
• Make sure that the connected TV or the AV receiver is set
to the correct input.
• Take out the disc and clean it.
• Make sure that region code on the disc matches that of
this Player.
• There is no picture from the HDMI output.
− Are the settings performed correctly? Please check the
settings.
• There is no picture from the component video output.
− Are the settings performed correctly? Please check the
settings.
• Check that the audio cable is connected correctly.
• Check that the cable plugs are clean.
• Take out the disc and clean it.
• Audio may not be output depending on the audio recording
status, such as when audio other than an audio signal or
non-standard audio is recorded for the audio content of the
disc.
The Player cannot play a disc.
• Take out the disc and clean it.
• Make sure that the disc is loaded properly (aligned in disc
tray and label-side up).
• Make sure that region code on the disc matches that of
this Player.
• Allow any condensation in or near the Player to dry.
• Check that the disc is recorded in the compatible TV
system (PAL or NTSC).
• The Player cannot play back video which was not recorded
normally.
• Proper playback may be impossible due to the state of the
disc recording, a scratched, warped or dirty disc, the state
of the pick-up, or compatibility issues between this Player
and the disc being used.
The playback screen will be disturbed if DVD
video is recorded to a VCR, or played back
through a VCR.
• This Player complies with analog copy protection. Some
discs contain a copy prohibiting signal. If you try to play
back such discs through a VCR, or record to a VCR and
play back the signal, the copy protection will prevent
normal playback.
The TV operates incorrectly.
• Some TVs with wireless remote control capability may
operate incorrectly when using the remote control of this
Player. Use such TVs away from this Player.
There is just audio with no video.
• Is the connection cable for video output connected
properly?
• When the recorded time of a disc is unusually short,
playback may not be possible.
• BD-RE/R discs recorded in a format other than BDMV
cannot be played back.
Widescreen video appears vertically stretched, or
black bands appear at the top and bottom of the
screen.
• Is “TV ASPECT RATIO” set to match the connected TV?
(Page 35)
The settings have been erased.
• If the Player is unplugged (or there is a power failure) for
more than about 1 hour while its power is on, the settings
will be lost. Make sure that you turn off the Player before
unplugging the power cord.
• If you are using a widescreen TV, is the “TV ASPECT
RATIO” set to “WIDE”? (Page 35)
• When there is a power interruption or the power cord is
unplugged from the power outlet with the power on, all
settings return to the factory preset values.
Square noise (mosaic) appears on the screen.
• Blocks in images may be visible in scenes with rapid
movement due to the characteristics of digital image
compression technology.
The Player power is turned off.
• Is “AUTO POWER OFF” set to “YES”? When “AUTO
POWER OFF” is set to “YES”, the power will be
automatically turned off after 10 continuous minutes of
inactivity (no playback).
Video stops.
• Has the Player been subjected to shock or impact? Are
you using it in an unstable location? The Player will stop if it
senses shock or vibration.
Audio is not output, or images are not played
back properly.
• The audio may not be output or the images may not be
played back properly for some discs in which copyright-
protected contents are recorded.
42
Troubleshooting
Left and right channels of audio are reversed, or
sound comes out of only one side.
NOTE
Reset
• If this Player receives strong interference from a source such as
excessive static electricity, strong external noise, malfunction
of power supply, or voltage caused by lightning during use or a
wrong operation is sent to the Player, errors like the Player not
accepting an operation may occur. Press and hold POWER on the
• Are left and right audio cables connected to the opposite
terminal, or is one side disconnected?
Disc does not play back automatically.
• Have you set a disc that has an automatic playback
function?
Player until “
” appears on the front panel display when the
Player does not operate properly even after the power has been
turned off. Then, after the STANDBY indicator is lit, turn on the
power.
The Player heats up during use.
• When using this Player, the console cabinet may heat
up depending on the usage environment. This is not a
malfunction.
• When a reset is performed while the power is on, the Player will
turn off. Turn the power on again. At this point, it may take a few
moments for the system processing to finish before the Player is
ready for use. During the system processing, the BD and DVD/CD
mode indicators on the front panel display of the Player will blink.
Once the system processing has finished, the indicators will finish
blinking and then light up normally. You can operate the Player
when the BD and DVD/CD mode indicators are lit.
• Since all settings including the language setting stored in memory
are also reset when a reset has been performed, they must be set
again.
• When the problem persists even after performing a reset, unplug
the AC cord and plug it in again. If this does not solve the problem,
contact the nearest service center approved by SHARP.
The Player makes a snapping sound when
starting playback or loading a disc.
• The player may sometimes make a snapping sound when
starting playback if it has not been operated in a while.
These sounds are not malfunctions of the player but are
normal operating conditions.
Cannot operate the Player.
• Are you operating the Player within the specified operating
temperature range? (Page 46)
STANDBY indicator will remain lit.
• When the AC cord is removed from the outlet, the
STANDBY indicator will remain lit for a short period. This is
normal and is not a malfunction.
On-screen Error Messages
Messages Relating to BD and DVD
• The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the
operation is not correct.
Error message
Possible Error
Suggested Solution
CANNOT PLAY.
• The disc cannot be played back with this Player. • Check the disc, and load it correctly.
INCOMPATIBLE DISC.
• If you load a disc which cannot be played with
this Player (i.e. a scratched disc), or if you load a
disc upside down, this message will appear, and
the disc tray will automatically pop out.
• Occurs if the loaded disc cannot be played
because it is a non-standard disc or scratched,
etc.
• Remove the disc.
CANNOT OPERATE.
• Occurs if an operation is incorrect.
• Occurs if there is a formatting error.
THIS USB MEMORY IS NOT
FORMATTED PROPERLY. PLEASE
FORMAT THE MEMORY IN USB
MEMORY MANAGEMENT.
• Format the USB memory again.
THE CONNECTED USB MEMORY
CANNOT BE USED. IT SHOULD BE
COMPLIANT WITH USB2.0.
• Occurs if USB memory not compliant with USB
2.0 is used (i.e. USB 1.0/USB 1.1).
• Connect USB 2.0-compliant USB memory.
43
Glossary
BD-J application
DTS
The BD-ROM format supports Java for interactive functions.
“BD-J” offers content providers almost unlimited functionality
when creating interactive BD-ROM titles.
This is a digital sound system developed by DTS, Inc. for use
in cinemas. This system uses 6 audio channels and provides
accurate sound field positioning and realistic acoustics. (By
connecting a DTS Digital Surround decoder, you can also
listen to DTS Digital Surround sound.)
BDMV (page 7)
BDMV (Blu-ray Disc Movie, BD-MV) refers to one of the
application formats used for BD-ROM which is one of the
Blu-ray Disc specifications. BDMV is a recording format
equivalent to DVD-video of the DVD specification.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a new technology
developed for the next generation high definition optical disc
format.
BD-R (page 7)
DTS-HD Master Audio
DTS-HD Master Audio is a lossless audio compression
technology developed for the next generation high definition
optical disc format.
A BD-R (Blu-ray Disc Recordable) is a recordable, write-once
Blu-ray Disc. Since contents can be recorded and cannot
be overwritten, a BD-R can be used to archive data or for
storing and distributing video material.
DVD video (pages 7, 24)
BD-RE (page 7)
A disc format that contains up to eight hours of moving
pictures on a disc the same diameter as a CD. A single-layer
single sided DVD holds up to 4.7 GB; a double layer single-
sided DVD, 8.5 GB; a single layer double-sided DVD, 9.4
GB; double-layer double-sided DVD, 17 GB. The MPEG 2
format was adopted for efficient video data compression. It is
a variable rate technology that encodes the data to according
to the status of the video for reproducing high-quality images.
Audio information is recorded in a multi-channel format such
as Dolby Digital, allowing for a realistic audio presence.
A BD-RE (Blu-ray Disc Rewritable) is a recordable and
rewritable Blu-ray Disc.
BD-ROM
BD-ROMs (Blu-ray Disc Read-Only Memory) are
commercially produced discs. Other than conventional movie
and video contents, these discs have enhanced features
such as interactive content, menu operations using pop-
up menus, selection of subtitle display, and slide shows.
Although a BD-ROM may contain any form of data, most
BD-ROM discs will contain movies in High Definition format
for playback on Blu-ray Disc players.
DVD+/-R (pages 7, 26)
A DVD+/-R is a recordable, write-once DVD. Since contents
can be recorded and cannot be overwritten, a DVD+/-R
can be used to archive data or for storing and distributing
video material. The DVD+/-R has two different formats: VR
format and Video format. DVDs created in Video format have
the same format as a DVD video, while discs created in VR
(Video Recording) format allow the contents to be programed
or edited.
Blu-ray Disc (BD) (page 7)
A disc format developed for recording/playing high-definition
(HD) video (for HDTV, etc.), and for storing large amounts of
data. A single layer Blu-ray Disc holds up to 25 GB, and a
dual-layer Blu-ray Disc holds up to 50 GB of data.
Chapter number (pages 32, 33)
Sections of a movie or a music feature that are smaller than
titles. A title is composed of several chapters. Some discs
may only be comprised of a single chapter.
DVD+/-RW (pages 7, 26)
A DVD+/-RW is a recordable and rewritable DVD. The re-
recordable feature makes editing possible. The DVD+/-RW
has two different formats: VR format and Video format. DVDs
created in Video format have the same format as a DVD
video, while discs created in VR (Video Recording) format
allow the contents to be programed or edited.
Copy guard
This function prevents copying. You cannot copy discs
marked by the copyright holder with a signal which prevents
copying.
HDMI (page 15)
Disc menu (page 25)
HDMI (High-Definition Multimedia Interface) is an interface
that supports both video and audio on a single digital
connection. The HDMI connection carries standard to high
definition video signals and multi-channel audio signals to
AV components such as HDMI equipped TVs, in digital form
without degradation.
This lets you select things like the subtitle language or audio
format using a menu stored on the BD/DVD video disc.
Dolby Digital
A sound system developed by Dolby Laboratories Inc. that
gives movie theater ambience to audio output when the
product is connected to a Dolby Digital processor or amplifier.
Interlace format
Interlace format shows every other line of an image as a
single “field” and is the standard method for displaying
images on television. The even numbered field shows the
even numbered lines of an image, and the odd numbered
field shows the odd numbered lines of an image.
Dolby Digital Plus
A sound system developed as an extension to Dolby Digital.
This audio coding technology supports 7.1 multi-channel
surround sound.
Dolby TrueHD
JPEG (pages 7, 8, 31)
Dolby TrueHD is a lossless coding technology that supports
up to 8 channels of multi-channel surround sound for the
next generation optical discs. The reproduced sound is true
to the original source bit-for-bit.
JPEG (Joint Photographic Experts Group) is a still image data
compression format and is used in most of digital cameras.
Letter Box (LB 4:3) (page 35)
A screen size with black bars on the top and bottom of the
image to allow viewing of wide-screen (16:9) material on a
connected 4:3 TV.
44
Glossary
Linear PCM Sound
Resume playback (page 24)
If you stop playback while it is in progress, the Player stores
the stop position in memory, and this function lets you
playback from that point.
Linear PCM is a signal recording format used for Audio CDs
and on some DVD and Blu-ray discs. The sound on Audio
CDs is recorded at 44.1 kHz with 16 bits. (Sound is recorded
between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD
video discs and between 48 kHz with 16 bits and 192 kHz
with 24 bits on BD video discs.)
Skip (page 28)
This returns to the start of the chapter (or track) being played,
or skips to the next chapter (or track).
MPEG-2
Subtitles (pages 29, 32, 33)
These are the lines of text appearing at the bottom of the
screen which translate or transcribe the dialog. They are
recorded on many DVD and BD video discs.
MPEG-2 (Moving Picture Experts Group phase 2) is one of
the video data compression schemes, which is adopted for
DVD videos and digital broadcasts worldwide. Some Blu-ray
Discs also use high bitrate MPEG-2.
Multi Angle (pages 30, 32)
Time number
This indicates the play time which has elapsed from the start
of a disc or a title. It can be used to find a specific scene
quickly. (It may not work with some discs.)
This is a feature of DVD and BD video discs. In some discs,
the same scene is shot from different angles, and these are
stored in a single disc so you can enjoy playback from each
angle. (This function can be enjoyed if the disc is recorded
with multiple angles.)
Title number (pages 32, 33)
These numbers are recorded on DVD and Blu-ray discs.
When a disc contains two or more movies, these movies are
numbered as title 1, title 2, etc.
Multi Audio
This is a feature of DVD and BD video discs. This function
makes it possible to record different audio tracks for the
same video, so you can enhance your enjoyment by
switching the audio. (You can enjoy this function with discs
recorded with multiple audio tracks.)
Top menu (page 24)
In a BD/DVD video, this is the menu for selecting things like
the chapter to be played back and the subtitle language. In
some DVD videos, the top menu may be called the “Title
Menu”.
Pan Scan (PS 4:3) (page 35)
A screen size that cuts off the sides of the image to allow
viewing of wide-screen (16:9) material on a connected 4:3 TV.
Track number
These numbers are assigned to the tracks which are
recorded on audio CDs. They enable specific tracks to be
located quickly.
Parental control (page 36)
In some digital broadcasts and BD/DVD video discs, a
control level for disc viewing is set depending on the age of
the viewer. With this Player, you can set the control level for
viewing such broadcasts and discs.
x.v.Color
x.v.Color reproduces a greater range of color than before,
showing almost all of the colors that the human eye can
detect.
Pop-up menu (page 25)
An enhanced menu operation available on BD video discs.
The pop-up menu appears when POP-UP MENU is pressed
during playback, and can be operated while playback is in
progress.
Progressive format
Compared to the Interlace format that alternately shows
every other line of an image (field) to create one frame, the
Progressive format shows the entire image at once as a
single frame. This means that while the Interlace format can
show 30 frames/60 fields in one second, the Progressive
format can show 60 frames in one second. The overall
picture quality increases and still images, text, and horizontal
lines appear sharper.
Region code (page 7)
Code identifying a geographic region of compatibility for a
BD/DVD.
Remote control code (page 21)
This is the type of the remote control signal for operating
the Player. There are three types of remote control signals:
“Remote Control No. 1” (RC-1), “Remote Control No. 2” (RC-
2) and “Remote Control No. 3” (RC-3).
45
Specifications
General
Power supply
AC 120V, 60Hz
Power consumption (Normal)
Power consumption (Standby)
Dimensions
24 W
0.5 W (When “QUICK START” is set to “NO”)
Approx. 17 1/8 g 2 11 16 g 13 3/4 inch (W g H g D)
/
Approx. 434 mm g 68 mm g 349 mm (W g H g D)
Weight
Approx. 9.5 lbs. (4.3 kg)
Operating temperature
Storage temperature
Operating humidity
TV systems
41°F to 95°F (5°C to 35°C)
–4°F to 131°F (–20°C to 55°C)
10 % to 80 % (no condensation)
NTSC system
Playback
Playable discs
BD-ROM, BD-RE Dual Layer (BDMV format), BD-R Dual Layer (BDMV format),
DVD Video, DVD+RW/+R/-RW/-R Dual Layer (Video/VR format),
Audio CD (CD-DA), CD-RW/R (CD-DA, JPEG file format)
Input/Output
HDMI
HDMI 19-pin standard connector (1080p 24Hz output)
HDMI (V.1.3 with x.v.Color, Dolby TrueHD, DTS-HD Advanced Digital Out )
Component video output
Output level:
Y: 1 Vp-p (75 ohms)
PB/CB, PR/CR: 0.7 Vp-p (75 ohms)
Jacks: RCA jack
S-Video output
Video output
Y-Output level: 1 Vp-p (75 ohms)
C-Output level: 0.286 Vp-p (75 ohms)
Jack: 4 pin mini DIN
Output level: 1 Vp-p (75 ohms)
Jack: RCA-pin jack
Digital audio optical output
Digital audio coaxial output
Audio output
Terminal: Square Optical terminal
Jack: RCA jack
Output level: 2 V rms (Output impedance: 1K ohms)
Jacks: RCA jack
USB input
RS-232C
IR input
USB 2.0 correspondence (for Local storage/Software update)
D-sub 9-pin connector
Jack: Stereo mini jack
Specifications are subject to change without notice.
46
CONSUMER LIMITED WARRANTY
(Valid for warranty service in the U.S. and PUERTO RICO only)
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that
it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to
the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation
or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commer-
cial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by
consumers in their home or residence.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and
provide proof of purchase to the servicer.
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warran-
ties, express or implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE
EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLI-
CABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF
SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclu-
sive remedy available to the purchaser and only for the time periods set forth herein. No other representations or prom-
ises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein,
shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or other-
wise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject
to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, altera-
tion, modification, tampering, improper operation or maintenance or any damages or defects in the Product which were
caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be
liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not
allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not
apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA. AND
PUERTO RICO
Model Specific Section
BD-HP50U BLU-RAY DISC PLAYER
(Be sure to have this information available when you need
service for your Product.)
Your Product Model Number & Description:
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United
States. To find the location of the nearest Sharp Authorized
Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Please transport the Product in its original packaging and
ensure that the Product is covered to avoid scratches and
damage. Sharp shall not be responsible for lost, stolen or
misdirected mail or for damage to the product incurred
during shipping.
47
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Malaysia
Imprimé en Malaisie
Impreso en Malasia
TINS-D547WJQZ
08P07-MA-NG
|