ECD-T1545
SIRIUS SATELLITE RADIO OPERATING MANUAL
OPEN
LOU/ENT/ENT
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
DSP
MON
MUT
LOC
MODE SW
1
PAU
2
SCN
3
RPT
4
SHF
5
DISC
6
DISC
Fold Down Panel Detachable
High Power FM/AM Stereo Receiver
Compact Disc Player/MP3 Player/With ESP
ISO Mounting with Removable Trim Ring
Sirius Function
Remote Control
CD-R/RW Compatibility
(English)
SIRIUS OPERATION……………. 2~3
1
SIRIUS MODE SELECTION .........….............…….…..(5)
Press LOC/S-MODE button (5) to switch Category mode, Skip mode or normal. It is used as the
selection of each:
Normal
Category mode
Direct Tune
Skip Channel mode
When Category mode or Skip mode is engaged, the “CATEGORY” or “SKIP” function is turned
on in the display. When Category mode or Skip mode is released, the “CATEGORY” or “SKIP”
function is turned off. When Direct mode is engaged, “DIRECT” of alphanumeric display is turned
on.
Select Category and TUNE UP/DOWN within selected Category
Use CAT-DIR button (7) or CAT-DIR
button (6) to select desire Category and press
BAND/LOU/ENT button (2).
In Category mode, stations can be tuned within the same category.
-
-
-
When the user wishes to search by Category, press LOC/S-MOD button (5) can be pressed
until it goes into Category search mode.
Press CAT/DIR
button (7) or CAT/DIR
button (6) up and down to get to the desired
category.
To change channels, press LOC/S-MODE button (5) again to Normal mode, and then press
MANU/SKIP/CH or button (3) to select the channel up or down.
The operation of skip channel function
In Skip mode, pressing LOC/S-MODE button (5) for more than 3 seconds sets the SKIP channel
mode. Details for set or release skip channel as follows.
Use MANU/SKIP/CH
or
button (3) to be switched SKIP channel set or release mode
sequentially.
-
-
Press BAND/LOU/ENT button (2) to select skip or release the following channel. (If the
channel was skipped, the “SKIP” icon will be displayed.
Press LOC/S-MODE button (5) for more than 3 seconds again to return to basic mode
automatically after 10 seconds.
Note:
In skip mode, use MANU/SKIP/CH
How to direct tune
or
button (3) to show skipped channels.
1. In direct mode, display shows DIRECT and “000” channel number. (Hundred Digit flashing
on/off)
2. Use MANU/SKIP/CH
or
button (3) to select hundred digit.
3. Press LOC/S-MOD button (5) again to confirm entry of the hundred digit and the 10s digit is
flashing on/off.
4. Use MANU/SKIP/CH
or
button (3) to select 10s digit.
5. Press LOC/S-MODE button (5) again to confirm entry of the 10s digit and the 1s digit is
flashing on/off.
6. Press LOC/S-MODE button (5) again to confirm entry of the 1s digit.
7. Press BAND/LOU/ENT button (2) to direct tune.
3
ECD-T1545
OPEN
LOU/ENT/ENT
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
DSP
MON
MUT
LOC
MODE SW
1
PAU
2
SCN
3
RPT
4
SHF
5
DISC
6
DISC
Fold Down Panel Detachable
High Power FM/AM Stereo Receiver
Compact Disc Player/MP3 Player/With ESP
ISO Mounting with Removable Trim Ring
Sirius Function (see separate booklet on Sirius Radio operation)
Remote Control
CD-R/RW Compatibility
(English)
OPERATING INSTRUCTIONS……………. 2~28
1
CONTENTS
COMPACT DISC CARE ...........................................................................................................3
DIGITAL DISPLAY .....................................................................................................................4
DETACHABLE FRONT PANEL.................................................................................................5
GENERAL OPERATION............................................................................................................6
RADIO OPERATION..................................................................................................................8
CD OPERATION........................................................................................................................10
CDC OPERATION .....................................................................................................................12
MP3 OPERATION......................................................................................................................14
MIXED-CD OPERATION ...........................................................................................................17
AUX MODE OPERATION..........................................................................................................18
REMOTE CONTROL .................................................................................................................19
ERROR SIGNS ..........................................................................................................................20
HINTS FOR PROPER AND SAFE OPERATION ......................................................................21
TROUBLE SHOOTING ..............................................................................................................22
ACCESSORIES AND HARDWARE...........................................................................................23
INSTALLATION..........................................................................................................................23
UNIT REMOVAL ........................................................................................................................24
ELECTRICAL CONNECTIONS .................................................................................................25
LINE OUT CONNECTIONS.......................................................................................................27
AUXILIARY INPUT CONNECTIONS.........................................................................................27
CAUTION
•
•
This unit is designed to operate on 12 volts DC, NEGATIVE ground electrical systems only.
When fuse replacement is necessary, use only a 15 amp fuse. Do not replace with a higher
rated fuse. If the fuse blows often, carefully check all electrical connections for any short
circuits and have your car’s voltage regulator checked also.
• Do not install the unit where it will be exposed to direct sunlight or hot air discharged from the
car heater.
•
•
•
Do not expose the unit to water or moisture.
To avoid damaging the unit, never insert anything other than a compact disc into the disc slot.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
If servicing is required, return the unit to an authorized SANYO mobile audio dealer.
Use the Controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
•
• Changes or modifications not expressly approved by SANYO may void the user’s authority to
operate this equipment.
2
COMPACT DISC CARE
Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping
some tracks during play.
• This unit has been designed to play compact
discs bearing the identification logo shown on
the left. No other discs can be played.
• Do not use non-conventional discs such as
heart- shaped, octagonal discs, etc.
The player could be damaged.
• Fingerprints and dust should be carefully
wiped off the signal surface of the disc
(glossy side) with a soft cloth.
Wipe in a straight motion from the inside to
the outside of the disc. Unlike conventional
records, the compact disc has no grooves to
collect dust and debris. Small dust particles
will have no effect on reproduction quality.
• Do not insert a disc which is cracked into the
unit.
• Do not apply paper or write anything on the
surface of the disc.
• To prevent warping the disc, do not expose
it to direct sunlight, high humidity or high
temperatures for extended periods of time.
• Never use chemicals such as record cleaning
sprays, antistatic sprays or fluids, benzene
or thinner to clean compact discs.
These chemicals will permanently damage
the plastic surface of the disc.
• When not using the disc player for extended
periods of time, remove the compact disc and
return it to the plastic storage case. This will
protect the disc from dust and exposure to
the sun.
Recommended CD-R/RW Media
Data may not be properly written to CD-R/RW media depending on the quality of the media.
If this happens, the data may not be reproduced correctly. We recommend the following
manufacturers to insure proper quality of the media.
CD-R Media
TDK USA Corp., Taiyo Yuden (U.S.A.), Inc., Ricoh Corporation, Eastman Kodak Company,
Maxell Corporation of America, Mitsubishi Chemical Corporation, Fuji Photo Film U.S.A.,
Inc., Mitsui Chemicals, Inc., Sony Corporation of America, Philips Electronics North
America Corporation, Imation Corp.
CD-RW Media
TDK USA Corp., Ricoh Corporation, Mitsubishi Chemical Corporation.
Additionally, CD-R media compatible with various speeds such as 2X and 1X-4X are
available. Please refer to the instruction manuals of the drive and the recording software
you are using to selection of the correct media.
3
DIGITAL DISPLAY
Radio Frequency, Time, CD
Track Number, Audio Control
Selected Mode
CD-IN indicator
Stereo
Local
SAT
Channel name
indicator
Category
Mono
CLASSIC
Skip
SAT
Artist
Loud
POP
Channel name
ROCK
Subwoofer
Song title
4
DETACHABLE FRONT PANEL
The front panel is designed to be removable for antitheft purposes.
It is recommended that you remove and carry the front panel with you when you leave your car.
HOW TO DETACH THE FRONT PANEL
Press the release button (OPEN) to fold down the front panel.
To remove the front panel, lift it up at a little angle from horizontal position, then first pull out the
right side and then pull out the left side.
OPEN
The right side
Front Panel
HOW TO ATTACH THE FRONT PANEL
To install the front panel, first insert the left side into proper position then insert the right side into
place.
When the two sides are fixed into place, push the front panel into main unit.
The left side
The right side
Front Panel
RETURNING TO THE INITIAL SETTINGS
When the front panel is detached, you can find the RESET
Reset Button
button on the front side of the unit. Press the button, the
Microcomputer of the unit returns to the initial settings. If
the display window is not properly shown or the unit
malfunctions, press the RESET button.
Note
The unit will not operate if panel is installed incorrectly.
CAUTION
• Do not attempt to remove the panel in a manner other than that described above.
• When installing the panel, do not force it into the unit.
• Do not touch the connection terminals of the panel or the unit. It may cause poor contact.
• Use a clean, dry cloth when cleaning the terminals.
• Keep the panel out of direct sunlight and high temperatures.
• Prevent the panel from coming into contact with benzene, thinner, or insecticides.
• Do not drop the panel.
5
GENERAL OPERATION
3
2
6
8
LOU/ENT/ENT
OPEN
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
MON
MUT
DSP
LOC
MODE SW
1
PAU
2
SCN
3
RPT
4
SHF
5
DISC
6
DISC
7 1
5
10
4
9
TURNING THE POWER ON........................Any button
Install the front panel and press any button (except
OPEN button) when ACC is on.
TURNING THE POWER OFF ...............................….. (1)
When system is on, press the
button (1) to turn off the unit.
VOLUME LEVEL CONTROL.......................................(2)
Rotate the VOLUME dial (2) to adjust the volume level.
ADJUSTING THE SOUND
CHARACTERISTICS ..................................…..... .(2), (3)
Press the SEL button (3) shortly:
1. Each time you press the SEL button (3) shortly, the item changes as follows;
VOL
BAS
TRB
BAL
FAD
(Volume) (Bass)
(Treble) (Balance) (Fader)
2. Rotate the VOLUME dial (2) to adjust the selected item. Make the adjustment within 5
seconds after selecting. After 5 seconds, the display window will revert to display priority.
Adjustment Range
BASS (BAS 00)
BAS –10
TRB –10
10L
BAS 10
TRB 10
10R
TREBLE (TRB 00)
BALANCE (BAL L=R)
FADER (FAD F=R)
10F
10R
Beep Sound Adjustment:
Press and hold the SEL button (3) for several seconds to enter beep sound adjustment mode,
then rotate the VOLUME dial (2) clockwise or counter-clockwise to select as follows:
BEEP 2ND
BEEP ALL
BEEP OFF
-
BEEP 2ND mode:
The beep is only generated when all allowed double function button is pressed for several
seconds.
6
e.g.
When preset button is pressed.
When BAND/LOU/ENT button is pressed.
When AS/PS/P.SCAN/MP3 button is pressed.
BEEP ALL mode:
-
-
The beep is generated when every button is pressed.
BEEP OFF mode:
The beep is disabled.
MODE SELECTION...................................……..…....(4)
Press MODE/SW button (4) to choose desired listening mode. (e.g. radio mode to SIRIUS mode
to CD (MP3) mode to CDC (or AUX) mode)
SUBWOOFER FUNCTION...........................…...…....(4)
Press MODE/SW button (4) for several seconds to toggle sub-woofer output. Press it for several
seconds again to release this mode.
DISPLAY INFORMATION..................………………....(5)
When pressed quickly, the DSP button (5) changes the display as follows.
-
-
-
-
In AM/FM mode:
-> Frequency ->CLOCK ->
In Sirius mode:
-> Channel Name -> Category Name -> Artist Name -> Song Title -> CLOCK ->
In CD mode:
-> CD ->CLOCK ->
In CDC (or AUX) mode:
-> CDC (or AUX) ->CLOCK ->
Each display time is 5 seconds, the display will return to the first position after 5 seconds.
SET THE CLOCK…………….................….......(5),(8),(9)
Press the DSP button (5) to show the clock on the LCD display. Then hold the button until the
clock flashes. During this mode, press the MANU/SKIP/CH
MANU/SKIP/CH button (9) to change minutes.
button (8) to change hours or
LOUDNESS EFFECT...................................……..…..(6)
Press BAND/LOU/ENT button (6) for several seconds to reinforce the bass output. Press it for
several seconds again to release this function.
EQUALIZATION......................……............…………..(7)
Press EQ button (7) to turn on equalization function and to select desired audio mode. There are
five kinds of modes as below:
FLAT
CLASSICS
POP M
ROCK M
DSP OFF
MUTE FUNCTION...................................……..….…(10)
Press MUT button (10) to mute down the sound instantly. If any button is pressed in the mute
state, the mute state is released.
ESP FUNCTION
The unit has the electronic shockproof function. It can be shockproof for more than 20 seconds.
7
RADIO OPERATION
2
3
LOU/ENT/ENT
OPEN
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
DSP
MON
MUT
LOC
MODE SW
1
PAU
2
SCN
3
RPT
4
SHF
5
DISC
6
DISC
1
4
5
7
6
SWITCHING TO RADIO MODE…………………….…(1)
Press MODE/SW button (1) to select radio mode, the radio mode appears in the display together
with the memory band and frequency.
SELECTING THE FREQUENCY BAND……………..(2)
At radio mode, press BAND/LOU/ENT button (2) quickly to select the desired band.
The band will change in the following order:
FM1
FM2
FM3
AM
RADIO TUNING…………………………………………(3)
Press the MANU/SKIP/CH
or
button (3) shortly to activate automatic seek function.
Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is
selected. If both buttons have not been pressed for several seconds, they will return to seek
tuning mode and “AUTO” appears on the display.
AUTOMATIC MEMORY
STORING & PROGRAM SCANNING……………..…(4)
-
Automatic memory storing
Press AS/PS/P.SCAN/MP3 button (4) for several seconds, the radio searches for the six
strongest stations and stores them into the presets of the currently selected band. While
searching, ”LOC” appears on the display.
-
Program scanning
Press AS/PS/P.SCAN/MP3 button (4) shortly to scan preset station in memory.
STORING PRESET STATIONS .................................(5)
The preset buttons (5) can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and AM)
for convenient access to your favorite stations.
•
Programming stations ..... 1. Select the desired band, then tune in the station you want to
store in memory.
2. Press and hold one of the preset buttons (5) for more than 2
seconds until the corresponding preset button number appears.
Repeat steps 1. and 2. to program additional stations.
•
Quick tuning .................... Select the desired band, then press one of the six preset buttons (5).
8
LOCAL/DISTANT SELECTION ...........................…..(6)
Press LOC/S-MODE button (6) to set local or distant stations.
Use local position (LOC appears on the display) for reception of strong station, and distant
position (DX appears on the display) for reception of weaker stations. This function is effective
during AUTO SEEK operation.
MONO/STEREO.......................……………………….(7)
Press MON button (7) to select mono or stereo mode. You can sometimes improve reception of
distant stations by selecting mono operation.
9
CD OPERATION
3
OPEN
LOU/ENT/ENT
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
DSP
MON
MUT
LOC
4
SHF
5
DISC
MODE SW
1
PAU
2
SCN
3
RPT
6
DISC
4
6
2
8
5
7
1
LOADING AND EJECTING THE CD……………....(1),(8)
Press OPEN button to fold down the front panel, then insert a disc into the CD slot (1) and the
CD player will start.
Press the eject button (8) to eject a disc.
SWITCHING TO CD MODE............................…..........(2)
Press the MODE/SW button (2) with the power on to switch from radio mode or Sirius mode or
CDC (or AUX) mode to CD mode.
When the entire disc has played, the unit returns to the first track and play resumes.
SKIPPING TRACKS ...............................................…(3)
Press the MANU/SKIP/CH
button to skip to the beginning of the next track.
Press the MANU/SKIP/CH
button to skip to the beginning of the previous track.
Press and hold the MANU/SKIP/CH
or MANU/SKIP/CH
button (3) for several
seconds to search quickly (with sound) in the forward or reverse direction.
When the button is released, the CD resumes normal play.
Notes:
•
•
Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the
condition of the disc) may not play on this unit.
You cannot play CD-R/CD-RW that is not finalized. (A finalize process necessary for a
recorded CD-R disc to be played on the audio CD player.)
10
PLACING THE CD IN PAUSE MODE ........................ (4)
While playing a CD, press the PAU button (4).
To resume playing, press the PAU button (4) again.
Notes
•
•
During playback of a CD, the CD running indicator
spins.
The unit will turn-on automatically when a CD is inserted if the ignition switch is “ON”.
SCAN MODE (PLAYING THE BEGINNING
OF EACH TRACK) ...................................................... (5)
This function plays the first several seconds of each track sequentially.
Press the SCN button (5) to begin the scan mode.
To cancel this mode, press the SCN button (5) again.
REPEAT MODE ........................................................... (6)
Press the RPT button (6) to play the current track repeatedly.
To cancel this mode, press the RPT button (6) again.
SHUFFLE MODE.......................................................... (7)
This function plays the tracks on a CD in random order.
Press the SHF button (7) to begin shuffle play.
To cancel this mode, press the SHF button (7) again.
11
CD CHANGER OPERATION
2
OPEN
LOU/ENT/ENT
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
DSP
MON
MUT
LOC
4
SHF
5
DISC
MODE SW
1
PAU
2
SCN
3
RPT
6
DISC
3
5
7
1
4
6
8
SWITCHING TO CD CHANGER (CDC) MODE..........(1)
Press the MODE/SW button (1) with the power on to select CDC mode.
When the CDC mode is switched on, playback begins with the first CD that the CD changer
detects. (Note: Unit will only go to CDC mode if the SANYO CD changer is connected.)
SKIPPING TRACKS ...............................................…(2)
Press the MANU/SKIP/CH
to skip to the beginning of the next track.
Press the MANU/SKIP/CH
button to skip to the beginning of the previous track.
Press and hold the MANU/SKIP/CH
or MANU/SKIP/CH
button (2) for several
seconds to search quickly (with sound) in the forward or reverse direction.
When the button is released, the CD resumes normal play.
PLACING THE CD IN PAUSE MODE ....................... (3)
While playing a CD, press the PAU button (3).
To resume playing, press the PAU button (3) again.
SCAN MODE (PLAYING THE BEGINNING
OF TRACKS OR DISCS) ........................................... (4)
This function plays the first several seconds of each track or disc sequentially.
•
Playing the beginning of tracks (Track Scan)
Press the SCN button (4) to play the first several seconds of each track on the current disc in
order.
•
Playing the beginning of disc (Disc Scan)
Press and hold the SCN button (4) for several seconds to play the first several seconds of
each disc in the magazine.
To cancel the track scan or disc scan mode, press SCN button (4) again.
REPEAT MODE .......................................................... (5)
•
Repeat tracks
Press the RPT button (5) to play the current track repeatedly.
Repeat discs
•
Press and hold the RPT button (5) for several seconds to play the current disc repeatedly.
To cancel the track repeat or disc repeat mode, press the RPT button (5) again.
12
SHUFFLE MODE......................................................... (6)
This function plays the tracks on one CD or all CDs in the magazine in random order.
•
“Shuffle-playing” tracks
Press the SHF button (6) to play the current disc in random order.
“Shuffle-playing” discs
•
Press and hold the SHF button (6) for several seconds. The system selects a disc at random
and plays all tracks on that disc. When all tracks have been played, the next disc is selected
and “Shuffle-playing” is repeated.
To cancel the track shuffle or disc shuffle mode, press the SHF button (6) again.
SELECTING A DISC.............................................. (7),(8)
Press the CD- button (7) to select the preceding disc.
Press the CD+ button (8) to select the next disc.
Note
•
Use with only SANYO CD Changer.
13
MP3 OPERATION
15
4
5
10
LOU/ENT/ENT
OPEN
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
DSP
MON
MUT
LOC
MODE SW
1
PAU
2
SCN
3
RPT
4
SHF
5
DISC
6
DISC
9
11
13
7
2
8
3
12
14
6
1
LOADING AND EJECTING THE MP3-CD……………....(1),(8)
Press OPEN button to fold down the front panel, then insert a disc into the disc slot (1) and the
player will start.
Press the eject button (8) to stop MP3 function and eject the disc from disc slot (1).
SWITCHING TO CD (MP3) MODE.......................…......(2)
Press the MODE/SW button (2) with the power on to switch from radio mode or AUX mode to CD
(MP3) mode.
When the CD (MP3) mode is switched on while a disc is loaded, play resumes from the point at
which play was stopped.
When the entire disc has played, the unit returns to the first track and play resumes.
SELECTING SONG.............…..(3),(4),(5),(6),(7),(10),(15)
ꢀ
Single step selection:
Press MANU/SKIP/CH
or MANU/SKIP/CH
button (10) to advance or reverse
the previous song in single step.
ꢀ
ꢀ
Select by directory up/down buttons:
Press CAT-DIR button (6) or CAT-DIR button (7) to select directory upward or downward.
Select by AS/PS/MP3 button:
When pressed AS/PS/MP3 button (3), the MP3 search mode is activated.
“Searching track directly” => “Searching Directory or File Name”=> searching from root by
VOLUME A-Z/0-9 dial (4) =>searching from current directory by VOLUME A-Z/0-9 dial (4).
14
ꢁ
SEARCHING TRACK DIRECTLY...................………….…(3),(4),(5)
Press the AS/PS/MP3 button (3) one time to enter into “Searching track directly” mode.
Set desired track by rotating VOLUME A-Z/0-9 dial (4), and then press
BAND/LOU/ENT button (5) shortly.
Note:
The unit searches the track after few seconds, even if the BAND/LOU/ENT button (5) is
not pressed.
ꢁ
SEARCHING DIRECTORY OR FILE NAME.......…...(3),(4),(5),(15)
Press the AS/PS/MP3 button (3) two times. It enters into “Searching Directory or File
Name” mode. The unit searches files and directories by name which is entered by the
user with the VOLUME A-Z /0-9 dial (4).
-
Use rotary encoder VOLUME A-Z/0-9 dial (4) to select the characters A to Z, blank, 0 to 9,
_, -, +.
-
-
Press SEL button (15) to confirm entry of each characters.
Press BAND/LOU/ENT button (5) to start the title search.
In case the selected title is a directory name, display will show (‘ ‘), then
-
Use rotary encoder VOLUME A-Z/0-9 dial (4) to list all songs under this
directory and select the title.
-
-
Press BAND/LOU/ENT button (5) to confirm and start the play.
Repeat the above steps if the newly selected title is again a directory.
ꢁ
SEARCHING FROM ROOT DIRECTORY......….………(3),(4),(5)
Press the AS/PS/MP3 button (3) three times, the unit searches file or directory from root
directory by VOLUME A-Z/0-9 dial (4). (D-DIR icon turns on if the name is a directory).
Display will list all available directories and songs. Select the desired directory/songs by
using rotary encoder VOLUME A-Z/0-9 dial (4) and BAND/LOU/ENT button (5) to
confirm.
If the selected title is a song, it starts to play.
If the selected title is a directory name, display will show (‘ ‘), then
-
Use rotary encoder VOLUME A-Z/0-9 dial (4) to list all songs under this
directory and select the title.
-
-
Press BAND/LOU/ENT button (5) to confirm and start the play.
Repeat the above steps if the newly selected title is again a directory.
ꢁ
SEARCHING FROM CURRENT DIRECTORY.………..(3),(4),(5)
Press the AS/PS/MP3 button (3) four times, the unit searches file or directory from
current directory by VOLUME A-Z/0-9 dial (4). (D-DIR icon turns on if the name is
directory). The current directory name is displayed for a second and the currently
playing file name is displayed. The user can select the directory or file in the directory by
VOLUME A-Z/0-9 dial (4). The selected file can be played by pressing BAND/LOU/ENT
button (5).
Note:
“MP3” icon turns on when MP3 disc is played and blinks when it is in search mode.
PAUSE.................……………………………………...(11)
Press PAU button (11) to pause MP3 player. Press it again to resume play.
15
REPEAT THE SAME SONG...............……………….(13)
Press RPT button (13) to continuously repeat the same song. Press again to cancel repeat
function.
SCAN...............………………………………………….(12)
The scan function enables you to listen to the first few seconds of the song. Press SCN button
(12) to activate/deactivate scan function.
PLAY SONGS IN RANDOM ORDER.........………….(14)
During MP3 operation, press SHF button (14) to play songs in random order. Press again to
cancel the function.
DISPLAY INFORMATION.................………………….(9)
Press DSP button (9) to show the following information, such as the clock, the ID3 TAG (if
available: song title, directory name, artist name, other contents…) and other information.
16
MIXED-CD OPERATION
LOU/ENT/ENT
OPEN
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
MON
MUT
DSP
LOC
MODE SW
1
PAU
2
SCN
3
RPT
4
SHF
5
DISC
6
DISC
1
2
This unit can play the mixed-CD disc (the disc contains both CD audio tracks and MP3 files).
When you insert a mixed-CD disc into the CD slot, it starts to play the CD audio tracks. And the
operation is the same as that of the CD operation described in page 12.
If you want to switch to play MP3 files, press CAT-DIR button (1) or CAT-DIR button (2), it
will search the disc and start to play the MP3 files. And the operation is the same as the MP3
operation described in page 16.
If you want to revert to play CD audio tracks, press CAT-DIR button (1) or CAT-DIR button (2)
repeatedly, until it reaches to the end (i.e. when it selects the first directory or the last directory),
and then press CAT-DIR button (1) or CAT-DIR button (2) again, it will start to play the CD
tracks again.
In this way, you can switch between playing CD audio tracks and MP3 songs repeatedly.
17
AUX MODE OPERATION
LOU/ENT/ENT
OPEN
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
MON
MUT
LOC
DSP
MODE SW
1
PAU
2
SCN
3
RPT
4
SHF
5
DISC
6
DISC
1
SWITCHING TO AUX MODE.......................................(1)
The unit has a pair of auxiliary input terminals (see WIRING figure on page 27). This allows you
to listen to an auxiliary audio source (MP3, portable cassette player, etc).
Press the MODE button (1) with the power on to switch from radio mode or Sirius mode or CD
(MP3) mode to AUX mode.
18
ERROR SIGNS
If a problem should occur while operating the CD player, one of the following error signs may be
displayed. Refer to the table below to identify the problem.
DISPLAY
ERROR 1
ERROR 2
DESCRIPTION
MECHANISM ERROR
SERVO ERROR
If a problem should occur while operating the CD CHANGER player, one of the following error
signs may be displayed. Refer to the table below to identify the problem.
DISPLAY
ERROR 1
ERROR 2
ERROR 3
ERROR 4
ERROR 5
ERROR 6
ERROR 7
ERROR 8
ERROR 9
ERROR 10
DESCRIPTION
MAGAZINE or MECHANISM ERROR
EJECT ERROR
LOADING ERROR
UNLOADING ERROR
ELEVATOR ERROR
SLED or SLED SWITCH ERROR
FOCUSING or DISC DATA READ ERROR
CLV or DATA READ ERROR
TOC READ ERROR
THERMAL ERROR
19
REMOTE CONTROL
3
5
A-Z/0-9
SW
SET
2
7
1
POWER
VOL
MANU/SKIP/CH
VOL
6
4
9
LOU/ENT/ENT
P
A
. S C N / M P 3
S
T
8
PAU
SCN
RPT
S-MODE
11
14
12
10
17
13
15
SHF
DISC/CAT/DIR
16
1.POWER
10.PAU
11.SCN
2. SEL/SET
12.RPT
3. VOL (A~Z/0~9)
4. VOL (A~Z/0~9)
5. MOD/SW
13.SHF
14.LOC/S-MODE
15. DISC/CAT/DIR
16.DISC/CAT/DIR
6. MANU/SKIP/CH
7. MANU/SKIP/CH
8. AS/PS/P.CAN/MP3
9. BAND/LOU/ENT/ENT
17.1~6 Preset buttons
REMOTE SENSOR……........…………………..….…..IR
Point the remote control handset to the remote sensor IR. Press the function keys on the
handset to control the system.
IR
LOU/ENT/ENT
OPEN
BAND
50W x 4
VOLUME
A-Z/0-9
SEL
IR
MANU/SKIP/CH
EQ
S-MODE
ECD-T1545
CAT-DIR
P. S C N
MP3
AS/PS
DSP
MON
MUT
LOC
MODE SW
1
PAU
2
SCN
3
RPT
4
SHF
5
DISC
6
DISC
20
HINTS FOR PROPER AND SAFE OPERATION
•
Condensation
Moisture can condense on the optical lens of the CD player during humid or rainy days, or after
the car heater is turned on. If this occurs the disc player may not function properly. To remedy
the situation, remove the disc from the unit and wait approximately one hour. This should allow
the moisture to evaporate and restore normal operation.
•
Temperature Consideration
The unit may not operate correctly in extremely hot or cold temperatures. Avoid exposing the
unit to extremely high or low temperatures.
•
Interruptions in the sound (skipping)
When the car is driven on very rough surfaces, the sound from the CD player may skip and be
interrupted. This will not cause any damage to the disc or the player. If this occurs, wait for the
road surface to improve before using the CD player.
•
•
Safety
For safer driving, keep the volume at a moderate level to enable you to hear outside sounds
(such as emergency vehicle sirens).
Cleaning the unit
Clean the unit with a soft, dry cloth. Stains should be removed by wiping the surfaces with a
soft cloth immersed in lukewarm water and wrung dry. Never use strong chemicals or solvents.
These will damage the finish of the unit.
•
•
Disc care
When not using the disc player for extended periods, remove the compact disc and return it to
the plastic storage case. Do not leave a disc partially ejected from the player. If an ejected disc
remains in the loading slot for approximately 10 seconds, the player will reload the disc to
prevent damage.
Servicing
Should a problem develop, do not open the unit or try to repair it yourself. If servicing is
required, bring the unit to a Sanyo Authorized Service Center.
21
TROUBLE SHOOTING
Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with
the unit. Before having the unit serviced, refer to the troubleshooting chart below.
Symptom
Cause
Solution
Turn up the volume control.
The compact disc The volume control is turned down.
does not play when
inserted into the
unit.
The power connections are not wired
correctly.
Check the +12V and ground
connections.
No power.
Switch the ignition to the “ON”
The vehicle ignition is switched off.
The fuse is blown.
or “ACC” position.
Replace the fuse with another 15A
fuse.
The unit does not The microcomputer has been affected Press RESET button.
work properly
by electrical noise.
(Eject, Load, Play)
The sound from the The road surface is rough.
CD player skips.
Wait for the road surface to
improve before playing a disc.
Install the unit securely. Be sure to
use the rear strap if the vehicle
does not provide support for the
rear of the unit. (See page 26)
Try another disc.
The unit is not mounted securely.
The disc is defective.
If it plays properly, the first disc
may be defective.
The disc is dirty.
Clean the disc as explained on
page 3.
No radio reception. The antenna cable is not connected.
Insert the antenna cable firmly into
the antenna jack on the unit.
The radio does not The signals are weak.
Select a station using manual
tuning.
stop on any
stations when
automatic tuning is
used.
22
ACCESSORIES AND HARDWARE
INSTALLATION
Mounting Bracket
(Half Sleeve) X1
Mounting Strap
and Screw X4
Locking Screw
X1
Unlock Levers
X2
Removable Trim Ring
X1
Carrying Case
X1
INSTALLATION
1. BEFORE INSTALLATION
When mounting the unit in a car, keep the unit as level as possible.
If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does
not tilt by more than 300.
23
2. INSTALLATION PROCEDURES
When mounting the unit into a DIN–standard cutout (182x53 mm) in the dashboard or console,
attach the provided Removable Trim Ring to the unit.
1. Insert the mounting bracket into the DIN-standard cutout (182x53 mm) in the dashboard or
console.
2. Bend the mounting bracket stopper outward until the bracket fits snugly in the cutout.
3. Attaching the Mounting Strap to the underside of the dashboard, using screw. Attach the back
of the unit to the Mounting Strap using support stem bolt and hardware.
UNIT REMOVAL
1. Insert the unlock levers into the slots on each side of the unit until they click into place.
2. Pull the levers to remove the unit.
Notes
• Handle the unlock levers carefully to avoid injuring your fingers.
• Keep the unlock levers in a safe place for future use.
24
ELECTRICAL CONNECTIONS
WIRING
RED
(BLACK)
Rch
Lch
WHITE
AUX IN CABLE
(BLACK)
CD CHANGER
AND SIRIUS RECEIVER
CONNECTOR SOCKET
ANTENNA SOCKET
(Brown)
Rch Red
(Brown)
Lch White
FRONT LINE OUT CABLE
(Gray)
Rch Red
(Gray)
Lch White
REAR LINE OUT CABLE
(Green)
SUBWOOFER CABLE
Power Antenna/Amplifier Turn On (Blue/Red)
Ground Wire (Black)
+12V Constant Power Supply (Yellow)
+12V Accessory/Switched (Red)
2-SPEAKER SYSTEM
4-SPEAKER SYSTEM
(GREEN/BLACK)
(GREEN/BLACK)
-
-
-
-
Rear Left
Speaker
Rear Left
Speaker
(GREEN)
(GREEN)
+
+
+
+
(WHITE/BLACK)
(WHITE)
(WHITE/BLACK)
(WHITE)
-
-
-
-
Front Left
Speaker
Front Left
Speaker
+
-
+
-
+
-
+
-
(GRAY/BLACK)
(GRAY/BLACK)
Front Right
Speaker
Front Right
Speaker
(GRAY)
(GRAY)
+
+
+
+
(VIOLET/BLACK)
(VIOLET)
(VIOLET/BLACK)
(VIOLET)
-
-
-
-
Rear Right
Speaker
Rear Right
Speaker
+
+
+
+
CAUTION
• DO NOT connect any speaker wires to the metal body or chassis of the
vehicle.
• DO NOT connect the speaker common (–) wires to each other.
• Connect each speaker wire directly to each speaker terminal.
• All speaker common (–) wires must remain floating.
1. Antenna Socket
•
Insert the plug from the antenna installed in your vehicle into this socket. (If your vehicle has a
dual antenna system, a dual antenna to single antenna cable adaptor may be required.)
2. + 12V Constant Power Supply (Yellow)
Connect this wire to the +12V power terminal which receives power continuously.
3. +12V Accessory/Switched (Red)
•
•
Connect this wire to the terminal which receives power while the ignition switch is ON or in the
ACCESSORY position.
•
If the ignition switch does not have on ACC position, connect this wire to a +12V power
terminal which receives power continuously. (Same as item 2.)
25
4. Ground Wire (Black)
Connect this wire to the vehicle chassis.
5. Power Antenna/Amplifier Turn On (Blue/Red)
•
•
•
Connect this wire to the control terminal of a Power Antenna or an external amplifier.
When not using a Power Antenna or an external amplifier, this wire is not connected.
6. I.R Remote Sensor Socket
•
Connect a remote IR sensor to I.R remote sensor socket to use with the corresponding
remote control and to extend range of remote control.
MAIN UNIT
(BLACK)
(OPTIONAL)
I.R REMOTE SENSOR SOCKET
REMOTE IR SENSOR
7. CD Changer and Sirius Receiving Connector Socket
•
•
•
Connect a CD changer to the CD changer and Sirius Receiving Connector socket
MAIN UNIT
(sold separately)
CDC
Connect a Sirius module to the CD changer and Sirius Receiving Connector socket
(see separate instruction booklet on Sirius Radio operation)
MAIN UNIT
(Sirius tuner module sold separately)
SIRIUS MODULE
Connect a Sirius module and a CD changer to the CD changer and Sirius Receiving
Connector socket (see separate instruction booklet on Sirius Radio operation)
MAIN UNIT
CDC
SIRIUS MODULE
(Surius tuner module and CD changer sold separately
26
LINE OUT CONNECTIONS
•
The unit has two pairs of line out terminals (see WIRING figure above). You can use a
separate front or a separate rear channel amplifier to upgrade your system.
RCA Line- out Jacks
•
Connect a patch cable (not supplied) from the White (left channel) and Red (right channel)
RCA line output jacks to the line input terminals of the external amplifier.
AUXILIARY INPUT CONNECTIONS
The unit has a pair of auxiliary input terminals. You can connect a portable audio player through
the terminals of the AUX IN cable (see WIRING figure above).
SANYO Electric Co., Ltd.
Printed in China
Issue date 12/26
27
SANYO MOBILE AUDIO
MODEL ECD-T1545 LIMITED WARRANTY
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service
Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized
Sanyo Service Centers may be obtained by calling the toll-free number listed below.
For product operation, authorized service center referral, service assistance or problem resolution, call
FACTORY SERVICE 1-800-421-6382
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF
AMERICA.
THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER, AND DOES NOT APPLY TO PRODUCTS USED FOR
ANY INDUSTRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE. THE ORIGINAL DATED BILL OF SALE OR SALES SLIP
MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS
REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY (SFC) warrants this SANYO
product against defects in materials and workmanship for the periods specified below. SFC will repair or replace (at its option) the
product and any of its parts which fail to conform to this warranty with new or reconditioned products or parts. The warranty
period commences on the date the product was first purchased at retail.
LABOR: 1 YEAR
PARTS: 1 YEAR
EXCLUSIONS
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s
instruction manual, or (B) the repair of any product whose serial number has been altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, knobs, batteries or routine maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after
repair.
This warranty does not apply to the elimination of car static or motor noise, correction of antenna problems, or damage to
compact discs, speakers, accessories or vehicle electrical systems. This warranty does not apply to repairs or replacements
necessitated by any cause beyond the control
of SFC including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts,
improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by the
user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other express warranties and SFC does not assume or authorize any party to assume for it any other
obligation or liability.
THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY IN NO EVENT SHALL SFC BE LIABLE
FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT,
OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES
BEYOND ITS CONTROL.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS
MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE.
For your protection in the event of theft or loss of this product, please fill in the information below for your own personal records.
Model No.
Serial No.
(Located on back or bottom side of unit)
Purchase Price
Date of Purchase
Where Purchased
28
21605 Plummer Street
Chatsworth, CA91311
ECD-T1545. Issue Number 1.
Printed in Hong Kong
4
|