This user manual includes detailed usage
instructions for your camera. Please read
this manual thoroughly.
Ä Click a topic
User Manual
SH100
Health and safety information
Comply with any regulations that restrict the use of a camera in
a certain area.
Caution—situations that could cause damage to your camera
or other equipment
• Avoid interference with other electronic devices.
• Turn off the camera when in an aircraft. Your camera can cause
interference with aircraft equipment. Follow all airline regulations
and turn off your camera when directed by airline personnel.
Remove the batteries from your camera when storing it for an
extended period of time.
Installed batteries may leak or corrode over time and cause
serious damage to your camera.
• Turn off the camera near medical equipment. Your camera can
interfere with medical equipment in hospitals or health care
facilities. Follow all regulations, posted warnings, and directions
from medical personnel.
Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries. Do not damage or heat the battery.
Inauthentic, damaged, or heated batteries may cause a fire or
personal injury.
Avoid interference with pacemakers.
Maintain a minimum of 15 cm (6 inches) between this
camera and all pacemakers to avoid potential interference,
as recommended by the manufacturer and the independent
research group, Wireless Technology Research. If you have
any reason to suspect that your camera is interfering with
a pacemaker or other medical device, turn off the camera
immediately and contact the manufacturer of the pacemaker or
medical device for guidance.
Use only Samsung-approved batteries, chargers, cables and
accessories.
• Using unauthorized batteries, chargers, cables or accessories
can cause batteries to explode, damage your camera, or cause
injury.
• Samsung is not responsible for damages or injuries caused by
unauthorized batteries, chargers, cables or accessories.
2
Health and safety information
Use the battery only for its intended purpose.
Do not force the camera’s parts or apply pressure to the
camera.
Misusing the battery may cause a fire or electric shock.
This may cause your camera to malfunction.
Do not touch the flash while it fires.
Exercise caution when you connect cables or adapters and
install batteries and memory cards.
The flash is very hot when fired and may burn your skin.
If you force the connectors, improperly connect cables, or
improperly install batteries and memory cards, you can damage
ports, connectors, and accessories.
When you use AC charger, turn off the camera before you
disconnect the power to the AC charger.
Failing to do so may result in fire or electric shock.
Keep cards with magnetic strips away from the camera case.
Disconnect the charger from the wall socket when not in use.
Information stored on the card may be damaged or erased.
Failing to do so may result in fire or electric shock.
Never use a damaged charger, battery, or memory card.
Do not use a damaged power supply cord, plug, or loose outlet
when you charge batteries.
This may result in electric shock or camera malfunction or cause
a fire.
These may cause a fire or electric shock.
Do not allow the AC charger to come in contact with the +/-
terminals on the battery.
This may cause a fire or electric shock.
3
Health and safety information
Check that the camera is operating properly before use.
Data transference and your responsibilities
The manufacturer takes no responsibility for any loss of files or
damage that may result from camera malfunction or improper
use.
• Data transferred via WLAN could be leaked, so avoid
transferring sensitive data in public areas or on open networks.
• The camera manufacturer is not liable for any data transfers that
infringe on copyrights, trademarks, intellectual property laws, or
public decency ordnances.
You must plug the end of the USB cable with the indicator light
(S) into your camera.
If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Avoid interference with other electronic devices.
Your camera emits radio frequency (RF) signals that may interfere
with unshielded or improperly shielded electronic equipment,
such as pacemakers, hearing aids, medical devices, and
other electronic devices in homes or vehicles. Consult the
manufacturers of your electronic devices to solve any interference
problems you experience. To prevent unwanted interference, use
only Samsung-approved devices or accessories.
Use your camera in the normal position.
Avoid contact with your camera’s internal antenna.
4
Outline of the User Manual
Copyright information
• Microsoft Windows and the Windows logo are
registered trademarks of the Microsoft Corporation.
• Mac is a registered trademark of the Apple Corporation.
• microSD™, microSDHC™ are registered trademarks of
the SD Association.
• Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance.
• Trademarks and trade names used in this manual are
the property of their respective owners.
• Camera specifications or contents of this manual may
be changed without prior notice due to upgrade of
camera functions.
• We recommend using your camera within the country
where you purchase it.
• You are not allowed to reuse or distribute any part of
this manual without prior permission.
• For Open Source License information, refer to the
‘OpenSourceInfo.pdf’ in the provided CD-ROM.
5
Icons used in this manual
Icon
Function
Additional information
Safety warnings and precautions
[ ]
( )
Camera buttons. For example, [Shutter] represents the shutter button.
Page number of related information
The order of options or menus you must select to perform a step; for example:
“
Touch
m
“ Photo Size (represents Touch
m
, and then touch Photo Size).
*
Annotation
Abbreviations used in this manual
Abbreviation
ACB
AEB
AF
Definition
Auto Contrast Balance
Auto Exposure Bracket
Auto Focus
AP
Access Point
DIS
Digital Image Stabilization
Digital Print Order Format
Exposure Value
DPOF
EV
ISO
International Organization for Standardization
White Balance
WB
6
Expressions used in this manual
Pressing the shutter
Exposure (Brightness)
• Half-press [Shutter]: press the shutter halfway down
• Press [Shutter]: press the shutter all the way down
The amount of light that enters your camera determines the
exposure. You can alter the exposure with shutter speed,
aperture value, and ISO sensitivity. By altering the exposure, your
photos will be darker or lighter.
Normal exposure
Overexposure (too bright)
Half-press [Shutter]
Press [Shutter]
Subject, background, and composition
• Subject: the main object in a scene, such as a person, animal,
or still life
• Background: the objects around the subject
• Composition: the combination of a subject and background
Background
Composition
Subject
7
Basic troubleshooting
Learn to solve common problems by setting shooting options.
The subject’s eyes
appear red.
Red eye is caused by the eyes reflecting light from the camera flash.
•
Set the flash option to
Red-eye or
Red-eye Fix. (p. 57)
•
Photos have dust
spots.
If dust particles are present in the air, you may capture them in photos when you use the flash.
•
Turn off the flash or avoid capturing photos in a dusty place.
•
Photos are blurred.
Blurring can occur if you capturing photos in low light conditions or hold the camera incorrectly.
Photos are blurred
when shooting at
night.
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the
camera steady long enough to take a clear picture and may result in camera shake.
•
•
•
•
Use a tripod to prevent your camera from shaking.
Subjects come out
When the light source is behind the subject or when there is a high contrast between the light and dark
too dark because of areas, the subject may appear too dark.
backlighting.
•
•
•
•
•
•
Avoid shooting toward the sun.
Set the metering option to
8
Quick reference
Capturing photos of people
Capturing photos of text, insects, or
flowers
•
Viewing files by category in
f
•
•
Beauty Shot mode
•
•
•
Scene mode > Text
f
f
•
•
Viewing files in 3D view
f
Red-eye/Red-eye Fix (to prevent or correct red-eye)
Close Up mode
f
Viewing files as thumbnails
f
f
Macro
f
•
Face Detection
f
•
•
Deleting files on the memory
card 87
f
Applying effects to photos
Viewing files as a slide show
Capturing photos at night or in the
dark
f
•
•
•
•
•
•
Object Highlight mode
f
•
•
Viewing files on a TV
f
•
•
•
•
Scene mode > Sunset, Dawn
f
Magic Frame shot mode
f
Connecting your camera to a
computer 99
Night Shot mode
f
Photo Filter mode
f
f
Flash options
f
Vignetting mode
f
•
•
•
•
•
•
•
Sending photos via email
ISO sensitivity (to adjust the sensitivity to light)
f
Smart Filter effects
f
f
Image Adjust (to adjust Saturation, Sharpness, or
Contrast) 76
Using photo or video sharing
websites 115
Capturing action photos
f
f
Adjusting sound and volume
f
Applying effects to videos
•
Continuous, Motion Capture
f
Adjusting the brightness of
f
•
•
•
Movie Filter mode
f
Adjusting the exposure (brightness)
Changing the display
language 131
Vignetting mode
f
f
Palette Effect mode
f
•
•
•
ISO sensitivity (to adjust the sensitivity to light)
f
Setting the date and time
EV (to adjust exposure)
f
f
Reducing camera shake
ACB (to compensate for subjects against bright
backgrounds) 69
Before contacting a service
center 143
f
f
•
•
Metering
f
•
Digital Image Stabilization (DIS)
f
AEB (to take 3 photos of the same scene with different
exposures) 72
f
9
Contents
11
Contents
12
Contents
13
Unpacking
The following items are included in your product box.
Optional accessories
Camera
AC adapter/USB cable
Camera case
A/V cable
Rechargeable battery
Strap
Battery charger
Memory card/Memory card
adapter
Touch pen
User Manual CD-ROM
The illustrations may differ slightly from the items shipped with your product.
Quick Start Manual
Basic functions 15
Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions.
Zoom button
•
•
In Shooting mode: Zoom in or out
In Playback mode: Zoom in on part of
a photo or view files as thumbnails
Shutter button
Flash
Speaker
AF-assist light/Timer lamp
Internal antenna*
* Avoid contact with the internal antenna
while using the wireless network.
Lens
Tripod mount
USB and A/V port
Accepts USB cable and A/V cable
Battery chamber cover
Insert a memory card and battery
Basic functions 16
Camera layout
POWER button
Playback button
Microphone
Attaching the strap
x
y
Status lamp
•
Blinking: When the camera is saving a photo or video,
being read by a computer or printer, or out of focus,
connecting to a WLAN, or sending a photo
Steady: When the camera is connecting to a
computer or in focus
Touch screen
•
Home button
Basic functions 17
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Push the card gently until
it disengages from the
camera, and then pull it out
of the slot.
Memory card
Insert a memory card
with the gold-colored
contacts facing up.
Battery lock
Slide the lock up to release
the battery.
Memory card
Insert the battery with
the Samsung logo facing
down.
Rechargeable battery
You can use the internal memory for temporary storage if a memory card is
not inserted.
Rechargeable battery
Basic functions 18
Charging the battery and turning on your camera
Charging the battery
Before you use the camera for the first time, you must charge the
battery. Attach the USB cable to the AC adapter, and then plug
the end of cable with the indicator light into your camera.
Turning on your camera
Press [POWER] to turn your camera on or off.
• The initial setup screen appears when you turn on the camera
for the first time. (p. 20)
Turning on your camera in Playback mode
Press [Playback]. The camera turns on and immediately
accesses Playback mode.
Indicator light
• Red: Charging
• Green: Fully charged
If you turn on your camera by pressing and holding [Playback] for about 5
seconds, the camera does not emit any sounds.
Basic functions 19
Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings.
Touch Language.
Touch Home, and then touch
zone.
z
or
x
to select a time
1
2
3
4
•
When you travel to another country, touch Visit, and then
select a new time zone.
Time Zone
London, Lisbon
Select a language, and then touch
o.
Touch
o
to save.
5
6
Touch Date/Time Set.
Touch Time Zone.
Basic functions 20
Performing the initial setup
Touch the up or down arrows to set the date.
Touch Touch Calibration.
7
10
11
Touch the target on the screen with your touch pen.
Date/Time Set
Year
Month
Day
Touch Calibration
Touch , and then set the time.
8
9
Touch directly in the center of the target for optimal performance.
Date/Time Set
Min
Hr
Touch
o
to save settings.
12
•
To set daylight-saving time, touch
.
Touch to save.
o
Basic functions 21
Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set.
Icon
Description
Icon
Description
Current time
Memory card inserted
•
•
•
: Fully charged
: Partially charged
: Empty (Recharge)
Aperture value
Shutter speed
Voice memo
Photo resolution
Video resolution
Metering
Timer
1
2
3
Auto focus frame
Camera shake
Zoom indicator
Zoom ratio
Digital Image Stabilization (DIS)
Exposure value adjusted
ISO sensitivity
1
Option icons (touch)
Icon
Description
Flash option
Photo resolution when Intelli
zoom is on
White balance
Auto focus option
Timer option
Burst type
Grid lines
Flash
m
Shooting options
Display type
Intelli zoom is off
3
Status icons
Smart filter
Icon
Description
Available number of photos
Image adjust
Face detection
Auto focus
2
Status icons
Available recording time
Icon
Description
Memory card not inserted
(Internal memory)
Shooting mode
Current date
Basic functions 22
Using the touch screen
Learn how to use the touch screen. Use the supplied touch pen to touch or drag on the screen.
Do not use sharp objects, such as pens or pencils, to touch the screen. You can damage the screen.
Touching
Flicking
Touch an icon to select a menu or option.
Gently flick the touch pen across the screen.
Smart Auto
Email
Program
Smart movie
Album
Web
Settings
Auto Back
Dragging
Touch and hold a part of the screen, and then drag the touch
pen.
White Balance
Auto WB
Daylight
Cloudy
Basic functions 23
Using the touch screen
Selecting an option
•
•
•
The touch screen may not recognize your inputs if you touch multiple
items at the same time.
The touch screen may not recognize your inputs if you touch the
screen with your finger.
When you touch or drag the screen, discolorations may occur.
This is not a malfunction, but a characteristic of the touch screen.
Touch or drag lightly to minimize the effect.
The touch screen may not work properly if you use the camera
in extremely humid environments.
The touch screen may not work properly if you apply screen protection
film or other accessories to the screen.
Depending on the viewing angle, the screen may appear dim.
Adjust the brightness or viewing angle to improve the resolution.
• Drag the option list up or down until you find the desired option.
Touch the option, and then touch o.
White Balance
Auto WB
Daylight
•
•
•
Cloudy
• If an option has a setting button, touch the button to turn it on
or off.
Drive
Smart Filter
Image Adjust
DIS
Basic functions 24
Setting the touch screen and sound
Learn how to change the screen display type and the sound settings.
Setting the display type for the touch screen
You can select from three screen display types. Each displays
differently.
Setting the sound
Set your camera to emit or not to emit a sound when you perform
functions.
In Shooting mode, touch
.
On the Home screen, touch
.
1
2
1
2
3
Select an option, and then touch
o
.
Touch Sound.
Touch the setting button next to Beep Sound to
turn the beep on or off.
Display Set
Full
Hide
Guide Line
Icon
Description
Full: Icons are always displayed.
Hide: Icons are hidden if you perform no operation
for 5 seconds (touch the screen to display the icons
again).
Guide Line: Grid lines are displayed. The grid lines
are helpful for getting the photo aligned with a surface,
such as the horizon or the edges of buildings.
Basic functions 25
Using the Home screen
You can select a shooting mode or access the settings menu by touching the icons on the Home screen.
Accessing the Home screen
Icons on the Home screen
In Shooting or Playback mode, press [HOME]. Press [HOME]
Icon
Description
again to return to the previous mode.
Smart Auto: Capture a photo by letting the camera select
a scene mode automatically. (p. 36)
Program: Capture a photo by manually setting options.
(p. 40)
Smart movie: Record a video by letting the camera select
a scene mode automatically. (p. 42)
Web: Access a web site to upload photos and videos
stored on the camera. (p. 115)
Email: Send photos stored on the camera as email
attachments. (p. 111)
Auto Backup: Send new photos and videos to a PC or
Smart movie
Album
Web
Smart Auto
Email
Program
1
2
Blu-ray disc player wirelessly (p. 123)
.
Album: View files by category in Smart album. (p. 84)
Auto Backup
Settings
Settings: Adjust settings to match your preferences.
(p. 128)
Remote Viewfinder: Use a mobile phone as a remote
No.
Description
shutter release via an ad-hoc wireless network. (p. 116)
Touch an icon to access a mode or function.
Camera to Camera : Connect your camera to another
camera via a wireless network to share photos and videos.
(p. 121)
1
2
•
Scroll to another page by dragging or flicking the touch
pen on the screen.
The number of the current page. (
)
Basic functions 26
Using the Home screen
Icon
Description
Icon
Description
AllShare: Connect your camera to an AllShare-enabled
device via a wireless network and view your files on the
connected device. (p. 118)
Simple Shot: Capture a photo with simple adjustments to
brightness and color. (p. 37)
Object Highlight: Capture a photo with the subject's
background blurred. (p. 44)
Movie: Record a video. (p. 41)
3D Album: View files with 3D effects. (p. 85)
Scene: Capture a photo with options that are preset for a
specific scene. (p. 38)
Slide Show: View photos as a slide show with effects and
Vignetting: Capture a photo or record a video with a
music. (p. 89)
vignetting effect. (p. 48)
Voice Recorder: Record and save a voice memo. (p. 50)
Beauty Shot: Capture a portrait with options to hide facial
imperfections. (p. 39)
Magazine: View files with page flip effect. (p.85)
Photo Editor: Edit photos with various effects. (p. 95)
Magic Frame shot: Capture a photo with various frame
effects. (p. 45)
Photo Filter: Capture a photo with various filter effects.
(p. 45)
Movie Filter: Record a video with various filter effects.
(p. 47)
Night Shot: Capture a night scene by adjusting shutter
speed and aperture value. (p. 39)
Palette Effect: Record a video with palette effects. (p. 49)
Close Up: Capture close-up photos of subjects. (p. 38)
Basic functions 27
Using the Home screen
Drag it to a new location.
2
Rearranging icons
•
To move an icon to another page, drag it to the left or right
edge of the screen. When you drop the icon to a new
location, the other icons will neatly slide out of the way.
You can rearrange the icons on the Home screen in any order.
Touch and hold an icon.
1
Smart Auto
Email
Program
Smart movie
bum
Web
Smart Auto
Email
Program
Smart movie
Album
Web
Settings
Auto Back
Settings
Basic functions 28
Capturing photos
Learn how to capture photos easily and quickly in Smart Auto mode.
Half-press [Shutter] to focus.
On the Home screen, touch
.
3
1
•
A green frame means the subject is in focus.
A red frame means the subject is out of focus.
•
Program
Smart movie
Album
Smart Au
Email
Web
Auto Backup
Settings
Align your subject in the frame.
2
Press [Shutter] to capture a photo.
4
See page 33 for tips to get clearer photos.
Basic functions 29
Capturing photos
Digital zoom
Zooming
If the zoom indicator is in the digital range, your camera is using
the Digital zoom. By using both the Optical zoom and Digital
zoom, you can zoom in up to 25 times.
You can capture close-up photos by adjusting the zoom. Your
camera has a 5X Optical zoom, 2X Intelli zoom, and 5X Digital
zoom. The Intelli zoom and Digital zoom cannot be used at the
same time.
Digital range
Zoom indicator
Optical range
•
•
•
The Digital zoom is available only in Program and Scene (except Text)
modes.
The Digital zoom is not available with a Smart Filter effect or Smart
Touch AF option.
If you capture a photo with the Digital zoom, the photo quality may
deteriorate.
Zoom ratio
Zoom in
Zoom out
The available zoom ratio for videos differs from photo zoom ratio.
Basic functions 30
Capturing photos
Intelli zoom
Setting Intelli zoom
If the zoom indicator is in the Intelli range, your camera is using
the Intelli zoom. Photo resolution varies according to the zoom
rate if you use the Intelli zoom. By using both the Optical zoom
and Intelli zoom, you can zoom in up to 10 times.
In Shooting mode, touch
m.
1
Touch the setting button next to Intelli Zoom.
2
Intelli range
Zoom indicator
Optical range
Photo resolution when
the Intelli zoom is on
•
•
The Intelli zoom is available only in Smart Auto, Program, and Scene
(except Text) modes.
The Intelli zoom is available only when you set a 4:3 resolution ratio. If
you set another resolution ratio with Intelli zoom on, the Intelli zoom will
be turned off automatically.
•
•
The Intelli zoom is not available with the Smart Filter effect, or Smart
Touch AF option.
The Intelli zoom helps you capture a photo with less quality
deterioration than the Digital zoom. However, the photo quality may be
lower than when you use the Optical zoom.
Basic functions 31
Capturing photos
Reducing camera shake (DIS)
•
•
DIS may not function properly when:
Reduce camera shake digitally in Shooting mode.
-
-
-
-
you move your camera to follow a moving subject
you use the Digital zoom
there is too much camera shake
the shutter speed is slow (for example, when you capture night
scenes)
-
-
the battery is low
you capture a close-up shot
If the camera is hit or dropped, the display will be blurry. If this occurs,
turn off the camera, and then turn it on again.
Before correction
After correction
In Shooting mode, touch
m.
1
2
Touch the setting button next to DIS.
Drive
Smart Filter
Image Adjust
DIS
Basic functions 32
Tips for getting a clearer photo
Holding your camera correctly
Reducing camera shake
Set the Digital Image Stabilization option to reduce
Ensure nothing is
blocking the lens.
camera shake. (p. 32)
When
h
is displayed
Half-pressing the shutter button
Half-press [Shutter] to adjust the focus.
The camera adjusts the focus and
exposure automatically.
Camera shake
The camera sets the aperture
value and shutter speed
automatically.
When you shoot in the dark, avoid setting the flash option to
Slow Sync or Off. The aperture remains open longer and it may be
harder to hold the camera steady long enough to take a clear picture.
Focus frame
•
Use a tripod or set the flash option to Fill in. (p. 57)
•
Press [Shutter] to capture the
photo if the focus frame appears
in green.
•
Set ISO sensitivity options. (p. 59)
•
Change the composition and
half-press [Shutter] again if the
focus frame appears in red.
Basic functions 33
Preventing your subject from being out of focus
•
When you capture photos in low light
Turn on the flash.
It may be difficult to get your subject in focus when:
-
there is little contrast between the subject and background
(for example, when your subject is wearing clothing that is similar in
color to the background)
(p. 57)
-
-
-
-
the light source behind the subject is too bright
the subject is shiny or reflective
the subject includes horizontal patterns, such as blinds
the subject is not positioned in the center of the frame
•
When subjects are moving rapidly
Use the Continuous
or Motion Capture
function. (p. 72)
Use the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to capture your photo.
Basic functions 34
Using shooting modes
Capture photos or record videos by selecting the best shooting mode for the conditions.
Icon
Description
Using the Smart Auto mode
In Smart Auto mode, your camera automatically chooses the
appropriate camera settings based on the type of scene it
detects. The Smart Auto mode is helpful if you are not familiar
with the camera settings for various scenes.
Portraits at night
Landscapes with backlighting
Portraits with backlighting
Portraits
On the Home screen, touch
.
1
2
Close-up photos of objects
Close-up photos of text
Sunsets
Align your subject in the frame.
•
The camera automatically selects a scene and adjusts its
settings. An appropriate scene icon appears at the top left of
the screen. The icons are listed below.
Clear skies
Forested areas
Close-up photos of colorful subjects
Camera is stabilized or on a tripod (when shooting in
the dark)
Fireworks (when using a tripod)
Actively moving subjects
Icon
Description
Landscapes
Scenes with bright white backgrounds
Landscapes at night (when the flash is off)
Extended functions 36
Using shooting modes
Half-press [Shutter] to focus.
Using the Simple Shot mode
In Simple Shot mode, you can capture photos with simple
adjustments to brightness and color.
3
•
In several scenes, the camera automatically captures a photo
when you half-press [Shutter].
Press [Shutter] to capture the photo.
4
On the Home screen, touch
.
1
2
•
•
•
If the camera does not recognize an appropriate scene mode, it uses
the default settings for the Smart Auto mode.
Even if it detects a face, the camera may not select a portrait mode
depending on the subject's position or lighting.
The camera may not select the correct scene depending on the
shooting conditions, such as camera shake, lighting, or distance to
the subject.
Drag the sliders to adjust Brightness and Color.
Brightness
Color
•
•
Even if you use a tripod, the camera may not detect the
subject is moving.
In Smart Auto mode, the camera consumes more battery power,
because it changes settings often to select appropriate scenes.
mode if the
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
4
Press [Shutter] to capture the photo.
Extended functions 37
Using shooting modes
Using the Scene mode
In Scene mode, you can capture a photo with options that are
preset for a specific scene.
Using the Close Up mode
In Close Up mode, you can capture close-up photos of subjects,
such as flowers or insects.
On the Home screen, touch
.
On the Home screen, touch
.
1
2
1
2
Touch a scene.
Align your subject in the frame, and then half-press
[Shutter] to focus.
Option Description
Landscape: Capture still-life scenes and landscapes.
Sunset: Capture scenes at sunset, with natural-looking
reds and yellows.
Dawn: Capture scenes at sunrise.
Backlight: Capture backlit subjects.
Beach & Snow: Reduce underexposure of subjects
caused by sunlight reflected from sand or snow.
Text: Clearly capture text from printed or electronic
documents.
Press [Shutter] to capture the photo.
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
4
Press [Shutter] to capture the photo.
Extended functions 38
Using shooting modes
Using the Night Shot mode
In Night Shot mode, you can use a slow shutter speed to extend
the time the shutter stays open. Increase the aperture value to
prevent overexposure.
Using the Beauty Shot mode
In Beauty Shot mode, you can capture a portrait with options to
hide facial imperfections.
On the Home screen, touch
.
1
2
On the Home screen, touch
.
1
2
Drag the sliders to adjust Face Tone and Face
Retouch.
Drag the dials on the screen to the arrow directions
below to adjust shutter speed and aperture value.
•
For example, increase the Face Tone setting to make skin
appear lighter.
Shutter speed
Face Tone
Face Retouch
Aperture
value
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
4
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
4
Press [Shutter] to capture the photo.
Press [Shutter] to capture the photo.
Use a tripod to prevent blurry photos.
When using the Beauty Shot mode, the focus distance will be set to Auto
Macro.
Extended functions 39
Using shooting modes
Setting the user buttons
Using the Program mode
In Program mode, you can set most options, except the shutter
speed and aperture value, which the camera sets automatically.
In Program mode, you can add shortcuts for your favorite options
to the left side of the screen.
In Shooting mode, touch
m
“ My screen “
o.
1
2
On the Home screen, touch
.
1
2
Touch and hold any icon, except one of the icons in the
column on the far left.
Touch
m, and then set desired options. (For a list of
options, refer to page 52.)
EV
My screen
OK
Cancel
Reset
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
4
Press [Shutter] to capture the photo.
Extended functions 40
Using shooting modes
Drag the icon into a desired box on the left.
3
Using the Movie mode
In Movie mode, you can record high-definition videos of up to 20
minutes in length. The camera saves recorded videos as MP4
(H.264) files.
•
To remove shortcuts, drag an icon to the right.
EV
My screen
•
H.264 (MPEG-4 part10/AVC) is a high-compression video format
established by the international standard organizations ISO-IEC and
ITU-T.
•
•
Some memory cards may not support high definition recording. In this
case, set a lower resolution.
Memory cards with slow writing speeds will not support high-
resolution videos and high-speed videos. To record high-resolution or
high-speed videos, use memory cards with faster writing speeds.
OK
Cancel
Reset
Touch
o to save.
4
On the Home screen, touch
.
1
2
Touch
m, and then set desired options. (For a list of
options, refer to page 52.)
Press [Shutter] or touch to start recording.
Press [Shutter] again or touch to stop recording.
3
4
You can create up to 3 shortcuts.
Extended functions 41
Using shooting modes
Pause recording
Using the Smart movie mode
In Smart movie mode, your camera automatically chooses the
appropriate camera settings based on the scene it has detected.
The camera allows you to temporarily pause a video while
recording. With this function, you can record separate scenes as
a single video.
On the Home screen, touch
.
1
2
Align your subject in the frame.
•
The camera automatically selects a scene and adjusts its
settings. An appropriate scene icon will appear at the top left
of the screen. The icons are listed below.
• Touch to pause while recording.
• Touch to resume.
Icon
Description
Landscapes
Sunsets
Clear skies
Forested areas
Extended functions 42
Using shooting modes
Press [Shutter] or touch to start recording.
3
Press [Shutter] again or touch to stop recording.
4
•
•
If the camera does not recognize an appropriate scene mode, it uses
the default settings for the Smart movie mode.
The camera may not select the correct scene depending on the
shooting conditions, such as camera shake, lighting, and distance to
the subject.
•
Smart filter effects are not available in Smart Movie mode.
Extended functions 43
Using effect modes
Capture photos or record videos with various effects.
Half-press [Shutter] to focus.
Using the Object Highlight mode
4
5
•
When the camera can apply the Object Highlight effect,
will appear.
The Object Highlight mode makes the subject more discernible
by adjusting the depth of field.
•
When the camera cannot apply the Object Highlight effect,
will appear. If this occurs, adjust the distance from the
camera to the subject.
On the Home screen, touch
.
1
2
Position the camera according to the optimum distance
displayed on the screen.
Press [Shutter] to capture the photo.
•
The optimum distance will vary, based on the zoom ratio you
use.
•
•
Available resolutions in Object Highlight mode are
and
.
If the shooting distance is not within the optimum range, you can
capture a photo but the Object Highlight effect will not be applied.
The Object Highlight effect cannot be used in dark places.
The Object Highlight effect cannot be used with the Optical zoom at
3X or higher.
Drag the sliders to adjust Blur and Tone.
3
•
•
•
•
Digital zoom is not available in Object Highlight mode.
Use a tripod to prevent camera shake as the camera captures 2
consecutive photos to apply the effect.
Blur
•
•
The subject and the background should have a significant contrast
in color.
Subjects should be positioned far away from the background for the
greatest effect.
Tone
Extended functions 44
Using effect modes
Using the Magic Frame Shot mode
In Magic Frame Shot mode, you can apply various frame effects
to your photos. The shape and the feel of the photos will change
according to the frame you select.
Using the Photo Filter mode
In Photo Filter mode, you can apply various filter effects to your
photos.
On the Home screen, touch
Select a desired frame.
.
1
2
Miniature
Fish-eye
Vignetting
Sketch
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
4
On the Home screen, touch
.
1
2
Touch a desired filter.
Press [Shutter] to capture the photo.
•
To view the original photo, touch Before.
•
To view the photo with the filter effect, touch After.
In Magic Frame shot mode, the resolution is automatically set to
.
Extended functions 45
Using effect modes
Option
Description
Defog
Make image clearer.
Classic
Retro
Apply a black and white effect.
Apply a sepia tone effect.
Apply a negative film effect.
Negative
Before
After
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
4
Option
Description
Apply a tilt-shift effect to make the subject appear
in miniature.
Miniature
Press [Shutter] to capture the photo.
Apply the retro-looking colors, high contrast, and
strong vignette effect of Lomo cameras.
Vignetting
•
•
•
To apply filter effects to saved photos, touch
.
When you select Sketch, the resolution will change to
When you select Fish-eye, the resolution will change to
below.
and below.
and
Soft-Focus
Old Film 1
Old Film 2
Hide facial imperfections or apply dreamy effects.
Apply vintage film effect 1.
Apply vintage film effect 2.
Half Tone
Dot
Apply a halftone effect.
Sketch
Apply a pen sketch effect.
Blacken the edges of the frame and distort objects
to imitate the visual effect of a fisheye lens.
Fish-eye
Extended functions 46
Using effect modes
Option
Classic
Retro
Description
Using the Movie Filter mode
Apply a black and white effect.
Apply a sepia tone effect.
Apply a negative film effect.
In Movie Filter mode, you can record videos with various filter
effects.
Negative
On the Home screen, touch
Touch a desired filter.
.
1
2
Press [Shutter] or touch to start recording.
3
4
Press [Shutter] again or touch to stop recording.
•
•
•
If you select Miniature, the speed of the video will increase.
If you select Miniature, the camera will not record sound.
If you select Miniature, Vignetting, Half Tone Dot, Sketch,
Fish-eye, or Defog, the recording speed will be set to
recording resolution will be set to less than
and the
.
Option
Description
Apply a tilt-shift effect to make the subject
appear in miniature.
Miniature
Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Vignetting
Half Tone Dot
Sketch
Apply a halftone effect.
Apply a pen sketch effect.
Distort close objects to imitate the visual effect
of a fisheye lens.
Fish-eye
Defog
Make the image clearer.
Extended functions 47
Using effect modes
Align your subject in the frame, and then half-press
[Shutter] to focus.
Using the Vignetting mode
4
5
In Vignetting mode, you can capture a photo or record a video
with a vignetting effect.
Press [Shutter] to capture the photo.
On the Home screen, touch
.
1
2
3
To apply the Vignetting effect to saved photos in Shooting mode, touch
.
Select
(photo) or
(movie).
Drag the sliders to adjust Level, Brightness, and
Contrast.
•
To view the original photo, touch Before.
•
To view the photo with the Vignetting effect, touch After.
Level
Brightness
Contrast
Before
After
Extended functions 48
Using effect modes
Option
Description
Using the Palette Effect mode
In Palette Effect mode, you can record a video with effects to
make specific colors stand out.
Create a vivid look with sharp contrast and a
red color.
Palette Effect 1
Make scenes clean and clear by applying a
soft blue tone.
Palette Effect 2
On the Home screen, touch
Touch a desired palette.
.
1
2
Palette Effect 3
Palette Effect 4
Apply a soft brown tone.
Create a cold and monotone effect.
Press [Shutter] or touch to start recording.
3
4
Press [Shutter] again or touch to stop recording.
Extended functions 49
Recording voice memos
Learn how to record a voice memo that you can play back later. You can also add a voice memo to a photo to remind you of shooting
conditions.
You will get the best sound quality when you speak 16 in (40 cm) away from the camera.
Press [Shutter] again or touch to stop recording.
Recording a voice memo
3
On the Home screen, touch
.
To view the list of saved voice memos, touch
.
1
Press [Shutter] or touch to start recording.
2
•
Touch to pause or touch to resume.
Each memo can be up to 10 hours long if memory is
available.
•
Extended functions 50
Recording voice memos
Record a short voice memo (10 seconds maximum).
Adding a voice memo to a photo
In Program mode, you can add a voice memo to a captured
photo.
4
•
Press [Shutter] to stop recording a voice memo before the
10 seconds are up.
On the Home screen, touch
.
You cannot add voice memos to photos in the burst mode.
1
2
Touch
m, and then touch the setting button next to
Memo.
Align your subject in the frame, and then capture a
photo.
3
•
The camera begins to record a voice memo right after you
capture the photo.
Extended functions 51
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Selecting a resolution
Icon
Description
As you increase the resolution, your photo or video will include
more pixels, so it can be printed on larger paper or displayed on
a larger screen. When you use a high resolution, the file size will
also increase.
4320 X 3240: Print on A1 paper.
4320 X 2880: Print on A1 paper in wide ratio (3:2).
4320 X 2432: Print on A2 paper in panorama ratio(16:9)
or play back on an HDTV.
Setting a photo resolution
3648 X 2736: Print on A2 paper.
2592 X 1944: Print on A4 paper.
1984 X 1488: Print on A5 paper.
In Shooting mode, touch
m
“ Photo Size.
1
2
Select an option, and then touch
o.
1920 X 1080: Print on A5 paper in panorama ratio (16:9)
or play back on an HDTV.
Photo Size
4320 X 2880
4320 X 2432
3648 X 2736
1024 X 768: Attach to an email.
Shooting options 53
Selecting a resolution and quality
Setting a video resolution
Selecting image quality
Set the photo and video quality settings. Higher image quality
settings will result in larger file sizes.
In Shooting mode, touch
m
“ Movie Size.
1
Select an option, and then touch
o.
2
Setting the photo quality
The camera compresses and saves the photos you capture in
the JPEG format.
Movie Size
1280 X 720 HQ
1280 X 720
In Shooting mode, touch
m
“ Quality.
1
2
Select an option, and then touch
o.
640 X 480
Quality
Super Fine
Fine
Icon
Description
1280 X 720 HQ: Play back high-quality files on an HDTV.
1280 X 720: Play back on an HDTV.
Normal
640 X 480: Play back on an analog TV.
320 X 240: Post on a web page.
Icon
Description
For Sharing: Post on a website using the wireless
network (30 seconds maximum).
Super Fine: Capture photos in super high quality.
Fine: Capture photos in high quality.
Normal: Capture photos in normal quality.
Shooting options 54
Selecting a resolution and quality
Setting the video quality
The camera compresses and saves the videos you record in the
MP4 (H.264) format.
In Shooting mode, touch
m
“ Frame Rate.
1
2
Select an option, and then touch
o
.
•
As the frame rate increases, action appears more natural, but
the file size also increases.
Frame Rate
30 FPS
15 FPS
Icon
Description
30 FPS: Record 30 frames per second.
15 FPS: Record 15 frames per second.
Shooting options 55
Using the timer
Learn how to set the timer to delay shooting.
Press [Shutter] to start the timer.
In Shooting mode, touch
m
“ Timer.
3
1
2
•
The AF-assist light/timer lamp blinks. The camera will
automatically capture a photo at the specified time.
Select an option, and then touch
o.
Timer
10 Sec
2 Sec
•
•
Press [Shutter] to cancel the timer.
Depending on the Face Detection option you have selected, the timer
function or some of its options may not be available.
Self timer options are not available if you set Burst options.
•
Double
Icon
Description
Off: The timer is not active.
10 Sec: Capture a photo after a 10-second delay.
2 Sec: Capture a photo after a 2-second delay.
Double: Capture one photo after a 10-second delay
and another photo after a 2-second delay.
Available options may differ depending on the shooting mode.
Shooting options 56
Shooting in the dark
Learn how to capture photos at night or in low light conditions.
Preventing red-eye
Using the flash
If the flash fires when you capture a photo of a person in the dark,
a red glow may appear in the person’s eyes. To prevent this,
select Red-eye or Red-eye Fix. Refer to flash options in “Using
the flash.”
Use the flash when you capture photos in the dark or when you
need more light on your photos.
In Shooting mode, touch
m
“ Flash.
1
2
Select an option, and then touch
o.
Flash
Auto
Red-eye
Fill in
This option is available in Program, Beauty Shot and Night Shot modes.
Icon
Description
Off:
•
The flash will not fire.
•
The camera will display the shake warning
you are shooting in low light.
when
Auto: The flash will fire automatically when the subject
or background is dark.
Shooting options 57
Shooting in the dark
Icon
Description
Red-eye:
•
•
•
Flash options are not available if you set burst options or select
Self-Portrait or Blink Detection.
Make sure that your subjects are within the recommended distance
from the flash. (p. 146)
If light from the flash is reflected or there is a substantial amount of
dust in the air, tiny spots may appear in your photo.
•
The flash will fire twice when the subject or
background is dark to reduce the red-eye effect.
•
There is an interval between the 2 bursts of the flash.
Do not move until the flash fires a second time.
Fill in:
•
The flash always fires.
•
The camera automatically adjusts the flash's intensity.
Slow Sync:
•
The flash fires and the shutter stays open longer.
•
This option is recommended when you want to
capture ambient light to reveal more details in the
background.
•
•
Use a tripod to prevent your photos from blurring.
The camera will display the shake warning
you are shooting in low light.
when
Red-eye Fix:
•
The flash fires twice when the subject or background
is dark, and the camera corrects red-eyes through its
advanced software analysis.
•
There is an interval between the 2 bursts of the flash.
Do not move until the flash fires a second time.
Available options may differ depending on the shooting mode.
Shooting options 58
Shooting in the dark
Adjusting the ISO sensitivity
The ISO sensitivity is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher the ISO sensitivity you select, the more sensitive to
light your camera becomes. With a higher ISO sensitivity, you can
get a better photo without using the flash.
In Shooting mode, touch
m
“ ISO.
1
2
Select an option, and then touch
o
.
•
Select Auto to have the camera select an appropriate ISO
sensitivity based on the brightness of the subject and lighting.
ISO
ISO 80
ISO 100
ISO 200
Higher ISO sensitivities may result in more image noise.
Shooting options 59
Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.
Using macro
Use macro to capture close-up photos of subjects, such as
flowers or insects.
In Shooting mode, touch
m
“ Focus.
1
2
Select Macro, and then touch
o.
Focus
Normal (AF)
Macro
Icon
Description
Normal (AF): Focus on a subject farther than 32 in
(80 cm).
Macro: Manually focus on a subject that is 2-32 in
(5-80 cm) from the camera. 39-59 in (100-150 cm)
when you use the zoom.
•
•
Try to hold the camera firmly to prevent blurry photos.
Turn off the flash if the distance to the subject is less than 16 in
(40 cm).
Shooting options 60
Changing the camera’s focus
Using Smart Touch focus
•
•
If you do not touch any area on the screen, the focus frame will appear
in the center of the screen.
Tracking a subject may fail when:
Smart Touch AF allows you to track and auto focus on your
subject, even when you are moving.
-
-
-
-
-
the subject is too small
the subject moves excessively
the subject is backlit or you are shooting in a dark place
colors or patterns on the subject and the background are the same
the camera shakes excessively
In Shooting mode, touch
m
“ Focus Area.
Select Smart Touch AF, and then touch
Touch the subject you want to track in the touch area.
1
2
3
o
.
•
•
•
•
When tracking a subject fails, the focus frame will appear as a white
single-line frame ( ).
If the camera fails to track the subject, you must reselect the subject
to track.
If the camera fails to focus, the focus frame will change to a red single-
line frame (
).
If you use this function, you cannot set self timer options,
Face Detection options, and Smart Filter options.
•
•
The white frame means that your camera is tracking the
subject.
The green frame means that your subject is in focus when you
half-press [Shutter].
Shooting options 61
Changing the camera’s focus
Using one touch shooting
You can focus on a subject and capture a photo with the touch
of your finger.
Adjusting the focus area
You can get clearer photos by selecting an appropriate focus
area according to your subject’s location in the scene.
In Shooting mode, touch
m
“ Focus Area.
In Shooting mode, touch
m
“ Focus Area.
1
2
3
1
2
Select One Touch Shooting, and then touch
o
.
Select an option, and then touch
o.
Touch a subject to capture the photo.
Focus Area
Multi AF
One Touch Shooting
Smart Touch AF
Icon
Description
Center AF: Focus on the center of the frame (suitable
when subjects are located at or near the center).
If you use this function, you cannot set Self Timer options, burst options, and
Smart Filter effects.
Multi AF: Focus on one or more of 9 possible areas.
One Touch Shooting: Focus on the subject by
touching the image on the screen. Touch and hold the
subject to capture the photo. (p. 62)
Smart Touch AF: Focus on and track the subject that
you touch on the screen. (p. 61)
Shooting options 62
Using face detection
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera
adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use
Smart Face Recognition to register faces and prioritize the focus on them.
Detecting faces
•
•
The camera automatically tracks the registered face.
Face detection may not be effective when:
Your camera automatically detects up to 10 human faces in one
scene.
-
the subject is far from the camera (The focus frame will appear
orange for Smile Shot and Blink Detection.)
it is too bright or too dark
-
-
-
-
-
In Shooting mode, touch
m
“ Face Detection.
1
2
the subject is not facing the camera
the subject is wearing sunglasses or a mask
the subject’s facial expression changes drastically
the subject is backlit or the lighting conditions are unstable
Select Normal, and then touch
o
.
•
•
•
•
•
Depending on the shooting options, available Face Detection options
may differ.
Depending on the Face Detection options you selected, the timer
function may not be available or available timer options may differ.
When you set the Face Detection options, some burst options are
not available.
When you capture photos of detected faces, they will be registered
in the face list.
You can view registered faces in order of priority in Playback mode.
(p. 84) Even though faces are registered successfully, they may not be
classified in Playback mode.
The nearest face appears in a white focus frame and
the rest of the faces appear in gray focus frames.
•
A face detected in Shooting mode may not appear in the face list or
Smart Album.
•
•
•
The closer you are to the subjects, the quicker your camera will detect
faces.
To focus on a subject in a gray focus frame, touch the face in the
frame.
The camera may not register detected faces if you set burst options
such as Continuous, Motion Capture, and AEB.
Shooting options 63
Using face detection
Capturing a self portrait shot
Take photos of yourself. The focus distance will be set to close-
up and your camera will emit a beep.
Capturing a smile shot
The camera automatically releases the shutter when it detects a
smiling face.
In Shooting mode, touch
m
“ Face Detection.
In Shooting mode, touch
m
“ Face Detection.
1
2
3
1
2
3
Select Self-Portrait, and then touch
o
.
Select Smile Shot, and then touch
o.
When you hear a quick beep, press [Shutter].
Compose your shot.
•
The camera automatically releases the shutter when it detects
a smiling face.
When faces are located in the
center, the camera beeps rapidly.
When your subject smiles broadly, your
camera can detect the smile more easily.
If you turn Volume off in the sound settings, the camera will not emit a beep.
(p. 129)
Shooting options 64
Using face detection
Detecting eye blinking
Using Smart Face Recognition
If your camera detects closed eyes, it will automatically capture
2 photos in succession.
The camera automatically registers faces that you frequently
photograph. The Smart Face Recognition feature will
automatically prioritize the focus on those faces and on favorite
faces. The Smart Face Recognition feature is available only when
you use a memory card.
In Shooting mode, touch
m
“ Face Detection.
1
2
Select Blink Detection, and then touch
o
.
In Shooting mode, touch
m
“ Face Detection.
1
2
Select Smart Face Recognition, and then touch
o
.
•
•
Hold your camera still while “Capturing” is displayed on the screen.
If blink detection fails, the “Picture taken with eyes closed.”
message appears. Capture another photo.
The nearest face appears in a white focus frame and the rest of
the faces appear in gray focus frames.
•
: Faces that you have registered as favorites. (To register
faces as favorites, refer to page 66.)
•
: Faces that the camera automatically registers.
Shooting options 65
Using face detection
Registering faces as your favorites (My Star)
You can register your favorite faces to prioritize the focus and
exposure on those faces. This feature is available only when you
use a memory card.
•
•
•
The camera may recognize and register faces incorrectly depending
on lighting conditions, drastic changes in the subject's pose or face,
and whether or not the subject is wearing glasses.
The camera can automatically register up to 14 faces. If the camera
recognizes a new face when 14 faces have already been registered,
it will replace the lowest priority face with the new one.
In Shooting mode, touch
m
“ Smart FR Edit.
1
2
3
The camera can detect up to 5 favorite faces in one scene.
Select My Star, and then touch
o
.
Align your subject’s face with the oval guideline, and then
press [Shutter] to register the face.
•
•
•
If the subject’s face is not aligned with the oval guideline, the white
frame will not appear.
Capture 5 photos of the subject’s face: one each from the front, left,
right, above, and below.
Capture photos of one person at a time when registering faces.
Shooting options 66
Using face detection
Touch
when the face list appears.
4
•
Your favorite faces are indicated with a
on the face list.
•
•
•
You can register up to 6 favorite faces.
The flash will not fire when you register a favorite face.
If you register the same face twice, you can delete one of the faces
in the face list.
Viewing your favorite faces
In Shooting mode, touch
m
“ Smart FR Edit.
1
Select Face List, and then touch
o.
2
•
•
To change the ranking of your favorite faces, touch
To delete a favorite face, touch
. (p. 83)
.
Shooting options 67
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Adjusting the exposure manually (EV)
Depending on the intensity of the ambient light, your photos
may be too bright or dark. In these cases, you can adjust the
exposure to get a better photo.
•
•
Once you adjust the exposure, the setting will be stored automatically.
You may need to change the exposure value later to avoid
overexposure or underexposure.
If you cannot decide on an appropriate exposure, select AEB
(Auto Exposure Bracket). The camera will capture 3 consecutive
photos, each with a different exposure: normal, underexposed, and
overexposed. (p. 72)
Darker (-)
Brighter (+)
Neutral (0)
In Shooting mode, touch
m
“ EV.
1
2
Select a desired value, and then touch
o
.
•
•
The photo will be brighter as exposure increases.
When you adjust the exposure value, the icon will appear as
shown below.
Shooting options 68
Adjusting brightness and color
Compensating for backlighting (ACB)
•
•
The ACB feature is always on in Smart Auto, Scene (Beach & Snow)
modes.
The ACB feature is not available when you set Continuous, Motion
Capture, or AEB options.
When the light source is behind your subject or there is high
contrast between your subject and the background, your subject
is likely to appear dark in the photo. In this case, set the Auto
Contrast Balance (ACB) option.
Changing the metering option
The metering mode refers to the way in which a camera
measures the quantity of light. The brightness and lighting of your
photos will vary depending on the metering mode you select.
Without ACB
With ACB
In Shooting mode, touch
m
“ Metering.
1
2
Select an option, and then touch
o.
In Shooting mode, touch
m.
1
2
Metering
Touch the setting button next to ACB.
Multi
Smart FR Edit
Photo Size
Quality
Spot
Center-weighted
ACB
Shooting options 69
Adjusting brightness and color
Icon
Description
Selecting a light source (White balance)
Multi:
The color of your photo depends on the type and quality of the
light source. If you want the color of your photo to be realistic,
select a white balance setting that is appropriate for the lighting
conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.
•
Your camera divides the frame into several areas,
and then measures the light intensity of each area.
•
Suitable for general photos.
Spot:
•
•
•
Your camera measures only the light intensity of the
very center of the frame.
If a subject is not in the center of the frame, your
photo may be improperly exposed.
Suitable for a subject with backlighting.
Center-weighted:
Auto WB
Daylight
•
Your camera averages the meter reading of the entire
frame with emphasis placed on the center.
•
Suitable for photos with subjects in the center of the
frame.
Cloudy
Tungsten
Shooting options 70
Adjusting brightness and color
Defining your own white balance
In Shooting mode, touch
m
“ White Balance.
1
You can customize the White Balance by capturing a photo of
a white surface, such as a piece of paper, under the lighting
conditions in which you intend to capture a photo. The White
Balance feature will help your camera reproduce the colors that
are in the scene accurately in your photo.
Select an option, and then touch
o.
2
White Balance
Daylight
Cloudy
In Shooting mode, touch
m
“ White Balance.
1
2
3
Fluorescent_H
Select Custom Set, and then touch
o
.
Aim the lens at a piece of white paper, and then press
[Shutter].
Icon
Description
Auto WB: Automatically set the White Balance based
on the lighting conditions.
Daylight: For outdoor photos on a sunny day.
Cloudy: For outdoor photos on a cloudy day or in
shadows.
Fluorescent_H: For shooting under a daylight
fluorescent or 3-way fluorescent light.
Fluorescent_L: For shooting under white fluorescent
light.
Tungsten: For shooting indoor photos under
incandescent bulbs or halogen lamps.
Custom Set: Use White Balance settings that you
defined.
Shooting options 71
Using burst modes
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In
these cases, select one of the burst modes to rapidly capture multiple photos.
Icon
Description
Single: Capture a single photo.
Continuous:
•
While you are pressing [Shutter], the camera
continuously captures photos.
•
The maximum number of photos depends on the
capacity of your memory card.
Motion Capture: While you are pressing [Shutter], the
camera captures VGA photos (6 photos per second;
maximum of 30 photos).
In Shooting mode, touch
m
“ Drive.
1
2
Select an option, and then touch
o.
AEB:
Drive
•
Capture 3 consecutive photos, each with a different
exposure: normal, underexposed, and overexposed.
Continuous
•
Use a tripod to prevent blurry photos.
Motion Capture
AEB
•
•
•
You can use the flash, timer, ACB, and Smart Filter only when you
select Single.
When you select Motion Capture, your camera will set the resolution
to VGA and set the ISO sensitivity to Auto.
Depending on the Face Detection option you selected, some burst
options may not be available.
Shooting options 72
Applying effects/Adjusting images
Available filters in Program mode
Applying Smart Filter effects
Apply various filter effects to your photos and videos to create
unique images.
Icon
Description
Normal: No effect
Miniature: Apply a tilt-shift effect to make the subject
appear in miniature.
Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Soft-Focus: Hide facial imperfections or apply dreamy
effects.
Miniature
Vignetting
Old Film 1: Apply vintage film effect 1.
Old Film 2: Apply vintage film effect 2.
Half Tone Dot: Apply a halftone effect.
Sketch: Apply a pen sketch effect.
Fish-eye: Blacken the edges of the frame and distort
objects to imitate the visual effect of a fisheye lens.
Fish-eye
Sketch
Defog: Make a photo clearer.
In Shooting mode, touch
m
“ Smart Filter.
1
Classic: Apply a black and white effect.
Select a filter, and then touch
o.
2
Shooting options 73
Applying effects/Adjusting images
Icon
Description
Icon
Description
Miniature: Apply a tilt-shift effect to make the subject
Retro: Apply a sepia tone effect.
appear in miniature.
Negative: Apply a negative film effect.
Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Custom RGB: Customize a color value.
Half Tone Dot: Apply a halftone effect.
•
•
When you select Sketch, the resolution will change to
When you select Fish-eye, the resolution will change to
below.
and below.
and
Sketch: Apply a pen sketch effect.
Fish-eye: Distort close objects to imitate the visual effect of
a fisheye lens.
Defog: Make image clearer.
Available filters in Movie mode
Classic: Apply a black and white effect.
Icon
Description
Retro: Apply a sepia tone effect.
Normal: No effect
Negative: Apply a negative film effect.
Palette Effect 1: Create a vivid look with sharp contrast and
red color.
Custom RGB: Customize a color value.
Palette Effect 2: Make scenes clean and clear by applying
a soft blue tone.
Palette Effect 3: Apply a soft brown tone.
Palette Effect 4: Create a cold and monotone effect.
Shooting options 74
Applying effects/Adjusting images
Defining your own RGB tone
•
•
•
If you select Miniature when you are recording a video, the speed of
the video will increase.
If you select Miniature when you are recording a video, the camera
will not record sound.
If you select Miniature, Vignetting, Half Tone Dot, Sketch, Fish-
eye, or Defog while recording a video, the recording speed will be set
In Shooting mode, touch
m
“ Smart Filter.
Select Custom RGB, and then touch
Drag up or down to adjust the values of each color.
1
2
3
o
.
to
and the recording resolution will be set to less than
.
•
If you set Smart Filter effects, you cannot use the Face Recognition,
options, ACB, burst options, Image Adjustment options, Intelli zoom,
or Smart Touch AF.
•
The higher the value, the brighter the photo.
The lower the value, the darker the photo.
•
Custom RGB
Touch
o
to save your changes.
4
Shooting options 75
Applying effects/Adjusting images
Touch
o
to save your changes.
Adjusting your photos
Adjust the sharpness, saturation, or contrast of your photos.
3
Sharpness
Description
Soften the edges on your photos (suitable for
editing the photos on your computer).
-
In Shooting mode, touch
m
“ Image Adjust.
1
2
Sharpen the edges to improve the clarity of your
photos. This may also increase the noise on your
photos.
Drag up or down to adjust each value.
+
•
•
•
: Sharpness
: Contrast
: Saturation
Contrast
Description
-
Decrease the color and brightness.
Increase the color and brightness.
Image Adjust
+
Saturation
Description
-
Decrease the saturation.
Increase the saturation.
+
•
•
Select 0 if you do not want to apply any effects (suitable for printing).
If you set adjustment functions, you cannot use Smart Filter options.
Shooting options 76
Reducing the zoom sound
When you use the zoom while recording videos, the camera can record the sound of the zoom in the videos. Use the Sound Alive function
to reduce the zoom noise.
In Shooting mode, touch
m
“ Voice.
1
2
Select an option, and then touch
o.
Voice
Sound Alive On
Sound Alive Off
Mute
Icon
Description
Sound Alive On: Turn on the Sound Alive function.
Sound Alive Off: Turn off the Sound Alive function.
Mute: Do not record sounds.
•
•
Do not block the microphone when you use the Sound Alive function.
Recordings made with Sound Alive may differ from actual sounds.
Shooting options 77
Available shooting options by shooting mode
For details about shooting options, refer to "Shooting options".
Smart Auto
Simple Shot
Scene
Close Up
Night Shot
Beauty Shot
Program
Movie
Resolution
Quality
O
-
O
O
O
U
-
O
O
O
U
-
O
O
O
-
O
O
O
U
-
O
O
O
U
-
O
O
O
O
O
O
O
O
O
O
O
O
O
U
O
-
O
O
U
-
Timer
U
U
-
Flash
ISO sensitivity
Macro
-
-
-
O
-
U
-
U
-
U
-
U
-
U
-
Focus area
Face detection
EV
-
-
-
-
-
U
-
U
-
U
-
-
-
-
O
-
ACB
-
-
-
-
U
-
U
-
Metering
White balance
Drive
-
-
-
-
O
O
-
-
-
-
-
-
-
-
-
-
-
-
-
Smart filter
Image adjust
Sound Alive
Digital zoom
Intelli zoom
DIS
-
-
-
-
-
-
U
-
-
-
-
-
-
-
-
-
-
-
-
-
O
-
-
-
-
-
-
O
U
O
O
U
U
O
-
-
-
-
-
-
U
O
-
O
-
O
-
O
-
O
-
-
Voice memo
-
O All options are available.
In these modes, some options are limited or a certain option is set by default.
U
Shooting options 78
Available shooting options by shooting mode
Object
Highlight
Magic Frame
shot
Vignetting
(photo)
Vignetting
(movie)
Smart movie
Photo Filter
Movie Filter
Palette Effect
Resolution
Quality
O
O
U
-
-
O
O
O
-
O
O
O
U
-
O
-
O
O
O
U
-
O
O
U
-
O
O
U
-
U
O
O
U
-
Timer
U
-
Flash
ISO sensitivity
Macro
-
-
-
-
-
-
-
-
U
-
U
-
U
-
U
-
Focus Area
Face detection
EV
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ACB
-
-
-
-
-
-
-
-
Metering
White balance
Drive
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Smart filter
Image adjust
Sound Alive
Digital zoom
Intelli zoom
DIS
-
-
-
-
-
U
-
U
-
U
-
-
-
-
-
-
O
-
-
-
-
O
-
-
O
-
O
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Voice memo
-
-
-
-
-
-
-
-
O All options are available.
In these modes, some options are limited or a certain option is set by default.
U
Shooting options 79
Viewing photos or videos in Playback mode
Learn how to play back photos, videos, or voice memos and how to manage files.
Drag the image left or right to move to another file.
Starting Playback mode
View photos or play videos and voice memos stored in your
camera.
2
Press [Playback].
1
•
•
•
To skip files quickly, tilt the camera to the direction you want to
flip files. (p. 82)
You can also touch and hold the left end or right end of the
screen to skip files quickly.
You can also drag the slider left or right to move to the
previous or next file.
•
•
The most recent file will be displayed.
If the camera is off, it will turn on and display the most recent
file.
•
•
To view files by category, touch
To send an email, touch “ Share “ Email. To upload the file to
the web sites, touch “ Share “ an web site.
on the Home screen. (p. 84)
m
m
Playback/Editing 81
Viewing photos or videos in Playback mode
• Motion recognition may not work well if you hold the camera
with the screen parallel to the ground.
•
•
If you want to view files stored in the internal memory, remove your
memory card.
The camera will not properly play back files of unsupported sizes or
files that were captured with other cameras.
Viewing files with motion recognition
You can view files by tilting the camera in Playback mode.
• When you rotate the camera 90° or 180° while you view a
photo, the camera will automatically change the orientation of
the displayed photo. (p.132)
• To deactivate motion recognition, touch m, and then touch the
setting button next to Gesture View.
Playback/Editing 82
Viewing photos or videos in Playback mode
Display in Playback mode
Ranking your favorite faces
You can rank your favorite faces or delete them. The favorite face
feature is available only when you have inserted a memory card
into the camera.
In Playback mode, touch
•
m
“ Face List.
You can also rank your favorite faces in Thumbnail view by
touching “ Face List.
1
m
File Information
File Location
Face List
Icon
Description
Photo includes a voice memo
Play videos (p. 90) or voice memos (p. 92)
Folder name – File name
Video length
Protected file
Print order has been set (DPOF)
Delete files (p. 87)
Upload the current file to Facebook
View files as thumbnails (p. 86)
To display file information on the screen, touch
m, and then touch the setting
button next to File Information.
Playback/Editing 83
Viewing photos or videos in Playback mode
Viewing files in Smart album as thumbnails
To change the rank of a face, touch
drag the face to a new location.
“ Yes, and then
2
View files by category, such as date, face, or file type.
On the Home screen, touch
.
1
2
Edit Ranking
Touch
“ a category option.
Touch
o
to save your changes.
3
•
To delete a face from the list, touch , touch a face, and then
touch
Touch
o.
Icon
Description
to view only your favorite face in the face list.
View all files.
View files by the date they were saved.
View files by recognized faces and favorite faces.
View files by the file type.
•
•
It may take some time for the camera to open Smart album, change
the category, or reorganize files.
If you delete a category, all files in the category will be deleted.
Playback/Editing 84
Viewing photos or videos in Playback mode
Viewing files in 3D view
Viewing files with the page flip effect
You can flip through files by dragging or flicking the touch pen
across the screen. You can also apply a page flip effect to a slide
show.
On the Home screen, touch
.
1
2
Drag images left or right to move to the previous or next
file.
On the Home screen, touch
Touch a theme.
.
1
2
3
•
Flick screen left or right to move files switch quickly. The faster
you flick the screen, the more files you will scroll through at
a time.
Drag images left or right to move to the previous or next
file.
•
•
You cannot play movies or voice memos in 3D view.
The 3D feature is not available while the camera is connected to a TV.
Playback/Editing 85
Viewing photos or videos in Playback mode
Icon
Description
Play a slide show.
•
Touch the screen to pause the slide show and
adjust the volume or mute the sound.
Touch a file to display
it in full screen view.
•
Touch
to stop the slide show.
Return to the theme selection screen.
You can view only photos when you use the page flip effect.
Icon
Description
Delete files
Select files to upload to Facebook
Photo includes a voice memo
Video file
Viewing files as thumbnails
Scan thumbnails of files.
In Playback mode, rotate [Zoom] to the left to view
thumbnails (9 at a time). Rotate [Zoom] to the left once
or twice more to display more thumbnails (16 or 36 at
a time).
Rotate [Zoom] to the right to return to the previous
view.
Voice memo file
Drag the screen up or down to move to the previous or next page of
thumbnails.
Playback/Editing 86
Viewing photos or videos in Playback mode
Protecting files
Deleting files
Protect your files to prevent accidental deletion.
Select files to delete in Playback mode.
In Playback mode, locate the file you want to protect,
1
Deleting a single file
and then touch
m.
You can select one file, and then delete it.
Touch the setting button next to Protect.
2
In Playback mode, locate the file you want to delete, and
1
then touch
.
Delete
When the pop-up message appears, touch Yes.
2
Start Slide Show
Protect
You can also delete a file by touching
m
“ Delete “ Delete “
o.
Resize
Deleting multiple files
You can select multiple files, and then delete them at once.
You cannot delete or rotate a protected file.
In Thumbnail view, touch
.
1
2
3
Select the files you want to delete, and then touch
.
When the pop-up message appears, touch Yes.
Playback/Editing 87
Viewing photos or videos in Playback mode
Deleting all files
Viewing photos
Enlarge part of a photo or view photos as a slide show.
You can select all files, and then delete them at once.
In Playback mode, touch
m
“ Delete.
You can also delete files in Thumbnail view by touching
“ Delete.
Select All, and then touch
1
Enlarging a photo
•
m
In Playback mode, rotate [Zoom] to the right to enlarge
a portion of the photo. Rotate [Zoom] to the left to
zoom out.
o
.
2
3
When the pop-up message appears, touch Yes.
Drag the screen to
see another part of
the photo.
Copying files to a memory card
Copy files from the internal memory to a memory card.
In Playback mode, touch
m.
1
•
You can also copy files to a memory card in Thumbnail view or
in Smart Albumby touching “ Copy to Card.
m
Touch Copy to Card.
2
3
When the pop-up message appears, touch Yes.
Playback/Editing 88
Viewing photos or videos in Playback mode
Playing a slide show
Icon
Description
Apply effects and audio to a slide show of your photos. The slide
show function does not work for videos or voice memos.
Delete the file.
Crop the photo (the camera will save it as a new file).
Return to the original view.
On the Home screen, touch
.
1
2
Zoom ratio (The maximum zoom ratio differs depending on
the photo resolution.)
Touch , and then select individual photos that you
want to include in the slide show.
•
•
•
•
Touch
Touch
to select all.
to cancel your selection.
When you view photos that were captured by another camera, the zoom
ratio may differ.
You cannot select video files.
You can select up to 2,000 files.
Touch
Touch
o
.
3
4
m
, and then set a slide show effect.
All Play
Playback/Editing 89
Viewing photos or videos in Playback mode
* Default
Playing a video
Icon
Description
In Playback mode, you can view a video, and then capture or trim
parts of the playing video. You can save the captured or trimmed
segments as new files.
Play Mode: Set whether or not to repeat the slide show.
(One Play*, Repeat)
Interval:
In Playback mode, locate a video, and then touch
View the video.
.
•
•
Set the interval between photos.
(1 sec*, 3 sec, 5 sec, 10 sec)
1
2
You must set the Effect option to
interval.
to set the
Music: Set background audio.
(Off*, Mist, Drops, Muse, Trip, Fall)
Effect:
•
Set a scene change effect between photos.
(Off*, Calm, Shine, Relax, Lively, Sweet)
Select to cancel effects.
•
•
When you use the Effect option, the interval between
photos will be set to 1 second.
Icon
/
Description
Scan backward.
Touch
to start the slide show.
5
Pause or resume playback.
Scan forward.
•
•
•
Touch the screen to pause the slide show.
Touch
Touch
to adjust the volume or mute the sound.
to stop the slide show.
Adjust the volume or mute the sound.
Return to Playback mode.
Playback/Editing 90
Viewing photos or videos in Playback mode
Trimming a video
Capturing an image from video
While viewing a video, touch at the point where you
want the trimming to begin.
While viewing a video, touch at the point where you
want to capture an image.
1
1
Touch
“
.
Touch
.
2
3
2
3
Touch at the point where you want the trimming to
end.
When the pop-up message appears, touch Yes.
•
•
The file resolution of the captured image will be the same as the
original video.
The captured image is saved as a new file.
•
You can also adjust the scene to be cropped by dragging the
handles that appear on the progress bar.
Touch
.
4
5
When the pop-up message appears, touch Yes.
•
•
The original video should be at least 10 seconds long.
The camera will save the edited video as a new file.
Playback/Editing 91
Viewing photos or videos in Playback mode
Playing voice memos that are attached to photos
Playing a voice memo
In Playback mode, locate a photo that includes a voice
1
2
Listening to a voice memo
memo, and then touch
.
In Playback mode, locate a voice memo file, and then
1
Listen to a voice memo.
touch
.
Listen to the voice memo.
2
Icon
/
Description
Pause or resume playback.
Icon
/
Description
Adjust the volume or mute the sound.
Return to Playback mode.
Scan backward.
Pause or resume playback.
Scan forward.
Adjust the volume or mute the sound.
Return to Playback mode.
Playback/Editing 92
Editing a photo
Learn how to edit photos.
•
•
The camera will save edited photos as new files.
When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to
a lower resolution.
Touch
o
to save.
Resizing photos
Change the size of a photo and save it as a new file. You can also
select a photo to be displayed when the camera turns on.
3
Available resize options differ depending on the original size of the photo.
In Playback mode, locate a photo, and then touch
m.
1
2
Touch Resize, and then select a size option.
•
Select Start Image to save the photo as a start image.
(p. 129)
Resize
2688 X 1512
1920 X 1080
Start Image
Playback/Editing 93
Editing a photo
Rotating a photo
Using Smart Crop
Use Smart Crop to select objects in a photo and save the
cropped area as a new file.
In Playback mode, locate a photo, and then touch
m.
1
Touch Rotate, and then select a rotate option.
2
In Playback mode, locate a photo, and then touch
Touch Smart Crop.
m.
1
2
3
Rotate
Rotate
Touch 4 points on the screen to select an area.
Right 90˚
•
You can re-select the area by dragging the 4 points.
Left 90˚
Touch
o
to save.
3
The camera will overwrite the original file.
Touch
o
to save.
4
•
The cropped photo is saved as a new file.
The size of the new file may be smaller than the original.
Playback/Editing 94
Editing a photo
Applying Smart Filter effects
Adjusting your photos
Apply special effects to your photos.
Learn how to adjust the brightness, contrast, or saturation or how
to correct the red-eye effect. If the center of a photo is dark, you
can adjust it to be brighter. The camera will save an edited photo
as a new file, but may convert it to a lower resolution.
On the Home screen, touch
.
1
•
The most recent file will be displayed.
Touch
Touch
“ a photo.
“ Smart Filter.
•
•
You can adjust brightness, contrast, and saturation and apply Smart
Filter effects at the same time.
You cannot apply the ACB, Face Retouch, and Red-eye Fix effects
at the same time.
2
3
4
m
Select a filter.
•
•
•
To see available filter options, refer to page 73.
To view the original photo, touch Before.
To view the photo with the filter effect, touch After.
Adjusting brightness, contrast, or saturation
On the Home screen, touch
.
1
•
The most recent file will be displayed.
Touch
“ a photo.
“ an adjusting option.
2
3
Touch
m
Icon
Description
Before
After
Brightness
Contrast
Touch
s
to save your changes.
Saturation
5
Playback/Editing 95
Editing a photo
Retouching faces
Drag the slider left or right to adjust the option.
4
5
•
To view the original photo, touch Before.
On the Home screen, touch
.
•
To view the adjusted photo, touch After.
1
•
The most recent file will be displayed.
Touch
s
to save your changes.
Touch
Touch
“ a photo.
“ Face Retouch.
2
3
4
m
Adjusting dark subjects (ACB)
Drag the slider to the left (darker) or right (lighter) to
adjust the skin tone.
On the Home screen, touch
.
1
•
The most recent file will be displayed.
•
•
•
As the slider moves to the right, the skin tone becomes brighter.
To view the original photo, touch Before.
To view the adjusted photo, touch After.
Touch
Touch
“ a photo.
“ ACB.
2
3
m
Touch
s
to save your changes.
5
•
To view the original photo, touch Before.
•
To view the adjusted photo, touch After.
Touch
s
to save your changes.
4
Playback/Editing 96
Editing a photo
Removing red-eye
Touch
touch
/
to select the number of copies, and then
3
o
.
On the Home screen, touch
.
1
•
The most recent file will be displayed.
Touch
Touch
“ a photo.
“ Red-eye Fix.
2
3
m
•
To view the original photo, touch Before.
•
To view the adjusted photo, touch After.
Touch
s
to save your changes.
4
•
•
•
You can take the memory card to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a
DPOF-compatible printer at home.
Photos with dimensions that are wider than the paper may be cut off
on the left and right edges. Ensure that your photo dimensions are
compatible with the paper you select.
Creating a print order (DPOF)
Select photos to print and save print options in the Digital Print
Order Format (DPOF). This information is saved in the MISC
folder on your memory card for convenient printing on DPOF-
compatible printers.
You cannot set DPOF options for photos stored in the internal
memory.
In Playback mode, locate a photo, and then touch
m.
1
2
Touch DPOF.
Playback/Editing 97
Viewing files on a TV
Play back photos or videos by connecting your camera to a TV with the A/V cable.
Turn on your camera.
On the Home screen, touch
.
7
8
1
2
3
•
The camera automatically enters into Playback mode when
you connect it to a TV.
Touch Connectivity “ Video Out.
Select the appropriate video signal output for your
country or region. (p. 130)
Playback the photos or videos using the touch screen
on your camera.
Turn off your camera and TV.
4
5
•
•
Depending on the TV model, you may see some digital noise or part
of an image may not appear.
Images may not be centered on the TV screen depending on your
TV settings.
Connect your camera to your TV with the A/V cable.
Audio
Video
Turn on your TV, and then select a video output mode
with the TV remote control.
6
Playback/Editing 98
Transferring files to your Windows computer
Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web.
Requirements
•
•
The requirements are recommendations only. Intelli-studio may not
work properly even when the computer meets the requirements,
depending on the condition of your computer.
If your computer does not meet the requirements, videos may not play
correctly or it may take longer to edit videos.
Item
CPU
Requirements
Intel Pentium 4, 3.2 GHz or higher/AMD Athlon™ FX
2.6 GHz or higher
•
•
Install DirectX 9.0c or above before you use the program.
Your computer must be running Windows XP, Windows Vista or
Windows 7 for you to connect the camera as a removable disk.
(See p. 102 and p. 104.)
RAM
OS
Minimum 512 MB RAM (1 GB or more recommended)
Windows XP SP2, Windows Vista, or Windows 7
(32-bit editions)
Hard disk
capacity
250 MB or more (1 GB and above recommended)
The manufacturer is not responsible for any damage that results from using
an unqualified computer such as a computer you assembled yourself.
•
•
CD-ROM drive
1024 X 768 pixels, 16-bit color display compatible
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
Others
•
•
USB 2.0 port
nVIDIA Geforce 7600GT or higher/ATI X1600 series
or higher
•
Microsoft DirectX 9.0c or higher
* The programs may not work properly on 64-bit editions of Windows XP,
Windows Vista, and Windows 7.
Playback/Editing 99
Transferring files to your Windows computer
Turn on the camera.
Transferring files with Intelli-studio
5
6
•
The computer recognizes the camera automatically and Intelli-
studio launches automatically.
Intelli-studio will start automatically when you connect the camera
to your computer with the USB cable.
If you set the USB option to Select Mode, select Computer in the
pop-up window.
The battery will charge while the camera is connected to a computer with the
USB cable.
Select a destination folder on your computer, and then
select Yes.
On the Home screen, touch
.
1
2
Touch Connectivity, and then turn on PC Software by
touching the setting button.
•
•
New files stored on the camera will automatically transfer to
the selected folder.
If your camera has no new files, the pop-up window for saving
new files will not appear.
Turn off the camera.
3
4
Connect the camera to your computer with the USB
cable.
For Windows Vista and Windows 7, select Run iStudio.exe from the Auto
Play window to start Intelli-studio.
You must plug the end of the cable with the indicator light ( ) into
S
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Playback/Editing 100
Transferring files to your Windows computer
Using Intelli-studio
Intelli-studio is a built-in program that allows you to play back and edit files. For details, select Help “ Help from the program toolbar.
•
To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support “ Update Intelli-studio “
Start Update from the program toolbar.
•
•
•
•
You can update the firmware of your camera by selecting Web Support “ Upgrade firmware for the connected device from the program toolbar.
If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool “ Install Intelli-studio on PC.
You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
Intelli-studio supports the following formats:
-
-
Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
Photos: JPG, GIF, BMP, PNG, TIFF
1
2
3
4
5
6
7
%
$
#
8
9
0
@
!
Playback/Editing 101
Transferring files to your Windows computer
No.
Description
Transferring files by connecting the camera
as a removable disk
1
Open menus.
2
3
4
Display files in the selected folder.
Switch to the Photo edit mode.
Switch to the Video edit mode.
Connect the camera to your computer as a removable disk.
On the Home screen, touch
.
1
2
Touch Connectivity, and then turn off PC Software by
Switch to the Sharing mode. (to send files by email or
upload files to websites, such as Flickr or YouTube)
5
touching the setting button.
6
7
8
9
0
!
@
#
$
Enlarge or reduce the thumbnails in the list.
Select a file type.
Turn off the camera.
3
4
Connect the camera to your computer with the USB
cable.
View files in the selected folder on your computer.
Show or hide files on the connected camera.
View files in the selected folder on the camera.
View files as thumbnails or on a map.
Browse folders stored on the camera.
Browse folders stored on your computer.
Move to the previous or next folder.
You must plug the end of the cable with the indicator light ( ) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
S
Print files, view files on a map, store files in My Folder, or
register faces.
%
Playback/Editing 102
Transferring files to your Windows computer
Turn on the camera.
5
Disconnecting the camera (for Windows XP)
With Windows Vista and Windows 7, the methods for
disconnecting the camera are similar.
•
The computer recognizes the camera automatically.
If you set the USB option to Select Mode, select Computer in the
pop-up window.
If the status lamp on your camera is blinking, wait until
it stops.
1
On your computer, select My Computer “
Removable Disk “ DCIM “ 100PHOTO.
6
7
Click
computer screen.
on the tool bar at the bottom right of your
2
Drag or save files to your computer.
Click the pop-up message.
3
4
5
Click the message box indicating safely removed.
Remove the USB cable.
The camera may not disconnect safely while Intelli-studio is running. End the
program before disconnecting the camera.
Playback/Editing 103
Transferring files to your Mac computer
When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly
from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.
Connect your camera to a Macintosh computer with the
USB cable.
Turn on the camera.
1
2
•
The computer recognizes the camera automatically and
displays a removable disk icon.
You must plug the end of the cable with the indicator light ( ) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
S
If you set the USB option to Select Mode, select Computer in the
pop-up window.
Double-click the removable disk icon.
Drag or save files to your computer.
3
4
Playback/Editing 104
Printing photos with a PictBridge photo printer
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
Touch
to print.
to print all photos.
On the Home screen, touch
.
7
1
2
3
•
Touch
Touch Connectivity “ USB “ Printer.
Turn on the printer, and then connect your camera to the
printer with the USB cable.
When the pop-up window appears, touch Yes to begin
printing.
8
•
To cancel printing, touch Cancel on the pop-up window.
If the camera is off, press [POWER] or [Playback] to
turn it on.
4
•
The printer recognizes the camera automatically.
Select a file to print.
5
6
Touch
/
to select the number of copies.
. (p. 106)
•
To set printer options, touch
m
Playback/Editing 105
Printing photos with a PictBridge photo printer
Configuring print settings
Touch m to configure print settings.
Size
Layout
Type
Quality
Icon
Description
Size: Set the print size.
Layout: Set the number of photos to be printed on a single
sheet of paper.
Type: Set the type of paper.
Quality: Set the print quality.
Date: Set to print the date.
File Name: Set to print the file name.
Reset: Reset settings to their default values.
Some options may not be supported by some printers.
Playback/Editing 106
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon
Description
Connecting to a WLAN
Ad hoc AP
On the Home screen, touch
,
or
.
1
Secured AP
Boingo hotspot
WPS AP
Touch
.
2
•
The camera automatically searches for available AP devices.
Signal strength
Touch an AP.
3
AP setting options
AP Setting
Connecting WPS AP
Samsung 1
Refreshing connectable APs
Samsung 2
Samsung 3
•
When you select a secured AP, a pop-up window appears.
Input the required passwords to connect to the WLAN
(for information about entering text, refer to page 114).
When you select an unsecured AP, the camera will connect
to the WLAN.
If you select a WPS profile supported AP, touch WPS PIN,
and then enter a PIN on the AP device. You can also connect
to a WPS profile supported AP by touching WPS PBC on the
camera, and then pressing WPS button on the AP device.
Samsung 4
Samsung 5
•
•
Wireless network 108
Connecting to a WLAN and configuring network settings
Setting network options
Manually setting the IP address
On the Home screen, touch
,
or
.
On the Home screen, touch
,
or
.
1
2
1
2
Touch
.
Touch
.
•
The camera automatically searches for available AP devices.
• The camera automatically searches for available AP devices.
Touch next to an AP.
Touch each option and enter the required information.
Touch next to an AP to change settings.
3
4
3
4
5
Touch IP Setting “ Manual.
Option
Description
Touch each option and enter the required information.
Authentication
Data Encryption
Network Key
IP Setting
Select a network authentication type.
Select an encryption type.
Enter the network key.
Option
Description
IP
Enter the static IP address.
Enter the subnet mask.
Enter the gateway.
Subnet Mask
Gateway
DNS Server
Set the IP address manually.
Enter the DNS address.
When you are finished, touch
o.
5
Touch
o
to save your changes.
6
Wireless network 109
Connecting to a WLAN and configuring network settings
• You can use only free WLANs with your camera. If you use free
WLANs that require a user agreement and additional information
when you connect to a web browser, some features may be
limited when connecting to websites or sending email.
Network connection tips
• The quality of the network connection will be determined by
the AP.
• The further the distance between your camera and the AP, the
longer it will take to connect to the network.
• Available network connections may differ by country.
• The WLAN feature of your camera must comply with radio
transmission laws in your region. To ensure compliance, use
the WLAN feature only in the country where you purchased the
camera.
• If a nearby device is using the same radio frequency signal as
your camera, it may interrupt your connection.
• If your AP name is not in English, the camera may not be able
to locate the device or the name may appear incorrectly.
• For network profiles and a password, contact your network
administrator or network service provider.
• For network settings or a password, contact your network
administrator or network service provider.
• The process for adjusting network settings may differ,
depending on network conditions.
• If a WLAN requires authentication from the service provider,
you may not be able to connect to it. To connect the WLAN,
contact your network service provider.
• Do not access a network that you are not authorized to use.
• Before you connect to a network, ensure your battery is fully
charged.
• Depending on the encryption type, the number of digits in the
password may differ.
• When a DHCP server is not available you must make an autoip.
txt file and copy it to the inserted memory card to connect to
the network using Auto IP.
• A WLAN connection may not be possible in all surroundings.
•
The camera may display a WLAN-enabled printer may be
shown on the AP lists. However, you cannot connect to the
network via a printer.
• You cannot connect your camera to a network and a TV
simultaneously. Also, you cannot view photos or videos on a TV
while connected to a network.
• Connecting to a network may incur additional charges. Costs
will vary based on the conditions of your contract.
Wireless network 110
Sending photos via email
You can change settings in the email menu, and send photos stored on the camera via email.
Touch the Email box, input your email address, and then
Changing email settings
4
5
touch
o.
In the email menu, you can change settings for storing your
information or saving email addresses. You can also set or
change the email password. See p. 114 for information about
entering text.
Touch
o
to save your changes.
•
To delete your information, touch
.
Storing your information
Saving email addresses
On the Home screen, touch
.
1
2
3
On the Home screen, touch
.
1
2
3
Touch
m
“ User Setting.
Touch
Touch
m
“ Email Address.
Touch the Name box, input your name, and then touch
to open the email address.
o
.
Email Address Book
User Setting
Name
Email
Touch
Touch
Wireless network 111
Sending photos via email
Changing the email password
Touch the Name box, input a name, and then touch
o.
4
Touch the Email box, input an email address, and then
5
On the Home screen, touch
.
1
2
3
4
5
6
touch
o.
Touch
m
“ Change Password.
Touch
o
to save the new email address.
6
Enter your current 4-digit password.
Enter a new 4-digit password.
•
•
Touch
to add an address.
Touch to delete the address from the list.
Enter the new password again.
Setting an email password
When the pop-up appears, touch Confirm.
On the Home screen, touch
.
1
2
If you do not want to use a password to access email options, touch the
setting button next to Setting Password to deactivate it.
Touch
m, and then touch the setting button
next to Setting Password.
When the pop-up appears, touch Confirm.
Enter a 4-digits password.
3
4
5
6
Enter the password again.
When the pop-up appears, touch Confirm.
Wireless network 112
Sending photos via email
Touch
o.
Sending photos via email
4
5
You can send photos stored on the camera via email.
See p. 114 for information about entering text.
Select photos to send, and then touch
You can select up to 20 photos. The total size must be
10 MB or less.
o.
•
On the Home screen, touch
.
1
2
Touch the Text box, input your comments, and then
touch
6
7
Touch the Sender box, input your email address, and
then touch
o.
o
.
•
For information about entering text, refer to page 114.
•
If you have previously saved your information, it will be inserted
automatically. (p. 111)
Touch Upload to connect to the network and send the
photos.
Touch the Receiver box, input an email address, and
3
•
The camera will automatically attempt to connect to a WLAN
via the most recently connected AP device and send the
photo.
then touch
o.
Sender/Receiver
•
If the camera has not previously been connected to a WLAN,
it will search for available AP devices. (p. 108)
Sender
Touch
Receiver
ABC@samsung.com
Touch
•
•
Touch
to use an address from your address book. (p. 111)
Touch the Touch box to add additional recipients. You can
input up to 10 recipients.
•
Touch
to delete an address from the list.
Wireless network 113
Sending photos via email
Entering text
•
•
You may not be able to send an email if no network connection is
available or if your email account settings are incorrect.
The camera will display the Transfer completed. message, even
when the photos cannot be sent or will be recognized as spam due to
an error with the recipient’s email account.
The maximum photo resolution you can send is . If you select a
photo with resolution that is higher than , it will be automatically
resized.
If you cannot send an email because of firewall or user authentication
settings, contact your network administrator or network service
provider.
When there are no photos in the camera memory, you cannot use
this feature.
Learn how to enter text. The icons in the table below let you move
the cursor, change the case, etc.
Text Input
•
•
•
Icon
Description
Move the cursor.
In ABC mode, change the case.
In 123 mode, view more symbols.
Switch to ABC mode.
Enter a space.
Delete the last letter.
Switch to 123 mode.
Save the displayed text.
o
You can enter only English alphabets, regardless of the display language.
Wireless network 114
Using photo or video sharing websites
Upload your photos or videos to file sharing websites. Available websites will be displayed on your camera.
Accessing a website
Uploading photos or videos
On the Home screen, touch
.
Access the website with your camera, and then touch
Upload.
1
1
Select a website.
2
•
The camera will automatically attempt to connect to a WLAN
Select files to upload from the list, and then touch
o.
2
via the most recently connected AP device.
•
You can select up to 20 photos and the total size must be
10 MB or less.
•
If the camera has not previously been connected to a WLAN,
it will search for available AP devices. (p. 108)
Touch the Comment box, input your comments, and
3
4
Input your ID and password, and then touch Login.
3
then touch
o.
•
You may be logged in automatically, if you have previously
logged in to the website.
Touch Upload.
You must have an existing account on the file sharing website to use this
feature.
•
The maximum photo resolution you can upload is , and the longest
video you can upload is 30 seconds at 320 resolution or a video
recorded using
. If the selected photo resolution is higher than
,
it will be automatically resized to a lower resolution.
The method of uploading photos or videos may differ depending on
the selected website.
•
•
If you cannot access a website because of firewall or user
authentication settings, contact your network administrator or network
service provider.
•
•
•
If you are unable to upload photos or videos due to server errors,
touch Retry.
Uploaded photos or videos may be automatically titled with the date
they were captured.
The speed of your internet connection may affect how quickly photos
upload or web pages open.
Wireless network 115
Using a smart phone as a remote shutter release
The camera connects to a smart phone via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature.
The captured photo will display on the smart phone.
•
•
This feature is supported only by Galaxy S phones with the Android 2.2 OS. If your smart phone uses the Android 2.1 OS, upgrade your smart phone to Android 2.2.
You can download the application from Samsung Apps or Android market.
On your smart phone, turn on the Remote Viewfinder
application.
Icon
Description
1
Flash option
On the Home screen of the camera, touch
.
2
3
Timer option
Photo size
Select your smart phone from the list of available devices
found by the camera.
•
•
•
While using this feature, only the touch screen and [POWER]
are available on your camera.
The zoom button and the shutter button on your smart phone
will not function when using this feature.
Remote Viewfinder mode supports the
sizes only.
•
If the smart phone connected to the camera recently, it will
reconnect to the camera automatically.
•
You can choose only one camera at a time.
On the smart phone, set the following shooting options.
and
photo
4
On the smart phone, touch and hold
to focus.
5
6
•
The focus is automatically set to multi-AF.
Release to capture the photo.
The photo will be saved in your camera.
•
•
Touch the photo in the bottom right corner of the screen to
save it to the smart phone. The photo will be resized to
VGA (640x480) size.
Wireless network 116
Using a smart phone as a remote shutter release
•
•
•
•
When you use this feature, the ideal distance between the camera
and the smart phone may vary, depending on your surroundings.
The smart phone must be within 30 ft/10 m of the camera to use
this feature.
It will take some time to capture the photo after you release
smart phone.
on the
The Remote Viewfinder function will deactivate when:
-
-
-
-
-
there is an incoming call on the smart phone
either of the camera or the smart phone turn off
memory is full
either device loses connection to the WLAN
the Wi-Fi connection is poor or unstable
•
•
To rotate the scene by rotating the smart phone, turn on the rotation
feature on your smart phone.
When you take a self image shot, the display will show a reflected
image, just like a mirror.
Wireless network 117
Viewing photos or videos on AllShare devices
AllShare is an international technology standard for sharing media files between networked devices in your home. With this technology, you
can view your photos or videos on a widescreen TV or another device. You cannot send or receive voice memos.
On the TV, search for the camera and browse the shared
photos or videos.
Viewing photos or videos on a TV screen
4
View your photos or videos on a TV that supports the AllShare
function.
•
•
For information about searching for the camera and browsing
the photos or videos on the TV, refer to the TV user manual.
Videos may not play smoothly depending on the type of TV
or network condition. (p. 55) If this happens, re-record the
video in 640 or 320 quality and play it again. If videos do not
play smoothly on your TV over the wireless connection, try
connecting the camera to the TV with an A/V cable.
On the Home screen, touch
.
1
2
Touch Broadcast files.
•
•
•
The camera will automatically attempt to connect to a WLAN
via the most recently connected AP device.
If the camera has not previously been connected to a WLAN,
it wil search for available AP devices. (p. 108)
To store your camera's name, in AllShare mode, touch
m
“ Device Name, and then input a name by touching the
Device Name box.
Connect your TV to a wireless network via an AP device.
3
•
Refer to your TV’s user manual for more information.
AP
Wireless network 118
Viewing photos or videos on AllShare devices
•
•
You can share up to 1,000 photos.
On a TV screen, you can view only photos or videos captured with
your camera.
•
The range of the wireless connection between your camera and a TV
may vary depending on the specifications of the AP.
If the camera is connected to 2 TVs, playback may be slower.
Photos will be shared according to the size you set.
Videos will be shared in their original sizes.
•
•
•
•
You can use this feature only with a AllShare-enabled Digital Media
Players (DMPs).
•
•
Shared photos or videos will not be stored on the TV, but they can be
stored according to the TV specifications.
Transferring photos or videos to the TV may take some time
depending on the network connection, the number of files to be
shared, or sizes of the files.
•
If you power off the camera abnormally while viewing photos or videos
on a TV (for example, by removing the battery), the TV considers the
camera to still be connected.
•
•
The order of photos or videos on the camera may be different than
on the TV.
Depending on the number of photos or videos you want to share, it
may take some time to load your photos or videos and complete the
initial set-up process.
•
•
•
While viewing photos or videos on the TV, continuously using the TV
remote or performing additional operations on the TV may prevent this
feature from working properly.
If you reorder or sort files on the camera while viewing them on a TV,
you must repeat the initial set-up process to update the list of files
on the TV.
When there are no photos or videos in the camera memory, you
cannot use this feature.
Wireless network 119
Viewing photos or videos on AllShare devices
Viewing photos or videos on another device
(renderer)
•
•
When searching for AllShare-enabled devices in the area, the camera
may not list all available devices.
If you power off the device abnormally while viewing photos or videos
on a device, the camera considers the device to still be connected.
Photos will be shared according to the size you set.
Videos will be shared in their original sizes.
You can use this feature only with an AllShare-enabled renderer.
The shared photos or videos will not be stored on the device, but
some TVs may store photos or videos, depending on its memory
capabilities and settings.
Transferring photos or videos to the device may take some time
depending on the network connection and the file size.
You can transfer files one by one.
When there are no photos or videos in the camera memory, you
cannot use this feature.
On the player (renderer), you can view only photos or videos captured
with your camera.
Network conditions will affect how long the camera searches for
devices. If the search takes an unusually long time, try reconnecting
the camera to the network.
You can view your photos and videos via AllShare on any
renderer-enabled digital media player.
•
•
•
•
On the Home screen, touch
.
1
2
Touch Send files.
•
•
•
The camera will automatically attempt to connect to a WLAN
via the most recently connected AP device.
•
If the camera has not previously been connected to a WLAN,
it will search for available AP devices. (p. 108)
When the camera connects to the WLAN, it automatically
searches for and displays available AllShare-enabled devices
in order of their signal strength. However, searching for all
available devices may take some time.
•
•
•
•
On the device that you will use to display files, activate
AllShare.
3
4
5
From the list on your camera, select the device that you
will display files.
Select photos or videos that you will share.
•
The camera will share the files. Touch Cancel to stop sharing.
Wireless network 120
Sending or receiving photos or videos with another camera
Learn to send or receive photos or videos to or from cameras that support network connections. You cannot send or receive voice memos.
Sending photos or videos to another camera
Receiving photos or videos from another
camera
On the Home screen, touch
.
1
2
On the Home screen, touch
.
1
2
Touch Send.
•
The camera generates a password and displays it on the
On the sending camera, activate the camera to camera
function.
screen while waiting to make a connection with the receiving
camera.
•
To store your camera's name, in Camera to Camera mode,
On the sending camera, select Send, and then on your
camera, touch Receive.
3
4
5
6
touch
m
“ Device Name, and then input a name by
touching the Device Name box.
Select the sending camera from the list of available
devices.
On the receiving camera, activate the camera to camera
function, and then select Receive.
3
4
5
Enter the 4-digit password displayed on the sending
camera.
On the receiving camera, select your camera from the
list of available devices.
On the sending camera, send photos or videos.
On the receiving camera, enter the 4-digit password
displayed on your camera in step 2.
•
Your camera will receive the files from the sending camera.
•
When the connection is made, the selection area
automatically appears on the sending camera.
Select photos or videos to send, and then touch
.
6
•
The camera will send the files.
Wireless network 121
Sending or receiving photos or videos with another camera
•
•
This feature uses an ad hoc wireless network.
If you most recently used your camera to receive files, you must end
the connection and reassign your camera as the sender to send files.
The range of the wireless connection between two cameras may vary,
depending on the conditions of the wireless ad hoc network.
If you power off the camera abnormally while sending or receiving
photos or videos, the other camera considers the camera to still be
connected.
•
•
•
•
Cameras will be disconnected after some time.
Transferring photos or videos to the device may take some time
depending on the network connection and the file size.
If you fail to receive or send a photo or video, it will not be saved on
the receiving camera.
If no photos have been stored on the camera, you cannot use this
feature.
•
•
•
•
•
You can send and receive photos or videos taken with your camera.
Photos larger than
will automatically be resized.
The maximum video file size you can send or receive is 35 MB.
Wireless network 122
Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC or Blu-ray disc player wirelessly. Before sending files to your PC,
connect the camera to the PC with the USB cable, so that the camera can store information about the PC. The Auto Backup feature works
only with the Windows OS.
Select options, and then touch Confirm.
Installing the program for Auto Backup on
your PC
3
4
•
The camera will prepare to connect to the network and send
files.
Connect the camera to the PC with the USB cable.
1
The camera will send files.
•
You cannot select individual files to send. This function is
available only for newly stored files on the camera.
The progress will be shown on the PC monitor.
Turn on the camera.
2
•
The computer recognizes the camera and Intelli-studio
launches automatically.
•
•
If the PC supports the Wake on LAN(WOL) feature, you can turn
on the PC automatically by searching for the PC from your camera.
(p.125)
When the pop-up appears, click
o.
3
•
The program will be installed automatically.
•
•
•
•
•
When you connect the camera to the WLAN, select the AP that is
connected to the PC.
The camera will search for available access points even if you are
connecting to the same access point again.
If you turn off the camera or remove the battery while sending files, the
file transfer will be interrupted.
While you are using this feature, the buttons on the camera will be
disabled.
You can connect only one camera to the PC at a time for sending
files.
•
Before install program, ensure that the PC is connected to a network.
If no internet connection is available, you must install the program from
the provided CD.
This program is for backing up files to the PC. You do not need a
program to send files to the Blu-ray disc player.
•
•
•
The backup may be canceled due to network conditions.
Photos or videos can be sent to a PC or Blu-ray player one time only.
Files cannot be sent again even if you reconnect your camera.
Sending photos or videos to a PC
On the Home screen of your camera, touch
.
1
Touch Confirm.
2
Wireless network 123
Using Auto Backup to send photos or videos
Sending photos or videos to a Blu-ray disc
Player
•
•
Before you backup the files, connect the Blu-ray disc player to a
wired AP. Select Menu “ Settings “ Network “ Network Setting
to view the player’s IP allocation.
Even when you have set the Blu-ray player to be accessed by other
devices, you may be prompted to change the access setting again.
To set the access setting, refer to steps 4 – 5.
This feature works with Samsung Blu-ray players that support Auto
Backup.
The Auto Backup function cannot be used when the Blu-ray player is:
On the Home screen, touch
.
1
2
Touch
to connect to the AP.
•
•
•
Select the AP that is connected to the Blu-ray player.
Search for available devices, and then select your Blu-
ray player.
-
playing back files or access to browser, in My Contents or My
Device menu
upgrading the software
recording files or time-shifting files (reservation recordings will
function normally during automatic backups.)
formatting the player's hard disk or when you are testing the device
or its capabilities
3
4
5
-
-
When the camera is connected to the Blu-ray player and
a pop-up appears on the player's display, select Allow.
-
On the Blu-ray player, select Menu “ Settings “
Network “ AllShare Server Management “ Device
Access Control “ your camera. Then, set the Blu-ray
player to be accessible by other devices.
•
The Blu-ray player will remember the most recent access
settings. If the connection conditions are the same as the last
connection, the camera will automatically access the Blu-ray
player.
Touch Confirm to send files.
6
•
Transferred files will be stored on the hard disk of the Blu-ray
player.
Wireless network 124
About the Wakeup on LAN (WOL) feature
With the WOL feature, you can automatically turn on or wake up a PC with your camera.
Setting the PC to turn on
Setting the PC to wake up from sleep mode
Turn on the PC and press F2 while the PC is booting.
Click Start, and then open the Control Panel.
1
1
2
•
The BIOS setting menu will appear.
Configure the network connection.
Select Advanced tab “ Power management Setup.
Select Resume on PME “ Enabled.
2
3
4
5
6
•
•
•
Windows 7:
Click Network and Internet “ Network and Sharing
Center “ Change adapter settings.
Windows Vista:
Click Network and Internet “ Network and Sharing
Center “ Manage network connections.
Windows XP:
Press F10 to save your changes and continue booting.
Click Start, and then open the Control Panel.
Configure the network connection.
Click Network and Internet Connection “ Network
Connection.
•
•
•
Windows 7:
Click Network and Internet “ Network and Sharing
Center “ Change adapter settings.
Windows Vista:
Click Network and Internet “ Network and Sharing
Center “ Manage network connections.
Windows XP:
Right click Local Area, and then click Properties.
3
4
Click Configure “ the Power manage tab “ Allow this
device to wake the computer.
Click
o.
5
6
Click Network and Internet Connection “ Network
Connection.
Restart the PC.
Select drivers related to network adapter.
7
8
Click Advanced tab and then set WOL menus.
Wireless network 125
About the Wakeup on LAN (WOL) feature
•
•
•
You cannot use this feature across a firewall or if a security program has
been installed.
This feature has been available for Samsung desktop PCs for
the last 5 years(not available for all-in-one PCs).
To turn on the PC with the WOL feature, the PC must have an active
connection to the LAN. Ensure that the indicator light on the PC’s
LAN port is on, which shows that the LAN connection is active.
Depending on your PC model, the camera may only be able to wake
the PC.
•
•
Depending on your PC’s OS or drivers, the names of the WOL setting
menu may vary.
-
-
examples of setting menu names : Enable PME, Wake on LAN etc.
examples of setting menu values : Enable, Magic packet etc.
Any changes to your PC’s BIOS settings other than the ones described below
may damage your PC. The manufacturer is not responsible for damage caused
by your changing your PC’s BIOS settings.
Wireless network 126
Settings menu
Learn to configure your camera's settings.
Touch an item.
Accessing the settings menu
3
4
General
On the Home screen, touch
Touch a menu.
.
1
2
Device Information
English
Home
Language
Settings
Sound
Time Zone
Date/Time Set
Display
Connectivity
General
Select an option, and then touch
o.
Date Type
YYYY/MM/DD
Icon
Description
Sound: Set various camera sounds and the volume.
(p. 129)
MM/DD/YYYY
DD/MM/YYYY
Off
Display: Customize the display settings. (p. 129)
Connectivity: Set the connection options. (p. 130)
General: Change the settings for the camera system
such as memory format and default file name. (p. 131)
Touch
to return to the previous screen.
5
Settings 128
Settings menu
Sound
Display
* Default
* Default
Item
Description
Item
Description
Set the volume of any sound.
(Off, Low, Medium*, High)
Set a start image to display when the camera
turns on.
Volume
•
Off*: Display no start image.
Set to emit sounds when you touch the screen or
switch modes. (Off, On*)
Beep Sound
Shutter Sound
Start Sound
AF Sound
•
Logo: Display a default image stored in the
internal memory.
Set the sound the camera emits when you press
the shutter button. (Off, 1*, 2, 3)
Start Image
•
User Image: Display a custom image. (p. 93)
Set the sound the camera emits when you turn on
your camera. (Off*, 1, 2, 3)
•
The camera will save only one User Image in the
internal memory at a time.
•
If you select a new photo as a User Image or
reset your camera, the camera will delete the
current image.
Set to emit a sound when you half-press the
shutter button. (Off, On*)
Set a grid to help you compose a scene.
(2 X 2*, 3 X 3, X, +)
Grid Line
Settings 129
Settings menu
Connectivity
* Default
* Default
Item
Description
Item
Description
Set the video signal output for your region.
Adjust the brightness of the screen.
(Auto*, Dark, Normal, Bright)
•
NTSC*: USA, Canada, Japan, Korea, Mexico,
Display
Taiwan
Brightness
Normal is fixed in Playback mode even if you have
•
PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland,
Germany, Italy, Kuwait, Malaysia, Netherlands,
New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand
selected Auto.
Video Out
Set the duration for reviewing a captured image
before returning to the Shooting mode.
(Off, 0.5 sec*, 1 sec, 3 sec)
Quick View
Power Save
If you perform no operations for 30 seconds, the
camera automatically switches to Power save
mode. (Off*, On)
Select the mode to use when you connect the
camera to a computer or printer with a USB cable.
•
•
•
Computer*: Connect your camera to a
computer for transferring files.
•
In Power save mode, press any button other
than [POWER] to resume using the camera.
Even if you do not set the Power save mode,
the screen will dim in 30 seconds after the last
operation to save power.
USB
Printer: Connect your camera to a printer for
printing files.
•
Select Mode: Manually select the USB mode
when you connect your camera to a device.
Set Intelli-studio to launch automatically when you
connect your camera to your computer. (Off, On*)
PC Software
Settings 130
Settings menu
General
* Default
* Default
Item
Description
Item
Description
Device
Information
See the Mac address and serial number of your
camera.
Specify how to name files.
•
Reset: Set the file number to start from 0001
when you insert a new memory card, format a
memory card, or delete all files.
Language
Time Zone
Set a language for the display text.
Set the time zone for your location. When you
travel to another country, touch Visit, and then
touch the appropriate time zone.
•
Series*: Set the file number to resume from
the previous file number when you insert a new
memory card, format a memory card, or delete
all files.
Date/Time Set
Date Type
Set the date and time.
Set a date format. (YYYY/MM/DD,
MM/DD/YYYY, DD/MM/YYYY, Off*)
•
•
•
•
•
The default name of the first folder is 100PHOTO
and the default name of the first file is SAM_0001.
The file number increases one at a time from
SAM_0001 to SAM_9999.
The folder number increases one at a time from
100PHOTO to 999PHOTO.
The maximum number of files that can be stored
in one folder is 9,999.
The camera defines file names according to
the Design rule for Camera File system (DCF)
standard. If you intentionally change file names,
the camera may not play back the files.
File No.
Settings 131
Settings menu
* Default
* Default
Item
Description
Item
Description
Set to automatically rotate photos as you rotate
the camera. (Off, On*)
Set a light to automatically turn on in dark places
to help the camera focus. (Off, On*)
Auto Rotate
AF Lamp
Set to display the date and time on captured
photos. (Off*, Date, Date & Time)
Format the internal memory and the memory card
(formatting will delete all files, including protected
files). (Yes, No)
•
•
•
The date and time will be displayed on the
bottom right corner of the photo.
Some printer models may not print the date and
time properly.
If you select Text in Scene mode, the camera
will not display the date and time.
Format
Errors can occur if you use a memory card formatted
by another brand of camera, a memory card reader,
or a computer. Please format memory cards in the
camera before using them to capture photos.
Imprint
Reset menus and shooting options (date and time,
language, and video output settings will not be
reset). (Yes, No)
Set the camera to automatically turn off when you
perform no operations for a specified period.
(Off, 1 min, 3 min*, 5 min, 10 min)
Reset
Touch
Calibration
Calibrate the touch screen so that your camera will
properly recognize your inputs.
•
Your settings will not change when you replace
the battery.
Auto Power Off
•
The camera will not automatically turn off when
the camera is connected to a computer or
printer, when you are playing a slide show or
videos, and when you are recording a voice
memo.
Settings 132
Error messages
When the following error messages appear, try these remedies.
Error message
Suggested remedies
Error message
Suggested remedies
•
•
•
Turn off your camera, and then turn it on
again.
•
Turn on AllShare enabled devices on the
network.
Initialization failed.
Card Error
Remove your memory card, and then insert
it again.
•
The camera has failed to locate an AllShare-
enabled device.
Format your memory card.
The password for transferring files to another
camera is wrong. Enter the correct password
again.
Invalid password.
The inserted memory card is not supported by
your camera. Insert a microSD or microSDHC
memory card.
Card not
supported.
Low Battery
Memory Full
Insert a charged battery or recharge the battery.
•
The camera cannot connect to the network
using the selected access point. Select
another and try again.
Delete unnecessary files or insert a new memory
card.
Connection failed.
Capture photos or insert a memory card that
contains some photos.
•
The camera fails to connect to the other
camera. Try connecting again.
No Image File
The camera has failed to receive a photo from
the sending camera. Ask the other person to
send the file again.
File names do not match the DCF standard.
Transfer the files on the memory card to your
computer, and then format the card.
Photo transfer
failed.
DCF Full Error
File Error
Network connection disconnected while
transferring photos. Try turning on the AllShare
feature again.
Delete the damaged file or contact a service
center.
Photo reception
failed.
Your camera does not support the FAT file
structure of the inserted memory card. Format
the memory card on the camera.
File system not
supported.
Appendixes 134
Camera maintenance
Camera body
Cleaning your camera
Wipe gently with a soft, dry cloth.
Camera lens and touch screen
Use a blower brush to remove dust and wipe the lens gently with
a soft cloth. If any dust remains, apply lens cleaning liquid to a
piece of lens cleaning paper and wipe gently.
•
•
Never use benzene, thinners, or alcohol to clean the camera. These
solutions can damage the camera or cause it to malfunction.
Do not press on the lens cover or use a blower brush on the lens
cover.
Appendixes 135
Camera maintenance
Using on beaches or shores
Using or storing the camera
• Protect your camera from sand and dirt when you use it on
beaches or in other similar areas.
Inappropriate places to use or store the camera
• Your camera is not waterproof. Do not handle the battery,
adapter, or memory card with wet hands. Operating the camera
with wet hands may cause damage to your camera.
• Avoid exposing the camera to very cold or very hot
temperatures.
• Avoid using your camera in areas with extremely high humidity,
or where the humidity changes drastically.
•
Avoid exposing the camera to direct sunlight and storing it in hot,
poorly-ventilated areas, such as in a car during summertime.
Storing for extended period of time
• When you store the camera for an extended period, place it in a
sealed container with an absorbent material, such as silica gel.
• Protect your camera and the display from impact, rough
handling, and excessive vibration to avoid serious damage.
• Remove the batteries from your camera when storing it for an
extended period. Installed batteries may leak or corrode over
time and cause serious damage to your camera.
• Avoid using or storing your camera in dusty, dirty, humid, or
poorly-ventilated areas to prevent damage to moving parts and
internal components.
• Over time, unused batteries will discharge and must be
recharged before use.
• Do not use your camera near fuels, combustibles, or flammable
chemicals. Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the camera or
its accessories.
Use the camera with caution in humid environments
• Do not store the camera where there are mothballs.
When you transfer the camera from a cold environment to a warm
one, condensation can form on the lens or internal components
of the camera. In this situation, turn off the camera and wait for at
least 1 hour. If condensation forms on the memory card, remove
the memory card from the camera and wait until all moisture has
evaporated before reinserting it.
Appendixes 136
Camera maintenance
• Paint or metal on the outside of the camera may cause
allergies, itchy skin, eczema, or swelling for people with
sensitive skin. If you experience any of these symptoms, stop
using the camera immediately and consult a doctor.
Other cautions
• Do not swing your camera by the strap. This may cause injury
to yourself or others or damage to your camera.
• Do not paint your camera, as paint can clog moving parts and
prevent proper operation.
• Do not insert foreign objects into any of your camera’s
compartments, slots, or access points. Damage due to
improper use may not be covered by your warranty.
• Turn off the camera while not in use.
• Your camera consists of delicate parts. Avoid impacts to the
camera.
• Do not allow unqualified personnel to service the camera or
attempt to service the camera yourself. Any damage that results
from unqualified service is not covered by your warranty.
• Protect the display from external force by keeping it in the case
when not in use. Protect the camera from scratches by keeping
it away from sand, sharp implements, or loose change.
• Do not expose the lens to direct sunlight, as this may discolor
the image sensor or cause it to malfunction.
About memory cards
• Protect your lens from fingerprints and scratches. Clean your
lens with a soft, clean, debris-free lens cloth.
Supported memory cards
• The camera may turn off if subjected to a sudden impact.
This is to protect the memory card. Turn on the camera to use
it again.
Your camera supports microSD (Secure Digital) or microSDHC
(Secure Digital High) memory cards.
• While you use the camera, it may heat up. This is normal and
should not affect your camera’s lifespan or performance.
To read data with a PC or memory card reader,
insert the memory card into a memory card adapter.
• When you use the camera in low temperatures, it may take
some time to turn on, the screen color may be changed
temporarily, or after-images may appear. These conditions are
not malfunctions and they will correct themselves when the
camera is returned to normal temperatures.
Appendixes 137
Camera maintenance
Memory card capacity
Cautions when using memory cards
The memory capacity may differ from the the capacities listed
below depending on the scenes you shoot or the shooting
conditions. These capacities are based on a 1 GB microSD card:
• Insert a memory card in the correct direction. Inserting a
memory card in the wrong direction may damage your camera
and memory card.
• Do not use memory cards that have been formatted by other
cameras or by a computer. Reformat the memory card with
your camera.
Size
Super Fine
119
Fine
233
Normal
343
30 FPS
15 FPS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
133
260
380
• Turn off the camera when you insert or remove the memory
card.
P
h
o
t
o
s
159
311
458
• Do not remove the memory card or turn off your camera while
the lamp is blinking, as this may damage your data.
166
323
469
319
607
858
• When the lifespan of a memory card has expired, you cannot
store any more photos on the card. Use a new memory card.
522
954
1,336
1,878
3,006
• Do not bend, drop, or subject memory cards with heavy impact
or pressure.
742
1,336
2,505
1,582
• Avoid using or storing memory cards near strong magnetic
fields.
Approx.
13' 08"
Approx.
14' 55"
Approx.
34' 55"
Approx.
Approx.
22' 57"
Approx.
28' 54"
Approx.
65' 40"
Approx.
-
-
-
-
-
-
-
-
-
-
-
-
• Avoid using or keeping memory cards in areas with high
temperature, high humidity, or corrosive substances.
*
V
i
• Prevent memory cards from making contact with liquids, dirt, or
foreign substances. If dirty, wipe the memory card clean with a
soft cloth before you insert the memory card in your camera.
d
e
o
s
134' 34" 231' 14"
• Do not allow liquids, dirt, or foreign substances to come in
contact with memory cards or the memory card slot. Doing so
may cause memory cards or the camera to malfunction.
Approx.
-
-
-
-
134' 34"
* Available recording time may vary if you use the zoom. Several videos were
recorded in succession to determine the total recording time.
Appendixes 138
Camera maintenance
• When you carry a memory card, use a case to protect the card
from electrostatic discharges.
Battery life
Average shooting time /
Number of photos
Test conditions
(when the battery is fully charged)
• Transfer important data to other media, such as a hard disk,
CD, or DVD.
• When you use the camera for an extended period, the memory
card may become warm. This is normal and does not indicate
a malfunction.
This is measured under the following
conditions: in Program mode, at
resolution, with DIS off, on Fine quality.
1. Set the flash option to Fill in, take a
single shot, and zoom in or out.
The manufacturer is not responsible for any loss of data.
Approximately
110 min/
Approximately
220 photos
Photos
2. Set the flash option to Off, take a
single shot, and zoom in or out.
3. Perform steps 1 and 2 for 30
seconds and repeat for 5 minutes.
Then turn off the camera for 1 minute.
About the battery
Use only Samsung-approved batteries.
4. Repeat steps 1 to 3.
Approximately
Videos
Record videos at 1280 X 720 HQ
resolution and 30 FPS.
Battery specifications
90 min
Specification
Model
Description
BP85A
•
•
•
The figures above are measured using Samsung’s standards. Your reslults may
differ, depending on your actual usage.
Several videos were recorded in succession to determine the total recording
time.
Type
Lithium-ion battery
850 mAh
When using network functions, the battery will be depleted more quickly.
Cell capacity
Voltage
3.7 V
Charging time*
(when the camera is switched off)
Approximately 180 min
* Charging the battery by connecting it to a computer may take longer.
Appendixes 139
Camera maintenance
Low battery message
Cautions about using the battery
When the battery has fully discharged, the battery icon will turn
red and the "Low Battery" message will appear.
Protect batteries, chargers, and memory cards from
damage
Prevent batteries from making contact with metal objects, as this
can create a connection between the + and – terminals of your
battery and lead to temporary or permanent battery damage and
may cause a fire or electric shock.
Notes about using the battery
• Avoid exposing batteries or memory cards to very cold or very
hot temperatures (below 0 ºC/32 ºF or above 40 ºC/104 ºF).
Extreme temperatures can reduce the charging capacity of your
batteries and can cause memory cards to malfunction.
Notes about charging the battery
• If the indicator light is off, make sure that the battery is inserted
correctly.
• When you use the camera for an extended period, the area
around the battery chamber may become warm. This does not
affect the normal use of the camera.
• If the camera is on while battery is charging, the battery may not
fully charge. Turn off the camera before charging the battery.
• Do not pull the power supply cord to disconnect the plug from
the power outlet, as this may cause a fire or electric shock.
• Do not use your camera when you charge the battery. This may
cause a fire or electric shock.
• In temperatures below 0 ºC/32 ºF, battery capacity and battery
life may decrease.
• Do not pull the power supply cord to disconnect the plug from
the power outlet, as this may cause a fire or electric shock.
• Battery capacity may decrease in low temperatures but will
return to normal in milder temperatures.
• Let the battery charge for at least 10 minutes before turning on
the camera.
• If you connect the camera to an external power source while
the battery is depleted, using some high energy-consuming
functions will cause the camera to turn off. To use the camera
normally, recharge the battery.
Appendixes 140
Camera maintenance
• Using the flash or recording videos depletes the battery quickly.
Charge the battery until the indicator light turns green.
Handle and dispose of batteries and chargers with care
• Never dispose of batteries in a fire. Follow all local regulations
when you dispose of used batteries.
• If the indicator light blinks in orange or does not illuminate,
reconnect the cable, or remove the battery and insert it again.
• Never place batteries or cameras on or in heating devices,
such as microwave ovens, stoves, or radiators. Batteries may
explode when they are overheated.
• If you charge the battery when the cable is overheated or the
temperature is too high, the indicator light may turn orange.
Charging will start when the battery cools down.
• Overcharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.
• Do not bend or place heavy objects on the AC cable. Doing so
may damage the cable.
Notes about charging with a computer connected
• Use only the provided USB cable.
• The battery may not charge when:
-
-
-
you use a USB hub
other USB devices are connected to your computer
you connect the cable to the port on the front side of your
computer
-
the USB port of your computer does not support the power output
standard (5 V, 500 mA)
Appendixes 141
Camera maintenance
Personal injury or death can occur if the battery is
handled carelessly or improperly. For your safety,
follow these instructions for proper battery handling:
•
•
•
•
•
•
Do not disassemble the battery or puncture the it with
any sharp object.
Avoid exposing the battery to high pressure or crushing
forces.
•
The battery can ignite or explode if not handled properly. If
you notice any deformities, cracks, or other abnormalities
in the battery, immediately discontinue use of the battery
and contact a service center.
Avoid exposing the battery to major impacts, such as
dropping it from high places.
Do not expose the battery to temperatures of 60 °C
(140 °F) or above.
•
•
Use only authentic, manufacturer-recommend battery
chargers and adapters and charge the battery only by the
methods described in this user manual.
Do not allow the battery to come in contact with moisture
or liquids.
Do not place the battery near heating devices or expose
it to excessively warm environments, such as the inside
of an enclosed car in the summertime.
Do not expose the battery to sources of excessive heat
such as direct sunshine, fire or the like.
•
•
Do not place the battery in a microwave oven.
Disposal guidelines
Avoid storing or using the battery in hot, humid places,
such as spas or shower enclosures.
•
•
•
Dispose of the battery with care.
Do not dispose of the battery in a fire.
•
Do not rest the device on flammable surfaces, such as
bedding, carpets, or electric blankets for a prolonged
period.
Disposal regulations may differ by country or region.
Dispose of the battery in accordance with all local and
federal regulations.
•
•
When the device is switched on, do not leave it in any
confined space for a prolonged period.
Guidelines for charging the battery
Charge the battery only by the method described in this
user manual. The battery can ignite or explode if not
charged properly.
Do not allow battery terminals to come in contact with
metallic objects, such as necklaces, coins, keys, or
watches.
•
Use only authentic, manufacturer-recommended, Lithium-
ion replacement batteries.
Appendixes 142
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted
the suggested remedy and are still having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Situation
Suggested remedies
Situation
Suggested remedies
•
•
Ensure that the battery is inserted.
•
There is no space on the memory card.
Delete unnecessary files or insert a new
card.
Cannot turn on the
camera
Ensure that the battery is inserted
correctly. (p. 18)
•
•
Format the memory card.
•
•
•
Charge the battery.
Charge the battery.
The memory card is defective. Get a new
memory card.
Cannot capture photos
Your camera may be in Power save
mode. (p. 132)
•
Make sure that the camera is switched
on.
The power turns off
suddenly
•
•
The camera may turn off to prevent the
memory card from being damaged due
to an impact. Turn on your camera again.
•
•
Charge the battery.
Make sure that the battery is inserted
correctly.
The battery may lose power more quickly
in low temperatures (below 0 °C). Keep
the battery warm by putting it into your
pocket.
The camera freezes
The camera heats up
Remove the battery and insert it again.
While you use the camera, it may heat up.
This is normal and should not affect your
camera’s lifespan or performance.
The camera is losing
battery power quickly
•
•
Using the flash or recording videos
depletes the battery quickly. Recharge
if needed.
•
•
The flash option may be set to off. (p. 57)
You cannot use the flash in some modes.
The flash does not
work
Batteries are consumable parts that must
be replaced over time. Get a new battery
if the battery life is diminishing quickly.
Appendixes 143
Before contacting a service center
Situation
Suggested remedies
Situation
Suggested remedies
•
•
•
Make sure that the focus option you set
is suitable for close-up shots. (p. 60)
The flash fires
unexpectedly
The flash may fire due to static electricity.
The camera is not malfunctioning.
Make sure that the lens is clean. If not,
clean the lens. (p. 135)
The date and time are
incorrect
Set the date and time in the display settings.
(p. 131)
The photo is blurry
Make sure that the subject is within range
of the flash. (p. 146)
The touch screen or
buttons do not work
Remove the battery and insert it again.
An incorrect white balance can create
unrealistic color. Select the proper white
balance option to suit the light source.
(p. 70)
If you use your camera at very low
The colors in the photo
do not match the actual
scene
temperatures, it may cause the camera
screen to malfunction or discolor. For better
performance of your camera screen, use
your camera in moderate temperatures.
The camera screen
responds poorly
Your photo is overexposed.
•
•
•
Turn off the flash. (p. 57)
•
•
•
Turn off your camera and then turn it on
again.
The photo is too bright
The photo is too dark
Adjust the ISO sensitivity. (p. 59)
Adjust the exposure value. (p. 68)
Remove your memory card and insert
it again.
The memory card has
an error
Your photo is underexposed.
Format your memory card.
•
•
•
Turn on the flash. (p. 57)
See “Cautions when using memory cards”
for more detail. (p. 138)
Adjust the ISO sensitivity. (p. 59)
Adjust the exposure value. (p. 68)
If you change the name of a file, your
camera may not play the file (the name of
the file should meet the DCF standard). If
you encounter this situation, play back the
files on your computer.
Cannot play back files
Appendixes 144
Before contacting a service center
Situation
Suggested remedies
Situation
Suggested remedies
•
•
•
•
•
Make sure that the camera is correctly
connected to the TV with the A/V cable.
•
•
End Intelli-studio and restart the program.
The TV does not
display your photos
You cannot use Intelli-studio on
Macintosh computers.
Make sure that your memory card
contains photos.
•
•
Make sure that PC Software is turned
on in the settings menu. (p. 130)
Make sure that the USB cable is
connected correctly.
Intelli-studio is not
functioning properly
Depending on your computer's
specifications and environment, the
program may not launch automatically. In
this case, click Start “ My Computer
“ Intelli-studio “ iStudio.exe on your
computer.
Your computer does
not recognize your
camera
Make sure that your camera is switched
on.
Make sure that you are using a supported
operating system.
Your computer
disconnects the
camera while
The file transmission may be interrupted by
static electricity. Disconnect the USB cable
and connect it again.
transferring files
Videos may not play on some video player
Your computer cannot programs. To play video files captured with
play videos
your camera, install and use the Intelli-studio
program on your computer. (p. 100)
Appendixes 145
Camera specifications
Image sensor
Wide (W)
80 cm-infinity
5 cm-80 cm
5 cm-infinity
Tele (T)
Type
1/2.3" (Approximately 7.76 mm) CCD
Approximately 14.2 mega-pixels
Approximately 14.48 mega-pixels
Normal (AF)
Macro
150 cm-infinity
100 cm-150 cm
100 cm-infinity
Range
Effective pixels
Total pixels
Lens
Auto Macro
Shutter speed
•
•
•
Smart Auto: 1/8-1/2,000 sec.
Program: 1-1/2,000 sec.
Night Shot: 8-1/2,000 sec.
Samsung Lens f = 4.7 mm-23.5 mm
(35 mm film equivalent: 26 mm-130 mm)
Focal length
F-stop range
F3.3 (W)-F5.9 (T)
Exposure
Control
•
•
Still image mode: 1.0X-5.0X
(Optical Zoom x Digital Zoom: 25.0X)
Program AE
Digital zoom
Playback mode: 1.0X-14.4X
Metering
Multi, Spot, Center-weighted, Face Detection
2EV (1/3 EV Step)
Display
Type
Compensation
TFT LCD
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200
ISO equivalent
Feature
Focusing
3.0" (7.6 cm) WQVGA, 230K
Flash
Mode
Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix
TTL auto focus (Multi AF, Center AF, Smart Face
Recognition AF, Face Detection AF, Smart Touch AF,
One Touch Shooting AF)
Type
•
•
Wide: 0.2 m-3.2 m (ISO Auto)
Tele: 0.5 m-1.8 m (ISO Auto)
Range
Recharging time
Approximately 4 sec.
Appendixes 146
Camera specifications
Digital Image Stabilization (DIS)
Digital Image Stabilization (DIS)
Effect
Shooting
•
Modes: Smart Auto*, Program, Scene*,
Simple Shot, Magic Frame shot, Beauty Shot,
Object Highlight, Night Shot, Close Up, Vignetting,
Photo Filter
•
Photo Filter (Smart Filter): Normal, Miniature,
* Smart Auto:
Vignetting, Soft-Focus, Old Film 1, Old Film 2,
Half Tone Dot, Sketch, Fish-eye, Defog, Classic,
Retro, Negative, (Custom RGB)
Photo Shooting
mode
Macro, Macro text, Portrait, White, Landscape,
Action, Tripod, Night, Night Portrait, Backlight,
Backlight Portrait, Blue Sky, Sunset, Macro Color,
Natural Green, Fireworks
Photos
•
•
Image Adjust: Sharpness, Contrast, Saturation
Palette Effect: Palette Effect 1, Palette Effect 2,
Palette Effect 3, Palette Effect 4
* Scene:
Landscape, Text, Sunset, Dawn, Backlight,
Beach & Snow
Drive: Single, Continuous, Motion Capture, AEB
Video Shooting
mode
•
Movie Filter (Smart Filter): Normal, Miniature,
Vignetting, Half Tone Dot, Sketch, Fish-eye, Defog,
Classic, Retro, Negative, (Custom RGB)
•
•
Timer: 2 Sec, 10 Sec, Double (2 sec., 10 sec.)
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,
Custom Set
Date Imprinting
Date & Time, Date, Off
Appendixes 147
Camera specifications
•
Modes: Movie, Smart movie*, Vignetting
Movie Filter, Palette Effect
,
•
•
Image Adjust: Face Retouch, Brightness,
Saturation, Contrast, Red-eye Fix, ACB
* Smart movie:
Smart Filter: Normal, Miniature, Vignetting,
Soft-Focus, Old Film 1, Old Film 2, Half Tone Dot,
Sketch, Fish-eye, Defog, Classic, Retro, Negative,
Custom RGB
Effect
Landscape, Blue Sky, Natural Green, Sunset
Format: MP4 (H.264)(Maximum recording time:
20 min)
•
•
Size: 1280 X 720 HQ (30 FPS, 15 FPS),
1280 X 720 (30 FPS, 15 FPS), 640 X 480
(30 FPS, 15 FPS), 320 X 240 (30 FPS, 15 FPS),
320 X 240 WEB (30 FPS)
Voice recording
Videos
•
•
Voice Recording (Maximum 10 hours)
Voice Memo in a photo (Maximum 10 sec.)
•
•
•
Frame rate: 30 FPS, 15 FPS
Storage
Voice: Mute, Sound Alive On, Sound Alive Off
•
•
Internal memory: Approximately 6.9 MB
Video editing (embedded): Pause during recording,
Still image capture, Time trimming
External memory (Optional): microSD card (up to
2 GB guaranteed), microSDHC card (up to 8 GB
guaranteed)
Media
Playback
Single image, Thumbnails, Multi-slide show with music
and effect, Movie clip, Smart Album*, 3D Album,
Magazine
Internal memory capacity may not match these
specifications.
Type
Edit
•
•
•
DCF, EXIF 2.21, DPOF 1.1, PictBridge 1.0
Still Image: JPEG (DCF)
* Smart Album category: Type, Date, Face
Resize, Rotate, Image Adjust, Smart Filter, Trim,
Smart Crop
File format
Movie Clip: MP4 (Video: MPEG-4.AVC/H.264,
Audio: AAC)
•
Audio file: WAV
Appendixes 148
Camera specifications
Video output
A/V: NTSC, PAL (selectable)
20 pin, 4.2 V
For 1 GB microSD: Number of photos
Super Fine
119
Fine
233
Normal
343
DC power input
connector
4320 X 3240
4320 X 2880
4320 X 2432
Power source
133
159
260
311
380
458
Rechargeable
battery
Lithium-ion battery (BP85A, 850 mAh)
3648 X 2736
2592 X 1944
1984 X 1488
1920 X 1080
1024 X 768
166
319
323
607
469
858
The power source may differ depending on your region.
Dimensions (W x H x D)
93 X 53.9 X 18.9 mm (without protrusions)
Weight
Image size
522
954
1,336
1,878
3,006
742
1,336
2,505
1,582
110.2 g (without battery and memory card)
Operating Temperature
0-40 °C
These figures are measured under Samsung’s
standard conditions. Your results may vary depending
on the shooting conditions and camera settings.
Wireless network
Operating Humidity
Wi-Fi (IEEE 802.11 b/g/n), AllShare, Web Upload, Emailing, Camera to
Camera, AP Connection, Auto Backup, Remote Viewfinder
5-85 %
Software
Interface
Intelli-studio, PC Auto Backup
Digital output
USB 2.0
connector
Specifications may change without notice to improve performance.
Audio input/output Internal speaker (Mono), Microphone (Mono)
Appendixes 149
Glossary
ACB (Auto Contrast Balance)
Composition
This feature automatically improves the contrast of your images
when the subject is backlit or when there is a high contrast
between your subject and the background.
Composition in photography means arranging objects in a photo.
Usually, abiding by the rule of thirds leads to a good composition.
DCF (Design rule for Camera File system)
AEB (Auto Exposure Bracket)
A specification to define a file format and file system for digital
cameras created by the Japan Electronics and Information
Technology Industries Association (JEITA).
This feature automatically captures several images at different
exposures to help you capture a properly exposed image.
AF (Auto Focus)
Depth of field
A system that automatically focuses the camera lens on the
subject. Your camera uses the contrast to focus automatically.
The distance between the nearest and farthest points that can
be acceptably focused in a photograph. Depth of field varies with
lens aperture, focal length, and distance from the camera to the
subject. Selecting a smaller aperture, for example, will increase
the depth of field and blur the background of a composition.
Aperture
The aperture controls the amount of light that reaches the
camera’s sensor.
Digital zoom
A feature that artificially increases the amount of zoom available
with a zoom lens (Optical zoom). When using the Digital zoom,
the image quality will deteriorate as the magnification increases.
Camera shake (Blur)
If the camera is moved while the shutter is open, the entire image
may appear blurred. This occurs more often when the shutter
speed is slow. Prevent camera shake by raising the sensitivity,
using the flash, or using a faster shutter speed. Alternately, use a
tripod, the DIS or OIS function to stabilize the camera.
DPOF (Digital Print Order Format)
A format for writing printing information, such as selected images
and number of prints, on a memory card. DPOF-compatible
printers, sometimes available at photo shops, can read the
information from the card for convenient printing.
Appendixes 150
Glossary
EV (Exposure Value)
Focal length
All the combinations of the camera’s shutter speed and lens
aperture that result in the same exposure.
The distance from the middle of the lens to its focal point
(in millimeters). Longer focal lengths result in narrower angles of
view and the subject is magnified. Shorter focal lengths result in
wider angles of view.
EV Compensation
This feature allows you to quickly adjust the exposure value
measured by the camera, in limited increments, to improve the
exposure of your photos. Set the EV compensation to -1.0 EV to
adjust the value one step darker and 1.0 EV to one step brighter.
Histogram
A graphical representation of the brightness of an image. The
horizontal axis represents the brightness and the vertical axis
represents the number of pixels. High points at the left (too dark)
and right (too bright) on the histogram indicate a photo that is
improperly exposed.
Exif (Exchangeable Image File Format)
A specification to define an image file format for digital cameras
created by the Japan Electronic Industries Development
Association (JEIDA).
H.264/MPEG-4
A high-compression video format established by international
standard organizations ISO-IEC and ITU-T. This codec is capable
of providing good video quality at low bit rates developed by the
Joint Video Team (JVT).
Exposure
The amount of light allowed to reach the camera’s sensor.
Exposure is controlled by a combination of the shutter speed, the
aperture value, and ISO sensitivity.
Image sensor
The physical part of a digital camera that contains a photosite for
each pixel in the image. Each photosite records the brightness of
the light that strikes it during an exposure. Common sensor types
are CCD (Charge-coupled Device) and CMOS (Complementary
Metal Oxide Semiconductor).
Flash
A speed light that helps to create adequate exposure in low-light
conditions.
Appendixes 151
Glossary
ISO sensitivity
MJPEG (Motion JPEG)
The sensitivity of the camera to light, based on the equivalent film
speed used in a film camera. At higher ISO sensitivity settings,
the camera uses a higher shutter speed, which can reduce blur
caused by camera shake and low light. However, images with
high sensitivity are more susceptible to noise.
A video format which is compressed as a JPEG image.
Noise
Misinterpreted pixels in a digital image that may appear as
misplaced or random, bright pixels. Noise usually occurs when
photos are shot with a high sensitivity or when a sensitivity is
automatically set in a dark place.
JPEG (Joint Photographic Experts Group)
A lossy method of compression for digital images. JPEG images
are compressed to reduce their overall file size with minimal
deterioration of the image resolution.
Optical zoom
This is a general zoom which can enlarge images with a lens and
does not degrade image quality.
LCD (Liquid Crystal Display)
A visual display commonly used in consumer electronics. This
display needs a separate backlight, such as CCFL or LED, to
reproduce colors.
Quality
An expression of the rate of compression used in a digital image.
Higher quality images have a lower rate of compression, which
usually results in a larger file size.
Macro
This feature allows you to capture close-up photos of very small
objects. When using the macro feature, the camera can maintain
a sharp focus on small objects at a near life-size ratio (1:1).
Resolution
The number of pixels present in a digital image. High resolution
images contain more pixels and typically show more detail than
low resolution images.
Metering
The metering refers to the way in which the camera measures the
quantity of light to set the exposure.
Appendixes 152
Glossary
Shutter speed
Shutter speed refers to the amount of time it takes to open and
close the shutter, and it is an important factor in the brightness of
a photo, as it controls the amount of light which passes through
the aperture before it reaches the image sensor. A fast shutter
speed allows less time to let light in and the photo becomes
darker and more easily freezes subjects in motion.
Vignetting
A reduction of an image’s brightness or saturation at the periphery
(outer edges) compared to the center of the image. Vignetting
can draw interest to subjects positioned in the center of an
image.
White balance (color balance)
An adjustment of the intensities of colors (typically the primary
colors red, green, and blue), in an image. The goal of adjusting
the white balance, or color balance, is to correctly render the
colors in an image.
Appendixes 153
Correct Disposal of This Product
Correct disposal of batteries in this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate battery return systems)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can
take these items for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should
not be mixed with other commercial wastes for disposal.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
This Class [B] digital apparatus complies with Canadian
ICES-003.
PlanetFirst represents Samsung Electronics'
commitment to the sustainable development and
social responsibility through eco-driven business and
management activities.
Appendixes 154
FCC notice
•
Declaration of Conformity
FCC ID:A3LSH100
Trade Name
: Samsung Electronics America, Inc.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Model No.
: Samsung SH100
Responsible Party
Address
: Samsung Electronics America, Inc.
: 85 Challenger Road, Ridgefield Park,
NJ 07660
Caution:
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Telephone No.
: 1-800-SAMSUNG (726-7864)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
RF exposure statements:
This device is for handheld operation only. The antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
Appendixes 155
Numéro d’agrément:
MR 5905 ANRT 2010
Complies with
IDA Standards
DA100790
Approved by PTA,
year 2010
CAUTION
Date d’agrément:
17/12/2010
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
TA-2010/1576
APPROVED
No.: ESD-1004942C
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution:
Any changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void
user’s authority to operate the equipment.
IC: 649E-SH100
This equipment may be operated in all EU countries.
In France, this equipment may only be used indoors.
Appendixes 156
Declaration of Conformity
EN 55022:2006+A1 :2007
EN 300 328-1 v1.7.1
EN 301 489-1 v1.8.1:2008
EN 301 489-17 v2.1.1:2009
Product details
For the following
and the Eco-Design Directive (2009/125/EC) implemented
by Regulations (EC) No 1275/2008 for standby and off mode
electric power consumption and (EC) No 278/2009 for external
power supplies.
Product : DIGITAL CAMERA
Model(s) : SAMSUNG SH100
Manufactured at:
Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
416, Maetan-3dong, Yeongtong-gu, Suwon-City,
Gyeonggi-do, 443-742, Korea
Representative in the EU
Factory: TianJin Samsung Opto-Electronics Co., Ltd.
No.9 ZhangHeng Street, Micro-Electronic Industrial Park,
JinGang Road, Tianjin, China. 300385
Samsung Electronics Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG, UK
(Factories name and address)
17 October, 2010
Joong-Hoon Choi / Lab. Manager
(Place and date of issue)
(Name and signature of authorized person)
Declaration & Applicable standards
We hereby declare, that the product above is in compliance
with the essential requirements of the R&TTE Directive (1999/5/
EC), the EMC Directive (2004/108/EC) and the LVD Directive
(2006/95/EC) by application of:
EN 60950-1:2006+A11:2009 EN 55024:1998+A1:2001+A2:2003
Appendixes 157
Declaration sentence in official languages
Nation
Cesky
Declaration
Samsung Electronics tímto prohlašuje, že tento digitální fotoaparát je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 1999/5/ES.
Samsung Electronics erklærer herved, at digitale kameraer overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/
EF.
Dansk
Hiermit erklärt Samsung Electronic, dass sich die Digitalkamera in Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Deutsch
Eesti
Käesolevaga kinnitab Samsung Electronics digitaalkaamera vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Hereby, Samsung Electronics declares that this digital camera is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
English
Español
Ελληνική
Français
Italiano
Latviski
Lietuvių
Nederlands
Por medio de la presente Samsung Electronics declara que la cámara digital cumple con los requisitos esenciales y cualesquiera
otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ η Samsung Electronics ΔΗΛΩΝΕΙ ΟΤΙ η ψηφιακή φωτογραφική μηχανή ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente Samsung Electronic déclare que l'appareil photo numérique est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Con la presente Samsung Electronicsdichiara che questa fotocamera digitale è conforme ai requisiti essenziali e alle altre disposizioni
stabilite dalla Direttiva 1999/5/CE.
Ar šo Samsung Electronics deklarē, ka digitālā kamera atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Šiuo Samsung Electronics deklaruoja, kad šis skaitmeninis fotoaparatas, atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos
nuostatas.
Hierbij verklaart Samsung Electronics dat de digitale camera in overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Appendixes 158
Declaration sentence in official languages
Nation
Malti
Declaration
Hawnhekk, Samsung Electronics, tiddikjara li din il-kamera diġitali hi konformi mar-rekwiżiti essenzjali u ma' dispożizzjonijiet rilevanti
oħrajn ta' Direttiva 1999/5/KE.
A Samsung Electronics kijelenti, hogy ez a digitális fényképezőgép megfelel az 1999/5/EK irányelv alapvetõ követelményeinek és
egyéb vonatkozó elõírásainak.
Magyar
Niniejszym firma Samsung Electronics oświadcza, że ten aparat cyfrowy jest zgodny z zasadniczymi wymogami oraz pozostałymi
stosownymi postanowieniami Dyrektywy 1999/5/WE.
Polski
Samsung Electronics declara que esta câmera digital está conforme os requisitos essenciais e outras disposições da Directiva
1999/5/CE.
Português
Slovensko
Slovensky
Suomi
Samsung Electronics izjavlja, da je ta digitalni fotoaparat v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive
1999/5/ES.
Samsung Electronics týmto vyhlasuje, že tento digitálny fotoaparát spĺňa základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
Samsung Electronics vakuuttaa täten että tämä digitaalikamera on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Härmed intygar Samsung Electronicsatt dessa digitalkameror står i överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Svenska
Български
Română
Norsk
С настоящото Samsung Electronics декларира, че този цифров фотоапарат е в съответствие със съществените изисквания и
другите приложими разпоредби на Директива 1999/5/ЕК.
Prin prezenta, Samsung Electronics, declară că această cameră foto digitală este în conformitate cu cerinţele esenţiale şi alte
prevederi relevante ale Directivei 1999/5/CE.
Samsung Electronicserklærer herved at dette digitalkameraet er i samsvar med de grunnleggende krav og øvrige relevante krav i
direktiv 1999/5/EF.
Bu belge ile, Samsung Electronics bu dijital kameranın 1999/5/EC Yönetmeliginin temel gerekliliklerine ve ilgili hükümlerine uygun
olduğunu beyan eder.
Türkiye
Hér með lýsir Samsung Electronics því yfir að þessi stafræna myndavél sé í samræmi við grunnkröfur og önnur ákvæði tilskipunar
1999/5/EB.
Íslenska
Appendixes 159
Index
Focus area
Motion recognition 82
I
Icons
My star
L
Image adjustment
brightness
N
G
contrast
M
Macro 60
saturation
O
H
Memory card
Home screen 26
Metering
center-weighted 70
P
Appendixes 161
Index
Shooting portraits
Resolution
Retouching faces
T
S
Timer
Saturation
Q
Smart Crop 94
R
smart face recognition 65
Red-eye
Smart Filter
Remote Viewfinder 116
Appendixes 162
Index
Transferring files
V
W
Video
Website
Uploading photos or
Viewing files
U
Z
Zoom
Voice memo
Using the touch screen
Appendixes 163
Please refer to the warranty that came with your product or
or inquiries.
|
Westcott 1867 User Manual
Victor Technology 1240 2 Series User Manual
Toastmaster RHFP8B User Manual
Sony XR 1100 User Manual
Sony Handycam HDR XR350V User Manual
Sony DSR DR1000P User Manual
Sony CCD TRV112 User Manual
Sony BDV E980 User Manual
Sennheiser Camcorder 100 P SERIES User Manual
Samsung Camcorder HMX Q100UN User Manual