Samsung HT E3550 User Manual

HT-E3500

HT-E3530

HT-E3550

5.1CH Blu-ray™

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

HT-E3500_XY_0229.indd 1

2012-02-29 오후 3:33:08

- If you move your product suddenly from a

cold place to a warm place, condensation

may occur on the operating parts and lens

and cause abnormal disc playback. If this

occurs, unplug the product, wait for two

hours, and then connect the plug to the

power outlet. Then, insert the disc, and try to

play back again.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping.

- Avoid touching the surface of a disc where

data has been recorded.

• If the product makes an abnormal noise or

produces a burning smell or smoke, turn off

the power switch immediately and disconnect

the power plug from the wall outlet. Then,

contact the nearest customer service centre for

technical assistance. Do not use the product.

Using the product as it is may cause a fire or an

electric shock.

- Hold the disc by the edges so that fingerprints

will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a

disc, clean it with a mild detergent

diluted in water and wipe with a

soft cloth.

• To turn this apparatus off completely, you must

pull the power plug out of the wall socket.

Consequently, the power plug must be easily

and readily accessible at all times.

- When cleaning, wipe gently from the inside to

the outside of the disc.

- Disc Storage

 Do not keep in direct sunlight.

 Keep in a cool ventilated area.

Using the 3D Function

 Keep in a clean protection jacket and store

IMPORTANT HEALTH AND SAFETY

INFORMATION FOR 3D PICTURES.

Read and understand the following safety

information before using the 3D function.

vertically.

Handling Cautions

• Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea, and

headaches.

• Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids,

such as vases, on the apparatus.

If you experience any such symptom, stop

viewing 3D TV, remove the 3D Active Glasses,

and rest.

• To turn this apparatus off completely, you must

pull the power plug out of the wall socket.

Consequently, the power plug must be easily

and readily accessible at all times.

• Watching 3D images for an extended period of

time may cause eye strain. If you feel eye strain,

stop viewing 3D TV, remove your 3D Active

Glasses, and rest.

• Do not touch the power plug with a wet hand.

It can cause an electric shock.

• Do not plug multiple electric devices into the

same wall socket. Ovedrloading a socket can

cause it to overheat, resulting in a fire.

• A responsible adult should frequently check on

children who are using the 3D function.

If there are any reports of tired eyes, headaches,

dizziness, or nausea, have the child stop viewing

3D TV and rest.

• Maintenance of the Cabinet

- Before connecting other components to this

product, be sure to turn them off.

• Do not use the 3D Active Glasses for other

purposes (such as general eyeglasses,

sunglasses, protective goggles, etc.)

English

HT-E3500_XY_0229.indd 3

2012-02-29 오후 3:34:06

Safety Information

• Do not use the 3D function or 3D Active Glasses

while walking or moving around. Using the 3D

function or 3D Active Glasses while moving

around may cause you to bump into objects,

trip, and/or fall, and cause serious injury.

Licence

• If you want to enjoy 3D content, connect a 3D

device (3D compliant AV receiver or TV) to the

product’s HDMI OUT port using a high-speed

HDMI cable. Put on 3D glasses before playing

the 3D content.

• Dolby and the double-D symbol are registered

trademarks of Dolby Laboratories.

• The product outputs 3D signals only through

HDMI cable connected to the HDMI OUT port.

• Manufactured under licence under U.S. Patent

Nos: 5,956,674; 5,974,380; 6,226,616;

• As the video resolution in 3D play mode is fixed

according to the resolution of the original 3D

video, you can not change the resolution to your

preference.

6,487,535; 7,392,195; 7,272,567; 7,333,929;

7,212,872 & other U.S. and worldwide patents

issued & pending. DTS-HD, the Symbol, & DTS-

HD and the Symbol together are registered

trademarks & DTS-HD Master Audio | Essential

is a trademark of DTS, Inc. Product includes

• Some functions such as BD Wise, screen size

adjustment, and resolution adjustment may not

operate properly in 3D play mode.

• You must use a high-speed HDMI cable for

proper output of the 3D signal.

• Stay at least three times the width of the screen

from the TV when watching 3D images. For

example, if you have a 46 inch screen, stay 3.5

meters from the screen.

• ABOUT DIVX VIDEO: DivX® is a digital video

format created by DivX, LLC, a subsidiary

of Rovi Corporation. This is an official DivX

Certified® device that plays DivX video. Visit

divx.com for more information and software

tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX

Certified® device must be registered in order to

play purchased DivX Video-on-Demand (VOD)

movies. To obtain your registration code, locate

the DivX VOD section in your device setup

menu. Go to vod.divx.com for more information

on how to complete your registration.

- Place the 3D video screen at eye level for the

best 3D picture.

• When the product is connected to some 3D

devices, the 3D effect may not function properly.

•

This product does not convert 2D content into 3D.

• “Blu-ray 3D” and “Blu-ray 3D” logo are

trademarks of the Blu-ray Disc Association.

DivX Certified® to play DivX® video up to HD

1080p, including premium content.

DivX®, DivX Certified® and associated logos

are trademarks of Rovi Corporation or its

subsidiaries and are used under licence.

Covered by one or more of the following U.S.

patents : 7,295,673; 7,460,668; 7,515,710;

7,519,274

English

HT-E3500_XY_0229.indd 4

2012-02-29 오후 3:34:08

• Open Source Licence Notice

- In the case of using open source software,

Open Source Licences are available on the

product menu.

• The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

manual may be reproduced or copied without the

prior written permission of Samsung Electronics

Co.,Ltd.

• Oracle and Java are registered trademarks of

Oracle and/or its affiliates. Other names may be

trademarks of their respective owners.

• This item incorporates copy protection

technology that is protected by U.S. patents

and other intellectual property rights of

Rovi Corporation. Reverse engineering and

disassembly are prohibited.

• Blu-ray Disc™, Blu-ray™, and the logos are

trademarks of Blu-ray Disc Association.

•

This product uses Cinavia technology to limit the

use of unauthorized copies of some commercially-

produced film and videos and their soundtracks.

When a prohibited use of an unauthorized copy

is detected, a message will be displayed and

playback or copying will be interrupted.

More information about Cinavia technology

is provided at the Cinavia Online Consumer

Information Centre at http://www.cinavia.com. To

request additional information about Cinavia by

mail, send a postcard with your mailing address

to: Cinavia Consumer Information Centre, P.O. Box

86851, San Diego, CA, 92138, USA.”

This product incorporates proprietary technology

under licence from Verance Corporation and is

protected by U.S. Patent 7,369,677 and other

U.S. and worldwide patents issued and pending

as well as copyright and trade secret protection

for certain aspects of such technology. Cinavia

is a trademark of Verance Corporation.

rights reserved by Verance. Reverse engineering

or disassembly is prohibited.

English

HT-E3500_XY_0229.indd 5

2012-02-29 오후 3:34:11

Contents

SAFETY INFORMATION

SETTINGS

Warning

21 The Initial Settings Procedure

22 The Home Screen

Disc Storage & Management

Handling Cautions

Using the 3D Function

Licence

23 Accessing the Settings Screen

24 Settings Menu Functions

28 Networks and the Internet

29 Upgrading Software

31 Setting Up AllShare

GETTING STARTED

MEDIA PLAY

Disk and Format Compatibility

Logos of Discs the product can play

32 Using the Streaming Media Service

11 Accessories

12 Front Panel

12 Rear Panel

32 Playing Files on a USB Device

33 Playing a Disc with User Recorded

Content

33 Playing a Commercial Video Disc

13 Remote Control

33 Playing a Pre-Recorded Commercial

Audio Disc

34 Controlling Video Playback

36 Controlling Music Playback

37 Controlling Photo Playback

37 Listening to Radio

CONNECTIONS

14 Connecting the Speakers

14 Attaching the Toroidal Ferrite Core to the

38 Using the Special Effects Remote Control

Power Cord of the Main Unit

Buttons

Speaker Components

38 Using the BD-LIVE™

Installing the Speakers on the Tallboy

Stand

39 Using AllShare

Connecting The Speakers

18 Connecting to a TV

Connecting to a TV

Method 1

APPENDIX

with an HDMI Cable - Best Quality

(Recommended)

40 Additional Information

45 Troubleshooting

48 Specifications

Connecting to a TV with a

Method 2

Video Cable - Good Quality

19 Connecting to External Devices

AUX IN : Connecting an

Method 1

External Analouge Component

OPTICAL : Connecting an

Method 2

External Digital Audio Component

20 Connecting the FM Antenna

20 Connecting to a Network Router

English

HT-E3500_XY_0229.indd 6

2012-02-29 오후 3:34:13

Getting Started

Disk and Format Compatibility

Disc types and contents your product can play

Media

Disc Type

Details

Blu-ray Disc

BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

3D Blu-ray Disc

DVD-VIDEO, DVD-RW,

DVD-R, DVD+RW,

DVD+R

VIDEO

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVDR/+R discs that have been

recorded and finalised, or a USB storage media containing DivX, MKV, MP4

contents.

CD-RW/-R, DVD-RW/-R, Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage

BD-RE/-R media containing MP3 or WMA contents.

CD-RW/-R, DVD-RW/-R, Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage

BD-RE/-R media containing JPEG contents.

MUSIC

PHOTO

NOTE

\ The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

\ If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.

\ Your product will not play content that has been recorded on a DVD-R at a bit rate that exceeds 10 Mbps.

\ Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.

\ Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio

adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

Disc types your product cannot play

• HD DVD

• DVD-RAM

• DVD-RW(VR mode)

• 3.9 GB DVD-R Disc

for Authoring.

• DVD-ROM/PD/MV-

Disc, etc

• Super Audio CD

(except CD layer)

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio

only, not graphics.)

NOTE

\ This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or

limited operation and provide only certain features during playback.

Please note that this is not a defect in the product.

\ Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc

formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the

manufacture of discs.

\ Please contact the SAMSUNG Customer Care Centre, if you have questions or encounter difficulty when playing Blu-ray Disc,

DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.

\ Some commercial discs and DVD discs purchased outside your region may not play on this product.

English

HT-E3500_XY_0229.indd 7

2012-02-29 오후 3:34:17

Getting Started

Region Code

Logos of Discs the product can play

Blu-ray players and discs are coded by region.

These regional codes must match for a disc to

play. If the codes do not match, the disc will not

play.

The Region Number for this product is displayed

Blu-ray Disc

3D Blu-ray Disc

on the rear panel of the product.

Region

Disc Type

Area

Code

North America, Central America,

South America, Korea, Japan,

Taiwan, Hong Kong and South

East Asia.

BD-LIVE

DTS

Dolby

DivX

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

Blu-ray Disc

India, China, Russia, Central and

South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

PAL broadcast system in

U.K, France, Germany, etc.

Java

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Supported Formats

Music File Support

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

DVD-VIDEO

File

Audio

Container

Support Range

Extension

Codec

Russia, Eastern Europe, India,

most of Africa, North Korea,

Mongolia

*.mp3

MP3

* Sampling rates (in

kHz) - 8, 11, 16,

22, 32, 44.1, 48

China

*.wma

WMA

* Bit rates - All bit

rates from 5kbps

to 384kbps

NOTE

If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this product, the

product cannot play the disc.

English

HT-E3500_XY_0229.indd 8

2012-02-29 오후 3:34:21

Video File Support

File Extension

Container

Video Codec

Audio Codec

Resolution

MP3

AC3

1920x1080

DivX 3.11/4.x/5.1/6.0

*.avi

DTS

1920x1080

AVI

MP4v3

H.264 BP/MP/HP

WMA

PCM

1920x1080

VC-1 AP

DivX 5.1/6.0

H.264 BP/MP/HP

VC-1 AP

MP3

AC3

DTS

*.mkv

MKV

*.wmv

*.mp4

WMA

AAC

WMV (wmv9)

MP4

VC-1 SM

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

MPEG2

H.264 BP/MP/HP

MP1, 2

AC3

*.mpg

*.mpeg

DTS

 Limitations

- Even when the file is encoded by a supported codec mentioned above, a file might not be played if its

content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is

corrupted.

- Files a higher bit rate or frame rate than standard may stutter during sound/video playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

 Video decoder

- Supports up to H.264 Level 4.1 and AVCHD

- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

- MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher

 Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.

Supported DivX subtitle file formats

*.ttxt, *.smi, *.srt, *.sub, *.txt

English

HT-E3500_XY_0229.indd 9

2012-02-29 오후 3:34:32

Getting Started

Notes on the USB connection

AVCHD

(Advanced Video Codec High Definition)

• Your product supports USB storage media,

MP3 players, digital cameras, and USB card

readers.

• This product can play back AVCHD format

discs. These discs are normally recorded and

used in camcorders.

• The product does not support folder or file

names longer than 128 characters.

• The AVCHD format is a high definition digital

video camera format.

• Some USB/External HDD/digital camera devices

may not be compatible with the product.

• The MPEG-4 AVC/H.264 format compresses

images with greater efficiency than the

conventional image compressing format.

• Your product supports the FAT 16, FAT 32, and

NTFS files systems.

• Some AVCHD discs use the “x.v.Colour” format.

This product can play back AVCHD discs that

use “x.v.Colour” format.

• Connect USB devices directly to the product’s

USB port. Connecting through a USB cable

may cause compatibility problems.

• “x.v.Colour” is a trademark of Sony Corporation.

• Inserting more than one memory device into

a multi-card reader may cause the reader to

operate improperly.

• “AVCHD” and the AVCHD logo are trademarks

of Matsushita Electronic Industrial Co., Ltd. and

Sony Corporation.

• The product does not support the PTP protocol.

• Do not disconnect a USB device during a

“loading” process.

NOTE

\ Some AVCHD format discs may not play, depending on

• The bigger the image resolution, the longer the

image takes to display.

the recording conditions.

\ AVCHD format discs need to be Finalised.

• This product cannot play MP3 files with DRM

(Digital Rights Management) downloaded from

commercial sites.

\ “x.v.Colour” offers a wider colour range than normal DVD

camcorder discs.

• Your product only supports video that is under

30fps (frame rate).

\ Some DivX, MKV and MP4 format discs may not play,

depending on their video resolution and frame rate.

• You must remove the USB storage device safely

(by performing the “Safely Remove USB”

function) to prevent possible damage to the

USB memory.

Press the HOME button to move to the home

menu, press the YELLOW (C) button, and then

press the

button.

• SAMSUNG is not responsible for any data file

damage or data loss.

English

HT-E3500_XY_0229.indd 10

2012-02-29 오후 3:34:35

Accessories

Check for the supplied accessories below.

FUNCTION

MUTE

VOLUME

DISC MENU

TITLE MENU

POPUP

Video Cable

User Manual

SUBTITLE

HOME

REPEAT

TOOLS

INFO

RETURN

EXIT

TUNER

MEMORY MO/ST

SOUND

TUNING

EFFECT

DOWN

(For Power cord)

FM Antenna

Toroidal Ferrite Core

Remote Control / Batteries (AAA size)

 _pFi_rg_ou_dr_ue_cs_ta_an_pd_peil_alu_ras_ntr_ca_eti_.ons in this User Manual are provided for reference only and may differ from actual

English

HT-E3500_XY_0229.indd 11

2012-02-29 오후 3:34:37

Getting Started

Front Panel

PLAY/PAUSE

ENTER

STOP

OPEN/CLOSE

FUNCTION

VOLUME CONTROL

DISPLAY

DISC TRAY

USB HOST

POWER

REMOTE CONTROL

SENSOR

NOTE

\ To upgrade the product's software through the USB Host jack, you must use a USB memory stick.

\ When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the

button on the product or

the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

button.

Rear Panel

AUX

VIDEO

OUT

SPEAKERS OUT

LAN

FM ANT

CENTER

FRONT

SURROUND

OPTICAL

SUBWOOFER

DIGITAL

HDMI OUT

AUDIO IN

COOLING FAN

AUX IN VIDEO OUT

AUX

VIDEO

OUT

SPEAKERS OUT

LAN

FM ANT

CENTER

FRONT

SURROUND

OPTICAL

SUBWOOFER

DIGITAL

HDMI OUT

AUDIO IN

SPEAKER OUTPUT LAN TERMINAL

CONNECTORS

HDMI OUT EXTERNAL DIGITAL FM ANTENNA

AUDIO IN (OPTICAL)

NOTE

\ Ensure a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation.

Do not obstruct the cooling fan or ventilation holes.

English

HT-E3500_XY_0229.indd 12

2012-02-29 오후 3:34:43

Remote Control

Tour of the Remote Control

Turn the product on and off.

Press to select Blu-ray's mode.

(AUX, BD/DVD, etc.).

FUNCTION

MUTE

To open and close the disc tray.

VOLUME

Adjust the volume.

Cut off the sound temporarily.

Press numeric buttons to operate

options.

DISC MENU

TITLE MENU

Use to enter the Popup menu/

Title menu.

Press to view the disc menu.

POPUP

Press to search backwards or

forwards.

Press to skip backwards or forwards.

Press to play a disc.

Press to pause a disc.

Press to stop a disc.

SUBTITLE

HOME

REPEAT

Allows you to repeat a title,

chapter, track or disc.

Selects the disc subtitle language.

Press to move to the Home screen.

TOOLS

INFO

Use to display the playback

information when playing

a Blu-ray/DVD disc.

Press to use the Tools menu.

Select on-screen menu items and

change menu value.

RETURN

EXIT

Press to exit the menu.

Return to the previous menu.

Use to set a preset radio frequency.

TUNER

MEMORY MO/ST

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

SOUND

TUNING

Select MONO or STEREO for

radio broadcasts.

EFFECT

DOWN

Select the desired Dolby Pro Logic II

audio mode.

Search for active FM stations and

to change channels.

Press to apply sound effects.

Installing batteries in the Remote Control

\ Make sure to match the “+” and “–” ends of the batteries with the

Battery size: AAA

diagram inside the compartment.

\ Assuming typical TV usage, the batteries last for about one year.

\ The remote control can be used up to approximately 7 meters from the

product in a straight line.

English

HT-E3500_XY_0229.indd 13

2012-02-29 오후 3:34:47

Connections

This section describes various methods of connecting the product to other external components.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf,

or under the TV stand.

Centre

Subwoofer

Selecting the Listening Position

Front (R)

The listening position should be

located about 2.5 to 3 times the

size of the TV's screen from the

TV. For example, if you have a 46

inch screen, locate the listening

position 2.92 to 3.50 meters from

the screen.

Surround (R)

Product

Front (L)

Surround (L)

Place these speakers in front of your listening position, facing inwards (about 45°)

toward you. Place the front speakers so that their tweeters will be at the same

height as your ear. Align the front face of the front speakers with the front face of

the centre speaker or place them slightly in front of the centre speakers.

Front Speakers

Centre Speaker

It is best to install the Centre Speaker at the same height as the front speakers.

You can also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough

room, place these speakers so they face each other. Position them about 60 to

90cm above your ear, facing slightly downward.

Surround Speakers

Subwoofer

Unlike the front and centre speakers, the surround speakers are used mainly

for sound effects. Sound will not come from them all the time.

The position of the subwoofer is not so critical. Place it anywhere you like.

Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit

If you attach a Toroidal ferrite core to the power

cord of the main unit, it will help to prevent RF

SPEAKERS OUT

interference from radio signals.

LAN

CENTER

FRONT

SURROUND

1. Pull the fixing tab of the Toroidal ferrite core

SUBWOOFER

to open it.

2. Make a loop twice in the main unit power

cord.

3. Attach the Toroidal ferrite core to the main unit

power cord as the figure shows and press it

until it clicks.

English

HT-E3500_XY_0229.indd 14

2012-02-29 오후 3:34:52

Speaker Components

HT-E3500

(L)

(R)

(L)

(R)

SUBWOOFER

FRONT

SURROUND

CENTRE

HT-E3530

SCREW (5X20): 6EA

(L) (R)

SCREW (5X15): 2EA

STAND BASE

SPEAKER CABLE

(L)

(R)

FRONT

STAND

SURROUND

CENTRE

SUBWOOFER

HT-E3550

SCREW (5^X20): 12EA

SCREW (5X15): 4EA

SPEAKER CABLE

STAND BASE

(L) (R)

STAND

(L) (R)

SUBWOOFER

FRONT

SURROUND

CENTRE

English

HT-E3500_XY_0229.indd 15

2012-02-29 오후 3:34:56

Connections

Installing the Speakers on the Tallboy Stand

* HT-E3530 only - Front Speakers

* HT-E3550 only - Front/Surround Speakers

1. Turn the Stand Base upside-down and

Stand Base

connect it to the Stand.

2. Use the driver to combine the screws (5x20)

on the 3 marked holes.

Stand

3. Straighten a supplied speaker wire and put in

the hole on the centre of Stand Base.

4. Connect the upper Speaker to the assembled

Stand.

Speaker

Stand

5. Insert a screw (5x15) clockwise into the

hole on the rear of the speaker using a

screwdriver.

And then connect a speaker cable.

6. This is the appearance after the speaker is

installed.

Follow this steps to install other speaker.

Connecting The Speakers

1. Match each speaker cable bundle to the correct speaker by matching the

colour coded plug on each bundle to the coloured sticker on the bottom

of each speaker.

2. To attach speaker wire to each speaker:

Black

Red

a. Press down the red tab on the back of the speaker, insert the red wire,

and then release the tab.

b. Press down the black tab on the back of the speaker, insert the black

wire, and then release the tab.

3. Connect the speaker wire plugs to the back of the product by matching

the colours of the speaker plugs to the colours of the speaker jacks.

English

HT-E3500_XY_0229.indd 16

2012-02-29 오후 3:35:33

In case of HT-E3500

Front Speaker (L)

Surround Speaker (L)

Centre Speaker

SPEAKERS OUT

Surround

SURROUND

Speaker (R)

SURROUND

Front Speaker (R)

SPEAKERS OUT

LAN

CENTER

FRONT

SURROUND

Subwoofer

SUBWOOFER

Refer to page 15 for the speakers of HT-E3530/HT-E3550.

CAUTION

If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install.

However, when you install it, accessories (nails or screws) and installation is not provided by the company.

Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.

Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole)

of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole).

NOTE

If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.

English

HT-E3500_XY_0229.indd 17

2012-02-29 오후 3:35:40

Connections

Connecting to a TV

Select either Method 1 or Method 2.

AUX

VIDEO

OUT

FM ANT

AUX

VIDEO

OUT

SPEAKERS OUT

LAN

CENTER

FRONT

SURROUND

SUBWOOFER

OPTICAL

DIGITAL

OPTICAL

DIGITAL

HDMI OUT

AUDIO IN

(Cable not supplied.)

Method 1

Method 2

HDMI IN

VIDEO IN

Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN

jack on your TV.

If the TV supports ARC, you can hear TV sound from home cinema with only connect this cable.

Method 2 Connecting to a TV with a Video Cable - Good Quality

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN

jack on your TV.

NOTE

\ The VIDEO Out jack always outputs in the 576i/480i resolution regardless of the resolution set in the Setup menu.

\ Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and

the picture will be distorted on the television.

English

HT-E3500_XY_0229.indd 18

2012-02-29 오후 3:35:43

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,

the mode changes in this order : BD/DVD D. IN AUX

ꢀ

AUX

VIDEO

OUT

FM ANT

SPEAKERS OUT

AUX

VIDEO

OUT

LAN

CENTER

FRONT

SURROUND

SUBWOOFER

OPTICAL

DIGITAL

OPTICAL

DIGITAL

HDMI OUT

AUDIO IN

(Cable not supplied.)

Method 1

Method 2

External Devices

Red

OPTICAL OUT

White

Method 1 AUX IN : Connecting an External Analouge Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out

jack on the external analouge component.  Select the AUX mode.

• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

To connect the digital audio output of digital signal components such as Cable Boxes and Satellite

Receivers (Set-Top-Boxes).

Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the

Digital Optical Out jack of the external digital device using a digital optical cable.

 Select the D. IN mode.

NOTE

\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

English

HT-E3500_XY_0229.indd 19

2012-02-29 오후 3:35:47

Connections

Connecting the FM Antenna

FM Antenna (supplied)

AUX

VIDEO

OUT

SPEAKERS OUT

LAN

FM ANT

CENTER

FRONT

SURROUND

OPTICAL

SUBWOOFER

DIGITAL

HDMI OUT

AUDIO IN

1 . Connect the FM antenna supplied to the FM ANTENNA Jack.

2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it

to a wall or other rigid surface.

NOTE

\ This product does not receive AM broadcasts.

Connecting to a Network Router

AUX

VIDEO

OUT

SPEAKERS OUT

LAN

FM ANT

CENTER

FRONT

SURROUND

OPTICAL

SUBWOOFER

FRONT

DIGITAL

HDMI OUT

AUDIO IN

Broadband

modem

Broadband

service

Broadband

service

Broadband modem

(with integrated router)

Router

NOTE

\ Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s

policy. For more information, contact your ISP (Internet Service Provider).

\ DSL users, please use a router to make a network connection.

\ For the AllShare function, a PC must be connected in the network as shown in the figure.

English

HT-E3500_XY_0229.indd 20

2012-02-29 오후 3:35:50

Settings

You have four choices:

The Initial Settings Procedure

16:9 Original - For widescreen TVs. Displays

widescreen pictures in their original 16:9

format and 4:3 pictures (the old, standard

format) in 4:3 pillar box format with black bars

on the left and right.

• The Home menu will not appear if you do not configure

the initial settings.

• The OSD (On Screen Display) may change in this

product after you upgrade the software version.

16:9 Full - For widescreen TVs. Displays

widescreen pictures in their original 16:9

format and expands 4:3 pictures to fill the

16:9 screen.

• The access steps may differ depending on the menu

you selected.

1 . Turn on your TV after connecting the product,

and then turn on the product. When you turn

on the product for the first time, the product

automatically displays the Initial Settings

Language screen.

4:3 Letter Box - For older, standard screen

analouge TVs. Displays 4:3 pictures in full

screen and 16:9 pictures in letter box format

that retains the 16:9 aspect ratio but puts

black bars above and below the picture.

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

4:3 Pan-Scan - For older, standard screen

analouge TVs. Displays 4:3 pictures in full

screen and 16:9 pictures in Pan-Scan format

that fills the screen, but cuts off the left and

right sides of the picture and enlarges the

middle vertically.

English

Français

Deutsch

Español

Italiano

Nederlands

5 . The Network - Wired screen appears.

- If you have a network with dynamic IP

addresses - and most people do - select

Move

Select

Auto, press the

button, and then go to

2 . Press the ▲▼ buttons to select the desired

Step 6.

language, and then press the

button.

- If you have a network with static IP

addresses, we suggest you select Skip by

pressing the BLUE (D) button, and then go

to "Configuring Your Network Connection"

on page 27 after you have completed the

initial setup. "Configuring Your Network

Connection" provides a full explanation of

how to configure your network connection

manually.

3 . Press the

button to start function setup.

Initial Settings

TV Aspect and Network will be set.

Each setting may be changed later under "Settings".

Start

- If you have no network, select Skip by

pressing the BLUE (D) button. The Initial

Settings Complete screen appears, and

then the Home screen appears.

Select

4 . The TV Aspect screen appears. Press the

NOTE

▲▼ buttons to select desired a TV Aspect

\ If you skip network setup here or the setup does not

work correctly, you can go to "Configuring Your Network

Connection" on page 27 to set up the product's network

connection later.

ratio, and then press the

button.

English

HT-E3500_XY_0229.indd 21

2012-02-29 오후 3:35:57

Settings

The Home Screen

Initial Settings I Network - Wired

Choose the method to configure Internet Protocol (IP).

Please make sure that the Ethernet cable is connected.

Auto : Configure IP automatically.

™

Manual

Auto

Settings

Skip

Move

Select

6 . The product verifies the network connection

and then connects to the network. When

it is done, press the E button. The Initial

Settings Complete screen appears, and then

the Home screen appears.

No Disc

a Change Device

d View Devices

Enter

Videos. Play videos located on discs, USB

devices, or your PC.

Initial Settings I Network - Wired

Photos. View photos located on discs, USB

MAC Address (d0:66:7b:dc:28:fc)

IP Address, Subnet Mask, Gateway, DNS Server

Gateway Ping



devices, or your PC.

Internet Service Test

Network Service. Select a network service:

Your network is operating properly.

If you still have a problem, contact your network service provider.

YouTube.

Music. Play music located on discs, USB devices,

or your PC.

Select

Settings. Set various functions to suit your

NOTE

personal preferences.

\ If you want to display the Initial Setting screen again and

Displays the coloured buttons on your remote that

you can press to access or perform functions.

make changes, select the Reset option. (See page 27)

\ If you use an HDMI cable to connect the product to an

Anynet+(HDMI-CEC)-compliant Samsung TV and 1.) You

have set the Anynet+(HDMI-CEC) feature to ON in both

the TV and the product and 2.) You have set the TV to a

language supported by the product, the product will select

that language as the preferred language automatically.

 Selecting an Option on the Home Screen

1 . To select an option on the Home screen,

move the cursor using the

buttons until it

◄►

highlights the option of your choice, and then

press the E button.

NOTE

\ To play or view video, music, or photo files located on

your PC, you must connect your home theater and PC

to a home network and you must download, install, and

configure the AllShare software on your PC. (See page

31.)

English

HT-E3500_XY_0229.indd 22

2012-02-29 오후 3:36:05

NOTE

Accessing the Settings Screen

\ The E button on the product's front panel can be

used for same purpose as the E button on the remote

control.

1 . Select Settings on the Home screen, and

then press

. The Settings screen appears.

Settings

Detailed Function Information

Display

Audio

►

3D Settings

Each Settings function, menu item, and individual

option is explained in detail on-screen. To view an

explanation, use the ▲▼◄► buttons to select the

function, menu item, or option.

The explanation will usually appear on the bottom

of the screen. A short description of each Settings

function starts on next page. Additional information

on some of the functions is also in the Appendix of

^{this manual.}S

TV Aspect Ratio

BD Wise

16:9 Original

Network

System

Language

Security

General

Support

Resolution

Auto

Movie Frame (24 Fs)

HDMI Color Format

HDMI Deep Color

Progressive Mode

Auto

2 . To access the menus, sub-menus, and

options on the Settings screen, please refer

to the remote control illustration below.

NOTE

\ If you leave the product in the stop mode for more than

5 minutes without using it, a screen saver will appear on

your TV. If the product is left in the screen saver mode for

more than 20 minutes, the power will automatically turn

off.

Buttons on the Remote Control Used

for the Settings Menu

SUBTITLE

HOME

REPEAT

TOOLS

INFO

RETURN

EXIT

HOME Button : Press to move to the Home screen.

RETURN ( ) Button : Return to the previous menu.

E (Enter) / DIRECTION Button :

~ Press

to move the cursor or select

▲▼◄►

an item.

~ Press the E button to activate the currently

selected item or confirm a setting.

EXIT Button : Press to exit the current menu.

English

HT-E3500_XY_0229.indd 23

2012-02-29 오후 3:36:11

Settings

Settings Menu Functions

Display

Set up the 3D related functions.

 3D Blu-ray Playback Mode: Select whether to play a Blu-

ray Disc with 3D contents in 3D Mode. If you move to the

Home menu while in 3D mode, the product will switch to 2D

automatically.

3D Settings

 Screen Size: Enter the size of the TV attached to the

product. The product will automatically adjust the 3D output

to the screen size of the TV.

Lets you adjust the output of the product to the screen size of

your TV. See page 21, Step 4 for a description of the screen

size options.

TV Aspect

Ratio

BD Wise is Samsung’s latest inter-connectivity feature.

When you connect a Samsung product and a Samsung TV

with BD Wise to each other via HDMI, and BD Wise is on in

both the product and TV, the product outputs video at the

video resolution and frame rate of the Blu-ray/DVD Disc.

BD Wise

Lets you set the output resolution of the HDMI video signal

to Auto, 1080p, 1080i, 720p, 576p/480p. If Composite

is connected, the resolution supports only 576i/480i. The

number indicates the number of lines of video per frame. The

i and p indicate interlaced and progressive scan, respectively.

The more lines, the higher quality.

Resolution

Setting the Movie Frame (24 Fs) feature to Auto lets the

product adjust its HDMI output to 24 frames per second

automatically for improved picture quality if attached to a 24Fs

compatible TV.

Movie Frame

(24 Fs)

• You can enjoy the Movie Frame (24 Fs) feature only on a TV

supporting this frame rate.

• Movie Frame is only available when the product is in the

HDMI 1080i or 1080p output resolution modes.

Lets you set the colour space format for the HDMI output to

match the capabilities of the connected device (TV, monitor,

etc).

HDMI Color

Format

Lets you set the product to output video from the HDMI OUT

jack with Deep Colour. Deep Colour provides more accurate

colour reproduction with greater colour depth.

HDMI Deep

Color

Progressive

Mode

Lets you improve picture quality when viewing DVDs.

English

HT-E3500_XY_0229.indd 24

2012-02-29 오후 3:36:16

Audio

Speaker

Settings

You can set the speaker options.

Speaker

Lets you select which speakers you want active, either the

TV's speakers or the Home theater's speakers.

Selection

Lets you direct the sound from the TV to the Home Cinema

speakers. Requires an HDMI connection and an Audio Return

Channel (ARC) compatible TV.

Audio Return

Channel

• When Audio Return Channel is set to Auto, the home

cinema automatically selects either ARC or optical input as

the audio source, depending on your connections. If Audio

Return Channel is active, optical input does not work.

Lets you set the Digital Output to match the capabilities of the

AV receiver you’ve connected to the product. For more details,

please refer to the digital output selection table. (See page 44)

Digital Output

Lets you apply dynamic range control to Dolby Digital, Dolby

Digital Plus, and Dolby True HD audio.



Auto

utomatically controls the dynamic range of Dolby

rueHD audio, based on information in the Dolby TrueHD

oundtrack. Also turns dynamic range control on for Dolby

Dynamic

igital and Dolby Digital Plus.

Range Control



ff: Leaves the dynamic range uncompressed, letting you

ear the original sound.

n: Turns dynamic range control on for all three Dolby

ormats. Quieter sounds are made louder and the volume of

oud sounds is reduced.

When the product is attached to a digital TV, lets you adjust

the audio delay so that the audio syncs with the video. You

can set the delay between 0 and 300 milliseconds.

Audio Sync

English

HT-E3500_XY_0229.indd 25

2012-02-29 오후 3:36:18

Settings

Network

Wired

Settings

For more information about Network Settings and network

Network

functions, see "Networks and the Internet" starting on page

28.

Lets you test the Internet Protocol setup to see if it is working

correctly.

Network Test

Network

Lets you check whether a connection to the network and the

Internet have been established.

Status

BD-Live

Internet

Lets you allow or prohibit an Internet connection for the BD-

Live service.

Connection

System

Lets you re-run the Initial Settings procedure. See page 21 for

details.

Initial Settings

Anynet+ is a convenient function that offers linked operations

with other Samsung products that have the Anynet+ feature

and lets you control those products with one Samsung TV

remote. To operate this function, you must connect this

product to an Anynet+ Samsung TV using an HDMI cable.

Anynet+

(HDMI-CEC)

Lets you manage the contents you downloaded through a Blu-

ray disc that supports the BD-Live service. You can view the

information about the USB device you are using for BD Live

data storage including the storage space. You can also delete

BD Live data and change the device.

BD Data

Management

DivX® Video

On Demand

View DivX® VOD Registration Codes to purchase and play

DivX® VOD contents.

Language

You can select the language you prefer for the On-Screen Menu, disc menu, etc.

• The selected language will only appear if it is supported on the disc.

English

HT-E3500_XY_0229.indd 26

2012-02-29 오후 3:36:20

Security

The default PIN is 0000. Enter the default PIN to access the security function if

you haven't created your own PIN.

BD Parental

Prevents playback of Blu-ray Discs with a rating equal to or

above a specific age ratings unless the PIN is entered.

Rating

Prevents playback of DVDs with a rating above a specific

numerical ratings unless the PIN is entered.

DVD Parental

Rating

YouTube Lock

Change PIN

If the lock set to On, you must enter the PIN to use the service.

Change the 4-digit PIN used to access security functions.

General

Support

Time Zone

You can specify the time zone that is applicable to your area.

Software

Upgrade

For more information about the Software Upgrade function,

see "Upgrading Software" on page 29.

Contact

Provides contact information for assistance with your product.

Samsung

Terms of

Service

View the general disclaimer regarding third party contents and

services.

Agreement

All settings will revert to the default except for the network

settings. The default security password is 0000.

Reset

English

HT-E3500_XY_0229.indd 27

2012-02-29 오후 3:36:22

Settings

6 . After the Network function has acquired

the network values, press the RETURN (

button.

Networks and the Internet

)

When you connect this product to a network, you

can use network based applications and functions

such as BD-LIVE and upgrade the product's

software through the network connection.

7 . Select Network Test, and then press

The home cinema validates the network

connection. When it is done, press the

RETURN ( ) button.

Configuring Your Network Connection

Manual

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, we recommend you use the Automatic

procedure below. If it is static, you must use the

Manual procedure that follows.

If you have a static IP address or the Automatic

procedure does not work, you’ll need to set the

Network Settings values manually.

Settings

Wired Network Settings

Display

• Before you begin, confirm that the product is

Internet Protocol Setup : Manual

Audio

IP Address

Subnet Mask

Gateway

connected to your router with a network cable.

Network

System

Language

255 255 255

Automatic

Security

General

Support

DNS

DNS Server

: Manual

To start the configuration process, follow these

steps:

Move

Select

Return

1 . In the Home menu, select Settings, and then

press the

button.

1 . Follow the first four steps in the Automatic

procedure, but select Manual instead of Auto

in Step 4.

2 . Select Network, and then press the

button.

3 . Select Wired Network Settings, and then

2 . Press the button to go to the first entry

▼

press the

button.

field (IP Address).

The Wired Network Settings screen appears.

3 . Use the number buttons on your remote to

enter numbers.

4 . Press the button on the Internet Protocol

►

Setup menu.

4 . When done with each field, use the ► button

to move successively to the next field.

You can also use the other arrow buttons to

move up, down, and back.

Use

button to select Auto, and then

▲▼

press the

button.

Settings

5 . Enter the IP Address, Subnet Mask, and

Wired Network Settings

Display

Gateway values.

Internet Protocol Setup : Auto

Audio

IP Address

Subnet Mask

Gateway

6 . Press the ▼ button to go to DNS.

Network

System

Language

7 . Press the ▼ button to go to the first DNS

entry field. Enter the numbers as above.

Security

General

Support

DNS

DNS Server

: Auto

8 . Press the RETURN ( ) button on your

remote.

Move

Select

Return

5 . The Network function acquires and fills in the

values for IP Address, Subnet Mask, etc.,

automatically.

English

HT-E3500_XY_0229.indd 28

2012-02-29 오후 3:36:24

9 . Select Network Test, and then press

Upgrading Software

When the test is completed, press RETURN

(

) button to exit to the previous screen.

The Software Upgrade menu allows you to

upgrade the product’s software for performance

improvements or additional services.

10 . Select Network Status, and then press

11 . The Network Status screen appears.

The product verifies the network connection

• Never turn the product off or back on manually during

and then connects to the network. When it is

the update process.

done, highlight OK, and then press

1 · In the Home menu, select Settings, and then

NOTE

press the

button.

\ You can get the Network values from your Internet

2 · Select Support, and then press the

provider. You can also view these values on most Windows

computers. For instructions, see "Getting the Network

Setting Values" on this page.

button.

3 · Select Software Upgrade, and then press

the

button.

4 · Select one of the following methods:

< Getting the Network Settings Values >

• By Online

You can view your Network Settings values on

most Windows computers. To view the Network

Settings values, follow these steps:

• Windows XP

• By USB

• Auto Upgrade Notification

5 · Press the

button.

Directions for each method begin below.

1 · Right click the Network icon on the bottom

right of the Windows desktop.

NOTE

2 · In the pop-up menu, click Status.

\ The update is complete when the product turns off

after restarting. Press the POWER button to turn on the

updated product for your use. Never turn the product on

or off manually during the update process.

3 · On the dialog that appears, click the Support

tab.

4 · On the Support tab, click the Details button.

The Network settings are displayed.

Samsung Electronics takes no legal responsibility for product

malfunction caused by an unstable Internet connection or

consumer negligence during a software upgrade.

• Windows 7

1 · Click the Network icon on the bottom right of

\ If you want to cancel the upgrade while the upgrade

the Windows desktop.

software is downloading, press the

button.

2 · In the pop-up menu, click Network and

Sharing Centre.

By Online

3 · On the dialog that appears, click the Local

Your product must be connected to the Internet

to use the By Online function. Remove all discs

before you begin.

Area Connection.

4 · On the Support tab, click the Details button.

The Network settings are displayed.

1 · Select By Online, and then press the

NOTE

button. The Connecting to Server message

\ Depending on your Windows version, the information may

appears.

differ.

2 · If an update is available, a popup message

appears asking if you want to upgrade.

If you select Yes, the product turns off

automatically, turns on, and then begins the

upgrade.

English

HT-E3500_XY_0229.indd 29

2012-02-29 오후 3:36:29

Settings

IMPORTANT

NOTE

\ Never turn the home cinema on or off manually during a

\ There should be no disc in the product when you upgrade

software upgrade.

the software using the USB Host jack.

\ Never turn the product off or on manually during the

3 · The update progress popup appears. When

the update is completed, the product turns

off automatically again.

update process.

\ When the software upgrade is done, check the software

details in the Software Upgrade menu.

4 · Press the POWER button to turn on the

product.

Auto Upgrade Notification

NOTE

If your product is connected to the network and

you set Auto Upgrade Notification on, the product

will notify you if a new software version is available

with a pop-up message.

\ The update is complete when the product turns off

after restarting. Press the POWER button to turn on the

updated product for your use.

\ Never turn the product off or on manually during the

update process.

1 · Turn on the product.

\ Samsung Electronics takes no legal responsibility for

a product malfunction caused by an unstable internet

connection or consumer negligence during software

upgrade.

2 · In the Software Upgrade menu, set Auto

Upgrade Notification to On.

If there is a new software version available,

the product will notify you with a pop-up

message.

By USB

3 · To upgrade the firmware, select Yes. The

product turns off automatically, turns on, and

then begins the upgrade.

1 · Visit www.samsung.com.

2 · Click SUPPORT on the top right of the page.

4 · The update progress popup will appear.

When the update is completed, it will turn

back off automatically.

3 · Enter the product's model number into the

search field, and then click Find Product.

5 · Press the POWER button to turn on the

4 · Click Get downloads in the centre of the

product.

NOTE

page below the Downloads header.

5 · Click Firmware in the centre of the page.

6 · Click the ZIP icon in the File column on the

\ The update is complete when the product turns off

after restarting. Press the POWER button to turn on the

updated product for your use. Never turn the product on

or off manually during the update process.

right side of the page.

7 · Click OK in the pop-up that appears to

download and save the firmware file to your

PC.

\ Samsung Electronics shall take no legal responsibility

for product malfunction caused by unstable of internet

connection or consumer negligence during software

upgrade.

8 · Unzip the zip archive to your computer. You

should have a single folder with the same

name as the zip file.

9 · Copy the folder to a USB flash drive.

10 · Make sure no disc is inserted in the product,

and then insert the USB flash drive into the

USB port of the product.

11 · In the product’s menu, go to Settings >

Support > Software Upgrade.

12 · Select By USB.

English

HT-E3500_XY_0229.indd 30

2012-02-29 오후 3:36:31

Setting Up AllShare

AllShare enables you to play music, video and

photo files in your PC using the product. To use

AllShare, you must connect the product to your

PC via the network (See page 20) and install the

SAMSUNG PC Share Manager on the PC.

To Download the AllShare Software

To use AllShare with your PC, you must install

AllShare software on your PC. You can download

the PC software and get detailed instructions for

using AllShare from the Samsung.com website.

1 · Go to www.samsung.com.

2 · Click SUPPORT at the top of the page.

3 · On the Support page, enter the model

number of your product into the Model

Number field, and then press the

button.

4 · On the page that appears, click Get

downloads on the left side under

Downloads. The Download Centre appears.

5 · On the Download Centre page, click the

Software tab.

6 · On the software tab, click the File icon on

the right side of the AllShare line.

7 · In the pop-up that appears, click Save File.

8 · Find the AllShare install file on your disk, and

then double click the file.

9 · In the pop-up that appears, click Run, and

then follow the directions that appear on your

screen.

Download the AllShare Installation/Instruction

manual from the same Software Tab by clicking

the corresponding PDF file symbol in the File

column on the right. The file, in PDF format, will

download and open. Follow the directions to

install and setup AllShare. You can view and/or

save the file.

NOTE

\ To use AllShare with your smartphone, you need to

connect your set & smartphone to the same router.

English

HT-E3500_XY_0229.indd 31

2012-02-29 오후 3:36:33

Media Play

7 · If files appear on the screen go to Step 8.

If file folders appear on the screen, use the

▲▼◄► buttons to select a folder, press

Using the Streaming Media Service

• To use the Streaming Media Service, your home

cinema must be connected to the Internet. You also

may need a vendor account for some services.

and then go to Step 8.

8 · Use the ▲▼◄► buttons to select a file to

play or view, and then press the

button.

Use the

buttons in the Home menu to

▲▼◄►

-1

move to YouTube service, and then press the

button.

4 . Press the BLUE (D) button.

™

You can view video streamed by YouTube.

USB DISK

Playing Files on a USB Device

You can play multimedia files located on a

USB DISK

d HOME " Enter

connected USB device.

1 · Move to the Home menu.

-1

5 . Press the ◄► buttons to select USB Flash

2 · In Stop mode, connect the USB storage

device to the USB port on the front panel of

the product. The message “Do you want to

access the device?” will be displayed.

Mem or Disk, then press the

button.

-1

6 . Press the ▲▼ buttons to select Videos,

Music or Photos, then press the

button.

-1

7 . If files appear on the screen go to Step 8 .

If file folders appear on the screen, use the

▲▼◄► buttons to select a folder, press

3 · Press the ◄► button to select Yes, then

press the

button.

4 · Press the RED (A) button.

-1

and then go to Step 8 .

-1

8 . Use the ▲▼◄► buttons to select a file to

play or view, and then press the

button.

™

NOTE

\ To prevent possible damage to the USB memory, you

must remove the USB storage device safely using the

“Safely Remove USB” function. Press the HOME button

to move to the Home menu, select the YELLOW (C)

USB DISK

button, and then press the

button.

USB DISK a Change Device

c Safely Remove USB d View Devices " Enter

\ To listen to your music files with 5.1 channel sound, you

must set the Dolby Pro Logic II mode to MATRIX.

(See page 38)

5 · Press the ▲▼ buttons to select USB Flash

Mem or Disk, then press the

button.

6 · Press the ◄► buttons to select Videos,

Music or Photos, then press the

button.

English

HT-E3500_XY_0229.indd 32

2012-02-29 오후 3:36:34

Playing a Disc with User Recorded

Content

Playing a Commercial Video Disc

Place a disc into the disc tray with the disc’s label

facing up and then close the disc tray. Playback

starts automatically. If it does not playback

You can play multimedia files you have recorded

on DVD or CD discs.

automatically, move to Videos in the Home menu

and press the

button.

1 · Turn on the home cinema.

2 · Open the disc tray, place a user recorded disc

into the disc tray with the disc’s label facing up,

and then close the tray.

In most cases, commercial videos will display a

disc menu. To play the movie on the disc, select

Play on the disc menu, and then press

3 · After the disc loads, press the RED (A) button.

NOTE

4 · Press the ▲▼ buttons to select CD or DVD,

For more information about playing videos, go to "Controlling

Video Playback" on page 34.

and then press the

button.

5 · Press the ◄► buttons to select Videos, Music,

or Photos, then press the

button.

Playing a Pre-Recorded

Commercial Audio Disc

6 · If files appear on the screen, go to Step 7. If

file folders appear on the screen, use the ◄►

buttons to select a folder, press

, and then

go to Step 7.

1 · Insert an Audio CD (CD-DA) or an MP3 Disc into

the disc tray.

7 · Use the ◄► buttons to select a file to play or

view, and then press the

button.

• For an Audio CD (CD-DA), the first track will

be played automatically. Tracks on a disc

are played in the order in which they were

recorded on the disc.

-1

3 . After the disc loads, press the BLUE (D)

button.

•

For an MP3 disc, press the ◄► buttons to

-1

select Music, then press the

button.

4 . Press the ◄► buttons to select CD or DVD

and then press the

button.

Playlist

1/12

-1

5 . Press the ▲▼ buttons to select Videos,

TRACK 001

TRACK 002

TRACK 003

TRACK 004

TRACK 005

TRACK 006

05:57

04:27

04:07

03:41

03:17

03:35

Music, or Photos, and then press the

button.

-1

6 . If files appear on the screen go to Step 7 .

If file folders appear on the screen, use the

00:08 / 05:57

▲▼ buttons to select a folder, press

, and

-1

then go to Step 7 .

-1

7 . Use the ▲▼ buttons to select a file to play or

Pause

Tools

Return

view, and then press the

button.

2 · To play a particular track, use the ▲▼ buttons

on the remote to select the track, and then

press the

button.

NOTE

For more information about playing music, go to "Controlling

Music Playback" on page 36.

English

HT-E3500_XY_0229.indd 33

2012-02-29 오후 3:36:41

Media Play

Controlling Video Playback

You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage

devices. Depending on the media, some of the functions described in this manual may not be available.

Buttons on the Remote Control used for Video Playback

DISC MENU

TITLE MENU



Using the disc menu, title menu, popup

POPUP

menu and title list

During playback, press this button to

DISC MENU

TITLE MENU

POPUP MENU

display the Disc menu.

SUBTITLE

HOME

REPEAT

During playback, press this button to

display the Title menu.

• If your disc has a playlist, press the



Repeat Playback

GREEN (B) button to go to the playlist.

During playback, press this button to

1 · During playback, press the REPEAT

button on the remote control.

display the Pop-up menu.

2 · Press the ▲▼ buttons to select a

Chapter, All or Title, then press the

DISC MENU or During playback, press this button to

TITLE MENU

display the title list.

Playback related buttons

button.

| NOTE |



Repeat a Title

The screen may not display Chapter or Title

immediately. Continue to press the ▲▼

buttons until your choice is inside the blue

field.

The product does not play sound in Search, Slow,

or Step mode.

or Chapter

Starts playback.

Stops playback.

Pauses playback.

During playback, press the 3 or 4

3 · To return to normal play, press the

REPEAT button again, press the

▲▼ buttons to select Off, and then

press the

button.

Fast Motion button.

1 · During playback, press the REPEAT

button on the remote control.

2 · Press the ▲▼ buttons to select

Repeat A-B.

Play

Each time you press the 3 or 4

button, the playback speed will change.

In pause mode, press the 4 button.

Each time you press the 4 button, the

playback speed will change.

In pause mode, press the 7 button.

Each time you press the 7 button, a

new frame appears.

Slow Motion

Play

| NOTE |

The screen may not display Repeat A-B

immediately. Continue to press the ▲▼

buttons until Repeat A-B is inside the blue

field.

Step Motion

Play

Repeat a

Section

3 · Press the

button at the point

where you want repeat play to start (A).

During playback, press the 1 or 2

4 · Press the

button at the point

button.

Skip Motion

Play

where you want repeat play to stop (B).

5 · To return to normal play, press the

REPEAT button again.

Each time you press 1 or 2 button,

the disc moves to the previous or next

chapter or file.

6 · Press the

button.

| NOTE |

You must set point (B) at least 5 seconds of

playing time after point (A).

English

HT-E3500_XY_0229.indd 34

2012-02-29 오후 3:36:44

Menu that appears only when a BD/DVD

disc plays

Using the TOOLS Menu

During playback, press the TOOLS button.

If the movie or video have more than

Select to move to a chapter that you

Chapter

Title

one title, move to or select a desired

desire to watch.

title.

Select to repeat a specific title, chapter

Select to move to the specific playback

point. Use the numeric buttons to input

the playback point.

Select to set the desired full screen

size. You can select Original, Mode1

(larger), and Mode2 (largest).

Repeat Mode

Audio

or marked section. Works the same as

Playing Time

Full Screen

the REPEAT button. See page 34.

Select to set the desired audio

language.

Select to set the desired subtitle

language.

Select to set the picture mode.

Subtitle

- You can also operate this function by

pressing the SUBTITLE button on the

remote control.

- Picture Mode

▪ Normal : Choose this setting for

most viewing applications.

To view a scene from another angle.

The Angle option displays the number

of angles available to view (1/1, 1/2,

1/3, etc.).

▪ Movie : This is the best setting

Angle

Picture Setting

for watching movies.

▪ User : Lets you adjust the

sharpness and noise reduction

function respectively.

BONUSVIEW

Video /

Select to set the desired bonusview

option.

▪ Dynamic : Choose this setting to

BONUSVIEW

Audio

increase Sharpness.

(BD disc only)

| NOTE |

\ Depending on the disc or storage device, the Tools menu

may differ. All options may not be displayed.

Creating a Video Playlist

You can create a playlist of video files in a way that

is nearly identical to the way you create a playlist

of music files. For instructions, see "Creating a

Music Playlist" on page 36.

English

HT-E3500_XY_0229.indd 35

2012-02-29 오후 3:36:48

Media Play

Creating a Music Playlist

Controlling Music Playback

1 · If playing music from a commercial CD or

You can control the playback of music content

DVD, press the

or RETURN ( ) button.

located on DVDs, CDs, and USB storage devices.

Buttons on the Remote Control used

for Music Playback

The Music List Screen appears. If you are

creating a playlist from music on a user

created disk or USB device, access the

Music list as described in "Playing Files on a

USB Device" on page 32 or "Playing a Disc

with User Recorded Content" on page 33.

2 · Press the ▲▼◄► buttons to move to the

desired file, and then press the YELLOW (C)

button to select it. Repeat this procedure to

select additional files.

DISC MENU

TITLE MENU

POPUP

Music TRACK 002

2 files selected 1/2 Page

TRACK 001