BD-E5900
™
Blu-ray Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
13. Unplug this apparatus during lightning storms
Precautions
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
Disc Storage & Management
4. Follow all instructions.
• Holding Discs
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping
7. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
- When cleaning, wipe gently from the inside to
the outside of the disc.
• Disc Storage
` Do not keep in direct sunlight.
` Keep in a cool ventilated area.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
` Keep in a clean protection jacket and store
vertically.
Handling Cautions
11. Only use attachments/accessories specified
by the manufacturer.
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by the
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
|
English
3
Safety Information
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
• Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
• Maintenance of Cabinet.
- Before connecting other components to this
player, be sure to turn them off.
• If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
player's HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
- If you move your player suddenly from a cold
place to a warm place, condensation may
occur on the operating parts and lens and
cause abnormal disc playback. If this occurs,
unplug the player, wait for two hours, and
then connect the plug to the power outlet.
Then, insert the disc, and try to play back
again.
• The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
• If the product makes an abnormal noise or
produces a burning smell or smoke, turn off
the power switch immediately and disconnect
the power plug from the wall outlet. Then,
contact the nearest customer service center for
technical assistance. Do not use the product.
Using the product as it is may cause a fire or an
electric shock.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46-inch screen, stay 138
inches (11.5 feet) from the screen.
Using the 3D function
• Place the 3D video screen at eye level for the
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
best 3D picture.
• When the player is connected to some 3D
devices, the 3D effect may not function properly.
• This player does not convert 2D content into
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
3D.
• "Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
Copyright
• Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user's
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
• A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
• Do not use the 3D Active Glasses for other
purposes (Such as general eyeglasses,
sunglasses, protective goggles, etc.)
|
4
English
Contents
SAfETy INfORMATION
SETTINGS
2
3
3
3
3
4
4
Warning
17 The Initial Settings procedure
precautions
17 The Home Screen
Important Safety Instructions
18 Accessing the Settings Screen
disc Storage & Management
Handling Cautions
Using the 3d function
Copyright
18
Buttons on the Remote Control Used for
the Settings Menu
19 Settings Menu Functions
24 Networks and the Internet
24
26
27
28
Configuring Your Network Connection
Wi-Fi Direct
Soft AP
GETTING STARTED
AllShare Settings
7
7
disc and Format Compatibility
28 Upgrading Software
Disc types and contents your player can
play
28
29
29
29
30
By Online
By USB
7
8
8
9
Disc types your player cannot play
Region Code
By Disc
By Downloaded
Standby Mode Upgrade
Logos of discs the player can play
Supported Formats
11 Accessories
12 Front panel
12 Rear panel
MEDIA PLAy
13 Remote Control
31 playing Commercial Video discs
13
Tour of the Remote Control
31 The AllShare play Screen
31
31
Accessing the AllShare Play Screen
The AllShare Play Screen at a Glance
CONNECTIONS
31 playing Files on a USB device or USB
Compatible Mobile phone
14 Connecting to a TV
32 playing Commercial Audio discs
15 Connecting to an Audio System
32
Music Screen Controls
15
15
Method 1 Connecting to an HDMI
33 playing a disc with User Recorded
supported AV receiver
Content
Method 2 Connecting to an AV receiver
33 Using the AllShare Network Function
with Dolby Digital or DTS decoder
33
34
To Download the AllShare Software
16 Connecting to a Network Router
Playing Content Located on Your PC or
DLNA Device through the Blu-ray Disc
Player
16
16
Wired Network
Wireless Network
34
Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
|
English
5
Contents
35 Controlling Video playback
APPENDIx
35
Buttons on the Remote Control used for
Video Playback
46 Compliance and Compatibility Notice
35
Using the Tools Menu
47 Copy protection
37 Controlling Music playback
47 Network Service disclaimer
48 License
37
Buttons on the Remote Control used for
Music Playback
50 Additional Information
37
37
37
38
38
Using the Tools Menu
Repeating Tracks on an Audio CD
Shuffling Tracks on an Audio CD
Creating a Playlist from a CD
Ripping
50
52
53
Note
Resolution according to the contents type
Digital Output Selection
54 Troubleshooting
56
Repairs
39 playing photo Contents
57 Specifications
39
Using the Tools Menu
39 Using the Tools Menu when a file is
highlighted
NETWORK SERvICES
42 Using Smart Hub
42
43
Smart Hub at a Glance
Using the Web Browser
44 Bd-LIVE™
44 Using disc to digital
45
45
Registering a DVD Movie in Disc to Digital
Playing a Registered Disc to Digital Movie
|
6
English
Getting Started
Disc and format Compatibility
disc types and contents your player can play
Media
Disc Type
Details
Blu-ray Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
3D Blu-ray Disc
DVD-VIDEO
DVD-RW
DVD-R
VIDEO
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been recorded and
finalized, or a USB storage media containing MKV, MP4 contents.
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing MP3 or WMA contents.
MUSIC
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing JPEG contents.
| NOTE |
\ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
\ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
\ Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 25 Mbps.
\ Playback may not work for some types of discs, or when you use specific functions, such as angle change and aspect ratio
adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
disc types your player cannot play
• HD DVD
• DVD-RAM
• DVD-RW(VR mode)
• 3.9 GB DVD-R for
Authoring.
• DVD-ROM/PD/
• Super Audio CD
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
MV, etc
(except CD layer)
(CD-Gs play audio only,
not graphics.)
|
English
7
Getting Started
Region Code
Logos of Discs the player can play
Both players and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this player is displayed on
Blu-ray Disc
BD-LIVE
3D Blu-ray Disc
the rear panel of the player.
Region
Disc Type
Area
Code
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
NTSC broadcast system in
U.S.A, Canada, Korea, Japan
A
Blu-ray Disc
b
India, China, Russia, Central and
South Asia.
C
1
2
3
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
DVD-VIDEO
4
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
5
6
China
|
8
English
Supported Formats
Video File Support
Frame rate
(fps)
File Extension
Container
Video Codec
Resolution
Bitrate (Mbps) Audio Codec
*.avi
*.mkv
*.asf
MPEG4 SP/ASP
20
1920x1080
720x480
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
H.264 BP/
MP/HP
Dolby Digital
LPCM
AAC
25
10
*.wmv
*.mp4
*.3gp
*.vro
6~30
H.263
HE-AAC
WMA
Window
*.mpg
*.mpeg
*.ts
DD+
Media Video v9
25
20
1920x1080
MP3
24/25/30
24/25/3
MPEG2
MPEG1
DTS
TS
*.tp
352x288
*.trp
` Limitations
- Even when a file is encoded by a supported codec listed above, the file might not be played if its
content is defective or corrupted.
- Normal playback is not guaranteed if the file's container information is wrong or the file itself is
corrupted.
- Files having higher bit or frame rates than standard may stutter when played back.
- The seek (skip) function is not available if the file's index table is damaged.
- When you playback a file remotely through a network connection, video playback may stutter
depending on the network speed.
- Some USB/Digital camera devices may not be compatible with the player.
` Video decoder
- Supports up to H.264 Level 4.1
- Does not support GMC 2 or higher
` Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA 9 PRO multi-channel or lossless audio if the number of channels is more than 2.
- Does not support WMA sampling rate of 22050Hz mono.
|
English
9
Getting Started
` Comments
• The player does not support the PTP protocol.
• Do not disconnect a USB device during a
- MPEG4 : Supports up to GMC 1-Warping Point.
"loading" process.
- H.264 : Supports up to BP/MP/HP Level 4.1.
• The bigger the image resolution, the longer the
- H.263 : Supports up to Profile3, restricted up to
SD resolution.
image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
- WMV : Supports V9, VC1 SP/MP/AP L3.
- MPEG1 : Does not support D-picture.
- MPEG2 : Supports up to Hight Profile High
• Your player only supports video that is under
Level.
30fps (frame rate).
| NOTE |
• Your player only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
\ Some MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
• Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this player.
Music File Support
File
Audio
Codec
• If some USB devices require excessive power,
Container
Support Range
Extension
they may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a
wall socket.
*.mp3
MP3
-
MP3
* Sampling rates (in
kHz) - 8, 11, 16,
22, 32, 44.1, 48
If the problem continues, contact the USB HDD
manufacturer.
*.wma
WMA
WMA
• You must remove the USB storage device
safely. (by performing the "Safely Remove
USB" function to prevent possible damage to
the USB memory.)
* Bitrates - All bit-
rates in the range
5kbps to 384kbps
Press the HOME button to move to the home
screen, press the YELLOW (C) button, and
Notes on the USB connection
then press the
button.
v
• Your player supports USB storage media, MP3
• SAMSUNG is not responsible for any data file
players, digital cameras, and USB card readers.
damage or data loss.
• Some USB/digital camera devices may not be
• Your player does not support compression file,
compatible with the player.
sparse file and encryption file of NTFS.
• Your player supports the FAT16, FAT32, and
- Before disconnecting a USB device, please
use USB Safety Removal.
NTFS files systems.
• Connect USB devices directly to the player's
USB port. Connecting through a USB cable
may cause compatibility problems.
- If you don't use USB Safety Removal, your
data on USB device can be corrupted or lost
- You can repair or format a USB device on
your Desktop PC. (MS-Windows OS only)
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
|
10
English
AVCHd (Advanced Video Codec High definition)
• This player can play back AVCHD format discs. These discs are normally recorded and used in
camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional
image compressing format.
• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that use
"x.v.Color" format.
• "x.v.Color" is a trademark of Sony Corporation.
• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
| NOTE |
\ Some AVCHD format discs may not play, depending on the recording conditions.
AVCHD format discs need to be finalized.
\ "x.v.Color" offers a wider color range than normal DVD camcorder discs.
Accessories
Check for the supplied accessories shown below.
Batteries for Remote Control (AAA Size)
(BN43-00004A)
User Manual
(AK68-02228A)
SOURCE
VOL
VOL
+
–
VV–
S
A
M
S
U
N
G
T
V
1
4
2
5
8
0
3
6
9
7
DISC MENU
TITLE MENU
POPUP
HOME
SMART
HUB
TOOLS
INFO
RETURN
EXIT
A
B
C
D
Disc2Digital ANDORA SUBTITLE FULL
P
I
S
CR
E
E
N
Quick Guide
Remote Control
(AK59-00145A)
(AK68-02232C)
|
English
11
Getting Started
front Panel
OPEN/CLOSE BUTTON
DISPLAY
PLAY/PAUSE BUTTON
POWER BUTTON
USB HOST
REMOTE CONTROL SENSOR
DISC TRAY
| NOTE |
\ To upgrade the player's software through the USB Host jack, you must use a USB memory stick.
\ When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the
remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
button.
v
Rear Panel
LAN
HDMI OUT
DIGITAL AUDIO OUT
|
12
English
Remote Control
Tour of the Remote Control
After setup, allows you to set the input
source on your TV.
SOURCE
(This button is only available in samsung TV.)
Turn the TV on and off.
(This button is only available in samsung TV.)
Turn the player on and off.
VOL
VOL
+
TV volume adjustment.
–
+ –
(This button is only available in samsung TV.)
SAMSUNG TV
Press to open and close the disc tray.
1
4
2
5
8
0
3
6
Press numeric buttons to operate options.
7
TITL9E MENU
POPUP
DISC MENU
Use to enter the disc menu.
Use to enter the Popup menu/Title menu.
Press to search backwards or forwards.
Press to pause a disc.
Press to play a disc.
Press to skip backwards or forwards.
Press to stop a disc.
HOME
SMART
Press to move to the home screen.
Press to use Netflix.
HUB
Press to use Smart Hub.
TOOLS
INFO
Use to display the playback information.
Press to use the Tools menu.
Use to select menu items and change
menu values.
RETURN
EXIT
Return to the previous menu.
Press to exit the menu.
A
B
C
D
These buttons are used both for menus
on the player and also several Blu-ray Disc
functions.
Disc2Digital
SUBTITLE FULL
SCREEN
PANDORA
Press to use Disc to Digital function.
Press to use full screen function.
Press to use Pandora.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
| NOTE |
Installing batteries
\ If the remote does not operate properly:
-
-
-
-
Check the polarity +/– of the batteries.
Check if the batteries are drained.
Check if the remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
| CAUTION |
\ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
|
English
13
Connections
Connecting to a Tv
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Audio
Video
| NOTE |
\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player
to an audio system to hear audio.
\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\ When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player
automatically sets the HDMI output resolution to the highest supported by the TV.
\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
\ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI cable.
\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
|
14
English
Connecting to an Audio System
You can connect the Blu-ray player to an the audio system using the method illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HdMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with dolby digital or dTS decoder
• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the product
to the Digital Coaxial In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Method 1
Audio
Method 2
Audio
|
English
15
Connections
Wireless Network
Connecting to a Network Router
You can connect your player to your network
router using one of the methods illustrated below.
To use the AllShare network functionality, you
must connect your PC to your network as shown
in the illustrations.
The connection can be wired or wireless.
Wireless Router
Wired Network
Broadband
service
Broadband modem
(with integrated router)
| NOTE |
Broadband
\ If your wireless router supports DHCP, this player can use
a DHCP or static IP address to connect to the wireless
network.
service
Or
\ Set your wireless router to Infrastructure mode. Ad-hoc
mode is not supported.
Router
\ The player supports only the following wireless security
key protocols:
-
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Broadband
service
\ Select a channel on the wireless router that is not
currently being used. If the channel set for the wireless
router is currently being used by another device nearby, it
will result in interference and communication failure.
Broadband
modem
\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
or router to WEP, TKIP or TKIP-AES (WPS2Mixed), the
player will not support a connection in compliance with
new Wi-Fi certification specifications.
| NOTE |
\ Internet access to Samsung's software update server
may not be allowed, depending on the router you use or
your ISP's policy. For more information, contact your ISP
(Internet Service Provider).
\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by other
radio devices, etc).
\ DSL users, please use a router to make a network
connection.
|
16
English
Settings
The Initial Settings Procedure
The Home Screen
• The Home screen will not appear if you do not
configure the initial settings.
Settings
• The OSD (On Screen Display) may change in this
Set various functions to suit your personal preferences.
player after you upgrade the software version.
• The access steps may differ depending on the menu
3
4
you selected.
1
2
Smart Hub
AllShare Play
Disc to Digital
The Initial Settings Procedure lets you set the OSD
and menu languages, configure the connection
to your home network, choose the aspect ratio
output (screen size and format) that is correct for
your TV, and apply an upgrade to your player's
software, if one is available.
b
Disc to Digital FAQs
d
WPS(PBC)
5
Smart Hub : Starts Smart Hub. From Smart Hub,
1
you can access YouTube, games, and other apps.
For complete Initial Settings instructions, see the
Quick Start Guide.
AllShare Play : Play videos, photos or music
2
3
content from Disc, USB, PC or mobile devices.
| NOTE |
Disc to Digital : Upload DVD movies to your
\ If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings later.
See "Configuring Your Network Connection" on pages
24~26 for instructions.
personal Internet Disc to Digital repository. Once
movies are uploaded, they can be streamed to other
devices connected to the Internet.
\
If you want to display the Initial Settings screen again and
make changes, select Settings > System > Initial Settings in
the Home screen or select the Reset option. (See pages 21
or 23)
Settings : Set various functions to suit your
4
5
personal preferences.
Displays the colored buttons on your remote that
you can press to access or perform functions.
\ If you want to use an Anynet+(HDMI-CEC) function,
please follow the instructions below.
` Selecting an Option on the Home Screen
1) Connect the player to an Anynet+(HDMI-CEC)-
compliant Samsung TV using HDMI Cable.
4. To select an option on the Home screen,
move the cursor using the ◄► buttons until
it highlights the option of your choice, and
2) Set the Anynet+(HDMI-CEC) feature to On in both the
TV and the player.
then press the
button.
v
3) Set the TV to the Initial Settings Procedure.
| NOTE |
\
If you leave the player in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the player is left in the screen saver mode for
more than 20 minutes, the power will automatically turn off.
|
English
17
Settings
Detailed Function Information
Accessing the Settings Screen
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◄► buttons to select the
function, menu item, or option. The explanation
will usually appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
1. Select Settings on the Home screen, and
then press
appears.
button. The Settings screen
v
3D Settings
Display
Audio
TV Aspect Ratio
Smart Hub Screen Size
BD Wise
16:9 Original
Size 3
On
Resolution
Auto
Network
System
Support
Movie Frame (24Fs)
HDMI Color Format
HDMI Deep Color
Progressive Mode
Auto
Auto
Auto
Auto
2. To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
Buttons on the Remote Control Used
for the Settings Menu
HOME
SMART
HUB
1
TOOLS
INFO
3
4
RETURN
EXIT
2
HOME Button : Press to move to the Home screen.
1
RETURN Button : Return to the previous menu.
2
3
4
(Enter) / DIRECTION Buttons :
v
• Press ▲▼◄► to move the cursor or select an
item.
• Press the
button to activate the currently
v
selected item or confirm a setting.
EXIT Button : Press to exit the current menu.
|
18
English
Settings Menu functions
Select whether to play a Blu-ray Disc with 3D contents
in 3D Mode.
Display
3d Settings
•
If you move to the Home or Smart Hub Home
screen while in 3D mode, the player will switch to 2D
automatically.
Lets you adjust the output of the player to the screen
TV Aspect Ratio
size and screen format of your TV.
Lets you select the optimal size for the Smart Hub
Screen.
Smart Hub Screen Size
BD Wise is Samsung's latest inter-connectivity feature.
When you connect a Samsung player and a Samsung
TV with BD Wise to each other via HDMI, and BD Wise
is on in both the player and TV, the player outputs video
at the video resolution and frame rate of the Blu-ray
Disc/DVD.
Bd Wise
Set the output resolution of the HDMI video signal to
Auto, 1080p, 1080i, 720p or 480p.
The number indicates the number of lines of video per
frame.
Resolution
The i and p indicate interlaced and progressive scan,
respectively. Generally, the higher quality.
If the player is connected to a 24Fs compatible TV,
setting the Movie Frame (24Fs) feature to Auto lets the
player adjust its HDMI output to 24 frames per second
automatically for improved picture quality.
Movie Frame (24Fs)
HdMI Color Format
•
•
You can enjoy the Movie Frame (24Fs) feature only on
a TV supporting this frame rate.
Movie Frame is only available when the player is in the
HDMI 1080i or 1080p output resolution modes.
Lets you set the color space format for the HDMI output
so that it matches the capabilities of the connected
device (TV, monitor, etc). The screen goes black
momentarily after you have selected a format.
Lets you set the product to output HDMI video with
Deep Color. Deep Color provides more accurate color
reproduction with greater color depth.
HdMI deep Color
progressive Mode
Lets you improve picture quality when viewing DVDs.
|
English
19
Settings
Lets you select the digital audio output format that is
suitable for your TV or AV Receiver. For more details,
see the digital output selection table on page 53.
Audio
digital Output
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are outputted to an
amplifier. Choose On if your amplifier or receiver is not
compatible with a 96Khz signal.
pCM downsampling
Lets you apply dynamic range control to Dolby Digital,
Dolby Digital Plus, and Dolby True HD audio.
ꢀ
Auto : Automatically controls the dynamic range of
Dolby TrueHD audio, based on information in the
Dolby TrueHD soundtrack. Also turns dynamic range
control on for Dolby Digital and Dolby Digital Plus.
dynamic Range Control
ꢀ
ꢀ
Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder and
the volume of loud sounds is reduced.
Lets you select the multi-channel downmix method that
is compatible with your stereo system. You can choose
to have the player downmix to normal stereo or to
surround compatible stereo.
downmixing Mode
Configure the network connection so you can enjoy
various features such as Internet services or AllShare
Wi-Fi functionality, and perform software upgrades.
Network
Network Settings
Network Status
Lets you check the current network and Internet status.
Lets you connect a Wi-Fi Direct device to the player
using a peer-to-pear network, without the need for a
wireless router. You can use the device to control the
player. Note that if you set the Quick Start option to On
(See page 21), that Wi-Fi devices connected to your
player through WI-Fi Direct and Soft AP (See page 21)
will maintain their Wi-Fi connections even when the
player is off.
Wi-Fi direct
|
20
English
Lets you connect other types of Wi-Fi devices to the
player wirelessly. Requires that you create a security key
which you must enter into the other Wi-Fi devices when
you are connecting them to the network.
Network
Soft Ap
Lists network connected AllShare devices and lets you
control whether each device (a smartphone, a tablet,
etc.) can share content with or control the player.
AllShare Settings
device Name
Lets you input a name for the player that will identify it
on your networks.
Set various BD-Live function. BD-Live allows you to
access extra features available on some Blu-ray Discs if
you are connected to the Internet.
Bd-Live Settings
ꢀ
Bd-Live Internet Connection : Lets you fully allow,
partly allow, or prohibit a BD-Live Internet connection.
ꢀ
Bd data Management : Manage BD data
downloaded from a BD-Live service or Blu-ray Disc.
Lets you select your default Disc to Digital application
after you have downloaded it. For more information
about Disc to Digital, see pages 44~45.
disc to digital App
| NOTE |
\ Disc to Digital lets you upload DVD movies to your own
personal, Internet Disc to Digital repository and then stream
them in HD format to other Internet connected devices.
Lets you re-run the Initial Settings procedure. See the
Quick Start Guide for details.
System
Initial Settings
Quick Start
Lets you set the player to turn on quickly by decreasing
the boot time.
| NOTE |
\ If this function set to On, Standby power consumption will be
increased.
|
English
21
Settings
Anynet+ is a convenient function that offers linked
operations with other Samsung players that have the
Anynet+ feature and lets you control those products
with one Samsung TV remote. To operate this function,
you must connect this player to an Anynet+ Samsung
TV using an HDMI cable.
System
Anynet+(HdMI-CEC)
You can connect a wireless USB keyboard or mouse to
the USB port on the front of the player.
ꢀ
Keyboard Settings : Lets you configure a wireless
USB keyboard connected to the player.
| NOTE |
\ You can use the keyboard only when a QWERTY keyboard
screen or window appears in the Web Browser.
ꢀ
Mouse Settings : Lets you configure a wireless USB
mouse connected to the player. You can use the
mouse in the player's menu in the same way you use
a mouse on your PC.
` To use a mouse with the player's menu:
device Manager
1. Connect the USB mouse to the player.
2. Click the primary button you selected in Mouse
Settings. The Simple Menu appears.
3. Click the menu options you want.
| NOTE |
\ For information about compatible USB HID keyboards and
\ Some HID keyboard keys may not work.
\ Wired USB keyboards are not supported.
\ Some applications may not be supported.
\ If a wireless HID Keyboard does not operate because of
interference, move the keyboard closer to the player.
You can select the language you prefer for the On-
screen menu, disc menu, subtitles, etc.
Language
•
The language you select for the disc menu, disc
audio, or subtitles will only appear if it is supported on
the disc.
|
22
English
The default PIN is 0000. Enter the default PIN to access
the security function if you haven't created your own
PIN. After you have accessed the security function for
the first time, change the PIN using the Change PIN
function.
System
ꢀ
ꢀ
ꢀ
Bd parental Rating : Prevents playback of Blu-ray
Discs with a rating equal to or above a specific age
rating you enter unless the PIN is entered.
dVd parental Rating : Prevents playback of DVDs
with a rating above a specific numerical rating you
select unless the PIN is entered.
Security
General
Change pIN : Change the 4-digit PIN used to access
security functions.
` If you forget your PIN:
1. Remove any disc or USB storage device.
2. Press and hold the
p
button on the front panel
for 5 seconds or more.
All settings will revert to the factory settings.
You can change the options listed below to match your
preferences.
ꢀ
ꢀ
Time Zone : Select the time zone in which you live.
menu box.
Menu Transparency : Adjust the transparency of the
For more information about the Software Upgrade
function, see "Upgrading Software" on pages 28~30.
Support
Software Upgrade
Provides contact information for assistance with your
Contact Samsung
player.
When activated, lets Samsung Call Center agents
diagnose and fix problems with the product remotely.
Requires an active Internet connection.
| NOTE |
Remote Management
Reset
\ Remote Management service might not be available in some
countries.
\ Contact your nearest service center for your PIN code and tell
the code to the person in charge. It enables remote diagnosis
of the product and required measures.
Resets all settings to their default settings except for the
network and Smart Hub settings.
The default security PIN is 0000.
|
English
23
Settings
Ğ
Wired - Manual
Networks and the Internet
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
When you connect this player to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the player's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
42~45. Instructions for configuring the network
connection start below.
After following Steps 1 to 3 above:
1. Select Start in the Network Settings screen,
and then press the
button.
v
The Network Status screen appears.
The player attempts to verify the network
connection and fails.
Configuring Your Network Connection
Network Settings
Wired network connection failed.
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
MAC Address
IP Address
Subnet Mask
Gateway
XX:XX:XX:XX:XX:XX
0.0.0.0
Previous
IP Settings
Retry
0.0.0.0
0.0.0.0
DNS Server
0.0.0.0
Unable to connect to the network. Try the following:
- check if your IP address is set correctly in IP Settings.
OK
If you are connecting to a wired network, connect
the player to your router using a LAN cable before
you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.
-
Contact your Internet Service Provider for more information.
2. Select Ip Settings on the right of the screen,
and press the
button.
v
To begin configuring your network connection,
The IP Settings screen appears.
follow these steps:
3. Select the Ip Mode field, and then set it to
1. In the Home screen, select Settings, and
Manual.
then press the
button.
v
4. Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
2. Select Network, and then press the
v
button.
3. Select Network Settings, and then press the
button.
v
| NOTE |
4. Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks starting on page 25.
\ You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 25.
Wired Network
5. When done, highlight OK, and then press
Ğ
Wired - Automatic
button. The player verifies the network
v
connection and then connects to the
After following Steps 1 to 3 above:
network.
1. Select Start in the Network Settings screen,
and then press the
button. The player
v
detects the wired connection, verifies the
network connection and then connects to the
network.
|
24
English
Ğ
Wireless (General) - Automatic
< Getting the Network Settings Values >
After followng Steps 1 to 3 in "Configuring Your
Network Connection" on page 24.
1. Select Start in the Network Settings screen,
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
and then press the
button.
v
• Windows XP
The player searches for and then displays a
1. Right click the Network icon on the bottom
list of the available networks.
right of the Windows desktop.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support
Network Settings
tab.
Select your wireless router from the list:
1/10
4. On the Support tab, click the Details button.
iptime23
Refresh
ELT
WPS(PBC)
Previous
Next
The Network settings are displayed.
JSY
• Windows 7
KT_WLAN_C361
Mirhenge_edu
SO070VOIP
Cancel
1. Click the Network icon on the bottom right of
the Windows desktop.
2. In the pop-up menu, click Network and
Sharing Center.
2. Select the desired network, and then press
3. On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
the
button.
v
3. Select Next, and then press the
button
v
again.
4. On the Security screen, enter your network's
4. On the Support tab, click the Details button.
Security Code or Pass Phrase.
The Network settings are displayed.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
| NOTE |
\ Depending on your Windows version, the information may
differ.
then pressing
button.
v
5. When done, select Next at the right of the
screen. The player verifies the network
connection and then connects to the
network.
Wireless Network
You can setup a wireless network connection in
three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
| NOTE |
\ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
When you configure the wireless network
connection, any wireless network devices currently
connected through the player or, if applicable,
the player's current wired connection, will be
disconnected.
Ğ
Wireless (General) - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After folloiwng Steps 1 to 3 in "Configuring Your
Network Connection" on page 24.
|
English
25
Settings
Ğ
1. Select Start in the Network Settings screen,
WpS(pBC)
and then press the
button. The player
v
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a WPS(PBC)
button, follow these steps:
searches for and then displays a list of the
available networks.
2. Select the desired network, and then press
the
button.
v
1. Open the Home screen.
3. Select Next, and then press the
button
v
2. Press the BLUE (d) button on the remote
again.
control.
4. On the Security screen, enter your network's
3. Press the WpS(pBC) button on your router
within two minutes. Your player automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the ▲▼◄► buttons,
and then pressing the
button.
v
5. When done, select Next at the right of the
screen, and then press the
button.
v
Wi-Fi direct
6. The Network Status screen appears.
The player attempts to verify the network
connection and fails.
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the player and each other
using a peer-to-peer network, without a wireless
router.
7. Select Ip Settings on the right of the screen,
and press the
button. The IP Settings
v
screen appears.
1. Turn on the Wi-Fi direct device and activate
8. Select the Ip Mode field, and then set it to
its Wi-Fi Direct function.
Manual.
2. In the Home screen, select Settings, and
9. Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
then press the
button.
v
3. Select Network, and then press the
v
button.
4. Select Wi-Fi direct, and then press the
v
| NOTE |
button.
\ You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 25.
The Wi-Fi Direct devices that you can
connect appear.
Wi-Fi Direct
10. When done, highlight OK, and then press
v
Device Name : [BD]E5900
button. The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Disconnected
Refresh
Close
is done, highlight OK, and then press
v
button.
m
Move
"
Enter
'
Return
|
26
English
5. You have three ways to complete the Wi-Fi
4. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
connection:
• Through the Wi-Fi device.
• Through the player using PBC.
| NOTE |
• Through the player using a PIN.
\ The wired or wireless network connection will be
Each is covered below.
disconnected when you use the Wi-Fi Direct function.
Through the Wi-Fi Device
Soft Ap
1. On the Wi-Fi device, follow the procedure on
the device for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
Soft AP lets you connect other Wi-Fi devices to
your network through the player and lets them
access the Internet.
It requires that you create a security key which you
must enter into the other Wi-Fi devices when you
are connecting them to the network.
2. When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
1. In the Home screen, select Settings, and
and then press the
button to accept.
v
then press the
button.
v
3. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
2. Select Network, and then press the
v
button.
3. Select Soft Ap, and then press the
v
button.
4. Select On or Off, and then press the
Through the Player Using PBC
v
button.
1. Select the Wi-Fi Direct device you want to
connect to this player, and then press the
< To Set the Soft Ap Security Key >
v
button. The PBC/PIN pop up appears.
1. On the Soft AP screen, select Security Key,
2. Select pBC, and then press the
button.
v
and then press the
button. The Security
v
The PBC pop-up appears.
Key screen appears.
3. Press the pBC button on the Wi-Fi Direct
2. On the Security key screen, enter a security
key. Enter numbers directly using the number
buttons on your remote control. Enter
device within 2 minutes.
4. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the
button.
v
3. When done, use the the ▲▼◄► buttons to
move to dONE at the bottom of the screen,
Through the Player Using a PIN
and then press the
button.
v
1. Select the Wi-Fi Direct device you want to
When you connect a Wi-Fi device through the
connection procedure on the device, you must
enter the security key you created here into the
appropriate field.
connect to this player, and then press the
v
button. The PBC/PIN pop up appears.
2. Select pIN, and then press the
button.
v
The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
|
English
27
Settings
4. Select one of the following methods:
AllShare Settings
• By Online
The AllShare Settings screen lists your network
connected AllShare devices and their IP
addresses. Through this screen, you can allow
a device to access the player, deny access, or
delete the device from the AllShare list.
• By USB
• By Disc
• By Downoaded
• Standby Mode Upgrade
1. In the Home screen, select Settings, and
5. Press the
button.
v
then press the
button.
v
| NOTE |
2. Select Network, and then press the
v
button.
\ The upgrade is complete when the player turns off, and
then turns on again by itself.
3. Select AllShare Settngs, and then press the
button.
\ Samsung Electronics shall takes no legal responsibility
for player malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
v
4. Select a device, and then press the
v
button. The AllShare Settings pop-up
appears.
\ If you want to cancel the upgrade while the upgrade
5. Select Allow, deny, or delete from List, and
software is downloading, press the
button.
v
then press the
button.
v
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see page 31.
By Online
Your player must be connected to the Internet to
use the By Online function.
1. Select By Online, and then press the
v
button. The Connecting to Server message
Upgrading Software
appears.
2. If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
The Software Upgrade menu allows you to
upgrade the player's software for performance
improvements or additional services.
3. When the download is complete, the
Upgrade Query window appears with three
choices: Upgrade Now, Upgrade Later, or
Don't Upgrade.
• Never turn the player off or back on manually during
the update process.
1. In the Home screen, select the Settings, and
4. If you select Upgrade Now, the player
upgrades the software, turns off, and then
turns on automatically.
then press the
button.
v
2. Select Support, and then press the
v
button.
5. If you do not make a selection in one minute
or select Upgrade Later, the player stores
the new upgrade software. You can upgrade
the software later using the By Downloaded
function.
3. Select Software Upgrade, and then press
the
button.
v
6. If you select Don't Upgrade, the player
cancels the upgrade.
|
28
English
By USB
By disc
1. Follow Steps 1 through 7 in By USB.
2. Click SUppORT on the top right of the page.
2. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
3. Enter the product's model number into the
search field, and then click Find product.
3. Write the folder onto a disc. We recommend
4. Click Get downloads in the center of the
a CD-R or DVD-R.
page below the Downloads header.
4. Finalize the disc before you remove it from
5. Click Firmware in the center of the page.
your computer.
6. Click the ZIp icon in the File column on the
5. Insert the disc into the player.
right side of the page.
6. In the player's menu, go to Settings >
7. Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
Support > Software upgrade.
7. Select By disc.
8. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
| NOTE |
\ When the system upgrade is done, check the software
details in the software Upgrade menu.
9. Copy the folder to a USB flash drive.
\ Do not turn off the player during the Software Upgrade.
10. Make sure no disc is inserted in the player,
and then insert the USB flash drive into the
USB port of the player.
It may cause the player malfunction.
By downloaded
11. In the player's menu, go to Settings >
The By Downloaded option lets you upgrade
using a file the player downloaded earlier but
you decided not to install immediately or a file
downloaded by the player in Standby Mode.
Support > Software Upgrade.
12. Select By USB.
| NOTE |
\ There should be no disc in the player when you upgrade
1. If upgrade software has been downloaded,
you will see the software version number to
the right of By Downloaded.
the software using the USB Host jack.
\ When the software upgrade is done, check the software
details in the software Upgrade menu.
2. Select By downloaded, and then press the
button.
v
\ Do not turn off the player during the software upgrade.
It may cause the player to malfunction.
3. The player displays a message asking if you
want to upgrade. Select Yes. The player
begins the upgrade.
\ Software upgrades using the USB Host jack must be
performed with a USB flash memory stick only.
4. When the update is complete, the player
turns off automatically, and then turns on.
| NOTE |
\ When the system upgrade is done, check the software
details in the software Upgrade menu.
\ Do not turn off the player during the software Upgrade.
It may cause the player to malfunction.
|
English
29
Settings
Standby Mode Upgrade
You can set the Standby Mode Upgrade function
so that the player downloads new upgrade
software when it is in Standby mode.
In Standby mode, the player is off, but its Internet
connection is active. This allows the player to
download upgrade software automatically, when
you are not using it.
1. Press the ▲▼ buttons to select Standby
Mode Upgrade, and then press the
v
button.
2. Select On or Off.
If you select On, the player will automatically
download new upgrade software when it
is in Standby mode with the power off. If it
downloads new upgrade software, the player
will ask you if you want to install it when you
turn the player on.
| NOTE |
\ To use Standby Mode Upgrade function, your player must
be connected to the Internet.
|
30
English
Media Play
Your Blu-ray Disc Player can play content located
on Blu-ray/DVD/CD discs, USB devices, PCs, and
DLNA compatible cell phones. To play content
located on your PC or on a DLNA compatible cell
phone, you must connect your PC and the player
to your network and download and install the
AllShare network software on your PC.
Accessing the AllShare play Screen
To access the AllShare Play Main screen, select
AllShare Play on the Home screen, and then press
the
button.
v
The AllShare play Screen at a Glance
AllShare Play / Videos /
Disc
Playing Commercial video Discs
My List
Videos
Photos
Music
1
2
No Disc inserted.
1. Press the
8
button to open the disc tray.
USB
2. Push a disc gently into the disc tray with the
There is no connected device.
There is no device connected.
3
4
disc’s label facing up.
DLNA
a
Login
'
Return
My List : Lists recently played or viewed files. If the
device or media containing files listed in My List is
inserted into or connected to the player, you can
use My List to play or view those files.
1
Contents Type : Lets you select the type of content
3. Press the
8
button to close the disc tray.
2
3
4
to view or play: Videos, Photos, or Music.
Playback starts automatically.
Device Type : Lets you select the device or media
4. If playback does not start automatically, press
where the content is located.
the
6
button on the remote or see “The
AllShare Play Screen” below.
Displays the colored buttons on your remote that
you can press to access or perform functions.
The AllShare Play Screen
| NOTE |
For all media, except for commercail video discs,
the AllShare Play Main Screen or one of its
subscreens is your primary means of accessing
and selecting content to view or play. For example,
if you connect a USB device to the player, the
player will display the content located on the USB
device on the AllShare Play USB screen.
\
If the player is not connected to the network, My List is not
displayed.
\
The AllShare Play screen will only display files of the
Content Type you selected. For example, if you select
Music, you will only be able to see music files. If you open
folders labeled Photos or Videos, no files will be displayed.
To view other types of files, select a different Content Type.
| NOTE |
\
You can use the AllShare Play Screen to access a
commercial video disc. For example, when you stop a
movie, but leave the disc in the player, you can start it
again using the AllShare Play Screen. However, unlike
other media, when you insert a commercial video disc,
it bypasses the AllShare Play Screen and starts playing
automatically.
Playing files on a USb Device or
USb Compatible Mobile Phone
There are two methods you can use to play or
view multimedia files located on a USB device
or USB compatible mobile phone through your
player.
|
English
31
Media Play
6. If necessary, use the the ▲▼◄► buttons
Method 1
to select a folder, and then press the
v
1. Turn the player on.
button.
2. Connect the USB device or mobile phone to
the USB port on the front panel of the player.
The New Device Connected pop-up appears.
7. Use the ▲▼◄► buttons to select a file to
view or play, and then press the
button.
v
8. Press the RETURN button to exit a folder or
to return to Home screen.
| NOTE |
\ To remove the USB storage device, you must use the
“Safely Remove USB” function to prevent possible
damage to the USB memory. Press the HOME button to
move to the Home screen, press the YELLOW (C) button,
New device connected.
m80
Videos
Photos
Music
and then press the
button.
v
"
Enter
'
Return
\ If you insert a disc when playing a USB device or phone,
the device mode changes to "Disc" automatically.
\ If your mobile phone is DLNA compatible, you can play
contents without connecting a USB cable. See "Using the
AllShare Network Function" on pages 33~34.
| NOTE |
\
If the pop-up does not appear, go to Method 2.
3. Use the ▲▼ buttons to select Videos,
Playing Commercial Audio Discs
Photos, or Music, and then press the
v
button. The AllShare Play screen appears
listing the content of the device or phone.
Depending on how the contents is arranged,
you will see either folders, individual files, or
both.
1. Place a pre-recorded, commercial audio disc
into the disc tray with the disc’s label facing
up, and then close the tray. The AllShare
Music screen appears listing the tracks.
Playback of the first track starts automatically.
4. Select a file to view or play, and then press
2. To play a particular track, use the ▲▼ buttons
the
button.
v
on the remote to select the track, and then
5. Press the RETURN button to exit a folder or
press the
button.
v
to return to the Home screen.
Music Screen Controls
Method 2
1/14
1. Turn the player on.
AllShare Play / Music /
Audio CD
02:38
TRACK 001
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
TRACK 009
TRACK 010
2. Connect the USB device or mobile phone to
03:17
05:21
05:34
02:54
03:44
04:07
03:42
03:15
03:16
the USB port on the front panel of the player.
3. Select AllShare play on the Home screen,
TRACK 001
and then press the
button.
v
4. On the left side, select Videos, Photos, or
00:03 / 02:38
Music, and then press the
button.
v
5. On the right side, select USB Flash Memory,
bc Page Move
/
Tools
'
Return
and then press the
button. The AllShare
v
Play screen appears listing the contents of
the device or phone. Depending on how the
contents are arranged, you will see either
folders, individual files, or both.
|
32
English
5. If you selected Photos, the AllShare Photos
screen appears listing the photos on the disc.
Use the ▲▼◄► buttons to select the photo
Pause a track.
Play a track.
Repeat one track or all tracks.
Play tracks in random order.
you want to view, and and then press the
v
button.
6. If you selected Videos, the AllShare Videos
screen appears listing the video files on the
disc. Use the ▲▼◄► buttons to select the
video you want to watch, and and then press
To access the controls, play a track, and then use
the ◄► buttons to move to the control of your
choice.
the
button.
v
| NOTE |
| NOTE |
\
For all folders, - Music, Photo, and Video - you can
also push the TOOLS button on your remote, and then
select Play Folder to play or view all the files in the folder
automatically. Select the folder first before pushing the
TOOLS button.
\
The Music Screen controls are only accessible when a
track is playing.
\
\
All controls do not appear at the same time.
For more information about playing music, go to
Controlling Music Playback on pages 37~38.
Using the AllShare Network
Playing a Disc with User Recorded
Content
function
AllShare lets you play Videos, Photos, or Music
located on your PC or your DLNA compatible
device through the player using a wireless network
connection.
You can play mulitmedia files you have recorded
on DVD or CD discs.
1. Place a user recorded disc into the disc
tray with the disc’s label facing up, and then
close the tray. The Device Connected pop-up
appears.
To download the AllShare Software
To use AllShare with your PC or DLNA device, you
must install AllShare software on your PC.
2. Use the ▲▼ buttons to select the type of
You can download the PC software and get
detailed instructions for using AllShare from the
Samsung.com website.
content you want to view or play - Videos,
Photos, or Music - and then press the
v
button.
| NOTE |
2. Click Support at the top of the page.
\
Even though the player will display folders for all content
types, it will only display files of the Content Type you
selected in Step 2. For example, if you selected music, you
will only be able to see music files. You can change this
selection on the AllShare Play main screen.
3. On the Support page, enter the model
number of your player into the Model Number
field, and then press the
button.
v
4. On the page that appears, click Get
downloads on the left side under Downloads.
The Download Center appears.
3. Use the ◄► buttons to select the folder
containing the content type you chose in
Step 2, and then press the
button.
v
5. On the Download Center page, click the
4. If you selected Music, the Allshare Music
screen appears listing the music files on the
disc. Use the ▲▼ buttons to select the file
Software tab.
6. On the software tab, click the File icon on the
right side of the AllShare line.
you want to play, and then press the
v
button.
|
English
33
Media Play
7. In the pop-up that appears, click Save File.
Controlling the playback of Content
Located on Your pC with Your Smart
phone
8. Find the AllShare install file on your disk, and
then double click the file.
9. In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
PC
Blu-ray Disc Player
Download the AllShare Installation/Instruction
manual from the same Software Tab by clicking
the corresponding PDF file symbol in the File
column on the right. The file, in PDF format, will
download and open. You can view and/or save
the file.
Play back
PC's files
AllShare
Control PC's files to
Blu-ray Disc Player
Connection
Smart Phone
playing Content Located on Your pC or
dLNA device through the Blu-ray disc
player
(Only available with Samsung phones supporting
AllShare functionality.)
1. Connect the Blu-ray Disc Player, your PC,
and your DLNA compatible cell phone to the
same wireless network.
PC
Blu-ray Disc Player
2. Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
Play back
PC's files
AllShare Connection
3. On your computer, using the AllShare
software, confirm your phone is connected.
1. Connect the Blu-ray Disc Player, your PC,
and/or your DLNA compatible cell phone to
the same wireless network.
4. On the phone, select the file you want to view
or play, and then select the Blu-ray player as
the playback device.
2. Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
5. On the phone, start playback.
3. Select AllShare play in the player's Home
screen, and then press the
button. The
v
AllShare Play screen appears.
4. Select the connected DLNA compatible
device or your PC, and then press the
v
button. A screen listing the available files
appears.
5. Select the file you want to play or view, and
then press the
button.
v
|
34
English
Controlling video Playback
You can control the playback of video content located on a DVD, USB, mobile device or PC. Depending
on the disc or contents, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video playback
„
Using the disc menu, title menu, popup
DISC MENU
TITLE MENU
menu, and title list
POPUP
0
DISC MENU
button
During playback, press this button to
display the Disc menu.
During playback, press this button to
display the Title menu.
TITLE MENU
button
• If your disc has a playlist, press the
„
playback related buttons
GREEN (B) button to go to the playlist.
The player does not play sound in Search, Slow or
Step mode.
POPUP MENU During playback, press this button to
button
display the Popup menu.
• To return to normal speed playback, press the
button.
6
button
button
button
Starts playback.
Stops playback.
Pauses playback.
During playback, press the
Using the Tools Menu
6
5
7
During playback, press the TOOLS button.
Play from the
Select to return to the beginning of the
or
Beginning
movie, and then press the button.
3
4
v
Fast Motion button.
If there is more than one movie on the
disc or device, select to start a different
title.
Play
Each time you press the
or
3
4
button, the playback speed will change.
In pause mode, press the
button.
4
4
1. Select Title Search, and then press
Slow Motion
Play
Title Search
Each time you press the
button, the
button.
the
button.
v
playback speed will change.
In pause mode, press the
2. Use the ▲▼ buttons to select
7
7
a title, and then press the
v
Step Motion
Play
Each time you press the
button, a
button.
new frame appears.
Select to play the chapter of your
During playback, press the
or
1
2
choice.
button.
Skip Motion
Play
1. Select Chapter Search, and then
Each time you press
or
button,
1
2
Chapter Search
press the
button.
v
the disc moves to the previous or next
2. Use the ▲▼ buttons to select a
chapter or file.
chapter, and then press the
v
button.
|
English
35
Media Play
Select to play the movie from a
Select to set the picture mode.
selected time point.
- Dynamic : Increases sharpness and
brightness.
1. Select Time Search, and then
- Standard : Choose this setting for
press the
button.
v
most viewing applications.
2. Using the number buttons, enter
- Movie : The best setting for
the time point you want to go to,
watching movies.
Time Search
and then press the
button.
Picture Mode
v
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
| NOTE |
\ You can also use the ◄► buttons
to advance or rewind the movie.
The movie advances or rewinds one
minute each tme you press the ◄
► buttons.
| NOTE |
\ When you use the BD wise function,
this menu will not appear.
Select to repeat a title, chapter, or
Select to set the desired audio
Audio
specific section.
language.
- Off : Select to return to normal
Select to set the desired subtitle
language.
playback.
- Title : Choose to repeat a selected
Subtitle
- You can also operate this function
by pressing the SUBTITLE button on
the remote control.
title.
- Chapter : Choose to repeat a
specific chapter.
Select to view a scene from another
angle. The Angle option displays the
number of angles available to view.
When a Blu-ray Disc/DVD contains
multiple angles of a particular scene,
you can change angle.
- Repeat A-B : Choose to repeat a
specific section.
Angle
1. Press the ▲▼ buttons to select
repeat A-B, and then press the
Repeat Mode
Full Screen
button.
v
2. Press the
button at the point
v
BONUSVIEW
Video
where you want repeat play to start
Select to set the desired bonusview
option.
(A). Let the movie play.
BONUSVIEW
3. Press the
button at the point
v
Audio
where you want repeat play to stop
(B).
| NOTE |
Go to Videos
List
Select to go to the list of videos on the
current media.
Select to view video file information.
\ You must set point (B) at least 5
seconds of playing time after point
(A).
Information
| NOTE |
\ Depending on the disc or storage device, the Tools menu
Select to change the full screen size.
may differ. See pages 39~41 for addtional options.
\ Video files with high bitrates of 20Mbps or more strain
the player's capabilities and may stop playing during
playback.
|
36
English
Controlling Music Playback
Genre
See pages 39~41.
Selection Play See pages 39~41.
You can control the playback of music content
located on a DVD, USB, mobile device or PC.
Go to Playlist
Rip
See pages 39~41.
Buttons on the Remote Control used
for Music playback
SAMSUNG TV
The Ripping function converts CD
audio to the mp3 format and saves
the converted files on a USB device
connected to the player. See Ripping
on page 38.
1
2
5
8
0
3
4
6
1
Select to see the (Contents)
Information
| NOTE |
information: File size, date created, etc.
7
9
DISC MENU
TITLE MENU
POPUP
4
\ Depending on the disc or storage device, the Tools menu
may differ. See pages 39~41 for addtional options.
5
6
Repeating Tracks on an Audio Cd
2
3
A
B
C
D
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1. During playback, use the ► button to select
NUMBER buttons : Press the number of a track.
1
2
in the lower right corner of the screen,
The selected track is played.
and then press the
button.
v
button : Stops a track.
5
2. Use the ▲▼ to select the repeat mode you
want - Off, One Song, or All - and then press
Skip : During playback, press the GREEN (B) or
YELLOW (C) button to move to the previous or next
page of the playlist.
the
button.
v
3
4
1/14
AllShare Play / Music /
Audio CD
02:38
Fast Play (Audio CD (CD-DA) only)
TRACK 001
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
TRACK 009
TRACK 010
03:17
05:21
05:34
02:54
03:44
04:07
03:42
03:15
03:16
During playback, press the
Each time you press the
or
button.
3
4
button, the
or
3
4
playback speed will change.
TRACK 001
: Pauses a track.
button : Plays the currently selected track.
5
6
7
00:03 / 02:38
6
bc Page Move
/
Tools
'
Return
Using the Tools Menu
During playback, press the TOOLS button.
Shuffling Tracks on an Audio Cd
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
View
See pages 39~41.
See pages 39~41.
See pages 39~41.
See pages 39~41.
See pages 39~41.
Folder view
Title
1. During playback, use the ► button to select
in the lower right corner of the screen,
and then press the
button.
v
Artist
2. Use the ▲▼ to set the Shuffle mode On or
Album
Off, and then press the
button.
v
|
English
37
Media Play
Creating a playlist from a Cd
Ripping
1. With the Playback screen displayed, press
1. Insert a USB device into the USB jack on the
the TOOLS button. The Tools menu appears.
front of the product.
2. Use the ▲▼ buttons to select Selection
2. With the Playback screen displayed, press
play, and then press the
button. The
the TOOLS button. The Tools menu appears.
v
Selection Play screen appears.
3. Use the ▲▼ buttons to select Rip, and
3. Use the ▲▼ buttons to select a track, and
then press the
button. The Rip screen
v
then press the
button. A check appears
appears.
v
to the left of the track.
4. Use the ▲▼ buttons to select a track, and
4. Repeat Step 3 to select and check additional
then press the
button. A check appears
v
tracks.
to the left of the track.
5. To remove a track from the list, move to the
5. Repeat Step 3 to select and check additional
track, and then press the
button again.
tracks.
v
The check on the track is removed.
6. To remove a track from the list, move to the
6. When done, press the ► button to select
track, and then press the
button again.
v
play, and then press the
button. The
The check on the track is removed.
v
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
7. When done, press the ► button to select
Rip, and then press the
pop-up appears.
button. The Rip
v
| NOTE |
8. Press the
button to begin the ripping
v
process. The Ripping Completion Bar popup
\ You can create a playlist with up to 99 tracks on Audio
appears.
CDs (CD-DA).
9. When ripping is complete, the “Ripping is
\ If you have created a playlist, Selection Play is replaced
completed” message appears. Press the
v
by Edit Playlist on the Tools menu.
button.
\ On the Selection Play screen, you can also choose Select
10. Press the RETURN button to go back to the
All, Deselect All, and Cancel.
Playback screen.
-
-
-
Use Select All to select all tracks. This cancels your
individual track selections. When you press the
RETURN button on your remote or select
button,
6
and then press the
button, all tracks will appear
v
on the Music Playback screen, and the product will
begin to play all tracks from Track 001.
Use Deselect All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to select
all the tracks, and then press the RETURN button
on your remote or select
button, and then press
6
the
button. If you do not use Select All or select
v
individual tracks, the Playlist will not change.
Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
|
38
English
| NOTE |
Playing Photo Contents
\ Depending on the disc or storage device, the Tools menu
You can play photo contents located on a DVD,
may differ. All options may not be displayed.
USB, mobile device or PC.
\ To enable the background music function, the photo file
must be in the same storage media as the music file.
However, the sound quality can be affected by the bitrate
of the MP3 file, the size of the photo, and the encoding
method.
Using the Tools Menu
During playback, press the TOOLS button.
Go to Photos
Select to go to the list of photos on the
\ You can't enlarge the subtitle and PG graphic in the full
List
current media.
screen mode.
Start Slide
Show
Select to start the slide show.
Using the Tools Menu when a file
is highlighted
Slide Show
Select to set a slide show's speed.
Speed
Slide Show
Effect
Select to set a slide show's special
When a file is highlighted, press the TOOLS
effects.
button.
Background
Select to listen to music while viewing
a slide show.
Select to access the sort options: Artist,
Music On
Genre, Monthly, Latest Date, etc. The
View
Background
Select to set the background music
sort options that appear depend on the
Music Setting
setting.
storage and media type.
Select to set the picture settings.
Appears in the View function screen.
Folder view
Title
Select to display the folders on the
- Dynamic : Choose to increase
storage device.
Sharpness.
- Standard : Choose for most viewing
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by title.
Appears on the View function screen.
Select Artist to sort and then display
all music tracks on a storage device by
artist.
Appears on the View function screen.
Select Album to sort and then display
all music tracks on a storage device by
album.
Appears on the View function screen.
Select Genre to sort and then display
all music tracks on a storage device by
genre.
applications.
- Movie : This is the best setting for
watching movies.
Picture Mode
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
Artist
| NOTE |
\ When you use the BD wise function,
Album
this menu will not appear.
Select to enlarge the current picture.
Zoom
(Enlarge up to 4 times)
Select to rotate the picture. (This will
rotate the picture either clockwise or
counter clockwise.)
Genre
Rotate
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the latest to earliest date.
Selection Play See pages 39~40.
Latest Date
Login/Out
See pages 39~40.
Shows the picture information.
Information
|
English
39
Media Play
Appears on the View function screen.
Select Send to upload selected files
to Picasa, Facebook, Cloud Storage, N
Drive, or Family Story.
Select to sort and then display all photo
or video files on a storage device from
the earliest to latest date.
Earliest Date
To use Send, you need to establish an
account with the on-line site, and then
log in using the Log In function.
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by the month created.
Monthly
1. Use the ▲▼◄► buttons to
select a file, and then press the
Selection Play lets you select specific
music, video, and photo files to play.
It works essentially the same for all
media. The example below is for
photos.
button.
v
2. Repeat for each track or file you
want to upload.
Send
| NOTE |
1. On the selection screen, use the
\ You can also move to Select All on
▲▼◄► buttons to select a
the right, and then press the
v
photo you want to view, and and
button to select all tracks or files.
then press the
button.
v
3. Select Send on the right side, and
A check mark appears to the left
then press the
button.
v
of the picture.
4. Use the ▲▼ buttons to select the
on line site you want to upload the
files or tracks to, and then press
2. Repeat Step 1 for each photo you
want to view.
3. To de-select a photo, highlight it,
the
button.
v
and then press the
button.
v
The Log In/Out function lets you log in
Login / Out
4. When done, use the ◄► buttons
to your online Samsung account.
Selection play
to select Play, and then press
the
button. A slide show
v
Select to create a playlist or add files
or tracks to a playlist.
containing the photos you selected
begins.
1. Use the ▲▼◄► buttons to
5. To pause the slide show, press the
highlight a track or file, and then
button once. To restart the
v
press the
button.
v
slide show, press the
button
v
2. Repeat for each track or file you
Add to Playlist
again.
want to add.
6. To stop the slide show, press the
3. Select Add to Playlist on the right,
RETURN button.
and then press the
button.
v
| NOTE |
4. On the screen that appears,
perform one of the following
actions:
\ After the slide show begins, you can
control the slide show by pressing
the TOOLS button and displaying
the Slide Show menu. See "Using
the Tools Menu" page 39.
|
40
English
• Select the Playlist to which you want
Select to go to the Playlist section of
the Main AllShare screen.
Go to Playlist
Encoding
to add the tracks or files and then
press
button.
v
Encoding - which changes by language
or by geographical area - modifies
how the player sorts, arranges, and
presents files or tracks, displays dates,
etc. Select Encoding to change the
encoding to match your language or
geographical area.
• Select Create New, and then press
the
button. On the keyboard
v
pop-up that appears, create a name
for the new playlist. Enter numbers
using the numbers on the remote.
Enter letters by using the ▲▼◄►
buttons to move the cursor, and
Add to Playlist
(continued)
Displays media file and content
then pressing the
button.
v
Information
| NOTE |
information.
When finished, move to DONE at
the bottom of the screen, and then
press the
button.
v
\ Depending on the disc or storage device, the Tools menu
Depending on the screen you are
viewing, select Delete to erase a file
from erasable media (such as a USB
device) or to delete a playlist.
may differ. All options may not be displayed.
Delete (Playlist)
Edit Playlist
Select Edit Playlist to remove files or
tracks from an existing playlist. The
storage device containing the playlist
must be inserted into or attached to
the player.
1. Use the ▲▼◄► buttons to
select a file, and then press the
button.
v
2. Repeat for each track or file you
want to remove.
| NOTE |
\ You can also move to Select All on
the right, and then press the
v
button to select all tracks or files.
3. Select Remove on the right side,
and then press the
button.
v
After you have sorted by Artist, Genre,
Album,Title, Latest Date, Earliest Date,
or Monthly, select a group that is the
result of the sort (for example, all
pictures taken in August), and then
select Play Current Group to play or
view the files in that group only.
Play Current
Group
|
English
41
Network Services
You can enjoy various network services such as
Smart Hub or BD-LIVE by connecting the player
to your network.
Smart Hub at a Glance
1
2
34
To use network services, you must first:
Search
1. Connect the player to the network.
(See page 16)
Samsung Apps
Your Video
Family Story
Fitness
Kids
2. Configure the network settings.
0
9
5
6
7
(See pages 24~26)
Contents
1
Contents
2
Contents
3
Contents
4
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
Using Smart Hub
llpaper
/
Tools
'
Return
8
Using Smart Hub, you can download movies,
videos, and music from the Internet, and access
various for pay or free-of-charge applications
and view them on your TV. Application content
includes news, sports, weather forecasts, stock
market quotes, maps, photos, and games.
Your Video : Provides recommendations for videos
1
based on your tastes.
Search : Provides an integrated search of your
2
3
video providers and connected AllShare devices.
For instructions that explain how to use Smart
Recommended : Displays recommended contents
Hub, follow these steps:
managed by Samsung.
Commercial : Displays the Smart Hub Guide, an
introduction to the player, and new application
introductions.
Family Story : Effortless way to access family
2. Click Support at the top of the page.
4
5
3. On the Support page, enter the model
number of your player into the Model Number
field, and then press the Enter button.
content.
4. On the page that appears, click Get
downloads on the left side under Downloads.
The Download Center appears.
• Provides access to family photos, messages, and
events, anytime and anywhere.
Fitness : Gateway to the Unified Self-Care Service.
5. On the Download Center page, click the
• Presents fitness videos from various content
partners with feedback on calories burned after
every workout.
Manuals tab.
6
7
6. On the Manuals tab, click the file icon to the
right of Smart Hub Users Manual. The manual
downloads.
Kids : Kids service gives kids an easy and safe way
to enjoy their favorite content.
| NOTE |
• Provides a wide variety of fun and safe content
\ The web location of the Smart Hub manual is subject to
for children.
change without notice.
Navigation Help : Displays the remote control
\ If the home page is updated or revised, the content
mentioned in the user manual may differ from the actual
menus.
buttons you can use to navigate in Smart Hub.
• RED (A) : To log in to Smart Hub.
8
• GREEN (B) : To display the background screen.
• Tools : To display the settings window.
• Return : To return to the previous menu.
|
42
English
Web Browser at a Glance
My Applications : Displays your personal gallery
of applications which you can add to, modify, and
delete.
Samsung Apps : Open Samsung Apps to download
various for pay or free-of-charge application
services.
9
0
1
Using the Web Browser
Google Search
I’m Feeling Lucky
You can access the internet using the Web
Browser application which is installed in the Smart
Hub screen by default.
b Control Panel c Switch to pointer
Scroll Up/Scroll Down / Tools ' Return
2
1. Select Smart Hub on the Home screen, and
then press the
button.
v
Control Panel : Displays the various Web Browser
2. Select the Web Browser application in Smart
functions.
Hub, and then press the
button.
v
•
•
•
: Moves to the previous page.
: Moves to the last page before going back.
| NOTE |
: Reloads the current page so that it is
refreshed on the screen.
\ When you run the Web Browser with the player connected
by HDMI to a BD Wise compatible TV - and BD Wise is on
- the browser is maximized to fill the screen and the TV's
resolution is set to the optimal resolution automatically.
•
•
•
•
•
: Moves to the Home screen of the Web
Browser.
: Allows you to zoom in or out of the screen at
various percentages.
\ The Web Browser is not compatible with Java
applications.
: Allows you to bookmark specific pages so
that you can move to them easily.
\ If you attempt to download a file, and the file can not be
saved, an error message will appear.
1
: Allows you to view the history of your visited
pages by date, name, or frequency.
\ The playback of Flash videos is not supported.
\ E-commerce, for purchasing proudcts online, is not
: Allows you to enter a
supported.
page address manually or select a page from the
visited page list to move to that page.
\ ActiveX is not supported.
•
•
•
•
: Allows you to switch easily between
multiple, currently open Web Browser windows.
: Allows you to search for information by
entering words.
: Lets you share the current site with your
family group by sending a message.
: Allows you to configure all settings for using
the Web Browser.
|
English
43
Network Services
Using Disc to Digital
Navigation Help : Displays the remote control
buttons you can use to navigate in Web Browser.
Disc to Digital lets you upload DVD movies
to your own personal, Internet Disc to Digital
repository and then stream them in HD format to
other Internet connected devices including smart
phones, tablet PCs, and Smart TVs.
• GREEN (B) : To display the Control Panel.
• YELLOW (C) : To switch the pointer.
2
•
( ) : Scroll Up/Scroll Down the page.
• Tools : To display Tools window.
• Return : To return to the previous menu.
To use Disc to Digital, you must first download
the Disc to Digital application. To download the
application, follow these steps.
bD-LIvE™
1. Make sure the player is connected to the
network. (see page 20.)
Once the player is connected to your network, you
can enjoy various movie-related service contents
available on BD-LIVE compliant discs.
2. On the Home screen, select SMART HUB,
and then press the
button.
v
3. Select Samsung Apps, and then press the
1. Attach a USB memory stick to the USB jack
on the front of the player, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
button.
v
4. In Samsung Apps, select and then download
one of the Disc to Digital applications. There
can be up to three.
5. Press the HOME button on the remote
2. Select Settings on the Home screen, and
control to come back to the Home screen.
then press the
button.
v
6. Select Settings > Network > Disc to Digital
App, and then select an application to be the
default application for Disc to Digital. (See
page 21)
3. Select Network, and then press the
v
button.
4. Select Bd Live Settings, and then press the
button.
v
5. Select Bd data management, and then
press the
button.
v
Disc to Digital App
6. Select Select device, and then press the
Select a default application to use for this service.
button.
v
Digital Copy
Locker
Digital Copy
Locker
7. Select USB, and then press the
button.
v
B
DigitAal Copy
Flixster App
Digital Copy
8. Insert a Blu-ray Disc that supports BD-LIVE.
Locker B
Locker A
Close
9. Select an item from the list of BD-LIVE service
'
Return
contents provided by the disc manufacturer.
| NOTE |
\ The way you use BD-LIVE and the provided contents may
Disc to Digital application you downloaded)
and create an account.
differ, depending on the disc manufacturer.
|
44
English
Registering a dVd Movie in disc to
digital
playing a Registered disc to digital
Movie
Before you can stream a DVD movie to other
Internet connected devices, you must register
the movie using your Disc to Digital software and
purchase the right to stream it to other devices.
1. On a PC or other Internet connected device,
access the Flixster website, and then access
your Flixster account. Enter your account PIN
number as necessary.
1. Insert the DVD movie you want to register
2. Find your movie, and then enter the Activation
with Disc to Digital.
Code.
2. On the Home screen, select disc to digital,
3. If you see a play icon, click the play icon.
and then press the
button.
v
The movie plays.
3. Disc to Digital verifies the disc. Once the
DVD's information is verified, the default
application for Disc to Digital opens (in this
example, Flixster).
Section Title Here: Some Title Here
XXXXXXXXXXXXXX
XXXXXX (2010)
AV Rating:
96%
Xxxxxxxx xxx Xxxxxxxxxxxx Xxxxxxxx xx
Xxx xx Xxxxxx Xxxxxxxx
Xxxxxxxx xxx Xxxxxxxx
Xxxxxxx xxx Xxxxxxxxxxxx
Length: XXX xxxxxx Rating: xxxxxx
Genre: Xxx xx Xxxxxx
Synopsis
Movie information
Rent & Own
Cast & Crew
Trailer & Clips
Rent in HD form $x.xx All Cast & Crew Bios 4 Clips
c
Follow
d
Share
'
Back
| NOTE |
\ You can also start the Disc to Digital function by pressing
the Disc2Digital button on the remote control.
| NOTE |
\ If you've downloaded one or more Disc to Digital
applications, you must set one of them as the default
application.
com" to create your account.
4. In the Flixster application, find your movie and
then click the Purchase button. The Activation
Code appears.
See "Disc to Digital App" on page 21.
\ Disc to Digital only works with commercial DVD-VIDEOs.
Blu-ray Discs, Audio-CD, and Data discs are not
supported.
Section Title Here: Some Title Here
\ Some commercial discs purchased outside of your region
or that do not meet required specifications may not be
supported by this function.
XXXXXXXXXXXXXX
XXXXXX (2010)
XXXX
Activate Your Account to Create A Digital Copy
To create a digital copy, you must first activate your account. Go to
Cancel
/
Open Menu
'
Back
5. Record the activation code. You now have
the right to stream your movie in HD quality
resolution to most other Internet connected
devices.
|
English
45
Appendix
Compliance and Compatibility Notice
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual, including the Disc
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA); BD-RE/-R, DVD-RW/-R; and CD-RW/-R.
• Discs other than the above cannot and/or is not intended to be played by this player. And some of the
above discs may not play due to one or more reasons provided below.
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to
all operating commands or operate all features of every disc. These and other disc compatibility and
player operation issues with new and existing format discs are possible because:
- Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs
because some features may be optional, additional features may have been added to the Blu-ray
Disc format after the production of this player, and certain available features may be subject to
delayed availability;
- not all new and existing disc format versions are supported by this player;
- new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
- some discs are produced in a manner that allows specific or limited operation and feature during
playback;
- some features may be optional, additional features may have been added after the production of this
player or certain available features may be subject to delayed availability;
- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
- some discs may not be played depending on their physical state or recording conditions;
- problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the
manufacture of discs;
- this player operates differently than a standard DVD player or other AV equipment; and/or
- for reasons noted throughout this user manual and for other reason(s) discovered and posted by
SAMSUNG customer care center.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer
care center.
You may also contact SAMSUNG customer care center for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the Precautions,
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this
user manual.
• For Blu-ray disc player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
|
46
English
Copy Protection
• Because AACS (Advanced Access Content System) is approved as content protection system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain
restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your time of
purchase as those restrictions may be adopted and/or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,
or this product, please contact SAMSUNG customer care center.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect
your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected Blu-ray Disc/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,
display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other
materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies of
some commercially-produced film and videos and their soundtracks. When a prohibited use of
an unauthorized copy is detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information
postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
This product incorporates proprietary technology under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well
as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services displayed through this device.
|
English
47
Appendix
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation
or warranty that any content or service will remain available for any period of time. Content and services
are transmitted by third parties by means of networks and transmission facilities over which Samsung
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any
responsibility or liability for any interruption or suspension of any content or service made available
through this device.
Samsung is neither responsible nor liable for customer service related to the content and services.
Any question or request for service relating to the content or services should be made directly to the
respective content and service providers.
License
• Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS,
Inc. Product includes software. © DTS, Inc. All Rights Reserved.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names
may be trademarks of their respective owners.
• Open Source License Notice
- In the case of using open source software, Open Source Licenses are available on the product
menu.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
|
48
English
• Rovi Flow-Down Licence Terms (Terms of Use)
- This application incorporates software and technology of Rovi Corporation ("Rovi"). The Rovi software
and technology (collectively, the "Rovi Technology") allows End Users to access music-related data
("Rovi Data") over the Internet and otherwise from proprietary Rovi databases (the "Rovi Databases")
located on Rovi servers (the "Rovi Servers") and to perform other functions. You may access and use
Rovi Data only by means of the intended End User functions of this application software.
- You agree that you will use the Rovi Data, the Rovi Technology, and the Rovi Servers for your own
personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Rovi
Data to any third party. You agree not to use or exploit Rovi Data, the Rovi Technology, the Rovi
Databases, or the Rovi Servers, except as expressly permitted herein.
- You agree that your non-exclusive licence to access the Rovi Databases and to use the Rovi Data,
the Rovi Technology, and the Rovi Servers will terminate if you violate these restrictions. If your
licence terminates, you agree to cease any and all use of the Rovi Data, the Rovi Technology, and the
Rovi Servers. Rovi reserves all rights in Rovi Data, the Rovi Technology, and Rovi Servers, including
all ownership rights. You agree that Rovi may enforce its rights under this Agreement against you
directly in its own name.
- Rovi reserves the right to delete data from the Rovi Databases or to change data categories for any
cause that Rovi deems sufficient. No warranty is made that the Rovi Technology or Rovi Servers are
error-free or that functioning of Rovi Technology or Rovi Servers will be uninterrupted. Rovi is not
obligated to provide you with any new enhanced or additional data types or categories that Rovi may
choose to provide in the future and is free to discontinue its online services at any time.
- The data you submit to use will not be personal data or personally identifiable data, but rather
only data respecting music albums and associated data that does not appear in the Rovi Lookup
Database. You certify that to the best of its knowledge the album to which the submitted data
corresponds is commercially available and that you End User are lawfully permitted to submit the
data.
- To the extent that you, the End User, provide any information or original works of authorship to be
added to Rovi Databases, you represent and warrant that you are the sole author of such work(s)
and further hereby assign to Rovi all rights of copyright therein, including the right to register the
copyright in such work(s) as part of the Rovi Database.
- THE ROVITECHNOLOGY AND EACH ITEM OF ROVI DATA ARE LICENSED TO YOU "AS IS." ROVI
MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE
ACCURACY OF ANY ROVI DATA ON THE ROVI SERVERS. ROVI DISCLAIMS ALL WARRANTIES
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT.
ROVI DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE
ROVI TECHNOLOGY OR ANY ROVI SERVER. IN NO CASE WILL ROVI BE LIABLE TO YOU OR
ANY THIRD PARTY FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY
LOST PROFITS OR LOST REVENUES RESULTING FROM YOUR USE OF ROVI DATA, THE ROVI
TECHNOLOGY OR OTHERWISE.
|
English
49
Appendix
Additional Information
Note
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the
button once. The movie
5
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the
button once.
5
The Blu-ray menu appears. Press the
menu.
button again, then select 3D Settings in the Blu-ray
5
• Depending on the content and the position of the picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option that is different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of picture).
BD Wise (Samsung Players only)
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
• If the player is connected to a device that does not support BD Wise, you can not use the BD
Wise function.
• For proper operation of BD Wise, set the BD Wise option of both the player and the TV to On.
Digital Output
Settings
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby digital,
DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• This Digital Output setup does not affect the HDMI audio output to your TV.
It affects the coaxial and HDMI audio output when your player is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
PCM Downsampling
• Even when PCM Downsampling is set to Off, some discs will only output downsampled audio
through the coaxial digital outputs.
• HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio even though you selected Bitstream (either
Reencoded or Unprocessed) in the setup menu.
- If your TV is not compatible with PCM sampling rates over 48kHz, the player may output
48kHz.
|
50
English
BD-LIVE Internet Connection
• What is a valid certificate?
When the player uses BD-LIVE to send the disc data and a request to the server to certify the
disc, the server uses the transmitted data to check if the disc is valid and sends the certificate
back to the player.
• The Internet connection may be restricted while you are using BD-LIVE contents.
BD Data Management
• In the external memory mode, disc playback may be stopped if you disconnect the USB device in
the middle of playback.
Settings
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster
read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on conditions.
Anynet+(HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
Selecting the Audio Language
• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the languages that are
encoded on the disc. This function or certain languages may not be available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby digital audio soundtrack in
English.
Selecting the Subtitle Language
Media Play
• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the
Disc Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same time.
• The total number of primary and secondary subtitles are displayed respectively.
• If you press the SUBTITLE button on the remote control, the subtitle bar appears.
Press the RETURN button to remove the subtitle bar.
|
English
51
Appendix
Resolution according to the contents type
Contents Type
E-contents/
Blu-ray Disc
Resolution of Blu-ray Disc
Max. Resolution of TV input
DVD
480i
Digital contents
Setup
BD Wise
Auto
1080@60F
Max. Resolution of TV input
Max. Resolution of TV input
1080p@60F
1080@60F
1080@60F
1080@60F
(Movie Frame : Off)
Movie Frame : Auto (24Fs)
1080@24F
1080i
720p
1080@24F
1080i
720p
480p
-
1080i
720p
480p
1080i
720p
480p
480p
| NOTE |
\ If the TV you connected to the player does not support Movie Frame or the resolution you selected, the message "If no
pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous resolution. Do you want to
change the resolution?" appears. If you select Yes, the TV's screen will go blank for 15 seconds, and then the resolution will
revert to the previous resolution automatically.
\ If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the
p
button
on the front of the player for more than 5 seconds. All settings are restored to the factory default. Run the Initial Settings
procedure again. Then, go to Settings > Display > Resolution in the Menu, and select the correct resolution for your TV.
\ When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format) only. Resetting
does not affect your network settings, so you should be able to skip Network Setup and Software Upgrade.
\ When the factory default settings are restored, all stored user BD data will be deleted.
\ The Blu-ray Disc must have the 24 frame feature for the player to use the Movie Frame (24Fs) mode.
|
52
English
digital Output Selection
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Bitstream
Setup
PCM
(Unprocessed)
HDMI supported
AV receiver or
Coaxial
HDMI
HDMI
HDMI Receiver
Connection
Coaxial
Coaxial
Receiver
Receiver
or Coaxial
Re-encoded
PCM
Up to 7.1ch PCM 2ch
PCM
PCM 2ch Re-encoded DTS
Dolby Digital *
Re-encoded
Dolby Digital
PCM 2ch
PCM 2ch
PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS
Dolby Digital
Dolby Digital *
Dolby Digital
Re-encoded
PCM 2ch
Dolby Digital Re-encoded DTS
Plus
Plus
Dolby Digital *
Audio Stream
on Blu-ray
Disc
Re-encoded
Dolby TrueHD PCM 2ch
PCM 2ch Dolby TrueHD Dolby Digital Re-encoded DTS
Dolby Digital *
Re-encoded
DTS
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS
DTS
DTS
Re-encoded DTS
Re-encoded DTS
Dolby Digital *
DTS-HD High
Resolution
Audio
DTS-HD High
Re-encoded
PCM 2ch Resolution
Audio
Dolby Digital *
DTS-HD
DTS-HD
Re-encoded
PCM 2ch
PCM 2ch
DTS
PCM 2ch
Re-encoded DTS
PCM 2ch
Master Audio
Master Audio
Dolby Digital *
PCM
Dolby Digital
DTS
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Dolby Digital
DTS
Audio Stream
on DVD
PCM 2ch Dolby Digital Dolby Digital Dolby Digital
PCM 2ch
DTS
DTS
DTS
Decodes main
feature audio
and BONUSVIEW
audio stream
together into
PCM audio and
add Navigation
Sound Effects,
then re-encodes
the PCM
Decodes main
feature audio and
BONUSVIEW audio
stream together
into PCM audio
and add Navigation
Sound Effects,
then re-encodes
the PCM audio
into Dolby digital
bitstream
Outputs only main feature
audio stream so that your
Decodes main feature
audio and BONUSVIEW AV receiver can decode the
Definition for
Blu-ray Disc
Any
audio stream together
into PCM audio and add
audio bitstream.
You will not hear
Navigation Sound Effects. BONUSVIEW audio and
Navigation Sound Effects.
audio into DTS
bitstream
* If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Blu-ray Disc.
|
English
53
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM
SOLUTION
No operation can be performed with the
• Check the batteries in the remote control. They may need replacing.
remote control.
• Operate the remote control at a distance of no more than 20 feet from the
player.
• Remove the batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to reset it.
Reinstall the batteries and try to operate the remote control again.
The disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
The disc Menu does not appear.
• Ensure that the disc has disc menus.
The prohibition message appears on the
screen.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD's software doesn't support the feature (e.g., angles).
• You've requested a title or chapter number or search time that is out of
range.
Play mode differs from the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
The screen ratio cannot be changed.
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blank.
• If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the
p
button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data will
be deleted.
Forgot password
• Press the
p
button (on front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD data will
be deleted.
|
54
English
PROBLEM
SOLUTION
If you experience other problems.
• Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
The picture is noisy or distorted
No HDMI output.
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
• Check the connection between the TV and the HDMI jack of the player.
• Check if your TV supports 480p, 720p, 1080i or 1080p HDMI input
resolution.
Abnormal HDMI output screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
AllShare function
I can see folders shared through AllShare,
• AllShare only shows Video, Photo, and Music files. Other types of files are
but I cannot see the files.
not displayed.
The video plays intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is not
overloaded.
• The wireless connection between the DLNA compatible device and the
player is unstable.
Check the connection.
The AllShare connection between the player • IP addresses within the same subnetwork should be unique.
and the PC is unstable.
If they are not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
|
English
55
Appendix
PROBLEM
BD-LIVE
SOLUTION
I cannot connect to the BD-LIVE server.
• Test whether the network connection is successful using the Network
Status function. (See page 20)
• Check whether a USB memory device is connected to the player.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 21)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the player to the
latest firmware.
When using the BD-LIVE service, an error
occurs.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 21)
| NOTE |
\ When the factory default settings are restored, all stored user BD data will be deleted.
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the product.
2. You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or begin any
work on your player.
We recommend you read this manually thoroughly, search for a solution on line at www.samsung.com, or
contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your player.
|
56
English
Specifications
Power Requirements
AC 120V, 60Hz
17W
Power Consumption
Weight
2.7 Ibs
General
Dimensions
14.2 (W) X 7.7 (D) X 1.5 (H) inches
+41°F to +95°F
10 % to 75 %
USB 2.0
Operating Temperature Range
Operating Humidity Range
Type A
USB
DC output
5V 500mA Max.
2D : 1080p, 1080i, 720p, 480p
3D : 1080p, 720p
Video
Audio
HDMI
PCM, Bitstream
Coaxial
Audio Output
Digital Audio Output
Ethernet
100BASE - TX Terminal
Built-in
Wireless LAN
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Network
Security
WPS(PBC)
Supported
• Network speeds equal to or below 10Mbps are not supported.
• Design and specifications are subject to change without prior notice.
• Weight and dimensions are approximate.
• Dispose unwanted electronics through an approved recycler.
278 - 0799.
|
English
57
LIMITEd WARRANTY TO ORIGINAL pURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the
original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for
a limited warranty period of:
One (1) Year parts and Labor*
(*90 days parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the
United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service
procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill
of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center.
Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned
parts or products if found to be defective during the limited warranty period specified above. All replaced parts and
products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products
assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG's obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name
are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided,
are on an "AS IS" basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to
the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the
following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses
for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents,
abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts,
supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by
SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and
surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental
instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems
and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not
warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO
WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY
PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE
THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST
SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND
CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND
LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND
THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG
NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park,
NJ 07660-2112
1-800-SAMSUNG
IN THE US
(726-7864)
AK68-02228A-00
|