CID 2901/2902 Mini Caller ID
OWNER’S MANUAL — Please read before using this equipment.
TABLE OF CONTENTS
Features .............................................................................................................................................................................................................2
FCC Information ............................................................................................................................................................................................... 2
The FCC Wants You to Know ........................................................................................................................................................................ 2
Lightning ........................................................................................................................................................................................................ 3
Installing Batteries ........................................................................................................................................................................................... 3
Replacing the Batteries .................................................................................................................................................................................. 3
Connecting the System ................................................................................................................................................................................... 3
Connecting to a Single-Line Phone ............................................................................................................................................................... 3
Connecting to a Two-Line Phone ................................................................................................................................................................... 3
Connecting to an Answering Machine ........................................................................................................................................................... 3
Mounting the System ....................................................................................................................................................................................... 4
Attaching the Mounting Bracket ..................................................................................................................................................................... 4
Mounting on Wall ........................................................................................................................................................................................... 4
Adjust the Display Contrast ............................................................................................................................................................................. 4
Choosing a Language ...................................................................................................................................................................................... 4
Setting the Time ............................................................................................................................................................................................... 4
Receiving and Storing Calls ............................................................................................................................................................................ 4
Reviewing Call Records ................................................................................................................................................................................... 4
Displayed Call Information .............................................................................................................................................................................. 4
Deleting Calls .................................................................................................................................................................................................... 5
Deleting a Single Call ..................................................................................................................................................................................... 5
Deleting All Calls ............................................................................................................................................................................................ 5
VIP Call List ....................................................................................................................................................................................................... 5
Storing VIP Records ...................................................................................................................................................................................... 5
© 2000 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
2. Follow Steps 1-4 of “Installing Batteries.”
3. Reconnect the modular line cords.
The FCC Wants You to Know
In the unlikely event that your system causes problems on the phone
line, the telephone company can temporarily disconnect your ser-
vice. If this happens, the telephone company attempts to notify you
as soon as possible and advise you of your right to file a complaint
with the FCC.
CONNECTING THE SYSTEM
Your system connects to any modular phone jack and phone. You
can also connect it to an answering machine. Your system is de-
signed to be connected to the telephone network using a compatible
modular jack that is compliant with Part 68 of FCC Rules.
Also, the telephone company can make changes to its lines, equip-
ment, operation, or procedures that could affect the operation of the
system. The telephone company notifies you of these changes in
advance, so you can take the necessary steps to prevent interrup-
tion of your telephone service.
The USOC number of the jack to be installed is RJ11C (for both tele-
phone line jacks).
Lightning
Connecting to a Single-Line Phone
Your system has built-in protection circuits to reduce the risk of dam-
age from surges in phone line or power line current. These protec-
tion circuits meet or exceed FCC requirements. However, lightning
striking the phone line can damage your system.
1. Disconnect the telephone line cord from the phone and plug it
into the system’s TO LINE jack.
2. Plug one end of the supplied line cord into the system’s TO
PHONE jack.
Lightning damage is not common. However, if you live in an area
that has severe electrical storms, we suggest you unplug your sys-
tem when storms approach to reduce the possibility of damage.
3. Plug the other end of the cord into the phone’s jack.
Connecting to a Two-Line Phone
INSTALLING BATTERIES
To record information about calls received on a two-line phone, you
can connect two systems using a triplex adapter (not supplied),
available at your local RadioShack store. Each system only records
information about calls received on the line to which it is connected.
Your CID requires four AAA batteries (not supplied) for power and to
protect its memory in the event of a power failure. For the best per-
formance and longest life, we recommend RadioShack alkaline bat-
teries.
L1+2
L2
L1
Cautions:
Systems
• Use only fresh batteries of the required size and recommended
type.
• Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable batteries
of different capacities.
Triplex Adapter
• When you replace the batteries, do not press any buttons on the
system until you have installed fresh batteries. Doing so could
erase all stored information.
Follow these steps to connect two systems to a two-line phone.
1. Disconnect the telephone line cord from the modular phone jack
on the wall and plug it into L1 + L2 on the triplex adapter.
• When replacing the batteries, have fresh ones on hand before
you begin. If you do not install the new batteries within about 2
minutes after removing the old ones, you will lose all the infor-
mation stored in the system.
2. Plug the triplex adapter into the modular phone jack.
3. Plug one end of the supplied line cord into the TO LINE jack on
one of the systems.
Follow these steps to install batteries.
4. Plug the other end of the cord into either L1 or L2 on the triplex
adapter.
1. Use a Phillips screwdriver to remove the screw in the battery
compartment cover.
5. Repeat Steps 3 and 4 to connect another system to the other
jack (L1 or L2) on the triplex adapter.
2. Press and slide the battery compartment cover in the direction
of the arrow.
Connecting to an Answering Machine
3. Put four fresh AAA batteries into the compartment as indicated
by the polarity symbols (+ and –) marked inside.
1. Plug one end of the supplied telephone line cord into the modu-
lar wall jack. Then plug the other end into the system’s TO LINE
jack.
4. Close the cover and secure it with the screw.
Warning: Dispose of dead batteries promptly and properly. Do not
bury or burn them.
2. Plug one end of another modular cord (not supplied) into the
system’s TO PHONE jack. Plug the cord’s other end into the
answering machine’s line jack.
Replacing the Batteries
When BATTappears or the display dims, replace the batteries.
1. Unplug both modular line cords from the back of the system,
then wait a few seconds.
3
3. Plug a third telephone line cord into the answering machine’s
phone jack and the phone’s modular jack.
SETTING THE TIME
The time and date are set with your first incoming Caller ID and up-
dated with every new call. To toggle between 12- or 24-hour time
formats, repeatedly press DELETE while the system is not in use.
Modular
Wall
Jack
RECEIVING AND STORING CALLS
To Phone
System
Answering Machine
Caller ID is a service provided by your telephone company. When
you subscribe to this service, the telephone company sends the call-
er’s telephone number (and name, if available) and the call’s date
and time between the first and second rings. The system receives
and displays this information for each call and updates the display
with the current date and time. Your system saves up to 79 call
records, then replaces the oldest call record with each new one. Re-
peat calls are stored separately, instead of all on the same record.
4. Set your answering machine to answer after two or more rings.
This gives the system time to record the call information that the
phone company sends between the first and second rings.
MOUNTING THE SYSTEM
You can set the system flat on a desk, shelf, or table or use the sup-
plied mounting bracket to set the system at an angle. You can also
use the bracket to mount the system to a wall.
During an incoming call, the red new call indicator flashes quickly
while the phone is ringing, then the number of new and total calls ap-
pear. The indicator flashes slowly until all calls are reviewed.
Attaching the Mounting Bracket
REVIEWING CALL RECORDS
1. Align the keyhole slots on the bottom of the system with the
hooks on the mounting bracket.
Each time you receive a call, the system saves a call record in mem-
ory that you can see while you are on the phone, or review later.
Each call record includes the time and date of the call, the call num-
ber (order in which the call is received), the caller’s telephone num-
ber, and the caller’s name (if available).
2. Gently push the bracket up into the system to secure it.
To remove the bracket from the system, press up from the bottom of
the system until the bracket snaps off.
To scroll through the call records, repeatedly press (or hold down)
either REVIEW key.
Mounting on Wall
To mount the system on the wall, you need two screws (not sup-
plied) with heads larger than the keyhole slots on the back of the
mounting bracket.
Notes:
• If no call information is stored, -NOCALL-appears when you
press either REVIEW key.
1. Drill two holes 17/16 inches (37 mm) apart
1
/8
at the mounting location. Thread a screw
into each hole, letting the heads extend
about 1/8 inch (3mm) from the mounting
surface.
inch
• If you do not press a button within about 10 seconds, the sys-
tem automatically returns to the time and date display.
7
1 /16
inches
• After you review all calls, -END OF LIST- appears. Press
either REVIEW key to view again.
1
/8
2. Attach the mounting bracket to the system
(see “Attaching the Mounting Bracket”).
inch
DISPLAYED CALL INFORMATION
3. Connect the system as described in “Connecting the System”.
Display (English, French,
Description
4. Align the keyhole slots on the mounting bracket with the screws
and slide the system down until it is secure.
Spanish)
Appears with a number if you have
received a call from the same phone
number more than once (up to 9 times).
REPT
ADJUST THE DISPLAY CONTRAST
LONGDISTANCE
LONGUEDISTANCE
LARGADISTANCIA
Appears along with LDC(long distance
call) if your phone company sends infor-
mation indicating that the incoming call
is long distance.
To lighten or darken the display, hold down DELETE and REVIEW:
until CONTRASTADJUSTappears. Then repeatedly press REVIEW
; to select the desired contrast setting. Press the REVIEW :#key to
set the contrast.
UNKNOWNNAME
-NOMINCONNU-
NOMDESCONOCIDO
Appears when the incoming call is from
an area that does not send Caller ID
name information.
CHOOSING A LANGUAGE
UNKNOWNNUMBER
NUMEROINCONNU
NUMDESCONOCIDO
Appears when the incoming call is from
an area that does not send Caller ID
number information.
Your system is programmed to display messages in English, but you
can change it to display in French or Spanish.
1. Hold down REVIEW :#and ; for about 3 seconds until the cur-
rent language (ENGLISH, FRANCAIS for French, or
ESPANOLfor Spanish) appears.
UNKNOWNCALLER
APPELERINCONNU
DESCONOCIDO
Appears when the incoming call is from
an area that does not send any Caller ID
information.
-BLOCKEDNAME-
-NOMBLOQUE-
NOMBREPRIVADO
Appears when the caller has blocked the
Caller ID name information from being
sent.
2. Repeatedly press REVIEW; until the desired language
appears.
BLOCKEDNUMBER
-NUMEROBLOQUE-
NUMEROPRIVADO
Appears when the caller has blocked the
Caller ID number information from being
sent.
3. Press REVIEW : to set the new language.
Note: If a button is not pressed within 10 seconds, the time appears.
4
Storing VIP Records
Display (English, French,
Spanish)
Description
1. Repeatedly press either REVIEW key until you see the call
record you want to store as a VIP call.
BLOCKEDCALL
APPELBLOQUE
LLAMADAPRIVADO
Appears when the caller has blocked
any Caller ID information from being
sent.
2. Hold down VIP until -RECORDSTORED-appears. The system
stores the call record as a VIP call record.
-SERVICEERROR-
ERREURDELIGNE
ERRORENLINEA
Appears when the Caller ID information
was garbled. (It is normal for this to hap-
pen.)
Notes:
-NODATASENT-
PASDEDONNEES
-NOENVIADO-
Appears when the call information was
not sent by the phone company.
•
•
If the system’s memory is full (20 VIP call records are already
stored), -VIP MEMO FULL- appears when you press VIP.
To store another VIP call record, you must first delete an
existing one.
#NEW
Indicates a new call that has not been
reviewed.
If you save a call as VIP, the total numbers of call records will
accordingly decrease by 1.
NEWTOTAL
NOUVTOT.
NUEVOTOTAL
The number of new calls that have not
been reviewed and the total number of
incoming calls.
To review VIP call records, press VIP, then repeatedly press either
REVIEW key.
DELETE ALL
EFFACER TOUT?
BORRAR TODO?
Appears when you delete all calls.
To delete a VIP call record, press VIP, select the call record you want
Appears when no calls are stored.
to delete, then press DELETE.
NO CALL
PAS D APPEL
NO LLAMADA
To delete all entries from the VIP call list, press VIP, then hold down
DELETE until DELETEALL?appears. Press DELETE to confirm.
Appears when you have successfully
stored a record.
RECORD STORED
MEMORISE
MEMORIZADO
Note: To cancel deletion, do not press a button. After about 10 sec-
onds, DELETEALL?disappears.
Appears when the VIP memory is full if
you press VIP.
VIP MEMO FULL
VIP PLEIN
VIP LLENO
Appears when you have reached the
end of the list of messages.
END OF LIST
FIN DE LISTE
FIN DE LISTA
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material
and workmanship under normal use for one (1) year from the date of purchase from
RadioShack company-owned stores and authorized RadioShack franchisees and
dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS
WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CON-
TAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR
ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DI-
RECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT
LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF
TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
DELETING CALLS
Deleting a Single Call
1. Repeatedly press (or hold down) either REVIEW key until you
see the call record you want to delete.
2. Press DELETE. The system deletes that record and automati-
cally renumbers the remaining call records. After 10 seconds,
the time and date reappears.
Some states do not allow limitations on how long an implied warranty lasts or the ex-
clusion or limitation of incidental or consequential damages, so the above limitations
or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the
RadioShack sales receipt as proof of purchase date to any RadioShack store.
RadioShack will, at its option, unless otherwise provided by law: (a) correct the de-
fect by product repair without charge for parts and labor; (b) replace the product with
one of the same or similar design; or (c) refund the purchase price. All replaced parts
and products, and products on which a refund is made, become the property of
RadioShack. New or reconditioned parts and products may be used in the perfor-
mance of warranty service. Repaired or replaced parts and products are warranted
for the remainder of the original warranty period. You will be charged for repair or re-
placement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts
of God, abuse, accident, misuse, improper or abnormal usage, failure to follow in-
structions, improper installation or maintenance, alteration, lightning or other inci-
dence of excess voltage or current; (b) any repairs other than those provided by a
RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of
product removal, installation, set-up service adjustment or reinstallation.
Deleting All Calls
1. While the system displays the time and date, press either
REVIEW key.
2. Hold down DELETE until DELETEALL?appears.
3. While DELETE ALL? appears, press DELETE again. -NO
CALL-appears.
Note: To cancel deletion, do not press any button. After about
10 seconds, DELETEALL?disappears.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
VIP CALL LIST
Your system lets you save up to 20 call records in its VIP call list so
they will not be deleted if you delete all calls from the system’s mem-
ory. This lets you save a list of important callers.
We Service What We Sell
12/99
When you receive a VIP call, the red new call indicator turns on
steadily until you pick up the phone or the caller hangs up.
43-2901/2902
12A00
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
|