RCA CC432 User Manual

CC4 3 2

USER‘S

GUIDE

C A M C O R D E R

Assistance

We want to make sure you enjoy your new camcorder. If you have any

questions, call:

Customer Service..................................... 800-336-1900 (Page 59)

Accessories......................................... 800-338-0376 (Pages 46-53)

Table of Contents

Safety Information................................i

Product Registration.............................i

Contents.............................................1-2

Powering the Camcorder

• Using the Adapter/Charger ...............10

• Using the Rechargeable Battery

• Charging.........................................11

• Attaching and Removing................12

• Care and Storage ............................13

• Safety Precautions..........................13

• Battery Level Indicator...................14

• Using the Optional Thomson

First-Time Operation

• Assistance............................................3

• Unpack Camcorder and

Accessories ......................................3

• Attach the Adapter/Charger ................4

• Remove Lens Cap and Attach

to Handstrap.....................................5

• Turn on the Camcorder .......................5

• Insert a Cassette ..................................6

• Position Viewfinder and

Adjust Eyepiece Focus Control .......6

• Start and Stop Recording ....................7

• Play Back What You Have

Car Cord Adapter.......................15

Video Cassettes

• Erase Protection..............................16

• Recording and Playback Times......16

• Inserting and Removing

Cassettes.....................................17

Cassette Care and Storage................17

Traveling Tips ....................................18

Recorded ..........................................7

• Review the Camcorder’s

Cassette Tips.......................................18

Operating Controls .......................8-9

Table of Contents

Recording Features

• Playback Features

• Quick Review....................................19

• Tape Positioning ...............................19

• Microphone .......................................19

• AI (Artificial Intelligence) ................19

• Program AE (Auto Exposure)...........20

• Auto Focus ........................................20

• Macro Focus......................................20

• Electronic Indexing...........................21

• Time Remaining Display ..................21

• Viewfinder ...................................22-23

• Displays in Viewfinder................24-25

• Date and Time Display

• Stop-Action Pause.....................36-37

• Picture Search ...........................36-37

• Tracking .........................................37

• Playback on TV (or VCR) with

AUDIO/VIDEO IN Jacks.......38-39

• Playback on TV without

Audio and Video Inputs.........40-41

Color Enhancement Light............42-43

Attaching the Shoulder Strap ...........44

Information to User ...........................45

Specifications......................................46

• Set the Date and Time ....................26

• Record the Date and Time

(or Date) on Your Tape .............27

• Charging the Clock Cell.................27

• Tape Counter with Memory Stop..28-29

• Zooming............................................30

Optional Accessories.....................46-53

• Accessory Order Form.................51-53

• ProEdit Features

Care and Maintenance.................54-55

Trouble Checks.............................56-58

Limited Warranty..............................59

Index (Alphabetical).....................60-61

• Edit Search .....................................31

• Titler..........................................32-34

Recording Tips ...................................35

Playback

• Viewfinder Playback.........................36

First-Time Operation

This section describes only the basic steps necessary to set up your camcorder to

record. Refer to the other sections for detailed operation and feature options.

Assistance

The toll-free numbers are available to help you with any problem you may encounter.

Customer Service . . . . . . . . . . . . . . . .800-336-1900

Accessories . . . . . . . . . . . . . . . . . . . .800-338-0376

1. Unpack the camcorder and accessories.

• Save the box and packing materials in case you ever need to store or ship

your camcorder.

• The items shown below are packed with your camcorder. If any of them are

missing or appear damaged, contact your dealer immediately.

WARNING: LEAD-

ACID BATTERY.

MUST BE DISPOSED

OF PROPERLY.

Rechargeable 10-Volt Battery

Stock No. EP096FS

Camcorder

Model CC432

Shoulder Strap

Stock No. 227327

AC Adapter/Charger: Stock No. 232595

DC Cable: Stock No. 233328

Caution: Do not use this adapter/charger for any purpose other than charging the

EP096FL or EP096FS battery pack or supplying power to the camcorder.

First-Time Operation

Adapter/Charger

POWER

CHARGE

DC OUTPUT

Jack

Adapter/Charger’s

DC Cable

DC IN 9.6V Jack on

Back of Camcorder

adapter/charger.

2. Attach the adapter/charger.

• Attach the other end of the cable to

the DC IN 9.6V jack on the

camcorder.

Since the battery must be charged

before it can be used the first time,

attach the adapter/charger to the

camcorder.

• Plug the adapter/charger’s plug into

an operating outlet.

• Attach one end of the

• Details are on page 10.

adapter/charger’s DC cable to the

DC OUTPUT jack on the

First-Time Operation

CAMERA/OFF/VCR Switch

Handstrap

Lens Cap

• Press and hold the small button on

CAMERA/OFF/VCR while

sliding it in CAMERA. The

3. Remove the lens cap and attach

it to the handstrap.

electronic viewfinder will come on.

4. Turn on the camcorder.

The position of the

CAMERA/OFF/VCR switch tells the

camcorder whether you want to record

(CAMERA), play back tapes (VCR), or

turn off the power (OFF).

First-Time Operation

Safety Tab

Tape Window

REC (Record)

/PAUSE 7

Button

Lens Cap on

Handstrap

Cassette Door

Press Here to Close

6. Position viewfinder and adjust

eyepiece focus control.

• Grasp the viewfinder and rotate it

horizontally.

5. Insert a cassette.

• Press STOP/EJECT to open the

cassette compartment.

• Insert the cassette with the safety tab

facing up and the tape windows

facing out.

• Pull the viewfinder out from the

camcorder and rotate the eyepiece

into a comfortable viewing position.

• Press the cassette down gently until

it locks into place, and close the

cassette compartment door.

Caution: Pulling on the eyepiece may

cause damage to the eyepiece or

camcorder.

• Details are on page 17.

• If the image in the viewfinder is

blurry, adjust the eyepiece focus

control for your vision. Details are

on page 22.

First-Time Operation

CAMERA/OFF/VCR Switch

STOP/EJECT

PLAY

REW(Rewind)/

REVIEW

REC (Record)

/PAUSE

Eyepiece

Focus

Control

Eyepiece

Electronic

Viewfinder

(Grasp Here

to Move)

8. Play back what you have

recorded.

• Press REC/PAUSE to stop recording.

7. Start and stop recording.

Start and stop recording by pressing

and releasing REC/PAUSE. REC

appears in the viewfinder. You do not

have to hold the button to record.

• Press and hold the small button on

CAMERA/OFF/VCR while sliding

it to VCR.

Notes: If you do not record within five

minutes, the camcorder will automatically

shut off to prevent excessive tape wear.

Press REC/PAUSE to turn on the

camcorder.

• Press REW(rewind)/REVIEW to

rewind the tape.

• Press PLAY to play back the tape in

the viewfinder.

Any material recorded on the tape will

automatically be erased if you record

over it.

• Press STOP/EJECT when you are

finished playing back the tape.

• Details on viewfinder playback are

on page 36.

First-Time Operation

9. Review the camcorder’s operating controls.

REW (Rewind/Review) Button

Also Title Select – Button

DISPLAY Button

RESET Button

PLAY Button

DATE/TIME Button

F.FWD (Fast Forward) Button

Also Title Select + Button

TITLER Button

STOP/EJECT Button

Also EDIT•ADV Button

CAMERA•OFF•VCR Switch

Viewfinder

Microphone

Light

Eyepiece

Focus

Control

BRIGHT Control

(Located Under Microphone)

Lens

Hood

LIGHT AUTO/

OFF/ON Switch

VIDEO, AUDIO, and RF DC OUT

Jacks (Located Behind Small Cover)

First-Time Operation

9. Review the camcorder’s operating controls.

Shoulder Strap

Attachment

Ring

BATTERY

EJECT Lever

REC (Record)

/PAUSE Button

Hand Strap with

Lens Cap Holder

Power Zoom Buttons

(W and T) also

Cassette Door

DC IN 9.6V Jack

TRACKING Buttons

Powering the Camcorder

Caution: Do not attempt to use a “power converter” to use your AC adapter/charger

on a power source other than 120 volts, 50/60 Hz, or the adapter/charger and

camcorder may be damaged. If you wish to operate the AC adapter/charger on a

power source other than 120 volts, 50/60 Hz, use only a transformer-type power

converter. Do not use “solid-state” or “switching-type” power converters. They

will damage your AC adapter/charger. An optional CPS014 shown on page 47 is

designed for use on 100-240 volts, 50/60 Hz.

Using the Adapter/Charger to Power Your Camcorder

Plug in AC Outlet

(120V, 50/60Hz)

Adapter/Charger

POWER

CHARGE

POWER

Indicator

OUTPUT

Jack

Adapter/Charger’s

DC Cable

DC IN 9.6V Jack

When using the adapter/charger to power

the camcorder, the battery level indicator

may display . This indicator is used

for battery operation and has no meaning

when using the adapter/charger to power

the camcorder.

1. Connect one end of the adapter/

charger’s cable to the adapter/

charger’s DC OUTPUT jack and the

other end to the DC IN 9.6V jack on

the back of the camcorder.

2. Plug the adapter/charger into the

nearest AC outlet (120V, 50/60 Hz).

To Remove the Adapter/Charger

1. Remove the adapter/charger’s plug

from the AC outlet.

3. The POWER indicator on the

adapter/charger will light when it is

properly connected.

2. Remove the adapter/charger’s DC

cable from the DC IN 9.6V jack on the

camcorder.

Notes: The adapter/charger cannot charge

the battery and operate the camcorder at the

same time. If you connect both, the

adapter/charger will power the camcorder.

Remove the adapter/charger’s cable from

the DC OUTPUT jack to charge the

battery.

Caution: Do not use this adapter/charger

for any purpose other than charging the

EP096FS or EP096FL battery pack or

supplying power to the camcorder.

Powering the Camcorder

Using the Battery to Power Your Camcorder

Charging the Battery

The battery must be charged before it can be used the first time. Charging will take

approximately two hours depending on the condition of the battery. When fully

charged, the battery should supply approximately 60 minutes of operating time

(depending on how much you use zoom and pause). To extend the battery’s operation

time, turn off the camcorder’s power when not in use.

Plug in AC Outlet

(120 V, 50/60 Hz)

Rechargeable

Battery

Hold Battery

Flush and

Slide Down

WARNING: LEAD-

ACID BATTERY.

MUST BE DISPOSED

OF PROPERLY.

Align Arrows

Adapter/Charger

Caution: When a

battery is attached to

the adapter/charger,

do not turn them

upside down. The

battery may fall off

and be damaged or

cause injury.

CHARGE

Indicator

1. Attach the battery to the adapter/

charger as shown. Align the reference

arrow on the battery with the arrow on

the adapter/charger. Hold the battery

flush against the adapter/charger and

slide it in the direction of the arrow.

3. The CHARGE indicator will light

while the battery is being charged.

When the indicator turns off, the

battery is fully charged.

4. Remove the battery from the

adapter/charger by sliding the battery

up and off.

Note: You cannot charge the battery and

operate the camcorder from the adapter/

charger at the same time. Remove the

adapter/charger’s DC cable from the

camcorder to charge the battery.

5. Attach the charged battery to the

camcorder as shown on the next page.

2. Plug the adapter/charger into the

nearest AC outlet (120 V, 50/60 Hz).

Powering the Camcorder

Using the Battery to Power Your Camcorder

CAMERA/OFF/VCR Switch

BATTERY EJECT Lever

Rechargeable

Battery

Hold Battery

Flush and

Slide Down

Align Arrows

Remove the Battery

Attach Charged Battery

1. Slide CAMERA/OFF/VCR to OFF.

1. Align reference arrow on battery with

arrow on camcorder. Hold battery

flush against camcorder while sliding

it down in the direction of the arrow as

shown.

2. Press and hold BATTERY EJECT

while sliding battery up and off the

camcorder.

2. Press and hold small button on

CAMERA/OFF/VCR while placing it

in CAMERA.

ATTENTION: LEAD-ACID BATTERY MUST BE DISPOSED

OF PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED

USES A RECHARGEABLE BATTERY. AT THE END OF ITS

USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT

MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE

MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL

SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR

RECYCLING OPTIONS OR PROPER DISPOSAL.

Powering the Camcorder

Using the Battery to Power Your Camcorder

Battery Care

damaged if operated at temperatures

• Your battery will provide better service

and longer performance if you charge it

before and after use, and store it at

normal room temperature.

above 122ºF (50ºC). Operation time

will decrease at extremely low

temperatures.

• After repeated chargings and use, the

operation time will gradually decrease.

When operation time becomes too short

to be useful, it is time to replace the

battery.

• The battery should be charged at a

temperature of 32ºF-95ºF (0ºC-35ºC) to

prevent damage.

• Do not operate the battery at

temperatures below 14ºF (-10ºC) or

above 95ºF (35ºC). The battery may be

Battery Storage

• Store the battery at normal room

temperature.

• A battery stored for a long period may

not supply power for the specified time.

Additional rechargings may help

• Lead acid batteries discharge if not

used. Recharge the battery at least once

every six months or you may not be

able to recharge it.

restore the battery’s operation time.

Battery Safety Precautions

Batteries being recharged that have not

been used for an extended period may

continue to charge after the normal

time. Do not charge a battery for more

than 24 hours.

Allow battery to cool down before

attaching it to adapter/charger. The

CHARGE indicator will not light and

the battery will not charge if you attach

a hot battery.

If both indicators on the adapter/

charger start flashing, remove the

battery, and reattach it. If after several

attempts — the indicators continue to

flash — your battery cannot take a

charge and must be replaced.

Do not attempt to disassemble or

modify the battery. There are no user-

serviceable parts inside.

Use the battery only with specified AC

adapter/chargers and camcorders.

If leakage from a damaged battery

contacts your skin or clothing, wash it

off immediately with running water.

Throwing the battery into a fire or

exposing the battery to excessive heat –

over 149º F (65º C) could be hazardous.

Do not short the battery’s terminals.

Powering the Camcorder

Check Battery Power (Battery Level Indicator)

Battery Level Indicator

Display in Viewfinder

When DISPLAY is pressed, the battery

level indicator ( ) appears in the

• When the battery reaches the empty

level, will start flashing.

camcorder’s viewfinder to show how

much battery power is left in the

rechargeable battery.

Recharge the battery or attach the

adapter/charger before continuing to

use the camcorder.

Notes: The battery level indicator has no

meaning when you power the camcorder with

the adapter/charger or optional car cord.

This indicator is not recorded on the tape.

• When the battery is fully charged, the

display shows

When a rechargeable battery is used to power

• After a while, only

appears.

the camcorder,

flashes even if

DISPLAY is not pressed to warn you that the

battery power level is low.

Caution: When the battery reaches its empty level during use, the camcorder will

turn off. However, the battery should have enough reserve power to eject the cassette

when you press STOP/EJECT.

If the camcorder does not eject the cassette when you press STOP/EJECT, do not

force the cassette door open. This will damage your camcorder.

Before attempting to eject the cassette, power your camcorder with the

adapter/charger or recharge the battery.

Powering the Camcorder

Using the Optional Thomson Car Cord Adapter

To power your camcorder from the cigarette lighter socket of a car, truck, or RV, you

need the optional car cord adapter DCC096 shown on page 47.

The DCC096 car cord is especially designed to convert power from a 12-volt battery to

the 9.6-volt input jack on the camcorder.

Caution: The DCC096 car cord is designed to be used only with vehicles having

12-volt negative ground electrical systems.

Warning: To avoid possible damage to your camcorder, use only the DCC096.

It has positive tip polarity and is capable of converting 12-volts to 9.6 volts.

Cigarette Lighter Socket

Optional Car Cord

DC IN 9.6V Jack

Adapter (DCC096)

Notes: The vehicle does not have to be turned

on for the camcorder to operate from the DC

car cord.

1. Remove the adapter/charger’s DC

cable or battery from the camcorder, if

either is attached.

When using the car cord to power the

camcorder, the battery level indicator may

2. Connect the small plug on the car cord

to the DC IN 9.6V jack located on the

back of the camcorder.

display

. This indicator is used for

battery operation and has no meaning when

using the car cord to power the camcorder.

3. Insert the other end of the car cord into

the vehicle’s cigarette lighter socket.

4. Place the camcorder’s

CAMERA/OFF/VCR switch in

CAMERA. If the car cord is connected

properly, the electronic viewfinder will

come on.

Video Cassettes

We recommend that our cassettes be used with your camcorder. Use of poor quality

tapes or tapes that have been damaged or mishandled can contaminate the video heads,

resulting in a snowy picture or no picture at all during playback. Because there is no

control over the type of tape purchased or rented by consumers, head cleaning is not

covered under warranty. It is considered normal maintenance.

If a snowy picture or no-picture condition persists, consider the use of a dry chemical

non-abrasive head-cleaning tape. Be sure to follow the directions with the head-

cleaning kit carefully. Improper use of a head cleaner may damage your camcorder.

Erase Protection — Safety Tab

You can use your video cassettes over and over again. To erase a previous recording,

just record over it.

Safety Tab

To prevent accidental

erasure, break the tab.

To record again, cover

the hole with vinyl tape.

Recording and Playback Times

The camcorder records and plays back in VHS standard speed (SP). The chart shows

the maximum SP recording times for popular VHS cassettes.

CASSETTE RECORDING TIME

T-60

T-120

T-160

T-180

60 Min.

2 Hrs.

2 Hrs., 40 Min.

3 Hrs.

Video Cassettes

Inserting and Removing Cassettes

Safety Tab

STOP/EJECT

Caution: Insert

cassette with

safety tab facing

up and tape

windows facing

out. Cassette

should slide

easily into the

compartment.

Gently push the

cassette down

until it locks

into place.

Tape Windows

Press Here to Close

3. Insert or remove the cassette from the

cassette compartment.

1. Attach a power source to the

camcorder (either a charged battery or

adapter/charger).

4. Gently close the cassette door with

your hand.

2. Press STOP/EJECT on the top of the

camcorder to open cassette door.

Cassette Care and Storage

Follow these directions for continued high-quality performance from your cassettes.

• When you are finished with a cassette,

rewind it and remove it from the

camcorder.

• Keep cassettes away from strong

magnetic fields, such as electric motors

and other devices.

• Label and store cassettes vertically in

their protective cases at normal room

temperatures. Excessive heat or cold

may damage your cassettes.

• Do not use a cassette if it has been

damaged or exposed to moisture. The

tape may jam or damage the camcorder.

• When you are finished recording, break

off the safety tab on the cassette to

prevent accidental erasure.

• Keep dust from entering the cassette

compartment. All dust is abrasive and

will cause excessive wear on the tape

and the camcorder’s recording or

playback heads.

• Do not leave your camcorder or

cassettes in a car or outdoors for an

extended period. Excessive heat or

cold may damage them.

Camcorder Traveling and Cassette Tips

Traveling Tips

Write down your camcorder’s serial

number and keep it separate from the

camcorder when traveling. If your

camcorder is lost or stolen, you will be

able to identify it.

Carry your camcorder in a carrying case

when traveling. See page 46 for a

specially designed soft case. An ordinary

suitcase or carry bag does not offer the

protection your camcorder needs. Treat

your camcorder as carry-on luggage to

protect it from rough handling.

Make sure you have any plug adapters

you need before taking your camcorder to

other countries. Consult your dealer.

Use extra care to avoid damage to your

camcorder and accessories when operating

them at a beach or pool. Spray, sand, and

dust should be avoided. If your lens has

been exposed to the elements, clean it

only with proper lens cleaning supplies.

Cassette Tips

Store your cassettes vertically in their

protective cases at normal room

temperature.

Do not use a cassette if it has been

damaged or exposed to moisture. The tape

may jam or damage your camcorder.

Do not leave your camcorder or cassettes

in a car or outdoors for an extended

period. Excessive heat or cold may

damage them.

When you are finished recording, break

off the safety tab on the cassette to prevent

accidental erasure.

Label your cassettes before storing them.

Camcorder Features

STOP/EJECT

F.FWD (Fast Forward)

REW (Rewind)/REVIEW

CAMERA/OFF/VCR Switch

Microphone

• Press REW/REVIEW to rewind the tape

to the beginning. Press STOP/EJECT to

stop rewinding.

Quick Review

Press REW/REVIEW when CAMERA/

OFF/VCR is in CAMERA and the

camcorder is in record pause to review

the last few seconds of a recording.

Microphone

The microphone picks up sound during a

recording. It is more sensitive to sounds

coming from the direction the lens is

pointed.

The camcorder will play back the last

few seconds of the recording, return the

tape to its previous position, and return to

record pause.

AI (Artificial Intelligence)

Tape Positioning

The camcorder will automatically adjust

focus, white balance and iris according to

the recording conditions.

When CAMERA/OFF/VCR is in VCR and

the camcorder is in the stop mode, you

can quickly fast-forward or rewind the

tape.

• Press F.FWD (fast forward) to fast

forward the tape. Press STOP/EJECT

to stop fast-forwarding.

Camcorder Features

Program AE (Auto Exposure)

Program auto exposure automatically selects the shutter speed and adjusts the iris

according to the shutter speed.

AE:60

Viewfinder Display

When DISPLAY is pressed, the AE

indicator for the shutter speed selected

(1/60, 1/100, 1/120, 1/180, 1/250, 1/350,

1/500, 1/750, 1/1000, 1/1500, 1/2000, or

1/4000 second) appears in the

viewfinder.

Auto Focus

The camcorder will focus on the subject in the center of the viewfinder.

Auto focus operates on the telephoto “T” side from approximately 3.6 feet to infinity

and on the wide-angle “W” side 3/8 of an inch from the lens surface to infinity.

The following conditions may prevent auto focus from operating properly.

• Subject has close foreground and

background far away.

• Subject not in center of the viewfinder.

• Subject with shiny surfaces or sharp

angles.

• Two subjects at different distances that

overlap.

• Recording in low-light situations.

• Recording through a window.

• Subject with distinct horizontal stripes

or small pattern.

Macro Focus

The macro-focus feature lets you focus on objects as close as 3/8 of an inch from the

camcorder lens.

Notes: Zooming is not possible when using

macro focus. To change the size of the

subject, move the camcorder’s lens closer or

farther away from it.

1. Press and hold zoom button “W” until

the lens is completely zoomed out.

2. Position the subject in the center of the

viewfinder.

For best results, increase illumination when

recording using macro focus.

Camcorder Features

Electronic Indexing

Each time you begin recording (after the camcorder has been turned off for at least

four hours), the camcorder will automatically record an index mark at the beginning of

the new recording.

When you play back the indexed tape in a VCR that has a compatible indexing feature

called “VHS Index Search System,” the invisible marks can be located automatically.

See your VCR owner’s manual for index playback instructions.

INDEX

Viewfinder Display

Note: The camcorder does not record index

marks every time you stop and start recording.

An index mark is recorded only once — at the

start of each day’s recording session (or

whenever the camcorder has been turned off

for at least four hours).

When DISPLAY is pressed so the display

appears in the viewfinder, INDEX will

appear briefly to let you know the

camcorder is recording an index mark.

Time Remaining Display

The time remaining display shows the amount of recording or playback time left on the

tape in the camcorder.

Viewfinder Display

calculates the time remaining. Once time

remaining has been calculated, it will

automatically be updated and readily

available as long as the same tape

remains in the camcorder.

When DISPLAY is pressed so the display

appears in the viewfinder, ”– – – – –”

will appear for approximately ten

seconds when you first start playing or

recording a tape while the camcorder

Viewfinder

The camcorder’s viewfinder is a miniature monitor that displays the picture seen by

the camcorder when recording. The viewfinder also can be used for viewing the tape

during playback.

When carrying or storing the camcorder, return the viewfinder to the original position

to prevent possible damage.

Viewfinder in

operating position

Eyepiece

Viewfinder

in carrying

or storing

position

Pull here

Caution: Pulling on the eyepiece may cause damage to the camcorder.

1. Grasp the viewfinder and rotate it

horizontally.

2. Pull the viewfinder out from the

camcorder and adjust the eyepiece for

convenient viewing.

Eyepiece Focus Control

Eyepiece Focus

Control

The eyepiece focus control lets you set

the focus of the viewfinder for your

personal vision. If you wear eyeglasses,

you probably can operate the camcorder

without them.

counter). Look through the viewfinder,

and adjust the eyepiece focus control for

your vision.

The eyepiece focus control does not

affect the focus of the picture actually

recorded by the camcorder.

Set the correct focus by focusing on one

of the viewfinder’s displays (such as the

Viewfinder

Eyepiece BRIGHT Control

BRIGHT

BRIGHT Control

Viewfinder brightness can be adjusted

by turning the BRIGHT control. This

does not affect the picture actually

recorded by the camcorder.

Tilt Adjustment

For convenient viewing, you can rotate the eyepiece about 225º degrees.

Caution: Do not

force the eyepiece

to rotate completely

around. This will

damage the

eyepiece and/or the

camcorder.

Displays in Viewfinder

Tape Counter

AE ShutterSpeed

AE:60

0000M

INDEX

Time Remaining

Battery Level

NO TAPE

INDEX Display

ZOOM

TAPE, NO TAPE,

and TAPE END

10:30AM

Status

REC

11/18/1996

Time and Date

Viewfinder Displays

AE (Auto Exposure) Shutter Speed

The shutter speed selected by the

camcorder appears here. It is not

recorded on the tape.

• Press DISPLAY to display the

shutter speed.

Tape Counter with Memory

Stop (M)

The tape counter helps you locate

tape segments. It is not recorded on

the tape.

• Press DISPLAY to turn memory

stop on or off.

• Details are on pages 28-29.

ZOOM

The zoom level indicator appears

when you press power zoom button

T or W.

• Press DISPLAY to display the

zoom level indicator.

Time Remaining (

)

This display shows the amount of

recording or playback time

remaining on the tape. It is not

recorded on the tape.

• Details are on page 30.

• Press DISPLAY to display the time

remaining.

• Details are on page 21.

Status

The following displays appear in

this area. They are not recorded on

the tape.

Battery Level (

)

• REC for recording.

This indicator shows the amount of

time left for the rechargeable

battery. It is not recorded on the

tape.

• Press DISPLAY to display the

battery level.

•

during fast forward.

during rewind.

during record pause.

• Details are on page 14.

Displays in Viewfinder

DATE/TIME

DISPLAY

CAMERA/OFF/VCR

Power

Zoom

Buttons

INDEX

• TAPE END flashes when you have

approximately five minutes

recording time left on the cassette.

• TAPE END briefly appears when

you reach the end of the cassette

during recording.

When DISPLAY is pressed, the

display appears in the viewfinder.

INDEX appears briefly when the

camcorder automatically indexes the

tape. It is not recorded on the tape.

Details are on page 21.

• These displays are not recorded

when they appear.

TAPE, NO TAPE, and TAPE END

• TAPE flashes when you try to

record and the safety tab has been

removed.

• TAPE flashes when a damaged

tape is inserted. Remove the tape

and replace it with a new one.

• NO TAPE flashes when you try to

record and there is no cassette in

the camcorder.

Time and Date Display

• Press DATE/TIME repeatedly to

display time and date, AUTO date,

TITLE and date, date only, or no

date display when the camcorder

is in record pause.

• These displays are recorded when

they appear.

• Details are on pages 26-27.

Date and Time Display

Set the Time and Date

REW (Rewind)/REVIEW

F.FWD (Fast Forward)

CAMERA/OFF/VCR

STOP/EJECT

DATE/TIME

1. Attach a power supply (battery or

adapter/charger) to the camcorder.

5. When the correct digit is displayed,

press STOP/EJECT. The cursor will

move to the next part of the display.

2. Press and hold the small button on

CAMERA/OFF/VCR and place in

CAMERA.

6. Repeat steps 4 and 5 to set the correct

month, day, year, hour, minute(s), and

AM/PM.

3. Press DATE/TIME to display the date

and time in the viewfinder. A flashing

cursor lets you know which part of

the display you are setting.

7. After setting AM or PM, press

DATE/TIME to remove the flashing

cursor and start the internal clock.

Note: If flashing cursor does not appear,

press and hold DATE/TIME and then press

STOP/EJECT.

To Correct the Date or Time

To correct the date or time, press and

hold DATE/TIME and then press

STOP/EJECT. The display will appear in

the viewfinder along with the flashing

cursor. Use F.FWD and REW/REVIEW to

correct the time or date. Press

12:00AM

1/ 1/1996

DATE/TIME to remove the flashing

cursor and start the clock.

4. Repeatedly press F.FWD or

REW/REVIEW until correct month

appears. Press and hold the button to

advance the digits faster.

Date and Time Display

Recording Date and Time, Date, or Date and Title on Your Tape

The time and date, date only, or date and title can be recorded on your tape. Whenever

one of the displays appears in the viewfinder, it will be recorded. The camcorder also

has auto date and auto title features.

Repeatedly Press

DATE/ TIME

10:30AM

AUTO

11/18/1996

Date and Time

Auto Date

No Display

TITLE

11/18/1996

Auto Title

Date Only

To Select Display to Record

• Select TITLE to automatically

record the title and date for 10

seconds at the beginning of the

recording.

• Select date only to continuously

record the date.

1. Repeatedly press DATE/TIME to select

the display you want to record.

• Select date and time to continuously

record the date and time.

• Select AUTO to automatically

record the date for 10 seconds at the

beginning of the recording.

• Select no display if you do not want

any of the displays recorded.

Charging the Camcorder’s Built-in Clock Battery

The camcorder has a built-in rechargeable clock battery.

This battery must be charged approximately every two months.

1. Attach a power supply (adapter/ charger

or charged battery) to the camcorder.

Cautions: If this battery is not charged

every two months, it will over-discharge

and shorten its useful life.

2. Make sure CAMERA/OFF/VCR is

in OFF.

Do not attempt to replace this battery.

Take the camcorder to an authorized

Servicenter.

3. Leave the power supply attached at least

24 hours.

Tape Counter with Memory Stop

The tape counter acts as a handy reference to help you locate tape segments.

CAMERA/OFF/VCR

RESET

DISPLAY

REW/REVIEW

F.FWD

REC/PAUSE

Tape Counter with Memory Stop

Memory Stop

The tape counter’s memory stop helps you locate a certain point on the tape. When

memory stop is turned on, the tape will stop automatically during fast forward or

rewind when the tape counter reaches “0000M.”

Using Memory Stop:

1. Press DISPLAY to display the tape

4. Make sure CAMERA/OFF/VCR is in

VCR. Then press REW/REVIEW. The

tape will rewind until it reaches the

tape counter reading of “0000M.”

counter with “M.”

2. Locate the place on the tape you want

to return to and press RESET to reset

tape counter to “0000M.”

Memory

Stop On

0000M

Notes: Press DISPLAY to turn memory-stop

feature on or off.

Whenever memory stop is turned on, the

camcorder will stop rewinding or fast

forwarding when the counter reaches

“0000M.” To continue rewinding or fast

forwarding the tape, press REW (rewind) or

F.FWD (fast forward) again.

3. Continue to record or play the tape.

When you want to return to the place

you marked, press REC/PAUSE to

stop recording, or press STOP/EJECT

to stop playback.

The tape counter is automatically reset to

“0000” whenever a cassette is inserted.

Zooming

Using Power Zoom Buttons

Power Zoom Buttons

T = Telephoto

W = Wide Angle

Zoom Level Indicator

• Press “W” to move the lens in the

“wide-angle” direction.

When DISPLAY is pressed so the display

appears in the viewfinder and the power

zoom button is pressed, the zoom level is

displayed in 10 steps for several seconds.

• Press “T” to move the lens in the

“telephoto” (close-up) direction.

ProEdit Features

ProEdit^®System

• Edit Search

• Titler

The camcorder incorporates a complete package of advanced editing features

to make it easy and fun to edit your home videos like a professional. The

major ProEdit^®System features are described here and on the following pages.

Edit Search

The edit-search feature allows you to edit as you

make your recording by using F.FWD,

REW/REVIEW, and PLAY to precisely position the

tape while the camcorder is in record pause.

• Press and hold REW/REVIEW to visually search

the recorded tape in reverse.

• Press and hold F.FWD to visually search forward

on the recorded tape.

• Press and hold PLAY to view the recorded tape at

normal speed.

When you release the button, the camcorder will

return to record pause at that point on the tape.

ProEdit Features

Titler

The camcorder’s built-in titler can store a title in

memory. The created title can be displayed and

recorded at any time.

The built-in character register contains over 45

different characters for creating your titles. The title

can contain up to 32 characters on two lines.

Title Select – (Also

REW/REVIEW)

Title Select +

(Also F.FWD)

CAMERA/OFF/VCR

TITLER

EDIT•ADV

(Also STOP/EJECT)

ProEdit Features

To Create a Title

See the “Chart of Characters in Titler’s

available.

1. Attach a power source to the

camcorder, press and hold the small

button on CAMERA/OFF/VCR while

sliding it to CAMERA.

5. After you have selected the first

character, press EDIT•ADV to move

the flashing cursor where you want

your next character to appear.

6. Repeat steps 4 and 5 until you have

completed the title.

2. Press TITLER to display titler

graphics in the viewfinder. A

flashing cursor will appear.

3. Press EDIT•ADV to move the flashing

cursor to the place you want to begin

your title.

4. Select the first character for your title

by pressing the Title Select + button

or the – button until the character you

want appears in the viewfinder.

7. When you are finished, press TITLER

to store the title and remove the title

display from the viewfinder.

Important Note: Remember to remove the

titler graphics from the viewfinder for normal

recording.

To Correct an Error

1. Press TITLER to display the titler

3. Press the Title Select + button or the

– button until the correct character

appears.

graphics in the viewfinder.

2. Press EDIT•ADV until the flashing

cursor is placed over the character you

wish to correct.

Note: If you want to delete a character,

press + or – until the blank space appears.

Chart of Characters in Titler’s Register

A B C D E F G H I J K L M N O P Q R S

T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ? ’

. / , – ; : < > ! (BLANK)

ProEdit Features

Recording a Title on a Tape in the Camcorder

To record a title on a tape in the camcorder, follow the steps below.

1. Attach a power source to the

camcorder, slide CAMERA/OFF/VCR

to CAMERA.

5. After you have recorded the title for

the desired length of time, press

TITLER to remove titler graphics from

the viewfinder. The camcorder will

now record as normal. If you do not

want to continue recording, press

REC/PAUSE.

2. Locate the place on the tape where

you want to record the title.

Notes: If you record a title on a pre-

recorded tape, the audio and video will be

erased where the title is inserted. There will

also be a three-to-four second pause of

blank tape before the existing audio and

video return.

Important Note: Remember to remove the

titler graphics from the viewfinder for normal

recording.

Note: You can also use the automatic title

recording feature to automatically record the

title and date for 10 seconds when you begin

recording. Press DATE/TIME to display

TITLE before starting to record.

3. Press TITLER to display the titler

graphics in the viewfinder.

4. Press REC/PAUSE to start recording

the title.

Recording a Title While Copying a Tape from Camcorder to Another VCR

This method of adding titles lets you keep the original tape as it is, and add titles to the

copy you are making on another VCR. Connect your camcorder to a VCR as shown on

pages 38-39.

1. Attach a power source to the

camcorder.

6. After you have recorded the title for

the desired time, press TITLER to stop

recording the title.

2. Place the tape you want to copy in the

camcorder and place

7. Stop the camcorder and VCR when

you are finished copying the tape.

CAMERA/OFF/VCR in VCR.

Important Note: Remember to remove the

titler graphics from the viewfinder for normal

playback.

3. Place a blank tape in the VCR, and

place the VCR in record pause.

4. Start copying the tape from the

camcorder to the VCR. Details for

copying a tape are on pages 38-39.

5. When you see the place on the tape

you want to insert the title, press

TITLER.

Recording Tips

Make a recording of your home and

contents to store in a safe place in case of

fire or theft.

Avoid long “still” shots of landmarks and

scenic attractions. Recordings are more

interesting if they include people and

details. “Local color” will give travel

videos lasting appeal. Consider recording

a familiar or landmark scene from an

unfamiliar vantage point for added

interest. Remember to check the lighting

before starting to record.

Practice recording under a variety of

lighting conditions. This will help you

respond quickly whenever you see a scene

you want to record.

Do not move the camcorder rapidly from

side-to-side while recording. A steady,

gradual “pan” avoids blurring and “jitter”.

Try to avoid taping backlit subjects

indoors. Bright light behind your subject

may cause the subject to appear too dark.

Use the viewfinder to make sure the

camcorder is level while recording or your

scenes will appear “tilted”.

Include close-up shots of individuals

when taping family outings or group

functions.

Make sure indoor scenes are well-lit to

improve picture quality and color

reproduction.

For a different perspective, try kneeling

down (or laying) on the floor when

recording children or pets.

Do not bump or tap the camcorder’s

microphone while recording because this

sound will be recorded.

Be aware of video and audio backgrounds.

Background details barely noticed while

you are taping may show up as visual

“clutter” on your recording. Background

noises (especially TV sets, radios,

household appliances, traffic sounds, etc.)

can detract from the sound you want to

record.

Viewfinder Playback and Playback Features

REW (Rewind)/REVIEW

CAMERA/OFF/VCR

Switch in VCR position

F.FWD (Fast Forward)

STOP/EJECT

TRACKING

Viewfinder Playback

1. Attach a power supply to the

camcorder.

4. Press PLAY to begin playback. Adjust

TRACKING if necessary.

2. Press and hold the small button on

CAMERA/OFF/VCR while sliding it

to VCR.

5. Press STOP/EJECT when you are

finished.

3. Press STOP/EJECT and insert the

cassette you want to play back.

Note: The camcorder can only play back

tapes recorded at SP speed.

Viewfinder Playback and Playback Features

Playback Features

Picture Search

Stop-Action Pause

During playback you can visually search

the tape at a higher speed in forward or

reverse.

During playback, you can view one

frame of the tape.

• Press REC/PAUSE to stop the action.

• Press and hold F.FWD to search the

tape forward.

• Press REC/PAUSE again to return to

normal playback.

• Press and hold REW/REVIEW to

search the tape in reverse.

Caution: Pause is designed for

momentary interruptions and should not

be used for an extended period of time.

If the camcorder remains in pause for

more than five minutes, it will

automatically remove the tape from the

spinning heads to prevent excessive

tape wear.

• Release the button to return to normal

playback.

Tracking

TRACKING

(Also Power Zoom)

Remove the cassette to reset the

camcorder’s tracking to its preset center.

When you play a tape not recorded on

your camcorder, streaks may appear.

To remove the streaks, press either

TRACKING button to move the streaks

up or down and out of the picture.

The TRACKING buttons only affect tape

playback. They have no effect during

recording.

Press either TRACKING button during

stop-action (play-pause) to reduce picture

“jitter” (picture bouncing up or down).

Playback on a TV or VCR with AUDIO and VIDEO IN Jacks

To connect your camcorder to a TV monitor (or VCR) with AUDIO IN and VIDEO IN

jacks, you will need an optional audio/video cable, such as VH83 shown on page 48. If

your TV is already connected to a VCR, you can attach the camcorder to the VCR and

watch what the camcorder is recording or playing on the TV.

Yellow

White

AUDIO

Jack

VIDEO

White Audio Plug

Jack

AUDIO

Yellow

Video Plug

VIDEO

Audio/Video Cable

(such as VH83)

Back of

VCR or

TV Monitor

Yellow Video Plug

White

Audio Plug

–OR–

Yellow

Video Plug

White

Audio Plug

AUDIO

White Audio Plug

Y-Adapter

(such as AH25)

Audio/Video Cable

(such as VH83)

VIDEO

Back of

Stereo

VCR or

TV Monitor

Yellow Video Plug

Caution: The unauthorized recording of television programs and other materials

may infringe the rights of others.

Playback on a TV or VCR with AUDIO and VIDEO IN Jacks

Attach the yellow plug on the same

end of the audio/video cable to the

VIDEO IN jack on the TV or VCR.

Attach the white plug on one end of

the audio/video cable to the AUDIO

IN jack on the TV or VCR.

Note: If your TV (or VCR) has stereo

left and right AUDIO IN jacks, attach the

plug to the one labeled MONO. If one of

the jacks is not labeled MONO, you may

need a Y-adapter, such as AH25 shown

on page 48, to hear both channels.

Attach the yellow plug on the other

end of the audio/video cable to the

yellow VIDEO jack and the white

plug to the white AUDIO jack on the

side of the camcorder.

Playback Operation and How to Copy Tapes on a VCR

switch while sliding it to VCR. Insert

the cassette you want to playback (or

copy).

1. A. Camcorder connected directly to

TV monitor: Turn on the TV and

tune it to its video input channel.

Note: The camcorder can only play back

tapes recorded at the SP speed.

B. Camcorder connected to VCR that

is already connected to TV: Turn on

VCR and place it in the “line” or

“camera” mode. (If your VCR does

not have a “line” or “camera”

mode, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

3. Press PLAY on the camcorder. To copy

what the camcorder is playing, place a

blank cassette in the VCR and start the

VCR recording. Adjust the tracking on

the camcorder if necessary. Details are

on page 37.

• During playback, use the playback

coming from the VCR.

features described on page 37.

2. Press and hold the small button on the

4. Press STOP/EJECT when you are

camcorder’s CAMERA/OFF/VCR

finished.

Watching What the Camcorder is Seeing or Recording on the TV

2. Press and hold the small button on the

camcorder’s CAMERA/OFF/VCR

switch while sliding it to CAMERA.

Insert the cassette you want to

record on.

Note: When the camcorder is used as a

camera, turn the TV’s volume down to

prevent a high-pitched squeal caused by

feedback.

3. Press the camcorder’s REC/PAUSE

button to begin recording. You can

watch what the camcorder is seeing or

recording on the TV screen.

1. A. Camcorder connected directly to

TV: Turn on the TV, and tune it to

its video input channel.

B. Camcorder connected to VCR that

is already connected to TV: Turn on

VCR and place it in the “line” or

“camera” mode. (If your VCR does

not have a “line” or “camera”

mode, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

coming from the VCR.

Playback on a TV Without Audio and Video Inputs

To connect your camcorder to a TV without audio and video input jacks. You will

need an optional RF output adapter (such as CRF95) and an optional coaxial RF cable

(such as VH82 or VH85) shown on page 48.

Antenna

Optional 300/75 ohm

Transformer

(such as 193983)

Back of TV

VHF

Channel Selector

FROM

ANT

VHF

Optional RF Output Adapter

(such as CRF95)

Optional 75-300 Ohm

Transformer

Optional Coaxial RF Cable

(such as VH82 or VH85)

OUT

TO TV

Disconnect the VHF antenna from

your TV. If you are going to leave

the RF adapter connected to the TV,

connect the antenna to the RF output

adapter.

2 Attach one end of coaxial RF cable

to OUT TO TV connector on RF

adapter, and attach other end of the

cable to VHF input on TV as shown.

Note: If TV has screw terminals, you

may need an optional 75-to-300 ohm

transformer, such as AH011.

A.If antenna is round 75-ohm cable,

connect it to IN FROM ANT

3 Attach RF output adapter’s yellow

plug to the VIDEO jack, small plug

to the RF DC OUT jack, and white

plug to the AUDIO jack on the side

of the camcorder.

connector on RF output adapter.

B.If antenna is flat twin-lead,

connect flat-lead connectors to

screw terminals on optional 300-

75 ohm transformer. Then connect

transformer to IN FROM ANT

connector on RF output adapter.

Playback on a TV Without Audio and Video Inputs

5. Press PLAY on the camcorder. Adjust

tracking on the camcorder, if

necessary. Details are on page 37.

Playback Operation

1. Set the channel selector switch on the

RF output adapter to CH3 or CH4.

• During playback, use the playback

features described on page 37.

2. Turn on the TV and tune it to the same

channel (3 or 4) you selected with the

channel selector switch on the RF

output adapter.

6. Press STOP/EJECT on the camcorder

when you are finished playing back the

tape.

3. Press and hold the small button on the

camcorder’s CAMERA/OFF/VCR

switch while sliding it to VCR.

4. Insert the cassette you want to play

back into the camcorder.

Note: The camcorder can only play back

tapes recorded at the SP speed.

Watch What the Camcorder is Seeing or Recording on the TV

1. Turn on the TV and tune it to channel

3 or 4 (the same channel you selected

with the CH3/CH4 switch on the RF

output adapter).

3. Press the camcorder’s REC/PAUSE

button to begin recording. You can

watch what the camcorder is seeing

or recording on the TV screen.

Note: When the camcorder is used as a

camera, turn the TV’s volume down to

prevent a high-pitched squeal caused by

feedback.

2. Press and hold the small button on the

camcorder’s CAMERA/OFF/VCR

switch while sliding it to CAMERA.

Insert the cassette you want to

record on.

Normal TV Viewing

from the camcorder or turn the

camcorder’s power off.

For normal TV viewing, you can leave

the RF output adapter hooked up to the

TV. Just disconnect the adapter’s plug

Note to Cable-TV Installer: This reminder is provided to call your attention to Article

820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code,

Part I), that provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building as close to the

point of cable entry as practical.

Color Enhancement Light

The color enhancement light helps create brighter, sharper pictures.

Light

LIGHT AUTO/OFF/ON

To Use the Color Enhancement Light

1. Attach the rechargeable battery or

AC adapter/charger to power the

camcorder.

and light automatically turn off.

Press REC/PAUSE to turn

camcorder back on.

Notes: Turn on the light only when you

need it. The power consumption of the

light is approximately two-thirds that of

the camcorder. When the light is on, the

operation time of the rechargeable

battery is reduced.

2. Press and hold the small button on

CAMERA/OFF/VCR and place it in

CAMERA.

3. Select a position for the LIGHT

AUTO/OFF/ON switch.

Avoid bumping or shaking the light

when in use. The light’s bulb is sensitive

when hot and may burn out.

• Place in AUTO to have the light

automatically turn on when the

camcorder is aimed at a dark object

and turn off when aimed at a bright

object.

Do not allow water to drop on the light

when in operation.

Dangers: During operation and after

using the light, the front surface and

bulb of the light will be very hot. To

avoid burns, do not touch them.

Note: A cassette must be inserted for

AUTO to operate.

• Place in ON to have the light turn on

whenever CAMERA/OFF/VCR is in

CAMERA.

To prevent overheating, do not block

or cover the ventilation holes on the

color enhancement light.

• Place in OFF to turn off the light.

Never use the color enhancement light in

the vicinity of explosives or highly

flammable materials.

If the camcorder is left in record pause

for more than five minutes, the power

Color Enhancement Light

Removing and Replacing the Front Case of the Light

Light

Bulb

Front Case

Reflection Plate

Lower Hook

To Remove and Replace Light Case

Notes: Do not touch the bulb with your

fingers. It may shorten its service life.

1. To remove front case, press and hold

the lower hook while removing it.

Make sure the front case of the light is

properly attached after removing it or

replacing a bulb.

2. To replace the front case, pass the

bulb through the hole of the reflection

plate, and attach the lower hook to the

light.

When replacing the bulb, only use #221111 to

reduce the risk of fire and other hazards.

3. Press front of case to light.

See the installation instructions packed with

the replacement bulb when replacing the bulb.

Caution: Use only bulb #221111 when

replacing the bulb to reduce the risk of

fire or other hazards.

Attaching the Shoulder Strap

The shoulder strap is designed to let you carry the camcorder from your shoulder and

— when you are ready to shoot — bring the camcorder to shooting position in one

quick movement.

Cautions: When carrying the camcorder with the shoulder strap, place the

viewfinder in its original position. This helps prevent possible damage to the

viewfinder from bumping against your body as you move.

Make sure the shoulder strap is firmly attached before using it to carry your camcorder.

To Attach the Shoulder Strap

1. Unfasten one end of the shoulder strap from the buckle. Make sure you leave the

buckle on the strap.

2. Thread one end of the shoulder strap through one of the shoulder strap rings as

shown below in diagrams A and B.

Diagram A

Diagram B

Shoulder Strap Rings

3. Thread the strap back into the buckle as shown below. Pull on the strap and make

sure it is fastened correctly and tightly before using it to support your camcorder.

4. Repeat steps 1–3 to attach the other end of the shoulder strap.

Information to User

This equipment has been tested and found to

comply with the limits for a Class B digital

device and RF lighting device, pursuant to

Part 15 and part 18 of the FCC Rules. These

limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

Alterations or modifications carried out

without appropriate authorization may

invalidate the user’s FCC right to operate the

equipment.

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences du

Réglement sur le matérial brouilleur du Canada.

Specifications

General

Camera Section

Power requirement: 9.6VDC

Power consumption: 8 watts (normal)

Weight: 4.4 lbs. (2 kg)

Scanning: 525 Lines/60 Fields/30

Frames

Image Sensor: 1/4” high/resolution,

solid state CCD imager

Dimensions:

Tripod Mount: One 1/4" x 20 threaded

hole

4-1/4"(W) x 8-3/8"(H) x 13-1/8"(D)

(108 x 213 x 334mm)

Lens: f1.6 — 12:1 (4-48mm)

Diameter: 46 mm

Video Recorder Section

Format: VHS

Adapter/Charger

Record/Playback System:

Power Requirement: 120 V 50/60 Hz

Power Consumption: 30 Watts (max)

Weight: (390 grams)

Two video record/playback heads

Headwheel Cylinder Diameter: 62 mm

Video Signal: EIA Standard NTSC

Color

Dimensions:

(78 x 52 x 155 mm)

Optional Accessories

We invite you to take a look at some great ideas for sparking creativity and adding to

the fun of using your camcorder. These pages have a selection of accessories to help

make your memorable moments look and sound even better.

To order accessories, contact your local dealer.

Accessories are available by calling toll-free or by using the order form. See

pages 51-52.

AC202 Soft Camcorder Case

This case provides exceptional protection and

utility for full size camcorders and most

accessories. It is constructed of rugged

nylon fabric for years of reliable service and

good looks.

Three outside pockets provide ample

accessory storage with mesh-covered lens

filter compartment and built-in holders for

memo pads, pens, and other accessories. The

hand grip and adjustable shoulder strap allow

for convenient, comfortable transportation of

the camcorder.

Optional Accessories

DCC096 DC (Battery) Car Cord

This DC car cord enables you to operate

your camcorder from your car, truck, or

RV by plugging the car cord directly into

the vehicle’s cigarette lighter.

Caution: Do not use any other car cord

with this camcorder.

CPS014 AC Adapter/Charger

This adapter/charger operates on 100-240

volts, 50/60 Hz, so it can be used almost

anywhere in the world to power your

camcorder and recharge the EP096FS

battery supplied with your camcorder.

It also charges the EP096FL battery. A

simple plug adapter may be required in

some countries.

These rechargeable lead-acid batteries

are specifically designed for long life.

The EP096FS can power your camcorder

up to one hour and the EP096FL up to

two hours (depending on how much you

use the light, zoom, and pause).

Both batteries can be recharged with

the AC adapter/charger that came

packed with your camcorder. First

charging takes approximately two

hours for the EP096FS and three

hours for the EP096FL.

Optional Accessories

VH83 Audio/Video Cable

This six foot audio/video dubbing cable is used to

connect your camcorder to a VCR or TV monitor to

copy tapes.

CRF95 RF Output Adapter

This adapter is used with coaxial RF cable (VH82 or VH85) to

connect your camcorder to a standard TV (one without

audio/video input jacks) for playback. If your antenna cable is

the flat twin-lead type attached by two screws, you will also

need a 300-75 ohm transformer such as 193983. If your TV

has 300 ohm antenna screw terminals, you will need an

optional 75/300 ohm transformer such as AH011.

Coaxial RF Cables

These RF cables are used with the RF output adapter to

connect your camcorder to a standard TV (one without

audio/video input jacks) for playback.

If your antenna cable is the flat twin-lead type attached by

two screws, you will also need a 300-75 ohm transformer

such as 193983.

VH82 (6-ft)

If your TV has 300 ohm antenna screw terminals, you will

need an optional 75-300 ohm transformer such as AH011.

VH85 (12-ft)

193983 Cable Transformer

This 300-to-75 ohm transformer is used to connect a

standard 300-ohm antenna twin-lead to a standard round

75-ohm connector.

AH011 Cable Transformer

This 75-to-300 ohm transformer is used to connect a

standard 75-ohm antenna cable, such as AH065G or

AH066G, to the 300-ohm screw terminals on a TV.

AH25 Y-Adapter

This Y-adapter allows you to connect your camcorder’s mono

audio cable to a stereo TV or VCR.

Optional Accessories

Removing the Lens Hood

The lens hood can be removed so you can attach optional accessories, such as wide-

angle lens, lens extender, or lens filter kit. Do not grasp the end of the lens hood.

Attach the lens cap over the lens hood, then turn them counterclockwise to

remove them.

Attaching Accessory Lens

Remove the lens hood as shown above.

Turn the accessory lens clockwise into the camcorder’s lens. Make sure the lens is

tightened firmly, but do not over tighten.

All specifications and descriptions of accessories are subject to change without notice.

Optional Accessories

Using an Optional Tripod

Mounting the camcorder on a tripod, such as AC093, will keep the camcorder steady

and produce excellent video results.

AC093 Deluxe Tripod

This tripod’s fluid effect head provides

smooth camera pan and tilt. Its quick-

release mount makes it easy to attach or

remove the camcorder. The grooved,

tubular 3-section leg design folds down

to 24" when not in use and weighs only

4-1/4 lbs. Rubber feet allow for sure

footing and the built-in retractable leg

spikes eliminate the need for removing

the feet.

Caution: Before using a tripod, make sure it is stable enough to hold the camcorder

without falling over. Do not transport the camcorder attached to the tripod.

When attaching your camcorder to a tripod, be careful not to force the tripod screw

into the camcorder’s tripod mounting hole.

The tripod screw should not protrude into the camcorder more than approximately

three-eighth (3/8) inch. Forcing the screw could damage the mounting hole on the

bottom of the camcorder.

All specifications and descriptions of accessories are subject to change without notice.

Accessory Order Form

Order Form for Camcorder Models CC432

Description

Soft Camcorder Case

Deluxe Tripod

Audio/Video Cable

Cable Transformer

RF Coaxial Cable (6-ft.)

RF Coaxial Cable (12-ft.)

Y-Adapter

Part No.

AC202

AC093

VH83

AH011

VH82

Price

$ 49.95

$ 59.95

Qty.

Total

4.39

1.59

3.29

5.75

1.95

VH85

AH25

Rechargeable Battery

AC Adapter/Charger

RF Output Adapter

Car Cord

300-75 Cable Transformer

DC Cable

Shoulder Strap

EP096FS

EP096FL

CPS014

CRF95

DCC096

193983

233328

227327

$ 69.95

$ 79.95

$219.95

$ 69.95

$ 49.95

$ 10.00

$ 12.40

$ 10.35

Replacement Bulb (4 watt)

for Built-in Light

AC Adapter/Charger (Supplied)

221111

232595

$ 12.95

$115.55

Total Merchandise...........................................................

$__________

Sales Tax.........................................................................

We are required by law to collect the appropriate sales tax

for each individual state, county, and locality to which

the merchandise is being sent.

Shipping and Handling....................................................

5.00

Total Amount Enclosed ................................................

Use VISA, MasterCard, or Discover Card.

Money order or check must be in U.S. currency only.

No COD or cash.

$__________

Prices are subject to change without notice.

• Allow 4 weeks for delivery.

• All accessories are subject to availability.

• Where applicable, we will ship a superseding model.

Please complete other side also

Accessory Order Form

Charge your order on your VISA,

MasterCard, or Discover Card by

filling in below

USE YOUR CREDIT CARD

IMPORTANT: Copy complete account number

from your VISA card

My card expires:

IMPORTANT: Copy complete account number

from your MasterCard

Copy Number

above your

name on

My card

expires:

MasterCard

IMPORTANT: Copy complete account number

from your Discover Card

My card expires:

AUTHORIZED SIGNATURE

Prices are subject to change without notice.

Print or type your name and

address clearly. This will be

your mailing label.

A complete and correct

order will save you days

of waiting.

Name:

Street:

Apt:

Zip:

City:

State:

Please make sure that both sides of this form

have been filled out completely.

Accessory Order Form

To order accessories, contact your local Dealer.

If a dealer is not nearby, you can also follow the directions below to order by

telephone or direct-by-mail.

United States and Canada Orders

To place your order by phone, have your Visa, MasterCard, or Discover Card ready

and call the toll-free number listed below between 8AM and 8PM (EST) Mon. - Fri.,

or 9AM - 5PM (EST) Sat. Use this number only to place an order for accessory

items listed on this order form.

1 – 800 – 338 – 0376

To place your order by mail, detach and mail the completed order form with credit

card information, money order, or check in U.S. currency (made payable to Thomson

Consumer Electronics, Inc.) to the following address:

Video Accessories

PO Box 8419

Ronks, PA 17573

Care and Maintenance

Keep dust and grit from entering the

camcorder’s cassette door. Dust and grit

are abrasive and cause excessive wear to

both the camcorder’s recording and

playback heads and cassettes.

Always replace the lens cap on the lens

when the camcorder is not in use.

The camcorder can be damaged by

improper storage or handling. Do not

subject the camcorder to swinging,

shaking, or dropping.

Do not use strong or abrasive detergents

when cleaning your camcorder. They

may damage the camcorder.

Do not store the camcorder in

temperatures below -22ºF (-30ºC) or

above 149ºF (65ºC).

Before handling your camcorder, make

sure your hands and face are free from

any chemical products such as suntan

lotion, as it may damage the finish.

When the camcorder is not in use, always

remove the cassette and AC adapter/

charger or battery.

Do not touch the lens with your fingers!

The oil from your skin may damage the

lens. To clean the lens, always use lens-

cleaning tissues and a commercially

prepared cleaning solution designed for

use on camera lens.

Retain the original carton for future

storage or shipping purposes.

Things to Avoid

Do not aim your camcorder at the sun or

other bright objects or leave your

camcorder in direct sunlight. Doing so

could permanently damage the

Do not operate or leave your

camcorder in extremely humid

environments.

Do not operate the camcorder for

extended periods in temperatures

below 40ºF (4ºC) or above 95ºF

(35ºC).

camcorder’s internal parts.

Avoid operating your camcorder after

moving it from a cold location to a warm

location. Moisture may cause the tape to

stick to the headwheel and damage the

headwheel or tape. Give the camcorder 2

to 3 hours to reach a stable temperature

before inserting a cassette.

Do not expose the camcorder or

adapter/charger to rain or moisture.

If either component becomes wet,

turn off the power and take the unit to

an Authorized RCA Camcorder

Servicenter.

Care and Maintenance

Cleaning the Camcorder

To clean the camcorder’s exterior, remove any power source connected to the

camcorder and gently wipe it with a clean soft cloth.

Caution: Use of strong cleaning

products, such as those containing

alcohol or benzine, may damage

the camcorder.

Cleaning the Camcorder’s Lens

To clean the camcorder’s lens, blow it with a blower brush, and then gently wipe the

lens with cleaning tissue and commercially prepared cleaning solution designed for use

on camera lens. Improper cleaning may scratch the lens.

Caution: Do not touch the lens

with your fingers. The oil from

your skin can damage the lens.

Cleaning the Camcorder’s Viewfinder

The viewfinder eyepiece can be removed for cleaning.

1. Turn the eyepiece counterclockwise and pull it

out.

2. Gently use a cotton swab or blower brush to

remove the dust.

3. Reattach the eyepiece by aligning the reference

marks, and then turn the eyepiece clockwise until

it clicks.

Mark

Trouble Checks

Troubles sometimes are caused by simple “faults” that you can easily correct without

the help of a service technician by first checking a few basic remedies.

Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter,

look below for the type of trouble you are experiencing. Then perform the simple

checks and adjustments listed for that trouble.

Trouble

Checks and Adjustments

No Power

• If using the rechargeable battery, it may need

recharging.

• If using the AC adapter/charger, make sure it is

plugged into a working AC outlet.

Will Not Record or

Play Back

• Make sure there is a cassette in the camcorder.

• Try ejecting and re-inserting the cassette.

• The cassette tape is broken — try another cassette.

• You have reached the end of the cassette — try

rewinding it.

• Moisture condensation may cause the tape to stick to

the headwheel and damage the headwheel or tape.

Give the camcorder 2 to 3 hours to reach a stable

temperature before re-inserting a cassette.

Will Not Play Back

Will Not Record

• CAMERA/OFF/VCR switch must be in VCR.

• Safety tab has been removed from cassette.

See page 16.

• CAMERA/OFF/VCR switch must be in CAMERA.

No Picture in Viewfinder

• Make sure the lens cap has been removed.

Tape Does Not Rewind

or Fast Forward

• Make sure titler graphics do not appear in viewfinder.

Press TITLER to remove them.

Tape Stops During

Rewind or Fast

Forward

• The tape counter’s memory-stop feature may be

turned on. When an “M” appears behind the tape-

counter display, the camcorder will stop rewinding or

fast-forwarding when the counter reads “0000M”.

Press the REW/REVIEW or F.FWD button again to

continue, or press DISPLAY to turn off memory stop.

Trouble Checks

Trouble

Checks and Adjustments

Camcorder Remains

in Play Pause

• Press REC/PAUSE to return to normal playback.

Poor Picture Quality

During Recording

• There is insufficient light. Add more light.

• Use the color enhancement light to add more light.

Details are on pages 42-43.

Viewfinder Displays Are

Out of Focus

• Try adjusting the eyepiece focus control. Details are

on page 22.

Poor Auto-Focus

Operation

• Lens may be smudged and image appears unfocused.

• Viewfinder eyepiece focus or BRIGHT control may

be adjusted incorrectly. Details are on pages 22-23.

Poor Picture Quality

During Playback

• Tape was recorded on a different camcorder or VCR.

If the picture contains black-and-white streaks, press

one of the TRACKING buttons to correct.

• Camcorder only has one speed (SP). If the tape was

recorded on a different VCR at a different speed, it

cannot be played back in this camcorder.

Recorded Audio is Too

Low

• Subject may have been too far from the camcorder.

AE Shutter-Speed or

INDEX Indicator Does

Not Appear in

• CAMERA/OFF/VCR switch must be in CAMERA,

and press DISPLAY to display the indications.

Viewfinder

Date and Time (or Date)

were Recorded on the

Tape

• Date and time (or date) will be recorded on the tape

whenever they appear in the viewfinder. Press

DATE/TIME to remove them from the viewfinder

when recording.

Trouble Checks

Trouble

Checks and Adjustments

Date and Time Appear

Incorrect

• Make sure the date and time have been set. Details on

page 26.

• The camcorder’s internal clock battery may need

recharging. Details on page 27.

Camcorder Does Not

Turn On and/or

Function Buttons Will

Not Operate

• Remove the power source.

After one minute press the

reset switch gently using a

non-metallic pointed item,

such as a toothpick, until

you feel a click. This resets

the camcorder to the factory

settings and erases the date,

time, and custom settings.

Note: When connecting a

Reset Switch

power source again, wait for

about one minute after the

reset switch is pressed.

Limited Warranty

What your warranty covers:

• Any defect in material or

workmanship.

For how long after your purchase:

• Ninety days for labor charges.

(1) a copy of your sales receipt or other

evidence of purchase date, (2) your

name and address, and (3) a brief

description of the problem.

• Ship the camcorder to an Authorized

RCA Camcorder Servicenter.

• One year for parts.

• Pay any charges billed to you by the

Servicenter for service not covered by

the warranty.

The warranty period for rental units

begins with the first rental or 45 days

from date of shipment to the rental

firm, whichever comes first.

What your warranty does not cover:

• Customer instruction. (Your owner’s

manual clearly describes how to install,

adjust, and operate your camcorder.

Any additional information should be

obtained from your dealer.)

What we will do:

• Pay any Authorized RCA Camcorder

Servicenter the labor charges to repair

your camcorder.

• Pay any Authorized RCA Camcorder

Servicenter for the new or, at our

option, refurbished replacement parts

required to repair your camcorder.

• Installation and related adjustments.

• Cleaning of video/audio heads.

• Damage from misuse or neglect.

• Battery for clock or other features.

How you get service:

• Check with your RCA Camcorder

Dealer or call 1-800-336-1900 for the

Authorized RCA Camcorder

Servicenter nearest you. State that you

have an RCA camcorder.

• A camcorder that has been modified or

incorporated into other products or is

used for institutional or other

commercial purposes.

If an Authorized RCA Camcorder

Servicenter is conveniently near you:

• Take your camcorder to the Authorized

RCA Camcorder Servicenter of your

choice.

• A camcorder purchased or serviced

outside the USA.

• Acts of God, such as but not limited to

lightning damage.

Product Registration:

• Show the service center representative

your sales receipt or other evidence of

purchase date.

• Please complete and mail the product

registration card packed with your

camcorder. It will make it easier to

contact you should it ever be necessary.

The return of the card is not required

for warranty coverage.

• Pick up your camcorder when repairs

are completed.

If an Authorized RCA Camcorder

Servicenter is not located conveniently

near you:

• Pack the camcorder so that it will not

be damaged during shipping. (We

recommend using the original carton

and packing materials.) Include any

cables and other accessories originally

furnished with the camcorder.

How state law relates to this warranty:

• This warranty gives you specific legal

rights and you also may have other

rights that vary from state to state.

If you purchased your camcorder

outside the United States:

• This warranty does not apply. Contact

your dealer for warranty information.

• Include in the camcorder carton

Index

Accessories, Included . . . . . . . . . . . . . .3

Accessories, Optional . . . . . . . . . .46-53

Accessory Lens, Attaching . . . . . . . . .49

Accessory Order Form . . . . . . . . . .51-53

Adapter/Charger, Using . . . . . . . . . .4,10

Adjustments and Checks . . . . . . . .56-58

AE Displays . . . . . . . . . . . . . . . . . .20,24

AI (Artificial Intelligence) . . . . . . . . .19

Assistance . . . . . . . . . . . . . . . . . . . . . .59

Attaching Adapter/Charger . . . . . . .4,10

Attaching the Rechargeable Battery . .12

Attaching the Shoulder Strap . . . . . . .44

AUDIO/VIDEO Jacks . . . . . .8,38-39,40

AUTO Date Display . . . . . . . . . . . . . .27

Battery, Attaching and Removing . . . .12

Battery Care and Storage . . . . . . . . . .13

Battery Charging . . . . . . . . . . . . . . . . .11

Battery, Clock . . . . . . . . . . . . . . . . . . .27

BATTERY EJECT Lever . . . . . . . . .9,12

Battery Level Indicator . . . . . . . . .14,24

Battery, Rechargeable . . . . . . . . . .11-14

Battery Safety Precautions . . . . . . . . .13

BRIGHT Control . . . . . . . . . . . . . . . . .23

Bulb Replacement,Video Light . . . . .43

Camcorder, Cleaning . . . . . . . . . . . . .55

Camcorder Operating Controls . . . . .8-9

Camcorder, Powering . . . . . . . . . .10-15

Camcorder, Unpacking . . . . . . . . . . . . .3

CAMERA/OFF/VCR Switch . .5,7,12,19,

. . . . . . . . . . . .26-27,32-34,36,39,41

Car Cord, Optional . . . . . . . . . . . . .15,47

Card, Registration . . . . . . . . . . . . . . . . .i

Care and Maintenance . . . . . . . . . .54-55

Care and Storage, Battery . . . . . . . . . .13

Care and Storage, Cassettes . . . . . . . .17

Cassette Door . . . . . . . . . . . . . . . . . .9,17

Cassette, Inserting and Removing . .6,17

Cassette Tips . . . . . . . . . . . . . . . . . . . .18

Cassettes, Video . . . . . . . . . . . . . . .16-17

Charging the Battery . . . . . . . . . . . . . .11

Chart of Title Characters . . . . . . . . . . .33

Checking Battery Power . . . . . . . . . . .14

Checks and Adjustments . . . . . . . .56-58

Cleaning the Camcorder . . . . . . . . . . .55

Clock Battery, Charging . . . . . . . . . . .27

Color Enhancement Light . . . . . . .42-43

Contents . . . . . . . . . . . . . . . . . . . . . . .1-2

Copying Tapes . . . . . . . . . . . . . . . .38-39

Correcting the Date and Time . . . . . . .26

Customer Assistance .1,3,59,Back Cover

Date and Time Displays . . .24-25,26-27

Date and Time Recording . . . . . . . . . .27

DATE/TIME Button . . . . . . . .8,25,26-27

DC IN 9.6V Jack . . . . . . . . . . . . . . . . . .9

Design Specifications . . . . . . . . . . . . .46

DISPLAY Button . . . . . . .8,24-25,28-29

Edit Search . . . . . . . . . . . . . . . . . . . . .31

EDIT—ADV Button . . . . . . . . . .8,32-34

Electronic Indexing . . . . . . . . . . . . . . .21

Erase Protection . . . . . . . . . . . . . . . . .16

Eyepiece Focus Control . . . . . . . .6,8,22

F.FWD Button . . . . . . .8,19,26,29,31,37

First-Time Operation . . . . . . . . . . . . .3-9

Focus, Auto and Macro . . . . . . . . . . . .20

Handstrap . . . . . . . . . . . . . . . . . . . . . .5,9

INDEX Indicator . . . . . . . . . . . .21,24-25

Indexing, Electronic . . . . . . . . . . . . . .21

Information to User . . . . . . . . . . . . . . .45

Lens Hood . . . . . . . . . . . . . . . . . . . . . . .8

Lens Cap Holder . . . . . . . . . . . . . . . . . .9

Lens Cap, Remove . . . . . . . . . . . . . . . .5

Lens Hood, Removing . . . . . . . . . . .8,49

Lens, Cleaning . . . . . . . . . . . . . . . . . .55

LIGHT AUTO/OFF/ON Switch . . . .8,42

Light Bulb, Replacing . . . . . . . . . . . . .43

Light, Built-in . . . . . . . . . . . . . . .8,42-43

Limited Warranty . . . . . . . . . . . . .60-61

Maintenance and Care . . . . . . . . . .54-55

Memory Stop Feature . . . . . . . . . .28-29

Microphone . . . . . . . . . . . . . . . . . . .8,19

NO TAPE Indicator . . . . . . . . . . . .24-25

Operating Controls, Camcorder . . . . .8-9

Operation, First-Time . . . . . . . . . . . .3-9

Optional Accessories . . . . . . . . . . .46-53

Optional Car Cord . . . . . . . . . . . . .15,47

Order Form, Accessories . . . . . . . .51-53

Index

Picture Search . . . . . . . . . . . . . . . . . . .37

PLAY Button . . . . . . . . .7,8,31,36,39,41

Playback on a TV with

Status Displays . . . . . . . . . . . . . . . . . .24

Stop Action Pause . . . . . . . . . . . . . . . .37

STOP/EJECT Button

AUDIO/VIDEO IN Jacks . . . . .38-39

Playback on a TV

. . . . . . . . . . .6,7,8,17,19,26,29,39,41

Tab, Safety . . . . . . . . . . . . . . . . . . . . .16

Table of Contents . . . . . . . . . . . . . . . .1-2

TAPE END Indicator . . . . . . . . . . .24-25

TAPE Indicator . . . . . . . . . . . . . . .24-25

Tape Copying . . . . . . . . . . . . . . . .38-39

Tape Counter . . . . . . . . . . . . . . . . .24,29

Tape Positioning . . . . . . . . . . . . . . . . .19

Things to Avoid . . . . . . . . . . . . . . . . .54

Tilt Adjustment . . . . . . . . . . . . . . . . . .23

Time and Date Display . . . .24-25,26,27

Time and Date Recording . . . . . . . . . .27

Time Remaining Display . . . . . . . .21,24

Tips, Cassette . . . . . . . . . . . . . . . . . . .18

Tips, Recording . . . . . . . . . . . . . . . . . .35

Tips, Traveling . . . . . . . . . . . . . . . . . .18

Title Select + and – Buttons . . . .8,32-34

Title Select Button . . . . . . . . . . .8,32-34

TITLER Button . . . . . . . . . . . . . .8,32-34

Titler . . . . . . . . . . . . . . . . . . . . . . .32-34

TRACKING (Also Power Zoom)

Buttons . . . . . . . . . . . . . . . . . . .36,37

Traveling Tips . . . . . . . . . . . . . . . . . . .18

Tripod, Using . . . . . . . . . . . . . . . . . . .50

Trouble Checks . . . . . . . . . . . . . . .56-58

Unpacking the Camcorder . . . . . . . . . .3

Using a Tripod . . . . . . . . . . . . . . . . . .50

Using Adapter/Charger . . . . . . . . . . . .10

Using the Rechargeable Battery . .11-14

VIDEO/AUDIO Jacks . . . . . .8,38-39,40

Video Cassettes . . . . . . . . . . . . . . .16-17

Video Light . . . . . . . . . . . . . . . . . .42-43

Viewfinder . . . . . . . . . . .6,8,22-23,36,55

Viewfinder Playback . . . . . . . . . . . . . .36

Viewfinder, Cleaning . . . . . . . . . . . . .55

Warranty, Limited . . . . . . . . . . . . . . . .59

Zoom Buttons . . . . . . . . . . . . . . . . .9,30

Zoom Level Control . . . . . . . . . . . .24,30

Zooming . . . . . . . . . . . . . . . . . . . . . . .30

without Audio/Video Inputs . .40-41

Playback, First . . . . . . . . . . . . . . . . . . . .7

Playback, Viewfinder . . . . . . . . . . . . .36

Plug Adapter, Optional . . . . . . . . . . . .10

Power Zoom Buttons . . . . . . . .24-25,30

Powering Your Camcorder . . . . . .10-15

Problem Solving . . . . . . . . . . . . . .56-58

Product Registration . . . . . . . . . . . . . . .i

ProEdit Features . . . . . . . . . . . . . .31-34

Program AE (Auto Exposure) . . . . . . .20

Quick Review . . . . . . . . . . . . . . . . . . .19

REC Indicator . . . . . . . . . . . . . . . . . .7,24

REC/PAUSE Button .7,9,29,34,37,39,41

Rechargeable Battery . . . . . . . . . . .11-14

Recording Date and Time . . . . . . . . . .27

Recording Speed . . . . . . . . . . . . . . . . .16

Recording Tips . . . . . . . . . . . . . . . . . .35

Recording Titles . . . . . . . . . . . . . . . . .34

Recording, First . . . . . . . . . . . . . . . . . . .7

Registration Card . . . . . . . . . . . . . . . . . .i

Removing Lens Hood . . . . . . . . . . . . .49

Removing the Rechargeable Battery .12

Replacing Bulb of Video Light . . . . . .43

RESET Button . . . . . . . . . . . . . . . . .8,29

REVIEW Button . . . . . . . . . . . . . . . .8,19

REW (Rewind) Button

. . . . . . . . . . . . . . .7,8,19,26,29,31,37

RF DC OUT Jack . . . . . . . . . . . . . . .8,40

RF Output Adapter . . . . . . . . . .40-41,48

Safety Information . . . . . . . . . . . . . . . . .i

Safety Precautions, Battery . . . . . . . . .13

Safety Tab . . . . . . . . . . . . . . . . . . . . . .16

Set the Date and Time . . . . . . . . . . . . .26

Shoulder Strap Attachment Rings . .9,44

Shoulder Strap, Attaching . . . . . . . . . .44

Solving Problems . . . . . . . . . . . . . .56-58

SP (Standard Play) Speed . . . . . . . . . .16

Specifications . . . . . . . . . . . . . . . . . . .46

Need Assistance? We want to help!

U.S. Consumers:

Customer Service . . . . . . . . . . . . . . . . .800-336-1900

Accessories . . . . . . . . . . . . . . . . . . . . .800-338-0376

Canadian Consumers:

English . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0338

French . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0445

Please do not send any products to the

Indianapolis address listed in this manual or

on the carton. This will only add delays in

service for your product.

10330 N Meridian Street

Indianapolis, IN 46290

1996 Thomson Consumer Electronics, Inc.

Trademark(s) Registered

Marca(s) Registrada(s)

Printed in Japan

Part Number 96-CC432-1

QR14435

PYLE Audio PYLE Plus Series plcd46 User Manual
Panasonic VDR M50PP User Manual
Panasonic C9801U User Manual
Omega DPF75 User Manual
Metz Mecablitz 36 AF 3M User Manual
Lochinvar SYNO 13 User Manual
Kramer Electronics Car Video System Cobra R1300A User Manual
Kenwood MD RECIEVER KMD 671R User Manual
Kenwood Car Amplifier TK 931A(D) User Manual
JVC LYT0002 020B User Manual