Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome
MCM2050
EN User manual
FI Käyttöopas
DA Brugervejledning
DE Benutzerhandbuch
EL Zꢀ'ꢁꢂ!ꢃꢄꢂꢅꢆ'!ꢇ#ꢈ"
FR Mode d’emploi
IT Manuale utente
NL Gebruiksaanwijzing
Contents
1
Important
4
4
5
7
Product information
ꢀꢁꢂꢃꢄ\ꢃꢅꢆꢄꢇꢈꢉꢊ
17
17
18
18
19
Know these safety symbols
Hearing Safety
USB playability information
RDS program types
Supported MP3 disc formats
2
Your Micro System
Introduction
6
6
6
7
8
What’s in the box
8
9
Troubleshooting
Notice
20
21
Overview of the main unit
Overview of the remote control
3
Get started
9
9
Placement
Connect FM antenna
Prepare the remote control
Connect power
9
9
10
10
10
11
Set clock
Turn on
Store FM radio stations automatically
4
5
Play
12
12
12
12
13
13
Play disc
Play from USB
Play options
Adjust sound
Display different information
Listen to FM radio
14
14
14
14
14
14
15
Tune to FM radio stations
Program FM radio stations automatically
Program FM radio stations manually
Select a preset radio station
Show RDS information
Select stereo/mono broadcast
6
Other features
16
16
16
16
16
Set the alarm timer
Set the sleep timer
Play from external audio device
Listen through the headphone
EN
3
Know these safety symbols
1 Important
#ꢊ Read these instructions.
#ꢊ Follow all instructions.
#ꢊ Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
#ꢊ Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
ꢅꢚꢁꢙꢄ\ꢂꢓꢉ'ꢊꢆꢖꢅꢆꢊꢁꢓꢇꢔꢕꢃꢂꢊꢖꢂꢅꢆ%ꢊ
#ꢊ Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the unit.
#ꢊ Only use attachments/accessories
ꢉꢁꢂꢃꢄ\ꢂꢔꢊꢛ)ꢊꢆꢖꢂꢊꢚꢅꢈꢕꢘꢅꢃꢆꢕꢓꢂꢓ%
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The ‘exclamation point’ calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
ꢋꢌꢍꢎꢏꢎꢐꢑꢊꢒꢇꢊꢓꢂꢔꢕꢃꢂꢊꢆꢖꢂꢊꢓꢄꢉꢗꢊꢇꢘꢊ\ꢓꢂꢊꢇꢓꢊꢂꢙꢂꢃꢆꢓꢄꢃꢊ
shock, this apparatus should not be exposed to
ꢓꢅꢄꢈꢊꢇꢓꢊꢚꢇꢄꢉꢆꢕꢓꢂꢊꢅꢈꢔꢊꢇꢛꢜꢂꢃꢆꢉꢊ\ꢙꢙꢂꢔꢊ!ꢄꢆꢖꢊꢙꢄ"ꢕꢄꢔꢉ#ꢊ
such as vases, should not be placed on this
apparatus.
CAUTION:To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
#ꢊ Unplug this unit during lightning storms
or when unused for long periods of
time.
#ꢊ ꢍꢂꢘꢂꢓꢊꢅꢙꢙꢊꢉꢂꢓ*ꢄꢃꢄꢈ+ꢊꢆꢇꢊ"ꢕꢅꢙꢄ\ꢂꢔꢊꢉꢂꢓ*ꢄꢃꢂꢊ
ꢁꢂꢓꢉꢇꢈꢈꢂꢙ%ꢊꢀꢂꢓ*ꢄꢃꢄꢈ+ꢊꢄꢉꢊꢓꢂ"ꢕꢄꢓꢂꢔꢊ!ꢖꢂꢈꢊ
the unit has been damaged in any way,
such as power-supply cord or plug is
ꢔꢅꢚꢅ+ꢂꢔ#ꢊꢙꢄ"ꢕꢄꢔꢊꢖꢅꢉꢊꢛꢂꢂꢈꢊꢉꢁꢄꢙꢙꢂꢔꢊꢇꢓꢊ
objects have fallen into the apparatus,
the unit has been exposed to rain or
moisture, does not operate normally,
or has been dropped.
#ꢊ The unit shall not be exposed to
dripping or splashing.
#ꢊ Do not place any sources of danger on
ꢆꢖꢂꢊꢕꢈꢄꢆꢊ;ꢂ%+%ꢊꢙꢄ"ꢕꢄꢔꢊ\ꢙꢙꢂꢔꢊꢇꢛꢜꢂꢃꢆꢉ#ꢊꢙꢄ+ꢖꢆꢂꢔꢊ
ꢃꢅꢈꢔꢙꢂꢉ'%ꢊ
#ꢊ Battery usage CAUTION –To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the remote control:
#ꢊ Install all batteries correctly, + and - as
marked on the remote control.
#ꢊ Do not mix batteries (old and new or
ꢃꢅꢓꢛꢇꢈꢊꢅꢈꢔꢊꢅꢙꢗꢅꢙꢄꢈꢂ#ꢊꢂꢆꢃ%'%
Warning
# Never remove the casing of this apparatus.
# Never lubricate any part of this apparatus.
# Never place this apparatus on other electrical
ꢂ"ꢕꢄꢁꢚꢂꢈꢆ%
# Keep this apparatus away from direct sunlight, naked
]ꢅꢚꢂꢉꢊꢇꢓꢊꢖꢂꢅꢆ%ꢊ
# Never look into the laser beam inside this apparatus.
# Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
#ꢊ Remove batteries when the remote
control is not used for a long time.
#ꢊ Where the plug of the Direct Plug-in
Adapter is used as the disconnect
device, the disconnect device shall
remain readily operable.
4
EN
Hearing Safety
Danger
# To avoid hearing damage, limit the time you use the
headphones at high volume and set the volume to a
safe level.The louder the volume, the shorter is the safe
listening time.
Be sure to observe the following guidelines
when using your headphones.
#ꢊ Listen at reasonable volumes for
reasonable periods of time.
#ꢊ Be careful not to adjust the volume
continuously upwards as your hearing
adapts.
#ꢊ Do not turn up the volume so high that
you can’t hear what’s around you.
#ꢊ You should use caution or temporarily
discontinue use in potentially hazardous
situations.
#ꢊ Excessive sound pressure from earphones
and headphones can cause hearing loss.
Caution
# Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
EN
5
What’s in the box
2 Your Micro
System
Check and identify the contents of your
package:
#ꢊ Main unit
#ꢊ Remote control
Congratulations on your purchase, and
!ꢂꢙꢃꢇꢚꢂꢊꢆꢇꢊ?ꢖꢄꢙꢄꢁꢉ@ꢊꢒꢇꢊꢘꢕꢙꢙ)ꢊꢛꢂꢈꢂ\ꢆꢊꢘꢓꢇꢚꢊꢆꢖꢂꢊ
support that Philips offers, register your product
#ꢊ Power adapter
#ꢊ 1 x MP3 link cable
#ꢊ =ꢇꢕꢈꢆꢄꢈ+ꢊꢗꢄꢆꢊ;>ꢊꢔꢇ!ꢂꢙꢉꢊꢅꢈꢔꢊ>ꢊꢉꢃꢓꢂ!ꢉ'
#ꢊ FM antenna
#ꢊ User manual
#ꢊ Quick start guide
#ꢊ Wall mounting instructions
Introduction
With this unit, you can:
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
bottom of the apparatus.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
#ꢊ enjoy audio from discs, USB devices, and
other external devices
#ꢊ listen to FM radio stations
You can enrich sound output with these sound
effects:
#ꢊ Gꢄ+ꢄꢆꢅꢙꢊꢀꢇꢕꢈꢔꢊJꢇꢈꢆꢓꢇꢙꢊ;GꢀJ'ꢊ
#ꢊ G)ꢈꢅꢚꢄꢃꢊVꢅꢉꢉꢊVꢇꢇꢉꢆꢊ;GVV'ꢊ
The unit supports these media formats:
6
EN
Overview of the main unit
a
b
g
MP 3
-LINK
SOURCE
VOLUME
VOLUME
c
h
i
d
e
f
j
m
n
FM ANT
k
DC IN
2.5A
12
V
l
a
b
c
g MP3-LINK
#ꢊ Connect USB device.
#ꢊ Connect an external audio device.
h
#ꢊ Headphone socket.
#ꢊ Open/close the disc tray.
i VOLUME + / -
#ꢊ Turn the unit on/off.
#ꢊ Switch to standby mode.
#ꢊ Adjust volume.
j
d SOURCE
#ꢊ Select a source: CD, FM, USB, or MP3
LINK.
#ꢊ Stop play or erase a program.
k FM ANT
#ꢊ Improve FM reception.
e
/
l DC IN
#ꢊ Skip to the previous/next track.
#ꢊ Search within a track/disc.
#ꢊ Tune to radio stations.
#ꢊ Adjust time.
#ꢊ Connect power.
m Display panel
#ꢊ Show play information.
f
n Disc tray
#ꢊ Start/pause play.
EN
7
c
d
CD
Overview of the remote
control
#ꢊ Select CD source.
/
#ꢊ Skip to the previous/next track.
#ꢊ Search within a track/disc.
#ꢊ Tune to radio stations.
#ꢊ Adjust time.
a
b
e USB
#ꢊ Select USB source.
f RDS
CD
FM
PRESET/ALBUM
c
d
e
s
r
#ꢊ For selected FM radio stations: display
RDS information.
g
q
#ꢊ Stop play or erase a program.
h VOL +/-
#ꢊ Adjust volume.
MP
3
LINK
i Numeric Keypad 0 - 9
MP
3
USB
#ꢊ Select a track from a disc directly.
#ꢊ Select a preset radio station.
p
o
LINK
j PROG/CLOCK SET
#ꢊ Program tracks.
#ꢊ Program radio stations.
#ꢊ Set time.
RDS
DISPLAY
f
g
h
VOL
k SLEEP/TIMER
#ꢊ Set sleep/alarm timer.
1
4
7
2
5
8
3
6
9
l DSC
i
j
#ꢊ Select a preset sound setting.
m DBB
#ꢊ Turn dynamic bass enhancement on
PROG/
CLOCK SET
REPEAT/
SHUFFLE
or off.
0
n
m
n REPEAT/SHUFFLE
SLEEP/
TIMER
DSC
DBB
k
l
#ꢊ Play a track or all tracks repeatedly.
#ꢊ Play tracks randomly.
o DISPLAY
#ꢊ Show current information.
p MP3 LINK
#ꢊ Select MP3 link source.
q
a
b
#ꢊ Start/pause play.
#ꢊ Turn the unit on/off.
#ꢊ Switch to standby mode.
r
/
#ꢊ Select a preset radio station.
#ꢊ Skip to previous/next album.
#ꢊ Mute/restore sound.
s FM
#ꢊ Select FM tuner source.
8
EN
Prepare the remote control
3 Get started
Caution
# Risk of explosion! Keep batteries away from heat,
ꢉꢕꢈꢉꢖꢄꢈꢂꢊꢇꢓꢊ\ꢓꢂ%ꢊꢎꢂ*ꢂꢓꢊꢔꢄꢉꢃꢅꢓꢔꢊꢛꢅꢆꢆꢂꢓꢄꢂꢉꢊꢄꢈꢊ\ꢓꢂ%
# Risk of decreased battery life! Never mix different
brands or types of batteries.
Caution
# Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
# Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Always follow the instructions in this chapter in
ꢉꢂ"ꢕꢂꢈꢃꢂ%
To install the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
Placement
ꢁꢇꢙꢅꢓꢄꢆ)ꢊ;Z[\'ꢊꢅꢉꢊꢄꢈꢔꢄꢃꢅꢆꢂꢔ%
3 Close the battery compartment.
]ꢇꢕꢊꢃꢅꢈꢊꢁꢙꢅꢃꢂꢊꢆꢖꢂꢊꢕꢈꢄꢆꢊꢇꢈꢊꢅꢊ]ꢅꢆꢊꢉꢕꢓꢘꢅꢃꢂꢊꢇꢓꢊ
mount the unit on a wall.
a
Mount on a wall
See the wall mounting instructions included in
the package.
b
Connect FM antenna
Tip
# For optimal reception, fully extend and adjust the
c
position of the antenna.
Connect the supplied FM antenna to the FM
ANT socket on the main unit.
EN
9
Connect power
3 Press
format.
/
repeatedly to select hour
4 Press CLOCK SETꢊꢆꢇꢊꢃꢇꢈ\ꢓꢚ%
Caution
» The hour digits blink.
# Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
5 Repeat steps 3-4 to set the hour.
6 Repeat steps 3-4 to set the minute.
# Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
7 Repeat steps 3-4 to select whether to
synchronize time of this unit with RDS
stations.
# Before connecting the AC adapter, ensure that you have
completed all other connections.
#ꢊ [NO SYNC CLOCK]: time
synchronization is deactivated.
#ꢊ [SYNC RDS CLOCK]: the unit
synchronizes time from the RDS
stations automatically.
Note
# The type plate is located at the back of the main unit.
Note
Connect the power adapter to:
#ꢊ the DC IN socket on the main unit.
#ꢊ the wall socket.
# The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
# If no button is pressed in 90 seconds, the unit exits
clock setting mode automatically.
Turn on
Press
.
» The unit switches to the last selected
source.
Note
# To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.
Set clock
1 In standby mode, press and hold CLOCK
SET on the remote control for two
seconds.
Switch to standby mode
Press again to switch the unit to standby
mode.
» [SET CLOCK] ;ꢉꢂꢆꢊꢃꢙꢇꢃꢗ'ꢊꢉꢃꢓꢇꢙꢙꢉꢊꢇꢈꢊ
the display.
» ꢒꢖꢂꢊꢃꢙꢇꢃꢗꢊ;ꢄꢘꢊꢉꢂꢆ'ꢊꢅꢁꢁꢂꢅꢓꢉꢊꢇꢈꢊꢆꢖꢂꢊ
display panel.
2 Press CLOCK SET again.
» The 12/24 hour format blinks.
10 EN
Store FM radio stations
automatically
When the unit turns to FM tuner mode, and
no radio stations are stored, [AUTO INSTALL
- PRESS PLAY, STOP CANCEL] (to auto install,
press
; to cancel, press ꢊ'ꢊꢄꢉꢊꢔꢄꢉꢁꢙꢅ)ꢂꢔ%
Press and hold
scan.
for 3 seconds to start full
» The unit automatically stores FM radio
ꢉꢆꢅꢆꢄꢇꢈꢉꢊ!ꢄꢆꢖꢊꢉꢕꢘ\ꢃꢄꢂꢈꢆꢊꢉꢄ+ꢈꢅꢙꢊꢉꢆꢓꢂꢈ+ꢆꢖꢊ
ꢅꢈꢔꢊꢆꢖꢂꢈꢊꢛꢓꢇꢅꢔꢃꢅꢉꢆꢉꢊꢆꢖꢂꢊ\ꢓꢉꢆꢊꢁꢓꢂꢉꢂꢆꢊ
station.
Tip
# To exit storing mode, press or
.
EN 11
Play options
4 Play
Pause/resume play
During play, press
to pause/resume play.
Play disc
1 Press to open the disc compartment.
2 Insert a disc with the printed side facing up.
3 Press to close the disc compartment.
ꢉꢊꢋꢊꢌꢍꢎꢏꢐꢑꢒ]ꢊꢆꢋꢓꢌꢔ
1 During play, press REPEAT/SHUFFLE
repeatedly to select:
4 Press CD on the remote control to select
#ꢊ
#ꢊ
#ꢊ
: play the current track repeatedly.
: play all tracks repeatedly.
ꢊ;ꢘꢇꢓꢊ=?`[ꢋ=ꢌꢊꢇꢈꢙ)'ꢑꢊꢁꢙꢅ)ꢊꢅꢙꢙꢊ
tracks in this album repeatedly.
: play all tracks randomly.
the disc source.
» [Reading]ꢊ;ꢓꢂꢅꢔꢄꢈ+'ꢊꢛꢙꢄꢈꢗꢉꢊꢘꢇꢓꢊꢅꢊ
moment, then CD starts playing
automatically. If not, press
.
#ꢊ
2 To resume normal play, press REPEAT/
SHUFFLE repeatedly until the above icon
disappears.
Play from USB
Skip to a track
Note
For CD:
# Make sure that the USB device contains playable audio
Press
/
to select another track.
content.
For MP3 disc and USB:
1 Press
/
to select an album or a folder.
ꢊꢆꢇꢊꢉꢂꢙꢂꢃꢆꢊꢅꢊꢆꢓꢅꢃꢗ[\ꢙꢂ%
1 Insert the USB device into the
socket.
2 Press
/
Tip
# To select a track directly, you can also press a key on
the numerical keypad.
Search within a track
1 During play, press and hold
/
.
2 Release to resume normal play.
Program tracks
2 Press USB on the remote control to select
You can program a maximum of 20 tracks.
the USB source.
1 In CD/USB mode, press to stop
playback, then press PROG to activate the
programming mode.
» ꢒꢖꢂꢊ\ꢙꢂꢉꢊꢁꢙꢅ)ꢊꢅꢕꢆꢇꢚꢅꢆꢄꢃꢅꢙꢙ)%ꢊꢏꢘꢊꢈꢇꢆ#ꢊꢁꢓꢂꢉꢉꢊ
.
» [PROG{ꢊ;ꢁꢓꢇ+ꢓꢅꢚ'ꢊꢄꢉꢊꢔꢄꢉꢁꢙꢅ)ꢂꢔ%
12 EN
2 For MP3/WMA tracks, press
/
to
select an album.
3 Press
/
to select a track, then press
PROGꢊꢆꢇꢊꢃꢇꢈ\ꢓꢚ%
4 Repeat steps 2 to 3 to program more
tracks.
5 Press
to play the programmed tracks.
» During play, [PROG{ꢊ;ꢁꢓꢇ+ꢓꢅꢚ'ꢊꢄꢉꢊ
displayed.
#ꢊ To erase the program, when playback
is stopped, press
.
Adjust sound
During play, you can adjust volume and select
sound effects.
Function
To increase/decrease volume
Action
Press VOL
+/-.
To mute/restore sound
To turn dynamic bass
enhancement on/off
To select a sound effect:
[POP{ꢊ;ꢁꢇꢁ'
Press
Press DBB.
.
Press DSC
repeatedly.
[JAZZ{ꢊ;ꢜꢅ||'
[CLASSIC{ꢊ;ꢃꢙꢅꢉꢉꢄꢃ'
[ROCK{ꢊ;ꢓꢇꢃꢗ'
[FLAT{ꢊ;]ꢅꢆ'
Display different information
During play, press DISPLAY repeatedly to view
time and different play information.
EN 13
Program FM radio stations
manually
5 Listen to FM
radio
1 In tuner mode, tune to an FM radio station.
2 Press PROG to activate programming
mode.
Tune to FM radio stations
» [PROG] ;ꢁꢓꢇ+ꢓꢅꢚ'ꢊꢛꢙꢄꢈꢗꢉ%
3 Press
/
repeatedly to select a channel
Note
number.
# Position the antenna as far as possible fromTV,VCR, or
other radiation source.
4 Press PROGꢊꢅ+ꢅꢄꢈꢊꢆꢇꢊꢃꢇꢈ\ꢓꢚ%
# Ensure that you have connected and fully extended the
5 Repeat steps 1-4 to store other FM
supplied FM antenna.
stations.
1 Press FM to select FM tuner mode.
Note
2 Press and hold
/
for 3 seconds.
# To remove a pre-stored station, store another station
» [SEARCH] ;ꢉꢂꢅꢓꢃꢖ'ꢊꢄꢉꢊꢔꢄꢉꢁꢙꢅ)ꢂꢔ%
in its place.
» The unit tunes to an FM station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
Select a preset radio station
Press
/
ꢊꢓꢂꢁꢂꢅꢆꢂꢔꢙ)ꢊꢕꢈꢆꢄꢙꢊ)ꢇꢕꢊ\ꢈꢔꢊꢇꢁꢆꢄꢚꢅꢙꢊ
reception.
In tuner mode, press
/
or the numeric
buttons to select a preset number.
Program FM radio stations
automatically
Show RDS information
ꢍGꢀꢊ;ꢍꢅꢔꢄꢇꢊGꢅꢆꢅꢊꢀ)ꢉꢆꢂꢚ'ꢊꢄꢉꢊꢅꢊꢉꢂꢓ*ꢄꢃꢂꢊ
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon is displayed.
Note
# You can program a maximum of 20 preset FM radio
stations.
1 Tune to an RDS station.
In FM tuner mode, press and hold PROG for 3
seconds.
2 Press RDS repeatedly to scroll through the
ꢘꢇꢙꢙꢇ!ꢄꢈ+ꢊꢄꢈꢘꢇꢓꢚꢅꢆꢄꢇꢈꢊ;ꢄꢘꢊꢅ*ꢅꢄꢙꢅꢛꢙꢂ'ꢑ
» Program service
» [AUTO] ;ꢅꢕꢆꢇ'ꢊꢄꢉꢊꢔꢄꢉꢁꢙꢅ)ꢂꢔ%
» The unit stores all the FM radio
stations automatically and then
ꢛꢓꢇꢅꢔꢃꢅꢉꢆꢉꢊꢆꢖꢂꢊ\ꢓꢉꢆꢊꢁꢓꢂꢉꢂꢆꢊꢓꢅꢔꢄꢇꢊ
station.
» Program type such as [NEWS]ꢊ;ꢈꢂ!ꢉ'#ꢊ
[SPORT]ꢊ;ꢉꢁꢇꢓꢆ'#ꢊ[POP M] (pop
ꢚꢕꢉꢄꢃ'%%%
» Radio text message
» Time
14 EN
Select stereo/mono broadcast
Note
# Stereo broadcast is the default setting for tuner mode.
# For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press
mono and stereo broadcast.
to switch between
EN 15
Set the sleep timer
6 Other features
Note
Set the alarm timer
# Make sure that you have set the clock correctly.
This unit can be used as an alarm timer.You can
select disc, FM tuner, or USB as alarm source.
When the unit is turned on, press SLEEP
repeatedly to select the sleep timer period (in
ꢚꢄꢈꢕꢆꢂꢉ'%
Note
» When sleep timer is activated, is
displayed.
# Make sure that you have set the clock correctly.
Tip
1 In standby mode, press and hold TIMER
until [SETTIMER]ꢊ;ꢉꢂꢆꢊꢆꢄꢚꢂꢓ'ꢊꢉꢃꢓꢇꢙꢙꢉꢊꢇꢈꢊꢆꢖꢂꢊ
display.
# To deactivate the sleep timer, press SLEEP repeatedly
until [OFF]ꢊ;ꢇꢘꢘ'ꢊꢄꢉꢊꢔꢄꢉꢁꢙꢅ)ꢂꢔ%
2 Press TIMER.
» [SELECT SOURCE]ꢊ;ꢉꢂꢙꢂꢃꢆꢊꢉꢇꢕꢓꢃꢂ'ꢊ
scrolls on the display.
3 Press SOURCE repeatedly or the source
selection buttons on the remote control to
select a source: disc, FM tuner, or USB.
Play from external audio
device
4 Press TIMERꢊꢆꢇꢊꢃꢇꢈ\ꢓꢚ%
With this unit, you can play audio from an
external audio device like MP3 player.
» The hour digits blink.
5 Press
/
repeatedly to set the hour.
1 Connect the supplied MP3 Link cable to
6 Press TIMERꢊꢆꢇꢊꢃꢇꢈ\ꢓꢚ%
#ꢊ the MP3-LINK socket.
» The minute digits blink.
#ꢊ the audio output socket of an external
device.
7 Repeat steps 5-6 to set the minute.
2 Press USB/MP3 LINK repeatedly to select
MP3 link mode.
Note
3 Start to play the external device (see the
# If no button is pressed in 90 seconds, the unit exits
ꢔꢂ*ꢄꢃꢂSꢉꢊꢕꢉꢂꢓꢊꢚꢅꢈꢕꢅꢙ'%ꢊ
timer setting mode automatically.
To activate or deactivate the alarm timer
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
Listen through the headphone
Plug a headphone into the socket on the unit.
»
appears when the timer is activated.
Tip
# If CD/USB source is selected, but no disc is inserted
or no USB connected, the unit switches to the tuner
source automatically.
16 EN
Tuner (FM)
Tuning range
Tuning grid
Sensitivity
7 Product
information
87.5 - 108 MHz
50 KHz
- Mono, 26dB S/N Ratio
<22 dBf
- Stereo, 46dB S/N Ratio >43 dBf
Note
Search selectivity
>28 dBf
Total harmonic distortion <3%
# Product information is subject to change without prior
notice.
Signal to noise ratio
Number of presets
>50 dB
20
ꢕꢋꢊꢖꢗ\ꢖꢌꢍꢗ"#ꢏ
General information
AC power
Model:AS300-120-
AE250;
$%ꢋꢓꢗ\ꢊ&
Input: 100 - 240V ~,
50/60 Hz, 1.1 A;
Output: 12.0V
2.5 A
Rated Output
2 X 10 W RMS
80 Hz - 16 kHz, 3 dB
1ŒꢊꢔV
Power
Šꢓꢂ"ꢕꢂꢈꢃ)ꢊ
Response
Signal to Noise
Ratio
Operation Power
Consumption
Standby Power
Consumption
Dimensions
15 W
0„ꢊꢋ
MP3 Link Input
0.5V RMS 20 kohm
\ꢊ=ꢅꢄꢈꢊ†ꢈꢄꢆꢊ;ꢋꢊ‡ꢊˆꢊ‡ꢊG' 400 x 235 x 98 mm
Disc
LaserType
Disc Diameter
Support Disc
Weight
- With Packing
- Main Unit
Semiconductor
12 cm/8 cm
CD-DA, CD-R, CD-RW,
MP3-CD,WMA-CD
24 Bits/44.1 kHz
Ž„%‘ꢊ’ꢊ;„ꢊꢗˆ|'
3.7 kg
2.1 kg
Audio DAC
Total Harmonic
Distortion
Šꢓꢂ"ꢕꢂꢈꢃ)ꢊꢍꢂꢉꢁꢇꢈꢉꢂ 60 Hz - 16 kHz
S/N Ratio >55 dBA
EN 17
USB playability information
RDS program types
NOTYPE
No RDS programme
Compatible USB devices:
type
#ꢊ †ꢀVꢊ]ꢅꢉꢖꢊꢚꢂꢚꢇꢓ)ꢊ;†ꢀV„%„'
#ꢊ †ꢀVꢊ]ꢅꢉꢖꢊꢁꢙꢅ)ꢂꢓꢉꢊ;†ꢀV„%„'
#ꢊ ꢚꢂꢚꢇꢓ)ꢊꢃꢅꢓꢔꢉꢊ;ꢓꢂ"ꢕꢄꢓꢂꢉꢊꢅꢈꢊꢅꢔꢔꢄꢆꢄꢇꢈꢅꢙꢊ
ꢃꢅꢓꢔꢊꢓꢂꢅꢔꢂꢓꢊꢆꢇꢊ!ꢇꢓꢗꢊ!ꢄꢆꢖꢊꢆꢖꢄꢉꢊꢕꢈꢄꢆ'
Supported formats:
NEWS
AFFAIRS
INFO
News services
Politics and current affairs
Special information
programs
Sports
Education and advanced
training
Radio plays and literature
Culture, religion and
society
Science
Entertainment programs
Pop music
Rock music
Light music
Light classical music
Classical music
Special music programs
Weather
#ꢊ †ꢀVꢊꢇꢓꢊꢚꢂꢚꢇꢓ)ꢊ\ꢙꢂꢊꢘꢇꢓꢚꢅꢆꢑꢊŠꢌꢒ„>#ꢊ
Šꢌꢒ„Œ#ꢊŠꢌꢒ`>ꢊ;ꢉꢂꢃꢆꢇꢓꢊꢉꢄ|ꢂꢑꢊ‘„>ꢊꢛ)ꢆꢂꢉ'
#ꢊ =?`ꢊꢛꢄꢆꢊꢓꢅꢆꢂꢊ;ꢔꢅꢆꢅꢊꢓꢅꢆꢂ'ꢑꢊ`>\`>ꢊ–ꢛꢁꢉꢊ
and variable bit rate
#ꢊ WMA v9 or earlier
#ꢊ Directory nesting up to a maximum
of 8 levels
#ꢊ Number of albums/ folders: maximum
99
#ꢊ Number of tracks/titles: maximum 999
#ꢊ ID3 tag v2.0 or later
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
MOR M
#ꢊ File name in Unicode UTF8
;ꢚꢅ‡ꢄꢚꢕꢚꢊꢙꢂꢈ+ꢆꢖꢑꢊ„Œꢊꢛ)ꢆꢂꢉ'
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
Unsupported formats:
#ꢊ Empty albums: an empty album is an
album that does not contain MP3/
ꢋ=ꢌꢊ\ꢙꢂꢉ#ꢊꢅꢈꢔꢊꢄꢉꢊꢈꢇꢆꢊꢛꢂꢊꢉꢖꢇ!ꢈꢊꢄꢈꢊꢆꢖꢂꢊ
display.
Finance
Children’s programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
#ꢊ †ꢈꢉꢕꢁꢁꢇꢓꢆꢂꢔꢊ\ꢙꢂꢊꢘꢇꢓꢚꢅꢆꢉꢊꢅꢓꢂꢊꢉꢗꢄꢁꢁꢂꢔ%ꢊ
Šꢇꢓꢊꢂ‡ꢅꢚꢁꢙꢂ#ꢊꢋꢇꢓꢔꢊꢔꢇꢃꢕꢚꢂꢈꢆꢉꢊ;%ꢔꢇꢃ'ꢊ
ꢇꢓꢊ=?`ꢊ\ꢙꢂꢉꢊ!ꢄꢆꢖꢊꢂ‡ꢆꢂꢈꢉꢄꢇꢈꢊ%ꢔꢙꢘꢊꢅꢓꢂꢊ
ignored and not played.
#ꢊ ꢌꢌJ#ꢊꢋꢌ—#ꢊ?J=ꢊꢅꢕꢔꢄꢇꢊ\ꢙꢂꢉ
#ꢊ Gꢍ=ꢊꢁꢓꢇꢆꢂꢃꢆꢂꢔꢊꢋ=ꢌꢊ\ꢙꢂꢉꢊ;%!ꢅ*#ꢊ
%ꢚ˜ꢅ#ꢊ%ꢚ˜ꢁ#ꢊ%ꢚꢁ˜#ꢊ%ꢅꢅꢃ'
#ꢊ ꢋ=ꢌꢊ\ꢙꢂꢉꢊꢄꢈꢊ™ꢇꢉꢉꢙꢂꢉꢉꢊꢘꢇꢓꢚꢅꢆ
FOLK M
DOCUMENT
TES
Documentary
AlarmTest
ALARM
Alarm
18 EN
Supported MP3 disc formats
#ꢊ ISO9660, Joliet
#ꢊ Maximum title number: 999 (depending on
\ꢙꢂꢊꢈꢅꢚꢂꢊꢙꢂꢈ+ꢆꢖ'
#ꢊ Maximum album number: 99
#ꢊ ꢀꢕꢁꢁꢇꢓꢆꢂꢔꢊꢉꢅꢚꢁꢙꢄꢈ+ꢊꢘꢓꢂ"ꢕꢂꢈꢃꢄꢂꢉꢑꢊ`>ꢊꢗˆ|#ꢊ
44.1 kHz, 48 kHz
#ꢊ ꢀꢕꢁꢁꢇꢓꢆꢂꢔꢊVꢄꢆ\ꢓꢅꢆꢂꢉꢑꢊ`>š`>ꢊ;ꢗꢛꢁꢉ'#ꢊ
variable bit rates
EN 19
No disc detected
8 Troubleshooting
#
#
#
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
Warning
#
#
Replace or clean the disc.
# Never remove the casing of this apparatus.
†ꢉꢂꢊꢅꢊ\ꢈꢅꢙꢄ|ꢂꢔꢊJGꢊꢇꢓꢊꢃꢇꢓꢓꢂꢃꢆꢊꢘꢇꢓꢚꢅꢆꢊꢔꢄꢉꢃ%
*ꢌ##"ꢍꢆ;ꢗꢏꢋꢓꢌꢔꢆꢏ"%ꢊꢆ\ꢓꢊꢏꢆꢗ#ꢆ<ꢕ=ꢆ;ꢊ>ꢗꢖꢊ
#
ꢒꢖꢂꢊꢈꢕꢚꢛꢂꢓꢊꢇꢘꢊꢘꢇꢙꢔꢂꢓꢉꢊꢇꢓꢊ\ꢙꢂꢉꢊꢄꢈꢊꢆꢖꢂꢊ†ꢀVꢊ
device has exceeded a certain limit.This
phenomenon is not a malfunction.
ꢒꢖꢂꢊꢘꢇꢓꢚꢅꢆꢉꢊꢇꢘꢊꢆꢖꢂꢉꢂꢊ\ꢙꢂꢉꢊꢅꢓꢂꢊꢈꢇꢆꢊ
supported.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
ꢓꢂ"ꢕꢂꢉꢆꢄꢈ+ꢊꢉꢂꢓ*ꢄꢃꢂ%ꢊꢏꢘꢊꢆꢖꢂꢊꢁꢓꢇꢛꢙꢂꢚꢊꢓꢂꢚꢅꢄꢈꢉꢊ
unsolved, go to the Philips web site (www.
ꢁꢖꢄꢙꢄꢁꢉ%ꢃꢇꢚ[!ꢂꢙꢃꢇꢚꢂ'%ꢊꢋꢖꢂꢈꢊ)ꢇꢕꢊꢃꢇꢈꢆꢅꢃꢆꢊ
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
#
USB device not supported
#
The USB device is incompatible with the
unit.Try another one.
Poor radio reception
#
Increase the distance between the unit and
yourTV orVCR.
Fully extend the FM antenna.
No power
#
#
#
#
Ensure that the AC power cord of the unit
is connected properly.
Ensure that there is power at the AC
outlet.
As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
Timer does not work
#
#
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
#
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
#
No sound or poor sound
#
#
Adjust the volume.
Disconnect the headphones.
No response from the unit
#
Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
#
Vꢂꢘꢇꢓꢂꢊ)ꢇꢕꢊꢁꢓꢂꢉꢉꢊꢅꢈ)ꢊꢘꢕꢈꢃꢆꢄꢇꢈꢊꢛꢕꢆꢆꢇꢈ#ꢊ\ꢓꢉꢆꢊ
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities
;Z[Nꢊꢉꢄ+ꢈꢉ'ꢊꢅꢙꢄ+ꢈꢂꢔꢊꢅꢉꢊꢄꢈꢔꢄꢃꢅꢆꢂꢔ%
Replace the battery.
#
#
#
#
Aim the remote control directly at the
sensor on the front of the unit.
20 EN
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
ꢈꢂ+ꢅꢆꢄ*ꢂꢊꢃꢇꢈꢉꢂ"ꢕꢂꢈꢃꢂꢉꢊꢘꢇꢓꢊꢆꢖꢂꢊꢂꢈ*ꢄꢓꢇꢈꢚꢂꢈꢆꢅꢙꢊ
and human health.
9 Notice
ꢌꢈ)ꢊꢃꢖꢅꢈ+ꢂꢉꢊꢇꢓꢊꢚꢇꢔꢄ\ꢃꢅꢆꢄꢇꢈꢉꢊꢚꢅꢔꢂꢊꢆꢇꢊꢆꢖꢄꢉꢊ
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
ꢅꢕꢆꢖꢇꢓꢄꢆ)ꢊꢆꢇꢊꢇꢁꢂꢓꢅꢆꢂꢊꢆꢖꢂꢊꢂ"ꢕꢄꢁꢚꢂꢈꢆ%
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
ꢉꢂꢁꢅꢓꢅꢆꢂꢊꢄꢈꢆꢇꢊꢆꢖꢓꢂꢂꢊꢚꢅꢆꢂꢓꢄꢅꢙꢉꢑꢊꢃꢅꢓꢔꢛꢇꢅꢓꢔꢊ;ꢛꢇ‡'#ꢊ
ꢁꢇꢙ)ꢉꢆ)ꢓꢂꢈꢂꢊꢘꢇꢅꢚꢊ;ꢛꢕꢘꢘꢂꢓ'ꢊꢅꢈꢔꢊꢁꢇꢙ)ꢂꢆꢖ)ꢙꢂꢈꢂꢊ
;ꢛꢅ+ꢉ#ꢊꢁꢓꢇꢆꢂꢃꢆꢄ*ꢂꢊꢘꢇꢅꢚꢊꢉꢖꢂꢂꢆ%'ꢊ
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
ꢂ"ꢕꢄꢁꢚꢂꢈꢆ%
This product complies with the radio
ꢄꢈꢆꢂꢓꢘꢂꢓꢂꢈꢃꢂꢊꢓꢂ"ꢕꢄꢓꢂꢚꢂꢈꢆꢉꢊꢇꢘꢊꢆꢖꢂꢊœꢕꢓꢇꢁꢂꢅꢈꢊ
Community.
ꢒꢖꢄꢉꢊꢁꢓꢇꢔꢕꢃꢆꢊꢃꢇꢚꢁꢙꢄꢂꢉꢊ!ꢄꢆꢖꢊꢆꢖꢂꢊꢓꢂ"ꢕꢄꢓꢂꢚꢂꢈꢆꢉꢊ
of the following directives and guidelines:
2004/108/EC + 2006/95/EC
Your product is designed and manufactured
!ꢄꢆꢖꢊꢖꢄ+ꢖꢊ"ꢕꢅꢙꢄꢆ)ꢊꢚꢅꢆꢂꢓꢄꢅꢙꢉꢊꢅꢈꢔꢊꢃꢇꢚꢁꢇꢈꢂꢈꢆꢉ#ꢊ
which can be recycled and reused.
The making of unauthorized copies of copy-
protected material, including computer
ꢁꢓꢇ+ꢓꢅꢚꢉ#ꢊ\ꢙꢂꢉ#ꢊꢛꢓꢇꢅꢔꢃꢅꢉꢆꢉꢊꢅꢈꢔꢊꢉꢇꢕꢈꢔꢊ
recordings, may be an infringement of
copyrights and constitute a criminal offence.
ꢒꢖꢄꢉꢊꢂ"ꢕꢄꢁꢚꢂꢈꢆꢊꢉꢖꢇꢕꢙꢔꢊꢈꢇꢆꢊꢛꢂꢊꢕꢉꢂꢔꢊꢘꢇꢓꢊꢉꢕꢃꢖꢊ
purposes.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
This apparatus includes this label:
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
ꢈꢂ+ꢅꢆꢄ*ꢂꢊꢃꢇꢈꢉꢂ"ꢕꢂꢈꢃꢂꢉꢊꢘꢇꢓꢊꢆꢖꢂꢊꢂꢈ*ꢄꢓꢇꢈꢚꢂꢈꢆꢊꢅꢈꢔꢊ
human health.
Norge
ꢒ)ꢁꢂꢉꢗꢄꢙꢆꢊ\ꢈꢈꢂꢉꢊꢁꢝꢊꢅꢁꢁꢅꢓꢅꢆꢂꢈꢉꢊꢕꢈꢔꢂꢓꢉꢄꢔꢂ%
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke frakoplet
nettet så lenge apparatet er tilsluttet
nettkontakten.
Šꢇꢓꢊꢝꢊꢓꢂꢔꢕꢉꢂꢓꢂꢊꢘꢅꢓꢂꢈꢊꢘꢇꢓꢊꢛꢓꢅꢈꢈꢊꢂꢙꢙꢂꢓꢊꢂꢙꢂꢗꢆꢓꢄꢉꢗꢊꢉꢆ=ꢆ#ꢊ
skal apparatet ikke utsettes for regn eller fuktighet.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
EN 21
22
NL 171
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
MCM2050_12_UM_V1.1
|