Philips CEM220 User Manual

Register your product and get support at:  
Car Entertainment System  
CEM220  
EN  
User manual  
ZH-HK Ԛ͂ʹ˫  
ZH-CN
߀
൱Ҭ  
1 Important  
Notice  
Safety  
Read and understand all instructions  
before you use your apparatus. If damage is  
caused by failure to follow instructions, the  
warranty does not apply.  
The making of unauthorized copies of copy-  
protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
This apparatus is designed for negative  
ground (earth) 12V DC operation only.  
To ensure safe driving, adjust the volume to  
a safe and comfortable level.  
Improper fuses can cause damage or  
fire.When you need to change the fuse,  
consult a professional.  
This apparatus includes these labels:  
Use only the supplied mounting hardware  
for a safe and secure installation.  
To avoid short circuit, do not expose the  
apparatus to rain or water.  
Never insert objects into the ventilation  
slots or other openings on the apparatus.  
Clean the apparatus and frame with a soft,  
damp cloth. Never use substances such as  
alcohol, chemicals or household cleaners  
on the apparatus.  
Class II equipment symbol  
Never place any objects other than discs  
into the apparatus.  
Never use solvents such as benzene,  
thinner, cleaners available commercially, or  
anti-static sprays intended for discs.  
Visible and invisible laser radiation when  
open.Avoid exposure to beam.  
This symbol indicates that the apparatus has a  
double insulation system.  
Recycling  
Risk of damage to the apparatus screen!  
Never touch, push, rub or strike the screen  
with any object.  
Caution  
Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure or other unsafe operation.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
2
EN  
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products.The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot  
be disposed of with normal household waste.  
Please inform yourself about the local rules on  
separate collection of batteries.The correct  
disposal of batteries helps prevent potentially  
negative consequences on the environment and  
human health.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
2009 © Koninklijke Philips Electronics N.V.All  
rights reserved.  
Specifications are subject to change without  
notice.Trademarks are the property of  
Koninklijke Philips Electronics N.V. or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
EN  
3
2 Your car audio  
system  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
a
b
Introduction  
c
f
d
e
g
With the in-car audio system, you can enjoy  
your drive while you listen to:  
FM or AM (MW) radio  
Audio from CD or MP3 disc  
Audio from a USB drive  
Audio from a SD/MMC card  
Audio from external devices  
What’s in the box  
h
i
j
Check and identify the contents of your  
package:  
a In-car audio system  
b Rubber cushion  
c Screw (4 pieces)  
d Disassembly tool ( 2 pieces)  
e Front panel  
f Trim plate  
g Carrying case for front panel  
h User manual  
i Quick start guide  
j Standard connector  
4
EN  
Overview of the main unit  
a
b c d  
e
f
g
h i  
s
r
q
p o n m l k j  
x w v  
u
t
Enter characters for search.  
Mute or restore volume.  
a
Select tuner band.  
Select MP3/WMA folder.  
Scroll up or down menu.  
e MENU / DISP  
Display radio frequency, clock and  
radio program type (if available).  
Display track, elapsed time, artist,  
album, title, folder, file and clock.  
Access system menu.  
b DBB  
Turn on or off Dynamic Bass Boost  
(DBB) sound.  
c SOURCE  
f
Select audio source.  
Return to previous menu.  
Stop search.  
Disable screen blackout.  
d
/MUTE  
Turn the unit on or off.  
Adjust volume.  
Confirm selection.  
g Display panel  
EN  
5
h
Unlock the panel  
i USB socket  
j External device socket  
k 6  
Select preset station no. 6  
l 5  
Select preset station no. 5  
m SHUF, 4  
Activate or deactivate shuffle mode.  
Select preset station no. 4  
n 3, REP  
Set repeat play mode.  
Select preset station no. 3  
o INTRO, 2  
Turn intro play on or off.  
Select preset station no. 2  
p 1,  
Start play  
Pause or resume play.  
Select preset station no. 1  
q
/
Tune to a radio station  
Skip/search for a track.  
r EQ/Audio  
Select equalizer (EQ) setting.  
Access audio setting menu.  
s SEARCH  
Store radio stations automatically.  
Search a track or folder.  
t Panel power connection  
u Disc slot  
v
Take disc out.  
w RESET  
Restore default settings  
x SD/MMC card slot  
6
EN  
Note on the power supply lead (yellow)  
3 Get started  
When you connect other devices to this  
apparatus, ensure that the rating of the car  
circuit is higher than the total fuse value of  
all the connected devices.  
Caution  
Notes on speaker connection  
Use the controls only as stated in this user manual.  
Never connect speaker wires to the metal  
body or chassis of the car.  
Never connect speaker wires with stripes  
to one another.  
Always follow the instructions in this chapter in  
sequence.  
If you contact Philips, you will be asked for the  
model and serial number of your apparatus.The  
model number and serial number are on the  
bottom of your apparatus.Write the numbers  
here:  
Overview of parts  
These are the supplied parts needed to  
connect and install this unit.  
Model No. __________________________  
Serial No. ___________________________  
a In-car audio system  
b Sleeve  
c Front panel  
Install the car audio  
d Trim plate  
e Rubber cushion  
f Disassembly tools  
g Screws (4 pieces)  
h ISO connector  
These instructions are for a typical installation.  
However, if your car has different requirements,  
make the corresponding adjustment. If you have  
any questions regarding installation kits, consult  
your Philips car audio dealer.  
Caution  
a
b
This unit is designed for negative ground (earth) 12V DC  
operation only.  
Always install this unit in the car dashboard. Other  
locations can be dangerous as the rear of the unit heats  
up during use.  
To avoid short-circuit: before you connect, ensure that  
the ignition is off.  
c
e
d
h
Ensure that you connect the yellow and red power  
supply leads after all other leads are connected.  
Ensure that all loose leads are insulated with electrical  
tape.  
Ensure that the leads do not get caught under screws  
orin parts that will move (e.g. seat rail).  
Ensure that all ground (earth) leads are run to a common  
ground (earth) point.  
f
g
Use only the supplied mounting hardware for a safe and  
secure installation.  
Improper fuses can cause damage or fire.When you  
need to change the fuse, consult a professional.  
EN  
7
Connection: for cars with ISO  
connectors  
3 Connect the antenna and amplifier as  
illustrated, if applicable.  
Caution  
Ensure that all loose leads are insulated with electrical  
tape.  
A1 A2 A3 A4 A5 A6 A7 A8  
B1 B2 B3 B4 B5 B6 B7 B8  
A
B
1 Pull out the ISO connectors from car  
dashboard and connect them to the bigger  
end of the supplied standard connector.  
A
a
b
c
d
2 Connect the other end of the supplied  
standard connector to the unit.  
Connector  
Connect to  
1
2
3
4
REAR LINE OUT R Rear right speaker  
REAR LINE OUT L Rear left speaker  
SUB OUT  
Subwoofer  
Antenna  
ANTENNA  
Connection: for cars without ISO  
connectors  
Caution  
Be sure to connect the black ground (earth) lead first.  
8
EN  
1 Connect the antenna and amplifier as  
illustrated, if applicable.  
B
a
a
a
b
A1 A2 A3 A4 A5 A6 A7 A8  
B1 B2 B3 B4 B5 B6 B7 B8  
b
A
B
c
d
a
b
b
c
d
A
e
c
c
d
f
g
h
i
d
a
b
c
d
1
2
3
4
Green/black strip Left speaker (Rear)  
White/black strip Left speaker (Front)  
Gray/black strip Right speaker (Front)  
Purple/black strip Right speaker (Rear)  
Connector  
Connect to  
1
2
3
4
REAR LINE OUT R Rear right speaker  
REAR LINE OUT L Rear left speaker  
SUB OUT  
Subwoofer  
Antenna  
ANTENNA  
e
f
RED  
Ignition key +12V DC  
when ON/ACC  
BLUE  
Motor/electric antenna  
relay control lead/Amplifier  
relay control lead  
2 Cut off the bigger end of the supplied  
standard connector.  
3 Check the car’s wiring carefully and  
connect them to the supplied standard  
connector.  
g
h
i
BLACK  
PINK  
Ground  
Illumination switch  
YELLOW To the +12V car battery  
which is energized at all  
times  
EN  
9
4 Connect the supplied standard connector  
to the unit.  
4 Ensure that car dashboard opening is  
within these measurements:  
Mount in the dashboard  
5mm  
1 If the car does not have an on-board drive  
or navigation computer, disconnect the  
negative terminal of the car battery.  
If you disconnect the car battery in  
a car that has an on-board drive or  
navigation computer, the computer  
may lose its memory.  
1
83 mm  
If the car battery is not disconnected,  
to avoid short-circuit, ensure that bare  
wires do not touch each other.  
53mm  
2 Remove the two screws on the top of the  
unit.  
3 Remove the mounting sleeve with the  
supplied disassembly tools.  
10 EN  
Attach the front panel  
5 Install the sleeve into the dashboard and  
bend the tabs outward to fix the sleeve.  
1 Attach the trim plate.  
Note  
Skip this step if the unit is not fixed by sleeve but by  
supplied screws.  
5mm  
2 Insert the right side of the panel in the  
chassis until it is correctly engaged.  
6 Place the supplied rubber cushion over the  
end of the mounting bolt.  
3 Press the left side of the panel and point  
the left hole at the left pillar.  
4 Release the panel to engage the left side.  
Turn on  
1 Press to turn on the unit.  
To turn off the unit,press for 3 seconds.  
Set clock  
7 Slide the unit into the dashboard until you  
hear a click sound.  
1 Press MENU/DISP for 3 seconds.  
2 Press or repeatedly to until the  
currently time is displayed.  
8 Reconnect the negative terminal of the car  
battery.  
3 Turn clockwise to set hour.  
4 Press to confirm.  
5 Turn anti-clockwise to set minute.  
6 Press to confirm.  
EN 11  
View clock  
1 Press MENU/DISP repeatedly until the  
clock is displayed.  
12 EN  
Store radio stations in  
memory  
4 Listen to radio  
You can store up to 6 stations in each band.  
Tune to a radio station  
1 Press SOURCE repeatedly to selectTuner.  
2 Press or to select band: [FM1], [FM2],  
[FM3], [AM1], or [AM2] .  
Store stations automatically  
1 Press SEARCH for 3 seconds.  
» The six strongest stations of the  
selected band are saved in preset  
channels 1-6 automatically.  
3 Press  
or  
to tune to a radio station  
manually.  
» The radio station is broadcast.  
» To search for a radio station  
Store stations manually  
automatically, press  
seconds.  
or  
for 3  
1 Tune to a station that you want to store.  
2 Press one of the numeric buttons 1 to 6  
for 3 seconds.  
Select tuner sensitivity  
» The station is saved in the selected  
channel.  
You can adjust the tuner sensitivity if you want  
to receive more radio stations or only stations  
with strong signal.  
1 Press MENU/DISP for over 2 seconds.  
2 Press or repeatedly until [LOCAL] or  
[DX] is displayed.  
Tune to a preset station  
1 Press or to select band.  
2 Press the numeric button 1 to 6 to select  
the preset station.  
3 Rotate to select a setting:  
[LOCAL] (local): Only stations with  
strong signal can be broadcast.  
[DX] (distance): Stations with strong  
and weak signals can be broadcast.  
4 Press to confirm the selection.  
Select stereo/mono broadcasting  
For stations with weak signals: to improve the  
reception, change to monoaural sound.  
1 Press MENU/DISP for 3 seconds.  
2 Press or repeatedly until [STEREO]  
or [MONO] is displayed.  
3 Turn to select a setting:  
[STEREO]: stereo broadcast.  
[MONO]: mono broadcast.  
4 Press to confirm the selection.  
EN 13  
5 Play audio files  
Play from USB/SD/SDHC/  
MMC device  
Note  
Note  
Ensure that the disc or device contains playable files.  
Ensure that the USB or SD/SDHC/MMC device contains  
playable music.  
Play a disc  
Insert the USB device  
1 Open the cover marked  
front panel.  
on the  
Note  
You cannot play CDs encoded with copyright protection  
technologies.  
You can play commercially available audio CDs  
and these discs:  
CD-Recordables (CD-R)  
CD-Re-writables (CD-RW)  
MP3 CDs  
WMA CDs  
1 Press on the front panel to release the  
panel.  
2 Insert a CD with the printed side facing up.  
3 Close the panel.  
4 Press 1,  
to start play.  
To pause CD play, press 1  
To resume CD play, press 1  
.
again.  
Remove the CD  
To take out the CD,  
1 Press .  
2 Press beside the disc slot.  
2 Insert the USB device into the USB socket.  
» The unit starts playing from the USB  
device automatically.  
Remove the USB device  
1 Press to turn off the unit.  
2 Remove the USB device.  
14 EN  
Insert a card  
Search for an MP3/WMA  
track  
Note  
This unit supports SD, SDHC, and MMC cards.  
1 Press SEARCH for 3 seconds.  
» Search menu is displayed.  
» [FILE]: search by track name.  
1 Press to release the panel.  
2 Insert the card into the card slot.  
» The unit starts playing from the card  
automatically.  
» [FOLDER]: search by folder sequence.  
2 Turn to select [FILE] and then press  
to confirm.  
3 Turn to enter a character and then  
press .  
4 Repeat step 3 until the search term is  
complete.  
5 Press for 3 seconds to start search.  
» When search is finished, a list of  
matching tracks are displayed.  
6 Turn to skip over the list.  
7 Press to select a track.  
View play information  
1 During play USB/SD/MMC device, press  
MENU/DISP repeatedly to view:  
Remove the card  
Track number and elapsed play time  
Artist  
Album  
Title  
1 Press to turn off the unit.  
2 Press the card until you hear a click sound.  
» The card is now disengaged.  
Folder  
File  
Clock  
3 Remove the card.  
Control play  
Intro play  
To select a folder, press or .  
To skip to the previous/next track, press  
You can play the first 10 seconds of each track.  
or  
To search backward/forward rapidly within  
.
1 During play, press INTRO, 2 to select:  
[INT ON] :After the first 10 seconds  
of each track have been played, play  
stops.  
the current track, press  
seconds.  
or  
for 3  
To pause, press 1,  
To resume play, press 1,  
.
[INT OFF] : Cancel intro play and  
start normal play.  
again.  
EN 15  
Shuffle play  
You can play the tracks in random order.  
1 During play, press SHUF, 4 to select:  
[SHUF ON]: start shuffle play for all  
tracks.  
[SHUF OFF]: cancel shuffle play.  
Repeat play  
1 During play, press 3, REP repeatedly to  
select:  
[RPT 1] (repeat one track): play the  
current track repeatedly.  
[RPT FOLD] (repeat a folder): play all  
tracks in the current folder repeatedly.  
[RPT ALL] (repeat all tracks): play all tracks  
repeatedly.  
Connect external sound  
source  
1 Connect the external sound source to  
MP3 LINK socket with a 3.5 mm cable.  
2 Press SOURCE repeatedly until [MP3  
LINK] is displayed.  
3 Operate the external component (refer to  
the instructions supplied with the external  
component).  
16 EN  
Other sound settings  
6 Adjust sound  
You can also edit user preset EQ.  
1 Press EQ/Audio for 3 seconds.  
2 Press or repeatedly to select the item  
to be adjusted:  
Adjust volume  
1 Turn clockwise/anticlockwise to  
increase/decrease volume.  
[BAS] (bass) range: -7 to +7.  
[MID] (bass) range: -7 to +7.  
[TRE] (treble) range: -7 to +7.  
[BAL] (balance) range: 12L to 12R. (L  
= left speaker, R = right speaker)  
[FAD] (fader) range: 12R to 12F. (R =  
rear speaker, F = front speaker)  
[LPF] (low pass filter) range: 60, 80,  
100, 200.  
Mute  
You can turn off the sound of your audio.  
1 During play, press MUTE .  
To turn the sound back on, press  
MUTE again.  
[MPF] (mid pass filter) range: 500, 1K,  
1.5K, 2.5K.  
[HPF] (high pass filter) range:10K,  
12.5K, 15K, 17.5K.  
Turn Dynamic Bass Boost  
(DBB) on/off  
[SW ON]/[SW OFF] (subwoofer  
volume on or off)  
[SWVOL] (subwoofer volume) range:  
0 to 15.  
1 Press DBB for 3 seconds, the current  
setting is displayed:  
3 Turn to select a value.  
4 Press to confirm.  
» [DBB ON] :The Dynamic Bass Boost  
(DBB) function is on.  
» [DBB OFF] :The DBB function is off.  
2 Press DBB again for 3 seconds to change  
the DBB setting.  
Select preset equalizer  
1 Press EQ/Audio.  
» The current Equalizer setting is  
displayed.  
2 Press EQ/Audio again repeatedly to select  
a preset EQ:  
[USER] (user)  
[FLAT] (flat)  
[POP] (pop)  
[TECHNO] (techno)  
[ROCK] (rock)  
[CLASSIC] (classic)  
[JAZZ] (jazz)  
[OPTIMAL] (optimal)  
EN 17  
Change button backlight  
color  
7 Adjust system  
settings  
You can change button backlight color from  
blue to red or vice versa.  
1 Press MENU/DISP for 3 seconds.  
Select blackout setting  
2 Press or repeatedly to until [KEY  
BLUE] or [KEY RED] is displayed.  
You can set the screen to turn off automatically  
after the unit is idle for 10 or 20 seconds.  
3 Turn to select a setting:  
1 Press MENU/DISP for 3 seconds.  
2 Turn to select a setting:  
[KEY BLUE]: Backlight turns blue.  
[KEY RED]: Backlight turns red.  
[BKO 10 S] :Turn off the screen  
automatically 10 seconds after last  
operation.  
Select start volume  
[BKO 20 S] :Turn off the screen  
automatically 20 seconds after last  
operation.  
Each time you turn on the unit, it can play at the  
last listened volume or at the preset volume.  
[BKO OFF] : Never turn off the  
screen.  
1 Press MENU/DISP for 3 seconds.  
2 Press or repeatedly to until [V -  
LAST] or [V - ADJ] is displayed.  
3 Press to confirm.  
3 Turn to select a setting:  
[V - LAST] : Each time you turn on  
the unit, the volume remains from its  
previous use.  
Turn demo mode on/off  
When demo mode is on, when the unit is  
idle for more than 2 minutes, all functions are  
displayed.  
[V - ADJ] : Each time you turn on the  
unit, the volume is at the preset level.  
4 Press to confirm.  
1 Press MENU/DISP for 3 seconds.  
2 Press or repeatedly to until [DEMO]  
is displayed.  
Store preset volume  
» The screen shows current Demo  
mode setting.  
You can turn on the unit at a preset volume.  
1 Select [V - ADJ] as the start volume.  
2 Press MENU/DISP for 3 seconds.  
3 Press or repeatedly to until [A-VOL]  
is displayed.  
3 Turn to select a setting:  
[DEMO ON] :Turn on the demo  
mode.  
[DEMO OFF] :Turn off the demo  
mode.  
4 Turn to select a value: 0 - 47.  
5 Press to confirm.  
4 Press to confirm.  
18 EN  
Turn beep sound on/off  
Select shock-protect setting  
Each time you press a button, the unit beeps.  
You can turn off/on this beep sound.  
You can select the shock protection setting,  
depending on the stability of your car and the  
condition of the road.  
1 Press MENU/DISP for3 seconds.  
1 Press MENU/DISP for 3 seconds.  
2 Press or repeatedly until [ESP] is  
displayed.  
2 Press or repeatedly to until [BEEP  
ON] or [BEEP OFF] is displayed.  
3 Rotate to select a setting:  
[BEEP ON]:Turn on the beep sound.  
[BEEP OFF]:Turn off the beep sound.  
3 Turn to select a setting:  
[ESP 12]: select this when the road is  
smooth and there are few bumps.  
[ESP 45] select this when the road is  
bumpy and unstable.  
4 Press to confirm.  
4 Press to confirm the selection.  
Turn display scroll on/off  
For track information that is longer than the  
display panel: you can select to cut off the  
remainder of the text, or scroll to display the  
full text.  
Reset  
You can reset the unit to its default setting.  
1 Detach the front panel (see ‘Detach the  
front panel’ on page 21).  
Note  
2 Press the reset button by using a ball-point  
pen or a similar tool.  
If any special characters are present in the MP3 track  
name or album name, it may not display correctly on the  
screen because these characters are not supported.  
Some WMA is protected by Digital Rights Management  
(DRM), it cannot be played on the unit.  
» Preset adjustments such as preset  
channels and sound adjustments are  
erased.  
Folders/files exceed the supported limit of the unit are  
not displayed or played.  
1 Press MENU/DISP for 3 seconds.  
2 Press or repeatedly to until [ROLL  
ON] or [ROLL OFF] is displayed.  
3 Turn to select a setting:  
[ROLL ON] (scroll on):Auto scroll  
during play.  
[ROLL OFF] (scroll off): No auto  
scroll display.  
4 Press to confirm.  
EN 19  
3 Replace the fuse.  
8 Additional  
information  
A1 A2 A3 A4 A5 A6 A7 A8  
B1 B2 B3 B4 B5 B6 B7 B8  
Detach the front panel  
You can detach the front panel to deter theft.  
1 Press to release the panel.  
2 Press the left side of the panel rightward.  
FUSE 15A  
Note  
If the new fuse gets damaged again, there may be an  
internal malfunction. Consult your Philips dealer.  
Remove the unit  
You can remove the unit from the dashboard.  
1 Detach the front panel.  
2 Pull out the unit by using the removal keys.  
3 Pull the panel towards you to detach it  
from the chassis.  
4 Store the panel in the supplied carry case  
to protect it from dirt or damage.  
Replace fuse  
If the fuse is damaged,  
1 Check the electric connection.  
2 Buy a fuse that matches the voltage of the  
damaged fuse.  
20 EN  
Compatible USB devices:  
9 Product  
information  
USB flash memory (USB 2.0 or USB1.1)  
USB flash players (USB 2.0 or USB1.1)  
memory cards (SD / MMC / SDHC)  
Supported formats:  
USB or memory file format: FAT16, FAT32  
MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
Note  
Product information is subject to change without prior notice.  
WMA v9 or earlier  
Directory nesting up to a maximum of 8  
levels  
Number of albums/ folders: maximum 99  
Number of tracks/titles: maximum 999  
ID3 tag v2.0 or later  
Power supply  
Fuse  
12V DC (11V - 16V),  
negative ground  
15 A  
4 - 8  
File name in Unicode UTF8 (maximum  
length: 128 bytes)  
Unsupported formats:  
Suitable speaker  
impedance  
Maximum power output 50 W x 4 channels  
Empty albums: an empty album is an album  
that does not contain MP3/WMA files, and  
is not be shown in the display.  
Unsupported file formats are skipped. For  
example,Word documents (.doc) or MP3  
files with extension .dlf are ignored and  
not played.  
Continuous power  
output  
24 W x 4 channels  
(4 10%T.H.D.)  
Pre-Amp output  
voltage  
2.0V ( USB play mode;  
1 kHz, 0 dB, 10 k  
load)  
Subwoofer output  
voltage  
2.0V (USB play mode:  
61 Hz, 0 dB, 10 k  
load)  
AAC,WAV, PCM audio files  
DRM protected WMA files (.wav, .m4a,  
.m4p, .mp4, .aac)  
Aux-in level  
WMA files in Lossless format  
ISO9660, Joliet  
300 mV  
Dimensions (W x H x D) 188 x 58 x 190mm  
Maximum title number: 512 (depending on  
file name length)  
Weight  
1.36 kg  
Maximum album number: 255  
Supported sampling frequencies: 32 kHz,  
44.1kHz, 48 kHz  
Radio  
Frequency range 87.5 - 108.0 MHz (Europe)  
- FM  
Supported Bit-rates: 32~256 (kbps),  
variable bit rates  
87.5 - 107.9 MHz  
(American)  
Frequency range - 522 - 1620 KHz (Europe)  
AM(MW)  
530 - 1710 KHz  
(American)  
Usable sensitivity  
- FM  
8 V  
Usable sensitivity -  
AM(MW) (S/N =  
20 dB)  
30 V  
EN 21  
Ensure that the CD is not encoded with  
copyright protection technologies.  
The CD skips tracks  
10 Troubleshooting  
Ensure that the CD is not damaged or  
dirty.  
Ensure that random mode is deactivated.  
Caution  
Never remove the casing of this apparatus.  
Disc cannot be ejected  
Press and hold .  
Preset stations lost.  
To keep the warranty valid, never try to repair  
the system yourself.  
Battery cable is not correctly connected.  
Connect the battery cable to the terminal  
that is always live.  
If you encounter problems when using this  
apparatus, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site (www.  
philips.com/support).When you contact Philips,  
ensure that your apparatus is nearby and the  
model number and serial number are available.  
No power or no sound.  
Car engine is not on.Turn the car engine  
on.  
Cable is not correctly connected. Check  
connections.  
Fuse is burnt. Replace fuse (see ‘Replace  
fuse’ on page 21).  
Volume is too low.Adjust volume (see  
‘Adjust volume’ on page 18).  
If the above solutions cannot help, press  
the RESET button.  
Ensure that the track played is of a  
compatible format.  
Noise in broadcasts.  
Signals are too weak. Select other stations  
with stronger signals.  
Check the connection of the car antenna.  
Change broadcast from Stereo to mono  
(see ‘Select stereo/mono broadcasting’ on  
page 14).  
Cannot play disc  
Ensure that the disc label is inserted with  
the printed side facing up.  
Wipe the disc with fibre cleaning cloth  
from the centre to the edge in a straight  
line.  
This disc may be defective. Play another  
disc.  
Ensure that the CD is a finalised CD/  
CD-R/CD-RW.  
22 EN  
11 Glossary  
M
MMC  
MultimediaCard.A type of memory card with a  
flash memory.  
MP3  
A file format with a sound data compression  
system. MP3 is the abbreviation of Motion  
Picture Experts Group 1 (or MPEG-1) Audio  
Layer 3.With the MP3 format, one CD-R or  
CD-RW can contain about 10 times more data  
than a regular CD.  
S
SD  
Secure Digital.A type of memory card with a  
flash memory.  
SDHC  
Secure Digital High Capacity (SDHC) is a type  
of flash memory card based on the SDA 2.00  
specification.The SDA 2.00 specification enables  
SD cards to reach higher capacities from 4GB  
to 32GB, and growing.  
W
WMA (Windows Media Audio)  
An audio format owned by Microsoft, is a  
part of Microsoft Windows Media technology.  
Includes Microsoft Digital Rights Management  
tools,Windows MediaVideo encoding  
technology, and Windows Media Audio  
encoding technology.  
EN 23  
24 EN  
© 2009 Koninklijke Philips Electronics N.V.  
All rights reserved.  
Document order number:  

Pioneer AVD W6210 User Manual
Pentax K20D User Manual
Pentax Camcorder PC 330 User Manual
Oster Blender 139846 User Manual
Nikon Camcorder D5100 User Manual
Mellerware Blender MW_ 62200_IM User Manual
Kenwood KDC 2022V User Manual
Kenwood Car Stereo System r sg7 User Manual
Kenwood Car Entertainment System User Manual
JVC KW AVX830 User Manual