Panasonic Stereo System SC PMX9DB User Manual

Start wireless network settings  
Preparation  
1 Place SC-PMX9DB close to the wireless network router as  
CD Stereo System  
possible and then point the antenna on the rear of the main  
unit up as shown in the figure.  
Do not tilting the antenna forward or backwards when it is pointing up.  
Model No. SC-PMX9DB  
2 Connect the AC mains lead while the LAN cable is  
disconnected.  
VQC9510  
3 Turn this system on.  
Wi-Fi® connection guide  
You can wirelessly stream music from an iOS device, an Android™ device or a  
Mac/PC to SC-PMX9DB’s speakers. To use this music-streaming feature,  
SC-PMX9DB must join the same 2.4 GHz wireless network as the compatible  
device through the wireless network router (access point).  
4 Follow the chart below to choose the network setting method.  
If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced  
setting, refer to “Method 4” in the operating instructions.  
Does your wireless network router support  
TM  
WPS (Wi-Fi Protected Setup )?  
For information on how to connect with a LAN cable, refer to “Wired LAN connection” in  
the Operating Instructions.  
Yes  
No / Do not know  
*1  
Wireless network  
router  
SC-PMX9DB  
iOS device , Android device  
or Mac/PC  
Are you using an iPod touch/iPhone/iPad?  
Is the iOS version 5.0 or later?  
*1: Refer to the Operating Instructions for the compatibility.  
Screen images used in this sheet : iPhone 4S, iOS 6.0.1  
Yes  
No  
Method 1  
Method 2  
Method 3  
The following explanations are based on an iPhone.  
Start “Panasonic Stereo System  
Network Setup” on your smartphone  
and follow the indications.  
1
Press [SETUP] on the remote  
control repeatedly to select  
“Net Setup” and then press [OK].  
3
Press [SETUP] on the remote  
control repeatedly to select  
“Net Setup” and then press [OK].  
“With iPod” is indicated on the display.  
Disconnect iPod/iPhone/iPad  
connected to the main unit.  
4
1
2
2 “With iPod” is indicated on the display.  
Press [SETUP] on the remote  
Note for the iOS version  
Connect the iPhone to your  
home wireless network.  
After step 3  
You can make the wireless  
network settings with the app,  
“Panasonic Stereo System  
Network Setup” (for free).  
If you’re using an Android device,  
download the app at Google  
Play™. If you’re using an iPod  
touch/iPhone/iPad, download it at  
the App Store.  
control repeatedly to select “WPS  
Push” and then press [OK].  
“WPS” flashes on the display.  
1 Enter the password for the home  
wireless network to which the iOS  
device is connected.  
2 When a message instructing you  
to connect the iOS device to this  
system is displayed, press the  
home button.  
3 On the Wi-Fi network selection  
screen in “Settings”, select  
“00 Setup _ _ _ _ _ _”.  
Unlock your iPhone and then  
press [OK] on the remote control.  
5
6
A message will pop-up on the  
iPhone. Allow the iPhone to share  
the wireless network settings.  
Connect the iPhone to the  
main unit.  
Choose one of the following  
connections.  
3
Lightning connector compatible iPod  
touch/iPhone:  
Press the WPS button on the  
wireless network router.  
3
Preparation  
Connect your smartphone to  
your home wireless network.  
Check the password for your  
home wireless network.  
2
*
The settings are completed  
when “Success” is displayed  
and “ ” is indicated on the  
display.  
7
8
4 When a message indicating the  
completion of the connection to  
this system is displayed, restart  
the app.  
The settings are completed when  
Press [SETUP] on the remote  
control repeatedly to select  
“Net Setup” and then press [OK].  
“With iPod” is indicated on the display.  
“Success” is displayed and “  
indicated on the display.  
” is  
1
iPod touch/iPhone/iPad with  
iOS 5.0 or later:  
Press [OK] on the remote  
control to exit.  
Press [SETUP] on the remote  
2
control repeatedly to select  
“Manual” and then press [OK].  
iPad  
5 When a message indicating the  
completion of the Wi-Fi setup of  
this system is displayed, close the  
app, and then check the operation  
of AirPlay, etc.  
Press [OK] on the remote  
control to exit.  
4
Dedicated cable supplied with the iOS  
device  
*2 : The marking may differ.  
1
2
Connect the iPhone to your home wireless network.  
Using AirPlay  
The following explanations are based on an  
iPhone.  
AirPlay, the AirPlay logo, iPad, iPhone, and iPod touch are  
trademarks of Apple Inc., registered in the U.S. and other countries.  
App Store is a service mark of Apple Inc.  
Android and Google Play are trademarks of Google Inc.  
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi  
Alliance.  
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.  
“Wi-Fi” and “Wi-Fi Protected Setup” are marks or registered marks  
of the Wi-Fi Alliance.  
Your home wireless  
network name  
(SSID)*3  
“Settings”  
Turn on  
“Wi-Fi”  
*3 : You may be prompted for the password. Enter the password of your home wireless network.  
All other trademarks are trademarks of their respective owners.  
Select “Panasonic PMX9 _ _ _ _ _ _” from the AirPlay  
icon and start play.  
“Panasonic PMX9 _ _ _ _ _ _”  
Play starts.  
(with a slight delay)  
“Music”  
 
 

Radio Shack 3Com Bigpicture User Manual
Plantronics Bluetooth Headset 925 User Manual
Optimus CD 8250 User Manual
Nikon MH 22 User Manual
Lochinvar 2 User Manual
Kenwood KDC 319 User Manual
JVC KV M70 User Manual
JVC KD SH1000J User Manual
JVC KD R320 User Manual
JVC KD A625 User Manual