Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BD755
DMP-BD75
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
P
PC
VQT3A92-1
Table of contents
Getting started
Settings
IMPORTANT SAFETY
Playback menu. . . . . . . . . . . . . . . . .21
Setup menu . . . . . . . . . . . . . . . . . . .22
INSTRUCTIONS. . . . . . . . . . . . . . . . 2
Accessories. . . . . . . . . . . . . . . . . . . . 4
Unit and media care . . . . . . . . . . . . . 4
Control reference guide . . . . . . . . . . 5
Playable discs/USB devices . . . . . . . 6
Reference
Troubleshooting guide . . . . . . . . . . .26
Messages. . . . . . . . . . . . . . . . . . . . .28
Supplemental information . . . . . . . .29
Specifications. . . . . . . . . . . . . . . . . .30
Limited Warranty (ONLY FOR U.S.A.
AND PUERTO RICO) . . . . . . . . . . .33
Limited Warranty
Connections & Settings
STEP 1 : Connecting to a TV . . . . . . 8
STEP 2 : Connecting to an amplifier/
receiver . . . . . . . . . . . . . . . 9
STEP 3 : Connecting to a broadband
network . . . . . . . . . . . . . . . 9
(Only for CANADA) . . . . . . . . . . . . .34
Referencia rápida en español
STEP 4 : Connecting to an AC power
source . . . . . . . . . . . . . . . 10
(Spanish Quick Reference) . . . . . . . . . . .35
Index . . . . . . . . . . . . . . . . . Back cover
STEP 5 : Settings . . . . . . . . . . . . . . 10
About descriptions in this Owner’s
Manual
≥ Instructions for operations are generally described
using the remote control.
Playback
About Firmware updates (> 12)
Inserting or removing media . . . . . . 13
HOME menu . . . . . . . . . . . . . . . . . . 13
Playing video contents . . . . . . . . . . 14
Playing still pictures . . . . . . . . . . . . 17
Playing music . . . . . . . . . . . . . . . . . 18
Enjoying Network Service. . . . . . . . 18
Playing back contents on the DLNA
server (DLNA). . . . . . . . . . . . . . . . . 19
Linked operations with the TV
(VIERA LinkTM “HDAVI ControlTM”). . . . . . 20
VQT3A92
3
Accessories
Unit and media care
Check the supplied accessories before using this unit.
∫ Clean this unit with a soft, dry cloth
1
Remote control
≥ Never use alcohol, paint thinner or benzine to clean this
(N2QAYB000575)
unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
2
1
Batteries for remote control
AC power supply cord
(K2CB2CB00022)
1
[BD755] HDMI cable
(K1HY19YY0012)
∫ Clean the lens
≥ Use the lens cleaner (not supplied) to clean the unit’s lens.
[For_Canada]
∫ Clean discs
The enclosed Canadian French label sheet corresponds to the English
display on the front and back side of the unit.
DO NOT
DO
≥ Product numbers provided in this Owner’s Manual correct as of
December 2010. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
≥ [For_U.S.A._and_Puerto_Rico] : To order accessories, refer to
“Accessory Purchases (United States and Puerto Rico)” on page 33.
[For_Canada] : To order accessories, call the dealer from whom you
have made your purchase.
Wipe with a damp cloth and then wipe dry.
∫ Disc handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches
or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or
labels (rented discs etc).
Using the remote control
Insert so the poles (i and j) match those in the remote
control.
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
∫ To dispose or transfer this unit
R6/LR6, AA
(Alkaline or manganese
batteries)
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then
follow the procedure to return all the settings to the factory
presets to delete the user settings. (ꢀ 26, “To return all
settings to the factory preset.”)
Point it at remote control signal sensor on this unit. (ꢀ 5)
≥ The operation history may be recorded in the memory of
this unit.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
CAUTION
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
VQT3A92
4
Control reference guide
12
1
2
Turn the unit on and off
TV operation buttons
You can operate the Panasonic TV through the unit’s
remote control. (Depending on the TV these buttons
may not work.)
[Í TV POWER] : Turn the television on and off
[AV] : Switch the input select
1
2
13
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers
Cancel
Select audio (> 14)
Basic playback control buttons (> 14)
Show status messages (> 14)
3
4
5
6
7
8
9
14
3
15
4
16
5
Show the selection screen of network features (> 18)
Show Pop-up menu/Top menu/Direct Navigator (> 14)
10 Show sub menu (> 15)
6
11 These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
≥ Operating contents of Network Service. (> 18)
12 Transmit the remote control signal
13 Open or close the disc tray (> 13)
CAUTION
17
7
8
Do not place objects in front of the unit. The disc tray
may collide with objects when it is opened, and this may
cause malfunction.
9
18
19
14 Show Playback menu (> 21)
15 Switch on/off Secondary Video (Picture-in-picture)
(> 16)
16 Show NETFLIX screen
17 Exit the menu screen
20
10
11
18 Show HOME menu (> 13)
19 Selection/OK, Frame-by-frame (> 14)
20 Return to previous screen
1
2
3
4
5 6 7
8
5
Remote control signal sensor
1
POWER button (POWER Í/I) (> 10)
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and right
Stop (> 14)
Start play (> 14)
Open or close the disc tray (> 13)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
Disc tray (> 13)
USB port (> 13)
6
7
8
2
3
4
Display (> 29)
Rear panel terminals (> 8–10)
VQT3A92
5
Playable discs/USB devices
Playable contents
Type Logo examples
Type detail
(ꢀ 30)
BD-Video
BD-RE
Video
Video
JPEG
BD
Video
MKV
BD-R
DVD-Video
Video
DVD-R
Video
AVCHD
MKV
DVD
MP3
JPEG
DVD-R DL
DVD-RW
Video
AVCHD
—
+R/+RW/+R DL
Music CD
Music [CD-DA]
MKV
Music [CD-DA]
MP3
CD
CD-R
CD-RW
—
JPEG
MKV
MP3
JPEG
USB devices
(up to 2 TB)
—
USB
VQT3A92
6
∫ Discs that cannot be played in this
∫ USB device
≥ This unit does not guarantee connection with all USB
devices.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32. If the HDD
is not recognized the power to the HDD may not be
supplied. Supply power from an external source.
unit
Any other disc that is not specifically supported or
previously described.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ WMA discs
≥ DivX discs
≥ PAL discs
≥ HD DVD
≥ It may not be possible to play the above media in some cases due to the
type of media, the condition of the recording, the recording method and
how the files were created.
≥ The producers of the disc can control how discs are played, so you may
not always be able to control play as described in this Owner’s Manual.
Read the disc’s instructions carefully.
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code “A”.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “1” or “ALL”.
Example:
1
2
1
ALL
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded
by a recorder, etc. needs to be finalized by the recorder to
play on this unit. Please refer to the recorder’s instructions.
∫ BD-Video
≥ This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) adopted in BD-Video.
– If “Dolby D/Dolby D +/Dolby TrueHD” is set to “PCM”,
the maximum possible number of Dolby sound is 2ch
PCM. (ꢀ 23)
∫ Music CD
≥ Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
VQT3A92
7
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the back cover). It is recommended that
you use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft.) or
less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
10BASE-T/100BASE-TX
LAN
Back of the unit
∫ Via an HDMI AV OUT terminal (High quality)
∫ Via a VIDEO OUT terminal (Standard quality)
HDMI IN
AUDIO IN
R
L
VIDEO IN
Audio/Video cable
HDMI cable
(Only supplied with
DMP-BD755)
-T/100BASE-TX
10BASE-T/100BASE-TX
LAN
LAN
≥ Set “HDMI Audio Output” to “On” (ꢀ 24).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (ꢀ 20).
≥ Connect terminals of the same color.
VQT3A92
8
STEP 2 : Connecting to STEP 3 : Connecting to
an amplifier/receiver
a broadband network
The following services can be used when this unit is
connected to broadband.
≥ Firmware can be updated (ꢀ 12)
≥ You can enjoy BD-Live (ꢀ 16)
≥ You can enjoy Network Service (ꢀ 18)
≥ DLNA feature (ꢀ 19)
For details about connection method, refer to the
instructions supplied with the connected equipment.
HDMI IN
(ARC)
∫ LAN cable connection
HDMI cable
10BASE-T/100BASE-TX
Multi channel
speakers
(ARC)
LAN Cable
Broadband router, etc.
Amplifier/receiver
HDMI IN
LAN Cable
HDMI cable
(Only supplied with
DMP-BD755)
/100BASE-TX
AN
Modem
(Broadband)
*Provided by ISP
≥ Set “HDMI Audio Output” to “On” (ꢀ 24).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver (ꢀ 23).
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (ꢀ 20).
≥ When using the TV or amplifier/receiver that does not
have the indication of “(ARC)” (non-ARC-compatible) on
the HDMI terminal, in order to enjoy TV’s sound by
amplifier/receiver it is also required to connect the
amplifier/receiver and TV using an optical digital cable.
VQT3A92
9
STEP 4 : Connecting to STEP 5 : Settings
an AC power source
Easy Setting
After connecting your new player for the 1st time and
10BASE-T/100BAS
pressing the power button, a screen for the basic settings
will appear.
Preparation
LAN
Turn on the television and select the appropriate video
input on the television.
AC power supply cord
(supplied)
1
2
Press [Í POWER].
Setup screen appears.
Follow the on-screen instructions and
make the settings with [3, 4] and press
[OK].
To a household AC outlet
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
≥ This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.1 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. (ꢀ 25)
Install this unit so that the power cord can be unplugged from the
socket outlet immediately if any problem occurs.
VQT3A92
10
Network Easy Setting (Internet Connection Check)
Network Easy Setting
Network Easy Setting (Internet Connection Check)
Complete.
The configuration of your network is about to begin.
- Connection to the Internet
Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
the error and the solution for it.
Press [OK].
Follow the on-screen instructions and make
the settings with [3, 4, 2, 1] and press
[OK].
Network Easy Setting
The confirmation of a network connection and the
Internet functions' (BD-Live etc.) accessibility is
conducted.
OK
Is a LAN cable already connected ?
Please refer to the operating instructions for how
to connect to with a LAN cable.
A broadband Internet connection is necessary for
BD-Live.
Display
Check the following
Press [OK] to proceed.
Cannot find the
server.
(Error code: B019)
≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address/
DNS Settings” (ꢀ 24)
OK
RETURN
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (ꢀ 24) and the router
Failed to connect to
the server.
(Error code: B020)
When you experience
problems with settings
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting”
in the Setup menu. (ꢀ 24)
≥ You can redo these settings individually using “Network Settings”.
(ꢀ 24)
Network Easy Setting
(Home Network Connection Check)
Network Easy Setting (Home Network Connection Check)
Complete.
1. LAN cable connection
Fail
Fail
Fail
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Reprogramming the remote
control
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (ꢀ 25, “Remote Control Code”)
Yes
OK
No
Check the
following
Display
1. LAN cable connection
2. IP address setting
Fail
≥ Connectionof
the LAN
cables (ꢀ 9)
Fail
3. Connection to gateway
1. LAN cable connection
2. IP address setting
Fail
Pass
Fail
≥ Connection
and settings
of the hub
and router
≥ Settings of
“IP Address/
DNS
3. Connection to gateway
1. LAN cable connection
Fail
Pass
Pass or
Home
network
available
2. IP address setting
Settings”
(ꢀ 24)
3. Connection to gateway
Fail
VQT3A92
11
Firmware updates
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
message is displayed.
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME] ꢀ select “Setup” ꢀ select “Player
Settings” ꢀ select “Others” ꢀ [OK] ꢀ select “Firmware
Update” ꢀ [OK] ꢀ select “Update Now”
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “FInISH” will be displayed on
the unit’s display. Unit will restart and the following screen
will be displayed.
The firmware was updated.
Current Version: x.xx
OK
RETURN
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
(This site is in English only.)
To show the firmware version on this unit. (ꢀ 25, “System
Information”)
≥ Downloading will require several minutes. It may take longer or
may not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set
“Automatic Update Check” to “Off”. (ꢀ 25)
VQT3A92
12
Playback
Inserting or removing
media
HOME menu
Major functions of this unit can be operated from the HOME
menu.
Preparation
Turn on the television and select the appropriate video input
on the television.
1
≥ When inserting a media item, ensure that it is facing the
right way up.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be displayed on
the connected equipment. For details, refer to the
instructions for the connected equipment.
1
2
Press [Í POWER] to turn on the unit.
Press [OK] or [3, 4, 2, 1] to select the
item.
HOME
Blu-ray Disc Player
Network
Setup
Photos
Music
Videos
≥ When a media is inserted, contents selection screen
for that media is displayed.
≥ If there are any other items, repeat this step.
≥ To return to HOME menu, select “HOME” or press
[RETURN] several times.
Play back the contents.
(ꢀ 14, 17, 18)
≥ When multiple contents
are recorded, select the
types of contents or the
title.
Disc
USB
Videos/
Photos/
Music
Internet
Content
Displays the home screen of
Network Service (ꢀ 18)
Network
Setup
DLNA Client (ꢀ 19)
Player
Settings
(ꢀ 22)
USB
Management
(ꢀ 16)
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when using a disc with
both data files (MP3, JPEG, MKV) and Video. (ꢀ 22)
VQT3A92
13
Playing video contents
Other operations during play
These functions may not work depending on the media and
contents.
BD DVD CD USB
1
2
Insert the media.
Stop
If the menu is displayed, press [3, 4, 2, 1] to select
the item. (> 13)
Press [∫STOP].
The stopped position is memorized.
Press [3, 4] to select the title and press
Resume play function
[OK].
Press [1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press
[∫STOP] several times to display “StOP” on the unit’s
display.
≥ On BD-Video discs including BD-J, the resume play
function does not work.
∫ To show menus
You can show Top Menu, Direct Navigator or Pop-up Menu.
Press [POP-UP MENU/TOP MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
Pause
∫ To show the status messages
While playing, press [STATUS].
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart play.
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
display information may change or will disappear from the
screen.
Search/Slow-motion
Search
e.g.BD-Video
While playing, press [SEARCH6] or
[SEARCH5].
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
≥ Music and MP3: The speed is fixed to a single step.
BD (Video)
T1 C1 0:05.14
Play
Slow-motion
0:20.52
While paused, press [SEARCH5].
Current position
Total time
The speed increases up to 5 steps.
≥ Press [1PLAY] to revert to normal playback speed.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [∫STOP] when you have finished playback to protect the unit’s
motor, your television screen and so on.
≥ Depending on media and contents, the display may change or may not
appear.
Skip
While playing or paused, press [:] or
≥ MKV : Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have
been dragged and dropped, copied and pasted to the media.
≥ To save on electricity, the power is turned off automatically if there is no
button operation for about 30 minutes when not playing back (such as
when paused, displaying the menu, displaying still pictures, etc.).
(Compatible with ENERGY STAR)
[9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
Frame-by-frame
While paused, press [1] (;1).
≥ Press and hold to change in succession forward.
≥ Press [1PLAY] to revert to normal playback speed.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language, etc.
VQT3A92
14
Useful functions
1
2
Press [SUB MENU].
Select an item, then press [OK].
While Direct Navigator screen is displayed
View
To play playlists.
Playlists
View Titles
To select the title.
Select
Folder
To switch to another folder.
While playing
Top Menu
To display Top Menu.
To display Pop-up Menu.
To display Menu.
Pop-up
Menu
Menu
≥ Depending on the media and contents, displayed items are different.
∫ Displaying subtitle text
You can display subtitle text on the MKV video disc with this
unit. The operation might be different or it may not operate
properly depending on the way the file was made or the
state of this unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” (ꢀ 21)
≥ MKV video files that do not display “Text” do not contain subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language
settings. (ꢀ 22)
VQT3A92
15
Playing picture-in-picture
Enjoying BD-Live or
picture-in-picture in BD-Video
To turn on/off secondary video
Press [PIP].
Enjoying BD-Live discs with
Internet
Secondary video
BD-Live allows you to enjoy more functions such as
subtitles, exclusive images and online games by connecting
this unit to the Internet. Since most of the BD-Live
compatible discs are played back using the BD-Live
function, additional contents are required to be downloaded
into the external memory (local storage).
≥ This unit is using a USB device as a local storage device.
BD-Live function cannot be used when there is no USB
device inserted.
Primary video
1
2
3
Perform network connection and
settings. (ꢀ9, 11)
To turn on/off secondary audio
[DISPLAY] ꢀselect “Disc” ꢀ[1] ꢀselect
“Signal Type” ꢀ[OK] ꢀset “Soundtrack” in
“Secondary Video” to “On” or “Off”
Insert a USB memory with 1 GB or more
free space.
Insert the disc.
≥ The usable functions and the operating method may vary with each
disc, please refer to the instructions on the disc and/or visit their
website.
≥ Some BD-Live content available on the Blu-ray discs may require an
Internet account to be created in order to access the BD-Live content.
Follow the screen display or instruction manual of the disc for
information on acquiring an account.
≥ “BD-Live Internet Access” may need to be changed for certain discs
(ꢀ22).
∫ Deleting data on the USB device
If you no longer need data recorded on the USB device, you
can delete data with the following operation.
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to
“Off”, secondary audio will not be played (ꢀ23).
1
2
3
4
5
Insert a USB device.
Press [HOME].
Press [OK] to select “Setup”.
Press [1] to select “USB Management”.
Press [OK].
USB Management
No. of Files
1
USB device
Free space 1844 MB
BD-Video Data Erase
OK
RETURN
6
7
Press [2, 1] to select “Yes” and press [OK].
Press [2, 1] to select “Start” and press [OK].
VQT3A92
16
Playing still pictures
Useful functions
BD DVD CD USB
(BD-RE, DVD-R/-R DL, CD-R/RW, USB device)
1
2
Press [SUB MENU].
Select an item, then press [OK].
1
2
Insert the media.
While Photo View screen is displayed
If the menu is displayed, press [3, 4, 2, 1] to select
the item. (> 13)
Select
Folder
To select the still pictures in another folder.
Start
Slideshow
You can display still pictures one by one at a
constant interval.
Press [3, 4, 2, 1] to select the still
picture and press [OK].
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
DIRECT NAVIGATOR
USB ( JPEG )
Photo View
Slideshow
Settings
0001
0005
0009
0004
Repeat slideshow.
Press [3, 4, 2, 1] to select “Set” and
press [OK].
Page 001/001
Play
SUB
MENU
RETURN
While playing
Press [2, 1] to display the previous or next still picture.
Rotate Right
Rotate Left
Rotate the still picture.
To exit the screen
Press [POP-UP MENU/TOP MENU].
≥ Depending on the condition of the unit and media contents, displayed
items are different.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
∫ To show the still picture properties
While playing, press [STATUS] twice.
Shooting date
Photo 11/12/2007
Total
3/9
To exit the screen
Press [STATUS].
VQT3A92
17
Playing music
Enjoying Network Service
You can enjoy Network Service such as streaming movie,
etc. (Current as of December 2010)
DVD CD USB
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
Preparation
≥ Network connection (> 9)
≥ Network setting (> 11)
1
2
Insert the media.
If the menu is displayed, press [3, 4, 2, 1] to select
the item. (> 13)
1
2
3
Press [NETWORK].
Press [3, 4] to select the track and press
≥ NETFLIX can be accessed directly by pressing
[NETFLIX] button.
[OK].
Press [1] to select “Internet Content”.
0.09
Track01
4.30
DIRECT NAVIGATOR
CD
Music list
≥ Message is displayed. Please read these instructions
carefully and then press [OK].
5 Tracks / Total Play Time 20min54sec
No.
Track Name
Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 02sec
001
002
003
004
005
Track01
Track02
Track03
Track04
Track05
Press [3, 4, 2, 1] to select the item and
press [OK].
Operable buttons:
[3, 4, 2, 1], [OK], [RETURN], colored buttons,
number buttons
Play
RETURN
The home screen;
Network Service
“
” indicates the track currently playing.
Playing a track in another
folder
Settings
Images are for illustration purposes, contents may
change without notice.
1
2
While the Direct Navigator screen is displayed
Press [SUB MENU].
To exit from Network Service
Press [EXIT] or [HOME].
Press [3, 4] to select “Select Folder”
and press [OK].
≥ When playing content from a disc and/or USB device Network Service
cannot be accessed by pressing [NETWORK].
≥ You cannot select folders that contain no compatible tracks.
≥ Set “Lock” in “Internet Content Settings”, when restricting the use of
Network Service (> 24)
≥ If using slow Internet connection, the video may not be displayed
correctly. A high-speed Internet service with a speed of at least 6 Mbps
is recommended.
≥ Be sure to update the firmware when a firmware update notice is
displayed on the screen. If the firmware is not updated, you will not be
able to use Network Service function. (> 12)
≥ Network Service home screen is subject to change without notice.
≥ The services through Network Service are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be
presented in specific languages.
VQT3A92
18
To exit from Home Network
Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU].
Playing back contents on
the DLNA server (DLNA)
≥ Menu structure will be different depending on the equipment connected
to this unit. Select the contents by repeating the operation.
≥ Depending on the contents and the connected equipment, playback
may not be possible.
≥ Items displayed in gray on the display cannot be played back by this
unit.
≥ This unit cannot be played back via connected equipment.
≥ Depending on the performance of the connected PC, video frames may
be dropped during playback, or video may not playback at all.
You can enjoy viewing video, still pictures and music saved
on a DLNA Certified media server connected to the home
network with this unit.
– This feature is only supported by Windows 7 Operating
system.
Preparation
1
Perform network connection and network settings of this
unit. (ꢀ 9, 11)
2
Perform Home Network settings of the PC.
≥ Add the contents and folder to the Windows Media® Player
library.
– Playlist of Windows Media® Player can play back only
the contents that are stored in the libraries.
For details about the setting and operation method of
connected equipment, refer to the following Website and
the operating instructions for each item of equipment.
(This site is in English only.)
1
2
Press [NETWORK].
Press [3] to select “DLNA Client”.
≥ A list of equipment connected via the network is
displayed.
≥ This list can be updated by pressing [R] on the remote
control.
e.g.
DLNA Client
XXXXXX
OK
RETURN
Servers found on the network are displayed.
Please select one.
Update
3
4
Press [3, 4] to select the equipment to
playback the contents, and press [OK].
Press [3, 4, 2, 1] to select the item to
playback (folder), and press [OK].
≥ You may be able to use convenient functions
depending on the disc or content by pressing
[SUB MENU] or [DISPLAY].
≥ Control Panel is displayed once
the playback starts.
Operation can be performed
with [3, 4, 2, 1], [OK] and
[EXIT].
Control Panel
e.g.
EXIT
≥ Press [OK] if the Control Panel
is not displayed.
≥ Press [RETURN] to hide the Control Panel.
VQT3A92
19
Linked operations with
the TV
(VIERA LinkTM “HDAVI ControlTM”)
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM
.
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) or amplifier/receiver under
“HDAVI Control”.
You can use this function by connecting the
equipment with an HDMI cable. See the operating
instructions for connected equipment for operational
details.
Preparation
1
2
3
Set “VIERA Link” to “On” (ꢀ 24). (The default setting is
“On”.)
Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so
that the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
Automatic input switching
Power on link
When play starts on the unit, the TV will automatically switch
the input channel and display the corresponding action.
Additionally when the TV is off, the TV will automatically turn
on.
Power off link
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch
the television off.
≥ This unit supports “HDAVI Control 1” function.
This standard is compatible with Panasonic’s conventional HDAVI
equipment.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
VQT3A92
20
Settings
Audio channel
Select the audio channel number.
(ꢀ 14, “Changing audio”)
Playback menu
1
Press [DISPLAY].
Angle
e.g., BD-Video
Select the number of the angle.
Disc
Play
Video
Signal Type
Off
Main
1ENG
Subtitle
≥ Some items may be changed only on the disc specific menu. (ꢀ 14)
-
-
Subtitle Style
Angle
Settings
Menus
Items
Play
2
Press [3, 4] to select the menu and
press [1].
Repeat Play
(Only when the elapsed time is being displayed on the unit’s
display.)
Select the item which you want to repeat. The items
displayed differ depending on the type of media.
3
4
Press [3, 4, 2, 1] to select the item and
press [1].
Press [3, 4] to select the setting.
Select “Off” to cancel.
Some items can be changed by pressing [OK].
Random
Select whether or not to play random.
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing,
stopped, etc.) and media contents, there may be some
items that you cannot select or change.
Regarding Language : (ꢀ 29)
Video
Picture
Select the picture quality mode during play.
≥ If you select “User”, you can make further adjustments.
Press [1] to select “Picture Adjustment” and press [OK].
Disc
Signal Type
Progressive
Select the method of conversion for progressive output to
suit the type of material being played.
The recording method of
original video appears.
Video
Primary
Video
Select the type of audio or
language.
≥ When the content is distorted change the settings from
“Auto” to “Video”.
Soundtrack
Video
Select on/off of images. The
recording method of original
video appears.
Secondary
Video
Select on/off of audio and the
language.
Soundtrack
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending
on the media.
Subtitle Style
Select the subtitle style.
VQT3A92
21
Setup menu
Disc
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
1
2
3
Press [HOME].
Press [OK] to select “Setup”.
Press [2] to select “Player Settings”.
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
Player Settings
Disc
Video
Audio Language
Choose the language for audio.
Audio
Display
≥ If “Original” is selected, the original language of each disc
will be selected.
≥ Enter a code (> 29) with the number buttons when you
select “Other ¢¢¢¢”.
TV / Device Connection
Network
Others
OK
RETURN
Subtitle Language
Choose the language for the subtitle.
4
5
Press [3, 4] to select the menu and
≥ If “Automatic” is selected and the language selected for
“Audio Language” is not available, subtitles of that
language will automatically appear if available on that
disc.
≥ Enter a code (> 29) with the number buttons when you
select “Other ¢¢¢¢”.
press [OK].
Press [3, 4] to select the item and press
[OK].
If there are any other items, repeat these steps.
6
Press [3, 4, 2, 1] to select the option
Menu Language
Choose the language for the disc menus.
≥ Enter a code (> 29) with the number buttons when you
select “Other ¢¢¢¢”.
and press [OK].
≥ There may be differences in operation methods. If this happens, follow
the on-screen instructions for the operation.
BD-Live Internet Access (> 16)
You can restrict Internet access when BD-Live functions are
used.
≥ If “Allow (Limited)” is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.
About the password
The following items use the same password.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” (> 24)
Mixed Data Disc Option
Select the playback contents on discs with both data files
and Video.
≥ If “MP3/JPEG/MKV” is selected, the video menu function
is unavailable.
≥ If “BDAV/AVCHD” is selected, data file cannot be played
back.
Subtitle Text
Select a suitable item according to the language used for
MKV subtitles text.
≥ This item is displayed only after playing back a file.
≥ BDAV is one of the video formats that are recorded on a BD-RE/BD-R.
(> 6)
VQT3A92
22
Video
Display
Black Level Control
Select lighter or darker for adjusting the black level control to
Status Messages
Choose whether to show status messages automatically.
the desired setting for picture enhancement.
On-screen Language
Choose the language for menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If there is no operation for 10 minutes or more, Direct
Navigator screen switches to HOME menu automatically.
≥ While playing and pausing, etc., this function is not
available.
Audio
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, Direct Navigator screen
switches to the other states automatically.
Digital Audio Output
Press [OK] to show the following settings:
Front Panel Display
Dolby D/Dolby D +/Dolby TrueHD
Changes the brightness of the unit’s display.
≥ If “Auto” is selected the display is dimmed during playback
and bright not during playback.
DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment cannot
decode the respective audio format. This unit decodes
the audio format and transmits to the connected
equipment.
License
Information about the software used by this unit is displayed.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (ꢀ 16)
≥ If “Off” is selected, the unit outputs the primary audio
TV / Device Connection
only.
TV Aspect
Set to match the type of television connected.
Downmix
When connected to a 4:3 aspect television and playing 16:9
ratio image:
Select the downmix system of multi-channel to 2-channel
sound.
≥ Select “Surround encoded”, when the connected
equipment supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV OUT.
≥ The audio will be output in “Stereo” in the following cases:
– AVCHD playback
The sides are cut off so
the picture fills the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.
4:3 Pan &
Scan
– Playback of secondary audio (including the button click
sound).
Black bands appear at the
top and bottom of the
picture.
4:3
Letterbox
When connected to a 16:9 widescreen television and
playing 4:3 ratio image:
Video is displayed as a 4:3 ratio image in the
center of the screen.
16:9
Video is displayed as a horizontally
16:9 Full
stretched 16:9 image.
VQT3A92
23
HDMI Connection
Press [OK] to show the following settings:
Network
Network Easy Setting (ꢀ 11)
HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
Network Settings
Perform network-related settings individually.
≥ If “Auto” is selected, automatically selects the output
resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p,
you need to connect the unit directly to 1080p
compatible HDTV (High Definition Television). If this unit
is connected to an HDTV through other equipment, it
must also be 1080p compatible.
Press [OK] to show the following settings:
IP Address/DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.
24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When BD-Video images other than 24p are played,
images are output at 60p.
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
≥ 24p :
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
Internet Content Settings (ꢀ 18)
(Network Service)
Press [OK] to show the following settings:
Lock
You can restrict the usage of Network Service.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
VIERA Link
Set to use “HDAVI Control” function when connected with
MAC Address
Displays the MAC address of this unit.
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI
Control”.
Deep Color Output
This setting is for selecting whether to use Deep Color
output when a television that supports Deep Color is
connected.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
VQT3A92
24
Others
Remote Control Code
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”
so compared to when the setting is “Off” the following will
occur.
– Idle power consumption will increase. (about the power
consumption ꢀ 30)
Easy Setting
You can execute basic settings (“On-screen Language”, “TV
Aspect”, “Quick Start”)
Restore Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control Code”, “On-screen
Language”, “IP Address/DNS Settings”, “Proxy Server
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video
Ratings” etc. to the default settings.
System Information
Display firmware version of this unit.
Firmware Update (ꢀ 12)
Press [OK] to show the following settings:
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned
on and you can update it if necessary.
Update Now
You can update the firmware manually if a firmware
update is available.
VQT3A92
25
Reference
Troubleshooting guide
General operation
Before requesting service, please perform
the following steps.
To return to the factory preset.
¾
Select “Yes” in “Restore Default Settings” in the Setup
menu. (> 25)
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies.
To return all settings to the factory preset.
(> 12)
¾
1
Reset the unit as follows:
4
While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “08 FIn” is displayed on
the unit’s display.
Make the following checks and visit our
website for more information.
For USA :
Enter the model number.
For Canada :
4
2
3
Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
Or visit our website to find a service
center.
The remote control doesn’t work properly.
You can find a service center near you easily on our
¾
¾
Change the batteries for the remote control. (> 4)
The remote control and main unit are using different
codes. If “SEt ” is displayed on the unit’s display when
a button is pressed on the remote control, change the
code on the remote control. (> 25)
website.
Other support information:
“Customer Services Directory (United States and Puerto
Rico)” (> 33) or “Limited Warranty (Only for
CANADA)” (> 34).
The TV tuner mode is not displayed when
the TV is switched on.
The following do not indicate a problem with this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
¾
This phenomenon may occur, depending on the TV
setting, when “Quick Start” is set to “On”.
– Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
∫ Unit doesn’t respond to remote
You have forgotten your ratings password.
You want to cancel the ratings level.
control or front panel buttons.
Disconnect the power cord, wait 1 minute, then reconnect
the power cord.
¾
1
The ratings level returns to the factory preset.
While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “03 VL” is displayed on
the unit’s display.
Press [OK] on the remote control or [< OPEN/CLOSE]
on the unit.
∫ Cannot eject disc.
The unit may have a problem.
2
3
1
While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “06 FtO” is displayed on
the unit’s display.
Press [OK] on the remote control or [< OPEN/CLOSE]
on the unit.
2
3
This unit does not recognize the USB
connection correctly.
¾
If inserted during playback the USB device may not be
recognized by this unit.
¾
Disconnect and reconnect the USB cable. If it still does
not recognize the connection, turn the power of this unit
off and on again.
¾
¾
USB devices connected using a USB hub may not be
recognized by this unit.
If you connect USB HDD to this unit, use USB extension
cable that is supplied with the HDD.
VQT3A92
26
Picture
Playback
The images from this unit do not appear on
the television.
Picture is distorted.
Disc cannot be played.
¾
The disc is dirty. (ꢀ 4)
¾
An incorrect resolution is selected in “HDMI Resolution”.
Reset the setting as follows:
While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
Still pictures (JPEG) do not play back
normally.
1
¾
The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “04 PrG” is displayed on
the unit’s display.
Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
Set the item again. (ꢀ 24)
I can’t play back BD-Live.
2
3
¾
Confirm that this unit is connected to the broadband
Internet. (ꢀ 9)
¾
¾
Confirm the “BD-Live Internet Access” settings. (ꢀ 22)
Confirm a USB device is inserted into the USB port.
(ꢀ 13)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not output in bitstream, select “Yes” in “Restore
Default Settings” and make proper settings. (ꢀ 25)
Network
Video is not output in high-definition.
¾
Confirm that “HDMI Resolution” in the Setup menu is set
properly. (ꢀ 24)
I can’t connect to the network.
¾
Confirm the network connection and settings.
(ꢀ 9, 11, 24)
No subtitles.
¾
Check the operating instructions for each device and
connect accordingly.
¾
When progressive output is on, closed captions/subtitles
cannot be displayed.
The subtitles overlap closed captions
recorded on discs.
¾
Turn off the subtitles or turn off the closed caption
setting on the TV. (ꢀ 21)
A black band is displayed around the edge
of the screen.
The aspect ratio of the screen is abnormal.
¾
¾
Confirm the “TV Aspect” is set properly. (ꢀ 23)
Adjust the aspect setting on the television.
Audio
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio Output”
settings. (ꢀ 9, 23)
¾
To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (ꢀ 24)
VQT3A92
27
Messages
The following messages or service numbers appear on the
television or unit’s display when something unusual is
detected during startup and use.
On the television
Cannot play.
¾
You inserted an incompatible disc (Discs recorded in
PAL video, etc.).
Cannot display on this unit.
¾
You tried to play a non-compatible image.
No disc is inserted.
¾
The disc may be upside down.
$ This operation is not available.
¾
Some operations are unsupported by the unit. For
example;
– BD-Video: During playback, reverse slow-motion or
reverse frame-by-frame is not possible.
IP address is not set.
¾
The “IP Address” in “IP Address/DNS Settings” is “---.
---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and
“Default Gateway”. (Select the automatic address
acquisition if necessary.)
On the unit’s display
SEt
(“ ” stands for a number.)
¾
The remote control and main unit are using different
codes. Change the code on the remote control.
Press and hold [OK] and the
indicated number button at the
same time for more than 5
seconds.
H
or F
(“ ” stands for a number.)
¾
¾
There is something unusual.
Check the unit using the troubleshooting guide. If the
service number does not disappear, do the following.
Disconnect the plug from the AC outlet, wait a few
seconds, then reconnect it.
1
2
Press [POWER Í/I] to turn the power on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
VQT3A92
28
Supplemental information
∫ Display languages list
∫ Unit’s display list
This list only contains displays that are difficult to read.
Display Language Display Language Display Language
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
JPN
CHI
Japanese
Chinese
Korean
Malay
ARA
HIN
PER
IND
Arabic
Display
Reading
Display
Reading
Hindi
BYE
OPEN
German
Italian
KOR
MAL
VIE
Persian
Indonesian
Maori
READ
STOP
PLAY
SETUP
F99
Spanish
Dutch
Vietnamese MRI
THA
POL
CES
SLK
HUN
FIN
Thai
Polish
Czech
Slovak
Hungarian
Finnish
BUL
RUM
GRE
TUR
Bulgarian
Romanian
Greek
Swedish
Norwegian
Danish
NET
Turkish
Others
Portuguese
Russian
No PLAY
SET *
UPD-5*
STILLP
SLIDE
No UPDATE
START
FINISH
P-LIST
∫ Language code list
Language Code Language Code Language Code
REPEAT
No PLAY
UNLOCK
DISC
Abkhazian:
Afar:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
7185 Rhaeto-Romance:
7265
8277
No DISC
No READ
BD-J
Afrikaans:
Albanian:
Amharic
Arabic:
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
8279
8285
8377
8365
:
6577 Hungarian:
6582 Icelandic:
7289 Indonesian:
6583 Interlingua:
6589 Irish:
Armenian:
Assamese:
Aymara:
7378 Scots Gaelic: 7168
7365 Serbian:
8382
UNSUPPORT
7165 Serbo-Croatian: 8372
Azerbaijani:
Bashkir:
6590 Italian:
7384 Shona:
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
* “ ” stands for a number.
6665 Japanese:
6985 Javanese:
Kannada:
7465 Sindhi:
Basque:
7487 Singhalese:
7578 Slovak:
Bengali; Bangla:
6678 Kashmiri:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
7583 Slovenian:
7575 Somali:
7589 Spanish:
7579 Sundanese:
7585 Swahili:
7679 Swedish:
7665 Tagalog:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
Byelorussian: 6669 Latin:
Cambodian:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
7577 Latvian, Lettish: 7686 Tajik:
6765 Lingala:
9072 Lithuanian:
6779 Macedonian:
7282 Malagasy:
6783 Malay:
6865 Malayalam:
7876 Maltese:
6978 Maori:
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
7678 Tamil:
7684 Tatar:
7775 Telugu:
7771 Thai:
7783 Tibetan:
7776 Tigrinya:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
7778 Ukrainian:
7865 Urdu:
7869 Uzbek:
7879 Vietnamese:
7982 Volapük:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
7073 Nepali:
7082 Norwegian:
7089 Oriya:
7176 Pashto, Pushto: 8083 Welsh:
7565 Persian:
6869 Polish:
7065 Wolof:
8076 Xhosa:
8084 Yiddish:
8065 Yoruba:
8185 Zulu:
6976 Portuguese:
7576 Punjabi:
7178 Quechua:
Greenlandic:
Guarani:
VQT3A92
29
Specifications
File format
Signal system:
NTSC
Operating temperature range:
File format
Extension
Reference
i5 oC to i35 oC (i41 oF to i95 oF)
ID3 tags (Only titles and
the names of artists)
Operating humidity range:
MP3
“.MP3”, “.mp3”
10 % to 80 % RH (no condensation)
Video output:
Audio output:
1.0 Vp-p (75 ≠)/Pin jack:1 system
≥ MOTION JPEG and
Progressive JPEG is not
supported
2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors :
2 channel:1 system
HDMI AV output:
Type A (19 pin) : 1 system
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
This unit supports “HDAVI Control1” function.
USB slot:
Ethernet:
USB2.0 : 1 system
JPEG
“.JPG”, “.jpg”
10BASE-T/100BASE-TX : 1 system
LASER Specification
Class I LASER Product:
Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:No hazardous radiation is emitted with the
safety protection
“.MKV”, “.mkv” ≥ The video file and
subtitles text file are
Power supply:
Power consumption:
AC 120 V, 60 Hz
Approx. 12 W
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some MKV file may not
be played back,
depending on the video
Power consumption in standby mode: Approx. 0.1 W
Power consumption in quick start standby mode:
Approx. 3.3 W
Dimensions (WkDkH) Including the projecting parts:
430 mmk185 mmk35 mm
Subtitles text
file
“.SRT”, “.srt”,
“.SSA”, “.ssa”,
MKV
(Approx. 16 15/16zk7 5/16zk1 7/16z)
Mass (Weight):
Approx. 1.6 kg (3.52 lbs)
“.ASS”, “.ass”
resolution and frame
rate condition.
Specifications are subject to change without notice.
≥ With certain recording states and folder structures, the
play order may differ or playback may not be possible.
Audio information
The audio output differs depending on the settings on the
unit. (> 23, Digital Audio Output)
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
“Digital Audio Output”
Terminal
“PCM”*2
“Bitstream”
BD-Video :
7.1ch PCM*1
DVD-Video :
5.1ch PCM
HDMI AV Outputs using original
OUT
audio*1
*1
*2
When “BD-Video Secondary Audio” is set to “On”, the audio is output as
Dolby Digital, DTS Digital Surround or 5.1ch PCM.
The maximum possible number of Dolby sound is 2ch PCM.
VQT3A92
30
This product incorporates the following software:
ICU License - ICU 1.8.1 and later
(1) the software developed independently by or for Panasonic
Corporation,
COPYRIGHT AND PERMISSION NOTICE
(2) the software owned by third party and licensed to Panasonic
Corporation,
Copyright (c) 1995-2010 International Business Machines Corporation
and others
(3) the software licensed under the GNU General Public License,
Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL v2.1) and/or,
All rights reserved.
(5) open sourced software licensed under its applicable license terms
including but not limited to
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
“Software”), to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish, distribute,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, provided that the above copyright
notice(s) and this permission notice appear in all copies of the
Software and that both the above copyright notice(s) and this
permission notice appear in supporting documentation.
ICU License, c-arse license, gSOAP Public License 1.3b,
(6) Windows Media digital right management technology (WM-DRM)
licensed by Microsoft Corporation or its affiliates.
For the software categorized as (3) and (4), please refer to the terms
and conditions of GPL v2 and LGPL v2.1, as the case may be at
In addition, the software categorized as (3) and (4) are copyrighted by
several individuals. Please refer to the copyright notice of those
individuals at
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD
PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER
OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
The GPL/LGPL software is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to
any third party who contacts us at the contact information provided
below, for a charge no more than our cost of physically performing
source code distribution, a complete machine-readable copy of the
corresponding source code covered under GPL v2/LGPL v2.1.
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or
other dealings in this Software without prior written authorization of the
copyright holder.
Contact Information
Source code is also freely available to you and any other member of
the public via our website below.
All trademarks and registered trademarks mentioned herein are the
property of their respective owners.
For Open Source Software Programs categorized as (5), please refer
to the applicable license terms listed below and/or included in the
“License” menu on Product.
c-arse license
Copyright 1998 by the Massachusetts Institute of Technology.
Further, for WM-DRM categorized as (6), please be aware of the
following.
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of M.I.T. not be used in
advertising or publicity pertaining to distribution of the software without
specific, written prior permission.
(a) This product is protected by certain intellectual property rights of
Microsoft.
Use or distribution of this technology outside of this product is
prohibited without a license from Microsoft or an authorized Microsoft
subsidiary.
(b) Content providers are using the digital rights management
technology for Windows Media contained in this device (“WM-DRM”) to
protect the integrity of their content (“Secure Content”) so that their
intellectual property, including copyright, in such content is not
misappropriated. This device uses WM-DRM software to play Secure
Content (“WM-DRM Software”). If the security of the WM-DRM
Software in this device has been compromised, owners of Secure
Content (“Secure Content Owners”) may request that Microsoft revoke
the WM-DRM Software’s right to acquire new licenses to copy, display
and/or play Secure Content.
Revocation does not alter the WM-DRM Software’s ability to play
unprotected content. A list of revoked WM-DRM Software is sent to
your device whenever you download a license for Secure Content from
the Internet or from a PC. Microsoft may, in conjunction with such
license, also download revocation lists onto your device on behalf of
Secure Content Owners.
M.I.T. makes no representations about the suitability of this software
for any purpose. It is provided “as is” without express or implied
warranty.
gSOAP Public License Version 1.3b
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A.
van Engelen, Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY
GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
VQT3A92
31
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
such as hotel, office, restaurant, or other business or rental use of the
If your product does not work properly because of a defect in materials product, or service by anyone other than a Factory Service Center or
or workmanship, Panasonic Consumer Electronics Company (referred other Authorized Servicer, or damage that is attributable to acts of
to as “the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent
value product, or (c) refund your purchase price. The decision to
repair, replace or refund will be made by the warrantor.
God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
Product or Part Name
Parts
Labor
(As examples, this excludes damages for lost time, travel to and from
the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for
illustration only.)
Blu-ray Disc Player, Portable
Blu-ray Disc Player
1 year
90 days
Blu-ray Home Theater System
1 year
1 year
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
DVD Player, Portable DVD Player 1 year
90 days
90 days
DVD Recorder
1 year
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied
warranty lasts, so the exclusions may not apply to you.
Rechargeable Batteries (pack),
DVD-RAM Disc (defective exchange)
10 days
Not
Applicable
This warranty gives you specific legal rights and you may also have
During the “Labor” warranty period there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts.
This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This warranty is extended only to the
original purchaser of a new product which was not sold “as is”.
other rights which vary from state to state. If a problem with this
product develops during or after the warranty period, you may contact
your dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,
please ship the product prepaid to:
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
or, contact us via the web at:
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
McAllen, TX 78503
When shipping the unit, carefully pack, include all accessories, and
send it prepaid, adequately insured and preferably in the original
carton. When shipping Lithium Ion batteries please visit our Web Site
providing the most up to date information. Include a letter detailing the
complaint, a return address and provide a daytime phone number
where you can be reached. A valid registered receipt is required under
the Limited Warranty.
For hearing or speech impaired TTY users, TTY:
1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
Or, send your request by E-mail to:
You may also contact us directly at:
Limited Warranty Limits And Exclusions
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage,
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
For hearing or speech impaired TTY users, TTY:
1-866-605-1277
modification, introduction of sand, humidity or liquids, commercial use
As of December 2010
User memo:
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
MODEL NUMBER
SERIAL NUMBER
TELEPHONE NUMBER
VQT3A92
33
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a
period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The
decision to repair, replace or refund will be made by Panasonic Canada Inc.
Technics Audio Product - One (1) year, parts and labour
Panasonic BD/DVD Product - One (1) year, parts and labour
Panasonic Audio Receivers - One (1) year, parts and labour
Home Theater Systems Product - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand
product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which
product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER
PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and
tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which
are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse,
neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial
use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an
Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of
or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for
illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the
exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you
specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE
Customer Care Centre:
Telephone #: 1-800-561-5505
Fax #: (905) 238-2360
PRODUCT REPAIRS
Please locate your nearest Authorized Servicentre.
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
VQT3A92
34
Referencia rápida en
español
Reproducción básica
(Spanish Quick Reference)
Preparación
Encienda el televisor y seleccione la entrada de vídeo
adecuada en el televisor.
Conexiones básicas
1 Pulse [Í POWER] para encender la
unidad.
Conexión a un televisor
compatible con HDMI
Después de conectar su nuevo reprodutor y pulsar el
botón de encendido, aparecerá la pantalla de la
configuración básica.
HDMI IN
2 Inserte el medio.
Inicia la reproducción
10BASE-T/100BASE-TX
Cable HDMI
(incluido : DMP-BD755)
LAN
Pulse [1PLAY].
Conexión a un televisor con
un cable para audio/vídeo
Parada
Pulse [∫STOP].
La posición de detención se memoriza.
Cable de audio/
vídeo
Función de reanudación de la reproducción
Pulse [1PLAY] para reiniciar la reproducción desde esta posición.
≥ La posición se borra si se abre la bandeja o se pulsa
[∫STOP] varias veces para visualizar “StOP” en el visor
de la unidad.
10BASE-T/100BE-TX
R
L
AUDIO IN VIDEO IN
LAN
10BASE-T/100BASE-TX
≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
LAN
Conexión a un televisor compatible
con HDMI y a un amplificador/
receptor compatible con HDMI
Pausa
Pulse [;PAUSE].
≥ Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la
reproducción.
HDMI IN
Búsqueda/Cámara lenta
Cable HDMI
(incluido : DMP-BD755)
Búsqueda
E-TX
Durante la reproducción, pulse [SEARCH6] o
[SEARCH5].
≥ Música y MP3: La velocidad está fija en un paso.
Altavoces multicanal
Amplificador/Receptor
Cámara lenta
Durante la pausa, pulse [SEARCH5].
Cable HDMI
HDMI IN
(ARC)
HDMI OUT
(ARC)
La velocidad aumenta hasta 5 pasos.
≥ Pulse [1PLAY] para recuperar la velocidad de
reproducción normal.
Conecte el cable de
alimentación de CA por último
Salto
A una toma de corriente doméstica
Durante la reproducción o la pausa, pulse [:] o
[9].
Salta hasta el título, capítulo o pista que desee reproducir.
≥ Cada pulsación aumenta el número de saltos.
10BASE-T/100BASE-TX
AC IN
Cable de alimentación de CA (incluido)
LAN
≥ Conéctelo cuando haya realizado el resto de conexiones.
Ahorro de energía
Esta unidad consume una pequeña cantidad de energía
aunque esté ajustada en el modo de espera (Accionamiento
rápido : Desactivado, aprox. 0,1 W). Para ahorrar energía
cuando no vaya a utilizar la unidad durante mucho tiempo,
desenchúfela de la toma de corriente.
VQT3A92
35
Index
A Audio
N Network
Connection . . . . . . . . . . . . . . . . 9
24p . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing audio . . . . . . . . . . . . 14
Language . . . . . . . . . . . . . . 21, 22
B BD-Live . . . . . . . . . . . . . . . . . . . . 16
D DLNA . . . . . . . . . . . . . . . . . . . . . . 19
F File format. . . . . . . . . . . . . . . . . . 30
Firmware update . . . . . . . . . . . . 12
L LAN . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting . . . . . . . . . . . . . . . . 11, 24
Network Service . . . . . . . . . . . . 18
P Playlists . . . . . . . . . . . . . . . . . . . 15
Pop-up menu . . . . . . . . . . . . . . . 14
Q Quick Start. . . . . . . . . . . . . . . . . 25
R Restore Default Settings. . . . . . 25
Resume play function. . . . . . . . 14
S Subtitle. . . . . . . . . . . . . . . . . . . . 21
U USB device . . . . . . . . . . . . . . . . . 7
Language
Audio . . . . . . . . . . . . . . . . . 21, 22
Menu . . . . . . . . . . . . . . . . . . . . 22
On-screen. . . . . . . . . . . . . . . . . 23
Soundtrack . . . . . . . . . . . . . . . . 21
Subtitle . . . . . . . . . . . . . . . . 21, 22
V VIERA LinkTM
“HDAVI ControlTM”. . . . . . . . . . . 20
USA Only: Disposal may be regulated in your community
due to Environmental considerations. For disposal or
recycling information, please visit Panasonic Website:
or call 1-888-769-0149.
Information on Disposal in other Countries outside
the European Union
As an ENERGY STAR® Partner, Panasonic
has determined that this product meets the
ENERGY STAR® guidelines for energy
efficiency.
For Canada only: The word “Participant” is
used in place of the word “Partner”.
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and ask
for the correct method of disposal.
Panasonic Consumer Electronics
Panasonic Canada Inc.
pr
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
C Panasonic Corporation 2010
Printed in China
VQT3A92-1
F1210SK1021
|