DIGITAL CAMERA
FE-4040/FE-4020/X-940
Instruction Manual
●
Thank you for purchasing an Olympus digital camera. Before you start
to use your new camera, please read these instructions carefully to
enjoy optimum performance and a longer service life. Keep this manual
in a safe place for future reference.
●
●
●
We recommend that you take test shots to get accustomed to your
camera before taking important photographs.
In the interest of continually improving our products, Olympus reserves
the right to update or modify information contained in this manual.
The screen and camera illustrations shown in this manual were
produced during the development stages and may differ from the
actual product. Unless otherwise specified, the explanation about these
illustrations is provided for FE-4040.
Camera Settings
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Shutter button (p. 14)
Zoom buttons (p. 16)
qbutton (switch between
shooting and playback) (p. 15)
m button (p. 4)
E button (menu guide) (p. 19)
Arrow pad
The symbols FGHI displayed for image
selections and settings indicate that the arrow
pad is to be used.
F (up) /
INFO button (change
information display) (p. 16, 19)
X
Y
M
D
TIME
Y/M/D
2010.02.26 12:30
4/30
H (left)
I (right)
MENU
OK
CANCEL
SET
14M
NORM
FILE
100 0004
’10/02/26 12:30
H button
(p. 12)
OK
PRINT
MORE
SINGLE PRINT
G (down) /
D button (erase) (p. 18)
EN
3
Using the Menu
Use the menu to change camera settings such as the shooting mode.
Press the m button to display the function menu. The function menu can be used to set frequently
used shooting and playback functions such as shooting mode.
Selected option
Shooting
Playback
Shooting
mode
PROGRAM AUTO
SLIDESHOW
PERFECT FIX
EDIT
P
ERASE
Function
menu
0.0
WB
AUTO
ISO
AUTO
14M
o [SETUP]
SETUP
4
menu
To select the shooting mode
Use FG to select a menu and press
Use HI to select a shooting mode and press
the H button.
the H button.
To select the function menu
Use FG to select a menu and use HI to
select a menu option. Press the H button to
set the function menu.
In the [SETUP] menu, various camera functions can be set,
including shooting and playback functions not displayed in the
function menu, and other settings such as date, time and screen
display.
1
2
Select [SETUP] and then press the H
4
Use FG to select the desired submenu 2
and then press the H button.
button.
● The [SETUP] menu is displayed.
● Once a setting is selected, the display returns
to the previous screen.
COMPRESSION NORMAL
AF MODE
FINE ZOOM
R
FACE/iESP
OFF
There may be additional operations.
“Menu Settings” (p. 27 to 36)
1
2
3
OFF
IMAGE STABILIZER
ICON GUIDE
ON
POWER SAVE
ON
ON
MENU
OK
SET
EXIT
1
2
3
Press H to highlight the page tabs. Use
FG to select the desired page tab and
press I.
MENU
OK
SET
EXIT
Page tab
Submenu 1
5
Press the m button to complete the
setting.
POWER SAVE
OFF
POWER SAVE
OFF
Some functions cannot be used in some
shooting modes. In such cases, the
following message is displayed after
setting.
1
2
3
1
2
3
MENU
OK
MENU
OK
SET
EXIT
SET
EXIT
COMPRESSION NORMAL
AF MODE
FACE/iESP
OFF
FINE ZOOM
3
Use FG to select the desired submenu 1
and then press the H button.
Submenu 2
3
CONFLICTING SETTINGS
ICON GUIDE
ON
MENU
OK
SET
EXIT
POWER SAVE
OFF
POWER SAVPOWERSAVE
OFF
ON
1
2
3
1
2
3
MENU
OK
MENU
OK
SET
EXIT
SET
BACK
4
EN
Menu Index
Menus for Shooting Functions
PROGRAM AUTO
1
2
3
4
5
6
7
8
P
9
COMPRESSION NORMAL
IMAGE SIZE
FRAME RATE
IS MOVIE MODE
R
VGA
30fps
OFF
ON
AF MODE
FINE ZOOM
R
FACE/iESP
OFF
1
2
3
1
2
3
OFF
IMAGE STABILIZER
ICON GUIDE
ON
0.0
ON
WB
AUTO
ISO
AUTO
MENU
OK
MENU
OK
SET
EXIT
SET
EXIT
14M
4
FRAME RATE (Movies).....p.27
AF MODE..........................p.28
FINE ZOOM ......................p.28
IMAGE STABILIZER (Still
1 Shooting mode
P (PROGRAM AUTO).......p.14
4 Self-timer...........................p.24
5 Exposure compensation....p.24
6 White balance....................p.25
7 ISO ....................................p.25
8 Image size (Still images) ...p.26
9 o (SETUP) X
M
(iAUTO)....................p.20
N (DIS MODE)*1 .............p.20
s (SCENE MODE) ......p.20
P (MAGIC FILTER).....p.21
~ (PANORAMA)...............p.22
A (MOVIE).......................p.15
2 Flash..................................p.23
3 Macro ................................p.23
images)*2/IS MOVIE MODE
(Movies).............................p.28
R (Still images)..................p.29
R (Movies).........................p.29
ICON GUIDE.....................p.29
z
(Shooting)/A (Movie)
IMAGE SIZE (Movies).......p.27
COMPRESSION (Still images)
.......................................p.27
*1
Available in the FE-4020/X-940 only.
Available in the FE-4040 only.
*2
Menus for Playback, Editing, and Printing Functions
SLIDESHOW
PERFECT FIX
EDIT
1
2
3
4
5
PRINT ORDER
0
y
1
2
3
R
ERASE
MENU
OK
SET
EXIT
SETUP
1 SLIDESHOW.....................p.30
2 PERFECT FIX...................p.30
3 EDIT ..................................p.30
4 ERASE ..............................p.30
5 o (SETUP) X q(Playback)
PRINT ORDER..................p.31
0(Protect) .....................p.31
y (Rotate).........................p.31
R (Add sound to still images)
.......................................p.31
Menus for Other Camera Settings
1 r (Settings 1)
MEMORY FORMAT/
2 s (Settings 2)
FORMAT
PW ON SETUP .................p.33
SOUND SETTINGS ..........p.34
PIXEL MAPPING...............p.34
s (Monitor).....................p.34
X(Date/time)..................p.34
WORLD TIME....................p.35
VIDEO OUT.......................p.35
BACKUP
FORMAT............................p.32
BACKUP............................p.32
W (Language).................p.32
RESET...............................p.32
USB CONNECTION..........p.33
qPOWER ON ................p.33
W
ENGLISH
1
2
3
1
2
3
RESET
USB CONNECTION
q POWER ON
SAVE SETTINGS
STORAGE
NO
NO
SAVE SETTINGS..............p.33 3 t (Settings 3)
MENU
OK
EXIT
SET
POWER SAVE...................p.36
EN
5
Names of Parts
Camera unit
5
6
1
2
7
3
8
9
4
10
FE-4020/X-940
1
2
8
9
3
10
4
1
2
3
4
5
Connector cover.......... p. 11, 12, 35, 37
Multi-connector ........... p. 11, 12, 35, 37
Strap eyelet.....................................p. 7
Battery/card compartment cover...p. 10
Self-timer lamp..............................p. 24
6
7
8
9
Flash .............................................p. 23
Lens ........................................p. 46, 59
Microphone .............................p. 29, 31
Speaker
10 Tripod socket
6
EN
1
2
6
7
8
3
4
5
9
10
1
2
Shutter button ...............................p. 14
7
8
9
Indicator lamp ......................... p. 11, 12
H button (OK)..........................p. 3, 12
Arrow pad........................................p. 3
INFO button (change information
n button ........................p. 12, 14
3 qbutton (switch between shooting
and playback)................................p. 15
4
5
6
Monitor....................................p. 14, 42
m button...................................p. 4
Zoom buttons................................p. 16
display).............................p. 16, 19
D button (erase) ....................p. 18
10 E button (menu guide).................p. 19
Attaching the camera strap
Pull the strap tight so that it does not come loose.
EN
7
Monitor
Shooting mode display
1
2
1
2
P
18
4
5
6
7
3
4
0.0
5
WB
17
16
17
16
0.0
6
AUTO
WB
7
AUTO
ISO
8
AUTO
14M
9
VGA
4
NORM
0:34
ON
ON
10
10
15 14 13 12
15 9 13 12 11
Movie
1/100 F2.6
20 19
Still image
1
2
3
Battery check ................................ p. 11
Shooting mode........................p. 14, 20
Flash .............................................p. 23
Flash standby/flash charge...........p. 42
Macro............................................p. 23
Self-timer.......................................p. 24
Exposure compensation ...............p. 24
White balance ...............................p. 25
ISO................................................p. 25
Image size...............................p. 26, 27
12 World time.....................................p. 35
13 Image stabilization (still images)*1/
Digital image stabilization (movies)
....................................................p. 28
14 Compression (still images)............p. 27
15 Number of storable pictures (still
4
5
6
7
8
9
images) .........................................p. 14
Continuous recording length (movies)
....................................................p. 15
16 Current memory............................p. 48
17 AF target mark ..............................p. 14
18 Camera shake warning....................... -
19 Aperture value...............................p. 14
20 Shutter speed................................p. 14
10 [SETUP] menu............................p. 4, 5
11 Recording with sound (movies)
....................................................p. 29
*1
Available in the FE-4040 only.
8
EN
Playback mode display
● Normal display
1
2
3 4
5 6
1
4
10
4/30
00:12/00:34
6
’10/02/26 12:30
15
Still image
● Detailed display
Movie
1
2
3 4
5 6
7
8
9
10 11
10
4/30
1/1000 F2.6
2.0
ISO WB
12
13
P
AUTO AUTO
18
17
1/1000 F2.6
2.0
ISO WB
14M
NORM
P
AUTO AUTO
FILE
14M
14
15
NORM
100 0004
FILE
100 0004
’10/02/26 12:30
’10/02/26 12:30
16
1
2
Battery check ................................ p. 11
Print reservation/
9
Aperture value...............................p. 14
10 ISO................................................p. 25
11 Exposure compensation ...............p. 24
12 White balance ...............................p. 25
13 Image size...............................p. 26, 27
14 File number......................................... -
15 Date and time................................p. 12
16 Compression (still images)............p. 27
Frame rate (movies)......................p. 27
17 Macro............................................p. 23
18 Flash .............................................p. 23
number of prints...................p. 40/p. 39
Protect...........................................p. 31
Adding sound..........................p. 29, 31
Current memory............................p. 48
Frame number/total number of images
(still images)..................................p. 16
Elapsed time/total recording time
3
4
5
6
(movies) ........................................p. 17
Shooting mode........................p. 14, 20
Shutter speed................................p. 14
7
8
EN
9
Preparing the Camera
Inserting the battery and the
SD/SDHC memory card (sold
separately)
Insert the battery by putting in the ▼
marked side first, with the B (FE-4040)/
C (FE-4020/X-940) mark toward the battery
lock knob.
Damage to the battery exterior (scratches,
etc.) may produce heat or an explosion.
Always use SD/SDHC memory cards with
this camera. Do not insert any other types of
memory card.
Insert the battery while sliding the battery
lock knob in the direction of the arrow.
Slide the battery lock knob in the direction
of the arrow to unlock, and then remove the
battery.
1
2
1
Turn off the camera before opening the
battery/card compartment cover.
When using the camera, be sure to close
the battery/card compartment cover.
Battery/card compartment cover
Insert the card straight until it clicks into
place.
Do not touch the contact area directly.
2
FE-4040
FE-4020/X-940
3
1
2
This camera allows the user to take pictures
using the internal memory even when no
SD/SDHC memory card (sold separately) is
inserted. “Using an SD/SDHC memory card”
(p. 47)
Battery lock knob
“Number of storable pictures (still images)/
Continuous recording length (movies) in the
internal memory and SD/SDHC memory
cards” (p. 49)
Write-protect switch
Contact area
To remove the SD/SDHC memory card
1
2
Press the card in until it clicks and comes
out slightly, then grab the card and pull it
out.
10 EN
Charging the battery with the
supplied USB-AC adapter
The battery is not fully charged at the time
of purchase. Before use, be sure to charge
the battery until the indicator lamp turns off
(up to 3 hours).
The included F-2AC USB-AC adapter
(with an AC cable or plug-in type; hereafter
referred to as AC adapter) differs depending
on the region where you purchased the
camera. If you received a plug-in type AC
adapter, plug it directly into an AC outlet.
If the indicator lamp does not light, the
camera is not correctly connected or the
battery, camera, or AC adapter may be
damaged.
For details on the battery and the AC
adapter, see “Battery and AC adapter
(included)” (p. 46).
The included AC adapter has been designed
to be used only for charging. Make sure
that operations such as shooting, viewing
images and so on are not being used while
the AC adapter is connected to the camera.
When to charge the batteries
Charge the battery when the error message
shown below appears.
Example: AC adapter with an AC cable
Flashes in red
1
Multi-connector
BATTERY EMPTY
Connector
cover
2
4
Monitor top left
Error message
FE-4040
USB cable
(supplied)
FE-4020/X-940
1
3
AC outlet
2
Indicator lamp
On: Charging
Off: Charged
EN 11
Installing the supplied
computer software (ib)
2
3
Connect the camera to the
computer.
After checking the system requirements, follow
the instructions below to connect the camera to
a computer and install the supplied computer
software (ib).
Follow the on-screen instructions
on your computer.
Operation guide
System requirements
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
Operation guides displayed at the bottom of the
screen indicate that the m button, H button,
or zoom buttons should be used.
Connecting the camera
COMPRESSION NORMAL
Multi-connector
AF MODE
FINE ZOOM
R
FACE/iESP
OFF
1
2
3
OFF
IMAGE STABILIZER
ICON GUIDE
ON
ON
Connector
cover
MENU
OK
SET
EXIT
OK
SET
Indicator lamp
FE-4040
OK
MENU
ERASE/CANCEL
Operation guide
FE-4020/X-940
Setting the date, time and
time zone
The date and time set here are saved to image
file names, date prints, and other data.
USB cable
(supplied)
1
Press the n button to turn on
the camera.
Computer (on
and running)
● The date and time setting screen is displayed
when the date and time are not set.
X
For information on using the computer
software (ib), see the software’s online help.
Y
M
D
TIME
---- -- -- -- --
.
1
Y/M/D
.
:
Insert the supplied CD in a CD-ROM
drive.
● A setup screen will appear on the computer
monitor.
MENU
CANCEL
Date and time setting screen
If the setup window is not displayed,
select “My Computer” (Windows XP) or
“Computer” (Windows Vista/Windows 7)
from the start menu. Double-click the
icon for the CD-ROM drive to open the
setup CD window and then double-click
“CameraInitialSetup.exe”.
12 EN
Changing the display language
2
3
4
Use FG to select the year for [Y].
The language for the menu and error messages
displayed on the monitor is adjustable.
X
Y
M
D
TIME
1
Display the [SETUP] menu.
-- -- -- --
.
“Using the Menu” (p. 4)
Y/M/D
2010.
:
2
r
Use FG to select the
(Settings
MENU
CANCEL
1) tab and then press I.
FORMAT
BACKUP
W
Press I to save the setting for [Y].
ENGLISH
1
RESET
X
2
3
USB CONNECTION
q POWER ON
SAVE SETTINGS
STORAGE
NO
Y
M
D
TIME
NO
-- -- -- --
.
Y/M/D
MENU
OK
2010.
:
EXIT
SET
MENU
CANCEL
3
4
5
Use FG to select [W] and press
the H button.
As in Steps 2 and 3, use FGHI
and the H button to set [M]
(month), [D] (day), [TIME] (hours
and minutes), and [Y/M/D] (date
order).
Use FGHI to select your
language and press the H button.
Press the m button.
For a more accurate setting, press the
H button when the time signal hits
00 seconds while setting the minutes.
To change the date and time, adjust the
setting from the menu. [X] (Date/time)
(p. 34)
5
Use HI to select your home time
zone and press the H button.
● Use FG to turn daylight saving time ([SUMMER])
on or off.
’10.02.26.12:30
Seoul
Tokyo
OK
SET
SUMMER
The menus can be used to change the
selected time zone. [WORLD TIME] (p. 35)
EN 13
Shooting, Viewing, and Erasing
Shooting with the optimum
2
Hold the camera and compose the
shot.
aperture value and shutter
speed [PROGRAM AUTO]
In this mode, automatic shooting settings are
activated while also allowing changes to a wide
range of other shooting menu functions, such
as exposure compensation, white balance, etc.
as needed.
Monitor
Horizontal grip
1
Press the n button to turn on
the camera.
[PROGRAM AUTO] indicator
P
Vertical grip
0.0
When holding the camera, take care not to
cover the flash with your fingers, etc.
WB
AUTO
ISO
AUTO
14M
3
Press the shutter button halfway
down to focus on the subject.
● When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
4
Number of storable still pictures (p. 49)
Monitor
(standby mode screen)
If the [PROGRAM AUTO] indicator is not
displayed, press the m button to display
the function menu and then set the shooting
mode to P. “Using the Menu” (p. 4)
● The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
AF target mark
Current shooting mode display
P
PROGRAM AUTO
P
Press halfway
0.0
WB
AUTO
1/400 F2.6
Shutter speed Aperture value
“Focusing” (p. 44)
ISO
AUTO
14M
4
Press the n button again to turn off
the camera.
14 EN
4
3
To take the picture, gently press
the shutter button all the way down
while being careful not to shake the
camera.
Press the shutter button halfway
down to focus on the subject, and
gently press the button all the way
down to start recording.
P
Press
halfway
Press fully
0:34
1/400 F2.6
REC
0:00
Press fully
Image review screen
To view images during shooting
Continuous
recording
length (p. 49)
0:34
Pressing the qbutton enables playback of
images. To return to shooting, either press
the qbutton or press the shutter button
halfway down.
REC
0:00
Current length
Lights up red when recording
Shooting movies [MOVIE]
4
Gently press the shutter button all
the way down to stop recording.
1
Press the m button to display
the function menu screen.
Sound will also be recorded.
During sound recording, only the digital
zoom can be used. To record a movie with
optical zoom, set [R] (movies) (p. 29) to
[OFF].
PROGRAM AUTO
P
0.0
WB
AUTO
ISO
AUTO
14M
4
2
Use HI to set the shooting mode
to A and then press the H button.
[MOVIE] indicator
0.0
WB
AUTO
VGA
0:34
EN 15
Using the zoom
Changing the shooting
information display
Pressing the zoom buttons adjusts the shooting
range.
The display of the screen information can
be changed to best match the situation, for
example, the need for a clear view of the screen
or for making a precise composition by using the
grid display.
Pressing the wide
(W) button
Pressing the telephoto
(T) button
1
Press F (INFO).
● The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 8)
Zoom bar
P
P
0.0
0.0
WB
WB
AUTO
AUTO
Normal
ISO
ISO
AUTO
AUTO
14M
14M
P
4
4
Optical zoom: 4x
Digital zoom: 4x
0.0
WB
AUTO
No information
ISO
AUTO
14M
When shooting with the camera zoomed in,
select [ON] for [IMAGE STABILIZER] (p. 28)
(FE-4040) or select [DIS MODE] (p. 20) for
the shooting mode (FE-4020/X-940).
4
Detailed
P
To take larger images without reducing
image quality [FINE ZOOM] (p. 28)
0.0
WB
AUTO
ISO
AUTO
The zoom bar appearance identifies the
14M
4
NORM
status of the fine zoom/digital zoom.
When using optical
zoom and digital
zoom
Viewing images
Digital zoom
range
Optical zoom
range
1
Press the q button.
When using fine
Number of frames/
Total number of images
zoom
Fine zoom range
4/30
’10/02/26 12:30
Playback image
16 EN
Operations during movie playback
2
Use HI to select an image.
Displays
previous
image
Displays
next image
Hold I to fast forward and hold H to
reverse.
Elapsed time/
Total recording
time
00:12/00:34
The display size of the images can be
changed. “Index view and close-up view”
(p. 18)
During playback
Press the H button to pause
playback. To resume playback
during pause, fast forward, or
rewind, press the H button.
Pausing and
resuming
playback
To play sound recordings
To play sound recorded with an image,
select the image and press the H button. A
! icon appears on images with which sound
has been recorded.
Press I to fast forward. Press
Fast forward I again to increase the fast
forward speed.
[R] (still images) (p. 29, 31)
Press H to rewind. The
Rewind
rewinding speed increases
each time H is pressed.
Adjusting the Use FG to adjust the
volume
volume.
Operations during pausing playback
During audio playback
To play back movies
Select a movie, and press the H button.
00:14/00:34
4/30
During pause
Press F to display the first
Cueing
frame and press G to display
the last frame.
Advancing
Press I or H to advance or
and rewinding rewind one frame at a time.
OK
MOVIE PLAY
’10/02/26 12:30
one frame at Hold I or H pressed for
Movie
continuous advance or rewind.
a time
Resuming
playback
Press the H button to resume
playback.
To stop movie playback
Press the m button.
EN 17
Erasing images during
Index view and close-up view
playback (Single image erase)
Index view enables quick selection of a desired
image. Close-up view (up to 10x magnification)
allows checking of image details.
1
Display the image you want to erase
and press G ( ).
D
1
Press the zoom buttons.
ERASE
ALL ERASE
SEL. IMAGE
ERASE
Single-image view
Close-up view
4/30
4/30
W
T
CANCEL
MENU
OK
BACK
SET
’10/02/26 12:30
’10/02/26 12:30
2
Press FG to select [ERASE], and
press the H button.
W
T
[ALL ERASE] (p. 30) and [SEL. IMAGE]
(p. 30) can be used to erase multiple images
at the same time.
Index view
’10/02/26
2
4
W
T
’10/02/26
2
4
To select an image in index view
Use FGHI to select an image, and press
the H button to display the selected image
in single-image view.
To scroll an image in close-up view
Use FGHI to move the viewing area.
18 EN
Changing the image
information display
Shooting information settings displayed on the
screen can be changed.
1
Press F (INFO).
● The displayed image information changes in
the order shown below each time the button is
pressed.
Normal
10
4/30
No information
’10/02/26 12:30
Detailed
10
4/30
1/1000 F2.6
2.0
ISO WB
P
AUTO AUTO
14M
NORM
FILE
100 0004
’10/02/26 12:30
Using the menu guide
If the E button is pressed while settings are
being made in the playback function or [SETUP]
menu, a description of the selected option is
displayed.
“Using the Menu” (p. 4)
EN 19
Using Shooting Modes
Reducing blur on shooting
The shooting mode can be selected from
the function menu in the following order:
M, N (Available in the FE-4020/X-940
,
P
[DIS MODE] (FE-4020/X-940)
This mode enables the user to reduce blur
that is caused by camera shake and subject
movement.
only), s, P, ~, and A.
“Using the Menu” (p. 4)
Shooting with automatic
settings [iAUTO]
1
Set the shooting mode to N.
[DIS MODE] indicator
According to the scene, the camera
automatically selects the optimal shooting
mode from [PORTRAIT]/[LANDSCAPE]/
[NIGHT+PORTRAIT]/[SPORT]/[MACRO]. This
is a fully automatic mode that allows the user
to take pictures using the best mode for the
shooting scene simply by pressing the shutter
button.
0.0
WB
AUTO
14M
4
1
Set the shooting mode to M.
Using the best mode for the
The icon changes depending on the scene
that the camera automatically selects.
shooting scene [SCENE MODE]
1
Set the shooting mode to s.
SCENE MODE
14M
4
0.0
WB
AUTO
14M
In some cases, the camera may not select
the desired shooting mode.
4
When the camera cannot identify which is
the optimal mode, [PROGRAM AUTO] will
be selected.
2
Press G to go to the submenu.
PORTRAIT
0.0
WB
AUTO
14M
4
20 EN
Shooting with special effects
[MAGIC FILTER]
3
Use HI to select the best shooting
mode for the scene, and press the
H button.
Add an artistic effect to your photo by selecting
the desired magic filter.
1
Set the shooting mode to P.
MAGIC FILTER
0.0
WB
AUTO
14M
4
0.0
Icon indicating [SCENE MODE]
that is set
WB
AUTO
14M
4
In [SCENE MODE], the optimum shooting
settings are pre-programmed for specific
shooting scenes. For this reason, some
settings cannot be changed in some modes.
2
3
Press G to go to the submenu.
POP ART
Option
Application
BPORTRAIT/FLANDSCAPE/
GNIGHT SCENE*1/
MNIGHT+PORTRAIT/
CSPORT/NINDOOR/
WCANDLE*1/
RSELF PORTRAIT/
SSUNSET*1/XFIREWORKS*1/
VCUISINE/dDOCUMENTS/
PET
The camera
takes a picture
using the
optimum settings
for the scene
conditions.
0.0
WB
AUTO
14M
Use HI to select the desired effect
and then press the H button to set.
*1
When the subject is dark, noise reduction is
automatically activated. This approximately doubles
the shooting time during which no other pictures can
be taken.
To take pictures of a moving subject
like a pet ([ PET])
0.0
1Use HI to select [ PET], and press
WB
AUTO
the H button to set.
14M
2Hold the camera to align the AF target
mark on the subject and press the H
button.
4
Icon indicating [MAGIC FILTER]
that is set
● When the camera recognizes the subject,
the AF target mark automatically tracks the
subject movement to focus on it continuously.
“To focus on a moving subject continuously
(AF Tracking)” (p. 28).
Shooting mode
Option
[POP ART
\PIN HOLE
]FISH EYE
@DRAWING
MAGIC FILTER
In [MAGIC FILTER], the optimum shooting
settings are pre-programmed for each
scene effect. For this reason, some settings
cannot be changed in some modes.
EN 21
Creating panoramic images
[PANORAMA]
3
Press the shutter button to take the
first frame, and then compose the
second shot.
Take pictures that can be joined to form a
panorama using the ib computer software.
Before first
The focus, exposure (p. 24), zoom position
(p. 16), and white balance (p. 25) are locked
at the first frame.
shot
1
2
The flash (p. 23) is fixed to $(FLASH OFF)
mode.
1
Set the shooting mode to ~.
MENU
BACK
PANORAMA
0.0
WB
After first
AUTO
ISO
shot
AUTO
14M
4
1
2
2
Use FGHI to select the pan
direction.
MENU
EXIT
● After the first shot, the area shown in the
white frame reappears on the side of the
display opposite the pan direction. Frame
subsequent photographs so that they overlap
with the image on the monitor.
4
Repeat Step 3 until the number
of desired frames is taken, and
then press the m button when
finished.
Panorama shooting is possible for up to
10 frames.
For information on making panoramas,
refer to the online help for the ib computer
software.
22 EN
Using Shooting Functions
Shooting closeups
“Using the Menu” (p. 4)
(Macro shooting)
Using the flash
This function enables the camera to focus and
shoot subjects at close distances.
The flash functions can be selected to best
match the shooting conditions.
1
Select the macro option in the
shooting function menu.
1
Select the flash option in the
shooting function menu.
P
P
OFF
FLASH AUTO
0.0
WB
AUTO
0.0
ISO
AUTO
WB
AUTO
14M
ISO
AUTO
4
14M
4
2
Use HI to select the setting
option, and press the H button to
set.
2
Use HI to select the setting
option, and press the H button to
set.
Option
Description
OFF
Macro mode is deactivated.
Option
Description
This enables shooting as close as
20 cm/7.9 in.*1 (60 cm/23.6 in.*2) to
the subject.
The flash fires automatically in
low-light or backlight conditions.
FLASH AUTO
MACRO
Pre-flashes are emitted to reduce
the occurrence of red eye in your
photos.
This enables shooting as close as
4 cm/1.6 in. to the subject.
REDEYE
SUPER MACRO*3
*1
*2
*3
The flash fires regardless of the
available light.
When the zoom is at the widest (W) position.
When the zoom is at the most telephoto (T) position.
The zoom is automatically fixed.
FILL IN
FLASH OFF
The flash does not fire.
The flash (p. 23) and zoom (p. 16) cannot
be set during super macro shooting.
EN 23
Using the self-timer
Adjusting the brightness
(Exposure compensation)
After the shutter button is pressed all the way
down, the picture is taken after a short delay.
The standard brightness (appropriate exposure)
set by the camera based on the shooting mode
(except for [iAUTO]) can be adjusted brighter or
darker to obtain a desired shot.
1
Select the self-timer option in the
shooting function menu.
1
Select the exposure compensation
option in the shooting function
menu.
P
Y
OFF
2
12
0.0
WB
P
AUTO
ISO
0.0
AUTO
14M
4
0.3 0.0 0.3
WB
AUTO
ISO
AUTO
2
Use HI to select the setting
option, and press the H button to
set.
14M
2
Use HI to select the desired
brightness, and press the
H button.
Option
Description
YOFF
The self-timer is deactivated.
The self-timer lamp turns on for
approx. 10 seconds, then blinks
for approx. 2 seconds, and then
the picture is taken.
Y12 SEC
The self-timer lamp blinks for
approx. 2 seconds, and then the
picture is taken.
Y2 SEC
Self-timer shooting is automatically canceled
after one shot.
To cancel the self-timer after it starts
Press the m button.
24 EN
Adjusting to a natural color
scheme (White balance)
Selecting the ISO sensitivity
Abbreviation for the International
For more natural coloring, choose a white
balance option suited to the scene.
Organization for Standardization. ISO
standards specify the sensitivity for digital
cameras and film, thus codes such as “ISO
100” are used to represent sensitivity.
1
Select the white balance option in
the shooting function menu.
In the ISO setting, although smaller values
result in less sensitivity, sharp images can
be taken under fully lit conditions. Larger
values result in higher sensitivity, and
images can be taken at fast shutter speeds
even under low light conditions. However,
high sensitivity introduces noise into the
resulting picture, which may give it a grainy
appearance.
P
WB AUTO
0.0
WB
AUTO
ISO
AUTO
14M
1
Select the ISO setting option in the
shooting function menu.
2
Use HI to select the setting
option, and press the H button to
set.
P
Option
Description
0.0
WB
The camera automatically adjusts
the white balance according to the
shooting scene.
AUTO
ISO
ISO
ISO
ISO 200
WB AUTO
100 200 400
14M
1/400 F2.6
For shooting outdoors under a
clear sky
5
3
1
For shooting outdoors under a
cloudy sky
2
Use HI to select the setting
option, and press the H button to
set.
For shooting under tungsten
lighting
For shooting under daylight
fluorescent lighting (household
lighting, etc.)
Option
Description
w
The camera automatically adjusts
the sensitivity according to the
shooting scene.
ISO AUTO
For shooting under neutral
fluorescent lighting (desk lamps,
etc.)
x
y
The camera automatically adjusts
to a higher sensitivity than [ISO
AUTO] to reduce blurring caused
by camera shake and motion of
the subject.
HIGH ISO
AUTO*1
For shooting under white
fluorescent lighting (offices, etc.)
100/200/400/
800/1600
The ISO sensitivity is fixed to the
selected value.
*1
Available in the FE-4040 only.
EN 25
Selecting the size of still
images
1
Select the image size option in the
shooting function menu.
P
0.0
WB
AUTO
ISO
AUTO
16:9S 14M
8
M
14M
4
2
Use HI to select the setting
option, and press the H button to
set.
Option
Description
Suitable for printing A3
(11×17 in.) pictures.
14M (4288×3216)
8M (3264×2448)
5M (2560×1920)
3M (2048×1536)
2M (1600×1200)
1M (1280×960)
Suitable for printing pictures
up to A3 (11×17 in.).
Suitable for printing A4
(8.5×11 in.) pictures.
Suitable for printing pictures
up to A4 (8.5×11 in.).
Suitable for printing A5
(5×7 in.) pictures.
Suitable for printing pictures
at postcard size.
Suitable for viewing pictures
on a TV or using pictures in
emails and on websites.
VGA (640×480)
Suitable for playing pictures
on a wide screen TV.
16:9S (1920×1080)
Image size for movies can be selected from
the [SETUP] menu. [IMAGE SIZE/FRAME
RATE] (p. 27)
“Number of storable pictures (still images)/
Continuous recording length (movies) in the
internal memory and SD/SDHC memory
cards” (p. 49)
26 EN
For information on using the menus, see “Using the Menu” (p. 4).
Menus for Shooting Functions
The default settings of the function are highlighted in
.
Selecting a compression mode for still images [COMPRESSION]
z
(Shooting menu) X COMPRESSION
Available shooting modes: M N*1 s P ~
P
*1 Available in the FE-4020/X-940 only.
Submenu 2
Application
FINE
Shooting at high quality.
NORMAL
Shooting at normal quality.
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal
memory and SD/SDHC memory cards” (p. 49)
Selecting the image quality for movies [IMAGE SIZE/FRAME RATE]
A (Movie menu) X IMAGE SIZE/FRAME RATE
Available shooting modes: A
Submenu 1
Submenu 2
Application
VGA (640×480)/
QVGA (320×240)
IMAGE SIZE
Select the image quality based on the image size and frame rate.
Higher frame rates provide smoother movie images.
N30fps*1/
FRAME RATE
O15fps*1
*1
frames per second
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal
memory and SD/SDHC memory cards” (p. 49)
EN 27
Selecting the focusing area [AF MODE]
Shooting at higher magnifications than
optical zoom without reducing the
image quality [FINE ZOOM]
z
(Shooting menu) X AF MODE
Available shooting modes: M N*1
s
P
z
(Shooting menu) X FINE ZOOM
P ~
Available shooting modes: M N*1
s
*1 Available in the FE-4020/X-940 only.
P
P ~
Submenu 2
Application
*1 Available in the FE-4020/X-940 only.
The camera focuses automatically.
(If a face is detected, it is shown
by a white frame*1; when the
shutter button is pressed halfway
and the camera is able to focus,
the frame color is changed to
green*2 if the camera is able to
focus. If no face is detected, the
camera chooses a subject in the
frame and focuses automatically.)
Submenu 2
Application
Optical zoom and digital zoom are
used to zoom in for shooting.
OFF
FACE/iESP
Optical zoom and image cropping
are combined to zoom in for
shooting (up to 26.8x).
ON
This function will not reduce the image
quality since it does not convert the data
with fewer pixels into the data with larger
pixels.
The camera focuses on the
subject located within the AF
target mark.
SPOT
The camera tracks the subject
movement automatically to focus
on it continuously.
When set to [ON], [IMAGE SIZE] is limited
to [4] or lower.
AF TRACKING
When set to [ON], digital zoom is canceled
automatically.
*1
For some subjects, the frame may not appear or
may take some time to appear.
If the frame blinks in red, the camera is unable to
focus. Try again to press the shutter button halfway.
[FINE ZOOM] is not available when
[%SUPER MACRO] (p. 23) is selected.
*2
To focus on a moving subject
continuously (AF Tracking)
Stabilizing the blurred image caused
by the camera shake when shooting
[IMAGE STABILIZER] (Still images)
(FE-4040)/[IS MOVIE MODE] (Movies)
1Hold the camera to align the AF target
mark on the subject and press the
H button.
z
(Shooting menu) X IMAGE STABILIZER
2When the camera recognizes the subject,
the AF target mark automatically tracks
the subject movement to focus on it
continuously.
A (Movie menu) X IS MOVIE MODE
Available shooting modes: M s P
P
~ A
3To cancel the tracking, press the
H button.
Submenu 2
OFF
ON
Application
Depending on the subjects or the shooting
conditions, the camera may be unable to
lock the focus or fail to track the subject
movement.
Shoots without using the image
stabilizing function.
Shoots using the image stabilizing
function.
When the camera fails to track the subject
movement, the AF target mark changes to
red.
The default settings are [ON] for [IMAGE
STABILIZER] (still images) and [OFF] for [IS
MOVIE MODE] (movies).
28 EN
For information on using the menus, see “Using the Menu” (p. 4).
Displaying icon guides [ICON GUIDE]
At very slow shutter speeds (for example
when using still picture shooting mode or
taking night photographs), some images
may not acquire the proper stabilization
effect.
z
(Shooting menu) X ICON GUIDE
Available shooting modes: M N*1
s
P
P ~ A
*1 Available in the FE-4020/X-940 only.
Image stabilization may not prevent motion
blur caused by movement of the subject or
by extreme movement of the camera.
Submenu 2
Application
When [IS MOVIE MODE] (movies) is set to
[ON] during shooting, the recorded images
will be slightly magnified.
OFF
No icon guide is displayed.
The explanation of the selected
icon will be displayed when
a shooting mode or shooting
function menu icon is selected
(position the cursor on the icon for
a while to display the explanation).
ON
Recording sound when shooting still
images [R]
z
(Shooting menu) X R
PROGRAM AUTO
P
Available shooting modes: M N*1
s
P
Functions can be changed
manually.
*1 Available in the FE-4020/X-940 only.
Icon guide
Submenu 2
Application
0.0
WB
AUTO
OFF
No sound is recorded.
ISO
AUTO
The camera automatically starts
recording sound for approx.
14M
4
ON
4 seconds after a picture is taken.
This is useful for recording notes
or comments about the picture.
When recording, aim the microphone (p. 6)
at the source of the sound you want to
record.
Recording sound when shooting
movies [R]
A (Movie menu) X R
Available shooting modes: A
Submenu 2
OFF
ON
Application
No sound is recorded.
Sound is recorded.
When set to [ON], only the digital zoom can
be used during movie recording. To record
the movie with the optical zoom, set [R]
(movies) to [OFF].
EN 29
Menus for Playback, Editing, and
Printing Functions
Playing back pictures automatically
[SLIDESHOW]
Changing the image size [Q]
EDIT X Q
SLIDESHOW
Submenu 2
Application
To start a slideshow
This saves a high-resolution image
as a separate image with a smaller
size for use in e-mail attachments
and other applications.
8 640 × 480
After pressing the H button, the slideshow
starts. To stop the slideshow, press the
H button or the m button.
9 320 × 240
1Use HI to select an image.
Single-frame advance/rewind: During a
slideshow, press I to advance one frame or
press H to rewind one frame.
2Use FG to select the size, and press
the H button.
Retouching images [PERFECT FIX]
Cropping images [P]
EDIT X P
PERFECT FIX
Depending on the picture, the editing may
not be effective.
1Use HI to select an image, and press
the H button.
The retouching process may lower the
image resolution.
2Use the zoom buttons to select the size of
the cropping frame, and use FGHI to
move the frame.
Submenu 1
ALL
Application
[LIGHTING FIX] and [REDEYE
FIX] are applied together.
Only sections darkened by
backlighting and dim lighting are
brightened.
LIGHTING FIX
REDEYE FIX
Cropping frame
Eyes that are reddened by the
flash are corrected.
OK
SET
1Use FG to select a correction method,
and press the H button.
3Press the H button.
2Use HI to select an image for
retouching, and press the H button.
● The edited image will be saved as a separate
image.
● The retouched image is saved as a separate
image.
Erasing images [ERASE]
ERASE
Submenu 1
Application
All images in the internal memory
or card will be erased.
ALL ERASE
Images are individually selected
and erased.
SEL. IMAGE
ERASE
Deletes the image displayed.
Cancels erasing.
CANCEL
30 EN
For information on using the menus, see “Using the Menu” (p. 4).
Protecting images [0]
q(Playback menu) X 0
When erasing pictures in a internal memory,
do not insert the card into the camera.
When erasing pictures from the card, insert
a card into the camera in advance.
Protected images cannot be erased by
[ERASE] (p. 18, 30), [SEL. IMAGE], or [ALL
ERASE] (p. 30), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 32).
To erase all images [ALL ERASE]
1Use FG to select [ALL ERASE], and
press the H button.
1Use HI to select an image.
2Use FG to select [YES], and press the
H button.
2Press the H button.
● Press the H button again to cancel the
settings.
To individually select and erase
images [SEL. IMAGE]
3If necessary, repeat Steps 1and 2
to protect other images, and press the
m button.
1Use FG to select [SEL. IMAGE], and
press the H button.
2Use HI to select the image to be
erased, and press the H button to add a
R mark to the image.
Rotating images [y]
q(Playback menu) X y
● Press the W zoom button to display an index
view. Images can be quickly selected using
FGHI. Press the T button to return to the
single frame display.
1Use HI to select an image.
2Press the H button to rotate the image.
3If necessary, repeat Steps 1and 2to
make settings for other images, and press
the m button.
SEL. IMAGE
The new picture orientations will be saved
even after the power is turned off.
R mark
Adding sound to still images [R]
q(Playback menu) X R
OK
MENU
ERASE/CANCEL
1Use HI to select an image.
3Repeat Step 2to select the images to be
erased, and then press the m button
to erase the selected images.
2Aim the microphone toward the sound
source.
4Use FG to select [YES], and press the
FE-4040
FE-4020/X-940
H button.
● The images with a R mark are erased.
Saving print settings to the image data
[PRINT ORDER]
Microphone
q(Playback menu) X PRINT ORDER
3Press the H button.
“Print Reservations (DPOF)” (p. 40)
● Recording starts.
Print reservation can be set only for still
images that are recorded to the card.
EN 31
Menus for Other Camera Settings
Erasing data completely
Changing the display language [W]
[MEMORY FORMAT]/[FORMAT]
r (Settings 1) X W
r (Settings 1) X MEMORY FORMAT/
Submenu 2
Application
FORMAT
The language for the menus and
error messages displayed on the
monitor is selected.
Before formatting, check that no important
data is left in the internal memory or card.
Languages
Cards must be formatted with this camera
before first use or after being used with
other cameras or computers.
“Changing the display language” (p. 13)
Restoring the shooting functions to the
default settings [RESET]
Submenu 2
YES
NO
Application
Completely erases the image data
in the internal memory*1 or card
(including protected images).
r (Settings 1) X RESET
Cancels formatting.
Submenu 2
Application
*1
Be sure to remove the card before formatting the
internal memory.
Restores the following menu
functions to the default settings.
• Flash (p. 23)
• Macro (p. 23)
• Self-timer (p. 24)
• Exposure compensation (p. 24)
• White balance (p. 25)
• ISO (p. 25)
Copying images in the internal memory
to the card [BACKUP]
YES
r (Settings 1) X BACKUP
• Image size (p. 26)
• Menu functions in
z
(Shooting
menu)/A (Movie menu) (p. 27
Submenu 2
YES
NO
Application
Backs up image data in the
internal memory to the card.
to 29)
The current settings will not be
changed.
NO
Cancels the backup.
It takes some time to back up data. Check
that the battery has sufficient power before
starting the backup.
32 EN
For information on using the menus, see “Using the Menu” (p. 4).
Selecting a method for connecting
the camera to other devices
[USB CONNECTION]
Turning on the camera with the q
button [qPOWER ON]
r (Settings 1) X qPOWER ON
r (Settings 1) X USB CONNECTION
Submenu 2
NO
Application
Submenu 2
AUTO
Application
The camera is not turned on. To
turn on the camera, press the
n button.
When the camera is connected
to another device, the settings
selection screen is displayed.
Pressing the qbutton turns
on and starts the camera in the
playback mode.
YES
Select when transferring images
to a computer or when using
ib computer software with the
camera connected to a computer.
STORAGE
Select when transferring images
to a computer running Windows
Vista or Windows 7 without using
ib computer software.
Saving the mode when the camera is
turned off [SAVE SETTINGS]
MTP
r (Settings 1) X SAVE SETTINGS
Select when connecting to a
PictBridge-compatible printer.
PRINT
Submenu 2
Application
The shooting mode is saved
when the camera is turned off and
is reactivated the next time the
camera is turned on.
Copying pictures to a computer
without using ib computer software
This camera is compatible with the USB Mass
Storage Class. You can transfer and save the
image data on your computer while the camera
and the computer are connected.
YES
The shooting mode is set to P
mode when the camera is turned
on.
NO
System requirements
Windows 2000 Professional/
Windows XP/Windows Vista/Windows 7/
Mac OS X v10.3 or later
Choosing the opening screen display
[PW ON SETUP]
s (Settings 2) X PW ON SETUP
Even if a computer has USB ports, proper
operation is not guaranteed in the following
cases.
Submenu 2
OFF
Application
No opening screen is displayed.
● computers with USB ports installed using an
expansion card, etc.
The opening screen is displayed
when the camera is turned on.
ON
● computers without a factory-installed OS and
home-built computers
EN 33
Selecting the camera sound and its volume [SOUND SETTINGS]
s (Settings 2) X SOUND SETTINGS
Submenu 2
Submenu 3
OFF/ON
Submenu 4
Application
Select [ON] to disable camera sounds
(operating sound, shutter sound, and warning
sound) and mute sound during playback.
SILENT MODE*1, 2
—
SOUND TYPE
VOLUME
1/2/3
Selects the operating sound and volume
of the camera buttons (except the shutter
button).
BEEP
OFF (No Sound) or
2 levels of volume
SOUND TYPE
VOLUME
1/2/3
Selects the type and volume of the shutter
sound.
SHUTTER SOUND
OFF (No Sound) or
2 levels of volume
OFF (No Sound) or
2 levels of volume
8
—
—
Adjusts the warning sound volume.
Adjusts the image playback volume.
OFF (No Sound) or
5 levels of volume
qVOLUME
*1
Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback.
Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television.
*2
Adjusting the CCD and the image
Adjusting the brightness of the monitor
processing function [PIXEL MAPPING]
[s]
s (Settings 2) X PIXEL MAPPING
s (Settings 2) X s
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
Submenu 2
Application
Selects the monitor brightness
depending on the surrounding
brightness.
BRIGHT/
NORMAL
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
Setting the date and time [X]
s (Settings 2) X X
To adjust the CCD and the image
processing function
“Setting the date, time and time zone”
(p. 12)
Press the H button when [START]
(Submenu 2) is displayed.
To select the date display order
1Press I after setting Minute, and use
FG to select the date display order.
● The camera checks and adjusts the CCD and the
image processing function at the same time.
X
Y
M
D
TIME
Y/M/D
2010.02.26 12:30
Date order
MENU
OK
SET
CANCEL
34 EN
For information on using the menus, see “Using the Menu” (p. 4).
Switching between home and travel destination time zones [WORLD TIME]
s (Settings 2) X WORLD TIME
You will not be able to select a time zone using [WORLD TIME] if the camera clock has not first been
set using [X].
Submenu 2
Submenu 3
Application
The time in the home time zone (the time zone selected for x in
submenu 2).
x
y
HOME/ALTERNATE
The time in the travel destination time zone (the time selected for y
in submenu 2).
x*1
y*1, 2
—
—
Select the home time zone (x).
Select the travel destination time zone (y).
*1
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on.
When you select a time zone, the camera automatically calculates the time difference between the selected
zone and the home time zone (x) to display the time in the travel destination time zone (y).
*2
Selecting a video signal system to match your TV [VIDEO OUT]
s (Settings 2) X VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2
NTSC
PAL
Application
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1Use the camera to select the same video signal system as the one of connected TV
([NTSC]/[PAL]).
2Connect the TV and camera.
Multi-connector
Connector cover
AV cable (supplied)
Connect to the TV video
input jack (yellow) and
audio input jack (white).
FE-4040
FE-4020/X-940
EN 35
3Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
For details on changing the input source of the TV, refer to the TV’s instruction manual.
4Press the qbutton, and use HI to select the image for playback.
Depending on the TV’s settings, the displayed images and information may become cropped.
Saving battery power between shots [POWER SAVE]
t (Settings 3) X POWER SAVE
Submenu 2
OFF
Application
Cancels [POWER SAVE].
When the camera is not being used for approx. 10 seconds, the monitor automatically turns
off to save battery power.
ON
To resume standby mode
Press any button.
36 EN
Printing
Direct printing (PictBridge*1)
2
Turn on the printer, and then
connect the printer and camera.
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To find out if your printer supports PictBridge,
refer to the printer’s instruction manual.
Connector cover
FE-4040
Multi-connector
*1
PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
FE-4020/X-940
The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used.
For details, refer to the printer’s instruction
manual.
USB cable
(supplied)
For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer’s instruction manual.
I button
Printing images at the
printer’s standard settings
[EASY PRINT]
In the [SETUP] menu, set [USB
CONNECTION] to [PRINT]. “Using the
Menu” (p. 4)
EASY PRINT START
CUSTOM PRINT OK
1
Display the image to be printed on
the monitor.
3
4
Press I to start printing.
“Viewing images” (p. 16)
To print another image, use HI
to select an image, and press the
H button.
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
OK
PRINT
EXIT
EN 37
Changing the printer’s settings
for printing [CUSTOM PRINT]
5
Use FG to select the
[BORDERLESS] or [PICS/SHEET]
settings, and press the H button.
1
Follow Steps 1 and 2 in [EASY
PRINT] (p. 37).
Submenu 4
OFF/ON*1
Application
The image is printed with a border
around it ([OFF]).
The image is printed to fill the
entire paper ([ON]).
2
3
Press the H button to start
printing.
(The number of The number of images per sheet
images per sheet ([PICS/SHEET]) is selectable only
varies depending when [MULTI PRINT] is selected
Use FG to select the print mode,
and press the H button.
on the printer.)
in Step 3.
*1
PRINT MODE SELECT
The available settings for [BORDERLESS] vary
depending on the printer.
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER
If [STANDARD] is selected in Steps 4 and 5,
the image is printed at the printer’s standard
settings.
4/30
MENU
OK
SET
EXIT
14M
NORM
Submenu 2
Application
FILE
100 0004
’10/02/26 12:30
This prints the image selected in
Step 6.
PRINT
OK
PRINT
MORE
This prints all images stored in the
internal memory or card.
SINGLE PRINT
ALL PRINT
MULTI PRINT
This prints one image in a multiple
layout format.
6
7
Use HI to select an image.
This prints an index of all images
stored in the internal memory
or card.
ALL INDEX
Press F to make a print reservation
for the current image. Press G to
make the detailed printer settings
for the current image.
This prints images based on the
print reservation data on the card.
PRINT ORDER*1
*1
[PRINT ORDER] is available only when print
reservations have been made. “Print Reservations
(DPOF)” (p. 40)
To make the detailed printer settings
1Use FGHI to select the setting, and
press the H button.
4
Use FG to select [SIZE] (Submenu
3), and press I.
PRINT INFO
If the [PRINTPAPER] screen is not
displayed, the [SIZE], [BORDERLESS],
and [PICS/SHEET] are set to the printer’s
standard.
<x
1
DATE
FILE NAME
P
WITHOUT
WITHOUT
PRINTPAPER
MENU
OK
EXIT
SET
SIZE
BORDERLESS
STANDARD
STANDARD
MENU
OK
SET
BACK
38 EN
Submenu Submenu
9
Press the H button.
Application
5
6
This selects the number
of prints.
PRINT
<×
0 to 10
Selecting [WITH] prints the
images with the date.
Selecting [WITHOUT]
prints the images without
the date.
PRINT
WITH/
WITHOUT
CANCEL
DATE
Selecting [WITH] prints the
file name on the image.
Selecting [WITHOUT] does
not print any file name on
the image.
MENU
OK
SET
BACK
WITH/
WITHOUT
FILE NAME
10
Use FG to select [PRINT], and
press the H button.
● Printing starts.
(Proceeds
to the
setting
This selects a portion of
the image for printing.
P
● When [OPTION SET] is selected in [ALL PRINT]
mode, [PRINT INFO] screen is displayed.
screen.)
● When printing is finished, the [PRINT MODE
SELECT] screen is displayed.
To crop an image [P]
1Use the zoom buttons to select the size
of the cropping frame, use FGHI
to move the frame, and then press the
H button.
PRINT MODE SELECT
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER
MENU
OK
SET
EXIT
Cropping frame
To cancel printing
1When [DO NOT REMOVE USB CABLE]
is displayed, press the m button, use
FG to select [CANCEL], and then press
the H button.
OK
SET
2Use FG to select [OK], and press the
H button.
P
DO NOT REMOVE USB CABLE
OK
MENU
CANCEL
CANCEL
MENU
OK
SET
BACK
CONTINUE
CANCEL
8
If necessary, repeat Steps 6 and 7
to select the image to be printed,
OK
SET
make the detailed settings, and set
[SINGLE PRINT].
EN 39
11
12
3
4
Press the m button.
Use FG to select [<], and press
the H button.
When the message [REMOVE USB
CABLE] is displayed, disconnect
the USB cable from the camera and
printer.
4/30
0
14M
NORM
Print Reservations (DPOF*1)
FILE
100 0004
’10/02/26 12:30
OK
SET
In print reservations, the number of prints and
date imprint option are saved in the image on
the card. This enables easy printing at a printer
or print shop supporting DPOF by using only the
print reservations on the card without a computer
or a camera.
Use HI to select the image for
print reservation. Use FG to select
the quantity. Press the H button.
*1
DPOF is a standard for storing automatic printout
X
information from digital cameras.
Print reservations can be set only for the
images stored on the card. Insert a card
with recorded images before making print
reservations.
NO
DATE
TIME
DPOF reservations set by another DPOF
device cannot be changed by this camera.
Make changes using the original device.
Making new DPOF reservations with this
camera will erase the reservations made by
the other device.
MENU
OK
SET
BACK
5
Use FG to select the [X] (date
print) screen option, and press the
DPOF print reservations can be made for up
to 999 images per card.
H button.
Submenu 2
Application
NO
This prints the image only.
Single-frame print
This prints the image with the
shooting date.
reservations [<]
DATE
This prints the image with the
shooting time.
TIME
1
Display the [SETUP] menu.
“Using the Menu” (p. 4)
PRINT ORDER
2
From the playback menu q, select
[PRINT ORDER] and then press the
(
)
1
1
H button.
SET
PRINT ORDER
CANCEL
MENU
OK
SET
BACK
<
U
6
Use FG to select [SET], and press
the H button.
MENU
OK
SET
EXIT
40 EN
Reserving one print each of all
Resetting the print reservation
data for selected images
images on the card [U]
1
1
Follow Steps 1 and 2 in [<] (p. 40).
Follow Steps 1 and 2 in [<] (p. 40).
2
2
3
4
Use FG to select [U], and press
Use FG to select [<], and press
the H button.
the H button.
3
Follow Steps 5 and 6 in [<].
Use FG to select [KEEP] and
press the H button.
Resetting all print reservation
data
Use HI to select the image with
the print reservation you want to
cancel. Use FG to set the print
quantity to “0”.
1
Follow Steps 1 and 2 in [<] (p. 40).
2
5
6
Use FG to select either [<] or
If necessary, repeat Step 4, and then
press the H button when finished.
[U], and press the H button.
PRINT ORDER SETTING
PRINT ORDERED
Use FG to select the [X] (date
print) screen option, and press the
H button.
● The settings are applied to the remaining images
with the print reservation data.
RESET
KEEP
MENU
OK
SET
BACK
7
Use FG to select [SET], and press
the H button.
3
Use FG to select [RESET], and
press the H button.
EN 41
Usage Tips
If the camera does not work as intended, or if
an error message is displayed on the screen,
and you are unsure of what to do, refer to the
information below to fix the problem(s).
Monitor
“Difficult to see”.
● Condensation*1 may have occurred. Turn off the
power, and wait for the camera body to become
acclimated to the surrounding temperature and dry
out before taking pictures.
Troubleshooting
*1
Dew drops can form in the camera when it is
suddenly taken from a cold location into a warm,
humid room.
Battery
“The camera does not work even when
batteries are installed”.
“Vertical lines appear on the screen”.
● This condition may occur when the camera is
pointed at an extremely bright subject under a
clear sky and so on. The lines do not appear,
however, in the final image.
● Insert recharged batteries in the correct direction.
“Inserting the battery and the SD/SDHC memory
card (sold separately)” (p. 10),“Charging the
battery with the supplied USB-AC adapter” (p. 11)
“The light is caught in the picture”.
● Battery performance may have been reduced
temporarily due to low temperature. Take the
batteries out of the camera, and warm them by
putting them in your pocket for a while.
● Shooting with flash in dark situations results in
an image with many flash reflections on dust in
the air.
Date and time function
Card/Internal memory
“An error message is displayed”.
“Error message” (p. 43)
“Date and time settings return to the
default setting”.
● If the batteries are removed and left out of the
camera for about a day*2, the date and time
settings return to the default setting, and must
be reset.
Shutter button
“No picture is taken when the shutter
button is pressed”.
*2
The time until the date and time settings return
to the default setting varies depending on how
long the batteries have been loaded.
● Cancel sleep mode.
To save battery power, the camera automatically
goes into sleep mode and the monitor turns off
if there is no operation for 3 minutes when the
camera is turned on. No picture is taken even if
the shutter button is fully pressed in this mode.
Operate the zoom buttons or other buttons to
restore the camera from sleep mode before
taking a picture. If the camera is left for another
12 minutes, it automatically turns off. Press the
n button to turn the camera on.
“Setting the date, time and time zone” (p. 12)
Miscellaneous
“The camera makes a noise when taking
pictures”.
● The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.
● Press the qbutton to switch to the shooting
mode.
● Wait until #(flash charge) stops blinking before
taking pictures.
42 EN
Error message
Printer problem
Refill the ink in the printer.
When one of the messages below is
NO INK
displayed on the monitor, check the
corrective action.
Printer problem
Remove the jammed paper.
JAMMED
Error message
Corrective action
Printer problem
Return to the status where the
printer can be used.
SETTINGS
CHANGED*3
Card problem
Insert a new card.
CARD ERROR
Printer problem
Card problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
The card write-protect switch is
set to the “LOCK” side. Release
the switch.
WRITE
PROTECT
PRINT ERROR
Internal memory problem
• Insert a card.
• Erase unwanted images.*1
Problem with selected image
Use a computer to print.
CANNOT PRINT*4
MEMORY FULL
Card problem
• Replace the card.
• Erase unwanted images.*1
*1
Before erasing important images, download them to
a computer.
All data will be erased.
This is displayed, for instance, when the printer’s
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
This camera may be unable to print images taken by
other cameras.
CARD FULL
*2
*3
CARD SETUP
Card problem
Use FG to select [FORMAT],
and press the H button. Next,
use FG to select [YES], and
press the H button.*2
POWER OFF
FORMAT
OK
*4
SET
Internal memory problem
Use FG to select [MEMORY
FORMAT], and press the
H button. Next, use FG to
select [YES], and press the
H button.*2
MEMORY SETUP
POWER OFF
MEMORY FORMAT
OK
SET
Internal memory/Card problem
Take pictures before viewing
them.
NO PICTURE
Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image file
is corrupted.
PICTURE
ERROR
Problem with selected image
Use photo retouch software, etc.
to edit the image on a computer.
THE IMAGE
CANNOT
BE EDITED
Battery problem
Charge the battery.
BATTERY
EMPTY
Connection problem
Connect the camera and
computer or printer correctly.
NO
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
EN 43
Shooting tips
When you are unsure of how to take a picture
that you envision, refer to the information below.
Fast-moving object
Focusing
“Focusing on the subject”
The subject is not in the center
of the frame
● Taking a picture of a subject not in the center
of the screen
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
Camera shake
Pressing the shutter button halfway (p. 14)
● Set [AF MODE] (p. 28) to [FACE/iESP]
“Taking pictures without camera shake”
● Taking a picture in [AF TRACKING] mode
(p. 28)
● Taking pictures using N mode (p. 20)
(FE-4020/X-940)
The camera tracks the subject movement
automatically to focus on it continuously.
● Taking pictures using [IMAGE STABILIZER]
(p. 28) (FE-4040)
● Taking a picture of subjects where autofocus
● Select C (SPORT) in s mode (p. 20)
is difficult
The C (SPORT) mode uses a fast shutter speed
and can reduce the blur incurred by a moving
subject.
In the following cases, after focusing on an object
(by pressing the shutter button halfway down) with
high contrast at the same distance as the subject,
compose the shot, and take the picture.
● Taking pictures at a high ISO sensitivity
If a high ISO sensitivity is selected, pictures can
be taken at a high shutter speed even at locations
where a flash cannot be used.
Subjects with low contrast
“Selecting the ISO sensitivity” (p. 25)
Exposure (brightness)
“Taking pictures with the right
brightness”
When extremely bright objects
appear in the center of the
screen
● Taking pictures using [FILL IN] (p. 23) flash
A subject against backlight is brightened.
● Taking pictures using exposure compensation
(p. 24)
Object with no vertical lines*1
Adjust the brightness while viewing the screen
for taking the picture. Normally, taking pictures of
white subjects (such as snow) results in images
that are darker than the actual subject. Use the
exposure compensation to adjust in the positive
(+) direction to express whites as they appear.
When taking pictures of black subjects, on the
other hand, it is effective to adjust in the negative
(-) direction.
*1
It is also effective to compose the shot by holding the
camera vertically to focus, and then returning to the
horizontal position to take the picture.
When objects are at different
distances
44 EN
Playback/Editing tips
Color hue
“Taking pictures with colors at the same
shade as they appear”
Playback
● Taking pictures by selecting white balance
(p. 25)
“Playing images in the internal memory
and card”
Best results in most environments can normally
be obtained with the [WB AUTO] setting, but for
some subjects, you should try experimenting
with different settings. (This is especially true for
sunshade under a clear sky, mixed natural and
artificial light settings, and so on.)
● Remove the card when playing pictures in the
internal memory
“Inserting the battery and the SD/SDHC memory
card (sold separately)” (p. 10)
Editing
Image quality
“Erasing the sound recorded to a still
image”
“Taking sharper pictures”
● Record over the sound with silence when
● Taking pictures with the optical zoom
Avoid using digital zoom (p. 16) to take pictures.
● Taking pictures at a low ISO sensitivity
playing back the image
“Adding sound to still images [R]” (p. 31)
If the picture is taken with a high ISO sensitivity,
noise (small colored spots and color unevenness
that were not in the original image) can occur, and
the image can appear grainy. The resulting image
is grainier than with low ISO sensitivity as well.
“Selecting the ISO sensitivity” (p. 25)
Batteries
“Making batteries last longer”
● Avoid any of the following operations when not
actually taking pictures because they deplete
the battery power
● Repeatedly pressing the shutter button
halfway
● Repeatedly using the zoom
● Set [POWER SAVE] (p. 36) to [ON]
EN 45
Appendix
Camera care
Battery and AC adapter
(included)
Exterior
• This camera uses one Olympus lithium ion
battery (LI-70B). No other type of batteries can
be used.
• Wipe gently with a soft cloth. If the camera is
very dirty, soak the cloth in mild soapy water
and wring well. Wipe the camera with the
damp cloth and then dry it with a dry cloth. If
you have used the camera at the beach, use a
cloth soaked in clean water and wrung well.
Caution:
There is a risk of explosion if the battery is
replaced with the incorrect battery type.
Dispose of the used battery following the
instructions. (p. 52)
Monitor
• Power consumption by the camera varies
depending on which functions are used.
• During the conditions described below, power
is consumed continuously and the battery
becomes exhausted quickly.
• Wipe gently with a soft cloth.
Lens
• Blow dust off the lens with a commercial
blower, then wipe gently with a lens cleaner.
• The zoom is used repeatedly.
Battery/AC adapter
• Wipe gently with a soft, dry cloth.
• The shutter button is pressed halfway
repeatedly in shooting mode, activating the
auto focus.
• A picture is displayed on the monitor for an
extended period of time.
Do not use strong solvents such as benzene
or alcohol, or chemically treated cloth.
Mold may form on the lens surface if the
lens is left dirty.
• The camera is connected to a computer or
printer.
• Using an exhausted battery may cause the
camera to turn off without displaying the
battery level warning.
Storage
• When storing the camera for extended
periods, remove the battery, AC adapter and
card, and keep in a cool, dry place that is well
ventilated.
• Periodically insert the battery and test the
camera functions.
• The rechargeable battery is not fully charged
at the time of purchase. Before use, charge the
battery fully with the supplied F-2AC USB-AC
adapter (hereafter referred to as AC adapter)
or an optional AC adapter (F-1AC/D-7AC).
• When the included AC adapter is used,
charging usually takes approximately 3 hours
(varies on usage).
• The included AC adapter has been designed
to be used only for charging. Make sure that
operations such as shooting, viewing images
and so on are not being used while the AC
adapter is connected to the camera.
• The included AC adapter is designed to be
used only with this camera. Other cameras
cannot be charged with this AC adapter.
Do not use with other devices.
Avoid leaving the camera in places where
chemical products are handled since this
may result in corrosion.
• For plug-in type AC adapter:
The included AC adapter is intended to be
correctly orientated in a vertical or floor mount
position.
46 EN
Using a separately sold AC
adapter
Using an SD/SDHC memory
card
A D-7AC AC adapter (sold separately) is useful
for time-consuming tasks such as downloading
images to a computer or when running a
slideshow for a long period of time. A CB-MA1/
CB-MA3 multi-adapter (sold separately) is
required when using a D-7AC AC adapter with
this camera. To charge the battery, turn the
camera off and connect the D-7AC AC adapter.
Use only AC adapters approved for use with this
camera.
A card (and internal memory) also corresponds
to the film that records images in a film camera.
Otherwise, the recorded images (data) can be
erased, and retouching is also available with
the use of a computer. Cards can be removed
from the camera and exchanged, but this is
not possible with the internal memory. Use of
larger capacity cards enables you to take more
pictures.
SD/SDHC card write-protect switch
The SD/SDHC card body has a write-protect
switch. If you set the switch to the “LOCK”
side, you will not be able to write to the card,
delete data or format. Release the switch to
enable writing.
Using your AC adapter abroad
• The AC adapter can be used in most home
electrical sources within the range of 100
V to 240 V AC (50/60Hz) around the world.
However, depending on the country or area
you are in, the AC wall outlet may be shaped
differently and the AC adapter may require
a plug adapter to match the wall outlet. For
details, ask at your local electrical shop or
travel agent.
LOCK
• Do not use travel voltage converters as they
could damage your AC adapter.
Cards compatible with this camera
SD/SDHC memory cards (for more
information, visit the Olympus website)
EN 47
Using a new card
Readout/recording process of the card
During shooting, the current memory
indicator lights in red while the camera is
writing data. Never open the battery/card
compartment cover or unplug the USB
cable. This can not only damage the image
data but also render the internal memory or
card unusable.
Cards must be formatted with this camera
before first use or after being used with other
cameras or computers.
[MEMORY FORMAT]/[FORMAT] (p. 32)
Checking the image saving location
The memory indicator shows whether the
internal memory or card is being used during
shooting and playback.
P
Current memory indicator
v: Internal memory is being used
w: Card is being used
0.0
WB
AUTO
ISO
Current memory
AUTO
indicator
14M
P
4
Lights in red
0.0
WB
AUTO
ISO
AUTO
14M
4
4/30
Shooting mode
’10/02/26 12:30
Playback mode
Even if [MEMORY FORMAT]/[FORMAT],
[ERASE], [SEL. IMAGE], or [ALL ERASE]
is performed, the data in the card is not
completely erased. When disposing of
the card, damage the card to prevent the
disclosure of personal data.
48 EN
Number of storable pictures (still images)/Continuous recording length (movies) in the
internal memory and SD/SDHC memory cards
The figures for the number of storable still pictures and continuous recording length are approximate.
The actual capacity varies with shooting conditions and the card used.
Still images
Number of storable still pictures
IMAGE SIZE
COMPRESSION
Internal memory
SD/SDHC memory card (1 GB)
With sound Without sound With sound Without sound
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
2
4
2
4
123
242
123
244
6 4288×3216
4 3264×2448
n 2560×1920
3 2048×1536
2 1600×1200
1 1280×960
7 640×480
4
4
209
211
7
7
406
414
6
6
334
340
12
10
20
16
31
25
46
82
145
15
29
12
10
20
17
34
26
52
105
193
15
31
637
658
536
545
1,044
865
1,081
890
1,637
1,316
2,422
4,326
7,569
797
1,781
1,376
2,753
5,506
10,094
829
0 1920×1080
1,553
1,637
Movies
Continuous recording length
Internal memory SD/SDHC memory card (1 GB)
With sound Without sound With sound Without sound
IMAGE SIZE
FRAME RATE
N
O
N
O
9 sec.
19 sec.
27 sec.
53 sec.
9 sec.
19 sec.
27 sec.
55 sec.
8 min. 34 sec.
8 min. 36 sec.
8 640×480
17 min. 4 sec. 17 min. 13 sec.
23 min. 49 sec. 24 min. 6 sec.
47 min. 5 sec. 48 min. 12 sec.
9 320×240
The maximum file size of a single movie is 2 GB, regardless of the capacity of the card.
Increasing the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other device to save
the images, and then erase the images in the internal memory or card. [ERASE] (p. 18, 30),
[SEL. IMAGE] (p. 30), [ALL ERASE] (p. 30), [MEMORY FORMAT]/[FORMAT] (p. 32)
EN 49
SAFETY PRECAUTIONS
Handling the Camera
WARNING
Do not use the camera near flammable or
explosive gases.
Do not use the flash and LED on people
(infants, small children, etc.) at close range.
You must be at least 1 m (3 ft.) away from the
faces of your subjects. Firing the flash too close
to the subject’s eyes could cause a momentary
loss of vision.
CAUTION
RISK OF ELECTRIC SHOCK
•
•
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS
SERVICE PERSONNEL.
•
•
Keep young children and infants away from
the camera.
An exclamation mark enclosed in a
triangle alerts you to important operating
and maintenance instructions in the
documentation provided with the product.
•
Always use and store the camera out of the
reach of young children and infants to prevent
the following dangerous situations which could
cause serious injury:
DANGER
WARNING
CAUTION
If the product is used without observing
the information given under this symbol,
serious injury or death may result.
•
•
•
•
Becoming entangled in the camera strap,
causing strangulation.
Accidentally swallowing the battery, cards or
other small parts.
Accidentally firing the flash into their own eyes
or those of another child.
Accidentally being injured by the moving parts
of the camera.
If the product is used without observing the
information given under this symbol, injury
or death may result.
If the product is used without observing the
information given under this symbol, minor
personal injury, damage to the equipment,
or loss of valuable data may result.
WARNING!
•
•
Do not look at the sun or strong lights with the
camera.
Do not use or store the camera in dusty or
humid places.
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO
WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
•
•
Do not cover the flash with a hand while firing.
Use SD/SDHC memory cards only. Never use
other types of cards.
If you accidently insert another type of card into
the camera, contact an authorized distributor or
service center. Do not try to remove the card by
force.
General Precautions
Read All Instructions — Before you use the
product, read all operating instructions. Save all
manuals and documentation for future reference.
Cleaning — Always unplug this product from the
wall outlet before cleaning. Use only a damp
cloth for cleaning. Never use any type of liquid or
aerosol cleaner, or any type of organic solvent to
clean this product.
CAUTION
•
Stop using the camera immediately if you
notice any unusual odors, noise, or smoke
around it.
Attachments — For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
•
Never remove the batteries with bare hands,
Water and Moisture — For precautions on
products with weatherproof designs, read the
weatherproofing sections.
Location — To avoid damage to the product, mount
the product securely on a stable tripod, stand,
or bracket.
Power Source — Connect this product only to the
power source described on the product label.
Lightning — If a lightning storm occurs while using
an AC adapter, remove it from the wall outlet
immediately.
which may cause a fire or burn your hands.
Never hold or operate the camera with wet
hands.
Do not leave the camera in places where it may
be subject to extremely high temperatures.
Doing so may cause parts to deteriorate and,
in some circumstances, cause the camera to
catch fire. Do not use the AC adapter if it is
covered (such as a blanket). This could cause
overheating, resulting in fire.
•
•
•
Foreign Objects — To avoid personal injury, never
insert a metal object into the product.
Heat — Never use or store this product near any
heat source such as a radiator, heat register,
stove, or any type of equipment or appliance that
generates heat, including stereo amplifiers.
50 EN
•
Handle the camera with care to avoid getting a
low-temperature burn.
•
•
If a battery leaks, becomes discolored or
deformed, or becomes abnormal in any other way
during operation, stop using the camera.
If a battery leaks fluid onto your clothing or skin,
remove the clothing and flush the affected area
with clean, running cold water immediately. If
the fluid burns your skin, seek medical attention
immediately.
•
When the camera contains metal parts,
overheating can result in a low-temperature
burn. Pay attention to the following:
•
When used for a long period, the camera will
get hot. If you hold on to the camera in this
state, a low-temperature burn may be caused.
In places subject to extremely cold
•
Never subject batteries to strong shocks or
continuous vibration.
•
temperatures, the temperature of the camera’s
body may be lower than the environmental
temperature. If possible, wear gloves when
handling the camera in cold temperatures.
CAUTION
•
•
•
Before loading, always inspect the battery carefully
for leaks, discoloration, warping, or any other
abnormality.
The battery may become hot during prolonged
use. To avoid minor burns, do not remove it
immediately after using the camera.
Always unload the battery from the camera before
storing the camera for a long period.
•
Be careful with the strap.
•
Be careful with the strap when you carry the
camera. It could easily catch on stray objects
and cause serious damage.
Battery Handling Precautions
Follow these important guidelines to prevent
batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or
burns.
Caution for Usage Environment
•
To protect the high-precision technology contained
in this product, never leave the camera in the
places listed below, no matter if in use or storage:
•
Places where temperatures and/or humidity
are high or go through extreme changes.
Direct sunlight, beaches, locked cars, or near
other heat sources (stove, radiator, etc.) or
humidifiers.
DANGER
•
The camera uses a lithium ion battery specified by
Olympus. Charge the battery with the specified AC
adapter. Do not use any other AC adapters.
Never heat or incinerate batteries.
•
•
Take precautions when carrying or storing
batteries to prevent them from coming into contact
with any metal objects such as jewelry, pins,
fasteners, etc.
Never store batteries where they will be
exposed to direct sunlight, or subjected to high
temperatures in a hot vehicle, near a heat source,
etc.
To prevent causing battery leaks or damaging their
terminals, carefully follow all instructions regarding
the use of batteries. Never attempt to disassemble
a battery or modify it in any way, solder, etc.
If battery fluid gets into your eyes, flush your eyes
immediately with clear, cold running water and
seek medical attention immediately.
Always store batteries out of the reach of small
children. If a child accidentally swallows a battery,
seek medical attention immediately.
•
•
•
In sandy or dusty environments.
Near flammable items or explosives.
In wet places, such as bathrooms or in the rain.
When using products with weatherproof designs,
read their manuals as well.
•
•
•
In places prone to strong vibrations.
•
•
Never drop the camera or subject it to severe
shocks or vibrations.
When mounted on a tripod, adjust the position of
the camera with the tripod head. Do not twist the
camera.
•
•
Do not touch electric contacts on cameras.
Do not leave the camera pointed directly at the
sun. This may cause lens or shutter curtain
damage, color failure, ghosting on the CCD, or
may possibly cause fires.
Do not push or pull severely on the lens.
Before storing the camera for a long period,
remove the batteries. Select a cool, dry location
for storage to prevent condensation or mold from
forming inside the camera. After storage, test the
camera by turning it on and pressing the shutter
button to make sure that it is operating normally.
Always observe the operating environment
restrictions described in the camera’s manual.
•
•
•
•
WARNING
Keep batteries dry at all times.
•
•
To prevent batteries from leaking, overheating,
or causing a fire or explosion, use only batteries
recommended for use with this product.
Insert the battery carefully as described in the
operating instructions.
If rechargeable batteries have not been recharged
within the specified time, stop charging them and
do not use them.
•
•
•
•
Do not use a battery if it is cracked or broken.
EN 51
Battery Handling Precautions
Disclaimer of Warranty
•
•
This camera uses a lithium ion battery specified by
Olympus. Do not use any other type of battery.
If the battery’s terminals get wet or greasy, camera
contact failure may result. Wipe the battery well
with a dry cloth before use.
Always charge a battery when using it for the first
time, or if it has not been used for a long period.
When operating the camera with battery power
at low temperatures, try to keep the camera and
spare battery as warm as possible. A battery that
has run down at low temperatures may be restored
after it is warmed at room temperature.
The number of pictures you can take may vary
depending on the shooting conditions or battery.
Before going on a long trip, and especially before
traveling abroad, purchase extra batteries. A
recommended battery may be difficult to obtain
while traveling.
Please recycle batteries to help save our planet’s
resources. When you throw away dead batteries,
be sure to cover their terminals and always
observe local laws and regulations.
•
Olympus makes no representations or warranties,
either expressed or implied, by or concerning any
content of these written materials or software, and
in no event shall be liable for any implied warranty
of merchantability or fitness for any particular
purpose or for any consequential, incidental or
indirect damages (including but not limited to
damages for loss of business profits, business
interruption and loss of business information)
arising from the use or inability to use these
written materials or software or equipment. Some
countries do not allow the exclusion or limitation
of liability for consequential or incidental damages
or of the implied warranty, so the above limitations
may not apply to you.
•
•
•
•
•
Olympus reserves all rights to this manual.
Warning
•
Unauthorized photographing or use of
copyrighted material may violate applicable
copyright laws. Olympus assumes no
responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of
copyright owners.
LCD Monitor
•
Do not push the monitor forcibly; otherwise the
image may become vague, resulting in a playback
mode failure or damage to the monitor.
Copyright Notice
•
•
A strip of light may appear on the top/bottom of the
monitor, but this is not a malfunction.
When a subject is viewed diagonally in the
camera, the edges may appear zigzagged on the
monitor. This is not a malfunction; it will be less
noticeable in playback mode.
In places subject to low temperatures, the LCD
monitor may take a long time to turn on or its
color may change temporarily. When using the
camera in extremely cold places, it is a good idea
to occasionally place it in a warm place. An LCD
monitor exhibiting poor performance due to low
temperatures will recover in normal temperatures.
The LCD used for the monitor is made with
high-precision technology. However, black spots
or bright spots of light may appear constantly on
the LCD Monitor. Due to its characteristics or the
angle at which you are viewing the monitor, the
spot may not be uniform in color and brightness.
This is not a malfunction.
All rights reserved. No part of these written
materials or this software may be reproduced
or used in any form or by any means, electronic
or mechanical, including photocopying and
recording or the use of any type of information
storage and retrieval system, without the prior
written permission of Olympus. No liability
is assumed with respect to the use of the
information contained in these written materials
or software, or for damages resulting from
the use of the information contained therein.
Olympus reserves the right to alter the features
and contents of this publication or software
without obligation or advance notice.
•
•
Legal and Other Notices
•
•
Olympus makes no representations or warranties
regarding any damages, or benefit expected by
using this unit lawfully, or any request from a third
person, which are caused by the inappropriate use
of this product.
Olympus makes no representations or warranties
regarding any damages or any benefit expected
by using this unit lawfully which are caused by
erasing picture data.
52 EN
FCC Notice
•
•
Radio and Television Interference
Changes or modifications not expressly approved
by the manufacturer may void the user’s authority
to operate this equipment. This equipment has
been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation.
•
•
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
•
•
Adjust or relocate the receiving antenna.
Increase the distance between the camera and
receiver.
•
•
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
Consult your dealer or an experienced radio/TV
technician for help. Only the OLYMPUS-supplied
USB cable should be used to connect the
camera to USB enabled personal computers
(PC).
Any unauthorized changes or modifications to
this equipment would void the user’s authority
to operate it.
Use Only Dedicated Rechargeable
Battery and AC adapter
We strongly recommend that you use only
the genuine Olympus dedicated rechargeable
battery and AC adapter with this camera. Using
a non-Olympus rechargeable battery and/or AC
adapter may result in fire or personal injury due
to leakage, heating, ignition or damage to the
battery. Olympus does not assume any liability
for accidents or damage that may result from the
use of a battery and/or AC adapter that are not
genuine Olympus accessories.
EN 53
Representative plug of power supply cord of countries/regions around the
world
A Type
B Type
BF Type
B3 Type
C Type
SE Type
O Type
(American Type) (British Type) (British Type) (British Type) (CEE Type)
(CEE Type) (Oceania Type)
The representative supply voltage and plug type are described in this chart.
Depending on the area, different types of plugs and supply voltages are used.
Attention: Power cord meeting demands from each country shall be used.
-
For only the United States
Use a UL Listed, 1.5 - 4.5 m (5 - 15 ft), Type SPT-2 or NISPT-2, AWG no. 18 power supply cord, rated for
125 V 7 A, with a non-polarized NEMA 1-15P plug rated for 125 V 15 A”.
Europe
Countries/Regions Voltage
North America
Countries/Regions Voltage
Frequency (Hz) Plug type
Frequency (Hz) Plug type
Austria
Belgium
Czech
230
230
220
230
230
230
230
220
220
230
230
220
230
230
230
220
230
220
220
220
127/230
230
230
240
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
C
C
C
C
C
C
C
C
C
C
C/BF
C
C
C
C
C
C
C
Canada
USA
120
120
60
60
A
A
Denmark
Finland
France
Germany
Greece
Hungary
Iceland
Ireland
Central America
Countries/Regions Voltage
Frequency (Hz) Plug type
Bahamas
Costa Rica
Cuba
Dominican (rep)
El Salvador
Guatemala
Honduras
Jamaica
120/240
110
110/220
110
110
120
110
110
120/127
120/240
110/220
60
60
60
60
60
60
60
50
60
60
60
A
A
A/C
A
A
A
A
A
A
A
Italy
Luxemburg
Netherlands
Norway
Poland
Portugal
Romania
Russia
Slovak
Spain
Sweden
Switzerland
UK
Mexico
Nicaragua
Panama
A
South America
Countries/Regions Voltage
Argentina
Brazil
Chile
Colombia
Peru
Venezuela
C
C
C
C
C
BF
Frequency (Hz) Plug type
220
127/220
220
120
220
50
60
50
60
60
60
C/BF/O
A/C
C
A
A/C
A
120
Asia
Countries/Regions Voltage
Frequency (Hz) Plug type
Middle East
China
Hong Kong
India
Indonesia
Japan
Korea (rep)
Malaysia
Philippines
Singapore
Taiwan
220
200/220
230/240
127/230
100
220
240
220/230
230
110
50
50
50
50
50/60
60
50
60
50
60
A
BF
C
C
A
Countries/Regions Voltage
Frequency (Hz) Plug type
Iran
Iraq
220
220
50
50
50
50
50
50
C/BF
C/BF
C
A/C/BF
C
Israel
230
Saudi Arabia
Turkey
UAE
127/220
220
240
C
BF
A/C
BF
A
C/BF
Africa
Countries/Regions Voltage
Frequency (Hz) Plug type
Thailand
Vietnam
220
220
50
50
C/BF
A/C
Algeria
Congo (dem)
Egypt
Ethiopia
Kenya
Nigeria
South Africa
Tanzania
Tunisia
127/220
220
220
220
240
230
220/230
230
50
50
50
50
50
50
50
50
50
C
C
C
Oceania
Countries/Regions Voltage
Australia
New Zealand
C
Frequency (Hz) Plug type
C/BF
C/BF
C/BF
C/BF
C
240
230/240
50
50
O
O
220
54 EN
Olympus shall not be obligated to perform
preventive maintenance, installation,
deinstallation, or maintenance.
For customers in North and South
America
For customers in USA
Declaration of Conformity
Olympus reserves the right to (i) use
reconditioned, refurbished, and/or serviceable
used parts (that meet Olympus’s quality
assurance standards) for warranty or any other
repairs and (ii) make any internal or external
design and/or feature changes on or to its
products without any liability to incorporate such
changes on or to the Products.
Model Number
:FE-4040/FE-4020/
X-940
Trade Name
Responsible Party
:OLYMPUS
:
Address
:3500 Corporate
Parkway, P.O. Box
610, Center Valley, PA
18034-0610, U.S.A.
:484-896-5000
WHAT IS NOT COVERED BY THIS
LIMITED WARRANTY
Excluded from this limited warranty and not
warranted by Olympus in any fashion, either
express, implied, or by statute, are:
Telephone Number
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
(a) products and accessories not manufactured by
Olympus and/or not bearing the “OLYMPUS” brand
label (the warranty coverage for products and
accessories of other manufacturers, which may be
distributed by Olympus, is the responsibility of the
manufacturers of such products and accessories
in accordance with the terms and duration of such
manufacturers’ warranties);
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
(b) any Product which has been disassembled,
repaired, tampered with, altered, changed, or
modified by persons other than Olympus’s own
authorized service personnel unless repair by
others is made with the written consent of Olympus;
(c) defects or damage to the Products resulting
from wear, tear, misuse, abuse, negligence,
sand, liquids, impact, improper storage,
nonperformance of scheduled operator and
maintenance items, battery leakage, use of non-
“OLYMPUS” brand accessories, consumables, or
supplies, or use of the Products in combination
with non-compatible devices;
For customers in Canada
This Class B digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
OLYMPUS WORLDWIDE LIMITED
WARRANTY - IMAGING PRODUCTS
Olympus warrants that the enclosed Olympus®
imaging product(s) and related Olympus®
accessories (individually a “Product” and
collectively the “Products”) will be free from
defects in materials and workmanship under
normal use and service for a period of one (1)
year from the date of purchase.
If any Product proves to be defective within the
one-year warranty period, the customer must
return the defective Product to any of Olympus
Service Centers, following the procedure
set forth below (See “WHAT TO DO WHEN
SERVICE IS NEEDED”).
(d) software programs;
(e) supplies and consumables (including but not
limited to lamps, ink, paper, film, prints, negatives,
cables and batteries); and/or
(f) Products which do not contain a validly placed
and recorded Olympus serial number, unless they
are a model on which Olympus does not place
and record serial numbers.
EXCEPT FOR THE LIMITED WARRANTY SET
FORTH ABOVE, OLYMPUS MAKES NO AND
DISCLAIMS ALL OTHER REPRESENTATIONS,
GUARANTIES, CONDITIONS, AND
Olympus, at its sole discretion, will repair,
replace, or adjust the defective Product, provided
that Olympus investigation and factory inspection
disclose that (a) such defect developed under
normal and proper use and (b) the Product is
covered under this limited warranty.
Repair, replacement, or adjustment of defective
Products shall be Olympus’s sole obligation and
the customer’s sole remedy hereunder.
WARRANTIES CONCERNING THE
PRODUCTS, WHETHER DIRECT OR INDIRECT,
EXPRESS OR IMPLIED, OR ARISING UNDER
ANY STATUTE, ORDINANCE, COMMERCIAL
USAGE OR OTHERWISE, INCLUDING BUT
NOT LIMITED TO ANY WARRANTY OR
The customer is liable and shall pay for shipment
of the Products to the Olympus Service Center.
REPRESENTATION AS TO THE SUITABILITY,
EN 55
DURABILITY, DESIGN, OPERATION, OR
CONDITON OF THE PRODUCTS (OR ANY
PART THEREOF) OR THE MERCHANTABILITY
OF THE PRODUCTS OR THEIR FITNESS FOR
A PARTICULAR PURPOSE, OR RELATING
TO THE INFRINGEMENT OF ANY PATENT,
COPYRIGHT, OR OTHER PROPRIETARY
RIGHT USED OR INCLUDED THEREIN.
IF ANY IMPLIED WARRANTIES APPLY AS
A MATTER OF LAW, THEY ARE LIMITED
IN DURATION TO THE LENGTH OF THIS
LIMITED WARRANTY.
SOME STATES MAY NOT RECOGNIZE
A DISCLAIMER OR LIMITATION OF
WARRANTIES AND/OR LIMITATION OF
LIABILITY SO THE ABOVE DISCLAIMERS AND
EXCLUSIONS MAY NOT APPLY.
THE CUSTOMER MAY ALSO HAVE DIFFERENT
AND/OR ADDITIONAL RIGHTS AND REMEDIES
THAT VARY FROM STATE TO STATE.
THE CUSTOMER ACKNOWLEDGES AND
AGREES THAT OLYMPUS SHALL NOT
BE RESPONSIBLE FOR ANY DAMAGES
THAT THE CUSTOMER MAY INCUR FROM
DELAYED SHIPMENT, PRODUCT FAILURE,
PRODUCT DESIGN, SELECTION, OR
PRODUCTION, IMAGE OR DATA LOSS OR
IMPAIRMENT OR FROM ANY OTHER CAUSE,
WHETHER LIABILITY IS ASSERTED IN
CONTRACT, TORT (INCLUDING NEGLIGENCE
AND STRICT PRODUCT LIABILITY) OR
OTHERWISE. IN NO EVENT SHALL OLYMPUS
BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES OF
ANY KIND (INCLUDING WITHOUT LIMITATION
LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR
SHOULD BE AWARE OF THE POSSIBILITY OF
SUCH POTENTIAL LOSS OR DAMAGE.
WHAT TO DO WHEN SERVICE IS NEEDED
The customer must transfer any image or other
data saved on a Product to another image or
data storage medium and/or remove any film
from the Product prior to sending the Product to
Olympus for service.
IN NO EVENT SHALL OLYMPUS BE
RESPONSIBLE FOR SAVING, KEEPING OR
MAINTAINING ANY IMAGE OR DATA SAVED
ON A PRODUCT RECEIVED BY IT FOR
SERVICE, OR ON ANY FILM CONTAINED
WITHIN A PRODUCT RECEIVED BY IT
FOR SERVICE, NOR SHALL OLYMPUS BE
RESPONSIBLE FOR ANY DAMAGES IN
THE EVENT ANY IMAGE OR DATA IS LOST
OR IMPAIRED WHILE SERVICE IS BEING
PERFORMED (INCLUDING, WITHOUT
LIMITATION, DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR
SHOULD BE AWARE OF THE POSSIBILITY OF
SUCH POTENTIAL LOSS OR IMPAIRMENT.
Package the Product carefully using ample
padding material to prevent damage in transit
and either deliver it to the Authorized Olympus
Dealer that sold you the Product or ship it
postage prepaid and insured to any of our
Olympus Service Centers.
When returning Products for service, your
package should include the following:
1
2
Sales receipt showing date and place of
purchase.
Copy of this limited warranty bearing the
Product serial number corresponding to the
serial number on the Product (unless it is a
model on which Olympus does not place and
record serial numbers).
3
4
A detailed description of the problem.
Sample prints, negatives, digital prints (or files on
disk) if available and related to the problem.
Representations and warranties made by any
person, including but not limited to dealers,
representatives, salespersons, or agents of
Olympus, which are inconsistent or in conflict
with or in addition to the terms of this limited
warranty, shall not be binding upon Olympus
unless reduced to writing and approved by an
expressly authorized officer of Olympus.
This limited warranty is the complete and
exclusive statement of warranty which
When service is completed, the Product will be
returned to you postage prepaid.
WHERE TO SEND PRODUCT FOR
SERVICE
See “WORLDWIDE WARRANTY” for the
nearest service center.
Olympus agrees to provide with respect to the
Products and it shall supersede all prior and
contemporaneous oral or written agreements,
understandings, proposals, and communications
pertaining to the subject matter hereof.
This limited warranty is exclusively for the
benefit of the original customer and cannot be
transferred or assigned.
INTERNATIONAL WARRANTY SERVICE
International warranty service is available under
this warranty.
56 EN
affect the customer’s legal warranty rights under
the applicable national legislation governing the
sale of consumer goods mentioned above.
This Guarantee does not cover the following
and the customer will be required to pay repair
charge, even for defects occurring within the
Guarantee period referred to above.
For customers in Europe
“CE” mark indicates that this product complies
with the European requirements for safety,
health, environment and customer protection.
“CE” mark cameras are intended for sales in
Europe.
2
a. Any defect that occurs due to mishandling
(such as an operation performed that is not
mentioned in the Handling Care or other
sections of the instructions, etc.)
b. Any defect that occurs due to repair,
modification, cleaning, etc. performed by
anyone other than Olympus or an Olympus
authorized service station.
This symbol [crossed-out wheeled bin WEEE
Annex IV] indicates separate collection of waste
electrical and electronic equipment in the EU
countries.
Please do not throw the equipment into the
domestic refuse.
Please use the return and collection systems
available in your country for the disposal of this
product.
c. Any defect or damage that occurs due to
transport, a fall, shock, etc. after purchase of
the product.
d. Any defect or damage that occurs due to fire,
earthquake, flood damage, thunderbolt, other
natural disasters, environmental pollution and
irregular voltage sources.
This symbol [crossed-out wheeled bin Directive
2006/66/EC Annex II] indicates separate
collection of waste batteries in the EU countries.
Please do not throw the batteries into the
domestic refuse. Please use the return and
collection systems available in your country for
the disposal of the waste batteries.
e. Any defect that occurs due to careless or
improper storage (such as keeping the
product under conditions of high temperature
and humidity, near insect repellents such as
naphthalene or harmful drugs, etc.), improper
maintenance, etc.
f. Any defect that occurs due to exhausted
batteries, etc.
g. Any defect that occurs due to sand, mud, etc.
entering the inside of the product casing.
h. When the Guarantee Certificate is not
returned with the product.
i. When any alterations whatsoever are made to
the Guarantee Certificate regarding the year,
month and date of purchase, the customer’s
name, the dealer’s name, and the serial
number.
j. When proof of purchase is not presented with
this Guarantee Certificate.
This Guarantee applies to the product only; the
Guarantee does not apply to any other accessory
equipment, such as the case, strap, lens cap and
batteries.
Olympus’s sole liability under this Guarantee shall
be limited to repairing or replacing the product.
Any liability under the Guarantee for indirect
or consequential loss or damage of any kind
incurred or suffered by the customer due to a
defect of the product, and in particular any loss
or damage caused to any lenses, films, other
equipment or accessories used with the product
or for any loss resulting from a delay in repair or
loss of data, is excluded. Compelling regulations
by law remain unaffected by this.
Provisions of warranty
1
If this product proves to be defective, although it
has been used properly (in accordance with the
written Handling Care and Operating instructions
supplied with it), during the applicable national
warranty period and has been purchased from
an authorized Olympus distributor within the
business area of Olympus Europa Holding GmbH
com this product will be repaired, or at Olympus’s
option replaced, free of charge. To claim under
this warranty the customer must take the product
before the end of the applicable national warranty
period to the dealer where the product was
purchased or any other Olympus service station
within the business area of Olympus Europa
Holding GmbH as stipulated on the website:
period of the World Wide Guarantee the customer
may turn the product in at any Olympus service
station. Please notice that not in all countries
such Olympus service station exists.
3
4
2
The customer shall transport the product to the
dealer or Olympus authorized service station
at his own risk and shall be responsible for any
costs incurred in transporting the product.
Provisions of Guarantee
1
“OLYMPUS IMAGING CORP., Shinjuku
Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku,
Tokyo 163-0914, Japan grants a one year World
Wide Guarantee. This worldwide Guarantee
must be presented at an Olympus authorized
repair service station before any repair can
be made under conditions of this Guarantee.
This Guarantee is valid only if the Guarantee
Certificate and proof of purchase are presented
at the Olympus repair service station. Please note
that this Guarantee is in addition to and does not
EN 57
Notes regarding Guarantee
maintenance
1
This Guarantee will only be valid if the Guarantee
Certificate is duly completed by Olympus or an
authorized dealer or other documents contain
sufficient proof. Therefore, please make sure
that your name, the name of the dealer, the
serial number and the year, month and date of
purchase are all completed or the original invoice
or the sales receipt (indicating the dealer’s
name, the date of purchase and product type) is
attached to this Guarantee Certificate. Olympus
reserves the right to refuse free-of-charge service
if neither Guarantee Certificate is completed
nor the above document is attached or if the
information contained in it is incomplete or
illegible.
2
Since this Guarantee Certificate will not be re-
issued, keep it in a safe place.
*
Please refer to the list on the web site: http://
Olympus service network.
Trademarks
•
•
IBM is a registered trademark of International
Business Machines Corporation.
Microsoft and Windows are registered trademarks
of Microsoft Corporation.
•
•
•
Macintosh is a trademark of Apple Inc.
SDHC logo is a trademark.
All other company and product names are
registered trademarks and/or trademarks of their
respective owners.
•
The standards for camera file systems referred to
in this manual are the “Design rule for Camera File
system/DCF” standards stipulated by the Japan
Electronics and Information Technology Industries
Association (JEITA).
58 EN
SPECIFICATIONS
Camera
Product type
:
Digital camera (for shooting and displaying)
Recording system
Still pictures
:
:
Digital recording, JPEG (in accordance with Design rule for Camera File
system (DCF))
Applicable standards
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III,
PictBridge
Sound with still pictures
:
:
:
Wave format
Movie
AVI Motion JPEG
Memory
Internal memory
SD memory card
SDHC memory card
No. of effective pixels
Image pickup device
Lens
:
:
:
13,800,000 pixels
1/2.33” CCD (primary color filter), 14,500,000 pixels (gross)
Olympus lens 4.7 to 18.6 mm, f2.6 to 5.9
(equivalent to 26 to 105 mm on a 35 mm camera)
Photometric system
Shutter speed
:
:
:
Digital ESP metering system
4 to 1/2000 sec.
Shooting range
0.6 m (2.0 ft.) to (W), 1.0 m (3.3 ft.) to (T) (normal)
0.2 m (0.5 ft.) to (W), 0.6 m (2.0 ft.) to (T) (macro mode)
0.04 m (0.13 ft.) to (super macro mode)
Monitor
:
:
:
2.7” TFT color LCD display, 230,000 dots
Multi-connector (DC-IN jack, USB connector, A/V OUT jack)
2000 up to 2099
Connector
Automatic calendar system
Operating environment
Temperature
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Humidity
:
:
30 % to 90 % (operation)/10 % to 90 % (storage)
Power supply
One Olympus lithium ion battery (LI-70B) or an AC adapter (sold
separately)
Dimensions
Weight
:
FE-4040: 96.8 mm (W) × 56.2 mm (H) × 23.1 mm (D)
(3.8 × 2.2 × 0.9 in.) (excluding protrusions)
FE-4020/X-940: 95.0 mm (W) × 56.2 mm (H) × 22.8 mm (D)
(3.7 × 2.2 × 0.9 in.) (excluding protrusions)
:
FE-4040: 137 g (4.8 oz) (including battery and card)
FE-4020/X-940: 128 g (4.5 oz) (including battery and card)
EN 59
Lithium ion battery (LI-70B)
Product type
:
:
:
:
Lithium ion rechargeable battery
DC 3.7 V
Standard voltage
Standard capacity
Battery life
650 mAh
Approx. 300 full charges (varies on usage)
Operating environment
Temperature
:
0°C to 40°C (32°F to 104°F) (charging)/
-10°C to 60°C (14°F to 140°F) (operation)/
-20°C to 35°C (-4°F to 95°F) (storage)
Dimensions
Weight
:
:
32.2 mm (W) × 40.5 mm (H) × 5.1 mm (D) (1.3 × 1.6 × 0.2 in.)
Approx. 15 g (0.5 oz)
USB-AC adapter (F-2AC)
Model No.
:
:
:
:
F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B
AC 100 to 240 V (50/60 Hz)
DC 5 V, 500 mA
Power requirements
Output
Charging time
Operating environment
Temperature
Approx. 3 hours
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Dimensions
Weight
:
:
50.0 mm (W) × 54.0 mm (H) × 22.0 mm (D) (2.0 × 2.1 × 0.9 in.)
Approx. 46 g (1.6 oz) (F-2AC-1A)/Approx. 42 g (1.5 oz) (F-2AC-2A)/
Approx. 44 g (1.6 oz) (F-2AC-1B)/Approx. 40 g (1.4 oz) (F-2AC-2B)
Design and specifications subject to change without notice.
60 EN
VN708601
|