DIGITAL CAMERA
VG-160
Instruction Manual
● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these
instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for
future reference.
● We recommend that you take test shots to get accustomed to your camera before taking important photographs.
● In the interest of continually improving our products, Olympus reserves the right to update or modify information
contained in this manual.
● The screen and camera illustrations shown in this manual were produced during the development stages and may
differ from the actual product.
Camera Settings
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Shutter button (p. 20)
Zoom buttons (p. 21)
R button (shooting movies) (p. 20)
qbutton (switch between shooting and
playback) (p. 20, 22)
MENU
m button (p. 5)
E button (menu guide) (p. 25)
Arrow pad
The symbols FGHI displayed for image
selections and settings indicate that the arrow pad
is to be used.
F (up) /
INFO button (change information
display) (p. 22, 25)
X
Y
M
D
Time
Y/M/D
2011.02.26 12:30
4/30
H (left)
I (right)
MENU
OK
Set
Cancel
14M
NORM
FILE
100 0004
’11/02/26 12:30
Q button
(p. 17)
OK
Print
More
Single Print
G (down) /
D button (erase) (p. 24)
EN
3
Using the Menu
Use the menu to change camera settings such as the shooting mode.
There may be menus that are unavailable depending on other related settings or the s mode (p. 26).
Function menu
Press H during shooting to display the function menu. The function menu is used to choose the shooting mode
and provides access to frequently used shooting settings.
Shooting mode
Selected option
Program Auto
P
P
0.0
WB
AUTO
ISO
Function menu
AUTO
14M
4
Shooting
Setup menu (p. 5)
To select the shooting mode
Use HI to select a shooting mode and press the Q button.
To select the function menu
Use FG to select a menu and use HI to select a menu option. Press the Q
button to set the function menu.
4
EN
Setup menu
Press the m button during shooting or playback to display the setup menu. The setup menu provides access
to a variety of camera settings, including options not listed in the function menu, display options, and the time and
date.
1
Press the m button.
● The setup menu is displayed.
4
Use FG to select the desired submenu 2
and then press the Q button.
● Once a setting is selected, the display returns to
the previous screen.
1
Reset
2
Image Size
Compression
AF Mode
14M
Normal
Face/iESP
Off
There may be additional operations.
“Menu Settings” (p. 34 to 46)
1
2
Digital Zoom
AF Illuminat.
Icon Guide
On
1
Pixel Mapping
On
2
Bright
Exit MENU
OK
Set
Video Out
NTSC
On
Power Save
1
2
English
2
Press H to highlight the page tabs. Use
FG to select the desired page tab and
press I.
World Time
Exit MENU
OK
Set
Page tab
Submenu 1
5
Press the m button to complete the
setting.
1
1
2
Pixel Mapping
Pixel Mapping
2
Bright
NTSC
Off
Bright
Video Out
Video Out
NTSC
Off
Power Save
Power Save
1
English
1
English
2
2
World Time
World Time
Exit MENU
OK
Exit MENU
OK
Set
Set
3
Use FG to select the desired submenu 1
and then press the Q button.
Submenu 2
1
2
1
2
Pixel Mapping
Pixel MappinPower Save
Bright
NTSC
Off
Video Out
Video Out
Power Save
W
Off
Power Save
On
1
2
English
1
2
World Time
World Time
Exit MENU
OK
Back MENU
OK
Set
Set
EN
5
Menu Index
Menus for Shooting Functions
Program Auto
1
P
9
1
2
1
2
Reset
Image Size
Frame Rate
VGA
30fps
On
2
3
4
5
6
7
8
Image Size
Compression
AF Mode
14M
Normal
Face/iESP
Off
1
2
Digital Zoom
AF Illuminat.
Icon Guide
1
2
0.0
On
WB
AUTO
On
ISO
AUTO
Exit MENU
OK
Exit MENU
OK
Set
Set
14M
4
Digital Zoom................p.36
AF Illuminat. ................p.36
Icon Guide...................p.37
q (Shooting menu 2)
Date Stamp .................p.37
A (Movie menu)
Image Size ..................p.35
Frame Rate .................p.35
R (Movie sound
1 Shooting mode
5 Exposure compensation...p.31
6 White balance...................p.32
7 ISO ...................................p.32
8 Drive.................................p.33
9 m (Setup) X
P (Program Auto).............p.19
M (iAUTO)...................p.26
N (DIS Mode)................p.26
s (Scene Mode) .........p.26
P (Magic Filter) ..........p.28
~ (Panorama)..................p.29
2 Flash.................................p.30
3 Macro ...............................p.30
4 Self-timer..........................p.31
p (Shooting menu 1)
Reset...........................p.34
Image Size ..................p.34
Compression...............p.34
AF Mode......................p.35
recording) ..................p.36
6
EN
Menus for Playback, Editing, and Printing Functions
1 q(Playback menu)
Slideshow..................... p.38
Edit ......................... p.38, 39
Erase............................ p.39
Print Order.................... p.40
? (Protect).................... p.40
y (Rotate).................... p.40
1
Slideshow
2
Edit
Erase
1
Print Order
1
2
?
y
Exit MENU
OK
Set
Menus for Other Camera Settings
1 r (Settings 1)
Memory Format/
Format.......................... p.41
Backup ......................... p.41
USB Connection........... p.41
2 s (Settings 2)
1
2
Format
Pixel Mapping............... p.43
s (Monitor)................ p.43
Video Out...................... p.44
Power Save.................. p.45
W (Language)............ p.45
X(Date/time)............. p.45
World Time ................... p.46
Backup
USB Connection Storage
q Power On
Yes
Yes
On
K
1
2
1
Keep
Settings
qPower On ............... p.42
K
2
Pw On Setup
Keep
Settings......... p.42
Pw On Setup ................ p.42
Sound Settings............. p.43
Sound Settings
Exit MENU
OK
Set
EN
7
Names of PParts
Camera unit
1
2
Multi-connector
..................p.14, 16, 44, 47
Connector cover
5
6
1
2
..................p.14, 16, 44, 47
Strap eyelet .................... p.9
Battery/card compartment
cover........................... p.12
Flash............................. p.30
Self-timer lamp ............. p.31
AF illuminator ............... p.36
Lens........................ p.59, 73
Microphone............. p.36, 38
Speaker
3
4
7
3
5
6
7
8
9
8
9
10 Tripod socket
4
10
8
EN
1
2
3
4
5
6
n button........ p.17, 19
Shutter button............... p.20
Monitor ................... p.19, 54
Zoom buttons ............... p.21
Indicator lamp......... p.14, 16
R button
1
2
4
(shooting movies) ....... p.20
7 qbutton
(switch between shooting
5
6
7
8
9
and playback) ....... p.20, 22
Q button (OK).......... p.4, 17
Arrow pad....................... p.3
INFO button
(change information
display) ................. p.22, 25
D button (erase) .......... p.24
10 E button (menu guide)
.................................... p.25
11 m button.................. p.5
8
9
3
10
11
Attachhing the camera sstrap
Pull the strap tight so that it does not come loose.
EN
9
Monitor
Shooting mode display
1
2
3
Battery check................ p.16 14 Compression
1
2
Shooting mode ....... p.19, 26
(still images)................ p.34
P
Flash............................. p.30 15 Image size
22
3
Flash standby/flash charge
(still images)................ p.34
4
.................................... p.54 16 Number of storable pictures
5
21
20
19
18
17
0.0
6
4
5
6
Macro ........................... p.30
Self-timer...................... p.31 17 Current memory ........... p.61
Exposure compensation 18 Movie recording icon .... p.20
.................................... p.31 19 Continuous recording length
White balance............... p.32 (movies)...................... p.20
ISO ............................... p.32 20 Image size
Drive............................. p.33 (movies)...................... p.35
(still images)................ p.19
WB
7
AUTO
ISO
8
AUTO
VGA
0:34
9
14M
DATE
#
z
4
NORM
10
7
8
9
16 15 14 13 12 11
1/100 F2.8
10 Setup menu.................... p.5 21 AF target mark.............. p.20
11 Recording with sound 22 Camera shake warning
24 23
(movies)...................... p.36 23 Aperture value.............. p.20
12 Date stamp................... p.37 24 Shutter speed............... p.20
13 World time .................... p.46
10 EN
Playback moode display
1
2
Battery check................ p.16
Print reservation/number of
prints...................p.51/p.49
Protect.......................... p.40
Adding sound ............... p.38
Current memory ........... p.61
Frame number/
● Normal display
1
2
3
4
5
6
1
6
3
4
5
6
10
4/30
total number of images
(still images)................ p.22
Elapsed time/
total recording time
17
00:12/00:34
’11/02/26 12:30
15
(movies)...................... p.23
Shooting mode ....... p.19, 26
Shutter speed............... p.20
Aperture value.............. p.20
10 ISO ............................... p.32
11 Exposure compensation
.................................... p.31
12 White balance............... p.32
13 Image size.............. p.34, 35
14 File number
Still image
● Detailed display
Movie
7
8
9
1
2
3
4
5
6
7
8
9
10 11
10
4/30
1/1000 F2.8
2.0
ISO WB
12
13
P
100 AUTO
1/1000 F2.8
2.0
14M
NORM
ISO WB
P
100 AUTO
FILE
14M
14
15
NORM
100 0004
15 Date and time............... p.17
16 Compression
FILE
100 0004
’11/02/26 12:30
’11/02/26 12:30
(still images)................ p.34
Frame rate
16
(movies)...................... p.35
17 Volume ......................... p.43
EN 11
Preparing tthe Caamera
Inserting the battery and the SD/SDHC
memory card (sold separately)
Insert the battery with the C symbol on the same
side as the battery lock knob. Damage to the battery
exterior (scratches, etc.) may produce heat or an
explosion.
Always use SD/SDHC memory cards with this
camera. Do not insert any other types of memory
card.
Insert the battery while sliding the battery lock knob in
the direction of the arrow.
Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
2
1
Turn off the camera before opening the battery/card
compartment cover.
1
Battery/card
compartment
cover
When using the camera, be sure to close the battery/
card compartment cover.
Insert the card straight until it clicks into place.
Do not touch the contact area directly.
2
Battery lock
knob
3
1
2
This camera allows the user to take pictures using the
internal memory even when no SD/SDHC memory
card (sold separately) is inserted.
Write-protect switch
“Using an SD/SDHC memory card” (p. 60)
“Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
SD/SDHC memory cards” (p. 62)
12 EN
To remove the SD/SDHC memoryy card
Windows
Insert the supplied CD in a CD-ROM drive.
1
2
1
Windows XP
● A “Setup” dialog will be displayed.
Windows Vista/Windows 7
● An Autorun dialog will be displayed. Click
“OLYMPUS Setup” to display the “Setup” dialog.
Press the card in until it clicks and comes out slightly,
then grab the card and pull it out.
Charging the battery and setting up
using the supplied CD
Connect the camera to the computer to charge the battery
and use the supplied CD for setup.
User registration using the supplied CD and
installation of [ib] computer software is available on
Windows computers only.
The camera battery can be charged while the camera is
connected to a computer.
● The indicator lamp lights during charging and turns
off when charging is complete.
If the “Setup” dialog is not displayed, select “My
Computer” (Windows XP) or “Computer” (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
“OLYMPUS Setup” window and then double-click
“Launcher.exe”.
Charging takes up to 3 hours.
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, computer,
or USB cable may not be functioning as expected.
If a “User Account Control” dialog is displayed, click
“Yes” or “Continue”.
We recommend that you use a computer equipped
with Windows XP (Service Pack 2 or later), Windows
Vista, or Windows 7. See “Charging the battery with
the supplied USB-AC adapter” (p. 16) if you are using
a different computer or wish to charge the battery
without using a computer.
EN 13
OLYMPUS Viewer 2
Follow the on-screen instructions on your
computer.
2
Operating
System
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
If nothing is displayed on the camera screen even
after connecting the camera to the computer, the
battery may be exhausted. Leave the camera
connected to the computer until the battery has
charged, then disconnect and reconnect the camera.
Processor
Pentium 4 1.3 GHz or better
1 GB or more (2 GB or more
recommended)
RAM
Free Hard
Drive Space
1 GB or more
Connecting the camera
1024 × 768 pixels or more
Minimum 65,536 colors
(16,770,000 colors recommended)
Monitor
Settings
Multi-connector
[ib]
Operating
System
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
Pentium 4 1.3 GHz or better
(Pentium D 3.0 GHz or better required
for movies)
Indicator lamp
Connector cover
Processor
Computer (on and running)
512 MB or more (1 GB or more
recommended)
(1 GB or more required for movies—2 GB
or more recommended)
RAM
USB cable (supplied)
Free Hard
Drive Space
1 GB or more
Register your Olympus product.
● Click the “Registration” button and follow the on-
screen instructions.
1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000
colors recommended)
3
4
Monitor
Settings
A minimum of 64 MB video RAM with
DirectX 9 or later.
Graphics
Install OLYMPUS Viewer 2 and [ib] computer
software.
● Check the system requirements before beginning
*
See online help for information on using the software.
installation.
Install the camera manual.
● Click the “Camera Instruction Manual” button and
follow the on-screen instructions.
5
● Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”
button and follow the on-screen instructions to
install the software.
14 EN
Macintosh
Install OLYMPUS Viewer 2.
● Check the system requirements before beginning
installation.
2
Insert the supplied CD in a CD-ROM drive.
● Double-click the CD (OLYMPUS Setup) icon on
the desktop.
1
● Click the “OLYMPUS Viewer 2” button and follow
the on-screen instructions to install the software.
● Double-click the “Setup” icon to display the “Setup”
dialog.
OLYMPUS Viewer 2
Operating
System
Mac OS X v10.4.11–v10.6
Processor
Intel Core Solo/Duo 1.5 GHz or better
1 GB or more (2 GB or more
recommended)
RAM
Free Hard
Drive Space
1 GB or more
1024 × 768 pixels or more
Minimum 32,000 colors (16,770,000
colors recommended)
Monitor
Settings
*
Other languages can be selected from the language
combo box. For information on using the software, see
online help.
Copy the camera manual.
3
● Click the “Camera Instruction Manual” button to
open the folder containing the camera manuals.
Copy the manual for your language to the
computer.
EN 15
Charging the battery with the supplied
USB-AC adapter
2
Indicator lamp
On: Charging
Off: Charged
The included F-2AC USB-AC adapter (hereafter
referred to as USB-AC adapter) differs depending on
the region where you purchased the camera.
The battery is not fully charged at the time of
purchase. Before use, be sure to charge the battery
until the indicator lamp turns off (up to 3 hours).
The supplied USB-AC adapter is for charging and
playback only. Do not take pictures while the USB-AC
adapter is connected to the camera. The camera
cannot playback without the battery even when
connected to the USB-AC adapter.
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, or USB-
AC adapter may not be functioning as expected.
For details on the battery and the USB-AC adapter,
see “The battery and USB-AC adapter” (p. 59).
1
USB cable
(supplied)
USB cable
(supplied)
The battery can be charged while the camera is
connected to the computer. Charging time varies
depending on the performance of a computer. (There
may be cases in which it takes approx. 10 hours.)
USB
connector
USB
connector
When to charge the batteries
Charge the battery when the error message shown below
appears.
Multi-
connector
Multi-
connector
Flashes in red
Connector
cover
Connector
cover
Battery Empty
AC outlet
AC outlet
14M
4
Monitor top left
Error message
16 EN
Operation guide
Date, time, time zone, and language
Operation guides displayed at the bottom of the screen
indicate that the m button, Q button, or zoom buttons
should be used.
The date and time set here are saved to image file names,
date prints, and other data. You can also choose the
language for the menus and messages displayed in the
monitor.
1
Reset
2
Image Size
Compression
AF Mode
14M
Normal
Face/iESP
Off
Press the n button to turn on the
camera.
● The date and time setting screen is displayed when
1
1
2
Digital Zoom
AF Illuminat.
Icon Guide
On
the date and time are not set.
On
Exit MENU
OK
Set
X
Y
M
D
Time
OK
Set
---- -- -- -- --
.
Y/M/D
.
:
OK
MENU
Erase/Cancel
Operation guide
MENU
Cancel
Date and time setting screen
Use FG to select the year for [Y].
2
X
Y
M
D
Time
-- -- -- --
.
Y/M/D
2011.
:
MENU
Cancel
EN 17
Press I to save the setting for [Y].
3
X
Y
M
D
Time
-- -- -- --
.
Y/M/D
2011.
:
MENU
Cancel
As in Steps 2 and 3, use FGHI and the
Q button to set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order).
4
5
For a more accurate setting, press the Q button
when the time signal hits 00 seconds while setting the
minutes.
The menus can be used to change the selected date
and time. [X] (Date/time) (p. 45)
Use HI to select your home time zone and
press the Q button.
● Use FG to turn daylight saving time ([Summer])
on or off.
’11.02.26.12:30
Seoul
Tokyo
OK
Set
Summer
The menus can be used to change the selected time
zone. [World Time] (p. 46)
Use FGHI to select your language and
press the Q button.
6
The menus can be used to change the selected
language. [W] (Language) (p. 45)
18 EN
Shooting, Viewinng, and EErasing
Shooting with the optimum aperture
value and shutter speed
[Program Auto]
Current shooting mode display
Program Auto
P
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
0.0
WB
AUTO
ISO
AUTO
14M
4
Press the n button to turn on the
camera.
1
Press the n button again to turn off the camera.
[Program Auto] indicator
Hold the camera and compose the shot.
2
P
Monitor
0.0
WB
AUTO
ISO
AUTO
#
14M
4
Horizontal grip
Number of storable still pictures (p. 62)
Monitor (standby mode screen)
If the [Program Auto] indicator is not displayed, press
H to display the function menu and then set the
shooting mode to P.
“Using the Menu” (p. 4)
Vertical grip
When holding the camera, take care not to cover the
flash with your fingers, etc.
EN 19
Shooting movies
Press the shutter button halfway down to
focus on the subject.
● When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
3
Press the R button to start recording.
1
● The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
AF target mark
0:34
P
REC
0:00
Continuous
recording
length (p. 62)
0:34
Press halfway
REC
0:00
1/400 F2.8
Current length
Lights up red when recording
Sound will also be recorded.
Shutter speed Aperture value
“Focusing” (p. 56)
To take the picture, gently press the shutter
button all the way down while being careful
not to shake the camera.
4
The shooting mode selected for still photography
applies to movies (some shooting modes have no
effect).
Press the R button again to end recording.
P
2
During sound recording, only the digital zoom can be
used. To record a movie with optical zoom, set [R]
(Movie sound recording) (p. 36) to [Off].
Press fully
1/400 F2.8
Image review screen
To view images during shooting
Pressing the qbutton enables playback of images. To
return to shooting, either press the qbutton or press the
shutter button halfway down.
20 EN
To take larger images [Digital Zoom]
Using the zoom
The type and amount of zoom can be identified from
the appearance of the zoom bar. The display differs
depending on the options selected for [Digital Zoom]
(p. 36) and [Image Size] (p. 34).
Pressing the zoom buttons adjusts the shooting range.
Pressing the wide
(W) button
Pressing the telephoto
(T) button
[Off] selected for [Digital Zoom]:
Image size
Zoom bar
Zoom bar
14M
P
P
Optical zoom range
0.0
0.0
WB
WB
Other
AUTO
AUTO
ISO
ISO
Image zoomed and cropped.*1
AUTO
AUTO
#
#
14M
14M
4
4
[On] selected for [Digital Zoom]:
Image size Zoom bar
Optical zoom: 5×
Digital zoom: 4×
14M
Digital zoom range
Image zoomed and
cropped.*1
Other
Digital zoom range
*1
If an image size is less than the full resolution after
reaching the maximum optical zoom, the camera will
automatically resize and crop the image to the selected
image size and enter the digital zoom range if [Digital
Zoom] is [On].
Photographs taken with the zoom bar displayed in
red may appear “grainy.”
EN 21
Changing the shooting information
display
Viewing images
Press the q button.
1
The display of the screen information can be changed to
best match the situation, for example, the need for a clear
view of the screen or for making a precise composition by
using the grid display.
Number of frames/Total number of images
4/30
Press F (INFO).
1
● The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 10)
’11/02/26 12:30
Normal
P
Playback image
Use HI to select an image.
2
0.0
WB
AUTO
No information
ISO
AUTO
P
14M
4
Displays
previous image
Displays next
image
Detailed
P
Hold I to fast forward and hold H to reverse.
The display size of the images can be changed.
“Index view and close-up view” (p. 24)
0.0
WB
AUTO
ISO
AUTO
To play sound recordings
14M
4
NORM
To play sound recorded with an image, select the image
and press the Q button. A ! icon appears on images
with which sound has been recorded.
[R] (still images) (p. 38)
During audio playback
Press FG to adjust volume.
22 EN
To play back movies
Operations during pausing playback
Select a movie, and press the Q button.
4/30
00:14/00:34
OK
Movie Play
’11/02/26 12:30
During pause
Movie
Press F to display the first frame
and press G to display the last
frame.
Cueing
Operations during movie playback
Press I or H to advance or
rewind one frame at a time. Hold
I or H pressed for continuous
advance or rewind.
Advancing and
rewinding one
frame at a time
Resuming
playback
Press the Q button to resume
playback.
Elapsed time/
Total recording time
00:12/00:34
During playback
To stop movie playback
Press the m button.
Press the Q button to pause
playback. To resume playback
during pause, fast forward, or
rewind, press the Q button.
Pausing and
resuming
playback
Press I to fast forward. Press I
again to increase the fast forward
speed.
Fast forward
Rewind
Press H to rewind. The rewinding
speed increases each time H is
pressed.
Adjusting the
volume
Use FG to adjust the volume.
EN 23
Erasing images during playback
(Single image erase)
Index view and close-up view
Index view enables quick selection of a desired image.
Close-up view (up to 10× magnification) allows checking
of image details.
Display the image you want to erase and
press G (D).
1
Press the zoom buttons.
1
Erase
Erase
Cancel
Single-image view
Close-up view
MENU
OK
Set
Cancel
4/30
4/30
W
T
Press FG to select [Erase], and press the
2
Q button.
For erasing multiple images at the same time, see
“Erasing images [Erase]” (p. 39).
’11/02/26 12:30
’11/02/26 12:30
W
T
Index view
’11/02/26
2
4
W
T
’11/02/26
2
4
24 EN
To select an image in index view
Use FGHI to select an image, and press the Q
button to display the selected image in single-image view.
Using the menu guide
Pressing the E button in the setup menu displays a
description of the current item.
To scroll an image in close-up view
“Using the Menu” (p. 4)
Use FGHI to move the viewing area.
Changing the image information
display
Shooting information settings displayed on the screen can
be changed.
Press F (INFO).
1
● The displayed image information changes in
the order shown below each time the button is
pressed.
Normal
10
4/30
No information
’11/02/26 12:30
Detailed
10
4/30
1/1000 F2.8
2.0
ISO WB
100 AUTO
P
14M
NORM
FILE
100 0004
’11/02/26 12:30
EN 25
Using Shootiing Modes
To change the shooting mode
Reducing blur on shooting (
N
mode)
The shooting mode (P, M, N, s, P, ~)
can be changed by using the function menu.
“Using the Menu” (p. 4)
This mode enables the user to reduce blur that is caused
by camera shake and subject movement.
The default settings of the function are highlighted in
.
Set the shooting mode to N.
1
N mode indicator
Shooting with automatic settings
M
(
mode)
According to the scene, the camera automatically selects
the optimal shooting mode from [Portrait]/[Landscape]/
[Night+Portrait]/[Sport]/[Macro]. This is a fully automatic
mode that allows the user to take pictures using the
best mode for the shooting scene simply by pressing the
shutter button.
0.0
WB
AUTO
#
14M
4
Using the best mode for the shooting
Set the shooting mode to M.
1
s
scene (
mode)
The icon changes depending on the scene
that the camera automatically selects.
Set the shooting mode to s.
1
Scene Mode
#
14M
4
14M
4
In some cases, the camera may not select the
desired shooting mode.
When the camera cannot identify which is the optimal
mode, [Program Auto] will be selected.
There are some limitations on settings in M mode.
26 EN
Option
Application
Press G to go to the submenu.
2
3
BPortrait/FLandscape/
GNight Scene*1/MNight+Portrait/ The camera takes
Portrait
CSport/NIndoor/WCandle*1
/
a picture using the
optimum settings
for the scene
RSelf Portrait/SSunset*1
/
XFireworks*1/VCuisine/
K
dDocuments/
Beach & Snow/
conditions.
Pet
*1
When the subject is dark, noise reduction is
automatically activated. This approximately doubles the
shooting time during which no other pictures can be
taken.
14M
4
Use HI to select the best shooting mode for
the scene, and press the Q button.
To take pictures of a moving subject like a
pet ([ Pet])
1 Use HI to select [ Pet], and press the Q button
to set.
2 Hold the camera to align the AF target mark on the
subject and press the Q button.
● When the camera recognizes the subject, the
AF target mark automatically tracks the subject
movement to focus on it continuously. “To focus
on a moving subject continuously (AF Tracking)”
(p. 35).
#
14M
4
Icon indicating current s mode
s
In
mode, the optimum shooting settings are
pre-programmed for specific shooting scenes.
For this reason, some settings cannot be changed in
some modes.
EN 27
Shooting with special effects
Use HI to select the desired effect and then
press the Q button to set.
3
P
(
mode)
Add an artistic effect to your photo by selecting the
desired magic filter.
Set the shooting mode to P.
1
Magic Filter
0.0
WB
AUTO
#
14M
4
Icon indicating current P mode
0.0
WB
AUTO
Shooting mode
Option
14M
4
[Pop Art
\Pin Hole
]Fish Eye
@Drawing*1
;Soft Focus
:Punk
Press G to go to the submenu.
2
Magic Filter
Pop Art
jSparkle
*1
Two images are saved, an unmodified image and an
0.0
image to which the effect has been applied.
WB
AUTO
In P mode, the optimum shooting settings are
pre-programmed for each effect. For this reason,
some settings cannot be changed in some modes.
28 EN
Creating panoramic images (
~
mode)
Press the shutter button to take the first
frame, and then compose the second shot.
3
Take pictures that can be joined to form a panorama using
the supplied software.
Before first shot
The focus, exposure, zoom position (p. 21), and white
balance (p. 32) are locked at the first frame.
The flash (p. 30) is fixed to $(Flash Off) mode.
Set the shooting mode to ~.
1
Panorama
P
OK
Set
0.0
WB
AUTO
ISO
AUTO
After first shot
14M
4
Use FGHI to select the pan direction.
2
1
2
MENU
Exit
● After the first shot, the area shown in the white
frame reappears on the side of the display
opposite the pan direction. Frame subsequent
photographs so that they overlap with the
image on the monitor.
Repeat Step 3 until the number of desired
frames is taken, and then press the
m button when finished.
4
Panorama shooting is possible for up to 10 frames.
For information on creating panoramas, see the
online help for the supplied software.
EN 29
Using Shoootingg Functtions
“Using the Menu” (p. 4)
Shooting closeups (Macro shooting)
The default settings of the function are highlighted in
.
This function enables the camera to focus and shoot
subjects at close distances.
Using the flash
Select the macro option in the shooting
function menu.
1
The flash functions can be selected to best match the
shooting conditions.
P
Select the flash option in the shooting
function menu.
Off
1
0.0
WB
AUTO
P
ISO
AUTO
Flash Auto
14M
4
0.0
WB
AUTO
Use HI to select the setting option, and
press the Q button to set.
ISO
2
AUTO
14M
4
Option
Description
Off
Macro mode is deactivated.
This enables shooting as close as
Use HI to select the setting option, and
press the Q button to set.
2
Macro
20 cm/7.9 in.*1 (60 cm/23.6 in.*2) to
the subject.
Option
Flash Auto
Description
The flash fires automatically in low-
light or backlight conditions.
This enables shooting as close as
5 cm/2.0 in. to the subject.
Super Macro*3
*1
Pre-flashes are emitted to reduce the
occurrence of red eye in your photos.
When the zoom is at the widest (W) position.
When the zoom is at the most telephoto (T) position.
The zoom is automatically fixed.
Redeye
*2
*3
The flash fires regardless of the
Fill In
available light.
The flash (p. 30) and zoom (p. 21) cannot be set
during super macro shooting.
Flash Off
The flash does not fire.
30 EN
Using the self-timer
Adjusting the brightness
(Exposure compensation)
After the shutter button is pressed all the way down, the
picture is taken after a short delay.
The standard brightness (appropriate exposure) set by
s
the camera based on the shooting mode (M and
excluded) can be adjusted brighter or darker to obtain a
desired shot.
Select the self-timer option in the shooting
function menu.
1
P
Select the exposure compensation option in
the shooting function menu.
1
Y
Off
2
12
Exposure Comp.
P
0.0
WB
0.0
AUTO
ISO
AUTO
0.3 0.0 0.3
14M
4
WB
AUTO
ISO
AUTO
Use HI to select the setting option, and
press the Q button to set.
2
#
Option
Description
Use HI to select the desired brightness,
and press the Q button.
2
YOff
The self-timer is deactivated.
The self-timer lamp turns on for
approx. 10 seconds, then blinks for
approx. 2 seconds, and then the
picture is taken.
Y12 sec
The self-timer lamp blinks for approx.
2 seconds, and then the picture is
taken.
Y2 sec
Self-timer shooting is automatically canceled after
one shot.
To cancel the self-timer after it starts
Press the m button.
EN 31
Adjusting to a natural color scheme
(White balance)
Selecting the ISO sensitivity
Select the ISO setting option in the shooting
1
For more natural coloring, choose a white balance option
suited to the scene.
function menu.
P
Select the white balance option in the
shooting function menu.
1
WB
P
0.0
WB
WB Auto
AUTO
ISO
ISO
ISO
ISO 200
100 200 400
1/400 F2.8
0.0
WB
AUTO
ISO
AUTO
Use HI to select the setting option, and
press the Q button to set.
2
Option
Description
Use HI to select the setting option, and
press the Q button to set.
2
The camera automatically adjusts the
sensitivity according to the shooting
scene.
ISO Auto
Value
Option
Description
The ISO sensitivity is fixed to the
selected value.
The camera automatically adjusts
the white balance according to the
shooting scene.
WB Auto
“ISO” is short for “International Organization
for Standardization.” ISO standards specify the
sensitivity for digital cameras and film, thus codes
such as “ISO 100” are used to represent sensitivity.
For shooting outdoors under a
clear sky.
5
3
1
Sunny
For shooting outdoors under a
cloudy sky.
Cloudy
In the ISO setting, although smaller values result in
less sensitivity, sharp images can be taken under fully
lit conditions. Larger values result in higher sensitivity,
and images can be taken at fast shutter speeds even
under low light conditions. However, high sensitivity
introduces noise into the resulting picture, which may
give it a grainy appearance.
For shooting under tungsten
lighting.
Incandescent
Fluorescent
For shooting under white
fluorescent lighting (offices, etc.).
>
32 EN
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter button
is held down.
Select the drive option in the shooting
function menu.
1
P
0.0
WB
AUTO
ISO
AUTO
Sequential
MENU
Option
Description
One frame is shot each time the
shutter button is pressed.
o
Single
Take sequential shots using the
j*1 Sequential focus, brightness (exposure) and
white balance set in the first frame.
The camera takes sequential shots
at a faster speed than in [j].
High-
c
d
Speed1
The camera takes sequential shots
at approximately 10 frames/sec.
High-
Speed2
*1
The shooting speed varies depending on the settings
for [Image Size/Compression] (p. 34).
When set to [j], the flash (p. 30) cannot be set to
[Redeye]. In addition, when set to [c] or [d], the
flash is fixed to [Flash Off].
When set to [c] or [d], [Image Size] is limited to
[3] or lower, and the ISO sensitivity is fixed to [ISO
Auto].
EN 33
For information on using the menus, see “Using the Menu” (p. 4).
Menus forr Shootiing Funncctions
The default settings of the function are highlighted in
.
Restoringg the shooting functions to the default ssettinggss [[RReeset]
p
(Shooting menu 1) X Reset
Submenu 2
Application
Restores the following menu functions to the default settings.
• Shooting mode (p. 26)
• Flash (p. 30)
• Macro (p. 30)
• Exposure compensation (p. 31)
• White balance (p. 32)
• ISO (p. 32)
• Menu functions in z
(Shooting menu)/A
(Movie menu) (p. 34 to 37)
Yes
• Self-timer (p. 31)
• Drive (p. 33)
No
The current settings will not be changed.
Selecting the image quality for still images [Image Size/Compression]
p
(Shooting menu 1) X Image Size/Compression
Submenu 1
Submenu 2
Application
14M (4288×3216) Suitable for printing pictures at A3 (11×17 in.).
8M (3264×2448)
5M (2560×1920)
3M (2048×1536)
2M (1600×1200)
1M (1280×960)
VGA (640×480)
Suitable for printing pictures up to A3 (11×17 in.).
Suitable for printing pictures at A4 (8.5×11 in.).
Suitable for printing pictures up to A4 (8.5×11 in.).
Suitable for printing pictures at A5 (5×7 in.).
Image Size
Suitable for printing pictures at postcard size.
Suitable for viewing pictures on a TV or using pictures on emails and web sites.
16:9S (1920×1080) Suitable for playing pictures on a widescreen TV and for printing on A5 or 5"×7".
Fine
Shooting at high quality.
Compression
Normal
Shooting at normal quality.
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/
SDHC memory cards” (p. 62)
34 EN
For information on using the menus, see “Using the Menu” (p. 4).
Selectiing the image quality for movies
[Image Size/Frame Rate]
Selectting the focusing area [AF Mode]
p
(Shooting menu 1) X AF Mode
A
(Movie menu)
X
Image Size/Frame Rate
Submenu 2
Application
Submenu 1
Submenu 2
Application
The camera focuses automatically.
(If a face is detected, it is shown by
a white frame*1; when the shutter
button is pressed halfway and the
camera is able to focus, the frame
color is changed to green*2 if the
camera is able to focus. If no face
is detected, the camera chooses a
subject in the frame and focuses
automatically.)
Select the image
quality based on
the image size and
frame rate. Higher
frame rates provide
smoother movie
images.
720P (1280×720)/
VGA (640×480)/
QVGA (320×240)
Image Size
Face/iESP
N30fps*1
/
Frame Rate
O15fps*1
*1
frames per second
“Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
SD/SDHC memory cards” (p. 62)
The camera focuses on the subject
located within the AF target mark.
Spot
The camera tracks the subject
movement automatically to focus on
it continuously.
AF Tracking
*1
For some subjects, the frame may not appear or may
take some time to appear.
If the frame blinks in red, the camera is unable to focus.
Try again to press the shutter button halfway.
*2
To focus on a moving subject
continuously (AF Tracking)
1 Hold the camera to align the AF target mark on the
subject and press the Q button.
2 When the camera recognizes the subject, the AF
target mark automatically tracks the subject movement
to focus on it continuously.
3 To cancel the tracking, press the Q button.
Depending on the subjects or the shooting conditions,
the camera may be unable to lock the focus or fail to
track the subject movement.
When the camera fails to track the subject movement,
the AF target mark changes to red.
EN 35
For information on using the menus, see “Using the Menu” (p. 4).
Shooting at higher magnificatioons than
optical zoom [Digital Zoom]
Using the AAF illummiinator too focus on a
shadowed suubject [[AF Illuuminat..]
p
p
(Shooting menu 1) X Digital Zoom
(Shooting menu 1) X AF Illuminat.
Submenu 2
Application
Disable digital zoom.
Submenu 2
Application
Off
On
The AF illuminator is not used.
Off
On
When the shutter button is pressed
halfway down, the AF illuminator
turns on to aid focusing.
Enable digital zoom.
[Digital Zoom] is not available when [% Super
Macro] (p. 30) is selected.
AF illuminator
The option selected for [Digital Zoom] affects the
appearance of the zoom bar.
“To take larger images [Digital Zoom]” (p. 21)
Recording sound when shooting
movies [R]
A (Movie menu) X R
Submenu 2
Application
No sound is recorded.
Sound is recorded.
Off
On
When set to [On], only the digital zoom can be used
during movie recording. To record the movie with the
optical zoom, set [R] (movies) to [Off].
36 EN
For information on using the menus, see “Using the Menu” (p. 4).
Displaying icon guides [Icon Guide]
Imprinting the date of recording
[Date SStamp]
p
(Shooting menu 1) X Icon Guide
q
(Shooting menu 2) X Date Stamp
Submenu 2
Application
Submenu 2
Application
Off
No icon guide is displayed.
Off
On
Do not imprint the date.
The explanation of the selected icon
will be displayed when a shooting
mode or shooting function menu
icon is selected (position the cursor
on the icon for a while to display the
explanation).
Stamp new photographs with the
date of recording.
On
[Date Stamp] is not available if the clock has not been
set.
“Date, time, time zone, and language” (p. 17)
Program Auto
P
The date stamp can not be deleted.
Functions can be
changed manually.
[Date Stamp] is not available in ~ mode or during
sequential shooting.
Icon guide
0.0
WB
AUTO
ISO
AUTO
14M
4
EN 37
For information on using the menus, see “Using the Menu” (p. 4).
Menus forr Playbback, EEditingg, and PPrintinng Funcctions
Playing back pictures automatically
[Slideshow]
Cropping images [P]
q(Playback menu) X Edit X P
q(Playback menu) X Slideshow
1 Use HI to select an image, and press the Q button.
2 Use the zoom buttons to choose the crop size and
FGHI to position the crop.
To start a slideshow
After pressing the Q button, the slideshow starts. To stop
the slideshow, press the Q button or the m button.
During a slideshow, press I to advance one frame,
H to go back one frame.
Changing the image size [Q]
q(Playback menu) X Edit X Q
OK
Set
3 Press the Q button.
Submenu 2
Application
● The edited image will be saved as a separate
This saves a high-resolution image
as a separate image with a smaller
size for use in e-mail attachments
and other applications.
image.
8 640 × 480
9 320 × 240
Adding sound to still images [R]
q(Playback menu) X Edit X R
1 Use HI to select an image.
1 Use HI to select an image.
2 Use FG to select the size, and press the Q button.
2 Aim the microphone toward the sound source.
Microphone
3 Press the Q button.
● Recording starts.
● The camera adds (records) sound for approx.
4 seconds while playing back the image.
38 EN
For information on using the menus, see “Using the Menu” (p. 4).
Retouuching images [Perfect Fix]
Erasing images [Erase]
q(Playback menu) X Edit X Perfect Fix
q(Playback menu) X Erase
Depending on the picture, the editing may not be
effective.
Submenu 1
All Erase
Application
All images in the internal memory or
card will be erased.
The retouching process may lower the image
resolution.
Images are individually selected and
erased.
Sel. Image
Erase
Submenu 1
Application
[Lighting Fix] and [Redeye Fix] are
applied together.
Deletes the image displayed.
All
Only sections darkened by
backlighting and dim lighting are
brightened.
When erasing pictures in a internal memory, do not
insert the card into the camera.
Lighting Fix
Redeye Fix
When erasing pictures from the card, insert a card
into the camera in advance.
Eyes that are reddened by the flash
are corrected.
To erase all images [All Erase]
1 Use FG to select [All Erase], and press the
Q button.
1 Use FG to select a correction method, and press the
Q button.
2 Use HI to select an image for retouching, and press
the Q button.
2 Use FG to select [Yes], and press the Q button.
● The retouched image is saved as a separate
image.
To individually select and erase images
[Sel. Image]
1 Use FG to select [Sel. Image], and press the
Q button.
2 Use HI to select the image to be erased, and press
the Q button to add a R mark to the image.
● Press the W zoom button to display an index view.
Images can be quickly selected using FGHI.
Press the T button to return to the single frame
display.
Sel. Image
R mark
OK
MENU
Erase/Cancel
EN 39
For information on using the menus, see “Using the Menu” (p. 4).
3 Repeat Step 2to select the images to be erased,
Rotating images [y]
and then press the m button to erase the selected
q(Playback menu) X y
images.
4 Use FG to select [Yes], and press the Q button.
1 Use HI to select an image.
● The images with a R mark are erased.
2 Press the Q button to rotate the image.
3 If necessary, repeat Steps 1and 2to make settings
for other images, and press the m button.
The new picture orientations will be saved even after
the power is turned off.
Savingg print settings to the image data
[Print Order]
q(Playback menu) X Print Order
“Print Reservations (DPOF)” (p. 51)
Print reservation can be set only for still images that
are recorded to the card.
Protectiing images [?]
q(Playback menu) X ?
Protected images cannot be erased by [Erase] (p. 24,
39), [Sel. Image], or [All Erase] (p. 39), but all images
are erased by [Memory Format]/[Format] (p. 41).
1 Use HI to select an image.
2 Press the Q button.
● Press the Q button again to cancel the settings.
3 If necessary, repeat Steps 1and 2to protect other
images, and press the m button.
40 EN
For information on using the menus, see “Using the Menu” (p. 4).
Menus for OOther Caamera Seettings
Erasing data completely
[Memoryy Formaat]/[FFormat]
Selectting a method for connecting the
cameraa to othher devvices
[USB Connnection]
r (Settings 1) X Memory Format/Format
r (Settings 1) X USB Connection
Before formatting, check that no important data is left
in the internal memory or card.
Submenu 2
Auto
Application
Cards must be formatted with this camera before
first use or after being used with other cameras or
computers.
When the camera is connected to
another device, the settings selection
screen is displayed.
Submenu 2
Yes
No
Application
Select when transferring images to a
computer or when using the supplied
software with the camera connected
to a computer.
Completely erases the image data
in the internal memory*1 or card
(including protected images).
Storage
Select when transferring images to
a computer running Windows Vista
or Windows 7 without using the
supplied software.
Cancels formatting.
MTP
Print
*1
Be sure to remove the card before formatting the
internal memory.
Select when connecting to a
PictBridge-compatible printer.
Copying images in the internal memory
to the card [Backup]
Copying pictures to a computer without
r (Settings 1) X Backup
using the supplied software
Submenu 2
Yes
No
Application
This camera is compatible with the USB Mass
Storage Class. You can transfer and save the image
data on your computer while the camera and the
computer are connected.
Backs up image data in the internal
memory to the card.
Cancels the backup.
Systemm requuirements
It takes some time to back up data. Check that
the battery has sufficient power before starting the
backup.
Windows XP (Service Pack 1 or later)/
Windows
Windows Vista/Windows 7
Macintosh
Mac OS X v10.3 or later
EN 41
For information on using the menus, see “Using the Menu” (p. 4).
Even if a computer has USB ports, proper operation
Saving the mode when the camera is
is not guaranteed in the following cases.
K
turned off [Keep
Settings]
● computers with USB ports installed using an
expansion card, etc.
K
r (Settings 1) X Keep
Settings
● computers without a factory-installed OS and
home-built computers
Submenu 2
Application
The shooting mode is saved when
the camera is turned off and is
reactivated the next time the camera
is turned on.
Turning on the camera with the q
Yes
No
button [qPower On]
r (Settings 1) X qPower On
The shooting mode is set to P mode
when the camera is turned on.
Submenu 2
Application
The camera is not turned on. To turn
on the camera, press the n
button.
No
Choosing the opening screen display
[Pw On Setup]
Press and hold the qbutton to turn
the camera on in playback mode.
Yes
r (Settings 1) X Pw On Setup
Submenu 2
Application
Off
On
No opening screen is displayed.
The opening screen is displayed
when the camera is turned on.
42 EN
For information on using the menus, see “Using the Menu” (p. 4).
Selectiing the cameera souund and its
Adjusting the brightness of the monitor
volume [Sound Settings]
[s]
r (Settings 1) X Sound Settings
s (Settings 2) X s
Submenu 2
Submenu 3
1/2/3
Application
Submenu 2
Application
Choose the sound
made by camera
controls.
Selects the monitor brightness
depending on the surrounding
brightness.
Sound Type
Bright/Normal
OFF (No Sound)
or 5 levels of
volume
Adjusts the image
playback volume.
qVolume
Choose the volume
of the sound
made by camera
controls.
OFF (No Sound)
or 5 levels of
volume
Volume
Adjusting the CCD and the image
processsing function [Pixel Mapping]
s (Settings 2) X Pixel Mapping
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
To adjust the CCD and the image
processinng function
Press the Q button when [Start] (Submenu 2) is
displayed.
● The camera checks and adjusts the CCD and the
image processing function at the same time.
EN 43
For information on using the menus, see “Using the Menu” (p. 4).
Selectingg a video signal system to match your TV [Video Out]
s (Settings 2) X Video Out
The TV video signal system varies depending on the countries and regions. Before viewing camera images on your
TV, select the video output according to your TV’s video signal type.
Submenu 2
NTSC
PAL
Application
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera iimagess on a TV
1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).
2 Connect the TV and camera.
Multi-connector
Connect to the TV video input
jack (yellow) and audio input
jack (white).
AV cable
(supplied)
Connector
cover
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
For details on changing the input source of the TV, refer to the TV’s instruction manual.
4 Press the qbutton, and use HI to select the image for playback.
Depending on the TV’s settings, the displayed images and information may become cropped.
44 EN
For information on using the menus, see “Using the Menu” (p. 4).
Saving battery ppower between shots
[Power Save]
Setting the date and time [X]
s (Settings 2) X X
s (Settings 2) X Power Save
To select the date display order
1 Press I after setting Minute, and use FG to select
Submenu 2
Application
the date display order.
Off
On
Cancels [Power Save].
When the camera is not being used
for approx. 10 seconds, the monitor
automatically turns off to save battery
power.
X
Y
M
D
Time
Y/M/D
2011.02.26 12:30
Date order
To resume staandby mode
Press any button.
MENU
OK
Cancel
Set
2 Press the Q button to complete the operation.
Changing the display language [W]
“Date, time, time zone, and language” (p. 17)
s (Settings 2) X W
Submenu 2
Languages
Application
The language for the menus and
error messages displayed on the
monitor is selected.
1 Use FGHI to select your language and press the
Q button.
EN 45
For information on using the menus, see “Using the Menu” (p. 4).
Switching between home and travel destination time zones [World TTiimmee]]
s (Settings 2) X World Time
You will not be able to select a time zone using [World Time] if the camera clock has not first been set using [X].
Submenu 2
Submenu 3
Application
The time in the home time zone (the time zone selected for x in
submenu 2).
x
Home/Alternate
The time in the travel destination time zone (the time selected for z in
submenu 2).
z
x*1
—
—
Select the home time zone (x).
z*1, 2
Select the travel destination time zone (z).
*1
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on.
When you select a time zone, the camera automatically calculates the time difference between the selected zone and
the home time zone (x) to display the time in the travel destination time zone (z).
*2
46 EN
Printing
Direct printing (PictBridge*1)
Turn on the printer, and then connect the
printer and camera.
2
By connecting the camera to a PictBridge-compatible
printer, you can print images directly without using a
computer.
Multi-connector
To find out if your printer supports PictBridge, refer to the
printer’s instruction manual.
*1
PictBridge is a standard for connecting digital cameras
and printers of different makers and printing out pictures
directly.
Connector
cover
The printing modes, paper sizes, and other
parameters that can be set with the camera vary
depending on the printer that is used. For details,
refer to the printer’s instruction manual.
USB cable
(supplied)
For details on the available paper types, loading
paper, and installing ink cassettes, refer to the
printer’s instruction manual.
Y button
Printing images at the printer’s
standard settings [Easy Print]
Easy Print Start
Custom Print OK
In the setup menu, set [USB Connection] (p. 41) to
[Print].
Display the image to be printed on the
monitor.
Press I to start printing.
1
3
4
To print another image, use HI to select an
image, and press the Q button.
“Viewing images” (p. 22)
EN 47
To exit printing
After a selected image is displayed on the screen,
disconnect the USB cable from the camera and printer.
Submenu 2
Print
Application
This prints the image selected in
Step 5.
This prints all images stored in the
internal memory or card.
All Print
This prints one image in a multiple
layout format.
Multi Print
All Index
This prints an index of all images
stored in the internal memory or card.
OK
Print
Exit
This prints images based on the print
reservation data on the card.
Print Order*1
Changing the printer’s settings for
printing [Custom Print]
*1
[Print Order] is available only when print reservations
have been made. “Print Reservations (DPOF)” (p. 51)
Use FG to select [Size] (Submenu 3), and
press I.
3
Follow Steps 1 and 2 for [Easy Print] (p. 47),
and press the Q button.
1
2
If the [Printpaper] screen is not displayed, the [Size],
[Borderless], and [Pics/Sheet] are set to the printer’s
standard.
Use FG to select the print mode, and press
the Q button.
Printpaper
Print Mode Select
Print
Size
Borderless
Standard
All Print
Multi Print
All Index
Print Order
Standard
MENU
OK
Back
Set
MENU
OK
Set
Exit
48 EN
To make the detailed printer settings
1 Use FGHI to select the setting, and press the
Q button.
Use FG to select the [Borderless] or [Pics/
Sheet] settings, and press the Q button.
4
Submenu 4
Application
Print Info
The image is printed with a border
around it ([Off]).
The image is printed to fill the entire
paper ([On]).
<x
Date
1
Off/On*1
Without
Without
File Name
P
(The number of
images per sheet
varies depending
on the printer.)
The number of images per sheet
([Pics/Sheet]) is selectable only when
[Multi Print] is selected in Step 2.
MENU
OK
Set
Exit
Submenu 5 Submenu 6
Application
*1
The available settings for [Borderless] vary depending
on the printer.
This selects the number
of prints.
<×
0 to 10
If [Standard] is selected in Steps 3 and 4, the image
is printed at the printer’s standard settings.
Selecting [With] prints the
images with the date.
Selecting [Without] prints the
images without the date.
Date
With/Without
4/30
Selecting [With] prints the file
name on the image.
14M
NORM
FILE
100 0004
’11/02/26 12:30
File Name
With/Without Selecting [Without] does not
print any file name on the
image.
OK
Print
More
Single Print
(Proceeds to
This selects a portion of the
the setting
P
image for printing.
screen.)
Use HI to select an image.
5
6
Press F to make a print reservation for the
current image. Press G to make the detailed
printer settings for the current image.
EN 49
To crop an image [P]
1 Use the zoom buttons to select the size of the cropping
frame, use FGHI to move the frame, and then
press the Q button.
Use FG to select [Print], and press the
Q button.
● Printing starts.
9
● When [Option Set] is selected in [All Print] mode,
[Print Info] screen is displayed.
● When printing is finished, the [Print Mode Select]
screen is displayed.
Print Mode Select
Print
All Print
Multi Print
All Index
Print Order
OK
Set
2 Use FG to select [OK], and press the Q button.
P
MENU
OK
Set
Exit
To cancel printing
1 When [Do Not Remove USB Cable] is displayed, press
the m button, use FG to select [Cancel], and
then press the Q button.
OK
Cancel
MENU
OK
Set
Back
If necessary, repeat Steps 5 and 6 to select
the image to be printed, make the detailed
settings, and set [Single Print].
7
8
Do Not Remove USB Cable
Press the Q button.
MENU
Cancel
Print
Continue
Cancel
Print
Cancel
OK
Set
MENU
OK
Set
Back
Press the m button.
10
11
When the message [Remove USB Cable] is
displayed, disconnect the USB cable from the
camera and printer.
50 EN
Print Reservations (DPOF*1
)
Single-frame print reservations [
<]
In print reservations, the number of prints and date imprint
option are saved in the image on the card. This enables
easy printing at a printer or print shop supporting DPOF
by using only the print reservations on the card without a
computer or a camera.
Display the setup menu.
1
“Using the Menu” (p. 4)
From the playback menu q, select [Print
Order] and then press the Q button.
2
*1
DPOF is a standard for storing automatic printout
information from digital cameras.
Print reservations can be set only for the images
stored on the card. Insert a card with recorded
images before making print reservations.
Print Order
<
U
DPOF reservations set by another DPOF device
cannot be changed by this camera. Make changes
using the original device. Making new DPOF
reservations with this camera will erase the
reservations made by the other device.
MENU
OK
Set
Exit
DPOF print reservations can be made for up to 999
images per card.
Use FG to select [<], and press the
Q button.
3
4/30
0
14M
NORM
FILE
100 0004
’11/02/26 12:30
OK
Set
EN 51
Reserving one print each of all images
on the card [
Use HI to select the image for print
reservation. Use FG to select the quantity.
Press the Q button.
4
U]
Follow Steps 1 and 2 in [<] (p. 51).
1
2
X
Use FG to select [U], and press the Q
button.
No
Date
Time
Follow Steps 5 and 6 in [<].
3
MENU
OK
Set
Resetting all print reservation data
Back
Use FG to select the [X] (date print)
screen option, and press the Q button.
5
Follow Steps 1 and 2 in [<] (p. 51).
1
2
Use FG to select either [<] or [U], and
press the Q button.
Submenu 2
Application
No
This prints the image only.
Print Order Setting
Print Ordered
This prints the image with the
shooting date.
Date
Time
This prints the image with the
shooting time.
Reset
Keep
Print Order
MENU
OK
Set
Back
(
)
1
1
Use FG to select [Reset], and press the
Q button.
3
Set
Cancel
MENU
OK
Set
Back
Use FG to select [Set], and press the
Q button.
6
52 EN
Resetting the print reservation data
for selected images
Follow Steps 1 and 2 in [<] (p. 51).
1
2
Use FG to select [<], and press the
Q button.
Use FG to select [Keep] and press the
Q button.
3
Use HI to select the image with the print
reservation you want to cancel. Use FG to
set the print quantity to “0”.
4
If necessary, repeat Step 4, and then press
the Q button when finished.
5
Use FG to select the [X] (date print)
screen option, and press the Q button.
● The settings are applied to the remaining images
6
with the print reservation data.
Use FG to select [Set], and press the
Q button.
7
EN 53
Usage Tips
If the camera does not work as intended, or if an error
message is displayed on the screen, and you are unsure
of what to do, refer to the information below to fix the
problem(s).
● Press the qbutton to switch to the shooting
mode.
● Wait until #(flash charge) stops blinking before
taking pictures.
Monitor
Troubleshooting
“Difficult to see”.
● Condensation*1 may have occurred. Turn off the
Battery
power, and wait for the camera body to become
acclimated to the surrounding temperature and dry
out before taking pictures.
Dew drops can form in the camera when it is
suddenly taken from a cold location into a warm,
humid room.
“The camera does not work even when batteries are
installed”.
● Insert recharged batteries in the correct direction.
*1
“Inserting the battery and the SD/SDHC memory
card (sold separately)” (p. 12), “Charging the
battery and setting up using the supplied CD”
(p. 13), “Charging the battery with the supplied
USB-AC adapter” (p. 16)
“Vertical lines appear on the screen”.
● This condition may occur when the camera is
pointed at an extremely bright subject under a clear
sky and so on. The lines do not appear, however,
in the final image.
● Battery performance may have been reduced
temporarily due to low temperature. Take the
batteries out of the camera, and warm them by
putting them in your pocket for a while.
“The light is caught in the picture”.
● Shooting with flash in dark situations results in an
image with many flash reflections on dust in the air.
Card/Internal memory
“An error message is displayed”.
Date andd time function
“Date and time settings return to the default setting”.
“Error message” (p. 55)
● If the batteries are removed and left out of the
camera for about a day*2, the date and time
settings return to the default setting, and must
be reset.
Shutter button
“No picture is taken when the shutter button is
pressed”.
*2
● Cancel sleep mode.
The time until the date and time settings return to
To save battery power, the camera automatically
goes into sleep mode and the monitor turns off
if there is no operation for 3 minutes when the
camera is turned on. No picture is taken even if
the shutter button is fully pressed in this mode.
Operate the zoom buttons or other buttons to
restore the camera from sleep mode before
taking a picture. If the camera is left for another
12 minutes, it automatically turns off. Press the
n button to turn the camera on.
the default setting varies depending on how long
the batteries have been loaded.
“Date, time, time zone, and language” (p. 17)
54 EN
Miscelllaneouus
“The camera makes a noise when taking pictures”.
Error message
No Picture
Corrective action
Internal memory/Card problem
Take pictures before viewing them.
● The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.
Problem with selected image
Use photo retouch software, etc.
to view the image on a computer.
If the image still cannot be viewed,
the image file is corrupted.
Error message
Picture Error
When one of the messages below is displayed on the
monitor, check the corrective action.
Problem with selected image
Use photo retouch software, etc. to
edit the image on a computer.
Error message
Corrective action
The Image Cannot
Be Edited
Card problem
Insert a new card.
Battery problem
Charge the battery.
Card Error
Battery Empty
No Connection
No Paper
Card problem
The card write-protect switch is
set to the “LOCK” side. Release
the switch.
Connection problem
Connect the camera and computer
or printer correctly.
Write Protect
Memory Full
Internal memory problem
• Insert a card.
Printer problem
Load paper into the printer.
• Erase unwanted images.*1
Card problem
• Replace the card.
Printer problem
Refill the ink in the printer.
• Erase unwanted images.*1
Card Full
No Ink
Card Setup
Card problem
Use FG to select [Format], and
press the Q button. Next, use
FG to select [Yes], and press the
Q button.*2
Printer problem
Remove the jammed paper.
Power Off
Format
Jammed
OK
Set
Printer problem
Return to the status where the
printer can be used.
Settings
Memory Setup
Changed*3
Internal memory problem
Use FG to select [Memory
Format], and press the Q button.
Next, use FG to select [Yes], and
press the Q button.*2
Power Off
Printer problem
Memory Format
Turn off the camera and printer,
check the printer for any problems,
and then turn the power on again.
OK
Set
Print Error
EN 55
Shooting tips
Error message
Cannot Print*4
Corrective action
When you are unsure of how to take a picture that you
envision, refer to the information below.
Problem with selected image
Use a computer to print.
Focusing
*1
Before erasing important images, download them to a
computer.
All data will be erased.
This is displayed, for instance, when the printer’s paper
tray has been removed. Do not operate the printer while
making the print settings on the camera.
This camera may be unable to print images taken by
other cameras.
*2
*3
“Focusing on the subject”
● Taking a picture of a subject not in the center
of the screen
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
*4
Pressing the shutter button halfway (p. 20)
● Set [AF Mode] (p. 35) to [Face/iESP]
● Taking a picture in [AF Tracking] mode (p. 35)
The camera tracks the subject movement
automatically to focus on it continuously.
● Taking a picture of subjects where autofocus
is difficult
In the following cases, after focusing on an object
(by pressing the shutter button halfway down) with
high contrast at the same distance as the subject,
compose the shot, and take the picture.
Subjects with low contrast
When extremely bright objects
appear in the center of the screen
56 EN
Camera shake
Object with no vertical lines*1
“Taking pictures without camera shake”
● Taking pictures using N mode (p. 26)
● Select C (Sport) in s mode (p. 26)
*1
It is also effective to compose the shot by holding the
camera vertically to focus, and then returning to the
horizontal position to take the picture.
The C (Sport) mode uses a fast shutter speed
and can reduce the blur incurred by a moving
subject.
● Taking pictures at a high ISO sensitivity
If a high ISO sensitivity is selected, pictures can
be taken at a high shutter speed even at locations
where a flash cannot be used.
When objects are at different
distances
“Selecting the ISO sensitivity” (p. 32)
Exposure (brightness)
“Taking pictures with the right brightness”
● Taking pictures using [Fill In] (p. 30) flash
A subject against backlight is brightened.
Fast-moving object
● Taking pictures using exposure compensation
(p. 31)
Adjust the brightness while viewing the screen for
taking the picture. Normally, taking pictures of white
subjects (such as snow) results in images that are
darker than the actual subject. Use the exposure
compensation to adjust in the positive (+) direction
to express whites as they appear. When taking
pictures of black subjects, on the other hand, it is
effective to adjust in the negative (-) direction.
The subject is not in the center of
the frame
EN 57
Playback/Editing tips
Color hue
“Taking pictures with colors at the same shade as
they appear”
Playback
● Taking pictures by selecting white balance
(p. 32)
“Playing images in the internal memory and card”
● Remove the card when playing pictures in the
internal memory
Best results in most environments can normally
be obtained with the [WB Auto] setting, but for
some subjects, you should try experimenting
with different settings. (This is especially true for
sunshade under a clear sky, mixed natural and
artificial light settings, and so on.)
“To remove the SD/SDHC memory card” (p. 13)
Editing
“Erasing the sound recorded to a still image”
Image quality
● Record over the sound with silence when
playing back the image
“Adding sound to still images [R]” (p. 38)
“Taking sharper pictures”
● Taking pictures with the optical zoom
Avoid using digital zoom (p. 21, 36) to take
pictures.
● Taking pictures at a low ISO sensitivity
If the picture is taken with a high ISO sensitivity,
noise (small colored spots and color unevenness
that were not in the original image) can occur, and
the image can appear grainy. The resulting image
is grainier than with low ISO sensitivity as well.
“Selecting the ISO sensitivity” (p. 32)
Batteries
“Making batteries last longer”
● Avoid any of the following operations when not
actually taking pictures because they deplete
the battery power
● Repeatedly pressing the shutter button
halfway
● Repeatedly using the zoom
● Set [Power Save] (p. 45) to [On]
58 EN
Appendix
Camera care
The battery and USB-AC adapter
•
This camera uses one Olympus lithium ion battery
(LI-70B). No other type of batteries can be used.
Exterior
•
Wipe gently with a soft cloth. If the camera is very dirty,
soak the cloth in mild soapy water and wring well. Wipe
the camera with the damp cloth and then dry it with a
dry cloth. If you have used the camera at the beach,
use a cloth soaked in clean water and wrung well.
Caution:
There is a risk of explosion if the battery is replaced
with the incorrect battery type.
Dispose of the used battery following the instructions.
(p. 66)
Monitor
•
•
Power consumption by the camera varies depending on
which functions are used.
During the conditions described below, power is
consumed continuously and the battery becomes
exhausted quickly.
•
Wipe gently with a soft cloth.
Lens
•
Blow dust off the lens with a commercial blower, then
wipe gently with a lens cleaner.
•
•
The zoom is used repeatedly.
Battery/USB-AC adapter
The shutter button is pressed halfway repeatedly in
shooting mode, activating the auto focus.
A picture is displayed on the monitor for an extended
period of time.
•
Wipe gently with a soft, dry cloth.
Do not use strong solvents such as benzene or
alcohol, or chemically treated cloth.
•
•
The camera is connected to a printer.
Mold may form on the lens surface if the lens is left
dirty.
•
•
Using an exhausted battery may cause the camera to
turn off without displaying the battery level warning.
The rechargeable battery is not fully charged at the time
of purchase. Use the supplied F-2AC USB-AC adapter
(hereafter referred to as USB-AC adapter) to charge the
battery before use.
Storage
•
When storing the camera for extended periods, remove
the battery, USB-AC adapter and card, and keep in a
cool, dry place that is well ventilated.
•
•
When the included USB-AC adapter is used, charging
usually takes approximately 3 hours (varies on usage).
•
Periodically insert the battery and test the camera
functions.
The supplied USB-AC adapter is for charging and
playback only. Do not take pictures while the USB-AC
adapter is connected to the camera. The camera cannot
playback without the battery even when connected to
the USB-AC adapter.
Avoid leaving the camera in places where chemical
products are handled since this may result in
corrosion.
EN 59
•
•
The included USB-AC adapter is designed to be
used only with this camera. Other cameras cannot be
charged with this USB-AC adapter.
Do not use with other devices.
For plug-in type USB-AC adapter:
Using an SD/SDHC memory card
A card (and internal memory) also corresponds to the
film that records images in a film camera. Otherwise, the
recorded images (data) can be erased, and retouching is
also available with the use of a computer. Cards can be
removed from the camera and exchanged, but this is not
possible with the internal memory. Use of larger capacity
cards enables you to take more pictures.
The included USB-AC adapter is intended to be
correctly orientated in a vertical or floor mount position.
Using your USB-AC adapter abroad
SD/SDHC caard writee-protecct switch
•
The USB-AC adapter can be used in most home
electrical sources within the range of 100 V to 240 V AC
(50/60Hz) around the world. However, depending on the
country or area you are in, the AC wall outlet may be
shaped differently and the USB-AC adapter may require
a plug adapter to match the wall outlet. For details, ask
at your local electrical shop or travel agent.
The SD/SDHC card body has a write-protect switch. If you
set the switch to the “LOCK” side, you will not be able to
write to the card, delete data or format. Release the switch
to enable writing.
•
Do not use travel voltage converters as they could
damage your USB-AC adapter.
LOCK
Cards ccompattible with this camera
SD/SDHC memory cards (visit the Olympus website for
information on memory cards that have been tested and
approved for use)
60 EN
Using a new card
Readouut/recorrding process of the card
Cards must be formatted with this camera before first use
or after being used with other cameras or computers.
[Memory Format]/[Format] (p. 41)
During shooting, the current memory indicator lights in
red while the camera is writing data. Never open the
battery/card compartment cover or unplug the USB cable.
This can not only damage the image data but also render
the internal memory or card unusable.
Checkiing the image savinng location
The memory indicator shows whether the internal memory
or card is being used during shooting and playback.
P
Current memory indicator
v: Internal memory is being used
w: Card is being used
0.0
WB
AUTO
ISO
AUTO
Current memory
#
14M
4
indicator
P
Lights in red
0.0
WB
AUTO
ISO
AUTO
4/30
#
14M
4
Shooting mode
’11/02/26 12:30
Playback mode
Even if [Memory Format]/[Format], [Erase], [Sel.
Image], or [All Erase] is performed, the data in the
card is not completely erased. When disposing of the
card, damage the card to prevent the disclosure of
personal data.
EN 61
Number oof storaabble pictures (still images)/Continuous recording length (movies) in thee
internal memoory and SD/SDHC memorry cards
The figures for the number of storable still pictures and continuous recording length are approximate. The actual
capacity varies with shooting conditions and the card used.
Still images
Number of storable still pictures
Image Size
6 4288×3216
4 3264×2448
n 2560×1920
3 2048×1536
2 1600×1200
1 1280×960
7 640×480
Compression
Internal memory
SD/SDHC memory card (1 GB)
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
6
12
11
128
253
219
21
17
34
28
56
46
92
71
143
287
526
43
85
430
353
683
566
1,122
924
1,848
1,428
2,856
5,712
10,472
860
0 1920×1080
1,698
62 EN
Movies
Continuous recording length
Internal memory SD/SDHC memory card (1 GB)
Image Size
Frame Rate
With sound
Without sound
14 sec.
With sound
4 min. 54 sec.
9 min. 46 sec.
8 min. 53 sec.
Without sound
4 min. 54 sec.
9 min. 49 sec.
8 min. 56 sec.
N
O
N
O
N
O
14 sec.
29 sec.
L
1280×720
29 sec.
26 sec.
26 sec.
8 640×480
53 sec.
53 sec.
17 min. 42 sec. 17 min. 52 sec.
1 min. 14 sec.
2 min. 27 sec.
1 min. 15 sec.
2 min. 30 sec.
24 min. 42 sec.
48 min. 51 sec.
25 min. 0 sec.
50 min. 1 sec.
9 320×240
The maximum file size of a single movie is 2 GB, regardless of the capacity of the card.
Increasinng the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase
the images in the internal memory or card.
[Erase] (p. 24, 39), [Sel. Image] (p. 39), [All Erase] (p. 39), [Memory Format]/[Format] (p. 41)
EN 63
Location — To avoid damage to the product, mount the product
securely on a stable tripod, stand, or bracket.
Power Source — Connect this product only to the power
source described on the product label.
Lightning — If a lightning storm occurs while using a USB-AC
adapter, remove it from the wall outlet immediately.
Foreign Objects — To avoid personal injury, never insert a
metal object into the product.
Heat — Never use or store this product near any heat source
such as a radiator, heat register, stove, or any type of
equipment or appliance that generates heat, including stereo
amplifiers.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE
PERSONNEL.
Handling the Camera
WARNING
Do not use the camera near flammable or explosive gases.
Do not use the flash and LED (such as the AF illuminator) on
people (infants, small children, etc.) at close range.
• You must be at least 1 m (3 ft.) away from the faces of your
subjects. Firing the flash too close to the subject’s eyes could
cause a momentary loss of vision.
Keep young children and infants away from the camera.
• Always use and store the camera out of the reach of young
children and infants to prevent the following dangerous
situations which could cause serious injury:
• Becoming entangled in the camera strap, causing
strangulation.
• Accidentally swallowing the battery, cards or other small
parts.
• Accidentally firing the flash into their own eyes or those of
another child.
• Accidentally being injured by the moving parts of the
camera.
Do not look at the sun or strong lights with the camera.
Do not use or store the camera in dusty or humid places.
Do not cover the flash with a hand while firing.
Use SD/SDHC memory cards only. Never use other types of
cards.
If you accidently insert another type of card into the camera,
contact an authorized distributor or service center. Do not try to
remove the card by force.
An exclamation mark enclosed in a
triangle alerts you to important operating
and maintenance instructions in the
documentation provided with the product.
•
•
DANGER
If the product is used without observing
the information given under this symbol,
serious injury or death may result.
WARNING If the product is used without observing
the information given under this symbol,
injury or death may result.
•
CAUTION
If the product is used without observing
the information given under this symbol,
minor personal injury, damage to the
equipment, or loss of valuable data may
result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT
TO WATER OR OPERATE IN A HIGH HUMIDITY
ENVIRONMENT.
•
•
•
•
General Preccautions
Read All Instructions — Before you use the product, read all
operating instructions. Save all manuals and documentation
for future reference.
Cleaning — Always unplug this product from the wall outlet
before cleaning. Use only a damp cloth for cleaning. Never
use any type of liquid or aerosol cleaner, or any type of
organic solvent to clean this product.
CAUTION
•
Stop using the camera immediately if you notice any unusual
odors, noise, or smoke around it.
• Never remove the batteries with bare hands, which may
cause a fire or burn your hands.
Attachments — For your safety, and to avoid damaging the
product, use only accessories recommended by Olympus.
Water and Moisture — For precautions on products with
weatherproof designs, read the weatherproofing sections.
64 EN
•
•
Never hold or operate the camera with wet hands.
Do not leave the camera in places where it may be subject to
extremely high temperatures.
• Always store batteries out of the reach of small children. If a
child accidentally swallows a battery, seek medical attention
immediately.
• Doing so may cause parts to deteriorate and, in some
circumstances, cause the camera to catch fire.
Do not use the USB-AC adapter if it is covered (such as a
blanket). This could cause overheating, resulting in fire.
Handle the camera with care to avoid getting a low-temperature
burn.
WARNING
• Keep batteries dry at all times.
• To prevent batteries from leaking, overheating, or causing a
fire or explosion, use only batteries recommended for use with
this product.
•
• When the camera contains metal parts, overheating can
result in a low-temperature burn. Pay attention to the
following:
• When used for a long period, the camera will get hot. If you
hold on to the camera in this state, a low-temperature burn
may be caused.
• In places subject to extremely cold temperatures, the
temperature of the camera’s body may be lower than the
environmental temperature. If possible, wear gloves when
handling the camera in cold temperatures.
• Insert the battery carefully as described in the operating
instructions.
• If rechargeable batteries have not been recharged within the
specified time, stop charging them and do not use them.
• Do not use a battery if it is cracked or broken.
• If a battery leaks, becomes discolored or deformed, or
becomes abnormal in any other way during operation, stop
using the camera.
• If a battery leaks fluid onto your clothing or skin, remove the
clothing and flush the affected area with clean, running cold
water immediately. If the fluid burns your skin, seek medical
attention immediately.
•
Be careful with the strap.
• Be careful with the strap when you carry the camera. It could
easily catch on stray objects and cause serious damage.
• Never subject batteries to strong shocks or continuous
vibration.
Batteryy Handliing Precaautionns
CAUTION
Follow these important guidelines to prevent batteries
from leaking, overheating, burning, exploding, or causing
electrical shocks or burns.
• Before loading, always inspect the battery carefully for leaks,
discoloration, warping, or any other abnormality.
• The battery may become hot during prolonged use. To avoid
minor burns, do not remove it immediately after using the
camera.
DANGER
• Always unload the battery from the camera before storing the
camera for a long period.
• The camera uses a lithium ion battery specified by Olympus.
Charge the battery with the specified USB-AC adapter. Do not
use any other USB-AC adapters.
Caution for Usage Environment
• Never heat or incinerate batteries.
• Take precautions when carrying or storing batteries to prevent
them from coming into contact with any metal objects such as
jewelry, pins, fasteners, etc.
• Never store batteries where they will be exposed to direct
sunlight, or subjected to high temperatures in a hot vehicle,
near a heat source, etc.
• To prevent causing battery leaks or damaging their terminals,
carefully follow all instructions regarding the use of batteries.
Never attempt to disassemble a battery or modify it in any
way, solder, etc.
• If battery fluid gets into your eyes, flush your eyes immediately
with clear, cold running water and seek medical attention
immediately.
• To protect the high-precision technology contained in this
product, never leave the camera in the places listed below, no
matter if in use or storage:
• Places where temperatures and/or humidity are high or go
through extreme changes. Direct sunlight, beaches, locked
cars, or near other heat sources (stove, radiator, etc.) or
humidifiers.
• In sandy or dusty environments.
• Near flammable items or explosives.
• In wet places, such as bathrooms or in the rain. When using
products with weatherproof designs, read their manuals
as well.
• In places prone to strong vibrations.
EN 65
• Never drop the camera or subject it to severe shocks or
vibrations.
• When attaching the camera to or removing it from a tripod,
rotate the tripod screw, not the camera.
• Before transporting the camera, remove a tripod and all other
non-OLYMPUS accessories.
• Do not touch electric contacts on cameras.
LCD Monitor
• Do not push the monitor forcibly; otherwise the image may
become vague, resulting in a playback mode failure or damage
to the monitor.
• A strip of light may appear on the top/bottom of the monitor, but
this is not a malfunction.
• When a subject is viewed diagonally in the camera, the
edges may appear zigzagged on the monitor. This is not a
malfunction; it will be less noticeable in playback mode.
• In places subject to low temperatures, the LCD monitor may
take a long time to turn on or its color may change temporarily.
When using the camera in extremely cold places, it is a good
idea to occasionally place it in a warm place. An LCD monitor
exhibiting poor performance due to low temperatures will
recover in normal temperatures.
• The LCD used for the monitor is made with high-precision
technology. However, black spots or bright spots of light
may appear constantly on the LCD Monitor. Due to its
characteristics or the angle at which you are viewing the
monitor, the spot may not be uniform in color and brightness.
This is not a malfunction.
• Do not leave the camera pointed directly at the sun. This may
cause lens or shutter curtain damage, color failure, ghosting on
the CCD, or may possibly cause fires.
• Do not push or pull severely on the lens.
• Before storing the camera for a long period, remove the
batteries. Select a cool, dry location for storage to prevent
condensation or mold from forming inside the camera. After
storage, test the camera by turning it on and pressing the
shutter button to make sure that it is operating normally.
• The camera may malfunction if it is used in a location where
it is subject to a magnetic/electromagnetic field, radio waves,
or high voltage, such as near a TV set, microwave, video
game, loud speakers, large monitor unit, TV/radio tower, or
transmission towers. In such cases, turn the camera off and on
again before further operation.
• Always observe the operating environment restrictions
described in the camera’s manual.
Legal and Other Notices
• Olympus makes no representations or warranties regarding
any damages, or benefit expected by using this unit lawfully,
or any request from a third person, which are caused by the
inappropriate use of this product.
• Olympus makes no representations or warranties regarding
any damages or any benefit expected by using this unit
lawfully which are caused by erasing picture data.
Batteryy Handliing Precaautionns
• This camera uses a lithium ion battery specified by Olympus.
Do not use any other type of battery.
• If the battery’s terminals get wet or greasy, camera contact
failure may result. Wipe the battery well with a dry cloth
before use.
• Always charge a battery when using it for the first time, or if it
has not been used for a long period.
Disclaaimerr oof Warrranty
• When operating the camera with battery power at low
temperatures, try to keep the camera and spare battery
as warm as possible. A battery that has run down at low
temperatures may be restored after it is warmed at room
temperature.
• The number of pictures you can take may vary depending on
the shooting conditions or battery.
• Please recycle batteries to help save our planet’s resources.
When you throw away dead batteries, be sure to cover their
terminals and always observe local laws and regulations.
• Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content of these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or fitness for any
particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss
of business profits, business interruption and loss of business
information) arising from the use or inability to use these
written materials or software or equipment. Some countries do
not allow the exclusion or limitation of liability for consequential
or incidental damages or of the implied warranty, so the above
limitations may not apply to you.
• Olympus reserves all rights to this manual.
66 EN
Use Only Dedicated Rechargeable Battery and
USB-AC adapter
Warning
Unauthorized photographing or use of copyrighted material
may violate applicable copyright laws. Olympus assumes no
responsibility for unauthorized photographing, use or other acts
that infringe upon the rights of copyright owners.
We strongly recommend that you use only the genuine Olympus
dedicated rechargeable battery and USB-AC adapter with this
camera. Using a non-Olympus rechargeable battery and/or
USB-AC adapter may result in fire or personal injury due to
leakage, heating, ignition or damage to the battery. Olympus
does not assume any liability for accidents or damage that may
result from the use of a battery and/or USB-AC adapter that are
not genuine Olympus accessories.
Copyright Notice
All rights reserved. No part of these written materials or this
software may be reproduced or used in any form or by any
means, electronic or mechanical, including photocopying and
recording or the use of any type of information storage and
retrieval system, without the prior written permission of Olympus.
No liability is assumed with respect to the use of the information
contained in these written materials or software, or for damages
resulting from the use of the information contained therein.
Olympus reserves the right to alter the features and contents of
this publication or software without obligation or advance notice.
For customers in North and South America
For customers in USA
Declaration of Conformity
Model Number:
Trade Name:
VG-160
OLYMPUS
Responsible Party:
FCC Notice
Address:
3500 Corporate Parkway, P.O. Box 610,
Center Valley, PA 18034-0610, U.S.A.
• Radio and Television Interference
Changes or modifications not expressly approved by the
Telephone Number: 484-896-5000
•
manufacturer may void the user’s authority to operate this
equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
• This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
• However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-
003.
OLYMPUS WORLDWIDE LIMITED WARRANTY
- IMAGING PRODUCTS
• Adjust or relocate the receiving antenna.
Olympus warrants that the enclosed Olympus® imaging
product(s) and related Olympus® accessories (individually
a “Product” and collectively the “Products”) will be free from
defects in materials and workmanship under normal use and
service for a period of one (1) year from the date of purchase.
If any Product proves to be defective within the one-year
warranty period, the customer must return the defective Product
to any of Olympus Service Centers, following the procedure set
forth below (See “WHAT TO DO WHEN SERVICE IS NEEDED”).
• Increase the distance between the camera and receiver.
• Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician
for help. Only the OLYMPUS-supplied USB cable should
be used to connect the camera to USB enabled personal
computers (PC).
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate it.
EN 67
Olympus, at its sole discretion, will repair, replace, or adjust
the defective Product, provided that Olympus investigation and
factory inspection disclose that (a) such defect developed under
normal and proper use and (b) the Product is covered under this
limited warranty.
Repair, replacement, or adjustment of defective Products shall
be Olympus’s sole obligation and the customer’s sole remedy
hereunder.
EXCEPT FOR THE LIMITED WARRANTY SET FORTH
ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER
REPRESENTATIONS, GUARANTIES, CONDITIONS, AND
WARRANTIES CONCERNING THE PRODUCTS, WHETHER
DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING
UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE
OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY
WARRANTY OR REPRESENTATION AS TO THE SUITABILITY,
DURABILITY, DESIGN, OPERATION, OR CONDITON OF
THE PRODUCTS (OR ANY PART THEREOF) OR THE
MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS
FOR A PARTICULAR PURPOSE, OR RELATING TO THE
INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER
PROPRIETARY RIGHT USED OR INCLUDED THEREIN.
IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF
LAW, THEY ARE LIMITED IN DURATION TO THE LENGTH OF
THIS LIMITED WARRANTY.
The customer is liable and shall pay for shipment of the
Products to the Olympus Service Center.
Olympus shall not be obligated to perform preventive
maintenance, installation, deinstallation, or maintenance.
Olympus reserves the right to (i) use reconditioned, refurbished,
and/or serviceable used parts (that meet Olympus’s quality
assurance standards) for warranty or any other repairs and (ii)
make any internal or external design and/or feature changes
on or to its products without any liability to incorporate such
SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR
LIMITATION OF WARRANTIES AND/OR LIMITATION OF
LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS
MAY NOT APPLY.
THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR
ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM
STATE TO STATE.
changes on or to the Products.
WHAT IS NOT COVERED BY THIS LIMITED
WARRANTY
Excluded from this limited warranty and not warranted by
Olympus in any fashion, either express, implied, or by statute,
are:
THE CUSTOMER ACKNOWLEDGES AND AGREES THAT
OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY
DAMAGES THAT THE CUSTOMER MAY INCUR FROM
DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT
DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA
LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE,
WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT
(INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY)
OR OTHERWISE. IN NO EVENT SHALL OLYMPUS BE LIABLE
FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT
LIMITATION LOSS OF PROFITS OR LOSS OF USE), WHETHER
OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF
THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE.
(a) products and accessories not manufactured by Olympus
and/or not bearing the “OLYMPUS” brand label (the
warranty coverage for products and accessories of other
manufacturers, which may be distributed by Olympus, is the
responsibility of the manufacturers of such products and
accessories in accordance with the terms and duration of
such manufacturers’ warranties);
(b) any Product which has been disassembled, repaired,
tampered with, altered, changed, or modified by persons
other than Olympus’s own authorized service personnel
unless repair by others is made with the written consent of
Olympus;
(c) defects or damage to the Products resulting from wear, tear,
misuse, abuse, negligence, sand, liquids, impact, improper
storage, nonperformance of scheduled operator and
maintenance items, battery leakage, use of non-“OLYMPUS”
brand accessories, consumables, or supplies, or use of the
Products in combination with non-compatible devices;
(d) software programs;
(e) supplies and consumables (including but not limited to
lamps, ink, paper, film, prints, negatives, cables and
batteries); and/or
Representations and warranties made by any person, including
but not limited to dealers, representatives, salespersons, or
agents of Olympus, which are inconsistent or in conflict with
or in addition to the terms of this limited warranty, shall not be
binding upon Olympus unless reduced to writing and approved
by an expressly authorized officer of Olympus.
This limited warranty is the complete and exclusive statement of
warranty which Olympus agrees to provide with respect to the
Products and it shall supersede all prior and contemporaneous
oral or written agreements, understandings, proposals, and
communications pertaining to the subject matter hereof.
(f) Products which do not contain a validly placed and recorded
Olympus serial number, unless they are a model on which
Olympus does not place and record serial numbers.
68 EN
This limited warranty is exclusively for the benefit of the original
customer and cannot be transferred or assigned.
For customers in Europe
“CE” mark indicates that this product complies
with the European requirements for safety,
health, environment and customer protection.
“CE” mark cameras are intended for sales in
Europe.
WHAT TO DO WHEN SERVICE IS NEEDED
The customer must transfer any image or other data saved on
a Product to another image or data storage medium and/or
remove any film from the Product prior to sending the Product to
Olympus for service.
This symbol [crossed-out wheeled bin WEEE
Annex IV] indicates separate collection of waste
electrical and electronic equipment in the EU
countries.
Please do not throw the equipment into the
domestic refuse.
Please use the return and collection systems
available in your country for the disposal of
this product.
IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR
SAVING, KEEPING OR MAINTAINING ANY IMAGE OR DATA
SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE,
OR ON ANY FILM CONTAINED WITHIN A PRODUCT
RECEIVED BY IT FOR SERVICE, NOR SHALL OLYMPUS BE
RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY
IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS
BEING PERFORMED (INCLUDING, WITHOUT LIMITATION,
DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES, LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE
AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS
OR IMPAIRMENT.
This symbol [crossed-out wheeled bin
Directive 2006/66/EC Annex II] indicates
separate collection of waste batteries in the
EU countries.
Please do not throw the batteries into the
domestic refuse. Please use the return and
collection systems available in your country for
the disposal of the waste batteries.
Package the Product carefully using ample padding material to
prevent damage in transit and either deliver it to the Authorized
Olympus Dealer that sold you the Product or ship it postage
prepaid and insured to any of our Olympus Service Centers.
When returning Products for service, your package should
include the following:
Provisions of warranty
1
If this product proves to be defective, although it has been
used properly (in accordance with the written Handling
Care and Operating instructions supplied with it), during the
applicable national warranty period and has been purchased
from an authorized Olympus distributor within the business
area of Olympus Europa Holding GmbH as stipulated on
repaired, or at Olympus’s option replaced, free of charge.
To claim under this warranty the customer must take the
product before the end of the applicable national warranty
period to the dealer where the product was purchased or any
other Olympus service station within the business area of
Olympus Europa Holding GmbH as stipulated on the website:
World Wide Guarantee the customer may turn the product in
at any Olympus service station. Please notice that not in all
countries such Olympus service station exists.
1
2
Sales receipt showing date and place of purchase.
Copy of this limited warranty bearing the Product serial
number corresponding to the serial number on the
Product (unless it is a model on which Olympus does not
place and record serial numbers).
3
4
A detailed description of the problem.
Sample prints, negatives, digital prints (or files on disk) if
available and related to the problem.
When service is completed, the Product will be returned to you
postage prepaid.
WHERE TO SEND PRODUCT FOR SERVICE
See “WORLDWIDE WARRANTY” for the nearest service center.
INTERNATIONAL WARRANTY SERVICE
International warranty service is available under this warranty.
2
The customer shall transport the product to the dealer or
Olympus authorized service station at his own risk and shall
be responsible for any costs incurred in transporting the
product.
EN 69
4
Olympus’s sole liability under this Guarantee shall be limited
to repairing or replacing the product. Any liability under the
Guarantee for indirect or consequential loss or damage of
any kind incurred or suffered by the customer due to a defect
of the product, and in particular any loss or damage caused
to any lenses, films, other equipment or accessories used
with the product or for any loss resulting from a delay in repair
or loss of data, is excluded. Compelling regulations by law
remain unaffected by this.
Provisions of Guarantee
1
“OLYMPUS IMAGING CORP., Shinjuku Monolith, 2-3-1
Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan grants a
one year World Wide Guarantee. This worldwide Guarantee
must be presented at an Olympus authorized repair service
station before any repair can be made under conditions
of this Guarantee. This Guarantee is valid only if the
Guarantee Certificate and proof of purchase are presented
at the Olympus repair service station. Please note that this
Guarantee is in addition to and does not affect the customer’s
legal warranty rights under the applicable national legislation
governing the sale of consumer goods mentioned above.
This Guarantee does not cover the following and the
customer will be required to pay repair charge, even for
defects occurring within the Guarantee period referred to
above.
Notes regarding Guarantee maintenance
1
This Guarantee will only be valid if the Guarantee Certificate
is duly completed by Olympus or an authorized dealer or
other documents contain sufficient proof. Therefore, please
make sure that your name, the name of the dealer, the
serial number and the year, month and date of purchase
are all completed or the original invoice or the sales receipt
(indicating the dealer’s name, the date of purchase and
product type) is attached to this Guarantee Certificate.
Olympus reserves the right to refuse free-of-charge service
if neither Guarantee Certificate is completed nor the above
document is attached or if the information contained in it is
incomplete or illegible.
2
a. Any defect that occurs due to mishandling (such as an
operation performed that is not mentioned in the Handling
Care or other sections of the instructions, etc.)
b. Any defect that occurs due to repair, modification, cleaning,
etc. performed by anyone other than Olympus or an
Olympus authorized service station.
c. Any defect or damage that occurs due to transport, a fall,
shock, etc. after purchase of the product.
2
Since this Guarantee Certificate will not be re-issued, keep it
in a safe place.
d. Any defect or damage that occurs due to fire, earthquake,
flood damage, thunderbolt, other natural disasters,
environmental pollution and irregular voltage sources.
e. Any defect that occurs due to careless or improper
storage (such as keeping the product under conditions
of high temperature and humidity, near insect repellents
such as naphthalene or harmful drugs, etc.), improper
maintenance, etc.
f. Any defect that occurs due to exhausted batteries, etc.
g. Any defect that occurs due to sand, mud, etc. entering the
inside of the product casing.
h. When the Guarantee Certificate is not returned with the
product.
i. When any alterations whatsoever are made to the
Guarantee Certificate regarding the year, month and date
of purchase, the customer’s name, the dealer’s name, and
the serial number.
j. When proof of purchase is not presented with this
Guarantee Certificate.
This Guarantee applies to the product only; the Guarantee
does not apply to any other accessory equipment, such as
the case, strap, lens cap and batteries.
*
com for the authorized international Olympus service
network.
For customers in Asia
Provisions of warranty
1
lf this product proves to be defective, although it has been
used properly (in accordance with the written Handling Care
and Operating instructions supplied with it), during a period
of up to one year from the date of purchase this product
will be repaired, or at Olympus’s option replaced, free of
charge. To claim under warranty the customer must take the
product and this Warranty certificate before the end of the
one year warranty period to the dealer where the product was
purchased or any Olympus authorized service station listed in
the instructions and request the necessary repairs.
The customer shall transport the product to the dealer or
Olympus authorized service station at his own risk and shall
be responsible for any costs incurred in transporting the
product.
2
3
3
This warranty does not cover the following and the customer
will be required to pay repair charge, even for defects
occurring within the one year period referred to above.
70 EN
a. Any defect that occurs due to mishandling (such as an
operation performed that is not mentioned in the Handling
Care or other sections of the instructions, etc.)
b. Any defect that occurs due to repair, modification, cleaning,
etc. performed by anyone other than Olympus or an
Olympus authorized service station.
Notes regarding warranty maintenance
1
This Warranty will only be valid if the Warranty Certificate is
duly completed by Olympus or the dealer. Make sure that
your name, the name of the dealer, the serial number and the
year, month and date of purchase are all completed.
Since this Warranty Certificate will not be re-issued, keep it in
a safe place.
Any request for repair by a customer in same country where
the product was purchased shall be subject to the terms
of the warranty issued by the Olympus distributor in that
country. Where the local Olympus distributor does not issue a
separate warranty or where the customer is not in the country
where the product was purchased the terms of this worldwide
warranty shall apply.
2
3
c. Any defect or damage that occurs due to transport, a falI,
shock, etc. after purchase of the product.
d. Any defect or damage that occurs due to fire, earthquake,
flood damage, thunderbolt, other natural disasters,
environmental pollution and irregular voltage sources.
e. Any defect that occurs due to careless or improper
storage (such as keeping the product under conditions
of high temperature and humidity, near insect repellents
such as naphthalene or harmful drugs, etc.), improper
maintenance, etc.
4
Where applicable, this Warranty is valid worldwide. The
Olympus authorized service stations listed in this Warranty
will gladly honor it.
f. Any defect that occurs due to exhausted batteries, etc.
g. Any defect that occurs due to sand, mud, etc. entering the
inside of the product casing.
*
Please refer to the appended list for the authorized
international Olympus service network.
h. When this Warranty Certificate is not returned with the
product.
Disclaimer of Warranty
i. When any alterations whatsoever are made to the
Warranty Certificate regarding the year, month and date of
purchase, the customer’s name, the dealer’s name, and
the serial number.
j. When proof of purchase is not presented with this
Warranty Certificate.
This Warranty applies to the product only; the Warranty does
not apply to any other accessory equipment, such as the
case, strap, lens cap and batteries.
Olympus’ sole liability under this warranty shall be limited to
repairing or replacing the product and any liability for indirect
or consequential loss or damage of any kind incurred or
suffered by the customer due to a defect in the product, and
in particular any loss or damage caused to any film or lenses
or other equipment or accessories used with the product or
for any loss resulting from delay in repair, is excluded.
Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content if these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or fitness for any
particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss
of business profits, business interruption and loss of business
information) arising from the use of inability to use these written
materials or software. Some states do not allow the exclusion or
limitation of liability for consequential or incidental damages, so
the above limitations may not apply to you.
4
5
Trademarks
• IBM is a registered trademark of International Business
Machines Corporation.
• Microsoft and Windows are registered trademarks of Microsoft
Corporation.
• Macintosh is a trademark of Apple Inc.
• SDHC logo is a trademark.
Notes;
1
This Warranty is in addition to and does not affect the
customer’s statutory right.
• All other company and product names are registered
trademarks and/or trademarks of their respective owners.
• The standards for camera file systems referred to in this
manual are the “Design rule for Camera File system/DCF”
standards stipulated by the Japan Electronics and Information
Technology Industries Association (JEITA).
2
lf you have any queries regarding this Warranty, call any
of the Olympus authorized service stations listed in the
instructions.
EN 71
The software in this camera may include third party software.
Any third party software is subject to the terms and conditions,
imposed by the owners or licensors of that software, under
which such software is provided to you. Those terms and other
third party software notices, if any, may be found in the software
notice PDF file stored within the accompanying CD-ROM or at
notice/notice.cfm
72 EN
SPECIFICATIONS
Camera
Product type
:
:
Digital camera (for shooting and displaying)
Recording system
Still pictures
Digital recording, JPEG (in accordance with Design rule for Camera File system
(DCF))
Applicable standards
Sound with still pictures
Movie
:
:
:
:
:
:
:
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge
Wave format
AVI Motion JPEG
Memory
Internal memory, SD/SDHC memory card
14,000,000 pixels
No. of effective pixels
Image pickup device
Lens
1/2.3” CCD (primary color filter)
Olympus lens 4.7 to 23.5 mm, f2.8 to 6.5
(equivalent to 26 to 130 mm on a 35 mm camera)
Photometric system
Shutter speed
:
:
:
Digital ESP metering system
4 to 1/2000 sec.
Shooting range
0.6 m (2.0 ft.) to (W), 1.0 m (3.3 ft.) to (T) (normal)
0.2 m (0.7 ft.) to (W), 0.6 m (2.0 ft.) to (T) (macro mode)
0.05 m (0.16 ft.) to (super macro mode)
Monitor
:
:
:
3.0” TFT color LCD display, 230,000 dots
Multi-connector (USB connector, A/V OUT jack)
2000 up to 2099
Connector
Automatic calendar system
Operating environment
Temperature
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Humidity
Power supply
Dimensions
:
:
:
30 % to 90 % (operation)/10 % to 90 % (storage)
One Olympus lithium ion battery (LI-70B)
96.0 mm (W) × 56.5 mm (H) × 19.3 mm (D) (3.8 × 2.2 × 0.8 in.) (excluding
protrusions)
Weight
:
125 g (4.4 oz) (including battery and card)
EN 73
Lithium ion battery (LI-70B)
Product type
:
:
:
:
Lithium ion rechargeable battery
DC 3.6 V
Standard voltage
Standard capacity
Battery life
650 mAh
Approx. 300 full charges (varies on usage)
Operating environment
Temperature
:
0°C to 40°C (32°F to 104°F) (charging)/
-10°C to 60°C (14°F to 140°F) (operation)/
-20°C to 35°C (-4°F to 95°F) (storage)
USB-AC adapter (F-2AC)
Power requirements
Operating environment
Temperature
:
:
AC 100 to 240 V (50/60 Hz)
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Design and specifications subject to change without notice.
74 EN
VM157601
|