Symbols used in this manual
Correct
Incorrect
Operation
Operation order
Lamp on
Two-step operation
Automatic
operation
Attention
Order
PREPARATION
As the power u n it, the M. 15V Ni-Cd Control Pack 1 is illustrated.
Inserting the Batteries
"36" turns on.
LR44/SR44
4
Connecting the Power Unit
Attaching to the Camera
1 . Remove the motor drive socket cap.
5
2 . Store the removed cap.
3 . Turn the fastening screw clockwise.
* The cap of OM-1 or OM-2 cannot be stored.
* If there is clearance, shake the motor drive slightly
a n d fit it tig h tly .
Detaching the Motor Drive
4. Set the mode selector to SINGLE or SEQUENCE.
1 . Set the mode selector to OFF.
7
2.
3.
* The motor cover should alw ays be attached if you
are not shooting w ith the m otor drive.
Operating the Motor Drive 2 with the OIM-4
Loading the Film
1.
2.
10
4
.
Press the shutter release.
3.
T h e film w ill a u to m a tic a lly advance tw o fram es
w ith o u t ta k in g pictures.
T h e film advance release w ilt a u to m a tic a lly stop.
Rewinding the Film
T u rn th e lever u n til it stops.
1 . Push R b u tto n .
W hen re w in d in g is co m p le te d , th e m otor w ill a u to -
m a tic a lly sto p .
12
4 . R em ove the film .
3.
13
Operating the Motor Drive 2 with the OM-20 (OM-G) or OM-30 (OM-F)
14
Loading the Film
15
4. Press the shutter release.
3.
The film w il I autom atically advance tw o fra m e s
w ith o u t ta k in g p ic tu re s .
The film advance release w ill automatically stop.
16
Rewinding the Film
2.
R ew ind u n til the tension is released.
17
3.
18
Operating the Motor Drive 2 with the OM-2N (OM-1N)
19
Loading the Film
2.
1.
20
4 . Make tw o blind shots.
3.
21
Set the exposure counter to "36"
Press the shutter release.
5
.
Push th e reset b u tto n .
T h e film advance release w ill a u to m a tica lly sto p .
22
Rewinding the Film
2.
1.
Rewind until the tension is released.
23
4 . Push the reset button.
3.
24
How to prevent automatic stop
Using films that are not a 36-exposure roll.
26
Attaching the Remote Controller
How to illuminate the exposure counter
M. Quartz Remote Controller 1
27
Attaching the strap
Attaching the 250 Film Back 1
28
Care and Storage
Questions and Answers
Q: I have pressed the camera's shutter release.
A: If you then press the shutter release button of
the Motor Drive in the single mode, only the
film advance will be activated. If you press it
in the sequence mode, continuous shooting in-
cluding film advance is possible.
Q: I have operated the camera's shutter release
and film advance lever.
A: You can do these operations on the camera
even when the Motor Drive is attached. The
exposure counter will also operate normally.
Q: There are no batteries inside the Motor Drive.
What can I do?
A: The Motor Drive will operate if the power unit
is connected, but the LCD counter cannot be
used.
Q: I want to use the Motor Drive in low tempera-
tures.
A: In low temperatures, it may not operate pro-
perly because the battery performance will be
reduced. Try to keep its power section warm
by using the Relay Cord, for example.
Q: When rewinding the film, the motor does not
stop even after a certain time.
A: It is because the film is not engaged with the
rewind mechanism. Turn the rewind lever of
the Motor Drive as far as it will go. (The film
29
Description of Controls
1 Shutter Release Button
2 Remote Control Jack
10 Setting Button
11 Reset Button
12 Illumination Button
3 Shutter Release Coupling Pin
4 Film Advance Claw
5 Rewind Claw
6 Camera Coupling
Terminal
13 Rewind Lever
14 250 Film Back
Coupling Terminal
7 Guide Pin
8 Fastening Screw
9 Rewind Coupling Claw
15 LCD Display Window
35
Specifications
Compatible cameras: OM-4, OM-2, OM-1, OM-30
(OM-F),OM-20(OM-G).
Film advance: 5 frames per second maximum con-
tinuous filming without mirror lock-up as well
as single frame advance.
Shutter speed: All available speeds (1/2-1/1000
sec. only in sequence mode with OM-1).
Power supply: M.18V Control Grip 1, 2 (12 AA,
batteries), M. 15V Ni-Cd Control Pack 1, 2
(rechargeable), M. AC Control Box.
Input voltage: DC 18V (AA batteries), 15V (Ni-
Cd), 12-16V (large potentiality DC power
supplies).
Auto film positioning: The film automatically
advances to the shooting position as soon as
the camera back is closed (with OM-20, G, 30,
F, OM-4).
Auto rewinding: The motor automatically stops
when rewinding is completed (with OM-4).
Frame display: Digital LCD display subtractive
counting; two SR44 (or LR44) batteries provide
power for LCD display.
Dimensions: 143 X 77 X 93mm (5.6" X 3.0" X
3.7").
Weight: 360 g. (12.7 oz.).
37
O LYM PUS O PTIC AL CO .,LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan Tel 03-340-2211
O LYM PUS C O R PO R ATIO N
Crossways Park, Woodbury, New York 11797, U.S.A. Tel. 516-364-3000
O LYM PUS O PTIC ALC O .(EU R O PA)G M BH
Postfach 104908, Wendenstrasse 14-16, 2 Hamburg 1. West Germany Tel: 040-23773-0
O LYM PUS O PTIC ALC O .(U .K.) LTD.
2-8 Honduras Street, London EC1Y OTX, England Tel 01-253-2772
I4EMMS2-0184-5MS
|
Oster 2607 User Manual
Olympus CAMERA HOUSING FL 50 User Manual
Nikon 7x50 CF WP COMPASS User Manual
MTX Audio Speaker 622CM User Manual
Metz Mecablitz 34 AF 3N User Manual
Mellerware EXECUTIVE DRAUGHTSMAN BDM001 User Manual
LG Electronics HT355SD A2 User Manual
Lanzar Car Audio LANZAR MAX MXA3000D User Manual
Kambrook Blender KBL70 User Manual
JVC KD LX1 User Manual