Motorola RAZR H3 User Manual

TROUBLESHOOTING  
BEFORE YOU  
BEGIN  
PUT YOUR HEADSET  
IN PAIRING MODE  
CHARGE YOUR  
HEADSET  
1
2
My phone does not find my headset.  
Make sure the blue light on your headset is  
steadily lit when your phone is searching for  
devices (see step 2).  
Start Here > > >  
Before you can use your headset, you must  
pair (link) it with your phone.  
Before using this product, read the Important Safety and  
Legal Information pamphlet and follow its instructions.  
Charge your headset's battery for 2 hours:  
Call Button  
Take a moment before you get started to  
familiarize yourself with your new  
H3 Handsfree Headset.  
My headset worked before but now it's  
not working.  
H3  
Blue Indicator Light  
Make sure your phone is on and the  
Bluetooth feature is turned on in your phone  
(see step 3). If the Bluetooth feature has  
been turned off or was turned on only  
temporarily, you may need to restart the  
Bluetooth feature (see step 3). If you have  
confirmed the Bluetooth feature is on in your  
phone, pair your phone and headset again  
Bluetooth®  
Handsfree Headset  
With the headset power off, press and hold  
the Call button for 6 to 10 seconds until the  
blue indicator light turns on and remains  
steadily lit.  
Note: The blue light will flash as you press and hold the Call  
button. Continue holding down the Call button until the blue  
light is steadily lit.  
Earhook  
Call  
Plug the Motorola charger into the end of  
the headset.  
1
Button  
Get Connected in  
4 Quick Steps  
The blue indicator light turns on when the  
battery is charging. It may take up to 1  
minute for the light to turn on. When the  
headset's battery is fully charged (about 2  
hours), the blue indicator light turns off.  
Volume  
Buttons  
(see step 3).  
1 - CHARGE YOUR  
HEADSET  
Support.  
Note: If you let go of the Call button before the blue light is  
on and steady, ensure that your headset is off before trying  
again.  
2 - PUT HEADSET  
IN PAIR MODE  
3 - PAIR PHONE  
WITH HEADSET  
4 - TEST AND USE  
Blue  
If you need more help, contact us at  
1-877-MOTOBLU or visit us at  
Support.  
Indicator  
Light  
Microphone  
Unplug the charger from the headset.  
2
Note: To turn off headset, see "Turning Headset On/Off" on  
the reverse side of this guide.  
Note: Headset is not functional while charging.  
TURN ON BLUETOOTH  
ON YOUR PHONE AND  
PAIR WITH HEADSET  
TURN ON BLUETOOTH  
ON YOUR PHONE AND  
Motorola, Inc.  
TEST AND USE  
USING YOUR H3  
3
Consumer Advocacy Office  
1307 East Algonquin Road  
Schaumburg, IL 60196  
4
PAIR WITH HEADSET  
Continued  
Your phone's Bluetooth feature is off by  
default. To use your headset, turn on the  
Bluetooth feature in your phone.  
1-877-MOTOBLU  
1-888-390-6456 (TTY/TDD United States for  
hearing impaired)  
See Features and Functions Guide  
on the reverse side  
of this guide  
Your phone and headset are now paired and  
ready to make and receive calls. To confirm  
they are operating properly, make a call:  
Select [Look for Devices].  
7
for information on  
using your H3.  
To turn on Bluetooth:  
Note: Do not select STOP--you will automatically be  
taken to the next screen.  
Place the headset over your ear. See  
"Wearing the Headset" on the reverse side  
of this guide.  
1
Guide Number: 6809498A97-O  
M
Select  
(Menu) > Settings > Connection >  
1
Bluetooth Link > Setup.  
Scroll to Power.  
Press Change.  
Select Motorola H3.  
8
9
On your phone, dial the number you want  
to call and press the Send key.  
2
3
2
3
Select Yes to bond.  
Enter the passkey 0000 and select OK.  
10  
If your phone and headset are successfully  
paired, you will hear ringing on the headset.  
MOTOROLA and the Stylized M Logo are registered in the US  
Patent & Trademark Office. The use of wireless devices and  
their accessories may be prohibited or restricted in certain areas.  
Always obey the laws and regulations on the use of these  
products. The Bluetooth trademarks are owned by their  
proprietor and used by Motorola, Inc. under license. All other  
product or service names are the property of their respective  
owners.  
When your headset and phone are successfully  
paired, the blue light on your headset will  
change from steadily lit to flashing.  
Select On.  
4
5
6
After you have successfully paired your phone  
and headset, you do not need to repeat these  
initial setup steps each time you use the  
headset.  
Select Back.  
Select Handsfree.  
Note: This procedure is for most Motorola phones. For other  
phones, see your phone's user's guide or visit  
New Product.  
© Motorola, Inc. 2005.  

Philips WKR 9300 User Manual
Philips SCB4375NB User Manual
Olympus Camcorder D 300L User Manual
O'Brien DART I 2101519 User Manual
Motorola H670 User Manual
Miller Camera Support 1630 User Manual
Lochinvar COPPER FIN II G936199 User Manual
Listen Technologies LA 322 User Manual
Lanzar Car Audio VCT 2110 User Manual
Kenwood DDX5032 User Manual