BEFOREYOU BEGIN
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H780 Headset.
motorola
H780
Ear
Speaker
Volume
Call
Buttons
Button
Power
Switch
Quick Start Guide
Microphone
Indicator Light/
Microphone
(on side)
Noise
Cancellation
Button
START BLUETOOTH
CHARGE
2
1
Your Headset's Battery
FEATURE
Your Phone
Charge your headset's battery for 2 hours:
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (from home screen):
M
Press
(Menu) > Settings > Connection >
1
Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Plug the Motorola charger into the end of
the headset.
1
2
3
4
5
The indicator light turns red when the battery
is charging. It may take up to 1 minute for
the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns green.
Disconnect the charger.
Press Select to turn on the Bluetooth
feature.The Bluetooth feature remains on
until you turn it off.
2
Note: Headset is not functional while charging.
Note:This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
USING A S
Multipoint technology allows you to make and
receive calls from two Bluetooth enabled
devices like your personal and business phones.
TEST AND USE
4
Your phone and headset are now paired and
ready to make and receive calls.To confirm they
are operating properly, make a call:
To pair a second phone to your headset, follow
these steps:
Place the headset over your ear.
1
2
Turn off any phones or devices that are
On the phone, dial the number you want to
call and press SEND key on your phone.
1
already paired with your headset.
Turn off your headset by turning off the Power
2
If your phone and headset are successfully
paired, you will hear ringing on the headset.
3
switch.
Perform Step 2 (“Start Bluetooth Feature”),
and Step 3 (”Pair”), and Step 4 (”Test and
Use”) to pair your headset with your second
phone.
3
After you have successfully paired your phone
and headset, you don't need to repeat these
steps. For daily use, ensure that your headset is
turned ON and that your phone's Bluetooth
feature is ON.
To reconnect your headset with your first phone
(and thus be connected to both phones), follow
these steps:
Turn on first phone.
1
TIPS FOR USING H780
WITHTWO PHONES
Use the following tips when using H780's
multipoint technology:
ECOND PHONE?
Use your first phone to connect to your
headset.
2
a
On your Motorola phone, press
(Menu)
M
> Settings > Connection > Bluetooth Link >
Audio Devices.
●
Incoming calls can be answered from both
phones:
The phone lists Bluetooth devices it finds.
Select Motorola H780.
– When answering a call, the idle phone is
disconnected from the headset.
b
c
– When the call ends, the idle phone is
automatically reconnected to the headset.
Select OK or Yes.
●
●
Your headset is now connected to both
phones. The last paired phone (your second
phone) is now your primary phone for voice
dial functionality.
After you have successfully paired both phones
with your headset, you don't need to repeat
these steps. For daily use, ensure that your
headset is turned ON and that your phone's
Bluetooth feature is ON.
Last number redial dials the last outgoing call
made from the primary phone.
Voice dial is accessible from your primary device
(last paired phone) by tapping the Call button
and speaking the name after the tone.
●
If your headset does not automatically
reconnect to both phones, turn the H780 off
and on again to reconnect.
USING YOUR H780
See
Features and
Functions Guide
on the reverse side
for information on
using your H780
e
TURNING H780
ON AND OFF
Features and
To turn ON your H780, slide the Power switch
towards the indicator light.The indicator light
first flashes blue for several seconds, then:
Functions Guide
H780
●
flashes blue (if paired and connected with
another device).
Bluetooth®
Handsfree Headset
●
becomes steadily blue (if ready to be paired).
To turn OFF your H780, slide the switch
toward the charging plug (the orange color
under the switch is displayed).The indicator
light will turn off.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H780.
Power
Switch
Indicator
Light
EAR CUSHIONS AND
YOUR HEADSET
WEARINGTHE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear as shown.
Your H780 headset is supplied with multiple ear
cushions.Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your
headset’s earpiece speaker like shown, and
placed onto your ear when using your headset.
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
CHANGING FOR USE
ON OTHER EAR
You can wear your H780 headset on your left or
right ear.The headset comes ready for the right
ear. To change the headset for the left ear:
QUICK BATTERY
CHECK
While turned on and not on a call, you can
check your headset’s battery charge level by
pressing and holding both Volume
buttons.
Gently lift and pull the
top of the earhook up
and off speaker stem, as
shown.
1
Note:This feature does not work when headset is in
pairing mode.
The indicator light displays charge status
until you release the buttons.
Flip the headset over.
2
3
Headset Indicator
AvailableTalkTime
Less than 2 hours
2 to 4.5 hours
Red
Attach the earhook to
the speaker stem, as
shown.
Yellow
Green
Greater than 4.5
hours
NOISE CANCELLATION
BUTTON
European Union Directives
Conformance Statement
Hereby, Motorola declares that
this product is in compliance
with:
Your H780 headset has a noise cancellation
button that enables you to hear the difference
of dual-microphone noise cancellation.
•The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
Product
Product
Approval
Approval
Number
Number
The above gives an example of a typical Product
Approval Number.
Noise
Cancellation
Button
You can view your product’s Declaration of
Conformity (DoC) to Directive 1999/5/EC (to
find your DoC, enter the product Approval
Number from your product’s label in the “Search”
bar on the web site.
Noise cancellation is always on each time a
new call is received or placed.To turn the
feature off (or back on), tap the Noise
Cancellation button while in a call.
MAKING CALLS
MAKING CALLS CONTINUED
Function
Action
Function
Action
Make a voice dial call
(Primary phone)
Tap the Call button
and speak the
name after the tone
Redial last call
Press and hold the
Call button until you
hear a tone
End a call
Tap the Call button,
and hear a
Answer a second
incoming call
Press and hold the
Call button (places
first call on hold), and
hear a tone
high-to-low tone
Answer a call
Tap the Call button,
hear the ring tone,
then a low-to-high
tone
Reject second incoming Press and hold either
call
Volume button until
you hear a tone
Transfer a call from the
headset to the phone
Slide the power
button to the OFF
position
Reject a call
Press and hold either
Volume button until
you hear a tone
Mute or unmute a call
Tap both Volume
buttons until you hear
a mute tone
Note: Some features are phone/network dependent.
Note:Your H780 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
INDICATOR LIGHT
AUDIOTONES
With No Charger Plugged In
AudioTone
Ring tone
Short tone
Headset Status
Headset Indicator
Headset Status
Incoming call
Off
Power off
Phone network not
available
Three blue flashes
Steady blue
Powering on/off
Pairing mode
High to low tone
End call
Quick blue/purple flashes Pairing successful
Two short tones when
pressing Volume button
during a call
Volume at minimum
or maximum
Quick blue flash
Incoming/outgoing call
on primary phone
Quick purple flash
Incoming/outgoing call
on secondary phone
Ascending tone
Mute enabled
Mute reminder
Low tone
(repeated every
15 seconds)
Slow blue pulse
Slow blue flash
Connected (on a call)
Standby (phone
connected--not on a
call)
Descending tone
Low to high tone
Mute disabled
Connection
confirmation/voice
activation
Slow green flash
Standby (two phones
connected--not on a
call)
No audio indications;
deteriorating quality
Out of range
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
Two tones
repeated every minute
Low battery
Note:To disable the indicator light, press and hold both
Volume buttons while turnng headset on.
INDICATOR LIGHT CONTINUED
INDICATOR LIGHT
With No Charger Plugged In
With the Charger Plugged In
Headset Indicator
Headset Status
Headset Indicator
Headset Status
Red
Battery level less
than 50% charge
Red flash
Idle (not connected
to phone)
Yellow
Green
Battery level more
than 50% charge
Slow purple pulse
Quick red flash
Tip: Set your primary and secondary phones to different
ringtones to know which phone is ringing when wearing the
headset. See "Tips for using H780 withTwo Phones" for
more information.
Connected call muted
Low battery
Charging complete
|