INSTA LLATION INSTRUCTIONS FOR PA RT 9 9 -9 10 3
APPLICATIONS
Audi A4 2001-2007
WITH THE CONCERT RADIO
9 9 -9 10 3
KIT FEATURES
• DIN Head Unit Provisions
KIT COMPONENTS
A) Radio Housing
A
TOOLS REQUIRED:
86-9001 Head Unit Removal Keys • Flat Blade Screwdriver
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
9 9 -9 10 3
AUDI A 4 2 0 0 1-2 0 0 7
Disconnect the negative battery terminal
to prevent an accidental short circuit.
1
A
Insert Metra’s 86-9001 into the slots in
the factory head unit and pull the unit out.
2
Figure A
3
Disconnect the wiring.
1
9 9 -9 10 3
DIN He a d Un it P r o v is io n
Slide the DIN cage into the Radio
Housing and secure by bending
the metal locking tabs down.
1
Slide the after-market head unit
into the cage until secure.
2
2
9 9 -9 10 3
FINA L A SSEMBLY
A
B
A)
B)
C)
D)
Strip wire ends back 1/2"
Twist ends together
Solder
C
D
Tape
Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter and making the connections as
shown. (Isolate and individually tape off the
ends of any unused wires to prevent electrical
short circuit) Figure A
1
2
3
Re-connect the negative battery terminal and test
the unit for proper operation.
Snap radio housing assembly into factory radio
opening.
3
9 9 -9 10 3
4
9 9 -9 10 3
5
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION REV. 04-16-09
|