Marshall electronic V R171P HDA User Manual

Marshall Electronics  
1910 East Maple Ave.  
El Segundo, CA 90245  
Tel.: 800-800-6608 • 310-333-0606  
Fax: 310-333-0688  
V-R171P-HDA Users Guide  
Product Overview  
Features  
1
2
3
4
5
6
7
8
9
Specifications  
Operational Setup  
Connectors  
Front Panel Indicators and Controls  
Menu Functions  
Standard Accessories  
Optional Accessories  
Warranty  
Marshall Electronics warranties to the first consumer, that this V-R171P-HDA 17 inch LCD rack mounted monitor will, under normal use, be free from defects in work-  
manship and materials, when received in its original container, for a period of one year from the purchase date.  
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a  
warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.  
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construc-  
tion, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend  
the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.  
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing  
area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.  
Due to constant effort to improve products and product features, specifications may change without notice.  
1
Product Overview  
The V-R171P-HDA is a rack-mounted monitor with a 17”, 5 : 4 aspect ratio active matrix LCD/TFT module. Mount-  
ing can also be achieved via a VESA 75 reinforced mount point on the rear of the unit. The display will produce a  
high-resolution 1280H x 1024W SXGA image from a computer or display scaled video images. Component video,  
Composite video or Y/C (S-video) images are displayed via a scaling chip with a separate DVI-D input for video or  
computer. The unit is designed to fit into an EIA standard 19” rack and occupies 8RU of space. For ease of opera-  
tion the V-R171P-HDA includes front mounted selector buttons for menu operations with On Screen Menu Display  
(OSD) and “ON AIR” tally.  
A U.L. Class 2 power supply is included and the unit is factory ready for rack mount installation.  
2
Features  
• SXGA Resolution 1280 × 1024 pixels, 1.3 million total RGB pixels produce 16.7 million colors  
• Bright 300 candle luminance  
• Compact design fits in EIA standard rack 8U high  
• VESA 75 mount for wall, ceiling or desk top  
• Automatic Gamma Correction  
• 16:9 or 4:3 aspects  
• 4 Preset color temperatures  
• Self-powered tally system  
• NTSC/PAL operation  
• 170° CRT style viewing angles  
• 12 VDC 4-pin XLR power connector with external power supply  
• V-Mount battery adapter  
3
Specifications  
Display (Viewing Area)  
Screen Format  
Resolution (Dots)  
Dot Pitch  
17” (13.30” × 10.64”) (337.92mm x 270.34mm)  
4 x 5  
1280H x 1024V  
0.264 square pixel  
Screen Treatment  
Brightness (in cd/m²)  
Pixel Response  
Viewing Angle  
Backlight  
Anti-Glare and Anti-scratch Hard Coat  
300 cd/m²  
13ms Maximum - Black to White to Black (3ms rise, 10 ms decay)  
75° to 85° From Center  
CCFL 50,000 hour  
500:1  
Contrast Ratio  
System  
NTSC / PAL  
1 S-Video (4 Pin Mini Din), 1 Composite (BNC), 1 SXGA (15P HD-15),  
Component Video (3 BNC), DVI-D (Digital only), Power (4 Pin Male XLR),  
Tally (15 Pin HD-15)  
Inputs  
Rack Mount Dimensions  
Desk Top Dimensions  
Approx. Weight  
19.12”W × 13.8”H × 3.0”D (48.5cm x 35cm x 7.62cm)  
17”W x 13.8”H x 3.0”D (43.2cm x 35cm x 7.62cm)  
12.5 lbs (5.7kg)  
Power Consumption  
Operating Temperature  
12 VDC from included power supply (70Watt Max)  
0°C to 50°C (Storage -20°C to +60°C)  
V-R171P-HDA Ussers Guidde  
2
4
Operational Setup  
1. Unpack the V-R171P-HDA and accompanying power supply. Physically inspect for any damage that may have occurred  
during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not  
located within the continental united states call +1 310-333-0606.  
2. Install in your desired location.  
3. Connect required cables for signal input and output.  
4. Attach battery (Optional) or power connection from power supply to the back of the unit.  
5. Plug the power supply into the A.C. source  
6. Turn on the V-R171P-HDA by depressing the power switch located on the front of the unit.  
Refer to Page 4 picture for location of switch settings.  
7. Perform input selections and screen adjustments as detailed in following sections of this document.  
5
Connectors  
Tally IN HD-15 Female  
Pin1- Green  
Pin2- Red  
Pin3-Amber  
Pin4 Ground  
Pin5- Ground  
Pin6-  
in8-  
Pin 9-  
Pin10-  
Pin11-  
Pin12-  
Pin13-  
Pin14-  
Pin15-  
Pin7-  
12 VDC from  
power supply  
4 Pin Male XLR  
Pin 4 - Pos  
Pin 1- Neg  
Component Video  
75Ω Terminated  
Composite  
Video  
75Ω Terminated  
S-Video IN  
4 Pin Din (Female)  
Pin1 - GND  
Pin2 - GND  
Pin3 – Y in  
Pin4 – C in  
DVI-D In  
SXGA IN  
HD-15 Female  
Pin1-Red IN  
Pin 9-  
Pin2-Grn IN  
Pin10-  
Pin3-Blu IN  
Pin4-  
Pin5-  
Pin11-  
Pin12-  
Pin13-  
Pin6-Gnd  
Pin7-Gnd  
Pin8-Gnd  
Pin14-HSync  
Pin15-VSync  
Marshall Electronics  
3
6
Front Panel Indicators and Controls  
Tally Indicators  
Dual Function EXIT button  
1- Cycles Input selection  
(Selection Displayed lower right of screen)  
2- Exits OSD Menu Mode  
Power On/Off selec- On Screen Display  
UP / DOWN / LEFT / RIGHT  
menu selections for OSD functions  
tion button  
Illuminates dim  
red when power is  
applied.  
(OSD)  
MENU Activation  
Button  
Turns bright red  
when monitor is  
switched on  
7
Menu Functions  
Note: MENU select will toggle through 5 menus, FUNCTION, PICTURE, AUDIO (NOT USED), TV-SETUP and WINDOW  
Function Menu  
Use UP/DOWN/LEFT/RIGHT buttons to select function.  
LANGUAGE-English, French, Spanish  
AUTO ADJUST- Used for PC and DVI signals to auto fit  
image to screen.  
OSD TIME-OUT - Set time in seconds (0 to 60) for OSD  
to drop from screen after last button push  
SLEEP TIMER- Used to automatically turn monitor off  
after programmed delay  
Picture Menu  
Use UP/DOWN/LEFT/RIGHT buttons to select function.  
PSM - (Picture Status Memory) Used only with video signals.  
Select one of four choices  
STANDARD- Default brightness, contrast and color.  
DYNAMIC- Brightness, contrast and color adjusted for changes  
in source video.  
CINEMA- Brightness, contrast and color adjusted for viewing in  
a darkened environment.  
CUSTOM- User defined picture adjustment.  
COLOR TONE- Select from four presets or create a user de-  
fined color temperature.  
CUSTOM- User defined  
COOL 2- 7500°Kelvin  
COOL 1- 7200° Kelvin  
STANDARD- 6900° Kelvin  
WARM 1- 6500° Kelvin  
WARM 2- 6100° Kelvin  
V-R171P-HDA Ussers Guidde  
4
TV SETUP  
Use UP/DOWN/LEFT/RIGHT buttons to select function.  
SEARCH AND TUNE FUNCTIONS ARE NOT USED ON  
THE V-R171P-HDA  
Use CCD functions for VIT close caption display  
WINDOW  
Use UP/DOWN/LEFT/RIGHT buttons to select function.  
ASPECT RATIO -  
Select Fill All to place image on the entire screen.  
All video images will appear distorted  
Select WIDE for 16:9 Aspect  
Select ZOOM 1 for 5:4 Aspect  
Select ZOOM 2 for 4:3 from 16:9  
PIP FUNCTIONS - Used with PC selected as source to  
add a window for video input. (PIP SOURCE)  
PC Formats supported from VGA and DVI connectors  
Video Formats Supported By Component and DVI Inputs  
Resolution  
H Frequency  
( kHz )  
V Frequency  
( Hz )  
Pixel Frequency  
( MHz )  
720x480 Interlaced  
720x576 Interlace  
720x480 Progressive  
15.735 59.94 13.500  
15.735 50.0 13.595  
31.469 59.94 25.175  
640x400  
640x350  
640x350  
640x480  
640x480  
640x480  
640x480  
640x480  
640x480  
720x400  
720x400  
800x600  
800x600  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
1024x768  
1024x768  
1024x768  
1280x720  
1280x768  
1280x768  
1280x960  
1280x960  
1280x1024  
1280x1024  
1280x1024  
1280x1024  
37.861  
85.08  
31.5  
31.469  
37.861  
31.469  
35.000  
34.940  
37.861  
37.500  
43.269  
31.469  
37.927  
35.156  
37.879  
43.764  
48.077  
46.875  
53.674  
48.780  
48.363  
56.476  
57.703  
60.030  
68.677  
47.760  
47.700  
60.150  
60.000  
59.640  
63.337  
63.981  
64.754  
63.600  
70.087  
85.08  
59.94  
66.667  
69.884  
72.809  
75.0  
85.008  
70.087  
85.039  
56.25  
60.317  
70.02  
72.188  
75.0  
25.175  
31.5  
25.175  
30.24  
28.513  
29.765  
31.5  
1280x720 Progressive 44.964 59.94 74.176  
1920x1080 Interlaced  
33.750 60.0  
74.25  
36.0  
28.322  
35.5  
Video Formats Supported by  
Composite and S-Video Inputs  
36.0  
40.0  
45.513  
50.0  
720x480 Interlaced  
720x576 Interlaced  
15.735  
15.735  
59.94  
50.0  
13.500  
13.595  
49.5  
85.061  
60.001  
60.004  
70.069  
72.039  
75.029  
84.997  
60.0  
56.25  
64.11  
65.0  
75.0  
78.476  
78.75  
94.5  
74.481  
80.136  
102.977  
102.104  
102.104  
108.18  
108.0  
108.992  
108.883  
60.0  
75.0  
60.0  
60.0  
59.978  
60.02  
60.06  
60.0  
Marshall Electronics  
5
8
Standard Accessories  
• Users manual  
Accessories Supplied with the V-R171P-HDA:  
• “Brick” type 12VDC power supply with 4 Pin Female XLR connector  
• “V” Mount battery adapter  
• VESA 75 Mount  
9
Optional Accessories  
Desk Stand  
Use for Desk Top  
Wall Mount  
V-LCD17-TV-WM  
Attaches monitor to Wall  
Ceiling Mount  
Power Adapter Cable  
V-LCD17-TV-CM  
V-PAC-D  
Attaches monitor to ceiling  
Use with Anton Bauer D-type connection  
Power Adapter Cable  
V-PAC-XLR  
Use with Anton Bauer D-type connection  
Sequential  
2 channel charger  
IDX-VL-2Plus  
Combination unit is a 2-channel sequential charger with a  
built-in 60W power supply. Charges 2 ENDURA E series  
batteries in fewer than 5 hours. One 10’ XLR cable included.  
Sequential  
IDX-VL-4  
IDX-VL-4S  
IDX-E7S  
IDX-E7  
Economically charges 4 ENDURA E series batteries in  
under 6 hours using Full Power Charge (FPC) method  
4 channel charger  
Charges 4 ENDURA E series batteries in 2.5 hours or less.  
V-Mount battery pack with 3 LED power Indicator  
Simultaneous  
4 channel charger  
55 W Lithium Battery  
V-Mount Battery Pack with PowerLink includes accurate  
Power Status Display and supports Digi-View  
55 W Lithium Battery  
with Power Link  
82 W Lithium Battery  
IDX-E10S  
IDX-E10  
V-Mount battery pack with 3 LED power Indicator.  
82 W Lithium Battery  
with Power Link  
V-Mount Battery Pack with PowerLink includes accurate  
Power Status Display and supports Digi-View  
Analog to Digital  
Converter  
BC-0909-AD  
Converts analog Composite, YC, or Component video to  
HDSDI/SDI  
Digital to Analog  
Converter  
BC-0909-DA  
V-HWP-K  
Converts SDI/HDSDI to analog Composite, YC, or  
Component video  
Cleaning Wipes  
Package of 10 non-toxic, antistatic, alcohol and ammonia  
free cleaning wipes.  

RCA EZ1000BK User Manual
Pioneer DEH P80RSII User Manual
Philips Stereo System MCM1006 User Manual
O'Brien DELTA DOUBLE 2091505 User Manual
Metra Electronics 99 7875 User Manual
Lochinvar Copper Fin II CH 0751 User Manual
KitchenAid 4KFP740CR0 User Manual
Kenwood KDC 3080RA User Manual
Kenwood CASSETTE RECEIVER KRC PS978R User Manual
JVC LYT0415 001A User Manual